1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #include <sys/stdint.h> 28 #include <sys/stddef.h> 29 #include <sys/param.h> 30 #include <sys/queue.h> 31 #include <sys/types.h> 32 #include <sys/systm.h> 33 #include <sys/kernel.h> 34 #include <sys/bus.h> 35 #include <sys/module.h> 36 #include <sys/lock.h> 37 #include <sys/mutex.h> 38 #include <sys/condvar.h> 39 #include <sys/sysctl.h> 40 #include <sys/sx.h> 41 #include <sys/unistd.h> 42 #include <sys/callout.h> 43 #include <sys/malloc.h> 44 #include <sys/priv.h> 45 #include <sys/conf.h> 46 #include <sys/fcntl.h> 47 48 #include <dev/usb/usb.h> 49 #include <dev/usb/usbdi.h> 50 #include <dev/usb/usbdi_util.h> 51 #include <dev/usb/usb_ioctl.h> 52 53 #if USB_HAVE_UGEN 54 #include <sys/sbuf.h> 55 #endif 56 57 #include "usbdevs.h" 58 59 #define USB_DEBUG_VAR usb_debug 60 61 #include <dev/usb/usb_core.h> 62 #include <dev/usb/usb_debug.h> 63 #include <dev/usb/usb_process.h> 64 #include <dev/usb/usb_device.h> 65 #include <dev/usb/usb_busdma.h> 66 #include <dev/usb/usb_transfer.h> 67 #include <dev/usb/usb_request.h> 68 #include <dev/usb/usb_dynamic.h> 69 #include <dev/usb/usb_hub.h> 70 #include <dev/usb/usb_util.h> 71 #include <dev/usb/usb_msctest.h> 72 #if USB_HAVE_UGEN 73 #include <dev/usb/usb_dev.h> 74 #include <dev/usb/usb_generic.h> 75 #endif 76 77 #include <dev/usb/quirk/usb_quirk.h> 78 79 #include <dev/usb/usb_controller.h> 80 #include <dev/usb/usb_bus.h> 81 82 /* function prototypes */ 83 84 static void usb_init_endpoint(struct usb_device *, uint8_t, 85 struct usb_endpoint_descriptor *, 86 struct usb_endpoint_ss_comp_descriptor *, 87 struct usb_endpoint *); 88 static void usb_unconfigure(struct usb_device *, uint8_t); 89 static void usb_detach_device_sub(struct usb_device *, device_t *, 90 char **, uint8_t); 91 static uint8_t usb_probe_and_attach_sub(struct usb_device *, 92 struct usb_attach_arg *); 93 static void usb_init_attach_arg(struct usb_device *, 94 struct usb_attach_arg *); 95 static void usb_suspend_resume_sub(struct usb_device *, device_t, 96 uint8_t); 97 static void usbd_clear_stall_proc(struct usb_proc_msg *_pm); 98 static usb_error_t usb_config_parse(struct usb_device *, uint8_t, uint8_t); 99 static void usbd_set_device_strings(struct usb_device *); 100 #if USB_HAVE_DEVCTL 101 static void usb_notify_addq(const char *type, struct usb_device *); 102 #endif 103 #if USB_HAVE_UGEN 104 static void usb_fifo_free_wrap(struct usb_device *, uint8_t, uint8_t); 105 static struct cdev *usb_make_dev(struct usb_device *, int, int); 106 static void usb_cdev_create(struct usb_device *); 107 static void usb_cdev_free(struct usb_device *); 108 static void usb_cdev_cleanup(void *); 109 #endif 110 111 /* This variable is global to allow easy access to it: */ 112 113 int usb_template = 0; 114 115 TUNABLE_INT("hw.usb.usb_template", &usb_template); 116 SYSCTL_INT(_hw_usb, OID_AUTO, template, CTLFLAG_RW, 117 &usb_template, 0, "Selected USB device side template"); 118 119 /* English is default language */ 120 121 static int usb_lang_id = 0x0009; 122 static int usb_lang_mask = 0x00FF; 123 124 TUNABLE_INT("hw.usb.usb_lang_id", &usb_lang_id); 125 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_id, CTLFLAG_RW, 126 &usb_lang_id, 0, "Preferred USB language ID"); 127 128 TUNABLE_INT("hw.usb.usb_lang_mask", &usb_lang_mask); 129 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_mask, CTLFLAG_RW, 130 &usb_lang_mask, 0, "Preferred USB language mask"); 131 132 static const char* statestr[USB_STATE_MAX] = { 133 [USB_STATE_DETACHED] = "DETACHED", 134 [USB_STATE_ATTACHED] = "ATTACHED", 135 [USB_STATE_POWERED] = "POWERED", 136 [USB_STATE_ADDRESSED] = "ADDRESSED", 137 [USB_STATE_CONFIGURED] = "CONFIGURED", 138 }; 139 140 const char * 141 usb_statestr(enum usb_dev_state state) 142 { 143 return ((state < USB_STATE_MAX) ? statestr[state] : "UNKNOWN"); 144 } 145 146 const char * 147 usb_get_manufacturer(struct usb_device *udev) 148 { 149 return (udev->manufacturer ? udev->manufacturer : "Unknown"); 150 } 151 152 const char * 153 usb_get_product(struct usb_device *udev) 154 { 155 return (udev->product ? udev->product : ""); 156 } 157 158 const char * 159 usb_get_serial(struct usb_device *udev) 160 { 161 return (udev->serial ? udev->serial : ""); 162 } 163 164 /*------------------------------------------------------------------------* 165 * usbd_get_ep_by_addr 166 * 167 * This function searches for an USB ep by endpoint address and 168 * direction. 169 * 170 * Returns: 171 * NULL: Failure 172 * Else: Success 173 *------------------------------------------------------------------------*/ 174 struct usb_endpoint * 175 usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val) 176 { 177 struct usb_endpoint *ep = udev->endpoints; 178 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 179 enum { 180 EA_MASK = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR), 181 }; 182 183 /* 184 * According to the USB specification not all bits are used 185 * for the endpoint address. Keep defined bits only: 186 */ 187 ea_val &= EA_MASK; 188 189 /* 190 * Iterate accross all the USB endpoints searching for a match 191 * based on the endpoint address: 192 */ 193 for (; ep != ep_end; ep++) { 194 195 if (ep->edesc == NULL) { 196 continue; 197 } 198 /* do the mask and check the value */ 199 if ((ep->edesc->bEndpointAddress & EA_MASK) == ea_val) { 200 goto found; 201 } 202 } 203 204 /* 205 * The default endpoint is always present and is checked separately: 206 */ 207 if ((udev->ctrl_ep.edesc) && 208 ((udev->ctrl_ep.edesc->bEndpointAddress & EA_MASK) == ea_val)) { 209 ep = &udev->ctrl_ep; 210 goto found; 211 } 212 return (NULL); 213 214 found: 215 return (ep); 216 } 217 218 /*------------------------------------------------------------------------* 219 * usbd_get_endpoint 220 * 221 * This function searches for an USB endpoint based on the information 222 * given by the passed "struct usb_config" pointer. 223 * 224 * Return values: 225 * NULL: No match. 226 * Else: Pointer to "struct usb_endpoint". 227 *------------------------------------------------------------------------*/ 228 struct usb_endpoint * 229 usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 230 const struct usb_config *setup) 231 { 232 struct usb_endpoint *ep = udev->endpoints; 233 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 234 uint8_t index = setup->ep_index; 235 uint8_t ea_mask; 236 uint8_t ea_val; 237 uint8_t type_mask; 238 uint8_t type_val; 239 240 DPRINTFN(10, "udev=%p iface_index=%d address=0x%x " 241 "type=0x%x dir=0x%x index=%d\n", 242 udev, iface_index, setup->endpoint, 243 setup->type, setup->direction, setup->ep_index); 244 245 /* check USB mode */ 246 247 if (setup->usb_mode != USB_MODE_DUAL && 248 udev->flags.usb_mode != setup->usb_mode) { 249 /* wrong mode - no endpoint */ 250 return (NULL); 251 } 252 253 /* setup expected endpoint direction mask and value */ 254 255 if (setup->direction == UE_DIR_RX) { 256 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 257 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 258 UE_DIR_OUT : UE_DIR_IN; 259 } else if (setup->direction == UE_DIR_TX) { 260 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 261 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 262 UE_DIR_IN : UE_DIR_OUT; 263 } else if (setup->direction == UE_DIR_ANY) { 264 /* match any endpoint direction */ 265 ea_mask = 0; 266 ea_val = 0; 267 } else { 268 /* match the given endpoint direction */ 269 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 270 ea_val = (setup->direction & (UE_DIR_IN | UE_DIR_OUT)); 271 } 272 273 /* setup expected endpoint address */ 274 275 if (setup->endpoint == UE_ADDR_ANY) { 276 /* match any endpoint address */ 277 } else { 278 /* match the given endpoint address */ 279 ea_mask |= UE_ADDR; 280 ea_val |= (setup->endpoint & UE_ADDR); 281 } 282 283 /* setup expected endpoint type */ 284 285 if (setup->type == UE_BULK_INTR) { 286 /* this will match BULK and INTERRUPT endpoints */ 287 type_mask = 2; 288 type_val = 2; 289 } else if (setup->type == UE_TYPE_ANY) { 290 /* match any endpoint type */ 291 type_mask = 0; 292 type_val = 0; 293 } else { 294 /* match the given endpoint type */ 295 type_mask = UE_XFERTYPE; 296 type_val = (setup->type & UE_XFERTYPE); 297 } 298 299 /* 300 * Iterate accross all the USB endpoints searching for a match 301 * based on the endpoint address. Note that we are searching 302 * the endpoints from the beginning of the "udev->endpoints" array. 303 */ 304 for (; ep != ep_end; ep++) { 305 306 if ((ep->edesc == NULL) || 307 (ep->iface_index != iface_index)) { 308 continue; 309 } 310 /* do the masks and check the values */ 311 312 if (((ep->edesc->bEndpointAddress & ea_mask) == ea_val) && 313 ((ep->edesc->bmAttributes & type_mask) == type_val)) { 314 if (!index--) { 315 goto found; 316 } 317 } 318 } 319 320 /* 321 * Match against default endpoint last, so that "any endpoint", "any 322 * address" and "any direction" returns the first endpoint of the 323 * interface. "iface_index" and "direction" is ignored: 324 */ 325 if ((udev->ctrl_ep.edesc) && 326 ((udev->ctrl_ep.edesc->bEndpointAddress & ea_mask) == ea_val) && 327 ((udev->ctrl_ep.edesc->bmAttributes & type_mask) == type_val) && 328 (!index)) { 329 ep = &udev->ctrl_ep; 330 goto found; 331 } 332 return (NULL); 333 334 found: 335 return (ep); 336 } 337 338 /*------------------------------------------------------------------------* 339 * usbd_interface_count 340 * 341 * This function stores the number of USB interfaces excluding 342 * alternate settings, which the USB config descriptor reports into 343 * the unsigned 8-bit integer pointed to by "count". 