1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2009 Andrew Thompson 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 #ifndef _USB_USBDI_H_ 27 #define _USB_USBDI_H_ 28 29 struct usb_fifo; 30 struct usb_xfer; 31 struct usb_device; 32 struct usb_attach_arg; 33 struct usb_interface; 34 struct usb_endpoint; 35 struct usb_page_cache; 36 struct usb_page_search; 37 struct usb_process; 38 struct usb_proc_msg; 39 struct usb_mbuf; 40 struct usb_fs_privdata; 41 struct mbuf; 42 43 typedef enum { /* keep in sync with usb_errstr_table */ 44 USB_ERR_NORMAL_COMPLETION = 0, 45 USB_ERR_PENDING_REQUESTS, /* 1 */ 46 USB_ERR_NOT_STARTED, /* 2 */ 47 USB_ERR_INVAL, /* 3 */ 48 USB_ERR_NOMEM, /* 4 */ 49 USB_ERR_CANCELLED, /* 5 */ 50 USB_ERR_BAD_ADDRESS, /* 6 */ 51 USB_ERR_BAD_BUFSIZE, /* 7 */ 52 USB_ERR_BAD_FLAG, /* 8 */ 53 USB_ERR_NO_CALLBACK, /* 9 */ 54 USB_ERR_IN_USE, /* 10 */ 55 USB_ERR_NO_ADDR, /* 11 */ 56 USB_ERR_NO_PIPE, /* 12 */ 57 USB_ERR_ZERO_NFRAMES, /* 13 */ 58 USB_ERR_ZERO_MAXP, /* 14 */ 59 USB_ERR_SET_ADDR_FAILED, /* 15 */ 60 USB_ERR_NO_POWER, /* 16 */ 61 USB_ERR_TOO_DEEP, /* 17 */ 62 USB_ERR_IOERROR, /* 18 */ 63 USB_ERR_NOT_CONFIGURED, /* 19 */ 64 USB_ERR_TIMEOUT, /* 20 */ 65 USB_ERR_SHORT_XFER, /* 21 */ 66 USB_ERR_STALLED, /* 22 */ 67 USB_ERR_INTERRUPTED, /* 23 */ 68 USB_ERR_DMA_LOAD_FAILED, /* 24 */ 69 USB_ERR_BAD_CONTEXT, /* 25 */ 70 USB_ERR_NO_ROOT_HUB, /* 26 */ 71 USB_ERR_NO_INTR_THREAD, /* 27 */ 72 USB_ERR_NOT_LOCKED, /* 28 */ 73 USB_ERR_MAX 74 } usb_error_t; 75 76 /* 77 * Flags for transfers 78 */ 79 #define USB_FORCE_SHORT_XFER 0x0001 /* force a short transmit last */ 80 #define USB_SHORT_XFER_OK 0x0004 /* allow short reads */ 81 #define USB_DELAY_STATUS_STAGE 0x0010 /* insert delay before STATUS stage */ 82 #define USB_USER_DATA_PTR 0x0020 /* internal flag */ 83 #define USB_MULTI_SHORT_OK 0x0040 /* allow multiple short frames */ 84 #define USB_MANUAL_STATUS 0x0080 /* manual ctrl status */ 85 86 #define USB_NO_TIMEOUT 0 87 #define USB_DEFAULT_TIMEOUT 5000 /* 5000 ms = 5 seconds */ 88 89 #if defined(_KERNEL) || defined(_STANDALONE) 90 /* typedefs */ 91 92 typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t); 93 typedef void (usb_proc_callback_t)(struct usb_proc_msg *); 94 typedef usb_error_t (usb_handle_req_t)(struct usb_device *, 95 struct usb_device_request *, const void **, uint16_t *); 96 97 typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags); 98 typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags); 99 typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags); 100 typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo); 101 typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m); 102 103 /* USB events */ 104 #ifndef USB_GLOBAL_INCLUDE_FILE 105 #include <sys/_eventhandler.h> 106 #endif 107 typedef void (*usb_dev_configured_t)(void *, struct usb_device *, 108 struct usb_attach_arg *); 109 EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t); 110 111 /* 112 * The following macros are used used to convert milliseconds into 113 * HZ. We use 1024 instead of 1000 milliseconds per second to save a 114 * full division. 115 */ 116 #define USB_MS_HZ 1024 117 118 #define USB_MS_TO_TICKS(ms) \ 119 (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ) 120 121 /* 122 * Common queue structure for USB transfers. 123 */ 124 struct usb_xfer_queue { 125 TAILQ_HEAD(, usb_xfer) head; 126 struct usb_xfer *curr; /* current USB transfer processed */ 127 void (*command) (struct usb_xfer_queue *pq); 128 uint8_t recurse_1:1; 129 uint8_t recurse_2:1; 130 uint8_t recurse_3:1; 131 uint8_t reserved:5; 132 }; 133 134 /* 135 * The following structure defines an USB endpoint 136 * USB endpoint. 