1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (C) 2003-2005 Alan Stern 4 * Copyright (C) 2008 Hans Petter Selasky 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 3. The names of the above-listed copyright holders may not be used 17 * to endorse or promote products derived from this software without 18 * specific prior written permission. 19 * 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS 22 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 23 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR 25 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 26 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 27 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 28 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF 29 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 30 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 31 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 /* 35 * NOTE: Much of the SCSI statemachine handling code derives from the 36 * Linux USB gadget stack. 37 */ 38 39 #include <sys/stdint.h> 40 #include <sys/stddef.h> 41 #include <sys/param.h> 42 #include <sys/queue.h> 43 #include <sys/types.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/bus.h> 47 #include <sys/module.h> 48 #include <sys/lock.h> 49 #include <sys/mutex.h> 50 #include <sys/condvar.h> 51 #include <sys/sysctl.h> 52 #include <sys/sx.h> 53 #include <sys/unistd.h> 54 #include <sys/callout.h> 55 #include <sys/malloc.h> 56 #include <sys/priv.h> 57 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbdi.h> 60 #include "usbdevs.h" 61 #include "usb_if.h" 62 63 #define USB_DEBUG_VAR ustorage_fs_debug 64 #include <dev/usb/usb_debug.h> 65 66 #ifdef USB_DEBUG 67 static int ustorage_fs_debug = 0; 68 69 SYSCTL_NODE(_hw_usb, OID_AUTO, ustorage_fs, CTLFLAG_RW, 0, "USB ustorage_fs"); 70 SYSCTL_INT(_hw_usb_ustorage_fs, OID_AUTO, debug, CTLFLAG_RW, 71 &ustorage_fs_debug, 0, "ustorage_fs debug level"); 72 #endif 73 74 /* Define some limits */ 75 76 #ifndef USTORAGE_FS_BULK_SIZE 77 #define USTORAGE_FS_BULK_SIZE (1U << 17) /* bytes */ 78 #endif 79 80 #ifndef USTORAGE_FS_MAX_LUN 81 #define USTORAGE_FS_MAX_LUN 8 /* units */ 82 #endif 83 84 #ifndef USTORAGE_QDATA_MAX 85 #define USTORAGE_QDATA_MAX 40 /* bytes */ 86 #endif 87 88 /* 89 * The SCSI ID string must be exactly 28 characters long 90 * exluding the terminating zero. 91 */ 92 #ifndef USTORAGE_FS_ID_STRING 93 #define USTORAGE_FS_ID_STRING \ 94 "FreeBSD " /* 8 */ \ 95 "File-Stor Gadget" /* 16 */ \ 96 "0101" /* 4 */ 97 #endif 98 99 /* 100 * The following macro defines the number of 101 * sectors to be allocated for the RAM disk: 102 */ 103 #ifndef USTORAGE_FS_RAM_SECT 104 #define USTORAGE_FS_RAM_SECT (1UL << 13) 105 #endif 106 107 static uint8_t *ustorage_fs_ramdisk; 108 109 /* USB transfer definitions */ 110 111 #define USTORAGE_FS_T_BBB_COMMAND 0 112 #define USTORAGE_FS_T_BBB_DATA_DUMP 1 113 #define USTORAGE_FS_T_BBB_DATA_READ 2 114 #define USTORAGE_FS_T_BBB_DATA_WRITE 3 115 #define USTORAGE_FS_T_BBB_STATUS 4 116 #define USTORAGE_FS_T_BBB_MAX 5 117 118 /* USB data stage direction */ 119 120 #define DIR_NONE 0 121 #define DIR_READ 1 122 #define DIR_WRITE 2 123 124 /* USB interface specific control request */ 125 126 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 127 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 128 129 /* Command Block Wrapper */ 130 typedef struct { 131 uDWord dCBWSignature; 132 #define CBWSIGNATURE 0x43425355 133 uDWord dCBWTag; 134 uDWord dCBWDataTransferLength; 135 uByte bCBWFlags; 136 #define CBWFLAGS_OUT 0x00 137 #define CBWFLAGS_IN 0x80 138 uByte bCBWLUN; 139 uByte bCDBLength; 140 #define CBWCDBLENGTH 16 141 uByte CBWCDB[CBWCDBLENGTH]; 142 } __packed ustorage_fs_bbb_cbw_t; 143 144 #define USTORAGE_FS_BBB_CBW_SIZE 31 145 146 /* Command Status Wrapper */ 147 typedef struct { 148 uDWord dCSWSignature; 149 #define CSWSIGNATURE 0x53425355 150 uDWord dCSWTag; 151 uDWord dCSWDataResidue; 152 uByte bCSWStatus; 153 #define CSWSTATUS_GOOD 0x0 154 #define CSWSTATUS_FAILED 0x1 155 #define CSWSTATUS_PHASE 0x2 156 } __packed ustorage_fs_bbb_csw_t; 157 158 #define USTORAGE_FS_BBB_CSW_SIZE 13 159 160 struct ustorage_fs_lun { 161 162 uint8_t *memory_image; 163 164 uint32_t num_sectors; 165 uint32_t sense_data; 166 uint32_t sense_data_info; 167 uint32_t unit_attention_data; 168 169 uint8_t read_only:1; 170 uint8_t prevent_medium_removal:1; 171 uint8_t info_valid:1; 172 uint8_t removable:1; 173 }; 174 175 struct ustorage_fs_softc { 176 177 ustorage_fs_bbb_cbw_t *sc_cbw; /* Command Wrapper Block */ 178 ustorage_fs_bbb_csw_t *sc_csw; /* Command Status Block */ 179 void *sc_dma_ptr; /* Main data buffer */ 180 181 struct mtx sc_mtx; 182 183 struct ustorage_fs_lun sc_lun[USTORAGE_FS_MAX_LUN]; 184 185 struct { 186 uint8_t *data_ptr; 187 struct ustorage_fs_lun *currlun; 188 189 uint32_t data_rem; /* bytes, as reported by the command 190 * block wrapper */ 191 uint32_t offset; /* bytes */ 192 193 uint8_t cbw_dir; 194 uint8_t cmd_dir; 195 uint8_t lun; 196 uint8_t cmd_len; 197 uint8_t data_short:1; 198 uint8_t data_error:1; 199 } sc_transfer; 200 201 device_t sc_dev; 202 struct usb_device *sc_udev; 203 struct usb_xfer *sc_xfer[USTORAGE_FS_T_BBB_MAX]; 204 205 uint8_t sc_iface_no; /* interface number */ 206 uint8_t sc_last_lun; 207 uint8_t sc_last_xfer_index; 208 uint8_t sc_qdata[USTORAGE_QDATA_MAX]; 209 }; 210 211 /* prototypes */ 212 213 static device_probe_t ustorage_fs_probe; 214 static device_attach_t ustorage_fs_attach; 215 static device_detach_t ustorage_fs_detach; 216 static device_suspend_t ustorage_fs_suspend; 217 static device_resume_t ustorage_fs_resume; 218 static usb_handle_request_t ustorage_fs_handle_request; 219 220 static usb_callback_t ustorage_fs_t_bbb_command_callback; 221 static usb_callback_t ustorage_fs_t_bbb_data_dump_callback; 222 static usb_callback_t ustorage_fs_t_bbb_data_read_callback; 223 static usb_callback_t ustorage_fs_t_bbb_data_write_callback; 224 static usb_callback_t ustorage_fs_t_bbb_status_callback; 225 226 static void ustorage_fs_transfer_start(struct ustorage_fs_softc *sc, uint8_t xfer_index); 227 static void ustorage_fs_transfer_stop(struct ustorage_fs_softc *sc); 228 229 static uint8_t ustorage_fs_verify(struct ustorage_fs_softc *sc); 230 static uint8_t ustorage_fs_inquiry(struct ustorage_fs_softc *sc); 231 static uint8_t ustorage_fs_request_sense(struct ustorage_fs_softc *sc); 232 static uint8_t ustorage_fs_read_capacity(struct ustorage_fs_softc *sc); 233 static uint8_t ustorage_fs_mode_sense(struct ustorage_fs_softc *sc); 234 static uint8_t ustorage_fs_start_stop(struct ustorage_fs_softc *sc); 235 static uint8_t ustorage_fs_prevent_allow(struct ustorage_fs_softc *sc); 236 static uint8_t