344 * 345 * Returns: 346 * 0: Success 347 * Else: Failure 348 *------------------------------------------------------------------------*/ 349 usb_error_t 350 usbd_interface_count(struct usb_device *udev, uint8_t *count) 351 { 352 if (udev->cdesc == NULL) { 353 *count = 0; 354 return (USB_ERR_NOT_CONFIGURED); 355 } 356 *count = udev->ifaces_max; 357 return (USB_ERR_NORMAL_COMPLETION); 358 } 359 360 361 /*------------------------------------------------------------------------* 362 * usb_init_endpoint 363 * 364 * This function will initialise the USB endpoint structure pointed to by 365 * the "endpoint" argument. The structure pointed to by "endpoint" must be 366 * zeroed before calling this function. 367 *------------------------------------------------------------------------*/ 368 static void 369 usb_init_endpoint(struct usb_device *udev, uint8_t iface_index, 370 struct usb_endpoint_descriptor *edesc, 371 struct usb_endpoint_ss_comp_descriptor *ecomp, 372 struct usb_endpoint *ep) 373 { 374 struct usb_bus_methods *methods; 375 376 methods = udev->bus->methods; 377 378 (methods->endpoint_init) (udev, edesc, ep); 379 380 /* initialise USB endpoint structure */ 381 ep->edesc = edesc; 382 ep->ecomp = ecomp; 383 ep->iface_index = iface_index; 384 TAILQ_INIT(&ep->endpoint_q.head); 385 ep->endpoint_q.command = &usbd_pipe_start; 386 387 /* the pipe is not supported by the hardware */ 388 if (ep->methods == NULL) 389 return; 390 391 /* clear stall, if any */ 392 if (methods->clear_stall != NULL) { 393 USB_BUS_LOCK(udev->bus); 394 (methods->clear_stall) (udev, ep); 395 USB_BUS_UNLOCK(udev->bus); 396 } 397 } 398 399 /*-----------------------------------------------------------------------* 400 * usb_endpoint_foreach 401 * 402 * This function will iterate all the USB endpoints except the control 403 * endpoint. This function is NULL safe. 404 * 405 * Return values: 406 * NULL: End of USB endpoints 407 * Else: Pointer to next USB endpoint 408 *------------------------------------------------------------------------*/ 409 struct usb_endpoint * 410 usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep) 411 { 412 struct usb_endpoint *ep_end; 413 414 /* be NULL safe */ 415 if (udev == NULL) 416 return (NULL); 417 418 ep_end = udev->endpoints + udev->endpoints_max; 419 420 /* get next endpoint */ 421 if (ep == NULL) 422 ep = udev->endpoints; 423 else 424 ep++; 425 426 /* find next allocated ep */ 427 while (ep != ep_end) { 428 if (ep->edesc != NULL) 429 return (ep); 430 ep++; 431 } 432 return (NULL); 433 } 434 435 /*------------------------------------------------------------------------* 436 * usb_unconfigure 437 * 438 * This function will free all USB interfaces and USB endpoints belonging 439 * to an USB device. 440 * 441 * Flag values, see "USB_UNCFG_FLAG_XXX". 442 *------------------------------------------------------------------------*/ 443 static void 444 usb_unconfigure(struct usb_device *udev, uint8_t flag) 445 { 446 uint8_t do_unlock; 447 448 /* automatic locking */ 449 if (usbd_enum_is_locked(udev)) { 450 do_unlock = 0; 451 } else { 452 do_unlock = 1; 453 usbd_enum_lock(udev); 454 } 455 456 /* detach all interface drivers */ 457 usb_detach_device(udev, USB_IFACE_INDEX_ANY, flag); 458 459 #if USB_HAVE_UGEN 460 /* free all FIFOs except control endpoint FIFOs */ 461 usb_fifo_free_wrap(udev, USB_IFACE_INDEX_ANY, flag); 462 463 /* 464 * Free all cdev's, if any. 465 */ 466 usb_cdev_free(udev); 467 #endif 468 469 #if USB_HAVE_COMPAT_LINUX 470 /* free Linux compat device, if any */ 471 if (udev->linux_endpoint_start) { 472 usb_linux_free_device(udev); 473 udev->linux_endpoint_start = NULL; 474 } 475 #endif 476 477 usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_FREE); 478 479 /* free "cdesc" after "ifaces" and "endpoints", if any */ 480 if (udev->cdesc != NULL) { 481 if (udev->flags.usb_mode != USB_MODE_DEVICE) 482 free(udev->cdesc, M_USB); 483 udev->cdesc = NULL; 484 } 485 /* set unconfigured state */ 486 udev->curr_config_no = USB_UNCONFIG_NO; 487 udev->curr_config_index = USB_UNCONFIG_INDEX; 488 489 if (do_unlock) 490 usbd_enum_unlock(udev); 491 } 492 493 /*------------------------------------------------------------------------* 494 * usbd_set_config_index 495 * 496 * This function selects configuration by index, independent of the 497 * actual configuration number. This function should not be used by 498 * USB drivers. 499 * 500 * Returns: 501 * 0: Success 502 * Else: Failure 503 *------------------------------------------------------------------------*/ 504 usb_error_t 505 usbd_set_config_index(struct usb_device *udev, uint8_t index) 506 { 507 struct usb_status ds; 508 struct usb_config_descriptor *cdp; 509 uint16_t power; 510 uint16_t max_power; 511 uint8_t selfpowered; 512 uint8_t do_unlock; 513 usb_error_t err; 514 515 DPRINTFN(6, "udev=%p index=%d\n", udev, index); 516 517 /* automatic locking */ 518 if (usbd_enum_is_locked(udev)) { 519 do_unlock = 0; 520 } else { 521 do_unlock = 1; 522 usbd_enum_lock(udev); 523 } 524 525 usb_unconfigure(udev, 0); 526 527 if (index == USB_UNCONFIG_INDEX) { 528 /* 529 * Leave unallocated when unconfiguring the 530 * device. "usb_unconfigure()" will also reset 531 * the current config number and index. 532 */ 533 err = usbd_req_set_config(udev, NULL, USB_UNCONFIG_NO); 534 if (udev->state == USB_STATE_CONFIGURED) 535 usb_set_device_state(udev, USB_STATE_ADDRESSED); 536 goto done; 537 } 538 /* get the full config descriptor */ 539 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 540 /* save some memory */ 541 err = usbd_req_get_descriptor_ptr(udev, &cdp, 542 (UDESC_CONFIG << 8) | index); 543 } else { 544 /* normal request */ 545 err = usbd_req_get_config_desc_full(udev, 546 NULL, &cdp, M_USB, index); 547 } 548 if (err) { 549 goto done; 550 } 551 /* set the new config descriptor */ 552 553 udev->cdesc = cdp; 554 555 /* Figure out if the device is self or bus powered. */ 556 selfpowered = 0; 557 if ((!udev->flags.uq_bus_powered) && 558 (cdp->bmAttributes & UC_SELF_POWERED) && 559 (udev->flags.usb_mode == USB_MODE_HOST)) { 560 /* May be self powered. */ 561 if (cdp->bmAttributes & UC_BUS_POWERED) { 562 /* Must ask device. */ 563 err = usbd_req_get_device_status(udev, NULL, &ds); 564 if (err) { 565 DPRINTFN(0, "could not read " 566 "device status: %s\n", 567 usbd_errstr(err)); 568 } else if (UGETW(ds.wStatus) & UDS_SELF_POWERED) { 569 selfpowered = 1; 570 } 571 DPRINTF("status=0x%04x \n", 572 UGETW(ds.wStatus)); 573 } else 574 selfpowered = 1; 575 } 576 DPRINTF("udev=%p cdesc=%p (addr %d) cno=%d attr=0x%02x, " 577 "selfpowered=%d, power=%d\n", 578 udev, cdp, 579 udev->address, cdp->bConfigurationValue, cdp->bmAttributes, 580 selfpowered, cdp->bMaxPower * 2); 581 582 /* Check if we have enough power. */ 583 power = cdp->bMaxPower * 2; 584 585 if (udev->parent_hub) { 586 max_power = udev->parent_hub->hub->portpower; 587 } else { 588 max_power = USB_MAX_POWER; 589 } 590 591 if (power > max_power) { 592 DPRINTFN(0, "power exceeded %d > %d\n", power, max_power); 593 err = USB_ERR_NO_POWER; 594 goto done; 595 } 596 /* Only update "self_powered" in USB Host Mode */ 597 if (udev->flags.usb_mode == USB_MODE_HOST) { 598 udev->flags.self_powered = selfpowered; 599 } 600 udev->power = power; 601 udev->curr_config_no = cdp->bConfigurationValue; 602 udev->curr_config_index = index; 603 usb_set_device_state(udev, USB_STATE_CONFIGURED); 604 605 /* Set the actual configuration value. */ 606 err = usbd_req_set_config(udev, NULL, cdp->bConfigurationValue); 607 if (err) { 608 goto done; 609 } 610 611 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_ALLOC); 612 if (err) { 613 goto done; 614 } 615 616 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_INIT); 617 if (err) { 618 goto done; 619 } 620 621 #if USB_HAVE_UGEN 622 /* create device nodes for each endpoint */ 623 usb_cdev_create(udev); 624 #endif 625 626 done: 627 DPRINTF("error=%s\n", usbd_errstr(err)); 628 if (err) { 629 usb_unconfigure(udev, 0); 630 } 631 if (do_unlock) 632 usbd_enum_unlock(udev); 633 return (err); 634 } 635 636 /*------------------------------------------------------------------------* 637 * usb_config_parse 638 * 639 * This function will allocate and free USB interfaces and USB endpoints, 640 * parse the USB configuration structure and initialise the USB endpoints 641 * and interfaces. If "iface_index" is not equal to 642 * "USB_IFACE_INDEX_ANY" then the "cmd" parameter is the 643 * alternate_setting to be selected for the given interface. Else the 644 * "cmd" parameter is defined by "USB_CFG_XXX". "iface_index" can be 645 * "USB_IFACE_INDEX_ANY" or a valid USB interface index. This function 646 * is typically called when setting the configuration or when setting 647 * an alternate interface. 648 * 649 * Returns: 650 * 0: Success 651 * Else: Failure 652 *------------------------------------------------------------------------*/ 653 static usb_error_t 654 usb_config_parse(struct usb_device *udev, uint8_t iface_index, uint8_t cmd) 655 { 656 struct usb_idesc_parse_state ips; 657 struct usb_interface_descriptor *id; 658 struct usb_endpoint_descriptor *ed; 659 struct usb_interface *iface; 660 struct usb_endpoint *ep; 661 usb_error_t err; 662 uint8_t ep_curr; 663 uint8_t ep_max; 664 uint8_t temp; 665 uint8_t do_init; 666 uint8_t alt_index; 667 668 if (iface_index != USB_IFACE_INDEX_ANY) { 669 /* parameter overload */ 670 alt_index = cmd; 671 cmd = USB_CFG_INIT; 672 } else { 673 /* not used */ 674 alt_index = 0; 675 } 676 677 err = 0; 678 679 DPRINTFN(5, "iface_index=%d cmd=%d\n", 680 iface_index, cmd); 681 682 if (cmd == USB_CFG_FREE) 683 goto cleanup; 684 685 if (cmd == USB_CFG_INIT) { 686 sx_assert(&udev->enum_sx, SA_LOCKED); 687 688 /* check for in-use endpoints */ 689 690 ep = udev->endpoints; 691 ep_max = udev->endpoints_max; 692 while (ep_max--) { 693 /* look for matching endpoints */ 694 if ((iface_index == USB_IFACE_INDEX_ANY) || 695 (iface_index == ep->iface_index)) { 696 if (ep->refcount_alloc != 0) { 697 /* 698 * This typically indicates a 699 * more serious error. 