xref: /freebsd/sys/dev/usb/template/usb_template.c (revision 57718be8fa0bd5edc11ab9a72e68cc71982939a6)
1 /* $FreeBSD$ */
2 /*-
3  * Copyright (c) 2007 Hans Petter Selasky. All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 /*
28  * This file contains sub-routines to build up USB descriptors from
29  * USB templates.
30  */
31 
32 #ifdef USB_GLOBAL_INCLUDE_FILE
33 #include USB_GLOBAL_INCLUDE_FILE
34 #else
35 #include <sys/stdint.h>
36 #include <sys/stddef.h>
37 #include <sys/param.h>
38 #include <sys/queue.h>
39 #include <sys/types.h>
40 #include <sys/systm.h>
41 #include <sys/kernel.h>
42 #include <sys/bus.h>
43 #include <sys/module.h>
44 #include <sys/lock.h>
45 #include <sys/mutex.h>
46 #include <sys/condvar.h>
47 #include <sys/sysctl.h>
48 #include <sys/sx.h>
49 #include <sys/unistd.h>
50 #include <sys/callout.h>
51 #include <sys/malloc.h>
52 #include <sys/priv.h>
53 
54 #include <dev/usb/usb.h>
55 #include <dev/usb/usb_ioctl.h>
56 #include <dev/usb/usbdi.h>
57 #include <dev/usb/usbdi_util.h>
58 #include "usbdevs.h"
59 
60 #include <dev/usb/usb_cdc.h>
61 #include <dev/usb/usb_core.h>
62 #include <dev/usb/usb_dynamic.h>
63 #include <dev/usb/usb_busdma.h>
64 #include <dev/usb/usb_process.h>
65 #include <dev/usb/usb_device.h>
66 
67 #define	USB_DEBUG_VAR usb_debug
68 #include <dev/usb/usb_debug.h>
69 
70 #include <dev/usb/usb_controller.h>
71 #include <dev/usb/usb_bus.h>
72 #include <dev/usb/usb_request.h>
73 #include <dev/usb/template/usb_template.h>
74 #endif			/* USB_GLOBAL_INCLUDE_FILE */
75 
76 MODULE_DEPEND(usb_template, usb, 1, 1, 1);
77 MODULE_VERSION(usb_template, 1);
78 
79 /* function prototypes */
80 
81 static void	usb_make_raw_desc(struct usb_temp_setup *, const uint8_t *);
82 static void	usb_make_endpoint_desc(struct usb_temp_setup *,
83 		    const struct usb_temp_endpoint_desc *);
84 static void	usb_make_interface_desc(struct usb_temp_setup *,
85 		    const struct usb_temp_interface_desc *);
86 static void	usb_make_config_desc(struct usb_temp_setup *,
87 		    const struct usb_temp_config_desc *);
88 static void	usb_make_device_desc(struct usb_temp_setup *,
89 		    const struct usb_temp_device_desc *);
90 static uint8_t	usb_hw_ep_match(const struct usb_hw_ep_profile *, uint8_t,
91 		    uint8_t);
92 static uint8_t	usb_hw_ep_find_match(struct usb_hw_ep_scratch *,
93 		    struct usb_hw_ep_scratch_sub *, uint8_t);
94 static uint8_t	usb_hw_ep_get_needs(struct usb_hw_ep_scratch *, uint8_t,
95 		    uint8_t);
96 static usb_error_t usb_hw_ep_resolve(struct usb_device *,
97 		    struct usb_descriptor *);
98 static const struct usb_temp_device_desc *usb_temp_get_tdd(struct usb_device *);
99 static void	*usb_temp_get_device_desc(struct usb_device *);
100 static void	*usb_temp_get_qualifier_desc(struct usb_device *);
101 static void	*usb_temp_get_config_desc(struct usb_device *, uint16_t *,
102 		    uint8_t);
103 static const void *usb_temp_get_string_desc(struct usb_device *, uint16_t,
104 		    uint8_t);
105 static const void *usb_temp_get_vendor_desc(struct usb_device *,
106 		    const struct usb_device_request *, uint16_t *plen);
107 static const void *usb_temp_get_hub_desc(struct usb_device *);
108 static usb_error_t usb_temp_get_desc(struct usb_device *,
109 		    struct usb_device_request *, const void **, uint16_t *);
110 static usb_error_t usb_temp_setup_by_index(struct usb_device *,
111 		    uint16_t index);
112 static void	usb_temp_init(void *);
113 
114 /*------------------------------------------------------------------------*
115  *	usb_make_raw_desc
116  *
117  * This function will insert a raw USB descriptor into the generated
118  * USB configuration.
119  *------------------------------------------------------------------------*/
120 static void
121 usb_make_raw_desc(struct usb_temp_setup *temp,
122     const uint8_t *raw)
123 {
124 	void *dst;
125 	uint8_t len;
126 
127 	/*
128          * The first byte of any USB descriptor gives the length.
129          */
130 	if (raw) {
131 		len = raw[0];
132 		if (temp->buf) {
133 			dst = USB_ADD_BYTES(temp->buf, temp->size);
134 			memcpy(dst, raw, len);
135 
136 			/* check if we have got a CDC union descriptor */
137 
138 			if ((raw[0] == sizeof(struct usb_cdc_union_descriptor)) &&
139 			    (raw[1] == UDESC_CS_INTERFACE) &&
140 			    (raw[2] == UDESCSUB_CDC_UNION)) {
141 				struct usb_cdc_union_descriptor *ud = (void *)dst;
142 
143 				/* update the interface numbers */
144 
145 				ud->bMasterInterface +=
146 				    temp->bInterfaceNumber;
147 				ud->bSlaveInterface[0] +=
148 				    temp->bInterfaceNumber;
149 			}
150 
151 			/* check if we have got an interface association descriptor */
152 
153 			if ((raw[0] == sizeof(struct usb_interface_assoc_descriptor)) &&
154 			    (raw[1] == UDESC_IFACE_ASSOC)) {
155 				struct usb_interface_assoc_descriptor *iad = (void *)dst;
156 
157 				/* update the interface number */
158 
159 				iad->bFirstInterface +=
160 				    temp->bInterfaceNumber;
161 			}
162 
163 			/* check if we have got a call management descriptor */
164 
165 			if ((raw[0] == sizeof(struct usb_cdc_cm_descriptor)) &&
166 			    (raw[1] == UDESC_CS_INTERFACE) &&
167 			    (raw[2] == UDESCSUB_CDC_CM)) {
168 				struct usb_cdc_cm_descriptor *ccd = (void *)dst;
169 
170 				/* update the interface number */
171 
172 				ccd->bDataInterface +=
173 				    temp->bInterfaceNumber;
174 			}
175 		}
176 		temp->size += len;
177 	}
178 }
179 
180 /*------------------------------------------------------------------------*
181  *	usb_make_endpoint_desc
182  *
183  * This function will generate an USB endpoint descriptor from the
184  * given USB template endpoint descriptor, which will be inserted into
185  * the USB configuration.
