1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 5 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 6 * Copyright (c) 2008-2022 Hans Petter Selasky 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 /* 31 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 32 */ 33 34 #ifdef USB_GLOBAL_INCLUDE_FILE 35 #include USB_GLOBAL_INCLUDE_FILE 36 #else 37 #include <sys/stdint.h> 38 #include <sys/stddef.h> 39 #include <sys/param.h> 40 #include <sys/queue.h> 41 #include <sys/types.h> 42 #include <sys/systm.h> 43 #include <sys/kernel.h> 44 #include <sys/bus.h> 45 #include <sys/module.h> 46 #include <sys/lock.h> 47 #include <sys/mutex.h> 48 #include <sys/condvar.h> 49 #include <sys/sbuf.h> 50 #include <sys/sysctl.h> 51 #include <sys/sx.h> 52 #include <sys/unistd.h> 53 #include <sys/callout.h> 54 #include <sys/malloc.h> 55 #include <sys/priv.h> 56 57 #include <dev/usb/usb.h> 58 #include <dev/usb/usbdi.h> 59 #include <dev/usb/usbdi_util.h> 60 61 #define USB_DEBUG_VAR uhub_debug 62 63 #include <dev/usb/usb_core.h> 64 #include <dev/usb/usb_process.h> 65 #include <dev/usb/usb_device.h> 66 #include <dev/usb/usb_request.h> 67 #include <dev/usb/usb_debug.h> 68 #include <dev/usb/usb_hub.h> 69 #include <dev/usb/usb_util.h> 70 #include <dev/usb/usb_busdma.h> 71 #include <dev/usb/usb_transfer.h> 72 #include <dev/usb/usb_dynamic.h> 73 74 #include <dev/usb/usb_controller.h> 75 #include <dev/usb/usb_bus.h> 76 #endif /* USB_GLOBAL_INCLUDE_FILE */ 77 78 #include <dev/usb/usb_hub_private.h> 79 80 #ifdef USB_DEBUG 81 static int uhub_debug = 0; 82 83 static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 84 "USB HUB"); 85 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RWTUN, &uhub_debug, 0, 86 "Debug level"); 87 #endif 88 89 #if USB_HAVE_POWERD 90 static int usb_power_timeout = 30; /* seconds */ 91 92 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RWTUN, 93 &usb_power_timeout, 0, "USB power timeout"); 94 #endif 95 96 #if USB_HAVE_DISABLE_ENUM 97 static int usb_disable_enumeration = 0; 98 SYSCTL_INT(_hw_usb, OID_AUTO, disable_enumeration, CTLFLAG_RWTUN, 99 &usb_disable_enumeration, 0, "Set to disable all USB device enumeration. " 100 "This can secure against USB devices turning evil, " 101 "for example a USB memory stick becoming a USB keyboard."); 102 103 static int usb_disable_port_power = 0; 104 SYSCTL_INT(_hw_usb, OID_AUTO, disable_port_power, CTLFLAG_RWTUN, 105 &usb_disable_port_power, 0, "Set to disable all USB port power."); 106 #endif 107 108 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 109 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 110 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 111 #define UHUB_IS_MULTI_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBMTT) 112 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 113 114 /* prototypes for type checking: */ 115 116 static device_suspend_t uhub_suspend; 117 static device_resume_t uhub_resume; 118 119 static bus_driver_added_t uhub_driver_added; 120 static bus_child_pnpinfo_t uhub_child_pnpinfo; 121 122 static usb_callback_t uhub_intr_callback; 123 #if USB_HAVE_TT_SUPPORT 124 static usb_callback_t uhub_reset_tt_callback; 125 #endif 126 127 static void usb_dev_resume_peer(struct usb_device *udev); 128 static void usb_dev_suspend_peer(struct usb_device *udev); 129 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 130 131 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 132 [UHUB_INTR_TRANSFER] = { 133 .type = UE_INTERRUPT, 134 .endpoint = UE_ADDR_ANY, 135 .direction = UE_DIR_ANY, 136 .timeout = 0, 137 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 138 .bufsize = 0, /* use wMaxPacketSize */ 139 .callback = &uhub_intr_callback, 140 .interval = UHUB_INTR_INTERVAL, 141 }, 142 #if USB_HAVE_TT_SUPPORT 143 [UHUB_RESET_TT_TRANSFER] = { 144 .type = UE_CONTROL, 145 .endpoint = 0x00, /* Control pipe */ 146 .direction = UE_DIR_ANY, 147 .bufsize = sizeof(struct usb_device_request), 148 .callback = &uhub_reset_tt_callback, 149 .timeout = 1000, /* 1 second */ 150 .usb_mode = USB_MODE_HOST, 151 }, 152 #endif 153 }; 154 155 /* 156 * driver instance for "hub" connected to "usb" 157 * and "hub" connected to "hub" 158 */ 159 static device_method_t uhub_methods[] = { 160 DEVMETHOD(device_probe, uhub_probe), 161 DEVMETHOD(device_attach, uhub_attach), 162 DEVMETHOD(device_detach, uhub_detach), 163 164 DEVMETHOD(device_suspend, uhub_suspend), 165 DEVMETHOD(device_resume, uhub_resume), 166 167 DEVMETHOD(bus_child_location, uhub_child_location), 168 DEVMETHOD(bus_child_pnpinfo, uhub_child_pnpinfo), 169 DEVMETHOD(bus_get_device_path, uhub_get_device_path), 170 DEVMETHOD(bus_driver_added, uhub_driver_added), 171 DEVMETHOD_END 172 }; 173 174 driver_t uhub_driver = { 175 .name = "uhub", 176 .methods = uhub_methods, 177 .size = sizeof(struct uhub_softc) 178 }; 179 180 DRIVER_MODULE(uhub, usbus, uhub_driver, 0, 0); 181 DRIVER_MODULE(uhub, uhub, uhub_driver, 0, 0); 182 MODULE_VERSION(uhub, 1); 183 184 static void 185 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 186 { 187 struct uhub_softc *sc = usbd_xfer_softc(xfer); 188 189 switch (USB_GET_STATE(xfer)) { 190 case USB_ST_TRANSFERRED: 191 DPRINTFN(2, "\n"); 192 /* 193 * This is an indication that some port 194 * has changed status. Notify the bus 195 * event handler thread that we need 196 * to be explored again: 197 */ 198 usb_needs_explore(sc->sc_udev->bus, 0); 199 200 case USB_ST_SETUP: 201 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 202 usbd_transfer_submit(xfer); 203 break; 204 205 default: /* Error */ 206 if (xfer->error != USB_ERR_CANCELLED) { 207 /* 208 * Do a clear-stall. The "stall_pipe" flag 209 * will get cleared before next callback by 210 * the USB stack. 211 */ 212 usbd_xfer_set_stall(xfer); 213 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 214 usbd_transfer_submit(xfer); 215 } 216 break; 217 } 218 } 219 220 /*------------------------------------------------------------------------* 221 * uhub_reset_tt_proc 222 * 223 * This function starts the TT reset USB request 224 *------------------------------------------------------------------------*/ 225 #if USB_HAVE_TT_SUPPORT 226 static void 227 uhub_reset_tt_proc(struct usb_proc_msg *_pm) 228 { 229 struct usb_udev_msg *pm = (void *)_pm; 230 struct usb_device *udev = pm->udev; 231 struct usb_hub *hub; 232 struct uhub_softc *sc; 233 234 hub = udev->hub; 235 if (hub == NULL) 236 return; 237 sc = hub->hubsoftc; 238 if (sc == NULL) 239 return; 240 241 /* Change lock */ 242 USB_BUS_UNLOCK(udev->bus); 243 USB_MTX_LOCK(&sc->sc_mtx); 244 /* Start transfer */ 245 usbd_transfer_start(sc->sc_xfer[UHUB_RESET_TT_TRANSFER]); 246 /* Change lock */ 247 USB_MTX_UNLOCK(&sc->sc_mtx); 248 USB_BUS_LOCK(udev->bus); 249 } 250 #endif 251 252 /*------------------------------------------------------------------------* 253 * uhub_tt_buffer_reset_async_locked 254 * 255 * This function queues a TT reset for the given USB device and endpoint. 256 *------------------------------------------------------------------------*/ 257 #if USB_HAVE_TT_SUPPORT 258 void 259 uhub_tt_buffer_reset_async_locked(struct usb_device *child, struct usb_endpoint *ep) 260 { 261 struct usb_device_request req; 262 struct usb_device *udev; 263 struct usb_hub *hub; 264 struct usb_port *up; 265 uint16_t wValue; 266 uint8_t port; 267 268 if (child == NULL || ep == NULL) 269 return; 270 271 udev = child->parent_hs_hub; 272 port = child->hs_port_no; 273 274 if (udev == NULL) 275 return; 276 277 hub = udev->hub; 278 if ((hub == NULL) || 279 (udev->speed != USB_SPEED_HIGH) || 280 (child->speed != USB_SPEED_LOW && 281 child->speed != USB_SPEED_FULL) || 282 (child->flags.usb_mode != USB_MODE_HOST) || 283 (port == 0) || (ep->edesc == NULL)) { 284 /* not applicable */ 285 return; 286 } 287 288 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); 289 290 up = hub->ports + port - 1; 291 292 if (udev->ddesc.bDeviceClass == UDCLASS_HUB && 293 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBSTT) 294 port = 1; 295 296 /* if we already received a clear buffer request, reset the whole TT */ 297 if (up->req_reset_tt.bRequest != 0) { 298 req.bmRequestType = UT_WRITE_CLASS_OTHER; 299 req.bRequest = UR_RESET_TT; 300 USETW(req.wValue, 0); 301 req.wIndex[0] = port; 302 req.wIndex[1] = 0; 303 USETW(req.wLength, 0); 304 } else { 305 wValue = (ep->edesc->bEndpointAddress & 0xF) | 306 ((child->address & 0x7F) << 4) | 307 ((ep->edesc->bEndpointAddress & 0x80) << 8) | 308 ((ep->edesc->bmAttributes & 3) << 12); 309 310 req.bmRequestType = UT_WRITE_CLASS_OTHER; 311 req.bRequest = UR_CLEAR_TT_BUFFER; 312 USETW(req.wValue, wValue); 313 req.wIndex[0] = port; 314 req.wIndex[1] = 0; 315 USETW(req.wLength, 0); 316 } 317 up->req_reset_tt = req; 318 /* get reset transfer started */ 319 usb_proc_msignal(USB_BUS_TT_PROC(udev->bus), 320 &hub->tt_msg[0], &hub->tt_msg[1]); 321 } 322 #endif 323 324 #if USB_HAVE_TT_SUPPORT 325 static void 326 uhub_reset_tt_callback(struct usb_xfer *xfer, usb_error_t error) 327 { 328 struct uhub_softc *sc; 329 struct usb_device *udev; 330 struct usb_port *up; 331 uint8_t x; 332 333 DPRINTF("TT buffer reset\n"); 334 335 sc = usbd_xfer_softc(xfer); 336 udev = sc->sc_udev; 337 338 switch (USB_GET_STATE(xfer)) { 339 case USB_ST_TRANSFERRED: 340 case USB_ST_SETUP: 341 tr_setup: 342 USB_BUS_LOCK(udev->bus); 343 /* find first port which needs a TT reset */ 344 for (x = 0; x != udev->hub->nports; x++) { 345 up = udev->hub->ports + x; 346 347 if (up->req_reset_tt.bRequest == 0) 348 continue; 349 350 /* copy in the transfer */ 351 usbd_copy_in(xfer->frbuffers, 0, &up->req_reset_tt, 352 sizeof(up->req_reset_tt)); 353 /* reset buffer */ 354 memset(&up->req_reset_tt, 0, sizeof(up->req_reset_tt)); 355 356 /* set length */ 357 usbd_xfer_set_frame_len(xfer, 0, sizeof(up->req_reset_tt)); 358 xfer->nframes = 1; 359 USB_BUS_UNLOCK(udev->bus); 360 361 usbd_transfer_submit(xfer); 362 return; 363 } 364 USB_BUS_UNLOCK(udev->bus); 365 break; 366 367 default: 368 if (error == USB_ERR_CANCELLED) 369 break; 370 371 DPRINTF("TT buffer reset failed (%s)\n", usbd_errstr(error)); 372 goto tr_setup; 373 } 374 } 375 #endif 376 377 /*------------------------------------------------------------------------* 378 * uhub_count_active_host_ports 379 * 380 * This function counts the number of active ports at the given speed. 