700 */ 701 err = USB_ERR_IN_USE; 702 } else { 703 /* reset endpoint */ 704 memset(ep, 0, sizeof(*ep)); 705 /* make sure we don't zero the endpoint again */ 706 ep->iface_index = USB_IFACE_INDEX_ANY; 707 } 708 } 709 ep++; 710 } 711 712 if (err) 713 return (err); 714 } 715 716 memset(&ips, 0, sizeof(ips)); 717 718 ep_curr = 0; 719 ep_max = 0; 720 721 while ((id = usb_idesc_foreach(udev->cdesc, &ips))) { 722 723 /* check for interface overflow */ 724 if (ips.iface_index == USB_IFACE_MAX) 725 break; /* crazy */ 726 727 iface = udev->ifaces + ips.iface_index; 728 729 /* check for specific interface match */ 730 731 if (cmd == USB_CFG_INIT) { 732 if ((iface_index != USB_IFACE_INDEX_ANY) && 733 (iface_index != ips.iface_index)) { 734 /* wrong interface */ 735 do_init = 0; 736 } else if (alt_index != ips.iface_index_alt) { 737 /* wrong alternate setting */ 738 do_init = 0; 739 } else { 740 /* initialise interface */ 741 do_init = 1; 742 } 743 } else 744 do_init = 0; 745 746 /* check for new interface */ 747 if (ips.iface_index_alt == 0) { 748 /* update current number of endpoints */ 749 ep_curr = ep_max; 750 } 751 /* check for init */ 752 if (do_init) { 753 /* setup the USB interface structure */ 754 iface->idesc = id; 755 /* default setting */ 756 iface->parent_iface_index = USB_IFACE_INDEX_ANY; 757 /* set alternate index */ 758 iface->alt_index = alt_index; 759 } 760 761 DPRINTFN(5, "found idesc nendpt=%d\n", id->bNumEndpoints); 762 763 ed = (struct usb_endpoint_descriptor *)id; 764 765 temp = ep_curr; 766 767 /* iterate all the endpoint descriptors */ 768 while ((ed = usb_edesc_foreach(udev->cdesc, ed))) { 769 770 if (temp == USB_EP_MAX) 771 break; /* crazy */ 772 773 ep = udev->endpoints + temp; 774 775 if (do_init) { 776 void *ecomp; 777 778 ecomp = usb_ed_comp_foreach(udev->cdesc, (void *)ed); 779 if (ecomp != NULL) 780 DPRINTFN(5, "Found endpoint companion descriptor\n"); 781 782 usb_init_endpoint(udev, 783 ips.iface_index, ed, ecomp, ep); 784 } 785 786 temp ++; 787 788 /* find maximum number of endpoints */ 789 if (ep_max < temp) 790 ep_max = temp; 791 792 /* optimalisation */ 793 id = (struct usb_interface_descriptor *)ed; 794 } 795 } 796 797 /* NOTE: It is valid to have no interfaces and no endpoints! */ 798 799 if (cmd == USB_CFG_ALLOC) { 800 udev->ifaces_max = ips.iface_index; 801 udev->ifaces = NULL; 802 if (udev->ifaces_max != 0) { 803 udev->ifaces = malloc(sizeof(*iface) * udev->ifaces_max, 804 M_USB, M_WAITOK | M_ZERO); 805 if (udev->ifaces == NULL) { 806 err = USB_ERR_NOMEM; 807 goto done; 808 } 809 } 810 if (ep_max != 0) { 811 udev->endpoints = malloc(sizeof(*ep) * ep_max, 812 M_USB, M_WAITOK | M_ZERO); 813 if (udev->endpoints == NULL) { 814 err = USB_ERR_NOMEM; 815 goto done; 816 } 817 } else { 818 udev->endpoints = NULL; 819 } 820 USB_BUS_LOCK(udev->bus); 821 udev->endpoints_max = ep_max; 822 /* reset any ongoing clear-stall */ 823 udev->ep_curr = NULL; 824 USB_BUS_UNLOCK(udev->bus); 825 } 826 827 done: 828 if (err) { 829 if (cmd == USB_CFG_ALLOC) { 830 cleanup: 831 USB_BUS_LOCK(udev->bus); 832 udev->endpoints_max = 0; 833 /* reset any ongoing clear-stall */ 834 udev->ep_curr = NULL; 835 USB_BUS_UNLOCK(udev->bus); 836 837 /* cleanup */ 838 if (udev->ifaces != NULL) 839 free(udev->ifaces, M_USB); 840 if (udev->endpoints != NULL) 841 free(udev->endpoints, M_USB); 842 843 udev->ifaces = NULL; 844 udev->endpoints = NULL; 845 udev->ifaces_max = 0; 846 } 847 } 848 return (err); 849 } 850 851 /*------------------------------------------------------------------------* 852 * usbd_set_alt_interface_index 853 * 854 * This function will select an alternate interface index for the 855 * given interface index. The interface should not be in use when this 856 * function is called. That means there should not be any open USB 857 * transfers. Else an error is returned. If the alternate setting is 858 * already set this function will simply return success. This function 859 * is called in Host mode and Device mode! 860 * 861 * Returns: 862 * 0: Success 863 * Else: Failure 864 *------------------------------------------------------------------------*/ 865 usb_error_t 866 usbd_set_alt_interface_index(struct usb_device *udev, 867 uint8_t iface_index, uint8_t alt_index) 868 { 869 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 870 usb_error_t err; 871 uint8_t do_unlock; 872 873 /* automatic locking */ 874 if (usbd_enum_is_locked(udev)) { 875 do_unlock = 0; 876 } else { 877 do_unlock = 1; 878 usbd_enum_lock(udev); 879 } 880 if (iface == NULL) { 881 err = USB_ERR_INVAL; 882 goto done; 883 } 884 if (iface->alt_index == alt_index) { 885 /* 886 * Optimise away duplicate setting of 887 * alternate setting in USB Host Mode! 888 */ 889 err = 0; 890 goto done; 891 } 892 #if USB_HAVE_UGEN 893 /* 894 * Free all generic FIFOs for this interface, except control 895 * endpoint FIFOs: 896 */ 897 usb_fifo_free_wrap(udev, iface_index, 0); 898 #endif 899 900 err = usb_config_parse(udev, iface_index, alt_index); 901 if (err) { 902 goto done; 903 } 904 if (iface->alt_index != alt_index) { 905 /* the alternate setting does not exist */ 906 err = USB_ERR_INVAL; 907 goto done; 908 } 909 910 err = usbd_req_set_alt_interface_no(udev, NULL, iface_index, 911 iface->idesc->bAlternateSetting); 912 913 done: 914 if (do_unlock) 915 usbd_enum_unlock(udev); 916 917 return (err); 918 } 919 920 /*------------------------------------------------------------------------* 921 * usbd_set_endpoint_stall 922 * 923 * This function is used to make a BULK or INTERRUPT endpoint send 924 * STALL tokens in USB device mode. 925 * 926 * Returns: 927 * 0: Success 928 * Else: Failure 929 *------------------------------------------------------------------------*/ 930 usb_error_t 931 usbd_set_endpoint_stall(struct usb_device *udev, struct usb_endpoint *ep, 932 uint8_t do_stall) 933 { 934 struct usb_xfer *xfer; 935 uint8_t et; 936 uint8_t was_stalled; 937 938 if (ep == NULL) { 939 /* nothing to do */ 940 DPRINTF("Cannot find endpoint\n"); 941 /* 942 * Pretend that the clear or set stall request is 943 * successful else some USB host stacks can do 944 * strange things, especially when a control endpoint 945 * stalls. 946 */ 947 return (0); 948 } 949 et = (ep->edesc->bmAttributes & UE_XFERTYPE); 950 951 if ((et != UE_BULK) && 952 (et != UE_INTERRUPT)) { 953 /* 954 * Should not stall control 955 * nor isochronous endpoints. 956 */ 957 DPRINTF("Invalid endpoint\n"); 958 return (0); 959 } 960 USB_BUS_LOCK(udev->bus); 961 962 /* store current stall state */ 963 was_stalled = ep->is_stalled; 964 965 /* check for no change */ 966 if (was_stalled && do_stall) { 967 /* if the endpoint is already stalled do nothing */ 968 USB_BUS_UNLOCK(udev->bus); 969 DPRINTF("No change\n"); 970 return (0); 971 } 972 /* set stalled state */ 973 ep->is_stalled = 1; 974 975 if (do_stall || (!was_stalled)) { 976 if (!was_stalled) { 977 /* lookup the current USB transfer, if any */ 978 xfer = ep->endpoint_q.curr; 979 } else { 980 xfer = NULL; 981 } 982 983 /* 984 * If "xfer" is non-NULL the "set_stall" method will 985 * complete the USB transfer like in case of a timeout 986 * setting the error code "USB_ERR_STALLED". 987 */ 988 (udev->bus->methods->set_stall) (udev, xfer, ep, &do_stall); 989 } 990 if (!do_stall) { 991 ep->toggle_next = 0; /* reset data toggle */ 992 ep->is_stalled = 0; /* clear stalled state */ 993 994 (udev->bus->methods->clear_stall) (udev, ep); 995 996 /* start up the current or next transfer, if any */ 997 usb_command_wrapper(&ep->endpoint_q, ep->endpoint_q.curr); 998 } 999 USB_BUS_UNLOCK(udev->bus); 1000 return (0); 1001 } 1002 1003 /*------------------------------------------------------------------------* 1004 * usb_reset_iface_endpoints - used in USB device side mode 1005 *------------------------------------------------------------------------*/ 1006 usb_error_t 1007 usb_reset_iface_endpoints(struct usb_device *udev, uint8_t iface_index) 1008 { 1009 struct usb_endpoint *ep; 1010 struct usb_endpoint *ep_end; 1011 1012 ep = udev->endpoints; 1013 ep_end = udev->endpoints + udev->endpoints_max; 1014 1015 for (; ep != ep_end; ep++) { 1016 1017 if ((ep->edesc == NULL) || 1018 (ep->iface_index != iface_index)) { 1019 continue; 1020 } 1021 /* simulate a clear stall from the peer */ 1022 usbd_set_endpoint_stall(udev, ep, 0); 1023 } 1024 return (0); 1025 } 1026 1027 /*------------------------------------------------------------------------* 1028 * usb_detach_device_sub 1029 * 1030 * This function will try to detach an USB device. If it fails a panic 1031 * will result. 1032 * 1033 * Flag values, see "USB_UNCFG_FLAG_XXX". 1034 *------------------------------------------------------------------------*/ 1035 static void 1036 usb_detach_device_sub(struct usb_device *udev, device_t *ppdev, 1037 char **ppnpinfo, uint8_t flag) 1038 { 1039 device_t dev; 1040 char *pnpinfo; 1041 int err; 1042 1043 dev = *ppdev; 1044 if (dev) { 1045 /* 1046 * NOTE: It is important to clear "*ppdev" before deleting 1047 * the child due to some device methods being called late 1048 * during the delete process ! 