137 */ 138 struct usb_endpoint { 139 /* queue of USB transfers */ 140 struct usb_xfer_queue endpoint_q[USB_MAX_EP_STREAMS]; 141 142 struct usb_endpoint_descriptor *edesc; 143 struct usb_endpoint_ss_comp_descriptor *ecomp; 144 const struct usb_pipe_methods *methods; /* set by HC driver */ 145 146 uint16_t isoc_next; 147 148 uint8_t toggle_next:1; /* next data toggle value */ 149 uint8_t is_stalled:1; /* set if endpoint is stalled */ 150 uint8_t is_synced:1; /* set if we a synchronised */ 151 uint8_t unused:5; 152 uint8_t iface_index; /* not used by "default endpoint" */ 153 154 uint8_t refcount_alloc; /* allocation refcount */ 155 uint8_t refcount_bw; /* bandwidth refcount */ 156 #define USB_EP_REF_MAX 0x3f 157 158 /* High-Speed resource allocation (valid if "refcount_bw" > 0) */ 159 160 uint8_t usb_smask; /* USB start mask */ 161 uint8_t usb_cmask; /* USB complete mask */ 162 uint8_t usb_uframe; /* USB microframe */ 163 164 /* USB endpoint mode, see USB_EP_MODE_XXX */ 165 166 uint8_t ep_mode; 167 }; 168 169 /* 170 * The following structure defines an USB interface. 171 */ 172 struct usb_interface { 173 struct usb_interface_descriptor *idesc; 174 device_t subdev; 175 /* Total number of alternate settings, from 1 to 256 */ 176 uint16_t num_altsetting; 177 /* Current alternate interface index, from 0 to 255 */ 178 uint8_t alt_index; 179 uint8_t parent_iface_index; 180 181 /* Linux compat */ 182 struct usb_host_interface *altsetting; 183 struct usb_host_interface *cur_altsetting; 184 struct usb_device *linux_udev; 185 void *bsd_priv_sc; /* device specific information */ 186 char *pnpinfo; /* additional PnP-info for this interface */ 187 uint8_t bsd_iface_index; 188 }; 189 190 /* 191 * The following structure defines a set of USB transfer flags. 192 */ 193 struct usb_xfer_flags { 194 uint8_t force_short_xfer:1; /* force a short transmit transfer 195 * last */ 196 uint8_t short_xfer_ok:1; /* allow short receive transfers */ 197 uint8_t short_frames_ok:1; /* allow short frames */ 198 uint8_t pipe_bof:1; /* block pipe on failure */ 199 uint8_t proxy_buffer:1; /* makes buffer size a factor of 200 * "max_frame_size" */ 201 uint8_t ext_buffer:1; /* uses external DMA buffer */ 202 uint8_t manual_status:1; /* non automatic status stage on 203 * control transfers */ 204 uint8_t no_pipe_ok:1; /* set if "USB_ERR_NO_PIPE" error can 205 * be ignored */ 206 uint8_t stall_pipe:1; /* set if the endpoint belonging to 207 * this USB transfer should be stalled 208 * before starting this transfer! */ 209 uint8_t pre_scale_frames:1; /* "usb_config->frames" is 210 * assumed to give the 211 * buffering time in 212 * milliseconds and is 213 * converted into the nearest 214 * number of frames when the 215 * USB transfer is setup. This 216 * option only has effect for 217 * ISOCHRONOUS transfers. 218 */ 219 uint8_t send_zlp:1; /* send a zero length packet first */ 220 }; 221 222 /* 223 * The following structure define an USB configuration, that basically 224 * is used when setting up an USB transfer. 