xref: /freebsd/sys/dev/usb/usb_pf.c (revision 49b49cda41feabe3439f7318e8bf40e3896c7bf4)
1 /* $FreeBSD$ */
2 /*-
3  * Copyright (c) 1990, 1991, 1993
4  *	The Regents of the University of California.  All rights reserved.
5  *
6  * This code is derived from the Stanford/CMU enet packet filter,
7  * (net/enet.c) distributed as part of 4.3BSD, and code contributed
8  * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
9  * Berkeley Laboratory.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 4. Neither the name of the University nor the names of its contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  */
35 
36 #ifdef USB_GLOBAL_INCLUDE_FILE
37 #include USB_GLOBAL_INCLUDE_FILE
38 #else
39 #include <sys/param.h>
40 #include <sys/kernel.h>
41 #include <sys/bus.h>
42 #include <sys/fcntl.h>
43 #include <sys/malloc.h>
44 #include <sys/proc.h>
45 #include <sys/socket.h>
46 #include <sys/sockio.h>
47 #include <net/if.h>
48 #include <net/if_var.h>
49 #include <net/if_types.h>
50 #include <net/if_clone.h>
51 #include <net/bpf.h>
52 #include <sys/sysctl.h>
53 #include <net/route.h>
54 
55 #include <dev/usb/usb.h>
56 #include <dev/usb/usbdi.h>
57 #include <dev/usb/usb_busdma.h>
58 #include <dev/usb/usb_controller.h>
59 #include <dev/usb/usb_core.h>
60 #include <dev/usb/usb_process.h>
61 #include <dev/usb/usb_device.h>
62 #include <dev/usb/usb_bus.h>
63 #include <dev/usb/usb_pf.h>
64 #include <dev/usb/usb_transfer.h>
65 #endif			/* USB_GLOBAL_INCLUDE_FILE */
66 
67 static void usbpf_init(void *);
68 static void usbpf_uninit(void *);
69 static int usbpf_ioctl(struct ifnet *, u_long, caddr_t);
70 static int usbpf_clone_match(struct if_clone *, const char *);
71 static int usbpf_clone_create(struct if_clone *, char *, size_t, caddr_t);
72 static int usbpf_clone_destroy(struct if_clone *, struct ifnet *);
73 static struct usb_bus *usbpf_ifname2ubus(const char *);
74 static uint32_t usbpf_aggregate_xferflags(struct usb_xfer_flags *);
75 static uint32_t usbpf_aggregate_status(struct usb_xfer_flags_int *);
76 static int usbpf_xfer_frame_is_read(struct usb_xfer *, uint32_t);
77 static uint32_t usbpf_xfer_precompute_size(struct usb_xfer *, int);
78 
79 static struct if_clone *usbpf_cloner;
80 static const char usbusname[] = "usbus";
81 
82 SYSINIT(usbpf_init, SI_SUB_PSEUDO, SI_ORDER_MIDDLE, usbpf_init, NULL);
83 SYSUNINIT(usbpf_uninit, SI_SUB_PSEUDO, SI_ORDER_MIDDLE, usbpf_uninit, NULL);
84 
85 static void
86 usbpf_init(void *arg)
87 {
88 
89 	usbpf_cloner = if_clone_advanced(usbusname, 0, usbpf_clone_match,
90 	    usbpf_clone_create, usbpf_clone_destroy);
91 }
92 
93 static void
94 usbpf_uninit(void *arg)
95 {
96 	int devlcnt;
97 	device_t *devlp;
98 	devclass_t dc;