381 *------------------------------------------------------------------------*/ 382 uint8_t 383 uhub_count_active_host_ports(struct usb_device *udev, enum usb_dev_speed speed) 384 { 385 struct uhub_softc *sc; 386 struct usb_device *child; 387 struct usb_hub *hub; 388 struct usb_port *up; 389 uint8_t retval = 0; 390 uint8_t x; 391 392 if (udev == NULL) 393 goto done; 394 hub = udev->hub; 395 if (hub == NULL) 396 goto done; 397 sc = hub->hubsoftc; 398 if (sc == NULL) 399 goto done; 400 401 for (x = 0; x != hub->nports; x++) { 402 up = hub->ports + x; 403 child = usb_bus_port_get_device(udev->bus, up); 404 if (child != NULL && 405 child->flags.usb_mode == USB_MODE_HOST && 406 child->speed == speed) 407 retval++; 408 } 409 done: 410 return (retval); 411 } 412 413 void 414 uhub_explore_handle_re_enumerate(struct usb_device *child) 415 { 416 uint8_t do_unlock; 417 usb_error_t err; 418 419 /* check if device should be re-enumerated */ 420 if (child->flags.usb_mode != USB_MODE_HOST) 421 return; 422 423 do_unlock = usbd_enum_lock(child); 424 switch (child->re_enumerate_wait) { 425 case USB_RE_ENUM_START: 426 err = usbd_set_config_index(child, 427 USB_UNCONFIG_INDEX); 428 if (err != 0) { 429 DPRINTF("Unconfigure failed: %s: Ignored.\n", 430 usbd_errstr(err)); 431 } 432 if (child->parent_hub == NULL) { 433 /* the root HUB cannot be re-enumerated */ 434 DPRINTFN(6, "cannot reset root HUB\n"); 435 err = 0; 436 } else { 437 err = usbd_req_re_enumerate(child, NULL); 438 } 439 if (err == 0) { 440 /* refresh device strings */ 441 usb_get_langid(child); 442 usb_set_device_strings(child); 443 444 /* set default configuration */ 445 err = usbd_set_config_index(child, 0); 446 } 447 if (err == 0) { 448 err = usb_probe_and_attach(child, 449 USB_IFACE_INDEX_ANY); 450 } 451 child->re_enumerate_wait = USB_RE_ENUM_DONE; 452 break; 453 454 case USB_RE_ENUM_PWR_OFF: 455 /* get the device unconfigured */ 456 err = usbd_set_config_index(child, 457 USB_UNCONFIG_INDEX); 458 if (err) { 459 DPRINTFN(0, "Could not unconfigure " 460 "device (ignored)\n"); 461 } 462 if (child->parent_hub == NULL) { 463 /* the root HUB cannot be re-enumerated */ 464 DPRINTFN(6, "cannot set port feature\n"); 465 err = 0; 466 } else { 467 /* clear port enable */ 468 err = usbd_req_clear_port_feature(child->parent_hub, 469 NULL, child->port_no, UHF_PORT_ENABLE); 470 if (err) { 471 DPRINTFN(0, "Could not disable port " 472 "(ignored)\n"); 473 } 474 } 475 child->re_enumerate_wait = USB_RE_ENUM_DONE; 476 break; 477 478 case USB_RE_ENUM_SET_CONFIG: 479 err = usbd_set_config_index(child, 480 child->next_config_index); 481 if (err != 0) { 482 DPRINTF("Configure failed: %s: Ignored.\n", 483 usbd_errstr(err)); 484 } else { 485 err = usb_probe_and_attach(child, 486 USB_IFACE_INDEX_ANY); 487 } 488 child->re_enumerate_wait = USB_RE_ENUM_DONE; 489 break; 490 491 default: 492 child->re_enumerate_wait = USB_RE_ENUM_DONE; 493 break; 494 } 495 if (do_unlock) 496 usbd_enum_unlock(child); 497 } 498 499 /*------------------------------------------------------------------------* 500 * uhub_explore_sub - subroutine 501 * 502 * Return values: 503 * 0: Success 504 * Else: A control transaction failed 505 *------------------------------------------------------------------------*/ 506 static usb_error_t 507 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 508 { 509 struct usb_bus *bus; 510 struct usb_device *child; 511 uint8_t refcount; 512 usb_error_t err; 513 514 bus = sc->sc_udev->bus; 515 err = USB_ERR_NORMAL_COMPLETION; 516 517 /* get driver added refcount from USB bus */ 518 refcount = bus->driver_added_refcount; 519 520 /* get device assosiated with the given port */ 521 child = usb_bus_port_get_device(bus, up); 522 if (child == NULL) { 523 /* nothing to do */ 524 goto done; 525 } 526 527 uhub_explore_handle_re_enumerate(child); 528 529 /* check if probe and attach should be done */ 530 531 if (child->driver_added_refcount != refcount) { 532 child->driver_added_refcount = refcount; 533 err = usb_probe_and_attach(child, 534 USB_IFACE_INDEX_ANY); 535 if (err) { 536 goto done; 537 } 538 } 539 /* start control transfer, if device mode */ 540 541 if (child->flags.usb_mode == USB_MODE_DEVICE) 542 usbd_ctrl_transfer_setup(child); 543 544 /* if a HUB becomes present, do a recursive HUB explore */ 545 546 if (child->hub) 547 err = (child->hub->explore) (child); 548 549 done: 550 return (err); 551 } 552 553 /*------------------------------------------------------------------------* 554 * uhub_read_port_status - factored out code 555 *------------------------------------------------------------------------*/ 556 static usb_error_t 557 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 558 { 559 struct usb_port_status ps; 560 usb_error_t err; 561 562 if (sc->sc_usb_port_errors >= UHUB_USB_PORT_ERRORS_MAX) { 563 DPRINTFN(4, "port %d, HUB looks dead, too many errors\n", portno); 564 sc->sc_st.port_status = 0; 565 sc->sc_st.port_change = 0; 566 return (USB_ERR_TIMEOUT); 567 } 568 569 err = usbd_req_get_port_status( 570 sc->sc_udev, NULL, &ps, portno); 571 572 if (err == 0) { 573 sc->sc_st.port_status = UGETW(ps.wPortStatus); 574 sc->sc_st.port_change = UGETW(ps.wPortChange); 575 sc->sc_usb_port_errors = 0; 576 } else { 577 sc->sc_st.port_status = 0; 578 sc->sc_st.port_change = 0; 579 sc->sc_usb_port_errors++; 580 } 581 582 /* debugging print */ 583 584 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 585 "wPortChange=0x%04x, err=%s\n", 586 portno, sc->sc_st.port_status, 587 sc->sc_st.port_change, usbd_errstr(err)); 588 return (err); 589 } 590 591 /*------------------------------------------------------------------------* 592 * uhub_reattach_port 593 * 594 * Returns: 595 * 0: Success 596 * Else: A control transaction failed 597 *------------------------------------------------------------------------*/ 598 static usb_error_t 599 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 600 { 601 struct usb_device *child; 602 struct usb_device *udev; 603 enum usb_dev_speed speed; 604 enum usb_hc_mode mode; 605 usb_error_t err; 606 uint16_t power_mask; 607 uint8_t timeout; 608 609 DPRINTF("reattaching port %d\n", portno); 610 611 timeout = 0; 612 udev = sc->sc_udev; 613 child = usb_bus_port_get_device(udev->bus, 614 udev->hub->ports + portno - 1); 615 616 repeat: 617 618 /* first clear the port connection change bit */ 619 620 err = usbd_req_clear_port_feature(udev, NULL, 621 portno, UHF_C_PORT_CONNECTION); 622 623 if (err) 624 goto error; 625 626 /* check if there is a child */ 627 628 if (child != NULL) { 629 /* 630 * Free USB device and all subdevices, if any. 631 */ 632 usb_free_device(child, 0); 633 child = NULL; 634 } 635 /* get fresh status */ 636 637 err = uhub_read_port_status(sc, portno); 638 if (err) 639 goto error; 640 641 #if USB_HAVE_DISABLE_ENUM 642 /* check if we should skip enumeration from this USB HUB */ 643 if (usb_disable_enumeration != 0 || 644 sc->sc_disable_enumeration != 0) { 645 DPRINTF("Enumeration is disabled!\n"); 646 goto error; 647 } 648 #endif 649 /* check if nothing is connected to the port */ 650 651 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) 652 goto error; 653 654 /* check if there is no power on the port and print a warning */ 655 656 switch (udev->speed) { 657 case USB_SPEED_HIGH: 658 case USB_SPEED_FULL: 659 case USB_SPEED_LOW: 660 power_mask = UPS_PORT_POWER; 661 break; 662 case USB_SPEED_SUPER: 663 if (udev->parent_hub == NULL) 664 power_mask = 0; /* XXX undefined */ 665 else 666 power_mask = UPS_PORT_POWER_SS; 667 break; 668 default: 669 power_mask = 0; 670 break; 671 } 672 if ((sc->sc_st.port_status & power_mask) != power_mask) { 673 DPRINTF("WARNING: strange, connected port %d " 674 "has no power\n", portno); 675 } 676 677 /* check if the device is in Host Mode */ 678 679 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 680 DPRINTF("Port %d is in Host Mode\n", portno); 681 682 if (sc->sc_st.port_status & UPS_SUSPEND) { 683 /* 684 * NOTE: Should not get here in SuperSpeed 685 * mode, because the HUB should report this 686 * bit as zero. 687 */ 688 DPRINTF("Port %d was still " 689 "suspended, clearing.\n", portno); 690 err = usbd_req_clear_port_feature(udev, 691 NULL, portno, UHF_PORT_SUSPEND); 692 } 693 694 /* USB Host Mode */ 695 696 /* wait for maximum device power up time */ 697 698 usb_pause_mtx(NULL, 699 USB_MS_TO_TICKS(usb_port_powerup_delay)); 700 701 /* reset port, which implies enabling it */ 702 703 err = usbd_req_reset_port(udev, NULL, portno); 704 705 if (err) { 706 DPRINTFN(0, "port %d reset " 707 "failed, error=%s\n", 708 portno, usbd_errstr(err)); 709 goto error; 710 } 711 /* get port status again, it might have changed during reset */ 712 713 err = uhub_read_port_status(sc, portno); 714 if (err) { 715 goto error; 716 } 717 /* check if something changed during port reset */ 718 719 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 720 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 721 if (timeout) { 722 DPRINTFN(1, "giving up port %d reset - " 723 "device vanished: change %#x status %#x\n", 724 portno, sc->sc_st.port_change, 725 sc->sc_st.port_status); 726 goto error; 727 } 728 timeout = 1; 729 goto repeat; 730 } 731 } else { 732 DPRINTF("Port %d is in Device Mode\n", portno); 733 } 734 735 /* 736 * Figure out the device speed 737 */ 738 switch (udev->speed) { 739 case USB_SPEED_HIGH: 740 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 741 speed = USB_SPEED_HIGH; 742 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 743 speed = USB_SPEED_LOW; 744 else 745 speed = USB_SPEED_FULL; 746 break; 747 case USB_SPEED_FULL: 748 if (sc->sc_st.port_status & UPS_LOW_SPEED) 749 speed = USB_SPEED_LOW; 750 else 751 speed = USB_SPEED_FULL; 752 break; 753 case USB_SPEED_LOW: 754 speed = USB_SPEED_LOW; 755 break; 756 case USB_SPEED_SUPER: 757 if (udev->parent_hub == NULL) { 758 /* Root HUB - special case */ 759 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 760 case 0: 761 speed = USB_SPEED_FULL; 762 break; 763 case UPS_LOW_SPEED: 764 speed = USB_SPEED_LOW; 765 break; 766 case UPS_HIGH_SPEED: 767 speed = USB_SPEED_HIGH; 768 break; 769 default: 770 speed = USB_SPEED_SUPER; 771 break; 772 } 773 } else { 774 speed = USB_SPEED_SUPER; 775 } 776 break; 777 default: 778 /* same speed like parent */ 779 speed = udev->speed; 780 break; 781 } 782 if (speed == USB_SPEED_SUPER) { 783 err = usbd_req_set_hub_u1_timeout(udev, NULL, 784 portno, 128 - (2 * udev->depth)); 785 if (err) { 786 DPRINTFN(0, "port %d U1 timeout " 787 "failed, error=%s\n", 788 portno, usbd_errstr(err)); 789 } 790 err = usbd_req_set_hub_u2_timeout(udev, NULL, 791 portno, 128 - (2 * udev->depth)); 792 if (err) { 793 DPRINTFN(0, "port %d U2 timeout " 794 "failed, error=%s\n", 795 portno, usbd_errstr(err)); 796 } 797 } 798 799 /* 800 * Figure out the device mode 801 * 802 * NOTE: This part is currently FreeBSD specific. 