1 /* $FreeBSD$ */ 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause-NetBSD 4 * 5 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 6 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 7 * Copyright (c) 2008-2022 Hans Petter Selasky 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31 /* 32 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 33 */ 34 35 #ifdef USB_GLOBAL_INCLUDE_FILE 36 #include USB_GLOBAL_INCLUDE_FILE 37 #else 38 #include <sys/stdint.h> 39 #include <sys/stddef.h> 40 #include <sys/param.h> 41 #include <sys/queue.h> 42 #include <sys/types.h> 43 #include <sys/systm.h> 44 #include <sys/kernel.h> 45 #include <sys/bus.h> 46 #include <sys/module.h> 47 #include <sys/lock.h> 48 #include <sys/mutex.h> 49 #include <sys/condvar.h> 50 #include <sys/sbuf.h> 51 #include <sys/sysctl.h> 52 #include <sys/sx.h> 53 #include <sys/unistd.h> 54 #include <sys/callout.h> 55 #include <sys/malloc.h> 56 #include <sys/priv.h> 57 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbdi.h> 60 #include <dev/usb/usbdi_util.h> 61 62 #define USB_DEBUG_VAR uhub_debug 63 64 #include <dev/usb/usb_core.h> 65 #include <dev/usb/usb_process.h> 66 #include <dev/usb/usb_device.h> 67 #include <dev/usb/usb_request.h> 68 #include <dev/usb/usb_debug.h> 69 #include <dev/usb/usb_hub.h> 70 #include <dev/usb/usb_util.h> 71 #include <dev/usb/usb_busdma.h> 72 #include <dev/usb/usb_transfer.h> 73 #include <dev/usb/usb_dynamic.h> 74 75 #include <dev/usb/usb_controller.h> 76 #include <dev/usb/usb_bus.h> 77 #endif /* USB_GLOBAL_INCLUDE_FILE */ 78 79 #include <dev/usb/usb_hub_private.h> 80 81 #ifdef USB_DEBUG 82 static int uhub_debug = 0; 83 84 static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 85 "USB HUB"); 86 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RWTUN, &uhub_debug, 0, 87 "Debug level"); 88 #endif 89 90 #if USB_HAVE_POWERD 91 static int usb_power_timeout = 30; /* seconds */ 92 93 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RWTUN, 94 &usb_power_timeout, 0, "USB power timeout"); 95 #endif 96 97 #if USB_HAVE_DISABLE_ENUM 98 static int usb_disable_enumeration = 0; 99 SYSCTL_INT(_hw_usb, OID_AUTO, disable_enumeration, CTLFLAG_RWTUN, 100 &usb_disable_enumeration, 0, "Set to disable all USB device enumeration. " 101 "This can secure against USB devices turning evil, " 102 "for example a USB memory stick becoming a USB keyboard."); 103 104 static int usb_disable_port_power = 0; 105 SYSCTL_INT(_hw_usb, OID_AUTO, disable_port_power, CTLFLAG_RWTUN, 106 &usb_disable_port_power, 0, "Set to disable all USB port power."); 107 #endif 108 109 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 110 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 111 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 112 #define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT) 113 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 114 115 /* prototypes for type checking: */ 116 117 static device_suspend_t uhub_suspend; 118 static device_resume_t uhub_resume; 119 120 static bus_driver_added_t uhub_driver_added; 121 static bus_child_pnpinfo_t uhub_child_pnpinfo; 122 123 static usb_callback_t uhub_intr_callback; 124 #if USB_HAVE_TT_SUPPORT 125 static usb_callback_t uhub_reset_tt_callback; 126 #endif 127 128 static void usb_dev_resume_peer(struct usb_device *udev); 129 static void usb_dev_suspend_peer(struct usb_device *udev); 130 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 131 132 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 133 [UHUB_INTR_TRANSFER] = { 134 .type = UE_INTERRUPT, 135 .endpoint = UE_ADDR_ANY, 136 .direction = UE_DIR_ANY, 137 .timeout = 0, 138 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 139 .bufsize = 0, /* use wMaxPacketSize */ 140 .callback = &uhub_intr_callback, 141 .interval = UHUB_INTR_INTERVAL, 142 }, 143 #if USB_HAVE_TT_SUPPORT 144 [UHUB_RESET_TT_TRANSFER] = { 145 .type = UE_CONTROL, 146 .endpoint = 0x00, /* Control pipe */ 147 .direction = UE_DIR_ANY, 148 .bufsize = sizeof(struct usb_device_request), 149 .callback = &uhub_reset_tt_callback, 150 .timeout = 1000, /* 1 second */ 151 .usb_mode = USB_MODE_HOST, 152 }, 153 #endif 154 }; 155 156 /* 157 * driver instance for "hub" connected to "usb" 158 * and "hub" connected to "hub" 159 */ 160 static devclass_t uhub_devclass; 161 162 static device_method_t uhub_methods[] = { 163 DEVMETHOD(device_probe, uhub_probe), 164 DEVMETHOD(device_attach, uhub_attach), 165 DEVMETHOD(device_detach, uhub_detach), 166 167 DEVMETHOD(device_suspend, uhub_suspend), 168 DEVMETHOD(device_resume, uhub_resume), 169 170 DEVMETHOD(bus_child_location, uhub_child_location), 171 DEVMETHOD(bus_child_pnpinfo, uhub_child_pnpinfo), 172 DEVMETHOD(bus_get_device_path, uhub_get_device_path), 173 DEVMETHOD(bus_driver_added, uhub_driver_added), 174 DEVMETHOD_END 175 }; 176 177 driver_t uhub_driver = { 178 .name = "uhub", 179 .methods = uhub_methods, 180 .size = sizeof(struct uhub_softc) 181 }; 182 183 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); 184 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); 185 MODULE_VERSION(uhub, 1); 186 187 static void 188 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 189 { 190 struct uhub_softc *sc = usbd_xfer_softc(xfer); 191 192 switch (USB_GET_STATE(xfer)) { 193 case USB_ST_TRANSFERRED: 194 DPRINTFN(2, "\n"); 195 /* 196 * This is an indication that some port 197 * has changed status. Notify the bus 198 * event handler thread that we need 199 * to be explored again: 200 */ 201 usb_needs_explore(sc->sc_udev->bus, 0); 202 203 case USB_ST_SETUP: 204 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 205 usbd_transfer_submit(xfer); 206 break; 207 208 default: /* Error */ 209 if (xfer->error != USB_ERR_CANCELLED) { 210 /* 211 * Do a clear-stall. The "stall_pipe" flag 212 * will get cleared before next callback by 213 * the USB stack. 214 */ 215 usbd_xfer_set_stall(xfer); 216 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 217 usbd_transfer_submit(xfer); 218 } 219 break; 220 } 221 } 222 223 /*------------------------------------------------------------------------* 224 * uhub_reset_tt_proc 225 * 226 * This function starts the TT reset USB request 227 *------------------------------------------------------------------------*/ 228 #if USB_HAVE_TT_SUPPORT 229 static void 230 uhub_reset_tt_proc(struct usb_proc_msg *_pm) 231 { 232 struct usb_udev_msg *pm = (void *)_pm; 233 struct usb_device *udev = pm->udev; 234 struct usb_hub *hub; 235 struct uhub_softc *sc; 236 237 hub = udev->hub; 238 if (hub == NULL) 239 return; 240 sc = hub->hubsoftc; 241 if (sc == NULL) 242 return; 243 244 /* Change lock */ 245 USB_BUS_UNLOCK(udev->bus); 246 USB_MTX_LOCK(&sc->sc_mtx); 247 /* Start transfer */ 248 usbd_transfer_start(sc->sc_xfer[UHUB_RESET_TT_TRANSFER]); 249 /* Change lock */ 250 USB_MTX_UNLOCK(&sc->sc_mtx); 251 USB_BUS_LOCK(udev->bus); 252 } 253 #endif 254 255 /*------------------------------------------------------------------------* 256 * uhub_tt_buffer_reset_async_locked 257 * 258 * This function queues a TT reset for the given USB device and endpoint. 259 *------------------------------------------------------------------------*/ 260 #if USB_HAVE_TT_SUPPORT 261 void 262 uhub_tt_buffer_reset_async_locked(struct usb_device *child, struct usb_endpoint *ep) 263 { 264 struct usb_device_request req; 265 struct usb_device *udev; 266 struct usb_hub *hub; 267 struct usb_port *up; 268 uint16_t wValue; 269 uint8_t port; 270 271 if (child == NULL || ep == NULL) 272 return; 273 274 udev = child->parent_hs_hub; 275 port = child->hs_port_no; 276 277 if (udev == NULL) 278 return; 279 280 hub = udev->hub; 281 if ((hub == NULL) || 282 (udev->speed != USB_SPEED_HIGH) || 283 (child->speed != USB_SPEED_LOW && 284 child->speed != USB_SPEED_FULL) || 285 (child->flags.usb_mode != USB_MODE_HOST) || 286 (port == 0) || (ep->edesc == NULL)) { 287 /* not applicable */ 288 return; 289 } 290 291 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); 292 293 up = hub->ports + port - 1; 294 295 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 296 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 297 port = 1; 298 299 /* if we already received a clear buffer request, reset the whole TT */ 300 if (up->req_reset_tt.bRequest != 0) { 301 req.bmRequestType = UT_WRITE_CLASS_OTHER; 302 req.bRequest = UR_RESET_TT; 303 USETW(req.wValue, 0); 304 req.wIndex[0] = port; 305 req.wIndex[1] = 0; 306 USETW(req.wLength, 0); 307 } else { 308 wValue = (ep->edesc->bEndpointAddress & 0xF) | 309 ((child->address & 0x7F) << 4) | 310 ((ep->edesc->bEndpointAddress & 0x80) << 8) | 311 ((ep->edesc->bmAttributes & 3) << 12); 312 313 req.bmRequestType = UT_WRITE_CLASS_OTHER; 314 req.bRequest = UR_CLEAR_TT_BUFFER; 315 USETW(req.wValue, wValue); 316 req.wIndex[0] = port; 317 req.wIndex[1] = 0; 318 USETW(req.wLength, 0); 319 } 320 up->req_reset_tt = req; 321 /* get reset transfer started */ 322 usb_proc_msignal(USB_BUS_TT_PROC(udev->bus), 323 &hub->tt_msg[0], &hub->tt_msg[1]); 324 } 325 #endif 326 327 #if USB_HAVE_TT_SUPPORT 328 static void 329 uhub_reset_tt_callback(struct usb_xfer *xfer, usb_error_t error) 330 { 331 struct uhub_softc *sc; 332 struct usb_device *udev; 333 struct usb_port *up; 334 uint8_t x; 335 336 DPRINTF("TT buffer reset\n"); 337 338 sc = usbd_xfer_softc(xfer); 339 udev = sc->sc_udev; 340 341 switch (USB_GET_STATE(xfer)) { 342 case USB_ST_TRANSFERRED: 343 case USB_ST_SETUP: 344 tr_setup: 345 USB_BUS_LOCK(udev->bus); 346 /* find first port which needs a TT reset */ 347 for (x = 0; x != udev->hub->nports; x++) { 348 up = udev->hub->ports + x; 349 350 if (up->req_reset_tt.bRequest == 0) 351 continue; 352 353 /* copy in the transfer */ 354 usbd_copy_in(xfer->frbuffers, 0, &up->req_reset_tt, 355 sizeof(up->req_reset_tt)); 356 /* reset buffer */ 357 memset(&up->req_reset_tt, 0, sizeof(up->req_reset_tt)); 358 359 /* set length */ 360 usbd_xfer_set_frame_len(xfer, 0, sizeof(up->req_reset_tt)); 361 xfer->nframes = 1; 362 USB_BUS_UNLOCK(udev->bus); 363 364 usbd_transfer_submit(xfer); 365 return; 366 } 367 USB_BUS_UNLOCK(udev->bus); 368 break; 369 370 default: 371 if (error == USB_ERR_CANCELLED) 372 break; 373 374 DPRINTF("TT buffer reset failed (%s)\n", usbd_errstr(error)); 375 goto tr_setup; 376 } 377 } 378 #endif 379 380 /*------------------------------------------------------------------------* 381 * uhub_count_active_host_ports 382 * 383 * This function counts the number of active ports at the given speed. 