1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2008-2023 Hans Petter Selasky 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 #ifdef USB_GLOBAL_INCLUDE_FILE 29 #include USB_GLOBAL_INCLUDE_FILE 30 #else 31 #include <sys/stdint.h> 32 #include <sys/stddef.h> 33 #include <sys/param.h> 34 #include <sys/eventhandler.h> 35 #include <sys/queue.h> 36 #include <sys/systm.h> 37 #include <sys/kernel.h> 38 #include <sys/bus.h> 39 #include <sys/module.h> 40 #include <sys/lock.h> 41 #include <sys/mutex.h> 42 #include <sys/condvar.h> 43 #include <sys/sysctl.h> 44 #include <sys/sx.h> 45 #include <sys/unistd.h> 46 #include <sys/callout.h> 47 #include <sys/malloc.h> 48 #include <sys/priv.h> 49 #include <sys/conf.h> 50 #include <sys/fcntl.h> 51 52 #include <dev/usb/usb.h> 53 #include <dev/usb/usbdi.h> 54 #include <dev/usb/usbdi_util.h> 55 #include <dev/usb/usb_ioctl.h> 56 57 #if USB_HAVE_UGEN 58 #include <sys/sbuf.h> 59 #endif 60 61 #include "usbdevs.h" 62 63 #define USB_DEBUG_VAR usb_debug 64 65 #include <dev/usb/usb_core.h> 66 #include <dev/usb/usb_debug.h> 67 #include <dev/usb/usb_process.h> 68 #include <dev/usb/usb_device.h> 69 #include <dev/usb/usb_busdma.h> 70 #include <dev/usb/usb_transfer.h> 71 #include <dev/usb/usb_request.h> 72 #include <dev/usb/usb_dynamic.h> 73 #include <dev/usb/usb_hub.h> 74 #include <dev/usb/usb_util.h> 75 #include <dev/usb/usb_msctest.h> 76 #if USB_HAVE_UGEN 77 #include <dev/usb/usb_dev.h> 78 #include <dev/usb/usb_generic.h> 79 #endif 80 81 #include <dev/usb/quirk/usb_quirk.h> 82 83 #include <dev/usb/usb_controller.h> 84 #include <dev/usb/usb_bus.h> 85 #endif /* USB_GLOBAL_INCLUDE_FILE */ 86 87 /* function prototypes */ 88 89 static int sysctl_hw_usb_template(SYSCTL_HANDLER_ARGS); 90 static void usb_init_endpoint(struct usb_device *, uint8_t, 91 struct usb_endpoint_descriptor *, 92 struct usb_endpoint_ss_comp_descriptor *, 93 struct usb_endpoint *); 94 static void usb_unconfigure(struct usb_device *, uint8_t); 95 static void usb_detach_device_sub(struct usb_device *, device_t *, 96 char **, uint8_t); 97 static uint8_t usb_probe_and_attach_sub(struct usb_device *, 98 struct usb_attach_arg *); 99 static void usb_init_attach_arg(struct usb_device *, 100 struct usb_attach_arg *); 101 static void usb_suspend_resume_sub(struct usb_device *, device_t, 102 uint8_t); 103 static usb_proc_callback_t usbd_clear_stall_proc; 104 static usb_error_t usb_config_parse(struct usb_device *, uint8_t, uint8_t); 105 #if USB_HAVE_DEVCTL 106 static void usb_notify_addq(const char *type, struct usb_device *); 107 #endif 108 #if USB_HAVE_UGEN 109 static void usb_fifo_free_wrap(struct usb_device *, uint8_t, uint8_t); 110 static void usb_cdev_create(struct usb_device *); 111 static void usb_cdev_free(struct usb_device *); 112 #endif 113 114 /* This variable is global to allow easy access to it: */ 115 116 #ifdef USB_TEMPLATE 117 int usb_template = USB_TEMPLATE; 118 #else 119 int usb_template = -1; 120 #endif 121 122 SYSCTL_PROC(_hw_usb, OID_AUTO, template, 123 CTLTYPE_INT | CTLFLAG_RWTUN | CTLFLAG_MPSAFE, 124 NULL, 0, sysctl_hw_usb_template, 125 "I", "Selected USB device side template"); 126 127 /*------------------------------------------------------------------------* 128 * usb_trigger_reprobe_on_off 129 * 130 * This function sets the pull up resistors for all ports currently 131 * operating in device mode either on (when on_not_off is 1), or off 132 * (when it's 0). 133 *------------------------------------------------------------------------*/ 134 static void 135 usb_trigger_reprobe_on_off(int on_not_off) 136 { 137 struct usb_port_status ps; 138 struct usb_bus *bus; 139 struct usb_device *udev; 140 usb_error_t err; 141 int do_unlock, max; 142 143 max = devclass_get_maxunit(usb_devclass_ptr); 144 while (max >= 0) { 145 mtx_lock(&usb_ref_lock); 146 bus = devclass_get_softc(usb_devclass_ptr, max); 147 max--; 148 149 if (bus == NULL || bus->devices == NULL || 150 bus->devices[USB_ROOT_HUB_ADDR] == NULL) { 151 mtx_unlock(&usb_ref_lock); 152 continue; 153 } 154 155 udev = bus->devices[USB_ROOT_HUB_ADDR]; 156 157 if (udev->refcount == USB_DEV_REF_MAX) { 158 mtx_unlock(&usb_ref_lock); 159 continue; 160 } 161 162 udev->refcount++; 163 mtx_unlock(&usb_ref_lock); 164 165 do_unlock = usbd_enum_lock(udev); 166 if (do_unlock > 1) { 167 do_unlock = 0; 168 goto next; 169 } 170 171 err = usbd_req_get_port_status(udev, NULL, &ps, 1); 172 if (err != 0) { 173 DPRINTF("usbd_req_get_port_status() " 174 "failed: %s\n", usbd_errstr(err)); 175 goto next; 176 } 177 178 if ((UGETW(ps.wPortStatus) & UPS_PORT_MODE_DEVICE) == 0) 179 goto next; 180 181 if (on_not_off) { 182 err = usbd_req_set_port_feature(udev, NULL, 1, 183 UHF_PORT_POWER); 184 if (err != 0) { 185 DPRINTF("usbd_req_set_port_feature() " 186 "failed: %s\n", usbd_errstr(err)); 187 } 188 } else { 189 err = usbd_req_clear_port_feature(udev, NULL, 1, 190 UHF_PORT_POWER); 191 if (err != 0) { 192 DPRINTF("usbd_req_clear_port_feature() " 193 "failed: %s\n", usbd_errstr(err)); 194 } 195 } 196 197 next: 198 mtx_lock(&usb_ref_lock); 199 if (do_unlock) 200 usbd_enum_unlock(udev); 201 if (--(udev->refcount) == 0) 202 cv_broadcast(&udev->ref_cv); 203 mtx_unlock(&usb_ref_lock); 204 } 205 } 206 207 /*------------------------------------------------------------------------* 208 * usb_trigger_reprobe_all 209 * 210 * This function toggles the pull up resistors for all ports currently 211 * operating in device mode, causing the host machine to reenumerate them. 212 *------------------------------------------------------------------------*/ 213 static void 214 usb_trigger_reprobe_all(void) 215 { 216 217 /* 218 * Set the pull up resistors off for all ports in device mode. 219 */ 220 usb_trigger_reprobe_on_off(0); 221 222 /* 223 * According to the DWC OTG spec this must be at least 3ms. 224 */ 225 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 226 227 /* 228 * Set the pull up resistors back on. 229 */ 230 usb_trigger_reprobe_on_off(1); 231 } 232 233 static int 234 sysctl_hw_usb_template(SYSCTL_HANDLER_ARGS) 235 { 236 int error, val; 237 238 val = usb_template; 239 error = sysctl_handle_int(oidp, &val, 0, req); 240 if (error != 0 || req->newptr == NULL || usb_template == val) 241 return (error); 242 243 usb_template = val; 244 245 if (usb_template < 0) { 246 usb_trigger_reprobe_on_off(0); 247 } else { 248 usb_trigger_reprobe_all(); 249 } 250 251 return (0); 252 } 253 254 /* English is default language */ 255 256 static int usb_lang_id = 0x0009; 257 static int usb_lang_mask = 0x00FF; 258 259 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_id, CTLFLAG_RWTUN, 260 &usb_lang_id, 0, "Preferred USB language ID"); 261 262 SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_mask, CTLFLAG_RWTUN, 263 &usb_lang_mask, 0, "Preferred USB language mask"); 264 265 static const char* statestr[USB_STATE_MAX] = { 266 [USB_STATE_DETACHED] = "DETACHED", 267 [USB_STATE_ATTACHED] = "ATTACHED", 268 [USB_STATE_POWERED] = "POWERED", 269 [USB_STATE_ADDRESSED] = "ADDRESSED", 270 [USB_STATE_CONFIGURED] = "CONFIGURED", 271 }; 272 273 const char * 274 usb_statestr(enum usb_dev_state state) 275 { 276 return ((state < USB_STATE_MAX) ? statestr[state] : "UNKNOWN"); 277 } 278 279 const char * 280 usb_get_manufacturer(struct usb_device *udev) 281 { 282 return (udev->manufacturer ? udev->manufacturer : "Unknown"); 283 } 284 285 const char * 286 usb_get_product(struct usb_device *udev) 287 { 288 return (udev->product ? udev->product : ""); 289 } 290 291 const char * 292 usb_get_serial(struct usb_device *udev) 293 { 294 return (udev->serial ? udev->serial : ""); 295 } 296 297 /*------------------------------------------------------------------------* 298 * usbd_get_ep_by_addr 299 * 300 * This function searches for an USB ep by endpoint address and 301 * direction. 302 * 303 * Returns: 304 * NULL: Failure 305 * Else: Success 306 *------------------------------------------------------------------------*/ 307 struct usb_endpoint * 308 usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val) 309 { 310 struct usb_endpoint *ep = udev->endpoints; 311 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 312 enum { 313 EA_MASK = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR), 314 }; 315 316 /* 317 * According to the USB specification not all bits are used 318 * for the endpoint address. Keep defined bits only: 319 */ 320 ea_val &= EA_MASK; 321 322 /* 323 * Iterate across all the USB endpoints searching for a match 324 * based on the endpoint address: 325 */ 326 for (; ep != ep_end; ep++) { 327 if (ep->edesc == NULL) { 328 continue; 329 } 330 /* do the mask and check the value */ 331 if ((ep->edesc->bEndpointAddress & EA_MASK) == ea_val) { 332 goto found; 333 } 334 } 335 336 /* 337 * The default endpoint is always present and is checked separately: 338 */ 339 if ((udev->ctrl_ep.edesc != NULL) && 340 ((udev->ctrl_ep.edesc->bEndpointAddress & EA_MASK) == ea_val)) { 341 ep = &udev->ctrl_ep; 342 goto found; 343 } 344 return (NULL); 345 346 found: 347 return (ep); 348 } 349 350 /*------------------------------------------------------------------------* 351 * usbd_get_endpoint 352 * 353 * This function searches for an USB endpoint based on the information 354 * given by the passed "struct usb_config" pointer. 355 * 356 * Return values: 357 * NULL: No match. 358 * Else: Pointer to "struct usb_endpoint". 359 *------------------------------------------------------------------------*/ 360 struct usb_endpoint * 361 usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index, 362 const struct usb_config *setup) 363 { 364 struct usb_endpoint *ep = udev->endpoints; 365 struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max; 366 uint8_t index = setup->ep_index; 367 uint8_t ea_mask; 368 uint8_t ea_val; 369 uint8_t type_mask; 370 uint8_t type_val; 371 372 DPRINTFN(10, "udev=%p iface_index=%d address=0x%x " 373 "type=0x%x dir=0x%x index=%d\n", 374 udev, iface_index, setup->endpoint, 375 setup->type, setup->direction, setup->ep_index); 376 377 /* check USB mode */ 378 379 if (setup->usb_mode != USB_MODE_DUAL && 380 udev->flags.usb_mode != setup->usb_mode) { 381 /* wrong mode - no endpoint */ 382 return (NULL); 383 } 384 385 /* setup expected endpoint direction mask and value */ 386 387 if (setup->direction == UE_DIR_RX) { 388 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 389 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 390 UE_DIR_OUT : UE_DIR_IN; 391 } else if (setup->direction == UE_DIR_TX) { 392 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 393 ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ? 