1049 */ 1050 *ppdev = NULL; 1051 1052 device_printf(dev, "at %s, port %d, addr %d " 1053 "(disconnected)\n", 1054 device_get_nameunit(udev->parent_dev), 1055 udev->port_no, udev->address); 1056 1057 if (device_is_attached(dev)) { 1058 if (udev->flags.peer_suspended) { 1059 err = DEVICE_RESUME(dev); 1060 if (err) { 1061 device_printf(dev, "Resume failed\n"); 1062 } 1063 } 1064 if (device_detach(dev)) { 1065 goto error; 1066 } 1067 } 1068 if (device_delete_child(udev->parent_dev, dev)) { 1069 goto error; 1070 } 1071 } 1072 1073 pnpinfo = *ppnpinfo; 1074 if (pnpinfo != NULL) { 1075 *ppnpinfo = NULL; 1076 free(pnpinfo, M_USBDEV); 1077 } 1078 return; 1079 1080 error: 1081 /* Detach is not allowed to fail in the USB world */ 1082 panic("usb_detach_device_sub: A USB driver would not detach\n"); 1083 } 1084 1085 /*------------------------------------------------------------------------* 1086 * usb_detach_device 1087 * 1088 * The following function will detach the matching interfaces. 1089 * This function is NULL safe. 1090 * 1091 * Flag values, see "USB_UNCFG_FLAG_XXX". 1092 *------------------------------------------------------------------------*/ 1093 void 1094 usb_detach_device(struct usb_device *udev, uint8_t iface_index, 1095 uint8_t flag) 1096 { 1097 struct usb_interface *iface; 1098 uint8_t i; 1099 1100 if (udev == NULL) { 1101 /* nothing to do */ 1102 return; 1103 } 1104 DPRINTFN(4, "udev=%p\n", udev); 1105 1106 sx_assert(&udev->enum_sx, SA_LOCKED); 1107 1108 /* 1109 * First detach the child to give the child's detach routine a 1110 * chance to detach the sub-devices in the correct order. 1111 * Then delete the child using "device_delete_child()" which 1112 * will detach all sub-devices from the bottom and upwards! 1113 */ 1114 if (iface_index != USB_IFACE_INDEX_ANY) { 1115 i = iface_index; 1116 iface_index = i + 1; 1117 } else { 1118 i = 0; 1119 iface_index = USB_IFACE_MAX; 1120 } 1121 1122 /* do the detach */ 1123 1124 for (; i != iface_index; i++) { 1125 1126 iface = usbd_get_iface(udev, i); 1127 if (iface == NULL) { 1128 /* looks like the end of the USB interfaces */ 1129 break; 1130 } 1131 usb_detach_device_sub(udev, &iface->subdev, 1132 &iface->pnpinfo, flag); 1133 } 1134 } 1135 1136 /*------------------------------------------------------------------------* 1137 * usb_probe_and_attach_sub 1138 * 1139 * Returns: 1140 * 0: Success 1141 * Else: Failure 1142 *------------------------------------------------------------------------*/ 1143 static uint8_t 1144 usb_probe_and_attach_sub(struct usb_device *udev, 1145 struct usb_attach_arg *uaa) 1146 { 1147 struct usb_interface *iface; 1148 device_t dev; 1149 int err; 1150 1151 iface = uaa->iface; 1152 if (iface->parent_iface_index != USB_IFACE_INDEX_ANY) { 1153 /* leave interface alone */ 1154 return (0); 1155 } 1156 dev = iface->subdev; 1157 if (dev) { 1158 1159 /* clean up after module unload */ 1160 1161 if (device_is_attached(dev)) { 1162 /* already a device there */ 1163 return (0); 1164 } 1165 /* clear "iface->subdev" as early as possible */ 1166 1167 iface->subdev = NULL; 1168 1169 if (device_delete_child(udev->parent_dev, dev)) { 1170 1171 /* 1172 * Panic here, else one can get a double call 1173 * to device_detach(). USB devices should 1174 * never fail on detach! 1175 */ 1176 panic("device_delete_child() failed\n"); 1177 } 1178 } 1179 if (uaa->temp_dev == NULL) { 1180 1181 /* create a new child */ 1182 uaa->temp_dev = device_add_child(udev->parent_dev, NULL, -1); 1183 if (uaa->temp_dev == NULL) { 1184 device_printf(udev->parent_dev, 1185 "Device creation failed\n"); 1186 return (1); /* failure */ 1187 } 1188 device_set_ivars(uaa->temp_dev, uaa); 1189 device_quiet(uaa->temp_dev); 1190 } 1191 /* 1192 * Set "subdev" before probe and attach so that "devd" gets 1193 * the information it needs. 1194 */ 1195 iface->subdev = uaa->temp_dev; 1196 1197 if (device_probe_and_attach(iface->subdev) == 0) { 1198 /* 1199 * The USB attach arguments are only available during probe 1200 * and attach ! 1201 */ 1202 uaa->temp_dev = NULL; 1203 device_set_ivars(iface->subdev, NULL); 1204 1205 if (udev->flags.peer_suspended) { 1206 err = DEVICE_SUSPEND(iface->subdev); 1207 if (err) 1208 device_printf(iface->subdev, "Suspend failed\n"); 1209 } 1210 return (0); /* success */ 1211 } else { 1212 /* No USB driver found */ 1213 iface->subdev = NULL; 1214 } 1215 return (1); /* failure */ 1216 } 1217 1218 /*------------------------------------------------------------------------* 1219 * usbd_set_parent_iface 1220 * 1221 * Using this function will lock the alternate interface setting on an 1222 * interface. It is typically used for multi interface drivers. In USB 1223 * device side mode it is assumed that the alternate interfaces all 1224 * have the same endpoint descriptors. The default parent index value 1225 * is "USB_IFACE_INDEX_ANY". Then the alternate setting value is not 1226 * locked. 1227 *------------------------------------------------------------------------*/ 1228 void 1229 usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 1230 uint8_t parent_index) 1231 { 1232 struct usb_interface *iface; 1233 1234 iface = usbd_get_iface(udev, iface_index); 1235 if (iface) { 1236 iface->parent_iface_index = parent_index; 1237 } 1238 } 1239 1240 static void 1241 usb_init_attach_arg(struct usb_device *udev, 1242 struct usb_attach_arg *uaa) 1243 { 1244 bzero(uaa, sizeof(*uaa)); 1245 1246 uaa->device = udev; 1247 uaa->usb_mode = udev->flags.usb_mode; 1248 uaa->port = udev->port_no; 1249 uaa->dev_state = UAA_DEV_READY; 1250 1251 uaa->info.idVendor = UGETW(udev->ddesc.idVendor); 1252 uaa->info.idProduct = UGETW(udev->ddesc.idProduct); 1253 uaa->info.bcdDevice = UGETW(udev->ddesc.bcdDevice); 1254 uaa->info.bDeviceClass = udev->ddesc.bDeviceClass; 1255 uaa->info.bDeviceSubClass = udev->ddesc.bDeviceSubClass; 1256 uaa->info.bDeviceProtocol = udev->ddesc.bDeviceProtocol; 1257 uaa->info.bConfigIndex = udev->curr_config_index; 1258 uaa->info.bConfigNum = udev->curr_config_no; 1259 } 1260 1261 /*------------------------------------------------------------------------* 1262 * usb_probe_and_attach 1263 * 1264 * This function is called from "uhub_explore_sub()", 1265 * "usb_handle_set_config()" and "usb_handle_request()". 1266 * 1267 * Returns: 1268 * 0: Success 1269 * Else: A control transfer failed 1270 *------------------------------------------------------------------------*/ 1271 usb_error_t 1272 usb_probe_and_attach(struct usb_device *udev, uint8_t iface_index) 1273 { 1274 struct usb_attach_arg uaa; 1275 struct usb_interface *iface; 1276 uint8_t i; 1277 uint8_t j; 1278 uint8_t do_unlock; 1279 1280 if (udev == NULL) { 1281 DPRINTF("udev == NULL\n"); 1282 return (USB_ERR_INVAL); 1283 } 1284 /* automatic locking */ 1285 if (usbd_enum_is_locked(udev)) { 1286 do_unlock = 0; 1287 } else { 1288 do_unlock = 1; 1289 usbd_enum_lock(udev); 1290 } 1291 1292 if (udev->curr_config_index == USB_UNCONFIG_INDEX) { 1293 /* do nothing - no configuration has been set */ 1294 goto done; 1295 } 1296 /* setup USB attach arguments */ 1297 1298 usb_init_attach_arg(udev, &uaa); 1299 1300 /* Check if only one interface should be probed: */ 1301 if (iface_index != USB_IFACE_INDEX_ANY) { 1302 i = iface_index; 1303 j = i + 1; 1304 } else { 1305 i = 0; 1306 j = USB_IFACE_MAX; 1307 } 1308 1309 /* Do the probe and attach */ 1310 for (; i != j; i++) { 1311 1312 iface = usbd_get_iface(udev, i); 1313 if (iface == NULL) { 1314 /* 1315 * Looks like the end of the USB 1316 * interfaces ! 1317 */ 1318 DPRINTFN(2, "end of interfaces " 1319 "at %u\n", i); 1320 break; 1321 } 1322 if (iface->idesc == NULL) { 1323 /* no interface descriptor */ 1324 continue; 1325 } 1326 uaa.iface = iface; 1327 1328 uaa.info.bInterfaceClass = 1329 iface->idesc->bInterfaceClass; 1330 uaa.info.bInterfaceSubClass = 1331 iface->idesc->bInterfaceSubClass; 1332 uaa.info.bInterfaceProtocol = 1333 iface->idesc->bInterfaceProtocol; 1334 uaa.info.bIfaceIndex = i; 1335 uaa.info.bIfaceNum = 1336 iface->idesc->bInterfaceNumber; 1337 uaa.use_generic = 0; 1338 uaa.driver_info = 0; /* reset driver_info */ 1339 1340 DPRINTFN(2, "iclass=%u/%u/%u iindex=%u/%u\n", 1341 uaa.info.bInterfaceClass, 1342 uaa.info.bInterfaceSubClass, 1343 uaa.info.bInterfaceProtocol, 1344 uaa.info.bIfaceIndex, 1345 uaa.info.bIfaceNum); 1346 1347 /* try specific interface drivers first */ 1348 1349 if (usb_probe_and_attach_sub(udev, &uaa)) { 1350 /* ignore */ 1351 } 1352 /* try generic interface drivers last */ 1353 1354 uaa.use_generic = 1; 1355 uaa.driver_info = 0; /* reset driver_info */ 1356 1357 if (usb_probe_and_attach_sub(udev, &uaa)) { 1358 /* ignore */ 1359 } 1360 } 1361 1362 if (uaa.temp_dev) { 1363 /* remove the last created child; it is unused */ 1364 1365 if (device_delete_child(udev->parent_dev, uaa.temp_dev)) { 1366 DPRINTFN(0, "device delete child failed\n"); 1367 } 1368 } 1369 done: 1370 if (do_unlock) 1371 usbd_enum_unlock(udev); 1372 1373 return (0); 1374 } 1375 1376 /*------------------------------------------------------------------------* 1377 * usb_suspend_resume_sub 1378 * 1379 * This function is called when the suspend or resume methods should 1380 * be executed on an USB device. 1381 *------------------------------------------------------------------------*/ 1382 static void 1383 usb_suspend_resume_sub(struct usb_device *udev, device_t dev, uint8_t do_suspend) 1384 { 1385 int err; 1386 1387 if (dev == NULL) { 1388 return; 1389 } 1390 if (!device_is_attached(dev)) { 1391 return; 1392 } 1393 if (do_suspend) { 1394 err = DEVICE_SUSPEND(dev); 1395 } else { 1396 err = DEVICE_RESUME(dev); 1397 } 1398 if (err) { 1399 device_printf(dev, "%s failed\n", 1400 do_suspend ? "Suspend" : "Resume"); 1401 } 1402 } 1403 1404 /*------------------------------------------------------------------------* 1405 * usb_suspend_resume 1406 * 1407 * The following function will suspend or resume the USB device. 