ustorage_fs_read_format_capacities(struct ustorage_fs_softc *sc); 237 static uint8_t ustorage_fs_mode_select(struct ustorage_fs_softc *sc); 238 static uint8_t ustorage_fs_min_len(struct ustorage_fs_softc *sc, uint32_t len, uint32_t mask); 239 static uint8_t ustorage_fs_read(struct ustorage_fs_softc *sc); 240 static uint8_t ustorage_fs_write(struct ustorage_fs_softc *sc); 241 static uint8_t ustorage_fs_check_cmd(struct ustorage_fs_softc *sc, uint8_t cmd_size, uint16_t mask, uint8_t needs_medium); 242 static uint8_t ustorage_fs_do_cmd(struct ustorage_fs_softc *sc); 243 244 static device_method_t ustorage_fs_methods[] = { 245 /* USB interface */ 246 DEVMETHOD(usb_handle_request, ustorage_fs_handle_request), 247 248 /* Device interface */ 249 DEVMETHOD(device_probe, ustorage_fs_probe), 250 DEVMETHOD(device_attach, ustorage_fs_attach), 251 DEVMETHOD(device_detach, ustorage_fs_detach), 252 DEVMETHOD(device_suspend, ustorage_fs_suspend), 253 DEVMETHOD(device_resume, ustorage_fs_resume), 254 255 {0, 0} 256 }; 257 258 static driver_t ustorage_fs_driver = { 259 .name = "ustorage_fs", 260 .methods = ustorage_fs_methods, 261 .size = sizeof(struct ustorage_fs_softc), 262 }; 263 264 static devclass_t ustorage_fs_devclass; 265 266 DRIVER_MODULE(ustorage_fs, uhub, ustorage_fs_driver, ustorage_fs_devclass, NULL, 0); 267 MODULE_VERSION(ustorage_fs, 0); 268 MODULE_DEPEND(ustorage_fs, usb, 1, 1, 1); 269 270 static struct usb_config ustorage_fs_bbb_config[USTORAGE_FS_T_BBB_MAX] = { 271 272 [USTORAGE_FS_T_BBB_COMMAND] = { 273 .type = UE_BULK, 274 .endpoint = UE_ADDR_ANY, 275 .direction = UE_DIR_OUT, 276 .bufsize = sizeof(ustorage_fs_bbb_cbw_t), 277 .callback = &ustorage_fs_t_bbb_command_callback, 278 .usb_mode = USB_MODE_DEVICE, 279 }, 280 281 [USTORAGE_FS_T_BBB_DATA_DUMP] = { 282 .type = UE_BULK, 283 .endpoint = UE_ADDR_ANY, 284 .direction = UE_DIR_OUT, 285 .bufsize = 0, /* use wMaxPacketSize */ 286 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,}, 287 .callback = &ustorage_fs_t_bbb_data_dump_callback, 288 .usb_mode = USB_MODE_DEVICE, 289 }, 290 291 [USTORAGE_FS_T_BBB_DATA_READ] = { 292 .type = UE_BULK, 293 .endpoint = UE_ADDR_ANY, 294 .direction = UE_DIR_OUT, 295 .bufsize = USTORAGE_FS_BULK_SIZE, 296 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1}, 297 .callback = &ustorage_fs_t_bbb_data_read_callback, 298 .usb_mode = USB_MODE_DEVICE, 299 }, 300 301 [USTORAGE_FS_T_BBB_DATA_WRITE] = { 302 .type = UE_BULK, 303 .endpoint = UE_ADDR_ANY, 304 .direction = UE_DIR_IN, 305 .bufsize = USTORAGE_FS_BULK_SIZE, 306 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer = 1}, 307 .callback = &ustorage_fs_t_bbb_data_write_callback, 308 .usb_mode = USB_MODE_DEVICE, 309 }, 310 311 [USTORAGE_FS_T_BBB_STATUS] = { 312 .type = UE_BULK, 313 .endpoint = UE_ADDR_ANY, 314 .direction = UE_DIR_IN, 315 .bufsize = sizeof(ustorage_fs_bbb_csw_t), 316 .flags = {.short_xfer_ok = 1}, 317 .callback = &ustorage_fs_t_bbb_status_callback, 318 .usb_mode = USB_MODE_DEVICE, 319 }, 320 }; 321 322 /* 323 * USB device probe/attach/detach 324 */ 325 326 static int 327 ustorage_fs_probe(device_t dev) 328 { 329 struct usb_attach_arg *uaa = device_get_ivars(dev); 330 struct usb_interface_descriptor *id; 331 332 if (uaa->usb_mode != USB_MODE_DEVICE) { 333 return (ENXIO); 334 } 335 /* Check for a standards compliant device */ 336 id = usbd_get_interface_descriptor(uaa->iface); 337 if ((id == NULL) || 338 (id->bInterfaceClass != UICLASS_MASS) || 339 (id->bInterfaceSubClass != UISUBCLASS_SCSI) || 340 (id->bInterfaceProtocol != UIPROTO_MASS_BBB)) { 341 return (ENXIO); 342 } 343 return (BUS_PROBE_GENERIC); 344 } 345 346 static int 347 ustorage_fs_attach(device_t dev) 348 { 349 struct ustorage_fs_softc *sc = device_get_softc(dev); 350 struct usb_attach_arg *uaa = device_get_ivars(dev); 351 struct usb_interface_descriptor *id; 352 int err; 353 int unit; 354 355 /* 356 * NOTE: the softc struct is cleared in device_set_driver. 357 * We can safely call ustorage_fs_detach without specifically 358 * initializing the struct. 359 */ 360 361 sc->sc_dev = dev; 362 sc->sc_udev = uaa->device; 363 unit = device_get_unit(dev); 364 365 /* enable power saving mode */ 366 usbd_set_power_mode(uaa->device, USB_POWER_MODE_SAVE); 367 368 if (unit == 0) { 369 if (ustorage_fs_ramdisk == NULL) { 370 /* 371 * allocate a memory image for our ramdisk until 372 * further 373 */ 374 ustorage_fs_ramdisk = 375 malloc(USTORAGE_FS_RAM_SECT << 9, M_USB, 376 M_ZERO | M_WAITOK); 377 378 if (ustorage_fs_ramdisk == NULL) { 379 return (ENOMEM); 380 } 381 } 382 sc->sc_lun[0].memory_image = ustorage_fs_ramdisk; 383 sc->sc_lun[0].num_sectors = USTORAGE_FS_RAM_SECT; 384 sc->sc_lun[0].removable = 1; 385 } 386 387 device_set_usb_desc(dev); 388 389 mtx_init(&sc->sc_mtx, "USTORAGE_FS lock", 390 NULL, (MTX_DEF | MTX_RECURSE)); 391 392 /* get interface index */ 393 394 id = usbd_get_interface_descriptor(uaa->iface); 395 if (id == NULL) { 396 device_printf(dev, "failed to get " 397 "interface number\n"); 398 goto detach; 399 } 400 sc->sc_iface_no = id->bInterfaceNumber; 401 402 err = usbd_transfer_setup(uaa->device, 403 &uaa->info.bIfaceIndex, sc->sc_xfer, ustorage_fs_bbb_config, 404 USTORAGE_FS_T_BBB_MAX, sc, &sc->sc_mtx); 405 if (err) { 406 device_printf(dev, "could not setup required " 407 "transfers, %s\n", usbd_errstr(err)); 408 goto detach; 409 } 410 411 sc->sc_cbw = usbd_xfer_get_frame_buffer(sc->sc_xfer[ 412 USTORAGE_FS_T_BBB_COMMAND], 0); 413 sc->sc_csw = usbd_xfer_get_frame_buffer(sc->sc_xfer[ 414 USTORAGE_FS_T_BBB_STATUS], 0); 415 sc->sc_dma_ptr = usbd_xfer_get_frame_buffer(sc->sc_xfer[ 416 USTORAGE_FS_T_BBB_DATA_READ], 0); 417 418 /* start Mass Storage State Machine */ 419 420 mtx_lock(&sc->sc_mtx); 421 ustorage_fs_transfer_start(sc, USTORAGE_FS_T_BBB_COMMAND); 422 mtx_unlock(&sc->sc_mtx); 423 424 return (0); /* success */ 425 426 detach: 427 ustorage_fs_detach(dev); 428 return (ENXIO); /* failure */ 429 } 430 431 static int 432 ustorage_fs_detach(device_t dev) 433 { 434 struct ustorage_fs_softc *sc = device_get_softc(dev); 435 436 /* teardown our statemachine */ 437 438 usbd_transfer_unsetup(sc->sc_xfer, USTORAGE_FS_T_BBB_MAX); 439 440 mtx_destroy(&sc->sc_mtx); 441 442 return (0); /* success */ 443 } 444 445 static int 446 ustorage_fs_suspend(device_t dev) 447 { 448 device_printf(dev, "suspending\n"); 449 return (0); /* success */ 450 } 451 452 static int 453 ustorage_fs_resume(device_t dev) 454 { 455 device_printf(dev, "resuming\n"); 456 return (0); /* success */ 457 } 458 459 /* 460 * Generic functions to handle transfers 461 */ 462 463 static void 464 ustorage_fs_transfer_start(struct ustorage_fs_softc *sc, uint8_t xfer_index) 465 { 466 if (sc->sc_xfer[xfer_index]) { 467 sc->sc_last_xfer_index = xfer_index; 468 