803 */ 804 if (udev->parent_hub != NULL) { 805 /* inherit mode from the parent HUB */ 806 mode = udev->parent_hub->flags.usb_mode; 807 } else if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 808 mode = USB_MODE_DEVICE; 809 else 810 mode = USB_MODE_HOST; 811 812 /* need to create a new child */ 813 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 814 udev->depth + 1, portno - 1, portno, speed, mode); 815 if (child == NULL) { 816 DPRINTFN(0, "could not allocate new device\n"); 817 goto error; 818 } 819 return (0); /* success */ 820 821 error: 822 if (child != NULL) { 823 /* 824 * Free USB device and all subdevices, if any. 825 */ 826 usb_free_device(child, 0); 827 child = NULL; 828 } 829 if (err == 0) { 830 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 831 err = usbd_req_clear_port_feature( 832 sc->sc_udev, NULL, 833 portno, UHF_PORT_ENABLE); 834 } 835 } 836 if (err) { 837 DPRINTFN(0, "device problem (%s), " 838 "disabling port %d\n", usbd_errstr(err), portno); 839 } 840 return (err); 841 } 842 843 /*------------------------------------------------------------------------* 844 * usb_device_20_compatible 845 * 846 * Returns: 847 * 0: HUB does not support suspend and resume 848 * Else: HUB supports suspend and resume 849 *------------------------------------------------------------------------*/ 850 static uint8_t 851 usb_device_20_compatible(struct usb_device *udev) 852 { 853 if (udev == NULL) 854 return (0); 855 switch (udev->speed) { 856 case USB_SPEED_LOW: 857 case USB_SPEED_FULL: 858 case USB_SPEED_HIGH: 859 return (1); 860 default: 861 return (0); 862 } 863 } 864 865 /*------------------------------------------------------------------------* 866 * uhub_suspend_resume_port 867 * 868 * Returns: 869 * 0: Success 870 * Else: A control transaction failed 871 *------------------------------------------------------------------------*/ 872 static usb_error_t 873 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 874 { 875 struct usb_device *child; 876 struct usb_device *udev; 877 uint8_t is_suspend; 878 usb_error_t err; 879 880 DPRINTF("port %d\n", portno); 881 882 udev = sc->sc_udev; 883 child = usb_bus_port_get_device(udev->bus, 884 udev->hub->ports + portno - 1); 885 886 /* first clear the port suspend change bit */ 887 888 if (usb_device_20_compatible(udev)) { 889 err = usbd_req_clear_port_feature(udev, NULL, 890 portno, UHF_C_PORT_SUSPEND); 891 } else { 892 err = usbd_req_clear_port_feature(udev, NULL, 893 portno, UHF_C_PORT_LINK_STATE); 894 } 895 896 if (err) { 897 DPRINTF("clearing suspend failed.\n"); 898 goto done; 899 } 900 /* get fresh status */ 901 902 err = uhub_read_port_status(sc, portno); 903 if (err) { 904 DPRINTF("reading port status failed.\n"); 905 goto done; 906 } 907 /* convert current state */ 908 909 if (usb_device_20_compatible(udev)) { 910 if (sc->sc_st.port_status & UPS_SUSPEND) { 911 is_suspend = 1; 912 } else { 913 is_suspend = 0; 914 } 915 } else { 916 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 917 case UPS_PORT_LS_U3: 918 is_suspend = 1; 919 break; 920 case UPS_PORT_LS_SS_INA: 921 usbd_req_warm_reset_port(udev, NULL, portno); 922 is_suspend = 0; 923 break; 924 default: 925 is_suspend = 0; 926 break; 927 } 928 } 929 930 DPRINTF("suspended=%u\n", is_suspend); 931 932 /* do the suspend or resume */ 933 934 if (child) { 935 /* 936 * This code handle two cases: 1) Host Mode - we can only 937 * receive resume here 2) Device Mode - we can receive 938 * suspend and resume here 939 */ 940 if (is_suspend == 0) 941 usb_dev_resume_peer(child); 942 else if (child->flags.usb_mode == USB_MODE_DEVICE) 943 usb_dev_suspend_peer(child); 944 } 945 done: 946 return (err); 947 } 948 949 /*------------------------------------------------------------------------* 950 * uhub_root_interrupt 951 * 952 * This function is called when a Root HUB interrupt has 953 * happened. "ptr" and "len" makes up the Root HUB interrupt 954 * packet. This function is called having the "bus_mtx" locked. 955 *------------------------------------------------------------------------*/ 956 void 957 uhub_root_intr(struct usb_bus *bus, 958 const uint8_t *ptr __unused, uint8_t len __unused) 959 { 960 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 961 962 usb_needs_explore(bus, 0); 963 } 964 965 static uint8_t 966 uhub_is_too_deep(struct usb_device *udev) 967 { 968 switch (udev->speed) { 969 case USB_SPEED_FULL: 970 case USB_SPEED_LOW: 971 case USB_SPEED_HIGH: 972 if (udev->depth > USB_HUB_MAX_DEPTH) 973 return (1); 974 break; 975 case USB_SPEED_SUPER: 976 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 977 return (1); 978 break; 979 default: 980 break; 981 } 982 return (0); 983 } 984 985 /*------------------------------------------------------------------------* 986 * uhub_explore 987 * 988 * Returns: 989 * 0: Success 990 * Else: Failure 991 *------------------------------------------------------------------------*/ 992 static usb_error_t 993 uhub_explore(struct usb_device *udev) 994 { 995 struct usb_hub *hub; 996 struct uhub_softc *sc; 997 struct usb_port *up; 998 usb_error_t retval; 999 usb_error_t err; 1000 uint8_t portno; 1001 uint8_t x; 1002 uint8_t do_unlock; 1003 1004 hub = udev->hub; 1005 sc = hub->hubsoftc; 1006 1007 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 1008 1009 /* ignore devices that are too deep */ 1010 if (uhub_is_too_deep(udev)) 1011 return (USB_ERR_TOO_DEEP); 1012 1013 /* check if device is suspended */ 1014 if (udev->flags.self_suspended) { 1015 /* need to wait until the child signals resume */ 1016 DPRINTF("Device is suspended!\n"); 1017 return (USB_ERR_NORMAL_COMPLETION); 1018 } 1019 1020 /* 1021 * Make sure we don't race against user-space applications 1022 * like LibUSB: 1023 */ 1024 do_unlock = usbd_enum_lock(udev); 1025 1026 /* 1027 * Set default error code to avoid compiler warnings. 1028 * Note that hub->nports cannot be zero. 1029 */ 1030 retval = USB_ERR_NORMAL_COMPLETION; 1031 1032 for (x = 0; x != hub->nports; x++) { 1033 up = hub->ports + x; 1034 portno = x + 1; 1035 1036 err = uhub_read_port_status(sc, portno); 1037 if (err != USB_ERR_NORMAL_COMPLETION) 1038 retval = err; 1039 1040 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 1041 DPRINTF("Overcurrent on port %u.\n", portno); 1042 err = usbd_req_clear_port_feature( 1043 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 1044 if (err != USB_ERR_NORMAL_COMPLETION) 1045 retval = err; 1046 } 1047 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 1048 /* 1049 * Fake a connect status change so that the 1050 * status gets checked initially! 1051 */ 1052 sc->sc_st.port_change |= 1053 UPS_C_CONNECT_STATUS; 1054 } 1055 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 1056 err = usbd_req_clear_port_feature( 1057 udev, NULL, portno, UHF_C_PORT_ENABLE); 1058 if (err != USB_ERR_NORMAL_COMPLETION) 1059 retval = err; 1060 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 1061 /* 1062 * Ignore the port error if the device 1063 * has vanished ! 1064 */ 1065 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 1066 DPRINTFN(0, "illegal enable change, " 1067 "port %d\n", portno); 1068 } else { 1069 if (up->restartcnt == USB_RESTART_MAX) { 1070 /* XXX could try another speed ? */ 1071 DPRINTFN(0, "port error, giving up " 1072 "port %d\n", portno); 1073 } else { 1074 sc->sc_st.port_change |= 1075 UPS_C_CONNECT_STATUS; 1076 up->restartcnt++; 1077 } 1078 } 1079 } 1080 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 1081 err = uhub_reattach_port(sc, portno); 1082 if (err != USB_ERR_NORMAL_COMPLETION) 1083 retval = err; 1084 } 1085 if (sc->sc_st.port_change & (UPS_C_SUSPEND | 1086 UPS_C_PORT_LINK_STATE)) { 1087 err = uhub_suspend_resume_port(sc, portno); 1088 if (err != USB_ERR_NORMAL_COMPLETION) 1089 retval = err; 1090 } 1091 if (udev->speed == USB_SPEED_SUPER && 1092 (sc->sc_st.port_change & UPS_C_BH_PORT_RESET) != 0) { 1093 DPRINTF("Warm reset finished on port %u.\n", portno); 1094 err = usbd_req_clear_port_feature( 1095 udev, NULL, portno, UHF_C_BH_PORT_RESET); 1096 if (err != USB_ERR_NORMAL_COMPLETION) 1097 retval = err; 1098 } 1099 if (sc->sc_st.port_change & UPS_C_PORT_RESET) { 1100 DPRINTF("Port reset finished on port %u.\n", portno); 1101 err = usbd_req_clear_port_feature( 1102 udev, NULL, portno, UHF_C_PORT_RESET); 1103 if (err != USB_ERR_NORMAL_COMPLETION) 1104 retval = err; 1105 } 1106 1107 if (uhub_explore_sub(sc, up) == USB_ERR_NORMAL_COMPLETION) { 1108 /* explore succeeded - reset restart counter */ 1109 up->restartcnt = 0; 1110 } 1111 } 1112 1113 if (do_unlock) 1114 usbd_enum_unlock(udev); 1115 1116 /* initial status checked */ 1117 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 1118 1119 return (retval); 1120 } 1121 1122 int 1123 uhub_probe(device_t dev) 1124 { 1125 struct usb_attach_arg *uaa = device_get_ivars(dev); 1126 1127 if (uaa->usb_mode != USB_MODE_HOST) 1128 return (ENXIO); 1129 1130 /* 1131 * The subclass for USB HUBs is currently ignored because it 1132 * is 0 for some and 1 for others. 