99 	struct usb_bus *ubus;
100 	int error;
101 	int i;
102 
103 	if_clone_detach(usbpf_cloner);
104 
105 	dc = devclass_find(usbusname);
106 	if (dc == NULL)
107 		return;
108 	error = devclass_get_devices(dc, &devlp, &devlcnt);
109 	if (error)
110 		return;
111 	for (i = 0; i < devlcnt; i++) {
112 		ubus = device_get_softc(devlp[i]);
113 		if (ubus != NULL && ubus->ifp != NULL)
114 			usbpf_clone_destroy(usbpf_cloner, ubus->ifp);
115 	}
116 	free(devlp, M_TEMP);
117 }
118 
119 static int
120 usbpf_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
121 {
122 
123 	/* No configuration allowed. */
124 	return (EINVAL);
125 }
126 
127 static struct usb_bus *
128 usbpf_ifname2ubus(const char *ifname)
129 {
130 	device_t dev;
131 	devclass_t dc;
132 	int unit;
133 	int error;
134 
135 	if (strncmp(ifname, usbusname, sizeof(usbusname) - 1) != 0)
136 		return (NULL);
137 	error = ifc_name2unit(ifname, &unit);
138 	if (error || unit < 0)
139 		return (NULL);
140 	dc = devclass_find(usbusname);
141 	if (dc == NULL)
142 		return (NULL);
143 	dev = devclass_get_device(dc, unit);
144 	if (dev == NULL)
145 		return (NULL);
146 
147 	return (device_get_softc(dev));
148 }
149 
150 static int
151 usbpf_clone_match(struct if_clone *ifc, const char *name)
152 {
153 	struct usb_bus *ubus;
154 
155 	ubus = usbpf_ifname2ubus(name);
156 	if (ubus == NULL)
157 		return (0);
158 	if (ubus->ifp != NULL)
159 		return (0);
160 
161 	return (1);
162 }
163 
164 static int
165 usbpf_clone_create(struct if_clone *ifc, char *name, size_t len, caddr_t params)
166 {
167 	int error;
168 	int unit;
169 	struct ifnet *ifp;
170 	struct usb_bus *ubus;
171 
172 	error = ifc_name2unit(name, &unit);
173 	if (error)
174 		return (error);
175  	if (unit < 0)
176 		return (EINVAL);
177 
178 	ubus = usbpf_ifname2ubus(name);
179 	if (ubus == NULL)
180 		return (1);
181 	if (ubus->ifp != NULL)
182 		return (1);
183 
184 	error = ifc_alloc_unit(ifc, &unit);
185 	if (error) {
186 		device_printf(ubus->parent, "usbpf: Could not allocate "
187 		    "instance\n");
188 		return (error);
189 	}
190 	ifp = ubus->ifp = if_alloc(IFT_USB);
191 	if (ifp == NULL) {
192 		ifc_free_unit(ifc, unit);
193 		device_printf(ubus->parent, "usbpf: Could not allocate "
194 		    "instance\n");
195 		return (ENOSPC);
196 	}
197 	strlcpy(ifp->if_xname, name, sizeof(ifp->if_xname));
198 	ifp->if_softc = ubus;
199 	ifp->if_dname = usbusname;
200 	ifp->if_dunit = unit;
201 	ifp->if_ioctl = usbpf_ioctl;
202 	if_attach(ifp);
203 	ifp->if_flags |= IFF_UP;
204 	rt_ifmsg(ifp);
205 	/*
206 	 * XXX According to the specification of DLT_USB, it indicates
207 	 * packets beginning with USB setup header. But not sure all
208 	 * packets would be.