225 */ 226 struct usb_config { 227 usb_callback_t *callback; /* USB transfer callback */ 228 usb_frlength_t bufsize; /* total pipe buffer size in bytes */ 229 usb_frcount_t frames; /* maximum number of USB frames */ 230 usb_timeout_t interval; /* interval in milliseconds */ 231 #define USB_DEFAULT_INTERVAL 0 232 usb_timeout_t timeout; /* transfer timeout in milliseconds */ 233 struct usb_xfer_flags flags; /* transfer flags */ 234 usb_stream_t stream_id; /* USB3.0 specific */ 235 enum usb_hc_mode usb_mode; /* host or device mode */ 236 uint8_t type; /* pipe type */ 237 uint8_t endpoint; /* pipe number */ 238 uint8_t direction; /* pipe direction */ 239 uint8_t ep_index; /* pipe index match to use */ 240 uint8_t if_index; /* "ifaces" index to use */ 241 }; 242 243 /* 244 * Use these macro when defining USB device ID arrays if you want to 245 * have your driver module automatically loaded in host, device or 246 * both modes respectively: 247 */ 248 #if USB_HAVE_ID_SECTION 249 #define STRUCT_USB_HOST_ID \ 250 struct usb_device_id __section("usb_host_id") 251 #define STRUCT_USB_DEVICE_ID \ 252 struct usb_device_id __section("usb_device_id") 253 #define STRUCT_USB_DUAL_ID \ 254 struct usb_device_id __section("usb_dual_id") 255 #else 256 #define STRUCT_USB_HOST_ID \ 257 struct usb_device_id 258 #define STRUCT_USB_DEVICE_ID \ 259 struct usb_device_id 260 #define STRUCT_USB_DUAL_ID \ 261 struct usb_device_id 262 #endif /* USB_HAVE_ID_SECTION */ 263 264 /* 265 * The following structure is used when looking up an USB driver for 266 * an USB device. It is inspired by the Linux structure called 267 * "usb_device_id". 268 */ 269 struct usb_device_id { 270 /* Select which fields to match against */ 271 #if BYTE_ORDER == LITTLE_ENDIAN 272 uint16_t 273 match_flag_vendor:1, 274 match_flag_product:1, 275 match_flag_dev_lo:1, 276 match_flag_dev_hi:1, 277 278 match_flag_dev_class:1, 279 match_flag_dev_subclass:1, 280 match_flag_dev_protocol:1, 281 match_flag_int_class:1, 282 283 match_flag_int_subclass:1, 284 match_flag_int_protocol:1, 285 match_flag_unused:6; 286 #else 287 uint16_t 288 match_flag_unused:6, 289 match_flag_int_protocol:1, 290 match_flag_int_subclass:1, 291 292 match_flag_int_class:1, 293 match_flag_dev_protocol:1, 294 match_flag_dev_subclass:1, 295 match_flag_dev_class:1, 296 297 match_flag_dev_hi:1, 298 match_flag_dev_lo:1, 299 match_flag_product:1, 300 match_flag_vendor:1; 301 #endif 302 303 /* Used for product specific matches; the BCD range is inclusive */ 304 uint16_t idVendor; 305 uint16_t idProduct; 306 uint16_t bcdDevice_lo; 307 uint16_t bcdDevice_hi; 308 309 /* Used for device class matches */ 310 uint8_t bDeviceClass; 311 uint8_t bDeviceSubClass; 312 uint8_t bDeviceProtocol; 313 314 /* Used for interface class matches */ 315 uint8_t bInterfaceClass; 316 uint8_t bInterfaceSubClass; 317 uint8_t bInterfaceProtocol; 318 319 #if USB_HAVE_COMPAT_LINUX 320 /* which fields to match against */ 321 uint16_t match_flags; 322 #define USB_DEVICE_ID_MATCH_VENDOR 0x0001 323 #define USB_DEVICE_ID_MATCH_PRODUCT 0x0002 324 #define USB_DEVICE_ID_MATCH_DEV_LO 0x0004 325 #define USB_DEVICE_ID_MATCH_DEV_HI 0x0008 326 #define USB_DEVICE_ID_MATCH_DEV_CLASS 0x0010 327 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS 0x0020 328 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL 0x0040 329 #define USB_DEVICE_ID_MATCH_INT_CLASS 0x0080 330 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS 0x0100 331 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL 0x0200 332 #endif 333 334 /* Hook for driver specific information */ 335 unsigned long driver_info; 336 } __aligned(32); 337 338 #define USB_STD_PNP_INFO "M16:mask;U16:vendor;U16:product;L16:release;G16:release;" \ 339 "U8:devclass;U8:devsubclass;U8:devproto;" \ 340 "U8:intclass;U8:intsubclass;U8:intprotocol;" 341 #define USB_STD_PNP_HOST_INFO USB_STD_PNP_INFO "T:mode=host;" 342 #define USB_STD_PNP_DEVICE_INFO USB_STD_PNP_INFO "T:mode=device;" 343 #define USB_PNP_HOST_INFO(table) \ 344 MODULE_PNP_INFO(USB_STD_PNP_HOST_INFO, uhub, table, table, \ 345 sizeof(table) / sizeof(table[0])) 346 #define USB_PNP_DEVICE_INFO(table) \ 347 MODULE_PNP_INFO(USB_STD_PNP_DEVICE_INFO, uhub, table, table, \ 348 sizeof(table) / sizeof(table[0])) 349 #define USB_PNP_DUAL_INFO(table) \ 350 MODULE_PNP_INFO(USB_STD_PNP_INFO, uhub, table, table, \ 351 sizeof(table) / sizeof(table[0])) 352 353 /* check that the size of the structure above is correct */ 354 extern char usb_device_id_assert[(sizeof(struct usb_device_id) == 32) ? 