1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 24 * SUCH DAMAGE. 25 */ 26 27 #ifdef USB_GLOBAL_INCLUDE_FILE 28 #include USB_GLOBAL_INCLUDE_FILE 29 #else 30 #include <sys/stdint.h> 31 #include <sys/stddef.h> 32 #include <sys/param.h> 33 #include <sys/queue.h> 34 #include <sys/types.h> 35 #include <sys/systm.h> 36 #include <sys/kernel.h> 37 #include <sys/bus.h> 38 #include <sys/module.h> 39 #include <sys/lock.h> 40 #include <sys/mutex.h> 41 #include <sys/condvar.h> 42 #include <sys/sysctl.h> 43 #include <sys/sx.h> 44 #include <sys/unistd.h> 45 #include <sys/callout.h> 46 #include <sys/malloc.h> 47 #include <sys/priv.h> 48 #include <sys/conf.h> 49 #include <sys/fcntl.h> 50 51 #include <dev/usb/usb.h> 52 #include <dev/usb/usbdi.h> 53 #include <dev/usb/usbdi_util.h> 54 #include <dev/usb/usb_ioctl.h> 55 56 #if USB_HAVE_UGEN 57 #include <sys/sbuf.h> 58 #endif 59 60 #include "usbdevs.h" 61 62 #define USB_DEBUG_VAR usb_debug 63 64 #include <dev/usb/usb_core.h> 65 #include <dev/usb/usb_debug.h> 66 #include <dev/usb/usb_process.h> 67 #include <dev/usb/usb_device.h> 68 #include <dev/usb/usb_busdma.h> 69 #include <dev/usb/usb_transfer.h> 70 #include <dev/usb/usb_request.h> 71 #include <dev/usb/usb_dynamic.h> 72 #include <dev/usb/usb_hub.h> 73 #include <dev/usb/usb_util.h> 74 #include <dev/usb/usb_msctest.h> 75 #if USB_HAVE_UGEN 76 #include <dev/usb/usb_dev.h> 77 #include <dev/usb/usb_generic.h> 78 #endif 79 80 #include <dev/usb/quirk/usb_quirk.h> 81 82 #include <dev/usb/usb_controller.h> 83 #include <dev/usb/usb_bus.h> 84 #endif /* USB_GLOBAL_INCLUDE_FILE */ 85 86 /* function prototypes */ 87 88 static void usb_init_endpoint(struct usb_device *, uint8_t, 89 struct usb_endpoint_descriptor *, 90 struct usb_endpoint_ss_comp_descriptor *, 91 struct usb_endpoint *); 92 static void usb_unconfigure(struct usb_device *, uint8_t); 93 static void usb_detach_device_sub(struct usb_device *, device_t *, 94 char **, uint8_t); 95 static uint8_t usb_probe_and_attach_sub(struct usb_device *, 96 struct usb_attach_arg *); 97 static void usb_init_attach_arg(struct usb_device *, 98 struct usb_attach_arg *); 99 static void usb_suspend_resume_sub(struct usb_device *, device_t, 100 uint8_t); 101 static usb_proc_callback_t usbd_clear_stall_proc; 102 static usb_error_t usb_config_parse(struct usb_device *, uint8_t, uint8_t); 103 static void usbd_set_device_strings(struct usb_device *); 104 #if USB_HAVE_DEVCTL 105 static void usb_notify_addq(const char *type, struct usb_device *); 106 #endif 107 #if USB_HAVE_UGEN 108 static void usb_fifo_free_wrap(struct usb_device *, uint8_t, uint8_t); 109 static void usb_cdev_create(struct usb_device *); 110 static void usb_cdev_free(struct usb_device *); 111 #endif 112 113 /* This variable is global to allow easy access to it: */ 114 115 #ifdef USB_TEMPLATE 116 int usb_template = USB_TEMPLATE; 117 #else 118 int usb_template; 119 #endif 120 121 SYSCTL_INT(_hw_usb, OID_AUTO, template, CTLFLAG_RWTUN, 122 &usb_template, 0, "Selected USB device side template"); 123 124 /* English is default language */ 125 126 static int usb_lang_id = 0x0009; 127 static int usb_lang_mask = 0x00FF; 128 129 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_id, CTLFLAG_RWTUN, 130 &usb_lang_id, 0, "Preferred USB language ID"); 131 132 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_mask, CTLFLAG_RWTUN, 133 &usb_lang_mask, 0, "Preferred USB language mask"); 134 135 static const char* statestr[USB_STATE_MAX] = { 136 [USB_STATE_DETACHED] = "DETACHED", 137 [USB_STATE_ATTACHED] = "ATTACHED", 138 [USB_STATE_POWERED] = "POWERED", 139 [USB_STATE_ADDRESSED] = "ADDRESSED", 140 [USB_STATE_CONFIGURED] = "CONFIGURED", 141 }; 142 143 const char * 144 usb_statestr(enum usb_dev_state state) 145 { 146 return ((state < USB_STATE_MAX) ? statestr[state] : "UNKNOWN"); 147 } 148 149 const char * 150 usb_get_manufacturer(struct usb_device *udev) 151 { 152 return (udev->manufacturer ? udev->manufacturer : "Unknown"); 153 } 154 155 const char * 156 usb_get_product(struct usb_device *udev) 157 { 158 return (udev->product ? udev->product : ""); 159 } 160 161 const char * 162 usb_get_serial(struct usb_device *udev) 163 { 164 return (udev->serial ? udev->serial : ""); 165 } 166 167 /*------------------------------------------------------------------------* 168 * usbd_get_ep_by_addr 169 * 170 * This function searches for an USB ep by endpoint address and 171 * direction. 172 * 173 * Returns: 174 * NULL: Failure 175 * Else: Success 176 *------------------------------------------------------------------------*/ 177 struct usb_endpoint * 178 usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val) 179 { 180 struct usb_endpoint *ep = udev->endpoints; 181 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 182 enum { 183 EA_MASK = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR), 184 }; 185 186 /* 187 * According to the USB specification not all bits are used 188 * for the endpoint address. Keep defined bits only: 189 */ 190 ea_val &= EA_MASK; 191 192 /* 193 * Iterate accross all the USB endpoints searching for a match 194 * based on the endpoint address: 195 */ 196 for (; ep != ep_end; ep++) { 197 198 if (ep->edesc == NULL) { 199 continue; 200 } 201 /* do the mask and check the value */ 202 if ((ep->edesc->bEndpointAddress & EA_MASK) == ea_val) { 203 goto found; 204 } 205 } 206 207 /* 208 * The default endpoint is always present and is checked separately: 209 */ 210 if ((udev->ctrl_ep.edesc != NULL) && 211 ((udev->ctrl_ep.edesc->bEndpointAddress & EA_MASK) == ea_val)) { 212 ep = &udev->ctrl_ep; 213 goto found; 214 } 215 return (NULL); 216 217 found: 218 return (ep); 219 } 220 221 /*------------------------------------------------------------------------* 222 * usbd_get_endpoint 223 * 224 * This function searches for an USB endpoint based on the information 225 * given by the passed "struct usb_config" pointer. 226 * 227 * Return values: 228 * NULL: No match. 229 * Else: Pointer to "struct usb_endpoint". 230 *------------------------------------------------------------------------*/ 231 struct usb_endpoint * 232 usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 233 const struct usb_config *setup) 234 { 235 struct usb_endpoint *ep = udev->endpoints; 236 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 237 uint8_t index = setup->ep_index; 238 uint8_t ea_mask; 239 uint8_t ea_val; 240 uint8_t type_mask; 241 uint8_t type_val; 242 243 DPRINTFN(10, "udev=%p iface_index=%d address=0x%x " 244 "type=0x%x dir=0x%x index=%d\n", 245 udev, iface_index, setup->endpoint, 246 setup->type, setup->direction, setup->ep_index); 247 248 /* check USB mode */ 249 250 if (setup->usb_mode != USB_MODE_DUAL && 251 udev->flags.usb_mode != setup->usb_mode) { 252 /* wrong mode - no endpoint */ 253 return (NULL); 254 } 255 256 /* setup expected endpoint direction mask and value */ 257 258 if (setup->direction == UE_DIR_RX) { 259 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 260 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 261 UE_DIR_OUT : UE_DIR_IN; 262 } else if (setup->direction == UE_DIR_TX) { 263 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 264 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 265 UE_DIR_IN : UE_DIR_OUT; 266 } else if (setup->direction == UE_DIR_ANY) { 267 /* match any endpoint direction */ 268 ea_mask = 0; 269 ea_val = 0; 270 } else { 271 /* match the given endpoint direction */ 272 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 273 ea_val = (setup->direction & (UE_DIR_IN | UE_DIR_OUT)); 274 } 275 276 /* setup expected endpoint address */ 277 278 if (setup->endpoint == UE_ADDR_ANY) { 279 /* match any endpoint address */ 280 } else { 281 /* match the given endpoint address */ 282 ea_mask |= UE_ADDR; 283 ea_val |= (setup->endpoint & UE_ADDR); 284 } 285 286 /* setup expected endpoint type */ 287 288 if (setup->type == UE_BULK_INTR) { 289 /* this will match BULK and INTERRUPT endpoints */ 290 type_mask = 2; 291 type_val = 2; 292 } else if (setup->type == UE_TYPE_ANY) { 293 /* match any endpoint type */ 294 type_mask = 0; 295 type_val = 0; 296 } else { 297 /* match the given endpoint type */ 298 type_mask = UE_XFERTYPE; 299 type_val = (setup->type & UE_XFERTYPE); 300 } 301 302 /* 303 * Iterate accross all the USB endpoints searching for a match 304 * based on the endpoint address. Note that we are searching 305 * the endpoints from the beginning of the "udev->endpoints" array. 306 */ 307 for (; ep != ep_end; ep++) { 308 309 if ((ep->edesc == NULL) || 310 (ep->iface_index != iface_index)) { 311 continue; 312 } 313 /* do the masks and check the values */ 314 315 if (((ep->edesc->bEndpointAddress & ea_mask) == ea_val) && 316 ((ep->edesc->bmAttributes & type_mask) == type_val)) { 317 if (!index--) { 318 goto found; 319 } 320 } 321 } 322 323 /* 324 * Match against default endpoint last, so that "any endpoint", "any 325 * address" and "any direction" returns the first endpoint of the 326 * interface. "iface_index" and "direction" is ignored: 327 */ 328 if ((udev->ctrl_ep.edesc != NULL) && 329 ((udev->ctrl_ep.edesc->bEndpointAddress & ea_mask) == ea_val) && 330 ((udev->ctrl_ep.edesc->bmAttributes & type_mask) == type_val) && 331 (!index)) { 332 ep = &udev->ctrl_ep; 333 goto found; 334 } 335 return (NULL); 336 337 found: 338 return (ep); 339 } 340 341 /*------------------------------------------------------------------------* 342 * usbd_interface_count 343 * 344 * This function stores the number of USB interfaces excluding 345 * alternate settings, which the USB config descriptor reports into 346 * the unsigned 8-bit integer pointed to by "count". 347 * 348 * Returns: 349 * 0: Success 350 * Else: Failure 351 *------------------------------------------------------------------------*/ 352 usb_error_t 353 usbd_interface_count(struct usb_device *udev, uint8_t *count) 354 { 355 if (udev->cdesc == NULL) { 356 *count = 0; 357 return (USB_ERR_NOT_CONFIGURED); 358 } 359 *count = udev->ifaces_max; 360 return (USB_ERR_NORMAL_COMPLETION); 361 } 362 363 /*------------------------------------------------------------------------* 364 * usb_init_endpoint 365 * 366 * This function will initialise the USB endpoint structure pointed to by 367 * the "endpoint" argument. The structure pointed to by "endpoint" must be 368 * zeroed before calling this function. 