186  *------------------------------------------------------------------------*/
187 static void
188 usb_make_endpoint_desc(struct usb_temp_setup *temp,
189     const struct usb_temp_endpoint_desc *ted)
190 {
191 	struct usb_endpoint_descriptor *ed;
192 	const void **rd;
193 	uint16_t old_size;
194 	uint16_t mps;
195 	uint8_t ea;			/* Endpoint Address */
196 	uint8_t et;			/* Endpiont Type */
197 
198 	/* Reserve memory */
199 	old_size = temp->size;
200 
201 	ea = (ted->bEndpointAddress & (UE_ADDR | UE_DIR_IN | UE_DIR_OUT));
202 	et = (ted->bmAttributes & UE_XFERTYPE);
203 
204 	if (et == UE_ISOCHRONOUS) {
205 		/* account for extra byte fields */
206 		temp->size += sizeof(*ed) + 2;
207 	} else {
208 		temp->size += sizeof(*ed);
209 	}
210 
211 	/* Scan all Raw Descriptors first */
212 	rd = ted->ppRawDesc;
213 	if (rd) {
214 		while (*rd) {
215 			usb_make_raw_desc(temp, *rd);
216 			rd++;
217 		}
218 	}
219 	if (ted->pPacketSize == NULL) {
220 		/* not initialized */
221 		temp->err = USB_ERR_INVAL;
222 		return;
223 	}
224 	mps = ted->pPacketSize->mps[temp->usb_speed];
225 	if (mps == 0) {
226 		/* not initialized */
227 		temp->err = USB_ERR_INVAL;
228 		return;
229 	} else if (mps == UE_ZERO_MPS) {
230 		/* escape for Zero Max Packet Size */
231 		mps = 0;
232 	}
233 
234 	/*
235 	 * Fill out the real USB endpoint descriptor
236 	 * in case there is a buffer present:
237 	 */
238 	if (temp->buf) {
239 		ed = USB_ADD_BYTES(temp->buf, old_size);
240 		if (et == UE_ISOCHRONOUS)
241 			ed->bLength = sizeof(*ed) + 2;
242 		else
243 			ed->bLength = sizeof(*ed);
244 		ed->bDescriptorType = UDESC_ENDPOINT;
245 		ed->bEndpointAddress = ea;
246 		ed->bmAttributes = ted->bmAttributes;
247 		USETW(ed->wMaxPacketSize, mps);
248 
249 		/* setup bInterval parameter */
250 
251 		if (ted->pIntervals &&
252 		    ted->pIntervals->bInterval[temp->usb_speed]) {
253 			ed->bInterval =
254 			    ted->pIntervals->bInterval[temp->usb_speed];
255 		} else {
256 			switch (et) {
257 			case UE_BULK:
258 			case UE_CONTROL:
259 				ed->bInterval = 0;	/* not used */
260 				break;
261 			case UE_INTERRUPT:
262 				switch (temp->usb_speed) {
263 				case USB_SPEED_LOW:
264 				case USB_SPEED_FULL:
265 					ed->bInterval = 1;	/* 1 ms */
266 					break;
267 				default:
268 					ed->bInterval = 4;	/* 1 ms */
269 					break;
270 				}
271 				break;
272 			default:	/* UE_ISOCHRONOUS */
273 				switch (temp->usb_speed) {
274 				case USB_SPEED_LOW:
275 				case USB_SPEED_FULL:
276 					ed->bInterval = 1;	/* 1 ms */
277 					break;
278 				default:
279 					ed->bInterval = 1;	/* 125 us */
280 					break;
281 				}
282 				break;
283 			}
284 		}
285 	}
286 	temp->bNumEndpoints++;
287 }
288 
289 /*------------------------------------------------------------------------*
290  *	usb_make_interface_desc
291  *
292  * This function will generate an USB interface descriptor from the
293  * given USB template interface descriptor, which will be inserted
294  * into the USB configuration.
295  *------------------------------------------------------------------------*/
296 static void
297 usb_make_interface_desc(struct usb_temp_setup *temp,
298     const struct usb_temp_interface_desc *tid)
299 {
300 	struct usb_interface_descriptor *id;
301 	const struct usb_temp_endpoint_desc **ted;
302 	const void **rd;
303 	uint16_t old_size;
304 
305 	/* Reserve memory */
306 
307 	old_size = temp->size;
308 	temp->size += sizeof(*id);
309 
310 	/* Update interface and alternate interface numbers */
311 
312 	if (tid->isAltInterface == 0) {
313 		temp->bAlternateSetting = 0;
314 		temp->bInterfaceNumber++;
315 	} else {
316 		temp->bAlternateSetting++;
317 	}
318 
319 	/* Scan all Raw Descriptors first */
320 
321 	rd = tid->ppRawDesc;
322 
323 	if (rd) {
324 		while (*rd) {
325 			usb_make_raw_desc(temp, *rd);
326 			rd++;
327 		}
328 	}
329 	/* Reset some counters */
330 
331 	temp->bNumEndpoints = 0;
332 
333 	/* Scan all Endpoint Descriptors second */
334 
335 	ted = tid->ppEndpoints;
336 	if (ted) {
337 		while (*ted) {
338 			usb_make_endpoint_desc(temp, *ted);
339 			ted++;
340 		}
341 	}
342 	/*
343 	 * Fill out the real USB interface descriptor
344 	 * in case there is a buffer present:
345 	 */
346 	if (temp->buf) {
347 		id = USB_ADD_BYTES(temp->buf, old_size);
348 		id->bLength = sizeof(*id);
349 		id->bDescriptorType = UDESC_INTERFACE;
350 		id->bInterfaceNumber = temp->bInterfaceNumber;
351 		id->bAlternateSetting = temp->bAlternateSetting;
352 		id->bNumEndpoints = temp->bNumEndpoints;
353 		id->bInterfaceClass = tid->bInterfaceClass;
354 		id->bInterfaceSubClass = tid->bInterfaceSubClass;
355 		id->bInterfaceProtocol = tid->bInterfaceProtocol;
356 		id->iInterface = tid->iInterface;
357 	}
358 }
359 
360 /*------------------------------------------------------------------------*
361  *	usb_make_config_desc
362  *
363  * This function will generate an USB config descriptor from the given
364  * USB template config descriptor, which will be inserted into the USB
365  * configuration.
