1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 5 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 6 * Copyright (c) 2008-2020 Hans Petter Selasky. All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 #ifdef USB_GLOBAL_INCLUDE_FILE 31 #include USB_GLOBAL_INCLUDE_FILE 32 #else 33 #include <sys/stdint.h> 34 #include <sys/stddef.h> 35 #include <sys/param.h> 36 #include <sys/queue.h> 37 #include <sys/types.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/module.h> 42 #include <sys/lock.h> 43 #include <sys/mutex.h> 44 #include <sys/condvar.h> 45 #include <sys/sysctl.h> 46 #include <sys/sx.h> 47 #include <sys/unistd.h> 48 #include <sys/callout.h> 49 #include <sys/malloc.h> 50 #include <sys/priv.h> 51 52 #include <dev/usb/usb.h> 53 #include <dev/usb/usbdi.h> 54 #include <dev/usb/usbdi_util.h> 55 #include <dev/usb/usbhid.h> 56 57 #define USB_DEBUG_VAR usb_debug 58 59 #include <dev/usb/usb_core.h> 60 #include <dev/usb/usb_busdma.h> 61 #include <dev/usb/usb_request.h> 62 #include <dev/usb/usb_process.h> 63 #include <dev/usb/usb_transfer.h> 64 #include <dev/usb/usb_debug.h> 65 #include <dev/usb/usb_device.h> 66 #include <dev/usb/usb_util.h> 67 #include <dev/usb/usb_dynamic.h> 68 69 #include <dev/usb/usb_controller.h> 70 #include <dev/usb/usb_bus.h> 71 #include <sys/ctype.h> 72 #endif /* USB_GLOBAL_INCLUDE_FILE */ 73 74 static int usb_no_cs_fail; 75 76 SYSCTL_INT(_hw_usb, OID_AUTO, no_cs_fail, CTLFLAG_RWTUN, 77 &usb_no_cs_fail, 0, "USB clear stall failures are ignored, if set"); 78 79 static int usb_full_ddesc; 80 81 SYSCTL_INT(_hw_usb, OID_AUTO, full_ddesc, CTLFLAG_RWTUN, 82 &usb_full_ddesc, 0, "USB always read complete device descriptor, if set"); 83 84 #ifdef USB_DEBUG 85 #ifdef USB_REQ_DEBUG 86 /* The following structures are used in connection to fault injection. */ 87 struct usb_ctrl_debug { 88 int bus_index; /* target bus */ 89 int dev_index; /* target address */ 90 int ds_fail; /* fail data stage */ 91 int ss_fail; /* fail status stage */ 92 int ds_delay; /* data stage delay in ms */ 93 int ss_delay; /* status stage delay in ms */ 94 int bmRequestType_value; 95 int bRequest_value; 96 }; 97 98 struct usb_ctrl_debug_bits { 99 uint16_t ds_delay; 100 uint16_t ss_delay; 101 uint8_t ds_fail:1; 102 uint8_t ss_fail:1; 103 uint8_t enabled:1; 104 }; 105 106 /* The default is to disable fault injection. */ 107 108 static struct usb_ctrl_debug usb_ctrl_debug = { 109 .bus_index = -1, 110 .dev_index = -1, 111 .bmRequestType_value = -1, 112 .bRequest_value = -1, 113 }; 114 115 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_bus_fail, CTLFLAG_RWTUN, 116 &usb_ctrl_debug.bus_index, 0, "USB controller index to fail"); 117 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_dev_fail, CTLFLAG_RWTUN, 118 &usb_ctrl_debug.dev_index, 0, "USB device address to fail"); 119 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_fail, CTLFLAG_RWTUN, 120 &usb_ctrl_debug.ds_fail, 0, "USB fail data stage"); 121 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_fail, CTLFLAG_RWTUN, 122 &usb_ctrl_debug.ss_fail, 0, "USB fail status stage"); 123 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ds_delay, CTLFLAG_RWTUN, 124 &usb_ctrl_debug.ds_delay, 0, "USB data stage delay in ms"); 125 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_ss_delay, CTLFLAG_RWTUN, 126 &usb_ctrl_debug.ss_delay, 0, "USB status stage delay in ms"); 127 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rt_fail, CTLFLAG_RWTUN, 128 &usb_ctrl_debug.bmRequestType_value, 0, "USB bmRequestType to fail"); 129 SYSCTL_INT(_hw_usb, OID_AUTO, ctrl_rv_fail, CTLFLAG_RWTUN, 130 &usb_ctrl_debug.bRequest_value, 0, "USB bRequest to fail"); 131 132 /*------------------------------------------------------------------------* 133 * usbd_get_debug_bits 134 * 135 * This function is only useful in USB host mode. 136 *------------------------------------------------------------------------*/ 137 static void 138 usbd_get_debug_bits(struct usb_device *udev, struct usb_device_request *req, 139 struct usb_ctrl_debug_bits *dbg) 140 { 141 int temp; 142 143 memset(dbg, 0, sizeof(*dbg)); 144 145 /* Compute data stage delay */ 146 147 temp = usb_ctrl_debug.ds_delay; 148 if (temp < 0) 149 temp = 0; 150 else if (temp > (16*1024)) 151 temp = (16*1024); 152 153 dbg->ds_delay = temp; 154 155 /* Compute status stage delay */ 156 157 temp = usb_ctrl_debug.ss_delay; 158 if (temp < 0) 159 temp = 0; 160 else if (temp > (16*1024)) 161 temp = (16*1024); 162 163 dbg->ss_delay = temp; 164 165 /* Check if this control request should be failed */ 166 167 if (usbd_get_bus_index(udev) != usb_ctrl_debug.bus_index) 168 return; 169 170 if (usbd_get_device_index(udev) != usb_ctrl_debug.dev_index) 171 return; 172 173 temp = usb_ctrl_debug.bmRequestType_value; 174 175 if ((temp != req->bmRequestType) && (temp >= 0) && (temp <= 255)) 176 return; 177 178 temp = usb_ctrl_debug.bRequest_value; 179 180 if ((temp != req->bRequest) && (temp >= 0) && (temp <= 255)) 181 return; 182 183 temp = usb_ctrl_debug.ds_fail; 184 if (temp) 185 dbg->ds_fail = 1; 186 187 temp = usb_ctrl_debug.ss_fail; 188 if (temp) 189 dbg->ss_fail = 1; 190 191 dbg->enabled = 1; 192 } 193 #endif /* USB_REQ_DEBUG */ 194 #endif /* USB_DEBUG */ 195 196 /*------------------------------------------------------------------------* 197 * usbd_do_request_callback 198 * 199 * This function is the USB callback for generic USB Host control 200 * transfers. 201 *------------------------------------------------------------------------*/ 202 void 203 usbd_do_request_callback(struct usb_xfer *xfer, usb_error_t error) 204 { 205 ; /* workaround for a bug in "indent" */ 206 207 DPRINTF("st=%u\n", USB_GET_STATE(xfer)); 208 209 switch (USB_GET_STATE(xfer)) { 210 case USB_ST_SETUP: 211 usbd_transfer_submit(xfer); 212 break; 213 default: 214 cv_signal(&xfer->xroot->udev->ctrlreq_cv); 215 break; 216 } 217 } 218 219 /*------------------------------------------------------------------------* 220 * usb_do_clear_stall_callback 221 * 222 * This function is the USB callback for generic clear stall requests. 223 *------------------------------------------------------------------------*/ 224 void 225 usb_do_clear_stall_callback(struct usb_xfer *xfer, usb_error_t error) 226 { 227 struct usb_device_request req; 228 struct usb_device *udev; 229 struct usb_endpoint *ep; 230 struct usb_endpoint *ep_end; 231 struct usb_endpoint *ep_first; 232 usb_stream_t x; 233 uint8_t to; 234 235 udev = xfer->xroot->udev; 236 237 USB_BUS_LOCK(udev->bus); 238 239 /* round robin endpoint clear stall */ 240 241 ep = udev->ep_curr; 242 ep_end = udev->endpoints + udev->endpoints_max; 243 ep_first = udev->endpoints; 244 to = udev->endpoints_max; 245 246 switch (USB_GET_STATE(xfer)) { 247 case USB_ST_TRANSFERRED: 248 tr_transferred: 249 /* reset error counter */ 250 udev->clear_stall_errors = 0; 251 252 if (ep == NULL) 253 goto tr_setup; /* device was unconfigured */ 254 if (ep->edesc && 255 ep->is_stalled) { 256 ep->toggle_next = 0; 257 ep->is_stalled = 0; 258 /* some hardware needs a callback to clear the data toggle */ 259 usbd_clear_stall_locked(udev, ep); 260 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 261 /* start the current or next transfer, if any */ 262 usb_command_wrapper(&ep->endpoint_q[x], 263 ep->endpoint_q[x].curr); 264 } 265 } 266 ep++; 267 268 case USB_ST_SETUP: 269 tr_setup: 270 if (to == 0) 271 break; /* no endpoints - nothing to do */ 272 if ((ep < ep_first) || (ep >= ep_end)) 273 ep = ep_first; /* endpoint wrapped around */ 274 if (ep->edesc && 275 ep->is_stalled) { 276 /* setup a clear-stall packet */ 277 278 req.bmRequestType = UT_WRITE_ENDPOINT; 279 req.bRequest = UR_CLEAR_FEATURE; 280 USETW(req.wValue, UF_ENDPOINT_HALT); 281 req.wIndex[0] = ep->edesc->bEndpointAddress; 282 req.wIndex[1] = 0; 283 USETW(req.wLength, 0); 284 285 /* copy in the transfer */ 286 287 usbd_copy_in(xfer->frbuffers, 0, &req, sizeof(req)); 288 289 /* set length */ 290 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 291 xfer->nframes = 1; 292 USB_BUS_UNLOCK(udev->bus); 293 294 usbd_transfer_submit(xfer); 295 296 USB_BUS_LOCK(udev->bus); 297 break; 298 } 299 ep++; 300 to--; 301 goto tr_setup; 302 303 default: 304 if (error == USB_ERR_CANCELLED) 305 break; 306 307 DPRINTF("Clear stall failed.\n"); 308 309 /* 310 * Some VMs like VirtualBox always return failure on 311 * clear-stall which we sometimes should just ignore. 312 */ 313 if (usb_no_cs_fail) 314 goto tr_transferred; 315 316 /* 317 * Some non-compliant USB devices do not implement the 318 * clear endpoint halt feature. Silently ignore such 319 * devices, when they at least respond correctly 320 * passing up a valid STALL PID packet. 