394 UE_DIR_IN : UE_DIR_OUT; 395 } else if (setup->direction == UE_DIR_ANY) { 396 /* match any endpoint direction */ 397 ea_mask = 0; 398 ea_val = 0; 399 } else { 400 /* match the given endpoint direction */ 401 ea_mask = (UE_DIR_IN | UE_DIR_OUT); 402 ea_val = (setup->direction & (UE_DIR_IN | UE_DIR_OUT)); 403 } 404 405 /* setup expected endpoint address */ 406 407 if (setup->endpoint == UE_ADDR_ANY) { 408 /* match any endpoint address */ 409 } else { 410 /* match the given endpoint address */ 411 ea_mask |= UE_ADDR; 412 ea_val |= (setup->endpoint & UE_ADDR); 413 } 414 415 /* setup expected endpoint type */ 416 417 if (setup->type == UE_BULK_INTR) { 418 /* this will match BULK and INTERRUPT endpoints */ 419 type_mask = 2; 420 type_val = 2; 421 } else if (setup->type == UE_TYPE_ANY) { 422 /* match any endpoint type */ 423 type_mask = 0; 424 type_val = 0; 425 } else { 426 /* match the given endpoint type */ 427 type_mask = UE_XFERTYPE; 428 type_val = (setup->type & UE_XFERTYPE); 429 } 430 431 /* 432 * Iterate across all the USB endpoints searching for a match 433 * based on the endpoint address. Note that we are searching 434 * the endpoints from the beginning of the "udev->endpoints" array. 435 */ 436 for (; ep != ep_end; ep++) { 437 if ((ep->edesc == NULL) || 438 (ep->iface_index != iface_index)) { 439 continue; 440 } 441 /* do the masks and check the values */ 442 443 if (((ep->edesc->bEndpointAddress & ea_mask) == ea_val) && 444 ((ep->edesc->bmAttributes & type_mask) == type_val)) { 445 if (!index--) { 446 goto found; 447 } 448 } 449 } 450 451 /* 452 * Match against default endpoint last, so that "any endpoint", "any 453 * address" and "any direction" returns the first endpoint of the 454 * interface. "iface_index" and "direction" is ignored: 455 */ 456 if ((udev->ctrl_ep.edesc != NULL) && 457 ((udev->ctrl_ep.edesc->bEndpointAddress & ea_mask) == ea_val) && 458 ((udev->ctrl_ep.edesc->bmAttributes & type_mask) == type_val) && 459 (!index)) { 460 ep = &udev->ctrl_ep; 461 goto found; 462 } 463 return (NULL); 464 465 found: 466 return (ep); 467 } 468 469 /*------------------------------------------------------------------------* 470 * usbd_interface_count 471 * 472 * This function stores the number of USB interfaces excluding 473 * alternate settings, which the USB config descriptor reports into 474 * the unsigned 8-bit integer pointed to by "count". 475 * 476 * Returns: 477 * 0: Success 478 * Else: Failure 479 *------------------------------------------------------------------------*/ 480 usb_error_t 481 usbd_interface_count(struct usb_device *udev, uint8_t *count) 482 { 483 if (udev->cdesc == NULL) { 484 *count = 0; 485 return (USB_ERR_NOT_CONFIGURED); 486 } 487 *count = udev->ifaces_max; 488 return (USB_ERR_NORMAL_COMPLETION); 489 } 490 491 /*------------------------------------------------------------------------* 492 * usb_init_endpoint 493 * 494 * This function will initialise the USB endpoint structure pointed to by 495 * the "endpoint" argument. The structure pointed to by "endpoint" must be 496 * zeroed before calling this function. 497 *------------------------------------------------------------------------*/ 498 static void 499 usb_init_endpoint(struct usb_device *udev, uint8_t iface_index, 500 struct usb_endpoint_descriptor *edesc, 501 struct usb_endpoint_ss_comp_descriptor *ecomp, 502 struct usb_endpoint *ep) 503 { 504 const struct usb_bus_methods *methods; 505 usb_stream_t x; 506 507 methods = udev->bus->methods; 508 509 (methods->endpoint_init) (udev, edesc, ep); 510 511 /* initialise USB endpoint structure */ 512 ep->edesc = edesc; 513 ep->ecomp = ecomp; 514 ep->iface_index = iface_index; 515 516 /* setup USB stream queues */ 517 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 518 TAILQ_INIT(&ep->endpoint_q[x].head); 519 ep->endpoint_q[x].command = &usbd_pipe_start; 520 } 521 522 /* the pipe is not supported by the hardware */ 523 if (ep->methods == NULL) 524 return; 525 526 /* check for SUPER-speed streams mode endpoint */ 527 if (udev->speed == USB_SPEED_SUPER && ecomp != NULL && 528 (edesc->bmAttributes & UE_XFERTYPE) == UE_BULK && 529 (UE_GET_BULK_STREAMS(ecomp->bmAttributes) != 0)) { 530 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_STREAMS); 531 } else { 532 usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_DEFAULT); 533 } 534 535 /* clear stall, if any */ 536 if (methods->clear_stall != NULL) { 537 USB_BUS_LOCK(udev->bus); 538 (methods->clear_stall) (udev, ep); 539 USB_BUS_UNLOCK(udev->bus); 540 } 541 } 542 543 /*-----------------------------------------------------------------------* 544 * usb_endpoint_foreach 545 * 546 * This function will iterate all the USB endpoints except the control 547 * endpoint. This function is NULL safe. 548 * 549 * Return values: 550 * NULL: End of USB endpoints 551 * Else: Pointer to next USB endpoint 552 *------------------------------------------------------------------------*/ 553 struct usb_endpoint * 554 usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep) 555 { 556 struct usb_endpoint *ep_end; 557 558 /* be NULL safe */ 559 if (udev == NULL) 560 return (NULL); 561 562 ep_end = udev->endpoints + udev->endpoints_max; 563 564 /* get next endpoint */ 565 if (ep == NULL) 566 ep = udev->endpoints; 567 else 568 ep++; 569 570 /* find next allocated ep */ 571 while (ep != ep_end) { 572 if (ep->edesc != NULL) 573 return (ep); 574 ep++; 575 } 576 return (NULL); 577 } 578 579 /*------------------------------------------------------------------------* 580 * usb_wait_pending_refs 581 * 582 * This function will wait for any USB references to go away before 583 * returning. This function is used before freeing a USB device. 584 *------------------------------------------------------------------------*/ 585 static void 586 usb_wait_pending_refs(struct usb_device *udev) 587 { 588 #if USB_HAVE_UGEN 589 DPRINTF("Refcount = %d\n", (int)udev->refcount); 590 591 mtx_lock(&usb_ref_lock); 592 udev->refcount--; 593 while (1) { 594 /* wait for any pending references to go away */ 595 if (udev->refcount == 0) { 596 /* prevent further refs being taken, if any */ 597 udev->refcount = USB_DEV_REF_MAX; 598 break; 599 } 600 cv_wait(&udev->ref_cv, &usb_ref_lock); 601 } 602 mtx_unlock(&usb_ref_lock); 603 #endif 604 } 605 606 /*------------------------------------------------------------------------* 607 * usb_unconfigure 608 * 609 * This function will free all USB interfaces and USB endpoints belonging 610 * to an USB device. 611 * 612 * Flag values, see "USB_UNCFG_FLAG_XXX". 613 *------------------------------------------------------------------------*/ 614 static void 615 usb_unconfigure(struct usb_device *udev, uint8_t flag) 616 { 617 uint8_t do_unlock; 618 619 /* Prevent re-enumeration */ 620 do_unlock = usbd_enum_lock(udev); 621 622 /* detach all interface drivers */ 623 usb_detach_device(udev, USB_IFACE_INDEX_ANY, flag); 624 625 #if USB_HAVE_UGEN 626 /* free all FIFOs except control endpoint FIFOs */ 627 usb_fifo_free_wrap(udev, USB_IFACE_INDEX_ANY, flag); 628 629 /* 630 * Free all cdev's, if any. 631 */ 632 usb_cdev_free(udev); 633 #endif 634 635 #if USB_HAVE_COMPAT_LINUX 636 /* free Linux compat device, if any */ 637 if (udev->linux_endpoint_start != NULL) { 638 usb_linux_free_device_p(udev); 639 udev->linux_endpoint_start = NULL; 640 } 641 #endif 642 643 usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_FREE); 644 645 /* free "cdesc" after "ifaces" and "endpoints", if any */ 646 if (udev->cdesc != NULL) { 647 if (udev->flags.usb_mode != USB_MODE_DEVICE) 648 usbd_free_config_desc(udev, udev->cdesc); 649 udev->cdesc = NULL; 650 } 651 /* set unconfigured state */ 652 udev->curr_config_no = USB_UNCONFIG_NO; 653 udev->curr_config_index = USB_UNCONFIG_INDEX; 654 655 if (do_unlock) 656 usbd_enum_unlock(udev); 657 } 658 659 /*------------------------------------------------------------------------* 660 * usbd_set_config_index 661 * 662 * This function selects configuration by index, independent of the 663 * actual configuration number. This function should not be used by 664 * USB drivers. 665 * 666 * Returns: 667 * 0: Success 668 * Else: Failure 669 *------------------------------------------------------------------------*/ 670 usb_error_t 671 usbd_set_config_index(struct usb_device *udev, uint8_t index) 672 { 673 struct usb_status ds; 674 struct usb_config_descriptor *cdp; 675 uint16_t power; 676 uint16_t max_power; 677 uint8_t selfpowered; 678 uint8_t do_unlock; 679 usb_error_t err; 680 681 DPRINTFN(6, "udev=%p index=%d\n", udev, index); 682 683 /* Prevent re-enumeration */ 684 do_unlock = usbd_enum_lock(udev); 685 686 usb_unconfigure(udev, 0); 687 688 if (index == USB_UNCONFIG_INDEX) { 689 /* 690 * Leave unallocated when unconfiguring the 691 * device. "usb_unconfigure()" will also reset 692 * the current config number and index. 693 */ 694 err = usbd_req_set_config(udev, NULL, USB_UNCONFIG_NO); 695 if (udev->state == USB_STATE_CONFIGURED) 696 usb_set_device_state(udev, USB_STATE_ADDRESSED); 697 goto done; 698 } 699 /* get the full config descriptor */ 700 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 701 /* save some memory */ 702 err = usbd_req_get_descriptor_ptr(udev, &cdp, 703 (UDESC_CONFIG << 8) | index); 704 } else { 705 /* normal request */ 706 err = usbd_req_get_config_desc_full(udev, 707 NULL, &cdp, index); 708 } 709 if (err) { 710 goto done; 711 } 712 /* set the new config descriptor */ 713 714 udev->cdesc = cdp; 715 716 /* Figure out if the device is self or bus powered. */ 717 selfpowered = 0; 718 if ((!udev->flags.uq_bus_powered) && 719 (cdp->bmAttributes & UC_SELF_POWERED) && 720 (udev->flags.usb_mode == USB_MODE_HOST)) { 721 /* May be self powered. */ 722 if (cdp->bmAttributes & UC_BUS_POWERED) { 723 /* Must ask device. */ 724 err = usbd_req_get_device_status(udev, NULL, &ds); 725 if (err) { 726 DPRINTFN(0, "could not read " 727 "device status: %s\n", 728 usbd_errstr(err)); 729 } else if (UGETW(ds.wStatus) & UDS_SELF_POWERED) { 730 selfpowered = 1; 731 } 732 DPRINTF("status=0x%04x \n", 733 UGETW(ds.wStatus)); 734 } else 735 selfpowered = 1; 736 } 737 DPRINTF("udev=%p cdesc=%p (addr %d) cno=%d attr=0x%02x, " 738 "selfpowered=%d, power=%d\n", 739 udev, cdp, 740 udev->address, cdp->bConfigurationValue, cdp->bmAttributes, 741 selfpowered, cdp->bMaxPower * 2); 742 743 /* Check if we have enough power. */ 744 power = cdp->bMaxPower * 2; 745 746 if (udev->parent_hub) { 747 max_power = udev->parent_hub->hub->portpower; 748 } else { 749 max_power = USB_MAX_POWER; 750 } 751 752 if (power > max_power) { 753 DPRINTFN(0, "power exceeded %d > %d\n", power, max_power); 754 err = USB_ERR_NO_POWER; 755 goto done; 756 } 757 /* Only update "self_powered" in USB Host Mode */ 758 if (udev->flags.usb_mode == USB_MODE_HOST) { 759 udev->flags.self_powered = selfpowered; 760 } 761 udev->power = power; 762 udev->curr_config_no = cdp->bConfigurationValue; 763 udev->curr_config_index = index; 764 usb_set_device_state(udev, USB_STATE_CONFIGURED); 765 766 /* Set the actual configuration value. */ 767 err = usbd_req_set_config(udev, NULL, cdp->bConfigurationValue); 768 if (err) { 769 goto done; 770 } 771 772 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_ALLOC); 773 if (err) { 774 goto done; 775 } 776 777 err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_INIT); 778 if (err) { 779 goto done; 780 } 781 782 #if USB_HAVE_UGEN 783 /* create device nodes for each endpoint */ 784 usb_cdev_create(udev); 785 #endif 786 787 done: 788 DPRINTF("error=%s\n", usbd_errstr(err)); 789 if (err) { 790 usb_unconfigure(udev, 0); 791 } 792 if (do_unlock) 793 usbd_enum_unlock(udev); 794 return (err); 795 } 796 797 /*------------------------------------------------------------------------* 798 * usb_config_parse 799 * 800 * This function will allocate and free USB interfaces and USB endpoints, 801 * parse the USB configuration structure and initialise the USB endpoints 802 * and interfaces. If "iface_index" is not equal to 803 * "USB_IFACE_INDEX_ANY" then the "cmd" parameter is the 804 * alternate_setting to be selected for the given interface. Else the 805 * "cmd" parameter is defined by "USB_CFG_XXX". "iface_index" can be 806 * "USB_IFACE_INDEX_ANY" or a valid USB interface index. This function 807 * is typically called when setting the configuration or when setting 808 * an alternate interface. 