1 : -1]; 355 356 #define USB_VENDOR(vend) \ 357 .match_flag_vendor = 1, .idVendor = (vend) 358 359 #define USB_PRODUCT(prod) \ 360 .match_flag_product = 1, .idProduct = (prod) 361 362 #define USB_VP(vend,prod) \ 363 USB_VENDOR(vend), USB_PRODUCT(prod) 364 365 #define USB_VPI(vend,prod,info) \ 366 USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info) 367 368 #define USB_DEV_BCD_GTEQ(lo) /* greater than or equal */ \ 369 .match_flag_dev_lo = 1, .bcdDevice_lo = (lo) 370 371 #define USB_DEV_BCD_LTEQ(hi) /* less than or equal */ \ 372 .match_flag_dev_hi = 1, .bcdDevice_hi = (hi) 373 374 #define USB_DEV_CLASS(dc) \ 375 .match_flag_dev_class = 1, .bDeviceClass = (dc) 376 377 #define USB_DEV_SUBCLASS(dsc) \ 378 .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc) 379 380 #define USB_DEV_PROTOCOL(dp) \ 381 .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp) 382 383 #define USB_IFACE_CLASS(ic) \ 384 .match_flag_int_class = 1, .bInterfaceClass = (ic) 385 386 #define USB_IFACE_SUBCLASS(isc) \ 387 .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc) 388 389 #define USB_IFACE_PROTOCOL(ip) \ 390 .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip) 391 392 #define USB_IF_CSI(class,subclass,info) \ 393 USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info) 394 395 #define USB_DRIVER_INFO(n) \ 396 .driver_info = (n) 397 398 #define USB_GET_DRIVER_INFO(did) \ 399 (did)->driver_info 400 401 /* 402 * The following structure keeps information that is used to match 403 * against an array of "usb_device_id" elements. 404 */ 405 struct usbd_lookup_info { 406 uint16_t idVendor; 407 uint16_t idProduct; 408 uint16_t bcdDevice; 409 uint8_t bDeviceClass; 410 uint8_t bDeviceSubClass; 411 uint8_t bDeviceProtocol; 412 uint8_t bInterfaceClass; 413 uint8_t bInterfaceSubClass; 414 uint8_t bInterfaceProtocol; 415 uint8_t bIfaceIndex; 416 uint8_t bIfaceNum; 417 uint8_t bConfigIndex; 418 uint8_t bConfigNum; 419 }; 420 421 /* Structure used by probe and attach */ 422 423 struct usb_attach_arg { 424 struct usbd_lookup_info info; 425 device_t temp_dev; /* for internal use */ 426 unsigned long driver_info; /* for internal use */ 427 void *driver_ivar; 428 struct usb_device *device; /* current device */ 429 struct usb_interface *iface; /* current interface */ 430 enum usb_hc_mode usb_mode; /* host or device mode */ 431 uint8_t port; 432 uint8_t dev_state; 433 #define UAA_DEV_READY 0 434 #define UAA_DEV_DISABLED 1 435 #define UAA_DEV_EJECTING 2 436 }; 437 438 /* 439 * General purpose locking wrappers to ease supporting 440 * USB polled mode: 441 */ 442 #ifdef INVARIANTS 443 #define USB_MTX_ASSERT(_m, _t) do { \ 444 if (!USB_IN_POLLING_MODE_FUNC()) \ 445 mtx_assert(_m, _t); \ 446 } while (0) 447 #else 448 #define USB_MTX_ASSERT(_m, _t) do { } while (0) 449 #endif 450 451 #define USB_MTX_LOCK(_m) do { \ 452 if (!USB_IN_POLLING_MODE_FUNC()) \ 453 mtx_lock(_m); \ 454 } while (0) 455 456 #define USB_MTX_UNLOCK(_m) do { \ 457 if (!USB_IN_POLLING_MODE_FUNC()) \ 458 mtx_unlock(_m); \ 459 } while (0) 460 461 #define USB_MTX_LOCK_SPIN(_m) do { \ 462 if (!USB_IN_POLLING_MODE_FUNC()) \ 463 mtx_lock_spin(_m); \ 464 } while (0) 465 466 #define USB_MTX_UNLOCK_SPIN(_m) do { \ 467 if (!USB_IN_POLLING_MODE_FUNC()) \ 468 mtx_unlock_spin(_m); \ 469 } while (0) 470 471 /* 472 * The following is a wrapper for the callout structure to ease 473 * porting the code to other platforms. 