369 *------------------------------------------------------------------------*/ 370 static void 371 usb_init_endpoint(struct usb_device *udev, uint8_t iface_index, 372 struct usb_endpoint_descriptor *edesc, 373 struct usb_endpoint_ss_comp_descriptor *ecomp, 374 struct usb_endpoint *ep) 375 { 376 const struct usb_bus_methods *methods; 377 usb_stream_t x; 378 379 methods = udev->bus->methods; 380 381 (methods->endpoint_init) (udev, edesc, ep); 382 383 /* initialise USB endpoint structure */ 384 ep->edesc = edesc; 385 ep->ecomp = ecomp; 386 ep->iface_index = iface_index; 387 388 /* setup USB stream queues */ 389 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 390 TAILQ_INIT(&ep->endpoint_q[x].head); 391 ep->endpoint_q[x].command = &usbd_pipe_start; 392 } 393 394 /* the pipe is not supported by the hardware */ 395 if (ep->methods == NULL) 396 return; 397 398 /* check for SUPER-speed streams mode endpoint */ 399 if (udev->speed == USB_SPEED_SUPER && ecomp != NULL && 400 (edesc->bmAttributes & UE_XFERTYPE) == UE_BULK && 401 (UE_GET_BULK_STREAMS(ecomp->bmAttributes) != 0)) { 402 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_STREAMS); 403 } else { 404 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_DEFAULT); 405 } 406 407 /* clear stall, if any */ 408 if (methods->clear_stall != NULL) { 409 USB_BUS_LOCK(udev->bus); 410 (methods->clear_stall) (udev, ep); 411 USB_BUS_UNLOCK(udev->bus); 412 } 413 } 414 415 /*-----------------------------------------------------------------------* 416 * usb_endpoint_foreach 417 * 418 * This function will iterate all the USB endpoints except the control 419 * endpoint. This function is NULL safe. 420 * 421 * Return values: 422 * NULL: End of USB endpoints 423 * Else: Pointer to next USB endpoint 424 *------------------------------------------------------------------------*/ 425 struct usb_endpoint * 426 usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep) 427 { 428 struct usb_endpoint *ep_end; 429 430 /* be NULL safe */ 431 if (udev == NULL) 432 return (NULL); 433 434 ep_end = udev->endpoints + udev->endpoints_max; 435 436 /* get next endpoint */ 437 if (ep == NULL) 438 ep = udev->endpoints; 439 else 440 ep++; 441 442 /* find next allocated ep */ 443 while (ep != ep_end) { 444 if (ep->edesc != NULL) 445 return (ep); 446 ep++; 447 } 448 return (NULL); 449 } 450 451 /*------------------------------------------------------------------------* 452 * usb_wait_pending_refs 453 * 454 * This function will wait for any USB references to go away before 455 * returning. This function is used before freeing a USB device. 456 *------------------------------------------------------------------------*/ 457 static void 458 usb_wait_pending_refs(struct usb_device *udev) 459 { 460 #if USB_HAVE_UGEN 461 DPRINTF("Refcount = %d\n", (int)udev->refcount); 462 463 mtx_lock(&usb_ref_lock); 464 udev->refcount--; 465 while (1) { 466 /* wait for any pending references to go away */ 467 if (udev->refcount == 0) { 468 /* prevent further refs being taken, if any */ 469 udev->refcount = USB_DEV_REF_MAX; 470 break; 471 } 472 cv_wait(&udev->ref_cv, &usb_ref_lock); 473 } 474 mtx_unlock(&usb_ref_lock); 475 #endif 476 } 477 478 /*------------------------------------------------------------------------* 479 * usb_unconfigure 480 * 481 * This function will free all USB interfaces and USB endpoints belonging 482 * to an USB device. 483 * 484 * Flag values, see "USB_UNCFG_FLAG_XXX". 485 *------------------------------------------------------------------------*/ 486 static void 487 usb_unconfigure(struct usb_device *udev, uint8_t flag) 488 { 489 uint8_t do_unlock; 490 491 /* Prevent re-enumeration */ 492 do_unlock = usbd_enum_lock(udev); 493 494 /* detach all interface drivers */ 495 usb_detach_device(udev, USB_IFACE_INDEX_ANY, flag); 496 497 #if USB_HAVE_UGEN 498 /* free all FIFOs except control endpoint FIFOs */ 499 usb_fifo_free_wrap(udev, USB_IFACE_INDEX_ANY, flag); 500 501 /* 502 * Free all cdev's, if any. 503 */ 504 usb_cdev_free(udev); 505 #endif 506 507 #if USB_HAVE_COMPAT_LINUX 508 /* free Linux compat device, if any */ 509 if (udev->linux_endpoint_start) { 510 usb_linux_free_device(udev); 511 udev->linux_endpoint_start = NULL; 512 } 513 #endif 514 515 usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_FREE); 516 517 /* free "cdesc" after "ifaces" and "endpoints", if any */ 518 if (udev->cdesc != NULL) { 519 if (udev->flags.usb_mode != USB_MODE_DEVICE) 520 usbd_free_config_desc(udev, udev->cdesc); 521 udev->cdesc = NULL; 522 } 523 /* set unconfigured state */ 524 udev->curr_config_no = USB_UNCONFIG_NO; 525 udev->curr_config_index = USB_UNCONFIG_INDEX; 526 527 if (do_unlock) 528 usbd_enum_unlock(udev); 529 } 530 531 /*------------------------------------------------------------------------* 532 * usbd_set_config_index 533 * 534 * This function selects configuration by index, independent of the 535 * actual configuration number. This function should not be used by 536 * USB drivers. 537 * 538 * Returns: 539 * 0: Success 540 * Else: Failure 541 *------------------------------------------------------------------------*/ 542 usb_error_t 543 usbd_set_config_index(struct usb_device *udev, uint8_t index) 544 { 545 struct usb_status ds; 546 struct usb_config_descriptor *cdp; 547 uint16_t power; 548 uint16_t max_power; 549 uint8_t selfpowered; 550 uint8_t do_unlock; 551 usb_error_t err; 552 553 DPRINTFN(6, "udev=%p index=%d\n", udev, index); 554 555 /* Prevent re-enumeration */ 556 do_unlock = usbd_enum_lock(udev); 557 558 usb_unconfigure(udev, 0); 559 560 if (index == USB_UNCONFIG_INDEX) { 561 /* 562 * Leave unallocated when unconfiguring the 563 * device. "usb_unconfigure()" will also reset 564 * the current config number and index. 565 */ 566 err = usbd_req_set_config(udev, NULL, USB_UNCONFIG_NO); 567 if (udev->state == USB_STATE_CONFIGURED) 568 usb_set_device_state(udev, USB_STATE_ADDRESSED); 569 goto done; 570 } 571 /* get the full config descriptor */ 572 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 573 /* save some memory */ 574 err = usbd_req_get_descriptor_ptr(udev, &cdp, 575 (UDESC_CONFIG << 8) | index); 576 } else { 577 /* normal request */ 578 err = usbd_req_get_config_desc_full(udev, 579 NULL, &cdp, index); 580 } 581 if (err) { 582 goto done; 583 } 584 /* set the new config descriptor */ 585 586 udev->cdesc = cdp; 587 588 /* Figure out if the device is self or bus powered. */ 589 selfpowered = 0; 590 if ((!udev->flags.uq_bus_powered) && 591 (cdp->bmAttributes & UC_SELF_POWERED) && 592 (udev->flags.usb_mode == USB_MODE_HOST)) { 593 /* May be self powered. */ 594 if (cdp->bmAttributes & UC_BUS_POWERED) { 595 /* Must ask device. */ 596 err = usbd_req_get_device_status(udev, NULL, &ds); 597 if (err) { 598 DPRINTFN(0, "could not read " 599 "device status: %s\n", 600 usbd_errstr(err)); 601 } else if (UGETW(ds.wStatus) & UDS_SELF_POWERED) { 602 selfpowered = 1; 603 } 604 DPRINTF("status=0x%04x \n", 605 UGETW(ds.wStatus)); 606 } else 607 selfpowered = 1; 608 } 609 DPRINTF("udev=%p cdesc=%p (addr %d) cno=%d attr=0x%02x, " 610 "selfpowered=%d, power=%d\n", 611 udev, cdp, 612 udev->address, cdp->bConfigurationValue, cdp->bmAttributes, 613 selfpowered, cdp->bMaxPower * 2); 614 615 /* Check if we have enough power. */ 616 power = cdp->bMaxPower * 2; 617 618 if (udev->parent_hub) { 619 max_power = udev->parent_hub->hub->portpower; 620 } else { 621 max_power = USB_MAX_POWER; 622 } 623 624 if (power > max_power) { 625 DPRINTFN(0, "power exceeded %d > %d\n", power, max_power); 626 err = USB_ERR_NO_POWER; 627 goto done; 628 } 629 /* Only update "self_powered" in USB Host Mode */ 630 if (udev->flags.usb_mode == USB_MODE_HOST) { 631 udev->flags.self_powered = selfpowered; 632 } 633 udev->power = power; 634 udev->curr_config_no = cdp->bConfigurationValue; 635 udev->curr_config_index = index; 636 usb_set_device_state(udev, USB_STATE_CONFIGURED); 637 638 /* Set the actual configuration value. */ 639 err = usbd_req_set_config(udev, NULL, cdp->bConfigurationValue); 640 if (err) { 641 goto done; 642 } 643 644 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_ALLOC); 645 if (err) { 646 goto done; 647 } 648 649 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_INIT); 650 if (err) { 651 goto done; 652 } 653 654 #if USB_HAVE_UGEN 655 /* create device nodes for each endpoint */ 656 usb_cdev_create(udev); 657 #endif 658 659 done: 660 DPRINTF("error=%s\n", usbd_errstr(err)); 661 if (err) { 662 usb_unconfigure(udev, 0); 663 } 664 if (do_unlock) 665 usbd_enum_unlock(udev); 666 return (err); 667 } 668 669 /*------------------------------------------------------------------------* 670 * usb_config_parse 671 * 672 * This function will allocate and free USB interfaces and USB endpoints, 673 * parse the USB configuration structure and initialise the USB endpoints 674 * and interfaces. If "iface_index" is not equal to 675 * "USB_IFACE_INDEX_ANY" then the "cmd" parameter is the 676 * alternate_setting to be selected for the given interface. Else the 677 * "cmd" parameter is defined by "USB_CFG_XXX". "iface_index" can be 678 * "USB_IFACE_INDEX_ANY" or a valid USB interface index. This function 679 * is typically called when setting the configuration or when setting 680 * an alternate interface. 681 * 682 * Returns: 683 * 0: Success 684 * Else: Failure 685 *------------------------------------------------------------------------*/ 686 static usb_error_t 687 usb_config_parse(struct usb_device *udev, uint8_t iface_index, uint8_t cmd) 688 { 689 struct usb_idesc_parse_state ips; 690 struct usb_interface_descriptor *id; 691 struct usb_endpoint_descriptor *ed; 692 struct usb_interface *iface; 693 struct usb_endpoint *ep; 694 usb_error_t err; 695 uint8_t ep_curr; 696 uint8_t ep_max; 697 uint8_t temp; 698 uint8_t do_init; 699 uint8_t alt_index; 700 701 if (iface_index != USB_IFACE_INDEX_ANY) { 702 /* parameter overload */ 703 alt_index = cmd; 704 cmd = USB_CFG_INIT; 705 } else { 706 /* not used */ 707 alt_index = 0; 708 } 709 710 err = 0; 711 712 DPRINTFN(5, "iface_index=%d cmd=%d\n", 713 iface_index, cmd); 714 715 if (cmd == USB_CFG_FREE) 716 goto cleanup; 717 718 if (cmd == USB_CFG_INIT) { 719 sx_assert(&udev->enum_sx, SA_LOCKED); 720 721 /* check for in-use endpoints */ 722 723 ep = udev->endpoints; 724 ep_max = udev->endpoints_max; 725 while (ep_max--) { 726 /* look for matching endpoints */ 727 if ((iface_index == USB_IFACE_INDEX_ANY) || 728 (iface_index == ep->iface_index)) { 729 if (ep->refcount_alloc != 0) { 730 /* 731 * This typically indicates a 732 * more serious error. 