321 */ 322 if (error == USB_ERR_STALLED) 323 goto tr_transferred; 324 325 if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) 326 goto tr_setup; 327 328 if (error == USB_ERR_TIMEOUT) { 329 udev->clear_stall_errors = USB_CS_RESET_LIMIT; 330 DPRINTF("Trying to re-enumerate.\n"); 331 usbd_start_re_enumerate(udev); 332 } else { 333 udev->clear_stall_errors++; 334 if (udev->clear_stall_errors == USB_CS_RESET_LIMIT) { 335 DPRINTF("Trying to re-enumerate.\n"); 336 usbd_start_re_enumerate(udev); 337 } 338 } 339 goto tr_setup; 340 } 341 342 /* store current endpoint */ 343 udev->ep_curr = ep; 344 USB_BUS_UNLOCK(udev->bus); 345 } 346 347 static usb_handle_req_t * 348 usbd_get_hr_func(struct usb_device *udev) 349 { 350 /* figure out if there is a Handle Request function */ 351 if (udev->flags.usb_mode == USB_MODE_DEVICE) 352 return (usb_temp_get_desc_p); 353 else if (udev->parent_hub == NULL) 354 return (udev->bus->methods->roothub_exec); 355 else 356 return (NULL); 357 } 358 359 /*------------------------------------------------------------------------* 360 * usbd_do_request_flags and usbd_do_request 361 * 362 * Description of arguments passed to these functions: 363 * 364 * "udev" - this is the "usb_device" structure pointer on which the 365 * request should be performed. It is possible to call this function 366 * in both Host Side mode and Device Side mode. 367 * 368 * "mtx" - if this argument is non-NULL the mutex pointed to by it 369 * will get dropped and picked up during the execution of this 370 * function, hence this function sometimes needs to sleep. If this 371 * argument is NULL it has no effect. 372 * 373 * "req" - this argument must always be non-NULL and points to an 374 * 8-byte structure holding the USB request to be done. The USB 375 * request structure has a bit telling the direction of the USB 376 * request, if it is a read or a write. 377 * 378 * "data" - if the "wLength" part of the structure pointed to by "req" 379 * is non-zero this argument must point to a valid kernel buffer which 380 * can hold at least "wLength" bytes. If "wLength" is zero "data" can 381 * be NULL. 382 * 383 * "flags" - here is a list of valid flags: 384 * 385 * o USB_SHORT_XFER_OK: allows the data transfer to be shorter than 386 * specified 387 * 388 * o USB_DELAY_STATUS_STAGE: allows the status stage to be performed 389 * at a later point in time. This is tunable by the "hw.usb.ss_delay" 390 * sysctl. This flag is mostly useful for debugging. 391 * 392 * o USB_USER_DATA_PTR: treat the "data" pointer like a userland 393 * pointer. 394 * 395 * "actlen" - if non-NULL the actual transfer length will be stored in 396 * the 16-bit unsigned integer pointed to by "actlen". This 397 * information is mostly useful when the "USB_SHORT_XFER_OK" flag is 398 * used. 399 * 400 * "timeout" - gives the timeout for the control transfer in 401 * milliseconds. A "timeout" value less than 50 milliseconds is 402 * treated like a 50 millisecond timeout. A "timeout" value greater 403 * than 30 seconds is treated like a 30 second timeout. This USB stack 404 * does not allow control requests without a timeout. 405 * 406 * NOTE: This function is thread safe. All calls to "usbd_do_request_flags" 407 * will be serialized by the use of the USB device enumeration lock. 408 * 409 * Returns: 410 * 0: Success 411 * Else: Failure 412 *------------------------------------------------------------------------*/ 413 usb_error_t 414 usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx, 415 struct usb_device_request *req, void *data, uint16_t flags, 416 uint16_t *actlen, usb_timeout_t timeout) 417 { 418 #ifdef USB_REQ_DEBUG 419 struct usb_ctrl_debug_bits dbg; 420 #endif 421 usb_handle_req_t *hr_func; 422 struct usb_xfer *xfer; 423 const void *desc; 424 int err = 0; 425 usb_ticks_t start_ticks; 426 usb_ticks_t delta_ticks; 427 usb_ticks_t max_ticks; 428 uint16_t length; 429 uint16_t temp; 430 uint16_t acttemp; 431 uint8_t do_unlock; 432 433 if (timeout < 50) { 434 /* timeout is too small */ 435 timeout = 50; 436 } 437 if (timeout > 30000) { 438 /* timeout is too big */ 439 timeout = 30000; 440 } 441 length = UGETW(req->wLength); 442 443 DPRINTFN(5, "udev=%p bmRequestType=0x%02x bRequest=0x%02x " 444 "wValue=0x%02x%02x wIndex=0x%02x%02x wLength=0x%02x%02x\n", 445 udev, req->bmRequestType, req->bRequest, 446 req->wValue[1], req->wValue[0], 447 req->wIndex[1], req->wIndex[0], 448 req->wLength[1], req->wLength[0]); 449 450 /* Check if the device is still alive */ 451 if (udev->state < USB_STATE_POWERED) { 452 DPRINTF("usb device has gone\n"); 453 return (USB_ERR_NOT_CONFIGURED); 454 } 455 456 /* 457 * Set "actlen" to a known value in case the caller does not 458 * check the return value: 459 */ 460 if (actlen) 461 *actlen = 0; 462 463 #if (USB_HAVE_USER_IO == 0) 464 if (flags & USB_USER_DATA_PTR) 465 return (USB_ERR_INVAL); 466 #endif 467 if ((mtx != NULL) && (mtx != &Giant)) { 468 USB_MTX_UNLOCK(mtx); 469 USB_MTX_ASSERT(mtx, MA_NOTOWNED); 470 } 471 472 /* 473 * Serialize access to this function: 474 */ 475 do_unlock = usbd_ctrl_lock(udev); 476 477 hr_func = usbd_get_hr_func(udev); 478 479 if (hr_func != NULL) { 480 DPRINTF("Handle Request function is set\n"); 481 482 desc = NULL; 483 temp = 0; 484 485 if (!(req->bmRequestType & UT_READ)) { 486 if (length != 0) { 487 DPRINTFN(1, "The handle request function " 488 "does not support writing data!\n"); 489 err = USB_ERR_INVAL; 490 goto done; 491 } 492 } 493 494 /* The root HUB code needs the BUS lock locked */ 495 496 USB_BUS_LOCK(udev->bus); 497 err = (hr_func) (udev, req, &desc, &temp); 498 USB_BUS_UNLOCK(udev->bus); 499 500 if (err) 501 goto done; 502 503 if (length > temp) { 504 if (!(flags & USB_SHORT_XFER_OK)) { 505 err = USB_ERR_SHORT_XFER; 506 goto done; 507 } 508 length = temp; 509 } 510 if (actlen) 511 *actlen = length; 512 513 if (length > 0) { 514 #if USB_HAVE_USER_IO 515 if (flags & USB_USER_DATA_PTR) { 516 if (copyout(desc, data, length)) { 517 err = USB_ERR_INVAL; 518 goto done; 519 } 520 } else 521 #endif 522 memcpy(data, desc, length); 523 } 524 goto done; /* success */ 525 } 526 527 /* 528 * Setup a new USB transfer or use the existing one, if any: 529 */ 530 usbd_ctrl_transfer_setup(udev); 531 532 xfer = udev->ctrl_xfer[0]; 533 if (xfer == NULL) { 534 /* most likely out of memory */ 535 err = USB_ERR_NOMEM; 536 goto done; 537 } 538 539 #ifdef USB_REQ_DEBUG 540 /* Get debug bits */ 541 usbd_get_debug_bits(udev, req, &dbg); 542 543 /* Check for fault injection */ 544 if (dbg.enabled) 545 flags |= USB_DELAY_STATUS_STAGE; 546 #endif 547 USB_XFER_LOCK(xfer); 548 549 if (flags & USB_DELAY_STATUS_STAGE) 550 xfer->flags.manual_status = 1; 551 else 552 xfer->flags.manual_status = 0; 553 554 if (flags & USB_SHORT_XFER_OK) 555 xfer->flags.short_xfer_ok = 1; 556 else 557 xfer->flags.short_xfer_ok = 0; 558 559 xfer->timeout = timeout; 560 561 start_ticks = ticks; 562 563 max_ticks = USB_MS_TO_TICKS(timeout); 564 565 usbd_copy_in(xfer->frbuffers, 0, req, sizeof(*req)); 566 567 usbd_xfer_set_frame_len(xfer, 0, sizeof(*req)); 568 569 while (1) { 570 temp = length; 571 if (temp > usbd_xfer_max_len(xfer)) { 572 temp = usbd_xfer_max_len(xfer); 573 } 574 #ifdef USB_REQ_DEBUG 575 if (xfer->flags.manual_status) { 576 if (usbd_xfer_frame_len(xfer, 0) != 0) { 577 /* Execute data stage separately */ 578 temp = 0; 579 } else if (temp > 0) { 580 if (dbg.ds_fail) { 581 err = USB_ERR_INVAL; 582 break; 583 } 584 if (dbg.ds_delay > 0) { 585 usb_pause_mtx( 586 xfer->xroot->xfer_mtx, 587 USB_MS_TO_TICKS(dbg.ds_delay)); 588 /* make sure we don't time out */ 589 start_ticks = ticks; 590 } 591 } 592 } 593 #endif 594 usbd_xfer_set_frame_len(xfer, 1, temp); 595 596 if (temp > 0) { 597 if (!