474 */ 475 struct usb_callout { 476 struct callout co; 477 }; 478 #define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f) 479 #define usb_callout_reset(c,...) do { \ 480 if (!USB_IN_POLLING_MODE_FUNC()) \ 481 callout_reset(&(c)->co, __VA_ARGS__); \ 482 } while (0) 483 #define usb_callout_reset_sbt(c,...) do { \ 484 if (!USB_IN_POLLING_MODE_FUNC()) \ 485 callout_reset_sbt(&(c)->co, __VA_ARGS__); \ 486 } while (0) 487 #define usb_callout_stop(c) do { \ 488 if (!USB_IN_POLLING_MODE_FUNC()) { \ 489 callout_stop(&(c)->co); \ 490 } else { \ 491 /* \ 492 * Cannot stop callout when \ 493 * polling. Set dummy callback \ 494 * function instead: \ 495 */ \ 496 (c)->co.c_func = &usbd_dummy_timeout; \ 497 } \ 498 } while (0) 499 #define usb_callout_drain(c) callout_drain(&(c)->co) 500 #define usb_callout_pending(c) callout_pending(&(c)->co) 501 502 /* USB transfer states */ 503 504 #define USB_ST_SETUP 0 505 #define USB_ST_TRANSFERRED 1 506 #define USB_ST_ERROR 2 507 508 /* USB handle request states */ 509 #define USB_HR_NOT_COMPLETE 0 510 #define USB_HR_COMPLETE_OK 1 511 #define USB_HR_COMPLETE_ERR 2 512 513 /* 514 * The following macro will return the current state of an USB 515 * transfer like defined by the "USB_ST_XXX" enums. 516 */ 517 #define USB_GET_STATE(xfer) (usbd_xfer_state(xfer)) 518 519 /* 520 * The following structure defines the USB process message header. 521 */ 522 struct usb_proc_msg { 523 TAILQ_ENTRY(usb_proc_msg) pm_qentry; 524 usb_proc_callback_t *pm_callback; 525 usb_size_t pm_num; 526 }; 527 528 #define USB_FIFO_TX 0 529 #define USB_FIFO_RX 1 530 531 /* 532 * Locking note for the following functions. All the 533 * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called 534 * locked. The others are called unlocked. 535 */ 536 struct usb_fifo_methods { 537 usb_fifo_open_t *f_open; 538 usb_fifo_close_t *f_close; 539 usb_fifo_ioctl_t *f_ioctl; 540 /* 541 * NOTE: The post-ioctl callback is called after the USB reference 542 * gets locked in the IOCTL handler: 543 */ 544 usb_fifo_ioctl_t *f_ioctl_post; 545 usb_fifo_cmd_t *f_start_read; 546 usb_fifo_cmd_t *f_stop_read; 547 usb_fifo_cmd_t *f_start_write; 548 usb_fifo_cmd_t *f_stop_write; 549 usb_fifo_filter_t *f_filter_read; 550 usb_fifo_filter_t *f_filter_write; 551 const char *basename[4]; 552 const char *postfix[4]; 553 }; 554 555 struct usb_fifo_sc { 556 struct usb_fifo *fp[2]; 557 struct usb_fs_privdata *dev; 558 }; 559 560 const char *usbd_errstr(usb_error_t error); 561 void *usbd_find_descriptor(struct usb_device *udev, void *id, 562 uint8_t iface_index, uint8_t type, uint8_t type_mask, 563 uint8_t subtype, uint8_t subtype_mask); 564 struct usb_config_descriptor *usbd_get_config_descriptor( 565 struct usb_device *udev); 566 struct usb_device_descriptor *usbd_get_device_descriptor( 567 struct usb_device *udev); 568 struct usb_interface *usbd_get_iface(struct usb_device *udev, 569 uint8_t iface_index); 570 struct usb_interface_descriptor *usbd_get_interface_descriptor( 571 struct usb_interface *iface); 572 struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 573 const struct usb_config *setup); 574 struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val); 575 usb_error_t usbd_interface_count(struct usb_device *udev, uint8_t *count); 576 enum usb_hc_mode usbd_get_mode(struct usb_device *udev); 577 enum usb_dev_speed usbd_get_speed(struct usb_device *udev); 578 void device_set_usb_desc(device_t dev); 579 void usb_pause_mtx(struct mtx *mtx, int _ticks); 580 usb_error_t usbd_set_pnpinfo(struct usb_device *udev, 581 uint8_t iface_index, const char *pnpinfo); 582 usb_error_t usbd_add_dynamic_quirk(struct usb_device *udev, 583 uint16_t quirk); 584 usb_error_t usbd_set_endpoint_mode(struct usb_device *udev, 585 struct usb_endpoint *ep, uint8_t ep_mode); 586 uint8_t usbd_get_endpoint_mode(struct usb_device *udev, 587 struct usb_endpoint *ep); 588 589 const struct usb_device_id *usbd_lookup_id_by_info( 590 const struct usb_device_id *id, usb_size_t sizeof_id, 591 const struct usbd_lookup_info *info); 592 int usbd_lookup_id_by_uaa(const struct usb_device_id *id, 593 usb_size_t sizeof_id, struct usb_attach_arg *uaa); 594 595 usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, 596 struct usb_device_request *req, void *data, uint16_t flags, 597 uint16_t *actlen, usb_timeout_t timeout); 598 #define usbd_do_request(u,m,r,d) \ 599 usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT) 600 601 uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1, 602 struct usb_xfer *xfer2); 603 uint8_t usbd_get_interface_altindex(struct usb_interface *iface); 604 usb_error_t usbd_set_alt_interface_index(struct usb_device *udev, 605 uint8_t iface_index, uint8_t alt_index); 606 uint32_t usbd_get_isoc_fps(struct usb_device *udev); 607 uint32_t usbd_get_max_frame_length(const struct usb_endpoint_descriptor *, 608 const struct usb_endpoint_ss_comp_descriptor *, 609 enum usb_dev_speed); 610 usb_error_t usbd_transfer_setup(struct usb_device *udev, 611 const uint8_t *ifaces, struct usb_xfer **pxfer, 612 const struct usb_config *setup_start, uint16_t n_setup, 613 void *priv_sc, struct mtx *priv_mtx); 614 void usbd_transfer_submit(struct usb_xfer *xfer); 615 void usbd_transfer_clear_stall(struct usb_xfer *xfer); 616 void usbd_transfer_drain(struct usb_xfer *xfer); 617 uint8_t usbd_transfer_pending(struct usb_xfer *xfer); 618 void usbd_transfer_start(struct usb_xfer *xfer); 619 void usbd_transfer_stop(struct usb_xfer *xfer); 620 void usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup); 621 void usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max); 622 void usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 623 uint8_t parent_index); 624 uint8_t usbd_get_bus_index(struct usb_device *udev); 625 uint8_t usbd_get_device_index(struct usb_device *udev); 626 void usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode); 627 uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode); 628 uint8_t usbd_device_attached(struct usb_device *udev); 629 630 usb_frlength_t 631 usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex); 632 void usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen, 633 int *aframes, int *nframes); 634 struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *, usb_frcount_t); 635 void *usbd_xfer_get_frame_buffer(struct usb_xfer *, usb_frcount_t); 636 void *usbd_xfer_softc(struct usb_xfer *xfer); 637 void *usbd_xfer_get_priv(struct usb_xfer *xfer); 638 void usbd_xfer_set_priv(struct usb_xfer *xfer, void *); 639 void usbd_xfer_set_interval(struct usb_xfer *xfer, int); 640 uint8_t usbd_xfer_state(struct usb_xfer *xfer); 641 void usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 642 void *ptr, usb_frlength_t len); 643 void usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex, 644 void **ptr, int *len); 645 void usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset, 646 usb_frcount_t frindex); 647 usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer); 