809 * 810 * Returns: 811 * 0: Success 812 * Else: Failure 813 *------------------------------------------------------------------------*/ 814 static usb_error_t 815 usb_config_parse(struct usb_device *udev, uint8_t iface_index, uint8_t cmd) 816 { 817 struct usb_idesc_parse_state ips; 818 struct usb_interface_descriptor *id; 819 struct usb_endpoint_descriptor *ed; 820 struct usb_interface *iface; 821 struct usb_endpoint *ep; 822 usb_error_t err; 823 uint8_t ep_curr; 824 uint8_t ep_max; 825 uint8_t temp; 826 uint8_t do_init; 827 uint8_t alt_index; 828 829 if (iface_index != USB_IFACE_INDEX_ANY) { 830 /* parameter overload */ 831 alt_index = cmd; 832 cmd = USB_CFG_INIT; 833 } else { 834 /* not used */ 835 alt_index = 0; 836 } 837 838 err = 0; 839 840 DPRINTFN(5, "iface_index=%d cmd=%d\n", 841 iface_index, cmd); 842 843 if (cmd == USB_CFG_INIT || cmd == USB_CFG_FREE) { 844 sx_assert(&udev->enum_sx, SA_LOCKED); 845 846 /* check for in-use endpoints */ 847 848 if (cmd == USB_CFG_INIT) { 849 ep = udev->endpoints; 850 ep_max = udev->endpoints_max; 851 while (ep_max--) { 852 /* look for matching endpoints */ 853 if (iface_index == USB_IFACE_INDEX_ANY || 854 iface_index == ep->iface_index) { 855 if (ep->refcount_alloc != 0) 856 return (USB_ERR_IN_USE); 857 } 858 } 859 } 860 861 ep = udev->endpoints; 862 ep_max = udev->endpoints_max; 863 while (ep_max--) { 864 /* look for matching endpoints */ 865 if (iface_index == USB_IFACE_INDEX_ANY || 866 iface_index == ep->iface_index) { 867 /* 868 * Check if hardware needs a callback 869 * to unconfigure the endpoint. This 870 * may happen multiple times, 871 * because the requested alternate 872 * setting may fail. The callback 873 * implementation should be aware of 874 * and handle that. 875 */ 876 if (ep->edesc != NULL && 877 udev->bus->methods->endpoint_uninit != NULL) 878 udev->bus->methods->endpoint_uninit(udev, ep); 879 880 /* reset endpoint */ 881 memset(ep, 0, sizeof(*ep)); 882 /* make sure we don't zero the endpoint again */ 883 ep->iface_index = USB_IFACE_INDEX_ANY; 884 } 885 ep++; 886 } 887 888 if (cmd == USB_CFG_FREE) 889 goto cleanup; 890 } 891 892 memset(&ips, 0, sizeof(ips)); 893 894 ep_curr = 0; 895 ep_max = 0; 896 897 while ((id = usb_idesc_foreach(udev->cdesc, &ips))) { 898 iface = udev->ifaces + ips.iface_index; 899 900 /* check for specific interface match */ 901 902 if (cmd == USB_CFG_INIT) { 903 if ((iface_index != USB_IFACE_INDEX_ANY) && 904 (iface_index != ips.iface_index)) { 905 /* wrong interface */ 906 do_init = 0; 907 } else if (alt_index != ips.iface_index_alt) { 908 /* wrong alternate setting */ 909 do_init = 0; 910 } else { 911 /* initialise interface */ 912 do_init = 1; 913 } 914 /* update number of alternate settings, if any */ 915 if (iface_index == USB_IFACE_INDEX_ANY) 916 iface->num_altsetting = ips.iface_index_alt + 1; 917 } else 918 do_init = 0; 919 920 /* check for new interface */ 921 if (ips.iface_index_alt == 0) { 922 /* update current number of endpoints */ 923 ep_curr = ep_max; 924 } 925 926 /* check for init */ 927 if (do_init) { 928 /* setup the USB interface structure */ 929 iface->idesc = id; 930 /* set alternate index */ 931 iface->alt_index = alt_index; 932 /* set default interface parent */ 933 if (iface_index == USB_IFACE_INDEX_ANY) { 934 iface->parent_iface_index = 935 USB_IFACE_INDEX_ANY; 936 } 937 } 938 939 DPRINTFN(5, "found idesc nendpt=%d\n", id->bNumEndpoints); 940 941 ed = (struct usb_endpoint_descriptor *)id; 942 943 temp = ep_curr; 944 945 /* iterate all the endpoint descriptors */ 946 while ((ed = usb_edesc_foreach(udev->cdesc, ed))) { 947 /* check if endpoint limit has been reached */ 948 if (temp >= USB_MAX_EP_UNITS) { 949 DPRINTF("Endpoint limit reached\n"); 950 break; 951 } 952 953 ep = udev->endpoints + temp; 954 955 if (do_init) { 956 void *ecomp; 957 958 ecomp = usb_ed_comp_foreach(udev->cdesc, (void *)ed); 959 if (ecomp != NULL) 960 DPRINTFN(5, "Found endpoint companion descriptor\n"); 961 962 usb_init_endpoint(udev, 963 ips.iface_index, ed, ecomp, ep); 964 } 965 966 temp ++; 967 968 /* find maximum number of endpoints */ 969 if (ep_max < temp) 970 ep_max = temp; 971 } 972 } 973 974 /* NOTE: It is valid to have no interfaces and no endpoints! */ 975 976 if (cmd == USB_CFG_ALLOC) { 977 udev->ifaces_max = ips.iface_index; 978 #if (USB_HAVE_FIXED_IFACE == 0) 979 udev->ifaces = NULL; 980 if (udev->ifaces_max != 0) { 981 udev->ifaces = malloc(sizeof(*iface) * udev->ifaces_max, 982 M_USB, M_WAITOK | M_ZERO); 983 if (udev->ifaces == NULL) { 984 err = USB_ERR_NOMEM; 985 goto done; 986 } 987 } 988 #endif 989 #if (USB_HAVE_FIXED_ENDPOINT == 0) 990 if (ep_max != 0) { 991 udev->endpoints = malloc(sizeof(*ep) * ep_max, 992 M_USB, M_WAITOK | M_ZERO); 993 if (udev->endpoints == NULL) { 994 err = USB_ERR_NOMEM; 995 goto done; 996 } 997 } else { 998 udev->endpoints = NULL; 999 } 1000 #endif 1001 USB_BUS_LOCK(udev->bus); 1002 udev->endpoints_max = ep_max; 1003 /* reset any ongoing clear-stall */ 1004 udev->ep_curr = NULL; 1005 USB_BUS_UNLOCK(udev->bus); 1006 } 1007 #if (USB_HAVE_FIXED_IFACE == 0) || (USB_HAVE_FIXED_ENDPOINT == 0) 1008 done: 1009 #endif 1010 if (err) { 1011 if (cmd == USB_CFG_ALLOC) { 1012 cleanup: 1013 USB_BUS_LOCK(udev->bus); 1014 udev->endpoints_max = 0; 1015 /* reset any ongoing clear-stall */ 1016 udev->ep_curr = NULL; 1017 USB_BUS_UNLOCK(udev->bus); 1018 1019 #if (USB_HAVE_FIXED_IFACE == 0) 1020 free(udev->ifaces, M_USB); 1021 udev->ifaces = NULL; 1022 #endif 1023 #if (USB_HAVE_FIXED_ENDPOINT == 0) 1024 free(udev->endpoints, M_USB); 1025 udev->endpoints = NULL; 1026 #endif 1027 udev->ifaces_max = 0; 1028 } 1029 } 1030 return (err); 1031 } 1032 1033 /*------------------------------------------------------------------------* 1034 * usbd_set_alt_interface_index 1035 * 1036 * This function will select an alternate interface index for the 1037 * given interface index. The interface should not be in use when this 1038 * function is called. That means there should not be any open USB 1039 * transfers. Else an error is returned. If the alternate setting is 1040 * already set this function will simply return success. This function 1041 * is called in Host mode and Device mode! 1042 * 1043 * Returns: 1044 * 0: Success 1045 * Else: Failure 1046 *------------------------------------------------------------------------*/ 1047 usb_error_t 1048 usbd_set_alt_interface_index(struct usb_device *udev, 1049 uint8_t iface_index, uint8_t alt_index) 1050 { 1051 struct usb_interface *iface = usbd_get_iface(udev, iface_index); 1052 usb_error_t err; 1053 uint8_t do_unlock; 1054 1055 /* Prevent re-enumeration */ 1056 do_unlock = usbd_enum_lock(udev); 1057 1058 if (iface == NULL) { 1059 err = USB_ERR_INVAL; 1060 goto done; 1061 } 1062 if (iface->alt_index == alt_index) { 1063 /* 1064 * Optimise away duplicate setting of 1065 * alternate setting in USB Host Mode! 1066 */ 1067 err = 0; 1068 goto done; 1069 } 1070 #if USB_HAVE_UGEN 1071 /* 1072 * Free all generic FIFOs for this interface, except control 1073 * endpoint FIFOs: 1074 */ 1075 usb_fifo_free_wrap(udev, iface_index, 0); 1076 #endif 1077 1078 err = usb_config_parse(udev, iface_index, alt_index); 1079 if (err) { 1080 goto done; 1081 } 1082 if (iface->alt_index != alt_index) { 1083 /* the alternate setting does not exist */ 1084 err = USB_ERR_INVAL; 1085 goto done; 1086 } 1087 1088 err = usbd_req_set_alt_interface_no(udev, NULL, iface_index, 1089 iface->idesc->bAlternateSetting); 1090 1091 done: 1092 if (do_unlock) 1093 usbd_enum_unlock(udev); 1094 return (err); 1095 } 1096 1097 /*------------------------------------------------------------------------* 1098 * usbd_set_endpoint_stall 1099 * 1100 * This function is used to make a BULK or INTERRUPT endpoint send 1101 * STALL tokens in USB device mode. 1102 * 1103 * Returns: 1104 * 0: Success 1105 * Else: Failure 1106 *------------------------------------------------------------------------*/ 1107 usb_error_t 1108 usbd_set_endpoint_stall(struct usb_device *udev, struct usb_endpoint *ep, 1109 uint8_t do_stall) 1110 { 1111 struct usb_xfer *xfer; 1112 usb_stream_t x; 1113 uint8_t et; 1114 uint8_t was_stalled; 1115 1116 if (ep == NULL) { 1117 /* nothing to do */ 1118 DPRINTF("Cannot find endpoint\n"); 1119 /* 1120 * Pretend that the clear or set stall request is 1121 * successful else some USB host stacks can do 1122 * strange things, especially when a control endpoint 1123 * stalls. 1124 */ 1125 return (0); 1126 } 1127 et = (ep->edesc->bmAttributes & UE_XFERTYPE); 1128 1129 if ((et != UE_BULK) && 1130 (et != UE_INTERRUPT)) { 1131 /* 1132 * Should not stall control 1133 * nor isochronous endpoints. 1134 */ 1135 DPRINTF("Invalid endpoint\n"); 1136 return (0); 1137 } 1138 USB_BUS_LOCK(udev->bus); 1139 1140 /* store current stall state */ 1141 was_stalled = ep->is_stalled; 1142 1143 /* check for no change */ 1144 if (was_stalled && do_stall) { 1145 /* if the endpoint is already stalled do nothing */ 1146 USB_BUS_UNLOCK(udev->bus); 1147 DPRINTF("No change\n"); 1148 return (0); 1149 } 1150 /* set stalled state */ 1151 ep->is_stalled = 1; 1152 1153 if (do_stall || (!was_stalled)) { 1154 if (!was_stalled) { 1155 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1156 /* lookup the current USB transfer, if any */ 1157 xfer = ep->endpoint_q[x].curr; 1158 if (xfer != NULL) { 1159 /* 1160 * The "xfer_stall" method 1161 * will complete the USB 1162 * transfer like in case of a 1163 * timeout setting the error 1164 * code "USB_ERR_STALLED". 