(req->bmRequestType & UT_READ)) { 598 #if USB_HAVE_USER_IO 599 if (flags & USB_USER_DATA_PTR) { 600 USB_XFER_UNLOCK(xfer); 601 err = usbd_copy_in_user(xfer->frbuffers + 1, 602 0, data, temp); 603 USB_XFER_LOCK(xfer); 604 if (err) { 605 err = USB_ERR_INVAL; 606 break; 607 } 608 } else 609 #endif 610 usbd_copy_in(xfer->frbuffers + 1, 611 0, data, temp); 612 } 613 usbd_xfer_set_frames(xfer, 2); 614 } else { 615 if (usbd_xfer_frame_len(xfer, 0) == 0) { 616 if (xfer->flags.manual_status) { 617 #ifdef USB_REQ_DEBUG 618 if (dbg.ss_fail) { 619 err = USB_ERR_INVAL; 620 break; 621 } 622 if (dbg.ss_delay > 0) { 623 usb_pause_mtx( 624 xfer->xroot->xfer_mtx, 625 USB_MS_TO_TICKS(dbg.ss_delay)); 626 /* make sure we don't time out */ 627 start_ticks = ticks; 628 } 629 #endif 630 xfer->flags.manual_status = 0; 631 } else { 632 break; 633 } 634 } 635 usbd_xfer_set_frames(xfer, 1); 636 } 637 638 usbd_transfer_start(xfer); 639 640 while (usbd_transfer_pending(xfer)) { 641 cv_wait(&udev->ctrlreq_cv, 642 xfer->xroot->xfer_mtx); 643 } 644 645 err = xfer->error; 646 647 if (err) { 648 break; 649 } 650 651 /* get actual length of DATA stage */ 652 653 if (xfer->aframes < 2) { 654 acttemp = 0; 655 } else { 656 acttemp = usbd_xfer_frame_len(xfer, 1); 657 } 658 659 /* check for short packet */ 660 661 if (temp > acttemp) { 662 temp = acttemp; 663 length = temp; 664 } 665 if (temp > 0) { 666 if (req->bmRequestType & UT_READ) { 667 #if USB_HAVE_USER_IO 668 if (flags & USB_USER_DATA_PTR) { 669 USB_XFER_UNLOCK(xfer); 670 err = usbd_copy_out_user(xfer->frbuffers + 1, 671 0, data, temp); 672 USB_XFER_LOCK(xfer); 673 if (err) { 674 err = USB_ERR_INVAL; 675 break; 676 } 677 } else 678 #endif 679 usbd_copy_out(xfer->frbuffers + 1, 680 0, data, temp); 681 } 682 } 683 /* 684 * Clear "frlengths[0]" so that we don't send the setup 685 * packet again: 686 */ 687 usbd_xfer_set_frame_len(xfer, 0, 0); 688 689 /* update length and data pointer */ 690 length -= temp; 691 data = USB_ADD_BYTES(data, temp); 692 693 if (actlen) { 694 (*actlen) += temp; 695 } 696 /* check for timeout */ 697 698 delta_ticks = ticks - start_ticks; 699 if (delta_ticks > max_ticks) { 700 if (!err) { 701 err = USB_ERR_TIMEOUT; 702 } 703 } 704 if (err) { 705 break; 706 } 707 } 708 709 if (err) { 710 /* 711 * Make sure that the control endpoint is no longer 712 * blocked in case of a non-transfer related error: 713 */ 714 usbd_transfer_stop(xfer); 715 } 716 USB_XFER_UNLOCK(xfer); 717 718 done: 719 if (do_unlock) 720 usbd_ctrl_unlock(udev); 721 722 if ((mtx != NULL) && (mtx != &Giant)) 723 USB_MTX_LOCK(mtx); 724 725 switch (err) { 726 case USB_ERR_NORMAL_COMPLETION: 727 case USB_ERR_SHORT_XFER: 728 case USB_ERR_STALLED: 729 case USB_ERR_CANCELLED: 730 break; 731 default: 732 DPRINTF("error=%s - waiting a bit for TT cleanup\n", 733 usbd_errstr(err)); 734 usb_pause_mtx(mtx, hz / 16); 735 break; 736 } 737 return ((usb_error_t)err); 738 } 739 740 /*------------------------------------------------------------------------* 741 * usbd_do_request_proc - factored out code 742 * 743 * This function is factored out code. It does basically the same like 744 * usbd_do_request_flags, except it will check the status of the 745 * passed process argument before doing the USB request. If the 746 * process is draining the USB_ERR_IOERROR code will be returned. It 747 * is assumed that the mutex associated with the process is locked 748 * when calling this function. 749 *------------------------------------------------------------------------*/ 750 usb_error_t 751 usbd_do_request_proc(struct usb_device *udev, struct usb_process *pproc, 752 struct usb_device_request *req, void *data, uint16_t flags, 753 uint16_t *actlen, usb_timeout_t timeout) 754 { 755 usb_error_t err; 756 uint16_t len; 757 758 /* get request data length */ 759 len = UGETW(req->wLength); 760 761 /* check if the device is being detached */ 762 if (usb_proc_is_gone(pproc)) { 763 err = USB_ERR_IOERROR; 764 goto done; 765 } 766 767 /* forward the USB request */ 768 err = usbd_do_request_flags(udev, pproc->up_mtx, 769 req, data, flags, actlen, timeout); 770 771 done: 772 /* on failure we zero the data */ 773 /* on short packet we zero the unused data */ 774 if ((len != 0) && (req->bmRequestType & UE_DIR_IN)) { 775 if (err) 776 memset(data, 0, len); 777 else if (actlen && *actlen != len) 778 memset(((uint8_t *)data) + *actlen, 0, len - *actlen); 779 } 780 return (err); 781 } 782 783 /*------------------------------------------------------------------------* 784 * usbd_req_reset_port 785 * 786 * This function will instruct a USB HUB to perform a reset sequence 787 * on the specified port number. 788 * 789 * Returns: 790 * 0: Success. The USB device should now be at address zero. 791 * Else: Failure. No USB device is present and the USB port should be 792 * disabled. 793 *------------------------------------------------------------------------*/ 794 usb_error_t 795 usbd_req_reset_port(struct usb_device *udev, struct mtx *mtx, uint8_t port) 796 { 797 struct usb_port_status ps; 798 usb_error_t err; 799 uint16_t n; 800 uint16_t status; 801 uint16_t change; 802 803 DPRINTF("\n"); 804 805 /* clear any leftover port reset changes first */ 806 usbd_req_clear_port_feature( 807 udev, mtx, port, UHF_C_PORT_RESET); 808 809 /* assert port reset on the given port */ 810 err = usbd_req_set_port_feature( 811 udev, mtx, port, UHF_PORT_RESET); 812 813 /* check for errors */ 814 if (err) 815 goto done; 816 n = 0; 817 while (1) { 818 /* wait for the device to recover from reset */ 819 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); 820 n += usb_port_reset_delay; 821 err = usbd_req_get_port_status(udev, mtx, &ps, port); 822 if (err) 823 goto done; 824 825 status = UGETW(ps.wPortStatus); 826 change = UGETW(ps.wPortChange); 827 828 /* if the device disappeared, just give up */ 829 if (!(status & UPS_CURRENT_CONNECT_STATUS)) 830 goto done; 831 832 /* check if reset is complete */ 833 if (change & UPS_C_PORT_RESET) 834 break; 835 836 /* 837 * Some Virtual Machines like VirtualBox 4.x fail to 838 * generate a port reset change event. Check if reset 839 * is no longer asserted. 840 */ 841 if (!(status & UPS_RESET)) 842 break; 843 844 /* check for timeout */ 845 if (n > 1000) { 846 n = 0; 847 break; 848 } 849 } 850 851 /* clear port reset first */ 852 err = usbd_req_clear_port_feature( 853 udev, mtx, port, UHF_C_PORT_RESET); 854 if (err) 855 goto done; 856 857 /* check for timeout */ 858 if (n == 0) { 859 err = USB_ERR_TIMEOUT; 860 goto done; 861 } 862 /* wait for the device to recover from reset */ 863 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); 864 865 done: 866 DPRINTFN(2, "port %d reset returning error=%s\n", 867 port, usbd_errstr(err)); 868 return (err); 869 } 870 871 /*------------------------------------------------------------------------* 872 * usbd_req_warm_reset_port 873 * 874 * This function will instruct an USB HUB to perform a warm reset 875 * sequence on the specified port number. This kind of reset is not 876 * mandatory for LOW-, FULL- and HIGH-speed USB HUBs and is targeted 877 * for SUPER-speed USB HUBs. 878 * 879 * Returns: 880 * 0: Success. The USB device should now be available again. 881 * Else: Failure. No USB device is present and the USB port should be 882 * disabled. 883 *------------------------------------------------------------------------*/ 884 usb_error_t 885 usbd_req_warm_reset_port(struct usb_device *udev, struct mtx *mtx, 886 uint8_t port) 887 { 888 struct usb_port_status ps; 889 usb_error_t err; 890 uint16_t n; 891 uint16_t status; 892 uint16_t change; 893 894 DPRINTF("\n"); 895 896 err = usbd_req_get_port_status(udev, mtx, &ps, port); 897 if (err) 898 goto done; 899 900 status = UGETW(ps.wPortStatus); 901 902 switch (UPS_PORT_LINK_STATE_GET(status)) { 903 case UPS_PORT_LS_U3: 904 case UPS_PORT_LS_COMP_MODE: 905 case UPS_PORT_LS_LOOPBACK: 906 case UPS_PORT_LS_SS_INA: 907 break; 908 default: 909 DPRINTF("Wrong state for warm reset\n"); 910 return (0); 911 } 912 913 /* clear any leftover warm port reset changes first */ 914 usbd_req_clear_port_feature(udev, mtx, 915 port, UHF_C_BH_PORT_RESET); 916 917 /* set warm port reset */ 918 err = usbd_req_set_port_feature(udev, mtx, 919 port, UHF_BH_PORT_RESET); 920 if (err) 921 goto done; 922 923 n = 0; 924 while (1) { 925 /* wait for the device to recover from reset */ 926 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_delay)); 927 n += usb_port_reset_delay; 928 err = usbd_req_get_port_status(udev, mtx, &ps, port); 929 if (err) 930 goto done; 931 932 status = UGETW(ps.wPortStatus); 933 change = UGETW(ps.wPortChange); 934 935 /* if the device disappeared, just give up */ 936 if (!