1 /* $OpenBSD: if_rsu.c,v 1.17 2013/04/15 09:23:01 mglocker Exp $ */ 2 3 /*- 4 * Copyright (c) 2010 Damien Bergamini <damien.bergamini@free.fr> 5 * 6 * Permission to use, copy, modify, and distribute this software for any 7 * purpose with or without fee is hereby granted, provided that the above 8 * copyright notice and this permission notice appear in all copies. 9 * 10 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 11 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 12 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 13 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 14 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 15 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 16 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 17 */ 18 #include <sys/cdefs.h> 19 __FBSDID("$FreeBSD$"); 20 21 /* 22 * Driver for Realtek RTL8188SU/RTL8191SU/RTL8192SU. 23 * 24 * TODO: 25 * o tx a-mpdu 26 * o hostap / ibss / mesh 27 * o power-save operation 28 */ 29 30 #include "opt_wlan.h" 31 32 #include <sys/param.h> 33 #include <sys/endian.h> 34 #include <sys/sockio.h> 35 #include <sys/malloc.h> 36 #include <sys/mbuf.h> 37 #include <sys/kernel.h> 38 #include <sys/socket.h> 39 #include <sys/systm.h> 40 #include <sys/conf.h> 41 #include <sys/bus.h> 42 #include <sys/firmware.h> 43 #include <sys/module.h> 44 45 #include <net/bpf.h> 46 #include <net/if.h> 47 #include <net/if_var.h> 48 #include <net/if_arp.h> 49 #include <net/if_dl.h> 50 #include <net/if_media.h> 51 #include <net/if_types.h> 52 53 #include <netinet/in.h> 54 #include <netinet/in_systm.h> 55 #include <netinet/in_var.h> 56 #include <netinet/if_ether.h> 57 #include <netinet/ip.h> 58 59 #include <net80211/ieee80211_var.h> 60 #include <net80211/ieee80211_regdomain.h> 61 #include <net80211/ieee80211_radiotap.h> 62 63 #include <dev/usb/usb.h> 64 #include <dev/usb/usbdi.h> 65 #include "usbdevs.h" 66 67 #include <dev/rtwn/if_rtwn_ridx.h> /* XXX */ 68 #include <dev/usb/wlan/if_rsureg.h> 69 70 #define RSU_RATE_IS_CCK RTWN_RATE_IS_CCK 71 72 #ifdef USB_DEBUG 73 static int rsu_debug = 0; 74 SYSCTL_NODE(_hw_usb, OID_AUTO, rsu, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 75 "USB rsu"); 76 SYSCTL_INT(_hw_usb_rsu, OID_AUTO, debug, CTLFLAG_RWTUN, &rsu_debug, 0, 77 "Debug level"); 78 #define RSU_DPRINTF(_sc, _flg, ...) \ 79 do \ 80 if (((_flg) == (RSU_DEBUG_ANY)) || (rsu_debug & (_flg))) \ 81 device_printf((_sc)->sc_dev, __VA_ARGS__); \ 82 while (0) 83 #else 84 #define RSU_DPRINTF(_sc, _flg, ...) 85 #endif 86 87 static int rsu_enable_11n = 1; 88 TUNABLE_INT("hw.usb.rsu.enable_11n", &rsu_enable_11n); 89 90 #define RSU_DEBUG_ANY 0xffffffff 91 #define RSU_DEBUG_TX 0x00000001 92 #define RSU_DEBUG_RX 0x00000002 93 #define RSU_DEBUG_RESET 0x00000004 94 #define RSU_DEBUG_CALIB 0x00000008 95 #define RSU_DEBUG_STATE 0x00000010 96 #define RSU_DEBUG_SCAN 0x00000020 97 #define RSU_DEBUG_FWCMD 0x00000040 98 #define RSU_DEBUG_TXDONE 0x00000080 99 #define RSU_DEBUG_FW 0x00000100 100 #define RSU_DEBUG_FWDBG 0x00000200 101 #define RSU_DEBUG_AMPDU 0x00000400 102 #define RSU_DEBUG_KEY 0x00000800 103 #define RSU_DEBUG_USB 0x00001000 104 105 static const STRUCT_USB_HOST_ID rsu_devs[] = { 106 #define RSU_HT_NOT_SUPPORTED 0 107 #define RSU_HT_SUPPORTED 1 108 #define RSU_DEV_HT(v,p) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, \ 109 RSU_HT_SUPPORTED) } 110 #define RSU_DEV(v,p) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, \ 111 RSU_HT_NOT_SUPPORTED) } 112 RSU_DEV(ASUS, RTL8192SU), 113 RSU_DEV(AZUREWAVE, RTL8192SU_4), 114 RSU_DEV(SITECOMEU, WLA1000), 115 RSU_DEV_HT(ACCTON, RTL8192SU), 116 RSU_DEV_HT(ASUS, USBN10), 117 RSU_DEV_HT(AZUREWAVE, RTL8192SU_1), 118 RSU_DEV_HT(AZUREWAVE, RTL8192SU_2), 119 RSU_DEV_HT(AZUREWAVE, RTL8192SU_3), 120 RSU_DEV_HT(AZUREWAVE, RTL8192SU_5), 121 RSU_DEV_HT(BELKIN, RTL8192SU_1), 122 RSU_DEV_HT(BELKIN, RTL8192SU_2), 123 RSU_DEV_HT(BELKIN, RTL8192SU_3), 124 RSU_DEV_HT(CONCEPTRONIC2, RTL8192SU_1), 125 RSU_DEV_HT(CONCEPTRONIC2, RTL8192SU_2), 126 RSU_DEV_HT(CONCEPTRONIC2, RTL8192SU_3), 127 RSU_DEV_HT(COREGA, RTL8192SU), 128 RSU_DEV_HT(DLINK2, DWA131A1), 129 RSU_DEV_HT(DLINK2, RTL8192SU_1), 130 RSU_DEV_HT(DLINK2, RTL8192SU_2), 131 RSU_DEV_HT(EDIMAX, RTL8192SU_1), 132 RSU_DEV_HT(EDIMAX, RTL8192SU_2), 133 RSU_DEV_HT(EDIMAX, EW7622UMN), 134 RSU_DEV_HT(GUILLEMOT, HWGUN54), 135 RSU_DEV_HT(GUILLEMOT, HWNUM300), 136 RSU_DEV_HT(HAWKING, RTL8192SU_1), 137 RSU_DEV_HT(HAWKING, RTL8192SU_2), 138 RSU_DEV_HT(PLANEX2, GWUSNANO), 139 RSU_DEV_HT(REALTEK, RTL8171), 140 RSU_DEV_HT(REALTEK, RTL8172), 141 RSU_DEV_HT(REALTEK, RTL8173), 142 RSU_DEV_HT(REALTEK, RTL8174), 143 RSU_DEV_HT(REALTEK, RTL8192SU), 144 RSU_DEV_HT(REALTEK, RTL8712), 145 RSU_DEV_HT(REALTEK, RTL8713), 146 RSU_DEV_HT(SENAO, RTL8192SU_1), 147 RSU_DEV_HT(SENAO, RTL8192SU_2), 148 RSU_DEV_HT(SITECOMEU, WL349V1), 149 RSU_DEV_HT(SITECOMEU, WL353), 150 RSU_DEV_HT(SWEEX2, LW154), 151 RSU_DEV_HT(TRENDNET, TEW646UBH), 152 #undef RSU_DEV_HT 153 #undef RSU_DEV 154 }; 155 156 static device_probe_t rsu_match; 157 static device_attach_t rsu_attach; 158 static device_detach_t rsu_detach; 159 static usb_callback_t rsu_bulk_tx_callback_be_bk; 160 static usb_callback_t rsu_bulk_tx_callback_vi_vo; 161 static usb_callback_t rsu_bulk_tx_callback_h2c; 162 static usb_callback_t rsu_bulk_rx_callback; 163 static usb_error_t rsu_do_request(struct rsu_softc *, 164 struct usb_device_request *, void *); 165 static struct ieee80211vap * 166 rsu_vap_create(struct ieee80211com *, const char name[], 167 int, enum ieee80211_opmode, int, const uint8_t bssid[], 168 const uint8_t mac[]); 169 static void rsu_vap_delete(struct ieee80211vap *); 170 static void rsu_scan_start(struct ieee80211com *); 171 static void rsu_scan_end(struct ieee80211com *); 172 static void rsu_getradiocaps(struct ieee80211com *, int, int *, 173 struct ieee80211_channel[]); 174 static void rsu_set_channel(struct ieee80211com *); 175 static void rsu_scan_curchan(struct ieee80211_scan_state *, unsigned long); 176 static void rsu_scan_mindwell(struct ieee80211_scan_state *); 177 static void rsu_update_promisc(struct ieee80211com *); 178 static uint8_t rsu_get_multi_pos(const uint8_t[]); 179 static void rsu_set_multi(struct rsu_softc *); 180 static void rsu_update_mcast(struct ieee80211com *); 181 static int rsu_alloc_rx_list(struct rsu_softc *); 182 static void rsu_free_rx_list(struct rsu_softc *); 183 static int rsu_alloc_tx_list(struct rsu_softc *); 184 static void rsu_free_tx_list(struct rsu_softc *); 185 static void rsu_free_list(struct rsu_softc *, struct rsu_data [], int); 186 static struct rsu_data *_rsu_getbuf(struct rsu_softc *); 187 static struct rsu_data *rsu_getbuf(struct rsu_softc *); 188 static void rsu_freebuf(struct rsu_softc *, struct rsu_data *); 189 static int rsu_write_region_1(struct rsu_softc *, uint16_t, uint8_t *, 190 int); 191 static void rsu_write_1(struct rsu_softc *, uint16_t, uint8_t); 192 static void rsu_write_2(struct rsu_softc *, uint16_t, uint16_t); 193 static void rsu_write_4(struct rsu_softc *, uint16_t, uint32_t); 194 static int rsu_read_region_1(struct rsu_softc *, uint16_t, uint8_t *, 195 int); 196 static uint8_t rsu_read_1(struct rsu_softc *, uint16_t); 197 static uint16_t rsu_read_2(struct rsu_softc *, uint16_t); 198 static uint32_t rsu_read_4(struct rsu_softc *, uint16_t); 199 static int rsu_fw_iocmd(struct rsu_softc *, uint32_t); 200 static uint8_t rsu_efuse_read_1(struct rsu_softc *, uint16_t); 201 static int rsu_read_rom(struct rsu_softc *); 202 static int rsu_fw_cmd(struct rsu_softc *, uint8_t, void *, int); 203 static void rsu_calib_task(void *, int); 204 static void rsu_tx_task(void *, int); 205 static void rsu_set_led(struct rsu_softc *, int); 206 static int rsu_monitor_newstate(struct ieee80211vap *, 207 enum ieee80211_state, int); 208 static int rsu_newstate(struct ieee80211vap *, enum ieee80211_state, int); 209 static int rsu_key_alloc(struct ieee80211vap *, struct ieee80211_key *, 210 ieee80211_keyix *, ieee80211_keyix *); 211 static int rsu_process_key(struct ieee80211vap *, 212 const struct ieee80211_key *, int); 213 static int rsu_key_set(struct ieee80211vap *, 214 const struct ieee80211_key *); 215 static int rsu_key_delete(struct ieee80211vap *, 216 const struct ieee80211_key *); 217 static int rsu_cam_read(struct rsu_softc *, uint8_t, uint32_t *); 218 static void rsu_cam_write(struct rsu_softc *, uint8_t, uint32_t); 219 static int rsu_key_check(struct rsu_softc *, ieee80211_keyix, int); 220 static uint8_t rsu_crypto_mode(struct rsu_softc *, u_int, int); 221 static int rsu_set_key_group(struct rsu_softc *, 222 const struct ieee80211_key *); 223 static int rsu_set_key_pair(struct rsu_softc *, 224 const struct ieee80211_key *); 225 static int rsu_reinit_static_keys(struct rsu_softc *); 226 static int rsu_delete_key(struct rsu_softc *sc, ieee80211_keyix); 227 static void rsu_delete_key_pair_cb(void *, int); 228 static int rsu_site_survey(struct rsu_softc *, 229 struct ieee80211_scan_ssid *); 230 static int rsu_join_bss(struct rsu_softc *, struct ieee80211_node *); 231 static int rsu_disconnect(struct rsu_softc *); 232 static int rsu_hwrssi_to_rssi(struct rsu_softc *, int hw_rssi); 233 static void rsu_event_survey(struct rsu_softc *, uint8_t *, int); 234 static void rsu_event_join_bss(struct rsu_softc *, uint8_t *, int); 235 static void rsu_rx_event(struct rsu_softc *, uint8_t, uint8_t *, int); 236 static void rsu_rx_multi_event(struct rsu_softc *, uint8_t *, int); 237 static int8_t rsu_get_rssi(struct rsu_softc *, int, void *); 238 static struct mbuf * rsu_rx_copy_to_mbuf(struct rsu_softc *, 239 struct r92s_rx_stat *, int); 240 static uint32_t rsu_get_tsf_low(struct rsu_softc *); 241 static uint32_t rsu_get_tsf_high(struct rsu_softc *); 242 static struct ieee80211_node * rsu_rx_frame(struct rsu_softc *, struct mbuf *); 243 static struct mbuf * rsu_rx_multi_frame(struct rsu_softc *, uint8_t *, int); 244 static struct mbuf * 245 rsu_rxeof(struct usb_xfer *, struct rsu_data *); 246 static void rsu_txeof(struct usb_xfer *, struct rsu_data *); 247 static int rsu_raw_xmit(struct ieee80211_node *, struct mbuf *, 248 const struct ieee80211_bpf_params *); 249 static void rsu_rxfilter_init(struct rsu_softc *); 250 static void rsu_rxfilter_set(struct rsu_softc *, uint32_t, uint32_t); 251 static void rsu_rxfilter_refresh(struct rsu_softc *); 252 static int rsu_init(struct rsu_softc *); 253 static int rsu_tx_start(struct rsu_softc *, struct ieee80211_node *, 254 struct mbuf *, struct rsu_data *); 255 static int rsu_transmit(struct ieee80211com *, struct mbuf *); 256 static void rsu_start(struct rsu_softc *); 257 static void _rsu_start(struct rsu_softc *); 258 static int rsu_ioctl_net(struct ieee80211com *, u_long, void *); 259 static void rsu_parent(struct ieee80211com *); 260 static void rsu_stop(struct rsu_softc *); 261 static void rsu_ms_delay(struct rsu_softc *, int); 262 263 static device_method_t rsu_methods[] = { 264 DEVMETHOD(device_probe, rsu_match), 265 DEVMETHOD(device_attach, rsu_attach), 266 DEVMETHOD(device_detach, rsu_detach), 267 268 DEVMETHOD_END 269 }; 270 271 static driver_t rsu_driver = { 272 .name = "rsu", 273 .methods = rsu_methods, 274 .size = sizeof(struct rsu_softc) 275 }; 276 277 DRIVER_MODULE(rsu, uhub, rsu_driver, NULL, NULL); 278 MODULE_DEPEND(rsu, wlan, 1, 1, 1); 279 MODULE_DEPEND(rsu, usb, 1, 1, 1); 280 MODULE_DEPEND(rsu, firmware, 1, 1, 1); 281 MODULE_VERSION(rsu, 1); 282 USB_PNP_HOST_INFO(rsu_devs); 283 284 static uint8_t rsu_wme_ac_xfer_map[4] = { 285 [WME_AC_BE] = RSU_BULK_TX_BE_BK, 286 [WME_AC_BK] = RSU_BULK_TX_BE_BK, 287 [WME_AC_VI] = RSU_BULK_TX_VI_VO, 288 [WME_AC_VO] = RSU_BULK_TX_VI_VO, 289 }; 290 291 /* XXX hard-coded */ 292 #define RSU_H2C_ENDPOINT 3 293 294 static const struct usb_config rsu_config[RSU_N_TRANSFER] = { 295 [RSU_BULK_RX] = { 296 .type = UE_BULK, 297 .endpoint = UE_ADDR_ANY, 298 .direction = UE_DIR_IN, 299 .bufsize = RSU_RXBUFSZ, 300 .flags = { 301 .pipe_bof = 1, 302 .short_xfer_ok = 1 303 }, 304 .callback = rsu_bulk_rx_callback 305 }, 306 [RSU_BULK_TX_BE_BK] = { 307 .type = UE_BULK, 308 .endpoint = 0x06, 309 .direction = UE_DIR_OUT, 310 .bufsize = RSU_TXBUFSZ, 311 .flags = { 312 .ext_buffer = 1, 313 .pipe_bof = 1, 314 .force_short_xfer = 1 315 }, 316 .callback = rsu_bulk_tx_callback_be_bk, 317 .timeout = RSU_TX_TIMEOUT 318 }, 319 [RSU_BULK_TX_VI_VO] = { 320 .type = UE_BULK, 321 .endpoint = 0x04, 322 .direction = UE_DIR_OUT, 323 .bufsize = RSU_TXBUFSZ, 324 .flags = { 325 .ext_buffer = 1, 326 .pipe_bof = 1, 327 .force_short_xfer = 1 328 }, 329 .callback = rsu_bulk_tx_callback_vi_vo, 330 .timeout = RSU_TX_TIMEOUT 331 }, 332 [RSU_BULK_TX_H2C] = { 333 .type = UE_BULK, 334 .endpoint = 0x0d, 335 .direction = UE_DIR_OUT, 336 .bufsize = RSU_TXBUFSZ, 337 .flags = { 338 .ext_buffer = 1, 339 .pipe_bof = 1, 340 .short_xfer_ok = 1 341 }, 342 .callback = rsu_bulk_tx_callback_h2c, 343 .timeout = RSU_TX_TIMEOUT 344 }, 345 }; 346 347 static int 348 rsu_match(device_t self) 349 { 350 struct usb_attach_arg *uaa = device_get_ivars(self); 351 352 if (uaa->usb_mode != USB_MODE_HOST || 353 uaa->info.bIfaceIndex != 0 || 354 uaa->info.bConfigIndex != 0) 355 return (ENXIO); 356 357 return (usbd_lookup_id_by_uaa(rsu_devs, sizeof(rsu_devs), uaa)); 358 } 359 360 static int 361 rsu_send_mgmt(struct ieee80211_node *ni, int type, int arg) 362 { 363 364 return (ENOTSUP); 365 } 366 367 static void 368 rsu_update_chw(struct ieee80211com *ic) 369 { 370 371 } 372 373 /* 374 * notification from net80211 that it'd like to do A-MPDU on the given TID. 375 * 376 * Note: this actually hangs traffic at the present moment, so don't use it. 377 * The firmware debug does indiciate it's sending and establishing a TX AMPDU 378 * session, but then no traffic flows. 