1 #include <sys/cdefs.h> 2 __FBSDID("$FreeBSD$"); 3 4 /*- 5 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 6 * 7 * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>, 8 * Nick Hibma <n_hibma@FreeBSD.org> 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $ 34 */ 35 36 /* Also already merged from NetBSD: 37 * $NetBSD: umass.c,v 1.67 2001/11/25 19:05:22 augustss Exp $ 38 * $NetBSD: umass.c,v 1.90 2002/11/04 19:17:33 pooka Exp $ 39 * $NetBSD: umass.c,v 1.108 2003/11/07 17:03:25 wiz Exp $ 40 * $NetBSD: umass.c,v 1.109 2003/12/04 13:57:31 keihan Exp $ 41 */ 42 43 /* 44 * Universal Serial Bus Mass Storage Class specs: 45 * http://www.usb.org/developers/devclass_docs/usb_msc_overview_1.2.pdf 46 * http://www.usb.org/developers/devclass_docs/usbmassbulk_10.pdf 47 * http://www.usb.org/developers/devclass_docs/usb_msc_cbi_1.1.pdf 48 * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf 49 */ 50 51 /* 52 * Ported to NetBSD by Lennart Augustsson <augustss@NetBSD.org>. 53 * Parts of the code written by Jason R. Thorpe <thorpej@shagadelic.org>. 54 */ 55 56 /* 57 * The driver handles 3 Wire Protocols 58 * - Command/Bulk/Interrupt (CBI) 59 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 60 * - Mass Storage Bulk-Only (BBB) 61 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 62 * 63 * Over these wire protocols it handles the following command protocols 64 * - SCSI 65 * - UFI (floppy command set) 66 * - 8070i (ATAPI) 67 * 68 * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The 69 * sc->sc_transform method is used to convert the commands into the appropriate 70 * format (if at all necessary). For example, UFI requires all commands to be 71 * 12 bytes in length amongst other things. 72 * 73 * The source code below is marked and can be split into a number of pieces 74 * (in this order): 75 * 76 * - probe/attach/detach 77 * - generic transfer routines 78 * - BBB 79 * - CBI 80 * - CBI_I (in addition to functions from CBI) 81 * - CAM (Common Access Method) 82 * - SCSI 83 * - UFI 84 * - 8070i (ATAPI) 85 * 86 * The protocols are implemented using a state machine, for the transfers as 87 * well as for the resets. The state machine is contained in umass_t_*_callback. 88 * The state machine is started through either umass_command_start() or 89 * umass_reset(). 90 * 91 * The reason for doing this is a) CAM performs a lot better this way and b) it 92 * avoids using tsleep from interrupt context (for example after a failed 93 * transfer). 94 */ 95 96 /* 97 * The SCSI related part of this driver has been derived from the 98 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@FreeBSD.org). 99 * 100 * The CAM layer uses so called actions which are messages sent to the host 101 * adapter for completion. The actions come in through umass_cam_action. The 102 * appropriate block of routines is called depending on the transport protocol 103 * in use. When the transfer has finished, these routines call 104 * umass_cam_cb again to complete the CAM command. 105 */ 106 107 #include <sys/stdint.h> 108 #include <sys/stddef.h> 109 #include <sys/param.h> 110 #include <sys/queue.h> 111 #include <sys/types.h> 112 #include <sys/systm.h> 113 #include <sys/kernel.h> 114 #include <sys/bus.h> 115 #include <sys/module.h> 116 #include <sys/lock.h> 117 #include <sys/mutex.h> 118 #include <sys/condvar.h> 119 #include <sys/sysctl.h> 120 #include <sys/sx.h> 121 #include <sys/unistd.h> 122 #include <sys/callout.h> 123 #include <sys/malloc.h> 124 #include <sys/priv.h> 125 126 #include <dev/usb/usb.h> 127 #include <dev/usb/usbdi.h> 128 #include <dev/usb/usbdi_util.h> 129 #include "usbdevs.h" 130 131 #include <dev/usb/quirk/usb_quirk.h> 132 133 #include <cam/cam.h> 134 #include <cam/cam_ccb.h> 135 #include <cam/cam_sim.h> 136 #include <cam/cam_xpt_sim.h> 137 #include <cam/scsi/scsi_all.h> 138 #include <cam/scsi/scsi_da.h> 139 140 #include <cam/cam_periph.h> 141 142 #ifdef USB_DEBUG 143 #define DIF(m, x) \ 144 do { \ 145 if (umass_debug & (m)) { x ; } \ 146 } while (0) 147 148 #define DPRINTF(sc, m, fmt, ...) \ 149 do { \ 150 if (umass_debug & (m)) { \ 151 printf("%s:%s: " fmt, \ 152 (sc) ? (const char *)(sc)->sc_name : \ 153 (const char *)"umassX", \ 154 __FUNCTION__ ,## __VA_ARGS__); \ 155 } \ 156 } while (0) 157 158 #define UDMASS_GEN 0x00010000 /* general */ 159 #define UDMASS_SCSI 0x00020000 /* scsi */ 160 #define UDMASS_UFI 0x00040000 /* ufi command set */ 161 #define UDMASS_ATAPI 0x00080000 /* 8070i command set */ 162 #define UDMASS_CMD (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI) 163 #define UDMASS_USB 0x00100000 /* USB general */ 164 #define UDMASS_BBB 0x00200000 /* Bulk-Only transfers */ 165 #define UDMASS_CBI 0x00400000 /* CBI transfers */ 166 #define UDMASS_WIRE (UDMASS_BBB|UDMASS_CBI) 167 #define UDMASS_ALL 0xffff0000 /* all of the above */ 168 static int umass_debug; 169 static int umass_throttle; 170 171 static SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW, 0, "USB umass"); 172 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RWTUN, 173 &umass_debug, 0, "umass debug level"); 174 SYSCTL_INT(_hw_usb_umass, OID_AUTO, throttle, CTLFLAG_RWTUN, 175 &umass_throttle, 0, "Forced delay between commands in milliseconds"); 176 #else 177 #define DIF(...) do { } while (0) 178 #define DPRINTF(...) do { } while (0) 179 #endif 180 181 #define UMASS_BULK_SIZE (1 << 17) 182 #define UMASS_CBI_DIAGNOSTIC_CMDLEN 12 /* bytes */ 183 #define UMASS_MAX_CMDLEN MAX(12, CAM_MAX_CDBLEN) /* bytes */ 184 185 /* USB transfer definitions */ 186 187 #define UMASS_T_BBB_RESET1 0 /* Bulk-Only */ 188 #define UMASS_T_BBB_RESET2 1 189 #define UMASS_T_BBB_RESET3 2 190 #define UMASS_T_BBB_COMMAND 3 191 #define UMASS_T_BBB_DATA_READ 4 192 #define UMASS_T_BBB_DATA_RD_CS 5 193 #define UMASS_T_BBB_DATA_WRITE 6 194 #define UMASS_T_BBB_DATA_WR_CS 7 195 #define UMASS_T_BBB_STATUS 8 196 #define UMASS_T_BBB_MAX 9 197 198 #define UMASS_T_CBI_RESET1 0 /* CBI */ 199 #define UMASS_T_CBI_RESET2 1 200 #define UMASS_T_CBI_RESET3 2 201 #define UMASS_T_CBI_COMMAND 3 202 #define UMASS_T_CBI_DATA_READ 4 203 #define UMASS_T_CBI_DATA_RD_CS 5 204 #define UMASS_T_CBI_DATA_WRITE 6 205 #define UMASS_T_CBI_DATA_WR_CS 7 206 #define UMASS_T_CBI_STATUS 8 207 #define UMASS_T_CBI_RESET4 9 208 #define UMASS_T_CBI_MAX 10 209 210 #define UMASS_T_MAX MAX(UMASS_T_CBI_MAX, UMASS_T_BBB_MAX) 211 212 /* Generic definitions */ 213 214 /* Direction for transfer */ 215 #define DIR_NONE 0 216 #define DIR_IN 1 217 #define DIR_OUT 2 218 219 /* device name */ 220 #define DEVNAME "umass" 221 #define DEVNAME_SIM "umass-sim" 222 223 /* Approximate maximum transfer speeds (assumes 33% overhead). */ 224 #define UMASS_FULL_TRANSFER_SPEED 1000 225 #define UMASS_HIGH_TRANSFER_SPEED 40000 226 #define UMASS_SUPER_TRANSFER_SPEED 400000 227 #define UMASS_FLOPPY_TRANSFER_SPEED 20 228 229 #define UMASS_TIMEOUT 5000 /* ms */ 230 231 /* CAM specific definitions */ 232 233 #define UMASS_SCSIID_MAX 1 /* maximum number of drives expected */ 234 #define UMASS_SCSIID_HOST UMASS_SCSIID_MAX 235 236 /* Bulk-Only features */ 237 238 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 239 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 240 241 /* Command Block Wrapper */ 242 typedef struct { 243 uDWord dCBWSignature; 244 #define CBWSIGNATURE 0x43425355 245 uDWord dCBWTag; 246 uDWord dCBWDataTransferLength; 247 uByte bCBWFlags; 248 #define CBWFLAGS_OUT 0x00 249 #define