366  *------------------------------------------------------------------------*/
367 static void
368 usb_make_config_desc(struct usb_temp_setup *temp,
369     const struct usb_temp_config_desc *tcd)
370 {
371 	struct usb_config_descriptor *cd;
372 	const struct usb_temp_interface_desc **tid;
373 	uint16_t old_size;
374 
375 	/* Reserve memory */
376 
377 	old_size = temp->size;
378 	temp->size += sizeof(*cd);
379 
380 	/* Reset some counters */
381 
382 	temp->bInterfaceNumber = 0xFF;
383 	temp->bAlternateSetting = 0;
384 
385 	/* Scan all the USB interfaces */
386 
387 	tid = tcd->ppIfaceDesc;
388 	if (tid) {
389 		while (*tid) {
390 			usb_make_interface_desc(temp, *tid);
391 			tid++;
392 		}
393 	}
394 	/*
395 	 * Fill out the real USB config descriptor
396 	 * in case there is a buffer present:
397 	 */
398 	if (temp->buf) {
399 		cd = USB_ADD_BYTES(temp->buf, old_size);
400 
401 		/* compute total size */
402 		old_size = temp->size - old_size;
403 
404 		cd->bLength = sizeof(*cd);
405 		cd->bDescriptorType = UDESC_CONFIG;
406 		USETW(cd->wTotalLength, old_size);
407 		cd->bNumInterface = temp->bInterfaceNumber + 1;
408 		cd->bConfigurationValue = temp->bConfigurationValue;
409 		cd->iConfiguration = tcd->iConfiguration;
410 		cd->bmAttributes = tcd->bmAttributes;
411 		cd->bMaxPower = tcd->bMaxPower;
412 		cd->bmAttributes |= (UC_REMOTE_WAKEUP | UC_BUS_POWERED);
413 
414 		if (temp->self_powered) {
415 			cd->bmAttributes |= UC_SELF_POWERED;
416 		} else {
417 			cd->bmAttributes &= ~UC_SELF_POWERED;
418 		}
419 	}
420 }
421 
422 /*------------------------------------------------------------------------*
423  *	usb_make_device_desc
424  *
425  * This function will generate an USB device descriptor from the
426  * given USB template device descriptor.
427  *------------------------------------------------------------------------*/
428 static void
429 usb_make_device_desc(struct usb_temp_setup *temp,
430     const struct usb_temp_device_desc *tdd)
431 {
432 	struct usb_temp_data *utd;
433 	const struct usb_temp_config_desc **tcd;
434 	uint16_t old_size;
435 
436 	/* Reserve memory */
437 
438 	old_size = temp->size;
439 	temp->size += sizeof(*utd);
440 
441 	/* Scan all the USB configs */
442 
443 	temp->bConfigurationValue = 1;
444 	tcd = tdd->ppConfigDesc;
445 	if (tcd) {
446 		while (*tcd) {
447 			usb_make_config_desc(temp, *tcd);
448 			temp->bConfigurationValue++;
449 			tcd++;
450 		}
451 	}
452 	/*
453 	 * Fill out the real USB device descriptor
454 	 * in case there is a buffer present:
455 	 */
456 
457 	if (temp->buf) {
458 		utd = USB_ADD_BYTES(temp->buf, old_size);
459 
460 		/* Store a pointer to our template device descriptor */
461 		utd->tdd = tdd;
462 
463 		/* Fill out USB device descriptor */
464 		utd->udd.bLength = sizeof(utd->udd);
465 		utd->udd.bDescriptorType = UDESC_DEVICE;
466 		utd->udd.bDeviceClass = tdd->bDeviceClass;
467 		utd->udd.bDeviceSubClass = tdd->bDeviceSubClass;
468 		utd->udd.bDeviceProtocol = tdd->bDeviceProtocol;
469 		USETW(utd->udd.idVendor, tdd->idVendor);
470 		USETW(utd->udd.idProduct, tdd->idProduct);
471 		USETW(utd->udd.bcdDevice, tdd->bcdDevice);
472 		utd->udd.iManufacturer = tdd->iManufacturer;
473 		utd->udd.iProduct = tdd->iProduct;
474 		utd->udd.iSerialNumber = tdd->iSerialNumber;
475 		utd->udd.bNumConfigurations = temp->bConfigurationValue - 1;
476 
477 		/*
478 		 * Fill out the USB device qualifier. Pretend that we
479 		 * don't support any other speeds by setting
480 		 * "bNumConfigurations" equal to zero. That saves us
481 		 * generating an extra set of configuration
482 		 * descriptors.