usbd_transfer_start(sc->sc_xfer[xfer_index]); 469 } 470 } 471 472 static void 473 ustorage_fs_transfer_stop(struct ustorage_fs_softc *sc) 474 { 475 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 476 mtx_unlock(&sc->sc_mtx); 477 usbd_transfer_drain(sc->sc_xfer[sc->sc_last_xfer_index]); 478 mtx_lock(&sc->sc_mtx); 479 } 480 481 static int 482 ustorage_fs_handle_request(device_t dev, 483 const void *preq, void **pptr, uint16_t *plen, 484 uint16_t offset, uint8_t *pstate) 485 { 486 struct ustorage_fs_softc *sc = device_get_softc(dev); 487 const struct usb_device_request *req = preq; 488 uint8_t is_complete = *pstate; 489 490 if (!is_complete) { 491 if ((req->bmRequestType == UT_WRITE_CLASS_INTERFACE) && 492 (req->bRequest == UR_BBB_RESET)) { 493 *plen = 0; 494 mtx_lock(&sc->sc_mtx); 495 ustorage_fs_transfer_stop(sc); 496 sc->sc_transfer.data_error = 1; 497 ustorage_fs_transfer_start(sc, 498 USTORAGE_FS_T_BBB_COMMAND); 499 mtx_unlock(&sc->sc_mtx); 500 return (0); 501 } else if ((req->bmRequestType == UT_READ_CLASS_INTERFACE) && 502 (req->bRequest == UR_BBB_GET_MAX_LUN)) { 503 if (offset == 0) { 504 *plen = 1; 505 *pptr = &sc->sc_last_lun; 506 } else { 507 *plen = 0; 508 } 509 return (0); 510 } 511 } 512 return (ENXIO); /* use builtin handler */ 513 } 514 515 static void 516 ustorage_fs_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 517 { 518 struct ustorage_fs_softc *sc = usbd_xfer_softc(xfer); 519 uint32_t tag; 520 uint8_t err = 0; 521 522 DPRINTF("\n"); 523 524 switch (USB_GET_STATE(xfer)) { 525 case USB_ST_TRANSFERRED: 526 527 tag = UGETDW(sc->sc_cbw->dCBWSignature); 528 529 if (tag != CBWSIGNATURE) { 530 /* do nothing */ 531 DPRINTF("invalid signature 0x%08x\n", tag); 532 break; 533 } 534 tag = UGETDW(sc->sc_cbw->dCBWTag); 535 536 /* echo back tag */ 537 USETDW(sc->sc_csw->dCSWTag, tag); 538 539 /* reset status */ 540 sc->sc_csw->bCSWStatus = 0; 541 542 /* reset data offset, data length and data remainder */ 543 sc->sc_transfer.offset = 0; 544 sc->sc_transfer.data_rem = 545 UGETDW(sc->sc_cbw->dCBWDataTransferLength); 546 547 /* reset data flags */ 548 sc->sc_transfer.data_short = 0; 549 550 /* extract LUN */ 551 sc->sc_transfer.lun = sc->sc_cbw->bCBWLUN; 552 553 if (sc->sc_transfer.data_rem == 0) { 554 sc->sc_transfer.cbw_dir = DIR_NONE; 555 } else { 556 if (sc->sc_cbw->bCBWFlags & CBWFLAGS_IN) { 557 sc->sc_transfer.cbw_dir = DIR_WRITE; 558 } else { 559 sc->sc_transfer.cbw_dir = DIR_READ; 560 } 561 } 562 563 sc->sc_transfer.cmd_len = sc->sc_cbw->bCDBLength; 564 if ((sc->sc_transfer.cmd_len > sizeof(sc->sc_cbw->CBWCDB)) || 565 (sc->sc_transfer.cmd_len == 0)) { 566 /* just halt - this is invalid */ 567 DPRINTF("invalid command length %d bytes\n", 568 sc->sc_transfer.cmd_len); 569 break; 570 } 571 572 err = ustorage_fs_do_cmd(sc); 573 if (err) { 574 /* got an error */ 575 DPRINTF("command failed\n"); 576 break; 577 } 578 if ((sc->sc_transfer.data_rem > 0) && 579 (sc->sc_transfer.cbw_dir != sc->sc_transfer.cmd_dir)) { 580 /* contradicting data transfer direction */ 581 err = 1; 582 DPRINTF("data direction mismatch\n"); 583 break; 584 } 585 switch (sc->sc_transfer.cbw_dir) { 586 case DIR_READ: 587 ustorage_fs_transfer_start(sc, USTORAGE_FS_T_BBB_DATA_READ); 588 break; 589 case DIR_WRITE: 590 ustorage_fs_transfer_start(sc, USTORAGE_FS_T_BBB_DATA_WRITE); 591 break; 592 default: 593 ustorage_fs_transfer_start(sc, 594 USTORAGE_FS_T_BBB_STATUS); 595 break; 596 } 597 break; 598 599 case USB_ST_SETUP: 600 tr_setup: 601 if (sc->sc_transfer.data_error) { 602 sc->sc_transfer.data_error = 0; 603 usbd_xfer_set_stall(xfer); 604 DPRINTF("stall pipe\n"); 605 } 606 usbd_xfer_set_frame_len(xfer, 0, 607 sizeof(ustorage_fs_bbb_cbw_t)); 608 usbd_transfer_submit(xfer); 609 break; 610 611 default: /* Error */ 612 DPRINTF("error\n"); 613 if (error == USB_ERR_CANCELLED) { 614 break; 615 } 616 /* If the pipe is already stalled, don't do another stall */ 617 if (!usbd_xfer_is_stalled(xfer)) 618 sc->sc_transfer.data_error = 1; 619 620 /* try again */ 621 goto tr_setup; 622 } 623 if (err) { 624 if (sc->sc_csw->bCSWStatus == 0) { 625 /* set some default error code */ 626 sc->sc_csw->bCSWStatus = CSWSTATUS_FAILED; 627 } 628 if (sc->sc_transfer.cbw_dir == DIR_READ) { 629 /* dump all data */ 630 ustorage_fs_transfer_start(sc, 631 USTORAGE_FS_T_BBB_DATA_DUMP); 632 return; 633 } 634 if (sc->sc_transfer.cbw_dir == DIR_WRITE) { 635 /* need to stall before status */ 636 sc->sc_transfer.data_error = 1; 637 } 638 ustorage_fs_transfer_start(sc, USTORAGE_FS_T_BBB_STATUS); 639 } 640 } 641 642 static void 643 ustorage_fs_t_bbb_data_dump_callback(struct usb_xfer *xfer, usb_error_t error) 644 { 645 struct ustorage_fs_softc *sc = usbd_xfer_softc(xfer); 646 uint32_t max_bulk = usbd_xfer_max_len(xfer); 647 int actlen, sumlen; 648 649 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 650 651 DPRINTF("\n"); 652 653 switch (USB_GET_STATE(xfer)) { 654 case USB_ST_TRANSFERRED: 655 sc->sc_transfer.data_rem -= actlen; 656 sc->sc_transfer.offset += actlen; 657 658 if (actlen != sumlen || sc->sc_transfer.data_rem == 0) { 659 /* short transfer or end of data */ 660 ustorage_fs_transfer_start(sc, 661 USTORAGE_FS_T_BBB_STATUS); 662 break; 663 } 664 /* Fallthrough */ 665 666 case USB_ST_SETUP: 667 tr_setup: 668 if (max_bulk > sc->sc_transfer.data_rem) { 669 max_bulk = sc->sc_transfer.data_rem; 670 } 671 if (sc->sc_transfer.data_error) { 672 sc->sc_transfer.data_error = 0; 673 usbd_xfer_set_stall(xfer); 674 } 675 usbd_xfer_set_frame_len(xfer, 0, max_bulk); 676 usbd_transfer_submit(xfer); 677 break; 678 679 default: /* Error */ 680 if (error == USB_ERR_CANCELLED) { 681 break; 682 } 683 /* 684 * If the pipe is already stalled, don't do another stall: 685 */ 686 if (!usbd_xfer_is_stalled(xfer)) 687 sc->sc_transfer.data_error = 1; 688 689 /* try again */ 690 goto tr_setup; 691 } 692 } 693 694 static void 695 ustorage_fs_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 696 { 697 struct ustorage_fs_softc *sc = usbd_xfer_softc(xfer); 698 uint32_t max_bulk = usbd_xfer_max_len(xfer); 699 int actlen, sumlen; 700 701 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 702 703 DPRINTF("\n"); 704 705 switch (USB_GET_STATE(xfer)) { 706 case USB_ST_TRANSFERRED: 707 /* XXX copy data from DMA buffer */ 708 memcpy(sc->sc_transfer.data_ptr, sc->sc_dma_ptr, actlen); 709 710 sc->sc_transfer.data_rem -= actlen; 711 sc->sc_transfer.data_ptr += actlen; 712 sc->sc_transfer.offset += actlen; 713 714 if (actlen != sumlen || sc->sc_transfer.data_rem == 0) { 715 /* short transfer or end of data */ 716 ustorage_fs_transfer_start(sc, 717 USTORAGE_FS_T_BBB_STATUS); 718 break; 719 } 720 /* Fallthrough */ 721 722 case USB_ST_SETUP: 723 tr_setup: 724 if (max_bulk > sc->sc_transfer.data_rem) { 725 