1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5 * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 31 */ 32 33 #include <sys/stdint.h> 34 #include <sys/stddef.h> 35 #include <sys/param.h> 36 #include <sys/queue.h> 37 #include <sys/types.h> 38 #include <sys/systm.h> 39 #include <sys/kernel.h> 40 #include <sys/bus.h> 41 #include <sys/module.h> 42 #include <sys/lock.h> 43 #include <sys/mutex.h> 44 #include <sys/condvar.h> 45 #include <sys/sysctl.h> 46 #include <sys/sx.h> 47 #include <sys/unistd.h> 48 #include <sys/callout.h> 49 #include <sys/malloc.h> 50 #include <sys/priv.h> 51 52 #include <dev/usb/usb.h> 53 #include <dev/usb/usb_ioctl.h> 54 #include <dev/usb/usbdi.h> 55 #include <dev/usb/usbdi_util.h> 56 57 #define USB_DEBUG_VAR uhub_debug 58 59 #include <dev/usb/usb_core.h> 60 #include <dev/usb/usb_process.h> 61 #include <dev/usb/usb_device.h> 62 #include <dev/usb/usb_request.h> 63 #include <dev/usb/usb_debug.h> 64 #include <dev/usb/usb_hub.h> 65 #include <dev/usb/usb_util.h> 66 #include <dev/usb/usb_busdma.h> 67 #include <dev/usb/usb_transfer.h> 68 #include <dev/usb/usb_dynamic.h> 69 70 #include <dev/usb/usb_controller.h> 71 #include <dev/usb/usb_bus.h> 72 73 #define UHUB_INTR_INTERVAL 250 /* ms */ 74 #define UHUB_N_TRANSFER 1 75 76 #ifdef USB_DEBUG 77 static int uhub_debug = 0; 78 79 static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB"); 80 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RW, &uhub_debug, 0, 81 "Debug level"); 82 83 TUNABLE_INT("hw.usb.uhub.debug", &uhub_debug); 84 #endif 85 86 #if USB_HAVE_POWERD 87 static int usb_power_timeout = 30; /* seconds */ 88 89 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RW, 90 &usb_power_timeout, 0, "USB power timeout"); 91 #endif 92 93 struct uhub_current_state { 94 uint16_t port_change; 95 uint16_t port_status; 96 }; 97 98 struct uhub_softc { 99 struct uhub_current_state sc_st;/* current state */ 100 device_t sc_dev; /* base device */ 101 struct mtx sc_mtx; /* our mutex */ 102 struct usb_device *sc_udev; /* USB device */ 103 struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */ 104 uint8_t sc_flags; 105 #define UHUB_FLAG_DID_EXPLORE 0x01 106 char sc_name[32]; 107 }; 108 109 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 110 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 111 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 112 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 113 114 /* prototypes for type checking: */ 115 116 static device_probe_t uhub_probe; 117 static device_attach_t uhub_attach; 118 static device_detach_t uhub_detach; 119 static device_suspend_t uhub_suspend; 120 static device_resume_t uhub_resume; 121 122 static bus_driver_added_t uhub_driver_added; 123 static bus_child_location_str_t uhub_child_location_string; 124 static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string; 125 126 static usb_callback_t uhub_intr_callback; 127 128 static void usb_dev_resume_peer(struct usb_device *udev); 129 static void usb_dev_suspend_peer(struct usb_device *udev); 130 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 131 132 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 133 134 [0] = { 135 .type = UE_INTERRUPT, 136 .endpoint = UE_ADDR_ANY, 137 .direction = UE_DIR_ANY, 138 .timeout = 0, 139 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 140 .bufsize = 0, /* use wMaxPacketSize */ 141 .callback = &uhub_intr_callback, 142 .interval = UHUB_INTR_INTERVAL, 143 }, 144 }; 145 146 /* 147 * driver instance for "hub" connected to "usb" 148 * and "hub" connected to "hub" 149 */ 150 static devclass_t uhub_devclass; 151 152 static device_method_t uhub_methods[] = { 153 DEVMETHOD(device_probe, uhub_probe), 154 DEVMETHOD(device_attach, uhub_attach), 155 DEVMETHOD(device_detach, uhub_detach), 156 157 DEVMETHOD(device_suspend, uhub_suspend), 158 DEVMETHOD(device_resume, uhub_resume), 159 160 DEVMETHOD(bus_child_location_str, uhub_child_location_string), 161 DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string), 162 DEVMETHOD(bus_driver_added, uhub_driver_added), 163 {0, 0} 164 }; 165 166 static driver_t uhub_driver = { 167 .name = "uhub", 168 .methods = uhub_methods, 169 .size = sizeof(struct uhub_softc) 170 }; 171 172 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); 173 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); 174 MODULE_VERSION(uhub, 1); 175 176 static void 177 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 178 { 179 struct uhub_softc *sc = usbd_xfer_softc(xfer); 180 181 switch (USB_GET_STATE(xfer)) { 182 case USB_ST_TRANSFERRED: 183 DPRINTFN(2, "\n"); 184 /* 185 * This is an indication that some port 186 * has changed status. Notify the bus 187 * event handler thread that we need 188 * to be explored again: 189 */ 190 usb_needs_explore(sc->sc_udev->bus, 0); 191 192 case USB_ST_SETUP: 193 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 194 usbd_transfer_submit(xfer); 195 break; 196 197 default: /* Error */ 198 if (xfer->error != USB_ERR_CANCELLED) { 199 /* 200 * Do a clear-stall. The "stall_pipe" flag 201 * will get cleared before next callback by 202 * the USB stack. 203 */ 204 usbd_xfer_set_stall(xfer); 205 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 206 usbd_transfer_submit(xfer); 207 } 208 break; 209 } 210 } 211 212 /*------------------------------------------------------------------------* 213 * uhub_explore_sub - subroutine 214 * 215 * Return values: 216 * 0: Success 217 * Else: A control transaction failed 218 *------------------------------------------------------------------------*/ 219 static usb_error_t 220 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 221 { 222 struct usb_bus *bus; 223 struct usb_device *child; 224 uint8_t refcount; 225 usb_error_t err; 226 227 bus = sc->sc_udev->bus; 228 err = 0; 229 230 /* get driver added refcount from USB bus */ 231 refcount = bus->driver_added_refcount; 232 233 /* get device assosiated with the given port */ 234 child = usb_bus_port_get_device(bus, up); 235 if (child == NULL) { 236 /* nothing to do */ 237 goto done; 238 } 239 240 /* check if device should be re-enumerated */ 241 242 if (child->flags.usb_mode == USB_MODE_HOST) { 243 usbd_enum_lock(child); 244 if (child->re_enumerate_wait) { 245 err = usbd_set_config_index(child, 246 USB_UNCONFIG_INDEX); 247 if (err != 0) { 248 DPRINTF("Unconfigure failed: " 249 "%s: Ignored.\n", 250 usbd_errstr(err)); 251 } 252 err = usbd_req_re_enumerate(child, NULL); 253 if (err == 0) 254 err = usbd_set_config_index(child, 0); 255 if (err == 0) { 256 err = usb_probe_and_attach(child, 257 USB_IFACE_INDEX_ANY); 258 } 259 child->re_enumerate_wait = 0; 260 err = 0; 261 } 262 usbd_enum_unlock(child); 263 } 264 265 /* check if probe and attach should be done */ 266 267 if (child->driver_added_refcount != refcount) { 268 child->driver_added_refcount = refcount; 269 err = usb_probe_and_attach(child, 270 USB_IFACE_INDEX_ANY); 271 if (err) { 272 goto done; 273 } 274 } 275 /* start control transfer, if device mode */ 276 277 if (child->flags.usb_mode == USB_MODE_DEVICE) 278 usbd_ctrl_transfer_setup(child); 279 280 /* if a HUB becomes present, do a recursive HUB explore */ 281 282 if (child->hub) 283 err = (child->hub->explore) (child); 284 285 done: 286 return (err); 287 } 288 289 /*------------------------------------------------------------------------* 290 * uhub_read_port_status - factored out code 291 *------------------------------------------------------------------------*/ 292 static usb_error_t 293 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 294 { 295 struct usb_port_status ps; 296 usb_error_t err; 297 298 err = usbd_req_get_port_status( 299 sc->sc_udev, NULL, &ps, portno); 300 301 /* update status regardless of error */ 302 303 sc->sc_st.port_status = UGETW(ps.wPortStatus); 304 sc->sc_st.port_change = UGETW(ps.wPortChange); 305 306 /* debugging print */ 307 308 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 309 "wPortChange=0x%04x, err=%s\n", 310 portno, sc->sc_st.port_status, 311 sc->sc_st.port_change, usbd_errstr(err)); 312 return (err); 313 } 314 315 /*------------------------------------------------------------------------* 316 * uhub_reattach_port 317 * 318 * Returns: 319 * 0: Success 320 * Else: A control transaction failed 321 *------------------------------------------------------------------------*/ 322 static usb_error_t 323 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 324 { 325 struct usb_device *child; 326 struct usb_device *udev; 327 enum usb_dev_speed speed; 328 enum usb_hc_mode mode; 329 usb_error_t