1408 * 1409 * Returns: 1410 * 0: Success 1411 * Else: Failure 1412 *------------------------------------------------------------------------*/ 1413 usb_error_t 1414 usb_suspend_resume(struct usb_device *udev, uint8_t do_suspend) 1415 { 1416 struct usb_interface *iface; 1417 uint8_t i; 1418 1419 if (udev == NULL) { 1420 /* nothing to do */ 1421 return (0); 1422 } 1423 DPRINTFN(4, "udev=%p do_suspend=%d\n", udev, do_suspend); 1424 1425 sx_assert(&udev->sr_sx, SA_LOCKED); 1426 1427 USB_BUS_LOCK(udev->bus); 1428 /* filter the suspend events */ 1429 if (udev->flags.peer_suspended == do_suspend) { 1430 USB_BUS_UNLOCK(udev->bus); 1431 /* nothing to do */ 1432 return (0); 1433 } 1434 udev->flags.peer_suspended = do_suspend; 1435 USB_BUS_UNLOCK(udev->bus); 1436 1437 /* do the suspend or resume */ 1438 1439 for (i = 0; i != USB_IFACE_MAX; i++) { 1440 1441 iface = usbd_get_iface(udev, i); 1442 if (iface == NULL) { 1443 /* looks like the end of the USB interfaces */ 1444 break; 1445 } 1446 usb_suspend_resume_sub(udev, iface->subdev, do_suspend); 1447 } 1448 return (0); 1449 } 1450 1451 /*------------------------------------------------------------------------* 1452 * usbd_clear_stall_proc 1453 * 1454 * This function performs generic USB clear stall operations. 1455 *------------------------------------------------------------------------*/ 1456 static void 1457 usbd_clear_stall_proc(struct usb_proc_msg *_pm) 1458 { 1459 struct usb_clear_stall_msg *pm = (void *)_pm; 1460 struct usb_device *udev = pm->udev; 1461 1462 /* Change lock */ 1463 USB_BUS_UNLOCK(udev->bus); 1464 mtx_lock(&udev->device_mtx); 1465 1466 /* Start clear stall callback */ 1467 usbd_transfer_start(udev->ctrl_xfer[1]); 1468 1469 /* Change lock */ 1470 mtx_unlock(&udev->device_mtx); 1471 USB_BUS_LOCK(udev->bus); 1472 } 1473 1474 /*------------------------------------------------------------------------* 1475 * usb_alloc_device 1476 * 1477 * This function allocates a new USB device. This function is called 1478 * when a new device has been put in the powered state, but not yet in 1479 * the addressed state. Get initial descriptor, set the address, get 1480 * full descriptor and get strings. 1481 * 1482 * Return values: 1483 * 0: Failure 1484 * Else: Success 1485 *------------------------------------------------------------------------*/ 1486 struct usb_device * 1487 usb_alloc_device(device_t parent_dev, struct usb_bus *bus, 1488 struct usb_device *parent_hub, uint8_t depth, uint8_t port_index, 1489 uint8_t port_no, enum usb_dev_speed speed, enum usb_hc_mode mode) 1490 { 1491 struct usb_attach_arg uaa; 1492 struct usb_device *udev; 1493 struct usb_device *adev; 1494 struct usb_device *hub; 1495 uint8_t *scratch_ptr; 1496 size_t scratch_size; 1497 usb_error_t err; 1498 uint8_t device_index; 1499 uint8_t config_index; 1500 uint8_t config_quirk; 1501 uint8_t set_config_failed; 1502 1503 DPRINTF("parent_dev=%p, bus=%p, parent_hub=%p, depth=%u, " 1504 "port_index=%u, port_no=%u, speed=%u, usb_mode=%u\n", 1505 parent_dev, bus, parent_hub, depth, port_index, port_no, 1506 speed, mode); 1507 1508 /* 1509 * Find an unused device index. In USB Host mode this is the 1510 * same as the device address. 1511 * 1512 * Device index zero is not used and device index 1 should 1513 * always be the root hub. 1514 */ 1515 for (device_index = USB_ROOT_HUB_ADDR; 1516 (device_index != bus->devices_max) && 1517 (bus->devices[device_index] != NULL); 1518 device_index++) /* nop */; 1519 1520 if (device_index == bus->devices_max) { 1521 device_printf(bus->bdev, 1522 "No free USB device index for new device\n"); 1523 return (NULL); 1524 } 1525 1526 if (depth > 0x10) { 1527 device_printf(bus->bdev, 1528 "Invalid device depth\n"); 1529 return (NULL); 1530 } 1531 udev = malloc(sizeof(*udev), M_USB, M_WAITOK | M_ZERO); 1532 if (udev == NULL) { 1533 return (NULL); 1534 } 1535 /* initialise our SX-lock */ 1536 sx_init_flags(&udev->ctrl_sx, "USB device SX lock", SX_DUPOK); 1537 1538 /* initialise our SX-lock */ 1539 sx_init_flags(&udev->enum_sx, "USB config SX lock", SX_DUPOK); 1540 sx_init_flags(&udev->sr_sx, "USB suspend and resume SX lock", SX_DUPOK); 1541 1542 cv_init(&udev->ctrlreq_cv, "WCTRL"); 1543 cv_init(&udev->ref_cv, "UGONE"); 1544 1545 /* initialise our mutex */ 1546 mtx_init(&udev->device_mtx, "USB device mutex", NULL, MTX_DEF); 1547 1548 /* initialise generic clear stall */ 1549 udev->cs_msg[0].hdr.pm_callback = &usbd_clear_stall_proc; 1550 udev->cs_msg[0].udev = udev; 1551 udev->cs_msg[1].hdr.pm_callback = &usbd_clear_stall_proc; 1552 udev->cs_msg[1].udev = udev; 1553 1554 /* initialise some USB device fields */ 1555 udev->parent_hub = parent_hub; 1556 udev->parent_dev = parent_dev; 1557 udev->port_index = port_index; 1558 udev->port_no = port_no; 1559 udev->depth = depth; 1560 udev->bus = bus; 1561 udev->address = USB_START_ADDR; /* default value */ 1562 udev->plugtime = (usb_ticks_t)ticks; 1563 /* 1564 * We need to force the power mode to "on" because there are plenty 1565 * of USB devices out there that do not work very well with 1566 * automatic suspend and resume! 1567 */ 1568 udev->power_mode = usbd_filter_power_mode(udev, USB_POWER_MODE_ON); 1569 udev->pwr_save.last_xfer_time = ticks; 1570 /* we are not ready yet */ 1571 udev->refcount = 1; 1572 1573 /* set up default endpoint descriptor */ 1574 udev->ctrl_ep_desc.bLength = sizeof(udev->ctrl_ep_desc); 1575 udev->ctrl_ep_desc.bDescriptorType = UDESC_ENDPOINT; 1576 udev->ctrl_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 1577 udev->ctrl_ep_desc.bmAttributes = UE_CONTROL; 1578 udev->ctrl_ep_desc.wMaxPacketSize[0] = USB_MAX_IPACKET; 1579 udev->ctrl_ep_desc.wMaxPacketSize[1] = 0; 1580 udev->ctrl_ep_desc.bInterval = 0; 1581 1582 /* set up default endpoint companion descriptor */ 1583 udev->ctrl_ep_comp_desc.bLength = sizeof(udev->ctrl_ep_comp_desc); 1584 udev->ctrl_ep_comp_desc.bDescriptorType = UDESC_ENDPOINT_SS_COMP; 1585 1586 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 1587 1588 udev->speed = speed; 1589 udev->flags.usb_mode = mode; 1590 1591 /* search for our High Speed USB HUB, if any */ 1592 1593 adev = udev; 1594 hub = udev->parent_hub; 1595 1596 while (hub) { 1597 if (hub->speed == USB_SPEED_HIGH) { 1598 udev->hs_hub_addr = hub->address; 1599 udev->parent_hs_hub = hub; 1600 udev->hs_port_no = adev->port_no; 1601 break; 1602 } 1603 adev = hub; 1604 hub = hub->parent_hub; 1605 } 1606 1607 /* init the default endpoint */ 1608 usb_init_endpoint(udev, 0, 1609 &udev->ctrl_ep_desc, 1610 &udev->ctrl_ep_comp_desc, 1611 &udev->ctrl_ep); 1612 1613 /* set device index */ 1614 udev->device_index = device_index; 1615 1616 #if USB_HAVE_UGEN 1617 /* Create ugen name */ 1618 snprintf(udev->ugen_name, sizeof(udev->ugen_name), 1619 USB_GENERIC_NAME "%u.%u", device_get_unit(bus->bdev), 1620 device_index); 1621 LIST_INIT(&udev->pd_list); 1622 1623 /* Create the control endpoint device */ 1624 udev->ctrl_dev = usb_make_dev(udev, 0, FREAD|FWRITE); 1625 1626 /* Create a link from /dev/ugenX.X to the default endpoint */ 1627 make_dev_alias(udev->ctrl_dev, "%s", udev->ugen_name); 1628 #endif 1629 /* Initialise device */ 1630 if (bus->methods->device_init != NULL) { 1631 err = (bus->methods->device_init) (udev); 1632 if (err != 0) { 1633 DPRINTFN(0, "device init %d failed " 1634 "(%s, ignored)\n", device_index, 1635 usbd_errstr(err)); 1636 goto done; 1637 } 1638 } 1639 /* set powered device state after device init is complete */ 1640 usb_set_device_state(udev, USB_STATE_POWERED); 1641 1642 if (udev->flags.usb_mode == USB_MODE_HOST) { 1643 1644 err = usbd_req_set_address(udev, NULL, device_index); 1645 1646 /* 1647 * This is the new USB device address from now on, if 1648 * the set address request didn't set it already. 1649 */ 1650 if (udev->address == USB_START_ADDR) 1651 udev->address = device_index; 1652 1653 /* 1654 * We ignore any set-address errors, hence there are 1655 * buggy USB devices out there that actually receive 1656 * the SETUP PID, but manage to set the address before 1657 * the STATUS stage is ACK'ed. If the device responds 1658 * to the subsequent get-descriptor at the new 1659 * address, then we know that the set-address command 1660 * was successful. 1661 */ 1662 if (err) { 1663 DPRINTFN(0, "set address %d failed " 1664 "(%s, ignored)\n", udev->address, 1665 usbd_errstr(err)); 1666 } 1667 } else { 1668 /* We are not self powered */ 1669 udev->flags.self_powered = 0; 1670 1671 /* Set unconfigured state */ 1672 udev->curr_config_no = USB_UNCONFIG_NO; 1673 udev->curr_config_index = USB_UNCONFIG_INDEX; 1674 1675 /* Setup USB descriptors */ 1676 err = (usb_temp_setup_by_index_p) (udev, usb_template); 1677 if (err) { 1678 DPRINTFN(0, "setting up USB template failed maybe the USB " 1679 "template module has not been loaded\n"); 1680 goto done; 1681 } 1682 } 1683 usb_set_device_state(udev, USB_STATE_ADDRESSED); 1684 1685 /* setup the device descriptor and the initial "wMaxPacketSize" */ 1686 err = usbd_setup_device_desc(udev, NULL); 1687 1688 if (err != 0) { 1689 /* XXX try to re-enumerate the device */ 1690 err = usbd_req_re_enumerate(udev, NULL); 1691 if (err) 1692 goto done; 1693 } 1694 1695 /* 1696 * Setup temporary USB attach args so that we can figure out some 1697 * basic quirks for this device. 1698 */ 1699 usb_init_attach_arg(udev, &uaa); 1700 1701 if (usb_test_quirk(&uaa, UQ_BUS_POWERED)) { 1702 udev->flags.uq_bus_powered = 1; 1703 } 1704 if (usb_test_quirk(&uaa, UQ_NO_STRINGS)) { 1705 udev->flags.no_strings = 1; 1706 } 1707 /* 1708 * Workaround for buggy USB devices. 1709 * 1710 * It appears that some string-less USB chips will crash and 1711 * disappear if any attempts are made to read any string 1712 * descriptors. 1713 * 1714 * Try to detect such chips by checking the strings in the USB 1715 * device descriptor. If no strings are present there we 1716 * simply disable all USB strings. 