1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5 * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 31 */ 32 33 #include <sys/stdint.h> 34 #include <sys/stddef.h> 35 #include <sys/param.h> 36 #include <sys/queue.h> 37 #include <sys/types.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/linker_set.h> 42 #include <sys/module.h> 43 #include <sys/lock.h> 44 #include <sys/mutex.h> 45 #include <sys/condvar.h> 46 #include <sys/sysctl.h> 47 #include <sys/sx.h> 48 #include <sys/unistd.h> 49 #include <sys/callout.h> 50 #include <sys/malloc.h> 51 #include <sys/priv.h> 52 53 #include <dev/usb/usb.h> 54 #include <dev/usb/usb_ioctl.h> 55 #include <dev/usb/usbdi.h> 56 #include <dev/usb/usbdi_util.h> 57 58 #define USB_DEBUG_VAR uhub_debug 59 60 #include <dev/usb/usb_core.h> 61 #include <dev/usb/usb_process.h> 62 #include <dev/usb/usb_device.h> 63 #include <dev/usb/usb_request.h> 64 #include <dev/usb/usb_debug.h> 65 #include <dev/usb/usb_hub.h> 66 #include <dev/usb/usb_util.h> 67 #include <dev/usb/usb_busdma.h> 68 #include <dev/usb/usb_transfer.h> 69 #include <dev/usb/usb_dynamic.h> 70 71 #include <dev/usb/usb_controller.h> 72 #include <dev/usb/usb_bus.h> 73 74 #define UHUB_INTR_INTERVAL 250 /* ms */ 75 #define UHUB_N_TRANSFER 1 76 77 #ifdef USB_DEBUG 78 static int uhub_debug = 0; 79 80 SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB"); 81 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RW, &uhub_debug, 0, 82 "Debug level"); 83 84 TUNABLE_INT("hw.usb.uhub.debug", &uhub_debug); 85 #endif 86 87 #if USB_HAVE_POWERD 88 static int usb_power_timeout = 30; /* seconds */ 89 90 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RW, 91 &usb_power_timeout, 0, "USB power timeout"); 92 #endif 93 94 struct uhub_current_state { 95 uint16_t port_change; 96 uint16_t port_status; 97 }; 98 99 struct uhub_softc { 100 struct uhub_current_state sc_st;/* current state */ 101 device_t sc_dev; /* base device */ 102 struct mtx sc_mtx; /* our mutex */ 103 struct usb_device *sc_udev; /* USB device */ 104 struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */ 105 uint8_t sc_flags; 106 #define UHUB_FLAG_DID_EXPLORE 0x01 107 char sc_name[32]; 108 }; 109 110 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 111 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 112 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 113 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 114 115 /* prototypes for type checking: */ 116 117 static device_probe_t uhub_probe; 118 static device_attach_t uhub_attach; 119 static device_detach_t uhub_detach; 120 static device_suspend_t uhub_suspend; 121 static device_resume_t uhub_resume; 122 123 static bus_driver_added_t uhub_driver_added; 124 static bus_child_location_str_t uhub_child_location_string; 125 static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string; 126 127 static usb_callback_t uhub_intr_callback; 128 129 static void usb_dev_resume_peer(struct usb_device *udev); 130 static void usb_dev_suspend_peer(struct usb_device *udev); 131 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 132 133 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 134 135 [0] = { 136 .type = UE_INTERRUPT, 137 .endpoint = UE_ADDR_ANY, 138 .direction = UE_DIR_ANY, 139 .timeout = 0, 140 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 141 .bufsize = 0, /* use wMaxPacketSize */ 142 .callback = &uhub_intr_callback, 143 .interval = UHUB_INTR_INTERVAL, 144 }, 145 }; 146 147 /* 148 * driver instance for "hub" connected to "usb" 149 * and "hub" connected to "hub" 150 */ 151 static devclass_t uhub_devclass; 152 153 static device_method_t uhub_methods[] = { 154 DEVMETHOD(device_probe, uhub_probe), 155 DEVMETHOD(device_attach, uhub_attach), 156 DEVMETHOD(device_detach, uhub_detach), 157 158 DEVMETHOD(device_suspend, uhub_suspend), 159 DEVMETHOD(device_resume, uhub_resume), 160 161 DEVMETHOD(bus_child_location_str, uhub_child_location_string), 162 DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string), 163 DEVMETHOD(bus_driver_added, uhub_driver_added), 164 {0, 0} 165 }; 166 167 static driver_t uhub_driver = { 168 .name = "uhub", 169 .methods = uhub_methods, 170 .size = sizeof(struct uhub_softc) 171 }; 172 173 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); 174 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); 175 MODULE_VERSION(uhub, 1); 176 177 static void 178 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 179 { 180 struct uhub_softc *sc = usbd_xfer_softc(xfer); 181 182 switch (USB_GET_STATE(xfer)) { 183 case USB_ST_TRANSFERRED: 184 DPRINTFN(2, "\n"); 185 /* 186 * This is an indication that some port 187 * has changed status. Notify the bus 188 * event handler thread that we need 189 * to be explored again: 190 */ 191 usb_needs_explore(sc->sc_udev->bus, 0); 192 193 case USB_ST_SETUP: 194 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 195 usbd_transfer_submit(xfer); 196 break; 197 198 default: /* Error */ 199 if (xfer->error != USB_ERR_CANCELLED) { 200 /* 201 * Do a clear-stall. The "stall_pipe" flag 202 * will get cleared before next callback by 203 * the USB stack. 204 */ 205 usbd_xfer_set_stall(xfer); 206 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 207 usbd_transfer_submit(xfer); 208 } 209 break; 210 } 211 } 212 213 /*------------------------------------------------------------------------* 214 * uhub_explore_sub - subroutine 215 * 216 * Return values: 217 * 0: Success 218 * Else: A control transaction failed 219 *------------------------------------------------------------------------*/ 220 static usb_error_t 221 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 222 { 223 struct usb_bus *bus; 224 struct usb_device *child; 225 uint8_t refcount; 226 usb_error_t err; 227 228 bus = sc->sc_udev->bus; 229 err = 0; 230 231 /* get driver added refcount from USB bus */ 232 refcount = bus->driver_added_refcount; 233 234 /* get device assosiated with the given port */ 235 child = usb_bus_port_get_device(bus, up); 236 if (child == NULL) { 237 /* nothing to do */ 238 goto done; 239 } 240 241 /* check if device should be re-enumerated */ 242 243 if (child->flags.usb_mode == USB_MODE_HOST) { 244 usbd_enum_lock(child); 245 if (child->re_enumerate_wait) { 246 err = usbd_set_config_index(child, USB_UNCONFIG_INDEX); 247 if (err == 0) 248 err = usbd_req_re_enumerate(child, NULL); 249 if (err == 0) 250 err = usbd_set_config_index(child, 0); 251 if (err == 0) { 252 err = usb_probe_and_attach(child, 253 USB_IFACE_INDEX_ANY); 254 } 255 child->re_enumerate_wait = 0; 256 err = 0; 257 } 258 usbd_enum_unlock(child); 259 } 260 261 /* check if probe and attach should be done */ 262 263 if (child->driver_added_refcount != refcount) { 264 child->driver_added_refcount = refcount; 265 err = usb_probe_and_attach(child, 266 USB_IFACE_INDEX_ANY); 267 if (err) { 268 goto done; 269 } 270 } 271 /* start control transfer, if device mode */ 272 273 if (child->flags.usb_mode == USB_MODE_DEVICE) 274 usbd_ctrl_transfer_setup(child); 275 276 /* if a HUB becomes present, do a recursive HUB explore */ 277 278 if (child->hub) 279 err = (child->hub->explore) (child); 280 281 done: 282 return (err); 283 } 284 285 /*------------------------------------------------------------------------* 286 * uhub_read_port_status - factored out code 287 *------------------------------------------------------------------------*/ 288 static usb_error_t 289 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 290 { 291 struct usb_port_status ps; 292 usb_error_t err; 293 294 err = usbd_req_get_port_status( 295 sc->sc_udev, NULL, &ps, portno); 296 297 /* update status regardless of error */ 298 299 sc->sc_st.port_status = UGETW(ps.wPortStatus); 300 sc->sc_st.port_change = UGETW(ps.wPortChange); 301 302 /* debugging print */ 303 304 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 305 "wPortChange=0x%04x, err=%s\n", 306 portno, sc->sc_st.port_status, 307 sc->sc_st.port_change, usbd_errstr(err)); 308 return (err); 309 } 310 311 /*------------------------------------------------------------------------* 312 * uhub_reattach_port 313 * 314 * Returns: 315 * 0: Success 316 * Else: A control transaction failed 317 *------------------------------------------------------------------------*/ 318 static usb_error_t 319 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 320 { 321 struct usb_device *child; 322 struct usb_device *udev; 323 enum usb_dev_speed speed; 324 enum usb_hc_mode mode; 325 usb_error_t err; 326 uint8_t timeout; 327 328 DPRINTF("reattaching port %d\n", portno); 329 330 err = 0; 331 timeout = 0; 332 udev = sc->sc_udev; 333 child = usb_bus_port_get_device(udev->bus, 334 udev->hub->ports + portno - 1); 335 336 repeat: 337 338 /* first clear the port connection change bit */ 339 340 err = usbd_req_clear_port_feature(udev, NULL, 341 portno, UHF_C_PORT_CONNECTION); 342 343 if (err) { 344 goto error; 345 } 346 /* check if there is a child */ 347 348 if (child != NULL) { 349 /* 350 * Free USB device and all subdevices, if any. 351 */ 352 usb_free_device(child, 0); 353 child = NULL; 354 } 355 /* get fresh status */ 356 357 err = uhub_read_port_status(sc, portno); 358 if (err) { 359 goto error; 360 } 361 /* check if nothing is connected to the port */ 362 363 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) { 364 goto error; 365 } 366 /* check if there is no power on the port and print a warning */ 367 368 if (!