1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5 * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 31 */ 32 33 #include <sys/stdint.h> 34 #include <sys/stddef.h> 35 #include <sys/param.h> 36 #include <sys/queue.h> 37 #include <sys/types.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/module.h> 42 #include <sys/lock.h> 43 #include <sys/mutex.h> 44 #include <sys/condvar.h> 45 #include <sys/sysctl.h> 46 #include <sys/sx.h> 47 #include <sys/unistd.h> 48 #include <sys/callout.h> 49 #include <sys/malloc.h> 50 #include <sys/priv.h> 51 52 #include <dev/usb/usb.h> 53 #include <dev/usb/usb_ioctl.h> 54 #include <dev/usb/usbdi.h> 55 #include <dev/usb/usbdi_util.h> 56 57 #define USB_DEBUG_VAR uhub_debug 58 59 #include <dev/usb/usb_core.h> 60 #include <dev/usb/usb_process.h> 61 #include <dev/usb/usb_device.h> 62 #include <dev/usb/usb_request.h> 63 #include <dev/usb/usb_debug.h> 64 #include <dev/usb/usb_hub.h> 65 #include <dev/usb/usb_util.h> 66 #include <dev/usb/usb_busdma.h> 67 #include <dev/usb/usb_transfer.h> 68 #include <dev/usb/usb_dynamic.h> 69 70 #include <dev/usb/usb_controller.h> 71 #include <dev/usb/usb_bus.h> 72 73 #define UHUB_INTR_INTERVAL 250 /* ms */ 74 #define UHUB_N_TRANSFER 1 75 76 #ifdef USB_DEBUG 77 static int uhub_debug = 0; 78 79 static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB"); 80 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RW, &uhub_debug, 0, 81 "Debug level"); 82 83 TUNABLE_INT("hw.usb.uhub.debug", &uhub_debug); 84 #endif 85 86 #if USB_HAVE_POWERD 87 static int usb_power_timeout = 30; /* seconds */ 88 89 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RW, 90 &usb_power_timeout, 0, "USB power timeout"); 91 #endif 92 93 struct uhub_current_state { 94 uint16_t port_change; 95 uint16_t port_status; 96 }; 97 98 struct uhub_softc { 99 struct uhub_current_state sc_st;/* current state */ 100 device_t sc_dev; /* base device */ 101 struct mtx sc_mtx; /* our mutex */ 102 struct usb_device *sc_udev; /* USB device */ 103 struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */ 104 uint8_t sc_flags; 105 #define UHUB_FLAG_DID_EXPLORE 0x01 106 char sc_name[32]; 107 }; 108 109 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 110 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 111 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 112 #define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT) 113 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 114 115 /* prototypes for type checking: */ 116 117 static device_probe_t uhub_probe; 118 static device_attach_t uhub_attach; 119 static device_detach_t uhub_detach; 120 static device_suspend_t uhub_suspend; 121 static device_resume_t uhub_resume; 122 123 static bus_driver_added_t uhub_driver_added; 124 static bus_child_location_str_t uhub_child_location_string; 125 static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string; 126 127 static usb_callback_t uhub_intr_callback; 128 129 static void usb_dev_resume_peer(struct usb_device *udev); 130 static void usb_dev_suspend_peer(struct usb_device *udev); 131 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 132 133 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 134 135 [0] = { 136 .type = UE_INTERRUPT, 137 .endpoint = UE_ADDR_ANY, 138 .direction = UE_DIR_ANY, 139 .timeout = 0, 140 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 141 .bufsize = 0, /* use wMaxPacketSize */ 142 .callback = &uhub_intr_callback, 143 .interval = UHUB_INTR_INTERVAL, 144 }, 145 }; 146 147 /* 148 * driver instance for "hub" connected to "usb" 149 * and "hub" connected to "hub" 150 */ 151 static devclass_t uhub_devclass; 152 153 static device_method_t uhub_methods[] = { 154 DEVMETHOD(device_probe, uhub_probe), 155 DEVMETHOD(device_attach, uhub_attach), 156 DEVMETHOD(device_detach, uhub_detach), 157 158 DEVMETHOD(device_suspend, uhub_suspend), 159 DEVMETHOD(device_resume, uhub_resume), 160 161 DEVMETHOD(bus_child_location_str, uhub_child_location_string), 162 DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string), 163 DEVMETHOD(bus_driver_added, uhub_driver_added), 164 {0, 0} 165 }; 166 167 static driver_t uhub_driver = { 168 .name = "uhub", 169 .methods = uhub_methods, 170 .size = sizeof(struct uhub_softc) 171 }; 172 173 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); 174 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); 175 MODULE_VERSION(uhub, 1); 176 177 static void 178 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 179 { 180 struct uhub_softc *sc = usbd_xfer_softc(xfer); 181 182 switch (USB_GET_STATE(xfer)) { 183 case USB_ST_TRANSFERRED: 184 DPRINTFN(2, "\n"); 185 /* 186 * This is an indication that some port 187 * has changed status. Notify the bus 188 * event handler thread that we need 189 * to be explored again: 190 */ 191 usb_needs_explore(sc->sc_udev->bus, 0); 192 193 case USB_ST_SETUP: 194 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 195 usbd_transfer_submit(xfer); 196 break; 197 198 default: /* Error */ 199 if (xfer->error != USB_ERR_CANCELLED) { 200 /* 201 * Do a clear-stall. The "stall_pipe" flag 202 * will get cleared before next callback by 203 * the USB stack. 204 */ 205 usbd_xfer_set_stall(xfer); 206 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 207 usbd_transfer_submit(xfer); 208 } 209 break; 210 } 211 } 212 213 /*------------------------------------------------------------------------* 214 * uhub_explore_sub - subroutine 215 * 216 * Return values: 217 * 0: Success 218 * Else: A control transaction failed 219 *------------------------------------------------------------------------*/ 220 static usb_error_t 221 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 222 { 223 struct usb_bus *bus; 224 struct usb_device *child; 225 uint8_t refcount; 226 usb_error_t err; 227 228 bus = sc->sc_udev->bus; 229 err = 0; 230 231 /* get driver added refcount from USB bus */ 232 refcount = bus->driver_added_refcount; 233 234 /* get device assosiated with the given port */ 235 child = usb_bus_port_get_device(bus, up); 236 if (child == NULL) { 237 /* nothing to do */ 238 goto done; 239 } 240 241 /* check if device should be re-enumerated */ 242 243 if (child->flags.usb_mode == USB_MODE_HOST) { 244 usbd_enum_lock(child); 245 if (child->re_enumerate_wait) { 246 err = usbd_set_config_index(child, 247 USB_UNCONFIG_INDEX); 248 if (err != 0) { 249 DPRINTF("Unconfigure failed: " 250 "%s: Ignored.\n", 251 usbd_errstr(err)); 252 } 253 err = usbd_req_re_enumerate(child, NULL); 254 if (err == 0) 255 err = usbd_set_config_index(child, 0); 256 if (err == 0) { 257 err = usb_probe_and_attach(child, 258 USB_IFACE_INDEX_ANY); 259 } 260 child->re_enumerate_wait = 0; 261 err = 0; 262 } 263 usbd_enum_unlock(child); 264 } 265 266 /* check if probe and attach should be done */ 267 268 if (child->driver_added_refcount != refcount) { 269 child->driver_added_refcount = refcount; 270 err = usb_probe_and_attach(child, 271 USB_IFACE_INDEX_ANY); 272 if (err) { 273 goto done; 274 } 275 } 276 /* start control transfer, if device mode */ 277 278 if (child->flags.usb_mode == USB_MODE_DEVICE) 279 usbd_ctrl_transfer_setup(child); 280 281 /* if a HUB becomes present, do a recursive HUB explore */ 282 283 if (child->hub) 284 err = (child->hub->explore) (child); 285 286 done: 287 return (err); 288 } 289 290 /*------------------------------------------------------------------------* 291 * uhub_read_port_status - factored out code 292 *------------------------------------------------------------------------*/ 293 static usb_error_t 294 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 295 { 296 struct usb_port_status ps; 297 usb_error_t err; 298 299 err = usbd_req_get_port_status( 300 sc->sc_udev, NULL, &ps, portno); 301 302 /* update status regardless of error */ 303 304 sc->sc_st.port_status = UGETW(ps.wPortStatus); 305 sc->sc_st.port_change = UGETW(ps.wPortChange); 306 307 /* debugging print */ 308 309 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 310 "wPortChange=0x%04x, err=%s\n", 311 portno, sc->sc_st.port_status, 312 sc->sc_st.port_change, usbd_errstr(err)); 313 return (err); 314 } 315 316 /*------------------------------------------------------------------------* 317 * uhub_reattach_port 318 * 319 * Returns: 320 * 0: Success 321 * Else: A control transaction failed 322 *------------------------------------------------------------------------*/ 323 static usb_error_t 324 