CBWFLAGS_IN 0x80 250 uByte bCBWLUN; 251 uByte bCDBLength; 252 #define CBWCDBLENGTH 16 253 uByte CBWCDB[CBWCDBLENGTH]; 254 } __packed umass_bbb_cbw_t; 255 256 #define UMASS_BBB_CBW_SIZE 31 257 258 /* Command Status Wrapper */ 259 typedef struct { 260 uDWord dCSWSignature; 261 #define CSWSIGNATURE 0x53425355 262 #define CSWSIGNATURE_IMAGINATION_DBX1 0x43425355 263 #define CSWSIGNATURE_OLYMPUS_C1 0x55425355 264 uDWord dCSWTag; 265 uDWord dCSWDataResidue; 266 uByte bCSWStatus; 267 #define CSWSTATUS_GOOD 0x0 268 #define CSWSTATUS_FAILED 0x1 269 #define CSWSTATUS_PHASE 0x2 270 } __packed umass_bbb_csw_t; 271 272 #define UMASS_BBB_CSW_SIZE 13 273 274 /* CBI features */ 275 276 #define UR_CBI_ADSC 0x00 277 278 typedef union { 279 struct { 280 uint8_t type; 281 #define IDB_TYPE_CCI 0x00 282 uint8_t value; 283 #define IDB_VALUE_PASS 0x00 284 #define IDB_VALUE_FAIL 0x01 285 #define IDB_VALUE_PHASE 0x02 286 #define IDB_VALUE_PERSISTENT 0x03 287 #define IDB_VALUE_STATUS_MASK 0x03 288 } __packed common; 289 290 struct { 291 uint8_t asc; 292 uint8_t ascq; 293 } __packed ufi; 294 } __packed umass_cbi_sbl_t; 295 296 struct umass_softc; /* see below */ 297 298 typedef void (umass_callback_t)(struct umass_softc *sc, union ccb *ccb, 299 uint32_t residue, uint8_t status); 300 301 #define STATUS_CMD_OK 0 /* everything ok */ 302 #define STATUS_CMD_UNKNOWN 1 /* will have to fetch sense */ 303 #define STATUS_CMD_FAILED 2 /* transfer was ok, command failed */ 304 #define STATUS_WIRE_FAILED 3 /* couldn't even get command across */ 305 306 typedef uint8_t (umass_transform_t)(struct umass_softc *sc, uint8_t *cmd_ptr, 307 uint8_t cmd_len); 308 309 /* Wire and command protocol */ 310 #define UMASS_PROTO_BBB 0x0001 /* USB wire protocol */ 311 #define UMASS_PROTO_CBI 0x0002 312 #define UMASS_PROTO_CBI_I 0x0004 313 #define UMASS_PROTO_WIRE 0x00ff /* USB wire protocol mask */ 314 #define UMASS_PROTO_SCSI 0x0100 /* command protocol */ 315 #define UMASS_PROTO_ATAPI 0x0200 316 #define UMASS_PROTO_UFI 0x0400 317 #define UMASS_PROTO_RBC 0x0800 318 #define UMASS_PROTO_COMMAND 0xff00 /* command protocol mask */ 319 320 /* Device specific quirks */ 321 #define NO_QUIRKS 0x0000 322 /* 323 * The drive does not support Test Unit Ready. Convert to Start Unit 324 */ 325 #define NO_TEST_UNIT_READY 0x0001 326 /* 327 * The drive does not reset the Unit Attention state after REQUEST 328 * SENSE has been sent. The INQUIRY command does not reset the UA 329 * either, and so CAM runs in circles trying to retrieve the initial 330 * INQUIRY data. 331 */ 332 #define RS_NO_CLEAR_UA 0x0002 333 /* The drive does not support START STOP. */ 334 #define NO_START_STOP 0x0004 335 /* Don't ask for full inquiry data (255b). */ 336 #define FORCE_SHORT_INQUIRY 0x0008 337 /* Needs to be initialised the Shuttle way */ 338 #define SHUTTLE_INIT 0x0010 339 /* Drive needs to be switched to alternate iface 1 */ 340 #define ALT_IFACE_1 0x0020 341 /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */ 342 #define FLOPPY_SPEED 0x0040 343 /* The device can't count and gets the residue of transfers wrong */ 344 #define IGNORE_RESIDUE 0x0080 345 /* No GetMaxLun call */ 346 #define NO_GETMAXLUN 0x0100 347 /* The device uses a weird CSWSIGNATURE. */ 348 #define WRONG_CSWSIG 0x0200 349 /* Device cannot handle INQUIRY so fake a generic response */ 350 #define NO_INQUIRY 0x0400 351 /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */ 352 #define NO_INQUIRY_EVPD 0x0800 353 /* Pad all RBC requests to 12 bytes. */ 354 #define RBC_PAD_TO_12 0x1000 355 /* 356 * Device reports number of sectors from READ_CAPACITY, not max 357 * sector number. 