209 	 */
210 	bpfattach(ifp, DLT_USB, USBPF_HDR_LEN);
211 
212 	return (0);
213 }
214 
215 static int
216 usbpf_clone_destroy(struct if_clone *ifc, struct ifnet *ifp)
217 {
218 	struct usb_bus *ubus;
219 	int unit;
220 
221 	ubus = ifp->if_softc;
222 	unit = ifp->if_dunit;
223 
224 	/*
225 	 * Lock USB before clearing the "ifp" pointer, to avoid
226 	 * clearing the pointer in the middle of a TAP operation:
227 	 */
228 	USB_BUS_LOCK(ubus);
229 	ubus->ifp = NULL;
230 	USB_BUS_UNLOCK(ubus);
231 	bpfdetach(ifp);
232 	if_detach(ifp);
233 	if_free(ifp);
234 	ifc_free_unit(ifc, unit);
235 
236 	return (0);
237 }
238 
239 void
240 usbpf_attach(struct usb_bus *ubus)
241 {
242 
243 	if (bootverbose)
244 		device_printf(ubus->parent, "usbpf: Attached\n");
245 }
246 
247 void
248 usbpf_detach(struct usb_bus *ubus)
249 {
250 
251 	if (ubus->ifp != NULL)
252 		usbpf_clone_destroy(usbpf_cloner, ubus->ifp);
253 	if (bootverbose)
254 		device_printf(ubus->parent, "usbpf: Detached\n");
255 }
256 
257 static uint32_t
258 usbpf_aggregate_xferflags(struct usb_xfer_flags *flags)
259 {
260 	uint32_t val = 0;
261 
262 	if (flags->force_short_xfer == 1)
263 		val |= USBPF_FLAG_FORCE_SHORT_XFER;
264 	if (flags->short_xfer_ok == 1)
265 		val |= USBPF_FLAG_SHORT_XFER_OK;
266 	if (flags->short_frames_ok == 1)
267 		val |= USBPF_FLAG_SHORT_FRAMES_OK;
268 	if (flags->pipe_bof == 1)
269 		val |= USBPF_FLAG_PIPE_BOF;
270 	if (flags->proxy_buffer == 1)
271 		val |= USBPF_FLAG_PROXY_BUFFER;
272 	if (flags->ext_buffer == 1)
273 		val |= USBPF_FLAG_EXT_BUFFER;
274 	if (flags->manual_status == 1)
275 		val |= USBPF_FLAG_MANUAL_STATUS;
276 	if (flags->no_pipe_ok == 1)
277 		val |= USBPF_FLAG_NO_PIPE_OK;
278 	if (flags->stall_pipe == 1)
279 		val |= USBPF_FLAG_STALL_PIPE;
280 	return (val);
281 }
282 
283 static uint32_t
284 usbpf_aggregate_status(struct usb_xfer_flags_int *flags)
285 {
286 	uint32_t val = 0;
287 
288 	if (flags->open == 1)
289 		val |= USBPF_STATUS_OPEN;
290 	if (flags->transferring == 1)
291 		val |= USBPF_STATUS_TRANSFERRING;
292 	if (flags->did_dma_delay == 1)
293 		val |= USBPF_STATUS_DID_DMA_DELAY;
294 	if (flags->did_close == 1)
295 		val |= USBPF_STATUS_DID_CLOSE;
296 	if (flags->draining == 1)
297 		val |= USBPF_STATUS_DRAINING;
298 	if (flags->started == 1)
299 		val |= USBPF_STATUS_STARTED;
300 	if (flags->bandwidth_reclaimed == 1)
301 		val |= USBPF_STATUS_BW_RECLAIMED;
302 	if (flags->control_xfr == 1)
303 		val |= USBPF_STATUS_CONTROL_XFR;
304 	if (flags->control_hdr == 1)
305 		val |= USBPF_STATUS_CONTROL_HDR;
306 	if (flags->control_act == 1)
307 		val |= USBPF_STATUS_CONTROL_ACT;
308 	if (flags->control_stall == 1)
309 		val |= USBPF_STATUS_CONTROL_STALL;
310 	if (flags->short_frames_ok == 1)
311 		val |= USBPF_STATUS_SHORT_FRAMES_OK;
312 	if (flags->short_xfer_ok == 1)