384 *------------------------------------------------------------------------*/ 385 uint8_t 386 uhub_count_active_host_ports(struct usb_device *udev, enum usb_dev_speed speed) 387 { 388 struct uhub_softc *sc; 389 struct usb_device *child; 390 struct usb_hub *hub; 391 struct usb_port *up; 392 uint8_t retval = 0; 393 uint8_t x; 394 395 if (udev == NULL) 396 goto done; 397 hub = udev->hub; 398 if (hub == NULL) 399 goto done; 400 sc = hub->hubsoftc; 401 if (sc == NULL) 402 goto done; 403 404 for (x = 0; x != hub->nports; x++) { 405 up = hub->ports + x; 406 child = usb_bus_port_get_device(udev->bus, up); 407 if (child != NULL && 408 child->flags.usb_mode == USB_MODE_HOST && 409 child->speed == speed) 410 retval++; 411 } 412 done: 413 return (retval); 414 } 415 416 void 417 uhub_explore_handle_re_enumerate(struct usb_device *child) 418 { 419 uint8_t do_unlock; 420 usb_error_t err; 421 422 /* check if device should be re-enumerated */ 423 if (child->flags.usb_mode != USB_MODE_HOST) 424 return; 425 426 do_unlock = usbd_enum_lock(child); 427 switch (child->re_enumerate_wait) { 428 case USB_RE_ENUM_START: 429 err = usbd_set_config_index(child, 430 USB_UNCONFIG_INDEX); 431 if (err != 0) { 432 DPRINTF("Unconfigure failed: %s: Ignored.\n", 433 usbd_errstr(err)); 434 } 435 if (child->parent_hub == NULL) { 436 /* the root HUB cannot be re-enumerated */ 437 DPRINTFN(6, "cannot reset root HUB\n"); 438 err = 0; 439 } else { 440 err = usbd_req_re_enumerate(child, NULL); 441 } 442 if (err == 0) { 443 /* refresh device strings */ 444 usb_get_langid(child); 445 usb_set_device_strings(child); 446 447 /* set default configuration */ 448 err = usbd_set_config_index(child, 0); 449 } 450 if (err == 0) { 451 err = usb_probe_and_attach(child, 452 USB_IFACE_INDEX_ANY); 453 } 454 child->re_enumerate_wait = USB_RE_ENUM_DONE; 455 break; 456 457 case USB_RE_ENUM_PWR_OFF: 458 /* get the device unconfigured */ 459 err = usbd_set_config_index(child, 460 USB_UNCONFIG_INDEX); 461 if (err) { 462 DPRINTFN(0, "Could not unconfigure " 463 "device (ignored)\n"); 464 } 465 if (child->parent_hub == NULL) { 466 /* the root HUB cannot be re-enumerated */ 467 DPRINTFN(6, "cannot set port feature\n"); 468 err = 0; 469 } else { 470 /* clear port enable */ 471 err = usbd_req_clear_port_feature(child->parent_hub, 472 NULL, child->port_no, UHF_PORT_ENABLE); 473 if (err) { 474 DPRINTFN(0, "Could not disable port " 475 "(ignored)\n"); 476 } 477 } 478 child->re_enumerate_wait = USB_RE_ENUM_DONE; 479 break; 480 481 case USB_RE_ENUM_SET_CONFIG: 482 err = usbd_set_config_index(child, 483 child->next_config_index); 484 if (err != 0) { 485 DPRINTF("Configure failed: %s: Ignored.\n", 486 usbd_errstr(err)); 487 } else { 488 err = usb_probe_and_attach(child, 489 USB_IFACE_INDEX_ANY); 490 } 491 child->re_enumerate_wait = USB_RE_ENUM_DONE; 492 break; 493 494 default: 495 child->re_enumerate_wait = USB_RE_ENUM_DONE; 496 break; 497 } 498 if (do_unlock) 499 usbd_enum_unlock(child); 500 } 501 502 /*------------------------------------------------------------------------* 503 * uhub_explore_sub - subroutine 504 * 505 * Return values: 506 * 0: Success 507 * Else: A control transaction failed 508 *------------------------------------------------------------------------*/ 509 static usb_error_t 510 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 511 { 512 struct usb_bus *bus; 513 struct usb_device *child; 514 uint8_t refcount; 515 usb_error_t err; 516 517 bus = sc->sc_udev->bus; 518 err = USB_ERR_NORMAL_COMPLETION; 519 520 /* get driver added refcount from USB bus */ 521 refcount = bus->driver_added_refcount; 522 523 /* get device assosiated with the given port */ 524 child = usb_bus_port_get_device(bus, up); 525 if (child == NULL) { 526 /* nothing to do */ 527 goto done; 528 } 529 530 uhub_explore_handle_re_enumerate(child); 531 532 /* check if probe and attach should be done */ 533 534 if (child->driver_added_refcount != refcount) { 535 child->driver_added_refcount = refcount; 536 err = usb_probe_and_attach(child, 537 USB_IFACE_INDEX_ANY); 538 if (err) { 539 goto done; 540 } 541 } 542 /* start control transfer, if device mode */ 543 544 if (child->flags.usb_mode == USB_MODE_DEVICE) 545 usbd_ctrl_transfer_setup(child); 546 547 /* if a HUB becomes present, do a recursive HUB explore */ 548 549 if (child->hub) 550 err = (child->hub->explore) (child); 551 552 done: 553 return (err); 554 } 555 556 /*------------------------------------------------------------------------* 557 * uhub_read_port_status - factored out code 558 *------------------------------------------------------------------------*/ 559 static usb_error_t 560 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 561 { 562 struct usb_port_status ps; 563 usb_error_t err; 564 565 if (sc->sc_usb_port_errors >= UHUB_USB_PORT_ERRORS_MAX) { 566 DPRINTFN(4, "port %d, HUB looks dead, too many errors\n", portno); 567 sc->sc_st.port_status = 0; 568 sc->sc_st.port_change = 0; 569 return (USB_ERR_TIMEOUT); 570 } 571 572 err = usbd_req_get_port_status( 573 sc->sc_udev, NULL, &ps, portno); 574 575 if (err == 0) { 576 sc->sc_st.port_status = UGETW(ps.wPortStatus); 577 sc->sc_st.port_change = UGETW(ps.wPortChange); 578 sc->sc_usb_port_errors = 0; 579 } else { 580 sc->sc_st.port_status = 0; 581 sc->sc_st.port_change = 0; 582 sc->sc_usb_port_errors++; 583 } 584 585 /* debugging print */ 586 587 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 588 "wPortChange=0x%04x, err=%s\n", 589 portno, sc->sc_st.port_status, 590 sc->sc_st.port_change, usbd_errstr(err)); 591 return (err); 592 } 593 594 /*------------------------------------------------------------------------* 595 * uhub_reattach_port 596 * 597 * Returns: 598 * 0: Success 599 * Else: A control transaction failed 600 *------------------------------------------------------------------------*/ 601 static usb_error_t 602 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 603 { 604 struct usb_device *child; 605 struct usb_device *udev; 606 enum usb_dev_speed speed; 607 enum usb_hc_mode mode; 608 usb_error_t err; 609 uint16_t power_mask; 610 uint8_t timeout; 611 612 DPRINTF("reattaching port %d\n", portno); 613 614 timeout = 0; 615 udev = sc->sc_udev; 616 child = usb_bus_port_get_device(udev->bus, 617 udev->hub->ports + portno - 1); 618 619 repeat: 620 621 /* first clear the port connection change bit */ 622 623 err = usbd_req_clear_port_feature(udev, NULL, 624 portno, UHF_C_PORT_CONNECTION); 625 626 if (err) 627 goto error; 628 629 /* check if there is a child */ 630 631 if (child != NULL) { 632 /* 633 * Free USB device and all subdevices, if any. 634 */ 635 usb_free_device(child, 0); 636 child = NULL; 637 } 638 /* get fresh status */ 639 640 err = uhub_read_port_status(sc, portno); 641 if (err) 642 goto error; 643 644 #if USB_HAVE_DISABLE_ENUM 645 /* check if we should skip enumeration from this USB HUB */ 646 if (usb_disable_enumeration != 0 || 647 sc->sc_disable_enumeration != 0) { 648 DPRINTF("Enumeration is disabled!\n"); 649 goto error; 650 } 651 #endif 652 /* check if nothing is connected to the port */ 653 654 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) 655 goto error; 656 657 /* check if there is no power on the port and print a warning */ 658 659 switch (udev->speed) { 660 case USB_SPEED_HIGH: 661 case USB_SPEED_FULL: 662 case USB_SPEED_LOW: 663 power_mask = UPS_PORT_POWER; 664 break; 665 case USB_SPEED_SUPER: 666 if (udev->parent_hub == NULL) 667 power_mask = 0; /* XXX undefined */ 668 else 669 power_mask = UPS_PORT_POWER_SS; 670 break; 671 default: 672 power_mask = 0; 673 break; 674 } 675 if ((sc->sc_st.port_status & power_mask) != power_mask) { 676 DPRINTF("WARNING: strange, connected port %d " 677 "has no power\n", portno); 678 } 679 680 /* check if the device is in Host Mode */ 681 682 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 683 DPRINTF("Port %d is in Host Mode\n", portno); 684 685 if (sc->sc_st.port_status & UPS_SUSPEND) { 686 /* 687 * NOTE: Should not get here in SuperSpeed 688 * mode, because the HUB should report this 689 * bit as zero. 690 */ 691 DPRINTF("Port %d was still " 692 "suspended, clearing.\n", portno); 693 err = usbd_req_clear_port_feature(udev, 694 NULL, portno, UHF_PORT_SUSPEND); 695 } 696 697 /* USB Host Mode */ 698 699 /* wait for maximum device power up time */ 700 701 usb_pause_mtx(NULL, 702 USB_MS_TO_TICKS(usb_port_powerup_delay)); 703 704 /* reset port, which implies enabling it */ 705 706 err = usbd_req_reset_port(udev, NULL, portno); 707 708 if (err) { 709 DPRINTFN(0, "port %d reset " 710 "failed, error=%s\n", 711 portno, usbd_errstr(err)); 712 goto error; 713 } 714 /* get port status again, it might have changed during reset */ 715 716 err = uhub_read_port_status(sc, portno); 717 if (err) { 718 goto error; 719 } 720 /* check if something changed during port reset */ 721 722 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 723 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 724 if (timeout) { 725 DPRINTFN(1, "giving up port %d reset - " 726 "device vanished: change %#x status %#x\n", 727 portno, sc->sc_st.port_change, 728 sc->sc_st.port_status); 729 goto error; 730 } 731 timeout = 1; 732 goto repeat; 733 } 734 } else { 735 DPRINTF("Port %d is in Device Mode\n", portno); 736 } 737 738 /* 739 * Figure out the device speed 740 */ 741 switch (udev->speed) { 742 case USB_SPEED_HIGH: 743 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 744 speed = USB_SPEED_HIGH; 745 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 746 speed = USB_SPEED_LOW; 747 else 748 speed = USB_SPEED_FULL; 749 break; 750 case USB_SPEED_FULL: 751 if (sc->sc_st.port_status & UPS_LOW_SPEED) 752 speed = USB_SPEED_LOW; 753 else 754 speed = USB_SPEED_FULL; 755 break; 756 case USB_SPEED_LOW: 757 speed = USB_SPEED_LOW; 758 break; 759 case USB_SPEED_SUPER: 760 if (udev->parent_hub == NULL) { 761 /* Root HUB - special case */ 762 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 763 case 0: 764 speed = USB_SPEED_FULL; 765 break; 766 case UPS_LOW_SPEED: 767 speed = USB_SPEED_LOW; 768 break; 769 case UPS_HIGH_SPEED: 770 speed = USB_SPEED_HIGH; 771 break; 772 default: 773 speed = USB_SPEED_SUPER; 774 break; 775 } 776 } else { 777 speed = USB_SPEED_SUPER; 778 } 779 break; 780 default: 781 /* same speed like parent */ 782 speed = udev->speed; 783 break; 784 } 785 if (speed == USB_SPEED_SUPER) { 786 err = usbd_req_set_hub_u1_timeout(udev, NULL, 787 portno, 128 - (2 * udev->depth)); 788 if (err) { 789 DPRINTFN(0, "port %d U1 timeout " 790 "failed, error=%s\n", 791 portno, usbd_errstr(err)); 792 } 793 err = usbd_req_set_hub_u2_timeout(udev, NULL, 794 portno, 128 - (2 * udev->depth)); 795 if (err) { 796 DPRINTFN(0, "port %d U2 timeout " 797 "failed, error=%s\n", 798 portno, usbd_errstr(err)); 799 } 800 } 801 802 /* 803 * Figure out the device mode 804 * 805 * NOTE: This part is currently FreeBSD specific. 