379 */ 380 static int 381 rsu_ampdu_enable(struct ieee80211_node *ni, struct ieee80211_tx_ampdu *tap) 382 { 383 #if 0 384 struct rsu_softc *sc = ni->ni_ic->ic_softc; 385 struct r92s_add_ba_req req; 386 387 /* Don't enable if it's requested or running */ 388 if (IEEE80211_AMPDU_REQUESTED(tap)) 389 return (0); 390 if (IEEE80211_AMPDU_RUNNING(tap)) 391 return (0); 392 393 /* We've decided to send addba; so send it */ 394 req.tid = htole32(tap->txa_tid); 395 396 /* Attempt net80211 state */ 397 if (ieee80211_ampdu_tx_request_ext(ni, tap->txa_tid) != 1) 398 return (0); 399 400 /* Send the firmware command */ 401 RSU_DPRINTF(sc, RSU_DEBUG_AMPDU, "%s: establishing AMPDU TX for TID %d\n", 402 __func__, 403 tap->txa_tid); 404 405 RSU_LOCK(sc); 406 if (rsu_fw_cmd(sc, R92S_CMD_ADDBA_REQ, &req, sizeof(req)) != 1) { 407 RSU_UNLOCK(sc); 408 /* Mark failure */ 409 (void) ieee80211_ampdu_tx_request_active_ext(ni, tap->txa_tid, 0); 410 return (0); 411 } 412 RSU_UNLOCK(sc); 413 414 /* Mark success; we don't get any further notifications */ 415 (void) ieee80211_ampdu_tx_request_active_ext(ni, tap->txa_tid, 1); 416 #endif 417 /* Return 0, we're driving this ourselves */ 418 return (0); 419 } 420 421 static int 422 rsu_wme_update(struct ieee80211com *ic) 423 { 424 425 /* Firmware handles this; not our problem */ 426 return (0); 427 } 428 429 static int 430 rsu_attach(device_t self) 431 { 432 struct usb_attach_arg *uaa = device_get_ivars(self); 433 struct rsu_softc *sc = device_get_softc(self); 434 struct ieee80211com *ic = &sc->sc_ic; 435 int error; 436 uint8_t iface_index; 437 struct usb_interface *iface; 438 const char *rft; 439 440 device_set_usb_desc(self); 441 sc->sc_udev = uaa->device; 442 sc->sc_dev = self; 443 sc->sc_rx_checksum_enable = 1; 444 if (rsu_enable_11n) 445 sc->sc_ht = !! (USB_GET_DRIVER_INFO(uaa) & RSU_HT_SUPPORTED); 446 447 /* Get number of endpoints */ 448 iface = usbd_get_iface(sc->sc_udev, 0); 449 sc->sc_nendpoints = iface->idesc->bNumEndpoints; 450 451 /* Endpoints are hard-coded for now, so enforce 4-endpoint only */ 452 if (sc->sc_nendpoints != 4) { 453 device_printf(sc->sc_dev, 454 "the driver currently only supports 4-endpoint devices\n"); 455 return (ENXIO); 456 } 457 458 mtx_init(&sc->sc_mtx, device_get_nameunit(self), MTX_NETWORK_LOCK, 459 MTX_DEF); 460 RSU_DELKEY_BMAP_LOCK_INIT(sc); 461 TIMEOUT_TASK_INIT(taskqueue_thread, &sc->calib_task, 0, 462 rsu_calib_task, sc); 463 TASK_INIT(&sc->del_key_task, 0, rsu_delete_key_pair_cb, sc); 464 TASK_INIT(&sc->tx_task, 0, rsu_tx_task, sc); 465 mbufq_init(&sc->sc_snd, ifqmaxlen); 466 467 /* Allocate Tx/Rx buffers. */ 468 error = rsu_alloc_rx_list(sc); 469 if (error != 0) { 470 device_printf(sc->sc_dev, "could not allocate Rx buffers\n"); 471 goto fail_usb; 472 } 473 474 error = rsu_alloc_tx_list(sc); 475 if (error != 0) { 476 device_printf(sc->sc_dev, "could not allocate Tx buffers\n"); 477 rsu_free_rx_list(sc); 478 goto fail_usb; 479 } 480 481 iface_index = 0; 482 error = usbd_transfer_setup(uaa->device, &iface_index, sc->sc_xfer, 483 rsu_config, RSU_N_TRANSFER, sc, &sc->sc_mtx); 484 if (error) { 485 device_printf(sc->sc_dev, 486 "could not allocate USB transfers, err=%s\n", 487 usbd_errstr(error)); 488 goto fail_usb; 489 } 490 RSU_LOCK(sc); 491 /* Read chip revision. */ 492 sc->cut = MS(rsu_read_4(sc, R92S_PMC_FSM), R92S_PMC_FSM_CUT); 493 if (sc->cut != 3) 494 sc->cut = (sc->cut >> 1) + 1; 495 error = rsu_read_rom(sc); 496 RSU_UNLOCK(sc); 497 if (error != 0) { 498 device_printf(self, "could not read ROM\n"); 499 goto fail_rom; 500 } 501 502 /* Figure out TX/RX streams */ 503 switch (sc->rom[84]) { 504 case 0x0: 505 sc->sc_rftype = RTL8712_RFCONFIG_1T1R; 506 sc->sc_nrxstream = 1; 507 sc->sc_ntxstream = 1; 508 rft = "1T1R"; 509 break; 510 case 0x1: 511 sc->sc_rftype = RTL8712_RFCONFIG_1T2R; 512 sc->sc_nrxstream = 2; 513 sc->sc_ntxstream = 1; 514 rft = "1T2R"; 515 break; 516 case 0x2: 517 sc->sc_rftype = RTL8712_RFCONFIG_2T2R; 518 sc->sc_nrxstream = 2; 519 sc->sc_ntxstream = 2; 520 rft = "2T2R"; 521 break; 522 case 0x3: /* "green" NIC */ 523 sc->sc_rftype = RTL8712_RFCONFIG_1T2R; 524 sc->sc_nrxstream = 2; 525 sc->sc_ntxstream = 1; 526 rft = "1T2R ('green')"; 527 break; 528 default: 529 device_printf(sc->sc_dev, 530 "%s: unknown board type (rfconfig=0x%02x)\n", 531 __func__, 532 sc->rom[84]); 533 goto fail_rom; 534 } 535 536 IEEE80211_ADDR_COPY(ic->ic_macaddr, &sc->rom[0x12]); 537 device_printf(self, "MAC/BB RTL8712 cut %d %s\n", sc->cut, rft); 538 539 ic->ic_softc = sc; 540 ic->ic_name = device_get_nameunit(self); 541 ic->ic_phytype = IEEE80211_T_OFDM; /* Not only, but not used. */ 542 ic->ic_opmode = IEEE80211_M_STA; /* Default to BSS mode. */ 543 544 /* Set device capabilities. */ 545 ic->ic_caps = 546 IEEE80211_C_STA | /* station mode */ 547 IEEE80211_C_MONITOR | /* monitor mode supported */ 548 #if 0 549 IEEE80211_C_BGSCAN | /* Background scan. */ 550 #endif 551 IEEE80211_C_SHPREAMBLE | /* Short preamble supported. */ 552 IEEE80211_C_WME | /* WME/QoS */ 553 IEEE80211_C_SHSLOT | /* Short slot time supported. */ 554 IEEE80211_C_WPA; /* WPA/RSN. */ 555 556 ic->ic_cryptocaps = 557 IEEE80211_CRYPTO_WEP | 558 IEEE80211_CRYPTO_TKIP | 559 IEEE80211_CRYPTO_AES_CCM; 560 561 /* Check if HT support is present. */ 562 if (sc->sc_ht) { 563 device_printf(sc->sc_dev, "%s: enabling 11n\n", __func__); 564 565 /* Enable basic HT */ 566 ic->ic_htcaps = IEEE80211_HTC_HT | 567 #if 0 568 IEEE80211_HTC_AMPDU | 569 #endif 570 IEEE80211_HTC_AMSDU | 571 IEEE80211_HTCAP_MAXAMSDU_3839 | 572 IEEE80211_HTCAP_SMPS_OFF; 573 ic->ic_htcaps |= IEEE80211_HTCAP_CHWIDTH40; 574 575 /* set number of spatial streams */ 576 ic->ic_txstream = sc->sc_ntxstream; 577 ic->ic_rxstream = sc->sc_nrxstream; 578 } 579 ic->ic_flags_ext |= IEEE80211_FEXT_SCAN_OFFLOAD; 580 581 rsu_getradiocaps(ic, IEEE80211_CHAN_MAX, &ic->ic_nchans, 582 ic->ic_channels); 583 584 ieee80211_ifattach(ic); 585 ic->ic_raw_xmit = rsu_raw_xmit; 586 ic->ic_scan_start = rsu_scan_start; 587 ic->ic_scan_end = rsu_scan_end; 588 ic->ic_getradiocaps = rsu_getradiocaps; 589 ic->ic_set_channel = rsu_set_channel; 590 ic->ic_scan_curchan = rsu_scan_curchan; 591 ic->ic_scan_mindwell = rsu_scan_mindwell; 592 ic->ic_vap_create = rsu_vap_create; 593 ic->ic_vap_delete = rsu_vap_delete; 594 ic->ic_update_promisc = rsu_update_promisc; 595 ic->ic_update_mcast = rsu_update_mcast; 596 ic->ic_ioctl = rsu_ioctl_net; 597 ic->ic_parent = rsu_parent; 598 ic->ic_transmit = rsu_transmit; 599 ic->ic_send_mgmt = rsu_send_mgmt; 600 ic->ic_update_chw = rsu_update_chw; 601 ic->ic_ampdu_enable = rsu_ampdu_enable; 602 ic->ic_wme.wme_update = rsu_wme_update; 603 604 ieee80211_radiotap_attach(ic, &sc->sc_txtap.wt_ihdr, 605 sizeof(sc->sc_txtap), RSU_TX_RADIOTAP_PRESENT, 606 &sc->sc_rxtap.wr_ihdr, sizeof(sc->sc_rxtap), 607 RSU_RX_RADIOTAP_PRESENT); 608 609 if (bootverbose) 610 ieee80211_announce(ic); 611 612 return (0); 613 614 fail_rom: 615 usbd_transfer_unsetup(sc->sc_xfer, RSU_N_TRANSFER); 616 fail_usb: 617 mtx_destroy(&sc->sc_mtx); 618 return (ENXIO); 619 } 620 621 static int 622 rsu_detach(device_t self) 623 { 624 struct rsu_softc *sc = device_get_softc(self); 625 struct ieee80211com *ic = &sc->sc_ic; 626 627 rsu_stop(sc); 628 629 usbd_transfer_unsetup(sc->sc_xfer, RSU_N_TRANSFER); 630 631 /* 632 * Free buffers /before/ we detach from net80211, else node 633 * references to destroyed vaps will lead to a panic. 634 */ 635 /* Free Tx/Rx buffers. */ 636 RSU_LOCK(sc); 637 rsu_free_tx_list(sc); 638 rsu_free_rx_list(sc); 639 RSU_UNLOCK(sc); 640 641 /* Frames are freed; detach from net80211 */ 642 ieee80211_ifdetach(ic); 643 644 taskqueue_drain_timeout(taskqueue_thread, &sc->calib_task); 645 taskqueue_drain(taskqueue_thread, &sc->del_key_task); 646 taskqueue_drain(taskqueue_thread, &sc->tx_task); 647 648 RSU_DELKEY_BMAP_LOCK_DESTROY(sc); 649 mtx_destroy(&sc->sc_mtx); 650 651 return (0); 652 } 653 654 static usb_error_t 655 rsu_do_request(struct rsu_softc *sc, struct usb_device_request *req, 656 void *data) 657 { 658 usb_error_t err; 659 int ntries = 10; 660 661 RSU_ASSERT_LOCKED(sc); 662 663 while (ntries--) { 664 err = usbd_do_request_flags(sc->sc_udev, &sc->sc_mtx, 665 req, data, 0, NULL, 250 /* ms */); 666 if (err == 0 || err == USB_ERR_NOT_CONFIGURED) 667 break; 668 RSU_DPRINTF(sc, RSU_DEBUG_USB, 669 "Control request failed, %s (retries left: %d)\n", 670 usbd_errstr(err), ntries); 671 rsu_ms_delay(sc, 10); 672 } 673 674 return (err); 675 } 676 677 static struct ieee80211vap * 678 rsu_vap_create(struct ieee80211com *ic, const char name[IFNAMSIZ], int unit, 679 enum ieee80211_opmode opmode, int flags, 680 const uint8_t bssid[IEEE80211_ADDR_LEN], 681 const uint8_t mac[IEEE80211_ADDR_LEN]) 682 { 683 struct rsu_softc *sc = ic->ic_softc; 684 struct rsu_vap *uvp; 685 struct ieee80211vap *vap; 686 struct ifnet *ifp; 687 688 if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */ 689 return (NULL); 690 691 uvp = malloc(sizeof(struct rsu_vap), M_80211_VAP, M_WAITOK | M_ZERO); 692 vap = &uvp->vap; 693 694 if (ieee80211_vap_setup(ic, vap, name, unit, opmode, 695 flags, bssid) != 0) { 696 /* out of memory */ 697 free(uvp, M_80211_VAP); 698 return (NULL); 699 } 700 701 ifp = vap->iv_ifp; 702 ifp->if_capabilities = IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6; 703 RSU_LOCK(sc); 704 if (sc->sc_rx_checksum_enable) 705 ifp->if_capenable |= IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6; 706 RSU_UNLOCK(sc); 707 708 /* override state transition machine */ 709 uvp->newstate = vap->iv_newstate; 710 if (opmode == IEEE80211_M_MONITOR) 711 vap->iv_newstate = rsu_monitor_newstate; 712 else 713 vap->iv_newstate = rsu_newstate; 714 vap->iv_key_alloc = rsu_key_alloc; 715 vap->iv_key_set = rsu_key_set; 716 vap->iv_key_delete = rsu_key_delete; 717 718 /* Limits from the r92su driver */ 719 vap->iv_ampdu_density = IEEE80211_HTCAP_MPDUDENSITY_16; 720 vap->iv_ampdu_rxmax = IEEE80211_HTCAP_MAXRXAMPDU_32K; 721 722 /* complete setup */ 723 ieee80211_vap_attach(vap, ieee80211_media_change, 724 ieee80211_media_status, mac); 725 ic->ic_opmode = opmode; 726 727 return (vap); 728 } 729 730 static void 731 rsu_vap_delete(struct ieee80211vap *vap) 732 { 733 struct rsu_vap *uvp = RSU_VAP(vap); 734 735 ieee80211_vap_detach(vap); 736 free(uvp, M_80211_VAP); 737 } 738 739 static void 740 rsu_scan_start(struct ieee80211com *ic) 741 { 742 struct rsu_softc *sc = ic->ic_softc; 743 struct ieee80211_scan_state *ss = ic->ic_scan; 744 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 745 int error; 746 747 /* Scanning is done by the firmware. */ 748 RSU_LOCK(sc); 749 sc->sc_active_scan = !!(ss->ss_flags & IEEE80211_SCAN_ACTIVE); 750 /* XXX TODO: force awake if in network-sleep? */ 751 error = rsu_site_survey(sc, ss->ss_nssid > 0 ? &ss->ss_ssid[0] : NULL); 752 RSU_UNLOCK(sc); 753 if (error != 0) { 754 device_printf(sc->sc_dev, 755 "could not send site survey command\n"); 756 ieee80211_cancel_scan(vap); 757 } 758 } 759 760 static void 761 rsu_scan_end(struct ieee80211com *ic) 762 { 763 /* Nothing to do here. */ 764 } 765 766 static void 767 rsu_getradiocaps(struct ieee80211com *ic, 768 int maxchans, int *nchans, struct ieee80211_channel chans[]) 769 { 770 struct rsu_softc *sc = ic->ic_softc; 771 uint8_t bands[IEEE80211_MODE_BYTES]; 772 773 /* Set supported .11b and .11g rates. */ 774 memset(bands, 0, sizeof(bands)); 775 setbit(bands, IEEE80211_MODE_11B); 776 setbit(bands, IEEE80211_MODE_11G); 777 if (sc->sc_ht) 778 setbit(bands, IEEE80211_MODE_11NG); 779 ieee80211_add_channels_default_2ghz(chans, maxchans, nchans, 780 bands, (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40) ? 781 NET80211_CBW_FLAG_HT40 : 0); 782 } 783 784 static void 785 rsu_set_channel(struct ieee80211com *ic) 786 { 787 struct rsu_softc *sc = ic->ic_softc; 788 789 /* 790 * Only need to set the channel in Monitor mode. AP scanning and auth 791 * are already taken care of by their respective firmware commands. 792 */ 793 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 794 struct r92s_set_channel cmd; 795 int error; 796 797 cmd.channel = IEEE80211_CHAN2IEEE(ic->ic_curchan); 798 799 RSU_LOCK(sc); 800 error = rsu_fw_cmd(sc, R92S_CMD_SET_CHANNEL, &cmd, 801 sizeof(cmd)); 802 if (error != 0) { 803 device_printf(sc->sc_dev, 804 "%s: error %d setting channel\n", __func__, 805 error); 806 } 807 RSU_UNLOCK(sc); 808 } 809 } 810 811 static void 812 rsu_scan_curchan(struct ieee80211_scan_state *ss, unsigned long maxdwell) 813 { 814 /* Scan is done in rsu_scan_start(). */ 815 } 816 817 /** 818 * Called by the net80211 framework to indicate 819 * the minimum dwell time has been met, terminate the scan. 820 * We don't actually terminate the scan as the firmware will notify 821 * us when it's finished and we have no way to interrupt it. 822 */ 823 static void 824 rsu_scan_mindwell(struct ieee80211_scan_state *ss) 825 { 826 /* NB: don't try to abort scan; wait for firmware to finish */ 827 } 828 829 static void 830 rsu_update_promisc(struct ieee80211com *ic) 831 { 832 struct rsu_softc *sc = ic->ic_softc; 833 834 RSU_LOCK(sc); 835 if (sc->sc_running) 836 rsu_rxfilter_refresh(sc); 837 RSU_UNLOCK(sc); 838 } 839 840 /* 841 * The same as rtwn_get_multi_pos() / rtwn_set_multi(). 842 */ 843 static uint8_t 844 rsu_get_multi_pos(const uint8_t maddr[]) 845 { 846 uint64_t mask = 0x00004d101df481b4; 847 uint8_t pos = 0x27; /* initial value */ 848 int i, j; 849 850 for (i = 0; i < IEEE80211_ADDR_LEN; i++) 851 for (j = (i == 0) ? 