1133 */ 1134 if (uaa->info.bConfigIndex == 0 && 1135 uaa->info.bDeviceClass == UDCLASS_HUB) 1136 return (BUS_PROBE_DEFAULT); 1137 1138 return (ENXIO); 1139 } 1140 1141 /* NOTE: The information returned by this function can be wrong. */ 1142 usb_error_t 1143 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 1144 { 1145 struct usb_hub_descriptor hubdesc20; 1146 struct usb_hub_ss_descriptor hubdesc30; 1147 usb_error_t err; 1148 uint8_t nports; 1149 uint8_t tt; 1150 1151 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 1152 return (USB_ERR_INVAL); 1153 1154 nports = 0; 1155 tt = 0; 1156 1157 switch (udev->speed) { 1158 case USB_SPEED_LOW: 1159 case USB_SPEED_FULL: 1160 case USB_SPEED_HIGH: 1161 /* assuming that there is one port */ 1162 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 1163 if (err) { 1164 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 1165 "error=%s\n", usbd_errstr(err)); 1166 break; 1167 } 1168 nports = hubdesc20.bNbrPorts; 1169 if (nports > 127) 1170 nports = 127; 1171 1172 if (udev->speed == USB_SPEED_HIGH) 1173 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 1174 break; 1175 1176 case USB_SPEED_SUPER: 1177 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1178 if (err) { 1179 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1180 "error=%s\n", usbd_errstr(err)); 1181 break; 1182 } 1183 nports = hubdesc30.bNbrPorts; 1184 if (nports > 16) 1185 nports = 16; 1186 break; 1187 1188 default: 1189 err = USB_ERR_INVAL; 1190 break; 1191 } 1192 1193 if (pnports != NULL) 1194 *pnports = nports; 1195 1196 if (ptt != NULL) 1197 *ptt = tt; 1198 1199 return (err); 1200 } 1201 1202 int 1203 uhub_attach(device_t dev) 1204 { 1205 struct uhub_softc *sc = device_get_softc(dev); 1206 struct usb_attach_arg *uaa = device_get_ivars(dev); 1207 struct usb_device *udev = uaa->device; 1208 struct usb_device *parent_hub = udev->parent_hub; 1209 struct usb_hub *hub; 1210 struct usb_hub_descriptor hubdesc20; 1211 struct usb_hub_ss_descriptor hubdesc30; 1212 #if USB_HAVE_DISABLE_ENUM 1213 struct sysctl_ctx_list *sysctl_ctx; 1214 struct sysctl_oid *sysctl_tree; 1215 #endif 1216 uint16_t pwrdly; 1217 uint16_t nports; 1218 uint8_t x; 1219 uint8_t portno; 1220 uint8_t removable; 1221 uint8_t iface_index; 1222 usb_error_t err; 1223 1224 sc->sc_udev = udev; 1225 sc->sc_dev = dev; 1226 1227 mtx_init(&sc->sc_mtx, "USB HUB mutex", NULL, MTX_DEF); 1228 1229 device_set_usb_desc(dev); 1230 1231 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 1232 "parent->selfpowered=%d\n", 1233 udev->depth, 1234 udev->flags.self_powered, 1235 parent_hub, 1236 parent_hub ? 1237 parent_hub->flags.self_powered : 0); 1238 1239 if (uhub_is_too_deep(udev)) { 1240 DPRINTFN(0, "HUB at depth %d, " 1241 "exceeds maximum. HUB ignored\n", (int)udev->depth); 1242 goto error; 1243 } 1244 1245 if (!udev->flags.self_powered && parent_hub && 1246 !parent_hub->flags.self_powered) { 1247 DPRINTFN(0, "Bus powered HUB connected to " 1248 "bus powered HUB. HUB ignored\n"); 1249 goto error; 1250 } 1251 1252 if (UHUB_IS_MULTI_TT(sc)) { 1253 err = usbd_set_alt_interface_index(udev, 0, 1); 1254 if (err) { 1255 device_printf(dev, "MTT could not be enabled\n"); 1256 goto error; 1257 } 1258 device_printf(dev, "MTT enabled\n"); 1259 } 1260 1261 /* get HUB descriptor */ 1262 1263 DPRINTFN(2, "Getting HUB descriptor\n"); 1264 1265 switch (udev->speed) { 1266 case USB_SPEED_LOW: 1267 case USB_SPEED_FULL: 1268 case USB_SPEED_HIGH: 1269 /* assuming that there is one port */ 1270 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 1271 if (err) { 1272 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 1273 "error=%s\n", usbd_errstr(err)); 1274 goto error; 1275 } 1276 /* get number of ports */ 1277 nports = hubdesc20.bNbrPorts; 1278 1279 /* get power delay */ 1280 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1281 usb_extra_power_up_time); 1282 1283 /* get complete HUB descriptor */ 1284 if (nports >= 8) { 1285 /* check number of ports */ 1286 if (nports > 127) { 1287 DPRINTFN(0, "Invalid number of USB 2.0 ports," 1288 "error=%s\n", usbd_errstr(err)); 1289 goto error; 1290 } 1291 /* get complete HUB descriptor */ 1292 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 1293 1294 if (err) { 1295 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1296 "error=%s\n", usbd_errstr(err)); 1297 goto error; 1298 } 1299 if (hubdesc20.bNbrPorts != nports) { 1300 DPRINTFN(0, "Number of ports changed\n"); 1301 goto error; 1302 } 1303 } 1304 break; 1305 case USB_SPEED_SUPER: 1306 if (udev->parent_hub != NULL) { 1307 err = usbd_req_set_hub_depth(udev, NULL, 1308 udev->depth - 1); 1309 if (err) { 1310 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 1311 "error=%s\n", usbd_errstr(err)); 1312 goto error; 1313 } 1314 } 1315 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1316 if (err) { 1317 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1318 "error=%s\n", usbd_errstr(err)); 1319 goto error; 1320 } 1321 /* get number of ports */ 1322 nports = hubdesc30.bNbrPorts; 1323 1324 /* get power delay */ 1325 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1326 usb_extra_power_up_time); 1327 1328 /* get complete HUB descriptor */ 1329 if (nports >= 8) { 1330 /* check number of ports */ 1331 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 1332 DPRINTFN(0, "Invalid number of USB 3.0 ports," 1333 "error=%s\n", usbd_errstr(err)); 1334 goto error; 1335 } 1336 /* get complete HUB descriptor */ 1337 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 1338 1339 if (err) { 1340 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1341 "error=%s\n", usbd_errstr(err)); 1342 goto error; 1343 } 1344 if (hubdesc30.bNbrPorts != nports) { 1345 DPRINTFN(0, "Number of ports changed\n"); 1346 goto error; 1347 } 1348 } 1349 break; 1350 default: 1351 DPRINTF("Assuming HUB has only one port\n"); 1352 /* default number of ports */ 1353 nports = 1; 1354 /* default power delay */ 1355 pwrdly = ((10 * UHD_PWRON_FACTOR) + usb_extra_power_up_time); 1356 break; 1357 } 1358 if (nports == 0) { 1359 DPRINTFN(0, "portless HUB\n"); 1360 goto error; 1361 } 1362 if (nports > USB_MAX_PORTS) { 1363 DPRINTF("Port limit exceeded\n"); 1364 goto error; 1365 } 1366 #if (USB_HAVE_FIXED_PORT == 0) 1367 hub = malloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1368 M_USBDEV, M_WAITOK | M_ZERO); 1369 1370 if (hub == NULL) 1371 goto error; 1372 #else 1373 hub = &sc->sc_hub; 1374 #endif 1375 udev->hub = hub; 1376 1377 /* initialize HUB structure */ 1378 hub->hubsoftc = sc; 1379 hub->explore = &uhub_explore; 1380 hub->nports = nports; 1381 hub->hubudev = udev; 1382 #if USB_HAVE_TT_SUPPORT 1383 hub->tt_msg[0].hdr.pm_callback = &uhub_reset_tt_proc; 1384 hub->tt_msg[0].udev = udev; 1385 hub->tt_msg[1].hdr.pm_callback = &uhub_reset_tt_proc; 1386 hub->tt_msg[1].udev = udev; 1387 #endif 1388 /* if self powered hub, give ports maximum current */ 1389 if (udev->flags.self_powered) { 1390 hub->portpower = USB_MAX_POWER; 1391 } else { 1392 hub->portpower = USB_MIN_POWER; 1393 } 1394 1395 /* set up interrupt pipe */ 1396 iface_index = 0; 1397 if (udev->parent_hub == NULL) { 1398 /* root HUB is special */ 1399 err = 0; 1400 } else { 1401 /* normal HUB */ 1402 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1403 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_mtx); 1404 } 1405 if (err) { 1406 DPRINTFN(0, "cannot setup interrupt transfer, " 1407 "errstr=%s\n", usbd_errstr(err)); 1408 goto error; 1409 } 1410 /* wait with power off for a while */ 1411 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1412 1413 #if USB_HAVE_DISABLE_ENUM 1414 /* Add device sysctls */ 1415 1416 sysctl_ctx = device_get_sysctl_ctx(dev); 1417 sysctl_tree = device_get_sysctl_tree(dev); 1418 1419 if (sysctl_ctx != NULL && sysctl_tree != NULL) { 1420 (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1421 OID_AUTO, "disable_enumeration", CTLFLAG_RWTUN, 1422 &sc->sc_disable_enumeration, 0, 1423 "Set to disable enumeration on this USB HUB."); 1424 1425 (void) SYSCTL_ADD_INT(sysctl_ctx, SYSCTL_CHILDREN(sysctl_tree), 1426 OID_AUTO, "disable_port_power", CTLFLAG_RWTUN, 1427 &sc->sc_disable_port_power, 0, 1428 "Set to disable USB port power on this USB HUB."); 1429 } 1430 #endif 1431 /* 1432 * To have the best chance of success we do things in the exact same 1433 * order as Windoze98. This should not be necessary, but some 1434 * devices do not follow the USB specs to the letter. 1435 * 1436 * These are the events on the bus when a hub is attached: 1437 * Get device and config descriptors (see attach code) 1438 * Get hub descriptor (see above) 1439 * For all ports 1440 * turn on power 1441 * wait for power to become stable 1442 * (all below happens in explore code) 1443 * For all ports 1444 * clear C_PORT_CONNECTION 1445 * For all ports 1446 * get port status 1447 * if device connected 1448 * wait 100 ms 1449 * turn on reset 1450 * wait 1451 * clear C_PORT_RESET 1452 * get port status 1453 * proceed with device attachment 1454 */ 1455 1456 /* XXX should check for none, individual, or ganged power? */ 1457 1458 removable = 0; 1459 1460 for (x = 0; x != nports; x++) { 1461 /* set up data structures */ 1462 struct usb_port *up = hub->ports + x; 1463 1464 up->device_index = 0; 1465 up->restartcnt = 0; 1466 portno = x + 1; 1467 1468 /* check if port is removable */ 1469 switch (udev->speed) { 1470 case USB_SPEED_LOW: 1471 case USB_SPEED_FULL: 1472 case USB_SPEED_HIGH: 1473 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1474 removable++; 1475 break; 1476 case USB_SPEED_SUPER: 1477 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1478 removable++; 1479 break; 1480 default: 1481 DPRINTF("Assuming removable port\n"); 1482 removable++; 1483 break; 1484 } 1485 if (err == 0) { 1486 #if USB_HAVE_DISABLE_ENUM 1487 /* check if we should disable USB port power or not */ 1488 if (usb_disable_port_power != 0 || 1489 sc->sc_disable_port_power != 0) { 1490 /* turn the power off */ 1491 DPRINTFN(2, "Turning port %d power off\n", portno); 1492 err = usbd_req_clear_port_feature(udev, NULL, 1493 portno, UHF_PORT_POWER); 1494 } else { 1495 #endif 1496 /* turn the power on */ 1497 DPRINTFN(2, "Turning port %d power on\n", portno); 1498 err = usbd_req_set_port_feature(udev, NULL, 1499 portno, UHF_PORT_POWER); 1500 #if USB_HAVE_DISABLE_ENUM 1501 } 1502 #endif 1503 } 1504 if (err != 0) { 1505 DPRINTFN(0, "port %d power on or off failed, %s\n", 1506 portno, usbd_errstr(err)); 1507 } 1508 DPRINTF("turn on port %d power\n", 1509 portno); 1510 1511 /* wait for stable power */ 1512 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1513 } 1514 1515 device_printf(dev, "%d port%s with %d " 1516 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1517 removable, udev->flags.self_powered ? "self" : "bus"); 1518 1519 /* Start the interrupt endpoint, if any */ 1520 1521 USB_MTX_LOCK(&sc->sc_mtx); 1522 usbd_transfer_start(sc->sc_xfer[UHUB_INTR_TRANSFER]); 1523 USB_MTX_UNLOCK(&sc->sc_mtx); 1524 1525 /* Enable automatic power save on all USB HUBs */ 1526 1527 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1528 1529 return (0); 1530 1531 error: 1532 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1533 1534 #if (USB_HAVE_FIXED_PORT == 0) 1535 free(udev->hub, M_USBDEV); 1536 #endif 1537 udev->hub = NULL; 1538 1539 mtx_destroy(&sc->sc_mtx); 1540 1541 return (ENXIO); 1542 } 1543 1544 /* 1545 * Called from process context when the hub is gone. 1546 * Detach all devices on active ports. 