max_bulk = sc->sc_transfer.data_rem; 726 } 727 if (sc->sc_transfer.data_error) { 728 sc->sc_transfer.data_error = 0; 729 usbd_xfer_set_stall(xfer); 730 } 731 732 usbd_xfer_set_frame_data(xfer, 0, sc->sc_dma_ptr, max_bulk); 733 usbd_transfer_submit(xfer); 734 break; 735 736 default: /* Error */ 737 if (error == USB_ERR_CANCELLED) { 738 break; 739 } 740 /* If the pipe is already stalled, don't do another stall */ 741 if (!usbd_xfer_is_stalled(xfer)) 742 sc->sc_transfer.data_error = 1; 743 744 /* try again */ 745 goto tr_setup; 746 } 747 } 748 749 static void 750 ustorage_fs_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 751 { 752 struct ustorage_fs_softc *sc = usbd_xfer_softc(xfer); 753 uint32_t max_bulk = usbd_xfer_max_len(xfer); 754 int actlen, sumlen; 755 756 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 757 758 DPRINTF("\n"); 759 760 switch (USB_GET_STATE(xfer)) { 761 case USB_ST_TRANSFERRED: 762 sc->sc_transfer.data_rem -= actlen; 763 sc->sc_transfer.data_ptr += actlen; 764 sc->sc_transfer.offset += actlen; 765 766 if (actlen != sumlen || sc->sc_transfer.data_rem == 0) { 767 /* short transfer or end of data */ 768 ustorage_fs_transfer_start(sc, 769 USTORAGE_FS_T_BBB_STATUS); 770 break; 771 } 772 case USB_ST_SETUP: 773 tr_setup: 774 if (max_bulk >= sc->sc_transfer.data_rem) { 775 max_bulk = sc->sc_transfer.data_rem; 776 if (sc->sc_transfer.data_short) 777 usbd_xfer_set_flag(xfer, USB_FORCE_SHORT_XFER); 778 else 779 usbd_xfer_clr_flag(xfer, USB_FORCE_SHORT_XFER); 780 } else 781 usbd_xfer_clr_flag(xfer, USB_FORCE_SHORT_XFER); 782 783 if (sc->sc_transfer.data_error) { 784 sc->sc_transfer.data_error = 0; 785 usbd_xfer_set_stall(xfer); 786 } 787 788 /* XXX copy data to DMA buffer */ 789 memcpy(sc->sc_dma_ptr, sc->sc_transfer.data_ptr, max_bulk); 790 791 usbd_xfer_set_frame_data(xfer, 0, sc->sc_dma_ptr, max_bulk); 792 usbd_transfer_submit(xfer); 793 break; 794 795 default: /* Error */ 796 if (error == USB_ERR_CANCELLED) { 797 break; 798 } 799 /* 800 * If the pipe is already stalled, don't do another 801 * stall 802 */ 803 if (!usbd_xfer_is_stalled(xfer)) 804 sc->sc_transfer.data_error = 1; 805 806 /* try again */ 807 goto tr_setup; 808 } 809 } 810 811 static void 812 ustorage_fs_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 813 { 814 struct ustorage_fs_softc *sc = usbd_xfer_softc(xfer); 815 816 DPRINTF("\n"); 817 818 switch (USB_GET_STATE(xfer)) { 819 case USB_ST_TRANSFERRED: 820 ustorage_fs_transfer_start(sc, USTORAGE_FS_T_BBB_COMMAND); 821 break; 822 823 case USB_ST_SETUP: 824 tr_setup: 825 USETDW(sc->sc_csw->dCSWSignature, CSWSIGNATURE); 826 USETDW(sc->sc_csw->dCSWDataResidue, sc->sc_transfer.data_rem); 827 828 if (sc->sc_transfer.data_error) { 829 sc->sc_transfer.data_error = 0; 830 usbd_xfer_set_stall(xfer); 831 } 832 usbd_xfer_set_frame_len(xfer, 0, 833 sizeof(ustorage_fs_bbb_csw_t)); 834 usbd_transfer_submit(xfer); 835 break; 836 837 default: 838 if (error == USB_ERR_CANCELLED) { 839 break; 840 } 841 /* If the pipe is already stalled, don't do another stall */ 842 if (!usbd_xfer_is_stalled(xfer)) 843 sc->sc_transfer.data_error = 1; 844 845 /* try again */ 846 goto tr_setup; 847 } 848 } 849 850 /* SCSI commands that we recognize */ 851 #define SC_FORMAT_UNIT 0x04 852 #define SC_INQUIRY 0x12 853 #define SC_MODE_SELECT_6 0x15 854 #define SC_MODE_SELECT_10 0x55 855 #define SC_MODE_SENSE_6 0x1a 856 #define SC_MODE_SENSE_10 0x5a 857 #define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e 858 #define SC_READ_6 0x08 859 #define SC_READ_10 0x28 860 #define SC_READ_12 0xa8 861 #define SC_READ_CAPACITY 0x25 862 #define SC_READ_FORMAT_CAPACITIES 0x23 863 #define SC_RELEASE 0x17 864 #define SC_REQUEST_SENSE 0x03 865 #define SC_RESERVE 0x16 866 #define SC_SEND_DIAGNOSTIC 0x1d 867 #define SC_START_STOP_UNIT 0x1b 868 #define SC_SYNCHRONIZE_CACHE 0x35 869 #define SC_TEST_UNIT_READY 0x00 870 #define SC_VERIFY 0x2f 871 #define SC_WRITE_6 0x0a 872 #define SC_WRITE_10 0x2a 873 #define SC_WRITE_12 0xaa 874 875 /* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ 876 #define SS_NO_SENSE 0 877 #define SS_COMMUNICATION_FAILURE 0x040800 878 #define SS_INVALID_COMMAND 0x052000 879 #define SS_INVALID_FIELD_IN_CDB 0x052400 880 #define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 881 #define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 882 #define SS_MEDIUM_NOT_PRESENT 0x023a00 883 #define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 884 #define SS_NOT_READY_TO_READY_TRANSITION 0x062800 885 #define SS_RESET_OCCURRED 0x062900 886 #define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 887 #define SS_UNRECOVERED_READ_ERROR 0x031100 888 #define SS_WRITE_ERROR 0x030c02 889 #define SS_WRITE_PROTECTED 0x072700 890 891 #define SK(x) ((uint8_t) ((x) >> 16)) /* Sense Key byte, etc. */ 892 #define ASC(x) ((uint8_t) ((x) >> 8)) 893 #define ASCQ(x) ((uint8_t) (x)) 894 895 /* Routines for unaligned data access */ 896 897 static uint16_t 898 get_be16(uint8_t *buf) 899 { 900 return ((uint16_t)buf[0] << 8) | ((uint16_t)buf[1]); 901 } 902 903 static uint32_t 904 get_be32(uint8_t *buf) 905 { 906 return ((uint32_t)buf[0] << 24) | ((uint32_t)buf[1] << 16) | 907 ((uint32_t)buf[2] << 8) | ((uint32_t)buf[3]); 908 } 909 910 static void 911 put_be16(uint8_t *buf, uint16_t val) 912 { 913 buf[0] = val >> 8; 914 buf[1] = val; 915 } 916 917 static void 918 put_be32(uint8_t *buf, uint32_t val) 919 { 920 buf[0] = val >> 24; 921 buf[1] = val >> 16; 922 buf[2] = val >> 8; 923 buf[3] = val & 0xff; 924 } 925 926 /*------------------------------------------------------------------------* 927 * ustorage_fs_verify 928 * 929 * Returns: 930 * 0: Success 931 * Else: Failure 932 *------------------------------------------------------------------------*/ 933 static uint8_t 934 ustorage_fs_verify(struct ustorage_fs_softc *sc) 935 { 936 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 937 uint32_t lba; 938 uint32_t vlen; 939 uint64_t file_offset; 940 uint64_t amount_left; 941 942 /* 943 * Get the starting Logical Block Address 944 */ 945 lba = get_be32(&sc->sc_cbw->CBWCDB[2]); 946 947 /* 948 * We allow DPO (Disable Page Out = don't save data in the cache) 949 * but we don't implement it. 950 */ 951 if ((sc->sc_cbw->CBWCDB[1] & ~0x10) != 0) { 952 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 953 return (1); 954 } 955 vlen = get_be16(&sc->sc_cbw->CBWCDB[7]); 956 if (vlen == 0) { 957 goto done; 958 } 959 /* No default reply */ 960 961 /* Prepare to carry out the file verify */ 962 amount_left = vlen; 963 amount_left <<= 9; 964 file_offset = lba; 965 file_offset <<= 9; 966 967 /* Range check */ 968 vlen += lba; 969 970 if ((vlen < lba) || 971 (vlen > currlun->num_sectors) || 972 (lba >= currlun->num_sectors)) { 973 currlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 974 return (1); 975 } 976 /* XXX TODO: verify that data is readable */ 977 done: 978 return (ustorage_fs_min_len(sc, 0, -1U)); 979 } 980 981 /*------------------------------------------------------------------------* 982 * ustorage_fs_inquiry 983 * 984 * Returns: 985 * 0: Success 986 * Else: Failure 987 *------------------------------------------------------------------------*/ 988 static uint8_t 989 ustorage_fs_inquiry(struct ustorage_fs_softc *sc) 990 { 991 uint8_t *buf = sc->sc_transfer.data_ptr; 992 993 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 994 995 if (!sc->sc_transfer.currlun) { 996 /* Unsupported LUNs are okay */ 997 memset(buf, 0, 36); 998 buf[0] = 0x7f; 999 /* Unsupported, no device - type */ 1000 return (ustorage_fs_min_len(sc, 36, -1U)); 1001 } 1002 memset(buf, 0, 8); 1003 /* Non - removable, direct - access device */ 1004 if (currlun->removable) 1005 buf[1] = 0x80; 1006 buf[2] = 2; 1007 /* ANSI SCSI level 2 */ 1008 buf[3] = 2; 1009 /* SCSI - 2 INQUIRY data format */ 1010 buf[4] = 31; 1011 /* Additional length */ 1012 /* No special options */ 1013 /* Copy in ID string */ 1014 memcpy(buf + 8, USTORAGE_FS_ID_STRING, 28); 1015 1016 #if (USTORAGE_QDATA_MAX < 36) 1017 #error "(USTORAGE_QDATA_MAX < 36)" 1018 #endif 1019 return (ustorage_fs_min_len(sc, 36, -1U)); 1020 } 1021 1022 /*------------------------------------------------------------------------* 1023 * ustorage_fs_request_sense 1024 * 1025 * Returns: 1026 * 0: Success 1027 * Else: Failure 1028 *------------------------------------------------------------------------*/ 1029 static uint8_t 1030 ustorage_fs_request_sense(struct ustorage_fs_softc *sc) 1031 { 1032 uint8_t *buf = sc->sc_transfer.data_ptr; 1033 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1034 uint32_t sd; 1035 uint32_t sdinfo; 1036 uint8_t valid; 1037 1038 /* 1039 * From the SCSI-2 spec., section 7.9 (Unit attention condition): 1040 * 1041 * If a REQUEST SENSE command is received from an initiator 1042 * with a pending unit attention condition (before the target 1043 * generates the contingent allegiance condition), then the 1044 * target shall either: 1045 * a) report any pending sense data and preserve the unit 1046 * attention condition on the logical unit, or, 1047 * b) report the unit attention condition, may discard any 1048 * pending sense data, and clear the unit attention 1049 * condition on the logical unit for that initiator. 1050 * 1051 * FSG normally uses option a); enable this code to use option b). 1052 */ 1053 #if 0 1054 if (currlun && currlun->unit_attention_data != SS_NO_SENSE) { 1055 currlun->sense_data = currlun->unit_attention_data; 1056 currlun->unit_attention_data = SS_NO_SENSE; 1057 } 1058 #endif 1059 1060 if (!currlun) { 1061 /* Unsupported LUNs are okay */ 1062 sd = SS_LOGICAL_UNIT_NOT_SUPPORTED; 1063 sdinfo = 0; 1064 valid = 0; 1065 } else { 1066 sd = currlun->sense_data; 1067 sdinfo = currlun->sense_data_info; 1068 valid = currlun->info_valid << 7; 1069 currlun->sense_data = SS_NO_SENSE; 1070 currlun->sense_data_info = 0; 1071 currlun->info_valid = 0; 1072 } 1073 1074 memset(buf, 0, 18); 1075 buf[0] = valid | 0x70; 1076 /* Valid, current error */ 1077 buf[2] = SK(sd); 1078 put_be32(&buf[3], sdinfo); 1079 /* Sense information */ 1080 buf[7] = 18 - 8; 1081 /* Additional sense length */ 1082 buf[12] = ASC(sd); 1083 buf[13] = ASCQ(sd); 1084 1085 #if (USTORAGE_QDATA_MAX < 18) 1086 #error "(USTORAGE_QDATA_MAX < 18)" 1087 #endif 1088 return (ustorage_fs_min_len(sc, 18, -1U)); 1089 } 1090 1091 /*------------------------------------------------------------------------* 1092 * ustorage_fs_read_capacity 1093 * 1094 * Returns: 1095 * 0: Success 1096 * Else: Failure 1097 *------------------------------------------------------------------------*/ 1098 static uint8_t 1099 ustorage_fs_read_capacity(struct ustorage_fs_softc *sc) 1100 { 1101 uint8_t *buf = sc->sc_transfer.data_ptr; 1102 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1103 uint32_t lba = get_be32(&sc->sc_cbw->CBWCDB[2]); 1104 uint8_t pmi = sc->sc_cbw->CBWCDB[8]; 1105 1106 /* Check the PMI and LBA fields */ 1107 if ((pmi > 1) || ((pmi == 0) && (lba != 0))) { 1108 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1109 return (1); 1110 } 1111 /* Max logical block */ 1112 put_be32(&buf[0], currlun->num_sectors - 1); 1113 /* Block length */ 1114 put_be32(&buf[4], 512); 1115 1116 #if (USTORAGE_QDATA_MAX < 8) 1117 #error "(USTORAGE_QDATA_MAX < 8)" 1118 #endif 1119 return (ustorage_fs_min_len(sc, 8, -1U)); 1120 } 1121 1122 /*------------------------------------------------------------------------* 1123 * ustorage_fs_mode_sense 1124 * 1125 * Returns: 1126 * 0: Success 1127 * Else: Failure 1128 *------------------------------------------------------------------------*/ 1129 static uint8_t 1130 ustorage_fs_mode_sense(struct ustorage_fs_softc *sc) 1131 { 1132 uint8_t *buf = sc->sc_transfer.data_ptr; 1133 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1134 uint8_t *buf0; 1135 uint16_t len; 1136 uint16_t limit; 1137 uint8_t mscmnd = sc->sc_cbw->CBWCDB[0]; 1138 uint8_t pc; 1139 uint8_t page_code; 1140 uint8_t changeable_values; 1141 uint8_t all_pages; 1142 1143 buf0 = buf; 1144 1145 if ((sc->sc_cbw->CBWCDB[1] & ~0x08) != 0) { 1146 /* Mask away DBD */ 1147 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1148 return (1); 1149 } 1150 pc = sc->sc_cbw->CBWCDB[2] >> 6; 1151 page_code = sc->sc_cbw->CBWCDB[2] & 0x3f; 1152 if (pc == 3) { 1153 currlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED; 1154 return (1); 1155 } 1156 changeable_values = (pc == 1); 1157 all_pages = (page_code == 0x3f); 1158 1159 /* 1160 * Write the mode parameter header. Fixed values are: default 1161 * medium type, no cache control (DPOFUA), and no block descriptors. 1162 * The only variable value is the WriteProtect bit. We will fill in 1163 * the mode data length later. 1164 */ 1165 memset(buf, 0, 8); 1166 if (mscmnd == SC_MODE_SENSE_6) { 1167 buf[2] = (currlun->read_only ? 0x80 : 0x00); 1168 /* WP, DPOFUA */ 1169 buf += 4; 1170 limit = 255; 1171 } else { 1172 /* SC_MODE_SENSE_10 */ 1173 buf[3] = (currlun->read_only ? 0x80 : 0x00); 1174 /* WP, DPOFUA */ 1175 buf += 8; 1176 limit = 65535; 1177 /* Should really be mod_data.buflen */ 1178 } 1179 1180 /* No block descriptors */ 1181 1182 /* 1183 * The mode pages, in numerical order. 