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 325 { 326 struct usb_device *child; 327 struct usb_device *udev; 328 enum usb_dev_speed speed; 329 enum usb_hc_mode mode; 330 usb_error_t err; 331 uint16_t power_mask; 332 uint8_t timeout; 333 334 DPRINTF("reattaching port %d\n", portno); 335 336 err = 0; 337 timeout = 0; 338 udev = sc->sc_udev; 339 child = usb_bus_port_get_device(udev->bus, 340 udev->hub->ports + portno - 1); 341 342 repeat: 343 344 /* first clear the port connection change bit */ 345 346 err = usbd_req_clear_port_feature(udev, NULL, 347 portno, UHF_C_PORT_CONNECTION); 348 349 if (err) { 350 goto error; 351 } 352 /* check if there is a child */ 353 354 if (child != NULL) { 355 /* 356 * Free USB device and all subdevices, if any. 357 */ 358 usb_free_device(child, 0); 359 child = NULL; 360 } 361 /* get fresh status */ 362 363 err = uhub_read_port_status(sc, portno); 364 if (err) { 365 goto error; 366 } 367 /* check if nothing is connected to the port */ 368 369 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) { 370 goto error; 371 } 372 /* check if there is no power on the port and print a warning */ 373 374 switch (udev->speed) { 375 case USB_SPEED_HIGH: 376 case USB_SPEED_FULL: 377 case USB_SPEED_LOW: 378 power_mask = UPS_PORT_POWER; 379 break; 380 case USB_SPEED_SUPER: 381 if (udev->parent_hub == NULL) 382 power_mask = UPS_PORT_POWER; 383 else 384 power_mask = UPS_PORT_POWER_SS; 385 break; 386 default: 387 power_mask = 0; 388 break; 389 } 390 if (!(sc->sc_st.port_status & power_mask)) { 391 DPRINTF("WARNING: strange, connected port %d " 392 "has no power\n", portno); 393 } 394 395 /* check if the device is in Host Mode */ 396 397 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 398 399 DPRINTF("Port %d is in Host Mode\n", portno); 400 401 if (sc->sc_st.port_status & UPS_SUSPEND) { 402 /* 403 * NOTE: Should not get here in SuperSpeed 404 * mode, because the HUB should report this 405 * bit as zero. 406 */ 407 DPRINTF("Port %d was still " 408 "suspended, clearing.\n", portno); 409 err = usbd_req_clear_port_feature(udev, 410 NULL, portno, UHF_PORT_SUSPEND); 411 } 412 413 /* USB Host Mode */ 414 415 /* wait for maximum device power up time */ 416 417 usb_pause_mtx(NULL, 418 USB_MS_TO_TICKS(USB_PORT_POWERUP_DELAY)); 419 420 /* reset port, which implies enabling it */ 421 422 err = usbd_req_reset_port(udev, NULL, portno); 423 424 if (err) { 425 DPRINTFN(0, "port %d reset " 426 "failed, error=%s\n", 427 portno, usbd_errstr(err)); 428 goto error; 429 } 430 /* get port status again, it might have changed during reset */ 431 432 err = uhub_read_port_status(sc, portno); 433 if (err) { 434 goto error; 435 } 436 /* check if something changed during port reset */ 437 438 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 439 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 440 if (timeout) { 441 DPRINTFN(0, "giving up port reset " 442 "- device vanished\n"); 443 goto error; 444 } 445 timeout = 1; 446 goto repeat; 447 } 448 } else { 449 DPRINTF("Port %d is in Device Mode\n", portno); 450 } 451 452 /* 453 * Figure out the device speed 454 */ 455 switch (udev->speed) { 456 case USB_SPEED_HIGH: 457 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 458 speed = USB_SPEED_HIGH; 459 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 460 speed = USB_SPEED_LOW; 461 else 462 speed = USB_SPEED_FULL; 463 break; 464 case USB_SPEED_FULL: 465 if (sc->sc_st.port_status & UPS_LOW_SPEED) 466 speed = USB_SPEED_LOW; 467 else 468 speed = USB_SPEED_FULL; 469 break; 470 case USB_SPEED_LOW: 471 speed = USB_SPEED_LOW; 472 break; 473 case USB_SPEED_SUPER: 474 if (udev->parent_hub == NULL) { 475 /* Root HUB - special case */ 476 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 477 case 0: 478 speed = USB_SPEED_FULL; 479 break; 480 case UPS_LOW_SPEED: 481 speed = USB_SPEED_LOW; 482 break; 483 case UPS_HIGH_SPEED: 484 speed = USB_SPEED_HIGH; 485 break; 486 default: 487 speed = USB_SPEED_SUPER; 488 break; 489 } 490 } else { 491 speed = USB_SPEED_SUPER; 492 } 493 break; 494 default: 495 /* same speed like parent */ 496 speed = udev->speed; 497 break; 498 } 499 if (speed == USB_SPEED_SUPER) { 500 err = usbd_req_set_hub_u1_timeout(udev, NULL, 501 portno, 128 - (2 * udev->depth)); 502 if (err) { 503 DPRINTFN(0, "port %d U1 timeout " 504 "failed, error=%s\n", 505 portno, usbd_errstr(err)); 506 } 507 err = usbd_req_set_hub_u2_timeout(udev, NULL, 508 portno, 128 - (2 * udev->depth)); 509 if (err) { 510 DPRINTFN(0, "port %d U2 timeout " 511 "failed, error=%s\n", 512 portno, usbd_errstr(err)); 513 } 514 } 515 516 /* 517 * Figure out the device mode 518 * 519 * NOTE: This part is currently FreeBSD specific. 520 */ 521 if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 522 mode = USB_MODE_DEVICE; 523 else 524 mode = USB_MODE_HOST; 525 526 /* need to create a new child */ 527 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 528 udev->depth + 1, portno - 1, portno, speed, mode); 529 if (child == NULL) { 530 DPRINTFN(0, "could not allocate new device\n"); 531 goto error; 532 } 533 return (0); /* success */ 534 535 error: 536 if (child != NULL) { 537 /* 538 * Free USB device and all subdevices, if any. 539 */ 540 usb_free_device(child, 0); 541 child = NULL; 542 } 543 if (err == 0) { 544 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 545 err = usbd_req_clear_port_feature( 546 sc->sc_udev, NULL, 547 portno, UHF_PORT_ENABLE); 548 } 549 } 550 if (err) { 551 DPRINTFN(0, "device problem (%s), " 552 "disabling port %d\n", usbd_errstr(err), portno); 553 } 554 return (err); 555 } 556 557 /*------------------------------------------------------------------------* 558 * usb_device_20_compatible 559 * 560 * Returns: 561 * 0: HUB does not support suspend and resume 562 * Else: HUB supports suspend and resume 563 *------------------------------------------------------------------------*/ 564 static uint8_t 565 usb_device_20_compatible(struct usb_device *udev) 566 { 567 if (udev == NULL) 568 return (0); 569 switch (udev->speed) { 570 case USB_SPEED_LOW: 571 case USB_SPEED_FULL: 572 case USB_SPEED_HIGH: 573 return (1); 574 default: 575 return (0); 576 } 577 } 578 579 /*------------------------------------------------------------------------* 580 * uhub_suspend_resume_port 581 * 582 * Returns: 583 * 0: Success 584 * Else: A control transaction failed 585 *------------------------------------------------------------------------*/ 586 static usb_error_t 587 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 588 { 589 struct usb_device *child; 590 struct usb_device *udev; 591 uint8_t is_suspend; 592 usb_error_t err; 593 594 DPRINTF("port %d\n", portno); 595 596 udev = sc->sc_udev; 597 child = usb_bus_port_get_device(udev->bus, 598 udev->hub->ports + portno - 1); 599 600 /* first clear the port suspend change bit */ 601 602 if (usb_device_20_compatible(udev)) { 603 err = usbd_req_clear_port_feature(udev, NULL, 604 portno, UHF_C_PORT_SUSPEND); 605 } else { 606 err = usbd_req_clear_port_feature(udev, NULL, 607 portno, UHF_C_PORT_LINK_STATE); 608 } 609 610 if (err) { 611 DPRINTF("clearing suspend failed.\n"); 612 goto done; 613 } 614 /* get fresh status */ 615 616 err = uhub_read_port_status(sc, portno); 617 if (err) { 618 DPRINTF("reading port status failed.\n"); 619 goto done; 620 } 621 /* convert current state */ 622 623 if (usb_device_20_compatible(udev)) { 624 if (sc->sc_st.port_status & UPS_SUSPEND) { 625 is_suspend = 1; 626 } else { 627 is_suspend = 0; 628 } 629 } else { 630 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 631 case UPS_PORT_LS_U3: 632 is_suspend = 1; 633 break; 634 case UPS_PORT_LS_SS_INA: 635 usbd_req_warm_reset_port(udev, NULL, portno); 636 is_suspend = 0; 637 break; 638 default: 639 is_suspend = 0; 640 break; 641 } 642 } 643 644 DPRINTF("suspended=%u\n", is_suspend); 645 646 /* do the suspend or resume */ 647 648 if (child) { 649 /* 650 * This code handle two cases: 1) Host Mode - we can only 651 * receive resume here 2) Device Mode - we can receive 652 * suspend and resume here 653 */ 654 if (is_suspend == 0) 655 usb_dev_resume_peer(child); 656 else if (child->flags.usb_mode == USB_MODE_DEVICE) 657 usb_dev_suspend_peer(child); 658 } 659 done: 660 return (err); 661 } 662 663 /*------------------------------------------------------------------------* 664 * uhub_root_interrupt 665 * 666 * This function is called when a Root HUB interrupt has 667 * happened. "ptr" and "len" makes up the Root HUB interrupt 668 * packet. This function is called having the "bus_mtx" locked. 