1547 */ 1548 int 1549 uhub_detach(device_t dev) 1550 { 1551 struct uhub_softc *sc = device_get_softc(dev); 1552 struct usb_hub *hub = sc->sc_udev->hub; 1553 struct usb_bus *bus = sc->sc_udev->bus; 1554 struct usb_device *child; 1555 uint8_t x; 1556 1557 if (hub == NULL) /* must be partially working */ 1558 return (0); 1559 1560 /* Make sure interrupt transfer is gone. */ 1561 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1562 1563 /* Detach all ports */ 1564 for (x = 0; x != hub->nports; x++) { 1565 child = usb_bus_port_get_device(bus, hub->ports + x); 1566 1567 if (child == NULL) { 1568 continue; 1569 } 1570 1571 /* 1572 * Free USB device and all subdevices, if any. 1573 */ 1574 usb_free_device(child, 0); 1575 } 1576 1577 #if USB_HAVE_TT_SUPPORT 1578 /* Make sure our TT messages are not queued anywhere */ 1579 USB_BUS_LOCK(bus); 1580 usb_proc_mwait(USB_BUS_TT_PROC(bus), 1581 &hub->tt_msg[0], &hub->tt_msg[1]); 1582 USB_BUS_UNLOCK(bus); 1583 #endif 1584 1585 #if (USB_HAVE_FIXED_PORT == 0) 1586 free(hub, M_USBDEV); 1587 #endif 1588 sc->sc_udev->hub = NULL; 1589 1590 mtx_destroy(&sc->sc_mtx); 1591 1592 return (0); 1593 } 1594 1595 static int 1596 uhub_suspend(device_t dev) 1597 { 1598 DPRINTF("\n"); 1599 /* Sub-devices are not suspended here! */ 1600 return (0); 1601 } 1602 1603 static int 1604 uhub_resume(device_t dev) 1605 { 1606 DPRINTF("\n"); 1607 /* Sub-devices are not resumed here! */ 1608 return (0); 1609 } 1610 1611 static void 1612 uhub_driver_added(device_t dev, driver_t *driver) 1613 { 1614 usb_needs_explore_all(); 1615 } 1616 1617 void 1618 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1619 struct hub_result *res) 1620 { 1621 struct usb_interface *iface; 1622 struct usb_device *udev; 1623 uint8_t nports; 1624 uint8_t x; 1625 uint8_t i; 1626 1627 nports = hub->nports; 1628 for (x = 0; x != nports; x++) { 1629 udev = usb_bus_port_get_device(hub->hubudev->bus, 1630 hub->ports + x); 1631 if (!udev) { 1632 continue; 1633 } 1634 for (i = 0; i != USB_IFACE_MAX; i++) { 1635 iface = usbd_get_iface(udev, i); 1636 if (iface && 1637 (iface->subdev == child)) { 1638 res->iface_index = i; 1639 res->udev = udev; 1640 res->portno = x + 1; 1641 return; 1642 } 1643 } 1644 } 1645 res->iface_index = 0; 1646 res->udev = NULL; 1647 res->portno = 0; 1648 } 1649 1650 int 1651 uhub_child_location(device_t parent, device_t child, struct sbuf *sb) 1652 { 1653 struct uhub_softc *sc; 1654 struct usb_hub *hub; 1655 struct hub_result res; 1656 1657 if (!device_is_attached(parent)) 1658 return (0); 1659 1660 sc = device_get_softc(parent); 1661 hub = sc->sc_udev->hub; 1662 1663 bus_topo_lock(); 1664 uhub_find_iface_index(hub, child, &res); 1665 if (!res.udev) { 1666 DPRINTF("device not on hub\n"); 1667 goto done; 1668 } 1669 sbuf_printf(sb, "bus=%u hubaddr=%u port=%u devaddr=%u" 1670 " interface=%u" 1671 #if USB_HAVE_UGEN 1672 " ugen=%s" 1673 #endif 1674 , device_get_unit(res.udev->bus->bdev) 1675 , (res.udev->parent_hub != NULL) ? 1676 res.udev->parent_hub->device_index : 0 1677 , res.portno, res.udev->device_index, res.iface_index 1678 #if USB_HAVE_UGEN 1679 , res.udev->ugen_name 1680 #endif 1681 ); 1682 done: 1683 bus_topo_unlock(); 1684 1685 return (0); 1686 } 1687 1688 int 1689 uhub_get_device_path(device_t bus, device_t child, const char *locator, 1690 struct sbuf *sb) 1691 { 1692 struct uhub_softc *sc; 1693 struct usb_hub *hub; 1694 struct hub_result res; 1695 int rv; 1696 1697 if (strcmp(locator, BUS_LOCATOR_UEFI) == 0) { 1698 rv = bus_generic_get_device_path(device_get_parent(bus), bus, locator, sb); 1699 if (rv != 0) 1700 return (rv); 1701 1702 sc = device_get_softc(bus); 1703 hub = sc->sc_udev->hub; 1704 1705 bus_topo_lock(); 1706 uhub_find_iface_index(hub, child, &res); 1707 if (!res.udev) { 1708 printf("device not on hub\n"); 1709 goto done; 1710 } 1711 sbuf_printf(sb, "/USB(0x%x,0x%x)", res.portno - 1, res.iface_index); 1712 done: 1713 bus_topo_unlock(); 1714 return (0); 1715 } 1716 1717 /* For the rest, punt to the default handler */ 1718 return (bus_generic_get_device_path(bus, child, locator, sb)); 1719 } 1720 1721 static int 1722 uhub_child_pnpinfo(device_t parent, device_t child, struct sbuf*sb) 1723 { 1724 struct uhub_softc *sc; 1725 struct usb_hub *hub; 1726 struct usb_interface *iface; 1727 struct hub_result res; 1728 uint8_t do_unlock; 1729 1730 if (!device_is_attached(parent)) 1731 return (0); 1732 1733 sc = device_get_softc(parent); 1734 hub = sc->sc_udev->hub; 1735 1736 bus_topo_lock(); 1737 uhub_find_iface_index(hub, child, &res); 1738 if (!res.udev) { 1739 DPRINTF("device not on hub\n"); 1740 goto done; 1741 } 1742 iface = usbd_get_iface(res.udev, res.iface_index); 1743 if (iface && iface->idesc) { 1744 /* Make sure device information is not changed during the print. */ 1745 do_unlock = usbd_ctrl_lock(res.udev); 1746 1747 sbuf_printf(sb, "vendor=0x%04x product=0x%04x " 1748 "devclass=0x%02x devsubclass=0x%02x " 1749 "devproto=0x%02x " 1750 "sernum=\"%s\" " 1751 "release=0x%04x " 1752 "mode=%s " 1753 "intclass=0x%02x intsubclass=0x%02x " 1754 "intprotocol=0x%02x" "%s%s", 1755 UGETW(res.udev->ddesc.idVendor), 1756 UGETW(res.udev->ddesc.idProduct), 1757 res.udev->ddesc.bDeviceClass, 1758 res.udev->ddesc.bDeviceSubClass, 1759 res.udev->ddesc.bDeviceProtocol, 1760 usb_get_serial(res.udev), 1761 UGETW(res.udev->ddesc.bcdDevice), 1762 (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 1763 iface->idesc->bInterfaceClass, 1764 iface->idesc->bInterfaceSubClass, 1765 iface->idesc->bInterfaceProtocol, 1766 iface->pnpinfo ? " " : "", 1767 iface->pnpinfo ? iface->pnpinfo : ""); 1768 1769 if (do_unlock) 1770 usbd_ctrl_unlock(res.udev); 1771 } 1772 done: 1773 bus_topo_unlock(); 1774 1775 return (0); 1776 } 1777 1778 /* 1779 * The USB Transaction Translator: 1780 * =============================== 1781 * 1782 * When doing LOW- and FULL-speed USB transfers across a HIGH-speed 1783 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1784 * USB transfers. To utilize bandwidth dynamically the "scatter and 1785 * gather" principle must be applied. This means that bandwidth must 1786 * be divided into equal parts of bandwidth. With regard to USB all 1787 * data is transferred in smaller packets with length 1788 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1789 * not a constant! 1790 * 1791 * The bandwidth scheduler which I have implemented will simply pack 1792 * the USB transfers back to back until there is no more space in the 1793 * schedule. Out of the 8 microframes which the USB 2.0 standard 1794 * provides, only 6 are available for non-HIGH-speed devices. I have 1795 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1796 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1797 * this division, it is very difficult to allocate and free bandwidth 1798 * dynamically. 1799 * 1800 * NOTE about the Transaction Translator in USB HUBs: 1801 * 1802 * USB HUBs have a very simple Transaction Translator, that will 1803 * simply pipeline all the SPLIT transactions. That means that the 1804 * transactions will be executed in the order they are queued! 1805 * 1806 */ 1807 1808 /*------------------------------------------------------------------------* 1809 * usb_intr_find_best_slot 1810 * 1811 * Return value: 1812 * The best Transaction Translation slot for an interrupt endpoint. 1813 *------------------------------------------------------------------------*/ 1814 static uint8_t 1815 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1816 uint8_t end, uint8_t mask) 1817 { 1818 usb_size_t min = (usb_size_t)-1; 1819 usb_size_t sum; 1820 uint8_t x; 1821 uint8_t y; 1822 uint8_t z; 1823 1824 y = 0; 1825 1826 /* find the last slot with lesser used bandwidth */ 1827 1828 for (x = start; x < end; x++) { 1829 sum = 0; 1830 1831 /* compute sum of bandwidth */ 1832 for (z = x; z < end; z++) { 1833 if (mask & (1U << (z - x))) 1834 sum += ptr[z]; 1835 } 1836 1837 /* check if the current multi-slot is more optimal */ 1838 if (min >= sum) { 1839 min = sum; 1840 y = x; 1841 } 1842 1843 /* check if the mask is about to be shifted out */ 1844 if (mask & (1U << (end - 1 - x))) 1845 break; 1846 } 1847 return (y); 1848 } 1849 1850 /*------------------------------------------------------------------------* 1851 * usb_hs_bandwidth_adjust 1852 * 1853 * This function will update the bandwidth usage for the microframe 1854 * having index "slot" by "len" bytes. "len" can be negative. If the 1855 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1856 * the "slot" argument will be replaced by the slot having least used 1857 * bandwidth. The "mask" argument is used for multi-slot allocations. 1858 * 1859 * Returns: 1860 * The slot in which the bandwidth update was done: 0..7 1861 *------------------------------------------------------------------------*/ 1862 static uint8_t 1863 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1864 uint8_t slot, uint8_t mask) 1865 { 1866 struct usb_bus *bus = udev->bus; 1867 struct usb_hub *hub; 1868 enum usb_dev_speed speed; 1869 uint8_t x; 1870 1871 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 1872 1873 speed = usbd_get_speed(udev); 1874 1875 switch (speed) { 1876 case USB_SPEED_LOW: 1877 case USB_SPEED_FULL: 1878 if (speed == USB_SPEED_LOW) { 1879 len *= 8; 1880 } 1881 /* 1882 * The Host Controller Driver should have 1883 * performed checks so that the lookup 1884 * below does not result in a NULL pointer 1885 * access. 