483 		 */
484 		utd->udq.bLength = sizeof(utd->udq);
485 		utd->udq.bDescriptorType = UDESC_DEVICE_QUALIFIER;
486 		utd->udq.bDeviceClass = tdd->bDeviceClass;
487 		utd->udq.bDeviceSubClass = tdd->bDeviceSubClass;
488 		utd->udq.bDeviceProtocol = tdd->bDeviceProtocol;
489 		utd->udq.bNumConfigurations = 0;
490 		USETW(utd->udq.bcdUSB, 0x0200);
491 		utd->udq.bMaxPacketSize0 = 0;
492 
493 		switch (temp->usb_speed) {
494 		case USB_SPEED_LOW:
495 			USETW(utd->udd.bcdUSB, 0x0110);
496 			utd->udd.bMaxPacketSize = 8;
497 			break;
498 		case USB_SPEED_FULL:
499 			USETW(utd->udd.bcdUSB, 0x0110);
500 			utd->udd.bMaxPacketSize = 32;
501 			break;
502 		case USB_SPEED_HIGH:
503 			USETW(utd->udd.bcdUSB, 0x0200);
504 			utd->udd.bMaxPacketSize = 64;
505 			break;
506 		case USB_SPEED_VARIABLE:
507 			USETW(utd->udd.bcdUSB, 0x0250);
508 			utd->udd.bMaxPacketSize = 255;	/* 512 bytes */
509 			break;
510 		case USB_SPEED_SUPER:
511 			USETW(utd->udd.bcdUSB, 0x0300);
512 			utd->udd.bMaxPacketSize = 9;	/* 2**9 = 512 bytes */
513 			break;
514 		default:
515 			temp->err = USB_ERR_INVAL;
516 			break;
517 		}
518 	}
519 }
520 
521 /*------------------------------------------------------------------------*
522  *	usb_hw_ep_match
523  *
524  * Return values:
525  *    0: The endpoint profile does not match the criterias
526  * Else: The endpoint profile matches the criterias
527  *------------------------------------------------------------------------*/
528 static uint8_t
529 usb_hw_ep_match(const struct usb_hw_ep_profile *pf,
530     uint8_t ep_type, uint8_t ep_dir_in)
531 {
532 	if (ep_type == UE_CONTROL) {
533 		/* special */
534 		return (pf->support_control);
535 	}
536 	if ((pf->support_in && ep_dir_in) ||
537 	    (pf->support_out && !ep_dir_in)) {
538 		if ((pf->support_interrupt && (ep_type == UE_INTERRUPT)) ||
539 		    (pf->support_isochronous && (ep_type == UE_ISOCHRONOUS)) ||
540 		    (pf->support_bulk && (ep_type == UE_BULK))) {
541 			return (1);
542 		}
543 	}
544 	return (0);
545 }
546 
547 /*------------------------------------------------------------------------*
548  *	usb_hw_ep_find_match
549  *
550  * This function is used to find the best matching endpoint profile
551  * for and endpoint belonging to an USB descriptor.
552  *
553  * Return values:
554  *    0: Success. Got a match.
555  * Else: Failure. No match.
556  *------------------------------------------------------------------------*/
557 static uint8_t
558 usb_hw_ep_find_match(struct usb_hw_ep_scratch *ues,
559     struct usb_hw_ep_scratch_sub *ep, uint8_t is_simplex)
560 {
561 	const struct usb_hw_ep_profile *pf;
562 	uint16_t distance;
563 	uint16_t temp;
564 	uint16_t max_frame_size;
565 	uint8_t n;
566 	uint8_t best_n;
567 	uint8_t dir_in;
568 	uint8_t dir_out;
569 
570 	distance = 0xFFFF;
571 	best_n = 0;
572 
573 	if ((!ep->needs_in) && (!ep->needs_out)) {
574 		return (0);		/* we are done */
575 	}
576 	if (ep->needs_ep_type == UE_CONTROL) {
577 		dir_in = 1;
578 		dir_out = 1;
579 	} else {
580 		if (ep->needs_in) {
581 			dir_in = 1;
582 			dir_out = 0;
583 		} else {
584 			dir_in = 0;
585 			dir_out = 1;
586 		}
587 	}
588 
589 	for (n = 1; n != (USB_EP_MAX / 2); n++) {
590 
591 		/* get HW endpoint profile */
592 		(ues->methods->get_hw_ep_profile) (ues->udev, &pf, n);
593 		if (pf == NULL) {
594 			/* end of profiles */
595 			break;
596 		}
597 		/* check if IN-endpoint is reserved */
598 		if (dir_in || pf->is_simplex) {
599 			if (ues->bmInAlloc[n / 8] & (1 << (n % 8))) {
600 				/* mismatch */
601 				continue;
602 			}
603 		}
604 		/* check if OUT-endpoint is reserved */
605 		if (dir_out || pf->is_simplex) {
606 			if (ues->bmOutAlloc[n / 8] & (1 << (n % 8))) {
607 				/* mismatch */
608 				continue;
609 			}
610 		}
611 		/* check simplex */
612 		if (pf->is_simplex == is_simplex) {
613 			/* mismatch */
614 			continue;
615 		}
616 		/* check if HW endpoint matches */
617 		if (!usb_hw_ep_match(pf, ep->needs_ep_type, dir_in)) {
618 			/* mismatch */
619 			continue;
620 		}
621 		/* get maximum frame size */
622 		if (dir_in)
623 			max_frame_size = pf->max_in_frame_size;
624 		else
625 			max_frame_size = pf->max_out_frame_size;
626 
627 		/* check if we have a matching profile */
628 		if (max_frame_size >= ep->max_frame_size) {
629 			temp = (max_frame_size - ep->max_frame_size);
630 			if (distance > temp) {
631 				distance = temp;
632 				best_n = n;
633 				ep->pf = pf;
634 			}
635 		}
636 	}
637 
638 	/* see if we got a match */
639 	if (best_n != 0) {
640 		/* get the correct profile */
641 		pf = ep->pf;
642 
643 		/* reserve IN-endpoint */
644 		if (dir_in) {
645 			ues->bmInAlloc[best_n / 8] |=
646 			    (1 << (best_n % 8));
647 			ep->hw_endpoint_in = best_n | UE_DIR_IN;
648 			ep->needs_in = 0;
649 		}
650 		/* reserve OUT-endpoint */
651 		if (dir_out) {
652 			ues->bmOutAlloc[best_n / 8] |=
653 			    (1 << (best_n % 8));
654 			ep->hw_endpoint_out = best_n | UE_DIR_OUT;
655 			ep->needs_out = 0;
656 		}
657 		return (0);		/* got a match */
658 	}
659 	return (1);			/* failure */
660 }
661 
662 /*------------------------------------------------------------------------*
663  *	usb_hw_ep_get_needs
664  *
665  * This function will figure out the type and number of endpoints
666  * which are needed for an USB configuration.
667  *
668  * Return values:
669  *    0: Success.
670  * Else: Failure.