(status & UPS_CURRENT_CONNECT_STATUS)) 937 goto done; 938 939 /* check if reset is complete */ 940 if (change & UPS_C_BH_PORT_RESET) 941 break; 942 943 /* check for timeout */ 944 if (n > 1000) { 945 n = 0; 946 break; 947 } 948 } 949 950 /* clear port reset first */ 951 err = usbd_req_clear_port_feature( 952 udev, mtx, port, UHF_C_BH_PORT_RESET); 953 if (err) 954 goto done; 955 956 /* check for timeout */ 957 if (n == 0) { 958 err = USB_ERR_TIMEOUT; 959 goto done; 960 } 961 /* wait for the device to recover from reset */ 962 usb_pause_mtx(mtx, USB_MS_TO_TICKS(usb_port_reset_recovery)); 963 964 done: 965 DPRINTFN(2, "port %d warm reset returning error=%s\n", 966 port, usbd_errstr(err)); 967 return (err); 968 } 969 970 /*------------------------------------------------------------------------* 971 * usbd_req_get_desc 972 * 973 * This function can be used to retrieve USB descriptors. It contains 974 * some additional logic like zeroing of missing descriptor bytes and 975 * retrying an USB descriptor in case of failure. The "min_len" 976 * argument specifies the minimum descriptor length. The "max_len" 977 * argument specifies the maximum descriptor length. If the real 978 * descriptor length is less than the minimum length the missing 979 * byte(s) will be zeroed. The type field, the second byte of the USB 980 * descriptor, will get forced to the correct type. If the "actlen" 981 * pointer is non-NULL, the actual length of the transfer will get 982 * stored in the 16-bit unsigned integer which it is pointing to. The 983 * first byte of the descriptor will not get updated. If the "actlen" 984 * pointer is NULL the first byte of the descriptor will get updated 985 * to reflect the actual length instead. If "min_len" is not equal to 986 * "max_len" then this function will try to retrive the beginning of 987 * the descriptor and base the maximum length on the first byte of the 988 * descriptor. 989 * 990 * Returns: 991 * 0: Success 992 * Else: Failure 993 *------------------------------------------------------------------------*/ 994 usb_error_t 995 usbd_req_get_desc(struct usb_device *udev, 996 struct mtx *mtx, uint16_t *actlen, void *desc, 997 uint16_t min_len, uint16_t max_len, 998 uint16_t id, uint8_t type, uint8_t index, 999 uint8_t retries) 1000 { 1001 struct usb_device_request req; 1002 uint8_t *buf = desc; 1003 usb_error_t err; 1004 1005 DPRINTFN(4, "id=%d, type=%d, index=%d, max_len=%d\n", 1006 id, type, index, max_len); 1007 1008 req.bmRequestType = UT_READ_DEVICE; 1009 req.bRequest = UR_GET_DESCRIPTOR; 1010 USETW2(req.wValue, type, index); 1011 USETW(req.wIndex, id); 1012 1013 while (1) { 1014 if ((min_len < 2) || (max_len < 2)) { 1015 err = USB_ERR_INVAL; 1016 goto done; 1017 } 1018 USETW(req.wLength, min_len); 1019 1020 err = usbd_do_request_flags(udev, mtx, &req, 1021 desc, 0, NULL, 1000 /* ms */); 1022 1023 if (err != 0 && err != USB_ERR_TIMEOUT && 1024 min_len != max_len) { 1025 /* clear descriptor data */ 1026 memset(desc, 0, max_len); 1027 1028 /* try to read full descriptor length */ 1029 USETW(req.wLength, max_len); 1030 1031 err = usbd_do_request_flags(udev, mtx, &req, 1032 desc, USB_SHORT_XFER_OK, NULL, 1000 /* ms */); 1033 1034 if (err == 0) { 1035 /* verify length */ 1036 if (buf[0] > max_len) 1037 buf[0] = max_len; 1038 else if (buf[0] < 2) 1039 err = USB_ERR_INVAL; 1040 1041 min_len = buf[0]; 1042 1043 /* enforce descriptor type */ 1044 buf[1] = type; 1045 goto done; 1046 } 1047 } 1048 1049 if (err) { 1050 if (!retries) { 1051 goto done; 1052 } 1053 retries--; 1054 1055 usb_pause_mtx(mtx, hz / 5); 1056 1057 continue; 1058 } 1059 1060 if (min_len == max_len) { 1061 /* enforce correct length */ 1062 if ((buf[0] > min_len) && (actlen == NULL)) 1063 buf[0] = min_len; 1064 1065 /* enforce correct type */ 1066 buf[1] = type; 1067 1068 goto done; 1069 } 1070 /* range check */ 1071 1072 if (max_len > buf[0]) { 1073 max_len = buf[0]; 1074 } 1075 /* zero minimum data */ 1076 1077 while (min_len > max_len) { 1078 min_len--; 1079 buf[min_len] = 0; 1080 } 1081 1082 /* set new minimum length */ 1083 1084 min_len = max_len; 1085 } 1086 done: 1087 if (actlen != NULL) { 1088 if (err) 1089 *actlen = 0; 1090 else 1091 *actlen = min_len; 1092 } 1093 return (err); 1094 } 1095 1096 /*------------------------------------------------------------------------* 1097 * usbd_req_get_string_any 1098 * 1099 * This function will return the string given by "string_index" 1100 * using the first language ID. The maximum length "len" includes 1101 * the terminating zero. The "len" argument should be twice as 1102 * big pluss 2 bytes, compared with the actual maximum string length ! 1103 * 1104 * Returns: 1105 * 0: Success 1106 * Else: Failure 1107 *------------------------------------------------------------------------*/ 1108 usb_error_t 1109 usbd_req_get_string_any(struct usb_device *udev, struct mtx *mtx, char *buf, 1110 uint16_t len, uint8_t string_index) 1111 { 1112 char *s; 1113 uint8_t *temp; 1114 uint16_t i; 1115 uint16_t n; 1116 uint16_t c; 1117 uint8_t swap; 1118 usb_error_t err; 1119 1120 if (len == 0) { 1121 /* should not happen */ 1122 return (USB_ERR_NORMAL_COMPLETION); 1123 } 1124 if (string_index == 0) { 1125 /* this is the language table */ 1126 buf[0] = 0; 1127 return (USB_ERR_INVAL); 1128 } 1129 if (udev->flags.no_strings) { 1130 buf[0] = 0; 1131 return (USB_ERR_STALLED); 1132 } 1133 err = usbd_req_get_string_desc 1134 (udev, mtx, buf, len, udev->langid, string_index); 1135 if (err) { 1136 buf[0] = 0; 1137 return (err); 1138 } 1139 temp = (uint8_t *)buf; 1140 1141 if (temp[0] < 2) { 1142 /* string length is too short */ 1143 buf[0] = 0; 1144 return (USB_ERR_INVAL); 1145 } 1146 /* reserve one byte for terminating zero */ 1147 len--; 1148 1149 /* find maximum length */ 1150 s = buf; 1151 n = (temp[0] / 2) - 1; 1152 if (n > len) { 1153 n = len; 1154 } 1155 /* skip descriptor header */ 1156 temp += 2; 1157 1158 /* reset swap state */ 1159 swap = 3; 1160 1161 /* convert and filter */ 1162 for (i = 0; (i != n); i++) { 1163 c = UGETW(temp + (2 * i)); 1164 1165 /* convert from Unicode, handle buggy strings */ 1166 if (((c & 0xff00) == 0) && (swap & 1)) { 1167 /* Little Endian, default */ 1168 *s = c; 1169 swap = 1; 1170 } else if (((c & 0x00ff) == 0) && (swap & 2)) { 1171 /* Big Endian */ 1172 *s = c >> 8; 1173 swap = 2; 1174 } else { 1175 /* silently skip bad character */ 1176 continue; 1177 } 1178 1179 /* 1180 * Filter by default - We only allow alphanumerical 1181 * and a few more to avoid any problems with scripts 1182 * and daemons. 1183 */ 1184 if (isalpha(*s) || 1185 isdigit(*s) || 1186 *s == '-' || 1187 *s == '+' || 1188 *s == ' ' || 1189 *s == '.' || 1190 *s == ',' || 1191 *s == ':' || 1192 *s == '/' || 1193 *s == '(' || 1194 *s == ')') { 1195 /* allowed */ 1196 s++; 1197 } 1198 /* silently skip bad character */ 1199 } 1200 *s = 0; /* zero terminate resulting string */ 1201 return (USB_ERR_NORMAL_COMPLETION); 1202 } 1203 1204 /*------------------------------------------------------------------------* 1205 * usbd_req_get_string_desc 1206 * 1207 * If you don't know the language ID, consider using 1208 * "usbd_req_get_string_any()". 1209 * 1210 * Returns: 1211 * 0: Success 1212 * Else: Failure 1213 *------------------------------------------------------------------------*/ 1214 usb_error_t 1215 usbd_req_get_string_desc(struct usb_device *udev, struct mtx *mtx, void *sdesc, 1216 uint16_t max_len, uint16_t lang_id, 1217 uint8_t string_index) 1218 { 1219 return (usbd_req_get_desc(udev, mtx, NULL, sdesc, 2, max_len, lang_id, 1220 UDESC_STRING, string_index, 0)); 1221 } 1222 1223 /*------------------------------------------------------------------------* 1224 * usbd_req_get_config_desc_ptr 1225 * 1226 * This function is used in device side mode to retrieve the pointer 1227 * to the generated config descriptor. This saves allocating space for 1228 * an additional config descriptor when setting the configuration. 1229 * 1230 * Returns: 1231 * 0: Success 1232 * Else: Failure 1233 *------------------------------------------------------------------------*/ 1234 usb_error_t 1235 usbd_req_get_descriptor_ptr(struct usb_device *udev, 1236 struct usb_config_descriptor **ppcd, uint16_t wValue) 1237 { 1238 struct usb_device_request req; 1239 usb_handle_req_t *hr_func; 1240 const void *ptr; 1241 uint16_t len; 1242 usb_error_t err; 1243 1244 req.bmRequestType = UT_READ_DEVICE; 1245 req.bRequest = UR_GET_DESCRIPTOR; 1246 USETW(req.wValue, wValue); 1247 USETW(req.wIndex, 0); 1248 USETW(req.wLength, 0); 1249 1250 ptr = NULL; 1251 len = 0; 1252 1253 hr_func = usbd_get_hr_func(udev); 1254 1255 if (hr_func == NULL) 1256 err = USB_ERR_INVAL; 1257 else { 1258 USB_BUS_LOCK(udev->bus); 1259 err = (hr_func) (udev, &req, &ptr, &len); 1260 USB_BUS_UNLOCK(udev->bus); 1261 } 1262 1263 if (err) 1264 ptr = NULL; 1265 else if (ptr == NULL) 1266 err = USB_ERR_INVAL; 1267 1268 *ppcd = __DECONST(struct usb_config_descriptor *, ptr); 1269 1270 return (err); 1271 } 1272 1273 /*------------------------------------------------------------------------* 1274 * usbd_req_get_config_desc 1275 * 1276 * Returns: 1277 * 0: Success 1278 * Else: Failure 1279 *------------------------------------------------------------------------*/ 1280 usb_error_t 1281 usbd_req_get_config_desc(struct usb_device *udev, struct mtx *mtx, 1282 struct usb_config_descriptor *d, uint8_t conf_index) 1283 { 1284 usb_error_t err; 1285 1286 DPRINTFN(4, "confidx=%d\n", conf_index); 1287 1288 err = usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1289 sizeof(*d), 0, UDESC_CONFIG, conf_index, 0); 1290 if (err) { 1291 goto done; 1292 } 1293 /* Extra sanity checking */ 1294 if (UGETW(d->wTotalLength) < (uint16_t)sizeof(*d)) { 1295 err = USB_ERR_INVAL; 1296 } 1297 done: 1298 return (err); 1299 } 1300 1301 /*------------------------------------------------------------------------* 1302 * usbd_alloc_config_desc 1303 * 1304 * This function is used to allocate a zeroed configuration 1305 * descriptor. 