1886 */ 1887 1888 hub = udev->parent_hs_hub->hub; 1889 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1890 slot = usb_intr_find_best_slot(hub->uframe_usage, 1891 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1892 } 1893 for (x = slot; x < 8; x++) { 1894 if (mask & (1U << (x - slot))) { 1895 hub->uframe_usage[x] += len; 1896 bus->uframe_usage[x] += len; 1897 } 1898 } 1899 break; 1900 default: 1901 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1902 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1903 USB_HS_MICRO_FRAMES_MAX, mask); 1904 } 1905 for (x = slot; x < 8; x++) { 1906 if (mask & (1U << (x - slot))) { 1907 bus->uframe_usage[x] += len; 1908 } 1909 } 1910 break; 1911 } 1912 return (slot); 1913 } 1914 1915 /*------------------------------------------------------------------------* 1916 * usb_hs_bandwidth_alloc 1917 * 1918 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1919 *------------------------------------------------------------------------*/ 1920 void 1921 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1922 { 1923 struct usb_device *udev; 1924 uint8_t slot; 1925 uint8_t mask; 1926 uint8_t speed; 1927 1928 udev = xfer->xroot->udev; 1929 1930 if (udev->flags.usb_mode != USB_MODE_HOST) 1931 return; /* not supported */ 1932 1933 xfer->endpoint->refcount_bw++; 1934 if (xfer->endpoint->refcount_bw != 1) 1935 return; /* already allocated */ 1936 1937 speed = usbd_get_speed(udev); 1938 1939 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1940 case UE_INTERRUPT: 1941 /* allocate a microframe slot */ 1942 1943 mask = 0x01; 1944 slot = usb_hs_bandwidth_adjust(udev, 1945 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1946 1947 xfer->endpoint->usb_uframe = slot; 1948 xfer->endpoint->usb_smask = mask << slot; 1949 1950 if ((speed != USB_SPEED_FULL) && 1951 (speed != USB_SPEED_LOW)) { 1952 xfer->endpoint->usb_cmask = 0x00 ; 1953 } else { 1954 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1955 } 1956 break; 1957 1958 case UE_ISOCHRONOUS: 1959 switch (usbd_xfer_get_fps_shift(xfer)) { 1960 case 0: 1961 mask = 0xFF; 1962 break; 1963 case 1: 1964 mask = 0x55; 1965 break; 1966 case 2: 1967 mask = 0x11; 1968 break; 1969 default: 1970 mask = 0x01; 1971 break; 1972 } 1973 1974 /* allocate a microframe multi-slot */ 1975 1976 slot = usb_hs_bandwidth_adjust(udev, 1977 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1978 1979 xfer->endpoint->usb_uframe = slot; 1980 xfer->endpoint->usb_cmask = 0; 1981 xfer->endpoint->usb_smask = mask << slot; 1982 break; 1983 1984 default: 1985 xfer->endpoint->usb_uframe = 0; 1986 xfer->endpoint->usb_cmask = 0; 1987 xfer->endpoint->usb_smask = 0; 1988 break; 1989 } 1990 1991 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1992 xfer->endpoint->usb_uframe, 1993 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1994 } 1995 1996 /*------------------------------------------------------------------------* 1997 * usb_hs_bandwidth_free 1998 * 1999 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 2000 *------------------------------------------------------------------------*/ 2001 void 2002 usb_hs_bandwidth_free(struct usb_xfer *xfer) 2003 { 2004 struct usb_device *udev; 2005 uint8_t slot; 2006 uint8_t mask; 2007 2008 udev = xfer->xroot->udev; 2009 2010 if (udev->flags.usb_mode != USB_MODE_HOST) 2011 return; /* not supported */ 2012 2013 xfer->endpoint->refcount_bw--; 2014 if (xfer->endpoint->refcount_bw != 0) 2015 return; /* still allocated */ 2016 2017 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 2018 case UE_INTERRUPT: 2019 case UE_ISOCHRONOUS: 2020 2021 slot = xfer->endpoint->usb_uframe; 2022 mask = xfer->endpoint->usb_smask; 2023 2024 /* free microframe slot(s): */ 2025 usb_hs_bandwidth_adjust(udev, 2026 -xfer->max_frame_size, slot, mask >> slot); 2027 2028 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 2029 slot, mask >> slot); 2030 2031 xfer->endpoint->usb_uframe = 0; 2032 xfer->endpoint->usb_cmask = 0; 2033 xfer->endpoint->usb_smask = 0; 2034 break; 2035 2036 default: 2037 break; 2038 } 2039 } 2040 2041 /*------------------------------------------------------------------------* 2042 * usb_isoc_time_expand 2043 * 2044 * This function will expand the time counter from 7-bit to 16-bit. 2045 * 2046 * Returns: 2047 * 16-bit isochronous time counter. 2048 *------------------------------------------------------------------------*/ 2049 uint16_t 2050 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 2051 { 2052 uint16_t rem; 2053 2054 USB_BUS_LOCK_ASSERT(bus, MA_OWNED); 2055 2056 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 2057 2058 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 2059 2060 if (isoc_time_curr < rem) { 2061 /* the time counter wrapped around */ 2062 bus->isoc_time_last += USB_ISOC_TIME_MAX; 2063 } 2064 /* update the remainder */ 2065 2066 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 2067 bus->isoc_time_last |= isoc_time_curr; 2068 2069 return (bus->isoc_time_last); 2070 } 2071 2072 /*------------------------------------------------------------------------* 2073 * usbd_fs_isoc_schedule_alloc_slot 2074 * 2075 * This function will allocate bandwidth for an isochronous FULL speed 2076 * transaction in the FULL speed schedule. 2077 * 2078 * Returns: 2079 * <8: Success 2080 * Else: Error 2081 *------------------------------------------------------------------------*/ 2082 #if USB_HAVE_TT_SUPPORT 2083 uint8_t 2084 usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time) 2085 { 2086 struct usb_xfer *xfer; 2087 struct usb_xfer *pipe_xfer; 2088 struct usb_bus *bus; 2089 usb_frlength_t len; 2090 usb_frlength_t data_len; 2091 uint16_t delta; 2092 uint16_t slot; 2093 uint8_t retval; 2094 2095 data_len = 0; 2096 slot = 0; 2097 2098 bus = isoc_xfer->xroot->bus; 2099 2100 TAILQ_FOREACH(xfer, &bus->intr_q.head, wait_entry) { 2101 /* skip self, if any */ 2102 2103 if (xfer == isoc_xfer) 2104 continue; 2105 2106 /* check if this USB transfer is going through the same TT */ 2107 2108 if (xfer->xroot->udev->parent_hs_hub != 2109 isoc_xfer->xroot->udev->parent_hs_hub) { 2110 continue; 2111 } 2112 if ((isoc_xfer->xroot->udev->parent_hs_hub-> 2113 ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) && 2114 (xfer->xroot->udev->hs_port_no != 2115 isoc_xfer->xroot->udev->hs_port_no)) { 2116 continue; 2117 } 2118 if (xfer->endpoint->methods != isoc_xfer->endpoint->methods) 2119 continue; 2120 2121 /* check if isoc_time is part of this transfer */ 2122 2123 delta = xfer->isoc_time_complete - isoc_time; 2124 if (delta > 0 && delta <= xfer->nframes) { 2125 delta = xfer->nframes - delta; 2126 2127 len = xfer->frlengths[delta]; 2128 len += 8; 2129 len *= 7; 2130 len /= 6; 2131 2132 data_len += len; 2133 } 2134 2135 /* 2136 * Check double buffered transfers. Only stream ID 2137 * equal to zero is valid here! 2138 */ 2139 TAILQ_FOREACH(pipe_xfer, &xfer->endpoint->endpoint_q[0].head, 2140 wait_entry) { 2141 /* skip self, if any */ 2142 2143 if (pipe_xfer == isoc_xfer) 2144 continue; 2145 2146 /* check if isoc_time is part of this transfer */ 2147 2148 delta = pipe_xfer->isoc_time_complete - isoc_time; 2149 if (delta > 0 && delta <= pipe_xfer->nframes) { 2150 delta = pipe_xfer->nframes - delta; 2151 2152 len = pipe_xfer->frlengths[delta]; 2153 len += 8; 2154 len *= 7; 2155 len /= 6; 2156 2157 data_len += len; 2158 } 2159 } 2160 } 2161 2162 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 2163 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 2164 slot++; 2165 } 2166 2167 /* check for overflow */ 2168 2169 if (slot >= USB_FS_ISOC_UFRAME_MAX) 2170 return (255); 2171 2172 retval = slot; 2173 2174 delta = isoc_xfer->isoc_time_complete - isoc_time; 2175 if (delta > 0 && delta <= isoc_xfer->nframes) { 2176 delta = isoc_xfer->nframes - delta; 2177 2178 len = isoc_xfer->frlengths[delta]; 2179 len += 8; 2180 len *= 7; 2181 len /= 6; 2182 2183 data_len += len; 2184 } 2185 2186 while (data_len >= USB_FS_BYTES_PER_HS_UFRAME) { 2187 data_len -= USB_FS_BYTES_PER_HS_UFRAME; 2188 slot++; 2189 } 2190 2191 /* check for overflow */ 2192 2193 if (slot >= USB_FS_ISOC_UFRAME_MAX) 2194 return (255); 2195 2196 return (retval); 2197 } 2198 #endif 2199 2200 /*------------------------------------------------------------------------* 2201 * usb_bus_port_get_device 2202 * 2203 * This function is NULL safe. 2204 *------------------------------------------------------------------------*/ 2205 struct usb_device * 2206 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 2207 { 2208 if ((bus == NULL) || (up == NULL)) { 2209 /* be NULL safe */ 2210 return (NULL); 2211 } 2212 if (up->device_index == 0) { 2213 /* nothing to do */ 2214 return (NULL); 2215 } 2216 return (bus->devices[up->device_index]); 2217 } 2218 2219 /*------------------------------------------------------------------------* 2220 * usb_bus_port_set_device 2221 * 2222 * This function is NULL safe. 2223 *------------------------------------------------------------------------*/ 2224 void 2225 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 2226 struct usb_device *udev, uint8_t device_index) 2227 { 2228 if (bus == NULL) { 2229 /* be NULL safe */ 2230 return; 2231 } 2232 /* 2233 * There is only one case where we don't 2234 * have an USB port, and that is the Root Hub! 2235 */ 2236 if (up) { 2237 if (udev) { 2238 up->device_index = device_index; 2239 } else { 2240 device_index = up->device_index; 2241 up->device_index = 0; 2242 } 2243 } 2244 /* 2245 * Make relationships to our new device 2246 */ 2247 if (device_index != 0) { 2248 #if USB_HAVE_UGEN 2249 mtx_lock(&usb_ref_lock); 2250 #endif 2251 bus->devices[device_index] = udev; 2252 #if USB_HAVE_UGEN 2253 mtx_unlock(&usb_ref_lock); 2254 #endif 2255 } 2256 /* 2257 * Debug print 2258 */ 2259 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 2260 } 2261 2262 /*------------------------------------------------------------------------* 2263 * usb_needs_explore 2264 * 2265 * This functions is called when the USB event thread needs to run. 2266 *------------------------------------------------------------------------*/ 2267 void 2268 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 2269 { 2270 uint8_t do_unlock; 2271 2272 DPRINTF("\n"); 2273 2274 if (cold != 0) { 2275 DPRINTF("Cold\n"); 2276 return; 2277 } 2278 2279 if (bus == NULL) { 2280 DPRINTF("No bus pointer!