733 */ 734 err = USB_ERR_IN_USE; 735 } else { 736 /* reset endpoint */ 737 memset(ep, 0, sizeof(*ep)); 738 /* make sure we don't zero the endpoint again */ 739 ep->iface_index = USB_IFACE_INDEX_ANY; 740 } 741 } 742 ep++; 743 } 744 745 if (err) 746 return (err); 747 } 748 749 memset(&ips, 0, sizeof(ips)); 750 751 ep_curr = 0; 752 ep_max = 0; 753 754 while ((id = usb_idesc_foreach(udev->cdesc, &ips))) { 755 756 iface = udev->ifaces + ips.iface_index; 757 758 /* check for specific interface match */ 759 760 if (cmd == USB_CFG_INIT) { 761 if ((iface_index != USB_IFACE_INDEX_ANY) && 762 (iface_index != ips.iface_index)) { 763 /* wrong interface */ 764 do_init = 0; 765 } else if (alt_index != ips.iface_index_alt) { 766 /* wrong alternate setting */ 767 do_init = 0; 768 } else { 769 /* initialise interface */ 770 do_init = 1; 771 } 772 } else 773 do_init = 0; 774 775 /* check for new interface */ 776 if (ips.iface_index_alt == 0) { 777 /* update current number of endpoints */ 778 ep_curr = ep_max; 779 } 780 /* check for init */ 781 if (do_init) { 782 /* setup the USB interface structure */ 783 iface->idesc = id; 784 /* set alternate index */ 785 iface->alt_index = alt_index; 786 /* set default interface parent */ 787 if (iface_index == USB_IFACE_INDEX_ANY) { 788 iface->parent_iface_index = 789 USB_IFACE_INDEX_ANY; 790 } 791 } 792 793 DPRINTFN(5, "found idesc nendpt=%d\n", id->bNumEndpoints); 794 795 ed = (struct usb_endpoint_descriptor *)id; 796 797 temp = ep_curr; 798 799 /* iterate all the endpoint descriptors */ 800 while ((ed = usb_edesc_foreach(udev->cdesc, ed))) { 801 802 /* check if endpoint limit has been reached */ 803 if (temp >= USB_MAX_EP_UNITS) { 804 DPRINTF("Endpoint limit reached\n"); 805 break; 806 } 807 808 ep = udev->endpoints + temp; 809 810 if (do_init) { 811 void *ecomp; 812 813 ecomp = usb_ed_comp_foreach(udev->cdesc, (void *)ed); 814 if (ecomp != NULL) 815 DPRINTFN(5, "Found endpoint companion descriptor\n"); 816 817 usb_init_endpoint(udev, 818 ips.iface_index, ed, ecomp, ep); 819 } 820 821 temp ++; 822 823 /* find maximum number of endpoints */ 824 if (ep_max < temp) 825 ep_max = temp; 826 } 827 } 828 829 /* NOTE: It is valid to have no interfaces and no endpoints! */ 830 831 if (cmd == USB_CFG_ALLOC) { 832 udev->ifaces_max = ips.iface_index; 833 #if (USB_HAVE_FIXED_IFACE == 0) 834 udev->ifaces = NULL; 835 if (udev->ifaces_max != 0) { 836 udev->ifaces = malloc(sizeof(*iface) * udev->ifaces_max, 837 M_USB, M_WAITOK | M_ZERO); 838 if (udev->ifaces == NULL) { 839 err = USB_ERR_NOMEM; 840 goto done; 841 } 842 } 843 #endif 844 #if (USB_HAVE_FIXED_ENDPOINT == 0) 845 if (ep_max != 0) { 846 udev->endpoints = malloc(sizeof(*ep) * ep_max, 847 M_USB, M_WAITOK | M_ZERO); 848 if (udev->endpoints == NULL) { 849 err = USB_ERR_NOMEM; 850 goto done; 851 } 852 } else { 853 udev->endpoints = NULL; 854 } 855 #endif 856 USB_BUS_LOCK(udev->bus); 857 udev->endpoints_max = ep_max; 858 /* reset any ongoing clear-stall */ 859 udev->ep_curr = NULL; 860 USB_BUS_UNLOCK(udev->bus); 861 } 862 #if (USB_HAVE_FIXED_IFACE == 0) || (USB_HAVE_FIXED_ENDPOINT == 0) 863 done: 864 #endif 865 if (err) { 866 if (cmd == USB_CFG_ALLOC) { 867 cleanup: 868 USB_BUS_LOCK(udev->bus); 869 udev->endpoints_max = 0; 870 /* reset any ongoing clear-stall */ 871 udev->ep_curr = NULL; 872 USB_BUS_UNLOCK(udev->bus); 873 874 #if (USB_HAVE_FIXED_IFACE == 0) 875 free(udev->ifaces, M_USB); 876 udev->ifaces = NULL; 877 #endif 878 #if (USB_HAVE_FIXED_ENDPOINT == 0) 879 free(udev->endpoints, M_USB); 880 udev->endpoints = NULL; 881 #endif 882 udev->ifaces_max = 0; 883 } 884 } 885 return (err); 886 } 887 888 /*------------------------------------------------------------------------* 889 * usbd_set_alt_interface_index 890 * 891 * This function will select an alternate interface index for the 892 * given interface index. The interface should not be in use when this 893 * function is called. That means there should not be any open USB 894 * transfers. Else an error is returned. If the alternate setting is 895 * already set this function will simply return success. This function 896 * is called in Host mode and Device mode! 897 * 898 * Returns: 899 * 0: Success 900 * Else: Failure 901 *------------------------------------------------------------------------*/ 902 usb_error_t 903 usbd_set_alt_interface_index(struct usb_device *udev, 904 uint8_t iface_index, uint8_t alt_index) 905 { 906 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 907 usb_error_t err; 908 uint8_t do_unlock; 909 910 /* Prevent re-enumeration */ 911 do_unlock = usbd_enum_lock(udev); 912 913 if (iface == NULL) { 914 err = USB_ERR_INVAL; 915 goto done; 916 } 917 if (iface->alt_index == alt_index) { 918 /* 919 * Optimise away duplicate setting of 920 * alternate setting in USB Host Mode! 921 */ 922 err = 0; 923 goto done; 924 } 925 #if USB_HAVE_UGEN 926 /* 927 * Free all generic FIFOs for this interface, except control 928 * endpoint FIFOs: 929 */ 930 usb_fifo_free_wrap(udev, iface_index, 0); 931 #endif 932 933 err = usb_config_parse(udev, iface_index, alt_index); 934 if (err) { 935 goto done; 936 } 937 if (iface->alt_index != alt_index) { 938 /* the alternate setting does not exist */ 939 err = USB_ERR_INVAL; 940 goto done; 941 } 942 943 err = usbd_req_set_alt_interface_no(udev, NULL, iface_index, 944 iface->idesc->bAlternateSetting); 945 946 done: 947 if (do_unlock) 948 usbd_enum_unlock(udev); 949 return (err); 950 } 951 952 /*------------------------------------------------------------------------* 953 * usbd_set_endpoint_stall 954 * 955 * This function is used to make a BULK or INTERRUPT endpoint send 956 * STALL tokens in USB device mode. 957 * 958 * Returns: 959 * 0: Success 960 * Else: Failure 961 *------------------------------------------------------------------------*/ 962 usb_error_t 963 usbd_set_endpoint_stall(struct usb_device *udev, struct usb_endpoint *ep, 964 uint8_t do_stall) 965 { 966 struct usb_xfer *xfer; 967 usb_stream_t x; 968 uint8_t et; 969 uint8_t was_stalled; 970 971 if (ep == NULL) { 972 /* nothing to do */ 973 DPRINTF("Cannot find endpoint\n"); 974 /* 975 * Pretend that the clear or set stall request is 976 * successful else some USB host stacks can do 977 * strange things, especially when a control endpoint 978 * stalls. 979 */ 980 return (0); 981 } 982 et = (ep->edesc->bmAttributes & UE_XFERTYPE); 983 984 if ((et != UE_BULK) && 985 (et != UE_INTERRUPT)) { 986 /* 987 * Should not stall control 988 * nor isochronous endpoints. 989 */ 990 DPRINTF("Invalid endpoint\n"); 991 return (0); 992 } 993 USB_BUS_LOCK(udev->bus); 994 995 /* store current stall state */ 996 was_stalled = ep->is_stalled; 997 998 /* check for no change */ 999 if (was_stalled && do_stall) { 1000 /* if the endpoint is already stalled do nothing */ 1001 USB_BUS_UNLOCK(udev->bus); 1002 DPRINTF("No change\n"); 1003 return (0); 1004 } 1005 /* set stalled state */ 1006 ep->is_stalled = 1; 1007 1008 if (do_stall || (!was_stalled)) { 1009 if (!was_stalled) { 1010 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1011 /* lookup the current USB transfer, if any */ 1012 xfer = ep->endpoint_q[x].curr; 1013 if (xfer != NULL) { 1014 /* 1015 * The "xfer_stall" method 1016 * will complete the USB 1017 * transfer like in case of a 1018 * timeout setting the error 1019 * code "USB_ERR_STALLED". 1020 */ 1021 (udev->bus->methods->xfer_stall) (xfer); 1022 } 1023 } 1024 } 1025 (udev->bus->methods->set_stall) (udev, ep, &do_stall); 1026 } 1027 if (!do_stall) { 1028 ep->toggle_next = 0; /* reset data toggle */ 1029 ep->is_stalled = 0; /* clear stalled state */ 1030 1031 (udev->bus->methods->clear_stall) (udev, ep); 1032 1033 /* start the current or next transfer, if any */ 1034 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1035 usb_command_wrapper(&ep->endpoint_q[x], 1036 ep->endpoint_q[x].curr); 1037 } 1038 } 1039 USB_BUS_UNLOCK(udev->bus); 1040 return (0); 1041 } 1042 1043 /*------------------------------------------------------------------------* 1044 * usb_reset_iface_endpoints - used in USB device side mode 1045 *------------------------------------------------------------------------*/ 1046 usb_error_t 1047 usb_reset_iface_endpoints(struct usb_device *udev, uint8_t iface_index) 1048 { 1049 struct usb_endpoint *ep; 1050 struct usb_endpoint *ep_end; 1051 1052 ep = udev->endpoints; 1053 ep_end = udev->endpoints + udev->endpoints_max; 1054 1055 for (; ep != ep_end; ep++) { 1056 1057 if ((ep->edesc == NULL) || 1058 (ep->iface_index != iface_index)) { 1059 continue; 1060 } 1061 /* simulate a clear stall from the peer */ 1062 usbd_set_endpoint_stall(udev, ep, 0); 1063 } 1064 return (0); 1065 } 1066 1067 /*------------------------------------------------------------------------* 1068 * usb_detach_device_sub 1069 * 1070 * This function will try to detach an USB device. If it fails a panic 1071 * will result. 1072 * 1073 * Flag values, see "USB_UNCFG_FLAG_XXX". 1074 *------------------------------------------------------------------------*/ 1075 static void 1076 usb_detach_device_sub(struct usb_device *udev, device_t *ppdev, 1077 char **ppnpinfo, uint8_t flag) 1078 { 1079 device_t dev; 1080 char *pnpinfo; 1081 int err; 1082 1083 dev = *ppdev; 1084 if (dev) { 1085 /* 1086 * NOTE: It is important to clear "*ppdev" before deleting 1087 * the child due to some device methods being called late 1088 * during the delete process ! 