806 */ 807 if (udev->parent_hub != NULL) { 808 /* inherit mode from the parent HUB */ 809 mode = udev->parent_hub->flags.usb_mode; 810 } else if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 811 mode = USB_MODE_DEVICE; 812 else 813 mode = USB_MODE_HOST; 814 815 /* need to create a new child */ 816 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 817 udev->depth + 1, portno - 1, portno, speed, mode); 818 if (child == NULL) { 819 DPRINTFN(0, "could not allocate new device\n"); 820 goto error; 821 } 822 return (0); /* success */ 823 824 error: 825 if (child != NULL) { 826 /* 827 * Free USB device and all subdevices, if any. 828 */ 829 usb_free_device(child, 0); 830 child = NULL; 831 } 832 if (err == 0) { 833 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 834 err = usbd_req_clear_port_feature( 835 sc->sc_udev, NULL, 836 portno, UHF_PORT_ENABLE); 837 } 838 } 839 if (err) { 840 DPRINTFN(0, "device problem (%s), " 841 "disabling port %d\n", usbd_errstr(err), portno); 842 } 843 return (err); 844 } 845 846 /*------------------------------------------------------------------------* 847 * usb_device_20_compatible 848 * 849 * Returns: 850 * 0: HUB does not support suspend and resume 851 * Else: HUB supports suspend and resume 852 *------------------------------------------------------------------------*/ 853 static uint8_t 854 usb_device_20_compatible(struct usb_device *udev) 855 { 856 if (udev == NULL) 857 return (0); 858 switch (udev->speed) { 859 case USB_SPEED_LOW: 860 case USB_SPEED_FULL: 861 case USB_SPEED_HIGH: 862 return (1); 863 default: 864 return (0); 865 } 866 } 867 868 /*------------------------------------------------------------------------* 869 * uhub_suspend_resume_port 870 * 871 * Returns: 872 * 0: Success 873 * Else: A control transaction failed 874 *------------------------------------------------------------------------*/ 875 static usb_error_t 876 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 877 { 878 struct usb_device *child; 879 struct usb_device *udev; 880 uint8_t is_suspend; 881 usb_error_t err; 882 883 DPRINTF("port %d\n", portno); 884 885 udev = sc->sc_udev; 886 child = usb_bus_port_get_device(udev->bus, 887 udev->hub->ports + portno - 1); 888 889 /* first clear the port suspend change bit */ 890 891 if (usb_device_20_compatible(udev)) { 892 err = usbd_req_clear_port_feature(udev, NULL, 893 portno, UHF_C_PORT_SUSPEND); 894 } else { 895 err = usbd_req_clear_port_feature(udev, NULL, 896 portno, UHF_C_PORT_LINK_STATE); 897 } 898 899 if (err) { 900 DPRINTF("clearing suspend failed.\n"); 901 goto done; 902 } 903 /* get fresh status */ 904 905 err = uhub_read_port_status(sc, portno); 906 if (err) { 907 DPRINTF("reading port status failed.\n"); 908 goto done; 909 } 910 /* convert current state */ 911 912 if (usb_device_20_compatible(udev)) { 913 if (sc->sc_st.port_status & UPS_SUSPEND) { 914 is_suspend = 1; 915 } else { 916 is_suspend = 0; 917 } 918 } else { 919 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 920 case UPS_PORT_LS_U3: 921 is_suspend = 1; 922 break; 923 case UPS_PORT_LS_SS_INA: 924 usbd_req_warm_reset_port(udev, NULL, portno); 925 is_suspend = 0; 926 break; 927 default: 928 is_suspend = 0; 929 break; 930 } 931 } 932 933 DPRINTF("suspended=%u\n", is_suspend); 934 935 /* do the suspend or resume */ 936 937 if (child) { 938 /* 939 * This code handle two cases: 1) Host Mode - we can only 940 * receive resume here 2) Device Mode - we can receive 941 * suspend and resume here 942 */ 943 if (is_suspend == 0) 944 usb_dev_resume_peer(child); 945 else if (child->flags.usb_mode == USB_MODE_DEVICE) 946 usb_dev_suspend_peer(child); 947 } 948 done: 949 return (err); 950 } 951 952 /*------------------------------------------------------------------------* 953 * uhub_root_interrupt 954 * 955 * This function is called when a Root HUB interrupt has 956 * happened. "ptr" and "len" makes up the Root HUB interrupt 957 * packet. This function is called having the "bus_mtx" locked. 958 *------------------------------------------------------------------------*/ 959 void 960 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) 961 { 962 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 963 964 usb_needs_explore(bus, 0); 965 } 966 967 static uint8_t 968 uhub_is_too_deep(struct usb_device *udev) 969 { 970 switch (udev->speed) { 971 case USB_SPEED_FULL: 972 case USB_SPEED_LOW: 973 case USB_SPEED_HIGH: 974 if (udev->depth > USB_HUB_MAX_DEPTH) 975 return (1); 976 break; 977 case USB_SPEED_SUPER: 978 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 979 return (1); 980 break; 981 default: 982 break; 983 } 984 return (0); 985 } 986 987 /*------------------------------------------------------------------------* 988 * uhub_explore 989 * 990 * Returns: 991 * 0: Success 992 * Else: Failure 993 *------------------------------------------------------------------------*/ 994 static usb_error_t 995 uhub_explore(struct usb_device *udev) 996 { 997 struct usb_hub *hub; 998 struct uhub_softc *sc; 999 struct usb_port *up; 1000 usb_error_t retval; 1001 usb_error_t err; 1002 uint8_t portno; 1003 uint8_t x; 1004 uint8_t do_unlock; 1005 1006 hub = udev->hub; 1007 sc = hub->hubsoftc; 1008 1009 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 1010 1011 /* ignore devices that are too deep */ 1012 if (uhub_is_too_deep(udev)) 1013 return (USB_ERR_TOO_DEEP); 1014 1015 /* check if device is suspended */ 1016 if (udev->flags.self_suspended) { 1017 /* need to wait until the child signals resume */ 1018 DPRINTF("Device is suspended!\n"); 1019 return (USB_ERR_NORMAL_COMPLETION); 1020 } 1021 1022 /* 1023 * Make sure we don't race against user-space applications 1024 * like LibUSB: 1025 */ 1026 do_unlock = usbd_enum_lock(udev); 1027 1028 /* 1029 * Set default error code to avoid compiler warnings. 1030 * Note that hub->nports cannot be zero. 1031 */ 1032 retval = USB_ERR_NORMAL_COMPLETION; 1033 1034 for (x = 0; x != hub->nports; x++) { 1035 up = hub->ports + x; 1036 portno = x + 1; 1037 1038 err = uhub_read_port_status(sc, portno); 1039 if (err != USB_ERR_NORMAL_COMPLETION) 1040 retval = err; 1041 1042 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 1043 DPRINTF("Overcurrent on port %u.\n", portno); 1044 err = usbd_req_clear_port_feature( 1045 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 1046 if (err != USB_ERR_NORMAL_COMPLETION) 1047 retval = err; 1048 } 1049 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 1050 /* 1051 * Fake a connect status change so that the 1052 * status gets checked initially! 1053 */ 1054 sc->sc_st.port_change |= 1055 UPS_C_CONNECT_STATUS; 1056 } 1057 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 1058 err = usbd_req_clear_port_feature( 1059 udev, NULL, portno, UHF_C_PORT_ENABLE); 1060 if (err != USB_ERR_NORMAL_COMPLETION) 1061 retval = err; 1062 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 1063 /* 1064 * Ignore the port error if the device 1065 * has vanished ! 1066 */ 1067 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 1068 DPRINTFN(0, "illegal enable change, " 1069 "port %d\n", portno); 1070 } else { 1071 if (up->restartcnt == USB_RESTART_MAX) { 1072 /* XXX could try another speed ? */ 1073 DPRINTFN(0, "port error, giving up " 1074 "port %d\n", portno); 1075 } else { 1076 sc->sc_st.port_change |= 1077 UPS_C_CONNECT_STATUS; 1078 up->restartcnt++; 1079 } 1080 } 1081 } 1082 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 1083 err = uhub_reattach_port(sc, portno); 1084 if (err != USB_ERR_NORMAL_COMPLETION) 1085 retval = err; 1086 } 1087 if (sc->sc_st.port_change & (UPS_C_SUSPEND | 1088 UPS_C_PORT_LINK_STATE)) { 1089 err = uhub_suspend_resume_port(sc, portno); 1090 if (err != USB_ERR_NORMAL_COMPLETION) 1091 retval = err; 1092 } 1093 1094 if (uhub_explore_sub(sc, up) == USB_ERR_NORMAL_COMPLETION) { 1095 /* explore succeeded - reset restart counter */ 1096 up->restartcnt = 0; 1097 } 1098 } 1099 1100 if (do_unlock) 1101 usbd_enum_unlock(udev); 1102 1103 /* initial status checked */ 1104 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 1105 1106 return (retval); 1107 } 1108 1109 int 1110 uhub_probe(device_t dev) 1111 { 1112 struct usb_attach_arg *uaa = device_get_ivars(dev); 1113 1114 if (uaa->usb_mode != USB_MODE_HOST) 1115 return (ENXIO); 1116 1117 /* 1118 * The subclass for USB HUBs is currently ignored because it 1119 * is 0 for some and 1 for others. 