669 *------------------------------------------------------------------------*/ 670 void 671 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) 672 { 673 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 674 675 usb_needs_explore(bus, 0); 676 } 677 678 static uint8_t 679 uhub_is_too_deep(struct usb_device *udev) 680 { 681 switch (udev->speed) { 682 case USB_SPEED_FULL: 683 case USB_SPEED_LOW: 684 case USB_SPEED_HIGH: 685 if (udev->depth > USB_HUB_MAX_DEPTH) 686 return (1); 687 break; 688 case USB_SPEED_SUPER: 689 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 690 return (1); 691 break; 692 default: 693 break; 694 } 695 return (0); 696 } 697 698 /*------------------------------------------------------------------------* 699 * uhub_explore 700 * 701 * Returns: 702 * 0: Success 703 * Else: Failure 704 *------------------------------------------------------------------------*/ 705 static usb_error_t 706 uhub_explore(struct usb_device *udev) 707 { 708 struct usb_hub *hub; 709 struct uhub_softc *sc; 710 struct usb_port *up; 711 usb_error_t err; 712 uint8_t portno; 713 uint8_t x; 714 715 hub = udev->hub; 716 sc = hub->hubsoftc; 717 718 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 719 720 /* ignore devices that are too deep */ 721 if (uhub_is_too_deep(udev)) 722 return (USB_ERR_TOO_DEEP); 723 724 /* check if device is suspended */ 725 if (udev->flags.self_suspended) { 726 /* need to wait until the child signals resume */ 727 DPRINTF("Device is suspended!\n"); 728 return (0); 729 } 730 731 /* 732 * Make sure we don't race against user-space applications 733 * like LibUSB: 734 */ 735 usbd_enum_lock(udev); 736 737 for (x = 0; x != hub->nports; x++) { 738 up = hub->ports + x; 739 portno = x + 1; 740 741 err = uhub_read_port_status(sc, portno); 742 if (err) { 743 /* most likely the HUB is gone */ 744 break; 745 } 746 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 747 DPRINTF("Overcurrent on port %u.\n", portno); 748 err = usbd_req_clear_port_feature( 749 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 750 if (err) { 751 /* most likely the HUB is gone */ 752 break; 753 } 754 } 755 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 756 /* 757 * Fake a connect status change so that the 758 * status gets checked initially! 759 */ 760 sc->sc_st.port_change |= 761 UPS_C_CONNECT_STATUS; 762 } 763 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 764 err = usbd_req_clear_port_feature( 765 udev, NULL, portno, UHF_C_PORT_ENABLE); 766 if (err) { 767 /* most likely the HUB is gone */ 768 break; 769 } 770 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 771 /* 772 * Ignore the port error if the device 773 * has vanished ! 774 */ 775 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 776 DPRINTFN(0, "illegal enable change, " 777 "port %d\n", portno); 778 } else { 779 780 if (up->restartcnt == USB_RESTART_MAX) { 781 /* XXX could try another speed ? */ 782 DPRINTFN(0, "port error, giving up " 783 "port %d\n", portno); 784 } else { 785 sc->sc_st.port_change |= 786 UPS_C_CONNECT_STATUS; 787 up->restartcnt++; 788 } 789 } 790 } 791 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 792 err = uhub_reattach_port(sc, portno); 793 if (err) { 794 /* most likely the HUB is gone */ 795 break; 796 } 797 } 798 if (sc->sc_st.port_change & (UPS_C_SUSPEND | 799 UPS_C_PORT_LINK_STATE)) { 800 err = uhub_suspend_resume_port(sc, portno); 801 if (err) { 802 /* most likely the HUB is gone */ 803 break; 804 } 805 } 806 err = uhub_explore_sub(sc, up); 807 if (err) { 808 /* no device(s) present */ 809 continue; 810 } 811 /* explore succeeded - reset restart counter */ 812 up->restartcnt = 0; 813 } 814 815 usbd_enum_unlock(udev); 816 817 /* initial status checked */ 818 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 819 820 /* return success */ 821 return (USB_ERR_NORMAL_COMPLETION); 822 } 823 824 static int 825 uhub_probe(device_t dev) 826 { 827 struct usb_attach_arg *uaa = device_get_ivars(dev); 828 829 if (uaa->usb_mode != USB_MODE_HOST) 830 return (ENXIO); 831 832 /* 833 * The subclass for USB HUBs is currently ignored because it 834 * is 0 for some and 1 for others. 835 */ 836 if (uaa->info.bConfigIndex == 0 && 837 uaa->info.bDeviceClass == UDCLASS_HUB) 838 return (0); 839 840 return (ENXIO); 841 } 842 843 /* NOTE: The information returned by this function can be wrong. */ 844 usb_error_t 845 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 846 { 847 struct usb_hub_descriptor hubdesc20; 848 struct usb_hub_ss_descriptor hubdesc30; 849 usb_error_t err; 850 uint8_t nports; 851 uint8_t tt; 852 853 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 854 return (USB_ERR_INVAL); 855 856 nports = 0; 857 tt = 0; 858 859 switch (udev->speed) { 860 case USB_SPEED_LOW: 861 case USB_SPEED_FULL: 862 case USB_SPEED_HIGH: 863 /* assuming that there is one port */ 864 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 865 if (err) { 866 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 867 "error=%s\n", usbd_errstr(err)); 868 break; 869 } 870 nports = hubdesc20.bNbrPorts; 871 if (nports > 127) 872 nports = 127; 873 874 if (udev->speed == USB_SPEED_HIGH) 875 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 876 break; 877 878 case USB_SPEED_SUPER: 879 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 880 if (err) { 881 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 882 "error=%s\n", usbd_errstr(err)); 883 break; 884 } 885 nports = hubdesc30.bNbrPorts; 886 if (nports > 16) 887 nports = 16; 888 break; 889 890 default: 891 err = USB_ERR_INVAL; 892 break; 893 } 894 895 if (pnports != NULL) 896 *pnports = nports; 897 898 if (ptt != NULL) 899 *ptt = tt; 900 901 return (err); 902 } 903 904 static int 905 uhub_attach(device_t dev) 906 { 907 struct uhub_softc *sc = device_get_softc(dev); 908 struct usb_attach_arg *uaa = device_get_ivars(dev); 909 struct usb_device *udev = uaa->device; 910 struct usb_device *parent_hub = udev->parent_hub; 911 struct usb_hub *hub; 912 struct usb_hub_descriptor hubdesc20; 913 struct usb_hub_ss_descriptor hubdesc30; 914 uint16_t pwrdly; 915 uint8_t x; 916 uint8_t nports; 917 uint8_t portno; 918 uint8_t removable; 919 uint8_t iface_index; 920 usb_error_t err; 921 922 sc->sc_udev = udev; 923 sc->sc_dev = dev; 924 925 mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); 926 927 snprintf(sc->sc_name, sizeof(sc->sc_name), "%s", 928 device_get_nameunit(dev)); 929 930 device_set_usb_desc(dev); 931 932 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 933 "parent->selfpowered=%d\n", 934 udev->depth, 935 udev->flags.self_powered, 936 parent_hub, 937 parent_hub ? 938 parent_hub->flags.self_powered : 0); 939 940 if (uhub_is_too_deep(udev)) { 941 DPRINTFN(0, "HUB at depth %d, " 942 "exceeds maximum. HUB ignored\n", (int)udev->depth); 943 goto error; 944 } 945 946 if (!udev->flags.self_powered && parent_hub && 947 !parent_hub->flags.self_powered) { 948 DPRINTFN(0, "Bus powered HUB connected to " 949 "bus powered HUB. HUB ignored\n"); 950 goto error; 951 } 952 953 if (UHUB_IS_MULTI_TT(sc)) { 954 err = usbd_set_alt_interface_index(udev, 0, 1); 955 if (err) { 956 device_printf(dev, "MTT could not be enabled\n"); 957 goto error; 958 } 959 device_printf(dev, "MTT enabled\n"); 960 } 961 962 /* get HUB descriptor */ 963 964 DPRINTFN(2, "Getting HUB descriptor\n"); 965 966 switch (udev->speed) { 967 case USB_SPEED_LOW: 968 case USB_SPEED_FULL: 969 case USB_SPEED_HIGH: 970 /* assuming that there is one port */ 971 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 972 if (err) { 973 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 974 "error=%s\n", usbd_errstr(err)); 975 goto error; 976 } 977 /* get number of ports */ 978 nports = hubdesc20.bNbrPorts; 979 980 /* get power delay */ 981 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 982 USB_EXTRA_POWER_UP_TIME); 983 984 /* get complete HUB descriptor */ 985 if (nports >= 8) { 986 /* check number of ports */ 987 if (nports > 127) { 988 DPRINTFN(0, "Invalid number of USB 2.0 ports," 989 "error=%s\n", usbd_errstr(err)); 990 goto error; 991 } 992 /* get complete HUB descriptor */ 993 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 994 995 if (err) { 996 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 997 "error=%s\n", usbd_errstr(err)); 998 goto error; 999 } 1000 if (hubdesc20.bNbrPorts != nports) { 1001 DPRINTFN(0, "Number of ports changed\n"); 1002 goto error; 1003 } 1004 } 1005 break; 1006 case USB_SPEED_SUPER: 1007 if (udev->parent_hub != NULL) { 1008 err = usbd_req_set_hub_depth(udev, NULL, 1009 udev->depth - 1); 1010 if (err) { 1011 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 1012 "error=%s\n", usbd_errstr(err)); 1013 goto error; 1014 } 1015 } 1016 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1017 if (err) { 1018 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1019 "error=%s\n", usbd_errstr(err)); 1020 goto error; 1021 } 1022 /* get number of ports */ 1023 nports = hubdesc30.bNbrPorts; 1024 1025 /* get power delay */ 1026 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1027 USB_EXTRA_POWER_UP_TIME); 1028 1029 /* get complete HUB descriptor */ 1030 if (nports >= 8) { 1031 /* check number of ports */ 1032 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 1033 DPRINTFN(0, "Invalid number of USB 3.0 ports," 1034 "error=%s\n", usbd_errstr(err)); 1035 goto error; 1036 } 1037 /* get complete HUB descriptor */ 1038 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 1039 1040 if (err) { 1041 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1042 "error=%s\n", usbd_errstr(err)); 1043 goto error; 1044 } 1045 if (hubdesc30.bNbrPorts != nports) { 1046 DPRINTFN(0, "Number of ports changed\n"); 1047 goto error; 1048 } 1049 } 1050 break; 1051 default: 1052 DPRINTF("Assuming HUB has only one port\n"); 1053 /* default number of ports */ 1054 nports = 1; 1055 /* default power delay */ 1056 pwrdly = ((10 * UHD_PWRON_FACTOR) + USB_EXTRA_POWER_UP_TIME); 1057 break; 1058 } 1059 if (nports == 0) { 1060 DPRINTFN(0, "portless HUB\n"); 1061 goto error; 1062 } 1063 hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1064 M_USBDEV, M_WAITOK | M_ZERO); 1065 1066 if (hub == NULL) { 1067 goto error; 1068 } 1069 udev->hub = hub; 1070 1071 /* initialize HUB structure */ 1072 hub->hubsoftc = sc; 1073 hub->explore = &uhub_explore; 1074 hub->nports = nports; 1075 hub->hubudev = udev; 1076 1077 /* if self powered hub, give ports maximum current */ 1078 if (udev->flags.self_powered) { 1079 hub->portpower = USB_MAX_POWER; 1080 } else { 1081 hub->portpower = USB_MIN_POWER; 1082 } 1083 1084 /* set up interrupt pipe */ 1085 iface_index = 0; 1086 if (udev->parent_hub == NULL) { 1087 /* root HUB is special */ 1088 err = 0; 1089 } else { 1090 /* normal HUB */ 1091 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1092 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); 1093 } 1094 if (err) { 1095 DPRINTFN(0, "cannot setup interrupt transfer, " 1096 "errstr=%s\n", usbd_errstr(err)); 1097 goto error; 1098 } 1099 /* wait with power off for a while */ 1100 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1101 1102 /* 1103 * To have the best chance of success we do things in the exact same 1104 * order as Windoze98. This should not be necessary, but some 1105 * devices do not follow the USB specs to the letter. 1106 * 1107 * These are the events on the bus when a hub is attached: 1108 * Get device and config descriptors (see attach code) 1109 * Get hub descriptor (see above) 1110 * For all ports 1111 * turn on power 1112 * wait for power to become stable 1113 * (all below happens in explore code) 1114 * For all ports 1115 * clear C_PORT_CONNECTION 1116 * For all ports 1117 * get port status 1118 * if device connected 1119 * wait 100 ms 1120 * turn on reset 1121 * wait 1122 * clear C_PORT_RESET 1123 * get port status 1124 * proceed with device attachment 1125 */ 1126 1127 /* XXX should check for none, individual, or ganged power? */ 1128 1129 removable = 0; 1130 1131 for (x = 0; x != nports; x++) { 1132 /* set up data structures */ 1133 struct usb_port *up = hub->ports + x; 1134 1135 up->device_index = 0; 1136 up->restartcnt = 0; 1137 portno = x + 1; 1138 1139 /* check if port is removable */ 1140 switch (udev->speed) { 1141 case USB_SPEED_LOW: 1142 case USB_SPEED_FULL: 1143 case USB_SPEED_HIGH: 1144 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1145 removable++; 1146 break; 1147 case USB_SPEED_SUPER: 1148 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1149 removable++; 1150 break; 1151 default: 1152 DPRINTF("Assuming removable port\n"); 1153 removable++; 1154 break; 1155 } 1156 if (!err) { 1157 /* turn the power on */ 1158 err = usbd_req_set_port_feature(udev, NULL, 1159 portno, UHF_PORT_POWER); 1160 } 1161 if (err) { 1162 DPRINTFN(0, "port %d power on failed, %s\n", 1163 portno, usbd_errstr(err)); 1164 } 1165 DPRINTF("turn on port %d power\n", 1166 portno); 1167 1168 /* wait for stable power */ 1169 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1170 } 1171 1172 device_printf(dev, "%d port%s with %d " 1173 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1174 removable, udev->flags.self_powered ? "self" : "bus"); 1175 1176 /* Start the interrupt endpoint, if any */ 1177 1178 if (sc->sc_xfer[0] != NULL) { 1179 mtx_lock(&sc->sc_mtx); 1180 usbd_transfer_start(sc->sc_xfer[0]); 1181 mtx_unlock(&sc->sc_mtx); 1182 } 1183 1184 /* Enable automatic power save on all USB HUBs */ 1185 1186 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1187 1188 return (0); 1189 1190 error: 1191 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1192 1193 if (udev->hub) { 1194 free(udev->hub, M_USBDEV); 1195 udev->hub = NULL; 1196 } 1197 1198 mtx_destroy(&sc->sc_mtx); 1199 1200 return (ENXIO); 1201 } 1202 1203 /* 1204 * Called from process context when the hub is gone. 1205 * Detach all devices on active ports. 1206 */ 1207 static int 1208 uhub_detach(device_t dev) 1209 { 1210 struct uhub_softc *sc = device_get_softc(dev); 1211 struct usb_hub *hub = sc->sc_udev->hub; 1212 struct usb_device *child; 1213 uint8_t x; 1214 1215 if (hub == NULL) /* must be partially working */ 1216 return (0); 1217 1218 /* Make sure interrupt transfer is gone. */ 1219 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1220 1221 /* Detach all ports */ 1222 for (x = 0; x != hub->nports; x++) { 1223 1224 child = usb_bus_port_get_device(sc->sc_udev->bus, hub->ports + x); 1225 1226 if (child == NULL) { 1227 continue; 1228 } 1229 1230 /* 1231 * Free USB device and all subdevices, if any. 1232 */ 1233 usb_free_device(child, 0); 1234 } 1235 1236 free(hub, M_USBDEV); 1237 sc->sc_udev->hub = NULL; 1238 1239 mtx_destroy(&sc->sc_mtx); 1240 1241 return (0); 1242 } 1243 1244 static int 1245 uhub_suspend(device_t dev) 1246 { 1247 DPRINTF("\n"); 1248 /* Sub-devices are not suspended here! */ 1249 return (0); 1250 } 1251 1252 static int 1253 uhub_resume(device_t dev) 1254 { 1255 DPRINTF("\n"); 1256 /* Sub-devices are not resumed here! */ 1257 return (0); 1258 } 1259 1260 static void 1261 uhub_driver_added(device_t dev, driver_t *driver) 1262 { 1263 usb_needs_explore_all(); 1264 } 1265 1266 struct hub_result { 1267 struct usb_device *udev; 1268 uint8_t portno; 1269 uint8_t iface_index; 1270 }; 1271 1272 static void 1273 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1274 struct hub_result *res) 1275 { 1276 struct usb_interface *iface; 1277 struct usb_device *udev; 1278 uint8_t nports; 1279 uint8_t x; 1280 uint8_t i; 1281 1282 nports = hub->nports; 1283 for (x = 0; x != nports; x++) { 1284 udev = usb_bus_port_get_device(hub->hubudev->bus, 1285 hub->ports + x); 1286 if (!udev) { 1287 continue; 1288 } 1289 for (i = 0; i != USB_IFACE_MAX; i++) { 1290 iface = usbd_get_iface(udev, i); 1291 if (iface && 1292 (iface->subdev == child)) { 1293 res->iface_index = i; 1294 res->udev = udev; 1295 res->portno = x + 1; 1296 return; 1297 } 1298 } 1299 } 1300 res->iface_index = 0; 1301 res->udev = NULL; 1302 res->portno = 0; 1303 } 1304 1305 static int 1306 uhub_child_location_string(device_t parent, device_t child, 1307 char *buf, size_t buflen) 1308 { 1309 struct uhub_softc *sc; 1310 struct usb_hub *hub; 1311 struct hub_result res; 1312 1313 if (!device_is_attached(parent)) { 1314 if (buflen) 1315 buf[0] = 0; 1316 return (0); 1317 } 1318 1319 sc = device_get_softc(parent); 1320 hub = sc->sc_udev->hub; 1321 1322 mtx_lock(&Giant); 1323 uhub_find_iface_index(hub, child, &res); 1324 if (!res.udev) { 1325 DPRINTF("device not on hub\n"); 1326 if (buflen) { 1327 buf[0] = '\0'; 1328 } 1329 goto done; 1330 } 1331 snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u interface=%u", 1332 (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0, 1333 res.portno, device_get_unit(res.udev->bus->bdev), 