1 : 0; j < 8; j++) 852 if ((maddr[i] >> j) & 1) 853 pos ^= (mask >> (i * 8 + j - 1)); 854 855 pos &= 0x3f; 856 857 return (pos); 858 } 859 860 static u_int 861 rsu_hash_maddr(void *arg, struct sockaddr_dl *sdl, u_int cnt) 862 { 863 uint32_t *mfilt = arg; 864 uint8_t pos; 865 866 pos = rsu_get_multi_pos(LLADDR(sdl)); 867 mfilt[pos / 32] |= (1 << (pos % 32)); 868 869 return (1); 870 } 871 872 static void 873 rsu_set_multi(struct rsu_softc *sc) 874 { 875 struct ieee80211com *ic = &sc->sc_ic; 876 uint32_t mfilt[2]; 877 878 RSU_ASSERT_LOCKED(sc); 879 880 /* general structure was copied from ath(4). */ 881 if (ic->ic_allmulti == 0) { 882 struct ieee80211vap *vap; 883 884 /* 885 * Merge multicast addresses to form the hardware filter. 886 */ 887 mfilt[0] = mfilt[1] = 0; 888 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) 889 if_foreach_llmaddr(vap->iv_ifp, rsu_hash_maddr, &mfilt); 890 } else 891 mfilt[0] = mfilt[1] = ~0; 892 893 rsu_write_4(sc, R92S_MAR + 0, mfilt[0]); 894 rsu_write_4(sc, R92S_MAR + 4, mfilt[1]); 895 896 RSU_DPRINTF(sc, RSU_DEBUG_STATE, "%s: MC filter %08x:%08x\n", 897 __func__, mfilt[0], mfilt[1]); 898 } 899 900 static void 901 rsu_update_mcast(struct ieee80211com *ic) 902 { 903 struct rsu_softc *sc = ic->ic_softc; 904 905 RSU_LOCK(sc); 906 if (sc->sc_running) 907 rsu_set_multi(sc); 908 RSU_UNLOCK(sc); 909 } 910 911 static int 912 rsu_alloc_list(struct rsu_softc *sc, struct rsu_data data[], 913 int ndata, int maxsz) 914 { 915 int i, error; 916 917 for (i = 0; i < ndata; i++) { 918 struct rsu_data *dp = &data[i]; 919 dp->sc = sc; 920 dp->m = NULL; 921 dp->buf = malloc(maxsz, M_USBDEV, M_NOWAIT); 922 if (dp->buf == NULL) { 923 device_printf(sc->sc_dev, 924 "could not allocate buffer\n"); 925 error = ENOMEM; 926 goto fail; 927 } 928 dp->ni = NULL; 929 } 930 931 return (0); 932 fail: 933 rsu_free_list(sc, data, ndata); 934 return (error); 935 } 936 937 static int 938 rsu_alloc_rx_list(struct rsu_softc *sc) 939 { 940 int error, i; 941 942 error = rsu_alloc_list(sc, sc->sc_rx, RSU_RX_LIST_COUNT, 943 RSU_RXBUFSZ); 944 if (error != 0) 945 return (error); 946 947 STAILQ_INIT(&sc->sc_rx_active); 948 STAILQ_INIT(&sc->sc_rx_inactive); 949 950 for (i = 0; i < RSU_RX_LIST_COUNT; i++) 951 STAILQ_INSERT_HEAD(&sc->sc_rx_inactive, &sc->sc_rx[i], next); 952 953 return (0); 954 } 955 956 static int 957 rsu_alloc_tx_list(struct rsu_softc *sc) 958 { 959 int error, i; 960 961 error = rsu_alloc_list(sc, sc->sc_tx, RSU_TX_LIST_COUNT, 962 RSU_TXBUFSZ); 963 if (error != 0) 964 return (error); 965 966 STAILQ_INIT(&sc->sc_tx_inactive); 967 968 for (i = 0; i != RSU_N_TRANSFER; i++) { 969 STAILQ_INIT(&sc->sc_tx_active[i]); 970 STAILQ_INIT(&sc->sc_tx_pending[i]); 971 } 972 973 for (i = 0; i < RSU_TX_LIST_COUNT; i++) { 974 STAILQ_INSERT_HEAD(&sc->sc_tx_inactive, &sc->sc_tx[i], next); 975 } 976 977 return (0); 978 } 979 980 static void 981 rsu_free_tx_list(struct rsu_softc *sc) 982 { 983 int i; 984 985 /* prevent further allocations from TX list(s) */ 986 STAILQ_INIT(&sc->sc_tx_inactive); 987 988 for (i = 0; i != RSU_N_TRANSFER; i++) { 989 STAILQ_INIT(&sc->sc_tx_active[i]); 990 STAILQ_INIT(&sc->sc_tx_pending[i]); 991 } 992 993 rsu_free_list(sc, sc->sc_tx, RSU_TX_LIST_COUNT); 994 } 995 996 static void 997 rsu_free_rx_list(struct rsu_softc *sc) 998 { 999 /* prevent further allocations from RX list(s) */ 1000 STAILQ_INIT(&sc->sc_rx_inactive); 1001 STAILQ_INIT(&sc->sc_rx_active); 1002 1003 rsu_free_list(sc, sc->sc_rx, RSU_RX_LIST_COUNT); 1004 } 1005 1006 static void 1007 rsu_free_list(struct rsu_softc *sc, struct rsu_data data[], int ndata) 1008 { 1009 int i; 1010 1011 for (i = 0; i < ndata; i++) { 1012 struct rsu_data *dp = &data[i]; 1013 1014 if (dp->buf != NULL) { 1015 free(dp->buf, M_USBDEV); 1016 dp->buf = NULL; 1017 } 1018 if (dp->ni != NULL) { 1019 ieee80211_free_node(dp->ni); 1020 dp->ni = NULL; 1021 } 1022 } 1023 } 1024 1025 static struct rsu_data * 1026 _rsu_getbuf(struct rsu_softc *sc) 1027 { 1028 struct rsu_data *bf; 1029 1030 bf = STAILQ_FIRST(&sc->sc_tx_inactive); 1031 if (bf != NULL) 1032 STAILQ_REMOVE_HEAD(&sc->sc_tx_inactive, next); 1033 else 1034 bf = NULL; 1035 return (bf); 1036 } 1037 1038 static struct rsu_data * 1039 rsu_getbuf(struct rsu_softc *sc) 1040 { 1041 struct rsu_data *bf; 1042 1043 RSU_ASSERT_LOCKED(sc); 1044 1045 bf = _rsu_getbuf(sc); 1046 if (bf == NULL) { 1047 RSU_DPRINTF(sc, RSU_DEBUG_TX, "%s: no buffers\n", __func__); 1048 } 1049 return (bf); 1050 } 1051 1052 static void 1053 rsu_freebuf(struct rsu_softc *sc, struct rsu_data *bf) 1054 { 1055 1056 RSU_ASSERT_LOCKED(sc); 1057 STAILQ_INSERT_TAIL(&sc->sc_tx_inactive, bf, next); 1058 } 1059 1060 static int 1061 rsu_write_region_1(struct rsu_softc *sc, uint16_t addr, uint8_t *buf, 1062 int len) 1063 { 1064 usb_device_request_t req; 1065 1066 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 1067 req.bRequest = R92S_REQ_REGS; 1068 USETW(req.wValue, addr); 1069 USETW(req.wIndex, 0); 1070 USETW(req.wLength, len); 1071 1072 return (rsu_do_request(sc, &req, buf)); 1073 } 1074 1075 static void 1076 rsu_write_1(struct rsu_softc *sc, uint16_t addr, uint8_t val) 1077 { 1078 rsu_write_region_1(sc, addr, &val, 1); 1079 } 1080 1081 static void 1082 rsu_write_2(struct rsu_softc *sc, uint16_t addr, uint16_t val) 1083 { 1084 val = htole16(val); 1085 rsu_write_region_1(sc, addr, (uint8_t *)&val, 2); 1086 } 1087 1088 static void 1089 rsu_write_4(struct rsu_softc *sc, uint16_t addr, uint32_t val) 1090 { 1091 val = htole32(val); 1092 rsu_write_region_1(sc, addr, (uint8_t *)&val, 4); 1093 } 1094 1095 static int 1096 rsu_read_region_1(struct rsu_softc *sc, uint16_t addr, uint8_t *buf, 1097 int len) 1098 { 1099 usb_device_request_t req; 1100 1101 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1102 req.bRequest = R92S_REQ_REGS; 1103 USETW(req.wValue, addr); 1104 USETW(req.wIndex, 0); 1105 USETW(req.wLength, len); 1106 1107 return (rsu_do_request(sc, &req, buf)); 1108 } 1109 1110 static uint8_t 1111 rsu_read_1(struct rsu_softc *sc, uint16_t addr) 1112 { 1113 uint8_t val; 1114 1115 if (rsu_read_region_1(sc, addr, &val, 1) != 0) 1116 return (0xff); 1117 return (val); 1118 } 1119 1120 static uint16_t 1121 rsu_read_2(struct rsu_softc *sc, uint16_t addr) 1122 { 1123 uint16_t val; 1124 1125 if (rsu_read_region_1(sc, addr, (uint8_t *)&val, 2) != 0) 1126 return (0xffff); 1127 return (le16toh(val)); 1128 } 1129 1130 static uint32_t 1131 rsu_read_4(struct rsu_softc *sc, uint16_t addr) 1132 { 1133 uint32_t val; 1134 1135 if (rsu_read_region_1(sc, addr, (uint8_t *)&val, 4) != 0) 1136 return (0xffffffff); 1137 return (le32toh(val)); 1138 } 1139 1140 static int 1141 rsu_fw_iocmd(struct rsu_softc *sc, uint32_t iocmd) 1142 { 1143 int ntries; 1144 1145 rsu_write_4(sc, R92S_IOCMD_CTRL, iocmd); 1146 rsu_ms_delay(sc, 1); 1147 for (ntries = 0; ntries < 50; ntries++) { 1148 if (rsu_read_4(sc, R92S_IOCMD_CTRL) == 0) 1149 return (0); 1150 rsu_ms_delay(sc, 1); 1151 } 1152 return (ETIMEDOUT); 1153 } 1154 1155 static uint8_t 1156 rsu_efuse_read_1(struct rsu_softc *sc, uint16_t addr) 1157 { 1158 uint32_t reg; 1159 int ntries; 1160 1161 reg = rsu_read_4(sc, R92S_EFUSE_CTRL); 1162 reg = RW(reg, R92S_EFUSE_CTRL_ADDR, addr); 1163 reg &= ~R92S_EFUSE_CTRL_VALID; 1164 rsu_write_4(sc, R92S_EFUSE_CTRL, reg); 1165 /* Wait for read operation to complete. */ 1166 for (ntries = 0; ntries < 100; ntries++) { 1167 reg = rsu_read_4(sc, R92S_EFUSE_CTRL); 1168 if (reg & R92S_EFUSE_CTRL_VALID) 1169 return (MS(reg, R92S_EFUSE_CTRL_DATA)); 1170 rsu_ms_delay(sc, 1); 1171 } 1172 device_printf(sc->sc_dev, 1173 "could not read efuse byte at address 0x%x\n", addr); 1174 return (0xff); 1175 } 1176 1177 static int 1178 rsu_read_rom(struct rsu_softc *sc) 1179 { 1180 uint8_t *rom = sc->rom; 1181 uint16_t addr = 0; 1182 uint32_t reg; 1183 uint8_t off, msk; 1184 int i; 1185 1186 /* Make sure that ROM type is eFuse and that autoload succeeded. */ 1187 reg = rsu_read_1(sc, R92S_EE_9346CR); 1188 if ((reg & (R92S_9356SEL | R92S_EEPROM_EN)) != R92S_EEPROM_EN) 1189 return (EIO); 1190 1191 /* Turn on 2.5V to prevent eFuse leakage. */ 1192 reg = rsu_read_1(sc, R92S_EFUSE_TEST + 3); 1193 rsu_write_1(sc, R92S_EFUSE_TEST + 3, reg | 0x80); 1194 rsu_ms_delay(sc, 1); 1195 rsu_write_1(sc, R92S_EFUSE_TEST + 3, reg & ~0x80); 1196 1197 /* Read full ROM image. */ 1198 memset(&sc->rom, 0xff, sizeof(sc->rom)); 1199 while (addr < 512) { 1200 reg = rsu_efuse_read_1(sc, addr); 1201 if (reg == 0xff) 1202 break; 1203 addr++; 1204 off = reg >> 4; 1205 msk = reg & 0xf; 1206 for (i = 0; i < 4; i++) { 1207 if (msk & (1 << i)) 1208 continue; 1209 rom[off * 8 + i * 2 + 0] = 1210 rsu_efuse_read_1(sc, addr); 1211 addr++; 1212 rom[off * 8 + i * 2 + 1] = 1213 rsu_efuse_read_1(sc, addr); 1214 addr++; 1215 } 1216 } 1217 #ifdef USB_DEBUG 1218 if (rsu_debug & RSU_DEBUG_RESET) { 1219 /* Dump ROM content. */ 1220 printf("\n"); 1221 for (i = 0; i < sizeof(sc->rom); i++) 1222 printf("%02x:", rom[i]); 1223 printf("\n"); 1224 } 1225 #endif 1226 return (0); 1227 } 1228 1229 static int 1230 rsu_fw_cmd(struct rsu_softc *sc, uint8_t code, void *buf, int len) 1231 { 1232 const uint8_t which = RSU_H2C_ENDPOINT; 1233 struct rsu_data *data; 1234 struct r92s_tx_desc *txd; 1235 struct r92s_fw_cmd_hdr *cmd; 1236 int cmdsz; 1237 int xferlen; 1238 1239 RSU_ASSERT_LOCKED(sc); 1240 1241 data = rsu_getbuf(sc); 1242 if (data == NULL) 1243 return (ENOMEM); 1244 1245 /* Blank the entire payload, just to be safe */ 1246 memset(data->buf, '\0', RSU_TXBUFSZ); 1247 1248 /* Round-up command length to a multiple of 8 bytes. */ 1249 /* XXX TODO: is this required? */ 1250 cmdsz = (len + 7) & ~7; 1251 1252 xferlen = sizeof(*txd) + sizeof(*cmd) + cmdsz; 1253 KASSERT(xferlen <= RSU_TXBUFSZ, ("%s: invalid length", __func__)); 1254 memset(data->buf, 0, xferlen); 1255 1256 /* Setup Tx descriptor. */ 1257 txd = (struct r92s_tx_desc *)data->buf; 1258 txd->txdw0 = htole32( 1259 SM(R92S_TXDW0_OFFSET, sizeof(*txd)) | 1260 SM(R92S_TXDW0_PKTLEN, sizeof(*cmd) + cmdsz) | 1261 R92S_TXDW0_OWN | R92S_TXDW0_FSG | R92S_TXDW0_LSG); 1262 txd->txdw1 = htole32(SM(R92S_TXDW1_QSEL, R92S_TXDW1_QSEL_H2C)); 1263 1264 /* Setup command header. */ 1265 cmd = (struct r92s_fw_cmd_hdr *)&txd[1]; 1266 cmd->len = htole16(cmdsz); 1267 cmd->code = code; 1268 cmd->seq = sc->cmd_seq; 1269 sc->cmd_seq = (sc->cmd_seq + 1) & 0x7f; 1270 1271 /* Copy command payload. */ 1272 memcpy(&cmd[1], buf, len); 1273 1274 RSU_DPRINTF(sc, RSU_DEBUG_TX | RSU_DEBUG_FWCMD, 1275 "%s: Tx cmd code=0x%x len=0x%x\n", 1276 __func__, code, cmdsz); 1277 data->buflen = xferlen; 1278 STAILQ_INSERT_TAIL(&sc->sc_tx_pending[which], data, next); 1279 usbd_transfer_start(sc->sc_xfer[which]); 1280 1281 return (0); 1282 } 1283 1284 /* ARGSUSED */ 1285 static void 1286 rsu_calib_task(void *arg, int pending __unused) 1287 { 1288 struct rsu_softc *sc = arg; 1289 #ifdef notyet 1290 uint32_t reg; 1291 #endif 1292 1293 RSU_DPRINTF(sc, RSU_DEBUG_CALIB, "%s: running calibration task\n", 1294 __func__); 1295 1296 RSU_LOCK(sc); 1297 #ifdef notyet 1298 /* Read WPS PBC status. */ 1299 rsu_write_1(sc, R92S_MAC_PINMUX_CTRL, 1300 R92S_GPIOMUX_EN | SM(R92S_GPIOSEL_GPIO, R92S_GPIOSEL_GPIO_JTAG)); 1301 rsu_write_1(sc, R92S_GPIO_IO_SEL, 1302 rsu_read_1(sc, R92S_GPIO_IO_SEL) & ~R92S_GPIO_WPS); 1303 reg = rsu_read_1(sc, R92S_GPIO_CTRL); 1304 if (reg != 0xff && (reg & R92S_GPIO_WPS)) 1305 RSU_DPRINTF(sc, RSU_DEBUG_CALIB, "WPS PBC is pushed\n"); 1306 #endif 1307 /* Read current signal level. */ 1308 if (rsu_fw_iocmd(sc, 0xf4000001) == 0) { 1309 sc->sc_currssi = rsu_read_4(sc, R92S_IOCMD_DATA); 1310 RSU_DPRINTF(sc, RSU_DEBUG_CALIB, "%s: RSSI=%d (%d)\n", 1311 __func__, sc->sc_currssi, 1312 rsu_hwrssi_to_rssi(sc, sc->sc_currssi)); 1313 } 1314 if (sc->sc_calibrating) 1315 taskqueue_enqueue_timeout(taskqueue_thread, &sc->calib_task, hz); 1316 RSU_UNLOCK(sc); 1317 } 1318 1319 static void 1320 rsu_tx_task(void *arg, int pending __unused) 1321 { 1322 struct rsu_softc *sc = arg; 1323 1324 RSU_LOCK(sc); 1325 _rsu_start(sc); 1326 RSU_UNLOCK(sc); 1327 } 1328 1329 #define RSU_PWR_UNKNOWN 0x0 1330 #define RSU_PWR_ACTIVE 0x1 1331 #define RSU_PWR_OFF 0x2 1332 #define RSU_PWR_SLEEP 0x3 1333 1334 /* 1335 * Set the current power state. 1336 * 1337 * The rtlwifi code doesn't do this so aggressively; it 1338 * waits for an idle period after association with 1339 * no traffic before doing this. 1340 * 1341 * For now - it's on in all states except RUN, and 1342 * in RUN it'll transition to allow sleep. 