1120 */ 1121 if (uaa->info.bConfigIndex == 0 && 1122 uaa->info.bDeviceClass == UDCLASS_HUB) 1123 return (BUS_PROBE_DEFAULT); 1124 1125 return (ENXIO); 1126 } 1127 1128 /* NOTE: The information returned by this function can be wrong. */ 1129 usb_error_t 1130 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 1131 { 1132 struct usb_hub_descriptor hubdesc20; 1133 struct usb_hub_ss_descriptor hubdesc30; 1134 usb_error_t err; 1135 uint8_t nports; 1136 uint8_t tt; 1137 1138 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 1139 return (USB_ERR_INVAL); 1140 1141 nports = 0; 1142 tt = 0; 1143 1144 switch (udev->speed) { 1145 case USB_SPEED_LOW: 1146 case USB_SPEED_FULL: 1147 case USB_SPEED_HIGH: 1148 /* assuming that there is one port */ 1149 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 1150 if (err) { 1151 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 1152 "error=%s\n", usbd_errstr(err)); 1153 break; 1154 } 1155 nports = hubdesc20.bNbrPorts; 1156 if (nports > 127) 1157 nports = 127; 1158 1159 if (udev->speed == USB_SPEED_HIGH) 1160 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 1161 break; 1162 1163 case USB_SPEED_SUPER: 1164 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1165 if (err) { 1166 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1167 "error=%s\n", usbd_errstr(err)); 1168 break; 1169 } 1170 nports = hubdesc30.bNbrPorts; 1171 if (nports > 16) 1172 nports = 16; 1173 break; 1174 1175 default: 1176 err = USB_ERR_INVAL; 1177 break; 1178 } 1179 1180 if (pnports != NULL) 1181 *pnports = nports; 1182 1183 if (ptt != NULL) 1184 *ptt = tt; 1185 1186 return (err); 1187 } 1188 1189 int 1190 uhub_attach(device_t dev) 1191 { 1192 struct uhub_softc *sc = device_get_softc(dev); 1193 struct usb_attach_arg *uaa = device_get_ivars(dev); 1194 struct usb_device *udev = uaa->device; 1195 struct usb_device *parent_hub = udev->parent_hub; 1196 struct usb_hub *hub; 1197 struct usb_hub_descriptor hubdesc20; 1198 struct usb_hub_ss_descriptor hubdesc30; 1199 #if USB_HAVE_DISABLE_ENUM 1200 struct sysctl_ctx_list *sysctl_ctx; 1201 struct sysctl_oid *sysctl_tree; 1202 #endif 1203 uint16_t pwrdly; 1204 uint16_t nports; 1205 uint8_t x; 1206 uint8_t portno; 1207 uint8_t removable; 1208 uint8_t iface_index; 1209 usb_error_t err; 1210 1211 sc->sc_udev = udev; 1212 sc->sc_dev = dev; 1213 1214 mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); 1215 1216 device_set_usb_desc(dev); 1217 1218 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 1219 "parent->selfpowered=%d\n", 1220 udev->depth, 1221 udev->flags.self_powered, 1222 parent_hub, 1223 parent_hub ? 1224 parent_hub->flags.self_powered : 0); 1225 1226 if (uhub_is_too_deep(udev)) { 1227 DPRINTFN(0, "HUB at depth %d, " 1228 "exceeds maximum. HUB ignored\n", (int)udev->depth); 1229 goto error; 1230 } 1231 1232 if (!udev->flags.self_powered && parent_hub && 1233 !parent_hub->flags.self_powered) { 1234 DPRINTFN(0, "Bus powered HUB connected to " 1235 "bus powered HUB. HUB ignored\n"); 1236 goto error; 1237 } 1238 1239 if (UHUB_IS_MULTI_TT(sc)) { 1240 err = usbd_set_alt_interface_index(udev, 0, 1); 1241 if (err) { 1242 device_printf(dev, "MTT could not be enabled\n"); 1243 goto error; 1244 } 1245 device_printf(dev, "MTT enabled\n"); 1246 } 1247 1248 /* get HUB descriptor */ 1249 1250 DPRINTFN(2, "Getting HUB descriptor\n"); 1251 1252 switch (udev->speed) { 1253 case USB_SPEED_LOW: 1254 case USB_SPEED_FULL: 1255 case USB_SPEED_HIGH: 1256 /* assuming that there is one port */ 1257 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 1258 if (err) { 1259 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 1260 "error=%s\n", usbd_errstr(err)); 1261 goto error; 1262 } 1263 /* get number of ports */ 1264 nports = hubdesc20.bNbrPorts; 1265 1266 /* get power delay */ 1267 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1268 usb_extra_power_up_time); 1269 1270 /* get complete HUB descriptor */ 1271 if (nports >= 8) { 1272 /* check number of ports */ 1273 if (nports > 127) { 1274 DPRINTFN(0, "Invalid number of USB 2.0 ports," 1275 "error=%s\n", usbd_errstr(err)); 1276 goto error; 1277 } 1278 /* get complete HUB descriptor */ 1279 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 1280 1281 if (err) { 1282 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1283 "error=%s\n", usbd_errstr(err)); 1284 goto error; 1285 } 1286 if (hubdesc20.bNbrPorts != nports) { 1287 DPRINTFN(0, "Number of ports changed\n"); 1288 goto error; 1289 } 1290 } 1291 break; 1292 case USB_SPEED_SUPER: 1293 if (udev->parent_hub != NULL) { 1294 err = usbd_req_set_hub_depth(udev, NULL, 1295 udev->depth - 1); 1296 if (err) { 1297 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 1298 "error=%s\n", usbd_errstr(err)); 1299 goto error; 1300 } 1301 } 1302 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1303 if (err) { 1304 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1305 "error=%s\n", usbd_errstr(err)); 1306 goto error; 1307 } 1308 /* get number of ports */ 1309 nports = hubdesc30.bNbrPorts; 1310 1311 /* get power delay */ 1312 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1313 usb_extra_power_up_time); 1314 1315 /* get complete HUB descriptor */ 1316 if (nports >= 8) { 1317 /* check number of ports */ 1318 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 1319 DPRINTFN(0, "Invalid number of USB 3.0 ports," 1320 "error=%s\n", usbd_errstr(err)); 1321 goto error; 1322 } 1323 /* get complete HUB descriptor */ 1324 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 1325 1326 if (err) { 1327 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1328 "error=%s\n", usbd_errstr(err)); 1329 goto error; 1330 } 1331 if (hubdesc30.bNbrPorts != nports) { 1332 DPRINTFN(0, "Number of ports changed\n"); 1333 goto error; 1334 } 1335 } 1336 break; 1337 default: 1338 DPRINTF("Assuming HUB has only one port\n"); 1339 /* default number of ports */ 1340 nports = 1; 1341 /* default power delay */ 1342 pwrdly = ((10 * UHD_PWRON_FACTOR) + usb_extra_power_up_time); 1343 break; 1344 } 1345 if (nports == 0) { 1346 DPRINTFN(0, "portless HUB\n"); 1347 goto error; 1348 } 1349 if (nports > USB_MAX_PORTS) { 1350 DPRINTF("Port limit exceeded\n"); 1351 goto error; 1352 } 1353 #if (USB_HAVE_FIXED_PORT == 0) 1354 hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1355 M_USBDEV, M_WAITOK | M_ZERO); 1356 1357 if (hub == NULL) 1358 goto error; 1359 #else 1360 hub = &sc->sc_hub; 1361 #endif 1362 udev->hub = hub; 1363 1364 /* initialize HUB structure */ 1365 hub->hubsoftc = sc; 1366 hub->explore = &uhub_explore; 1367 hub->nports = nports; 1368 hub->hubudev = udev; 1369 #if USB_HAVE_TT_SUPPORT 1370 hub->tt_msg[0].hdr.pm_callback = &uhub_reset_tt_proc; 1371 hub->tt_msg[0].udev = udev; 1372 hub->tt_msg[1].hdr.pm_callback = &uhub_reset_tt_proc; 1373 hub->tt_msg[1].udev = udev; 1374 #endif 1375 /* if self powered hub, give ports maximum current */ 1376 if (udev->flags.self_powered) { 1377 hub->portpower = USB_MAX_POWER; 1378 } else { 1379 hub->portpower = USB_MIN_POWER; 1380 } 1381 1382 /* set up interrupt pipe */ 1383 iface_index = 0; 1384 if (udev->parent_hub == NULL) { 1385 /* root HUB is special */ 1386 err = 0; 1387 } else { 1388 /* normal HUB */ 1389 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1390 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); 1391 } 1392 if (err) { 1393 DPRINTFN(0, "cannot setup interrupt transfer, " 1394 "errstr=%s\n", usbd_errstr(err)); 1395 goto error; 1396 } 1397 /* wait with power off for a while */ 1398 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1399 1400 #if USB_HAVE_DISABLE_ENUM 1401 /* Add device sysctls */ 1402 1403 sysctl_ctx = device_get_sysctl_ctx(dev); 1404 sysctl_tree = device_get_sysctl_tree(dev); 1405 1406 if (sysctl_ctx != NULL && sysctl_tree != NULL) { 1407 (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1408 OID_AUTO, "disable_enumeration", CTLFLAG_RWTUN, 1409 &sc->sc_disable_enumeration, 0, 1410 "Set to disable enumeration on this USB HUB."); 1411 1412 (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1413 OID_AUTO, "disable_port_power", CTLFLAG_RWTUN, 1414 &sc->sc_disable_port_power, 0, 1415 "Set to disable USB port power on this USB HUB."); 1416 } 1417 #endif 1418 /* 1419 * To have the best chance of success we do things in the exact same 1420 * order as Windoze98. This should not be necessary, but some 1421 * devices do not follow the USB specs to the letter. 1422 * 1423 * These are the events on the bus when a hub is attached: 1424 * Get device and config descriptors (see attach code) 1425 * Get hub descriptor (see above) 1426 * For all ports 1427 * turn on power 1428 * wait for power to become stable 1429 * (all below happens in explore code) 1430 * For all ports 1431 * clear C_PORT_CONNECTION 1432 * For all ports 1433 * get port status 1434 * if device connected 1435 * wait 100 ms 1436 * turn on reset 1437 * wait 1438 * clear C_PORT_RESET 1439 * get port status 1440 * proceed with device attachment 1441 */ 1442 1443 /* XXX should check for none, individual, or ganged power? */ 1444 1445 removable = 0; 1446 1447 for (x = 0; x != nports; x++) { 1448 /* set up data structures */ 1449 struct usb_port *up = hub->ports + x; 1450 1451 up->device_index = 0; 1452 up->restartcnt = 0; 1453 portno = x + 1; 1454 1455 /* check if port is removable */ 1456 switch (udev->speed) { 1457 case USB_SPEED_LOW: 1458 case USB_SPEED_FULL: 1459 case USB_SPEED_HIGH: 1460 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1461 removable++; 1462 break; 1463 case USB_SPEED_SUPER: 1464 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1465 removable++; 1466 break; 1467 default: 1468 DPRINTF("Assuming removable port\n"); 1469 removable++; 1470 break; 1471 } 1472 if (err == 0) { 1473 #if USB_HAVE_DISABLE_ENUM 1474 /* check if we should disable USB port power or not */ 1475 if (usb_disable_port_power != 0 || 1476 sc->sc_disable_port_power != 0) { 1477 /* turn the power off */ 1478 DPRINTFN(2, "Turning port %d power off\n", portno); 1479 err = usbd_req_clear_port_feature(udev, NULL, 1480 portno, UHF_PORT_POWER); 1481 } else { 1482 #endif 1483 /* turn the power on */ 1484 DPRINTFN(2, "Turning port %d power on\n", portno); 1485 err = usbd_req_set_port_feature(udev, NULL, 1486 portno, UHF_PORT_POWER); 1487 #if USB_HAVE_DISABLE_ENUM 1488 } 1489 #endif 1490 } 1491 if (err != 0) { 1492 DPRINTFN(0, "port %d power on or off failed, %s\n", 1493 portno, usbd_errstr(err)); 1494 } 1495 DPRINTF("turn on port %d power\n", 1496 portno); 1497 1498 /* wait for stable power */ 1499 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1500 } 1501 1502 device_printf(dev, "%d port%s with %d " 1503 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1504 removable, udev->flags.self_powered ? "self" : "bus"); 1505 1506 /* Start the interrupt endpoint, if any */ 1507 1508 USB_MTX_LOCK(&sc->sc_mtx); 1509 usbd_transfer_start(sc->sc_xfer[UHUB_INTR_TRANSFER]); 1510 USB_MTX_UNLOCK(&sc->sc_mtx); 1511 1512 /* Enable automatic power save on all USB HUBs */ 1513 1514 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1515 1516 return (0); 1517 1518 error: 1519 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1520 1521 #if (USB_HAVE_FIXED_PORT == 0) 1522 free(udev->hub, M_USBDEV); 1523 #endif 1524 udev->hub = NULL; 1525 1526 mtx_destroy(&sc->sc_mtx); 1527 1528 return (ENXIO); 1529 } 1530 1531 /* 1532 * Called from process context when the hub is gone. 1533 * Detach all devices on active ports. 