1334 res.udev->device_index, res.iface_index); 1335 done: 1336 mtx_unlock(&Giant); 1337 1338 return (0); 1339 } 1340 1341 static int 1342 uhub_child_pnpinfo_string(device_t parent, device_t child, 1343 char *buf, size_t buflen) 1344 { 1345 struct uhub_softc *sc; 1346 struct usb_hub *hub; 1347 struct usb_interface *iface; 1348 struct hub_result res; 1349 1350 if (!device_is_attached(parent)) { 1351 if (buflen) 1352 buf[0] = 0; 1353 return (0); 1354 } 1355 1356 sc = device_get_softc(parent); 1357 hub = sc->sc_udev->hub; 1358 1359 mtx_lock(&Giant); 1360 uhub_find_iface_index(hub, child, &res); 1361 if (!res.udev) { 1362 DPRINTF("device not on hub\n"); 1363 if (buflen) { 1364 buf[0] = '\0'; 1365 } 1366 goto done; 1367 } 1368 iface = usbd_get_iface(res.udev, res.iface_index); 1369 if (iface && iface->idesc) { 1370 snprintf(buf, buflen, "vendor=0x%04x product=0x%04x " 1371 "devclass=0x%02x devsubclass=0x%02x " 1372 "sernum=\"%s\" " 1373 "release=0x%04x " 1374 "mode=%s " 1375 "intclass=0x%02x intsubclass=0x%02x " 1376 "intprotocol=0x%02x " "%s%s", 1377 UGETW(res.udev->ddesc.idVendor), 1378 UGETW(res.udev->ddesc.idProduct), 1379 res.udev->ddesc.bDeviceClass, 1380 res.udev->ddesc.bDeviceSubClass, 1381 usb_get_serial(res.udev), 1382 UGETW(res.udev->ddesc.bcdDevice), 1383 (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 1384 iface->idesc->bInterfaceClass, 1385 iface->idesc->bInterfaceSubClass, 1386 iface->idesc->bInterfaceProtocol, 1387 iface->pnpinfo ? " " : "", 1388 iface->pnpinfo ? iface->pnpinfo : ""); 1389 } else { 1390 if (buflen) { 1391 buf[0] = '\0'; 1392 } 1393 goto done; 1394 } 1395 done: 1396 mtx_unlock(&Giant); 1397 1398 return (0); 1399 } 1400 1401 /* 1402 * The USB Transaction Translator: 1403 * =============================== 1404 * 1405 * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed 1406 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1407 * USB transfers. To utilize bandwidth dynamically the "scatter and 1408 * gather" principle must be applied. This means that bandwidth must 1409 * be divided into equal parts of bandwidth. With regard to USB all 1410 * data is transferred in smaller packets with length 1411 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1412 * not a constant! 1413 * 1414 * The bandwidth scheduler which I have implemented will simply pack 1415 * the USB transfers back to back until there is no more space in the 1416 * schedule. Out of the 8 microframes which the USB 2.0 standard 1417 * provides, only 6 are available for non-HIGH-speed devices. I have 1418 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1419 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1420 * this division, it is very difficult to allocate and free bandwidth 1421 * dynamically. 1422 * 1423 * NOTE about the Transaction Translator in USB HUBs: 1424 * 1425 * USB HUBs have a very simple Transaction Translator, that will 1426 * simply pipeline all the SPLIT transactions. That means that the 1427 * transactions will be executed in the order they are queued! 1428 * 1429 */ 1430 1431 /*------------------------------------------------------------------------* 1432 * usb_intr_find_best_slot 1433 * 1434 * Return value: 1435 * The best Transaction Translation slot for an interrupt endpoint. 1436 *------------------------------------------------------------------------*/ 1437 static uint8_t 1438 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1439 uint8_t end, uint8_t mask) 1440 { 1441 usb_size_t min = (usb_size_t)-1; 1442 usb_size_t sum; 1443 uint8_t x; 1444 uint8_t y; 1445 uint8_t z; 1446 1447 y = 0; 1448 1449 /* find the last slot with lesser used bandwidth */ 1450 1451 for (x = start; x < end; x++) { 1452 1453 sum = 0; 1454 1455 /* compute sum of bandwidth */ 1456 for (z = x; z < end; z++) { 1457 if (mask & (1U << (z - x))) 1458 sum += ptr[z]; 1459 } 1460 1461 /* check if the current multi-slot is more optimal */ 1462 if (min >= sum) { 1463 min = sum; 1464 y = x; 1465 } 1466 1467 /* check if the mask is about to be shifted out */ 1468 if (mask & (1U << (end - 1 - x))) 1469 break; 1470 } 1471 return (y); 1472 } 1473 1474 /*------------------------------------------------------------------------* 1475 * usb_hs_bandwidth_adjust 1476 * 1477 * This function will update the bandwith usage for the microframe 1478 * having index "slot" by "len" bytes. "len" can be negative. If the 1479 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1480 * the "slot" argument will be replaced by the slot having least used 1481 * bandwidth. The "mask" argument is used for multi-slot allocations. 1482 * 1483 * Returns: 1484 * The slot in which the bandwidth update was done: 0..7 1485 *------------------------------------------------------------------------*/ 1486 static uint8_t 1487 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1488 uint8_t slot, uint8_t mask) 1489 { 1490 struct usb_bus *bus = udev->bus; 1491 struct usb_hub *hub; 1492 enum usb_dev_speed speed; 1493 uint8_t x; 1494 1495 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1496 1497 speed = usbd_get_speed(udev); 1498 1499 switch (speed) { 1500 case USB_SPEED_LOW: 1501 case USB_SPEED_FULL: 1502 if (speed == USB_SPEED_LOW) { 1503 len *= 8; 1504 } 1505 /* 1506 * The Host Controller Driver should have 1507 * performed checks so that the lookup 1508 * below does not result in a NULL pointer 1509 * access. 1510 */ 1511 1512 hub = udev->parent_hs_hub->hub; 1513 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1514 slot = usb_intr_find_best_slot(hub->uframe_usage, 1515 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1516 } 1517 for (x = slot; x < 8; x++) { 1518 if (mask & (1U << (x - slot))) { 1519 hub->uframe_usage[x] += len; 1520 bus->uframe_usage[x] += len; 1521 } 1522 } 1523 break; 1524 default: 1525 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1526 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1527 USB_HS_MICRO_FRAMES_MAX, mask); 1528 } 1529 for (x = slot; x < 8; x++) { 1530 if (mask & (1U << (x - slot))) { 1531 bus->uframe_usage[x] += len; 1532 } 1533 } 1534 break; 1535 } 1536 return (slot); 1537 } 1538 1539 /*------------------------------------------------------------------------* 1540 * usb_hs_bandwidth_alloc 1541 * 1542 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1543 *------------------------------------------------------------------------*/ 1544 void 1545 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1546 { 1547 struct usb_device *udev; 1548 uint8_t slot; 1549 uint8_t mask; 1550 uint8_t speed; 1551 1552 udev = xfer->xroot->udev; 1553 1554 if (udev->flags.usb_mode != USB_MODE_HOST) 1555 return; /* not supported */ 1556 1557 xfer->endpoint->refcount_bw++; 1558 if (xfer->endpoint->refcount_bw != 1) 1559 return; /* already allocated */ 1560 1561 speed = usbd_get_speed(udev); 1562 1563 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1564 case UE_INTERRUPT: 1565 /* allocate a microframe slot */ 1566 1567 mask = 0x01; 1568 slot = usb_hs_bandwidth_adjust(udev, 1569 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1570 1571 xfer->endpoint->usb_uframe = slot; 1572 xfer->endpoint->usb_smask = mask << slot; 1573 1574 if ((speed != USB_SPEED_FULL) && 1575 (speed != USB_SPEED_LOW)) { 1576 xfer->endpoint->usb_cmask = 0x00 ; 1577 } else { 1578 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1579 } 1580 break; 1581 1582 case UE_ISOCHRONOUS: 1583 switch (usbd_xfer_get_fps_shift(xfer)) { 1584 case 0: 1585 mask = 0xFF; 1586 break; 1587 case 1: 1588 mask = 0x55; 1589 break; 1590 case 2: 1591 mask = 0x11; 1592 break; 1593 default: 1594 mask = 0x01; 1595 break; 1596 } 1597 1598 /* allocate a microframe multi-slot */ 1599 1600 slot = usb_hs_bandwidth_adjust(udev, 1601 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1602 1603 xfer->endpoint->usb_uframe = slot; 1604 xfer->endpoint->usb_cmask = 0; 1605 xfer->endpoint->usb_smask = mask << slot; 1606 break; 1607 1608 default: 1609 xfer->endpoint->usb_uframe = 0; 1610 xfer->endpoint->usb_cmask = 0; 1611 xfer->endpoint->usb_smask = 0; 1612 break; 1613 } 1614 1615 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1616 xfer->endpoint->usb_uframe, 1617 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1618 } 1619 1620 /*------------------------------------------------------------------------* 1621 * usb_hs_bandwidth_free 1622 * 1623 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1624 *------------------------------------------------------------------------*/ 1625 void 1626 usb_hs_bandwidth_free(struct usb_xfer *xfer) 1627 { 1628 struct usb_device *udev; 1629 uint8_t slot; 1630 uint8_t mask; 1631 1632 udev = xfer->xroot->udev; 1633 1634 if (udev->flags.usb_mode != USB_MODE_HOST) 1635 return; /* not supported */ 1636 1637 xfer->endpoint->refcount_bw--; 1638 if (xfer->endpoint->refcount_bw != 0) 1639 return; /* still allocated */ 1640 1641 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1642 case UE_INTERRUPT: 1643 case UE_ISOCHRONOUS: 1644 1645 slot = xfer->endpoint->usb_uframe; 1646 mask = xfer->endpoint->usb_smask; 1647 1648 /* free microframe slot(s): */ 1649 usb_hs_bandwidth_adjust(udev, 1650 -xfer->max_frame_size, slot, mask >> slot); 1651 1652 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1653 slot, mask >> slot); 1654 1655 xfer->endpoint->usb_uframe = 0; 1656 xfer->endpoint->usb_cmask = 0; 1657 xfer->endpoint->usb_smask = 0; 1658 break; 1659 1660 default: 1661 break; 1662 } 1663 } 1664 1665 /*------------------------------------------------------------------------* 1666 * usb_isoc_time_expand 1667 * 1668 * This function will expand the time counter from 7-bit to 16-bit. 1669 * 1670 * Returns: 1671 * 16-bit isochronous time counter. 1672 *------------------------------------------------------------------------*/ 1673 uint16_t 1674 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 1675 { 1676 uint16_t rem; 1677 1678 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1679 1680 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 1681 1682 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 1683 1684 if (isoc_time_curr < rem) { 1685 /* the time counter wrapped around */ 1686 bus->isoc_time_last += USB_ISOC_TIME_MAX; 1687 } 1688 /* update the remainder */ 1689 1690 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 1691 bus->isoc_time_last |= isoc_time_curr; 1692 1693 return (bus->isoc_time_last); 1694 } 1695 1696 /*------------------------------------------------------------------------* 1697 * usbd_fs_isoc_schedule_alloc_slot 1698 * 1699 * This function will allocate bandwidth for an isochronous FULL speed 1700 * transaction in the FULL speed schedule. 1701 * 1702 * Returns: 1703 * <8: Success 1704 * Else: Error 1705 *------------------------------------------------------------------------*/ 1706 #if USB_HAVE_TT_SUPPORT 1707 uint8_t 1708 usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time) 1709 { 1710 struct usb_xfer *xfer; 1711 struct usb_xfer *pipe_xfer; 1712 struct usb_bus *bus; 1713 usb_frlength_t len; 1714 usb_frlength_t data_len; 1715 uint16_t delta; 1716 uint16_t slot; 1717 uint8_t retval; 1718 1719 data_len = 0; 1720 slot = 0; 1721 1722 bus = isoc_xfer->xroot->bus; 1723 1724 TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) { 1725 1726 /* skip self, if any */ 1727 1728 if (xfer == isoc_xfer) 1729 continue; 1730 1731 /* check if this USB transfer is going through the same TT */ 1732 1733 if (xfer->xroot->udev->parent_hs_hub != 1734 isoc_xfer->xroot->udev->parent_hs_hub) { 1735 continue; 1736 } 1737 if ((isoc_xfer->xroot->udev->parent_hs_hub-> 1738 ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) && 1739 (xfer->xroot->udev->hs_port_no != 1740 isoc_xfer->xroot->udev->hs_port_no)) { 1741 continue; 1742 } 1743 if (xfer->endpoint->methods != isoc_xfer->endpoint->methods) 1744 continue; 1745 1746 /* check if isoc_time is part of this transfer */ 1747 1748 delta = xfer->isoc_time_complete - isoc_time; 1749 if (delta > 0 && delta <= xfer->nframes) { 1750 delta = xfer->nframes - delta; 1751 1752 len = xfer->frlengths[delta]; 1753 len += 8; 1754 len *= 7; 1755 len /= 6; 1756 1757 data_len += len; 1758 } 1759 1760 /* check double buffered transfers */ 1761 1762 TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q.head, 1763 wait_entry) { 1764 1765 /* skip self, if any */ 1766 1767 if (pipe_xfer == isoc_xfer) 1768 continue; 1769 1770 /* check if isoc_time is part of this transfer */ 1771 1772 delta = pipe_xfer->isoc_time_complete - isoc_time; 1773 if (delta > 0 && delta <= pipe_xfer->nframes) { 1774 delta = pipe_xfer->nframes - delta; 1775 1776 len = pipe_xfer->frlengths[delta]; 1777 len += 8; 1778 len *= 7; 1779 len /= 6; 1780 1781 data_len += len; 1782 } 1783 } 1784 } 1785 1786 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 1787 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 1788 slot++; 1789 } 1790 1791 /* check for overflow */ 1792 1793 if (slot >= USB_FS_ISOC_UFRAME_MAX) 1794 return (255); 1795 1796 retval = slot; 1797 1798 delta = isoc_xfer->isoc_time_complete - isoc_time; 1799 if (delta > 0 && delta <= isoc_xfer->nframes) { 1800 delta = isoc_xfer->nframes - delta; 1801 1802 len = isoc_xfer->frlengths[delta]; 1803 len += 8; 1804 len *= 7; 1805 len /= 6; 1806 1807 data_len += len; 1808 } 1809 1810 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 1811 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 1812 slot++; 1813 } 1814 1815 /* check for overflow */ 1816 1817 if (slot >= USB_FS_ISOC_UFRAME_MAX) 1818 return (255); 1819 1820 return (retval); 1821 } 1822 #endif 1823 1824 /*------------------------------------------------------------------------* 1825 * usb_bus_port_get_device 1826 * 1827 * This function is NULL safe. 1828 *------------------------------------------------------------------------*/ 1829 struct usb_device * 1830 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 1831 { 1832 if ((bus == NULL) || (up == NULL)) { 1833 /* be NULL safe */ 1834 return (NULL); 1835 } 1836 if (up->device_index == 0) { 1837 /* nothing to do */ 1838 return (NULL); 1839 } 1840 return (bus->devices[up->device_index]); 1841 } 1842 1843 /*------------------------------------------------------------------------* 1844 * usb_bus_port_set_device 1845 * 1846 * This function is NULL safe. 1847 *------------------------------------------------------------------------*/ 1848 void 1849 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 1850 struct usb_device *udev, uint8_t device_index) 1851 { 1852 if (bus == NULL) { 1853 /* be NULL safe */ 1854 return; 1855 } 1856 /* 1857 * There is only one case where we don't 1858 * have an USB port, and that is the Root Hub! 1859 */ 1860 if (up) { 1861 if (udev) { 1862 up->device_index = device_index; 1863 } else { 1864 device_index = up->device_index; 1865 up->device_index = 0; 1866 } 1867 } 1868 /* 1869 * Make relationships to our new device 1870 */ 1871 if (device_index != 0) { 1872 #if USB_HAVE_UGEN 1873 mtx_lock(&usb_ref_lock); 1874 #endif 1875 bus->devices[device_index] = udev; 1876 #if USB_HAVE_UGEN 1877 mtx_unlock(&usb_ref_lock); 1878 #endif 1879 } 1880 /* 1881 * Debug print 1882 */ 1883 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 1884 } 1885 1886 /*------------------------------------------------------------------------* 1887 * usb_needs_explore 1888 * 1889 * This functions is called when the USB event thread needs to run. 1890 *------------------------------------------------------------------------*/ 1891 void 1892 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 1893 { 1894 uint8_t do_unlock; 1895 1896 DPRINTF("\n"); 1897 1898 if (bus == NULL) { 1899 DPRINTF("No bus pointer!\n"); 1900 return; 1901 } 1902 if ((bus->devices == NULL) || 1903 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 1904 DPRINTF("No root HUB\n"); 1905 return; 1906 } 1907 if (mtx_owned(&bus->bus_mtx)) { 1908 do_unlock = 0; 1909 } else { 1910 USB_BUS_LOCK(bus); 1911 do_unlock = 1; 1912 } 1913 if (do_probe) { 1914 bus->do_probe = 1; 1915 } 1916 if (usb_proc_msignal(&bus->explore_proc, 1917 &bus->explore_msg[0], &bus->explore_msg[1])) { 1918 /* ignore */ 1919 } 1920 if (do_unlock) { 1921 USB_BUS_UNLOCK(bus); 1922 } 1923 } 1924 1925 /*------------------------------------------------------------------------* 1926 * usb_needs_explore_all 1927 * 1928 * This function is called whenever a new driver is loaded and will 1929 * cause that all USB busses are re-explored. 1930 *------------------------------------------------------------------------*/ 1931 void 1932 usb_needs_explore_all(void) 1933 { 1934 struct usb_bus *bus; 1935 devclass_t dc; 1936 device_t dev; 1937 int max; 1938 1939 DPRINTFN(3, "\n"); 1940 1941 dc = usb_devclass_ptr; 1942 if (dc == NULL) { 1943 DPRINTFN(0, "no devclass\n"); 1944 return; 1945 } 1946 /* 1947 * Explore all USB busses in parallell. 