(sc->sc_st.port_status & UPS_PORT_POWER)) { 369 DPRINTF("WARNING: strange, connected port %d " 370 "has no power\n", portno); 371 } 372 /* check if the device is in Host Mode */ 373 374 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 375 376 DPRINTF("Port %d is in Host Mode\n", portno); 377 378 if (sc->sc_st.port_status & UPS_SUSPEND) { 379 /* 380 * NOTE: Should not get here in SuperSpeed 381 * mode, because the HUB should report this 382 * bit as zero. 383 */ 384 DPRINTF("Port %d was still " 385 "suspended, clearing.\n", portno); 386 err = usbd_req_clear_port_feature(udev, 387 NULL, portno, UHF_PORT_SUSPEND); 388 } 389 390 /* USB Host Mode */ 391 392 /* wait for maximum device power up time */ 393 394 usb_pause_mtx(NULL, 395 USB_MS_TO_TICKS(USB_PORT_POWERUP_DELAY)); 396 397 /* reset port, which implies enabling it */ 398 399 err = usbd_req_reset_port(udev, NULL, portno); 400 401 if (err) { 402 DPRINTFN(0, "port %d reset " 403 "failed, error=%s\n", 404 portno, usbd_errstr(err)); 405 goto error; 406 } 407 /* get port status again, it might have changed during reset */ 408 409 err = uhub_read_port_status(sc, portno); 410 if (err) { 411 goto error; 412 } 413 /* check if something changed during port reset */ 414 415 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 416 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 417 if (timeout) { 418 DPRINTFN(0, "giving up port reset " 419 "- device vanished\n"); 420 goto error; 421 } 422 timeout = 1; 423 goto repeat; 424 } 425 } else { 426 DPRINTF("Port %d is in Device Mode\n", portno); 427 } 428 429 /* 430 * Figure out the device speed 431 */ 432 switch (udev->speed) { 433 case USB_SPEED_HIGH: 434 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 435 speed = USB_SPEED_HIGH; 436 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 437 speed = USB_SPEED_LOW; 438 else 439 speed = USB_SPEED_FULL; 440 break; 441 case USB_SPEED_FULL: 442 if (sc->sc_st.port_status & UPS_LOW_SPEED) 443 speed = USB_SPEED_LOW; 444 else 445 speed = USB_SPEED_FULL; 446 break; 447 case USB_SPEED_LOW: 448 speed = USB_SPEED_LOW; 449 break; 450 case USB_SPEED_SUPER: 451 if (udev->parent_hub == NULL) { 452 /* Root HUB - special case */ 453 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 454 case 0: 455 speed = USB_SPEED_FULL; 456 break; 457 case UPS_LOW_SPEED: 458 speed = USB_SPEED_LOW; 459 break; 460 case UPS_HIGH_SPEED: 461 speed = USB_SPEED_HIGH; 462 break; 463 default: 464 speed = USB_SPEED_SUPER; 465 break; 466 } 467 } else { 468 speed = USB_SPEED_SUPER; 469 } 470 break; 471 default: 472 /* same speed like parent */ 473 speed = udev->speed; 474 break; 475 } 476 if (speed == USB_SPEED_SUPER) { 477 err = usbd_req_set_hub_u1_timeout(udev, NULL, 478 portno, 128 - (2 * udev->depth)); 479 if (err) { 480 DPRINTFN(0, "port %d U1 timeout " 481 "failed, error=%s\n", 482 portno, usbd_errstr(err)); 483 } 484 err = usbd_req_set_hub_u2_timeout(udev, NULL, 485 portno, 128 - (2 * udev->depth)); 486 if (err) { 487 DPRINTFN(0, "port %d U2 timeout " 488 "failed, error=%s\n", 489 portno, usbd_errstr(err)); 490 } 491 } 492 493 /* 494 * Figure out the device mode 495 * 496 * NOTE: This part is currently FreeBSD specific. 497 */ 498 if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 499 mode = USB_MODE_DEVICE; 500 else 501 mode = USB_MODE_HOST; 502 503 /* need to create a new child */ 504 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 505 udev->depth + 1, portno - 1, portno, speed, mode); 506 if (child == NULL) { 507 DPRINTFN(0, "could not allocate new device\n"); 508 goto error; 509 } 510 return (0); /* success */ 511 512 error: 513 if (child != NULL) { 514 /* 515 * Free USB device and all subdevices, if any. 516 */ 517 usb_free_device(child, 0); 518 child = NULL; 519 } 520 if (err == 0) { 521 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 522 err = usbd_req_clear_port_feature( 523 sc->sc_udev, NULL, 524 portno, UHF_PORT_ENABLE); 525 } 526 } 527 if (err) { 528 DPRINTFN(0, "device problem (%s), " 529 "disabling port %d\n", usbd_errstr(err), portno); 530 } 531 return (err); 532 } 533 534 /*------------------------------------------------------------------------* 535 * usb_device_20_compatible 536 * 537 * Returns: 538 * 0: HUB does not support suspend and resume 539 * Else: HUB supports suspend and resume 540 *------------------------------------------------------------------------*/ 541 static uint8_t 542 usb_device_20_compatible(struct usb_device *udev) 543 { 544 if (udev == NULL) 545 return (0); 546 switch (udev->speed) { 547 case USB_SPEED_LOW: 548 case USB_SPEED_FULL: 549 case USB_SPEED_HIGH: 550 return (1); 551 default: 552 return (0); 553 } 554 } 555 556 /*------------------------------------------------------------------------* 557 * uhub_suspend_resume_port 558 * 559 * Returns: 560 * 0: Success 561 * Else: A control transaction failed 562 *------------------------------------------------------------------------*/ 563 static usb_error_t 564 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 565 { 566 struct usb_device *child; 567 struct usb_device *udev; 568 uint8_t is_suspend; 569 usb_error_t err; 570 571 DPRINTF("port %d\n", portno); 572 573 udev = sc->sc_udev; 574 child = usb_bus_port_get_device(udev->bus, 575 udev->hub->ports + portno - 1); 576 577 /* first clear the port suspend change bit */ 578 579 if (usb_device_20_compatible(udev)) { 580 err = usbd_req_clear_port_feature(udev, NULL, 581 portno, UHF_C_PORT_SUSPEND); 582 } else { 583 err = usbd_req_clear_port_feature(udev, NULL, 584 portno, UHF_C_PORT_LINK_STATE); 585 } 586 587 if (err) { 588 DPRINTF("clearing suspend failed.\n"); 589 goto done; 590 } 591 /* get fresh status */ 592 593 err = uhub_read_port_status(sc, portno); 594 if (err) { 595 DPRINTF("reading port status failed.\n"); 596 goto done; 597 } 598 /* convert current state */ 599 600 if (usb_device_20_compatible(udev)) { 601 if (sc->sc_st.port_status & UPS_SUSPEND) { 602 is_suspend = 1; 603 } else { 604 is_suspend = 0; 605 } 606 } else { 607 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 608 case UPS_PORT_LS_U0: 609 case UPS_PORT_LS_U1: 610 is_suspend = 0; 611 break; 612 default: 613 is_suspend = 1; 614 break; 615 } 616 } 617 618 DPRINTF("suspended=%u\n", is_suspend); 619 620 /* do the suspend or resume */ 621 622 if (child) { 623 /* 624 * This code handle two cases: 1) Host Mode - we can only 625 * receive resume here 2) Device Mode - we can receive 626 * suspend and resume here 627 */ 628 if (is_suspend == 0) 629 usb_dev_resume_peer(child); 630 else if ((child->flags.usb_mode == USB_MODE_DEVICE) || 631 (usb_device_20_compatible(child) == 0)) 632 usb_dev_suspend_peer(child); 633 } 634 done: 635 return (err); 636 } 637 638 /*------------------------------------------------------------------------* 639 * uhub_root_interrupt 640 * 641 * This function is called when a Root HUB interrupt has 642 * happened. "ptr" and "len" makes up the Root HUB interrupt 643 * packet. This function is called having the "bus_mtx" locked. 