1717 */ 1718 scratch_ptr = udev->bus->scratch[0].data; 1719 scratch_size = sizeof(udev->bus->scratch[0].data); 1720 1721 if (udev->ddesc.iManufacturer || 1722 udev->ddesc.iProduct || 1723 udev->ddesc.iSerialNumber) { 1724 /* read out the language ID string */ 1725 err = usbd_req_get_string_desc(udev, NULL, 1726 (char *)scratch_ptr, 4, 0, USB_LANGUAGE_TABLE); 1727 } else { 1728 err = USB_ERR_INVAL; 1729 } 1730 1731 if (err || (scratch_ptr[0] < 4)) { 1732 udev->flags.no_strings = 1; 1733 } else { 1734 uint16_t langid; 1735 uint16_t pref; 1736 uint16_t mask; 1737 uint8_t x; 1738 1739 /* load preferred value and mask */ 1740 pref = usb_lang_id; 1741 mask = usb_lang_mask; 1742 1743 /* align length correctly */ 1744 scratch_ptr[0] &= ~1; 1745 1746 /* fix compiler warning */ 1747 langid = 0; 1748 1749 /* search for preferred language */ 1750 for (x = 2; (x < scratch_ptr[0]); x += 2) { 1751 langid = UGETW(scratch_ptr + x); 1752 if ((langid & mask) == pref) 1753 break; 1754 } 1755 if (x >= scratch_ptr[0]) { 1756 /* pick the first language as the default */ 1757 DPRINTFN(1, "Using first language\n"); 1758 langid = UGETW(scratch_ptr + 2); 1759 } 1760 1761 DPRINTFN(1, "Language selected: 0x%04x\n", langid); 1762 udev->langid = langid; 1763 } 1764 1765 /* assume 100mA bus powered for now. Changed when configured. */ 1766 udev->power = USB_MIN_POWER; 1767 /* fetch the vendor and product strings from the device */ 1768 usbd_set_device_strings(udev); 1769 1770 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 1771 /* USB device mode setup is complete */ 1772 err = 0; 1773 goto config_done; 1774 } 1775 1776 /* 1777 * Most USB devices should attach to config index 0 by 1778 * default 1779 */ 1780 if (usb_test_quirk(&uaa, UQ_CFG_INDEX_0)) { 1781 config_index = 0; 1782 config_quirk = 1; 1783 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_1)) { 1784 config_index = 1; 1785 config_quirk = 1; 1786 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_2)) { 1787 config_index = 2; 1788 config_quirk = 1; 1789 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_3)) { 1790 config_index = 3; 1791 config_quirk = 1; 1792 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_4)) { 1793 config_index = 4; 1794 config_quirk = 1; 1795 } else { 1796 config_index = 0; 1797 config_quirk = 0; 1798 } 1799 1800 set_config_failed = 0; 1801 repeat_set_config: 1802 1803 DPRINTF("setting config %u\n", config_index); 1804 1805 /* get the USB device configured */ 1806 err = usbd_set_config_index(udev, config_index); 1807 if (err) { 1808 if (udev->ddesc.bNumConfigurations != 0) { 1809 if (!set_config_failed) { 1810 set_config_failed = 1; 1811 /* XXX try to re-enumerate the device */ 1812 err = usbd_req_re_enumerate(udev, NULL); 1813 if (err == 0) 1814 goto repeat_set_config; 1815 } 1816 DPRINTFN(0, "Failure selecting configuration index %u:" 1817 "%s, port %u, addr %u (ignored)\n", 1818 config_index, usbd_errstr(err), udev->port_no, 1819 udev->address); 1820 } 1821 /* 1822 * Some USB devices do not have any configurations. Ignore any 1823 * set config failures! 1824 */ 1825 err = 0; 1826 goto config_done; 1827 } 1828 if (!config_quirk && config_index + 1 < udev->ddesc.bNumConfigurations) { 1829 if ((udev->cdesc->bNumInterface < 2) && 1830 usbd_get_no_descriptors(udev->cdesc, UDESC_ENDPOINT) == 0) { 1831 DPRINTFN(0, "Found no endpoints, trying next config\n"); 1832 config_index++; 1833 goto repeat_set_config; 1834 } 1835 if (config_index == 0) { 1836 /* 1837 * Try to figure out if we have an 1838 * auto-install disk there: 1839 */ 1840 if (usb_iface_is_cdrom(udev, 0)) { 1841 DPRINTFN(0, "Found possible auto-install " 1842 "disk (trying next config)\n"); 1843 config_index++; 1844 goto repeat_set_config; 1845 } 1846 } 1847 } 1848 EVENTHANDLER_INVOKE(usb_dev_configured, udev, &uaa); 1849 if (uaa.dev_state != UAA_DEV_READY) { 1850 /* leave device unconfigured */ 1851 usb_unconfigure(udev, 0); 1852 } 1853 1854 config_done: 1855 DPRINTF("new dev (addr %d), udev=%p, parent_hub=%p\n", 1856 udev->address, udev, udev->parent_hub); 1857 1858 /* register our device - we are ready */ 1859 usb_bus_port_set_device(bus, parent_hub ? 1860 parent_hub->hub->ports + port_index : NULL, udev, device_index); 1861 1862 #if USB_HAVE_UGEN 1863 /* Symlink the ugen device name */ 1864 udev->ugen_symlink = usb_alloc_symlink(udev->ugen_name); 1865 1866 /* Announce device */ 1867 printf("%s: <%s> at %s\n", udev->ugen_name, 1868 usb_get_manufacturer(udev), 1869 device_get_nameunit(udev->bus->bdev)); 1870 #endif 1871 1872 #if USB_HAVE_DEVCTL 1873 usb_notify_addq("ATTACH", udev); 1874 #endif 1875 done: 1876 if (err) { 1877 /* 1878 * Free USB device and all subdevices, if any. 1879 */ 1880 usb_free_device(udev, 0); 1881 udev = NULL; 1882 } 1883 return (udev); 1884 } 1885 1886 #if USB_HAVE_UGEN 1887 static struct cdev * 1888 usb_make_dev(struct usb_device *udev, int ep, int mode) 1889 { 1890 struct usb_fs_privdata* pd; 1891 char devname[20]; 1892 1893 /* Store information to locate ourselves again later */ 1894 pd = malloc(sizeof(struct usb_fs_privdata), M_USBDEV, 1895 M_WAITOK | M_ZERO); 1896 pd->bus_index = device_get_unit(udev->bus->bdev); 1897 pd->dev_index = udev->device_index; 1898 pd->ep_addr = ep; 1899 pd->mode = mode; 1900 1901 /* Now, create the device itself */ 1902 snprintf(devname, sizeof(devname), "%u.%u.%u", 1903 pd->bus_index, pd->dev_index, pd->ep_addr); 1904 pd->cdev = make_dev(&usb_devsw, 0, UID_ROOT, 1905 GID_OPERATOR, 0600, USB_DEVICE_DIR "/%s", devname); 1906 pd->cdev->si_drv1 = pd; 1907 1908 return (pd->cdev); 1909 } 1910 1911 static void 1912 usb_cdev_create(struct usb_device *udev) 1913 { 1914 struct usb_config_descriptor *cd; 1915 struct usb_endpoint_descriptor *ed; 1916 struct usb_descriptor *desc; 1917 struct usb_fs_privdata* pd; 1918 struct cdev *dev; 1919 int inmode, outmode, inmask, outmask, mode; 1920 uint8_t ep; 1921 1922 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("stale cdev entries")); 1923 1924 DPRINTFN(2, "Creating device nodes\n"); 1925 1926 if (usbd_get_mode(udev) == USB_MODE_DEVICE) { 1927 inmode = FWRITE; 1928 outmode = FREAD; 1929 } else { /* USB_MODE_HOST */ 1930 inmode = FREAD; 1931 outmode = FWRITE; 1932 } 1933 1934 inmask = 0; 1935 outmask = 0; 1936 desc = NULL; 1937 1938 /* 1939 * Collect all used endpoint numbers instead of just 1940 * generating 16 static endpoints. 1941 */ 1942 cd = usbd_get_config_descriptor(udev); 1943 while ((desc = usb_desc_foreach(cd, desc))) { 1944 /* filter out all endpoint descriptors */ 1945 if ((desc->bDescriptorType == UDESC_ENDPOINT) && 1946 (desc->bLength >= sizeof(*ed))) { 1947 ed = (struct usb_endpoint_descriptor *)desc; 1948 1949 /* update masks */ 1950 ep = ed->bEndpointAddress; 1951 if (UE_GET_DIR(ep) == UE_DIR_OUT) 1952 outmask |= 1 << UE_GET_ADDR(ep); 1953 else 1954 inmask |= 1 << UE_GET_ADDR(ep); 1955 } 1956 } 1957 1958 /* Create all available endpoints except EP0 */ 1959 for (ep = 1; ep < 16; ep++) { 1960 mode = inmask & (1 << ep) ? inmode : 0; 1961 mode |= outmask & (1 << ep) ? outmode : 0; 1962 if (mode == 0) 1963 continue; /* no IN or OUT endpoint */ 1964 1965 dev = usb_make_dev(udev, ep, mode); 1966 pd = dev->si_drv1; 1967 LIST_INSERT_HEAD(&udev->pd_list, pd, pd_next); 1968 } 1969 } 1970 1971 static void 1972 usb_cdev_free(struct usb_device *udev) 1973 { 1974 struct usb_fs_privdata* pd; 1975 struct cdev* pcdev; 1976 1977 DPRINTFN(2, "Freeing device nodes\n"); 1978 1979 while ((pd = LIST_FIRST(&udev->pd_list)) != NULL) { 1980 KASSERT(pd->cdev->si_drv1 == pd, ("privdata corrupt")); 1981 1982 pcdev = pd->cdev; 1983 pd->cdev = NULL; 1984 LIST_REMOVE(pd, pd_next); 1985 if (pcdev != NULL) 1986 destroy_dev_sched_cb(pcdev, usb_cdev_cleanup, pd); 1987 } 1988 } 1989 1990 static void 1991 usb_cdev_cleanup(void* arg) 1992 { 1993 free(arg, M_USBDEV); 1994 } 1995 #endif 1996 1997 /*------------------------------------------------------------------------* 1998 * usb_free_device 1999 * 2000 * This function is NULL safe and will free an USB device and its 2001 * children devices, if any. 2002 * 2003 * Flag values: Reserved, set to zero. 2004 *------------------------------------------------------------------------*/ 2005 void 2006 usb_free_device(struct usb_device *udev, uint8_t flag) 2007 { 2008 struct usb_bus *bus; 2009 2010 if (udev == NULL) 2011 return; /* already freed */ 2012 2013 DPRINTFN(4, "udev=%p port=%d\n", udev, udev->port_no); 2014 2015 bus = udev->bus; 2016 usb_set_device_state(udev, USB_STATE_DETACHED); 2017 2018 #if USB_HAVE_DEVCTL 2019 usb_notify_addq("DETACH", udev); 2020 #endif 2021 2022 #if USB_HAVE_UGEN 2023 printf("%s: <%s> at %s (disconnected)\n", udev->ugen_name, 2024 usb_get_manufacturer(udev), device_get_nameunit(bus->bdev)); 2025 2026 /* Destroy UGEN symlink, if any */ 2027 if (udev->ugen_symlink) { 2028 usb_free_symlink(udev->ugen_symlink); 2029 udev->ugen_symlink = NULL; 2030 } 2031 #endif 2032 /* 2033 * Unregister our device first which will prevent any further 2034 * references: 2035 */ 2036 usb_bus_port_set_device(bus, udev->parent_hub ? 