1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #ifndef _USB2_DEVICE_H_ 28 #define _USB2_DEVICE_H_ 29 30 struct usb2_symlink; /* UGEN */ 31 struct usb_device; /* linux compat */ 32 33 #define USB_DEFAULT_XFER_MAX 2 34 35 /* "usb2_parse_config()" commands */ 36 37 #define USB_CFG_ALLOC 0 38 #define USB_CFG_FREE 1 39 #define USB_CFG_INIT 2 40 41 /* "usb2_unconfigure()" flags */ 42 43 #define USB_UNCFG_FLAG_NONE 0x00 44 #define USB_UNCFG_FLAG_FREE_SUBDEV 0x01 /* subdevices are freed */ 45 #define USB_UNCFG_FLAG_FREE_EP0 0x02 /* endpoint zero is freed */ 46 47 struct usb2_clear_stall_msg { 48 struct usb2_proc_msg hdr; 49 struct usb2_device *udev; 50 }; 51 52 /* 53 * The following structure defines an USB pipe which is equal to an 54 * USB endpoint. 55 */ 56 struct usb2_pipe { 57 struct usb2_xfer_queue pipe_q; /* queue of USB transfers */ 58 59 struct usb2_endpoint_descriptor *edesc; 60 struct usb2_pipe_methods *methods; /* set by HC driver */ 61 62 uint16_t isoc_next; 63 uint16_t refcount; 64 65 uint8_t toggle_next:1; /* next data toggle value */ 66 uint8_t is_stalled:1; /* set if pipe is stalled */ 67 uint8_t is_synced:1; /* set if we a synchronised */ 68 uint8_t unused:5; 69 uint8_t iface_index; /* not used by "default pipe" */ 70 }; 71 72 /* 73 * The following structure defines an USB interface. 74 */ 75 struct usb2_interface { 76 struct usb2_interface_descriptor *idesc; 77 device_t subdev; 78 uint8_t alt_index; 79 uint8_t parent_iface_index; 80 }; 81 82 /* 83 * The following structure defines the USB device flags. 84 */ 85 struct usb2_device_flags { 86 uint8_t usb2_mode:1; /* USB mode (see USB_MODE_XXX) */ 87 uint8_t self_powered:1; /* set if USB device is self powered */ 88 uint8_t suspended:1; /* set if USB device is suspended */ 89 uint8_t no_strings:1; /* set if USB device does not support 90 * strings */ 91 uint8_t remote_wakeup:1; /* set if remote wakeup is enabled */ 92 uint8_t uq_bus_powered:1; /* set if BUS powered quirk is present */ 93 }; 94 95 /* 96 * The following structure is used for power-save purposes. The data 97 * in this structure is protected by the USB BUS lock. 98 */ 99 struct usb2_power_save { 100 usb2_ticks_t last_xfer_time; /* copy of "ticks" */ 101 usb2_size_t type_refs[4]; /* transfer reference count */ 102 usb2_size_t read_refs; /* data read references */ 103 usb2_size_t write_refs; /* data write references */ 104 uint8_t suspended; /* set if USB device is suspended */ 105 }; 106 107 /* 108 * The following structure defines an USB device. There exists one of 109 * these structures for every USB device. 110 */ 111 struct usb2_device { 112 struct usb2_clear_stall_msg cs_msg[2]; /* generic clear stall 113 * messages */ 114 struct sx default_sx[2]; 115 struct mtx default_mtx[1]; 116 struct cv default_cv[2]; 117 struct usb2_interface *ifaces; 118 struct usb2_pipe default_pipe; /* Control Endpoint 0 */ 119 struct usb2_pipe *pipes; 120 struct usb2_power_save pwr_save;/* power save data */ 121 struct usb2_bus *bus; /* our USB BUS */ 122 device_t parent_dev; /* parent device */ 123 struct usb2_device *parent_hub; 124 struct usb2_config_descriptor *cdesc; /* full config descr */ 125 struct usb2_hub *hub; /* only if this is a hub */ 126 #if USB_HAVE_COMPAT_LINUX 127 struct usb_device *linux_dev; 128 #endif 129 struct usb2_xfer *default_xfer[USB_DEFAULT_XFER_MAX]; 130 struct usb2_temp_data *usb2_template_ptr; 131 