1948 */ 1949 max = devclass_get_maxunit(dc); 1950 while (max >= 0) { 1951 dev = devclass_get_device(dc, max); 1952 if (dev) { 1953 bus = device_get_softc(dev); 1954 if (bus) { 1955 usb_needs_explore(bus, 1); 1956 } 1957 } 1958 max--; 1959 } 1960 } 1961 1962 /*------------------------------------------------------------------------* 1963 * usb_bus_power_update 1964 * 1965 * This function will ensure that all USB devices on the given bus are 1966 * properly suspended or resumed according to the device transfer 1967 * state. 1968 *------------------------------------------------------------------------*/ 1969 #if USB_HAVE_POWERD 1970 void 1971 usb_bus_power_update(struct usb_bus *bus) 1972 { 1973 usb_needs_explore(bus, 0 /* no probe */ ); 1974 } 1975 #endif 1976 1977 /*------------------------------------------------------------------------* 1978 * usbd_transfer_power_ref 1979 * 1980 * This function will modify the power save reference counts and 1981 * wakeup the USB device associated with the given USB transfer, if 1982 * needed. 1983 *------------------------------------------------------------------------*/ 1984 #if USB_HAVE_POWERD 1985 void 1986 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 1987 { 1988 static const usb_power_mask_t power_mask[4] = { 1989 [UE_CONTROL] = USB_HW_POWER_CONTROL, 1990 [UE_BULK] = USB_HW_POWER_BULK, 1991 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 1992 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 1993 }; 1994 struct usb_device *udev; 1995 uint8_t needs_explore; 1996 uint8_t needs_hw_power; 1997 uint8_t xfer_type; 1998 1999 udev = xfer->xroot->udev; 2000 2001 if (udev->device_index == USB_ROOT_HUB_ADDR) { 2002 /* no power save for root HUB */ 2003 return; 2004 } 2005 USB_BUS_LOCK(udev->bus); 2006 2007 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 2008 2009 udev->pwr_save.last_xfer_time = ticks; 2010 udev->pwr_save.type_refs[xfer_type] += val; 2011 2012 if (xfer->flags_int.control_xfr) { 2013 udev->pwr_save.read_refs += val; 2014 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 2015 /* 2016 * It is not allowed to suspend during a 2017 * control transfer: 2018 */ 2019 udev->pwr_save.write_refs += val; 2020 } 2021 } else if (USB_GET_DATA_ISREAD(xfer)) { 2022 udev->pwr_save.read_refs += val; 2023 } else { 2024 udev->pwr_save.write_refs += val; 2025 } 2026 2027 if (val > 0) { 2028 if (udev->flags.self_suspended) 2029 needs_explore = usb_peer_should_wakeup(udev); 2030 else 2031 needs_explore = 0; 2032 2033 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2034 DPRINTF("Adding type %u to power state\n", xfer_type); 2035 udev->bus->hw_power_state |= power_mask[xfer_type]; 2036 needs_hw_power = 1; 2037 } else { 2038 needs_hw_power = 0; 2039 } 2040 } else { 2041 needs_explore = 0; 2042 needs_hw_power = 0; 2043 } 2044 2045 USB_BUS_UNLOCK(udev->bus); 2046 2047 if (needs_explore) { 2048 DPRINTF("update\n"); 2049 usb_bus_power_update(udev->bus); 2050 } else if (needs_hw_power) { 2051 DPRINTF("needs power\n"); 2052 if (udev->bus->methods->set_hw_power != NULL) { 2053 (udev->bus->methods->set_hw_power) (udev->bus); 2054 } 2055 } 2056 } 2057 #endif 2058 2059 /*------------------------------------------------------------------------* 2060 * usb_peer_should_wakeup 2061 * 2062 * This function returns non-zero if the current device should wake up. 2063 *------------------------------------------------------------------------*/ 2064 static uint8_t 2065 usb_peer_should_wakeup(struct usb_device *udev) 2066 { 2067 return ((udev->power_mode == USB_POWER_MODE_ON) || 2068 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2069 (udev->re_enumerate_wait != 0) || 2070 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2071 (udev->pwr_save.write_refs != 0) || 2072 ((udev->pwr_save.read_refs != 0) && 2073 (udev->flags.usb_mode == USB_MODE_HOST) && 2074 (usb_peer_can_wakeup(udev) == 0))); 2075 } 2076 2077 /*------------------------------------------------------------------------* 2078 * usb_bus_powerd 2079 * 2080 * This function implements the USB power daemon and is called 2081 * regularly from the USB explore thread. 2082 *------------------------------------------------------------------------*/ 2083 #if USB_HAVE_POWERD 2084 void 2085 usb_bus_powerd(struct usb_bus *bus) 2086 { 2087 struct usb_device *udev; 2088 usb_ticks_t temp; 2089 usb_ticks_t limit; 2090 usb_ticks_t mintime; 2091 usb_size_t type_refs[5]; 2092 uint8_t x; 2093 2094 limit = usb_power_timeout; 2095 if (limit == 0) 2096 limit = hz; 2097 else if (limit > 255) 2098 limit = 255 * hz; 2099 else 2100 limit = limit * hz; 2101 2102 DPRINTF("bus=%p\n", bus); 2103 2104 USB_BUS_LOCK(bus); 2105 2106 /* 2107 * The root HUB device is never suspended 2108 * and we simply skip it. 2109 */ 2110 for (x = USB_ROOT_HUB_ADDR + 1; 2111 x != bus->devices_max; x++) { 2112 2113 udev = bus->devices[x]; 2114 if (udev == NULL) 2115 continue; 2116 2117 temp = ticks - udev->pwr_save.last_xfer_time; 2118 2119 if (usb_peer_should_wakeup(udev)) { 2120 /* check if we are suspended */ 2121 if (udev->flags.self_suspended != 0) { 2122 USB_BUS_UNLOCK(bus); 2123 usb_dev_resume_peer(udev); 2124 USB_BUS_LOCK(bus); 2125 } 2126 } else if ((temp >= limit) && 2127 (udev->flags.usb_mode == USB_MODE_HOST) && 2128 (udev->flags.self_suspended == 0)) { 2129 /* try to do suspend */ 2130 2131 USB_BUS_UNLOCK(bus); 2132 usb_dev_suspend_peer(udev); 2133 USB_BUS_LOCK(bus); 2134 } 2135 } 2136 2137 /* reset counters */ 2138 2139 mintime = (usb_ticks_t)-1; 2140 type_refs[0] = 0; 2141 type_refs[1] = 0; 2142 type_refs[2] = 0; 2143 type_refs[3] = 0; 2144 type_refs[4] = 0; 2145 2146 /* Re-loop all the devices to get the actual state */ 2147 2148 for (x = USB_ROOT_HUB_ADDR + 1; 2149 x != bus->devices_max; x++) { 2150 2151 udev = bus->devices[x]; 2152 if (udev == NULL) 2153 continue; 2154 2155 /* we found a non-Root-Hub USB device */ 2156 type_refs[4] += 1; 2157 2158 /* "last_xfer_time" can be updated by a resume */ 2159 temp = ticks - udev->pwr_save.last_xfer_time; 2160 2161 /* 2162 * Compute minimum time since last transfer for the complete 2163 * bus: 2164 */ 2165 if (temp < mintime) 2166 mintime = temp; 2167 2168 if (udev->flags.self_suspended == 0) { 2169 type_refs[0] += udev->pwr_save.type_refs[0]; 2170 type_refs[1] += udev->pwr_save.type_refs[1]; 2171 type_refs[2] += udev->pwr_save.type_refs[2]; 2172 type_refs[3] += udev->pwr_save.type_refs[3]; 2173 } 2174 } 2175 2176 if (mintime >= (usb_ticks_t)(1 * hz)) { 2177 /* recompute power masks */ 2178 DPRINTF("Recomputing power masks\n"); 2179 bus->hw_power_state = 0; 2180 if (type_refs[UE_CONTROL] != 0) 2181 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2182 if (type_refs[UE_BULK] != 0) 2183 bus->hw_power_state |= USB_HW_POWER_BULK; 2184 if (type_refs[UE_INTERRUPT] != 0) 2185 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2186 if (type_refs[UE_ISOCHRONOUS] != 0) 2187 bus->hw_power_state |= USB_HW_POWER_ISOC; 2188 if (type_refs[4] != 0) 2189 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2190 } 2191 USB_BUS_UNLOCK(bus); 2192 2193 if (bus->methods->set_hw_power != NULL) { 2194 /* always update hardware power! */ 2195 (bus->methods->set_hw_power) (bus); 2196 } 2197 return; 2198 } 2199 #endif 2200 2201 /*------------------------------------------------------------------------* 2202 * usb_dev_resume_peer 2203 * 2204 * This function will resume an USB peer and do the required USB 2205 * signalling to get an USB device out of the suspended state. 2206 *------------------------------------------------------------------------*/ 2207 static void 2208 usb_dev_resume_peer(struct usb_device *udev) 2209 { 2210 struct usb_bus *bus; 2211 int err; 2212 2213 /* be NULL safe */ 2214 if (udev == NULL) 2215 return; 2216 2217 /* check if already resumed */ 2218 if (udev->flags.self_suspended == 0) 2219 return; 2220 2221 /* we need a parent HUB to do resume */ 2222 if (udev->parent_hub == NULL) 2223 return; 2224 2225 DPRINTF("udev=%p\n", udev); 2226 2227 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2228 (udev->flags.remote_wakeup == 0)) { 2229 /* 2230 * If the host did not set the remote wakeup feature, we can 2231 * not wake it up either! 2232 */ 2233 DPRINTF("remote wakeup is not set!