2037 udev->parent_hub->hub->ports + udev->port_index : NULL, 2038 NULL, USB_ROOT_HUB_ADDR); 2039 2040 #if USB_HAVE_UGEN 2041 /* wait for all pending references to go away: */ 2042 mtx_lock(&usb_ref_lock); 2043 udev->refcount--; 2044 while (udev->refcount != 0) { 2045 cv_wait(&udev->ref_cv, &usb_ref_lock); 2046 } 2047 mtx_unlock(&usb_ref_lock); 2048 2049 destroy_dev_sched_cb(udev->ctrl_dev, usb_cdev_cleanup, 2050 udev->ctrl_dev->si_drv1); 2051 #endif 2052 2053 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2054 /* stop receiving any control transfers (Device Side Mode) */ 2055 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2056 } 2057 2058 /* the following will get the device unconfigured in software */ 2059 usb_unconfigure(udev, USB_UNCFG_FLAG_FREE_EP0); 2060 2061 /* unsetup any leftover default USB transfers */ 2062 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2063 2064 /* template unsetup, if any */ 2065 (usb_temp_unsetup_p) (udev); 2066 2067 /* 2068 * Make sure that our clear-stall messages are not queued 2069 * anywhere: 2070 */ 2071 USB_BUS_LOCK(udev->bus); 2072 usb_proc_mwait(&udev->bus->non_giant_callback_proc, 2073 &udev->cs_msg[0], &udev->cs_msg[1]); 2074 USB_BUS_UNLOCK(udev->bus); 2075 2076 sx_destroy(&udev->ctrl_sx); 2077 sx_destroy(&udev->enum_sx); 2078 sx_destroy(&udev->sr_sx); 2079 2080 cv_destroy(&udev->ctrlreq_cv); 2081 cv_destroy(&udev->ref_cv); 2082 2083 mtx_destroy(&udev->device_mtx); 2084 #if USB_HAVE_UGEN 2085 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("leaked cdev entries")); 2086 #endif 2087 2088 /* Uninitialise device */ 2089 if (bus->methods->device_uninit != NULL) 2090 (bus->methods->device_uninit) (udev); 2091 2092 /* free device */ 2093 free(udev->serial, M_USB); 2094 free(udev->manufacturer, M_USB); 2095 free(udev->product, M_USB); 2096 free(udev, M_USB); 2097 } 2098 2099 /*------------------------------------------------------------------------* 2100 * usbd_get_iface 2101 * 2102 * This function is the safe way to get the USB interface structure 2103 * pointer by interface index. 2104 * 2105 * Return values: 2106 * NULL: Interface not present. 2107 * Else: Pointer to USB interface structure. 2108 *------------------------------------------------------------------------*/ 2109 struct usb_interface * 2110 usbd_get_iface(struct usb_device *udev, uint8_t iface_index) 2111 { 2112 struct usb_interface *iface = udev->ifaces + iface_index; 2113 2114 if (iface_index >= udev->ifaces_max) 2115 return (NULL); 2116 return (iface); 2117 } 2118 2119 /*------------------------------------------------------------------------* 2120 * usbd_find_descriptor 2121 * 2122 * This function will lookup the first descriptor that matches the 2123 * criteria given by the arguments "type" and "subtype". Descriptors 2124 * will only be searched within the interface having the index 2125 * "iface_index". If the "id" argument points to an USB descriptor, 2126 * it will be skipped before the search is started. This allows 2127 * searching for multiple descriptors using the same criteria. Else 2128 * the search is started after the interface descriptor. 2129 * 2130 * Return values: 2131 * NULL: End of descriptors 2132 * Else: A descriptor matching the criteria 2133 *------------------------------------------------------------------------*/ 2134 void * 2135 usbd_find_descriptor(struct usb_device *udev, void *id, uint8_t iface_index, 2136 uint8_t type, uint8_t type_mask, 2137 uint8_t subtype, uint8_t subtype_mask) 2138 { 2139 struct usb_descriptor *desc; 2140 struct usb_config_descriptor *cd; 2141 struct usb_interface *iface; 2142 2143 cd = usbd_get_config_descriptor(udev); 2144 if (cd == NULL) { 2145 return (NULL); 2146 } 2147 if (id == NULL) { 2148 iface = usbd_get_iface(udev, iface_index); 2149 if (iface == NULL) { 2150 return (NULL); 2151 } 2152 id = usbd_get_interface_descriptor(iface); 2153 if (id == NULL) { 2154 return (NULL); 2155 } 2156 } 2157 desc = (void *)id; 2158 2159 while ((desc = usb_desc_foreach(cd, desc))) { 2160 2161 if (desc->bDescriptorType == UDESC_INTERFACE) { 2162 break; 2163 } 2164 if (((desc->bDescriptorType & type_mask) == type) && 2165 ((desc->bDescriptorSubtype & subtype_mask) == subtype)) { 2166 return (desc); 2167 } 2168 } 2169 return (NULL); 2170 } 2171 2172 /*------------------------------------------------------------------------* 2173 * usb_devinfo 2174 * 2175 * This function will dump information from the device descriptor 2176 * belonging to the USB device pointed to by "udev", to the string 2177 * pointed to by "dst_ptr" having a maximum length of "dst_len" bytes 2178 * including the terminating zero. 2179 *------------------------------------------------------------------------*/ 2180 void 2181 usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len) 2182 { 2183 struct usb_device_descriptor *udd = &udev->ddesc; 2184 uint16_t bcdDevice; 2185 uint16_t bcdUSB; 2186 2187 bcdUSB = UGETW(udd->bcdUSB); 2188 bcdDevice = UGETW(udd->bcdDevice); 2189 2190 if (udd->bDeviceClass != 0xFF) { 2191 snprintf(dst_ptr, dst_len, "%s %s, class %d/%d, rev %x.%02x/" 2192 "%x.%02x, addr %d", 2193 usb_get_manufacturer(udev), 2194 usb_get_product(udev), 2195 udd->bDeviceClass, udd->bDeviceSubClass, 2196 (bcdUSB >> 8), bcdUSB & 0xFF, 2197 (bcdDevice >> 8), bcdDevice & 0xFF, 2198 udev->address); 2199 } else { 2200 snprintf(dst_ptr, dst_len, "%s %s, rev %x.%02x/" 2201 "%x.%02x, addr %d", 2202 usb_get_manufacturer(udev), 2203 usb_get_product(udev), 2204 (bcdUSB >> 8), bcdUSB & 0xFF, 2205 (bcdDevice >> 8), bcdDevice & 0xFF, 2206 udev->address); 2207 } 2208 } 2209 2210 #ifdef USB_VERBOSE 2211 /* 2212 * Descriptions of of known vendors and devices ("products"). 2213 */ 2214 struct usb_knowndev { 2215 uint16_t vendor; 2216 uint16_t product; 2217 uint32_t flags; 2218 const char *vendorname; 2219 const char *productname; 2220 }; 2221 2222 #define USB_KNOWNDEV_NOPROD 0x01 /* match on vendor only */ 2223 2224 #include "usbdevs.h" 2225 #include "usbdevs_data.h" 2226 #endif /* USB_VERBOSE */ 2227 2228 static void 2229 usbd_set_device_strings(struct usb_device *udev) 2230 { 2231 struct usb_device_descriptor *udd = &udev->ddesc; 2232 #ifdef USB_VERBOSE 2233 const struct usb_knowndev *kdp; 2234 #endif 2235 char *temp_ptr; 2236 size_t temp_size; 2237 uint16_t vendor_id; 2238 uint16_t product_id; 2239 2240 temp_ptr = (char *)udev->bus->scratch[0].data; 2241 temp_size = sizeof(udev->bus->scratch[0].data); 2242 2243 vendor_id = UGETW(udd->idVendor); 2244 product_id = UGETW(udd->idProduct); 2245 2246 /* get serial number string */ 2247 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2248 udev->ddesc.iSerialNumber); 2249 udev->serial = strdup(temp_ptr, M_USB); 2250 2251 /* get manufacturer string */ 2252 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2253 udev->ddesc.iManufacturer); 2254 usb_trim_spaces(temp_ptr); 2255 if (temp_ptr[0] != '\0') 2256 udev->manufacturer = strdup(temp_ptr, M_USB); 2257 2258 /* get product string */ 2259 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2260 udev->ddesc.iProduct); 2261 usb_trim_spaces(temp_ptr); 2262 if (temp_ptr[0] != '\0') 2263 udev->product = strdup(temp_ptr, M_USB); 2264 2265 #ifdef USB_VERBOSE 2266 if (udev->manufacturer == NULL || udev->product == NULL) { 2267 for (kdp = usb_knowndevs; kdp->vendorname != NULL; kdp++) { 2268 if (kdp->vendor == vendor_id && 2269 (kdp->product == product_id || 2270 (kdp->flags & USB_KNOWNDEV_NOPROD) != 0)) 2271 break; 2272 } 2273 if (kdp->vendorname != NULL) { 2274 /* XXX should use pointer to knowndevs string */ 2275 if (udev->manufacturer == NULL) { 2276 udev->manufacturer = strdup(kdp->vendorname, 2277 M_USB); 2278 } 2279 if (udev->product == NULL && 2280 (kdp->flags & USB_KNOWNDEV_NOPROD) == 0) { 2281 udev->product = strdup(kdp->productname, 2282 M_USB); 2283 } 2284 } 2285 } 2286 #endif 2287 /* Provide default strings if none were found */ 2288 if (udev->manufacturer == NULL) { 2289 snprintf(temp_ptr, temp_size, "vendor 0x%04x", vendor_id); 2290 udev->manufacturer = strdup(temp_ptr, M_USB); 2291 } 2292 if (udev->product == NULL) { 2293 snprintf(temp_ptr, temp_size, "product 0x%04x", product_id); 2294 udev->product = strdup(temp_ptr, M_USB); 2295 } 2296 } 2297 2298 /* 2299 * Returns: 2300 * See: USB_MODE_XXX 2301 */ 2302 enum usb_hc_mode 2303 usbd_get_mode(struct usb_device *udev) 2304 { 2305 return (udev->flags.usb_mode); 2306 } 2307 2308 /* 2309 * Returns: 2310 * See: USB_SPEED_XXX 2311 */ 2312 enum usb_dev_speed 2313 usbd_get_speed(struct usb_device *udev) 2314 { 2315 return (udev->speed); 2316 } 2317 2318 uint32_t 2319 usbd_get_isoc_fps(struct usb_device *udev) 2320 { 2321 ; /* indent fix */ 2322 switch (udev->speed) { 2323 case USB_SPEED_LOW: 2324 case USB_SPEED_FULL: 2325 return (1000); 2326 default: 2327 return (8000); 2328 } 2329 } 2330 2331 struct usb_device_descriptor * 2332 usbd_get_device_descriptor(struct usb_device *udev) 2333 { 2334 if (udev == NULL) 2335 return (NULL); /* be NULL safe */ 2336 return (&udev->ddesc); 2337 } 2338 2339 struct usb_config_descriptor * 2340 usbd_get_config_descriptor(struct usb_device *udev) 2341 { 2342 if (udev == NULL) 2343 return (NULL); /* be NULL safe */ 2344 return (udev->cdesc); 2345 } 2346 2347 /*------------------------------------------------------------------------* 2348 * usb_test_quirk - test a device for a given quirk 2349 * 2350 * Return values: 2351 * 0: The USB device does not have the given quirk. 2352 * Else: The USB device has the given quirk. 