1165 */ 1166 (udev->bus->methods->xfer_stall) (xfer); 1167 } 1168 } 1169 } 1170 (udev->bus->methods->set_stall) (udev, ep, &do_stall); 1171 } 1172 if (!do_stall) { 1173 ep->toggle_next = 0; /* reset data toggle */ 1174 ep->is_stalled = 0; /* clear stalled state */ 1175 1176 (udev->bus->methods->clear_stall) (udev, ep); 1177 1178 /* start the current or next transfer, if any */ 1179 for (x = 0; x != USB_MAX_EP_STREAMS; x++) { 1180 usb_command_wrapper(&ep->endpoint_q[x], 1181 ep->endpoint_q[x].curr); 1182 } 1183 } 1184 USB_BUS_UNLOCK(udev->bus); 1185 return (0); 1186 } 1187 1188 /*------------------------------------------------------------------------* 1189 * usb_reset_iface_endpoints - used in USB device side mode 1190 *------------------------------------------------------------------------*/ 1191 usb_error_t 1192 usb_reset_iface_endpoints(struct usb_device *udev, uint8_t iface_index) 1193 { 1194 struct usb_endpoint *ep; 1195 struct usb_endpoint *ep_end; 1196 1197 ep = udev->endpoints; 1198 ep_end = udev->endpoints + udev->endpoints_max; 1199 1200 for (; ep != ep_end; ep++) { 1201 if ((ep->edesc == NULL) || 1202 (ep->iface_index != iface_index)) { 1203 continue; 1204 } 1205 /* simulate a clear stall from the peer */ 1206 usbd_set_endpoint_stall(udev, ep, 0); 1207 } 1208 return (0); 1209 } 1210 1211 /*------------------------------------------------------------------------* 1212 * usb_detach_device_sub 1213 * 1214 * This function will try to detach an USB device. If it fails a panic 1215 * will result. 1216 * 1217 * Flag values, see "USB_UNCFG_FLAG_XXX". 1218 *------------------------------------------------------------------------*/ 1219 static void 1220 usb_detach_device_sub(struct usb_device *udev, device_t *ppdev, 1221 char **ppnpinfo, uint8_t flag) 1222 { 1223 device_t dev; 1224 char *pnpinfo; 1225 int err; 1226 1227 dev = *ppdev; 1228 if (dev) { 1229 /* 1230 * NOTE: It is important to clear "*ppdev" before deleting 1231 * the child due to some device methods being called late 1232 * during the delete process ! 1233 */ 1234 *ppdev = NULL; 1235 1236 if (!rebooting) { 1237 device_printf(dev, "at %s, port %d, addr %d " 1238 "(disconnected)\n", 1239 device_get_nameunit(udev->parent_dev), 1240 udev->port_no, udev->address); 1241 } 1242 1243 if (device_is_attached(dev)) { 1244 if (udev->flags.peer_suspended) { 1245 err = DEVICE_RESUME(dev); 1246 if (err) { 1247 device_printf(dev, "Resume failed\n"); 1248 } 1249 } 1250 } 1251 /* detach and delete child */ 1252 if (device_delete_child(udev->parent_dev, dev)) { 1253 goto error; 1254 } 1255 } 1256 1257 pnpinfo = *ppnpinfo; 1258 if (pnpinfo != NULL) { 1259 *ppnpinfo = NULL; 1260 free(pnpinfo, M_USBDEV); 1261 } 1262 return; 1263 1264 error: 1265 /* Detach is not allowed to fail in the USB world */ 1266 panic("usb_detach_device_sub: A USB driver would not detach\n"); 1267 } 1268 1269 /*------------------------------------------------------------------------* 1270 * usb_detach_device 1271 * 1272 * The following function will detach the matching interfaces. 1273 * This function is NULL safe. 1274 * 1275 * Flag values, see "USB_UNCFG_FLAG_XXX". 1276 *------------------------------------------------------------------------*/ 1277 void 1278 usb_detach_device(struct usb_device *udev, uint8_t iface_index, 1279 uint8_t flag) 1280 { 1281 struct usb_interface *iface; 1282 uint8_t i; 1283 1284 if (udev == NULL) { 1285 /* nothing to do */ 1286 return; 1287 } 1288 DPRINTFN(4, "udev=%p\n", udev); 1289 1290 sx_assert(&udev->enum_sx, SA_LOCKED); 1291 1292 /* 1293 * First detach the child to give the child's detach routine a 1294 * chance to detach the sub-devices in the correct order. 1295 * Then delete the child using "device_delete_child()" which 1296 * will detach all sub-devices from the bottom and upwards! 1297 */ 1298 if (iface_index != USB_IFACE_INDEX_ANY) { 1299 i = iface_index; 1300 iface_index = i + 1; 1301 } else { 1302 i = 0; 1303 iface_index = USB_IFACE_MAX; 1304 } 1305 1306 /* do the detach */ 1307 1308 for (; i != iface_index; i++) { 1309 iface = usbd_get_iface(udev, i); 1310 if (iface == NULL) { 1311 /* looks like the end of the USB interfaces */ 1312 break; 1313 } 1314 usb_detach_device_sub(udev, &iface->subdev, 1315 &iface->pnpinfo, flag); 1316 } 1317 } 1318 1319 /*------------------------------------------------------------------------* 1320 * usb_probe_and_attach_sub 1321 * 1322 * Returns: 1323 * 0: Success 1324 * Else: Failure 1325 *------------------------------------------------------------------------*/ 1326 static uint8_t 1327 usb_probe_and_attach_sub(struct usb_device *udev, 1328 struct usb_attach_arg *uaa) 1329 { 1330 struct usb_interface *iface; 1331 device_t dev; 1332 int err; 1333 1334 iface = uaa->iface; 1335 if (iface->parent_iface_index != USB_IFACE_INDEX_ANY) { 1336 /* leave interface alone */ 1337 return (0); 1338 } 1339 dev = iface->subdev; 1340 if (dev) { 1341 /* clean up after module unload */ 1342 1343 if (device_is_attached(dev)) { 1344 /* already a device there */ 1345 return (0); 1346 } 1347 /* clear "iface->subdev" as early as possible */ 1348 1349 iface->subdev = NULL; 1350 1351 if (device_delete_child(udev->parent_dev, dev)) { 1352 /* 1353 * Panic here, else one can get a double call 1354 * to device_detach(). USB devices should 1355 * never fail on detach! 1356 */ 1357 panic("device_delete_child() failed\n"); 1358 } 1359 } 1360 if (uaa->temp_dev == NULL) { 1361 /* create a new child */ 1362 uaa->temp_dev = device_add_child(udev->parent_dev, NULL, DEVICE_UNIT_ANY); 1363 if (uaa->temp_dev == NULL) { 1364 device_printf(udev->parent_dev, 1365 "Device creation failed\n"); 1366 return (1); /* failure */ 1367 } 1368 device_set_ivars(uaa->temp_dev, uaa); 1369 device_quiet(uaa->temp_dev); 1370 } 1371 /* 1372 * Set "subdev" before probe and attach so that "devd" gets 1373 * the information it needs. 1374 */ 1375 iface->subdev = uaa->temp_dev; 1376 1377 if (device_probe_and_attach(iface->subdev) == 0) { 1378 /* 1379 * The USB attach arguments are only available during probe 1380 * and attach ! 1381 */ 1382 uaa->temp_dev = NULL; 1383 device_set_ivars(iface->subdev, NULL); 1384 1385 if (udev->flags.peer_suspended) { 1386 err = DEVICE_SUSPEND(iface->subdev); 1387 if (err) 1388 device_printf(iface->subdev, "Suspend failed\n"); 1389 } 1390 return (0); /* success */ 1391 } else { 1392 /* No USB driver found */ 1393 iface->subdev = NULL; 1394 } 1395 return (1); /* failure */ 1396 } 1397 1398 /*------------------------------------------------------------------------* 1399 * usbd_set_parent_iface 1400 * 1401 * Using this function will lock the alternate interface setting on an 1402 * interface. It is typically used for multi interface drivers. In USB 1403 * device side mode it is assumed that the alternate interfaces all 1404 * have the same endpoint descriptors. The default parent index value 1405 * is "USB_IFACE_INDEX_ANY". Then the alternate setting value is not 1406 * locked. 1407 *------------------------------------------------------------------------*/ 1408 void 1409 usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index, 1410 uint8_t parent_index) 1411 { 1412 struct usb_interface *iface; 1413 1414 if (udev == NULL || iface_index == parent_index) { 1415 /* nothing to do */ 1416 return; 1417 } 1418 iface = usbd_get_iface(udev, iface_index); 1419 if (iface != NULL) 1420 iface->parent_iface_index = parent_index; 1421 } 1422 1423 static void 1424 usb_init_attach_arg(struct usb_device *udev, 1425 struct usb_attach_arg *uaa) 1426 { 1427 memset(uaa, 0, sizeof(*uaa)); 1428 1429 uaa->device = udev; 1430 uaa->usb_mode = udev->flags.usb_mode; 1431 uaa->port = udev->port_no; 1432 uaa->dev_state = UAA_DEV_READY; 1433 1434 uaa->info.idVendor = UGETW(udev->ddesc.idVendor); 1435 uaa->info.idProduct = UGETW(udev->ddesc.idProduct); 1436 uaa->info.bcdDevice = UGETW(udev->ddesc.bcdDevice); 1437 uaa->info.bDeviceClass = udev->ddesc.bDeviceClass; 1438 uaa->info.bDeviceSubClass = udev->ddesc.bDeviceSubClass; 1439 uaa->info.bDeviceProtocol = udev->ddesc.bDeviceProtocol; 1440 uaa->info.bConfigIndex = udev->curr_config_index; 1441 uaa->info.bConfigNum = udev->curr_config_no; 1442 } 1443 1444 /*------------------------------------------------------------------------* 1445 * usb_probe_and_attach 1446 * 1447 * This function is called from "uhub_explore_sub()", 1448 * "usb_handle_set_config()" and "usb_handle_request()". 1449 * 1450 * Returns: 1451 * 0: Success 1452 * Else: A control transfer failed 1453 *------------------------------------------------------------------------*/ 1454 usb_error_t 1455 usb_probe_and_attach(struct usb_device *udev, uint8_t iface_index) 1456 { 1457 struct usb_attach_arg uaa; 1458 struct usb_interface *iface; 1459 uint8_t i; 1460 uint8_t j; 1461 uint8_t do_unlock; 1462 1463 if (udev == NULL) { 1464 DPRINTF("udev == NULL\n"); 1465 return (USB_ERR_INVAL); 1466 } 1467 /* Prevent re-enumeration */ 1468 do_unlock = usbd_enum_lock(udev); 1469 1470 if (udev->curr_config_index == USB_UNCONFIG_INDEX) { 1471 /* do nothing - no configuration has been set */ 1472 goto done; 1473 } 1474 /* setup USB attach arguments */ 1475 1476 usb_init_attach_arg(udev, &uaa); 1477 1478 /* 1479 * If the whole USB device is targeted, invoke the USB event 1480 * handler(s): 1481 */ 1482 if (iface_index == USB_IFACE_INDEX_ANY) { 1483 if (usb_test_quirk(&uaa, UQ_MSC_DYMO_EJECT) != 0 && 1484 usb_dymo_eject(udev, 0) == 0) { 1485 /* success, mark the udev as disappearing */ 1486 uaa.dev_state = UAA_DEV_EJECTING; 1487 } 1488 1489 EVENTHANDLER_INVOKE(usb_dev_configured, udev, &uaa); 1490 1491 if (uaa.dev_state != UAA_DEV_READY) { 1492 /* leave device unconfigured */ 1493 usb_unconfigure(udev, 0); 1494 goto done; 1495 } 1496 } 1497 1498 /* Check if only one interface should be probed: */ 1499 if (iface_index != USB_IFACE_INDEX_ANY) { 1500 i = iface_index; 1501 j = i + 1; 1502 } else { 1503 i = 0; 1504 j = USB_IFACE_MAX; 1505 } 1506 1507 /* Do the probe and attach */ 1508 for (; i != j; i++) { 1509 iface = usbd_get_iface(udev, i); 1510 if (iface == NULL) { 1511 /* 1512 * Looks like the end of the USB 1513 * interfaces ! 1514 */ 1515 DPRINTFN(2, "end of interfaces " 1516 "at %u\n", i); 1517 break; 1518 } 1519 if (iface->idesc == NULL) { 1520 /* no interface descriptor */ 1521 continue; 1522 } 1523 uaa.iface = iface; 1524 1525 uaa.info.bInterfaceClass = 1526 iface->idesc->bInterfaceClass; 1527 uaa.info.bInterfaceSubClass = 1528 iface->idesc->bInterfaceSubClass; 1529 uaa.info.bInterfaceProtocol = 1530 iface->idesc->bInterfaceProtocol; 1531 uaa.info.bIfaceIndex = i; 1532 uaa.info.bIfaceNum = 1533 iface->idesc->bInterfaceNumber; 1534 uaa.driver_info = 0; /* reset driver_info */ 1535 1536 DPRINTFN(2, "iclass=%u/%u/%u iindex=%u/%u\n", 1537 uaa.info.bInterfaceClass, 1538 uaa.info.bInterfaceSubClass, 1539 uaa.info.bInterfaceProtocol, 1540 uaa.info.bIfaceIndex, 1541 uaa.info.bIfaceNum); 1542 1543 usb_probe_and_attach_sub(udev, &uaa); 1544 1545 /* 1546 * Remove the leftover child, if any, to enforce that 1547 * a new nomatch devd event is generated for the next 1548 * interface if no driver is found: 1549 */ 1550 if (uaa.temp_dev == NULL) 1551 continue; 1552 if (device_delete_child(udev->parent_dev, uaa.temp_dev)) 1553 DPRINTFN(0, "device delete child failed\n"); 1554 uaa.temp_dev = NULL; 1555 } 1556 done: 1557 if (do_unlock) 1558 usbd_enum_unlock(udev); 1559 return (0); 1560 } 1561 1562 /*------------------------------------------------------------------------* 1563 * usb_suspend_resume_sub 1564 * 1565 * This function is called when the suspend or resume methods should 1566 * be executed on an USB device. 