1184 */ 1185 if ((page_code == 0x08) || all_pages) { 1186 buf[0] = 0x08; 1187 /* Page code */ 1188 buf[1] = 10; 1189 /* Page length */ 1190 memset(buf + 2, 0, 10); 1191 /* None of the fields are changeable */ 1192 1193 if (!changeable_values) { 1194 buf[2] = 0x04; 1195 /* Write cache enable, */ 1196 /* Read cache not disabled */ 1197 /* No cache retention priorities */ 1198 put_be16(&buf[4], 0xffff); 1199 /* Don 't disable prefetch */ 1200 /* Minimum prefetch = 0 */ 1201 put_be16(&buf[8], 0xffff); 1202 /* Maximum prefetch */ 1203 put_be16(&buf[10], 0xffff); 1204 /* Maximum prefetch ceiling */ 1205 } 1206 buf += 12; 1207 } 1208 /* 1209 * Check that a valid page was requested and the mode data length 1210 * isn't too long. 1211 */ 1212 len = buf - buf0; 1213 if (len > limit) { 1214 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1215 return (1); 1216 } 1217 /* Store the mode data length */ 1218 if (mscmnd == SC_MODE_SENSE_6) 1219 buf0[0] = len - 1; 1220 else 1221 put_be16(buf0, len - 2); 1222 1223 #if (USTORAGE_QDATA_MAX < 24) 1224 #error "(USTORAGE_QDATA_MAX < 24)" 1225 #endif 1226 return (ustorage_fs_min_len(sc, len, -1U)); 1227 } 1228 1229 /*------------------------------------------------------------------------* 1230 * ustorage_fs_start_stop 1231 * 1232 * Returns: 1233 * 0: Success 1234 * Else: Failure 1235 *------------------------------------------------------------------------*/ 1236 static uint8_t 1237 ustorage_fs_start_stop(struct ustorage_fs_softc *sc) 1238 { 1239 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1240 uint8_t loej; 1241 uint8_t start; 1242 uint8_t immed; 1243 1244 if (!currlun->removable) { 1245 currlun->sense_data = SS_INVALID_COMMAND; 1246 return (1); 1247 } 1248 immed = sc->sc_cbw->CBWCDB[1] & 0x01; 1249 loej = sc->sc_cbw->CBWCDB[4] & 0x02; 1250 start = sc->sc_cbw->CBWCDB[4] & 0x01; 1251 1252 if (immed || loej || start) { 1253 /* compile fix */ 1254 } 1255 return (0); 1256 } 1257 1258 /*------------------------------------------------------------------------* 1259 * ustorage_fs_prevent_allow 1260 * 1261 * Returns: 1262 * 0: Success 1263 * Else: Failure 1264 *------------------------------------------------------------------------*/ 1265 static uint8_t 1266 ustorage_fs_prevent_allow(struct ustorage_fs_softc *sc) 1267 { 1268 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1269 uint8_t prevent; 1270 1271 if (!currlun->removable) { 1272 currlun->sense_data = SS_INVALID_COMMAND; 1273 return (1); 1274 } 1275 prevent = sc->sc_cbw->CBWCDB[4] & 0x01; 1276 if ((sc->sc_cbw->CBWCDB[4] & ~0x01) != 0) { 1277 /* Mask away Prevent */ 1278 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1279 return (1); 1280 } 1281 if (currlun->prevent_medium_removal && !prevent) { 1282 //fsync_sub(currlun); 1283 } 1284 currlun->prevent_medium_removal = prevent; 1285 return (0); 1286 } 1287 1288 /*------------------------------------------------------------------------* 1289 * ustorage_fs_read_format_capacities 1290 * 1291 * Returns: 1292 * 0: Success 1293 * Else: Failure 1294 *------------------------------------------------------------------------*/ 1295 static uint8_t 1296 ustorage_fs_read_format_capacities(struct ustorage_fs_softc *sc) 1297 { 1298 uint8_t *buf = sc->sc_transfer.data_ptr; 1299 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1300 1301 buf[0] = buf[1] = buf[2] = 0; 1302 buf[3] = 8; 1303 /* Only the Current / Maximum Capacity Descriptor */ 1304 buf += 4; 1305 1306 /* Number of blocks */ 1307 put_be32(&buf[0], currlun->num_sectors); 1308 /* Block length */ 1309 put_be32(&buf[4], 512); 1310 /* Current capacity */ 1311 buf[4] = 0x02; 1312 1313 #if (USTORAGE_QDATA_MAX < 12) 1314 #error "(USTORAGE_QDATA_MAX < 12)" 1315 #endif 1316 return (ustorage_fs_min_len(sc, 12, -1U)); 1317 } 1318 1319 /*------------------------------------------------------------------------* 1320 * ustorage_fs_mode_select 1321 * 1322 * Return values: 1323 * 0: Success 1324 * Else: Failure 1325 *------------------------------------------------------------------------*/ 1326 static uint8_t 1327 ustorage_fs_mode_select(struct ustorage_fs_softc *sc) 1328 { 1329 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1330 1331 /* We don't support MODE SELECT */ 1332 currlun->sense_data = SS_INVALID_COMMAND; 1333 return (1); 1334 } 1335 1336 /*------------------------------------------------------------------------* 1337 * ustorage_fs_synchronize_cache 1338 * 1339 * Return values: 1340 * 0: Success 1341 * Else: Failure 1342 *------------------------------------------------------------------------*/ 1343 static uint8_t 1344 ustorage_fs_synchronize_cache(struct ustorage_fs_softc *sc) 1345 { 1346 #if 0 1347 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1348 uint8_t rc; 1349 1350 /* 1351 * We ignore the requested LBA and write out all dirty data buffers. 1352 */ 1353 rc = 0; 1354 if (rc) { 1355 currlun->sense_data = SS_WRITE_ERROR; 1356 } 1357 #endif 1358 return (0); 1359 } 1360 1361 /*------------------------------------------------------------------------* 1362 * ustorage_fs_read - read data from disk 1363 * 1364 * Return values: 1365 * 0: Success 1366 * Else: Failure 1367 *------------------------------------------------------------------------*/ 1368 static uint8_t 1369 ustorage_fs_read(struct ustorage_fs_softc *sc) 1370 { 1371 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1372 uint64_t file_offset; 1373 uint32_t lba; 1374 uint32_t len; 1375 1376 /* 1377 * Get the starting Logical Block Address and check that it's not 1378 * too big 1379 */ 1380 if (sc->sc_cbw->CBWCDB[0] == SC_READ_6) { 1381 lba = (((uint32_t)sc->sc_cbw->CBWCDB[1]) << 16) | 1382 get_be16(&sc->sc_cbw->CBWCDB[2]); 1383 } else { 1384 lba = get_be32(&sc->sc_cbw->CBWCDB[2]); 1385 1386 /* 1387 * We allow DPO (Disable Page Out = don't save data in the 1388 * cache) and FUA (Force Unit Access = don't read from the 1389 * cache), but we don't implement them. 1390 */ 1391 if ((sc->sc_cbw->CBWCDB[1] & ~0x18) != 0) { 1392 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1393 return (1); 1394 } 1395 } 1396 len = sc->sc_transfer.data_rem >> 9; 1397 len += lba; 1398 1399 if ((len < lba) || 1400 (len > currlun->num_sectors) || 1401 (lba >= currlun->num_sectors)) { 1402 currlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1403 return (1); 1404 } 1405 file_offset = lba; 1406 file_offset <<= 9; 1407 1408 sc->sc_transfer.data_ptr = currlun->memory_image + file_offset; 1409 1410 return (0); 1411 } 1412 1413 /*------------------------------------------------------------------------* 1414 * ustorage_fs_write - write data to disk 1415 * 1416 * Return values: 1417 * 0: Success 1418 * Else: Failure 1419 *------------------------------------------------------------------------*/ 1420 static uint8_t 1421 ustorage_fs_write(struct ustorage_fs_softc *sc) 1422 { 1423 struct ustorage_fs_lun *currlun = sc->sc_transfer.currlun; 1424 uint64_t file_offset; 1425 uint32_t lba; 1426 uint32_t len; 1427 1428 if (currlun->read_only) { 1429 currlun->sense_data = SS_WRITE_PROTECTED; 1430 return (1); 1431 } 1432 /* XXX clear SYNC */ 1433 1434 /* 1435 * Get the starting Logical Block Address and check that it's not 1436 * too big. 1437 */ 1438 if (sc->sc_cbw->CBWCDB[0] == SC_WRITE_6) 1439 lba = (((uint32_t)sc->sc_cbw->CBWCDB[1]) << 16) | 1440 get_be16(&sc->sc_cbw->CBWCDB[2]); 1441 else { 1442 lba = get_be32(&sc->sc_cbw->CBWCDB[2]); 1443 1444 /* 1445 * We allow DPO (Disable Page Out = don't save data in the 1446 * cache) and FUA (Force Unit Access = write directly to the 1447 * medium). We don't implement DPO; we implement FUA by 1448 * performing synchronous output. 