1343 */ 1344 1345 struct r92s_pwr_cmd { 1346 uint8_t mode; 1347 uint8_t smart_ps; 1348 uint8_t bcn_pass_time; 1349 }; 1350 1351 static int 1352 rsu_set_fw_power_state(struct rsu_softc *sc, int state) 1353 { 1354 struct r92s_set_pwr_mode cmd; 1355 //struct r92s_pwr_cmd cmd; 1356 int error; 1357 1358 RSU_ASSERT_LOCKED(sc); 1359 1360 /* only change state if required */ 1361 if (sc->sc_curpwrstate == state) 1362 return (0); 1363 1364 memset(&cmd, 0, sizeof(cmd)); 1365 1366 switch (state) { 1367 case RSU_PWR_ACTIVE: 1368 /* Force the hardware awake */ 1369 rsu_write_1(sc, R92S_USB_HRPWM, 1370 R92S_USB_HRPWM_PS_ST_ACTIVE | R92S_USB_HRPWM_PS_ALL_ON); 1371 cmd.mode = R92S_PS_MODE_ACTIVE; 1372 break; 1373 case RSU_PWR_SLEEP: 1374 cmd.mode = R92S_PS_MODE_DTIM; /* XXX configurable? */ 1375 cmd.smart_ps = 1; /* XXX 2 if doing p2p */ 1376 cmd.bcn_pass_time = 5; /* in 100mS usb.c, linux/rtlwifi */ 1377 break; 1378 case RSU_PWR_OFF: 1379 cmd.mode = R92S_PS_MODE_RADIOOFF; 1380 break; 1381 default: 1382 device_printf(sc->sc_dev, "%s: unknown ps mode (%d)\n", 1383 __func__, 1384 state); 1385 return (ENXIO); 1386 } 1387 1388 RSU_DPRINTF(sc, RSU_DEBUG_RESET, 1389 "%s: setting ps mode to %d (mode %d)\n", 1390 __func__, state, cmd.mode); 1391 error = rsu_fw_cmd(sc, R92S_CMD_SET_PWR_MODE, &cmd, sizeof(cmd)); 1392 if (error == 0) 1393 sc->sc_curpwrstate = state; 1394 1395 return (error); 1396 } 1397 1398 static void 1399 rsu_set_led(struct rsu_softc *sc, int on) 1400 { 1401 rsu_write_1(sc, R92S_LEDCFG, 1402 (rsu_read_1(sc, R92S_LEDCFG) & 0xf0) | (!on << 3)); 1403 } 1404 1405 static int 1406 rsu_monitor_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, 1407 int arg) 1408 { 1409 struct ieee80211com *ic = vap->iv_ic; 1410 struct rsu_softc *sc = ic->ic_softc; 1411 struct rsu_vap *uvp = RSU_VAP(vap); 1412 1413 if (vap->iv_state != nstate) { 1414 IEEE80211_UNLOCK(ic); 1415 RSU_LOCK(sc); 1416 1417 switch (nstate) { 1418 case IEEE80211_S_INIT: 1419 sc->sc_vap_is_running = 0; 1420 rsu_set_led(sc, 0); 1421 break; 1422 case IEEE80211_S_RUN: 1423 sc->sc_vap_is_running = 1; 1424 rsu_set_led(sc, 1); 1425 break; 1426 default: 1427 /* NOTREACHED */ 1428 break; 1429 } 1430 rsu_rxfilter_refresh(sc); 1431 1432 RSU_UNLOCK(sc); 1433 IEEE80211_LOCK(ic); 1434 } 1435 1436 return (uvp->newstate(vap, nstate, arg)); 1437 } 1438 1439 static int 1440 rsu_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg) 1441 { 1442 struct rsu_vap *uvp = RSU_VAP(vap); 1443 struct ieee80211com *ic = vap->iv_ic; 1444 struct rsu_softc *sc = ic->ic_softc; 1445 struct ieee80211_node *ni; 1446 struct ieee80211_rateset *rs; 1447 enum ieee80211_state ostate; 1448 int error, startcal = 0; 1449 1450 ostate = vap->iv_state; 1451 RSU_DPRINTF(sc, RSU_DEBUG_STATE, "%s: %s -> %s\n", 1452 __func__, 1453 ieee80211_state_name[ostate], 1454 ieee80211_state_name[nstate]); 1455 1456 IEEE80211_UNLOCK(ic); 1457 if (ostate == IEEE80211_S_RUN) { 1458 RSU_LOCK(sc); 1459 /* Stop calibration. */ 1460 sc->sc_calibrating = 0; 1461 1462 /* Pause Tx for AC queues. */ 1463 rsu_write_1(sc, R92S_TXPAUSE, R92S_TXPAUSE_AC); 1464 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(10)); 1465 1466 RSU_UNLOCK(sc); 1467 taskqueue_drain_timeout(taskqueue_thread, &sc->calib_task); 1468 taskqueue_drain(taskqueue_thread, &sc->tx_task); 1469 RSU_LOCK(sc); 1470 /* Disassociate from our current BSS. */ 1471 rsu_disconnect(sc); 1472 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(10)); 1473 1474 /* Refresh Rx filter (may be modified by firmware). */ 1475 sc->sc_vap_is_running = 0; 1476 rsu_rxfilter_refresh(sc); 1477 1478 /* Reinstall static keys. */ 1479 if (sc->sc_running) 1480 rsu_reinit_static_keys(sc); 1481 } else 1482 RSU_LOCK(sc); 1483 switch (nstate) { 1484 case IEEE80211_S_INIT: 1485 (void) rsu_set_fw_power_state(sc, RSU_PWR_ACTIVE); 1486 break; 1487 case IEEE80211_S_AUTH: 1488 ni = ieee80211_ref_node(vap->iv_bss); 1489 (void) rsu_set_fw_power_state(sc, RSU_PWR_ACTIVE); 1490 error = rsu_join_bss(sc, ni); 1491 ieee80211_free_node(ni); 1492 if (error != 0) { 1493 device_printf(sc->sc_dev, 1494 "could not send join command\n"); 1495 } 1496 break; 1497 case IEEE80211_S_RUN: 1498 /* Flush all AC queues. */ 1499 rsu_write_1(sc, R92S_TXPAUSE, 0); 1500 1501 ni = ieee80211_ref_node(vap->iv_bss); 1502 rs = &ni->ni_rates; 1503 /* Indicate highest supported rate. */ 1504 ni->ni_txrate = rs->rs_rates[rs->rs_nrates - 1]; 1505 (void) rsu_set_fw_power_state(sc, RSU_PWR_SLEEP); 1506 ieee80211_free_node(ni); 1507 startcal = 1; 1508 break; 1509 default: 1510 break; 1511 } 1512 if (startcal != 0) { 1513 sc->sc_calibrating = 1; 1514 /* Start periodic calibration. */ 1515 taskqueue_enqueue_timeout(taskqueue_thread, &sc->calib_task, 1516 hz); 1517 } 1518 RSU_UNLOCK(sc); 1519 IEEE80211_LOCK(ic); 1520 return (uvp->newstate(vap, nstate, arg)); 1521 } 1522 1523 static int 1524 rsu_key_alloc(struct ieee80211vap *vap, struct ieee80211_key *k, 1525 ieee80211_keyix *keyix, ieee80211_keyix *rxkeyix) 1526 { 1527 struct rsu_softc *sc = vap->iv_ic->ic_softc; 1528 int is_checked = 0; 1529 1530 if (&vap->iv_nw_keys[0] <= k && 1531 k < &vap->iv_nw_keys[IEEE80211_WEP_NKID]) { 1532 *keyix = ieee80211_crypto_get_key_wepidx(vap, k); 1533 } else { 1534 if (vap->iv_opmode != IEEE80211_M_STA) { 1535 *keyix = 0; 1536 /* TODO: obtain keyix from node id */ 1537 is_checked = 1; 1538 k->wk_flags |= IEEE80211_KEY_SWCRYPT; 1539 } else 1540 *keyix = R92S_MACID_BSS; 1541 } 1542 1543 if (!is_checked) { 1544 RSU_LOCK(sc); 1545 if (isset(sc->keys_bmap, *keyix)) { 1546 device_printf(sc->sc_dev, 1547 "%s: key slot %d is already used!\n", 1548 __func__, *keyix); 1549 RSU_UNLOCK(sc); 1550 return (0); 1551 } 1552 setbit(sc->keys_bmap, *keyix); 1553 RSU_UNLOCK(sc); 1554 } 1555 1556 *rxkeyix = *keyix; 1557 1558 return (1); 1559 } 1560 1561 static int 1562 rsu_process_key(struct ieee80211vap *vap, const struct ieee80211_key *k, 1563 int set) 1564 { 1565 struct rsu_softc *sc = vap->iv_ic->ic_softc; 1566 int ret; 1567 1568 if (k->wk_flags & IEEE80211_KEY_SWCRYPT) { 1569 /* Not for us. */ 1570 return (1); 1571 } 1572 1573 /* Handle group keys. */ 1574 if (&vap->iv_nw_keys[0] <= k && 1575 k < &vap->iv_nw_keys[IEEE80211_WEP_NKID]) { 1576 KASSERT(k->wk_keyix < nitems(sc->group_keys), 1577 ("keyix %u > %zu\n", k->wk_keyix, nitems(sc->group_keys))); 1578 1579 RSU_LOCK(sc); 1580 sc->group_keys[k->wk_keyix] = (set ? k : NULL); 1581 if (!sc->sc_running) { 1582 /* Static keys will be set during device startup. */ 1583 RSU_UNLOCK(sc); 1584 return (1); 1585 } 1586 1587 if (set) 1588 ret = rsu_set_key_group(sc, k); 1589 else 1590 ret = rsu_delete_key(sc, k->wk_keyix); 1591 RSU_UNLOCK(sc); 1592 1593 return (!ret); 1594 } 1595 1596 if (set) { 1597 /* wait for pending key removal */ 1598 taskqueue_drain(taskqueue_thread, &sc->del_key_task); 1599 1600 RSU_LOCK(sc); 1601 ret = rsu_set_key_pair(sc, k); 1602 RSU_UNLOCK(sc); 1603 } else { 1604 RSU_DELKEY_BMAP_LOCK(sc); 1605 setbit(sc->free_keys_bmap, k->wk_keyix); 1606 RSU_DELKEY_BMAP_UNLOCK(sc); 1607 1608 /* workaround ieee80211_node_delucastkey() locking */ 1609 taskqueue_enqueue(taskqueue_thread, &sc->del_key_task); 1610 ret = 0; /* fake success */ 1611 } 1612 1613 return (!ret); 1614 } 1615 1616 static int 1617 rsu_key_set(struct ieee80211vap *vap, const struct ieee80211_key *k) 1618 { 1619 return (rsu_process_key(vap, k, 1)); 1620 } 1621 1622 static int 1623 rsu_key_delete(struct ieee80211vap *vap, const struct ieee80211_key *k) 1624 { 1625 return (rsu_process_key(vap, k, 0)); 1626 } 1627 1628 static int 1629 rsu_cam_read(struct rsu_softc *sc, uint8_t addr, uint32_t *val) 1630 { 1631 int ntries; 1632 1633 rsu_write_4(sc, R92S_CAMCMD, 1634 R92S_CAMCMD_POLLING | SM(R92S_CAMCMD_ADDR, addr)); 1635 for (ntries = 0; ntries < 10; ntries++) { 1636 if (!(rsu_read_4(sc, R92S_CAMCMD) & R92S_CAMCMD_POLLING)) 1637 break; 1638 1639 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(1)); 1640 } 1641 if (ntries == 10) { 1642 device_printf(sc->sc_dev, 1643 "%s: cannot read CAM entry at address %02X\n", 1644 __func__, addr); 1645 return (ETIMEDOUT); 1646 } 1647 1648 *val = rsu_read_4(sc, R92S_CAMREAD); 1649 1650 return (0); 1651 } 1652 1653 static void 1654 rsu_cam_write(struct rsu_softc *sc, uint8_t addr, uint32_t data) 1655 { 1656 1657 rsu_write_4(sc, R92S_CAMWRITE, data); 1658 rsu_write_4(sc, R92S_CAMCMD, 1659 R92S_CAMCMD_POLLING | R92S_CAMCMD_WRITE | 1660 SM(R92S_CAMCMD_ADDR, addr)); 1661 } 1662 1663 static int 1664 rsu_key_check(struct rsu_softc *sc, ieee80211_keyix keyix, int is_valid) 1665 { 1666 uint32_t val; 1667 int error, ntries; 1668 1669 for (ntries = 0; ntries < 20; ntries++) { 1670 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(1)); 1671 1672 error = rsu_cam_read(sc, R92S_CAM_CTL0(keyix), &val); 1673 if (error != 0) { 1674 device_printf(sc->sc_dev, 1675 "%s: cannot check key status!\n", __func__); 1676 return (error); 1677 } 1678 if (((val & R92S_CAM_VALID) == 0) ^ is_valid) 1679 break; 1680 } 1681 if (ntries == 20) { 1682 device_printf(sc->sc_dev, 1683 "%s: key %d is %s marked as valid, rejecting request\n", 1684 __func__, keyix, is_valid ? "not" : "still"); 1685 return (EIO); 1686 } 1687 1688 return (0); 1689 } 1690 1691 /* 1692 * Map net80211 cipher to RTL8712 security mode. 1693 */ 1694 static uint8_t 1695 rsu_crypto_mode(struct rsu_softc *sc, u_int cipher, int keylen) 1696 { 1697 switch (cipher) { 1698 case IEEE80211_CIPHER_WEP: 1699 return keylen < 8 ? R92S_KEY_ALGO_WEP40 : R92S_KEY_ALGO_WEP104; 1700 case IEEE80211_CIPHER_TKIP: 1701 return R92S_KEY_ALGO_TKIP; 1702 case IEEE80211_CIPHER_AES_CCM: 1703 return R92S_KEY_ALGO_AES; 1704 default: 1705 device_printf(sc->sc_dev, "unknown cipher %d\n", cipher); 1706 return R92S_KEY_ALGO_INVALID; 1707 } 1708 } 1709 1710 static int 1711 rsu_set_key_group(struct rsu_softc *sc, const struct ieee80211_key *k) 1712 { 1713 struct r92s_fw_cmd_set_key key; 1714 uint8_t algo; 1715 int error; 1716 1717 RSU_ASSERT_LOCKED(sc); 1718 1719 /* Map net80211 cipher to HW crypto algorithm. */ 1720 algo = rsu_crypto_mode(sc, k->wk_cipher->ic_cipher, k->wk_keylen); 1721 if (algo == R92S_KEY_ALGO_INVALID) 1722 return (EINVAL); 1723 1724 memset(&key, 0, sizeof(key)); 1725 key.algo = algo; 1726 key.cam_id = k->wk_keyix; 1727 key.grpkey = (k->wk_flags & IEEE80211_KEY_GROUP) != 0; 1728 memcpy(key.key, k->wk_key, MIN(k->wk_keylen, sizeof(key.key))); 1729 1730 RSU_DPRINTF(sc, RSU_DEBUG_KEY | RSU_DEBUG_FWCMD, 1731 "%s: keyix %u, group %u, algo %u/%u, flags %04X, len %u, " 1732 "macaddr %s\n", __func__, key.cam_id, key.grpkey, 1733 k->wk_cipher->ic_cipher, key.algo, k->wk_flags, k->wk_keylen, 1734 ether_sprintf(k->wk_macaddr)); 1735 1736 error = rsu_fw_cmd(sc, R92S_CMD_SET_KEY, &key, sizeof(key)); 1737 if (error != 0) { 1738 device_printf(sc->sc_dev, 1739 "%s: cannot send firmware command, error %d\n", 1740 __func__, error); 1741 return (error); 1742 } 1743 1744 return (rsu_key_check(sc, k->wk_keyix, 1)); 1745 } 1746 1747 static int 1748 rsu_set_key_pair(struct rsu_softc *sc, const struct ieee80211_key *k) 1749 { 1750 struct r92s_fw_cmd_set_key_mac key; 1751 uint8_t algo; 1752 int error; 1753 1754 RSU_ASSERT_LOCKED(sc); 1755 1756 if (!sc->sc_running) 1757 return (ESHUTDOWN); 1758 1759 /* Map net80211 cipher to HW crypto algorithm. */ 1760 algo = rsu_crypto_mode(sc, k->wk_cipher->ic_cipher, k->wk_keylen); 1761 if (algo == R92S_KEY_ALGO_INVALID) 1762 return (EINVAL); 1763 1764 memset(&key, 0, sizeof(key)); 1765 key.algo = algo; 1766 memcpy(key.macaddr, k->wk_macaddr, sizeof(key.macaddr)); 1767 memcpy(key.key, k->wk_key, MIN(k->wk_keylen, sizeof(key.key))); 1768 1769 RSU_DPRINTF(sc, RSU_DEBUG_KEY | RSU_DEBUG_FWCMD, 1770 "%s: keyix %u, algo %u/%u, flags %04X, len %u, macaddr %s\n", 1771 __func__, k->wk_keyix, k->wk_cipher->ic_cipher, key.algo, 1772 k->wk_flags, k->wk_keylen, ether_sprintf(key.macaddr)); 1773 1774 error = rsu_fw_cmd(sc, R92S_CMD_SET_STA_KEY, &key, sizeof(key)); 1775 if (error != 0) { 1776 device_printf(sc->sc_dev, 1777 "%s: cannot send firmware command, error %d\n", 1778 __func__, error); 1779 return (error); 1780 } 1781 1782 return (rsu_key_check(sc, k->wk_keyix, 1)); 1783 } 1784 1785 static int 1786 rsu_reinit_static_keys(struct rsu_softc *sc) 1787 { 1788 int i, error; 1789 1790 for (i = 0; i < nitems(sc->group_keys); i++) { 1791 if (sc->group_keys[i] != NULL) { 1792 error = rsu_set_key_group(sc, sc->group_keys[i]); 1793 if (error != 0) { 1794 device_printf(sc->sc_dev, 1795 "%s: failed to set static key %d, " 1796 "error %d\n", __func__, i, error); 1797 return (error); 1798 } 1799 } 1800 } 1801 1802 return (0); 1803 } 1804 1805 static int 1806 rsu_delete_key(struct rsu_softc *sc, ieee80211_keyix keyix) 1807 { 1808 struct r92s_fw_cmd_set_key key; 1809 uint32_t val; 1810 int error; 1811 1812 RSU_ASSERT_LOCKED(sc); 1813 1814 if (!sc->sc_running) 1815 return (0); 1816 1817 /* check if it was automatically removed by firmware */ 1818 error = rsu_cam_read(sc, R92S_CAM_CTL0(keyix), &val); 1819 if (error == 0 && (val & R92S_CAM_VALID) == 0) { 1820 RSU_DPRINTF(sc, RSU_DEBUG_KEY, 1821 "%s: key %u does not exist\n", __func__, keyix); 1822 clrbit(sc->keys_bmap, keyix); 1823 return (0); 1824 } 1825 1826 memset(&key, 0, sizeof(key)); 1827 key.cam_id = keyix; 1828 1829 RSU_DPRINTF(sc, RSU_DEBUG_KEY | RSU_DEBUG_FWCMD, 1830 "%s: removing key %u\n", __func__, key.cam_id); 1831 1832 error = rsu_fw_cmd(sc, R92S_CMD_SET_KEY, &key, sizeof(key)); 1833 if (error != 0) { 1834 device_printf(sc->sc_dev, 1835 "%s: cannot send firmware command, error %d\n", 1836 __func__, error); 1837 goto finish; 1838 } 1839 1840 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(5)); 1841 1842 /* 1843 * Clear 'valid' bit manually (cannot be done via firmware command). 