1567 *------------------------------------------------------------------------*/ 1568 static void 1569 usb_suspend_resume_sub(struct usb_device *udev, device_t dev, uint8_t do_suspend) 1570 { 1571 int err; 1572 1573 if (dev == NULL) { 1574 return; 1575 } 1576 if (!device_is_attached(dev)) { 1577 return; 1578 } 1579 if (do_suspend) { 1580 err = DEVICE_SUSPEND(dev); 1581 } else { 1582 err = DEVICE_RESUME(dev); 1583 } 1584 if (err) { 1585 device_printf(dev, "%s failed\n", 1586 do_suspend ? "Suspend" : "Resume"); 1587 } 1588 } 1589 1590 /*------------------------------------------------------------------------* 1591 * usb_suspend_resume 1592 * 1593 * The following function will suspend or resume the USB device. 1594 * 1595 * Returns: 1596 * 0: Success 1597 * Else: Failure 1598 *------------------------------------------------------------------------*/ 1599 usb_error_t 1600 usb_suspend_resume(struct usb_device *udev, uint8_t do_suspend) 1601 { 1602 struct usb_interface *iface; 1603 uint8_t i; 1604 1605 if (udev == NULL) { 1606 /* nothing to do */ 1607 return (0); 1608 } 1609 DPRINTFN(4, "udev=%p do_suspend=%d\n", udev, do_suspend); 1610 1611 sx_assert(&udev->sr_sx, SA_LOCKED); 1612 1613 USB_BUS_LOCK(udev->bus); 1614 /* filter the suspend events */ 1615 if (udev->flags.peer_suspended == do_suspend) { 1616 USB_BUS_UNLOCK(udev->bus); 1617 /* nothing to do */ 1618 return (0); 1619 } 1620 udev->flags.peer_suspended = do_suspend; 1621 USB_BUS_UNLOCK(udev->bus); 1622 1623 /* do the suspend or resume */ 1624 1625 for (i = 0; i != USB_IFACE_MAX; i++) { 1626 iface = usbd_get_iface(udev, i); 1627 if (iface == NULL) { 1628 /* looks like the end of the USB interfaces */ 1629 break; 1630 } 1631 usb_suspend_resume_sub(udev, iface->subdev, do_suspend); 1632 } 1633 return (0); 1634 } 1635 1636 /*------------------------------------------------------------------------* 1637 * usbd_clear_stall_proc 1638 * 1639 * This function performs generic USB clear stall operations. 1640 *------------------------------------------------------------------------*/ 1641 static void 1642 usbd_clear_stall_proc(struct usb_proc_msg *_pm) 1643 { 1644 struct usb_udev_msg *pm = (void *)_pm; 1645 struct usb_device *udev = pm->udev; 1646 1647 /* Change lock */ 1648 USB_BUS_UNLOCK(udev->bus); 1649 USB_MTX_LOCK(&udev->device_mtx); 1650 1651 /* Start clear stall callback */ 1652 usbd_transfer_start(udev->ctrl_xfer[1]); 1653 1654 /* Change lock */ 1655 USB_MTX_UNLOCK(&udev->device_mtx); 1656 USB_BUS_LOCK(udev->bus); 1657 } 1658 1659 /*------------------------------------------------------------------------* 1660 * usb_get_langid 1661 * 1662 * This function tries to figure out the USB string language to use. 1663 *------------------------------------------------------------------------*/ 1664 void 1665 usb_get_langid(struct usb_device *udev) 1666 { 1667 uint8_t *scratch_ptr; 1668 uint8_t do_unlock; 1669 int err; 1670 1671 /* 1672 * Workaround for buggy USB devices. 1673 * 1674 * It appears that some string-less USB chips will crash and 1675 * disappear if any attempts are made to read any string 1676 * descriptors. 1677 * 1678 * Try to detect such chips by checking the strings in the USB 1679 * device descriptor. If no strings are present there we 1680 * simply disable all USB strings. 1681 */ 1682 1683 /* Protect scratch area */ 1684 do_unlock = usbd_ctrl_lock(udev); 1685 1686 scratch_ptr = udev->scratch.data; 1687 1688 if (udev->flags.no_strings) { 1689 err = USB_ERR_INVAL; 1690 } else if (udev->ddesc.iManufacturer || 1691 udev->ddesc.iProduct || 1692 udev->ddesc.iSerialNumber) { 1693 /* read out the language ID string */ 1694 err = usbd_req_get_string_desc(udev, NULL, 1695 (char *)scratch_ptr, 4, 0, USB_LANGUAGE_TABLE); 1696 } else { 1697 err = USB_ERR_INVAL; 1698 } 1699 1700 if (err || (scratch_ptr[0] < 4)) { 1701 udev->flags.no_strings = 1; 1702 } else { 1703 uint16_t langid; 1704 uint16_t pref; 1705 uint16_t mask; 1706 uint8_t x; 1707 1708 /* load preferred value and mask */ 1709 pref = usb_lang_id; 1710 mask = usb_lang_mask; 1711 1712 /* align length correctly */ 1713 scratch_ptr[0] &= ~1U; 1714 1715 /* fix compiler warning */ 1716 langid = 0; 1717 1718 /* search for preferred language */ 1719 for (x = 2; x < scratch_ptr[0]; x += 2) { 1720 langid = UGETW(scratch_ptr + x); 1721 if ((langid & mask) == pref) 1722 break; 1723 } 1724 if (x >= scratch_ptr[0]) { 1725 /* pick the first language as the default */ 1726 DPRINTFN(1, "Using first language\n"); 1727 langid = UGETW(scratch_ptr + 2); 1728 } 1729 1730 DPRINTFN(1, "Language selected: 0x%04x\n", langid); 1731 udev->langid = langid; 1732 } 1733 1734 if (do_unlock) 1735 usbd_ctrl_unlock(udev); 1736 } 1737 1738 /*------------------------------------------------------------------------* 1739 * usb_alloc_device 1740 * 1741 * This function allocates a new USB device. This function is called 1742 * when a new device has been put in the powered state, but not yet in 1743 * the addressed state. Get initial descriptor, set the address, get 1744 * full descriptor and get strings. 1745 * 1746 * Return values: 1747 * 0: Failure 1748 * Else: Success 1749 *------------------------------------------------------------------------*/ 1750 struct usb_device * 1751 usb_alloc_device(device_t parent_dev, struct usb_bus *bus, 1752 struct usb_device *parent_hub, uint8_t depth, uint8_t port_index, 1753 uint8_t port_no, enum usb_dev_speed speed, enum usb_hc_mode mode) 1754 { 1755 struct usb_attach_arg uaa; 1756 struct usb_device *udev; 1757 struct usb_device *adev; 1758 struct usb_device *hub; 1759 usb_error_t err; 1760 uint8_t device_index; 1761 uint8_t config_index; 1762 uint8_t config_quirk; 1763 uint8_t set_config_failed; 1764 1765 DPRINTF("parent_dev=%p, bus=%p, parent_hub=%p, depth=%u, " 1766 "port_index=%u, port_no=%u, speed=%u, usb_mode=%u\n", 1767 parent_dev, bus, parent_hub, depth, port_index, port_no, 1768 speed, mode); 1769 1770 /* 1771 * Find an unused device index. In USB Host mode this is the 1772 * same as the device address. 1773 * 1774 * Device index zero is not used and device index 1 should 1775 * always be the root hub. 1776 */ 1777 for (device_index = USB_ROOT_HUB_ADDR; 1778 (device_index != bus->devices_max) && 1779 (bus->devices[device_index] != NULL); 1780 device_index++) /* nop */; 1781 1782 if (device_index == bus->devices_max) { 1783 device_printf(bus->bdev, 1784 "No free USB device index for new device\n"); 1785 return (NULL); 1786 } 1787 1788 if (depth > 0x10) { 1789 device_printf(bus->bdev, 1790 "Invalid device depth\n"); 1791 return (NULL); 1792 } 1793 udev = malloc(sizeof(*udev), M_USB, M_WAITOK | M_ZERO); 1794 #if (USB_HAVE_MALLOC_WAITOK == 0) 1795 if (udev == NULL) { 1796 return (NULL); 1797 } 1798 #endif 1799 /* initialise our SX-lock */ 1800 sx_init_flags(&udev->enum_sx, "USB config SX lock", SX_DUPOK); 1801 sx_init_flags(&udev->sr_sx, "USB suspend and resume SX lock", SX_NOWITNESS); 1802 sx_init_flags(&udev->ctrl_sx, "USB control transfer SX lock", SX_DUPOK); 1803 1804 cv_init(&udev->ctrlreq_cv, "WCTRL"); 1805 cv_init(&udev->ref_cv, "UGONE"); 1806 1807 /* initialise our mutex */ 1808 mtx_init(&udev->device_mtx, "USB device mutex", NULL, MTX_DEF); 1809 1810 /* initialise generic clear stall */ 1811 udev->cs_msg[0].hdr.pm_callback = &usbd_clear_stall_proc; 1812 udev->cs_msg[0].udev = udev; 1813 udev->cs_msg[1].hdr.pm_callback = &usbd_clear_stall_proc; 1814 udev->cs_msg[1].udev = udev; 1815 1816 /* initialise some USB device fields */ 1817 udev->parent_hub = parent_hub; 1818 udev->parent_dev = parent_dev; 1819 udev->port_index = port_index; 1820 udev->port_no = port_no; 1821 udev->depth = depth; 1822 udev->bus = bus; 1823 udev->address = USB_START_ADDR; /* default value */ 1824 udev->plugtime = (usb_ticks_t)ticks; 1825 /* 1826 * We need to force the power mode to "on" because there are plenty 1827 * of USB devices out there that do not work very well with 1828 * automatic suspend and resume! 1829 */ 1830 udev->power_mode = usbd_filter_power_mode(udev, USB_POWER_MODE_ON); 1831 udev->pwr_save.last_xfer_time = ticks; 1832 /* we are not ready yet */ 1833 udev->refcount = 1; 1834 1835 /* set up default endpoint descriptor */ 1836 udev->ctrl_ep_desc.bLength = sizeof(udev->ctrl_ep_desc); 1837 udev->ctrl_ep_desc.bDescriptorType = UDESC_ENDPOINT; 1838 udev->ctrl_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT; 1839 udev->ctrl_ep_desc.bmAttributes = UE_CONTROL; 1840 udev->ctrl_ep_desc.wMaxPacketSize[0] = USB_MAX_IPACKET; 1841 udev->ctrl_ep_desc.wMaxPacketSize[1] = 0; 1842 udev->ctrl_ep_desc.bInterval = 0; 1843 1844 /* set up default endpoint companion descriptor */ 1845 udev->ctrl_ep_comp_desc.bLength = sizeof(udev->ctrl_ep_comp_desc); 1846 udev->ctrl_ep_comp_desc.bDescriptorType = UDESC_ENDPOINT_SS_COMP; 1847 1848 udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET; 1849 1850 udev->speed = speed; 1851 udev->flags.usb_mode = mode; 1852 1853 /* search for our High Speed USB HUB, if any */ 1854 1855 adev = udev; 1856 hub = udev->parent_hub; 1857 1858 while (hub) { 1859 if (hub->speed == USB_SPEED_HIGH) { 1860 udev->hs_hub_addr = hub->address; 1861 udev->parent_hs_hub = hub; 1862 udev->hs_port_no = adev->port_no; 1863 break; 1864 } 1865 adev = hub; 1866 hub = hub->parent_hub; 1867 } 1868 1869 /* init the default endpoint */ 1870 usb_init_endpoint(udev, 0, 1871 &udev->ctrl_ep_desc, 1872 &udev->ctrl_ep_comp_desc, 1873 &udev->ctrl_ep); 1874 1875 /* set device index */ 1876 udev->device_index = device_index; 1877 1878 #if USB_HAVE_UGEN 1879 /* Create ugen name */ 1880 snprintf(udev->ugen_name, sizeof(udev->ugen_name), 1881 USB_GENERIC_NAME "%u.%u", device_get_unit(bus->bdev), 1882 device_index); 1883 LIST_INIT(&udev->pd_list); 1884 1885 /* Create the control endpoint device */ 1886 udev->ctrl_dev = usb_make_dev(udev, NULL, 0, 0, 1887 FREAD|FWRITE, UID_ROOT, GID_OPERATOR, 0600); 1888 1889 /* Create a link from /dev/ugenX.X to the default endpoint */ 1890 if (udev->ctrl_dev != NULL) 1891 make_dev_alias(udev->ctrl_dev->cdev, "%s", udev->ugen_name); 1892 #endif 1893 /* Initialise device */ 1894 if (bus->methods->device_init != NULL) { 1895 err = (bus->methods->device_init) (udev); 1896 if (err != 0) { 1897 DPRINTFN(0, "device init %d failed " 1898 "(%s, ignored)\n", device_index, 1899 usbd_errstr(err)); 1900 goto done; 1901 } 1902 } 1903 /* set powered device state after device init is complete */ 1904 usb_set_device_state(udev, USB_STATE_POWERED); 1905 1906 if (udev->flags.usb_mode == USB_MODE_HOST) { 1907 err = usbd_req_set_address(udev, NULL, device_index); 1908 1909 /* 1910 * This is the new USB device address from now on, if 1911 * the set address request didn't set it already. 1912 */ 1913 if (udev->address == USB_START_ADDR) 1914 udev->address = device_index; 1915 1916 /* 1917 * We ignore any set-address errors, hence there are 1918 * buggy USB devices out there that actually receive 1919 * the SETUP PID, but manage to set the address before 1920 * the STATUS stage is ACK'ed. If the device responds 1921 * to the subsequent get-descriptor at the new 1922 * address, then we know that the set-address command 1923 * was successful. 