err; 330 uint16_t power_mask; 331 uint8_t timeout; 332 333 DPRINTF("reattaching port %d\n", portno); 334 335 err = 0; 336 timeout = 0; 337 udev = sc->sc_udev; 338 child = usb_bus_port_get_device(udev->bus, 339 udev->hub->ports + portno - 1); 340 341 repeat: 342 343 /* first clear the port connection change bit */ 344 345 err = usbd_req_clear_port_feature(udev, NULL, 346 portno, UHF_C_PORT_CONNECTION); 347 348 if (err) { 349 goto error; 350 } 351 /* check if there is a child */ 352 353 if (child != NULL) { 354 /* 355 * Free USB device and all subdevices, if any. 356 */ 357 usb_free_device(child, 0); 358 child = NULL; 359 } 360 /* get fresh status */ 361 362 err = uhub_read_port_status(sc, portno); 363 if (err) { 364 goto error; 365 } 366 /* check if nothing is connected to the port */ 367 368 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) { 369 goto error; 370 } 371 /* check if there is no power on the port and print a warning */ 372 373 switch (udev->speed) { 374 case USB_SPEED_HIGH: 375 case USB_SPEED_FULL: 376 case USB_SPEED_LOW: 377 power_mask = UPS_PORT_POWER; 378 break; 379 case USB_SPEED_SUPER: 380 if (udev->parent_hub == NULL) 381 power_mask = UPS_PORT_POWER; 382 else 383 power_mask = UPS_PORT_POWER_SS; 384 break; 385 default: 386 power_mask = 0; 387 break; 388 } 389 if (!(sc->sc_st.port_status & power_mask)) { 390 DPRINTF("WARNING: strange, connected port %d " 391 "has no power\n", portno); 392 } 393 394 /* check if the device is in Host Mode */ 395 396 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 397 398 DPRINTF("Port %d is in Host Mode\n", portno); 399 400 if (sc->sc_st.port_status & UPS_SUSPEND) { 401 /* 402 * NOTE: Should not get here in SuperSpeed 403 * mode, because the HUB should report this 404 * bit as zero. 405 */ 406 DPRINTF("Port %d was still " 407 "suspended, clearing.\n", portno); 408 err = usbd_req_clear_port_feature(udev, 409 NULL, portno, UHF_PORT_SUSPEND); 410 } 411 412 /* USB Host Mode */ 413 414 /* wait for maximum device power up time */ 415 416 usb_pause_mtx(NULL, 417 USB_MS_TO_TICKS(USB_PORT_POWERUP_DELAY)); 418 419 /* reset port, which implies enabling it */ 420 421 err = usbd_req_reset_port(udev, NULL, portno); 422 423 if (err) { 424 DPRINTFN(0, "port %d reset " 425 "failed, error=%s\n", 426 portno, usbd_errstr(err)); 427 goto error; 428 } 429 /* get port status again, it might have changed during reset */ 430 431 err = uhub_read_port_status(sc, portno); 432 if (err) { 433 goto error; 434 } 435 /* check if something changed during port reset */ 436 437 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 438 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 439 if (timeout) { 440 DPRINTFN(0, "giving up port reset " 441 "- device vanished\n"); 442 goto error; 443 } 444 timeout = 1; 445 goto repeat; 446 } 447 } else { 448 DPRINTF("Port %d is in Device Mode\n", portno); 449 } 450 451 /* 452 * Figure out the device speed 453 */ 454 switch (udev->speed) { 455 case USB_SPEED_HIGH: 456 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 457 speed = USB_SPEED_HIGH; 458 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 459 speed = USB_SPEED_LOW; 460 else 461 speed = USB_SPEED_FULL; 462 break; 463 case USB_SPEED_FULL: 464 if (sc->sc_st.port_status & UPS_LOW_SPEED) 465 speed = USB_SPEED_LOW; 466 else 467 speed = USB_SPEED_FULL; 468 break; 469 case USB_SPEED_LOW: 470 speed = USB_SPEED_LOW; 471 break; 472 case USB_SPEED_SUPER: 473 if (udev->parent_hub == NULL) { 474 /* Root HUB - special case */ 475 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 476 case 0: 477 speed = USB_SPEED_FULL; 478 break; 479 case UPS_LOW_SPEED: 480 speed = USB_SPEED_LOW; 481 break; 482 case UPS_HIGH_SPEED: 483 speed = USB_SPEED_HIGH; 484 break; 485 default: 486 speed = USB_SPEED_SUPER; 487 break; 488 } 489 } else { 490 speed = USB_SPEED_SUPER; 491 } 492 break; 493 default: 494 /* same speed like parent */ 495 speed = udev->speed; 496 break; 497 } 498 if (speed == USB_SPEED_SUPER) { 499 err = usbd_req_set_hub_u1_timeout(udev, NULL, 500 portno, 128 - (2 * udev->depth)); 501 if (err) { 502 DPRINTFN(0, "port %d U1 timeout " 503 "failed, error=%s\n", 504 portno, usbd_errstr(err)); 505 } 506 err = usbd_req_set_hub_u2_timeout(udev, NULL, 507 portno, 128 - (2 * udev->depth)); 508 if (err) { 509 DPRINTFN(0, "port %d U2 timeout " 510 "failed, error=%s\n", 511 portno, usbd_errstr(err)); 512 } 513 } 514 515 /* 516 * Figure out the device mode 517 * 518 * NOTE: This part is currently FreeBSD specific. 519 */ 520 if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 521 mode = USB_MODE_DEVICE; 522 else 523 mode = USB_MODE_HOST; 524 525 /* need to create a new child */ 526 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 527 udev->depth + 1, portno - 1, portno, speed, mode); 528 if (child == NULL) { 529 DPRINTFN(0, "could not allocate new device\n"); 530 goto error; 531 } 532 return (0); /* success */ 533 534 error: 535 if (child != NULL) { 536 /* 537 * Free USB device and all subdevices, if any. 538 */ 539 usb_free_device(child, 0); 540 child = NULL; 541 } 542 if (err == 0) { 543 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 544 err = usbd_req_clear_port_feature( 545 sc->sc_udev, NULL, 546 portno, UHF_PORT_ENABLE); 547 } 548 } 549 if (err) { 550 DPRINTFN(0, "device problem (%s), " 551 "disabling port %d\n", usbd_errstr(err), portno); 552 } 553 return (err); 554 } 555 556 /*------------------------------------------------------------------------* 557 * usb_device_20_compatible 558 * 559 * Returns: 560 * 0: HUB does not support suspend and resume 561 * Else: HUB supports suspend and resume 562 *------------------------------------------------------------------------*/ 563 static uint8_t 564 usb_device_20_compatible(struct usb_device *udev) 565 { 566 if (udev == NULL) 567 return (0); 568 switch (udev->speed) { 569 case USB_SPEED_LOW: 570 case USB_SPEED_FULL: 571 case USB_SPEED_HIGH: 572 return (1); 573 default: 574 return (0); 575 } 576 } 577 578 /*------------------------------------------------------------------------* 579 * uhub_suspend_resume_port 580 * 581 * Returns: 582 * 0: Success 583 * Else: A control transaction failed 584 *------------------------------------------------------------------------*/ 585 static usb_error_t 586 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 587 { 588 struct usb_device *child; 589 struct usb_device *udev; 590 uint8_t is_suspend; 591 usb_error_t err; 592 593 DPRINTF("port %d\n", portno); 594 595 udev = sc->sc_udev; 596 child = usb_bus_port_get_device(udev->bus, 597 udev->hub->ports + portno - 1); 598 599 /* first clear the port suspend change bit */ 600 601 if (usb_device_20_compatible(udev)) { 602 err = usbd_req_clear_port_feature(udev, NULL, 603 portno, UHF_C_PORT_SUSPEND); 604 } else { 605 err = usbd_req_clear_port_feature(udev, NULL, 606 portno, UHF_C_PORT_LINK_STATE); 607 } 608 609 if (err) { 610 DPRINTF("clearing suspend failed.\n"); 611 goto done; 612 } 613 /* get fresh status */ 614 615 err = uhub_read_port_status(sc, portno); 616 if (err) { 617 DPRINTF("reading port status failed.\n"); 618 goto done; 619 } 620 /* convert current state */ 621 622 if (usb_device_20_compatible(udev)) { 623 if (sc->sc_st.port_status & UPS_SUSPEND) { 624 is_suspend = 1; 625 } else { 626 is_suspend = 0; 627 } 628 } else { 629 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 630 case UPS_PORT_LS_U3: 631 is_suspend = 1; 632 break; 633 case UPS_PORT_LS_SS_INA: 634 usbd_req_warm_reset_port(udev, NULL, portno); 635 is_suspend = 0; 636 break; 637 default: 638 is_suspend = 0; 639 break; 640 } 641 } 642 643 DPRINTF("suspended=%u\n", is_suspend); 644 645 /* do the suspend or resume */ 646 647 if (child) { 648 /* 649 * This code handle two cases: 1) Host Mode - we can only 650 * receive resume here 2) Device Mode - we can receive 651 * suspend and resume here 652 */ 653 if (is_suspend == 0) 654 usb_dev_resume_peer(child); 655 else if (child->flags.usb_mode == USB_MODE_DEVICE) 656 usb_dev_suspend_peer(child); 657 } 658 done: 659 return (err); 660 } 661 662 /*------------------------------------------------------------------------* 663 * uhub_root_interrupt 664 * 665 * This function is called when a Root HUB interrupt has 666 * happened. "ptr" and "len" makes up the Root HUB interrupt 667 * packet. This function is called having the "bus_mtx" locked. 