1 /* $FreeBSD$ */ 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause 4 * 5 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #ifndef _USB_CONTROLLER_H_ 30 #define _USB_CONTROLLER_H_ 31 32 /* defines */ 33 34 #define USB_BUS_DMA_TAG_MAX 8 35 36 /* structure prototypes */ 37 38 struct usb_bus; 39 struct usb_page; 40 struct usb_endpoint; 41 struct usb_page_cache; 42 struct usb_setup_params; 43 struct usb_hw_ep_profile; 44 struct usb_fs_isoc_schedule; 45 struct usb_endpoint_descriptor; 46 47 /* typedefs */ 48 49 typedef void (usb_bus_mem_sub_cb_t)(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align); 50 typedef void (usb_bus_mem_cb_t)(struct usb_bus *bus, usb_bus_mem_sub_cb_t *scb); 51 52 /* 53 * The following structure is used to define all the USB BUS 54 * callbacks. 55 */ 56 struct usb_bus_methods { 57 /* USB Device and Host mode - Mandatory */ 58 59 usb_handle_req_t *roothub_exec; 60 61 void (*endpoint_init) (struct usb_device *, 62 struct usb_endpoint_descriptor *, struct usb_endpoint *); 63 void (*xfer_setup) (struct usb_setup_params *); 64 void (*xfer_unsetup) (struct usb_xfer *); 65 void (*get_dma_delay) (struct usb_device *, uint32_t *); 66 void (*device_suspend) (struct usb_device *); 67 void (*device_resume) (struct usb_device *); 68 void (*set_hw_power) (struct usb_bus *); 69 void (*set_hw_power_sleep) (struct usb_bus *, uint32_t); 70 /* 71 * The following flag is set if one or more control transfers are 72 * active: 73 */ 74 #define USB_HW_POWER_CONTROL 0x01 75 /* 76 * The following flag is set if one or more bulk transfers are 77 * active: 78 */ 79 #define USB_HW_POWER_BULK 0x02 80 /* 81 * The following flag is set if one or more interrupt transfers are 82 * active: 83 */ 84 #define USB_HW_POWER_INTERRUPT 0x04 85 /* 86 * The following flag is set if one or more isochronous transfers 87 * are active: 88 */ 89 #define USB_HW_POWER_ISOC 0x08 90 /* 91 * The following flag is set if one or more non-root-HUB devices 92 * are present on the given USB bus: 93 */ 94 #define USB_HW_POWER_NON_ROOT_HUB 0x10 95 /* 96 * The following flag is set if we are suspending 97 */ 98 #define USB_HW_POWER_SUSPEND 0x20 99 /* 100 * The following flag is set if we are resuming 101 */ 102 #define USB_HW_POWER_RESUME 0x40 103 /* 104 * The following flag is set if we are shutting down 105 */ 106 #define USB_HW_POWER_SHUTDOWN 0x60 107 108 /* USB Device mode only - Mandatory */ 109 110 void (*get_hw_ep_profile) (struct usb_device *udev, const struct usb_hw_ep_profile **ppf, uint8_t ep_addr); 111 void (*xfer_stall) (struct usb_xfer *xfer); 112 void (*set_stall) (struct usb_device *udev, struct usb_endpoint *ep, uint8_t *did_stall); 113 114 /* USB Device mode mandatory. USB Host mode optional. */ 115 116 void (*clear_stall) (struct usb_device *udev, struct usb_endpoint *ep); 117 118 /* Optional transfer polling support */ 119 120 void (*xfer_poll) (struct usb_bus *); 121 122 /* Optional fixed power mode support */ 123 124 void (*get_power_mode) (struct usb_device *udev, int8_t *pmode); 125 126 /* Optional endpoint uninit */ 127 128 void (*endpoint_uninit) (struct usb_device *, struct usb_endpoint *); 129 130 /* Optional device init */ 131 132 usb_error_t (*device_init) (struct usb_device *); 133 134 /* Optional device uninit */ 135 136 void (*device_uninit) (struct usb_device *); 137 138 /* Optional for device and host mode */ 139 140 void (*start_dma_delay) (struct usb_xfer *); 141 142 void (*device_state_change) (struct usb_device *); 143 144 /* Optional for host mode */ 145 146 usb_error_t (*set_address) (struct usb_device *, struct mtx *, uint16_t); 147 148 /* Optional for device and host mode */ 149 150 usb_error_t (*set_endpoint_mode) (struct usb_device *, struct usb_endpoint *, uint8_t); 151 }; 152 153 /* 154 * The following structure is used to define all the USB pipe 155 * callbacks. 156 */ 157 struct usb_pipe_methods { 158 /* Mandatory USB Device and Host mode callbacks: */ 159 160 void (*open)(struct usb_xfer *); 161 void (*close)(struct usb_xfer *); 162 163 void (*enter)(struct usb_xfer *); 164 void (*start)(struct usb_xfer *); 165 166 /* Optional */ 167 168 void *info; 169 }; 170 171 /* 172 * The following structure keeps information about what a hardware USB 173 * endpoint supports. 174 */ 175 struct usb_hw_ep_profile { 176 uint16_t max_in_frame_size; /* IN-token direction */ 177 uint16_t max_out_frame_size; /* OUT-token direction */ 178 uint8_t is_simplex:1; 179 uint8_t support_multi_buffer:1; 180 uint8_t support_bulk:1; 181 uint8_t support_control:1; 182 uint8_t support_interrupt:1; 183 uint8_t support_isochronous:1; 184 uint8_t support_in:1; /* IN-token is supported */ 185 uint8_t support_out:1; /* OUT-token is supported */ 186 }; 187 188 /* prototypes */ 189 190 void usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb); 191 uint8_t usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, usb_bus_mem_cb_t *cb); 192 void usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb); 193 uint16_t usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr); 194 void usb_bus_reset_async_locked(struct usb_bus *bus); 195 #if USB_HAVE_TT_SUPPORT 196 uint8_t usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time); 197 #endif 198 199 #endif /* _USB_CONTROLLER_H_ */ 200