1924 */ 1925 if (err) { 1926 DPRINTFN(0, "set address %d failed " 1927 "(%s, ignored)\n", udev->address, 1928 usbd_errstr(err)); 1929 } 1930 } else { 1931 /* We are not self powered */ 1932 udev->flags.self_powered = 0; 1933 1934 /* Set unconfigured state */ 1935 udev->curr_config_no = USB_UNCONFIG_NO; 1936 udev->curr_config_index = USB_UNCONFIG_INDEX; 1937 1938 /* Setup USB descriptors */ 1939 err = (usb_temp_setup_by_index_p) (udev, usb_template); 1940 if (err) { 1941 DPRINTFN(0, "setting up USB template failed - " 1942 "usb_template(4) not loaded?\n"); 1943 goto done; 1944 } 1945 } 1946 usb_set_device_state(udev, USB_STATE_ADDRESSED); 1947 1948 /* setup the device descriptor and the initial "wMaxPacketSize" */ 1949 err = usbd_setup_device_desc(udev, NULL); 1950 1951 if (err != 0) { 1952 /* try to enumerate two more times */ 1953 err = usbd_req_re_enumerate(udev, NULL); 1954 if (err != 0) { 1955 err = usbd_req_re_enumerate(udev, NULL); 1956 if (err != 0) { 1957 goto done; 1958 } 1959 } 1960 } 1961 1962 /* 1963 * Setup temporary USB attach args so that we can figure out some 1964 * basic quirks for this device. 1965 */ 1966 usb_init_attach_arg(udev, &uaa); 1967 1968 if (usb_test_quirk(&uaa, UQ_BUS_POWERED)) { 1969 udev->flags.uq_bus_powered = 1; 1970 } 1971 if (usb_test_quirk(&uaa, UQ_NO_STRINGS)) { 1972 udev->flags.no_strings = 1; 1973 } 1974 1975 usb_get_langid(udev); 1976 1977 /* assume 100mA bus powered for now. Changed when configured. */ 1978 udev->power = USB_MIN_POWER; 1979 /* fetch the vendor and product strings from the device */ 1980 usb_set_device_strings(udev); 1981 1982 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 1983 /* USB device mode setup is complete */ 1984 err = 0; 1985 goto config_done; 1986 } 1987 1988 /* 1989 * Most USB devices should attach to config index 0 by 1990 * default 1991 */ 1992 if (usb_test_quirk(&uaa, UQ_CFG_INDEX_0)) { 1993 config_index = 0; 1994 config_quirk = 1; 1995 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_1)) { 1996 config_index = 1; 1997 config_quirk = 1; 1998 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_2)) { 1999 config_index = 2; 2000 config_quirk = 1; 2001 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_3)) { 2002 config_index = 3; 2003 config_quirk = 1; 2004 } else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_4)) { 2005 config_index = 4; 2006 config_quirk = 1; 2007 } else { 2008 config_index = 0; 2009 config_quirk = 0; 2010 } 2011 2012 set_config_failed = 0; 2013 repeat_set_config: 2014 2015 DPRINTF("setting config %u\n", config_index); 2016 2017 /* get the USB device configured */ 2018 err = usbd_set_config_index(udev, config_index); 2019 if (err) { 2020 if (udev->ddesc.bNumConfigurations != 0) { 2021 if (!set_config_failed) { 2022 set_config_failed = 1; 2023 /* XXX try to re-enumerate the device */ 2024 err = usbd_req_re_enumerate(udev, NULL); 2025 if (err == 0) 2026 goto repeat_set_config; 2027 } 2028 DPRINTFN(0, "Failure selecting configuration index %u:" 2029 "%s, port %u, addr %u (ignored)\n", 2030 config_index, usbd_errstr(err), udev->port_no, 2031 udev->address); 2032 } 2033 /* 2034 * Some USB devices do not have any configurations. Ignore any 2035 * set config failures! 2036 */ 2037 err = 0; 2038 goto config_done; 2039 } 2040 if (!config_quirk && config_index + 1 < udev->ddesc.bNumConfigurations) { 2041 if ((udev->cdesc->bNumInterface < 2) && 2042 usbd_get_no_descriptors(udev->cdesc, UDESC_ENDPOINT) == 0) { 2043 DPRINTFN(0, "Found no endpoints, trying next config\n"); 2044 config_index++; 2045 goto repeat_set_config; 2046 } 2047 #if USB_HAVE_MSCTEST 2048 if (config_index == 0 && 2049 usb_test_quirk(&uaa, UQ_MSC_NO_INQUIRY) == 0) { 2050 /* 2051 * Try to figure out if we have an 2052 * auto-install disk there: 2053 */ 2054 if (usb_iface_is_cdrom(udev, 0)) { 2055 DPRINTFN(0, "Found possible auto-install " 2056 "disk (trying next config)\n"); 2057 config_index++; 2058 goto repeat_set_config; 2059 } 2060 } 2061 #endif 2062 } 2063 #if USB_HAVE_MSCTEST 2064 if (set_config_failed == 0 && config_index == 0 && 2065 usb_test_quirk(&uaa, UQ_MSC_NO_START_STOP) == 0 && 2066 usb_test_quirk(&uaa, UQ_MSC_NO_PREVENT_ALLOW) == 0 && 2067 usb_test_quirk(&uaa, UQ_MSC_NO_SYNC_CACHE) == 0 && 2068 usb_test_quirk(&uaa, UQ_MSC_NO_TEST_UNIT_READY) == 0 && 2069 usb_test_quirk(&uaa, UQ_MSC_NO_GETMAXLUN) == 0 && 2070 usb_test_quirk(&uaa, UQ_MSC_NO_INQUIRY) == 0) { 2071 /* 2072 * Try to figure out if there are any MSC quirks we 2073 * should apply automatically: 2074 */ 2075 err = usb_msc_auto_quirk(udev, 0, &uaa); 2076 2077 if (err != 0) { 2078 set_config_failed = 1; 2079 goto repeat_set_config; 2080 } 2081 } 2082 #endif 2083 2084 config_done: 2085 DPRINTF("new dev (addr %d), udev=%p, parent_hub=%p\n", 2086 udev->address, udev, udev->parent_hub); 2087 2088 /* register our device - we are ready */ 2089 usb_bus_port_set_device(bus, parent_hub ? 2090 parent_hub->hub->ports + port_index : NULL, udev, device_index); 2091 2092 #if USB_HAVE_UGEN 2093 /* Symlink the ugen device name */ 2094 udev->ugen_symlink = usb_alloc_symlink(udev->ugen_name); 2095 2096 /* Announce device */ 2097 printf("%s: <%s %s> at %s\n", udev->ugen_name, 2098 usb_get_manufacturer(udev), usb_get_product(udev), 2099 device_get_nameunit(udev->bus->bdev)); 2100 #endif 2101 2102 #if USB_HAVE_DEVCTL 2103 usb_notify_addq("ATTACH", udev); 2104 #endif 2105 done: 2106 if (err) { 2107 /* 2108 * Free USB device and all subdevices, if any. 2109 */ 2110 usb_free_device(udev, 0); 2111 udev = NULL; 2112 } 2113 return (udev); 2114 } 2115 2116 #if USB_HAVE_UGEN 2117 struct usb_fs_privdata * 2118 usb_make_dev(struct usb_device *udev, const char *devname, int ep, 2119 int fi, int rwmode, uid_t uid, gid_t gid, int mode) 2120 { 2121 struct usb_fs_privdata* pd; 2122 struct make_dev_args args; 2123 char buffer[32]; 2124 2125 /* Store information to locate ourselves again later */ 2126 pd = malloc(sizeof(struct usb_fs_privdata), M_USBDEV, 2127 M_WAITOK | M_ZERO); 2128 pd->bus_index = device_get_unit(udev->bus->bdev); 2129 pd->dev_index = udev->device_index; 2130 pd->ep_addr = ep; 2131 pd->fifo_index = fi; 2132 pd->mode = rwmode; 2133 2134 /* Now, create the device itself */ 2135 if (devname == NULL) { 2136 devname = buffer; 2137 snprintf(buffer, sizeof(buffer), USB_DEVICE_DIR "/%u.%u.%u", 2138 pd->bus_index, pd->dev_index, pd->ep_addr); 2139 } 2140 2141 /* Setup arguments for make_dev_s() */ 2142 make_dev_args_init(&args); 2143 args.mda_devsw = &usb_devsw; 2144 args.mda_uid = uid; 2145 args.mda_gid = gid; 2146 args.mda_mode = mode; 2147 args.mda_si_drv1 = pd; 2148 2149 if (make_dev_s(&args, &pd->cdev, "%s", devname) != 0) { 2150 DPRINTFN(0, "Failed to create device %s\n", devname); 2151 free(pd, M_USBDEV); 2152 return (NULL); 2153 } 2154 return (pd); 2155 } 2156 2157 void 2158 usb_destroy_dev_sync(struct usb_fs_privdata *pd) 2159 { 2160 DPRINTFN(1, "Destroying device at ugen%d.%d\n", 2161 pd->bus_index, pd->dev_index); 2162 2163 /* 2164 * Destroy character device synchronously. After this 2165 * all system calls are returned. Can block. 2166 */ 2167 destroy_dev(pd->cdev); 2168 2169 free(pd, M_USBDEV); 2170 } 2171 2172 void 2173 usb_destroy_dev(struct usb_fs_privdata *pd) 2174 { 2175 struct usb_bus *bus; 2176 2177 if (pd == NULL) 2178 return; 2179 2180 mtx_lock(&usb_ref_lock); 2181 bus = devclass_get_softc(usb_devclass_ptr, pd->bus_index); 2182 mtx_unlock(&usb_ref_lock); 2183 2184 if (bus == NULL) { 2185 usb_destroy_dev_sync(pd); 2186 return; 2187 } 2188 2189 /* make sure we can re-use the device name */ 2190 delist_dev(pd->cdev); 2191 2192 USB_BUS_LOCK(bus); 2193 LIST_INSERT_HEAD(&bus->pd_cleanup_list, pd, pd_next); 2194 /* get cleanup going */ 2195 usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus), 2196 &bus->cleanup_msg[0], &bus->cleanup_msg[1]); 2197 USB_BUS_UNLOCK(bus); 2198 } 2199 2200 static void 2201 usb_cdev_create(struct usb_device *udev) 2202 { 2203 struct usb_config_descriptor *cd; 2204 struct usb_endpoint_descriptor *ed; 2205 struct usb_descriptor *desc; 2206 struct usb_fs_privdata* pd; 2207 int inmode, outmode, inmask, outmask, mode; 2208 uint8_t ep; 2209 2210 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("stale cdev entries")); 2211 2212 DPRINTFN(2, "Creating device nodes\n"); 2213 2214 if (usbd_get_mode(udev) == USB_MODE_DEVICE) { 2215 inmode = FWRITE; 2216 outmode = FREAD; 2217 } else { /* USB_MODE_HOST */ 2218 inmode = FREAD; 2219 outmode = FWRITE; 2220 } 2221 2222 inmask = 0; 2223 outmask = 0; 2224 desc = NULL; 2225 2226 /* 2227 * Collect all used endpoint numbers instead of just 2228 * generating 16 static endpoints. 2229 */ 2230 cd = usbd_get_config_descriptor(udev); 2231 while ((desc = usb_desc_foreach(cd, desc))) { 2232 /* filter out all endpoint descriptors */ 2233 if ((desc->bDescriptorType == UDESC_ENDPOINT) && 2234 (desc->bLength >= sizeof(*ed))) { 2235 ed = (struct usb_endpoint_descriptor *)desc; 2236 2237 /* update masks */ 2238 ep = ed->bEndpointAddress; 2239 if (UE_GET_DIR(ep) == UE_DIR_OUT) 2240 outmask |= 1 << UE_GET_ADDR(ep); 2241 else 2242 inmask |= 1 << UE_GET_ADDR(ep); 2243 } 2244 } 2245 2246 /* Create all available endpoints except EP0 */ 2247 for (ep = 1; ep < 16; ep++) { 2248 mode = (inmask & (1 << ep)) ? inmode : 0; 2249 mode |= (outmask & (1 << ep)) ? outmode : 0; 2250 if (mode == 0) 2251 continue; /* no IN or OUT endpoint */ 2252 2253 pd = usb_make_dev(udev, NULL, ep, 0, 2254 mode, UID_ROOT, GID_OPERATOR, 0600); 2255 2256 if (pd != NULL) 2257 LIST_INSERT_HEAD(&udev->pd_list, pd, pd_next); 2258 } 2259 } 2260 2261 static void 2262 usb_cdev_free(struct usb_device *udev) 2263 { 2264 struct usb_fs_privdata* pd; 2265 2266 DPRINTFN(2, "Freeing device nodes\n"); 2267 2268 while ((pd = LIST_FIRST(&udev->pd_list)) != NULL) { 2269 KASSERT(pd->cdev->si_drv1 == pd, ("privdata corrupt")); 2270 2271 LIST_REMOVE(pd, pd_next); 2272 2273 usb_destroy_dev(pd); 2274 } 2275 } 2276 #endif 2277 2278 /*------------------------------------------------------------------------* 2279 * usb_free_device 2280 * 2281 * This function is NULL safe and will free an USB device and its 2282 * children devices, if any. 2283 * 2284 * Flag values: Reserved, set to zero. 2285 *------------------------------------------------------------------------*/ 2286 void 2287 usb_free_device(struct usb_device *udev, uint8_t flag) 2288 { 2289 struct usb_bus *bus; 2290 2291 if (udev == NULL) 2292 return; /* already freed */ 2293 2294 DPRINTFN(4, "udev=%p port=%d\n", udev, udev->port_no); 2295 2296 bus = udev->bus; 2297 2298 /* set DETACHED state to prevent any further references */ 2299 usb_set_device_state(udev, USB_STATE_DETACHED); 2300 2301 #if USB_HAVE_DEVCTL 2302 usb_notify_addq("DETACH", udev); 2303 #endif 2304 2305 #if USB_HAVE_UGEN 2306 if (!rebooting) { 2307 printf("%s: <%s %s> at %s (disconnected)\n", udev->ugen_name, 2308 usb_get_manufacturer(udev), usb_get_product(udev), 2309 device_get_nameunit(bus->bdev)); 2310 } 2311 2312 /* Destroy UGEN symlink, if any */ 2313 if (udev->ugen_symlink) { 2314 usb_free_symlink(udev->ugen_symlink); 2315 udev->ugen_symlink = NULL; 2316 } 2317 2318 usb_destroy_dev(udev->ctrl_dev); 2319 #endif 2320 2321 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2322 /* stop receiving any control transfers (Device Side Mode) */ 2323 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2324 } 2325 2326 /* the following will get the device unconfigured in software */ 2327 usb_unconfigure(udev, USB_UNCFG_FLAG_FREE_EP0); 2328 2329 /* final device unregister after all character devices are closed */ 2330 usb_bus_port_set_device(bus, udev->parent_hub ? 