1844 * Used for key check + when firmware command cannot be sent. 1845 */ 1846 finish: 1847 rsu_cam_write(sc, R92S_CAM_CTL0(keyix), 0); 1848 1849 clrbit(sc->keys_bmap, keyix); 1850 1851 return (rsu_key_check(sc, keyix, 0)); 1852 } 1853 1854 static void 1855 rsu_delete_key_pair_cb(void *arg, int pending __unused) 1856 { 1857 struct rsu_softc *sc = arg; 1858 int i; 1859 1860 RSU_DELKEY_BMAP_LOCK(sc); 1861 for (i = IEEE80211_WEP_NKID; i < R92S_CAM_ENTRY_LIMIT; i++) { 1862 if (isset(sc->free_keys_bmap, i)) { 1863 RSU_DELKEY_BMAP_UNLOCK(sc); 1864 1865 RSU_LOCK(sc); 1866 RSU_DPRINTF(sc, RSU_DEBUG_KEY, 1867 "%s: calling rsu_delete_key() with keyix = %d\n", 1868 __func__, i); 1869 (void) rsu_delete_key(sc, i); 1870 RSU_UNLOCK(sc); 1871 1872 RSU_DELKEY_BMAP_LOCK(sc); 1873 clrbit(sc->free_keys_bmap, i); 1874 1875 /* bmap can be changed */ 1876 i = IEEE80211_WEP_NKID - 1; 1877 continue; 1878 } 1879 } 1880 RSU_DELKEY_BMAP_UNLOCK(sc); 1881 } 1882 1883 static int 1884 rsu_site_survey(struct rsu_softc *sc, struct ieee80211_scan_ssid *ssid) 1885 { 1886 struct r92s_fw_cmd_sitesurvey cmd; 1887 1888 RSU_ASSERT_LOCKED(sc); 1889 1890 memset(&cmd, 0, sizeof(cmd)); 1891 /* TODO: passive channels? */ 1892 if (sc->sc_active_scan) 1893 cmd.active = htole32(1); 1894 cmd.limit = htole32(48); 1895 1896 if (ssid != NULL) { 1897 sc->sc_extra_scan = 1; 1898 cmd.ssidlen = htole32(ssid->len); 1899 memcpy(cmd.ssid, ssid->ssid, ssid->len); 1900 } 1901 #ifdef USB_DEBUG 1902 if (rsu_debug & (RSU_DEBUG_SCAN | RSU_DEBUG_FWCMD)) { 1903 device_printf(sc->sc_dev, 1904 "sending site survey command, active %d", 1905 le32toh(cmd.active)); 1906 if (ssid != NULL) { 1907 printf(", ssid: "); 1908 ieee80211_print_essid(cmd.ssid, le32toh(cmd.ssidlen)); 1909 } 1910 printf("\n"); 1911 } 1912 #endif 1913 return (rsu_fw_cmd(sc, R92S_CMD_SITE_SURVEY, &cmd, sizeof(cmd))); 1914 } 1915 1916 static int 1917 rsu_join_bss(struct rsu_softc *sc, struct ieee80211_node *ni) 1918 { 1919 struct ieee80211com *ic = &sc->sc_ic; 1920 struct ieee80211vap *vap = ni->ni_vap; 1921 struct ndis_wlan_bssid_ex *bss; 1922 struct ndis_802_11_fixed_ies *fixed; 1923 struct r92s_fw_cmd_auth auth; 1924 uint8_t buf[sizeof(*bss) + 128] __aligned(4); 1925 uint8_t *frm; 1926 uint8_t opmode; 1927 int error; 1928 1929 RSU_ASSERT_LOCKED(sc); 1930 1931 /* Let the FW decide the opmode based on the capinfo field. */ 1932 opmode = NDIS802_11AUTOUNKNOWN; 1933 RSU_DPRINTF(sc, RSU_DEBUG_RESET, 1934 "%s: setting operating mode to %d\n", 1935 __func__, opmode); 1936 error = rsu_fw_cmd(sc, R92S_CMD_SET_OPMODE, &opmode, sizeof(opmode)); 1937 if (error != 0) 1938 return (error); 1939 1940 memset(&auth, 0, sizeof(auth)); 1941 if (vap->iv_flags & IEEE80211_F_WPA) { 1942 auth.mode = R92S_AUTHMODE_WPA; 1943 auth.dot1x = (ni->ni_authmode == IEEE80211_AUTH_8021X); 1944 } else 1945 auth.mode = R92S_AUTHMODE_OPEN; 1946 RSU_DPRINTF(sc, RSU_DEBUG_RESET, 1947 "%s: setting auth mode to %d\n", 1948 __func__, auth.mode); 1949 error = rsu_fw_cmd(sc, R92S_CMD_SET_AUTH, &auth, sizeof(auth)); 1950 if (error != 0) 1951 return (error); 1952 1953 memset(buf, 0, sizeof(buf)); 1954 bss = (struct ndis_wlan_bssid_ex *)buf; 1955 IEEE80211_ADDR_COPY(bss->macaddr, ni->ni_bssid); 1956 bss->ssid.ssidlen = htole32(ni->ni_esslen); 1957 memcpy(bss->ssid.ssid, ni->ni_essid, ni->ni_esslen); 1958 if (vap->iv_flags & (IEEE80211_F_PRIVACY | IEEE80211_F_WPA)) 1959 bss->privacy = htole32(1); 1960 bss->rssi = htole32(ni->ni_avgrssi); 1961 if (ic->ic_curmode == IEEE80211_MODE_11B) 1962 bss->networktype = htole32(NDIS802_11DS); 1963 else 1964 bss->networktype = htole32(NDIS802_11OFDM24); 1965 bss->config.len = htole32(sizeof(bss->config)); 1966 bss->config.bintval = htole32(ni->ni_intval); 1967 bss->config.dsconfig = htole32(ieee80211_chan2ieee(ic, ni->ni_chan)); 1968 bss->inframode = htole32(NDIS802_11INFRASTRUCTURE); 1969 /* XXX verify how this is supposed to look! */ 1970 memcpy(bss->supprates, ni->ni_rates.rs_rates, 1971 ni->ni_rates.rs_nrates); 1972 /* Write the fixed fields of the beacon frame. */ 1973 fixed = (struct ndis_802_11_fixed_ies *)&bss[1]; 1974 memcpy(&fixed->tstamp, ni->ni_tstamp.data, 8); 1975 fixed->bintval = htole16(ni->ni_intval); 1976 fixed->capabilities = htole16(ni->ni_capinfo); 1977 /* Write IEs to be included in the association request. */ 1978 frm = (uint8_t *)&fixed[1]; 1979 frm = ieee80211_add_rsn(frm, vap); 1980 frm = ieee80211_add_wpa(frm, vap); 1981 frm = ieee80211_add_qos(frm, ni); 1982 if ((ic->ic_flags & IEEE80211_F_WME) && 1983 (ni->ni_ies.wme_ie != NULL)) 1984 frm = ieee80211_add_wme_info(frm, &ic->ic_wme, ni); 1985 if (ni->ni_flags & IEEE80211_NODE_HT) { 1986 frm = ieee80211_add_htcap(frm, ni); 1987 frm = ieee80211_add_htinfo(frm, ni); 1988 } 1989 bss->ieslen = htole32(frm - (uint8_t *)fixed); 1990 bss->len = htole32(((frm - buf) + 3) & ~3); 1991 RSU_DPRINTF(sc, RSU_DEBUG_RESET | RSU_DEBUG_FWCMD, 1992 "%s: sending join bss command to %s chan %d\n", 1993 __func__, 1994 ether_sprintf(bss->macaddr), le32toh(bss->config.dsconfig)); 1995 return (rsu_fw_cmd(sc, R92S_CMD_JOIN_BSS, buf, sizeof(buf))); 1996 } 1997 1998 static int 1999 rsu_disconnect(struct rsu_softc *sc) 2000 { 2001 uint32_t zero = 0; /* :-) */ 2002 2003 /* Disassociate from our current BSS. */ 2004 RSU_DPRINTF(sc, RSU_DEBUG_STATE | RSU_DEBUG_FWCMD, 2005 "%s: sending disconnect command\n", __func__); 2006 return (rsu_fw_cmd(sc, R92S_CMD_DISCONNECT, &zero, sizeof(zero))); 2007 } 2008 2009 /* 2010 * Map the hardware provided RSSI value to a signal level. 2011 * For the most part it's just something we divide by and cap 2012 * so it doesn't overflow the representation by net80211. 2013 */ 2014 static int 2015 rsu_hwrssi_to_rssi(struct rsu_softc *sc, int hw_rssi) 2016 { 2017 int v; 2018 2019 if (hw_rssi == 0) 2020 return (0); 2021 v = hw_rssi >> 4; 2022 if (v > 80) 2023 v = 80; 2024 return (v); 2025 } 2026 2027 CTASSERT(MCLBYTES > sizeof(struct ieee80211_frame)); 2028 2029 static void 2030 rsu_event_survey(struct rsu_softc *sc, uint8_t *buf, int len) 2031 { 2032 struct ieee80211com *ic = &sc->sc_ic; 2033 struct ieee80211_frame *wh; 2034 struct ndis_wlan_bssid_ex *bss; 2035 struct ieee80211_rx_stats rxs; 2036 struct mbuf *m; 2037 uint32_t ieslen; 2038 uint32_t pktlen; 2039 2040 if (__predict_false(len < sizeof(*bss))) 2041 return; 2042 bss = (struct ndis_wlan_bssid_ex *)buf; 2043 ieslen = le32toh(bss->ieslen); 2044 /* range check length of information element */ 2045 if (__predict_false(ieslen > (uint32_t)(len - sizeof(*bss)))) 2046 return; 2047 2048 RSU_DPRINTF(sc, RSU_DEBUG_SCAN, 2049 "%s: found BSS %s: len=%d chan=%d inframode=%d " 2050 "networktype=%d privacy=%d, RSSI=%d\n", 2051 __func__, 2052 ether_sprintf(bss->macaddr), ieslen, 2053 le32toh(bss->config.dsconfig), le32toh(bss->inframode), 2054 le32toh(bss->networktype), le32toh(bss->privacy), 2055 le32toh(bss->rssi)); 2056 2057 /* Build a fake beacon frame to let net80211 do all the parsing. */ 2058 /* XXX TODO: just call the new scan API methods! */ 2059 if (__predict_false(ieslen > (size_t)(MCLBYTES - sizeof(*wh)))) 2060 return; 2061 pktlen = sizeof(*wh) + ieslen; 2062 m = m_get2(pktlen, M_NOWAIT, MT_DATA, M_PKTHDR); 2063 if (__predict_false(m == NULL)) 2064 return; 2065 wh = mtod(m, struct ieee80211_frame *); 2066 wh->i_fc[0] = IEEE80211_FC0_VERSION_0 | IEEE80211_FC0_TYPE_MGT | 2067 IEEE80211_FC0_SUBTYPE_BEACON; 2068 wh->i_fc[1] = IEEE80211_FC1_DIR_NODS; 2069 USETW(wh->i_dur, 0); 2070 IEEE80211_ADDR_COPY(wh->i_addr1, ieee80211broadcastaddr); 2071 IEEE80211_ADDR_COPY(wh->i_addr2, bss->macaddr); 2072 IEEE80211_ADDR_COPY(wh->i_addr3, bss->macaddr); 2073 *(uint16_t *)wh->i_seq = 0; 2074 memcpy(&wh[1], (uint8_t *)&bss[1], ieslen); 2075 2076 /* Finalize mbuf. */ 2077 m->m_pkthdr.len = m->m_len = pktlen; 2078 2079 /* Set channel flags for input path */ 2080 bzero(&rxs, sizeof(rxs)); 2081 rxs.r_flags |= IEEE80211_R_IEEE | IEEE80211_R_FREQ; 2082 rxs.r_flags |= IEEE80211_R_BAND; 2083 rxs.r_flags |= IEEE80211_R_NF | IEEE80211_R_RSSI; 2084 rxs.c_ieee = le32toh(bss->config.dsconfig); 2085 rxs.c_freq = ieee80211_ieee2mhz(rxs.c_ieee, IEEE80211_CHAN_2GHZ); 2086 rxs.c_band = IEEE80211_CHAN_2GHZ; 2087 /* This is a number from 0..100; so let's just divide it down a bit */ 2088 rxs.c_rssi = le32toh(bss->rssi) / 2; 2089 rxs.c_nf = -96; 2090 if (ieee80211_add_rx_params(m, &rxs) == 0) 2091 return; 2092 2093 /* XXX avoid a LOR */ 2094 RSU_UNLOCK(sc); 2095 ieee80211_input_mimo_all(ic, m); 2096 RSU_LOCK(sc); 2097 } 2098 2099 static void 2100 rsu_event_join_bss(struct rsu_softc *sc, uint8_t *buf, int len) 2101 { 2102 struct ieee80211com *ic = &sc->sc_ic; 2103 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2104 struct ieee80211_node *ni = vap->iv_bss; 2105 struct r92s_event_join_bss *rsp; 2106 uint32_t tmp; 2107 int res; 2108 2109 if (__predict_false(len < sizeof(*rsp))) 2110 return; 2111 rsp = (struct r92s_event_join_bss *)buf; 2112 res = (int)le32toh(rsp->join_res); 2113 2114 RSU_DPRINTF(sc, RSU_DEBUG_STATE | RSU_DEBUG_FWCMD, 2115 "%s: Rx join BSS event len=%d res=%d\n", 2116 __func__, len, res); 2117 2118 /* 2119 * XXX Don't do this; there's likely a better way to tell 2120 * the caller we failed. 2121 */ 2122 if (res <= 0) { 2123 RSU_UNLOCK(sc); 2124 ieee80211_new_state(vap, IEEE80211_S_SCAN, -1); 2125 RSU_LOCK(sc); 2126 return; 2127 } 2128 2129 tmp = le32toh(rsp->associd); 2130 if (tmp >= vap->iv_max_aid) { 2131 RSU_DPRINTF(sc, RSU_DEBUG_ANY, "Assoc ID overflow\n"); 2132 tmp = 1; 2133 } 2134 RSU_DPRINTF(sc, RSU_DEBUG_STATE | RSU_DEBUG_FWCMD, 2135 "%s: associated with %s associd=%d\n", 2136 __func__, ether_sprintf(rsp->bss.macaddr), tmp); 2137 /* XXX is this required? What's the top two bits for again? */ 2138 ni->ni_associd = tmp | 0xc000; 2139 2140 /* Refresh Rx filter (was changed by firmware). */ 2141 sc->sc_vap_is_running = 1; 2142 rsu_rxfilter_refresh(sc); 2143 2144 RSU_UNLOCK(sc); 2145 ieee80211_new_state(vap, IEEE80211_S_RUN, 2146 IEEE80211_FC0_SUBTYPE_ASSOC_RESP); 2147 RSU_LOCK(sc); 2148 } 2149 2150 static void 2151 rsu_event_addba_req_report(struct rsu_softc *sc, uint8_t *buf, int len) 2152 { 2153 struct ieee80211com *ic = &sc->sc_ic; 2154 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2155 struct r92s_add_ba_event *ba = (void *) buf; 2156 struct ieee80211_node *ni; 2157 2158 if (len < sizeof(*ba)) { 2159 device_printf(sc->sc_dev, "%s: short read (%d)\n", __func__, len); 2160 return; 2161 } 2162 2163 if (vap == NULL) 2164 return; 2165 2166 RSU_DPRINTF(sc, RSU_DEBUG_AMPDU, "%s: mac=%s, tid=%d, ssn=%d\n", 2167 __func__, 2168 ether_sprintf(ba->mac_addr), 2169 (int) ba->tid, 2170 (int) le16toh(ba->ssn)); 2171 2172 /* XXX do node lookup; this is STA specific */ 2173 2174 ni = ieee80211_ref_node(vap->iv_bss); 2175 ieee80211_ampdu_rx_start_ext(ni, ba->tid, le16toh(ba->ssn) >> 4, 32); 2176 ieee80211_free_node(ni); 2177 } 2178 2179 static void 2180 rsu_rx_event(struct rsu_softc *sc, uint8_t code, uint8_t *buf, int len) 2181 { 2182 struct ieee80211com *ic = &sc->sc_ic; 2183 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 2184 2185 RSU_DPRINTF(sc, RSU_DEBUG_RX | RSU_DEBUG_FWCMD, 2186 "%s: Rx event code=%d len=%d\n", __func__, code, len); 2187 switch (code) { 2188 case R92S_EVT_SURVEY: 2189 rsu_event_survey(sc, buf, len); 2190 break; 2191 case R92S_EVT_SURVEY_DONE: 2192 RSU_DPRINTF(sc, RSU_DEBUG_SCAN, 2193 "%s: %s scan done, found %d BSS\n", 2194 __func__, sc->sc_extra_scan ? "direct" : "broadcast", 2195 le32toh(*(uint32_t *)buf)); 2196 if (sc->sc_extra_scan == 1) { 2197 /* Send broadcast probe request. */ 2198 sc->sc_extra_scan = 0; 2199 if (vap != NULL && rsu_site_survey(sc, NULL) != 0) { 2200 RSU_UNLOCK(sc); 2201 ieee80211_cancel_scan(vap); 2202 RSU_LOCK(sc); 2203 } 2204 break; 2205 } 2206 if (vap != NULL) { 2207 RSU_UNLOCK(sc); 2208 ieee80211_scan_done(vap); 2209 RSU_LOCK(sc); 2210 } 2211 break; 2212 case R92S_EVT_JOIN_BSS: 2213 if (vap->iv_state == IEEE80211_S_AUTH) 2214 rsu_event_join_bss(sc, buf, len); 2215 break; 2216 case R92S_EVT_DEL_STA: 2217 RSU_DPRINTF(sc, RSU_DEBUG_FWCMD | RSU_DEBUG_STATE, 2218 "%s: disassociated from %s\n", __func__, 2219 ether_sprintf(buf)); 2220 if (vap->iv_state == IEEE80211_S_RUN && 2221 IEEE80211_ADDR_EQ(vap->iv_bss->ni_bssid, buf)) { 2222 RSU_UNLOCK(sc); 2223 ieee80211_new_state(vap, IEEE80211_S_SCAN, -1); 2224 RSU_LOCK(sc); 2225 } 2226 break; 2227 case R92S_EVT_WPS_PBC: 2228 RSU_DPRINTF(sc, RSU_DEBUG_RX | RSU_DEBUG_FWCMD, 2229 "%s: WPS PBC pushed.\n", __func__); 2230 break; 2231 case R92S_EVT_FWDBG: 2232 buf[60] = '\0'; 2233 RSU_DPRINTF(sc, RSU_DEBUG_FWDBG, "FWDBG: %s\n", (char *)buf); 2234 break; 2235 case R92S_EVT_ADDBA_REQ_REPORT: 2236 rsu_event_addba_req_report(sc, buf, len); 2237 break; 2238 default: 2239 device_printf(sc->sc_dev, "%s: unhandled code (%d)\n", __func__, code); 2240 break; 2241 } 2242 } 2243 2244 static void 2245 rsu_rx_multi_event(struct rsu_softc *sc, uint8_t *buf, int len) 2246 { 2247 struct r92s_fw_cmd_hdr *cmd; 2248 int cmdsz; 2249 2250 RSU_DPRINTF(sc, RSU_DEBUG_RX, "%s: Rx events len=%d\n", __func__, len); 2251 2252 /* Skip Rx status. */ 2253 buf += sizeof(struct r92s_rx_stat); 2254 len -= sizeof(struct r92s_rx_stat); 2255 2256 /* Process all events. */ 2257 for (;;) { 2258 /* Check that command header fits. */ 2259 if (__predict_false(len < sizeof(*cmd))) 2260 break; 2261 cmd = (struct r92s_fw_cmd_hdr *)buf; 2262 /* Check that command payload fits. */ 2263 cmdsz = le16toh(cmd->len); 2264 if (__predict_false(len < sizeof(*cmd) + cmdsz)) 2265 break; 2266 2267 /* Process firmware event. */ 2268 rsu_rx_event(sc, cmd->code, (uint8_t *)&cmd[1], cmdsz); 2269 2270 if (!(cmd->seq & R92S_FW_CMD_MORE)) 2271 break; 2272 buf += sizeof(*cmd) + cmdsz; 2273 len -= sizeof(*cmd) + cmdsz; 2274 } 2275 } 2276 2277 static int8_t 2278 rsu_get_rssi(struct rsu_softc *sc, int rate, void *physt) 2279 { 2280 static const int8_t cckoff[] = { 14, -2, -20, -40 }; 2281 struct r92s_rx_phystat *phy; 2282 struct r92s_rx_cck *cck; 2283 uint8_t rpt; 2284 int8_t rssi; 2285 2286 if (rate <= 3) { 2287 cck = (struct r92s_rx_cck *)physt; 2288 rpt = (cck->agc_rpt >> 6) & 0x3; 2289 rssi = cck->agc_rpt & 0x3e; 2290 rssi = cckoff[rpt] - rssi; 2291 } else { /* OFDM/HT. */ 2292 phy = (struct r92s_rx_phystat *)physt; 2293 rssi = ((le32toh(phy->phydw1) >> 1) & 0x7f) - 106; 2294 } 2295 return (rssi); 2296 } 2297 2298 static struct mbuf * 2299 rsu_rx_copy_to_mbuf(struct rsu_softc *sc, struct r92s_rx_stat *stat, 2300 int totlen) 2301 { 2302 struct ieee80211com *ic = &sc->sc_ic; 2303 struct mbuf *m; 2304 uint32_t rxdw0; 2305 int pktlen; 2306 2307 rxdw0 = le32toh(stat->rxdw0); 2308 if (__predict_false(rxdw0 & (R92S_RXDW0_CRCERR | R92S_RXDW0_ICVERR))) { 2309 RSU_DPRINTF(sc, RSU_DEBUG_RX, 2310 "%s: RX flags error (%s)\n", __func__, 2311 rxdw0 & R92S_RXDW0_CRCERR ? "CRC" : "ICV"); 2312 goto fail; 2313 } 2314 2315 pktlen = MS(rxdw0, R92S_RXDW0_PKTLEN); 2316 if (__predict_false(pktlen < sizeof (struct ieee80211_frame_ack))) { 2317 RSU_DPRINTF(sc, RSU_DEBUG_RX, 2318 "%s: frame is too short: %d\n", __func__, pktlen); 2319 goto fail; 2320 } 2321 2322 m = m_get2(totlen, M_NOWAIT, MT_DATA, M_PKTHDR); 2323 if (__predict_false(m == NULL)) { 2324 device_printf(sc->sc_dev, 2325 "%s: could not allocate RX mbuf, totlen %d\n", 2326 __func__, totlen); 2327 goto fail; 2328 } 2329 2330 /* Finalize mbuf. */ 2331 memcpy(mtod(m, uint8_t *), (uint8_t *)stat, totlen); 2332 m->m_pkthdr.len = m->m_len = totlen; 2333 2334 return (m); 2335 fail: 2336 counter_u64_add(ic->ic_ierrors, 1); 2337 return (NULL); 2338 } 2339 2340 static uint32_t 2341 rsu_get_tsf_low(struct rsu_softc *sc) 2342 { 2343 return (rsu_read_4(sc, R92S_TSFTR)); 2344 } 2345 2346 static uint32_t 2347 rsu_get_tsf_high(struct rsu_softc *sc) 2348 { 2349 return (rsu_read_4(sc, R92S_TSFTR + 4)); 2350 } 2351 2352 static struct ieee80211_node * 2353 rsu_rx_frame(struct rsu_softc *sc, struct mbuf *m) 2354 { 2355 struct ieee80211com *ic = &sc->sc_ic; 2356 struct ieee80211_frame_min *wh; 2357 struct ieee80211_rx_stats rxs; 2358 struct r92s_rx_stat *stat; 2359 uint32_t rxdw0, rxdw3; 2360 uint8_t cipher, rate; 2361 int infosz; 2362 int rssi; 2363 2364 stat = mtod(m, struct r92s_rx_stat *); 2365 rxdw0 = le32toh(stat->rxdw0); 2366 rxdw3 = le32toh(stat->rxdw3); 2367 2368 rate = MS(rxdw3, R92S_RXDW3_RATE); 2369 cipher = MS(rxdw0, R92S_RXDW0_CIPHER); 2370 infosz = MS(rxdw0, R92S_RXDW0_INFOSZ) * 8; 2371 2372 /* Get RSSI from PHY status descriptor if present. */ 2373 if (infosz != 0 && (rxdw0 & R92S_RXDW0_PHYST)) 2374 rssi = rsu_get_rssi(sc, rate, &stat[1]); 2375 else { 2376 /* Cheat and get the last calibrated RSSI */ 2377 rssi = rsu_hwrssi_to_rssi(sc, sc->sc_currssi); 2378 } 2379 2380 /* Hardware does Rx TCP checksum offload. */ 2381 /* 2382 * This flag can be set for some other 2383 * (e.g., EAPOL) frame types, so don't rely on it. 2384 */ 2385 if (rxdw3 & R92S_RXDW3_TCPCHKVALID) { 2386 RSU_DPRINTF(sc, RSU_DEBUG_RX, 2387 "%s: TCP/IP checksums: %schecked / %schecked\n", 2388 __func__, 2389 (rxdw3 & R92S_RXDW3_TCPCHKRPT) ? "" : "not ", 2390 (rxdw3 & R92S_RXDW3_IPCHKRPT) ? "" : "not "); 2391 2392 /* 2393 * 'IP header checksum valid' bit will not be set if 2394 * the frame was not checked / has incorrect checksum / 2395 * does not have checksum (IPv6). 