671  *------------------------------------------------------------------------*/
672 static uint8_t
673 usb_hw_ep_get_needs(struct usb_hw_ep_scratch *ues,
674     uint8_t ep_type, uint8_t is_complete)
675 {
676 	const struct usb_hw_ep_profile *pf;
677 	struct usb_hw_ep_scratch_sub *ep_iface;
678 	struct usb_hw_ep_scratch_sub *ep_curr;
679 	struct usb_hw_ep_scratch_sub *ep_max;
680 	struct usb_hw_ep_scratch_sub *ep_end;
681 	struct usb_descriptor *desc;
682 	struct usb_interface_descriptor *id;
683 	struct usb_endpoint_descriptor *ed;
684 	enum usb_dev_speed speed;
685 	uint16_t wMaxPacketSize;
686 	uint16_t temp;
687 	uint8_t ep_no;
688 
689 	ep_iface = ues->ep_max;
690 	ep_curr = ues->ep_max;
691 	ep_end = ues->ep + USB_EP_MAX;
692 	ep_max = ues->ep_max;
693 	desc = NULL;
694 	speed = usbd_get_speed(ues->udev);
695 
696 repeat:
697 
698 	while ((desc = usb_desc_foreach(ues->cd, desc))) {
699 
700 		if ((desc->bDescriptorType == UDESC_INTERFACE) &&
701 		    (desc->bLength >= sizeof(*id))) {
702 
703 			id = (void *)desc;
704 
705 			if (id->bAlternateSetting == 0) {
706 				/* going forward */
707 				ep_iface = ep_max;
708 			} else {
709 				/* reset */
710 				ep_curr = ep_iface;
711 			}
712 		}
713 		if ((desc->bDescriptorType == UDESC_ENDPOINT) &&
714 		    (desc->bLength >= sizeof(*ed))) {
715 
716 			ed = (void *)desc;
717 
718 			goto handle_endpoint_desc;
719 		}
720 	}
721 	ues->ep_max = ep_max;
722 	return (0);
723 
724 handle_endpoint_desc:
725 	temp = (ed->bmAttributes & UE_XFERTYPE);
726 
727 	if (temp == ep_type) {
728 
729 		if (ep_curr == ep_end) {
730 			/* too many endpoints */
731 			return (1);	/* failure */
732 		}
733 		wMaxPacketSize = UGETW(ed->wMaxPacketSize);
734 		if ((wMaxPacketSize & 0xF800) &&
735 		    (speed == USB_SPEED_HIGH)) {
736 			/* handle packet multiplier */
737 			temp = (wMaxPacketSize >> 11) & 3;
738 			wMaxPacketSize &= 0x7FF;
739 			if (temp == 1) {
740 				wMaxPacketSize *= 2;
741 			} else {
742 				wMaxPacketSize *= 3;
743 			}
744 		}
745 		/*
746 		 * Check if we have a fixed endpoint number, else the
747 		 * endpoint number is allocated dynamically:
748 		 */
749 		ep_no = (ed->bEndpointAddress & UE_ADDR);
750 		if (ep_no != 0) {
751 
752 			/* get HW endpoint profile */
753 			(ues->methods->get_hw_ep_profile)
754 			    (ues->udev, &pf, ep_no);
755 			if (pf == NULL) {
756 				/* HW profile does not exist - failure */
757 				DPRINTFN(0, "Endpoint profile %u "
758 				    "does not exist\n", ep_no);
759 				return (1);
760 			}
761 			/* reserve fixed endpoint number */
762 			if (ep_type == UE_CONTROL) {
763 				ues->bmInAlloc[ep_no / 8] |=
764 				    (1 << (ep_no % 8));
765 				ues->bmOutAlloc[ep_no / 8] |=
766 				    (1 << (ep_no % 8));
767 				if ((pf->max_in_frame_size < wMaxPacketSize) ||
768 				    (pf->max_out_frame_size < wMaxPacketSize)) {
769 					DPRINTFN(0, "Endpoint profile %u "
770 					    "has too small buffer\n", ep_no);
771 					return (1);
772 				}
773 			} else if (ed->bEndpointAddress & UE_DIR_IN) {
774 				ues->bmInAlloc[ep_no / 8] |=
775 				    (1 << (ep_no % 8));
776 				if (pf->max_in_frame_size < wMaxPacketSize) {
777 					DPRINTFN(0, "Endpoint profile %u "
778 					    "has too small buffer\n", ep_no);
779 					return (1);
780 				}
781 			} else {
782 				ues->bmOutAlloc[ep_no / 8] |=
783 				    (1 << (ep_no % 8));
784 				if (pf->max_out_frame_size < wMaxPacketSize) {
785 					DPRINTFN(0, "Endpoint profile %u "
786 					    "has too small buffer\n", ep_no);
787 					return (1);
788 				}
789 			}
790 		} else if (is_complete) {
791 
792 			/* check if we have enough buffer space */
793 			if (wMaxPacketSize >
794 			    ep_curr->max_frame_size) {
795 				return (1);	/* failure */
796 			}
797 			if (ed->bEndpointAddress & UE_DIR_IN) {
798 				ed->bEndpointAddress =
799 				    ep_curr->hw_endpoint_in;
800 			} else {
801 				ed->bEndpointAddress =
802 				    ep_curr->hw_endpoint_out;
803 			}
804 
805 		} else {
806 
807 			/* compute the maximum frame size */
808 			if (ep_curr->max_frame_size < wMaxPacketSize) {
809 				ep_curr->max_frame_size = wMaxPacketSize;
810 			}
811 			if (temp == UE_CONTROL) {
812 				ep_curr->needs_in = 1;
813 				ep_curr->needs_out = 1;
814 			} else {
815 				if (ed->bEndpointAddress & UE_DIR_IN) {
816 					ep_curr->needs_in = 1;
817 				} else {
818 					ep_curr->needs_out = 1;
819 				}
820 			}
821 			ep_curr->needs_ep_type = ep_type;
822 		}
823 
824 		ep_curr++;
825 		if (ep_max < ep_curr) {
826 			ep_max = ep_curr;
827 		}
828 	}
829 	goto repeat;
830 }
831 
832 /*------------------------------------------------------------------------*
833  *	usb_hw_ep_resolve
834  *
835  * This function will try to resolve endpoint requirements by the
836  * given endpoint profiles that the USB hardware reports.
837  *
838  * Return values:
839  *    0: Success
840  * Else: Failure
841  *------------------------------------------------------------------------*/
842 static usb_error_t
843 usb_hw_ep_resolve(struct usb_device *udev,
844     struct usb_descriptor *desc)
845 {
846 	struct usb_hw_ep_scratch *ues;
847 	struct usb_hw_ep_scratch_sub *ep;
848 	const struct usb_hw_ep_profile *pf;
849 	const struct usb_bus_methods *methods;
850 	struct usb_device_descriptor *dd;
851 	uint16_t mps;
852 
853 	if (desc == NULL)
854 		return (USB_ERR_INVAL);
855 
856 	/* get bus methods */
857 	methods = udev->bus->methods;
858 
859 	if (methods->get_hw_ep_profile == NULL)
860 		return (USB_ERR_INVAL);
861 
862 	if (desc->bDescriptorType == UDESC_DEVICE) {
863 
864 		if (desc->bLength < sizeof(*dd))
865 			return (USB_ERR_INVAL);
866 
867 		dd = (void *)desc;
868 
869 		/* get HW control endpoint 0 profile */
870 		(methods->get_hw_ep_profile) (udev, &pf, 0);
871 		if (pf == NULL) {
872 			return (USB_ERR_INVAL);
873 		}
874 		if (!usb_hw_ep_match(pf, UE_CONTROL, 0)) {
875 			DPRINTFN(0, "Endpoint 0 does not "
876 			    "support control\n");
877 			return (USB_ERR_INVAL);
878 		}
879 		mps = dd->bMaxPacketSize;
880 
881 		if (udev->speed == USB_SPEED_FULL) {
882 			/*
883 			 * We can optionally choose another packet size !