2331 udev->parent_hub->hub->ports + udev->port_index : NULL, 2332 NULL, USB_ROOT_HUB_ADDR); 2333 2334 /* unsetup any leftover default USB transfers */ 2335 usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX); 2336 2337 /* template unsetup, if any */ 2338 (usb_temp_unsetup_p) (udev); 2339 2340 /* 2341 * Make sure that our clear-stall messages are not queued 2342 * anywhere: 2343 */ 2344 USB_BUS_LOCK(udev->bus); 2345 usb_proc_mwait(USB_BUS_CS_PROC(udev->bus), 2346 &udev->cs_msg[0], &udev->cs_msg[1]); 2347 USB_BUS_UNLOCK(udev->bus); 2348 2349 /* wait for all references to go away */ 2350 usb_wait_pending_refs(udev); 2351 2352 sx_destroy(&udev->enum_sx); 2353 sx_destroy(&udev->sr_sx); 2354 sx_destroy(&udev->ctrl_sx); 2355 2356 cv_destroy(&udev->ctrlreq_cv); 2357 cv_destroy(&udev->ref_cv); 2358 2359 mtx_destroy(&udev->device_mtx); 2360 #if USB_HAVE_UGEN 2361 KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("leaked cdev entries")); 2362 #endif 2363 2364 /* Uninitialise device */ 2365 if (bus->methods->device_uninit != NULL) 2366 (bus->methods->device_uninit) (udev); 2367 2368 /* free device */ 2369 free(udev->serial, M_USB); 2370 free(udev->manufacturer, M_USB); 2371 free(udev->product, M_USB); 2372 free(udev, M_USB); 2373 } 2374 2375 /*------------------------------------------------------------------------* 2376 * usbd_get_iface 2377 * 2378 * This function is the safe way to get the USB interface structure 2379 * pointer by interface index. 2380 * 2381 * Return values: 2382 * NULL: Interface not present. 2383 * Else: Pointer to USB interface structure. 2384 *------------------------------------------------------------------------*/ 2385 struct usb_interface * 2386 usbd_get_iface(struct usb_device *udev, uint8_t iface_index) 2387 { 2388 struct usb_interface *iface = udev->ifaces + iface_index; 2389 2390 if (iface_index >= udev->ifaces_max) 2391 return (NULL); 2392 return (iface); 2393 } 2394 2395 /*------------------------------------------------------------------------* 2396 * usbd_find_descriptor 2397 * 2398 * This function will lookup the first descriptor that matches the 2399 * criteria given by the arguments "type" and "subtype". Descriptors 2400 * will only be searched within the interface having the index 2401 * "iface_index". If the "id" argument points to an USB descriptor, 2402 * it will be skipped before the search is started. This allows 2403 * searching for multiple descriptors using the same criteria. Else 2404 * the search is started after the interface descriptor. 2405 * 2406 * Return values: 2407 * NULL: End of descriptors 2408 * Else: A descriptor matching the criteria 2409 *------------------------------------------------------------------------*/ 2410 void * 2411 usbd_find_descriptor(struct usb_device *udev, void *id, uint8_t iface_index, 2412 uint8_t type, uint8_t type_mask, 2413 uint8_t subtype, uint8_t subtype_mask) 2414 { 2415 struct usb_descriptor *desc; 2416 struct usb_config_descriptor *cd; 2417 struct usb_interface *iface; 2418 2419 cd = usbd_get_config_descriptor(udev); 2420 if (cd == NULL) { 2421 return (NULL); 2422 } 2423 if (id == NULL) { 2424 iface = usbd_get_iface(udev, iface_index); 2425 if (iface == NULL) { 2426 return (NULL); 2427 } 2428 id = usbd_get_interface_descriptor(iface); 2429 if (id == NULL) { 2430 return (NULL); 2431 } 2432 } 2433 desc = (void *)id; 2434 2435 while ((desc = usb_desc_foreach(cd, desc))) { 2436 if (desc->bDescriptorType == UDESC_INTERFACE) { 2437 break; 2438 } 2439 if (((desc->bDescriptorType & type_mask) == type) && 2440 ((desc->bDescriptorSubtype & subtype_mask) == subtype)) { 2441 return (desc); 2442 } 2443 } 2444 return (NULL); 2445 } 2446 2447 /*------------------------------------------------------------------------* 2448 * usb_devinfo 2449 * 2450 * This function will dump information from the device descriptor 2451 * belonging to the USB device pointed to by "udev", to the string 2452 * pointed to by "dst_ptr" having a maximum length of "dst_len" bytes 2453 * including the terminating zero. 2454 *------------------------------------------------------------------------*/ 2455 void 2456 usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len) 2457 { 2458 struct usb_device_descriptor *udd = &udev->ddesc; 2459 uint16_t bcdDevice; 2460 uint16_t bcdUSB; 2461 2462 bcdUSB = UGETW(udd->bcdUSB); 2463 bcdDevice = UGETW(udd->bcdDevice); 2464 2465 if (udd->bDeviceClass != 0xFF) { 2466 snprintf(dst_ptr, dst_len, "%s %s, class %d/%d, rev %x.%02x/" 2467 "%x.%02x, addr %d", 2468 usb_get_manufacturer(udev), 2469 usb_get_product(udev), 2470 udd->bDeviceClass, udd->bDeviceSubClass, 2471 (bcdUSB >> 8), bcdUSB & 0xFF, 2472 (bcdDevice >> 8), bcdDevice & 0xFF, 2473 udev->address); 2474 } else { 2475 snprintf(dst_ptr, dst_len, "%s %s, rev %x.%02x/" 2476 "%x.%02x, addr %d", 2477 usb_get_manufacturer(udev), 2478 usb_get_product(udev), 2479 (bcdUSB >> 8), bcdUSB & 0xFF, 2480 (bcdDevice >> 8), bcdDevice & 0xFF, 2481 udev->address); 2482 } 2483 } 2484 2485 #ifdef USB_VERBOSE 2486 /* 2487 * Descriptions of known vendors and devices ("products"). 2488 */ 2489 struct usb_knowndev { 2490 uint16_t vendor; 2491 uint16_t product; 2492 uint32_t flags; 2493 const char *vendorname; 2494 const char *productname; 2495 }; 2496 2497 #define USB_KNOWNDEV_NOPROD 0x01 /* match on vendor only */ 2498 2499 #include "usbdevs.h" 2500 #include "usbdevs_data.h" 2501 #endif /* USB_VERBOSE */ 2502 2503 void 2504 usb_set_device_strings(struct usb_device *udev) 2505 { 2506 struct usb_device_descriptor *udd = &udev->ddesc; 2507 #ifdef USB_VERBOSE 2508 const struct usb_knowndev *kdp; 2509 #endif 2510 char *temp_ptr; 2511 size_t temp_size; 2512 uint16_t vendor_id; 2513 uint16_t product_id; 2514 uint8_t do_unlock; 2515 2516 /* Protect scratch area */ 2517 do_unlock = usbd_ctrl_lock(udev); 2518 2519 temp_ptr = (char *)udev->scratch.data; 2520 temp_size = sizeof(udev->scratch.data); 2521 2522 vendor_id = UGETW(udd->idVendor); 2523 product_id = UGETW(udd->idProduct); 2524 2525 /* cleanup old strings, if any */ 2526 free(udev->serial, M_USB); 2527 free(udev->manufacturer, M_USB); 2528 free(udev->product, M_USB); 2529 2530 /* zero the string pointers */ 2531 udev->serial = NULL; 2532 udev->manufacturer = NULL; 2533 udev->product = NULL; 2534 2535 /* get serial number string */ 2536 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2537 udev->ddesc.iSerialNumber); 2538 udev->serial = strdup(temp_ptr, M_USB); 2539 2540 /* get manufacturer string */ 2541 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2542 udev->ddesc.iManufacturer); 2543 usb_trim_spaces(temp_ptr); 2544 if (temp_ptr[0] != '\0') 2545 udev->manufacturer = strdup(temp_ptr, M_USB); 2546 2547 /* get product string */ 2548 usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size, 2549 udev->ddesc.iProduct); 2550 usb_trim_spaces(temp_ptr); 2551 if (temp_ptr[0] != '\0') 2552 udev->product = strdup(temp_ptr, M_USB); 2553 2554 #ifdef USB_VERBOSE 2555 if (udev->manufacturer == NULL || udev->product == NULL) { 2556 for (kdp = usb_knowndevs; kdp->vendorname != NULL; kdp++) { 2557 if (kdp->vendor == vendor_id && 2558 (kdp->product == product_id || 2559 (kdp->flags & USB_KNOWNDEV_NOPROD) != 0)) 2560 break; 2561 } 2562 if (kdp->vendorname != NULL) { 2563 /* XXX should use pointer to knowndevs string */ 2564 if (udev->manufacturer == NULL) { 2565 udev->manufacturer = strdup(kdp->vendorname, 2566 M_USB); 2567 } 2568 if (udev->product == NULL && 2569 (kdp->flags & USB_KNOWNDEV_NOPROD) == 0) { 2570 udev->product = strdup(kdp->productname, 2571 M_USB); 2572 } 2573 } 2574 } 2575 #endif 2576 /* Provide default strings if none were found */ 2577 if (udev->manufacturer == NULL) { 2578 snprintf(temp_ptr, temp_size, "vendor 0x%04x", vendor_id); 2579 udev->manufacturer = strdup(temp_ptr, M_USB); 2580 } 2581 if (udev->product == NULL) { 2582 snprintf(temp_ptr, temp_size, "product 0x%04x", product_id); 2583 udev->product = strdup(temp_ptr, M_USB); 2584 } 2585 2586 if (do_unlock) 2587 usbd_ctrl_unlock(udev); 2588 } 2589 2590 /* 2591 * Returns: 2592 * See: USB_MODE_XXX 2593 */ 2594 enum usb_hc_mode 2595 usbd_get_mode(struct usb_device *udev) 2596 { 2597 return (udev->flags.usb_mode); 2598 } 2599 2600 /* 2601 * Returns: 2602 * See: USB_SPEED_XXX 2603 */ 2604 enum usb_dev_speed 2605 usbd_get_speed(struct usb_device *udev) 2606 { 2607 return (udev->speed); 2608 } 2609 2610 uint32_t 2611 usbd_get_isoc_fps(struct usb_device *udev) 2612 { 2613 ; /* indent fix */ 2614 switch (udev->speed) { 2615 case USB_SPEED_LOW: 2616 case USB_SPEED_FULL: 2617 return (1000); 2618 default: 2619 return (8000); 2620 } 2621 } 2622 2623 struct usb_device_descriptor * 2624 usbd_get_device_descriptor(struct usb_device *udev) 2625 { 2626 if (udev == NULL) 2627 return (NULL); /* be NULL safe */ 2628 return (&udev->ddesc); 2629 } 2630 2631 struct usb_config_descriptor * 2632 usbd_get_config_descriptor(struct usb_device *udev) 2633 { 2634 if (udev == NULL) 2635 return (NULL); /* be NULL safe */ 2636 return (udev->cdesc); 2637 } 2638 2639 /*------------------------------------------------------------------------* 2640 * usb_test_quirk - test a device for a given quirk 2641 * 2642 * Return values: 2643 * 0: The USB device does not have the given quirk. 2644 * Else: The USB device has the given quirk. 2645 *------------------------------------------------------------------------*/ 2646 uint8_t 2647 usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk) 2648 { 2649 uint8_t found; 2650 uint8_t x; 2651 2652 if (quirk == UQ_NONE) 2653 return (0); 2654 2655 /* search the automatic per device quirks first */ 2656 2657 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 2658 if (uaa->device->autoQuirk[x] == quirk) 2659 return (1); 2660 } 2661 2662 /* search global quirk table, if any */ 2663 2664 found = (usb_test_quirk_p) (&uaa->info, quirk); 2665 2666 return (found); 2667 } 2668 2669 struct usb_interface_descriptor * 2670 usbd_get_interface_descriptor(struct usb_interface *iface) 2671 { 2672 if (iface == NULL) 2673 return (NULL); /* be NULL safe */ 2674 return (iface->idesc); 2675 } 2676 2677 uint8_t 2678 usbd_get_interface_altindex(struct usb_interface *iface) 2679 { 2680 return (iface->alt_index); 2681 } 2682 2683 uint8_t 2684 usbd_get_bus_index(struct usb_device *udev) 2685 { 2686 return ((uint8_t)device_get_unit(udev->bus->bdev)); 2687 } 2688 2689 uint8_t 2690 usbd_get_device_index(struct usb_device *udev) 2691 { 2692 return (udev->device_index); 2693 } 2694 2695 #if USB_HAVE_DEVCTL 2696 static void 2697 usb_notify_addq(const char *type, struct usb_device *udev) 2698 { 2699 struct usb_interface *iface; 2700 struct sbuf *sb; 2701 int i; 2702 2703 /* announce the device */ 2704 sb = sbuf_new_auto(); 2705 sbuf_printf(sb, 2706 #if USB_HAVE_UGEN 2707 "ugen=%s " 2708 "cdev=%s " 2709 #endif 2710 "vendor=0x%04x " 2711 "product=0x%04x " 2712 "devclass=0x%02x " 2713 "devsubclass=0x%02x " 2714 "sernum=\"%s\" " 2715 "release=0x%04x " 2716 "mode=%s " 2717 "port=%u " 2718 #if USB_HAVE_UGEN 2719 "parent=%s" 2720 #endif 2721 "", 2722 #if USB_HAVE_UGEN 2723 udev->ugen_name, 2724 udev->ugen_name, 2725 #endif 2726 UGETW(udev->ddesc.idVendor), 2727 UGETW(udev->ddesc.idProduct), 2728 udev->ddesc.bDeviceClass, 2729 udev->ddesc.bDeviceSubClass, 2730 usb_get_serial(udev), 2731 UGETW(udev->ddesc.bcdDevice), 2732 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2733 udev->port_no 2734 #if USB_HAVE_UGEN 2735 , udev->parent_hub != NULL ? 