668 *------------------------------------------------------------------------*/ 669 void 670 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) 671 { 672 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 673 674 usb_needs_explore(bus, 0); 675 } 676 677 static uint8_t 678 uhub_is_too_deep(struct usb_device *udev) 679 { 680 switch (udev->speed) { 681 case USB_SPEED_FULL: 682 case USB_SPEED_LOW: 683 case USB_SPEED_HIGH: 684 if (udev->depth > USB_HUB_MAX_DEPTH) 685 return (1); 686 break; 687 case USB_SPEED_SUPER: 688 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 689 return (1); 690 break; 691 default: 692 break; 693 } 694 return (0); 695 } 696 697 /*------------------------------------------------------------------------* 698 * uhub_explore 699 * 700 * Returns: 701 * 0: Success 702 * Else: Failure 703 *------------------------------------------------------------------------*/ 704 static usb_error_t 705 uhub_explore(struct usb_device *udev) 706 { 707 struct usb_hub *hub; 708 struct uhub_softc *sc; 709 struct usb_port *up; 710 usb_error_t err; 711 uint8_t portno; 712 uint8_t x; 713 714 hub = udev->hub; 715 sc = hub->hubsoftc; 716 717 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 718 719 /* ignore devices that are too deep */ 720 if (uhub_is_too_deep(udev)) 721 return (USB_ERR_TOO_DEEP); 722 723 /* check if device is suspended */ 724 if (udev->flags.self_suspended) { 725 /* need to wait until the child signals resume */ 726 DPRINTF("Device is suspended!\n"); 727 return (0); 728 } 729 730 /* 731 * Make sure we don't race against user-space applications 732 * like LibUSB: 733 */ 734 usbd_enum_lock(udev); 735 736 for (x = 0; x != hub->nports; x++) { 737 up = hub->ports + x; 738 portno = x + 1; 739 740 err = uhub_read_port_status(sc, portno); 741 if (err) { 742 /* most likely the HUB is gone */ 743 break; 744 } 745 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 746 DPRINTF("Overcurrent on port %u.\n", portno); 747 err = usbd_req_clear_port_feature( 748 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 749 if (err) { 750 /* most likely the HUB is gone */ 751 break; 752 } 753 } 754 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 755 /* 756 * Fake a connect status change so that the 757 * status gets checked initially! 758 */ 759 sc->sc_st.port_change |= 760 UPS_C_CONNECT_STATUS; 761 } 762 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 763 err = usbd_req_clear_port_feature( 764 udev, NULL, portno, UHF_C_PORT_ENABLE); 765 if (err) { 766 /* most likely the HUB is gone */ 767 break; 768 } 769 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 770 /* 771 * Ignore the port error if the device 772 * has vanished ! 773 */ 774 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 775 DPRINTFN(0, "illegal enable change, " 776 "port %d\n", portno); 777 } else { 778 779 if (up->restartcnt == USB_RESTART_MAX) { 780 /* XXX could try another speed ? */ 781 DPRINTFN(0, "port error, giving up " 782 "port %d\n", portno); 783 } else { 784 sc->sc_st.port_change |= 785 UPS_C_CONNECT_STATUS; 786 up->restartcnt++; 787 } 788 } 789 } 790 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 791 err = uhub_reattach_port(sc, portno); 792 if (err) { 793 /* most likely the HUB is gone */ 794 break; 795 } 796 } 797 if (sc->sc_st.port_change & (UPS_C_SUSPEND | 798 UPS_C_PORT_LINK_STATE)) { 799 err = uhub_suspend_resume_port(sc, portno); 800 if (err) { 801 /* most likely the HUB is gone */ 802 break; 803 } 804 } 805 err = uhub_explore_sub(sc, up); 806 if (err) { 807 /* no device(s) present */ 808 continue; 809 } 810 /* explore succeeded - reset restart counter */ 811 up->restartcnt = 0; 812 } 813 814 usbd_enum_unlock(udev); 815 816 /* initial status checked */ 817 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 818 819 /* return success */ 820 return (USB_ERR_NORMAL_COMPLETION); 821 } 822 823 static int 824 uhub_probe(device_t dev) 825 { 826 struct usb_attach_arg *uaa = device_get_ivars(dev); 827 828 if (uaa->usb_mode != USB_MODE_HOST) 829 return (ENXIO); 830 831 /* 832 * The subclass for USB HUBs is currently ignored because it 833 * is 0 for some and 1 for others. 834 */ 835 if (uaa->info.bConfigIndex == 0 && 836 uaa->info.bDeviceClass == UDCLASS_HUB) 837 return (0); 838 839 return (ENXIO); 840 } 841 842 /* NOTE: The information returned by this function can be wrong. */ 843 usb_error_t 844 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 845 { 846 struct usb_hub_descriptor hubdesc20; 847 struct usb_hub_ss_descriptor hubdesc30; 848 usb_error_t err; 849 uint8_t nports; 850 uint8_t tt; 851 852 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 853 return (USB_ERR_INVAL); 854 855 nports = 0; 856 tt = 0; 857 858 switch (udev->speed) { 859 case USB_SPEED_LOW: 860 case USB_SPEED_FULL: 861 case USB_SPEED_HIGH: 862 /* assuming that there is one port */ 863 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 864 if (err) { 865 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 866 "error=%s\n", usbd_errstr(err)); 867 break; 868 } 869 nports = hubdesc20.bNbrPorts; 870 if (nports > 127) 871 nports = 127; 872 873 if (udev->speed == USB_SPEED_HIGH) 874 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 875 break; 876 877 case USB_SPEED_SUPER: 878 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 879 if (err) { 880 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 881 "error=%s\n", usbd_errstr(err)); 882 break; 883 } 884 nports = hubdesc30.bNbrPorts; 885 if (nports > 16) 886 nports = 16; 887 break; 888 889 default: 890 err = USB_ERR_INVAL; 891 break; 892 } 893 894 if (pnports != NULL) 895 *pnports = nports; 896 897 if (ptt != NULL) 898 *ptt = tt; 899 900 return (err); 901 } 902 903 static int 904 uhub_attach(device_t dev) 905 { 906 struct uhub_softc *sc = device_get_softc(dev); 907 struct usb_attach_arg *uaa = device_get_ivars(dev); 908 struct usb_device *udev = uaa->device; 909 struct usb_device *parent_hub = udev->parent_hub; 910 struct usb_hub *hub; 911 struct usb_hub_descriptor hubdesc20; 912 struct usb_hub_ss_descriptor hubdesc30; 913 uint16_t pwrdly; 914 uint8_t x; 915 uint8_t nports; 916 uint8_t portno; 917 uint8_t removable; 918 uint8_t iface_index; 919 usb_error_t err; 920 921 sc->sc_udev = udev; 922 sc->sc_dev = dev; 923 924 mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); 925 926 snprintf(sc->sc_name, sizeof(sc->sc_name), "%s", 927 device_get_nameunit(dev)); 928 929 device_set_usb_desc(dev); 930 931 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 932 "parent->selfpowered=%d\n", 933 udev->depth, 934 udev->flags.self_powered, 935 parent_hub, 936 parent_hub ? 937 parent_hub->flags.self_powered : 0); 938 939 if (uhub_is_too_deep(udev)) { 940 DPRINTFN(0, "HUB at depth %d, " 941 "exceeds maximum. HUB ignored\n", (int)udev->depth); 942 goto error; 943 } 944 945 if (!udev->flags.self_powered && parent_hub && 946 !parent_hub->flags.self_powered) { 947 DPRINTFN(0, "Bus powered HUB connected to " 948 "bus powered HUB. HUB ignored\n"); 949 goto error; 950 } 951 /* get HUB descriptor */ 952 953 DPRINTFN(2, "Getting HUB descriptor\n"); 954 955 switch (udev->speed) { 956 case USB_SPEED_LOW: 957 case USB_SPEED_FULL: 958 case USB_SPEED_HIGH: 959 /* assuming that there is one port */ 960 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 961 if (err) { 962 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 963 "error=%s\n", usbd_errstr(err)); 964 goto error; 965 } 966 /* get number of ports */ 967 nports = hubdesc20.bNbrPorts; 968 969 /* get power delay */ 970 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 971 USB_EXTRA_POWER_UP_TIME); 972 973 /* get complete HUB descriptor */ 974 if (nports >= 8) { 975 /* check number of ports */ 976 if (nports > 127) { 977 DPRINTFN(0, "Invalid number of USB 2.0 ports," 978 "error=%s\n", usbd_errstr(err)); 979 goto error; 980 } 981 /* get complete HUB descriptor */ 982 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 983 984 if (err) { 985 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 986 "error=%s\n", usbd_errstr(err)); 987 goto error; 988 } 989 if (hubdesc20.bNbrPorts != nports) { 990 DPRINTFN(0, "Number of ports changed\n"); 991 goto error; 992 } 993 } 994 break; 995 case USB_SPEED_SUPER: 996 if (udev->parent_hub != NULL) { 997 err = usbd_req_set_hub_depth(udev, NULL, 998 udev->depth - 1); 999 if (err) { 1000 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 1001 "error=%s\n", usbd_errstr(err)); 1002 goto error; 1003 } 1004 } 1005 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1006 if (err) { 1007 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1008 "error=%s\n", usbd_errstr(err)); 1009 goto error; 1010 } 1011 /* get number of ports */ 1012 nports = hubdesc30.bNbrPorts; 1013 1014 /* get power delay */ 1015 