1534 */ 1535 int 1536 uhub_detach(device_t dev) 1537 { 1538 struct uhub_softc *sc = device_get_softc(dev); 1539 struct usb_hub *hub = sc->sc_udev->hub; 1540 struct usb_bus *bus = sc->sc_udev->bus; 1541 struct usb_device *child; 1542 uint8_t x; 1543 1544 if (hub == NULL) /* must be partially working */ 1545 return (0); 1546 1547 /* Make sure interrupt transfer is gone. */ 1548 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1549 1550 /* Detach all ports */ 1551 for (x = 0; x != hub->nports; x++) { 1552 child = usb_bus_port_get_device(bus, hub->ports + x); 1553 1554 if (child == NULL) { 1555 continue; 1556 } 1557 1558 /* 1559 * Free USB device and all subdevices, if any. 1560 */ 1561 usb_free_device(child, 0); 1562 } 1563 1564 #if USB_HAVE_TT_SUPPORT 1565 /* Make sure our TT messages are not queued anywhere */ 1566 USB_BUS_LOCK(bus); 1567 usb_proc_mwait(USB_BUS_TT_PROC(bus), 1568 &hub->tt_msg[0], &hub->tt_msg[1]); 1569 USB_BUS_UNLOCK(bus); 1570 #endif 1571 1572 #if (USB_HAVE_FIXED_PORT == 0) 1573 free(hub, M_USBDEV); 1574 #endif 1575 sc->sc_udev->hub = NULL; 1576 1577 mtx_destroy(&sc->sc_mtx); 1578 1579 return (0); 1580 } 1581 1582 static int 1583 uhub_suspend(device_t dev) 1584 { 1585 DPRINTF("\n"); 1586 /* Sub-devices are not suspended here! */ 1587 return (0); 1588 } 1589 1590 static int 1591 uhub_resume(device_t dev) 1592 { 1593 DPRINTF("\n"); 1594 /* Sub-devices are not resumed here! */ 1595 return (0); 1596 } 1597 1598 static void 1599 uhub_driver_added(device_t dev, driver_t *driver) 1600 { 1601 usb_needs_explore_all(); 1602 } 1603 1604 void 1605 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1606 struct hub_result *res) 1607 { 1608 struct usb_interface *iface; 1609 struct usb_device *udev; 1610 uint8_t nports; 1611 uint8_t x; 1612 uint8_t i; 1613 1614 nports = hub->nports; 1615 for (x = 0; x != nports; x++) { 1616 udev = usb_bus_port_get_device(hub->hubudev->bus, 1617 hub->ports + x); 1618 if (!udev) { 1619 continue; 1620 } 1621 for (i = 0; i != USB_IFACE_MAX; i++) { 1622 iface = usbd_get_iface(udev, i); 1623 if (iface && 1624 (iface->subdev == child)) { 1625 res->iface_index = i; 1626 res->udev = udev; 1627 res->portno = x + 1; 1628 return; 1629 } 1630 } 1631 } 1632 res->iface_index = 0; 1633 res->udev = NULL; 1634 res->portno = 0; 1635 } 1636 1637 int 1638 uhub_child_location(device_t parent, device_t child, struct sbuf *sb) 1639 { 1640 struct uhub_softc *sc; 1641 struct usb_hub *hub; 1642 struct hub_result res; 1643 1644 if (!device_is_attached(parent)) 1645 return (0); 1646 1647 sc = device_get_softc(parent); 1648 hub = sc->sc_udev->hub; 1649 1650 mtx_lock(&Giant); 1651 uhub_find_iface_index(hub, child, &res); 1652 if (!res.udev) { 1653 DPRINTF("device not on hub\n"); 1654 goto done; 1655 } 1656 sbuf_printf(sb, "bus=%u hubaddr=%u port=%u devaddr=%u" 1657 " interface=%u" 1658 #if USB_HAVE_UGEN 1659 " ugen=%s" 1660 #endif 1661 , device_get_unit(res.udev->bus->bdev) 1662 , (res.udev->parent_hub != NULL) ? 1663 res.udev->parent_hub->device_index : 0 1664 , res.portno, res.udev->device_index, res.iface_index 1665 #if USB_HAVE_UGEN 1666 , res.udev->ugen_name 1667 #endif 1668 ); 1669 done: 1670 mtx_unlock(&Giant); 1671 1672 return (0); 1673 } 1674 1675 int 1676 uhub_get_device_path(device_t bus, device_t child, const char *locator, 1677 struct sbuf *sb) 1678 { 1679 struct uhub_softc *sc; 1680 struct usb_hub *hub; 1681 struct hub_result res; 1682 int rv; 1683 1684 if (strcmp(locator, BUS_LOCATOR_UEFI) == 0) { 1685 rv = bus_generic_get_device_path(device_get_parent(bus), bus, locator, sb); 1686 1687 sc = device_get_softc(bus); 1688 hub = sc->sc_udev->hub; 1689 1690 mtx_lock(&Giant); 1691 uhub_find_iface_index(hub, child, &res); 1692 if (!res.udev) { 1693 printf("device not on hub\n"); 1694 goto done; 1695 } 1696 sbuf_printf(sb, "/USB(0x%x,0x%x)", res.portno - 1, res.iface_index); 1697 done: 1698 mtx_unlock(&Giant); 1699 return (0); 1700 } 1701 1702 /* For the rest, punt to the default handler */ 1703 return (bus_generic_get_device_path(bus, child, locator, sb)); 1704 } 1705 1706 static int 1707 uhub_child_pnpinfo(device_t parent, device_t child, struct sbuf*sb) 1708 { 1709 struct uhub_softc *sc; 1710 struct usb_hub *hub; 1711 struct usb_interface *iface; 1712 struct hub_result res; 1713 uint8_t do_unlock; 1714 1715 if (!device_is_attached(parent)) 1716 return (0); 1717 1718 sc = device_get_softc(parent); 1719 hub = sc->sc_udev->hub; 1720 1721 mtx_lock(&Giant); 1722 uhub_find_iface_index(hub, child, &res); 1723 if (!res.udev) { 1724 DPRINTF("device not on hub\n"); 1725 goto done; 1726 } 1727 iface = usbd_get_iface(res.udev, res.iface_index); 1728 if (iface && iface->idesc) { 1729 /* Make sure device information is not changed during the print. */ 1730 do_unlock = usbd_ctrl_lock(res.udev); 1731 1732 sbuf_printf(sb, "vendor=0x%04x product=0x%04x " 1733 "devclass=0x%02x devsubclass=0x%02x " 1734 "devproto=0x%02x " 1735 "sernum=\"%s\" " 1736 "release=0x%04x " 1737 "mode=%s " 1738 "intclass=0x%02x intsubclass=0x%02x " 1739 "intprotocol=0x%02x" "%s%s", 1740 UGETW(res.udev->ddesc.idVendor), 1741 UGETW(res.udev->ddesc.idProduct), 1742 res.udev->ddesc.bDeviceClass, 1743 res.udev->ddesc.bDeviceSubClass, 1744 res.udev->ddesc.bDeviceProtocol, 1745 usb_get_serial(res.udev), 1746 UGETW(res.udev->ddesc.bcdDevice), 1747 (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 1748 iface->idesc->bInterfaceClass, 1749 iface->idesc->bInterfaceSubClass, 1750 iface->idesc->bInterfaceProtocol, 1751 iface->pnpinfo ? " " : "", 1752 iface->pnpinfo ? iface->pnpinfo : ""); 1753 1754 if (do_unlock) 1755 usbd_ctrl_unlock(res.udev); 1756 } 1757 done: 1758 mtx_unlock(&Giant); 1759 1760 return (0); 1761 } 1762 1763 /* 1764 * The USB Transaction Translator: 1765 * =============================== 1766 * 1767 * When doing LOW- and FULL-speed USB transfers across a HIGH-speed 1768 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1769 * USB transfers. To utilize bandwidth dynamically the "scatter and 1770 * gather" principle must be applied. This means that bandwidth must 1771 * be divided into equal parts of bandwidth. With regard to USB all 1772 * data is transferred in smaller packets with length 1773 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1774 * not a constant! 1775 * 1776 * The bandwidth scheduler which I have implemented will simply pack 1777 * the USB transfers back to back until there is no more space in the 1778 * schedule. Out of the 8 microframes which the USB 2.0 standard 1779 * provides, only 6 are available for non-HIGH-speed devices. I have 1780 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1781 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1782 * this division, it is very difficult to allocate and free bandwidth 1783 * dynamically. 1784 * 1785 * NOTE about the Transaction Translator in USB HUBs: 1786 * 1787 * USB HUBs have a very simple Transaction Translator, that will 1788 * simply pipeline all the SPLIT transactions. That means that the 1789 * transactions will be executed in the order they are queued! 1790 * 1791 */ 1792 1793 /*------------------------------------------------------------------------* 1794 * usb_intr_find_best_slot 1795 * 1796 * Return value: 1797 * The best Transaction Translation slot for an interrupt endpoint. 1798 *------------------------------------------------------------------------*/ 1799 static uint8_t 1800 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1801 uint8_t end, uint8_t mask) 1802 { 1803 usb_size_t min = (usb_size_t)-1; 1804 usb_size_t sum; 1805 uint8_t x; 1806 uint8_t y; 1807 uint8_t z; 1808 1809 y = 0; 1810 1811 /* find the last slot with lesser used bandwidth */ 1812 1813 for (x = start; x < end; x++) { 1814 sum = 0; 1815 1816 /* compute sum of bandwidth */ 1817 for (z = x; z < end; z++) { 1818 if (mask & (1U << (z - x))) 1819 sum += ptr[z]; 1820 } 1821 1822 /* check if the current multi-slot is more optimal */ 1823 if (min >= sum) { 1824 min = sum; 1825 y = x; 1826 } 1827 1828 /* check if the mask is about to be shifted out */ 1829 if (mask & (1U << (end - 1 - x))) 1830 break; 1831 } 1832 return (y); 1833 } 1834 1835 /*------------------------------------------------------------------------* 1836 * usb_hs_bandwidth_adjust 1837 * 1838 * This function will update the bandwidth usage for the microframe 1839 * having index "slot" by "len" bytes. "len" can be negative. If the 1840 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1841 * the "slot" argument will be replaced by the slot having least used 1842 * bandwidth. The "mask" argument is used for multi-slot allocations. 1843 * 1844 * Returns: 1845 * The slot in which the bandwidth update was done: 0..7 1846 *------------------------------------------------------------------------*/ 1847 static uint8_t 1848 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1849 uint8_t slot, uint8_t mask) 1850 { 1851 struct usb_bus *bus = udev->bus; 1852 struct usb_hub *hub; 1853 enum usb_dev_speed speed; 1854 uint8_t x; 1855 1856 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1857 1858 speed = usbd_get_speed(udev); 1859 1860 switch (speed) { 1861 case USB_SPEED_LOW: 1862 case USB_SPEED_FULL: 1863 if (speed == USB_SPEED_LOW) { 1864 len *= 8; 1865 } 1866 /* 1867 * The Host Controller Driver should have 1868 * performed checks so that the lookup 1869 * below does not result in a NULL pointer 1870 * access. 