2736 udev->parent_hub->ugen_name : 2737 device_get_nameunit(device_get_parent(udev->bus->bdev)) 2738 #endif 2739 ); 2740 sbuf_finish(sb); 2741 devctl_notify("USB", "DEVICE", type, sbuf_data(sb)); 2742 sbuf_delete(sb); 2743 2744 /* announce each interface */ 2745 for (i = 0; i < USB_IFACE_MAX; i++) { 2746 iface = usbd_get_iface(udev, i); 2747 if (iface == NULL) 2748 break; /* end of interfaces */ 2749 if (iface->idesc == NULL) 2750 continue; /* no interface descriptor */ 2751 2752 sb = sbuf_new_auto(); 2753 sbuf_printf(sb, 2754 #if USB_HAVE_UGEN 2755 "ugen=%s " 2756 "cdev=%s " 2757 #endif 2758 "vendor=0x%04x " 2759 "product=0x%04x " 2760 "devclass=0x%02x " 2761 "devsubclass=0x%02x " 2762 "sernum=\"%s\" " 2763 "release=0x%04x " 2764 "mode=%s " 2765 "interface=%d " 2766 "endpoints=%d " 2767 "intclass=0x%02x " 2768 "intsubclass=0x%02x " 2769 "intprotocol=0x%02x", 2770 #if USB_HAVE_UGEN 2771 udev->ugen_name, 2772 udev->ugen_name, 2773 #endif 2774 UGETW(udev->ddesc.idVendor), 2775 UGETW(udev->ddesc.idProduct), 2776 udev->ddesc.bDeviceClass, 2777 udev->ddesc.bDeviceSubClass, 2778 usb_get_serial(udev), 2779 UGETW(udev->ddesc.bcdDevice), 2780 (udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 2781 iface->idesc->bInterfaceNumber, 2782 iface->idesc->bNumEndpoints, 2783 iface->idesc->bInterfaceClass, 2784 iface->idesc->bInterfaceSubClass, 2785 iface->idesc->bInterfaceProtocol); 2786 sbuf_finish(sb); 2787 devctl_notify("USB", "INTERFACE", type, sbuf_data(sb)); 2788 sbuf_delete(sb); 2789 } 2790 } 2791 #endif 2792 2793 #if USB_HAVE_UGEN 2794 /*------------------------------------------------------------------------* 2795 * usb_fifo_free_wrap 2796 * 2797 * This function will free the FIFOs. 2798 * 2799 * Description of "flag" argument: If the USB_UNCFG_FLAG_FREE_EP0 flag 2800 * is set and "iface_index" is set to "USB_IFACE_INDEX_ANY", we free 2801 * all FIFOs. If the USB_UNCFG_FLAG_FREE_EP0 flag is not set and 2802 * "iface_index" is set to "USB_IFACE_INDEX_ANY", we free all non 2803 * control endpoint FIFOs. If "iface_index" is not set to 2804 * "USB_IFACE_INDEX_ANY" the flag has no effect. 2805 *------------------------------------------------------------------------*/ 2806 static void 2807 usb_fifo_free_wrap(struct usb_device *udev, 2808 uint8_t iface_index, uint8_t flag) 2809 { 2810 struct usb_fifo *f; 2811 uint16_t i; 2812 2813 /* 2814 * Free any USB FIFOs on the given interface: 2815 */ 2816 for (i = 0; i != USB_FIFO_MAX; i++) { 2817 f = udev->fifo[i]; 2818 if (f == NULL) { 2819 continue; 2820 } 2821 /* Check if the interface index matches */ 2822 if (iface_index == f->iface_index) { 2823 if (f->methods != &usb_ugen_methods) { 2824 /* 2825 * Don't free any non-generic FIFOs in 2826 * this case. 2827 */ 2828 continue; 2829 } 2830 if ((f->dev_ep_index == 0) && 2831 (f->fs_ep_max == 0)) { 2832 /* no need to free this FIFO */ 2833 continue; 2834 } 2835 } else if (iface_index == USB_IFACE_INDEX_ANY) { 2836 if ((f->methods == &usb_ugen_methods) && 2837 (f->dev_ep_index == 0) && 2838 (!(flag & USB_UNCFG_FLAG_FREE_EP0)) && 2839 (f->fs_ep_max == 0)) { 2840 /* no need to free this FIFO */ 2841 continue; 2842 } 2843 } else { 2844 /* no need to free this FIFO */ 2845 continue; 2846 } 2847 /* free this FIFO */ 2848 usb_fifo_free(f); 2849 } 2850 } 2851 #endif 2852 2853 /*------------------------------------------------------------------------* 2854 * usb_peer_can_wakeup 2855 * 2856 * Return values: 2857 * 0: Peer cannot do resume signalling. 2858 * Else: Peer can do resume signalling. 2859 *------------------------------------------------------------------------*/ 2860 uint8_t 2861 usb_peer_can_wakeup(struct usb_device *udev) 2862 { 2863 const struct usb_config_descriptor *cdp; 2864 2865 cdp = udev->cdesc; 2866 if ((cdp != NULL) && (udev->flags.usb_mode == USB_MODE_HOST)) { 2867 return (cdp->bmAttributes & UC_REMOTE_WAKEUP); 2868 } 2869 return (0); /* not supported */ 2870 } 2871 2872 void 2873 usb_set_device_state(struct usb_device *udev, enum usb_dev_state state) 2874 { 2875 2876 KASSERT(state < USB_STATE_MAX, ("invalid udev state")); 2877 2878 DPRINTF("udev %p state %s -> %s\n", udev, 2879 usb_statestr(udev->state), usb_statestr(state)); 2880 2881 #if USB_HAVE_UGEN 2882 mtx_lock(&usb_ref_lock); 2883 #endif 2884 udev->state = state; 2885 #if USB_HAVE_UGEN 2886 mtx_unlock(&usb_ref_lock); 2887 #endif 2888 if (udev->bus->methods->device_state_change != NULL) 2889 (udev->bus->methods->device_state_change) (udev); 2890 } 2891 2892 enum usb_dev_state 2893 usb_get_device_state(struct usb_device *udev) 2894 { 2895 if (udev == NULL) 2896 return (USB_STATE_DETACHED); 2897 return (udev->state); 2898 } 2899 2900 uint8_t 2901 usbd_device_attached(struct usb_device *udev) 2902 { 2903 return (udev->state > USB_STATE_DETACHED); 2904 } 2905 2906 /* 2907 * The following function locks enumerating the given USB device. If 2908 * the lock is already grabbed this function returns zero. Else a 2909 * a value of one is returned. 2910 */ 2911 uint8_t 2912 usbd_enum_lock(struct usb_device *udev) 2913 { 2914 if (sx_xlocked(&udev->enum_sx)) 2915 return (0); 2916 2917 sx_xlock(&udev->enum_sx); 2918 sx_xlock(&udev->sr_sx); 2919 /* 2920 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2921 * are locked before locking Giant. Else the lock can be 2922 * locked multiple times. 2923 */ 2924 bus_topo_lock(); 2925 return (1); 2926 } 2927 2928 #if USB_HAVE_UGEN 2929 /* 2930 * This function is the same like usbd_enum_lock() except a value of 2931 * 255 is returned when a signal is pending: 2932 */ 2933 uint8_t 2934 usbd_enum_lock_sig(struct usb_device *udev) 2935 { 2936 if (sx_xlocked(&udev->enum_sx)) 2937 return (0); 2938 if (sx_xlock_sig(&udev->enum_sx)) 2939 return (255); 2940 if (sx_xlock_sig(&udev->sr_sx)) { 2941 sx_xunlock(&udev->enum_sx); 2942 return (255); 2943 } 2944 bus_topo_lock(); 2945 return (1); 2946 } 2947 #endif 2948 2949 /* The following function unlocks enumerating the given USB device. */ 2950 2951 void 2952 usbd_enum_unlock(struct usb_device *udev) 2953 { 2954 bus_topo_unlock(); 2955 sx_xunlock(&udev->enum_sx); 2956 sx_xunlock(&udev->sr_sx); 2957 } 2958 2959 /* The following function locks suspend and resume. */ 2960 2961 void 2962 usbd_sr_lock(struct usb_device *udev) 2963 { 2964 sx_xlock(&udev->sr_sx); 2965 /* 2966 * NEWBUS LOCK NOTE: We should check if any parent SX locks 2967 * are locked before locking Giant. Else the lock can be 2968 * locked multiple times. 2969 */ 2970 bus_topo_lock(); 2971 } 2972 2973 /* The following function unlocks suspend and resume. */ 2974 2975 void 2976 usbd_sr_unlock(struct usb_device *udev) 2977 { 2978 bus_topo_unlock(); 2979 sx_xunlock(&udev->sr_sx); 2980 } 2981 2982 /* 2983 * The following function checks the enumerating lock for the given 2984 * USB device. 2985 */ 2986 2987 uint8_t 2988 usbd_enum_is_locked(struct usb_device *udev) 2989 { 2990 return (sx_xlocked(&udev->enum_sx)); 2991 } 2992 2993 /* 2994 * The following function is used to serialize access to USB control 2995 * transfers and the USB scratch area. If the lock is already grabbed 2996 * this function returns zero. Else a value of one is returned. 2997 */ 2998 uint8_t 2999 usbd_ctrl_lock(struct usb_device *udev) 3000 { 3001 if (sx_xlocked(&udev->ctrl_sx)) 3002 return (0); 3003 sx_xlock(&udev->ctrl_sx); 3004 3005 /* 3006 * We need to allow suspend and resume at this point, else the 3007 * control transfer will timeout if the device is suspended! 3008 */ 3009 if (usbd_enum_is_locked(udev)) 3010 usbd_sr_unlock(udev); 3011 return (1); 3012 } 3013 3014 void 3015 usbd_ctrl_unlock(struct usb_device *udev) 3016 { 3017 sx_xunlock(&udev->ctrl_sx); 3018 3019 /* 3020 * Restore the suspend and resume lock after we have unlocked 3021 * the USB control transfer lock to avoid LOR: 3022 */ 3023 if (usbd_enum_is_locked(udev)) 3024 usbd_sr_lock(udev); 3025 } 3026 3027 /* 3028 * The following function is used to set the per-interface specific 3029 * plug and play information. The string referred to by the pnpinfo 3030 * argument can safely be freed after calling this function. The 3031 * pnpinfo of an interface will be reset at device detach or when 3032 * passing a NULL argument to this function. This function 3033 * returns zero on success, else a USB_ERR_XXX failure code. 3034 */ 3035 3036 usb_error_t 3037 usbd_set_pnpinfo(struct usb_device *udev, uint8_t iface_index, const char *pnpinfo) 3038 { 3039 struct usb_interface *iface; 3040 3041 iface = usbd_get_iface(udev, iface_index); 3042 if (iface == NULL) 3043 return (USB_ERR_INVAL); 3044 3045 if (iface->pnpinfo != NULL) { 3046 free(iface->pnpinfo, M_USBDEV); 3047 iface->pnpinfo = NULL; 3048 } 3049 3050 if (pnpinfo == NULL || pnpinfo[0] == 0) 3051 return (0); /* success */ 3052 3053 iface->pnpinfo = strdup(pnpinfo, M_USBDEV); 3054 if (iface->pnpinfo == NULL) 3055 return (USB_ERR_NOMEM); 3056 3057 return (0); /* success */ 3058 } 3059 3060 usb_error_t 3061 usbd_add_dynamic_quirk(struct usb_device *udev, uint16_t quirk) 3062 { 3063 uint8_t x; 3064 3065 for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) { 3066 if (udev->autoQuirk[x] == 0 || 3067 udev->autoQuirk[x] == quirk) { 3068 udev->autoQuirk[x] = quirk; 3069 return (0); /* success */ 3070 } 3071 } 3072 return (USB_ERR_NOMEM); 3073 } 3074 3075 /* 3076 * The following function is used to select the endpoint mode. It 3077 * should not be called outside enumeration context. 3078 */ 3079 3080 usb_error_t 3081 usbd_set_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep, 3082 uint8_t ep_mode) 3083 { 3084 usb_error_t error; 3085 uint8_t do_unlock; 3086 3087 /* Prevent re-enumeration */ 3088 do_unlock = usbd_enum_lock(udev); 3089 3090 if (udev->bus->methods->set_endpoint_mode != NULL) { 3091 error = (udev->bus->methods->set_endpoint_mode) ( 3092 udev, ep, ep_mode); 3093 } else if (ep_mode != USB_EP_MODE_DEFAULT) { 3094 error = USB_ERR_INVAL; 3095 } else { 3096 error = 0; 3097 } 3098 3099 /* only set new mode regardless of error */ 3100 ep->ep_mode = ep_mode; 3101 3102 if (do_unlock) 3103 usbd_enum_unlock(udev); 3104 return (error); 3105 } 3106 3107 uint8_t 3108 usbd_get_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep) 3109 { 3110 return (ep->ep_mode); 3111 } 3112