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1016 USB_EXTRA_POWER_UP_TIME); 1017 1018 /* get complete HUB descriptor */ 1019 if (nports >= 8) { 1020 /* check number of ports */ 1021 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 1022 DPRINTFN(0, "Invalid number of USB 3.0 ports," 1023 "error=%s\n", usbd_errstr(err)); 1024 goto error; 1025 } 1026 /* get complete HUB descriptor */ 1027 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 1028 1029 if (err) { 1030 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1031 "error=%s\n", usbd_errstr(err)); 1032 goto error; 1033 } 1034 if (hubdesc30.bNbrPorts != nports) { 1035 DPRINTFN(0, "Number of ports changed\n"); 1036 goto error; 1037 } 1038 } 1039 break; 1040 default: 1041 DPRINTF("Assuming HUB has only one port\n"); 1042 /* default number of ports */ 1043 nports = 1; 1044 /* default power delay */ 1045 pwrdly = ((10 * UHD_PWRON_FACTOR) + USB_EXTRA_POWER_UP_TIME); 1046 break; 1047 } 1048 if (nports == 0) { 1049 DPRINTFN(0, "portless HUB\n"); 1050 goto error; 1051 } 1052 hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1053 M_USBDEV, M_WAITOK | M_ZERO); 1054 1055 if (hub == NULL) { 1056 goto error; 1057 } 1058 udev->hub = hub; 1059 1060 #if USB_HAVE_TT_SUPPORT 1061 /* init FULL-speed ISOCHRONOUS schedule */ 1062 usbd_fs_isoc_schedule_init_all(hub->fs_isoc_schedule); 1063 #endif 1064 /* initialize HUB structure */ 1065 hub->hubsoftc = sc; 1066 hub->explore = &uhub_explore; 1067 hub->nports = nports; 1068 hub->hubudev = udev; 1069 1070 /* if self powered hub, give ports maximum current */ 1071 if (udev->flags.self_powered) { 1072 hub->portpower = USB_MAX_POWER; 1073 } else { 1074 hub->portpower = USB_MIN_POWER; 1075 } 1076 1077 /* set up interrupt pipe */ 1078 iface_index = 0; 1079 if (udev->parent_hub == NULL) { 1080 /* root HUB is special */ 1081 err = 0; 1082 } else { 1083 /* normal HUB */ 1084 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1085 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); 1086 } 1087 if (err) { 1088 DPRINTFN(0, "cannot setup interrupt transfer, " 1089 "errstr=%s\n", usbd_errstr(err)); 1090 goto error; 1091 } 1092 /* wait with power off for a while */ 1093 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1094 1095 /* 1096 * To have the best chance of success we do things in the exact same 1097 * order as Windoze98. This should not be necessary, but some 1098 * devices do not follow the USB specs to the letter. 1099 * 1100 * These are the events on the bus when a hub is attached: 1101 * Get device and config descriptors (see attach code) 1102 * Get hub descriptor (see above) 1103 * For all ports 1104 * turn on power 1105 * wait for power to become stable 1106 * (all below happens in explore code) 1107 * For all ports 1108 * clear C_PORT_CONNECTION 1109 * For all ports 1110 * get port status 1111 * if device connected 1112 * wait 100 ms 1113 * turn on reset 1114 * wait 1115 * clear C_PORT_RESET 1116 * get port status 1117 * proceed with device attachment 1118 */ 1119 1120 /* XXX should check for none, individual, or ganged power? */ 1121 1122 removable = 0; 1123 1124 for (x = 0; x != nports; x++) { 1125 /* set up data structures */ 1126 struct usb_port *up = hub->ports + x; 1127 1128 up->device_index = 0; 1129 up->restartcnt = 0; 1130 portno = x + 1; 1131 1132 /* check if port is removable */ 1133 switch (udev->speed) { 1134 case USB_SPEED_LOW: 1135 case USB_SPEED_FULL: 1136 case USB_SPEED_HIGH: 1137 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1138 removable++; 1139 break; 1140 case USB_SPEED_SUPER: 1141 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1142 removable++; 1143 break; 1144 default: 1145 DPRINTF("Assuming removable port\n"); 1146 removable++; 1147 break; 1148 } 1149 if (!err) { 1150 /* turn the power on */ 1151 err = usbd_req_set_port_feature(udev, NULL, 1152 portno, UHF_PORT_POWER); 1153 } 1154 if (err) { 1155 DPRINTFN(0, "port %d power on failed, %s\n", 1156 portno, usbd_errstr(err)); 1157 } 1158 DPRINTF("turn on port %d power\n", 1159 portno); 1160 1161 /* wait for stable power */ 1162 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1163 } 1164 1165 device_printf(dev, "%d port%s with %d " 1166 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1167 removable, udev->flags.self_powered ? "self" : "bus"); 1168 1169 /* Start the interrupt endpoint, if any */ 1170 1171 if (sc->sc_xfer[0] != NULL) { 1172 mtx_lock(&sc->sc_mtx); 1173 usbd_transfer_start(sc->sc_xfer[0]); 1174 mtx_unlock(&sc->sc_mtx); 1175 } 1176 1177 /* Enable automatic power save on all USB HUBs */ 1178 1179 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1180 1181 return (0); 1182 1183 error: 1184 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1185 1186 if (udev->hub) { 1187 free(udev->hub, M_USBDEV); 1188 udev->hub = NULL; 1189 } 1190 1191 mtx_destroy(&sc->sc_mtx); 1192 1193 return (ENXIO); 1194 } 1195 1196 /* 1197 * Called from process context when the hub is gone. 1198 * Detach all devices on active ports. 1199 */ 1200 static int 1201 uhub_detach(device_t dev) 1202 { 1203 struct uhub_softc *sc = device_get_softc(dev); 1204 struct usb_hub *hub = sc->sc_udev->hub; 1205 struct usb_device *child; 1206 uint8_t x; 1207 1208 if (hub == NULL) /* must be partially working */ 1209 return (0); 1210 1211 /* Make sure interrupt transfer is gone. */ 1212 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1213 1214 /* Detach all ports */ 1215 for (x = 0; x != hub->nports; x++) { 1216 1217 child = usb_bus_port_get_device(sc->sc_udev->bus, hub->ports + x); 1218 1219 if (child == NULL) { 1220 continue; 1221 } 1222 1223 /* 1224 * Free USB device and all subdevices, if any. 1225 */ 1226 usb_free_device(child, 0); 1227 } 1228 1229 free(hub, M_USBDEV); 1230 sc->sc_udev->hub = NULL; 1231 1232 mtx_destroy(&sc->sc_mtx); 1233 1234 return (0); 1235 } 1236 1237 static int 1238 uhub_suspend(device_t dev) 1239 { 1240 DPRINTF("\n"); 1241 /* Sub-devices are not suspended here! */ 1242 return (0); 1243 } 1244 1245 static int 1246 uhub_resume(device_t dev) 1247 { 1248 DPRINTF("\n"); 1249 /* Sub-devices are not resumed here! */ 1250 return (0); 1251 } 1252 1253 static void 1254 uhub_driver_added(device_t dev, driver_t *driver) 1255 { 1256 usb_needs_explore_all(); 1257 } 1258 1259 struct hub_result { 1260 struct usb_device *udev; 1261 uint8_t portno; 1262 uint8_t iface_index; 1263 }; 1264 1265 static void 1266 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1267 struct hub_result *res) 1268 { 1269 struct usb_interface *iface; 1270 struct usb_device *udev; 1271 uint8_t nports; 1272 uint8_t x; 1273 uint8_t i; 1274 1275 nports = hub->nports; 1276 for (x = 0; x != nports; x++) { 1277 udev = usb_bus_port_get_device(hub->hubudev->bus, 1278 hub->ports + x); 1279 if (!udev) { 1280 continue; 1281 } 1282 for (i = 0; i != USB_IFACE_MAX; i++) { 1283 iface = usbd_get_iface(udev, i); 1284 if (iface && 1285 (iface->subdev == child)) { 1286 res->iface_index = i; 1287 res->udev = udev; 1288 res->portno = x + 1; 1289 return; 1290 } 1291 } 1292 } 1293 res->iface_index = 0; 1294 res->udev = NULL; 1295 res->portno = 0; 1296 } 1297 1298 static int 1299 uhub_child_location_string(device_t parent, device_t child, 1300 char *buf, size_t buflen) 1301 { 1302 struct uhub_softc *sc; 1303 struct usb_hub *hub; 1304 struct hub_result res; 1305 1306 if (!device_is_attached(parent)) { 1307 if (buflen) 1308 buf[0] = 0; 1309 return (0); 1310 } 1311 1312 sc = device_get_softc(parent); 1313 hub = sc->sc_udev->hub; 1314 1315 mtx_lock(&Giant); 1316 uhub_find_iface_index(hub, child, &res); 1317 if (!res.udev) { 1318 DPRINTF("device not on hub\n"); 1319 if (buflen) { 1320 buf[0] = '\0'; 1321 } 1322 goto done; 1323 } 1324 snprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u interface=%u", 1325 (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0, 1326 res.portno, device_get_unit(res.udev->bus->bdev), 1327 res.udev->device_index, res.iface_index); 1328 done: 1329 mtx_unlock(&Giant); 1330 1331 return (0); 1332 } 1333 1334 static int 1335 uhub_child_pnpinfo_string(device_t parent, device_t child, 1336 char *buf, size_t buflen) 1337 { 1338 struct uhub_softc *sc; 1339 struct usb_hub *hub; 1340 struct usb_interface *iface; 1341 struct hub_result res; 1342 1343 if (!device_is_attached(parent)) { 1344 if (buflen) 1345 buf[0] = 0; 1346 return (0); 1347 } 1348 1349 sc = device_get_softc(parent); 1350 hub = sc->sc_udev->hub; 1351 1352 mtx_lock(&Giant); 1353 uhub_find_iface_index(hub, child, &res); 1354 if (!res.udev) { 1355 DPRINTF("device not on hub\n"); 1356 if (buflen) { 1357 buf[0] = '\0'; 1358 } 1359 goto done; 1360 } 1361 iface = usbd_get_iface(res.udev, res.iface_index); 1362 if (iface && iface->idesc) { 1363 snprintf(buf, buflen, "vendor=0x%04x product=0x%04x " 1364 "devclass=0x%02x devsubclass=0x%02x " 1365 "sernum=\"%s\" " 1366 "release=0x%04x " 1367 "mode=%s " 1368 "intclass=0x%02x intsubclass=0x%02x " 1369 "intprotocol=0x%02x " "%s%s", 1370 UGETW(res.udev->ddesc.idVendor), 1371 UGETW(res.udev->ddesc.idProduct), 1372 res.udev->ddesc.bDeviceClass, 1373 res.udev->ddesc.bDeviceSubClass, 1374 usb_get_serial(res.udev), 1375 UGETW(res.udev->ddesc.bcdDevice), 1376 (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 1377 iface->idesc->bInterfaceClass, 1378 iface->idesc->bInterfaceSubClass, 1379 iface->idesc->bInterfaceProtocol, 1380 iface->pnpinfo ? " " : "", 1381 iface->pnpinfo ? iface->pnpinfo : ""); 1382 } else { 1383 if (buflen) { 1384 buf[0] = '\0'; 1385 } 1386 goto done; 1387 } 1388 done: 1389 mtx_unlock(&Giant); 1390 1391 return (0); 1392 } 1393 1394 /* 1395 * The USB Transaction Translator: 1396 * =============================== 1397 * 1398 * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed 1399 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1400 * USB transfers. To utilize bandwidth dynamically the "scatter and 1401 * gather" principle must be applied. This means that bandwidth must 1402 * be divided into equal parts of bandwidth. With regard to USB all 1403 * data is transferred in smaller packets with length 1404 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1405 * not a constant! 1406 * 1407 * The bandwidth scheduler which I have implemented will simply pack 1408 * the USB transfers back to back until there is no more space in the 1409 * schedule. Out of the 8 microframes which the USB 2.0 standard 1410 * provides, only 6 are available for non-HIGH-speed devices. I have 1411 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1412 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1413 * this division, it is very difficult to allocate and free bandwidth 1414 * dynamically. 1415 * 1416 * NOTE about the Transaction Translator in USB HUBs: 1417 * 1418 * USB HUBs have a very simple Transaction Translator, that will 1419 * simply pipeline all the SPLIT transactions. That means that the 1420 * transactions will be executed in the order they are queued! 1421 * 1422 */ 1423 1424 /*------------------------------------------------------------------------* 1425 * usb_intr_find_best_slot 1426 * 1427 * Return value: 1428 * The best Transaction Translation slot for an interrupt endpoint. 1429 *------------------------------------------------------------------------*/ 1430 static uint8_t 1431 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1432 uint8_t end, uint8_t mask) 1433 { 1434 usb_size_t min = 0 - 1; 1435 usb_size_t sum; 1436 uint8_t x; 1437 uint8_t y; 1438 uint8_t z; 1439 1440 y = 0; 1441 1442 /* find the last slot with lesser used bandwidth */ 1443 1444 for (x = start; x < end; x++) { 1445 1446 sum = 0; 1447 1448 /* compute sum of bandwidth */ 1449 for (z = x; z < end; z++) { 1450 if (mask & (1U << (z - x))) 1451 sum += ptr[z]; 1452 } 1453 1454 /* check if the current multi-slot is more optimal */ 1455 if (min >= sum) { 1456 min = sum; 1457 y = x; 1458 } 1459 1460 /* check if the mask is about to be shifted out */ 1461 if (mask & (1U << (end - 1 - x))) 1462 break; 1463 } 1464 return (y); 1465 } 1466 1467 /*------------------------------------------------------------------------* 1468 * usb_hs_bandwidth_adjust 1469 * 1470 * This function will update the bandwith usage for the microframe 1471 * having index "slot" by "len" bytes. "len" can be negative. If the 1472 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1473 * the "slot" argument will be replaced by the slot having least used 1474 * bandwidth. The "mask" argument is used for multi-slot allocations. 1475 * 1476 * Returns: 1477 * The slot in which the bandwidth update was done: 0..7 1478 *------------------------------------------------------------------------*/ 1479 static uint8_t 1480 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1481 uint8_t slot, uint8_t mask) 1482 { 1483 struct usb_bus *bus = udev->bus; 1484 struct usb_hub *hub; 1485 enum usb_dev_speed speed; 1486 uint8_t x; 1487 1488 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1489 1490 speed = usbd_get_speed(udev); 1491 1492 switch (speed) { 1493 case USB_SPEED_LOW: 1494 case USB_SPEED_FULL: 1495 if (speed == USB_SPEED_LOW) { 1496 len *= 8; 1497 } 1498 /* 1499 * The Host Controller Driver should have 1500 * performed checks so that the lookup 1501 * below does not result in a NULL pointer 1502 * access. 1503 */ 1504 1505 hub = udev->parent_hs_hub->hub; 1506 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1507 slot = usb_intr_find_best_slot(hub->uframe_usage, 1508 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1509 } 1510 for (x = slot; x < 8; x++) { 1511 if (mask & (1U << (x - slot))) { 1512 hub->uframe_usage[x] += len; 1513 bus->uframe_usage[x] += len; 1514 } 1515 } 1516 break; 1517 default: 1518 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1519 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1520 USB_HS_MICRO_FRAMES_MAX, mask); 1521 } 1522 for (x = slot; x < 8; x++) { 1523 if (mask & (1U << (x - slot))) { 1524 bus->uframe_usage[x] += len; 1525 } 1526 } 1527 break; 1528 } 1529 return (slot); 1530 } 1531 1532 /*------------------------------------------------------------------------* 1533 * usb_hs_bandwidth_alloc 1534 * 1535 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1536 *------------------------------------------------------------------------*/ 1537 void 1538 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1539 { 1540 struct usb_device *udev; 1541 uint8_t slot; 1542 uint8_t mask; 1543 uint8_t speed; 1544 1545 udev = xfer->xroot->udev; 1546 1547 if (udev->flags.usb_mode != USB_MODE_HOST) 1548 return; /* not supported */ 1549 1550 xfer->endpoint->refcount_bw++; 1551 if (xfer->endpoint->refcount_bw != 1) 1552 return; /* already allocated */ 1553 1554 speed = usbd_get_speed(udev); 1555 1556 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1557 case UE_INTERRUPT: 1558 /* allocate a microframe slot */ 1559 1560 mask = 0x01; 1561 slot = usb_hs_bandwidth_adjust(udev, 1562 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1563 1564 xfer->endpoint->usb_uframe = slot; 1565 xfer->endpoint->usb_smask = mask << slot; 1566 1567 if ((speed != USB_SPEED_FULL) && 1568 (speed != USB_SPEED_LOW)) { 1569 xfer->endpoint->usb_cmask = 0x00 ; 1570 } else { 1571 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1572 } 1573 break; 1574 1575 case UE_ISOCHRONOUS: 1576 switch (usbd_xfer_get_fps_shift(xfer)) { 1577 case 0: 1578 mask = 0xFF; 1579 break; 1580 case 1: 1581 mask = 0x55; 1582 break; 1583 case 2: 1584 mask = 0x11; 1585 break; 1586 default: 1587 mask = 0x01; 1588 break; 1589 } 1590 1591 /* allocate a microframe multi-slot */ 1592 1593 slot = usb_hs_bandwidth_adjust(udev, 1594 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1595 1596 xfer->endpoint->usb_uframe = slot; 1597 xfer->endpoint->usb_cmask = 0; 1598 xfer->endpoint->usb_smask = mask << slot; 1599 break; 1600 1601 default: 1602 xfer->endpoint->usb_uframe = 0; 1603 xfer->endpoint->usb_cmask = 0; 1604 xfer->endpoint->usb_smask = 0; 1605 break; 1606 } 1607 1608 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1609 xfer->endpoint->usb_uframe, 1610 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1611 } 1612 1613 /*------------------------------------------------------------------------* 1614 * usb_hs_bandwidth_free 1615 * 1616 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1617 *------------------------------------------------------------------------*/ 1618 void 1619 usb_hs_bandwidth_free(struct usb_xfer *xfer) 1620 { 1621 struct usb_device *udev; 1622 uint8_t slot; 1623 uint8_t mask; 1624 1625 udev = xfer->xroot->udev; 1626 1627 if (udev->flags.usb_mode != USB_MODE_HOST) 1628 return; /* not supported */ 1629 1630 xfer->endpoint->refcount_bw--; 1631 if (xfer->endpoint->refcount_bw != 0) 1632 return; /* still allocated */ 1633 1634 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1635 case UE_INTERRUPT: 1636 case UE_ISOCHRONOUS: 1637 1638 slot = xfer->endpoint->usb_uframe; 1639 mask = xfer->endpoint->usb_smask; 1640 1641 /* free microframe slot(s): */ 1642 usb_hs_bandwidth_adjust(udev, 1643 -xfer->max_frame_size, slot, mask >> slot); 1644 1645 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1646 slot, mask >> slot); 1647 1648 xfer->endpoint->usb_uframe = 0; 1649 xfer->endpoint->usb_cmask = 0; 1650 xfer->endpoint->usb_smask = 0; 1651 break; 1652 1653 default: 1654 break; 1655 } 1656 } 1657 1658 /*------------------------------------------------------------------------* 1659 * usbd_fs_isoc_schedule_init_sub 1660 * 1661 * This function initialises an USB FULL speed isochronous schedule 1662 * entry. 