644 *------------------------------------------------------------------------*/ 645 void 646 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) 647 { 648 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 649 650 usb_needs_explore(bus, 0); 651 } 652 653 static uint8_t 654 uhub_is_too_deep(struct usb_device *udev) 655 { 656 switch (udev->speed) { 657 case USB_SPEED_FULL: 658 case USB_SPEED_LOW: 659 case USB_SPEED_HIGH: 660 if (udev->depth > USB_HUB_MAX_DEPTH) 661 return (1); 662 break; 663 case USB_SPEED_SUPER: 664 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 665 return (1); 666 break; 667 default: 668 break; 669 } 670 return (0); 671 } 672 673 /*------------------------------------------------------------------------* 674 * uhub_explore 675 * 676 * Returns: 677 * 0: Success 678 * Else: Failure 679 *------------------------------------------------------------------------*/ 680 static usb_error_t 681 uhub_explore(struct usb_device *udev) 682 { 683 struct usb_hub *hub; 684 struct uhub_softc *sc; 685 struct usb_port *up; 686 usb_error_t err; 687 uint8_t portno; 688 uint8_t x; 689 690 hub = udev->hub; 691 sc = hub->hubsoftc; 692 693 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 694 695 /* ignore devices that are too deep */ 696 if (uhub_is_too_deep(udev)) 697 return (USB_ERR_TOO_DEEP); 698 699 /* check if device is suspended */ 700 if (udev->flags.self_suspended) { 701 /* need to wait until the child signals resume */ 702 DPRINTF("Device is suspended!\n"); 703 return (0); 704 } 705 for (x = 0; x != hub->nports; x++) { 706 up = hub->ports + x; 707 portno = x + 1; 708 709 err = uhub_read_port_status(sc, portno); 710 if (err) { 711 /* most likely the HUB is gone */ 712 break; 713 } 714 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 715 DPRINTF("Overcurrent on port %u.\n", portno); 716 err = usbd_req_clear_port_feature( 717 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 718 if (err) { 719 /* most likely the HUB is gone */ 720 break; 721 } 722 } 723 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 724 /* 725 * Fake a connect status change so that the 726 * status gets checked initially! 727 */ 728 sc->sc_st.port_change |= 729 UPS_C_CONNECT_STATUS; 730 } 731 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 732 err = usbd_req_clear_port_feature( 733 udev, NULL, portno, UHF_C_PORT_ENABLE); 734 if (err) { 735 /* most likely the HUB is gone */ 736 break; 737 } 738 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 739 /* 740 * Ignore the port error if the device 741 * has vanished ! 742 */ 743 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 744 DPRINTFN(0, "illegal enable change, " 745 "port %d\n", portno); 746 } else { 747 748 if (up->restartcnt == USB_RESTART_MAX) { 749 /* XXX could try another speed ? */ 750 DPRINTFN(0, "port error, giving up " 751 "port %d\n", portno); 752 } else { 753 sc->sc_st.port_change |= 754 UPS_C_CONNECT_STATUS; 755 up->restartcnt++; 756 } 757 } 758 } 759 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 760 err = uhub_reattach_port(sc, portno); 761 if (err) { 762 /* most likely the HUB is gone */ 763 break; 764 } 765 } 766 if (sc->sc_st.port_change & (UPS_C_SUSPEND | UPS_C_PORT_LINK_STATE)) { 767 err = uhub_suspend_resume_port(sc, portno); 768 if (err) { 769 /* most likely the HUB is gone */ 770 break; 771 } 772 } 773 err = uhub_explore_sub(sc, up); 774 if (err) { 775 /* no device(s) present */ 776 continue; 777 } 778 /* explore succeeded - reset restart counter */ 779 up->restartcnt = 0; 780 } 781 782 /* initial status checked */ 783 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 784 785 /* return success */ 786 return (USB_ERR_NORMAL_COMPLETION); 787 } 788 789 static int 790 uhub_probe(device_t dev) 791 { 792 struct usb_attach_arg *uaa = device_get_ivars(dev); 793 794 if (uaa->usb_mode != USB_MODE_HOST) 795 return (ENXIO); 796 797 /* 798 * The subclass for USB HUBs is currently ignored because it 799 * is 0 for some and 1 for others. 800 */ 801 if (uaa->info.bConfigIndex == 0 && 802 uaa->info.bDeviceClass == UDCLASS_HUB) 803 return (0); 804 805 return (ENXIO); 806 } 807 808 /* NOTE: The information returned by this function can be wrong. */ 809 usb_error_t 810 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 811 { 812 struct usb_hub_descriptor hubdesc20; 813 struct usb_hub_ss_descriptor hubdesc30; 814 usb_error_t err; 815 uint8_t nports; 816 uint8_t tt; 817 818 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 819 return (USB_ERR_INVAL); 820 821 nports = 0; 822 tt = 0; 823 824 switch (udev->speed) { 825 case USB_SPEED_LOW: 826 case USB_SPEED_FULL: 827 case USB_SPEED_HIGH: 828 /* assuming that there is one port */ 829 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 830 if (err) { 831 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 832 "error=%s\n", usbd_errstr(err)); 833 break; 834 } 835 nports = hubdesc20.bNbrPorts; 836 if (nports > 127) 837 nports = 127; 838 839 if (udev->speed == USB_SPEED_HIGH) 840 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 841 break; 842 843 case USB_SPEED_SUPER: 844 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 845 if (err) { 846 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 847 "error=%s\n", usbd_errstr(err)); 848 break; 849 } 850 nports = hubdesc30.bNbrPorts; 851 if (nports > 16) 852 nports = 16; 853 break; 854 855 default: 856 err = USB_ERR_INVAL; 857 break; 858 } 859 860 if (pnports != NULL) 861 *pnports = nports; 862 863 if (ptt != NULL) 864 *ptt = tt; 865 866 return (err); 867 } 868 869 static int 870 uhub_attach(device_t dev) 871 { 872 struct uhub_softc *sc = device_get_softc(dev); 873 struct usb_attach_arg *uaa = device_get_ivars(dev); 874 struct usb_device *udev = uaa->device; 875 struct usb_device *parent_hub = udev->parent_hub; 876 struct usb_hub *hub; 877 struct usb_hub_descriptor hubdesc20; 878 struct usb_hub_ss_descriptor hubdesc30; 879 uint16_t pwrdly; 880 uint8_t x; 881 uint8_t nports; 882 uint8_t portno; 883 uint8_t removable; 884 uint8_t iface_index; 885 usb_error_t err; 886 887 sc->sc_udev = udev; 888 sc->sc_dev = dev; 889 890 mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); 891 892 snprintf(sc->sc_name, sizeof(sc->sc_name), "%s", 893 device_get_nameunit(dev)); 894 895 device_set_usb_desc(dev); 896 897 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 898 "parent->selfpowered=%d\n", 899 udev->depth, 900 udev->flags.self_powered, 901 parent_hub, 902 parent_hub ? 903 parent_hub->flags.self_powered : 0); 904 905 if (uhub_is_too_deep(udev)) { 906 DPRINTFN(0, "HUB at depth %d, " 907 "exceeds maximum. HUB ignored\n", (int)udev->depth); 908 goto error; 909 } 910 911 if (!udev->flags.self_powered && parent_hub && 912 !parent_hub->flags.self_powered) { 913 DPRINTFN(0, "Bus powered HUB connected to " 914 "bus powered HUB. HUB ignored\n"); 915 goto error; 916 } 917 /* get HUB descriptor */ 918 919 DPRINTFN(2, "Getting HUB descriptor\n"); 920 921 switch (udev->speed) { 922 case USB_SPEED_LOW: 923 case USB_SPEED_FULL: 924 case USB_SPEED_HIGH: 925 /* assuming that there is one port */ 926 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 927 if (err) { 928 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 929 "error=%s\n", usbd_errstr(err)); 930 goto error; 931 } 932 /* get number of ports */ 933 nports = hubdesc20.bNbrPorts; 934 935 /* get power delay */ 936 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 937 USB_EXTRA_POWER_UP_TIME); 938 939 /* get complete HUB descriptor */ 940 if (nports >= 8) { 941 /* check number of ports */ 942 if (nports > 127) { 943 DPRINTFN(0, "Invalid number of USB 2.0 ports," 944 "error=%s\n", usbd_errstr(err)); 945 goto error; 946 } 947 /* get complete HUB descriptor */ 948 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 949 950 if (err) { 951 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 952 "error=%s\n", usbd_errstr(err)); 953 goto error; 954 } 955 if (hubdesc20.bNbrPorts != nports) { 956 DPRINTFN(0, "Number of ports changed\n"); 957 goto error; 958 } 959 } 960 break; 961 case USB_SPEED_SUPER: 962 if (udev->parent_hub != NULL) { 963 err = usbd_req_set_hub_depth(udev, NULL, 964 udev->depth - 1); 965 if (err) { 966 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 967 "error=%s\n", usbd_errstr(err)); 968 goto error; 969 } 970 } 971 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 972 if (err) { 973 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 974 "error=%s\n", usbd_errstr(err)); 975 goto error; 976 } 977 /* get number of ports */ 978 nports = hubdesc30.bNbrPorts; 979 980 /* get power delay */ 981 