1871 */ 1872 1873 hub = udev->parent_hs_hub->hub; 1874 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1875 slot = usb_intr_find_best_slot(hub->uframe_usage, 1876 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1877 } 1878 for (x = slot; x < 8; x++) { 1879 if (mask & (1U << (x - slot))) { 1880 hub->uframe_usage[x] += len; 1881 bus->uframe_usage[x] += len; 1882 } 1883 } 1884 break; 1885 default: 1886 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1887 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1888 USB_HS_MICRO_FRAMES_MAX, mask); 1889 } 1890 for (x = slot; x < 8; x++) { 1891 if (mask & (1U << (x - slot))) { 1892 bus->uframe_usage[x] += len; 1893 } 1894 } 1895 break; 1896 } 1897 return (slot); 1898 } 1899 1900 /*------------------------------------------------------------------------* 1901 * usb_hs_bandwidth_alloc 1902 * 1903 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1904 *------------------------------------------------------------------------*/ 1905 void 1906 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1907 { 1908 struct usb_device *udev; 1909 uint8_t slot; 1910 uint8_t mask; 1911 uint8_t speed; 1912 1913 udev = xfer->xroot->udev; 1914 1915 if (udev->flags.usb_mode != USB_MODE_HOST) 1916 return; /* not supported */ 1917 1918 xfer->endpoint->refcount_bw++; 1919 if (xfer->endpoint->refcount_bw != 1) 1920 return; /* already allocated */ 1921 1922 speed = usbd_get_speed(udev); 1923 1924 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1925 case UE_INTERRUPT: 1926 /* allocate a microframe slot */ 1927 1928 mask = 0x01; 1929 slot = usb_hs_bandwidth_adjust(udev, 1930 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1931 1932 xfer->endpoint->usb_uframe = slot; 1933 xfer->endpoint->usb_smask = mask << slot; 1934 1935 if ((speed != USB_SPEED_FULL) && 1936 (speed != USB_SPEED_LOW)) { 1937 xfer->endpoint->usb_cmask = 0x00 ; 1938 } else { 1939 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1940 } 1941 break; 1942 1943 case UE_ISOCHRONOUS: 1944 switch (usbd_xfer_get_fps_shift(xfer)) { 1945 case 0: 1946 mask = 0xFF; 1947 break; 1948 case 1: 1949 mask = 0x55; 1950 break; 1951 case 2: 1952 mask = 0x11; 1953 break; 1954 default: 1955 mask = 0x01; 1956 break; 1957 } 1958 1959 /* allocate a microframe multi-slot */ 1960 1961 slot = usb_hs_bandwidth_adjust(udev, 1962 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1963 1964 xfer->endpoint->usb_uframe = slot; 1965 xfer->endpoint->usb_cmask = 0; 1966 xfer->endpoint->usb_smask = mask << slot; 1967 break; 1968 1969 default: 1970 xfer->endpoint->usb_uframe = 0; 1971 xfer->endpoint->usb_cmask = 0; 1972 xfer->endpoint->usb_smask = 0; 1973 break; 1974 } 1975 1976 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1977 xfer->endpoint->usb_uframe, 1978 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1979 } 1980 1981 /*------------------------------------------------------------------------* 1982 * usb_hs_bandwidth_free 1983 * 1984 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1985 *------------------------------------------------------------------------*/ 1986 void 1987 usb_hs_bandwidth_free(struct usb_xfer *xfer) 1988 { 1989 struct usb_device *udev; 1990 uint8_t slot; 1991 uint8_t mask; 1992 1993 udev = xfer->xroot->udev; 1994 1995 if (udev->flags.usb_mode != USB_MODE_HOST) 1996 return; /* not supported */ 1997 1998 xfer->endpoint->refcount_bw--; 1999 if (xfer->endpoint->refcount_bw != 0) 2000 return; /* still allocated */ 2001 2002 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 2003 case UE_INTERRUPT: 2004 case UE_ISOCHRONOUS: 2005 2006 slot = xfer->endpoint->usb_uframe; 2007 mask = xfer->endpoint->usb_smask; 2008 2009 /* free microframe slot(s): */ 2010 usb_hs_bandwidth_adjust(udev, 2011 -xfer->max_frame_size, slot, mask >> slot); 2012 2013 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 2014 slot, mask >> slot); 2015 2016 xfer->endpoint->usb_uframe = 0; 2017 xfer->endpoint->usb_cmask = 0; 2018 xfer->endpoint->usb_smask = 0; 2019 break; 2020 2021 default: 2022 break; 2023 } 2024 } 2025 2026 /*------------------------------------------------------------------------* 2027 * usb_isoc_time_expand 2028 * 2029 * This function will expand the time counter from 7-bit to 16-bit. 2030 * 2031 * Returns: 2032 * 16-bit isochronous time counter. 2033 *------------------------------------------------------------------------*/ 2034 uint16_t 2035 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 2036 { 2037 uint16_t rem; 2038 2039 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 2040 2041 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 2042 2043 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 2044 2045 if (isoc_time_curr < rem) { 2046 /* the time counter wrapped around */ 2047 bus->isoc_time_last += USB_ISOC_TIME_MAX; 2048 } 2049 /* update the remainder */ 2050 2051 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 2052 bus->isoc_time_last |= isoc_time_curr; 2053 2054 return (bus->isoc_time_last); 2055 } 2056 2057 /*------------------------------------------------------------------------* 2058 * usbd_fs_isoc_schedule_alloc_slot 2059 * 2060 * This function will allocate bandwidth for an isochronous FULL speed 2061 * transaction in the FULL speed schedule. 2062 * 2063 * Returns: 2064 * <8: Success 2065 * Else: Error 2066 *------------------------------------------------------------------------*/ 2067 #if USB_HAVE_TT_SUPPORT 2068 uint8_t 2069 usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time) 2070 { 2071 struct usb_xfer *xfer; 2072 struct usb_xfer *pipe_xfer; 2073 struct usb_bus *bus; 2074 usb_frlength_t len; 2075 usb_frlength_t data_len; 2076 uint16_t delta; 2077 uint16_t slot; 2078 uint8_t retval; 2079 2080 data_len = 0; 2081 slot = 0; 2082 2083 bus = isoc_xfer->xroot->bus; 2084 2085 TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) { 2086 /* skip self, if any */ 2087 2088 if (xfer == isoc_xfer) 2089 continue; 2090 2091 /* check if this USB transfer is going through the same TT */ 2092 2093 if (xfer->xroot->udev->parent_hs_hub != 2094 isoc_xfer->xroot->udev->parent_hs_hub) { 2095 continue; 2096 } 2097 if ((isoc_xfer->xroot->udev->parent_hs_hub-> 2098 ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) && 2099 (xfer->xroot->udev->hs_port_no != 2100 isoc_xfer->xroot->udev->hs_port_no)) { 2101 continue; 2102 } 2103 if (xfer->endpoint->methods != isoc_xfer->endpoint->methods) 2104 continue; 2105 2106 /* check if isoc_time is part of this transfer */ 2107 2108 delta = xfer->isoc_time_complete - isoc_time; 2109 if (delta > 0 && delta <= xfer->nframes) { 2110 delta = xfer->nframes - delta; 2111 2112 len = xfer->frlengths[delta]; 2113 len += 8; 2114 len *= 7; 2115 len /= 6; 2116 2117 data_len += len; 2118 } 2119 2120 /* 2121 * Check double buffered transfers. Only stream ID 2122 * equal to zero is valid here! 2123 */ 2124 TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q[0].head, 2125 wait_entry) { 2126 /* skip self, if any */ 2127 2128 if (pipe_xfer == isoc_xfer) 2129 continue; 2130 2131 /* check if isoc_time is part of this transfer */ 2132 2133 delta = pipe_xfer->isoc_time_complete - isoc_time; 2134 if (delta > 0 && delta <= pipe_xfer->nframes) { 2135 delta = pipe_xfer->nframes - delta; 2136 2137 len = pipe_xfer->frlengths[delta]; 2138 len += 8; 2139 len *= 7; 2140 len /= 6; 2141 2142 data_len += len; 2143 } 2144 } 2145 } 2146 2147 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 2148 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 2149 slot++; 2150 } 2151 2152 /* check for overflow */ 2153 2154 if (slot >= USB_FS_ISOC_UFRAME_MAX) 2155 return (255); 2156 2157 retval = slot; 2158 2159 delta = isoc_xfer->isoc_time_complete - isoc_time; 2160 if (delta > 0 && delta <= isoc_xfer->nframes) { 2161 delta = isoc_xfer->nframes - delta; 2162 2163 len = isoc_xfer->frlengths[delta]; 2164 len += 8; 2165 len *= 7; 2166 len /= 6; 2167 2168 data_len += len; 2169 } 2170 2171 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 2172 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 2173 slot++; 2174 } 2175 2176 /* check for overflow */ 2177 2178 if (slot >= USB_FS_ISOC_UFRAME_MAX) 2179 return (255); 2180 2181 return (retval); 2182 } 2183 #endif 2184 2185 /*------------------------------------------------------------------------* 2186 * usb_bus_port_get_device 2187 * 2188 * This function is NULL safe. 2189 *------------------------------------------------------------------------*/ 2190 struct usb_device * 2191 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 2192 { 2193 if ((bus == NULL) || (up == NULL)) { 2194 /* be NULL safe */ 2195 return (NULL); 2196 } 2197 if (up->device_index == 0) { 2198 /* nothing to do */ 2199 return (NULL); 2200 } 2201 return (bus->devices[up->device_index]); 2202 } 2203 2204 /*------------------------------------------------------------------------* 2205 * usb_bus_port_set_device 2206 * 2207 * This function is NULL safe. 2208 *------------------------------------------------------------------------*/ 2209 void 2210 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 2211 struct usb_device *udev, uint8_t device_index) 2212 { 2213 if (bus == NULL) { 2214 /* be NULL safe */ 2215 return; 2216 } 2217 /* 2218 * There is only one case where we don't 2219 * have an USB port, and that is the Root Hub! 2220 */ 2221 if (up) { 2222 if (udev) { 2223 up->device_index = device_index; 2224 } else { 2225 device_index = up->device_index; 2226 up->device_index = 0; 2227 } 2228 } 2229 /* 2230 * Make relationships to our new device 2231 */ 2232 if (device_index != 0) { 2233 #if USB_HAVE_UGEN 2234 mtx_lock(&usb_ref_lock); 2235 #endif 2236 bus->devices[device_index] = udev; 2237 #if USB_HAVE_UGEN 2238 mtx_unlock(&usb_ref_lock); 2239 #endif 2240 } 2241 /* 2242 * Debug print 2243 */ 2244 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 2245 } 2246 2247 /*------------------------------------------------------------------------* 2248 * usb_needs_explore 2249 * 2250 * This functions is called when the USB event thread needs to run. 2251 *------------------------------------------------------------------------*/ 2252 void 2253 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 2254 { 2255 uint8_t do_unlock; 2256 2257 DPRINTF("\n"); 2258 2259 if (cold != 0) { 2260 DPRINTF("Cold\n"); 2261 return; 2262 } 2263 2264 if (bus == NULL) { 2265 DPRINTF("No bus pointer!\n"); 2266 return; 2267 } 2268 if ((bus->devices == NULL) || 2269 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 2270 DPRINTF("No root HUB\n"); 2271 return; 2272 } 2273 if (mtx_owned(&bus->bus_mtx)) { 2274 do_unlock = 0; 2275 } else { 2276 USB_BUS_LOCK(bus); 2277 do_unlock = 1; 2278 } 2279 if (do_probe) { 2280 bus->do_probe = 1; 2281 } 2282 if (usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 2283 &bus->explore_msg[0], &bus->explore_msg[1])) { 2284 /* ignore */ 2285 } 2286 if (do_unlock) { 2287 USB_BUS_UNLOCK(bus); 2288 } 2289 } 2290 2291 /*------------------------------------------------------------------------* 2292 * usb_needs_explore_all 2293 * 2294 * This function is called whenever a new driver is loaded and will 2295 * cause that all USB buses are re-explored. 