1449 */ 1450 if ((sc->sc_cbw->CBWCDB[1] & ~0x18) != 0) { 1451 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1452 return (1); 1453 } 1454 if (sc->sc_cbw->CBWCDB[1] & 0x08) { 1455 /* FUA */ 1456 /* XXX set SYNC flag here */ 1457 } 1458 } 1459 1460 len = sc->sc_transfer.data_rem >> 9; 1461 len += lba; 1462 1463 if ((len < lba) || 1464 (len > currlun->num_sectors) || 1465 (lba >= currlun->num_sectors)) { 1466 currlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; 1467 return (1); 1468 } 1469 file_offset = lba; 1470 file_offset <<= 9; 1471 1472 sc->sc_transfer.data_ptr = currlun->memory_image + file_offset; 1473 1474 return (0); 1475 } 1476 1477 /*------------------------------------------------------------------------* 1478 * ustorage_fs_min_len 1479 * 1480 * Return values: 1481 * 0: Success 1482 * Else: Failure 1483 *------------------------------------------------------------------------*/ 1484 static uint8_t 1485 ustorage_fs_min_len(struct ustorage_fs_softc *sc, uint32_t len, uint32_t mask) 1486 { 1487 if (len != sc->sc_transfer.data_rem) { 1488 1489 if (sc->sc_transfer.cbw_dir == DIR_READ) { 1490 /* 1491 * there must be something wrong about this SCSI 1492 * command 1493 */ 1494 sc->sc_csw->bCSWStatus = CSWSTATUS_PHASE; 1495 return (1); 1496 } 1497 /* compute the minimum length */ 1498 1499 if (sc->sc_transfer.data_rem > len) { 1500 /* data ends prematurely */ 1501 sc->sc_transfer.data_rem = len; 1502 sc->sc_transfer.data_short = 1; 1503 } 1504 /* check length alignment */ 1505 1506 if (sc->sc_transfer.data_rem & ~mask) { 1507 /* data ends prematurely */ 1508 sc->sc_transfer.data_rem &= mask; 1509 sc->sc_transfer.data_short = 1; 1510 } 1511 } 1512 return (0); 1513 } 1514 1515 /*------------------------------------------------------------------------* 1516 * ustorage_fs_check_cmd - check command routine 1517 * 1518 * Check whether the command is properly formed and whether its data 1519 * size and direction agree with the values we already have. 1520 * 1521 * Return values: 1522 * 0: Success 1523 * Else: Failure 1524 *------------------------------------------------------------------------*/ 1525 static uint8_t 1526 ustorage_fs_check_cmd(struct ustorage_fs_softc *sc, uint8_t min_cmd_size, 1527 uint16_t mask, uint8_t needs_medium) 1528 { 1529 struct ustorage_fs_lun *currlun; 1530 uint8_t lun = (sc->sc_cbw->CBWCDB[1] >> 5); 1531 uint8_t i; 1532 1533 /* Verify the length of the command itself */ 1534 if (min_cmd_size > sc->sc_transfer.cmd_len) { 1535 DPRINTF("%u > %u\n", 1536 min_cmd_size, sc->sc_transfer.cmd_len); 1537 sc->sc_csw->bCSWStatus = CSWSTATUS_PHASE; 1538 return (1); 1539 } 1540 /* Mask away the LUN */ 1541 sc->sc_cbw->CBWCDB[1] &= 0x1f; 1542 1543 /* Check if LUN is correct */ 1544 if (lun != sc->sc_transfer.lun) { 1545 1546 } 1547 /* Check the LUN */ 1548 if (sc->sc_transfer.lun <= sc->sc_last_lun) { 1549 sc->sc_transfer.currlun = currlun = 1550 sc->sc_lun + sc->sc_transfer.lun; 1551 if (sc->sc_cbw->CBWCDB[0] != SC_REQUEST_SENSE) { 1552 currlun->sense_data = SS_NO_SENSE; 1553 currlun->sense_data_info = 0; 1554 currlun->info_valid = 0; 1555 } 1556 /* 1557 * If a unit attention condition exists, only INQUIRY 1558 * and REQUEST SENSE commands are allowed. Anything 1559 * else must fail! 1560 */ 1561 if ((currlun->unit_attention_data != SS_NO_SENSE) && 1562 (sc->sc_cbw->CBWCDB[0] != SC_INQUIRY) && 1563 (sc->sc_cbw->CBWCDB[0] != SC_REQUEST_SENSE)) { 1564 currlun->sense_data = currlun->unit_attention_data; 1565 currlun->unit_attention_data = SS_NO_SENSE; 1566 return (1); 1567 } 1568 } else { 1569 sc->sc_transfer.currlun = currlun = NULL; 1570 1571 /* 1572 * INQUIRY and REQUEST SENSE commands are explicitly allowed 1573 * to use unsupported LUNs; all others may not. 1574 */ 1575 if ((sc->sc_cbw->CBWCDB[0] != SC_INQUIRY) && 1576 (sc->sc_cbw->CBWCDB[0] != SC_REQUEST_SENSE)) { 1577 return (1); 1578 } 1579 } 1580 1581 /* 1582 * Check that only command bytes listed in the mask are 1583 * non-zero. 1584 */ 1585 for (i = 0; i != min_cmd_size; i++) { 1586 if (sc->sc_cbw->CBWCDB[i] && !(mask & (1UL << i))) { 1587 if (currlun) { 1588 currlun->sense_data = SS_INVALID_FIELD_IN_CDB; 1589 } 1590 return (1); 1591 } 1592 } 1593 1594 /* 1595 * If the medium isn't mounted and the command needs to access 1596 * it, return an error. 1597 */ 1598 if (currlun && (!currlun->memory_image) && needs_medium) { 1599 currlun->sense_data = SS_MEDIUM_NOT_PRESENT; 1600 return (1); 1601 } 1602 return (0); 1603 } 1604 1605 /*------------------------------------------------------------------------* 1606 * ustorage_fs_do_cmd - do command 1607 * 1608 * Return values: 1609 * 0: Success 1610 * Else: Failure 1611 *------------------------------------------------------------------------*/ 1612 static uint8_t 1613 ustorage_fs_do_cmd(struct ustorage_fs_softc *sc) 1614 { 1615 uint8_t error = 1; 1616 uint8_t i; 1617 uint32_t temp; 1618 const uint32_t mask9 = (0xFFFFFFFFUL >> 9) << 9; 1619 1620 /* set default data transfer pointer */ 1621 sc->sc_transfer.data_ptr = sc->sc_qdata; 1622 1623 DPRINTF("cmd_data[0]=0x%02x, data_rem=0x%08x\n", 1624 sc->sc_cbw->CBWCDB[0], sc->sc_transfer.data_rem); 1625 1626 switch (sc->sc_cbw->CBWCDB[0]) { 1627 case SC_INQUIRY: 1628 sc->sc_transfer.cmd_dir = DIR_WRITE; 1629 error = ustorage_fs_min_len(sc, sc->sc_cbw->CBWCDB[4], -1U); 1630 if (error) { 1631 break; 1632 } 1633 error = ustorage_fs_check_cmd(sc, 6, 1634 (1UL << 4) | 1, 0); 1635 if (error) { 1636 break; 1637 } 1638 error = ustorage_fs_inquiry(sc); 1639 1640 break; 1641 1642 case SC_MODE_SELECT_6: 1643 sc->sc_transfer.cmd_dir = DIR_READ; 1644 error = ustorage_fs_min_len(sc, sc->sc_cbw->CBWCDB[4], -1U); 1645 if (error) { 1646 break; 1647 } 1648 error = ustorage_fs_check_cmd(sc, 6, 1649 (1UL << 1) | (1UL << 4) | 1, 0); 1650 if (error) { 1651 break; 1652 } 1653 error = ustorage_fs_mode_select(sc); 1654 1655 break; 1656 1657 case SC_MODE_SELECT_10: 1658 sc->sc_transfer.cmd_dir = DIR_READ; 1659 error = ustorage_fs_min_len(sc, 1660 get_be16(&sc->sc_cbw->CBWCDB[7]), -1U); 1661 if (error) { 1662 break; 1663 } 1664 error = ustorage_fs_check_cmd(sc, 10, 1665 (1UL << 1) | (3UL << 7) | 1, 0); 1666 if (error) { 