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 982 USB_EXTRA_POWER_UP_TIME); 983 984 /* get complete HUB descriptor */ 985 if (nports >= 8) { 986 /* check number of ports */ 987 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 988 DPRINTFN(0, "Invalid number of USB 3.0 ports," 989 "error=%s\n", usbd_errstr(err)); 990 goto error; 991 } 992 /* get complete HUB descriptor */ 993 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 994 995 if (err) { 996 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 997 "error=%s\n", usbd_errstr(err)); 998 goto error; 999 } 1000 if (hubdesc30.bNbrPorts != nports) { 1001 DPRINTFN(0, "Number of ports changed\n"); 1002 goto error; 1003 } 1004 } 1005 break; 1006 default: 1007 DPRINTF("Assuming HUB has only one port\n"); 1008 /* default number of ports */ 1009 nports = 1; 1010 /* default power delay */ 1011 pwrdly = ((10 * UHD_PWRON_FACTOR) + USB_EXTRA_POWER_UP_TIME); 1012 break; 1013 } 1014 if (nports == 0) { 1015 DPRINTFN(0, "portless HUB\n"); 1016 goto error; 1017 } 1018 hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1019 M_USBDEV, M_WAITOK | M_ZERO); 1020 1021 if (hub == NULL) { 1022 goto error; 1023 } 1024 udev->hub = hub; 1025 1026 #if USB_HAVE_TT_SUPPORT 1027 /* init FULL-speed ISOCHRONOUS schedule */ 1028 usbd_fs_isoc_schedule_init_all(hub->fs_isoc_schedule); 1029 #endif 1030 /* initialize HUB structure */ 1031 hub->hubsoftc = sc; 1032 hub->explore = &uhub_explore; 1033 hub->nports = nports; 1034 hub->hubudev = udev; 1035 1036 /* if self powered hub, give ports maximum current */ 1037 if (udev->flags.self_powered) { 1038 hub->portpower = USB_MAX_POWER; 1039 } else { 1040 hub->portpower = USB_MIN_POWER; 1041 } 1042 1043 /* set up interrupt pipe */ 1044 iface_index = 0; 1045 if (udev->parent_hub == NULL) { 1046 /* root HUB is special */ 1047 err = 0; 1048 } else { 1049 /* normal HUB */ 1050 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1051 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); 1052 } 1053 if (err) { 1054 DPRINTFN(0, "cannot setup interrupt transfer, " 1055 "errstr=%s\n", usbd_errstr(err)); 1056 goto error; 1057 } 1058 /* wait with power off for a while */ 1059 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1060 1061 /* 1062 * To have the best chance of success we do things in the exact same 1063 * order as Windoze98. This should not be necessary, but some 1064 * devices do not follow the USB specs to the letter. 1065 * 1066 * These are the events on the bus when a hub is attached: 1067 * Get device and config descriptors (see attach code) 1068 * Get hub descriptor (see above) 1069 * For all ports 1070 * turn on power 1071 * wait for power to become stable 1072 * (all below happens in explore code) 1073 * For all ports 1074 * clear C_PORT_CONNECTION 1075 * For all ports 1076 * get port status 1077 * if device connected 1078 * wait 100 ms 1079 * turn on reset 1080 * wait 1081 * clear C_PORT_RESET 1082 * get port status 1083 * proceed with device attachment 1084 */ 1085 1086 /* XXX should check for none, individual, or ganged power? */ 1087 1088 removable = 0; 1089 1090 for (x = 0; x != nports; x++) { 1091 /* set up data structures */ 1092 struct usb_port *up = hub->ports + x; 1093 1094 up->device_index = 0; 1095 up->restartcnt = 0; 1096 portno = x + 1; 1097 1098 /* check if port is removable */ 1099 switch (udev->speed) { 1100 case USB_SPEED_LOW: 1101 case USB_SPEED_FULL: 1102 case USB_SPEED_HIGH: 1103 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1104 removable++; 1105 break; 1106 case USB_SPEED_SUPER: 1107 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1108 removable++; 1109 break; 1110 default: 1111 DPRINTF("Assuming removable port\n"); 1112 removable++; 1113 break; 1114 } 1115 if (!err) { 1116 /* turn the power on */ 1117 err = usbd_req_set_port_feature(udev, NULL, 1118 portno, UHF_PORT_POWER); 1119 } 1120 if (err) { 1121 DPRINTFN(0, "port %d power on failed, %s\n", 1122 portno, usbd_errstr(err)); 1123 } 1124 DPRINTF("turn on port %d power\n", 1125 portno); 1126 1127 /* wait for stable power */ 1128 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1129 } 1130 1131 device_printf(dev, "%d port%s with %d " 1132 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1133 removable, udev->flags.self_powered ? "self" : "bus"); 1134 1135 /* Start the interrupt endpoint, if any */ 1136 1137 if (sc->sc_xfer[0] != NULL) { 1138 mtx_lock(&sc->sc_mtx); 1139 usbd_transfer_start(sc->sc_xfer[0]); 1140 mtx_unlock(&sc->sc_mtx); 1141 } 1142 1143 /* Enable automatic power save on all USB HUBs */ 1144 1145 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1146 1147 return (0); 1148 1149 error: 1150 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1151 1152 if (udev->hub) { 1153 free(udev->hub, M_USBDEV); 1154 udev->hub = NULL; 1155 } 1156 1157 mtx_destroy(&sc->sc_mtx); 1158 1159 return (ENXIO); 1160 } 1161 1162 /* 1163 * Called from process context when the hub is gone. 1164 * Detach all devices on active ports. 1165 */ 1166 static int 1167 uhub_detach(device_t dev) 1168 { 1169 struct uhub_softc *sc = device_get_softc(dev); 1170 struct usb_hub *hub = sc->sc_udev->hub; 1171 struct usb_device *child; 1172 uint8_t x; 1173 1174 if (hub == NULL) /* must be partially working */ 1175 return (0); 1176 1177 /* Make sure interrupt transfer is gone. */ 1178 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1179 1180 /* Detach all ports */ 1181 for (x = 0; x != hub->nports; x++) { 1182 1183 child = usb_bus_port_get_device(sc->sc_udev->bus, hub->ports + x); 1184 1185 if (child == NULL) { 1186 continue; 1187 } 1188 1189 /* 1190 * Free USB device and all subdevices, if any. 1191 */ 1192 usb_free_device(child, 0); 1193 } 1194 1195 free(hub, M_USBDEV); 1196 sc->sc_udev->hub = NULL; 1197 1198 mtx_destroy(&sc->sc_mtx); 1199 1200 return (0); 1201 } 1202 1203 static int 1204 uhub_suspend(device_t dev) 1205 { 1206 DPRINTF("\n"); 1207 /* Sub-devices are not suspended here! */ 1208 return (0); 1209 } 1210 1211 static int 1212 uhub_resume(device_t dev) 1213 { 1214 DPRINTF("\n"); 1215 /* Sub-devices are not resumed here! */ 1216 return (0); 1217 } 1218 1219 static void 1220 uhub_driver_added(device_t dev, driver_t *driver) 1221 { 1222 usb_needs_explore_all(); 1223 } 1224 1225 struct hub_result { 1226 struct usb_device *udev; 1227 uint8_t portno; 1228 uint8_t iface_index; 1229 }; 1230 1231 static void 1232 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1233 struct hub_result *res) 1234 { 1235 struct usb_interface *iface; 1236 struct usb_device *udev; 1237 uint8_t nports; 1238 uint8_t x; 1239 uint8_t i; 1240 1241 nports = hub->nports; 1242 for (x = 0; x != nports; x++) { 1243 udev = usb_bus_port_get_device(hub->hubudev->bus, 1244 hub->ports + x); 1245 if (!udev) { 1246 continue; 1247 } 1248 for (i = 0; i != USB_IFACE_MAX; i++) { 1249 iface = usbd_get_iface(udev, i); 1250 if (iface && 1251 (iface->subdev == child)) { 1252 res->iface_index = i; 1253 res->udev = udev; 1254 res->portno = x + 1; 1255 return; 1256 } 1257 } 1258 } 1259 res->iface_index = 0; 1260 res->udev = NULL; 1261 res->portno = 0; 1262 } 1263 1264 static int 1265 uhub_child_location_string(device_t parent, device_t child, 1266 char *buf, size_t buflen) 1267 { 1268 struct uhub_softc *sc; 1269 struct usb_hub *hub; 1270 struct hub_result res; 1271 1272 if (!device_is_attached(parent)) { 1273 if (buflen) 1274 buf[0] = 0; 1275 return (0); 1276 } 1277 1278 sc = device_get_softc(parent); 1279 hub = sc->sc_udev->hub; 1280 1281 mtx_lock(&Giant); 1282 uhub_find_iface_index(hub, child, &res); 1283 if (!res.udev) { 1284 DPRINTF("device not on hub\n"); 1285 if (buflen) { 1286 buf[0] = '\0'; 1287 } 1288 goto done; 1289 } 1290 snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u interface=%u", 1291 (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0, 1292 res.portno, device_get_unit(res.udev->bus->bdev), 1293 res.udev->device_index, res.iface_index); 1294 done: 1295 mtx_unlock(&Giant); 1296 1297 return (0); 1298 } 1299 1300 static int 1301 uhub_child_pnpinfo_string(device_t parent, device_t child, 1302 char *buf, size_t buflen) 1303 { 1304 struct uhub_softc *sc; 1305 struct usb_hub *hub; 1306 struct usb_interface *iface; 1307 struct hub_result res; 1308 1309 if (!device_is_attached(parent)) { 1310 if (buflen) 1311 buf[0] = 0; 1312 return (0); 1313 } 1314 1315 sc = device_get_softc(parent); 