2353 *------------------------------------------------------------------------*/ 2354 uint8_t 2355 usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk) 2356 { 2357 uint8_t found; 2358 2359 found = (usb_test_quirk_p) (&uaa->info, quirk); 2360 return (found); 2361 } 2362 2363 struct usb_interface_descriptor * 2364 usbd_get_interface_descriptor(struct usb_interface *iface) 2365 { 2366 if (iface == NULL) 2367 return (NULL); /* be NULL safe */ 2368 return (iface->idesc); 2369 } 2370 2371 uint8_t 2372 usbd_get_interface_altindex(struct usb_interface *iface) 2373 { 2374 return (iface->alt_index); 2375 } 2376 2377 uint8_t 2378 usbd_get_bus_index(struct usb_device *udev) 2379 { 2380 return ((uint8_t)device_get_unit(udev->bus->bdev)); 2381 } 2382 2383 uint8_t 2384 usbd_get_device_index(struct usb_device *udev) 2385 { 2386 return (udev->device_index); 2387 } 2388 2389 #if USB_HAVE_DEVCTL 2390 /*------------------------------------------------------------------------* 2391 * usb_notify_addq 2392 * 2393 * This function will generate events for dev. 2394 *------------------------------------------------------------------------*/ 2395 #ifndef BURN_BRIDGES 2396 static void 2397 usb_notify_addq_compat(const char *type, struct usb_device *udev) 2398 { 2399 char *data = NULL; 2400 const char *ntype; 2401 struct malloc_type *mt; 2402 const size_t buf_size = 512; 2403 2404 /* Convert notify type */ 2405 if (strcmp(type, "ATTACH") == 0) 2406 ntype = "+"; 2407 else if (strcmp(type, "DETACH") == 0) 2408 ntype = "-"; 2409 else 2410 return; 2411 2412 mtx_lock(&malloc_mtx); 2413 mt = malloc_desc2type("bus"); /* XXX M_BUS */ 2414 mtx_unlock(&malloc_mtx); 2415 if (mt == NULL) 2416 return; 2417 2418 data = malloc(buf_size, mt, M_NOWAIT); 2419 if (data == NULL) 2420 return; 2421 2422 /* String it all together. */ 2423 snprintf(data, buf_size, 2424 "%s" 2425 #if USB_HAVE_UGEN 2426 "%s " 2427 #endif 2428 "at port=%u " 2429 "vendor=0x%04x " 2430 "product=0x%04x " 2431 "devclass=0x%02x " 2432 "devsubclass=0x%02x " 2433 "sernum=\"%s\" " 2434 "release=0x%04x " 2435 #if USB_HAVE_UGEN 2436 "on %s\n" 2437 #endif 2438 "", 2439 ntype, 2440 #if USB_HAVE_UGEN 2441 udev->ugen_name, 2442 #endif 2443 udev->port_no, 2444 UGETW(udev->ddesc.idVendor), 2445 UGETW(udev->ddesc.idProduct), 2446 udev->ddesc.bDeviceClass, 2447 udev->ddesc.bDeviceSubClass, 2448 usb_get_serial(udev), 2449 UGETW(udev->ddesc.bcdDevice) 2450 #if USB_HAVE_UGEN 2451 , udev->parent_hub != NULL ? 2452 udev->parent_hub->ugen_name : 2453 device_get_nameunit(device_get_parent(udev->bus->bdev)) 2454 #endif 2455 ); 2456 2457 devctl_queue_data(data); 2458 } 2459 #endif 2460 2461 static void 2462 usb_notify_addq(const char *type, struct usb_device *udev) 2463 { 2464 struct usb_interface *iface; 2465 struct sbuf *sb; 2466 int i; 2467 2468 #ifndef BURN_BRIDGES 2469 usb_notify_addq_compat(type, udev); 2470 #endif 2471 2472 /* announce the device */ 2473 sb = sbuf_new_auto(); 2474 sbuf_printf(sb, 2475 #if USB_HAVE_UGEN 2476 "ugen=%s " 2477 "cdev=%s " 2478 #endif 2479 "vendor=0x%04x " 2480 "product=0x%04x " 2481 "devclass=0x%02x " 2482 "devsubclass=0x%02x " 2483 "sernum=\"%s\" " 2484 "release=0x%04x " 2485 "mode=%s " 2486 "port=%u " 2487 #if USB_HAVE_UGEN 2488 "parent=%s" 2489 #endif 2490 "", 2491 #if USB_HAVE_UGEN 2492 udev->ugen_name, 2493 udev->ugen_name, 2494 #endif 2495 UGETW(udev->ddesc.idVendor), 2496 UGETW(udev->ddesc.idProduct), 2497 udev->ddesc.bDeviceClass, 2498 udev->ddesc.bDeviceSubClass, 2499 usb_get_serial(udev), 2500 UGETW(udev->ddesc.bcdDevice), 2501 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2502 udev->port_no 2503 #if USB_HAVE_UGEN 2504 , udev->parent_hub != NULL ? 2505 udev->parent_hub->ugen_name : 2506 device_get_nameunit(device_get_parent(udev->bus->bdev)) 2507 #endif 2508 ); 2509 sbuf_finish(sb); 2510 devctl_notify("USB", "DEVICE", type, sbuf_data(sb)); 2511 sbuf_delete(sb); 2512 2513 /* announce each interface */ 2514 for (i = 0; i < USB_IFACE_MAX; i++) { 2515 iface = usbd_get_iface(udev, i); 2516 if (iface == NULL) 2517 break; /* end of interfaces */ 2518 if (iface->idesc == NULL) 2519 continue; /* no interface descriptor */ 2520 2521 sb = sbuf_new_auto(); 2522 sbuf_printf(sb, 2523 #if USB_HAVE_UGEN 2524 "ugen=%s " 2525 "cdev=%s " 2526 #endif 2527 "vendor=0x%04x " 2528 "product=0x%04x " 2529 "devclass=0x%02x " 2530 "devsubclass=0x%02x " 2531 "sernum=\"%s\" " 2532 "release=0x%04x " 2533 "mode=%s " 2534 "interface=%d " 2535 "endpoints=%d " 2536 "intclass=0x%02x " 2537 "intsubclass=0x%02x " 2538 "intprotocol=0x%02x", 2539 #if USB_HAVE_UGEN 2540 udev->ugen_name, 2541 udev->ugen_name, 2542 #endif 2543 UGETW(udev->ddesc.idVendor), 2544 UGETW(udev->ddesc.idProduct), 2545 udev->ddesc.bDeviceClass, 2546 udev->ddesc.bDeviceSubClass, 2547 usb_get_serial(udev), 2548 UGETW(udev->ddesc.bcdDevice), 2549 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2550 iface->idesc->bInterfaceNumber, 2551 iface->idesc->bNumEndpoints, 2552 iface->idesc->bInterfaceClass, 2553 iface->idesc->bInterfaceSubClass, 2554 iface->idesc->bInterfaceProtocol); 2555 sbuf_finish(sb); 2556 devctl_notify("USB", "INTERFACE", type, sbuf_data(sb)); 2557 sbuf_delete(sb); 2558 } 2559 } 2560 #endif 2561 2562 #if USB_HAVE_UGEN 2563 /*------------------------------------------------------------------------* 2564 * usb_fifo_free_wrap 2565 * 2566 * This function will free the FIFOs. 2567 * 2568 * Description of "flag" argument: If the USB_UNCFG_FLAG_FREE_EP0 flag 2569 * is set and "iface_index" is set to "USB_IFACE_INDEX_ANY", we free 2570 * all FIFOs. If the USB_UNCFG_FLAG_FREE_EP0 flag is not set and 2571 * "iface_index" is set to "USB_IFACE_INDEX_ANY", we free all non 2572 * control endpoint FIFOs. If "iface_index" is not set to 2573 * "USB_IFACE_INDEX_ANY" the flag has no effect. 2574 *------------------------------------------------------------------------*/ 2575 static void 2576 usb_fifo_free_wrap(struct usb_device *udev, 2577 uint8_t iface_index, uint8_t flag) 2578 { 2579 struct usb_fifo *f; 2580 uint16_t i; 2581 2582 /* 2583 * Free any USB FIFOs on the given interface: 2584 */ 2585 for (i = 0; i != USB_FIFO_MAX; i++) { 2586 f = udev->fifo[i]; 2587 if (f == NULL) { 2588 continue; 2589 } 2590 /* Check if the interface index matches */ 2591 if (iface_index == f->iface_index) { 2592 if (f->methods != &usb_ugen_methods) { 2593 /* 2594 * Don't free any non-generic FIFOs in 2595 * this case. 2596 */ 2597 continue; 2598 } 2599 if ((f->dev_ep_index == 0) && 2600 (f->fs_xfer == NULL)) { 2601 /* no need to free this FIFO */ 2602 continue; 2603 } 2604 } else if (iface_index == USB_IFACE_INDEX_ANY) { 2605 if ((f->methods == &usb_ugen_methods) && 2606 (f->dev_ep_index == 0) && 2607 (!(flag & USB_UNCFG_FLAG_FREE_EP0)) && 2608 (f->fs_xfer == NULL)) { 2609 /* no need to free this FIFO */ 2610 continue; 2611 } 2612 } else { 2613 /* no need to free this FIFO */ 2614 continue; 2615 } 2616 /* free this FIFO */ 2617 usb_fifo_free(f); 2618 } 2619 } 2620 #endif 2621 2622 /*------------------------------------------------------------------------* 2623 * usb_peer_can_wakeup 2624 * 2625 * Return values: 2626 * 0: Peer cannot do resume signalling. 2627 * Else: Peer can do resume signalling. 2628 *------------------------------------------------------------------------*/ 2629 uint8_t 2630 usb_peer_can_wakeup(struct usb_device *udev) 2631 { 2632 const struct usb_config_descriptor *cdp; 2633 2634 cdp = udev->cdesc; 2635 if ((cdp != NULL) && (udev->flags.usb_mode == USB_MODE_HOST)) { 2636 return (cdp->bmAttributes & UC_REMOTE_WAKEUP); 2637 } 2638 return (0); /* not supported */ 2639 } 2640 2641 void 2642 usb_set_device_state(struct usb_device *udev, enum usb_dev_state state) 2643 { 2644 2645 KASSERT(state < USB_STATE_MAX, ("invalid udev state")); 2646 2647 DPRINTF("udev %p state %s -> %s\n", udev, 2648 usb_statestr(udev->state), usb_statestr(state)); 2649 udev->state = state; 2650 2651 if (udev->bus->methods->device_state_change != NULL) 2652 (udev->bus->methods->device_state_change) (udev); 2653 } 2654 2655 enum usb_dev_state 2656 usb_get_device_state(struct usb_device *udev) 2657 { 2658 if (udev == NULL) 2659 return (USB_STATE_DETACHED); 2660 return (udev->state); 2661 } 2662 2663 uint8_t 2664 usbd_device_attached(struct usb_device *udev) 2665 { 2666 return (udev->state > USB_STATE_DETACHED); 2667 } 2668 2669 /* The following function locks enumerating the given USB device. */ 2670 2671 void 2672 usbd_enum_lock(struct usb_device *udev) 2673 { 2674 sx_xlock(&udev->enum_sx); 2675 sx_xlock(&udev->sr_sx); 2676 /* 2677 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2678 * are locked before locking Giant. Else the lock can be 2679 * locked multiple times. 2680 */ 2681 mtx_lock(&Giant); 2682 } 2683 2684 /* The following function unlocks enumerating the given USB device. */ 2685 2686 void 2687 usbd_enum_unlock(struct usb_device *udev) 2688 { 2689 mtx_unlock(&Giant); 2690 sx_xunlock(&udev->enum_sx); 2691 sx_xunlock(&udev->sr_sx); 2692 } 2693 2694 /* The following function locks suspend and resume. */ 2695 2696 void 2697 usbd_sr_lock(struct usb_device *udev) 2698 { 2699 sx_xlock(&udev->sr_sx); 2700 /* 2701 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2702 * are locked before locking Giant. Else the lock can be 2703 * locked multiple times. 2704 */ 2705 mtx_lock(&Giant); 2706 } 2707 2708 /* The following function unlocks suspend and resume. */ 2709 2710 void 2711 usbd_sr_unlock(struct usb_device *udev) 2712 { 2713 mtx_unlock(&Giant); 2714 sx_xunlock(&udev->sr_sx); 2715 } 2716 2717 /* 2718 * The following function checks the enumerating lock for the given 2719 * USB device. 2720 */ 2721 2722 uint8_t 2723 usbd_enum_is_locked(struct usb_device *udev) 2724 { 2725 return (sx_xlocked(&udev->enum_sx)); 2726 } 2727 2728 /* 2729 * The following function is used to set the per-interface specific 2730 * plug and play information. The string referred to by the pnpinfo 2731 * argument can safely be freed after calling this function. The 2732 * pnpinfo of an interface will be reset at device detach or when 2733 * passing a NULL argument to this function. This function 2734 * returns zero on success, else a USB_ERR_XXX failure code. 2735 */ 2736 2737 usb_error_t 2738 usbd_set_pnpinfo(struct usb_device *udev, uint8_t iface_index, const char *pnpinfo) 2739 { 2740 struct usb_interface *iface; 2741 2742 iface = usbd_get_iface(udev, iface_index); 2743 if (iface == NULL) 2744 return (USB_ERR_INVAL); 2745 2746 if (iface->pnpinfo != NULL) { 2747 free(iface->pnpinfo, M_USBDEV); 2748 iface->pnpinfo = NULL; 2749 } 2750 2751 if (pnpinfo == NULL || pnpinfo[0] == 0) 2752 return (0); /* success */ 2753 2754 iface->pnpinfo = strdup(pnpinfo, M_USBDEV); 2755 if (iface->pnpinfo == NULL) 2756 return (USB_ERR_NOMEM); 2757 2758 return (0); /* success */ 2759 } 2760 2761