1663 *------------------------------------------------------------------------*/ 1664 #if USB_HAVE_TT_SUPPORT 1665 static void 1666 usbd_fs_isoc_schedule_init_sub(struct usb_fs_isoc_schedule *fss) 1667 { 1668 fss->total_bytes = (USB_FS_ISOC_UFRAME_MAX * 1669 USB_FS_BYTES_PER_HS_UFRAME); 1670 fss->frame_bytes = (USB_FS_BYTES_PER_HS_UFRAME); 1671 fss->frame_slot = 0; 1672 } 1673 #endif 1674 1675 /*------------------------------------------------------------------------* 1676 * usbd_fs_isoc_schedule_init_all 1677 * 1678 * This function will reset the complete USB FULL speed isochronous 1679 * bandwidth schedule. 1680 *------------------------------------------------------------------------*/ 1681 #if USB_HAVE_TT_SUPPORT 1682 void 1683 usbd_fs_isoc_schedule_init_all(struct usb_fs_isoc_schedule *fss) 1684 { 1685 struct usb_fs_isoc_schedule *fss_end = fss + USB_ISOC_TIME_MAX; 1686 1687 while (fss != fss_end) { 1688 usbd_fs_isoc_schedule_init_sub(fss); 1689 fss++; 1690 } 1691 } 1692 #endif 1693 1694 /*------------------------------------------------------------------------* 1695 * usb_isoc_time_expand 1696 * 1697 * This function will expand the time counter from 7-bit to 16-bit. 1698 * 1699 * Returns: 1700 * 16-bit isochronous time counter. 1701 *------------------------------------------------------------------------*/ 1702 uint16_t 1703 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 1704 { 1705 uint16_t rem; 1706 1707 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1708 1709 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 1710 1711 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 1712 1713 if (isoc_time_curr < rem) { 1714 /* the time counter wrapped around */ 1715 bus->isoc_time_last += USB_ISOC_TIME_MAX; 1716 } 1717 /* update the remainder */ 1718 1719 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 1720 bus->isoc_time_last |= isoc_time_curr; 1721 1722 return (bus->isoc_time_last); 1723 } 1724 1725 /*------------------------------------------------------------------------* 1726 * usbd_fs_isoc_schedule_isoc_time_expand 1727 * 1728 * This function does multiple things. First of all it will expand the 1729 * passed isochronous time, which is the return value. Then it will 1730 * store where the current FULL speed isochronous schedule is 1731 * positioned in time and where the end is. See "pp_start" and 1732 * "pp_end" arguments. 1733 * 1734 * Returns: 1735 * Expanded version of "isoc_time". 1736 * 1737 * NOTE: This function depends on being called regularly with 1738 * intervals less than "USB_ISOC_TIME_MAX". 1739 *------------------------------------------------------------------------*/ 1740 #if USB_HAVE_TT_SUPPORT 1741 uint16_t 1742 usbd_fs_isoc_schedule_isoc_time_expand(struct usb_device *udev, 1743 struct usb_fs_isoc_schedule **pp_start, 1744 struct usb_fs_isoc_schedule **pp_end, 1745 uint16_t isoc_time) 1746 { 1747 struct usb_fs_isoc_schedule *fss_end; 1748 struct usb_fs_isoc_schedule *fss_a; 1749 struct usb_fs_isoc_schedule *fss_b; 1750 struct usb_hub *hs_hub; 1751 1752 isoc_time = usb_isoc_time_expand(udev->bus, isoc_time); 1753 1754 hs_hub = udev->parent_hs_hub->hub; 1755 1756 if (hs_hub != NULL) { 1757 1758 fss_a = hs_hub->fs_isoc_schedule + 1759 (hs_hub->isoc_last_time % USB_ISOC_TIME_MAX); 1760 1761 hs_hub->isoc_last_time = isoc_time; 1762 1763 fss_b = hs_hub->fs_isoc_schedule + 1764 (isoc_time % USB_ISOC_TIME_MAX); 1765 1766 fss_end = hs_hub->fs_isoc_schedule + USB_ISOC_TIME_MAX; 1767 1768 *pp_start = hs_hub->fs_isoc_schedule; 1769 *pp_end = fss_end; 1770 1771 while (fss_a != fss_b) { 1772 if (fss_a == fss_end) { 1773 fss_a = hs_hub->fs_isoc_schedule; 1774 continue; 1775 } 1776 usbd_fs_isoc_schedule_init_sub(fss_a); 1777 fss_a++; 1778 } 1779 1780 } else { 1781 1782 *pp_start = NULL; 1783 *pp_end = NULL; 1784 } 1785 return (isoc_time); 1786 } 1787 #endif 1788 1789 /*------------------------------------------------------------------------* 1790 * usbd_fs_isoc_schedule_alloc 1791 * 1792 * This function will allocate bandwidth for an isochronous FULL speed 1793 * transaction in the FULL speed schedule. The microframe slot where 1794 * the transaction should be started is stored in the byte pointed to 1795 * by "pstart". The "len" argument specifies the length of the 1796 * transaction in bytes. 1797 * 1798 * Returns: 1799 * 0: Success 1800 * Else: Error 1801 *------------------------------------------------------------------------*/ 1802 #if USB_HAVE_TT_SUPPORT 1803 uint8_t 1804 usbd_fs_isoc_schedule_alloc(struct usb_fs_isoc_schedule *fss, 1805 uint8_t *pstart, uint16_t len) 1806 { 1807 uint8_t slot = fss->frame_slot; 1808 1809 /* Compute overhead and bit-stuffing */ 1810 1811 len += 8; 1812 1813 len *= 7; 1814 len /= 6; 1815 1816 if (len > fss->total_bytes) { 1817 *pstart = 0; /* set some dummy value */ 1818 return (1); /* error */ 1819 } 1820 if (len > 0) { 1821 1822 fss->total_bytes -= len; 1823 1824 while (len >= fss->frame_bytes) { 1825 len -= fss->frame_bytes; 1826 fss->frame_bytes = USB_FS_BYTES_PER_HS_UFRAME; 1827 fss->frame_slot++; 1828 } 1829 1830 fss->frame_bytes -= len; 1831 } 1832 *pstart = slot; 1833 return (0); /* success */ 1834 } 1835 #endif 1836 1837 /*------------------------------------------------------------------------* 1838 * usb_bus_port_get_device 1839 * 1840 * This function is NULL safe. 1841 *------------------------------------------------------------------------*/ 1842 struct usb_device * 1843 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 1844 { 1845 if ((bus == NULL) || (up == NULL)) { 1846 /* be NULL safe */ 1847 return (NULL); 1848 } 1849 if (up->device_index == 0) { 1850 /* nothing to do */ 1851 return (NULL); 1852 } 1853 return (bus->devices[up->device_index]); 1854 } 1855 1856 /*------------------------------------------------------------------------* 1857 * usb_bus_port_set_device 1858 * 1859 * This function is NULL safe. 1860 *------------------------------------------------------------------------*/ 1861 void 1862 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 1863 struct usb_device *udev, uint8_t device_index) 1864 { 1865 if (bus == NULL) { 1866 /* be NULL safe */ 1867 return; 1868 } 1869 /* 1870 * There is only one case where we don't 1871 * have an USB port, and that is the Root Hub! 1872 */ 1873 if (up) { 1874 if (udev) { 1875 up->device_index = device_index; 1876 } else { 1877 device_index = up->device_index; 1878 up->device_index = 0; 1879 } 1880 } 1881 /* 1882 * Make relationships to our new device 1883 */ 1884 if (device_index != 0) { 1885 #if USB_HAVE_UGEN 1886 mtx_lock(&usb_ref_lock); 1887 #endif 1888 bus->devices[device_index] = udev; 1889 #if USB_HAVE_UGEN 1890 mtx_unlock(&usb_ref_lock); 1891 #endif 1892 } 1893 /* 1894 * Debug print 1895 */ 1896 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 1897 } 1898 1899 /*------------------------------------------------------------------------* 1900 * usb_needs_explore 1901 * 1902 * This functions is called when the USB event thread needs to run. 1903 *------------------------------------------------------------------------*/ 1904 void 1905 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 1906 { 1907 uint8_t do_unlock; 1908 1909 DPRINTF("\n"); 1910 1911 if (bus == NULL) { 1912 DPRINTF("No bus pointer!\n"); 1913 return; 1914 } 1915 if ((bus->devices == NULL) || 1916 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 1917 DPRINTF("No root HUB\n"); 1918 return; 1919 } 1920 if (mtx_owned(&bus->bus_mtx)) { 1921 do_unlock = 0; 1922 } else { 1923 USB_BUS_LOCK(bus); 1924 do_unlock = 1; 1925 } 1926 if (do_probe) { 1927 bus->do_probe = 1; 1928 } 1929 if (usb_proc_msignal(&bus->explore_proc, 1930 &bus->explore_msg[0], &bus->explore_msg[1])) { 1931 /* ignore */ 1932 } 1933 if (do_unlock) { 1934 USB_BUS_UNLOCK(bus); 1935 } 1936 } 1937 1938 /*------------------------------------------------------------------------* 1939 * usb_needs_explore_all 1940 * 1941 * This function is called whenever a new driver is loaded and will 1942 * cause that all USB busses are re-explored. 