1316 hub = sc->sc_udev->hub; 1317 1318 mtx_lock(&Giant); 1319 uhub_find_iface_index(hub, child, &res); 1320 if (!res.udev) { 1321 DPRINTF("device not on hub\n"); 1322 if (buflen) { 1323 buf[0] = '\0'; 1324 } 1325 goto done; 1326 } 1327 iface = usbd_get_iface(res.udev, res.iface_index); 1328 if (iface && iface->idesc) { 1329 snprintf(buf, buflen, "vendor=0x%04x product=0x%04x " 1330 "devclass=0x%02x devsubclass=0x%02x " 1331 "sernum=\"%s\" " 1332 "release=0x%04x " 1333 "intclass=0x%02x intsubclass=0x%02x" "%s%s", 1334 UGETW(res.udev->ddesc.idVendor), 1335 UGETW(res.udev->ddesc.idProduct), 1336 res.udev->ddesc.bDeviceClass, 1337 res.udev->ddesc.bDeviceSubClass, 1338 usb_get_serial(res.udev), 1339 UGETW(res.udev->ddesc.bcdDevice), 1340 iface->idesc->bInterfaceClass, 1341 iface->idesc->bInterfaceSubClass, 1342 iface->pnpinfo ? " " : "", 1343 iface->pnpinfo ? iface->pnpinfo : ""); 1344 } else { 1345 if (buflen) { 1346 buf[0] = '\0'; 1347 } 1348 goto done; 1349 } 1350 done: 1351 mtx_unlock(&Giant); 1352 1353 return (0); 1354 } 1355 1356 /* 1357 * The USB Transaction Translator: 1358 * =============================== 1359 * 1360 * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed 1361 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1362 * USB transfers. To utilize bandwidth dynamically the "scatter and 1363 * gather" principle must be applied. This means that bandwidth must 1364 * be divided into equal parts of bandwidth. With regard to USB all 1365 * data is transferred in smaller packets with length 1366 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1367 * not a constant! 1368 * 1369 * The bandwidth scheduler which I have implemented will simply pack 1370 * the USB transfers back to back until there is no more space in the 1371 * schedule. Out of the 8 microframes which the USB 2.0 standard 1372 * provides, only 6 are available for non-HIGH-speed devices. I have 1373 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1374 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1375 * this division, it is very difficult to allocate and free bandwidth 1376 * dynamically. 1377 * 1378 * NOTE about the Transaction Translator in USB HUBs: 1379 * 1380 * USB HUBs have a very simple Transaction Translator, that will 1381 * simply pipeline all the SPLIT transactions. That means that the 1382 * transactions will be executed in the order they are queued! 1383 * 1384 */ 1385 1386 /*------------------------------------------------------------------------* 1387 * usb_intr_find_best_slot 1388 * 1389 * Return value: 1390 * The best Transaction Translation slot for an interrupt endpoint. 1391 *------------------------------------------------------------------------*/ 1392 static uint8_t 1393 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1394 uint8_t end, uint8_t mask) 1395 { 1396 usb_size_t min = 0 - 1; 1397 usb_size_t sum; 1398 uint8_t x; 1399 uint8_t y; 1400 uint8_t z; 1401 1402 y = 0; 1403 1404 /* find the last slot with lesser used bandwidth */ 1405 1406 for (x = start; x < end; x++) { 1407 1408 sum = 0; 1409 1410 /* compute sum of bandwidth */ 1411 for (z = x; z < end; z++) { 1412 if (mask & (1U << (z - x))) 1413 sum += ptr[z]; 1414 } 1415 1416 /* check if the current multi-slot is more optimal */ 1417 if (min >= sum) { 1418 min = sum; 1419 y = x; 1420 } 1421 1422 /* check if the mask is about to be shifted out */ 1423 if (mask & (1U << (end - 1 - x))) 1424 break; 1425 } 1426 return (y); 1427 } 1428 1429 /*------------------------------------------------------------------------* 1430 * usb_hs_bandwidth_adjust 1431 * 1432 * This function will update the bandwith usage for the microframe 1433 * having index "slot" by "len" bytes. "len" can be negative. If the 1434 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1435 * the "slot" argument will be replaced by the slot having least used 1436 * bandwidth. The "mask" argument is used for multi-slot allocations. 1437 * 1438 * Returns: 1439 * The slot in which the bandwidth update was done: 0..7 1440 *------------------------------------------------------------------------*/ 1441 static uint8_t 1442 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1443 uint8_t slot, uint8_t mask) 1444 { 1445 struct usb_bus *bus = udev->bus; 1446 struct usb_hub *hub; 1447 enum usb_dev_speed speed; 1448 uint8_t x; 1449 1450 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1451 1452 speed = usbd_get_speed(udev); 1453 1454 switch (speed) { 1455 case USB_SPEED_LOW: 1456 case USB_SPEED_FULL: 1457 if (speed == USB_SPEED_LOW) { 1458 len *= 8; 1459 } 1460 /* 1461 * The Host Controller Driver should have 1462 * performed checks so that the lookup 1463 * below does not result in a NULL pointer 1464 * access. 1465 */ 1466 1467 hub = udev->parent_hs_hub->hub; 1468 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1469 slot = usb_intr_find_best_slot(hub->uframe_usage, 1470 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1471 } 1472 for (x = slot; x < 8; x++) { 1473 if (mask & (1U << (x - slot))) { 1474 hub->uframe_usage[x] += len; 1475 bus->uframe_usage[x] += len; 1476 } 1477 } 1478 break; 1479 default: 1480 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1481 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1482 USB_HS_MICRO_FRAMES_MAX, mask); 1483 } 1484 for (x = slot; x < 8; x++) { 1485 if (mask & (1U << (x - slot))) { 1486 bus->uframe_usage[x] += len; 1487 } 1488 } 1489 break; 1490 } 1491 return (slot); 1492 } 1493 1494 /*------------------------------------------------------------------------* 1495 * usb_hs_bandwidth_alloc 1496 * 1497 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1498 *------------------------------------------------------------------------*/ 1499 void 1500 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1501 { 1502 struct usb_device *udev; 1503 uint8_t slot; 1504 uint8_t mask; 1505 uint8_t speed; 1506 1507 udev = xfer->xroot->udev; 1508 1509 if (udev->flags.usb_mode != USB_MODE_HOST) 1510 return; /* not supported */ 1511 1512 xfer->endpoint->refcount_bw++; 1513 if (xfer->endpoint->refcount_bw != 1) 1514 return; /* already allocated */ 1515 1516 speed = usbd_get_speed(udev); 1517 1518 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1519 case UE_INTERRUPT: 1520 /* allocate a microframe slot */ 1521 1522 mask = 0x01; 1523 slot = usb_hs_bandwidth_adjust(udev, 1524 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1525 1526 xfer->endpoint->usb_uframe = slot; 1527 xfer->endpoint->usb_smask = mask << slot; 1528 1529 if ((speed != USB_SPEED_FULL) && 1530 (speed != USB_SPEED_LOW)) { 1531 xfer->endpoint->usb_cmask = 0x00 ; 1532 } else { 1533 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1534 } 1535 break; 1536 1537 case UE_ISOCHRONOUS: 1538 switch (usbd_xfer_get_fps_shift(xfer)) { 1539 case 0: 1540 mask = 0xFF; 1541 break; 1542 case 1: 1543 mask = 0x55; 1544 break; 1545 case 2: 1546 mask = 0x11; 1547 break; 1548 default: 1549 mask = 0x01; 1550 break; 1551 } 1552 1553 /* allocate a microframe multi-slot */ 1554 1555 slot = usb_hs_bandwidth_adjust(udev, 1556 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1557 1558 xfer->endpoint->usb_uframe = slot; 1559 xfer->endpoint->usb_cmask = 0; 1560 xfer->endpoint->usb_smask = mask << slot; 1561 break; 1562 1563 default: 1564 xfer->endpoint->usb_uframe = 0; 1565 xfer->endpoint->usb_cmask = 0; 1566 xfer->endpoint->usb_smask = 0; 1567 break; 1568 } 1569 1570 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1571 xfer->endpoint->usb_uframe, 1572 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1573 } 1574 1575 /*------------------------------------------------------------------------* 1576 * usb_hs_bandwidth_free 1577 * 1578 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1579 *------------------------------------------------------------------------*/ 1580 void 1581 usb_hs_bandwidth_free(struct usb_xfer *xfer) 1582 { 1583 struct usb_device *udev; 1584 uint8_t slot; 1585 uint8_t mask; 1586 1587 udev = xfer->xroot->udev; 1588 1589 if (udev->flags.usb_mode != USB_MODE_HOST) 1590 return; /* not supported */ 1591 1592 xfer->endpoint->refcount_bw--; 1593 if (xfer->endpoint->refcount_bw != 0) 1594 return; /* still allocated */ 1595 1596 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1597 case UE_INTERRUPT: 1598 case UE_ISOCHRONOUS: 1599 1600 slot = xfer->endpoint->usb_uframe; 1601 mask = xfer->endpoint->usb_smask; 1602 1603 /* free microframe slot(s): */ 1604 usb_hs_bandwidth_adjust(udev, 1605 -xfer->max_frame_size, slot, mask >> slot); 1606 1607 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1608 slot, mask >> slot); 1609 1610 xfer->endpoint->usb_uframe = 0; 1611 xfer->endpoint->usb_cmask = 0; 1612 xfer->endpoint->usb_smask = 0; 1613 break; 1614 1615 default: 1616 break; 1617 } 1618 } 1619 1620 /*------------------------------------------------------------------------* 1621 * usbd_fs_isoc_schedule_init_sub 1622 * 1623 * This function initialises an USB FULL speed isochronous schedule 1624 * entry. 