1306 * 1307 * Returns: 1308 * NULL: Failure 1309 * Else: Success 1310 *------------------------------------------------------------------------*/ 1311 void * 1312 usbd_alloc_config_desc(struct usb_device *udev, uint32_t size) 1313 { 1314 if (size > USB_CONFIG_MAX) { 1315 DPRINTF("Configuration descriptor too big\n"); 1316 return (NULL); 1317 } 1318 #if (USB_HAVE_FIXED_CONFIG == 0) 1319 return (malloc(size, M_USBDEV, M_ZERO | M_WAITOK)); 1320 #else 1321 memset(udev->config_data, 0, sizeof(udev->config_data)); 1322 return (udev->config_data); 1323 #endif 1324 } 1325 1326 /*------------------------------------------------------------------------* 1327 * usbd_alloc_config_desc 1328 * 1329 * This function is used to free a configuration descriptor. 1330 *------------------------------------------------------------------------*/ 1331 void 1332 usbd_free_config_desc(struct usb_device *udev, void *ptr) 1333 { 1334 #if (USB_HAVE_FIXED_CONFIG == 0) 1335 free(ptr, M_USBDEV); 1336 #endif 1337 } 1338 1339 /*------------------------------------------------------------------------* 1340 * usbd_req_get_config_desc_full 1341 * 1342 * This function gets the complete USB configuration descriptor and 1343 * ensures that "wTotalLength" is correct. The returned configuration 1344 * descriptor is freed by calling "usbd_free_config_desc()". 1345 * 1346 * Returns: 1347 * 0: Success 1348 * Else: Failure 1349 *------------------------------------------------------------------------*/ 1350 usb_error_t 1351 usbd_req_get_config_desc_full(struct usb_device *udev, struct mtx *mtx, 1352 struct usb_config_descriptor **ppcd, uint8_t index) 1353 { 1354 struct usb_config_descriptor cd; 1355 struct usb_config_descriptor *cdesc; 1356 uint32_t len; 1357 usb_error_t err; 1358 1359 DPRINTFN(4, "index=%d\n", index); 1360 1361 *ppcd = NULL; 1362 1363 err = usbd_req_get_config_desc(udev, mtx, &cd, index); 1364 if (err) 1365 return (err); 1366 1367 /* get full descriptor */ 1368 len = UGETW(cd.wTotalLength); 1369 if (len < (uint32_t)sizeof(*cdesc)) { 1370 /* corrupt descriptor */ 1371 return (USB_ERR_INVAL); 1372 } else if (len > USB_CONFIG_MAX) { 1373 DPRINTF("Configuration descriptor was truncated\n"); 1374 len = USB_CONFIG_MAX; 1375 } 1376 cdesc = usbd_alloc_config_desc(udev, len); 1377 if (cdesc == NULL) 1378 return (USB_ERR_NOMEM); 1379 err = usbd_req_get_desc(udev, mtx, NULL, cdesc, len, len, 0, 1380 UDESC_CONFIG, index, 3); 1381 if (err) { 1382 usbd_free_config_desc(udev, cdesc); 1383 return (err); 1384 } 1385 /* make sure that the device is not fooling us: */ 1386 USETW(cdesc->wTotalLength, len); 1387 1388 *ppcd = cdesc; 1389 1390 return (0); /* success */ 1391 } 1392 1393 /*------------------------------------------------------------------------* 1394 * usbd_req_get_device_desc 1395 * 1396 * Returns: 1397 * 0: Success 1398 * Else: Failure 1399 *------------------------------------------------------------------------*/ 1400 usb_error_t 1401 usbd_req_get_device_desc(struct usb_device *udev, struct mtx *mtx, 1402 struct usb_device_descriptor *d) 1403 { 1404 DPRINTFN(4, "\n"); 1405 return (usbd_req_get_desc(udev, mtx, NULL, d, sizeof(*d), 1406 sizeof(*d), 0, UDESC_DEVICE, 0, 3)); 1407 } 1408 1409 /*------------------------------------------------------------------------* 1410 * usbd_req_get_alt_interface_no 1411 * 1412 * Returns: 1413 * 0: Success 1414 * Else: Failure 1415 *------------------------------------------------------------------------*/ 1416 usb_error_t 1417 usbd_req_get_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1418 uint8_t *alt_iface_no, uint8_t iface_index) 1419 { 1420 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1421 struct usb_device_request req; 1422 1423 if ((iface == NULL) || (iface->idesc == NULL)) 1424 return (USB_ERR_INVAL); 1425 1426 req.bmRequestType = UT_READ_INTERFACE; 1427 req.bRequest = UR_GET_INTERFACE; 1428 USETW(req.wValue, 0); 1429 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1430 req.wIndex[1] = 0; 1431 USETW(req.wLength, 1); 1432 return (usbd_do_request(udev, mtx, &req, alt_iface_no)); 1433 } 1434 1435 /*------------------------------------------------------------------------* 1436 * usbd_req_set_alt_interface_no 1437 * 1438 * Returns: 1439 * 0: Success 1440 * Else: Failure 1441 *------------------------------------------------------------------------*/ 1442 usb_error_t 1443 usbd_req_set_alt_interface_no(struct usb_device *udev, struct mtx *mtx, 1444 uint8_t iface_index, uint8_t alt_no) 1445 { 1446 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1447 struct usb_device_request req; 1448 usb_error_t err; 1449 1450 if ((iface == NULL) || (iface->idesc == NULL)) 1451 return (USB_ERR_INVAL); 1452 1453 req.bmRequestType = UT_WRITE_INTERFACE; 1454 req.bRequest = UR_SET_INTERFACE; 1455 req.wValue[0] = alt_no; 1456 req.wValue[1] = 0; 1457 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1458 req.wIndex[1] = 0; 1459 USETW(req.wLength, 0); 1460 err = usbd_do_request(udev, mtx, &req, 0); 1461 if (err == USB_ERR_STALLED && iface->num_altsetting == 1) { 1462 /* 1463 * The USB specification chapter 9.4.10 says that USB 1464 * devices having only one alternate setting are 1465 * allowed to STALL this request. Ignore this failure. 1466 */ 1467 err = 0; 1468 DPRINTF("Setting default alternate number failed. (ignored)\n"); 1469 } 1470 return (err); 1471 } 1472 1473 /*------------------------------------------------------------------------* 1474 * usbd_req_get_device_status 1475 * 1476 * Returns: 1477 * 0: Success 1478 * Else: Failure 1479 *------------------------------------------------------------------------*/ 1480 usb_error_t 1481 usbd_req_get_device_status(struct usb_device *udev, struct mtx *mtx, 1482 struct usb_status *st) 1483 { 1484 struct usb_device_request req; 1485 1486 req.bmRequestType = UT_READ_DEVICE; 1487 req.bRequest = UR_GET_STATUS; 1488 USETW(req.wValue, 0); 1489 USETW(req.wIndex, 0); 1490 USETW(req.wLength, sizeof(*st)); 1491 return (usbd_do_request(udev, mtx, &req, st)); 1492 } 1493 1494 /*------------------------------------------------------------------------* 1495 * usbd_req_get_hub_descriptor 1496 * 1497 * Returns: 1498 * 0: Success 1499 * Else: Failure 1500 *------------------------------------------------------------------------*/ 1501 usb_error_t 1502 usbd_req_get_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1503 struct usb_hub_descriptor *hd, uint8_t nports) 1504 { 1505 struct usb_device_request req; 1506 uint16_t len = (nports + 7 + (8 * 8)) / 8; 1507 1508 req.bmRequestType = UT_READ_CLASS_DEVICE; 1509 req.bRequest = UR_GET_DESCRIPTOR; 1510 USETW2(req.wValue, UDESC_HUB, 0); 1511 USETW(req.wIndex, 0); 1512 USETW(req.wLength, len); 1513 return (usbd_do_request(udev, mtx, &req, hd)); 1514 } 1515 1516 /*------------------------------------------------------------------------* 1517 * usbd_req_get_ss_hub_descriptor 1518 * 1519 * Returns: 1520 * 0: Success 1521 * Else: Failure 1522 *------------------------------------------------------------------------*/ 1523 usb_error_t 1524 usbd_req_get_ss_hub_descriptor(struct usb_device *udev, struct mtx *mtx, 1525 struct usb_hub_ss_descriptor *hd, uint8_t nports) 1526 { 1527 struct usb_device_request req; 1528 uint16_t len = sizeof(*hd) - 32 + 1 + ((nports + 7) / 8); 1529 1530 req.bmRequestType = UT_READ_CLASS_DEVICE; 1531 req.bRequest = UR_GET_DESCRIPTOR; 1532 USETW2(req.wValue, UDESC_SS_HUB, 0); 1533 USETW(req.wIndex, 0); 1534 USETW(req.wLength, len); 1535 return (usbd_do_request(udev, mtx, &req, hd)); 1536 } 1537 1538 /*------------------------------------------------------------------------* 1539 * usbd_req_get_hub_status 1540 * 1541 * Returns: 1542 * 0: Success 1543 * Else: Failure 1544 *------------------------------------------------------------------------*/ 1545 usb_error_t 1546 usbd_req_get_hub_status(struct usb_device *udev, struct mtx *mtx, 1547 struct usb_hub_status *st) 1548 { 1549 struct usb_device_request req; 1550 1551 req.bmRequestType = UT_READ_CLASS_DEVICE; 1552 req.bRequest = UR_GET_STATUS; 1553 USETW(req.wValue, 0); 1554 USETW(req.wIndex, 0); 1555 USETW(req.wLength, sizeof(struct usb_hub_status)); 1556 return (usbd_do_request(udev, mtx, &req, st)); 1557 } 1558 1559 /*------------------------------------------------------------------------* 1560 * usbd_req_set_address 1561 * 1562 * This function is used to set the address for an USB device. After 1563 * port reset the USB device will respond at address zero. 1564 * 1565 * Returns: 1566 * 0: Success 1567 * Else: Failure 1568 *------------------------------------------------------------------------*/ 1569 usb_error_t 1570 usbd_req_set_address(struct usb_device *udev, struct mtx *mtx, uint16_t addr) 1571 { 1572 struct usb_device_request req; 1573 usb_error_t err; 1574 1575 DPRINTFN(6, "setting device address=%d\n", addr); 1576 1577 req.bmRequestType = UT_WRITE_DEVICE; 1578 req.bRequest = UR_SET_ADDRESS; 1579 USETW(req.wValue, addr); 1580 USETW(req.wIndex, 0); 1581 USETW(req.wLength, 0); 1582 1583 err = USB_ERR_INVAL; 1584 1585 /* check if USB controller handles set address */ 1586 if (udev->bus->methods->set_address != NULL) 1587 err = (udev->bus->methods->set_address) (udev, mtx, addr); 1588 1589 if (err != USB_ERR_INVAL) 1590 goto done; 1591 1592 /* Setting the address should not take more than 1 second ! */ 1593 err = usbd_do_request_flags(udev, mtx, &req, NULL, 1594 USB_DELAY_STATUS_STAGE, NULL, 1000); 1595 1596 done: 1597 /* allow device time to set new address */ 1598 usb_pause_mtx(mtx, 1599 USB_MS_TO_TICKS(usb_set_address_settle)); 1600 1601 return (err); 1602 } 1603 1604 /*------------------------------------------------------------------------* 1605 * usbd_req_get_port_status 1606 * 1607 * Returns: 1608 * 0: Success 1609 * Else: Failure 1610 *------------------------------------------------------------------------*/ 1611 usb_error_t 1612 usbd_req_get_port_status(struct usb_device *udev, struct mtx *mtx, 1613 struct usb_port_status *ps, uint8_t port) 1614 { 1615 struct usb_device_request req; 1616 1617 req.bmRequestType = UT_READ_CLASS_OTHER; 1618 req.bRequest = UR_GET_STATUS; 1619 USETW(req.wValue, 0); 1620 req.wIndex[0] = port; 1621 req.wIndex[1] = 0; 1622 USETW(req.wLength, sizeof(*ps)); 1623 1624 return (usbd_do_request_flags(udev, mtx, &req, ps, 0, NULL, 1000)); 1625 } 1626 1627 /*------------------------------------------------------------------------* 1628 * usbd_req_clear_hub_feature 1629 * 1630 * Returns: 1631 * 0: Success 1632 * Else: Failure 1633 *------------------------------------------------------------------------*/ 1634 usb_error_t 1635 usbd_req_clear_hub_feature(struct usb_device *udev, struct mtx *mtx, 1636 uint16_t sel) 1637 { 1638 struct usb_device_request req; 1639 1640 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1641 req.bRequest = UR_CLEAR_FEATURE; 1642 USETW(req.wValue, sel); 1643 USETW(req.wIndex, 0); 1644 USETW(req.wLength, 0); 1645 return (usbd_do_request(udev, mtx, &req, 0)); 1646 } 1647 1648 /*------------------------------------------------------------------------* 1649 * usbd_req_set_hub_feature 1650 * 1651 * Returns: 1652 * 0: Success 1653 * Else: Failure 1654 *------------------------------------------------------------------------*/ 1655 usb_error_t 1656 usbd_req_set_hub_feature(struct usb_device *udev, struct mtx *mtx, 1657 uint16_t sel) 1658 { 1659 struct usb_device_request req; 1660 1661 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1662 req.bRequest = UR_SET_FEATURE; 1663 USETW(req.wValue, sel); 1664 USETW(req.wIndex, 0); 1665 USETW(req.wLength, 0); 1666 return (usbd_do_request(udev, mtx, &req, 0)); 1667 } 1668 1669 /*------------------------------------------------------------------------* 1670 * usbd_req_set_hub_u1_timeout 1671 * 1672 * Returns: 1673 * 0: Success 1674 * Else: Failure 1675 *------------------------------------------------------------------------*/ 1676 usb_error_t 1677 usbd_req_set_hub_u1_timeout(struct usb_device *udev, struct mtx *mtx, 1678 uint8_t port, uint8_t timeout) 1679 { 1680 struct usb_device_request req; 1681 1682 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1683 req.bRequest = UR_SET_FEATURE; 1684 USETW(req.wValue, UHF_PORT_U1_TIMEOUT); 1685 req.wIndex[0] = port; 1686 req.wIndex[1] = timeout; 1687 USETW(req.wLength, 0); 1688 return (usbd_do_request(udev, mtx, &req, 0)); 1689 } 1690 1691 /*------------------------------------------------------------------------* 1692 * usbd_req_set_hub_u2_timeout 1693 * 1694 * Returns: 1695 * 0: Success 1696 * Else: Failure 1697 *------------------------------------------------------------------------*/ 1698 usb_error_t 1699 usbd_req_set_hub_u2_timeout(struct usb_device *udev, struct mtx *mtx, 1700 uint8_t port, uint8_t timeout) 1701 { 1702 struct usb_device_request req; 1703 1704 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1705 req.bRequest = UR_SET_FEATURE; 1706 USETW(req.wValue, UHF_PORT_U2_TIMEOUT); 1707 req.wIndex[0] = port; 1708 req.wIndex[1] = timeout; 1709 USETW(req.wLength, 0); 1710 return (usbd_do_request(udev, mtx, &req, 0)); 1711 } 1712 1713 /*------------------------------------------------------------------------* 1714 * usbd_req_set_hub_depth 1715 * 1716 * Returns: 1717 * 0: Success 1718 * Else: Failure 1719 *------------------------------------------------------------------------*/ 1720 usb_error_t 1721 usbd_req_set_hub_depth(struct usb_device *udev, struct mtx *mtx, 1722 uint16_t depth) 1723 { 1724 struct usb_device_request req; 1725 1726 req.bmRequestType = UT_WRITE_CLASS_DEVICE; 1727 req.bRequest = UR_SET_HUB_DEPTH; 1728 USETW(req.wValue, depth); 1729 USETW(req.wIndex, 0); 1730 USETW(req.wLength, 0); 1731 return (usbd_do_request(udev, mtx, &req, 0)); 1732 } 1733 1734 /*------------------------------------------------------------------------* 1735 * usbd_req_clear_port_feature 1736 * 1737 * Returns: 1738 * 0: Success 1739 * Else: Failure 1740 *------------------------------------------------------------------------*/ 1741 usb_error_t 1742 usbd_req_clear_port_feature(struct usb_device *udev, struct mtx *mtx, 1743 uint8_t port, uint16_t sel) 1744 { 1745 struct usb_device_request req; 1746 1747 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1748 req.bRequest = UR_CLEAR_FEATURE; 1749 USETW(req.wValue, sel); 1750 req.wIndex[0] = port; 1751 req.wIndex[1] = 0; 1752 USETW(req.wLength, 0); 1753 return (usbd_do_request(udev, mtx, &req, 0)); 1754 } 1755 1756 /*------------------------------------------------------------------------* 1757 * usbd_req_set_port_feature 1758 * 1759 * Returns: 1760 * 0: Success 1761 * Else: Failure 1762 *------------------------------------------------------------------------*/ 1763 usb_error_t 1764 usbd_req_set_port_feature(struct usb_device *udev, struct mtx *mtx, 1765 uint8_t port, uint16_t sel) 1766 { 1767 struct usb_device_request req; 1768 1769 req.bmRequestType = UT_WRITE_CLASS_OTHER; 1770 req.bRequest = UR_SET_FEATURE; 1771 USETW(req.wValue, sel); 1772 req.wIndex[0] = port; 1773 req.wIndex[1] = 0; 1774 USETW(req.wLength, 0); 1775 return (usbd_do_request(udev, mtx, &req, 0)); 1776 } 1777 1778 /*------------------------------------------------------------------------* 1779 * usbd_req_set_protocol 1780 * 1781 * Returns: 1782 * 0: Success 1783 * Else: Failure 1784 *------------------------------------------------------------------------*/ 1785 usb_error_t 1786 usbd_req_set_protocol(struct usb_device *udev, struct mtx *mtx, 1787 uint8_t iface_index, uint16_t report) 1788 { 1789 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1790 struct usb_device_request req; 1791 1792 if ((iface == NULL) || (iface->idesc == NULL)) { 1793 return (USB_ERR_INVAL); 1794 } 1795 DPRINTFN(5, "iface=%p, report=%d, endpt=%d\n", 1796 iface, report, iface->idesc->bInterfaceNumber); 1797 1798 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1799 req.bRequest = UR_SET_PROTOCOL; 1800 USETW(req.wValue, report); 1801 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1802 req.wIndex[1] = 0; 1803 USETW(req.wLength, 0); 1804 return (usbd_do_request(udev, mtx, &req, 0)); 1805 } 1806 1807 /*------------------------------------------------------------------------* 1808 * usbd_req_set_report 1809 * 1810 * Returns: 1811 * 0: Success 1812 * Else: Failure 1813 *------------------------------------------------------------------------*/ 1814 usb_error_t 1815 usbd_req_set_report(struct usb_device *udev, struct mtx *mtx, void *data, uint16_t len, 1816 uint8_t iface_index, uint8_t type, uint8_t id) 1817 { 1818 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1819 struct usb_device_request req; 1820 1821 if ((iface == NULL) || (iface->idesc == NULL)) { 1822 return (USB_ERR_INVAL); 1823 } 1824 DPRINTFN(5, "len=%d\n", len); 1825 1826 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1827 req.bRequest = UR_SET_REPORT; 1828 USETW2(req.wValue, type, id); 1829 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1830 req.wIndex[1] = 0; 1831 USETW(req.wLength, len); 1832 return (usbd_do_request(udev, mtx, &req, data)); 1833 } 1834 1835 /*------------------------------------------------------------------------* 1836 * usbd_req_get_report 1837 * 1838 * Returns: 1839 * 0: Success 1840 * Else: Failure 1841 *------------------------------------------------------------------------*/ 1842 usb_error_t 1843 usbd_req_get_report(struct usb_device *udev, struct mtx *mtx, void *data, 1844 uint16_t len, uint8_t iface_index, uint8_t type, uint8_t id) 1845 { 1846 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1847 struct usb_device_request req; 1848 1849 if ((iface == NULL) || (iface->idesc == NULL)) { 1850 return (USB_ERR_INVAL); 1851 } 1852 DPRINTFN(5, "len=%d\n", len); 1853 1854 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1855 req.bRequest = UR_GET_REPORT; 1856 USETW2(req.wValue, type, id); 1857 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1858 req.wIndex[1] = 0; 1859 USETW(req.wLength, len); 1860 return (usbd_do_request(udev, mtx, &req, data)); 1861 } 1862 1863 /*------------------------------------------------------------------------* 1864 * usbd_req_set_idle 1865 * 1866 * Returns: 1867 * 0: Success 1868 * Else: Failure 1869 *------------------------------------------------------------------------*/ 1870 usb_error_t 1871 usbd_req_set_idle(struct usb_device *udev, struct mtx *mtx, 1872 uint8_t iface_index, uint8_t duration, uint8_t id) 1873 { 1874 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1875 struct usb_device_request req; 1876 1877 if ((iface == NULL) || (iface->idesc == NULL)) { 1878 return (USB_ERR_INVAL); 1879 } 1880 DPRINTFN(5, "%d %d\n", duration, id); 1881 1882 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1883 req.bRequest = UR_SET_IDLE; 1884 USETW2(req.wValue, duration, id); 1885 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1886 req.wIndex[1] = 0; 1887 USETW(req.wLength, 0); 1888 return (usbd_do_request(udev, mtx, &req, 0)); 1889 } 1890 1891 /*------------------------------------------------------------------------* 1892 * usbd_req_get_report_descriptor 1893 * 1894 * Returns: 1895 * 0: Success 1896 * Else: Failure 1897 *------------------------------------------------------------------------*/ 1898 usb_error_t 1899 usbd_req_get_report_descriptor(struct usb_device *udev, struct mtx *mtx, 1900 void *d, uint16_t size, uint8_t iface_index) 1901 { 1902 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1903 struct usb_device_request req; 1904 1905 if ((iface == NULL) || (iface->idesc == NULL)) { 1906 return (USB_ERR_INVAL); 1907 } 1908 req.bmRequestType = UT_READ_INTERFACE; 1909 req.bRequest = UR_GET_DESCRIPTOR; 1910 USETW2(req.wValue, UDESC_REPORT, 0); /* report id should be 0 */ 1911 req.wIndex[0] = iface->idesc->bInterfaceNumber; 1912 req.wIndex[1] = 0; 1913 USETW(req.wLength, size); 1914 return (usbd_do_request(udev, mtx, &req, d)); 1915 } 1916 1917 /*------------------------------------------------------------------------* 1918 * usbd_req_set_config 1919 * 1920 * This function is used to select the current configuration number in 1921 * both USB device side mode and USB host side mode. When setting the 1922 * configuration the function of the interfaces can change. 1923 * 1924 * Returns: 1925 * 0: Success 1926 * Else: Failure 1927 *------------------------------------------------------------------------*/ 1928 usb_error_t 1929 usbd_req_set_config(struct usb_device *udev, struct mtx *mtx, uint8_t conf) 1930 { 1931 struct usb_device_request req; 1932 1933 DPRINTF("setting config %d\n", conf); 1934 1935 /* do "set configuration" request */ 1936 1937 req.bmRequestType = UT_WRITE_DEVICE; 1938 req.bRequest = UR_SET_CONFIG; 1939 req.wValue[0] = conf; 1940 req.wValue[1] = 0; 1941 USETW(req.wIndex, 0); 1942 USETW(req.wLength, 0); 1943 return (usbd_do_request(udev, mtx, &req, 0)); 1944 } 1945 1946 /*------------------------------------------------------------------------* 1947 * usbd_req_get_config 1948 * 1949 * Returns: 1950 * 0: Success 1951 * Else: Failure 1952 *------------------------------------------------------------------------*/ 1953 usb_error_t 1954 usbd_req_get_config(struct usb_device *udev, struct mtx *mtx, uint8_t *pconf) 1955 { 1956 struct usb_device_request req; 1957 1958 req.bmRequestType = UT_READ_DEVICE; 1959 req.bRequest = UR_GET_CONFIG; 1960 USETW(req.wValue, 0); 1961 USETW(req.wIndex, 0); 1962 USETW(req.wLength, 1); 1963 return (usbd_do_request(udev, mtx, &req, pconf)); 1964 } 1965 1966 /*------------------------------------------------------------------------* 1967 * usbd_setup_device_desc 1968 *------------------------------------------------------------------------*/ 1969 usb_error_t 1970 usbd_setup_device_desc(struct usb_device *udev, struct mtx *mtx) 1971 { 1972 usb_error_t err; 1973 1974 /* 1975 * Get the first 8 bytes of the device descriptor ! 1976 * 1977 * NOTE: "usbd_do_request()" will check the device descriptor 1978 * next time we do a request to see if the maximum packet size 1979 * changed! The 8 first bytes of the device descriptor 1980 * contains the maximum packet size to use on control endpoint 1981 * 0. If this value is different from "USB_MAX_IPACKET" a new 1982 * USB control request will be setup! 1983 */ 1984 switch (udev->speed) { 1985 case USB_SPEED_FULL: 1986 if (usb_full_ddesc != 0) { 1987 /* get full device descriptor */ 1988 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 1989 if (err == 0) 1990 break; 1991 } 1992 1993 /* get partial device descriptor, some devices crash on this */ 1994 err = usbd_req_get_desc(udev, mtx, NULL, &udev->ddesc, 1995 USB_MAX_IPACKET, USB_MAX_IPACKET, 0, UDESC_DEVICE, 0, 0); 1996 if (err != 0) { 1997 DPRINTF("Trying fallback for getting the USB device descriptor\n"); 1998 /* try 8 bytes bMaxPacketSize */ 1999 udev->ddesc.bMaxPacketSize = 8; 2000 /* get full device descriptor */ 2001 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 2002 if (err == 0) 2003 break; 2004 /* try 16 bytes bMaxPacketSize */ 2005 udev->ddesc.bMaxPacketSize = 16; 2006 /* get full device descriptor */ 2007 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 2008 if (err == 0) 2009 break; 2010 /* try 32/64 bytes bMaxPacketSize */ 2011 udev->ddesc.bMaxPacketSize = 32; 2012 } 2013 /* get the full device descriptor */ 2014 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 2015 break; 2016 2017 default: 2018 DPRINTF("Minimum bMaxPacketSize is large enough " 2019 "to hold the complete device descriptor or " 2020 "only one bMaxPacketSize choice\n"); 2021 2022 /* get the full device descriptor */ 2023 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 2024 2025 /* try one more time, if error */ 2026 if (err != 0) 2027 err = usbd_req_get_device_desc(udev, mtx, &udev->ddesc); 2028 break; 2029 } 2030 2031 if (err != 0) { 2032 DPRINTFN(0, "getting device descriptor " 2033 "at addr %d failed, %s\n", udev->address, 2034 usbd_errstr(err)); 2035 return (err); 2036 } 2037 2038 DPRINTF("adding unit addr=%d, rev=%02x, class=%d, " 2039 "subclass=%d, protocol=%d, maxpacket=%d, len=%d, speed=%d\n", 2040 udev->address, UGETW(udev->ddesc.bcdUSB), 2041 udev->ddesc.bDeviceClass, 2042 udev->ddesc.bDeviceSubClass, 2043 udev->ddesc.bDeviceProtocol, 2044 udev->ddesc.bMaxPacketSize, 2045 udev->ddesc.bLength, 2046 udev->speed); 2047 2048 return (err); 2049 } 2050 2051 /*------------------------------------------------------------------------* 2052 * usbd_req_re_enumerate 2053 * 2054 * NOTE: After this function returns the hardware is in the 2055 * unconfigured state! The application is responsible for setting a 2056 * new configuration. 