2396 * 2397 * NB: if DF bit is not set then frame will not be checked. 2398 */ 2399 if (rxdw3 & R92S_RXDW3_IPCHKRPT) { 2400 m->m_pkthdr.csum_flags = CSUM_IP_CHECKED; 2401 m->m_pkthdr.csum_flags |= CSUM_IP_VALID; 2402 } 2403 2404 /* 2405 * This is independent of the above check. 2406 */ 2407 if (rxdw3 & R92S_RXDW3_TCPCHKRPT) { 2408 m->m_pkthdr.csum_flags |= CSUM_DATA_VALID; 2409 m->m_pkthdr.csum_flags |= CSUM_PSEUDO_HDR; 2410 m->m_pkthdr.csum_data = 0xffff; 2411 } 2412 } 2413 2414 /* RX flags */ 2415 2416 /* Set channel flags for input path */ 2417 bzero(&rxs, sizeof(rxs)); 2418 2419 /* normal RSSI */ 2420 rxs.r_flags |= IEEE80211_R_NF | IEEE80211_R_RSSI; 2421 rxs.c_rssi = rssi; 2422 rxs.c_nf = -96; 2423 2424 /* Rate */ 2425 if (rate < 12) { 2426 rxs.c_rate = ridx2rate[rate]; 2427 if (RSU_RATE_IS_CCK(rate)) 2428 rxs.c_pktflags |= IEEE80211_RX_F_CCK; 2429 else 2430 rxs.c_pktflags |= IEEE80211_RX_F_OFDM; 2431 } else { 2432 rxs.c_rate = IEEE80211_RATE_MCS | (rate - 12); 2433 rxs.c_pktflags |= IEEE80211_RX_F_HT; 2434 } 2435 2436 if (ieee80211_radiotap_active(ic)) { 2437 struct rsu_rx_radiotap_header *tap = &sc->sc_rxtap; 2438 2439 /* Map HW rate index to 802.11 rate. */ 2440 tap->wr_flags = 0; /* TODO */ 2441 tap->wr_tsft = rsu_get_tsf_high(sc); 2442 if (le32toh(stat->tsf_low) > rsu_get_tsf_low(sc)) 2443 tap->wr_tsft--; 2444 tap->wr_tsft = (uint64_t)htole32(tap->wr_tsft) << 32; 2445 tap->wr_tsft += stat->tsf_low; 2446 2447 tap->wr_rate = rxs.c_rate; 2448 tap->wr_dbm_antsignal = rssi; 2449 }; 2450 2451 (void) ieee80211_add_rx_params(m, &rxs); 2452 2453 /* Drop descriptor. */ 2454 m_adj(m, sizeof(*stat) + infosz); 2455 wh = mtod(m, struct ieee80211_frame_min *); 2456 if ((wh->i_fc[1] & IEEE80211_FC1_PROTECTED) && 2457 cipher != R92S_KEY_ALGO_NONE) { 2458 m->m_flags |= M_WEP; 2459 } 2460 2461 RSU_DPRINTF(sc, RSU_DEBUG_RX, 2462 "%s: Rx frame len %d, rate %d, infosz %d\n", 2463 __func__, m->m_len, rate, infosz); 2464 2465 if (m->m_len >= sizeof(*wh)) 2466 return (ieee80211_find_rxnode(ic, wh)); 2467 2468 return (NULL); 2469 } 2470 2471 static struct mbuf * 2472 rsu_rx_multi_frame(struct rsu_softc *sc, uint8_t *buf, int len) 2473 { 2474 struct r92s_rx_stat *stat; 2475 uint32_t rxdw0; 2476 int totlen, pktlen, infosz, npkts; 2477 struct mbuf *m, *m0 = NULL, *prevm = NULL; 2478 2479 /* 2480 * don't pass packets to the ieee80211 framework if the driver isn't 2481 * RUNNING. 2482 */ 2483 if (!sc->sc_running) 2484 return (NULL); 2485 2486 /* Get the number of encapsulated frames. */ 2487 stat = (struct r92s_rx_stat *)buf; 2488 npkts = MS(le32toh(stat->rxdw2), R92S_RXDW2_PKTCNT); 2489 RSU_DPRINTF(sc, RSU_DEBUG_RX, 2490 "%s: Rx %d frames in one chunk\n", __func__, npkts); 2491 2492 /* Process all of them. */ 2493 while (npkts-- > 0) { 2494 if (__predict_false(len < sizeof(*stat))) 2495 break; 2496 stat = (struct r92s_rx_stat *)buf; 2497 rxdw0 = le32toh(stat->rxdw0); 2498 2499 pktlen = MS(rxdw0, R92S_RXDW0_PKTLEN); 2500 if (__predict_false(pktlen == 0)) 2501 break; 2502 2503 infosz = MS(rxdw0, R92S_RXDW0_INFOSZ) * 8; 2504 2505 /* Make sure everything fits in xfer. */ 2506 totlen = sizeof(*stat) + infosz + pktlen; 2507 if (__predict_false(totlen > len)) 2508 break; 2509 2510 /* Process 802.11 frame. */ 2511 m = rsu_rx_copy_to_mbuf(sc, stat, totlen); 2512 if (m0 == NULL) 2513 m0 = m; 2514 if (prevm == NULL) 2515 prevm = m; 2516 else { 2517 prevm->m_next = m; 2518 prevm = m; 2519 } 2520 /* Next chunk is 128-byte aligned. */ 2521 totlen = (totlen + 127) & ~127; 2522 buf += totlen; 2523 len -= totlen; 2524 } 2525 2526 return (m0); 2527 } 2528 2529 static struct mbuf * 2530 rsu_rxeof(struct usb_xfer *xfer, struct rsu_data *data) 2531 { 2532 struct rsu_softc *sc = data->sc; 2533 struct ieee80211com *ic = &sc->sc_ic; 2534 struct r92s_rx_stat *stat; 2535 int len; 2536 2537 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 2538 2539 if (__predict_false(len < sizeof(*stat))) { 2540 RSU_DPRINTF(sc, RSU_DEBUG_RX, "xfer too short %d\n", len); 2541 counter_u64_add(ic->ic_ierrors, 1); 2542 return (NULL); 2543 } 2544 /* Determine if it is a firmware C2H event or an 802.11 frame. */ 2545 stat = (struct r92s_rx_stat *)data->buf; 2546 if ((le32toh(stat->rxdw1) & 0x1ff) == 0x1ff) { 2547 rsu_rx_multi_event(sc, data->buf, len); 2548 /* No packets to process. */ 2549 return (NULL); 2550 } else 2551 return (rsu_rx_multi_frame(sc, data->buf, len)); 2552 } 2553 2554 static void 2555 rsu_bulk_rx_callback(struct usb_xfer *xfer, usb_error_t error) 2556 { 2557 struct epoch_tracker et; 2558 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2559 struct ieee80211com *ic = &sc->sc_ic; 2560 struct ieee80211_node *ni; 2561 struct mbuf *m = NULL, *next; 2562 struct rsu_data *data; 2563 2564 RSU_ASSERT_LOCKED(sc); 2565 2566 switch (USB_GET_STATE(xfer)) { 2567 case USB_ST_TRANSFERRED: 2568 data = STAILQ_FIRST(&sc->sc_rx_active); 2569 if (data == NULL) 2570 goto tr_setup; 2571 STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next); 2572 m = rsu_rxeof(xfer, data); 2573 STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next); 2574 /* FALLTHROUGH */ 2575 case USB_ST_SETUP: 2576 tr_setup: 2577 data = STAILQ_FIRST(&sc->sc_rx_inactive); 2578 if (data == NULL) { 2579 KASSERT(m == NULL, ("mbuf isn't NULL")); 2580 return; 2581 } 2582 STAILQ_REMOVE_HEAD(&sc->sc_rx_inactive, next); 2583 STAILQ_INSERT_TAIL(&sc->sc_rx_active, data, next); 2584 usbd_xfer_set_frame_data(xfer, 0, data->buf, 2585 usbd_xfer_max_len(xfer)); 2586 usbd_transfer_submit(xfer); 2587 /* 2588 * To avoid LOR we should unlock our private mutex here to call 2589 * ieee80211_input() because here is at the end of a USB 2590 * callback and safe to unlock. 2591 */ 2592 NET_EPOCH_ENTER(et); 2593 while (m != NULL) { 2594 next = m->m_next; 2595 m->m_next = NULL; 2596 2597 ni = rsu_rx_frame(sc, m); 2598 RSU_UNLOCK(sc); 2599 2600 if (ni != NULL) { 2601 if (ni->ni_flags & IEEE80211_NODE_HT) 2602 m->m_flags |= M_AMPDU; 2603 (void)ieee80211_input_mimo(ni, m); 2604 ieee80211_free_node(ni); 2605 } else 2606 (void)ieee80211_input_mimo_all(ic, m); 2607 2608 RSU_LOCK(sc); 2609 m = next; 2610 } 2611 NET_EPOCH_EXIT(et); 2612 break; 2613 default: 2614 /* needs it to the inactive queue due to a error. */ 2615 data = STAILQ_FIRST(&sc->sc_rx_active); 2616 if (data != NULL) { 2617 STAILQ_REMOVE_HEAD(&sc->sc_rx_active, next); 2618 STAILQ_INSERT_TAIL(&sc->sc_rx_inactive, data, next); 2619 } 2620 if (error != USB_ERR_CANCELLED) { 2621 usbd_xfer_set_stall(xfer); 2622 counter_u64_add(ic->ic_ierrors, 1); 2623 goto tr_setup; 2624 } 2625 break; 2626 } 2627 2628 } 2629 2630 static void 2631 rsu_txeof(struct usb_xfer *xfer, struct rsu_data *data) 2632 { 2633 #ifdef USB_DEBUG 2634 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2635 #endif 2636 2637 RSU_DPRINTF(sc, RSU_DEBUG_TXDONE, "%s: called; data=%p\n", 2638 __func__, 2639 data); 2640 2641 if (data->m) { 2642 /* XXX status? */ 2643 ieee80211_tx_complete(data->ni, data->m, 0); 2644 data->m = NULL; 2645 data->ni = NULL; 2646 } 2647 } 2648 2649 static void 2650 rsu_bulk_tx_callback_sub(struct usb_xfer *xfer, usb_error_t error, 2651 uint8_t which) 2652 { 2653 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2654 struct ieee80211com *ic = &sc->sc_ic; 2655 struct rsu_data *data; 2656 2657 RSU_ASSERT_LOCKED(sc); 2658 2659 switch (USB_GET_STATE(xfer)) { 2660 case USB_ST_TRANSFERRED: 2661 data = STAILQ_FIRST(&sc->sc_tx_active[which]); 2662 if (data == NULL) 2663 goto tr_setup; 2664 RSU_DPRINTF(sc, RSU_DEBUG_TXDONE, "%s: transfer done %p\n", 2665 __func__, data); 2666 STAILQ_REMOVE_HEAD(&sc->sc_tx_active[which], next); 2667 rsu_txeof(xfer, data); 2668 rsu_freebuf(sc, data); 2669 /* FALLTHROUGH */ 2670 case USB_ST_SETUP: 2671 tr_setup: 2672 data = STAILQ_FIRST(&sc->sc_tx_pending[which]); 2673 if (data == NULL) { 2674 RSU_DPRINTF(sc, RSU_DEBUG_TXDONE, 2675 "%s: empty pending queue sc %p\n", __func__, sc); 2676 return; 2677 } 2678 STAILQ_REMOVE_HEAD(&sc->sc_tx_pending[which], next); 2679 STAILQ_INSERT_TAIL(&sc->sc_tx_active[which], data, next); 2680 usbd_xfer_set_frame_data(xfer, 0, data->buf, data->buflen); 2681 RSU_DPRINTF(sc, RSU_DEBUG_TXDONE, 2682 "%s: submitting transfer %p\n", 2683 __func__, 2684 data); 2685 usbd_transfer_submit(xfer); 2686 break; 2687 default: 2688 data = STAILQ_FIRST(&sc->sc_tx_active[which]); 2689 if (data != NULL) { 2690 STAILQ_REMOVE_HEAD(&sc->sc_tx_active[which], next); 2691 rsu_txeof(xfer, data); 2692 rsu_freebuf(sc, data); 2693 } 2694 counter_u64_add(ic->ic_oerrors, 1); 2695 2696 if (error != USB_ERR_CANCELLED) { 2697 usbd_xfer_set_stall(xfer); 2698 goto tr_setup; 2699 } 2700 break; 2701 } 2702 2703 /* 2704 * XXX TODO: if the queue is low, flush out FF TX frames. 2705 * Remember to unlock the driver for now; net80211 doesn't 2706 * defer it for us. 2707 */ 2708 } 2709 2710 static void 2711 rsu_bulk_tx_callback_be_bk(struct usb_xfer *xfer, usb_error_t error) 2712 { 2713 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2714 2715 rsu_bulk_tx_callback_sub(xfer, error, RSU_BULK_TX_BE_BK); 2716 2717 /* This kicks the TX taskqueue */ 2718 rsu_start(sc); 2719 } 2720 2721 static void 2722 rsu_bulk_tx_callback_vi_vo(struct usb_xfer *xfer, usb_error_t error) 2723 { 2724 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2725 2726 rsu_bulk_tx_callback_sub(xfer, error, RSU_BULK_TX_VI_VO); 2727 2728 /* This kicks the TX taskqueue */ 2729 rsu_start(sc); 2730 } 2731 2732 static void 2733 rsu_bulk_tx_callback_h2c(struct usb_xfer *xfer, usb_error_t error) 2734 { 2735 struct rsu_softc *sc = usbd_xfer_softc(xfer); 2736 2737 rsu_bulk_tx_callback_sub(xfer, error, RSU_BULK_TX_H2C); 2738 2739 /* This kicks the TX taskqueue */ 2740 rsu_start(sc); 2741 } 2742 2743 /* 2744 * Transmit the given frame. 2745 * 2746 * This doesn't free the node or mbuf upon failure. 2747 */ 2748 static int 2749 rsu_tx_start(struct rsu_softc *sc, struct ieee80211_node *ni, 2750 struct mbuf *m0, struct rsu_data *data) 2751 { 2752 const struct ieee80211_txparam *tp = ni->ni_txparms; 2753 struct ieee80211vap *vap = ni->ni_vap; 2754 struct ieee80211_frame *wh; 2755 struct ieee80211_key *k = NULL; 2756 struct r92s_tx_desc *txd; 2757 uint8_t rate, ridx, type, cipher, qos; 2758 int prio = 0; 2759 uint8_t which; 2760 int hasqos; 2761 int ismcast; 2762 int xferlen; 2763 int qid; 2764 2765 RSU_ASSERT_LOCKED(sc); 2766 2767 wh = mtod(m0, struct ieee80211_frame *); 2768 type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK; 2769 ismcast = IEEE80211_IS_MULTICAST(wh->i_addr1); 2770 2771 RSU_DPRINTF(sc, RSU_DEBUG_TX, "%s: data=%p, m=%p\n", 2772 __func__, data, m0); 2773 2774 /* Choose a TX rate index. */ 2775 if (type == IEEE80211_FC0_TYPE_MGT || 2776 type == IEEE80211_FC0_TYPE_CTL || 2777 (m0->m_flags & M_EAPOL) != 0) 2778 rate = tp->mgmtrate; 2779 else if (ismcast) 2780 rate = tp->mcastrate; 2781 else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) 2782 rate = tp->ucastrate; 2783 else 2784 rate = 0; 2785 2786 if (rate != 0) 2787 ridx = rate2ridx(rate); 2788 2789 if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) { 2790 k = ieee80211_crypto_encap(ni, m0); 2791 if (k == NULL) { 2792 device_printf(sc->sc_dev, 2793 "ieee80211_crypto_encap returns NULL.\n"); 2794 /* XXX we don't expect the fragmented frames */ 2795 return (ENOBUFS); 2796 } 2797 wh = mtod(m0, struct ieee80211_frame *); 2798 } 2799 /* If we have QoS then use it */ 2800 /* XXX TODO: mbuf WME/PRI versus TID? */ 2801 if (IEEE80211_QOS_HAS_SEQ(wh)) { 2802 /* Has QoS */ 2803 prio = M_WME_GETAC(m0); 2804 which = rsu_wme_ac_xfer_map[prio]; 2805 hasqos = 1; 2806 qos = ((const struct ieee80211_qosframe *)wh)->i_qos[0]; 2807 } else { 2808 /* Non-QoS TID */ 2809 /* XXX TODO: tid=0 for non-qos TID? */ 2810 which = rsu_wme_ac_xfer_map[WME_AC_BE]; 2811 hasqos = 0; 2812 prio = 0; 2813 qos = 0; 2814 } 2815 2816 qid = rsu_ac2qid[prio]; 2817 #if 0 2818 switch (type) { 2819 case IEEE80211_FC0_TYPE_CTL: 2820 case IEEE80211_FC0_TYPE_MGT: 2821 which = rsu_wme_ac_xfer_map[WME_AC_VO]; 2822 break; 2823 default: 2824 which = rsu_wme_ac_xfer_map[M_WME_GETAC(m0)]; 2825 break; 2826 } 2827 hasqos = 0; 2828 #endif 2829 2830 RSU_DPRINTF(sc, RSU_DEBUG_TX, "%s: pri=%d, which=%d, hasqos=%d\n", 2831 __func__, 2832 prio, 2833 which, 2834 hasqos); 2835 2836 /* Fill Tx descriptor. */ 2837 txd = (struct r92s_tx_desc *)data->buf; 2838 memset(txd, 0, sizeof(*txd)); 2839 2840 txd->txdw0 |= htole32( 2841 SM(R92S_TXDW0_PKTLEN, m0->m_pkthdr.len) | 2842 SM(R92S_TXDW0_OFFSET, sizeof(*txd)) | 2843 R92S_TXDW0_OWN | R92S_TXDW0_FSG | R92S_TXDW0_LSG); 2844 2845 txd->txdw1 |= htole32( 2846 SM(R92S_TXDW1_MACID, R92S_MACID_BSS) | SM(R92S_TXDW1_QSEL, qid)); 2847 if (!hasqos) 2848 txd->txdw1 |= htole32(R92S_TXDW1_NONQOS); 2849 if (k != NULL && !