884 			 */
885 			while (1) {
886 				/* check if "mps" is ok */
887 				if (pf->max_in_frame_size >= mps) {
888 					break;
889 				}
890 				/* reduce maximum packet size */
891 				mps /= 2;
892 
893 				/* check if "mps" is too small */
894 				if (mps < 8) {
895 					return (USB_ERR_INVAL);
896 				}
897 			}
898 
899 			dd->bMaxPacketSize = mps;
900 
901 		} else {
902 			/* We only have one choice */
903 			if (mps == 255) {
904 				mps = 512;
905 			}
906 			/* Check if we support the specified wMaxPacketSize */
907 			if (pf->max_in_frame_size < mps) {
908 				return (USB_ERR_INVAL);
909 			}
910 		}
911 		return (0);		/* success */
912 	}
913 	if (desc->bDescriptorType != UDESC_CONFIG)
914 		return (USB_ERR_INVAL);
915 	if (desc->bLength < sizeof(*(ues->cd)))
916 		return (USB_ERR_INVAL);
917 
918 	ues = udev->scratch.hw_ep_scratch;
919 
920 	memset(ues, 0, sizeof(*ues));
921 
922 	ues->ep_max = ues->ep;
923 	ues->cd = (void *)desc;
924 	ues->methods = methods;
925 	ues->udev = udev;
926 
927 	/* Get all the endpoints we need */
928 
929 	if (usb_hw_ep_get_needs(ues, UE_ISOCHRONOUS, 0) ||
930 	    usb_hw_ep_get_needs(ues, UE_INTERRUPT, 0) ||
931 	    usb_hw_ep_get_needs(ues, UE_CONTROL, 0) ||
932 	    usb_hw_ep_get_needs(ues, UE_BULK, 0)) {
933 		DPRINTFN(0, "Could not get needs\n");
934 		return (USB_ERR_INVAL);
935 	}
936 	for (ep = ues->ep; ep != ues->ep_max; ep++) {
937 
938 		while (ep->needs_in || ep->needs_out) {
939 
940 			/*
941 		         * First try to use a simplex endpoint.
942 		         * Then try to use a duplex endpoint.
943 		         */
944 			if (usb_hw_ep_find_match(ues, ep, 1) &&
945 			    usb_hw_ep_find_match(ues, ep, 0)) {
946 				DPRINTFN(0, "Could not find match\n");
947 				return (USB_ERR_INVAL);
948 			}
949 		}
950 	}
951 
952 	ues->ep_max = ues->ep;
953 
954 	/* Update all endpoint addresses */
955 
956 	if (usb_hw_ep_get_needs(ues, UE_ISOCHRONOUS, 1) ||
957 	    usb_hw_ep_get_needs(ues, UE_INTERRUPT, 1) ||
958 	    usb_hw_ep_get_needs(ues, UE_CONTROL, 1) ||
959 	    usb_hw_ep_get_needs(ues, UE_BULK, 1)) {
960 		DPRINTFN(0, "Could not update endpoint address\n");
961 		return (USB_ERR_INVAL);
962 	}
963 	return (0);			/* success */
964 }
965 
966 /*------------------------------------------------------------------------*
967  *	usb_temp_get_tdd
968  *
969  * Returns:
970  *  NULL: No USB template device descriptor found.
971  *  Else: Pointer to the USB template device descriptor.
972  *------------------------------------------------------------------------*/
973 static const struct usb_temp_device_desc *
974 usb_temp_get_tdd(struct usb_device *udev)
975 {
976 	if (udev->usb_template_ptr == NULL) {
977 		return (NULL);
978 	}
979 	return (udev->usb_template_ptr->tdd);
980 }
981 
982 /*------------------------------------------------------------------------*
983  *	usb_temp_get_device_desc
984  *
985  * Returns:
986  *  NULL: No USB device descriptor found.
987  *  Else: Pointer to USB device descriptor.
988  *------------------------------------------------------------------------*/
989 static void *
990 usb_temp_get_device_desc(struct usb_device *udev)
991 {
992 	struct usb_device_descriptor *dd;
993 
994 	if (udev->usb_template_ptr == NULL) {
995 		return (NULL);
996 	}
997 	dd = &udev->usb_template_ptr->udd;
998 	if (dd->bDescriptorType != UDESC_DEVICE) {
999 		/* sanity check failed */
1000 		return (NULL);
1001 	}
1002 	return (dd);
1003 }
1004 
1005 /*------------------------------------------------------------------------*
1006  *	usb_temp_get_qualifier_desc
1007  *
1008  * Returns:
1009  *  NULL: No USB device_qualifier descriptor found.
1010  *  Else: Pointer to USB device_qualifier descriptor.
1011  *------------------------------------------------------------------------*/
1012 static void *
1013 usb_temp_get_qualifier_desc(struct usb_device *udev)
1014 {
1015 	struct usb_device_qualifier *dq;
1016 
1017 	if (udev->usb_template_ptr == NULL) {
1018 		return (NULL);
1019 	}
1020 	dq = &udev->usb_template_ptr->udq;
1021 	if (dq->bDescriptorType != UDESC_DEVICE_QUALIFIER) {
1022 		/* sanity check failed */
1023 		return (NULL);
1024 	}
1025 	return (dq);
1026 }
1027 
1028 /*------------------------------------------------------------------------*
1029  *	usb_temp_get_config_desc
1030  *
1031  * Returns:
1032  *  NULL: No USB config descriptor found.
1033  *  Else: Pointer to USB config descriptor having index "index".