1625 *------------------------------------------------------------------------*/ 1626 #if USB_HAVE_TT_SUPPORT 1627 static void 1628 usbd_fs_isoc_schedule_init_sub(struct usb_fs_isoc_schedule *fss) 1629 { 1630 fss->total_bytes = (USB_FS_ISOC_UFRAME_MAX * 1631 USB_FS_BYTES_PER_HS_UFRAME); 1632 fss->frame_bytes = (USB_FS_BYTES_PER_HS_UFRAME); 1633 fss->frame_slot = 0; 1634 } 1635 #endif 1636 1637 /*------------------------------------------------------------------------* 1638 * usbd_fs_isoc_schedule_init_all 1639 * 1640 * This function will reset the complete USB FULL speed isochronous 1641 * bandwidth schedule. 1642 *------------------------------------------------------------------------*/ 1643 #if USB_HAVE_TT_SUPPORT 1644 void 1645 usbd_fs_isoc_schedule_init_all(struct usb_fs_isoc_schedule *fss) 1646 { 1647 struct usb_fs_isoc_schedule *fss_end = fss + USB_ISOC_TIME_MAX; 1648 1649 while (fss != fss_end) { 1650 usbd_fs_isoc_schedule_init_sub(fss); 1651 fss++; 1652 } 1653 } 1654 #endif 1655 1656 /*------------------------------------------------------------------------* 1657 * usb_isoc_time_expand 1658 * 1659 * This function will expand the time counter from 7-bit to 16-bit. 1660 * 1661 * Returns: 1662 * 16-bit isochronous time counter. 1663 *------------------------------------------------------------------------*/ 1664 uint16_t 1665 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 1666 { 1667 uint16_t rem; 1668 1669 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1670 1671 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 1672 1673 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 1674 1675 if (isoc_time_curr < rem) { 1676 /* the time counter wrapped around */ 1677 bus->isoc_time_last += USB_ISOC_TIME_MAX; 1678 } 1679 /* update the remainder */ 1680 1681 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 1682 bus->isoc_time_last |= isoc_time_curr; 1683 1684 return (bus->isoc_time_last); 1685 } 1686 1687 /*------------------------------------------------------------------------* 1688 * usbd_fs_isoc_schedule_isoc_time_expand 1689 * 1690 * This function does multiple things. First of all it will expand the 1691 * passed isochronous time, which is the return value. Then it will 1692 * store where the current FULL speed isochronous schedule is 1693 * positioned in time and where the end is. See "pp_start" and 1694 * "pp_end" arguments. 1695 * 1696 * Returns: 1697 * Expanded version of "isoc_time". 1698 * 1699 * NOTE: This function depends on being called regularly with 1700 * intervals less than "USB_ISOC_TIME_MAX". 1701 *------------------------------------------------------------------------*/ 1702 #if USB_HAVE_TT_SUPPORT 1703 uint16_t 1704 usbd_fs_isoc_schedule_isoc_time_expand(struct usb_device *udev, 1705 struct usb_fs_isoc_schedule **pp_start, 1706 struct usb_fs_isoc_schedule **pp_end, 1707 uint16_t isoc_time) 1708 { 1709 struct usb_fs_isoc_schedule *fss_end; 1710 struct usb_fs_isoc_schedule *fss_a; 1711 struct usb_fs_isoc_schedule *fss_b; 1712 struct usb_hub *hs_hub; 1713 1714 isoc_time = usb_isoc_time_expand(udev->bus, isoc_time); 1715 1716 hs_hub = udev->parent_hs_hub->hub; 1717 1718 if (hs_hub != NULL) { 1719 1720 fss_a = hs_hub->fs_isoc_schedule + 1721 (hs_hub->isoc_last_time % USB_ISOC_TIME_MAX); 1722 1723 hs_hub->isoc_last_time = isoc_time; 1724 1725 fss_b = hs_hub->fs_isoc_schedule + 1726 (isoc_time % USB_ISOC_TIME_MAX); 1727 1728 fss_end = hs_hub->fs_isoc_schedule + USB_ISOC_TIME_MAX; 1729 1730 *pp_start = hs_hub->fs_isoc_schedule; 1731 *pp_end = fss_end; 1732 1733 while (fss_a != fss_b) { 1734 if (fss_a == fss_end) { 1735 fss_a = hs_hub->fs_isoc_schedule; 1736 continue; 1737 } 1738 usbd_fs_isoc_schedule_init_sub(fss_a); 1739 fss_a++; 1740 } 1741 1742 } else { 1743 1744 *pp_start = NULL; 1745 *pp_end = NULL; 1746 } 1747 return (isoc_time); 1748 } 1749 #endif 1750 1751 /*------------------------------------------------------------------------* 1752 * usbd_fs_isoc_schedule_alloc 1753 * 1754 * This function will allocate bandwidth for an isochronous FULL speed 1755 * transaction in the FULL speed schedule. The microframe slot where 1756 * the transaction should be started is stored in the byte pointed to 1757 * by "pstart". The "len" argument specifies the length of the 1758 * transaction in bytes. 1759 * 1760 * Returns: 1761 * 0: Success 1762 * Else: Error 1763 *------------------------------------------------------------------------*/ 1764 #if USB_HAVE_TT_SUPPORT 1765 uint8_t 1766 usbd_fs_isoc_schedule_alloc(struct usb_fs_isoc_schedule *fss, 1767 uint8_t *pstart, uint16_t len) 1768 { 1769 uint8_t slot = fss->frame_slot; 1770 1771 /* Compute overhead and bit-stuffing */ 1772 1773 len += 8; 1774 1775 len *= 7; 1776 len /= 6; 1777 1778 if (len > fss->total_bytes) { 1779 *pstart = 0; /* set some dummy value */ 1780 return (1); /* error */ 1781 } 1782 if (len > 0) { 1783 1784 fss->total_bytes -= len; 1785 1786 while (len >= fss->frame_bytes) { 1787 len -= fss->frame_bytes; 1788 fss->frame_bytes = USB_FS_BYTES_PER_HS_UFRAME; 1789 fss->frame_slot++; 1790 } 1791 1792 fss->frame_bytes -= len; 1793 } 1794 *pstart = slot; 1795 return (0); /* success */ 1796 } 1797 #endif 1798 1799 /*------------------------------------------------------------------------* 1800 * usb_bus_port_get_device 1801 * 1802 * This function is NULL safe. 1803 *------------------------------------------------------------------------*/ 1804 struct usb_device * 1805 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 1806 { 1807 if ((bus == NULL) || (up == NULL)) { 1808 /* be NULL safe */ 1809 return (NULL); 1810 } 1811 if (up->device_index == 0) { 1812 /* nothing to do */ 1813 return (NULL); 1814 } 1815 return (bus->devices[up->device_index]); 1816 } 1817 1818 /*------------------------------------------------------------------------* 1819 * usb_bus_port_set_device 1820 * 1821 * This function is NULL safe. 1822 *------------------------------------------------------------------------*/ 1823 void 1824 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 1825 struct usb_device *udev, uint8_t device_index) 1826 { 1827 if (bus == NULL) { 1828 /* be NULL safe */ 1829 return; 1830 } 1831 /* 1832 * There is only one case where we don't 1833 * have an USB port, and that is the Root Hub! 1834 */ 1835 if (up) { 1836 if (udev) { 1837 up->device_index = device_index; 1838 } else { 1839 device_index = up->device_index; 1840 up->device_index = 0; 1841 } 1842 } 1843 /* 1844 * Make relationships to our new device 1845 */ 1846 if (device_index != 0) { 1847 #if USB_HAVE_UGEN 1848 mtx_lock(&usb_ref_lock); 1849 #endif 1850 bus->devices[device_index] = udev; 1851 #if USB_HAVE_UGEN 1852 mtx_unlock(&usb_ref_lock); 1853 #endif 1854 } 1855 /* 1856 * Debug print 1857 */ 1858 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 1859 } 1860 1861 /*------------------------------------------------------------------------* 1862 * usb_needs_explore 1863 * 1864 * This functions is called when the USB event thread needs to run. 1865 *------------------------------------------------------------------------*/ 1866 void 1867 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 1868 { 1869 uint8_t do_unlock; 1870 1871 DPRINTF("\n"); 1872 1873 if (bus == NULL) { 1874 DPRINTF("No bus pointer!\n"); 1875 return; 1876 } 1877 if ((bus->devices == NULL) || 1878 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 1879 DPRINTF("No root HUB\n"); 1880 return; 1881 } 1882 if (mtx_owned(&bus->bus_mtx)) { 1883 do_unlock = 0; 1884 } else { 1885 USB_BUS_LOCK(bus); 1886 do_unlock = 1; 1887 } 1888 if (do_probe) { 1889 bus->do_probe = 1; 1890 } 1891 if (usb_proc_msignal(&bus->explore_proc, 1892 &bus->explore_msg[0], &bus->explore_msg[1])) { 1893 /* ignore */ 1894 } 1895 if (do_unlock) { 1896 USB_BUS_UNLOCK(bus); 1897 } 1898 } 1899 1900 /*------------------------------------------------------------------------* 1901 * usb_needs_explore_all 1902 * 1903 * This function is called whenever a new driver is loaded and will 1904 * cause that all USB busses are re-explored. 