\n"); 2281 return; 2282 } 2283 if ((bus->devices == NULL) || 2284 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 2285 DPRINTF("No root HUB\n"); 2286 return; 2287 } 2288 if (mtx_owned(&bus->bus_mtx)) { 2289 do_unlock = 0; 2290 } else { 2291 USB_BUS_LOCK(bus); 2292 do_unlock = 1; 2293 } 2294 if (do_probe) { 2295 bus->do_probe = 1; 2296 } 2297 if (usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 2298 &bus->explore_msg[0], &bus->explore_msg[1])) { 2299 /* ignore */ 2300 } 2301 if (do_unlock) { 2302 USB_BUS_UNLOCK(bus); 2303 } 2304 } 2305 2306 /*------------------------------------------------------------------------* 2307 * usb_needs_explore_all 2308 * 2309 * This function is called whenever a new driver is loaded and will 2310 * cause that all USB buses are re-explored. 2311 *------------------------------------------------------------------------*/ 2312 void 2313 usb_needs_explore_all(void) 2314 { 2315 struct usb_bus *bus; 2316 devclass_t dc; 2317 device_t dev; 2318 int max; 2319 2320 DPRINTFN(3, "\n"); 2321 2322 dc = usb_devclass_ptr; 2323 if (dc == NULL) { 2324 DPRINTFN(0, "no devclass\n"); 2325 return; 2326 } 2327 /* 2328 * Explore all USB buses in parallel. 2329 */ 2330 max = devclass_get_maxunit(dc); 2331 while (max >= 0) { 2332 dev = devclass_get_device(dc, max); 2333 if (dev) { 2334 bus = device_get_softc(dev); 2335 if (bus) { 2336 usb_needs_explore(bus, 1); 2337 } 2338 } 2339 max--; 2340 } 2341 } 2342 2343 /*------------------------------------------------------------------------* 2344 * usb_needs_explore_init 2345 * 2346 * This function will ensure that the USB controllers are not enumerated 2347 * until the "cold" variable is cleared. 2348 *------------------------------------------------------------------------*/ 2349 static void 2350 usb_needs_explore_init(void *arg) 2351 { 2352 /* 2353 * The cold variable should be cleared prior to this function 2354 * being called: 2355 */ 2356 if (cold == 0) 2357 usb_needs_explore_all(); 2358 else 2359 DPRINTFN(-1, "Cold variable is still set!\n"); 2360 } 2361 SYSINIT(usb_needs_explore_init, SI_SUB_KICK_SCHEDULER, SI_ORDER_SECOND, usb_needs_explore_init, NULL); 2362 2363 /*------------------------------------------------------------------------* 2364 * usb_bus_power_update 2365 * 2366 * This function will ensure that all USB devices on the given bus are 2367 * properly suspended or resumed according to the device transfer 2368 * state. 2369 *------------------------------------------------------------------------*/ 2370 #if USB_HAVE_POWERD 2371 void 2372 usb_bus_power_update(struct usb_bus *bus) 2373 { 2374 usb_needs_explore(bus, 0 /* no probe */ ); 2375 } 2376 #endif 2377 2378 /*------------------------------------------------------------------------* 2379 * usbd_transfer_power_ref 2380 * 2381 * This function will modify the power save reference counts and 2382 * wakeup the USB device associated with the given USB transfer, if 2383 * needed. 2384 *------------------------------------------------------------------------*/ 2385 #if USB_HAVE_POWERD 2386 void 2387 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 2388 { 2389 static const usb_power_mask_t power_mask[4] = { 2390 [UE_CONTROL] = USB_HW_POWER_CONTROL, 2391 [UE_BULK] = USB_HW_POWER_BULK, 2392 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 2393 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 2394 }; 2395 struct usb_device *udev; 2396 uint8_t needs_explore; 2397 uint8_t needs_hw_power; 2398 uint8_t xfer_type; 2399 2400 udev = xfer->xroot->udev; 2401 2402 if (udev->device_index == USB_ROOT_HUB_ADDR) { 2403 /* no power save for root HUB */ 2404 return; 2405 } 2406 USB_BUS_LOCK(udev->bus); 2407 2408 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 2409 2410 udev->pwr_save.last_xfer_time = ticks; 2411 udev->pwr_save.type_refs[xfer_type] += val; 2412 2413 if (xfer->flags_int.control_xfr) { 2414 udev->pwr_save.read_refs += val; 2415 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 2416 /* 2417 * It is not allowed to suspend during a 2418 * control transfer: 2419 */ 2420 udev->pwr_save.write_refs += val; 2421 } 2422 } else if (USB_GET_DATA_ISREAD(xfer)) { 2423 udev->pwr_save.read_refs += val; 2424 } else { 2425 udev->pwr_save.write_refs += val; 2426 } 2427 2428 if (val > 0) { 2429 if (udev->flags.self_suspended) 2430 needs_explore = usb_peer_should_wakeup(udev); 2431 else 2432 needs_explore = 0; 2433 2434 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2435 DPRINTF("Adding type %u to power state\n", xfer_type); 2436 udev->bus->hw_power_state |= power_mask[xfer_type]; 2437 needs_hw_power = 1; 2438 } else { 2439 needs_hw_power = 0; 2440 } 2441 } else { 2442 needs_explore = 0; 2443 needs_hw_power = 0; 2444 } 2445 2446 USB_BUS_UNLOCK(udev->bus); 2447 2448 if (needs_explore) { 2449 DPRINTF("update\n"); 2450 usb_bus_power_update(udev->bus); 2451 } else if (needs_hw_power) { 2452 DPRINTF("needs power\n"); 2453 if (udev->bus->methods->set_hw_power != NULL) { 2454 (udev->bus->methods->set_hw_power) (udev->bus); 2455 } 2456 } 2457 } 2458 #endif 2459 2460 /*------------------------------------------------------------------------* 2461 * usb_peer_should_wakeup 2462 * 2463 * This function returns non-zero if the current device should wake up. 2464 *------------------------------------------------------------------------*/ 2465 static uint8_t 2466 usb_peer_should_wakeup(struct usb_device *udev) 2467 { 2468 return (((udev->power_mode == USB_POWER_MODE_ON) && 2469 (udev->flags.usb_mode == USB_MODE_HOST)) || 2470 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2471 (udev->re_enumerate_wait != USB_RE_ENUM_DONE) || 2472 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2473 (udev->pwr_save.write_refs != 0) || 2474 ((udev->pwr_save.read_refs != 0) && 2475 (udev->flags.usb_mode == USB_MODE_HOST) && 2476 (usb_peer_can_wakeup(udev) == 0))); 2477 } 2478 2479 /*------------------------------------------------------------------------* 2480 * usb_bus_powerd 2481 * 2482 * This function implements the USB power daemon and is called 2483 * regularly from the USB explore thread. 2484 *------------------------------------------------------------------------*/ 2485 #if USB_HAVE_POWERD 2486 void 2487 usb_bus_powerd(struct usb_bus *bus) 2488 { 2489 struct usb_device *udev; 2490 usb_ticks_t temp; 2491 usb_ticks_t limit; 2492 usb_ticks_t mintime; 2493 usb_size_t type_refs[5]; 2494 uint8_t x; 2495 2496 limit = usb_power_timeout; 2497 if (limit == 0) 2498 limit = hz; 2499 else if (limit > 255) 2500 limit = 255 * hz; 2501 else 2502 limit = limit * hz; 2503 2504 DPRINTF("bus=%p\n", bus); 2505 2506 USB_BUS_LOCK(bus); 2507 2508 /* 2509 * The root HUB device is never suspended 2510 * and we simply skip it. 2511 */ 2512 for (x = USB_ROOT_HUB_ADDR + 1; 2513 x != bus->devices_max; x++) { 2514 udev = bus->devices[x]; 2515 if (udev == NULL) 2516 continue; 2517 2518 temp = ticks - udev->pwr_save.last_xfer_time; 2519 2520 if (usb_peer_should_wakeup(udev)) { 2521 /* check if we are suspended */ 2522 if (udev->flags.self_suspended != 0) { 2523 USB_BUS_UNLOCK(bus); 2524 usb_dev_resume_peer(udev); 2525 USB_BUS_LOCK(bus); 2526 } 2527 } else if ((temp >= limit) && 2528 (udev->flags.usb_mode == USB_MODE_HOST) && 2529 (udev->flags.self_suspended == 0)) { 2530 /* try to do suspend */ 2531 2532 USB_BUS_UNLOCK(bus); 2533 usb_dev_suspend_peer(udev); 2534 USB_BUS_LOCK(bus); 2535 } 2536 } 2537 2538 /* reset counters */ 2539 2540 mintime = (usb_ticks_t)-1; 2541 type_refs[0] = 0; 2542 type_refs[1] = 0; 2543 type_refs[2] = 0; 2544 type_refs[3] = 0; 2545 type_refs[4] = 0; 2546 2547 /* Re-loop all the devices to get the actual state */ 2548 2549 for (x = USB_ROOT_HUB_ADDR + 1; 2550 x != bus->devices_max; x++) { 2551 udev = bus->devices[x]; 2552 if (udev == NULL) 2553 continue; 2554 2555 /* we found a non-Root-Hub USB device */ 2556 type_refs[4] += 1; 2557 2558 /* "last_xfer_time" can be updated by a resume */ 2559 temp = ticks - udev->pwr_save.last_xfer_time; 2560 2561 /* 2562 * Compute minimum time since last transfer for the complete 2563 * bus: 2564 */ 2565 if (temp < mintime) 2566 mintime = temp; 2567 2568 if (udev->flags.self_suspended == 0) { 2569 type_refs[0] += udev->pwr_save.type_refs[0]; 2570 type_refs[1] += udev->pwr_save.type_refs[1]; 2571 type_refs[2] += udev->pwr_save.type_refs[2]; 2572 type_refs[3] += udev->pwr_save.type_refs[3]; 2573 } 2574 } 2575 2576 if (mintime >= (usb_ticks_t)(1 * hz)) { 2577 /* recompute power masks */ 2578 DPRINTF("Recomputing power masks\n"); 2579 bus->hw_power_state = 0; 2580 if (type_refs[UE_CONTROL] != 0) 2581 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2582 if (type_refs[UE_BULK] != 0) 2583 bus->hw_power_state |= USB_HW_POWER_BULK; 2584 if (type_refs[UE_INTERRUPT] != 0) 2585 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2586 if (type_refs[UE_ISOCHRONOUS] != 0) 2587 bus->hw_power_state |= USB_HW_POWER_ISOC; 2588 if (type_refs[4] != 0) 2589 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2590 } 2591 USB_BUS_UNLOCK(bus); 2592 2593 if (bus->methods->set_hw_power != NULL) { 2594 /* always update hardware power! */ 2595 (bus->methods->set_hw_power) (bus); 2596 } 2597 return; 2598 } 2599 #endif 2600 2601 static usb_error_t 2602 usbd_device_30_remote_wakeup(struct usb_device *udev, uint8_t bRequest) 2603 { 2604 struct usb_device_request req = {}; 2605 2606 req.bmRequestType = UT_WRITE_INTERFACE; 2607 req.bRequest = bRequest; 2608 USETW(req.wValue, USB_INTERFACE_FUNC_SUSPEND); 2609 USETW(req.wIndex, USB_INTERFACE_FUNC_SUSPEND_LP | 2610 USB_INTERFACE_FUNC_SUSPEND_RW); 2611 2612 return (usbd_do_request(udev, NULL, &req, 0)); 2613 } 2614 2615 static usb_error_t 2616 usbd_clear_dev_wakeup(struct usb_device *udev) 2617 { 2618 usb_error_t err; 2619 2620 if (usb_device_20_compatible(udev)) { 2621 err = usbd_req_clear_device_feature(udev, 2622 NULL, UF_DEVICE_REMOTE_WAKEUP); 2623 } else { 2624 err = usbd_device_30_remote_wakeup(udev, 2625 UR_CLEAR_FEATURE); 2626 } 2627 return (err); 2628 } 2629 2630 static usb_error_t 2631 usbd_set_dev_wakeup(struct usb_device *udev) 2632 { 2633 usb_error_t err; 2634 2635 if (usb_device_20_compatible(udev)) { 2636 err = usbd_req_set_device_feature(udev, 2637 NULL, UF_DEVICE_REMOTE_WAKEUP); 2638 } else { 2639 err = usbd_device_30_remote_wakeup(udev, 2640 UR_SET_FEATURE); 2641 } 2642 return (err); 2643 } 2644 2645 /*------------------------------------------------------------------------* 2646 * usb_dev_resume_peer 2647 * 2648 * This function will resume an USB peer and do the required USB 2649 * signalling to get an USB device out of the suspended state. 