1034  *------------------------------------------------------------------------*/
1035 static void *
1036 usb_temp_get_config_desc(struct usb_device *udev,
1037     uint16_t *pLength, uint8_t index)
1038 {
1039 	struct usb_device_descriptor *dd;
1040 	struct usb_config_descriptor *cd;
1041 	uint16_t temp;
1042 
1043 	if (udev->usb_template_ptr == NULL) {
1044 		return (NULL);
1045 	}
1046 	dd = &udev->usb_template_ptr->udd;
1047 	cd = (void *)(udev->usb_template_ptr + 1);
1048 
1049 	if (index >= dd->bNumConfigurations) {
1050 		/* out of range */
1051 		return (NULL);
1052 	}
1053 	while (index--) {
1054 		if (cd->bDescriptorType != UDESC_CONFIG) {
1055 			/* sanity check failed */
1056 			return (NULL);
1057 		}
1058 		temp = UGETW(cd->wTotalLength);
1059 		cd = USB_ADD_BYTES(cd, temp);
1060 	}
1061 
1062 	if (pLength) {
1063 		*pLength = UGETW(cd->wTotalLength);
1064 	}
1065 	return (cd);
1066 }
1067 
1068 /*------------------------------------------------------------------------*
1069  *	usb_temp_get_vendor_desc
1070  *
1071  * Returns:
1072  *  NULL: No vendor descriptor found.
1073  *  Else: Pointer to a vendor descriptor.
1074  *------------------------------------------------------------------------*/
1075 static const void *
1076 usb_temp_get_vendor_desc(struct usb_device *udev,
1077     const struct usb_device_request *req, uint16_t *plen)
1078 {
1079 	const struct usb_temp_device_desc *tdd;
1080 
1081 	tdd = usb_temp_get_tdd(udev);
1082 	if (tdd == NULL) {
1083 		return (NULL);
1084 	}
1085 	if (tdd->getVendorDesc == NULL) {
1086 		return (NULL);
1087 	}
1088 	return ((tdd->getVendorDesc) (req, plen));
1089 }
1090 
1091 /*------------------------------------------------------------------------*
1092  *	usb_temp_get_string_desc
1093  *
1094  * Returns:
1095  *  NULL: No string descriptor found.
1096  *  Else: Pointer to a string descriptor.
1097  *------------------------------------------------------------------------*/
1098 static const void *
1099 usb_temp_get_string_desc(struct usb_device *udev,
1100     uint16_t lang_id, uint8_t string_index)
1101 {
1102 	const struct usb_temp_device_desc *tdd;
1103 
1104 	tdd = usb_temp_get_tdd(udev);
1105 	if (tdd == NULL) {
1106 		return (NULL);
1107 	}
1108 	if (tdd->getStringDesc == NULL) {
1109 		return (NULL);
1110 	}
1111 	return ((tdd->getStringDesc) (lang_id, string_index));
1112 }
1113 
1114 /*------------------------------------------------------------------------*
1115  *	usb_temp_get_hub_desc
1116  *
1117  * Returns:
1118  *  NULL: No USB HUB descriptor found.
1119  *  Else: Pointer to a USB HUB descriptor.
1120  *------------------------------------------------------------------------*/
1121 static const void *
1122 usb_temp_get_hub_desc(struct usb_device *udev)
1123 {
1124 	return (NULL);			/* needs to be implemented */
1125 }
1126 
1127 /*------------------------------------------------------------------------*
1128  *	usb_temp_get_desc
1129  *
1130  * This function is a demultiplexer for local USB device side control
1131  * endpoint requests.
1132  *------------------------------------------------------------------------*/
1133 static usb_error_t
1134 usb_temp_get_desc(struct usb_device *udev, struct usb_device_request *req,
1135     const void **pPtr, uint16_t *pLength)
1136 {
1137 	const uint8_t *buf;
1138 	uint16_t len;
1139 
1140 	buf = NULL;
1141 	len = 0;
1142 
1143 	switch (req->bmRequestType) {
1144 	case UT_READ_DEVICE:
1145 		switch (req->bRequest) {
1146 		case UR_GET_DESCRIPTOR:
1147 			goto tr_handle_get_descriptor;
1148 		default:
1149 			goto tr_stalled;
1150 		}
1151 	case UT_READ_CLASS_DEVICE:
1152 		switch (req->bRequest) {
1153 		case UR_GET_DESCRIPTOR:
1154 			goto tr_handle_get_class_descriptor;
1155 		default:
1156 			goto tr_stalled;
1157 		}
1158 	default:
1159 		goto tr_stalled;
1160 	}
1161 
1162 tr_handle_get_descriptor:
1163 	switch (req->wValue[1]) {
1164 	case UDESC_DEVICE:
1165 		if (req->wValue[0]) {
1166 			goto tr_stalled;
1167 		}
1168 		buf = usb_temp_get_device_desc(udev);
1169 		goto tr_valid;
1170 	case UDESC_DEVICE_QUALIFIER:
1171 		if (udev->speed != USB_SPEED_HIGH) {
1172 			goto tr_stalled;
1173 		}
1174 		if (req->wValue[0]) {
1175 			goto tr_stalled;
1176 		}
1177 		buf = usb_temp_get_qualifier_desc(udev);
1178 		goto tr_valid;
1179 	case UDESC_OTHER_SPEED_CONFIGURATION:
1180 		if (udev->speed != USB_SPEED_HIGH) {
1181 			goto tr_stalled;
1182 		}
1183 	case UDESC_CONFIG:
1184 		buf = usb_temp_get_config_desc(udev,
1185 		    &len, req->wValue[0]);
1186 		goto tr_valid;
1187 	case UDESC_STRING:
1188 		buf = usb_temp_get_string_desc(udev,
1189 		    UGETW(req->wIndex), req->wValue[0]);
1190 		goto tr_valid;
1191 	default:
1192 		goto tr_stalled;
1193 	}
1194 
1195 tr_handle_get_class_descriptor:
1196 	if (req->wValue[0]) {
1197 		goto tr_stalled;
1198 	}
1199 	buf = usb_temp_get_hub_desc(udev);
1200 	goto tr_valid;
1201 
1202 tr_valid:
1203 	if (buf == NULL)
1204 		goto tr_stalled;
1205 	if (len == 0)
1206 		len = buf[0];
1207 	*pPtr = buf;
1208 	*pLength = len;
1209 	return (0);	/* success */
1210 
1211 tr_stalled:
1212 	/* try to get a vendor specific descriptor */
1213 	len = 0;
1214 	buf = usb_temp_get_vendor_desc(udev, req, &len);
1215 	if (buf != NULL)
1216 		goto tr_valid;
1217 	*pPtr = NULL;
1218 	*pLength = 0;
1219 	return (0);	/* we ignore failures */
1220 }
1221 
1222 /*------------------------------------------------------------------------*
1223  *	usb_temp_setup
1224  *
1225  * This function generates USB descriptors according to the given USB
1226  * template device descriptor. It will also try to figure out the best
1227  * matching endpoint addresses using the hardware endpoint profiles.