1089 */ 1090 *ppdev = NULL; 1091 1092 if (!rebooting) { 1093 device_printf(dev, "at %s, port %d, addr %d " 1094 "(disconnected)\n", 1095 device_get_nameunit(udev->parent_dev), 1096 udev->port_no, udev->address); 1097 } 1098 1099 if (device_is_attached(dev)) { 1100 if (udev->flags.peer_suspended) { 1101 err = DEVICE_RESUME(dev); 1102 if (err) { 1103 device_printf(dev, "Resume failed\n"); 1104 } 1105 } 1106 if (device_detach(dev)) { 1107 goto error; 1108 } 1109 } 1110 if (device_delete_child(udev->parent_dev, dev)) { 1111 goto error; 1112 } 1113 } 1114 1115 pnpinfo = *ppnpinfo; 1116 if (pnpinfo != NULL) { 1117 *ppnpinfo = NULL; 1118 free(pnpinfo, M_USBDEV); 1119 } 1120 return; 1121 1122 error: 1123 /* Detach is not allowed to fail in the USB world */ 1124 panic("usb_detach_device_sub: A USB driver would not detach\n"); 1125 } 1126 1127 /*------------------------------------------------------------------------* 1128 * usb_detach_device 1129 * 1130 * The following function will detach the matching interfaces. 1131 * This function is NULL safe. 1132 * 1133 * Flag values, see "USB_UNCFG_FLAG_XXX". 1134 *------------------------------------------------------------------------*/ 1135 void 1136 usb_detach_device(struct usb_device *udev, uint8_t iface_index, 1137 uint8_t flag) 1138 { 1139 struct usb_interface *iface; 1140 uint8_t i; 1141 1142 if (udev == NULL) { 1143 /* nothing to do */ 1144 return; 1145 } 1146 DPRINTFN(4, "udev=%p\n", udev); 1147 1148 sx_assert(&udev->enum_sx, SA_LOCKED); 1149 1150 /* 1151 * First detach the child to give the child's detach routine a 1152 * chance to detach the sub-devices in the correct order. 1153 * Then delete the child using "device_delete_child()" which 1154 * will detach all sub-devices from the bottom and upwards! 1155 */ 1156 if (iface_index != USB_IFACE_INDEX_ANY) { 1157 i = iface_index; 1158 iface_index = i + 1; 1159 } else { 1160 i = 0; 1161 iface_index = USB_IFACE_MAX; 1162 } 1163 1164 /* do the detach */ 1165 1166 for (; i != iface_index; i++) { 1167 1168 iface = usbd_get_iface(udev, i); 1169 if (iface == NULL) { 1170 /* looks like the end of the USB interfaces */ 1171 break; 1172 } 1173 usb_detach_device_sub(udev, &iface->subdev, 1174 &iface->pnpinfo, flag); 1175 } 1176 } 1177 1178 /*------------------------------------------------------------------------* 1179 * usb_probe_and_attach_sub 1180 * 1181 * Returns: 1182 * 0: Success 1183 * Else: Failure 1184 *------------------------------------------------------------------------*/ 1185 static uint8_t 1186 usb_probe_and_attach_sub(struct usb_device *udev, 1187 struct usb_attach_arg *uaa) 1188 { 1189 struct usb_interface *iface; 1190 device_t dev; 1191 int err; 1192 1193 iface = uaa->iface; 1194 if (iface->parent_iface_index != USB_IFACE_INDEX_ANY) { 1195 /* leave interface alone */ 1196 return (0); 1197 } 1198 dev = iface->subdev; 1199 if (dev) { 1200 1201 /* clean up after module unload */ 1202 1203 if (device_is_attached(dev)) { 1204 /* already a device there */ 1205 return (0); 1206 } 1207 /* clear "iface->subdev" as early as possible */ 1208 1209 iface->subdev = NULL; 1210 1211 if (device_delete_child(udev->parent_dev, dev)) { 1212 1213 /* 1214 * Panic here, else one can get a double call 1215 * to device_detach(). USB devices should 1216 * never fail on detach! 1217 */ 1218 panic("device_delete_child() failed\n"); 1219 } 1220 } 1221 if (uaa->temp_dev == NULL) { 1222 1223 /* create a new child */ 1224 uaa->temp_dev = device_add_child(udev->parent_dev, NULL, -1); 1225 if (uaa->temp_dev == NULL) { 1226 device_printf(udev->parent_dev, 1227 "Device creation failed\n"); 1228 return (1); /* failure */ 1229 } 1230 device_set_ivars(uaa->temp_dev, uaa); 1231 device_quiet(uaa->temp_dev); 1232 } 1233 /* 1234 * Set "subdev" before probe and attach so that "devd" gets 1235 * the information it needs. 1236 */ 1237 iface->subdev = uaa->temp_dev; 1238 1239 if (device_probe_and_attach(iface->subdev) == 0) { 1240 /* 1241 * The USB attach arguments are only available during probe 1242 * and attach ! 1243 */ 1244 uaa->temp_dev = NULL; 1245 device_set_ivars(iface->subdev, NULL); 1246 1247 if (udev->flags.peer_suspended) { 1248 err = DEVICE_SUSPEND(iface->subdev); 1249 if (err) 1250 device_printf(iface->subdev, "Suspend failed\n"); 1251 } 1252 return (0); /* success */ 1253 } else { 1254 /* No USB driver found */ 1255 iface->subdev = NULL; 1256 } 1257 return (1); /* failure */ 1258 } 1259 1260 /*------------------------------------------------------------------------* 1261 * usbd_set_parent_iface 1262 * 1263 * Using this function will lock the alternate interface setting on an 1264 * interface. It is typically used for multi interface drivers. In USB 1265 * device side mode it is assumed that the alternate interfaces all 1266 * have the same endpoint descriptors. The default parent index value 1267 * is "USB_IFACE_INDEX_ANY". Then the alternate setting value is not 1268 * locked. 1269 *------------------------------------------------------------------------*/ 1270 void 1271 usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 1272 uint8_t parent_index) 1273 { 1274 struct usb_interface *iface; 1275 1276 if (udev == NULL) { 1277 /* nothing to do */ 1278 return; 1279 } 1280 iface = usbd_get_iface(udev, iface_index); 1281 if (iface != NULL) 1282 iface->parent_iface_index = parent_index; 1283 } 1284 1285 static void 1286 usb_init_attach_arg(struct usb_device *udev, 1287 struct usb_attach_arg *uaa) 1288 { 1289 memset(uaa, 0, sizeof(*uaa)); 1290 1291 uaa->device = udev; 1292 uaa->usb_mode = udev->flags.usb_mode; 1293 uaa->port = udev->port_no; 1294 uaa->dev_state = UAA_DEV_READY; 1295 1296 uaa->info.idVendor = UGETW(udev->ddesc.idVendor); 1297 uaa->info.idProduct = UGETW(udev->ddesc.idProduct); 1298 uaa->info.bcdDevice = UGETW(udev->ddesc.bcdDevice); 1299 uaa->info.bDeviceClass = udev->ddesc.bDeviceClass; 1300 uaa->info.bDeviceSubClass = udev->ddesc.bDeviceSubClass; 1301 uaa->info.bDeviceProtocol = udev->ddesc.bDeviceProtocol; 1302 uaa->info.bConfigIndex = udev->curr_config_index; 1303 uaa->info.bConfigNum = udev->curr_config_no; 1304 } 1305 1306 /*------------------------------------------------------------------------* 1307 * usb_probe_and_attach 1308 * 1309 * This function is called from "uhub_explore_sub()", 1310 * "usb_handle_set_config()" and "usb_handle_request()". 1311 * 1312 * Returns: 1313 * 0: Success 1314 * Else: A control transfer failed 1315 *------------------------------------------------------------------------*/ 1316 usb_error_t 1317 usb_probe_and_attach(struct usb_device *udev, uint8_t iface_index) 1318 { 1319 struct usb_attach_arg uaa; 1320 struct usb_interface *iface; 1321 uint8_t i; 1322 uint8_t j; 1323 uint8_t do_unlock; 1324 1325 if (udev == NULL) { 1326 DPRINTF("udev == NULL\n"); 1327 return (USB_ERR_INVAL); 1328 } 1329 /* Prevent re-enumeration */ 1330 do_unlock = usbd_enum_lock(udev); 1331 1332 if (udev->curr_config_index == USB_UNCONFIG_INDEX) { 1333 /* do nothing - no configuration has been set */ 1334 goto done; 1335 } 1336 /* setup USB attach arguments */ 1337 1338 usb_init_attach_arg(udev, &uaa); 1339 1340 /* 1341 * If the whole USB device is targeted, invoke the USB event 1342 * handler(s): 1343 */ 1344 if (iface_index == USB_IFACE_INDEX_ANY) { 1345 1346 if (usb_test_quirk(&uaa, UQ_MSC_DYMO_EJECT) != 0 && 1347 usb_dymo_eject(udev, 0) == 0) { 1348 /* success, mark the udev as disappearing */ 1349 uaa.dev_state = UAA_DEV_EJECTING; 1350 } 1351 1352 EVENTHANDLER_INVOKE(usb_dev_configured, udev, &uaa); 1353 1354 if (uaa.dev_state != UAA_DEV_READY) { 1355 /* leave device unconfigured */ 1356 usb_unconfigure(udev, 0); 1357 goto done; 1358 } 1359 } 1360 1361 /* Check if only one interface should be probed: */ 1362 if (iface_index != USB_IFACE_INDEX_ANY) { 1363 i = iface_index; 1364 j = i + 1; 1365 } else { 1366 i = 0; 1367 j = USB_IFACE_MAX; 1368 } 1369 1370 /* Do the probe and attach */ 1371 for (; i != j; i++) { 1372 1373 iface = usbd_get_iface(udev, i); 1374 if (iface == NULL) { 1375 /* 1376 * Looks like the end of the USB 1377 * interfaces ! 1378 */ 1379 DPRINTFN(2, "end of interfaces " 1380 "at %u\n", i); 1381 break; 1382 } 1383 if (iface->idesc == NULL) { 1384 /* no interface descriptor */ 1385 continue; 1386 } 1387 uaa.iface = iface; 1388 1389 uaa.info.bInterfaceClass = 1390 iface->idesc->bInterfaceClass; 1391 uaa.info.bInterfaceSubClass = 1392 iface->idesc->bInterfaceSubClass; 1393 uaa.info.bInterfaceProtocol = 1394 iface->idesc->bInterfaceProtocol; 1395 uaa.info.bIfaceIndex = i; 1396 uaa.info.bIfaceNum = 1397 iface->idesc->bInterfaceNumber; 1398 uaa.driver_info = 0; /* reset driver_info */ 1399 1400 DPRINTFN(2, "iclass=%u/%u/%u iindex=%u/%u\n", 1401 uaa.info.bInterfaceClass, 1402 uaa.info.bInterfaceSubClass, 1403 uaa.info.bInterfaceProtocol, 1404 uaa.info.bIfaceIndex, 1405 uaa.info.bIfaceNum); 1406 1407 usb_probe_and_attach_sub(udev, &uaa); 1408 1409 /* 1410 * Remove the leftover child, if any, to enforce that 1411 * a new nomatch devd event is generated for the next 1412 * interface if no driver is found: 1413 */ 1414 if (uaa.temp_dev == NULL) 1415 continue; 1416 if (device_delete_child(udev->parent_dev, uaa.temp_dev)) 1417 DPRINTFN(0, "device delete child failed\n"); 1418 uaa.temp_dev = NULL; 1419 } 1420 done: 1421 if (do_unlock) 1422 usbd_enum_unlock(udev); 1423 return (0); 1424 } 1425 1426 /*------------------------------------------------------------------------* 1427 * usb_suspend_resume_sub 1428 * 1429 * This function is called when the suspend or resume methods should 1430 * be executed on an USB device. 1431 *------------------------------------------------------------------------*/ 1432 static void 1433 usb_suspend_resume_sub(struct usb_device *udev, device_t dev, uint8_t do_suspend) 1434 { 1435 int err; 1436 1437 if (dev == NULL) { 1438 return; 1439 } 1440 if (!device_is_attached(dev)) { 1441 return; 1442 } 1443 if (do_suspend) { 1444 err = DEVICE_SUSPEND(dev); 1445 } else { 1446 err = DEVICE_RESUME(dev); 1447 } 1448 if (err) { 1449 device_printf(dev, "%s failed\n", 1450 do_suspend ? "Suspend" : "Resume"); 1451 } 1452 } 1453 1454 /*------------------------------------------------------------------------* 1455 * usb_suspend_resume 1456 * 1457 * The following function will suspend or resume the USB device. 