1943 *------------------------------------------------------------------------*/ 1944 void 1945 usb_needs_explore_all(void) 1946 { 1947 struct usb_bus *bus; 1948 devclass_t dc; 1949 device_t dev; 1950 int max; 1951 1952 DPRINTFN(3, "\n"); 1953 1954 dc = usb_devclass_ptr; 1955 if (dc == NULL) { 1956 DPRINTFN(0, "no devclass\n"); 1957 return; 1958 } 1959 /* 1960 * Explore all USB busses in parallell. 1961 */ 1962 max = devclass_get_maxunit(dc); 1963 while (max >= 0) { 1964 dev = devclass_get_device(dc, max); 1965 if (dev) { 1966 bus = device_get_softc(dev); 1967 if (bus) { 1968 usb_needs_explore(bus, 1); 1969 } 1970 } 1971 max--; 1972 } 1973 } 1974 1975 /*------------------------------------------------------------------------* 1976 * usb_bus_power_update 1977 * 1978 * This function will ensure that all USB devices on the given bus are 1979 * properly suspended or resumed according to the device transfer 1980 * state. 1981 *------------------------------------------------------------------------*/ 1982 #if USB_HAVE_POWERD 1983 void 1984 usb_bus_power_update(struct usb_bus *bus) 1985 { 1986 usb_needs_explore(bus, 0 /* no probe */ ); 1987 } 1988 #endif 1989 1990 /*------------------------------------------------------------------------* 1991 * usbd_transfer_power_ref 1992 * 1993 * This function will modify the power save reference counts and 1994 * wakeup the USB device associated with the given USB transfer, if 1995 * needed. 1996 *------------------------------------------------------------------------*/ 1997 #if USB_HAVE_POWERD 1998 void 1999 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 2000 { 2001 static const usb_power_mask_t power_mask[4] = { 2002 [UE_CONTROL] = USB_HW_POWER_CONTROL, 2003 [UE_BULK] = USB_HW_POWER_BULK, 2004 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 2005 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 2006 }; 2007 struct usb_device *udev; 2008 uint8_t needs_explore; 2009 uint8_t needs_hw_power; 2010 uint8_t xfer_type; 2011 2012 udev = xfer->xroot->udev; 2013 2014 if (udev->device_index == USB_ROOT_HUB_ADDR) { 2015 /* no power save for root HUB */ 2016 return; 2017 } 2018 USB_BUS_LOCK(udev->bus); 2019 2020 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 2021 2022 udev->pwr_save.last_xfer_time = ticks; 2023 udev->pwr_save.type_refs[xfer_type] += val; 2024 2025 if (xfer->flags_int.control_xfr) { 2026 udev->pwr_save.read_refs += val; 2027 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 2028 /* 2029 * It is not allowed to suspend during a 2030 * control transfer: 2031 */ 2032 udev->pwr_save.write_refs += val; 2033 } 2034 } else if (USB_GET_DATA_ISREAD(xfer)) { 2035 udev->pwr_save.read_refs += val; 2036 } else { 2037 udev->pwr_save.write_refs += val; 2038 } 2039 2040 if (val > 0) { 2041 if (udev->flags.self_suspended) 2042 needs_explore = usb_peer_should_wakeup(udev); 2043 else 2044 needs_explore = 0; 2045 2046 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2047 DPRINTF("Adding type %u to power state\n", xfer_type); 2048 udev->bus->hw_power_state |= power_mask[xfer_type]; 2049 needs_hw_power = 1; 2050 } else { 2051 needs_hw_power = 0; 2052 } 2053 } else { 2054 needs_explore = 0; 2055 needs_hw_power = 0; 2056 } 2057 2058 USB_BUS_UNLOCK(udev->bus); 2059 2060 if (needs_explore) { 2061 DPRINTF("update\n"); 2062 usb_bus_power_update(udev->bus); 2063 } else if (needs_hw_power) { 2064 DPRINTF("needs power\n"); 2065 if (udev->bus->methods->set_hw_power != NULL) { 2066 (udev->bus->methods->set_hw_power) (udev->bus); 2067 } 2068 } 2069 } 2070 #endif 2071 2072 /*------------------------------------------------------------------------* 2073 * usb_peer_should_wakeup 2074 * 2075 * This function returns non-zero if the current device should wake up. 2076 *------------------------------------------------------------------------*/ 2077 static uint8_t 2078 usb_peer_should_wakeup(struct usb_device *udev) 2079 { 2080 return ((udev->power_mode == USB_POWER_MODE_ON) || 2081 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2082 (udev->re_enumerate_wait != 0) || 2083 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2084 (udev->pwr_save.write_refs != 0) || 2085 ((udev->pwr_save.read_refs != 0) && 2086 (udev->flags.usb_mode == USB_MODE_HOST) && 2087 (usb_peer_can_wakeup(udev) == 0))); 2088 } 2089 2090 /*------------------------------------------------------------------------* 2091 * usb_bus_powerd 2092 * 2093 * This function implements the USB power daemon and is called 2094 * regularly from the USB explore thread. 2095 *------------------------------------------------------------------------*/ 2096 #if USB_HAVE_POWERD 2097 void 2098 usb_bus_powerd(struct usb_bus *bus) 2099 { 2100 struct usb_device *udev; 2101 usb_ticks_t temp; 2102 usb_ticks_t limit; 2103 usb_ticks_t mintime; 2104 usb_size_t type_refs[5]; 2105 uint8_t x; 2106 2107 limit = usb_power_timeout; 2108 if (limit == 0) 2109 limit = hz; 2110 else if (limit > 255) 2111 limit = 255 * hz; 2112 else 2113 limit = limit * hz; 2114 2115 DPRINTF("bus=%p\n", bus); 2116 2117 USB_BUS_LOCK(bus); 2118 2119 /* 2120 * The root HUB device is never suspended 2121 * and we simply skip it. 2122 */ 2123 for (x = USB_ROOT_HUB_ADDR + 1; 2124 x != bus->devices_max; x++) { 2125 2126 udev = bus->devices[x]; 2127 if (udev == NULL) 2128 continue; 2129 2130 temp = ticks - udev->pwr_save.last_xfer_time; 2131 2132 if (usb_peer_should_wakeup(udev)) { 2133 /* check if we are suspended */ 2134 if (udev->flags.self_suspended != 0) { 2135 USB_BUS_UNLOCK(bus); 2136 usb_dev_resume_peer(udev); 2137 USB_BUS_LOCK(bus); 2138 } 2139 } else if ((temp >= limit) && 2140 (udev->flags.usb_mode == USB_MODE_HOST) && 2141 (udev->flags.self_suspended == 0)) { 2142 /* try to do suspend */ 2143 2144 USB_BUS_UNLOCK(bus); 2145 usb_dev_suspend_peer(udev); 2146 USB_BUS_LOCK(bus); 2147 } 2148 } 2149 2150 /* reset counters */ 2151 2152 mintime = 0 - 1; 2153 type_refs[0] = 0; 2154 type_refs[1] = 0; 2155 type_refs[2] = 0; 2156 type_refs[3] = 0; 2157 type_refs[4] = 0; 2158 2159 /* Re-loop all the devices to get the actual state */ 2160 2161 for (x = USB_ROOT_HUB_ADDR + 1; 2162 x != bus->devices_max; x++) { 2163 2164 udev = bus->devices[x]; 2165 if (udev == NULL) 2166 continue; 2167 2168 /* we found a non-Root-Hub USB device */ 2169 type_refs[4] += 1; 2170 2171 /* "last_xfer_time" can be updated by a resume */ 2172 temp = ticks - udev->pwr_save.last_xfer_time; 2173 2174 /* 2175 * Compute minimum time since last transfer for the complete 2176 * bus: 2177 */ 2178 if (temp < mintime) 2179 mintime = temp; 2180 2181 if (udev->flags.self_suspended == 0) { 2182 type_refs[0] += udev->pwr_save.type_refs[0]; 2183 type_refs[1] += udev->pwr_save.type_refs[1]; 2184 type_refs[2] += udev->pwr_save.type_refs[2]; 2185 type_refs[3] += udev->pwr_save.type_refs[3]; 2186 } 2187 } 2188 2189 if (mintime >= (1 * hz)) { 2190 /* recompute power masks */ 2191 DPRINTF("Recomputing power masks\n"); 2192 bus->hw_power_state = 0; 2193 if (type_refs[UE_CONTROL] != 0) 2194 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2195 if (type_refs[UE_BULK] != 0) 2196 bus->hw_power_state |= USB_HW_POWER_BULK; 2197 if (type_refs[UE_INTERRUPT] != 0) 2198 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2199 if (type_refs[UE_ISOCHRONOUS] != 0) 2200 bus->hw_power_state |= USB_HW_POWER_ISOC; 2201 if (type_refs[4] != 0) 2202 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2203 } 2204 USB_BUS_UNLOCK(bus); 2205 2206 if (bus->methods->set_hw_power != NULL) { 2207 /* always update hardware power! */ 2208 (bus->methods->set_hw_power) (bus); 2209 } 2210 return; 2211 } 2212 #endif 2213 2214 /*------------------------------------------------------------------------* 2215 * usb_dev_resume_peer 2216 * 2217 * This function will resume an USB peer and do the required USB 2218 * signalling to get an USB device out of the suspended state. 2219 *------------------------------------------------------------------------*/ 2220 static void 2221 usb_dev_resume_peer(struct usb_device *udev) 2222 { 2223 struct usb_bus *bus; 2224 int err; 2225 2226 /* be NULL safe */ 2227 if (udev == NULL) 2228 return; 2229 2230 /* check if already resumed */ 2231 if (udev->flags.self_suspended == 0) 2232 return; 2233 2234 /* we need a parent HUB to do resume */ 2235 if (udev->parent_hub == NULL) 2236 return; 2237 2238 DPRINTF("udev=%p\n", udev); 2239 2240 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2241 (udev->flags.remote_wakeup == 0)) { 2242 /* 2243 * If the host did not set the remote wakeup feature, we can 2244 * not wake it up either! 2245 */ 2246 DPRINTF("remote wakeup is not set!