313 		val |= USBPF_STATUS_SHORT_XFER_OK;
314 #if USB_HAVE_BUSDMA
315 	if (flags->bdma_enable == 1)
316 		val |= USBPF_STATUS_BDMA_ENABLE;
317 	if (flags->bdma_no_post_sync == 1)
318 		val |= USBPF_STATUS_BDMA_NO_POST_SYNC;
319 	if (flags->bdma_setup == 1)
320 		val |= USBPF_STATUS_BDMA_SETUP;
321 #endif
322 	if (flags->isochronous_xfr == 1)
323 		val |= USBPF_STATUS_ISOCHRONOUS_XFR;
324 	if (flags->curr_dma_set == 1)
325 		val |= USBPF_STATUS_CURR_DMA_SET;
326 	if (flags->can_cancel_immed == 1)
327 		val |= USBPF_STATUS_CAN_CANCEL_IMMED;
328 	if (flags->doing_callback == 1)
329 		val |= USBPF_STATUS_DOING_CALLBACK;
330 
331 	return (val);
332 }
333 
334 static int
335 usbpf_xfer_frame_is_read(struct usb_xfer *xfer, uint32_t frame)
336 {
337 	int isread;
338 
339 	if ((frame == 0) && (xfer->flags_int.control_xfr != 0) &&
340 	    (xfer->flags_int.control_hdr != 0)) {
341 		/* special case */
342 		if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
343 			/* The device controller writes to memory */
344 			isread = 1;
345 		} else {
346 			/* The host controller reads from memory */
347 			isread = 0;
348 		}
349 	} else {
350 		isread = USB_GET_DATA_ISREAD(xfer);
351 	}
352 	return (isread);
353 }
354 
355 static uint32_t
356 usbpf_xfer_precompute_size(struct usb_xfer *xfer, int type)
357 {
358 	uint32_t totlen;
359 	uint32_t x;
360 	uint32_t nframes;
361 
362 	if (type == USBPF_XFERTAP_SUBMIT)
363 		nframes = xfer->nframes;
364 	else
365 		nframes = xfer->aframes;
366 
367 	totlen = USBPF_HDR_LEN + (USBPF_FRAME_HDR_LEN * nframes);
368 
369 	/* precompute all trace lengths */
370 	for (x = 0; x != nframes; x++) {
371 		if (usbpf_xfer_frame_is_read(xfer, x)) {
372 			if (type != USBPF_XFERTAP_SUBMIT) {
373 				totlen += USBPF_FRAME_ALIGN(
374 				    xfer->frlengths[x]);
375 			}
376 		} else {
377 			if (type == USBPF_XFERTAP_SUBMIT) {
378 				totlen += USBPF_FRAME_ALIGN(
379 				    xfer->frlengths[x]);
380 			}
381 		}
382 	}
383 	return (totlen);
384 }
385 
386 void
387 usbpf_xfertap(struct usb_xfer *xfer, int type)
388 {
389 	struct usb_bus *bus;
390 	struct usbpf_pkthdr *up;
391 	struct usbpf_framehdr *uf;
392 	usb_frlength_t offset;
393 	uint32_t totlen;
394 	uint32_t frame;
395 	uint32_t temp;
396 	uint32_t nframes;
397 	uint32_t x;
398 	uint8_t *buf;
399 	uint8_t *ptr;
400 
401 	bus = xfer->xroot->bus;
402 
403 	/* sanity checks */
404 	if (bus->ifp == NULL || bus->ifp->if_bpf == NULL)
405 		return;
406 	if (!bpf_peers_present(bus->ifp->if_bpf))
407 		return;
408 
409 	totlen = usbpf_xfer_precompute_size(xfer, type);
410 
411 	if (type == USBPF_XFERTAP_SUBMIT)
412 		nframes = xfer->nframes;
413 	else
414 		nframes = xfer->aframes;
415 
416 	/*
417 	 * XXX TODO XXX
418 	 *
419 	 * When BPF supports it we could pass a fragmented array of
420 	 * buffers avoiding the data copy operation here.