(k->wk_flags & IEEE80211_KEY_SWENCRYPT)) { 2850 switch (k->wk_cipher->ic_cipher) { 2851 case IEEE80211_CIPHER_WEP: 2852 cipher = R92S_TXDW1_CIPHER_WEP; 2853 break; 2854 case IEEE80211_CIPHER_TKIP: 2855 cipher = R92S_TXDW1_CIPHER_TKIP; 2856 break; 2857 case IEEE80211_CIPHER_AES_CCM: 2858 cipher = R92S_TXDW1_CIPHER_AES; 2859 break; 2860 default: 2861 cipher = R92S_TXDW1_CIPHER_NONE; 2862 } 2863 txd->txdw1 |= htole32( 2864 SM(R92S_TXDW1_CIPHER, cipher) | 2865 SM(R92S_TXDW1_KEYIDX, k->wk_keyix)); 2866 } 2867 /* XXX todo: set AGGEN bit if appropriate? */ 2868 txd->txdw2 |= htole32(R92S_TXDW2_BK); 2869 if (ismcast) 2870 txd->txdw2 |= htole32(R92S_TXDW2_BMCAST); 2871 2872 if (!ismcast && (!qos || (qos & IEEE80211_QOS_ACKPOLICY) != 2873 IEEE80211_QOS_ACKPOLICY_NOACK)) { 2874 txd->txdw2 |= htole32(R92S_TXDW2_RTY_LMT_ENA); 2875 txd->txdw2 |= htole32(SM(R92S_TXDW2_RTY_LMT, tp->maxretry)); 2876 } 2877 2878 /* Force mgmt / mcast / ucast rate if needed. */ 2879 if (rate != 0) { 2880 /* Data rate fallback limit (max). */ 2881 txd->txdw5 |= htole32(SM(R92S_TXDW5_DATARATE_FB_LMT, 0x1f)); 2882 txd->txdw5 |= htole32(SM(R92S_TXDW5_DATARATE, ridx)); 2883 txd->txdw4 |= htole32(R92S_TXDW4_DRVRATE); 2884 } 2885 2886 /* 2887 * Firmware will use and increment the sequence number for the 2888 * specified priority. 2889 */ 2890 txd->txdw3 |= htole32(SM(R92S_TXDW3_SEQ, prio)); 2891 2892 if (ieee80211_radiotap_active_vap(vap)) { 2893 struct rsu_tx_radiotap_header *tap = &sc->sc_txtap; 2894 2895 tap->wt_flags = 0; 2896 ieee80211_radiotap_tx(vap, m0); 2897 } 2898 2899 xferlen = sizeof(*txd) + m0->m_pkthdr.len; 2900 KASSERT(xferlen <= RSU_TXBUFSZ, ("%s: invalid length", __func__)); 2901 m_copydata(m0, 0, m0->m_pkthdr.len, (caddr_t)&txd[1]); 2902 2903 data->buflen = xferlen; 2904 data->ni = ni; 2905 data->m = m0; 2906 STAILQ_INSERT_TAIL(&sc->sc_tx_pending[which], data, next); 2907 2908 /* start transfer, if any */ 2909 usbd_transfer_start(sc->sc_xfer[which]); 2910 return (0); 2911 } 2912 2913 static int 2914 rsu_transmit(struct ieee80211com *ic, struct mbuf *m) 2915 { 2916 struct rsu_softc *sc = ic->ic_softc; 2917 int error; 2918 2919 RSU_LOCK(sc); 2920 if (!sc->sc_running) { 2921 RSU_UNLOCK(sc); 2922 return (ENXIO); 2923 } 2924 2925 /* 2926 * XXX TODO: ensure that we treat 'm' as a list of frames 2927 * to transmit! 2928 */ 2929 error = mbufq_enqueue(&sc->sc_snd, m); 2930 if (error) { 2931 RSU_DPRINTF(sc, RSU_DEBUG_TX, 2932 "%s: mbufq_enable: failed (%d)\n", 2933 __func__, 2934 error); 2935 RSU_UNLOCK(sc); 2936 return (error); 2937 } 2938 RSU_UNLOCK(sc); 2939 2940 /* This kicks the TX taskqueue */ 2941 rsu_start(sc); 2942 2943 return (0); 2944 } 2945 2946 static void 2947 rsu_drain_mbufq(struct rsu_softc *sc) 2948 { 2949 struct mbuf *m; 2950 struct ieee80211_node *ni; 2951 2952 RSU_ASSERT_LOCKED(sc); 2953 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 2954 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 2955 m->m_pkthdr.rcvif = NULL; 2956 ieee80211_free_node(ni); 2957 m_freem(m); 2958 } 2959 } 2960 2961 static void 2962 _rsu_start(struct rsu_softc *sc) 2963 { 2964 struct ieee80211_node *ni; 2965 struct rsu_data *bf; 2966 struct mbuf *m; 2967 2968 RSU_ASSERT_LOCKED(sc); 2969 2970 while ((m = mbufq_dequeue(&sc->sc_snd)) != NULL) { 2971 bf = rsu_getbuf(sc); 2972 if (bf == NULL) { 2973 RSU_DPRINTF(sc, RSU_DEBUG_TX, 2974 "%s: failed to get buffer\n", __func__); 2975 mbufq_prepend(&sc->sc_snd, m); 2976 break; 2977 } 2978 2979 ni = (struct ieee80211_node *)m->m_pkthdr.rcvif; 2980 m->m_pkthdr.rcvif = NULL; 2981 2982 if (rsu_tx_start(sc, ni, m, bf) != 0) { 2983 RSU_DPRINTF(sc, RSU_DEBUG_TX, 2984 "%s: failed to transmit\n", __func__); 2985 if_inc_counter(ni->ni_vap->iv_ifp, 2986 IFCOUNTER_OERRORS, 1); 2987 rsu_freebuf(sc, bf); 2988 ieee80211_free_node(ni); 2989 m_freem(m); 2990 break; 2991 } 2992 } 2993 } 2994 2995 static void 2996 rsu_start(struct rsu_softc *sc) 2997 { 2998 2999 taskqueue_enqueue(taskqueue_thread, &sc->tx_task); 3000 } 3001 3002 static int 3003 rsu_ioctl_net(struct ieee80211com *ic, u_long cmd, void *data) 3004 { 3005 struct rsu_softc *sc = ic->ic_softc; 3006 struct ifreq *ifr = (struct ifreq *)data; 3007 int error; 3008 3009 error = 0; 3010 switch (cmd) { 3011 case SIOCSIFCAP: 3012 { 3013 struct ieee80211vap *vap; 3014 int rxmask; 3015 3016 rxmask = ifr->ifr_reqcap & (IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6); 3017 3018 RSU_LOCK(sc); 3019 /* Both RXCSUM bits must be set (or unset). */ 3020 if (sc->sc_rx_checksum_enable && 3021 rxmask != (IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6)) { 3022 rxmask = 0; 3023 sc->sc_rx_checksum_enable = 0; 3024 rsu_rxfilter_set(sc, R92S_RCR_TCP_OFFLD_EN, 0); 3025 } else if (!sc->sc_rx_checksum_enable && rxmask != 0) { 3026 rxmask = IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6; 3027 sc->sc_rx_checksum_enable = 1; 3028 rsu_rxfilter_set(sc, 0, R92S_RCR_TCP_OFFLD_EN); 3029 } else { 3030 /* Nothing to do. */ 3031 RSU_UNLOCK(sc); 3032 break; 3033 } 3034 RSU_UNLOCK(sc); 3035 3036 IEEE80211_LOCK(ic); /* XXX */ 3037 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 3038 struct ifnet *ifp = vap->iv_ifp; 3039 3040 ifp->if_capenable &= 3041 ~(IFCAP_RXCSUM | IFCAP_RXCSUM_IPV6); 3042 ifp->if_capenable |= rxmask; 3043 } 3044 IEEE80211_UNLOCK(ic); 3045 break; 3046 } 3047 default: 3048 error = ENOTTY; /* for net80211 */ 3049 break; 3050 } 3051 3052 return (error); 3053 } 3054 3055 static void 3056 rsu_parent(struct ieee80211com *ic) 3057 { 3058 struct rsu_softc *sc = ic->ic_softc; 3059 3060 if (ic->ic_nrunning > 0) { 3061 if (rsu_init(sc) == 0) 3062 ieee80211_start_all(ic); 3063 else { 3064 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3065 if (vap != NULL) 3066 ieee80211_stop(vap); 3067 } 3068 } else 3069 rsu_stop(sc); 3070 } 3071 3072 /* 3073 * Power on sequence for A-cut adapters. 3074 */ 3075 static void 3076 rsu_power_on_acut(struct rsu_softc *sc) 3077 { 3078 uint32_t reg; 3079 3080 rsu_write_1(sc, R92S_SPS0_CTRL + 1, 0x53); 3081 rsu_write_1(sc, R92S_SPS0_CTRL + 0, 0x57); 3082 3083 /* Enable AFE macro block's bandgap and Mbias. */ 3084 rsu_write_1(sc, R92S_AFE_MISC, 3085 rsu_read_1(sc, R92S_AFE_MISC) | 3086 R92S_AFE_MISC_BGEN | R92S_AFE_MISC_MBEN); 3087 /* Enable LDOA15 block. */ 3088 rsu_write_1(sc, R92S_LDOA15_CTRL, 3089 rsu_read_1(sc, R92S_LDOA15_CTRL) | R92S_LDA15_EN); 3090 3091 rsu_write_1(sc, R92S_SPS1_CTRL, 3092 rsu_read_1(sc, R92S_SPS1_CTRL) | R92S_SPS1_LDEN); 3093 rsu_ms_delay(sc, 2000); 3094 /* Enable switch regulator block. */ 3095 rsu_write_1(sc, R92S_SPS1_CTRL, 3096 rsu_read_1(sc, R92S_SPS1_CTRL) | R92S_SPS1_SWEN); 3097 3098 rsu_write_4(sc, R92S_SPS1_CTRL, 0x00a7b267); 3099 3100 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 1, 3101 rsu_read_1(sc, R92S_SYS_ISO_CTRL + 1) | 0x08); 3102 3103 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3104 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x20); 3105 3106 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 1, 3107 rsu_read_1(sc, R92S_SYS_ISO_CTRL + 1) & ~0x90); 3108 3109 /* Enable AFE clock. */ 3110 rsu_write_1(sc, R92S_AFE_XTAL_CTRL + 1, 3111 rsu_read_1(sc, R92S_AFE_XTAL_CTRL + 1) & ~0x04); 3112 /* Enable AFE PLL macro block. */ 3113 rsu_write_1(sc, R92S_AFE_PLL_CTRL, 3114 rsu_read_1(sc, R92S_AFE_PLL_CTRL) | 0x11); 3115 /* Attach AFE PLL to MACTOP/BB. */ 3116 rsu_write_1(sc, R92S_SYS_ISO_CTRL, 3117 rsu_read_1(sc, R92S_SYS_ISO_CTRL) & ~0x11); 3118 3119 /* Switch to 40MHz clock instead of 80MHz. */ 3120 rsu_write_2(sc, R92S_SYS_CLKR, 3121 rsu_read_2(sc, R92S_SYS_CLKR) & ~R92S_SYS_CLKSEL); 3122 3123 /* Enable MAC clock. */ 3124 rsu_write_2(sc, R92S_SYS_CLKR, 3125 rsu_read_2(sc, R92S_SYS_CLKR) | 3126 R92S_MAC_CLK_EN | R92S_SYS_CLK_EN); 3127 3128 rsu_write_1(sc, R92S_PMC_FSM, 0x02); 3129 3130 /* Enable digital core and IOREG R/W. */ 3131 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3132 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x08); 3133 3134 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3135 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x80); 3136 3137 /* Switch the control path to firmware. */ 3138 reg = rsu_read_2(sc, R92S_SYS_CLKR); 3139 reg = (reg & ~R92S_SWHW_SEL) | R92S_FWHW_SEL; 3140 rsu_write_2(sc, R92S_SYS_CLKR, reg); 3141 3142 rsu_write_2(sc, R92S_CR, 0x37fc); 3143 3144 /* Fix USB RX FIFO issue. */ 3145 rsu_write_1(sc, 0xfe5c, 3146 rsu_read_1(sc, 0xfe5c) | 0x80); 3147 rsu_write_1(sc, 0x00ab, 3148 rsu_read_1(sc, 0x00ab) | 0xc0); 3149 3150 rsu_write_1(sc, R92S_SYS_CLKR, 3151 rsu_read_1(sc, R92S_SYS_CLKR) & ~R92S_SYS_CPU_CLKSEL); 3152 } 3153 3154 /* 3155 * Power on sequence for B-cut and C-cut adapters. 3156 */ 3157 static void 3158 rsu_power_on_bcut(struct rsu_softc *sc) 3159 { 3160 uint32_t reg; 3161 int ntries; 3162 3163 /* Prevent eFuse leakage. */ 3164 rsu_write_1(sc, 0x37, 0xb0); 3165 rsu_ms_delay(sc, 10); 3166 rsu_write_1(sc, 0x37, 0x30); 3167 3168 /* Switch the control path to hardware. */ 3169 reg = rsu_read_2(sc, R92S_SYS_CLKR); 3170 if (reg & R92S_FWHW_SEL) { 3171 rsu_write_2(sc, R92S_SYS_CLKR, 3172 reg & ~(R92S_SWHW_SEL | R92S_FWHW_SEL)); 3173 } 3174 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3175 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) & ~0x8c); 3176 rsu_ms_delay(sc, 1); 3177 3178 rsu_write_1(sc, R92S_SPS0_CTRL + 1, 0x53); 3179 rsu_write_1(sc, R92S_SPS0_CTRL + 0, 0x57); 3180 3181 reg = rsu_read_1(sc, R92S_AFE_MISC); 3182 rsu_write_1(sc, R92S_AFE_MISC, reg | R92S_AFE_MISC_BGEN); 3183 rsu_write_1(sc, R92S_AFE_MISC, reg | R92S_AFE_MISC_BGEN | 3184 R92S_AFE_MISC_MBEN | R92S_AFE_MISC_I32_EN); 3185 3186 /* Enable PLL. */ 3187 rsu_write_1(sc, R92S_LDOA15_CTRL, 3188 rsu_read_1(sc, R92S_LDOA15_CTRL) | R92S_LDA15_EN); 3189 3190 rsu_write_1(sc, R92S_LDOV12D_CTRL, 3191 rsu_read_1(sc, R92S_LDOV12D_CTRL) | R92S_LDV12_EN); 3192 3193 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 1, 3194 rsu_read_1(sc, R92S_SYS_ISO_CTRL + 1) | 0x08); 3195 3196 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3197 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x20); 3198 3199 /* Support 64KB IMEM. */ 3200 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 1, 3201 rsu_read_1(sc, R92S_SYS_ISO_CTRL + 1) & ~0x97); 3202 3203 /* Enable AFE clock. */ 3204 rsu_write_1(sc, R92S_AFE_XTAL_CTRL + 1, 3205 rsu_read_1(sc, R92S_AFE_XTAL_CTRL + 1) & ~0x04); 3206 /* Enable AFE PLL macro block. */ 3207 reg = rsu_read_1(sc, R92S_AFE_PLL_CTRL); 3208 rsu_write_1(sc, R92S_AFE_PLL_CTRL, reg | 0x11); 3209 rsu_ms_delay(sc, 1); 3210 rsu_write_1(sc, R92S_AFE_PLL_CTRL, reg | 0x51); 3211 rsu_ms_delay(sc, 1); 3212 rsu_write_1(sc, R92S_AFE_PLL_CTRL, reg | 0x11); 3213 rsu_ms_delay(sc, 1); 3214 3215 /* Attach AFE PLL to MACTOP/BB. */ 3216 rsu_write_1(sc, R92S_SYS_ISO_CTRL, 3217 rsu_read_1(sc, R92S_SYS_ISO_CTRL) & ~0x11); 3218 3219 /* Switch to 40MHz clock. */ 3220 rsu_write_1(sc, R92S_SYS_CLKR, 0x00); 3221 /* Disable CPU clock and 80MHz SSC. */ 3222 rsu_write_1(sc, R92S_SYS_CLKR, 3223 rsu_read_1(sc, R92S_SYS_CLKR) | 0xa0); 3224 /* Enable MAC clock. */ 3225 rsu_write_2(sc, R92S_SYS_CLKR, 3226 rsu_read_2(sc, R92S_SYS_CLKR) | 3227 R92S_MAC_CLK_EN | R92S_SYS_CLK_EN); 3228 3229 rsu_write_1(sc, R92S_PMC_FSM, 0x02); 3230 3231 /* Enable digital core and IOREG R/W. */ 3232 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3233 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x08); 3234 3235 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 3236 rsu_read_1(sc, R92S_SYS_FUNC_EN + 1) | 0x80); 3237 3238 /* Switch the control path to firmware. */ 3239 reg = rsu_read_2(sc, R92S_SYS_CLKR); 3240 reg = (reg & ~R92S_SWHW_SEL) | R92S_FWHW_SEL; 3241 rsu_write_2(sc, R92S_SYS_CLKR, reg); 3242 3243 rsu_write_2(sc, R92S_CR, 0x37fc); 3244 3245 /* Fix USB RX FIFO issue. */ 3246 rsu_write_1(sc, 0xfe5c, 3247 rsu_read_1(sc, 0xfe5c) | 0x80); 3248 3249 rsu_write_1(sc, R92S_SYS_CLKR, 3250 rsu_read_1(sc, R92S_SYS_CLKR) & ~R92S_SYS_CPU_CLKSEL); 3251 3252 rsu_write_1(sc, 0xfe1c, 0x80); 3253 3254 /* Make sure TxDMA is ready to download firmware. */ 3255 for (ntries = 0; ntries < 20; ntries++) { 3256 reg = rsu_read_1(sc, R92S_TCR); 3257 if ((reg & (R92S_TCR_IMEM_CHK_RPT | R92S_TCR_EMEM_CHK_RPT)) == 3258 (R92S_TCR_IMEM_CHK_RPT | R92S_TCR_EMEM_CHK_RPT)) 3259 break; 3260 rsu_ms_delay(sc, 1); 3261 } 3262 if (ntries == 20) { 3263 RSU_DPRINTF(sc, RSU_DEBUG_RESET | RSU_DEBUG_TX, 3264 "%s: TxDMA is not ready\n", 3265 __func__); 3266 /* Reset TxDMA. */ 3267 reg = rsu_read_1(sc, R92S_CR); 3268 rsu_write_1(sc, R92S_CR, reg & ~R92S_CR_TXDMA_EN); 3269 rsu_ms_delay(sc, 1); 3270 rsu_write_1(sc, R92S_CR, reg | R92S_CR_TXDMA_EN); 3271 } 3272 } 3273 3274 static void 3275 rsu_power_off(struct rsu_softc *sc) 3276 { 3277 /* Turn RF off. */ 3278 rsu_write_1(sc, R92S_RF_CTRL, 0x00); 3279 rsu_ms_delay(sc, 5); 3280 3281 /* Turn MAC off. */ 3282 /* Switch control path. */ 3283 rsu_write_1(sc, R92S_SYS_CLKR + 1, 0x38); 3284 /* Reset MACTOP. */ 3285 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 0x70); 3286 rsu_write_1(sc, R92S_PMC_FSM, 0x06); 3287 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 0, 