1458 * 1459 * Returns: 1460 * 0: Success 1461 * Else: Failure 1462 *------------------------------------------------------------------------*/ 1463 usb_error_t 1464 usb_suspend_resume(struct usb_device *udev, uint8_t do_suspend) 1465 { 1466 struct usb_interface *iface; 1467 uint8_t i; 1468 1469 if (udev == NULL) { 1470 /* nothing to do */ 1471 return (0); 1472 } 1473 DPRINTFN(4, "udev=%p do_suspend=%d\n", udev, do_suspend); 1474 1475 sx_assert(&udev->sr_sx, SA_LOCKED); 1476 1477 USB_BUS_LOCK(udev->bus); 1478 /* filter the suspend events */ 1479 if (udev->flags.peer_suspended == do_suspend) { 1480 USB_BUS_UNLOCK(udev->bus); 1481 /* nothing to do */ 1482 return (0); 1483 } 1484 udev->flags.peer_suspended = do_suspend; 1485 USB_BUS_UNLOCK(udev->bus); 1486 1487 /* do the suspend or resume */ 1488 1489 for (i = 0; i != USB_IFACE_MAX; i++) { 1490 1491 iface = usbd_get_iface(udev, i); 1492 if (iface == NULL) { 1493 /* looks like the end of the USB interfaces */ 1494 break; 1495 } 1496 usb_suspend_resume_sub(udev, iface->subdev, do_suspend); 1497 } 1498 return (0); 1499 } 1500 1501 /*------------------------------------------------------------------------* 1502 * usbd_clear_stall_proc 1503 * 1504 * This function performs generic USB clear stall operations. 1505 *------------------------------------------------------------------------*/ 1506 static void 1507 usbd_clear_stall_proc(struct usb_proc_msg *_pm) 1508 { 1509 struct usb_udev_msg *pm = (void *)_pm; 1510 struct usb_device *udev = pm->udev; 1511 1512 /* Change lock */ 1513 USB_BUS_UNLOCK(udev->bus); 1514 mtx_lock(&udev->device_mtx); 1515 1516 /* Start clear stall callback */ 1517 usbd_transfer_start(udev->ctrl_xfer[1]); 1518 1519 /* Change lock */ 1520 mtx_unlock(&udev->device_mtx); 1521 USB_BUS_LOCK(udev->bus); 1522 } 1523 1524 /*------------------------------------------------------------------------* 1525 * usb_alloc_device 1526 * 1527 * This function allocates a new USB device. This function is called 1528 * when a new device has been put in the powered state, but not yet in 1529 * the addressed state. Get initial descriptor, set the address, get 1530 * full descriptor and get strings. 1531 * 1532 * Return values: 1533 * 0: Failure 1534 * Else: Success 1535 *------------------------------------------------------------------------*/ 1536 struct usb_device * 1537 usb_alloc_device(device_t parent_dev, struct usb_bus *bus, 1538 struct usb_device *parent_hub, uint8_t depth, uint8_t port_index, 1539 uint8_t port_no, enum usb_dev_speed speed, enum usb_hc_mode mode) 1540 { 1541 struct usb_attach_arg uaa; 1542 struct usb_device *udev; 1543 struct usb_device *adev; 1544 struct usb_device *hub; 1545 uint8_t *scratch_ptr; 1546 usb_error_t err; 1547 uint8_t device_index; 1548 uint8_t config_index; 1549 uint8_t config_quirk; 1550 uint8_t set_config_failed; 1551 uint8_t do_unlock; 1552 1553 DPRINTF("parent_dev=%p, bus=%p, parent_hub=%p, depth=%u, " 1554 "port_index=%u, port_no=%u, speed=%u, usb_mode=%u\n", 1555 parent_dev, bus, parent_hub, depth, port_index, port_no, 1556 speed, mode); 1557 1558 /* 1559 * Find an unused device index. In USB Host mode this is the 1560 * same as the device address. 1561 * 1562 * Device index zero is not used and device index 1 should 1563 * always be the root hub. 1564 */ 1565 for (device_index = USB_ROOT_HUB_ADDR; 1566 (device_index != bus->devices_max) && 1567 (bus->devices[device_index] != NULL); 1568 device_index++) /* nop */; 1569 1570 if (device_index == bus->devices_max) { 1571 device_printf(bus->bdev, 1572 "No free USB device index for new device\n"); 1573 return (NULL); 1574 } 1575 1576 if (depth > 0x10) { 1577 device_printf(bus->bdev, 1578 "Invalid device depth\n"); 1579 return (NULL); 1580 } 1581 udev = malloc(sizeof(*udev), M_USB, M_WAITOK | M_ZERO); 1582 if (udev == NULL) { 1583 return (NULL); 1584 } 1585 /* initialise our SX-lock */ 1586 sx_init_flags(&udev->enum_sx, "USB config SX lock", SX_DUPOK); 1587 sx_init_flags(&udev->sr_sx, "USB suspend and resume SX lock", SX_NOWITNESS); 1588 1589 cv_init(&udev->ctrlreq_cv, "WCTRL"); 1590 cv_init(&udev->ref_cv, "UGONE"); 1591 1592 /* initialise our mutex */ 1593 mtx_init(&udev->device_mtx, "USB device mutex", NULL, MTX_DEF); 1594 1595 /* initialise generic clear stall */ 1596 udev->cs_msg[0].hdr.pm_callback = &usbd_clear_stall_proc; 1597 udev->cs_msg[0].udev = udev; 1598 udev->cs_msg[1].hdr.pm_callback = &usbd_clear_stall_proc; 1599 udev->cs_msg[1].udev = udev; 1600 1601 /* initialise some USB device fields */ 1602 udev->parent_hub = parent_hub; 1603 udev->parent_dev = parent_dev; 1604 udev->port_index = port_index; 1605 udev->port_no = port_no; 1606 udev->depth = depth; 1607 udev->bus = bus; 1608 udev->address = USB_START_ADDR; /* default value */ 1609 udev->plugtime = (usb_ticks_t)ticks; 1610 /* 1611 * We need to force the power mode to "on" because there are plenty 1612 * of USB devices out there that do not work very well with 1613 * automatic suspend and resume! 1614 */ 1615 udev->power_mode = usbd_filter_power_mode(udev, USB_POWER_MODE_ON); 1616 udev->pwr_save.last_xfer_time = ticks; 1617 /* we are not ready yet */ 1618 udev->refcount = 1; 1619 1620 /* set up default endpoint descriptor */ 1621 udev->ctrl_ep_desc.bLength = sizeof(udev->ctrl_ep_desc); 1622 udev->ctrl_ep_desc.bDescriptorType = UDESC_ENDPOINT; 1623 udev->ctrl_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 1624 udev->ctrl_ep_desc.bmAttributes = UE_CONTROL; 1625 udev->ctrl_ep_desc.wMaxPacketSize[0] = USB_MAX_IPACKET; 1626 udev->ctrl_ep_desc.wMaxPacketSize[1] = 0; 1627 udev->ctrl_ep_desc.bInterval = 0; 1628 1629 /* set up default endpoint companion descriptor */ 1630 udev->ctrl_ep_comp_desc.bLength = sizeof(udev->ctrl_ep_comp_desc); 1631 udev->ctrl_ep_comp_desc.bDescriptorType = UDESC_ENDPOINT_SS_COMP; 1632 1633 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 1634 1635 udev->speed = speed; 1636 udev->flags.usb_mode = mode; 1637 1638 /* search for our High Speed USB HUB, if any */ 1639 1640 adev = udev; 1641 hub = udev->parent_hub; 1642 1643 while (hub) { 1644 if (hub->speed == USB_SPEED_HIGH) { 1645 udev->hs_hub_addr = hub->address; 1646 udev->parent_hs_hub = hub; 1647 udev->hs_port_no = adev->port_no; 1648 break; 1649 } 1650 adev = hub; 1651 hub = hub->parent_hub; 1652 } 1653 1654 /* init the default endpoint */ 1655 usb_init_endpoint(udev, 0, 1656 &udev->ctrl_ep_desc, 1657 &udev->ctrl_ep_comp_desc, 1658 &udev->ctrl_ep); 1659 1660 /* set device index */ 1661 udev->device_index = device_index; 1662 1663 #if USB_HAVE_UGEN 1664 /* Create ugen name */ 1665 snprintf(udev->ugen_name, sizeof(udev->ugen_name), 1666 USB_GENERIC_NAME "%u.%u", device_get_unit(bus->bdev), 1667 device_index); 1668 LIST_INIT(&udev->pd_list); 1669 1670 /* Create the control endpoint device */ 1671 udev->ctrl_dev = usb_make_dev(udev, NULL, 0, 0, 1672 FREAD|FWRITE, UID_ROOT, GID_OPERATOR, 0600); 1673 1674 /* Create a link from /dev/ugenX.X to the default endpoint */ 1675 if (udev->ctrl_dev != NULL) 1676 make_dev_alias(udev->ctrl_dev->cdev, "%s", udev->ugen_name); 1677 #endif 1678 /* Initialise device */ 1679 if (bus->methods->device_init != NULL) { 1680 err = (bus->methods->device_init) (udev); 1681 if (err != 0) { 1682 DPRINTFN(0, "device init %d failed " 1683 "(%s, ignored)\n", device_index, 1684 usbd_errstr(err)); 1685 goto done; 1686 } 1687 } 1688 /* set powered device state after device init is complete */ 1689 usb_set_device_state(udev, USB_STATE_POWERED); 1690 1691 if (udev->flags.usb_mode == USB_MODE_HOST) { 1692 1693 err = usbd_req_set_address(udev, NULL, device_index); 1694 1695 /* 1696 * This is the new USB device address from now on, if 1697 * the set address request didn't set it already. 1698 */ 1699 if (udev->address == USB_START_ADDR) 1700 udev->address = device_index; 1701 1702 /* 1703 * We ignore any set-address errors, hence there are 1704 * buggy USB devices out there that actually receive 1705 * the SETUP PID, but manage to set the address before 1706 * the STATUS stage is ACK'ed. If the device responds 1707 * to the subsequent get-descriptor at the new 1708 * address, then we know that the set-address command 1709 * was successful. 1710 */ 1711 if (err) { 1712 DPRINTFN(0, "set address %d failed " 1713 "(%s, ignored)\n", udev->address, 1714 usbd_errstr(err)); 1715 } 1716 } else { 1717 /* We are not self powered */ 1718 udev->flags.self_powered = 0; 1719 1720 /* Set unconfigured state */ 1721 udev->curr_config_no = USB_UNCONFIG_NO; 1722 udev->curr_config_index = USB_UNCONFIG_INDEX; 1723 1724 /* Setup USB descriptors */ 1725 err = (usb_temp_setup_by_index_p) (udev, usb_template); 1726 if (err) { 1727 DPRINTFN(0, "setting up USB template failed maybe the USB " 1728 "template module has not been loaded\n"); 1729 goto done; 1730 } 1731 } 1732 usb_set_device_state(udev, USB_STATE_ADDRESSED); 1733 1734 /* setup the device descriptor and the initial "wMaxPacketSize" */ 1735 err = usbd_setup_device_desc(udev, NULL); 1736 1737 if (err != 0) { 1738 /* try to enumerate two more times */ 1739 err = usbd_req_re_enumerate(udev, NULL); 1740 if (err != 0) { 1741 err = usbd_req_re_enumerate(udev, NULL); 1742 if (err != 0) { 1743 goto done; 1744 } 1745 } 1746 } 1747 1748 /* 1749 * Setup temporary USB attach args so that we can figure out some 1750 * basic quirks for this device. 1751 */ 1752 usb_init_attach_arg(udev, &uaa); 1753 1754 if (usb_test_quirk(&uaa, UQ_BUS_POWERED)) { 1755 udev->flags.uq_bus_powered = 1; 1756 } 1757 if (usb_test_quirk(&uaa, UQ_NO_STRINGS)) { 1758 udev->flags.no_strings = 1; 1759 } 1760 /* 1761 * Workaround for buggy USB devices. 1762 * 1763 * It appears that some string-less USB chips will crash and 1764 * disappear if any attempts are made to read any string 1765 * descriptors. 1766 * 1767 * Try to detect such chips by checking the strings in the USB 1768 * device descriptor. If no strings are present there we 1769 * simply disable all USB strings. 