421 	 */
422 	buf = ptr = malloc(totlen, M_TEMP, M_NOWAIT);
423 	if (buf == NULL) {
424 		device_printf(bus->parent, "usbpf: Out of memory\n");
425 		return;
426 	}
427 
428 	up = (struct usbpf_pkthdr *)ptr;
429 	ptr += USBPF_HDR_LEN;
430 
431 	/* fill out header */
432 	temp = device_get_unit(bus->bdev);
433 	up->up_totlen = htole32(totlen);
434 	up->up_busunit = htole32(temp);
435 	up->up_address = xfer->xroot->udev->device_index;
436 	if (xfer->flags_int.usb_mode == USB_MODE_DEVICE)
437 		up->up_mode = USBPF_MODE_DEVICE;
438 	else
439 		up->up_mode = USBPF_MODE_HOST;
440 	up->up_type = type;
441 	up->up_xfertype = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE;
442 	temp = usbpf_aggregate_xferflags(&xfer->flags);
443 	up->up_flags = htole32(temp);
444 	temp = usbpf_aggregate_status(&xfer->flags_int);
445 	up->up_status = htole32(temp);
446 	temp = xfer->error;
447 	up->up_error = htole32(temp);
448 	temp = xfer->interval;
449 	up->up_interval = htole32(temp);
450 	up->up_frames = htole32(nframes);
451 	temp = xfer->max_packet_size;
452 	up->up_packet_size = htole32(temp);
453 	temp = xfer->max_packet_count;
454 	up->up_packet_count = htole32(temp);
455 	temp = xfer->endpointno;
456 	up->up_endpoint = htole32(temp);
457 	up->up_speed = xfer->xroot->udev->speed;
458 
459 	/* clear reserved area */
460 	memset(up->up_reserved, 0, sizeof(up->up_reserved));
461 
462 	/* init offset and frame */
463 	offset = 0;
464 	frame = 0;
465 
466 	/* iterate all the USB frames and copy data, if any */
467 	for (x = 0; x != nframes; x++) {
468 		uint32_t length;
469 		int isread;
470 
471 		/* get length */
472 		length = xfer->frlengths[x];
473 
474 		/* get frame header pointer */
475 		uf = (struct usbpf_framehdr *)ptr;
476 		ptr += USBPF_FRAME_HDR_LEN;
477 
478 		/* fill out packet header */
479 		uf->length = htole32(length);
480 		uf->flags = 0;
481 
482 		/* get information about data read/write */
483 		isread = usbpf_xfer_frame_is_read(xfer, x);
484 
485 		/* check if we need to copy any data */
486 		if (isread) {
487 			if (type == USBPF_XFERTAP_SUBMIT)
488 				length = 0;
489 			else {
490 				uf->flags |= htole32(
491 				    USBPF_FRAMEFLAG_DATA_FOLLOWS);
492 			}
493 		} else {
494 			if (type != USBPF_XFERTAP_SUBMIT)
495 				length = 0;
496 			else {
497 				uf->flags |= htole32(
498 				    USBPF_FRAMEFLAG_DATA_FOLLOWS);
499 			}
500 		}
501 
502 		/* check if data is read direction */
503 		if (isread)
504 			uf->flags |= htole32(USBPF_FRAMEFLAG_READ);
505 
506 		/* copy USB data, if any */
507 		if (length != 0) {
508 			/* copy data */
509 			usbd_copy_out(&xfer->frbuffers[frame],
510 			    offset, ptr, length);
511 
512 			/* align length */
513 			temp = USBPF_FRAME_ALIGN(length);
514 
515 			/* zero pad */
516 			if (temp != length)
517 				memset(ptr + length, 0, temp - length);
518 
519 			ptr += temp;
520 		}
521 
522 		if (xfer->flags_int.isochronous_xfr) {
523 			offset += usbd_xfer_old_frame_length(xfer, x);
524 		} else {
525 			frame ++;
526 		}
527 	}
528 
529 	bpf_tap(bus->ifp->if_bpf, buf, totlen);
530 
531 	free(buf, M_TEMP);
532 }
533