1228  *
1229  * Returns:
1230  *    0: Success
1231  * Else: Failure
1232  *------------------------------------------------------------------------*/
1233 usb_error_t
1234 usb_temp_setup(struct usb_device *udev,
1235     const struct usb_temp_device_desc *tdd)
1236 {
1237 	struct usb_temp_setup *uts;
1238 	void *buf;
1239 	usb_error_t error;
1240 	uint8_t n;
1241 	uint8_t do_unlock;
1242 
1243 	/* be NULL safe */
1244 	if (tdd == NULL)
1245 		return (0);
1246 
1247 	/* Protect scratch area */
1248 	do_unlock = usbd_enum_lock(udev);
1249 
1250 	uts = udev->scratch.temp_setup;
1251 
1252 	memset(uts, 0, sizeof(*uts));
1253 
1254 	uts->usb_speed = udev->speed;
1255 	uts->self_powered = udev->flags.self_powered;
1256 
1257 	/* first pass */
1258 
1259 	usb_make_device_desc(uts, tdd);
1260 
1261 	if (uts->err) {
1262 		/* some error happened */
1263 		goto done;
1264 	}
1265 	/* sanity check */
1266 	if (uts->size == 0) {
1267 		uts->err = USB_ERR_INVAL;
1268 		goto done;
1269 	}
1270 	/* allocate zeroed memory */
1271 	uts->buf = usbd_alloc_config_desc(udev, uts->size);
1272 	/*
1273 	 * Allow malloc() to return NULL regardless of M_WAITOK flag.
1274 	 * This helps when porting the software to non-FreeBSD
1275 	 * systems.
1276 	 */
1277 	if (uts->buf == NULL) {
1278 		/* could not allocate memory */
1279 		uts->err = USB_ERR_NOMEM;
1280 		goto done;
1281 	}
1282 	/* second pass */
1283 
1284 	uts->size = 0;
1285 
1286 	usb_make_device_desc(uts, tdd);
1287 
1288 	/*
1289 	 * Store a pointer to our descriptors:
1290 	 */
1291 	udev->usb_template_ptr = uts->buf;
1292 
1293 	if (uts->err) {
1294 		/* some error happened during second pass */
1295 		goto done;
1296 	}
1297 	/*
1298 	 * Resolve all endpoint addresses !
1299 	 */
1300 	buf = usb_temp_get_device_desc(udev);
1301 	uts->err = usb_hw_ep_resolve(udev, buf);
1302 	if (uts->err) {
1303 		DPRINTFN(0, "Could not resolve endpoints for "
1304 		    "Device Descriptor, error = %s\n",
1305 		    usbd_errstr(uts->err));
1306 		goto done;
1307 	}
1308 	for (n = 0;; n++) {
1309 
1310 		buf = usb_temp_get_config_desc(udev, NULL, n);
1311 		if (buf == NULL) {
1312 			break;
1313 		}
1314 		uts->err = usb_hw_ep_resolve(udev, buf);
1315 		if (uts->err) {
1316 			DPRINTFN(0, "Could not resolve endpoints for "
1317 			    "Config Descriptor %u, error = %s\n", n,
1318 			    usbd_errstr(uts->err));
1319 			goto done;
1320 		}
1321 	}
1322 done:
1323 	error = uts->err;
1324 	if (error)
1325 		usb_temp_unsetup(udev);
1326 	if (do_unlock)
1327 		usbd_enum_unlock(udev);
1328 	return (error);
1329 }
1330 
1331 /*------------------------------------------------------------------------*
1332  *	usb_temp_unsetup
1333  *
1334  * This function frees any memory associated with the currently
1335  * setup template, if any.
1336  *------------------------------------------------------------------------*/
1337 void
1338 usb_temp_unsetup(struct usb_device *udev)
1339 {
1340 	usbd_free_config_desc(udev, udev->usb_template_ptr);
1341 	udev->usb_template_ptr = NULL;
1342 }
1343 
1344 static usb_error_t
1345 usb_temp_setup_by_index(struct usb_device *udev, uint16_t index)
1346 {
1347 	usb_error_t err;
1348 
1349 	switch (index) {
1350 	case USB_TEMP_MSC:
1351 		err = usb_temp_setup(udev, &usb_template_msc);
1352 		break;
1353 	case USB_TEMP_CDCE:
1354 		err = usb_temp_setup(udev, &usb_template_cdce);
1355 		break;
1356 	case USB_TEMP_MTP:
1357 		err = usb_temp_setup(udev, &usb_template_mtp);
1358 		break;
1359 	case USB_TEMP_MODEM:
1360 		err = usb_temp_setup(udev, &usb_template_modem);
1361 		break;
1362 	case USB_TEMP_AUDIO:
1363 		err = usb_temp_setup(udev, &usb_template_audio);
1364 		break;
1365 	case USB_TEMP_KBD:
1366 		err = usb_temp_setup(udev, &usb_template_kbd);
1367 		break;
1368 	case USB_TEMP_MOUSE:
1369 		err = usb_temp_setup(udev, &usb_template_mouse);
1370 		break;
1371 	case USB_TEMP_PHONE:
1372 		err = usb_temp_setup(udev, &usb_template_phone);
1373 		break;
1374 	default:
1375 		return (USB_ERR_INVAL);
1376 	}
1377 
1378 	return (err);
1379 }
1380 
1381 static void
1382 usb_temp_init(void *arg)
1383 {
1384 	/* register our functions */
1385 	usb_temp_get_desc_p = &usb_temp_get_desc;
1386 	usb_temp_setup_by_index_p = &usb_temp_setup_by_index;
1387 	usb_temp_unsetup_p = &usb_temp_unsetup;
1388 }
1389 
1390 SYSINIT(usb_temp_init, SI_SUB_LOCK, SI_ORDER_FIRST, usb_temp_init, NULL);
1391 SYSUNINIT(usb_temp_unload, SI_SUB_LOCK, SI_ORDER_ANY, usb_temp_unload, NULL);
1392