1770 */ 1771 1772 /* Protect scratch area */ 1773 do_unlock = usbd_enum_lock(udev); 1774 1775 scratch_ptr = udev->scratch.data; 1776 1777 if (udev->ddesc.iManufacturer || 1778 udev->ddesc.iProduct || 1779 udev->ddesc.iSerialNumber) { 1780 /* read out the language ID string */ 1781 err = usbd_req_get_string_desc(udev, NULL, 1782 (char *)scratch_ptr, 4, 0, USB_LANGUAGE_TABLE); 1783 } else { 1784 err = USB_ERR_INVAL; 1785 } 1786 1787 if (err || (scratch_ptr[0] < 4)) { 1788 udev->flags.no_strings = 1; 1789 } else { 1790 uint16_t langid; 1791 uint16_t pref; 1792 uint16_t mask; 1793 uint8_t x; 1794 1795 /* load preferred value and mask */ 1796 pref = usb_lang_id; 1797 mask = usb_lang_mask; 1798 1799 /* align length correctly */ 1800 scratch_ptr[0] &= ~1U; 1801 1802 /* fix compiler warning */ 1803 langid = 0; 1804 1805 /* search for preferred language */ 1806 for (x = 2; (x < scratch_ptr[0]); x += 2) { 1807 langid = UGETW(scratch_ptr + x); 1808 if ((langid & mask) == pref) 1809 break; 1810 } 1811 if (x >= scratch_ptr[0]) { 1812 /* pick the first language as the default */ 1813 DPRINTFN(1, "Using first language\n"); 1814 langid = UGETW(scratch_ptr + 2); 1815 } 1816 1817 DPRINTFN(1, "Language selected: 0x%04x\n", langid); 1818 udev->langid = langid; 1819 } 1820 1821 if (do_unlock) 1822 usbd_enum_unlock(udev); 1823 1824 /* assume 100mA bus powered for now. Changed when configured. */ 1825 udev->power = USB_MIN_POWER; 1826 /* fetch the vendor and product strings from the device */ 1827 usbd_set_device_strings(udev); 1828 1829 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 1830 /* USB device mode setup is complete */ 1831 err = 0; 1832 goto config_done; 1833 } 1834 1835 /* 1836 * Most USB devices should attach to config index 0 by 1837 * default 1838 */ 1839 if (usb_test_quirk(&uaa, UQ_CFG_INDEX_0)) { 1840 config_index = 0; 1841 config_quirk = 1; 1842 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_1)) { 1843 config_index = 1; 1844 config_quirk = 1; 1845 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_2)) { 1846 config_index = 2; 1847 config_quirk = 1; 1848 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_3)) { 1849 config_index = 3; 1850 config_quirk = 1; 1851 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_4)) { 1852 config_index = 4; 1853 config_quirk = 1; 1854 } else { 1855 config_index = 0; 1856 config_quirk = 0; 1857 } 1858 1859 set_config_failed = 0; 1860 repeat_set_config: 1861 1862 DPRINTF("setting config %u\n", config_index); 1863 1864 /* get the USB device configured */ 1865 err = usbd_set_config_index(udev, config_index); 1866 if (err) { 1867 if (udev->ddesc.bNumConfigurations != 0) { 1868 if (!set_config_failed) { 1869 set_config_failed = 1; 1870 /* XXX try to re-enumerate the device */ 1871 err = usbd_req_re_enumerate(udev, NULL); 1872 if (err == 0) 1873 goto repeat_set_config; 1874 } 1875 DPRINTFN(0, "Failure selecting configuration index %u:" 1876 "%s, port %u, addr %u (ignored)\n", 1877 config_index, usbd_errstr(err), udev->port_no, 1878 udev->address); 1879 } 1880 /* 1881 * Some USB devices do not have any configurations. Ignore any 1882 * set config failures! 1883 */ 1884 err = 0; 1885 goto config_done; 1886 } 1887 if (!config_quirk && config_index + 1 < udev->ddesc.bNumConfigurations) { 1888 if ((udev->cdesc->bNumInterface < 2) && 1889 usbd_get_no_descriptors(udev->cdesc, UDESC_ENDPOINT) == 0) { 1890 DPRINTFN(0, "Found no endpoints, trying next config\n"); 1891 config_index++; 1892 goto repeat_set_config; 1893 } 1894 #if USB_HAVE_MSCTEST 1895 if (config_index == 0) { 1896 /* 1897 * Try to figure out if we have an 1898 * auto-install disk there: 1899 */ 1900 if (usb_iface_is_cdrom(udev, 0)) { 1901 DPRINTFN(0, "Found possible auto-install " 1902 "disk (trying next config)\n"); 1903 config_index++; 1904 goto repeat_set_config; 1905 } 1906 } 1907 #endif 1908 } 1909 #if USB_HAVE_MSCTEST 1910 if (set_config_failed == 0 && config_index == 0 && 1911 usb_test_quirk(&uaa, UQ_MSC_NO_SYNC_CACHE) == 0 && 1912 usb_test_quirk(&uaa, UQ_MSC_NO_GETMAXLUN) == 0) { 1913 1914 /* 1915 * Try to figure out if there are any MSC quirks we 1916 * should apply automatically: 1917 */ 1918 err = usb_msc_auto_quirk(udev, 0); 1919 1920 if (err != 0) { 1921 set_config_failed = 1; 1922 goto repeat_set_config; 1923 } 1924 } 1925 #endif 1926 1927 config_done: 1928 DPRINTF("new dev (addr %d), udev=%p, parent_hub=%p\n", 1929 udev->address, udev, udev->parent_hub); 1930 1931 /* register our device - we are ready */ 1932 usb_bus_port_set_device(bus, parent_hub ? 1933 parent_hub->hub->ports + port_index : NULL, udev, device_index); 1934 1935 #if USB_HAVE_UGEN 1936 /* Symlink the ugen device name */ 1937 udev->ugen_symlink = usb_alloc_symlink(udev->ugen_name); 1938 1939 /* Announce device */ 1940 printf("%s: <%s> at %s\n", udev->ugen_name, 1941 usb_get_manufacturer(udev), 1942 device_get_nameunit(udev->bus->bdev)); 1943 #endif 1944 1945 #if USB_HAVE_DEVCTL 1946 usb_notify_addq("ATTACH", udev); 1947 #endif 1948 done: 1949 if (err) { 1950 /* 1951 * Free USB device and all subdevices, if any. 1952 */ 1953 usb_free_device(udev, 0); 1954 udev = NULL; 1955 } 1956 return (udev); 1957 } 1958 1959 #if USB_HAVE_UGEN 1960 struct usb_fs_privdata * 1961 usb_make_dev(struct usb_device *udev, const char *devname, int ep, 1962 int fi, int rwmode, uid_t uid, gid_t gid, int mode) 1963 { 1964 struct usb_fs_privdata* pd; 1965 char buffer[32]; 1966 1967 /* Store information to locate ourselves again later */ 1968 pd = malloc(sizeof(struct usb_fs_privdata), M_USBDEV, 1969 M_WAITOK | M_ZERO); 1970 pd->bus_index = device_get_unit(udev->bus->bdev); 1971 pd->dev_index = udev->device_index; 1972 pd->ep_addr = ep; 1973 pd->fifo_index = fi; 1974 pd->mode = rwmode; 1975 1976 /* Now, create the device itself */ 1977 if (devname == NULL) { 1978 devname = buffer; 1979 snprintf(buffer, sizeof(buffer), USB_DEVICE_DIR "/%u.%u.%u", 1980 pd->bus_index, pd->dev_index, pd->ep_addr); 1981 } 1982 1983 pd->cdev = make_dev(&usb_devsw, 0, uid, gid, mode, "%s", devname); 1984 1985 if (pd->cdev == NULL) { 1986 DPRINTFN(0, "Failed to create device %s\n", devname); 1987 free(pd, M_USBDEV); 1988 return (NULL); 1989 } 1990 1991 /* XXX setting si_drv1 and creating the device is not atomic! */ 1992 pd->cdev->si_drv1 = pd; 1993 1994 return (pd); 1995 } 1996 1997 void 1998 usb_destroy_dev_sync(struct usb_fs_privdata *pd) 1999 { 2000 DPRINTFN(1, "Destroying device at ugen%d.%d\n", 2001 pd->bus_index, pd->dev_index); 2002 2003 /* 2004 * Destroy character device synchronously. After this 2005 * all system calls are returned. Can block. 2006 */ 2007 destroy_dev(pd->cdev); 2008 2009 free(pd, M_USBDEV); 2010 } 2011 2012 void 2013 usb_destroy_dev(struct usb_fs_privdata *pd) 2014 { 2015 struct usb_bus *bus; 2016 2017 if (pd == NULL) 2018 return; 2019 2020 mtx_lock(&usb_ref_lock); 2021 bus = devclass_get_softc(usb_devclass_ptr, pd->bus_index); 2022 mtx_unlock(&usb_ref_lock); 2023 2024 if (bus == NULL) { 2025 usb_destroy_dev_sync(pd); 2026 return; 2027 } 2028 2029 /* make sure we can re-use the device name */ 2030 delist_dev(pd->cdev); 2031 2032 USB_BUS_LOCK(bus); 2033 LIST_INSERT_HEAD(&bus->pd_cleanup_list, pd, pd_next); 2034 /* get cleanup going */ 2035 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 2036 &bus->cleanup_msg[0], &bus->cleanup_msg[1]); 2037 USB_BUS_UNLOCK(bus); 2038 } 2039 2040 static void 2041 usb_cdev_create(struct usb_device *udev) 2042 { 2043 struct usb_config_descriptor *cd; 2044 struct usb_endpoint_descriptor *ed; 2045 struct usb_descriptor *desc; 2046 struct usb_fs_privdata* pd; 2047 int inmode, outmode, inmask, outmask, mode; 2048 uint8_t ep; 2049 2050 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("stale cdev entries")); 2051 2052 DPRINTFN(2, "Creating device nodes\n"); 2053 2054 if (usbd_get_mode(udev) == USB_MODE_DEVICE) { 2055 inmode = FWRITE; 2056 outmode = FREAD; 2057 } else { /* USB_MODE_HOST */ 2058 inmode = FREAD; 2059 outmode = FWRITE; 2060 } 2061 2062 inmask = 0; 2063 outmask = 0; 2064 desc = NULL; 2065 2066 /* 2067 * Collect all used endpoint numbers instead of just 2068 * generating 16 static endpoints. 2069 */ 2070 cd = usbd_get_config_descriptor(udev); 2071 while ((desc = usb_desc_foreach(cd, desc))) { 2072 /* filter out all endpoint descriptors */ 2073 if ((desc->bDescriptorType == UDESC_ENDPOINT) && 2074 (desc->bLength >= sizeof(*ed))) { 2075 ed = (struct usb_endpoint_descriptor *)desc; 2076 2077 /* update masks */ 2078 ep = ed->bEndpointAddress; 2079 if (UE_GET_DIR(ep) == UE_DIR_OUT) 2080 outmask |= 1 << UE_GET_ADDR(ep); 2081 else 2082 inmask |= 1 << UE_GET_ADDR(ep); 2083 } 2084 } 2085 2086 /* Create all available endpoints except EP0 */ 2087 for (ep = 1; ep < 16; ep++) { 2088 mode = (inmask & (1 << ep)) ? inmode : 0; 2089 mode |= (outmask & (1 << ep)) ? outmode : 0; 2090 if (mode == 0) 2091 continue; /* no IN or OUT endpoint */ 2092 2093 pd = usb_make_dev(udev, NULL, ep, 0, 2094 mode, UID_ROOT, GID_OPERATOR, 0600); 2095 2096 if (pd != NULL) 2097 LIST_INSERT_HEAD(&udev->pd_list, pd, pd_next); 2098 } 2099 } 2100 2101 static void 2102 usb_cdev_free(struct usb_device *udev) 2103 { 2104 struct usb_fs_privdata* pd; 2105 2106 DPRINTFN(2, "Freeing device nodes\n"); 2107 2108 while ((pd = LIST_FIRST(&udev->pd_list)) != NULL) { 2109 KASSERT(pd->cdev->si_drv1 == pd, ("privdata corrupt")); 2110 2111 LIST_REMOVE(pd, pd_next); 2112 2113 usb_destroy_dev(pd); 2114 } 2115 } 2116 #endif 2117 2118 /*------------------------------------------------------------------------* 2119 * usb_free_device 2120 * 2121 * This function is NULL safe and will free an USB device and its 2122 * children devices, if any. 2123 * 2124 * Flag values: Reserved, set to zero. 2125 *------------------------------------------------------------------------*/ 2126 void 2127 usb_free_device(struct usb_device *udev, uint8_t flag) 2128 { 2129 struct usb_bus *bus; 2130 2131 if (udev == NULL) 2132 return; /* already freed */ 2133 2134 DPRINTFN(4, "udev=%p port=%d\n", udev, udev->port_no); 2135 2136 bus = udev->bus; 2137 2138 /* set DETACHED state to prevent any further references */ 2139 usb_set_device_state(udev, USB_STATE_DETACHED); 2140 2141 #if USB_HAVE_DEVCTL 2142 usb_notify_addq("DETACH", udev); 2143 #endif 2144 2145 #if USB_HAVE_UGEN 2146 if (!rebooting) { 2147 printf("%s: <%s> at %s (disconnected)\n", udev->ugen_name, 2148 usb_get_manufacturer(udev), device_get_nameunit(bus->bdev)); 2149 } 2150 2151 /* Destroy UGEN symlink, if any */ 2152 if (udev->ugen_symlink) { 2153 usb_free_symlink(udev->ugen_symlink); 2154 udev->ugen_symlink = NULL; 2155 } 2156 2157 usb_destroy_dev(udev->ctrl_dev); 2158 #endif 2159 2160 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2161 /* stop receiving any control transfers (Device Side Mode) */ 2162 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2163 } 2164 2165 /* the following will get the device unconfigured in software */ 2166 usb_unconfigure(udev, USB_UNCFG_FLAG_FREE_EP0); 2167 2168 /* final device unregister after all character devices are closed */ 2169 usb_bus_port_set_device(bus, udev->parent_hub ? 