2296 *------------------------------------------------------------------------*/ 2297 void 2298 usb_needs_explore_all(void) 2299 { 2300 struct usb_bus *bus; 2301 devclass_t dc; 2302 device_t dev; 2303 int max; 2304 2305 DPRINTFN(3, "\n"); 2306 2307 dc = usb_devclass_ptr; 2308 if (dc == NULL) { 2309 DPRINTFN(0, "no devclass\n"); 2310 return; 2311 } 2312 /* 2313 * Explore all USB buses in parallel. 2314 */ 2315 max = devclass_get_maxunit(dc); 2316 while (max >= 0) { 2317 dev = devclass_get_device(dc, max); 2318 if (dev) { 2319 bus = device_get_softc(dev); 2320 if (bus) { 2321 usb_needs_explore(bus, 1); 2322 } 2323 } 2324 max--; 2325 } 2326 } 2327 2328 /*------------------------------------------------------------------------* 2329 * usb_needs_explore_init 2330 * 2331 * This function will ensure that the USB controllers are not enumerated 2332 * until the "cold" variable is cleared. 2333 *------------------------------------------------------------------------*/ 2334 static void 2335 usb_needs_explore_init(void *arg) 2336 { 2337 /* 2338 * The cold variable should be cleared prior to this function 2339 * being called: 2340 */ 2341 if (cold == 0) 2342 usb_needs_explore_all(); 2343 else 2344 DPRINTFN(-1, "Cold variable is still set!\n"); 2345 } 2346 SYSINIT(usb_needs_explore_init, SI_SUB_KICK_SCHEDULER, SI_ORDER_SECOND, usb_needs_explore_init, NULL); 2347 2348 /*------------------------------------------------------------------------* 2349 * usb_bus_power_update 2350 * 2351 * This function will ensure that all USB devices on the given bus are 2352 * properly suspended or resumed according to the device transfer 2353 * state. 2354 *------------------------------------------------------------------------*/ 2355 #if USB_HAVE_POWERD 2356 void 2357 usb_bus_power_update(struct usb_bus *bus) 2358 { 2359 usb_needs_explore(bus, 0 /* no probe */ ); 2360 } 2361 #endif 2362 2363 /*------------------------------------------------------------------------* 2364 * usbd_transfer_power_ref 2365 * 2366 * This function will modify the power save reference counts and 2367 * wakeup the USB device associated with the given USB transfer, if 2368 * needed. 2369 *------------------------------------------------------------------------*/ 2370 #if USB_HAVE_POWERD 2371 void 2372 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 2373 { 2374 static const usb_power_mask_t power_mask[4] = { 2375 [UE_CONTROL] = USB_HW_POWER_CONTROL, 2376 [UE_BULK] = USB_HW_POWER_BULK, 2377 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 2378 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 2379 }; 2380 struct usb_device *udev; 2381 uint8_t needs_explore; 2382 uint8_t needs_hw_power; 2383 uint8_t xfer_type; 2384 2385 udev = xfer->xroot->udev; 2386 2387 if (udev->device_index == USB_ROOT_HUB_ADDR) { 2388 /* no power save for root HUB */ 2389 return; 2390 } 2391 USB_BUS_LOCK(udev->bus); 2392 2393 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 2394 2395 udev->pwr_save.last_xfer_time = ticks; 2396 udev->pwr_save.type_refs[xfer_type] += val; 2397 2398 if (xfer->flags_int.control_xfr) { 2399 udev->pwr_save.read_refs += val; 2400 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 2401 /* 2402 * It is not allowed to suspend during a 2403 * control transfer: 2404 */ 2405 udev->pwr_save.write_refs += val; 2406 } 2407 } else if (USB_GET_DATA_ISREAD(xfer)) { 2408 udev->pwr_save.read_refs += val; 2409 } else { 2410 udev->pwr_save.write_refs += val; 2411 } 2412 2413 if (val > 0) { 2414 if (udev->flags.self_suspended) 2415 needs_explore = usb_peer_should_wakeup(udev); 2416 else 2417 needs_explore = 0; 2418 2419 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2420 DPRINTF("Adding type %u to power state\n", xfer_type); 2421 udev->bus->hw_power_state |= power_mask[xfer_type]; 2422 needs_hw_power = 1; 2423 } else { 2424 needs_hw_power = 0; 2425 } 2426 } else { 2427 needs_explore = 0; 2428 needs_hw_power = 0; 2429 } 2430 2431 USB_BUS_UNLOCK(udev->bus); 2432 2433 if (needs_explore) { 2434 DPRINTF("update\n"); 2435 usb_bus_power_update(udev->bus); 2436 } else if (needs_hw_power) { 2437 DPRINTF("needs power\n"); 2438 if (udev->bus->methods->set_hw_power != NULL) { 2439 (udev->bus->methods->set_hw_power) (udev->bus); 2440 } 2441 } 2442 } 2443 #endif 2444 2445 /*------------------------------------------------------------------------* 2446 * usb_peer_should_wakeup 2447 * 2448 * This function returns non-zero if the current device should wake up. 2449 *------------------------------------------------------------------------*/ 2450 static uint8_t 2451 usb_peer_should_wakeup(struct usb_device *udev) 2452 { 2453 return (((udev->power_mode == USB_POWER_MODE_ON) && 2454 (udev->flags.usb_mode == USB_MODE_HOST)) || 2455 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2456 (udev->re_enumerate_wait != USB_RE_ENUM_DONE) || 2457 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2458 (udev->pwr_save.write_refs != 0) || 2459 ((udev->pwr_save.read_refs != 0) && 2460 (udev->flags.usb_mode == USB_MODE_HOST) && 2461 (usb_peer_can_wakeup(udev) == 0))); 2462 } 2463 2464 /*------------------------------------------------------------------------* 2465 * usb_bus_powerd 2466 * 2467 * This function implements the USB power daemon and is called 2468 * regularly from the USB explore thread. 2469 *------------------------------------------------------------------------*/ 2470 #if USB_HAVE_POWERD 2471 void 2472 usb_bus_powerd(struct usb_bus *bus) 2473 { 2474 struct usb_device *udev; 2475 usb_ticks_t temp; 2476 usb_ticks_t limit; 2477 usb_ticks_t mintime; 2478 usb_size_t type_refs[5]; 2479 uint8_t x; 2480 2481 limit = usb_power_timeout; 2482 if (limit == 0) 2483 limit = hz; 2484 else if (limit > 255) 2485 limit = 255 * hz; 2486 else 2487 limit = limit * hz; 2488 2489 DPRINTF("bus=%p\n", bus); 2490 2491 USB_BUS_LOCK(bus); 2492 2493 /* 2494 * The root HUB device is never suspended 2495 * and we simply skip it. 2496 */ 2497 for (x = USB_ROOT_HUB_ADDR + 1; 2498 x != bus->devices_max; x++) { 2499 udev = bus->devices[x]; 2500 if (udev == NULL) 2501 continue; 2502 2503 temp = ticks - udev->pwr_save.last_xfer_time; 2504 2505 if (usb_peer_should_wakeup(udev)) { 2506 /* check if we are suspended */ 2507 if (udev->flags.self_suspended != 0) { 2508 USB_BUS_UNLOCK(bus); 2509 usb_dev_resume_peer(udev); 2510 USB_BUS_LOCK(bus); 2511 } 2512 } else if ((temp >= limit) && 2513 (udev->flags.usb_mode == USB_MODE_HOST) && 2514 (udev->flags.self_suspended == 0)) { 2515 /* try to do suspend */ 2516 2517 USB_BUS_UNLOCK(bus); 2518 usb_dev_suspend_peer(udev); 2519 USB_BUS_LOCK(bus); 2520 } 2521 } 2522 2523 /* reset counters */ 2524 2525 mintime = (usb_ticks_t)-1; 2526 type_refs[0] = 0; 2527 type_refs[1] = 0; 2528 type_refs[2] = 0; 2529 type_refs[3] = 0; 2530 type_refs[4] = 0; 2531 2532 /* Re-loop all the devices to get the actual state */ 2533 2534 for (x = USB_ROOT_HUB_ADDR + 1; 2535 x != bus->devices_max; x++) { 2536 udev = bus->devices[x]; 2537 if (udev == NULL) 2538 continue; 2539 2540 /* we found a non-Root-Hub USB device */ 2541 type_refs[4] += 1; 2542 2543 /* "last_xfer_time" can be updated by a resume */ 2544 temp = ticks - udev->pwr_save.last_xfer_time; 2545 2546 /* 2547 * Compute minimum time since last transfer for the complete 2548 * bus: 2549 */ 2550 if (temp < mintime) 2551 mintime = temp; 2552 2553 if (udev->flags.self_suspended == 0) { 2554 type_refs[0] += udev->pwr_save.type_refs[0]; 2555 type_refs[1] += udev->pwr_save.type_refs[1]; 2556 type_refs[2] += udev->pwr_save.type_refs[2]; 2557 type_refs[3] += udev->pwr_save.type_refs[3]; 2558 } 2559 } 2560 2561 if (mintime >= (usb_ticks_t)(1 * hz)) { 2562 /* recompute power masks */ 2563 DPRINTF("Recomputing power masks\n"); 2564 bus->hw_power_state = 0; 2565 if (type_refs[UE_CONTROL] != 0) 2566 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2567 if (type_refs[UE_BULK] != 0) 2568 bus->hw_power_state |= USB_HW_POWER_BULK; 2569 if (type_refs[UE_INTERRUPT] != 0) 2570 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2571 if (type_refs[UE_ISOCHRONOUS] != 0) 2572 bus->hw_power_state |= USB_HW_POWER_ISOC; 2573 if (type_refs[4] != 0) 2574 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2575 } 2576 USB_BUS_UNLOCK(bus); 2577 2578 if (bus->methods->set_hw_power != NULL) { 2579 /* always update hardware power! */ 2580 (bus->methods->set_hw_power) (bus); 2581 } 2582 return; 2583 } 2584 #endif 2585 2586 static usb_error_t 2587 usbd_device_30_remote_wakeup(struct usb_device *udev, uint8_t bRequest) 2588 { 2589 struct usb_device_request req = {}; 2590 2591 req.bmRequestType = UT_WRITE_INTERFACE; 2592 req.bRequest = bRequest; 2593 USETW(req.wValue, USB_INTERFACE_FUNC_SUSPEND); 2594 USETW(req.wIndex, USB_INTERFACE_FUNC_SUSPEND_LP | 2595 USB_INTERFACE_FUNC_SUSPEND_RW); 2596 2597 return (usbd_do_request(udev, NULL, &req, 0)); 2598 } 2599 2600 static usb_error_t 2601 usbd_clear_dev_wakeup(struct usb_device *udev) 2602 { 2603 usb_error_t err; 2604 2605 if (usb_device_20_compatible(udev)) { 2606 err = usbd_req_clear_device_feature(udev, 2607 NULL, UF_DEVICE_REMOTE_WAKEUP); 2608 } else { 2609 err = usbd_device_30_remote_wakeup(udev, 2610 UR_CLEAR_FEATURE); 2611 } 2612 return (err); 2613 } 2614 2615 static usb_error_t 2616 usbd_set_dev_wakeup(struct usb_device *udev) 2617 { 2618 usb_error_t err; 2619 2620 if (usb_device_20_compatible(udev)) { 2621 err = usbd_req_set_device_feature(udev, 2622 NULL, UF_DEVICE_REMOTE_WAKEUP); 2623 } else { 2624 err = usbd_device_30_remote_wakeup(udev, 2625 UR_SET_FEATURE); 2626 } 2627 return (err); 2628 } 2629 2630 /*------------------------------------------------------------------------* 2631 * usb_dev_resume_peer 2632 * 2633 * This function will resume an USB peer and do the required USB 2634 * signalling to get an USB device out of the suspended state. 