648 usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer); 649 usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer); 650 uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer); 651 usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer, 652 usb_frcount_t frindex); 653 void usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex, 654 usb_frlength_t len); 655 void usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout); 656 void usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n); 657 void usbd_xfer_set_zlp(struct usb_xfer *xfer); 658 uint8_t usbd_xfer_get_and_clr_zlp(struct usb_xfer *xfer); 659 void usbd_xfer_set_stall(struct usb_xfer *xfer); 660 int usbd_xfer_is_stalled(struct usb_xfer *xfer); 661 void usbd_xfer_set_flag(struct usb_xfer *xfer, int flag); 662 void usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag); 663 uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer); 664 uint8_t usbd_xfer_maxp_was_clamped(struct usb_xfer *xfer); 665 666 void usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset, 667 const void *ptr, usb_frlength_t len); 668 int usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset, 669 const void *ptr, usb_frlength_t len); 670 void usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset, 671 void *ptr, usb_frlength_t len); 672 int usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset, 673 void *ptr, usb_frlength_t len); 674 void usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset, 675 struct usb_page_search *res); 676 void usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset, 677 struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len); 678 void usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset, 679 usb_frlength_t len); 680 void usbd_start_re_enumerate(struct usb_device *udev); 681 usb_error_t 682 usbd_start_set_config(struct usb_device *, uint8_t); 683 int usbd_in_polling_mode(void); 684 void usbd_dummy_timeout(void *); 685 686 int usb_fifo_attach(struct usb_device *udev, void *priv_sc, 687 struct mtx *priv_mtx, struct usb_fifo_methods *pm, 688 struct usb_fifo_sc *f_sc, uint16_t unit, int16_t subunit, 689 uint8_t iface_index, uid_t uid, gid_t gid, int mode); 690 void usb_fifo_detach(struct usb_fifo_sc *f_sc); 691 int usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize, 692 uint16_t nbuf); 693 void usb_fifo_free_buffer(struct usb_fifo *f); 694 uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo); 695 void usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc, 696 usb_frlength_t offset, usb_frlength_t len, uint8_t what); 697 void usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr, 698 usb_size_t len, uint8_t what); 699 uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len); 700 void usb_fifo_put_data_error(struct usb_fifo *fifo); 701 uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc, 702 usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen, 703 uint8_t what); 704 uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr, 705 usb_size_t len, usb_size_t *actlen, uint8_t what); 706 uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr, 707 usb_size_t *plen); 708 void usb_fifo_reset(struct usb_fifo *f); 709 void usb_fifo_wakeup(struct usb_fifo *f); 710 void usb_fifo_get_data_error(struct usb_fifo *fifo); 711 void *usb_fifo_softc(struct usb_fifo *fifo); 712 void usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t); 713 void usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t); 714 void usb_fifo_free(struct usb_fifo *f); 715 #endif /* _KERNEL || _STANDALONE */ 716 #endif /* _USB_USBDI_H_ */ 717