2650 *------------------------------------------------------------------------*/ 2651 static void 2652 usb_dev_resume_peer(struct usb_device *udev) 2653 { 2654 struct usb_bus *bus; 2655 int err; 2656 2657 /* be NULL safe */ 2658 if (udev == NULL) 2659 return; 2660 2661 /* check if already resumed */ 2662 if (udev->flags.self_suspended == 0) 2663 return; 2664 2665 /* we need a parent HUB to do resume */ 2666 if (udev->parent_hub == NULL) 2667 return; 2668 2669 DPRINTF("udev=%p\n", udev); 2670 2671 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2672 (udev->flags.remote_wakeup == 0)) { 2673 /* 2674 * If the host did not set the remote wakeup feature, we can 2675 * not wake it up either! 2676 */ 2677 DPRINTF("remote wakeup is not set!\n"); 2678 return; 2679 } 2680 /* get bus pointer */ 2681 bus = udev->bus; 2682 2683 /* resume parent hub first */ 2684 usb_dev_resume_peer(udev->parent_hub); 2685 2686 /* reduce chance of instant resume failure by waiting a little bit */ 2687 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2688 2689 if (usb_device_20_compatible(udev)) { 2690 /* resume current port (Valid in Host and Device Mode) */ 2691 err = usbd_req_clear_port_feature(udev->parent_hub, 2692 NULL, udev->port_no, UHF_PORT_SUSPEND); 2693 } else { 2694 /* resume current port (Valid in Host and Device Mode) */ 2695 err = usbd_req_set_port_link_state(udev->parent_hub, 2696 NULL, udev->port_no, UPS_PORT_LS_U0); 2697 } 2698 2699 if (err != 0) { 2700 DPRINTFN(0, "Resuming port failed: %s (ignored)\n", 2701 usbd_errstr(err)); 2702 } 2703 2704 /* resume settle time */ 2705 usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); 2706 2707 if (bus->methods->device_resume != NULL) { 2708 /* resume USB device on the USB controller */ 2709 (bus->methods->device_resume) (udev); 2710 } 2711 USB_BUS_LOCK(bus); 2712 /* set that this device is now resumed */ 2713 udev->flags.self_suspended = 0; 2714 #if USB_HAVE_POWERD 2715 /* make sure that we don't go into suspend right away */ 2716 udev->pwr_save.last_xfer_time = ticks; 2717 2718 /* make sure the needed power masks are on */ 2719 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2720 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2721 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2722 bus->hw_power_state |= USB_HW_POWER_BULK; 2723 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2724 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2725 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2726 bus->hw_power_state |= USB_HW_POWER_ISOC; 2727 #endif 2728 USB_BUS_UNLOCK(bus); 2729 2730 if (bus->methods->set_hw_power != NULL) { 2731 /* always update hardware power! */ 2732 (bus->methods->set_hw_power) (bus); 2733 } 2734 2735 usbd_sr_lock(udev); 2736 2737 /* notify all sub-devices about resume */ 2738 err = usb_suspend_resume(udev, 0); 2739 2740 usbd_sr_unlock(udev); 2741 2742 /* check if peer has wakeup capability */ 2743 if (usb_peer_can_wakeup(udev)) { 2744 /* clear remote wakeup */ 2745 err = usbd_clear_dev_wakeup(udev); 2746 if (err) { 2747 DPRINTFN(0, "Clearing device " 2748 "remote wakeup failed: %s\n", 2749 usbd_errstr(err)); 2750 } 2751 } 2752 } 2753 2754 /*------------------------------------------------------------------------* 2755 * usb_dev_suspend_peer 2756 * 2757 * This function will suspend an USB peer and do the required USB 2758 * signalling to get an USB device into the suspended state. 2759 *------------------------------------------------------------------------*/ 2760 static void 2761 usb_dev_suspend_peer(struct usb_device *udev) 2762 { 2763 struct usb_device *child; 2764 int err; 2765 uint8_t x; 2766 uint8_t nports; 2767 2768 repeat: 2769 /* be NULL safe */ 2770 if (udev == NULL) 2771 return; 2772 2773 /* check if already suspended */ 2774 if (udev->flags.self_suspended) 2775 return; 2776 2777 /* we need a parent HUB to do suspend */ 2778 if (udev->parent_hub == NULL) 2779 return; 2780 2781 DPRINTF("udev=%p\n", udev); 2782 2783 /* check if the current device is a HUB */ 2784 if (udev->hub != NULL) { 2785 nports = udev->hub->nports; 2786 2787 /* check if all devices on the HUB are suspended */ 2788 for (x = 0; x != nports; x++) { 2789 child = usb_bus_port_get_device(udev->bus, 2790 udev->hub->ports + x); 2791 2792 if (child == NULL) 2793 continue; 2794 2795 if (child->flags.self_suspended) 2796 continue; 2797 2798 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2799 return; 2800 } 2801 } 2802 2803 if (usb_peer_can_wakeup(udev)) { 2804 /* 2805 * This request needs to be done before we set 2806 * "udev->flags.self_suspended": 2807 */ 2808 2809 /* allow device to do remote wakeup */ 2810 err = usbd_set_dev_wakeup(udev); 2811 if (err) { 2812 DPRINTFN(0, "Setting device " 2813 "remote wakeup failed\n"); 2814 } 2815 } 2816 2817 USB_BUS_LOCK(udev->bus); 2818 /* 2819 * Checking for suspend condition and setting suspended bit 2820 * must be atomic! 2821 */ 2822 err = usb_peer_should_wakeup(udev); 2823 if (err == 0) { 2824 /* 2825 * Set that this device is suspended. This variable 2826 * must be set before calling USB controller suspend 2827 * callbacks. 2828 */ 2829 udev->flags.self_suspended = 1; 2830 } 2831 USB_BUS_UNLOCK(udev->bus); 2832 2833 if (err != 0) { 2834 if (usb_peer_can_wakeup(udev)) { 2835 /* allow device to do remote wakeup */ 2836 err = usbd_clear_dev_wakeup(udev); 2837 if (err) { 2838 DPRINTFN(0, "Setting device " 2839 "remote wakeup failed\n"); 2840 } 2841 } 2842 2843 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2844 /* resume parent HUB first */ 2845 usb_dev_resume_peer(udev->parent_hub); 2846 2847 /* reduce chance of instant resume failure by waiting a little bit */ 2848 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2849 2850 /* resume current port (Valid in Host and Device Mode) */ 2851 err = usbd_req_clear_port_feature(udev->parent_hub, 2852 NULL, udev->port_no, UHF_PORT_SUSPEND); 2853 2854 /* resume settle time */ 2855 usb_pause_mtx(NULL, USB_MS_TO_TICKS(usb_port_resume_delay)); 2856 } 2857 DPRINTF("Suspend was cancelled!\n"); 2858 return; 2859 } 2860 2861 usbd_sr_lock(udev); 2862 2863 /* notify all sub-devices about suspend */ 2864 err = usb_suspend_resume(udev, 1); 2865 2866 usbd_sr_unlock(udev); 2867 2868 if (udev->bus->methods->device_suspend != NULL) { 2869 usb_timeout_t temp; 2870 2871 /* suspend device on the USB controller */ 2872 (udev->bus->methods->device_suspend) (udev); 2873 2874 /* do DMA delay */ 2875 temp = usbd_get_dma_delay(udev); 2876 if (temp != 0) 2877 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2878 } 2879 2880 if (usb_device_20_compatible(udev)) { 2881 /* suspend current port */ 2882 err = usbd_req_set_port_feature(udev->parent_hub, 2883 NULL, udev->port_no, UHF_PORT_SUSPEND); 2884 if (err) { 2885 DPRINTFN(0, "Suspending port failed\n"); 2886 return; 2887 } 2888 } else { 2889 /* suspend current port */ 2890 err = usbd_req_set_port_link_state(udev->parent_hub, 2891 NULL, udev->port_no, UPS_PORT_LS_U3); 2892 if (err) { 2893 DPRINTFN(0, "Suspending port failed\n"); 2894 return; 2895 } 2896 } 2897 2898 udev = udev->parent_hub; 2899 goto repeat; 2900 } 2901 2902 /*------------------------------------------------------------------------* 2903 * usbd_set_power_mode 2904 * 2905 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2906 * USB device. 2907 *------------------------------------------------------------------------*/ 2908 void 2909 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2910 { 2911 /* filter input argument */ 2912 if ((power_mode != USB_POWER_MODE_ON) && 2913 (power_mode != USB_POWER_MODE_OFF)) 2914 power_mode = USB_POWER_MODE_SAVE; 2915 2916 power_mode = usbd_filter_power_mode(udev, power_mode); 2917 2918 udev->power_mode = power_mode; /* update copy of power mode */ 2919 2920 #if USB_HAVE_POWERD 2921 usb_bus_power_update(udev->bus); 2922 #else 2923 usb_needs_explore(udev->bus, 0 /* no probe */ ); 2924 #endif 2925 } 2926 2927 /*------------------------------------------------------------------------* 2928 * usbd_filter_power_mode 2929 * 2930 * This function filters the power mode based on hardware requirements. 2931 *------------------------------------------------------------------------*/ 2932 uint8_t 2933 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2934 { 2935 const struct usb_bus_methods *mtod; 2936 int8_t temp; 2937 2938 mtod = udev->bus->methods; 2939 temp = -1; 2940 2941 if (mtod->get_power_mode != NULL) 2942 (mtod->get_power_mode) (udev, &temp); 2943 2944 /* check if we should not filter */ 2945 if (temp < 0) 2946 return (power_mode); 2947 2948 /* use fixed power mode given by hardware driver */ 2949 return (temp); 2950 } 2951 2952 /*------------------------------------------------------------------------* 2953 * usbd_start_re_enumerate 2954 * 2955 * This function starts re-enumeration of the given USB device. This 2956 * function does not need to be called BUS-locked. This function does 2957 * not wait until the re-enumeration is completed. 2958 *------------------------------------------------------------------------*/ 2959 void 2960 usbd_start_re_enumerate(struct usb_device *udev) 2961 { 2962 if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { 2963 udev->re_enumerate_wait = USB_RE_ENUM_START; 2964 usb_needs_explore(udev->bus, 0); 2965 } 2966 } 2967 2968 /*-----------------------------------------------------------------------* 2969 * usbd_start_set_config 2970 * 2971 * This function starts setting a USB configuration. This function 2972 * does not need to be called BUS-locked. This function does not wait 2973 * until the set USB configuratino is completed. 2974 *------------------------------------------------------------------------*/ 2975 usb_error_t 2976 usbd_start_set_config(struct usb_device *udev, uint8_t index) 2977 { 2978 if (udev->re_enumerate_wait == USB_RE_ENUM_DONE) { 2979 if (udev->curr_config_index == index) { 2980 /* no change needed */ 2981 return (0); 2982 } 2983 udev->next_config_index = index; 2984 udev->re_enumerate_wait = USB_RE_ENUM_SET_CONFIG; 2985 usb_needs_explore(udev->bus, 0); 2986 return (0); 2987 } else if (udev->re_enumerate_wait == USB_RE_ENUM_SET_CONFIG) { 2988 if (udev->next_config_index == index) { 2989 /* no change needed */ 2990 return (0); 2991 } 2992 } 2993 return (USB_ERR_PENDING_REQUESTS); 2994 } 2995