2635 *------------------------------------------------------------------------*/ 2636 static void 2637 usb_dev_resume_peer(struct usb_device *udev) 2638 { 2639 struct usb_bus *bus; 2640 int err; 2641 2642 /* be NULL safe */ 2643 if (udev == NULL) 2644 return; 2645 2646 /* check if already resumed */ 2647 if (udev->flags.self_suspended == 0) 2648 return; 2649 2650 /* we need a parent HUB to do resume */ 2651 if (udev->parent_hub == NULL) 2652 return; 2653 2654 DPRINTF("udev=%p\n", udev); 2655 2656 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2657 (udev->flags.remote_wakeup == 0)) { 2658 /* 2659 * If the host did not set the remote wakeup feature, we can 2660 * not wake it up either! 2661 */ 2662 DPRINTF("remote wakeup is not set!\n"); 2663 return; 2664 } 2665 /* get bus pointer */ 2666 bus = udev->bus; 2667 2668 /* resume parent hub first */ 2669 usb_dev_resume_peer(udev->parent_hub); 2670 2671 /* reduce chance of instant resume failure by waiting a little bit */ 2672 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2673 2674 if (usb_device_20_compatible(udev)) { 2675 /* resume current port (Valid in Host and Device Mode) */ 2676 err = usbd_req_clear_port_feature(udev->parent_hub, 2677 NULL, udev->port_no, UHF_PORT_SUSPEND); 2678 } else { 2679 /* resume current port (Valid in Host and Device Mode) */ 2680 err = usbd_req_set_port_link_state(udev->parent_hub, 2681 NULL, udev->port_no, UPS_PORT_LS_U0); 2682 } 2683 2684 if (err != 0) { 2685 DPRINTFN(0, "Resuming port failed: %s (ignored)\n", 2686 usbd_errstr(err)); 2687 } 2688 2689 /* resume settle time */ 2690 usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); 2691 2692 if (bus->methods->device_resume != NULL) { 2693 /* resume USB device on the USB controller */ 2694 (bus->methods->device_resume) (udev); 2695 } 2696 USB_BUS_LOCK(bus); 2697 /* set that this device is now resumed */ 2698 udev->flags.self_suspended = 0; 2699 #if USB_HAVE_POWERD 2700 /* make sure that we don't go into suspend right away */ 2701 udev->pwr_save.last_xfer_time = ticks; 2702 2703 /* make sure the needed power masks are on */ 2704 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2705 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2706 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2707 bus->hw_power_state |= USB_HW_POWER_BULK; 2708 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2709 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2710 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2711 bus->hw_power_state |= USB_HW_POWER_ISOC; 2712 #endif 2713 USB_BUS_UNLOCK(bus); 2714 2715 if (bus->methods->set_hw_power != NULL) { 2716 /* always update hardware power! */ 2717 (bus->methods->set_hw_power) (bus); 2718 } 2719 2720 usbd_sr_lock(udev); 2721 2722 /* notify all sub-devices about resume */ 2723 err = usb_suspend_resume(udev, 0); 2724 2725 usbd_sr_unlock(udev); 2726 2727 /* check if peer has wakeup capability */ 2728 if (usb_peer_can_wakeup(udev)) { 2729 /* clear remote wakeup */ 2730 err = usbd_clear_dev_wakeup(udev); 2731 if (err) { 2732 DPRINTFN(0, "Clearing device " 2733 "remote wakeup failed: %s\n", 2734 usbd_errstr(err)); 2735 } 2736 } 2737 } 2738 2739 /*------------------------------------------------------------------------* 2740 * usb_dev_suspend_peer 2741 * 2742 * This function will suspend an USB peer and do the required USB 2743 * signalling to get an USB device into the suspended state. 2744 *------------------------------------------------------------------------*/ 2745 static void 2746 usb_dev_suspend_peer(struct usb_device *udev) 2747 { 2748 struct usb_device *child; 2749 int err; 2750 uint8_t x; 2751 uint8_t nports; 2752 2753 repeat: 2754 /* be NULL safe */ 2755 if (udev == NULL) 2756 return; 2757 2758 /* check if already suspended */ 2759 if (udev->flags.self_suspended) 2760 return; 2761 2762 /* we need a parent HUB to do suspend */ 2763 if (udev->parent_hub == NULL) 2764 return; 2765 2766 DPRINTF("udev=%p\n", udev); 2767 2768 /* check if the current device is a HUB */ 2769 if (udev->hub != NULL) { 2770 nports = udev->hub->nports; 2771 2772 /* check if all devices on the HUB are suspended */ 2773 for (x = 0; x != nports; x++) { 2774 child = usb_bus_port_get_device(udev->bus, 2775 udev->hub->ports + x); 2776 2777 if (child == NULL) 2778 continue; 2779 2780 if (child->flags.self_suspended) 2781 continue; 2782 2783 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2784 return; 2785 } 2786 } 2787 2788 if (usb_peer_can_wakeup(udev)) { 2789 /* 2790 * This request needs to be done before we set 2791 * "udev->flags.self_suspended": 2792 */ 2793 2794 /* allow device to do remote wakeup */ 2795 err = usbd_set_dev_wakeup(udev); 2796 if (err) { 2797 DPRINTFN(0, "Setting device " 2798 "remote wakeup failed\n"); 2799 } 2800 } 2801 2802 USB_BUS_LOCK(udev->bus); 2803 /* 2804 * Checking for suspend condition and setting suspended bit 2805 * must be atomic! 2806 */ 2807 err = usb_peer_should_wakeup(udev); 2808 if (err == 0) { 2809 /* 2810 * Set that this device is suspended. This variable 2811 * must be set before calling USB controller suspend 2812 * callbacks. 2813 */ 2814 udev->flags.self_suspended = 1; 2815 } 2816 USB_BUS_UNLOCK(udev->bus); 2817 2818 if (err != 0) { 2819 if (usb_peer_can_wakeup(udev)) { 2820 /* allow device to do remote wakeup */ 2821 err = usbd_clear_dev_wakeup(udev); 2822 if (err) { 2823 DPRINTFN(0, "Setting device " 2824 "remote wakeup failed\n"); 2825 } 2826 } 2827 2828 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2829 /* resume parent HUB first */ 2830 usb_dev_resume_peer(udev->parent_hub); 2831 2832 /* reduce chance of instant resume failure by waiting a little bit */ 2833 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2834 2835 /* resume current port (Valid in Host and Device Mode) */ 2836 err = usbd_req_clear_port_feature(udev->parent_hub, 2837 NULL, udev->port_no, UHF_PORT_SUSPEND); 2838 2839 /* resume settle time */ 2840 usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); 2841 } 2842 DPRINTF("Suspend was cancelled!\n"); 2843 return; 2844 } 2845 2846 usbd_sr_lock(udev); 2847 2848 /* notify all sub-devices about suspend */ 2849 err = usb_suspend_resume(udev, 1); 2850 2851 usbd_sr_unlock(udev); 2852 2853 if (udev->bus->methods->device_suspend != NULL) { 2854 usb_timeout_t temp; 2855 2856 /* suspend device on the USB controller */ 2857 (udev->bus->methods->device_suspend) (udev); 2858 2859 /* do DMA delay */ 2860 temp = usbd_get_dma_delay(udev); 2861 if (temp != 0) 2862 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2863 } 2864 2865 if (usb_device_20_compatible(udev)) { 2866 /* suspend current port */ 2867 err = usbd_req_set_port_feature(udev->parent_hub, 2868 NULL, udev->port_no, UHF_PORT_SUSPEND); 2869 if (err) { 2870 DPRINTFN(0, "Suspending port failed\n"); 2871 return; 2872 } 2873 } else { 2874 /* suspend current port */ 2875 err = usbd_req_set_port_link_state(udev->parent_hub, 2876 NULL, udev->port_no, UPS_PORT_LS_U3); 2877 if (err) { 2878 DPRINTFN(0, "Suspending port failed\n"); 2879 return; 2880 } 2881 } 2882 2883 udev = udev->parent_hub; 2884 goto repeat; 2885 } 2886 2887 /*------------------------------------------------------------------------* 2888 * usbd_set_power_mode 2889 * 2890 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2891 * USB device. 2892 *------------------------------------------------------------------------*/ 2893 void 2894 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2895 { 2896 /* filter input argument */ 2897 if ((power_mode != USB_POWER_MODE_ON) && 2898 (power_mode != USB_POWER_MODE_OFF)) 2899 power_mode = USB_POWER_MODE_SAVE; 2900 2901 power_mode = usbd_filter_power_mode(udev, power_mode); 2902 2903 udev->power_mode = power_mode; /* update copy of power mode */ 2904 2905 #if USB_HAVE_POWERD 2906 usb_bus_power_update(udev->bus); 2907 #else 2908 usb_needs_explore(udev->bus, 0 /* no probe */ ); 2909 #endif 2910 } 2911 2912 /*------------------------------------------------------------------------* 2913 * usbd_filter_power_mode 2914 * 2915 * This function filters the power mode based on hardware requirements. 2916 *------------------------------------------------------------------------*/ 2917 uint8_t 2918 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2919 { 2920 const struct usb_bus_methods *mtod; 2921 int8_t temp; 2922 2923 mtod = udev->bus->methods; 2924 temp = -1; 2925 2926 if (mtod->get_power_mode != NULL) 2927 (mtod->get_power_mode) (udev, &temp); 2928 2929 /* check if we should not filter */ 2930 if (temp < 0) 2931 return (power_mode); 2932 2933 /* use fixed power mode given by hardware driver */ 2934 return (temp); 2935 } 2936 2937 /*------------------------------------------------------------------------* 2938 * usbd_start_re_enumerate 2939 * 2940 * This function starts re-enumeration of the given USB device. This 2941 * function does not need to be called BUS-locked. This function does 2942 * not wait until the re-enumeration is completed. 2943 *------------------------------------------------------------------------*/ 2944 void 2945 usbd_start_re_enumerate(struct usb_device *udev) 2946 { 2947 if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { 2948 udev->re_enumerate_wait = USB_RE_ENUM_START; 2949 usb_needs_explore(udev->bus, 0); 2950 } 2951 } 2952 2953 /*-----------------------------------------------------------------------* 2954 * usbd_start_set_config 2955 * 2956 * This function starts setting a USB configuration. This function 2957 * does not need to be called BUS-locked. This function does not wait 2958 * until the set USB configuratino is completed. 2959 *------------------------------------------------------------------------*/ 2960 usb_error_t 2961 usbd_start_set_config(struct usb_device *udev, uint8_t index) 2962 { 2963 if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { 2964 if (udev->curr_config_index == index) { 2965 /* no change needed */ 2966 return (0); 2967 } 2968 udev->next_config_index = index; 2969 udev->re_enumerate_wait = USB_RE_ENUM_SET_CONFIG; 2970 usb_needs_explore(udev->bus, 0); 2971 return (0); 2972 } else if (udev->re_enumerate_wait == USB_RE_ENUM_SET_CONFIG) { 2973 if (udev->next_config_index == index) { 2974 /* no change needed */ 2975 return (0); 2976 } 2977 } 2978 return (USB_ERR_PENDING_REQUESTS); 2979 } 2980