2057 * 2058 * Returns: 2059 * 0: Success 2060 * Else: Failure 2061 *------------------------------------------------------------------------*/ 2062 usb_error_t 2063 usbd_req_re_enumerate(struct usb_device *udev, struct mtx *mtx) 2064 { 2065 struct usb_device *parent_hub; 2066 usb_error_t err; 2067 uint8_t old_addr; 2068 uint8_t do_retry = 1; 2069 2070 if (udev->flags.usb_mode != USB_MODE_HOST) { 2071 return (USB_ERR_INVAL); 2072 } 2073 old_addr = udev->address; 2074 parent_hub = udev->parent_hub; 2075 if (parent_hub == NULL) { 2076 return (USB_ERR_INVAL); 2077 } 2078 retry: 2079 #if USB_HAVE_TT_SUPPORT 2080 /* 2081 * Try to reset the High Speed parent HUB of a LOW- or FULL- 2082 * speed device, if any. 2083 */ 2084 if (udev->parent_hs_hub != NULL && 2085 udev->speed != USB_SPEED_HIGH) { 2086 DPRINTF("Trying to reset parent High Speed TT.\n"); 2087 if (udev->parent_hs_hub == parent_hub && 2088 (uhub_count_active_host_ports(parent_hub, USB_SPEED_LOW) + 2089 uhub_count_active_host_ports(parent_hub, USB_SPEED_FULL)) == 1) { 2090 /* we can reset the whole TT */ 2091 err = usbd_req_reset_tt(parent_hub, NULL, 2092 udev->hs_port_no); 2093 } else { 2094 /* only reset a particular device and endpoint */ 2095 err = usbd_req_clear_tt_buffer(udev->parent_hs_hub, NULL, 2096 udev->hs_port_no, old_addr, UE_CONTROL, 0); 2097 } 2098 if (err) { 2099 DPRINTF("Resetting parent High " 2100 "Speed TT failed (%s).\n", 2101 usbd_errstr(err)); 2102 } 2103 } 2104 #endif 2105 /* Try to warm reset first */ 2106 if (parent_hub->speed == USB_SPEED_SUPER) 2107 usbd_req_warm_reset_port(parent_hub, mtx, udev->port_no); 2108 2109 /* Try to reset the parent HUB port. */ 2110 err = usbd_req_reset_port(parent_hub, mtx, udev->port_no); 2111 if (err) { 2112 DPRINTFN(0, "addr=%d, port reset failed, %s\n", 2113 old_addr, usbd_errstr(err)); 2114 goto done; 2115 } 2116 2117 /* 2118 * After that the port has been reset our device should be at 2119 * address zero: 2120 */ 2121 udev->address = USB_START_ADDR; 2122 2123 /* reset "bMaxPacketSize" */ 2124 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 2125 2126 /* reset USB state */ 2127 usb_set_device_state(udev, USB_STATE_POWERED); 2128 2129 /* 2130 * Restore device address: 2131 */ 2132 err = usbd_req_set_address(udev, mtx, old_addr); 2133 if (err) { 2134 /* XXX ignore any errors! */ 2135 DPRINTFN(0, "addr=%d, set address failed! (%s, ignored)\n", 2136 old_addr, usbd_errstr(err)); 2137 } 2138 /* 2139 * Restore device address, if the controller driver did not 2140 * set a new one: 2141 */ 2142 if (udev->address == USB_START_ADDR) 2143 udev->address = old_addr; 2144 2145 /* setup the device descriptor and the initial "wMaxPacketSize" */ 2146 err = usbd_setup_device_desc(udev, mtx); 2147 2148 done: 2149 if (err && do_retry) { 2150 /* give the USB firmware some time to load */ 2151 usb_pause_mtx(mtx, hz / 2); 2152 /* no more retries after this retry */ 2153 do_retry = 0; 2154 /* try again */ 2155 goto retry; 2156 } 2157 /* restore address */ 2158 if (udev->address == USB_START_ADDR) 2159 udev->address = old_addr; 2160 /* update state, if successful */ 2161 if (err == 0) 2162 usb_set_device_state(udev, USB_STATE_ADDRESSED); 2163 return (err); 2164 } 2165 2166 /*------------------------------------------------------------------------* 2167 * usbd_req_clear_device_feature 2168 * 2169 * Returns: 2170 * 0: Success 2171 * Else: Failure 2172 *------------------------------------------------------------------------*/ 2173 usb_error_t 2174 usbd_req_clear_device_feature(struct usb_device *udev, struct mtx *mtx, 2175 uint16_t sel) 2176 { 2177 struct usb_device_request req; 2178 2179 req.bmRequestType = UT_WRITE_DEVICE; 2180 req.bRequest = UR_CLEAR_FEATURE; 2181 USETW(req.wValue, sel); 2182 USETW(req.wIndex, 0); 2183 USETW(req.wLength, 0); 2184 return (usbd_do_request(udev, mtx, &req, 0)); 2185 } 2186 2187 /*------------------------------------------------------------------------* 2188 * usbd_req_set_device_feature 2189 * 2190 * Returns: 2191 * 0: Success 2192 * Else: Failure 2193 *------------------------------------------------------------------------*/ 2194 usb_error_t 2195 usbd_req_set_device_feature(struct usb_device *udev, struct mtx *mtx, 2196 uint16_t sel) 2197 { 2198 struct usb_device_request req; 2199 2200 req.bmRequestType = UT_WRITE_DEVICE; 2201 req.bRequest = UR_SET_FEATURE; 2202 USETW(req.wValue, sel); 2203 USETW(req.wIndex, 0); 2204 USETW(req.wLength, 0); 2205 return (usbd_do_request(udev, mtx, &req, 0)); 2206 } 2207 2208 /*------------------------------------------------------------------------* 2209 * usbd_req_reset_tt 2210 * 2211 * Returns: 2212 * 0: Success 2213 * Else: Failure 2214 *------------------------------------------------------------------------*/ 2215 usb_error_t 2216 usbd_req_reset_tt(struct usb_device *udev, struct mtx *mtx, 2217 uint8_t port) 2218 { 2219 struct usb_device_request req; 2220 2221 /* For single TT HUBs the port should be 1 */ 2222 2223 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 2224 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 2225 port = 1; 2226 2227 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2228 req.bRequest = UR_RESET_TT; 2229 USETW(req.wValue, 0); 2230 req.wIndex[0] = port; 2231 req.wIndex[1] = 0; 2232 USETW(req.wLength, 0); 2233 return (usbd_do_request(udev, mtx, &req, 0)); 2234 } 2235 2236 /*------------------------------------------------------------------------* 2237 * usbd_req_clear_tt_buffer 2238 * 2239 * For single TT HUBs the port should be 1. 2240 * 2241 * Returns: 2242 * 0: Success 2243 * Else: Failure 2244 *------------------------------------------------------------------------*/ 2245 usb_error_t 2246 usbd_req_clear_tt_buffer(struct usb_device *udev, struct mtx *mtx, 2247 uint8_t port, uint8_t addr, uint8_t type, uint8_t endpoint) 2248 { 2249 struct usb_device_request req; 2250 uint16_t wValue; 2251 2252 /* For single TT HUBs the port should be 1 */ 2253 2254 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 2255 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 2256 port = 1; 2257 2258 wValue = (endpoint & 0xF) | ((addr & 0x7F) << 4) | 2259 ((endpoint & 0x80) << 8) | ((type & 3) << 12); 2260 2261 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2262 req.bRequest = UR_CLEAR_TT_BUFFER; 2263 USETW(req.wValue, wValue); 2264 req.wIndex[0] = port; 2265 req.wIndex[1] = 0; 2266 USETW(req.wLength, 0); 2267 return (usbd_do_request(udev, mtx, &req, 0)); 2268 } 2269 2270 /*------------------------------------------------------------------------* 2271 * usbd_req_set_port_link_state 2272 * 2273 * USB 3.0 specific request 2274 * 2275 * Returns: 2276 * 0: Success 2277 * Else: Failure 2278 *------------------------------------------------------------------------*/ 2279 usb_error_t 2280 usbd_req_set_port_link_state(struct usb_device *udev, struct mtx *mtx, 2281 uint8_t port, uint8_t link_state) 2282 { 2283 struct usb_device_request req; 2284 2285 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2286 req.bRequest = UR_SET_FEATURE; 2287 USETW(req.wValue, UHF_PORT_LINK_STATE); 2288 req.wIndex[0] = port; 2289 req.wIndex[1] = link_state; 2290 USETW(req.wLength, 0); 2291 return (usbd_do_request(udev, mtx, &req, 0)); 2292 } 2293 2294 /*------------------------------------------------------------------------* 2295 * usbd_req_set_lpm_info 2296 * 2297 * USB 2.0 specific request for Link Power Management. 2298 * 2299 * Returns: 2300 * 0: Success 2301 * USB_ERR_PENDING_REQUESTS: NYET 2302 * USB_ERR_TIMEOUT: TIMEOUT 2303 * USB_ERR_STALL: STALL 2304 * Else: Failure 2305 *------------------------------------------------------------------------*/ 2306 usb_error_t 2307 usbd_req_set_lpm_info(struct usb_device *udev, struct mtx *mtx, 2308 uint8_t port, uint8_t besl, uint8_t addr, uint8_t rwe) 2309 { 2310 struct usb_device_request req; 2311 usb_error_t err; 2312 uint8_t buf[1]; 2313 2314 req.bmRequestType = UT_WRITE_CLASS_OTHER; 2315 req.bRequest = UR_SET_AND_TEST; 2316 USETW(req.wValue, UHF_PORT_L1); 2317 req.wIndex[0] = (port & 0xF) | ((besl & 0xF) << 4); 2318 req.wIndex[1] = (addr & 0x7F) | (rwe ? 0x80 : 0x00); 2319 USETW(req.wLength, sizeof(buf)); 2320 2321 /* set default value in case of short transfer */ 2322 buf[0] = 0x00; 2323 2324 err = usbd_do_request(udev, mtx, &req, buf); 2325 if (err) 2326 return (err); 2327 2328 switch (buf[0]) { 2329 case 0x00: /* SUCCESS */ 2330 break; 2331 case 0x10: /* NYET */ 2332 err = USB_ERR_PENDING_REQUESTS; 2333 break; 2334 case 0x11: /* TIMEOUT */ 2335 err = USB_ERR_TIMEOUT; 2336 break; 2337 case 0x30: /* STALL */ 2338 err = USB_ERR_STALLED; 2339 break; 2340 default: /* reserved */ 2341 err = USB_ERR_IOERROR; 2342 break; 2343 } 2344 return (err); 2345 } 2346