1667 break; 1668 } 1669 error = ustorage_fs_mode_select(sc); 1670 1671 break; 1672 1673 case SC_MODE_SENSE_6: 1674 sc->sc_transfer.cmd_dir = DIR_WRITE; 1675 error = ustorage_fs_min_len(sc, sc->sc_cbw->CBWCDB[4], -1U); 1676 if (error) { 1677 break; 1678 } 1679 error = ustorage_fs_check_cmd(sc, 6, 1680 (1UL << 1) | (1UL << 2) | (1UL << 4) | 1, 0); 1681 if (error) { 1682 break; 1683 } 1684 error = ustorage_fs_mode_sense(sc); 1685 1686 break; 1687 1688 case SC_MODE_SENSE_10: 1689 sc->sc_transfer.cmd_dir = DIR_WRITE; 1690 error = ustorage_fs_min_len(sc, 1691 get_be16(&sc->sc_cbw->CBWCDB[7]), -1U); 1692 if (error) { 1693 break; 1694 } 1695 error = ustorage_fs_check_cmd(sc, 10, 1696 (1UL << 1) | (1UL << 2) | (3UL << 7) | 1, 0); 1697 if (error) { 1698 break; 1699 } 1700 error = ustorage_fs_mode_sense(sc); 1701 1702 break; 1703 1704 case SC_PREVENT_ALLOW_MEDIUM_REMOVAL: 1705 error = ustorage_fs_min_len(sc, 0, -1U); 1706 if (error) { 1707 break; 1708 } 1709 error = ustorage_fs_check_cmd(sc, 6, 1710 (1UL << 4) | 1, 0); 1711 if (error) { 1712 break; 1713 } 1714 error = ustorage_fs_prevent_allow(sc); 1715 1716 break; 1717 1718 case SC_READ_6: 1719 i = sc->sc_cbw->CBWCDB[4]; 1720 sc->sc_transfer.cmd_dir = DIR_WRITE; 1721 temp = ((i == 0) ? 256UL : i); 1722 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1723 if (error) { 1724 break; 1725 } 1726 error = ustorage_fs_check_cmd(sc, 6, 1727 (7UL << 1) | (1UL << 4) | 1, 1); 1728 if (error) { 1729 break; 1730 } 1731 error = ustorage_fs_read(sc); 1732 1733 break; 1734 1735 case SC_READ_10: 1736 sc->sc_transfer.cmd_dir = DIR_WRITE; 1737 temp = get_be16(&sc->sc_cbw->CBWCDB[7]); 1738 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1739 if (error) { 1740 break; 1741 } 1742 error = ustorage_fs_check_cmd(sc, 10, 1743 (1UL << 1) | (0xfUL << 2) | (3UL << 7) | 1, 1); 1744 if (error) { 1745 break; 1746 } 1747 error = ustorage_fs_read(sc); 1748 1749 break; 1750 1751 case SC_READ_12: 1752 sc->sc_transfer.cmd_dir = DIR_WRITE; 1753 temp = get_be32(&sc->sc_cbw->CBWCDB[6]); 1754 if (temp >= (1UL << (32 - 9))) { 1755 /* numerical overflow */ 1756 sc->sc_csw->bCSWStatus = CSWSTATUS_FAILED; 1757 error = 1; 1758 break; 1759 } 1760 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1761 if (error) { 1762 break; 1763 } 1764 error = ustorage_fs_check_cmd(sc, 12, 1765 (1UL << 1) | (0xfUL << 2) | (0xfUL << 6) | 1, 1); 1766 if (error) { 1767 break; 1768 } 1769 error = ustorage_fs_read(sc); 1770 1771 break; 1772 1773 case SC_READ_CAPACITY: 1774 sc->sc_transfer.cmd_dir = DIR_WRITE; 1775 error = ustorage_fs_check_cmd(sc, 10, 1776 (0xfUL << 2) | (1UL << 8) | 1, 1); 1777 if (error) { 1778 break; 1779 } 1780 error = ustorage_fs_read_capacity(sc); 1781 1782 break; 1783 1784 case SC_READ_FORMAT_CAPACITIES: 1785 sc->sc_transfer.cmd_dir = DIR_WRITE; 1786 error = ustorage_fs_min_len(sc, 1787 get_be16(&sc->sc_cbw->CBWCDB[7]), -1U); 1788 if (error) { 1789 break; 1790 } 1791 error = ustorage_fs_check_cmd(sc, 10, 1792 (3UL << 7) | 1, 1); 1793 if (error) { 1794 break; 1795 } 1796 error = ustorage_fs_read_format_capacities(sc); 1797 1798 break; 1799 1800 case SC_REQUEST_SENSE: 1801 sc->sc_transfer.cmd_dir = DIR_WRITE; 1802 error = ustorage_fs_min_len(sc, sc->sc_cbw->CBWCDB[4], -1U); 1803 if (error) { 1804 break; 1805 } 1806 error = ustorage_fs_check_cmd(sc, 6, 1807 (1UL << 4) | 1, 0); 1808 if (error) { 1809 break; 1810 } 1811 error = ustorage_fs_request_sense(sc); 1812 1813 break; 1814 1815 case SC_START_STOP_UNIT: 1816 error = ustorage_fs_min_len(sc, 0, -1U); 1817 if (error) { 1818 break; 1819 } 1820 error = ustorage_fs_check_cmd(sc, 6, 1821 (1UL << 1) | (1UL << 4) | 1, 0); 1822 if (error) { 1823 break; 1824 } 1825 error = ustorage_fs_start_stop(sc); 1826 1827 break; 1828 1829 case SC_SYNCHRONIZE_CACHE: 1830 error = ustorage_fs_min_len(sc, 0, -1U); 1831 if (error) { 1832 break; 1833 } 1834 error = ustorage_fs_check_cmd(sc, 10, 1835 (0xfUL << 2) | (3UL << 7) | 1, 1); 1836 if (error) { 1837 break; 1838 } 1839 error = ustorage_fs_synchronize_cache(sc); 1840 1841 break; 1842 1843 case SC_TEST_UNIT_READY: 1844 error = ustorage_fs_min_len(sc, 0, -1U); 1845 if (error) { 1846 break; 1847 } 1848 error = ustorage_fs_check_cmd(sc, 6, 1849 0 | 1, 1); 1850 break; 1851 1852 /* 1853 * Although optional, this command is used by MS-Windows. 1854 * We support a minimal version: BytChk must be 0. 1855 */ 1856 case SC_VERIFY: 1857 error = ustorage_fs_min_len(sc, 0, -1U); 1858 if (error) { 1859 break; 1860 } 1861 error = ustorage_fs_check_cmd(sc, 10, 1862 (1UL << 1) | (0xfUL << 2) | (3UL << 7) | 1, 1); 1863 if (error) { 1864 break; 1865 } 1866 error = ustorage_fs_verify(sc); 1867 1868 break; 1869 1870 case SC_WRITE_6: 1871 i = sc->sc_cbw->CBWCDB[4]; 1872 sc->sc_transfer.cmd_dir = DIR_READ; 1873 temp = ((i == 0) ? 256UL : i); 1874 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1875 if (error) { 1876 break; 1877 } 1878 error = ustorage_fs_check_cmd(sc, 6, 1879 (7UL << 1) | (1UL << 4) | 1, 1); 1880 if (error) { 1881 break; 1882 } 1883 error = ustorage_fs_write(sc); 1884 1885 break; 1886 1887 case SC_WRITE_10: 1888 sc->sc_transfer.cmd_dir = DIR_READ; 1889 temp = get_be16(&sc->sc_cbw->CBWCDB[7]); 1890 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1891 if (error) { 1892 break; 1893 } 1894 error = ustorage_fs_check_cmd(sc, 10, 1895 (1UL << 1) | (0xfUL << 2) | (3UL << 7) | 1, 1); 1896 if (error) { 1897 break; 1898 } 1899 error = ustorage_fs_write(sc); 1900 1901 break; 1902 1903 case SC_WRITE_12: 1904 sc->sc_transfer.cmd_dir = DIR_READ; 1905 temp = get_be32(&sc->sc_cbw->CBWCDB[6]); 1906 if (temp > (mask9 >> 9)) { 1907 /* numerical overflow */ 1908 sc->sc_csw->bCSWStatus = CSWSTATUS_FAILED; 1909 error = 1; 1910 break; 1911 } 1912 error = ustorage_fs_min_len(sc, temp << 9, mask9); 1913 if (error) { 1914 break; 1915 } 1916 error = ustorage_fs_check_cmd(sc, 12, 1917 (1UL << 1) | (0xfUL << 2) | (0xfUL << 6) | 1, 1); 1918 if (error) { 1919 break; 1920 } 1921 error = ustorage_fs_write(sc); 1922 1923 break; 1924 1925 /* 1926 * Some mandatory commands that we recognize but don't 1927 * implement. They don't mean much in this setting. 1928 * It's left as an exercise for anyone interested to 1929 * implement RESERVE and RELEASE in terms of Posix 1930 * locks. 1931 */ 1932 case SC_FORMAT_UNIT: 1933 case SC_RELEASE: 1934 case SC_RESERVE: 1935 case SC_SEND_DIAGNOSTIC: 1936 /* Fallthrough */ 1937 1938 default: 1939 error = ustorage_fs_min_len(sc, 0, -1U); 1940 if (error) { 1941 break; 1942 } 1943 error = ustorage_fs_check_cmd(sc, sc->sc_transfer.cmd_len, 1944 0xff, 0); 1945 if (error) { 1946 break; 1947 } 1948 sc->sc_transfer.currlun->sense_data = 1949 SS_INVALID_COMMAND; 1950 error = 1; 1951 1952 break; 1953 } 1954 return (error); 1955 } 1956