\n"); 2234 return; 2235 } 2236 /* get bus pointer */ 2237 bus = udev->bus; 2238 2239 /* resume parent hub first */ 2240 usb_dev_resume_peer(udev->parent_hub); 2241 2242 /* reduce chance of instant resume failure by waiting a little bit */ 2243 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2244 2245 if (usb_device_20_compatible(udev)) { 2246 /* resume current port (Valid in Host and Device Mode) */ 2247 err = usbd_req_clear_port_feature(udev->parent_hub, 2248 NULL, udev->port_no, UHF_PORT_SUSPEND); 2249 if (err) { 2250 DPRINTFN(0, "Resuming port failed\n"); 2251 return; 2252 } 2253 } else { 2254 /* resume current port (Valid in Host and Device Mode) */ 2255 err = usbd_req_set_port_link_state(udev->parent_hub, 2256 NULL, udev->port_no, UPS_PORT_LS_U0); 2257 if (err) { 2258 DPRINTFN(0, "Resuming port failed\n"); 2259 return; 2260 } 2261 } 2262 2263 /* resume settle time */ 2264 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2265 2266 if (bus->methods->device_resume != NULL) { 2267 /* resume USB device on the USB controller */ 2268 (bus->methods->device_resume) (udev); 2269 } 2270 USB_BUS_LOCK(bus); 2271 /* set that this device is now resumed */ 2272 udev->flags.self_suspended = 0; 2273 #if USB_HAVE_POWERD 2274 /* make sure that we don't go into suspend right away */ 2275 udev->pwr_save.last_xfer_time = ticks; 2276 2277 /* make sure the needed power masks are on */ 2278 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2279 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2280 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2281 bus->hw_power_state |= USB_HW_POWER_BULK; 2282 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2283 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2284 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2285 bus->hw_power_state |= USB_HW_POWER_ISOC; 2286 #endif 2287 USB_BUS_UNLOCK(bus); 2288 2289 if (bus->methods->set_hw_power != NULL) { 2290 /* always update hardware power! */ 2291 (bus->methods->set_hw_power) (bus); 2292 } 2293 2294 usbd_sr_lock(udev); 2295 2296 /* notify all sub-devices about resume */ 2297 err = usb_suspend_resume(udev, 0); 2298 2299 usbd_sr_unlock(udev); 2300 2301 /* check if peer has wakeup capability */ 2302 if (usb_peer_can_wakeup(udev)) { 2303 /* clear remote wakeup */ 2304 err = usbd_req_clear_device_feature(udev, 2305 NULL, UF_DEVICE_REMOTE_WAKEUP); 2306 if (err) { 2307 DPRINTFN(0, "Clearing device " 2308 "remote wakeup failed: %s\n", 2309 usbd_errstr(err)); 2310 } 2311 } 2312 } 2313 2314 /*------------------------------------------------------------------------* 2315 * usb_dev_suspend_peer 2316 * 2317 * This function will suspend an USB peer and do the required USB 2318 * signalling to get an USB device into the suspended state. 2319 *------------------------------------------------------------------------*/ 2320 static void 2321 usb_dev_suspend_peer(struct usb_device *udev) 2322 { 2323 struct usb_device *child; 2324 int err; 2325 uint8_t x; 2326 uint8_t nports; 2327 2328 repeat: 2329 /* be NULL safe */ 2330 if (udev == NULL) 2331 return; 2332 2333 /* check if already suspended */ 2334 if (udev->flags.self_suspended) 2335 return; 2336 2337 /* we need a parent HUB to do suspend */ 2338 if (udev->parent_hub == NULL) 2339 return; 2340 2341 DPRINTF("udev=%p\n", udev); 2342 2343 /* check if the current device is a HUB */ 2344 if (udev->hub != NULL) { 2345 nports = udev->hub->nports; 2346 2347 /* check if all devices on the HUB are suspended */ 2348 for (x = 0; x != nports; x++) { 2349 child = usb_bus_port_get_device(udev->bus, 2350 udev->hub->ports + x); 2351 2352 if (child == NULL) 2353 continue; 2354 2355 if (child->flags.self_suspended) 2356 continue; 2357 2358 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2359 return; 2360 } 2361 } 2362 2363 if (usb_peer_can_wakeup(udev)) { 2364 /* 2365 * This request needs to be done before we set 2366 * "udev->flags.self_suspended": 2367 */ 2368 2369 /* allow device to do remote wakeup */ 2370 err = usbd_req_set_device_feature(udev, 2371 NULL, UF_DEVICE_REMOTE_WAKEUP); 2372 if (err) { 2373 DPRINTFN(0, "Setting device " 2374 "remote wakeup failed\n"); 2375 } 2376 } 2377 2378 USB_BUS_LOCK(udev->bus); 2379 /* 2380 * Checking for suspend condition and setting suspended bit 2381 * must be atomic! 2382 */ 2383 err = usb_peer_should_wakeup(udev); 2384 if (err == 0) { 2385 /* 2386 * Set that this device is suspended. This variable 2387 * must be set before calling USB controller suspend 2388 * callbacks. 2389 */ 2390 udev->flags.self_suspended = 1; 2391 } 2392 USB_BUS_UNLOCK(udev->bus); 2393 2394 if (err != 0) { 2395 if (usb_peer_can_wakeup(udev)) { 2396 /* allow device to do remote wakeup */ 2397 err = usbd_req_clear_device_feature(udev, 2398 NULL, UF_DEVICE_REMOTE_WAKEUP); 2399 if (err) { 2400 DPRINTFN(0, "Setting device " 2401 "remote wakeup failed\n"); 2402 } 2403 } 2404 2405 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2406 /* resume parent HUB first */ 2407 usb_dev_resume_peer(udev->parent_hub); 2408 2409 /* reduce chance of instant resume failure by waiting a little bit */ 2410 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2411 2412 /* resume current port (Valid in Host and Device Mode) */ 2413 err = usbd_req_clear_port_feature(udev->parent_hub, 2414 NULL, udev->port_no, UHF_PORT_SUSPEND); 2415 2416 /* resume settle time */ 2417 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2418 } 2419 DPRINTF("Suspend was cancelled!\n"); 2420 return; 2421 } 2422 2423 usbd_sr_lock(udev); 2424 2425 /* notify all sub-devices about suspend */ 2426 err = usb_suspend_resume(udev, 1); 2427 2428 usbd_sr_unlock(udev); 2429 2430 if (udev->bus->methods->device_suspend != NULL) { 2431 usb_timeout_t temp; 2432 2433 /* suspend device on the USB controller */ 2434 (udev->bus->methods->device_suspend) (udev); 2435 2436 /* do DMA delay */ 2437 temp = usbd_get_dma_delay(udev); 2438 if (temp != 0) 2439 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2440 2441 } 2442 2443 if (usb_device_20_compatible(udev)) { 2444 /* suspend current port */ 2445 err = usbd_req_set_port_feature(udev->parent_hub, 2446 NULL, udev->port_no, UHF_PORT_SUSPEND); 2447 if (err) { 2448 DPRINTFN(0, "Suspending port failed\n"); 2449 return; 2450 } 2451 } else { 2452 /* suspend current port */ 2453 err = usbd_req_set_port_link_state(udev->parent_hub, 2454 NULL, udev->port_no, UPS_PORT_LS_U3); 2455 if (err) { 2456 DPRINTFN(0, "Suspending port failed\n"); 2457 return; 2458 } 2459 } 2460 2461 udev = udev->parent_hub; 2462 goto repeat; 2463 } 2464 2465 /*------------------------------------------------------------------------* 2466 * usbd_set_power_mode 2467 * 2468 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2469 * USB device. 2470 *------------------------------------------------------------------------*/ 2471 void 2472 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2473 { 2474 /* filter input argument */ 2475 if ((power_mode != USB_POWER_MODE_ON) && 2476 (power_mode != USB_POWER_MODE_OFF)) 2477 power_mode = USB_POWER_MODE_SAVE; 2478 2479 power_mode = usbd_filter_power_mode(udev, power_mode); 2480 2481 udev->power_mode = power_mode; /* update copy of power mode */ 2482 2483 #if USB_HAVE_POWERD 2484 usb_bus_power_update(udev->bus); 2485 #endif 2486 } 2487 2488 /*------------------------------------------------------------------------* 2489 * usbd_filter_power_mode 2490 * 2491 * This function filters the power mode based on hardware requirements. 2492 *------------------------------------------------------------------------*/ 2493 uint8_t 2494 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2495 { 2496 struct usb_bus_methods *mtod; 2497 int8_t temp; 2498 2499 mtod = udev->bus->methods; 2500 temp = -1; 2501 2502 if (mtod->get_power_mode != NULL) 2503 (mtod->get_power_mode) (udev, &temp); 2504 2505 /* check if we should not filter */ 2506 if (temp < 0) 2507 return (power_mode); 2508 2509 /* use fixed power mode given by hardware driver */ 2510 return (temp); 2511 } 2512 2513 /*------------------------------------------------------------------------* 2514 * usbd_start_re_enumerate 2515 * 2516 * This function starts re-enumeration of the given USB device. This 2517 * function does not need to be called BUS-locked. This function does 2518 * not wait until the re-enumeration is completed. 2519 *------------------------------------------------------------------------*/ 2520 void 2521 usbd_start_re_enumerate(struct usb_device *udev) 2522 { 2523 if (udev->re_enumerate_wait == 0) { 2524 udev->re_enumerate_wait = 1; 2525 usb_needs_explore(udev->bus, 0); 2526 } 2527 } 2528