struct usb2_pipe *pipe_curr; /* current clear stall pipe */ 132 #if USB_HAVE_UGEN 133 struct usb2_fifo *fifo[USB_FIFO_MAX]; 134 struct usb2_symlink *ugen_symlink; /* our generic symlink */ 135 struct cdev *default_dev; /* Control Endpoint 0 device node */ 136 LIST_HEAD(,usb2_fs_privdata) pd_list; 137 char ugen_name[20]; /* name of ugenX.X device */ 138 #endif 139 usb2_ticks_t plugtime; /* copy of "ticks" */ 140 141 uint16_t refcount; 142 #define USB_DEV_REF_MAX 0xffff 143 144 uint16_t power; /* mA the device uses */ 145 uint16_t langid; /* language for strings */ 146 147 uint8_t address; /* device addess */ 148 uint8_t device_index; /* device index in "bus->devices" */ 149 uint8_t curr_config_index; /* current configuration index */ 150 uint8_t curr_config_no; /* current configuration number */ 151 uint8_t depth; /* distance from root HUB */ 152 uint8_t speed; /* low/full/high speed */ 153 uint8_t port_index; /* parent HUB port index */ 154 uint8_t port_no; /* parent HUB port number */ 155 uint8_t hs_hub_addr; /* high-speed HUB address */ 156 uint8_t hs_port_no; /* high-speed HUB port number */ 157 uint8_t driver_added_refcount; /* our driver added generation count */ 158 uint8_t power_mode; /* see USB_POWER_XXX */ 159 uint8_t ifaces_max; /* number of interfaces present */ 160 uint8_t pipes_max; /* number of pipes present */ 161 162 /* the "flags" field is write-protected by "bus->mtx" */ 163 164 struct usb2_device_flags flags; 165 166 struct usb2_endpoint_descriptor default_ep_desc; /* for pipe 0 */ 167 struct usb2_device_descriptor ddesc; /* device descriptor */ 168 169 #if USB_HAVE_STRINGS 170 char serial[64]; /* serial number */ 171 char manufacturer[64]; /* manufacturer string */ 172 char product[64]; /* product string */ 173 #endif 174 }; 175 176 /* globals */ 177 178 extern int usb2_template; 179 180 /* function prototypes */ 181 182 struct usb2_device *usb2_alloc_device(device_t parent_dev, struct usb2_bus *bus, 183 struct usb2_device *parent_hub, uint8_t depth, 184 uint8_t port_index, uint8_t port_no, uint8_t speed, 185 uint8_t usb2_mode); 186 struct usb2_pipe *usb2_get_pipe(struct usb2_device *udev, uint8_t iface_index, 187 const struct usb2_config *setup); 188 struct usb2_pipe *usb2_get_pipe_by_addr(struct usb2_device *udev, uint8_t ea_val); 189 usb2_error_t usb2_interface_count(struct usb2_device *udev, uint8_t *count); 190 usb2_error_t usb2_probe_and_attach(struct usb2_device *udev, 191 uint8_t iface_index); 192 usb2_error_t usb2_reset_iface_endpoints(struct usb2_device *udev, 193 uint8_t iface_index); 194 usb2_error_t usb2_set_config_index(struct usb2_device *udev, uint8_t index); 195 usb2_error_t usb2_set_endpoint_stall(struct usb2_device *udev, 196 struct usb2_pipe *pipe, uint8_t do_stall); 197 usb2_error_t usb2_suspend_resume(struct usb2_device *udev, 198 uint8_t do_suspend); 199 void usb2_devinfo(struct usb2_device *udev, char *dst_ptr, uint16_t dst_len); 200 void usb2_free_device(struct usb2_device *, uint8_t); 201 void *usb2_find_descriptor(struct usb2_device *udev, void *id, 202 uint8_t iface_index, uint8_t type, uint8_t type_mask, 203 uint8_t subtype, uint8_t subtype_mask); 204 void usb_linux_free_device(struct usb_device *dev); 205 uint8_t usb2_peer_can_wakeup(struct usb2_device *udev); 206 struct usb2_pipe *usb2_pipe_foreach(struct usb2_device *udev, struct usb2_pipe *pipe); 207 208 #endif /* _USB2_DEVICE_H_ */ 209