1905 *------------------------------------------------------------------------*/ 1906 void 1907 usb_needs_explore_all(void) 1908 { 1909 struct usb_bus *bus; 1910 devclass_t dc; 1911 device_t dev; 1912 int max; 1913 1914 DPRINTFN(3, "\n"); 1915 1916 dc = usb_devclass_ptr; 1917 if (dc == NULL) { 1918 DPRINTFN(0, "no devclass\n"); 1919 return; 1920 } 1921 /* 1922 * Explore all USB busses in parallell. 1923 */ 1924 max = devclass_get_maxunit(dc); 1925 while (max >= 0) { 1926 dev = devclass_get_device(dc, max); 1927 if (dev) { 1928 bus = device_get_softc(dev); 1929 if (bus) { 1930 usb_needs_explore(bus, 1); 1931 } 1932 } 1933 max--; 1934 } 1935 } 1936 1937 /*------------------------------------------------------------------------* 1938 * usb_bus_power_update 1939 * 1940 * This function will ensure that all USB devices on the given bus are 1941 * properly suspended or resumed according to the device transfer 1942 * state. 1943 *------------------------------------------------------------------------*/ 1944 #if USB_HAVE_POWERD 1945 void 1946 usb_bus_power_update(struct usb_bus *bus) 1947 { 1948 usb_needs_explore(bus, 0 /* no probe */ ); 1949 } 1950 #endif 1951 1952 /*------------------------------------------------------------------------* 1953 * usbd_transfer_power_ref 1954 * 1955 * This function will modify the power save reference counts and 1956 * wakeup the USB device associated with the given USB transfer, if 1957 * needed. 1958 *------------------------------------------------------------------------*/ 1959 #if USB_HAVE_POWERD 1960 void 1961 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 1962 { 1963 static const usb_power_mask_t power_mask[4] = { 1964 [UE_CONTROL] = USB_HW_POWER_CONTROL, 1965 [UE_BULK] = USB_HW_POWER_BULK, 1966 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 1967 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 1968 }; 1969 struct usb_device *udev; 1970 uint8_t needs_explore; 1971 uint8_t needs_hw_power; 1972 uint8_t xfer_type; 1973 1974 udev = xfer->xroot->udev; 1975 1976 if (udev->device_index == USB_ROOT_HUB_ADDR) { 1977 /* no power save for root HUB */ 1978 return; 1979 } 1980 USB_BUS_LOCK(udev->bus); 1981 1982 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 1983 1984 udev->pwr_save.last_xfer_time = ticks; 1985 udev->pwr_save.type_refs[xfer_type] += val; 1986 1987 if (xfer->flags_int.control_xfr) { 1988 udev->pwr_save.read_refs += val; 1989 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 1990 /* 1991 * It is not allowed to suspend during a 1992 * control transfer: 1993 */ 1994 udev->pwr_save.write_refs += val; 1995 } 1996 } else if (USB_GET_DATA_ISREAD(xfer)) { 1997 udev->pwr_save.read_refs += val; 1998 } else { 1999 udev->pwr_save.write_refs += val; 2000 } 2001 2002 if (val > 0) { 2003 if (udev->flags.self_suspended) 2004 needs_explore = usb_peer_should_wakeup(udev); 2005 else 2006 needs_explore = 0; 2007 2008 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2009 DPRINTF("Adding type %u to power state\n", xfer_type); 2010 udev->bus->hw_power_state |= power_mask[xfer_type]; 2011 needs_hw_power = 1; 2012 } else { 2013 needs_hw_power = 0; 2014 } 2015 } else { 2016 needs_explore = 0; 2017 needs_hw_power = 0; 2018 } 2019 2020 USB_BUS_UNLOCK(udev->bus); 2021 2022 if (needs_explore) { 2023 DPRINTF("update\n"); 2024 usb_bus_power_update(udev->bus); 2025 } else if (needs_hw_power) { 2026 DPRINTF("needs power\n"); 2027 if (udev->bus->methods->set_hw_power != NULL) { 2028 (udev->bus->methods->set_hw_power) (udev->bus); 2029 } 2030 } 2031 } 2032 #endif 2033 2034 /*------------------------------------------------------------------------* 2035 * usb_peer_should_wakeup 2036 * 2037 * This function returns non-zero if the current device should wake up. 2038 *------------------------------------------------------------------------*/ 2039 static uint8_t 2040 usb_peer_should_wakeup(struct usb_device *udev) 2041 { 2042 return ((udev->power_mode == USB_POWER_MODE_ON) || 2043 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2044 (udev->re_enumerate_wait != 0) || 2045 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2046 (udev->pwr_save.write_refs != 0) || 2047 ((udev->pwr_save.read_refs != 0) && 2048 (udev->flags.usb_mode == USB_MODE_HOST) && 2049 (usb_device_20_compatible(udev) != 0) && 2050 (usb_peer_can_wakeup(udev) == 0))); 2051 } 2052 2053 /*------------------------------------------------------------------------* 2054 * usb_bus_powerd 2055 * 2056 * This function implements the USB power daemon and is called 2057 * regularly from the USB explore thread. 2058 *------------------------------------------------------------------------*/ 2059 #if USB_HAVE_POWERD 2060 void 2061 usb_bus_powerd(struct usb_bus *bus) 2062 { 2063 struct usb_device *udev; 2064 usb_ticks_t temp; 2065 usb_ticks_t limit; 2066 usb_ticks_t mintime; 2067 usb_size_t type_refs[5]; 2068 uint8_t x; 2069 2070 limit = usb_power_timeout; 2071 if (limit == 0) 2072 limit = hz; 2073 else if (limit > 255) 2074 limit = 255 * hz; 2075 else 2076 limit = limit * hz; 2077 2078 DPRINTF("bus=%p\n", bus); 2079 2080 USB_BUS_LOCK(bus); 2081 2082 /* 2083 * The root HUB device is never suspended 2084 * and we simply skip it. 2085 */ 2086 for (x = USB_ROOT_HUB_ADDR + 1; 2087 x != bus->devices_max; x++) { 2088 2089 udev = bus->devices[x]; 2090 if (udev == NULL) 2091 continue; 2092 2093 temp = ticks - udev->pwr_save.last_xfer_time; 2094 2095 if (usb_peer_should_wakeup(udev)) { 2096 /* check if we are suspended */ 2097 if (udev->flags.self_suspended != 0) { 2098 USB_BUS_UNLOCK(bus); 2099 usb_dev_resume_peer(udev); 2100 USB_BUS_LOCK(bus); 2101 } 2102 } else if ((temp >= limit) && 2103 (udev->flags.usb_mode == USB_MODE_HOST) && 2104 (udev->flags.self_suspended == 0)) { 2105 /* try to do suspend */ 2106 2107 USB_BUS_UNLOCK(bus); 2108 usb_dev_suspend_peer(udev); 2109 USB_BUS_LOCK(bus); 2110 } 2111 } 2112 2113 /* reset counters */ 2114 2115 mintime = 0 - 1; 2116 type_refs[0] = 0; 2117 type_refs[1] = 0; 2118 type_refs[2] = 0; 2119 type_refs[3] = 0; 2120 type_refs[4] = 0; 2121 2122 /* Re-loop all the devices to get the actual state */ 2123 2124 for (x = USB_ROOT_HUB_ADDR + 1; 2125 x != bus->devices_max; x++) { 2126 2127 udev = bus->devices[x]; 2128 if (udev == NULL) 2129 continue; 2130 2131 /* we found a non-Root-Hub USB device */ 2132 type_refs[4] += 1; 2133 2134 /* "last_xfer_time" can be updated by a resume */ 2135 temp = ticks - udev->pwr_save.last_xfer_time; 2136 2137 /* 2138 * Compute minimum time since last transfer for the complete 2139 * bus: 2140 */ 2141 if (temp < mintime) 2142 mintime = temp; 2143 2144 if (udev->flags.self_suspended == 0) { 2145 type_refs[0] += udev->pwr_save.type_refs[0]; 2146 type_refs[1] += udev->pwr_save.type_refs[1]; 2147 type_refs[2] += udev->pwr_save.type_refs[2]; 2148 type_refs[3] += udev->pwr_save.type_refs[3]; 2149 } 2150 } 2151 2152 if (mintime >= (1 * hz)) { 2153 /* recompute power masks */ 2154 DPRINTF("Recomputing power masks\n"); 2155 bus->hw_power_state = 0; 2156 if (type_refs[UE_CONTROL] != 0) 2157 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2158 if (type_refs[UE_BULK] != 0) 2159 bus->hw_power_state |= USB_HW_POWER_BULK; 2160 if (type_refs[UE_INTERRUPT] != 0) 2161 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2162 if (type_refs[UE_ISOCHRONOUS] != 0) 2163 bus->hw_power_state |= USB_HW_POWER_ISOC; 2164 if (type_refs[4] != 0) 2165 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2166 } 2167 USB_BUS_UNLOCK(bus); 2168 2169 if (bus->methods->set_hw_power != NULL) { 2170 /* always update hardware power! */ 2171 (bus->methods->set_hw_power) (bus); 2172 } 2173 return; 2174 } 2175 #endif 2176 2177 /*------------------------------------------------------------------------* 2178 * usb_dev_resume_peer 2179 * 2180 * This function will resume an USB peer and do the required USB 2181 * signalling to get an USB device out of the suspended state. 