0xf9); 3288 rsu_write_1(sc, R92S_SYS_ISO_CTRL + 1, 0xe8); 3289 3290 /* Disable AFE PLL. */ 3291 rsu_write_1(sc, R92S_AFE_PLL_CTRL, 0x00); 3292 /* Disable A15V. */ 3293 rsu_write_1(sc, R92S_LDOA15_CTRL, 0x54); 3294 /* Disable eFuse 1.2V. */ 3295 rsu_write_1(sc, R92S_SYS_FUNC_EN + 1, 0x50); 3296 rsu_write_1(sc, R92S_LDOV12D_CTRL, 0x24); 3297 /* Enable AFE macro block's bandgap and Mbias. */ 3298 rsu_write_1(sc, R92S_AFE_MISC, 0x30); 3299 /* Disable 1.6V LDO. */ 3300 rsu_write_1(sc, R92S_SPS0_CTRL + 0, 0x56); 3301 rsu_write_1(sc, R92S_SPS0_CTRL + 1, 0x43); 3302 3303 /* Firmware - tell it to switch things off */ 3304 (void) rsu_set_fw_power_state(sc, RSU_PWR_OFF); 3305 } 3306 3307 static int 3308 rsu_fw_loadsection(struct rsu_softc *sc, const uint8_t *buf, int len) 3309 { 3310 const uint8_t which = rsu_wme_ac_xfer_map[WME_AC_VO]; 3311 struct rsu_data *data; 3312 struct r92s_tx_desc *txd; 3313 int mlen; 3314 3315 while (len > 0) { 3316 data = rsu_getbuf(sc); 3317 if (data == NULL) 3318 return (ENOMEM); 3319 txd = (struct r92s_tx_desc *)data->buf; 3320 memset(txd, 0, sizeof(*txd)); 3321 if (len <= RSU_TXBUFSZ - sizeof(*txd)) { 3322 /* Last chunk. */ 3323 txd->txdw0 |= htole32(R92S_TXDW0_LINIP); 3324 mlen = len; 3325 } else 3326 mlen = RSU_TXBUFSZ - sizeof(*txd); 3327 txd->txdw0 |= htole32(SM(R92S_TXDW0_PKTLEN, mlen)); 3328 memcpy(&txd[1], buf, mlen); 3329 data->buflen = sizeof(*txd) + mlen; 3330 RSU_DPRINTF(sc, RSU_DEBUG_TX | RSU_DEBUG_FW | RSU_DEBUG_RESET, 3331 "%s: starting transfer %p\n", 3332 __func__, data); 3333 STAILQ_INSERT_TAIL(&sc->sc_tx_pending[which], data, next); 3334 buf += mlen; 3335 len -= mlen; 3336 } 3337 usbd_transfer_start(sc->sc_xfer[which]); 3338 return (0); 3339 } 3340 3341 CTASSERT(sizeof(size_t) >= sizeof(uint32_t)); 3342 3343 static int 3344 rsu_load_firmware(struct rsu_softc *sc) 3345 { 3346 const struct r92s_fw_hdr *hdr; 3347 struct r92s_fw_priv dmem; 3348 struct ieee80211com *ic = &sc->sc_ic; 3349 const uint8_t *imem, *emem; 3350 uint32_t imemsz, ememsz; 3351 const struct firmware *fw; 3352 size_t size; 3353 uint32_t reg; 3354 int ntries, error; 3355 3356 if (rsu_read_1(sc, R92S_TCR) & R92S_TCR_FWRDY) { 3357 RSU_DPRINTF(sc, RSU_DEBUG_ANY, 3358 "%s: Firmware already loaded\n", 3359 __func__); 3360 return (0); 3361 } 3362 3363 RSU_UNLOCK(sc); 3364 /* Read firmware image from the filesystem. */ 3365 if ((fw = firmware_get("rsu-rtl8712fw")) == NULL) { 3366 device_printf(sc->sc_dev, 3367 "%s: failed load firmware of file rsu-rtl8712fw\n", 3368 __func__); 3369 RSU_LOCK(sc); 3370 return (ENXIO); 3371 } 3372 RSU_LOCK(sc); 3373 size = fw->datasize; 3374 if (size < sizeof(*hdr)) { 3375 device_printf(sc->sc_dev, "firmware too short\n"); 3376 error = EINVAL; 3377 goto fail; 3378 } 3379 hdr = (const struct r92s_fw_hdr *)fw->data; 3380 if (hdr->signature != htole16(0x8712) && 3381 hdr->signature != htole16(0x8192)) { 3382 device_printf(sc->sc_dev, 3383 "invalid firmware signature 0x%x\n", 3384 le16toh(hdr->signature)); 3385 error = EINVAL; 3386 goto fail; 3387 } 3388 RSU_DPRINTF(sc, RSU_DEBUG_FW, "FW V%d %02x-%02x %02x:%02x\n", 3389 le16toh(hdr->version), hdr->month, hdr->day, hdr->hour, 3390 hdr->minute); 3391 3392 /* Make sure that driver and firmware are in sync. */ 3393 if (hdr->privsz != htole32(sizeof(dmem))) { 3394 device_printf(sc->sc_dev, "unsupported firmware image\n"); 3395 error = EINVAL; 3396 goto fail; 3397 } 3398 /* Get FW sections sizes. */ 3399 imemsz = le32toh(hdr->imemsz); 3400 ememsz = le32toh(hdr->sramsz); 3401 /* Check that all FW sections fit in image. */ 3402 if (imemsz > (size_t)(size - sizeof(*hdr)) || 3403 ememsz > (size_t)(size - sizeof(*hdr) - imemsz)) { 3404 device_printf(sc->sc_dev, "firmware too short\n"); 3405 error = EINVAL; 3406 goto fail; 3407 } 3408 imem = (const uint8_t *)&hdr[1]; 3409 emem = imem + imemsz; 3410 3411 /* Load IMEM section. */ 3412 error = rsu_fw_loadsection(sc, imem, imemsz); 3413 if (error != 0) { 3414 device_printf(sc->sc_dev, 3415 "could not load firmware section %s\n", "IMEM"); 3416 goto fail; 3417 } 3418 /* Wait for load to complete. */ 3419 for (ntries = 0; ntries != 50; ntries++) { 3420 rsu_ms_delay(sc, 10); 3421 reg = rsu_read_1(sc, R92S_TCR); 3422 if (reg & R92S_TCR_IMEM_CODE_DONE) 3423 break; 3424 } 3425 if (ntries == 50) { 3426 device_printf(sc->sc_dev, "timeout waiting for IMEM transfer\n"); 3427 error = ETIMEDOUT; 3428 goto fail; 3429 } 3430 /* Load EMEM section. */ 3431 error = rsu_fw_loadsection(sc, emem, ememsz); 3432 if (error != 0) { 3433 device_printf(sc->sc_dev, 3434 "could not load firmware section %s\n", "EMEM"); 3435 goto fail; 3436 } 3437 /* Wait for load to complete. */ 3438 for (ntries = 0; ntries != 50; ntries++) { 3439 rsu_ms_delay(sc, 10); 3440 reg = rsu_read_2(sc, R92S_TCR); 3441 if (reg & R92S_TCR_EMEM_CODE_DONE) 3442 break; 3443 } 3444 if (ntries == 50) { 3445 device_printf(sc->sc_dev, "timeout waiting for EMEM transfer\n"); 3446 error = ETIMEDOUT; 3447 goto fail; 3448 } 3449 /* Enable CPU. */ 3450 rsu_write_1(sc, R92S_SYS_CLKR, 3451 rsu_read_1(sc, R92S_SYS_CLKR) | R92S_SYS_CPU_CLKSEL); 3452 if (!(rsu_read_1(sc, R92S_SYS_CLKR) & R92S_SYS_CPU_CLKSEL)) { 3453 device_printf(sc->sc_dev, "could not enable system clock\n"); 3454 error = EIO; 3455 goto fail; 3456 } 3457 rsu_write_2(sc, R92S_SYS_FUNC_EN, 3458 rsu_read_2(sc, R92S_SYS_FUNC_EN) | R92S_FEN_CPUEN); 3459 if (!(rsu_read_2(sc, R92S_SYS_FUNC_EN) & R92S_FEN_CPUEN)) { 3460 device_printf(sc->sc_dev, 3461 "could not enable microcontroller\n"); 3462 error = EIO; 3463 goto fail; 3464 } 3465 /* Wait for CPU to initialize. */ 3466 for (ntries = 0; ntries < 100; ntries++) { 3467 if (rsu_read_1(sc, R92S_TCR) & R92S_TCR_IMEM_RDY) 3468 break; 3469 rsu_ms_delay(sc, 1); 3470 } 3471 if (ntries == 100) { 3472 device_printf(sc->sc_dev, 3473 "timeout waiting for microcontroller\n"); 3474 error = ETIMEDOUT; 3475 goto fail; 3476 } 3477 3478 /* Update DMEM section before loading. */ 3479 memset(&dmem, 0, sizeof(dmem)); 3480 dmem.hci_sel = R92S_HCI_SEL_USB | R92S_HCI_SEL_8172; 3481 dmem.nendpoints = sc->sc_nendpoints; 3482 dmem.chip_version = sc->cut; 3483 dmem.rf_config = sc->sc_rftype; 3484 dmem.vcs_type = R92S_VCS_TYPE_AUTO; 3485 dmem.vcs_mode = R92S_VCS_MODE_RTS_CTS; 3486 dmem.turbo_mode = 0; 3487 dmem.bw40_en = !! (ic->ic_htcaps & IEEE80211_HTCAP_CHWIDTH40); 3488 dmem.amsdu2ampdu_en = !! (sc->sc_ht); 3489 dmem.ampdu_en = !! (sc->sc_ht); 3490 dmem.agg_offload = !! (sc->sc_ht); 3491 dmem.qos_en = 1; 3492 dmem.ps_offload = 1; 3493 dmem.lowpower_mode = 1; /* XXX TODO: configurable? */ 3494 /* Load DMEM section. */ 3495 error = rsu_fw_loadsection(sc, (uint8_t *)&dmem, sizeof(dmem)); 3496 if (error != 0) { 3497 device_printf(sc->sc_dev, 3498 "could not load firmware section %s\n", "DMEM"); 3499 goto fail; 3500 } 3501 /* Wait for load to complete. */ 3502 for (ntries = 0; ntries < 100; ntries++) { 3503 if (rsu_read_1(sc, R92S_TCR) & R92S_TCR_DMEM_CODE_DONE) 3504 break; 3505 rsu_ms_delay(sc, 1); 3506 } 3507 if (ntries == 100) { 3508 device_printf(sc->sc_dev, "timeout waiting for %s transfer\n", 3509 "DMEM"); 3510 error = ETIMEDOUT; 3511 goto fail; 3512 } 3513 /* Wait for firmware readiness. */ 3514 for (ntries = 0; ntries < 60; ntries++) { 3515 if (!(rsu_read_1(sc, R92S_TCR) & R92S_TCR_FWRDY)) 3516 break; 3517 rsu_ms_delay(sc, 1); 3518 } 3519 if (ntries == 60) { 3520 device_printf(sc->sc_dev, 3521 "timeout waiting for firmware readiness\n"); 3522 error = ETIMEDOUT; 3523 goto fail; 3524 } 3525 fail: 3526 firmware_put(fw, FIRMWARE_UNLOAD); 3527 return (error); 3528 } 3529 3530 static int 3531 rsu_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 3532 const struct ieee80211_bpf_params *params) 3533 { 3534 struct ieee80211com *ic = ni->ni_ic; 3535 struct rsu_softc *sc = ic->ic_softc; 3536 struct rsu_data *bf; 3537 3538 /* prevent management frames from being sent if we're not ready */ 3539 if (!sc->sc_running) { 3540 m_freem(m); 3541 return (ENETDOWN); 3542 } 3543 RSU_LOCK(sc); 3544 bf = rsu_getbuf(sc); 3545 if (bf == NULL) { 3546 m_freem(m); 3547 RSU_UNLOCK(sc); 3548 return (ENOBUFS); 3549 } 3550 if (rsu_tx_start(sc, ni, m, bf) != 0) { 3551 m_freem(m); 3552 rsu_freebuf(sc, bf); 3553 RSU_UNLOCK(sc); 3554 return (EIO); 3555 } 3556 RSU_UNLOCK(sc); 3557 3558 return (0); 3559 } 3560 3561 static void 3562 rsu_rxfilter_init(struct rsu_softc *sc) 3563 { 3564 uint32_t reg; 3565 3566 RSU_ASSERT_LOCKED(sc); 3567 3568 /* Setup multicast filter. */ 3569 rsu_set_multi(sc); 3570 3571 /* Adjust Rx filter. */ 3572 reg = rsu_read_4(sc, R92S_RCR); 3573 reg &= ~R92S_RCR_AICV; 3574 reg |= R92S_RCR_APP_PHYSTS; 3575 if (sc->sc_rx_checksum_enable) 3576 reg |= R92S_RCR_TCP_OFFLD_EN; 3577 rsu_write_4(sc, R92S_RCR, reg); 3578 3579 /* Update dynamic Rx filter parts. */ 3580 rsu_rxfilter_refresh(sc); 3581 } 3582 3583 static void 3584 rsu_rxfilter_set(struct rsu_softc *sc, uint32_t clear, uint32_t set) 3585 { 3586 /* NB: firmware can touch this register too. */ 3587 rsu_write_4(sc, R92S_RCR, 3588 (rsu_read_4(sc, R92S_RCR) & ~clear) | set); 3589 } 3590 3591 static void 3592 rsu_rxfilter_refresh(struct rsu_softc *sc) 3593 { 3594 struct ieee80211com *ic = &sc->sc_ic; 3595 uint32_t mask_all, mask_min; 3596 3597 RSU_ASSERT_LOCKED(sc); 3598 3599 /* NB: RCR_AMF / RXFLTMAP_MGT are used by firmware. */ 3600 mask_all = R92S_RCR_ACF | R92S_RCR_AAP; 3601 mask_min = R92S_RCR_APM; 3602 if (sc->sc_vap_is_running) 3603 mask_min |= R92S_RCR_CBSSID; 3604 else 3605 mask_all |= R92S_RCR_ADF; 3606 3607 if (ic->ic_opmode == IEEE80211_M_MONITOR) { 3608 uint16_t rxfltmap; 3609 if (sc->sc_vap_is_running) 3610 rxfltmap = 0; 3611 else 3612 rxfltmap = R92S_RXFLTMAP_MGT_DEF; 3613 rsu_write_2(sc, R92S_RXFLTMAP_MGT, rxfltmap); 3614 } 3615 3616 if (ic->ic_promisc == 0 && ic->ic_opmode != IEEE80211_M_MONITOR) 3617 rsu_rxfilter_set(sc, mask_all, mask_min); 3618 else 3619 rsu_rxfilter_set(sc, mask_min, mask_all); 3620 } 3621 3622 static int 3623 rsu_init(struct rsu_softc *sc) 3624 { 3625 struct ieee80211com *ic = &sc->sc_ic; 3626 struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps); 3627 uint8_t macaddr[IEEE80211_ADDR_LEN]; 3628 int error; 3629 int i; 3630 3631 RSU_LOCK(sc); 3632 3633 if (sc->sc_running) { 3634 RSU_UNLOCK(sc); 3635 return (0); 3636 } 3637 3638 /* Ensure the mbuf queue is drained */ 3639 rsu_drain_mbufq(sc); 3640 3641 /* Reset power management state. */ 3642 rsu_write_1(sc, R92S_USB_HRPWM, 0); 3643 3644 /* Power on adapter. */ 3645 if (sc->cut == 1) 3646 rsu_power_on_acut(sc); 3647 else 3648 rsu_power_on_bcut(sc); 3649 3650 /* Load firmware. */ 3651 error = rsu_load_firmware(sc); 3652 if (error != 0) 3653 goto fail; 3654 3655 rsu_write_4(sc, R92S_CR, 3656 rsu_read_4(sc, R92S_CR) & ~0xff000000); 3657 3658 /* Use 128 bytes pages. */ 3659 rsu_write_1(sc, 0x00b5, 3660 rsu_read_1(sc, 0x00b5) | 0x01); 3661 /* Enable USB Rx aggregation. */ 3662 rsu_write_1(sc, 0x00bd, 3663 rsu_read_1(sc, 0x00bd) | 0x80); 3664 /* Set USB Rx aggregation threshold. */ 3665 rsu_write_1(sc, 0x00d9, 0x01); 3666 /* Set USB Rx aggregation timeout (1.7ms/4). */ 3667 rsu_write_1(sc, 0xfe5b, 0x04); 3668 /* Fix USB Rx FIFO issue. */ 3669 rsu_write_1(sc, 0xfe5c, 3670 rsu_read_1(sc, 0xfe5c) | 0x80); 3671 3672 /* Set MAC address. */ 3673 IEEE80211_ADDR_COPY(macaddr, vap ? vap->iv_myaddr : ic->ic_macaddr); 3674 rsu_write_region_1(sc, R92S_MACID, macaddr, IEEE80211_ADDR_LEN); 3675 3676 /* It really takes 1.5 seconds for the firmware to boot: */ 3677 usb_pause_mtx(&sc->sc_mtx, USB_MS_TO_TICKS(2000)); 3678 3679 RSU_DPRINTF(sc, RSU_DEBUG_RESET, "%s: setting MAC address to %s\n", 3680 __func__, 3681 ether_sprintf(macaddr)); 3682 error = rsu_fw_cmd(sc, R92S_CMD_SET_MAC_ADDRESS, macaddr, 3683 IEEE80211_ADDR_LEN); 3684 if (error != 0) { 3685 device_printf(sc->sc_dev, "could not set MAC address\n"); 3686 goto fail; 3687 } 3688 3689 /* Initialize Rx filter. */ 3690 rsu_rxfilter_init(sc); 3691 3692 /* Set PS mode fully active */ 3693 error = rsu_set_fw_power_state(sc, RSU_PWR_ACTIVE); 3694 if (error != 0) { 3695 device_printf(sc->sc_dev, "could not set PS mode\n"); 3696 goto fail; 3697 } 3698 3699 /* Install static keys (if any). */ 3700 error = rsu_reinit_static_keys(sc); 3701 if (error != 0) 3702 goto fail; 3703 3704 sc->sc_extra_scan = 0; 3705 usbd_transfer_start(sc->sc_xfer[RSU_BULK_RX]); 3706 3707 /* We're ready to go. */ 3708 sc->sc_running = 1; 3709 RSU_UNLOCK(sc); 3710 3711 return (0); 3712 fail: 3713 /* Need to stop all failed transfers, if any */ 3714 for (i = 0; i != RSU_N_TRANSFER; i++) 3715 usbd_transfer_stop(sc->sc_xfer[i]); 3716 RSU_UNLOCK(sc); 3717 3718 return (error); 3719 } 3720 3721 static void 3722 rsu_stop(struct rsu_softc *sc) 3723 { 3724 int i; 3725 3726 RSU_LOCK(sc); 3727 if (!sc->sc_running) { 3728 RSU_UNLOCK(sc); 3729 return; 3730 } 3731 3732 sc->sc_running = 0; 3733 sc->sc_vap_is_running = 0; 3734 sc->sc_calibrating = 0; 3735 taskqueue_cancel_timeout(taskqueue_thread, &sc->calib_task, NULL); 3736 taskqueue_cancel(taskqueue_thread, &sc->tx_task, NULL); 3737 3738 /* Power off adapter. */ 3739 rsu_power_off(sc); 3740 3741 /* 3742 * CAM is not accessible after shutdown; 3743 * all entries are marked (by firmware?) as invalid. 3744 */ 3745 memset(sc->free_keys_bmap, 0, sizeof(sc->free_keys_bmap)); 3746 memset(sc->keys_bmap, 0, sizeof(sc->keys_bmap)); 3747 3748 for (i = 0; i < RSU_N_TRANSFER; i++) 3749 usbd_transfer_stop(sc->sc_xfer[i]); 3750 3751 /* Ensure the mbuf queue is drained */ 3752 rsu_drain_mbufq(sc); 3753 RSU_UNLOCK(sc); 3754 } 3755 3756 /* 3757 * Note: usb_pause_mtx() actually releases the mutex before calling pause(), 3758 * which breaks any kind of driver serialisation. 3759 */ 3760 static void 3761 rsu_ms_delay(struct rsu_softc *sc, int ms) 3762 { 3763 3764 //usb_pause_mtx(&sc->sc_mtx, hz / 1000); 3765 DELAY(ms * 1000); 3766 } 3767