2170 udev->parent_hub->hub->ports + udev->port_index : NULL, 2171 NULL, USB_ROOT_HUB_ADDR); 2172 2173 /* unsetup any leftover default USB transfers */ 2174 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2175 2176 /* template unsetup, if any */ 2177 (usb_temp_unsetup_p) (udev); 2178 2179 /* 2180 * Make sure that our clear-stall messages are not queued 2181 * anywhere: 2182 */ 2183 USB_BUS_LOCK(udev->bus); 2184 usb_proc_mwait(USB_BUS_NON_GIANT_PROC(udev->bus), 2185 &udev->cs_msg[0], &udev->cs_msg[1]); 2186 USB_BUS_UNLOCK(udev->bus); 2187 2188 /* wait for all references to go away */ 2189 usb_wait_pending_refs(udev); 2190 2191 sx_destroy(&udev->enum_sx); 2192 sx_destroy(&udev->sr_sx); 2193 2194 cv_destroy(&udev->ctrlreq_cv); 2195 cv_destroy(&udev->ref_cv); 2196 2197 mtx_destroy(&udev->device_mtx); 2198 #if USB_HAVE_UGEN 2199 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("leaked cdev entries")); 2200 #endif 2201 2202 /* Uninitialise device */ 2203 if (bus->methods->device_uninit != NULL) 2204 (bus->methods->device_uninit) (udev); 2205 2206 /* free device */ 2207 free(udev->serial, M_USB); 2208 free(udev->manufacturer, M_USB); 2209 free(udev->product, M_USB); 2210 free(udev, M_USB); 2211 } 2212 2213 /*------------------------------------------------------------------------* 2214 * usbd_get_iface 2215 * 2216 * This function is the safe way to get the USB interface structure 2217 * pointer by interface index. 2218 * 2219 * Return values: 2220 * NULL: Interface not present. 2221 * Else: Pointer to USB interface structure. 2222 *------------------------------------------------------------------------*/ 2223 struct usb_interface * 2224 usbd_get_iface(struct usb_device *udev, uint8_t iface_index) 2225 { 2226 struct usb_interface *iface = udev->ifaces + iface_index; 2227 2228 if (iface_index >= udev->ifaces_max) 2229 return (NULL); 2230 return (iface); 2231 } 2232 2233 /*------------------------------------------------------------------------* 2234 * usbd_find_descriptor 2235 * 2236 * This function will lookup the first descriptor that matches the 2237 * criteria given by the arguments "type" and "subtype". Descriptors 2238 * will only be searched within the interface having the index 2239 * "iface_index". If the "id" argument points to an USB descriptor, 2240 * it will be skipped before the search is started. This allows 2241 * searching for multiple descriptors using the same criteria. Else 2242 * the search is started after the interface descriptor. 2243 * 2244 * Return values: 2245 * NULL: End of descriptors 2246 * Else: A descriptor matching the criteria 2247 *------------------------------------------------------------------------*/ 2248 void * 2249 usbd_find_descriptor(struct usb_device *udev, void *id, uint8_t iface_index, 2250 uint8_t type, uint8_t type_mask, 2251 uint8_t subtype, uint8_t subtype_mask) 2252 { 2253 struct usb_descriptor *desc; 2254 struct usb_config_descriptor *cd; 2255 struct usb_interface *iface; 2256 2257 cd = usbd_get_config_descriptor(udev); 2258 if (cd == NULL) { 2259 return (NULL); 2260 } 2261 if (id == NULL) { 2262 iface = usbd_get_iface(udev, iface_index); 2263 if (iface == NULL) { 2264 return (NULL); 2265 } 2266 id = usbd_get_interface_descriptor(iface); 2267 if (id == NULL) { 2268 return (NULL); 2269 } 2270 } 2271 desc = (void *)id; 2272 2273 while ((desc = usb_desc_foreach(cd, desc))) { 2274 2275 if (desc->bDescriptorType == UDESC_INTERFACE) { 2276 break; 2277 } 2278 if (((desc->bDescriptorType & type_mask) == type) && 2279 ((desc->bDescriptorSubtype & subtype_mask) == subtype)) { 2280 return (desc); 2281 } 2282 } 2283 return (NULL); 2284 } 2285 2286 /*------------------------------------------------------------------------* 2287 * usb_devinfo 2288 * 2289 * This function will dump information from the device descriptor 2290 * belonging to the USB device pointed to by "udev", to the string 2291 * pointed to by "dst_ptr" having a maximum length of "dst_len" bytes 2292 * including the terminating zero. 2293 *------------------------------------------------------------------------*/ 2294 void 2295 usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len) 2296 { 2297 struct usb_device_descriptor *udd = &udev->ddesc; 2298 uint16_t bcdDevice; 2299 uint16_t bcdUSB; 2300 2301 bcdUSB = UGETW(udd->bcdUSB); 2302 bcdDevice = UGETW(udd->bcdDevice); 2303 2304 if (udd->bDeviceClass != 0xFF) { 2305 snprintf(dst_ptr, dst_len, "%s %s, class %d/%d, rev %x.%02x/" 2306 "%x.%02x, addr %d", 2307 usb_get_manufacturer(udev), 2308 usb_get_product(udev), 2309 udd->bDeviceClass, udd->bDeviceSubClass, 2310 (bcdUSB >> 8), bcdUSB & 0xFF, 2311 (bcdDevice >> 8), bcdDevice & 0xFF, 2312 udev->address); 2313 } else { 2314 snprintf(dst_ptr, dst_len, "%s %s, rev %x.%02x/" 2315 "%x.%02x, addr %d", 2316 usb_get_manufacturer(udev), 2317 usb_get_product(udev), 2318 (bcdUSB >> 8), bcdUSB & 0xFF, 2319 (bcdDevice >> 8), bcdDevice & 0xFF, 2320 udev->address); 2321 } 2322 } 2323 2324 #ifdef USB_VERBOSE 2325 /* 2326 * Descriptions of of known vendors and devices ("products"). 2327 */ 2328 struct usb_knowndev { 2329 uint16_t vendor; 2330 uint16_t product; 2331 uint32_t flags; 2332 const char *vendorname; 2333 const char *productname; 2334 }; 2335 2336 #define USB_KNOWNDEV_NOPROD 0x01 /* match on vendor only */ 2337 2338 #include "usbdevs.h" 2339 #include "usbdevs_data.h" 2340 #endif /* USB_VERBOSE */ 2341 2342 static void 2343 usbd_set_device_strings(struct usb_device *udev) 2344 { 2345 struct usb_device_descriptor *udd = &udev->ddesc; 2346 #ifdef USB_VERBOSE 2347 const struct usb_knowndev *kdp; 2348 #endif 2349 char *temp_ptr; 2350 size_t temp_size; 2351 uint16_t vendor_id; 2352 uint16_t product_id; 2353 uint8_t do_unlock; 2354 2355 /* Protect scratch area */ 2356 do_unlock = usbd_enum_lock(udev); 2357 2358 temp_ptr = (char *)udev->scratch.data; 2359 temp_size = sizeof(udev->scratch.data); 2360 2361 vendor_id = UGETW(udd->idVendor); 2362 product_id = UGETW(udd->idProduct); 2363 2364 /* get serial number string */ 2365 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2366 udev->ddesc.iSerialNumber); 2367 udev->serial = strdup(temp_ptr, M_USB); 2368 2369 /* get manufacturer string */ 2370 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2371 udev->ddesc.iManufacturer); 2372 usb_trim_spaces(temp_ptr); 2373 if (temp_ptr[0] != '\0') 2374 udev->manufacturer = strdup(temp_ptr, M_USB); 2375 2376 /* get product string */ 2377 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2378 udev->ddesc.iProduct); 2379 usb_trim_spaces(temp_ptr); 2380 if (temp_ptr[0] != '\0') 2381 udev->product = strdup(temp_ptr, M_USB); 2382 2383 #ifdef USB_VERBOSE 2384 if (udev->manufacturer == NULL || udev->product == NULL) { 2385 for (kdp = usb_knowndevs; kdp->vendorname != NULL; kdp++) { 2386 if (kdp->vendor == vendor_id && 2387 (kdp->product == product_id || 2388 (kdp->flags & USB_KNOWNDEV_NOPROD) != 0)) 2389 break; 2390 } 2391 if (kdp->vendorname != NULL) { 2392 /* XXX should use pointer to knowndevs string */ 2393 if (udev->manufacturer == NULL) { 2394 udev->manufacturer = strdup(kdp->vendorname, 2395 M_USB); 2396 } 2397 if (udev->product == NULL && 2398 (kdp->flags & USB_KNOWNDEV_NOPROD) == 0) { 2399 udev->product = strdup(kdp->productname, 2400 M_USB); 2401 } 2402 } 2403 } 2404 #endif 2405 /* Provide default strings if none were found */ 2406 if (udev->manufacturer == NULL) { 2407 snprintf(temp_ptr, temp_size, "vendor 0x%04x", vendor_id); 2408 udev->manufacturer = strdup(temp_ptr, M_USB); 2409 } 2410 if (udev->product == NULL) { 2411 snprintf(temp_ptr, temp_size, "product 0x%04x", product_id); 2412 udev->product = strdup(temp_ptr, M_USB); 2413 } 2414 2415 if (do_unlock) 2416 usbd_enum_unlock(udev); 2417 } 2418 2419 /* 2420 * Returns: 2421 * See: USB_MODE_XXX 2422 */ 2423 enum usb_hc_mode 2424 usbd_get_mode(struct usb_device *udev) 2425 { 2426 return (udev->flags.usb_mode); 2427 } 2428 2429 /* 2430 * Returns: 2431 * See: USB_SPEED_XXX 2432 */ 2433 enum usb_dev_speed 2434 usbd_get_speed(struct usb_device *udev) 2435 { 2436 return (udev->speed); 2437 } 2438 2439 uint32_t 2440 usbd_get_isoc_fps(struct usb_device *udev) 2441 { 2442 ; /* indent fix */ 2443 switch (udev->speed) { 2444 case USB_SPEED_LOW: 2445 case USB_SPEED_FULL: 2446 return (1000); 2447 default: 2448 return (8000); 2449 } 2450 } 2451 2452 struct usb_device_descriptor * 2453 usbd_get_device_descriptor(struct usb_device *udev) 2454 { 2455 if (udev == NULL) 2456 return (NULL); /* be NULL safe */ 2457 return (&udev->ddesc); 2458 } 2459 2460 struct usb_config_descriptor * 2461 usbd_get_config_descriptor(struct usb_device *udev) 2462 { 2463 if (udev == NULL) 2464 return (NULL); /* be NULL safe */ 2465 return (udev->cdesc); 2466 } 2467 2468 /*------------------------------------------------------------------------* 2469 * usb_test_quirk - test a device for a given quirk 2470 * 2471 * Return values: 2472 * 0: The USB device does not have the given quirk. 2473 * Else: The USB device has the given quirk. 