2182 *------------------------------------------------------------------------*/ 2183 static void 2184 usb_dev_resume_peer(struct usb_device *udev) 2185 { 2186 struct usb_bus *bus; 2187 int err; 2188 2189 /* be NULL safe */ 2190 if (udev == NULL) 2191 return; 2192 2193 /* check if already resumed */ 2194 if (udev->flags.self_suspended == 0) 2195 return; 2196 2197 /* we need a parent HUB to do resume */ 2198 if (udev->parent_hub == NULL) 2199 return; 2200 2201 DPRINTF("udev=%p\n", udev); 2202 2203 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2204 (udev->flags.remote_wakeup == 0)) { 2205 /* 2206 * If the host did not set the remote wakeup feature, we can 2207 * not wake it up either! 2208 */ 2209 DPRINTF("remote wakeup is not set!\n"); 2210 return; 2211 } 2212 /* get bus pointer */ 2213 bus = udev->bus; 2214 2215 /* resume parent hub first */ 2216 usb_dev_resume_peer(udev->parent_hub); 2217 2218 /* reduce chance of instant resume failure by waiting a little bit */ 2219 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2220 2221 if (usb_device_20_compatible(udev)) { 2222 /* resume current port (Valid in Host and Device Mode) */ 2223 err = usbd_req_clear_port_feature(udev->parent_hub, 2224 NULL, udev->port_no, UHF_PORT_SUSPEND); 2225 if (err) { 2226 DPRINTFN(0, "Resuming port failed\n"); 2227 return; 2228 } 2229 } 2230 2231 /* resume settle time */ 2232 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2233 2234 if (bus->methods->device_resume != NULL) { 2235 /* resume USB device on the USB controller */ 2236 (bus->methods->device_resume) (udev); 2237 } 2238 USB_BUS_LOCK(bus); 2239 /* set that this device is now resumed */ 2240 udev->flags.self_suspended = 0; 2241 #if USB_HAVE_POWERD 2242 /* make sure that we don't go into suspend right away */ 2243 udev->pwr_save.last_xfer_time = ticks; 2244 2245 /* make sure the needed power masks are on */ 2246 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2247 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2248 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2249 bus->hw_power_state |= USB_HW_POWER_BULK; 2250 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2251 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2252 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2253 bus->hw_power_state |= USB_HW_POWER_ISOC; 2254 #endif 2255 USB_BUS_UNLOCK(bus); 2256 2257 if (bus->methods->set_hw_power != NULL) { 2258 /* always update hardware power! */ 2259 (bus->methods->set_hw_power) (bus); 2260 } 2261 2262 usbd_sr_lock(udev); 2263 2264 /* notify all sub-devices about resume */ 2265 err = usb_suspend_resume(udev, 0); 2266 2267 usbd_sr_unlock(udev); 2268 2269 /* check if peer has wakeup capability */ 2270 if (usb_peer_can_wakeup(udev) && 2271 usb_device_20_compatible(udev)) { 2272 /* clear remote wakeup */ 2273 err = usbd_req_clear_device_feature(udev, 2274 NULL, UF_DEVICE_REMOTE_WAKEUP); 2275 if (err) { 2276 DPRINTFN(0, "Clearing device " 2277 "remote wakeup failed: %s\n", 2278 usbd_errstr(err)); 2279 } 2280 } 2281 } 2282 2283 /*------------------------------------------------------------------------* 2284 * usb_dev_suspend_peer 2285 * 2286 * This function will suspend an USB peer and do the required USB 2287 * signalling to get an USB device into the suspended state. 2288 *------------------------------------------------------------------------*/ 2289 static void 2290 usb_dev_suspend_peer(struct usb_device *udev) 2291 { 2292 struct usb_device *child; 2293 int err; 2294 uint8_t x; 2295 uint8_t nports; 2296 2297 repeat: 2298 /* be NULL safe */ 2299 if (udev == NULL) 2300 return; 2301 2302 /* check if already suspended */ 2303 if (udev->flags.self_suspended) 2304 return; 2305 2306 /* we need a parent HUB to do suspend */ 2307 if (udev->parent_hub == NULL) 2308 return; 2309 2310 DPRINTF("udev=%p\n", udev); 2311 2312 /* check if the current device is a HUB */ 2313 if (udev->hub != NULL) { 2314 nports = udev->hub->nports; 2315 2316 /* check if all devices on the HUB are suspended */ 2317 for (x = 0; x != nports; x++) { 2318 child = usb_bus_port_get_device(udev->bus, 2319 udev->hub->ports + x); 2320 2321 if (child == NULL) 2322 continue; 2323 2324 if (child->flags.self_suspended) 2325 continue; 2326 2327 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2328 return; 2329 } 2330 } 2331 2332 if (usb_peer_can_wakeup(udev) && 2333 usb_device_20_compatible(udev)) { 2334 /* 2335 * This request needs to be done before we set 2336 * "udev->flags.self_suspended": 2337 */ 2338 2339 /* allow device to do remote wakeup */ 2340 err = usbd_req_set_device_feature(udev, 2341 NULL, UF_DEVICE_REMOTE_WAKEUP); 2342 if (err) { 2343 DPRINTFN(0, "Setting device " 2344 "remote wakeup failed\n"); 2345 } 2346 } 2347 2348 USB_BUS_LOCK(udev->bus); 2349 /* 2350 * Checking for suspend condition and setting suspended bit 2351 * must be atomic! 2352 */ 2353 err = usb_peer_should_wakeup(udev); 2354 if (err == 0) { 2355 /* 2356 * Set that this device is suspended. This variable 2357 * must be set before calling USB controller suspend 2358 * callbacks. 2359 */ 2360 udev->flags.self_suspended = 1; 2361 } 2362 USB_BUS_UNLOCK(udev->bus); 2363 2364 if (err != 0) { 2365 if (usb_peer_can_wakeup(udev) && 2366 usb_device_20_compatible(udev)) { 2367 /* allow device to do remote wakeup */ 2368 err = usbd_req_clear_device_feature(udev, 2369 NULL, UF_DEVICE_REMOTE_WAKEUP); 2370 if (err) { 2371 DPRINTFN(0, "Setting device " 2372 "remote wakeup failed\n"); 2373 } 2374 } 2375 2376 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2377 /* resume parent HUB first */ 2378 usb_dev_resume_peer(udev->parent_hub); 2379 2380 /* reduce chance of instant resume failure by waiting a little bit */ 2381 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2382 2383 /* resume current port (Valid in Host and Device Mode) */ 2384 err = usbd_req_clear_port_feature(udev->parent_hub, 2385 NULL, udev->port_no, UHF_PORT_SUSPEND); 2386 2387 /* resume settle time */ 2388 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2389 } 2390 DPRINTF("Suspend was cancelled!\n"); 2391 return; 2392 } 2393 2394 usbd_sr_lock(udev); 2395 2396 /* notify all sub-devices about suspend */ 2397 err = usb_suspend_resume(udev, 1); 2398 2399 usbd_sr_unlock(udev); 2400 2401 if (udev->bus->methods->device_suspend != NULL) { 2402 usb_timeout_t temp; 2403 2404 /* suspend device on the USB controller */ 2405 (udev->bus->methods->device_suspend) (udev); 2406 2407 /* do DMA delay */ 2408 temp = usbd_get_dma_delay(udev); 2409 if (temp != 0) 2410 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2411 2412 } 2413 2414 if (usb_device_20_compatible(udev)) { 2415 /* suspend current port */ 2416 err = usbd_req_set_port_feature(udev->parent_hub, 2417 NULL, udev->port_no, UHF_PORT_SUSPEND); 2418 if (err) { 2419 DPRINTFN(0, "Suspending port failed\n"); 2420 return; 2421 } 2422 } 2423 2424 udev = udev->parent_hub; 2425 goto repeat; 2426 } 2427 2428 /*------------------------------------------------------------------------* 2429 * usbd_set_power_mode 2430 * 2431 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2432 * USB device. 2433 *------------------------------------------------------------------------*/ 2434 void 2435 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2436 { 2437 /* filter input argument */ 2438 if ((power_mode != USB_POWER_MODE_ON) && 2439 (power_mode != USB_POWER_MODE_OFF)) 2440 power_mode = USB_POWER_MODE_SAVE; 2441 2442 power_mode = usbd_filter_power_mode(udev, power_mode); 2443 2444 udev->power_mode = power_mode; /* update copy of power mode */ 2445 2446 #if USB_HAVE_POWERD 2447 usb_bus_power_update(udev->bus); 2448 #endif 2449 } 2450 2451 /*------------------------------------------------------------------------* 2452 * usbd_filter_power_mode 2453 * 2454 * This function filters the power mode based on hardware requirements. 2455 *------------------------------------------------------------------------*/ 2456 uint8_t 2457 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2458 { 2459 struct usb_bus_methods *mtod; 2460 int8_t temp; 2461 2462 mtod = udev->bus->methods; 2463 temp = -1; 2464 2465 if (mtod->get_power_mode != NULL) 2466 (mtod->get_power_mode) (udev, &temp); 2467 2468 /* check if we should not filter */ 2469 if (temp < 0) 2470 return (power_mode); 2471 2472 /* use fixed power mode given by hardware driver */ 2473 return (temp); 2474 } 2475