\n"); 2247 return; 2248 } 2249 /* get bus pointer */ 2250 bus = udev->bus; 2251 2252 /* resume parent hub first */ 2253 usb_dev_resume_peer(udev->parent_hub); 2254 2255 /* reduce chance of instant resume failure by waiting a little bit */ 2256 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2257 2258 if (usb_device_20_compatible(udev)) { 2259 /* resume current port (Valid in Host and Device Mode) */ 2260 err = usbd_req_clear_port_feature(udev->parent_hub, 2261 NULL, udev->port_no, UHF_PORT_SUSPEND); 2262 if (err) { 2263 DPRINTFN(0, "Resuming port failed\n"); 2264 return; 2265 } 2266 } else { 2267 /* resume current port (Valid in Host and Device Mode) */ 2268 err = usbd_req_set_port_link_state(udev->parent_hub, 2269 NULL, udev->port_no, UPS_PORT_LS_U0); 2270 if (err) { 2271 DPRINTFN(0, "Resuming port failed\n"); 2272 return; 2273 } 2274 } 2275 2276 /* resume settle time */ 2277 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2278 2279 if (bus->methods->device_resume != NULL) { 2280 /* resume USB device on the USB controller */ 2281 (bus->methods->device_resume) (udev); 2282 } 2283 USB_BUS_LOCK(bus); 2284 /* set that this device is now resumed */ 2285 udev->flags.self_suspended = 0; 2286 #if USB_HAVE_POWERD 2287 /* make sure that we don't go into suspend right away */ 2288 udev->pwr_save.last_xfer_time = ticks; 2289 2290 /* make sure the needed power masks are on */ 2291 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2292 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2293 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2294 bus->hw_power_state |= USB_HW_POWER_BULK; 2295 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2296 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2297 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2298 bus->hw_power_state |= USB_HW_POWER_ISOC; 2299 #endif 2300 USB_BUS_UNLOCK(bus); 2301 2302 if (bus->methods->set_hw_power != NULL) { 2303 /* always update hardware power! */ 2304 (bus->methods->set_hw_power) (bus); 2305 } 2306 2307 usbd_sr_lock(udev); 2308 2309 /* notify all sub-devices about resume */ 2310 err = usb_suspend_resume(udev, 0); 2311 2312 usbd_sr_unlock(udev); 2313 2314 /* check if peer has wakeup capability */ 2315 if (usb_peer_can_wakeup(udev)) { 2316 /* clear remote wakeup */ 2317 err = usbd_req_clear_device_feature(udev, 2318 NULL, UF_DEVICE_REMOTE_WAKEUP); 2319 if (err) { 2320 DPRINTFN(0, "Clearing device " 2321 "remote wakeup failed: %s\n", 2322 usbd_errstr(err)); 2323 } 2324 } 2325 } 2326 2327 /*------------------------------------------------------------------------* 2328 * usb_dev_suspend_peer 2329 * 2330 * This function will suspend an USB peer and do the required USB 2331 * signalling to get an USB device into the suspended state. 2332 *------------------------------------------------------------------------*/ 2333 static void 2334 usb_dev_suspend_peer(struct usb_device *udev) 2335 { 2336 struct usb_device *child; 2337 int err; 2338 uint8_t x; 2339 uint8_t nports; 2340 2341 repeat: 2342 /* be NULL safe */ 2343 if (udev == NULL) 2344 return; 2345 2346 /* check if already suspended */ 2347 if (udev->flags.self_suspended) 2348 return; 2349 2350 /* we need a parent HUB to do suspend */ 2351 if (udev->parent_hub == NULL) 2352 return; 2353 2354 DPRINTF("udev=%p\n", udev); 2355 2356 /* check if the current device is a HUB */ 2357 if (udev->hub != NULL) { 2358 nports = udev->hub->nports; 2359 2360 /* check if all devices on the HUB are suspended */ 2361 for (x = 0; x != nports; x++) { 2362 child = usb_bus_port_get_device(udev->bus, 2363 udev->hub->ports + x); 2364 2365 if (child == NULL) 2366 continue; 2367 2368 if (child->flags.self_suspended) 2369 continue; 2370 2371 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2372 return; 2373 } 2374 } 2375 2376 if (usb_peer_can_wakeup(udev)) { 2377 /* 2378 * This request needs to be done before we set 2379 * "udev->flags.self_suspended": 2380 */ 2381 2382 /* allow device to do remote wakeup */ 2383 err = usbd_req_set_device_feature(udev, 2384 NULL, UF_DEVICE_REMOTE_WAKEUP); 2385 if (err) { 2386 DPRINTFN(0, "Setting device " 2387 "remote wakeup failed\n"); 2388 } 2389 } 2390 2391 USB_BUS_LOCK(udev->bus); 2392 /* 2393 * Checking for suspend condition and setting suspended bit 2394 * must be atomic! 2395 */ 2396 err = usb_peer_should_wakeup(udev); 2397 if (err == 0) { 2398 /* 2399 * Set that this device is suspended. This variable 2400 * must be set before calling USB controller suspend 2401 * callbacks. 2402 */ 2403 udev->flags.self_suspended = 1; 2404 } 2405 USB_BUS_UNLOCK(udev->bus); 2406 2407 if (err != 0) { 2408 if (usb_peer_can_wakeup(udev)) { 2409 /* allow device to do remote wakeup */ 2410 err = usbd_req_clear_device_feature(udev, 2411 NULL, UF_DEVICE_REMOTE_WAKEUP); 2412 if (err) { 2413 DPRINTFN(0, "Setting device " 2414 "remote wakeup failed\n"); 2415 } 2416 } 2417 2418 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2419 /* resume parent HUB first */ 2420 usb_dev_resume_peer(udev->parent_hub); 2421 2422 /* reduce chance of instant resume failure by waiting a little bit */ 2423 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2424 2425 /* resume current port (Valid in Host and Device Mode) */ 2426 err = usbd_req_clear_port_feature(udev->parent_hub, 2427 NULL, udev->port_no, UHF_PORT_SUSPEND); 2428 2429 /* resume settle time */ 2430 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2431 } 2432 DPRINTF("Suspend was cancelled!\n"); 2433 return; 2434 } 2435 2436 usbd_sr_lock(udev); 2437 2438 /* notify all sub-devices about suspend */ 2439 err = usb_suspend_resume(udev, 1); 2440 2441 usbd_sr_unlock(udev); 2442 2443 if (udev->bus->methods->device_suspend != NULL) { 2444 usb_timeout_t temp; 2445 2446 /* suspend device on the USB controller */ 2447 (udev->bus->methods->device_suspend) (udev); 2448 2449 /* do DMA delay */ 2450 temp = usbd_get_dma_delay(udev); 2451 if (temp != 0) 2452 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2453 2454 } 2455 2456 if (usb_device_20_compatible(udev)) { 2457 /* suspend current port */ 2458 err = usbd_req_set_port_feature(udev->parent_hub, 2459 NULL, udev->port_no, UHF_PORT_SUSPEND); 2460 if (err) { 2461 DPRINTFN(0, "Suspending port failed\n"); 2462 return; 2463 } 2464 } else { 2465 /* suspend current port */ 2466 err = usbd_req_set_port_link_state(udev->parent_hub, 2467 NULL, udev->port_no, UPS_PORT_LS_U3); 2468 if (err) { 2469 DPRINTFN(0, "Suspending port failed\n"); 2470 return; 2471 } 2472 } 2473 2474 udev = udev->parent_hub; 2475 goto repeat; 2476 } 2477 2478 /*------------------------------------------------------------------------* 2479 * usbd_set_power_mode 2480 * 2481 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2482 * USB device. 2483 *------------------------------------------------------------------------*/ 2484 void 2485 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2486 { 2487 /* filter input argument */ 2488 if ((power_mode != USB_POWER_MODE_ON) && 2489 (power_mode != USB_POWER_MODE_OFF)) 2490 power_mode = USB_POWER_MODE_SAVE; 2491 2492 power_mode = usbd_filter_power_mode(udev, power_mode); 2493 2494 udev->power_mode = power_mode; /* update copy of power mode */ 2495 2496 #if USB_HAVE_POWERD 2497 usb_bus_power_update(udev->bus); 2498 #endif 2499 } 2500 2501 /*------------------------------------------------------------------------* 2502 * usbd_filter_power_mode 2503 * 2504 * This function filters the power mode based on hardware requirements. 2505 *------------------------------------------------------------------------*/ 2506 uint8_t 2507 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2508 { 2509 struct usb_bus_methods *mtod; 2510 int8_t temp; 2511 2512 mtod = udev->bus->methods; 2513 temp = -1; 2514 2515 if (mtod->get_power_mode != NULL) 2516 (mtod->get_power_mode) (udev, &temp); 2517 2518 /* check if we should not filter */ 2519 if (temp < 0) 2520 return (power_mode); 2521 2522 /* use fixed power mode given by hardware driver */ 2523 return (temp); 2524 } 2525 2526 /*------------------------------------------------------------------------* 2527 * usbd_start_re_enumerate 2528 * 2529 * This function starts re-enumeration of the given USB device. This 2530 * function does not need to be called BUS-locked. This function does 2531 * not wait until the re-enumeration is completed. 2532 *------------------------------------------------------------------------*/ 2533 void 2534 usbd_start_re_enumerate(struct usb_device *udev) 2535 { 2536 if (udev->re_enumerate_wait == 0) { 2537 udev->re_enumerate_wait = 1; 2538 usb_needs_explore(udev->bus, 0); 2539 } 2540 } 2541