2474 *------------------------------------------------------------------------*/ 2475 uint8_t 2476 usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk) 2477 { 2478 uint8_t found; 2479 uint8_t x; 2480 2481 if (quirk == UQ_NONE) 2482 return (0); 2483 2484 /* search the automatic per device quirks first */ 2485 2486 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 2487 if (uaa->device->autoQuirk[x] == quirk) 2488 return (1); 2489 } 2490 2491 /* search global quirk table, if any */ 2492 2493 found = (usb_test_quirk_p) (&uaa->info, quirk); 2494 2495 return (found); 2496 } 2497 2498 struct usb_interface_descriptor * 2499 usbd_get_interface_descriptor(struct usb_interface *iface) 2500 { 2501 if (iface == NULL) 2502 return (NULL); /* be NULL safe */ 2503 return (iface->idesc); 2504 } 2505 2506 uint8_t 2507 usbd_get_interface_altindex(struct usb_interface *iface) 2508 { 2509 return (iface->alt_index); 2510 } 2511 2512 uint8_t 2513 usbd_get_bus_index(struct usb_device *udev) 2514 { 2515 return ((uint8_t)device_get_unit(udev->bus->bdev)); 2516 } 2517 2518 uint8_t 2519 usbd_get_device_index(struct usb_device *udev) 2520 { 2521 return (udev->device_index); 2522 } 2523 2524 #if USB_HAVE_DEVCTL 2525 static void 2526 usb_notify_addq(const char *type, struct usb_device *udev) 2527 { 2528 struct usb_interface *iface; 2529 struct sbuf *sb; 2530 int i; 2531 2532 /* announce the device */ 2533 sb = sbuf_new_auto(); 2534 sbuf_printf(sb, 2535 #if USB_HAVE_UGEN 2536 "ugen=%s " 2537 "cdev=%s " 2538 #endif 2539 "vendor=0x%04x " 2540 "product=0x%04x " 2541 "devclass=0x%02x " 2542 "devsubclass=0x%02x " 2543 "sernum=\"%s\" " 2544 "release=0x%04x " 2545 "mode=%s " 2546 "port=%u " 2547 #if USB_HAVE_UGEN 2548 "parent=%s" 2549 #endif 2550 "", 2551 #if USB_HAVE_UGEN 2552 udev->ugen_name, 2553 udev->ugen_name, 2554 #endif 2555 UGETW(udev->ddesc.idVendor), 2556 UGETW(udev->ddesc.idProduct), 2557 udev->ddesc.bDeviceClass, 2558 udev->ddesc.bDeviceSubClass, 2559 usb_get_serial(udev), 2560 UGETW(udev->ddesc.bcdDevice), 2561 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2562 udev->port_no 2563 #if USB_HAVE_UGEN 2564 , udev->parent_hub != NULL ? 2565 udev->parent_hub->ugen_name : 2566 device_get_nameunit(device_get_parent(udev->bus->bdev)) 2567 #endif 2568 ); 2569 sbuf_finish(sb); 2570 devctl_notify("USB", "DEVICE", type, sbuf_data(sb)); 2571 sbuf_delete(sb); 2572 2573 /* announce each interface */ 2574 for (i = 0; i < USB_IFACE_MAX; i++) { 2575 iface = usbd_get_iface(udev, i); 2576 if (iface == NULL) 2577 break; /* end of interfaces */ 2578 if (iface->idesc == NULL) 2579 continue; /* no interface descriptor */ 2580 2581 sb = sbuf_new_auto(); 2582 sbuf_printf(sb, 2583 #if USB_HAVE_UGEN 2584 "ugen=%s " 2585 "cdev=%s " 2586 #endif 2587 "vendor=0x%04x " 2588 "product=0x%04x " 2589 "devclass=0x%02x " 2590 "devsubclass=0x%02x " 2591 "sernum=\"%s\" " 2592 "release=0x%04x " 2593 "mode=%s " 2594 "interface=%d " 2595 "endpoints=%d " 2596 "intclass=0x%02x " 2597 "intsubclass=0x%02x " 2598 "intprotocol=0x%02x", 2599 #if USB_HAVE_UGEN 2600 udev->ugen_name, 2601 udev->ugen_name, 2602 #endif 2603 UGETW(udev->ddesc.idVendor), 2604 UGETW(udev->ddesc.idProduct), 2605 udev->ddesc.bDeviceClass, 2606 udev->ddesc.bDeviceSubClass, 2607 usb_get_serial(udev), 2608 UGETW(udev->ddesc.bcdDevice), 2609 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2610 iface->idesc->bInterfaceNumber, 2611 iface->idesc->bNumEndpoints, 2612 iface->idesc->bInterfaceClass, 2613 iface->idesc->bInterfaceSubClass, 2614 iface->idesc->bInterfaceProtocol); 2615 sbuf_finish(sb); 2616 devctl_notify("USB", "INTERFACE", type, sbuf_data(sb)); 2617 sbuf_delete(sb); 2618 } 2619 } 2620 #endif 2621 2622 #if USB_HAVE_UGEN 2623 /*------------------------------------------------------------------------* 2624 * usb_fifo_free_wrap 2625 * 2626 * This function will free the FIFOs. 2627 * 2628 * Description of "flag" argument: If the USB_UNCFG_FLAG_FREE_EP0 flag 2629 * is set and "iface_index" is set to "USB_IFACE_INDEX_ANY", we free 2630 * all FIFOs. If the USB_UNCFG_FLAG_FREE_EP0 flag is not set and 2631 * "iface_index" is set to "USB_IFACE_INDEX_ANY", we free all non 2632 * control endpoint FIFOs. If "iface_index" is not set to 2633 * "USB_IFACE_INDEX_ANY" the flag has no effect. 2634 *------------------------------------------------------------------------*/ 2635 static void 2636 usb_fifo_free_wrap(struct usb_device *udev, 2637 uint8_t iface_index, uint8_t flag) 2638 { 2639 struct usb_fifo *f; 2640 uint16_t i; 2641 2642 /* 2643 * Free any USB FIFOs on the given interface: 2644 */ 2645 for (i = 0; i != USB_FIFO_MAX; i++) { 2646 f = udev->fifo[i]; 2647 if (f == NULL) { 2648 continue; 2649 } 2650 /* Check if the interface index matches */ 2651 if (iface_index == f->iface_index) { 2652 if (f->methods != &usb_ugen_methods) { 2653 /* 2654 * Don't free any non-generic FIFOs in 2655 * this case. 2656 */ 2657 continue; 2658 } 2659 if ((f->dev_ep_index == 0) && 2660 (f->fs_xfer == NULL)) { 2661 /* no need to free this FIFO */ 2662 continue; 2663 } 2664 } else if (iface_index == USB_IFACE_INDEX_ANY) { 2665 if ((f->methods == &usb_ugen_methods) && 2666 (f->dev_ep_index == 0) && 2667 (!(flag & USB_UNCFG_FLAG_FREE_EP0)) && 2668 (f->fs_xfer == NULL)) { 2669 /* no need to free this FIFO */ 2670 continue; 2671 } 2672 } else { 2673 /* no need to free this FIFO */ 2674 continue; 2675 } 2676 /* free this FIFO */ 2677 usb_fifo_free(f); 2678 } 2679 } 2680 #endif 2681 2682 /*------------------------------------------------------------------------* 2683 * usb_peer_can_wakeup 2684 * 2685 * Return values: 2686 * 0: Peer cannot do resume signalling. 2687 * Else: Peer can do resume signalling. 2688 *------------------------------------------------------------------------*/ 2689 uint8_t 2690 usb_peer_can_wakeup(struct usb_device *udev) 2691 { 2692 const struct usb_config_descriptor *cdp; 2693 2694 cdp = udev->cdesc; 2695 if ((cdp != NULL) && (udev->flags.usb_mode == USB_MODE_HOST)) { 2696 return (cdp->bmAttributes & UC_REMOTE_WAKEUP); 2697 } 2698 return (0); /* not supported */ 2699 } 2700 2701 void 2702 usb_set_device_state(struct usb_device *udev, enum usb_dev_state state) 2703 { 2704 2705 KASSERT(state < USB_STATE_MAX, ("invalid udev state")); 2706 2707 DPRINTF("udev %p state %s -> %s\n", udev, 2708 usb_statestr(udev->state), usb_statestr(state)); 2709 2710 #if USB_HAVE_UGEN 2711 mtx_lock(&usb_ref_lock); 2712 #endif 2713 udev->state = state; 2714 #if USB_HAVE_UGEN 2715 mtx_unlock(&usb_ref_lock); 2716 #endif 2717 if (udev->bus->methods->device_state_change != NULL) 2718 (udev->bus->methods->device_state_change) (udev); 2719 } 2720 2721 enum usb_dev_state 2722 usb_get_device_state(struct usb_device *udev) 2723 { 2724 if (udev == NULL) 2725 return (USB_STATE_DETACHED); 2726 return (udev->state); 2727 } 2728 2729 uint8_t 2730 usbd_device_attached(struct usb_device *udev) 2731 { 2732 return (udev->state > USB_STATE_DETACHED); 2733 } 2734 2735 /* 2736 * The following function locks enumerating the given USB device. If 2737 * the lock is already grabbed this function returns zero. Else a 2738 * non-zero value is returned. 2739 */ 2740 uint8_t 2741 usbd_enum_lock(struct usb_device *udev) 2742 { 2743 if (sx_xlocked(&udev->enum_sx)) 2744 return (0); 2745 2746 sx_xlock(&udev->enum_sx); 2747 sx_xlock(&udev->sr_sx); 2748 /* 2749 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2750 * are locked before locking Giant. Else the lock can be 2751 * locked multiple times. 2752 */ 2753 mtx_lock(&Giant); 2754 return (1); 2755 } 2756 2757 /* The following function unlocks enumerating the given USB device. */ 2758 2759 void 2760 usbd_enum_unlock(struct usb_device *udev) 2761 { 2762 mtx_unlock(&Giant); 2763 sx_xunlock(&udev->enum_sx); 2764 sx_xunlock(&udev->sr_sx); 2765 } 2766 2767 /* The following function locks suspend and resume. */ 2768 2769 void 2770 usbd_sr_lock(struct usb_device *udev) 2771 { 2772 sx_xlock(&udev->sr_sx); 2773 /* 2774 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2775 * are locked before locking Giant. Else the lock can be 2776 * locked multiple times. 2777 */ 2778 mtx_lock(&Giant); 2779 } 2780 2781 /* The following function unlocks suspend and resume. */ 2782 2783 void 2784 usbd_sr_unlock(struct usb_device *udev) 2785 { 2786 mtx_unlock(&Giant); 2787 sx_xunlock(&udev->sr_sx); 2788 } 2789 2790 /* 2791 * The following function checks the enumerating lock for the given 2792 * USB device. 2793 */ 2794 2795 uint8_t 2796 usbd_enum_is_locked(struct usb_device *udev) 2797 { 2798 return (sx_xlocked(&udev->enum_sx)); 2799 } 2800 2801 /* 2802 * The following function is used to set the per-interface specific 2803 * plug and play information. The string referred to by the pnpinfo 2804 * argument can safely be freed after calling this function. The 2805 * pnpinfo of an interface will be reset at device detach or when 2806 * passing a NULL argument to this function. This function 2807 * returns zero on success, else a USB_ERR_XXX failure code. 2808 */ 2809 2810 usb_error_t 2811 usbd_set_pnpinfo(struct usb_device *udev, uint8_t iface_index, const char *pnpinfo) 2812 { 2813 struct usb_interface *iface; 2814 2815 iface = usbd_get_iface(udev, iface_index); 2816 if (iface == NULL) 2817 return (USB_ERR_INVAL); 2818 2819 if (iface->pnpinfo != NULL) { 2820 free(iface->pnpinfo, M_USBDEV); 2821 iface->pnpinfo = NULL; 2822 } 2823 2824 if (pnpinfo == NULL || pnpinfo[0] == 0) 2825 return (0); /* success */ 2826 2827 iface->pnpinfo = strdup(pnpinfo, M_USBDEV); 2828 if (iface->pnpinfo == NULL) 2829 return (USB_ERR_NOMEM); 2830 2831 return (0); /* success */ 2832 } 2833 2834 usb_error_t 2835 usbd_add_dynamic_quirk(struct usb_device *udev, uint16_t quirk) 2836 { 2837 uint8_t x; 2838 2839 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 2840 if (udev->autoQuirk[x] == 0 || 2841 udev->autoQuirk[x] == quirk) { 2842 udev->autoQuirk[x] = quirk; 2843 return (0); /* success */ 2844 } 2845 } 2846 return (USB_ERR_NOMEM); 2847 } 2848 2849 /* 2850 * The following function is used to select the endpoint mode. It 2851 * should not be called outside enumeration context. 2852 */ 2853 2854 usb_error_t 2855 usbd_set_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep, 2856 uint8_t ep_mode) 2857 { 2858 usb_error_t error; 2859 uint8_t do_unlock; 2860 2861 /* Prevent re-enumeration */ 2862 do_unlock = usbd_enum_lock(udev); 2863 2864 if (udev->bus->methods->set_endpoint_mode != NULL) { 2865 error = (udev->bus->methods->set_endpoint_mode) ( 2866 udev, ep, ep_mode); 2867 } else if (ep_mode != USB_EP_MODE_DEFAULT) { 2868 error = USB_ERR_INVAL; 2869 } else { 2870 error = 0; 2871 } 2872 2873 /* only set new mode regardless of error */ 2874 ep->ep_mode = ep_mode; 2875 2876 if (do_unlock) 2877 usbd_enum_unlock(udev); 2878 return (error); 2879 } 2880 2881 uint8_t 2882 usbd_get_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep) 2883 { 2884 return (ep->ep_mode); 2885 } 2886