358 */ 359 #define READ_CAPACITY_OFFBY1 0x2000 360 /* 361 * Device cannot handle a SCSI synchronize cache command. Normally 362 * this quirk would be handled in the cam layer, but for IDE bridges 363 * we need to associate the quirk with the bridge and not the 364 * underlying disk device. This is handled by faking a success 365 * result. 366 */ 367 #define NO_SYNCHRONIZE_CACHE 0x4000 368 /* Device does not support 'PREVENT/ALLOW MEDIUM REMOVAL'. */ 369 #define NO_PREVENT_ALLOW 0x8000 370 371 struct umass_softc { 372 373 struct scsi_sense cam_scsi_sense; 374 struct scsi_test_unit_ready cam_scsi_test_unit_ready; 375 struct mtx sc_mtx; 376 struct { 377 uint8_t *data_ptr; 378 union ccb *ccb; 379 umass_callback_t *callback; 380 381 uint32_t data_len; /* bytes */ 382 uint32_t data_rem; /* bytes */ 383 uint32_t data_timeout; /* ms */ 384 uint32_t actlen; /* bytes */ 385 386 uint8_t cmd_data[UMASS_MAX_CMDLEN]; 387 uint8_t cmd_len; /* bytes */ 388 uint8_t dir; 389 uint8_t lun; 390 } sc_transfer; 391 392 /* Bulk specific variables for transfers in progress */ 393 umass_bbb_cbw_t cbw; /* command block wrapper */ 394 umass_bbb_csw_t csw; /* command status wrapper */ 395 396 /* CBI specific variables for transfers in progress */ 397 umass_cbi_sbl_t sbl; /* status block */ 398 399 device_t sc_dev; 400 struct usb_device *sc_udev; 401 struct cam_sim *sc_sim; /* SCSI Interface Module */ 402 struct usb_xfer *sc_xfer[UMASS_T_MAX]; 403 404 /* 405 * The command transform function is used to convert the SCSI 406 * commands into their derivatives, like UFI, ATAPI, and friends. 407 */ 408 umass_transform_t *sc_transform; 409 410 uint32_t sc_unit; 411 uint32_t sc_quirks; /* they got it almost right */ 412 uint32_t sc_proto; /* wire and cmd protocol */ 413 414 uint8_t sc_name[16]; 415 uint8_t sc_iface_no; /* interface number */ 416 uint8_t sc_maxlun; /* maximum LUN number, inclusive */ 417 uint8_t sc_last_xfer_index; 418 uint8_t sc_status_try; 419 }; 420 421 struct umass_probe_proto { 422 uint32_t quirks; 423 uint32_t proto; 424 425 int error; 426 }; 427 428 /* prototypes */ 429 430 static device_probe_t umass_probe; 431 static device_attach_t umass_attach; 432 static device_detach_t umass_detach; 433 434 static usb_callback_t umass_tr_error; 435 static usb_callback_t umass_t_bbb_reset1_callback; 436 static usb_callback_t umass_t_bbb_reset2_callback; 437 static usb_callback_t umass_t_bbb_reset3_callback; 438 static usb_callback_t umass_t_bbb_command_callback; 439 static usb_callback_t umass_t_bbb_data_read_callback; 440 static usb_callback_t umass_t_bbb_data_rd_cs_callback; 441 static usb_callback_t umass_t_bbb_data_write_callback; 442 static usb_callback_t umass_t_bbb_data_wr_cs_callback; 443 static usb_callback_t umass_t_bbb_status_callback; 444 static usb_callback_t umass_t_cbi_reset1_callback; 445 static usb_callback_t umass_t_cbi_reset2_callback; 446 static usb_callback_t umass_t_cbi_reset3_callback; 447 static usb_callback_t umass_t_cbi_reset4_callback; 448 static usb_callback_t umass_t_cbi_command_callback; 449 static usb_callback_t umass_t_cbi_data_read_callback; 450 static usb_callback_t umass_t_cbi_data_rd_cs_callback; 451 static usb_callback_t umass_t_cbi_data_write_callback; 452 static usb_callback_t umass_t_cbi_data_wr_cs_callback; 453 static usb_callback_t umass_t_cbi_status_callback; 454 455 static void umass_cancel_ccb(struct umass_softc *); 456 static void umass_init_shuttle(struct umass_softc *); 457 static void umass_reset(struct umass_softc *); 458 static void umass_t_bbb_data_clear_stall_callback(struct usb_xfer *, 459 uint8_t, uint8_t, usb_error_t); 460 static void umass_command_start(struct umass_softc *, uint8_t, void *, 461 uint32_t, uint32_t, umass_callback_t *, union ccb *); 462 static uint8_t umass_bbb_get_max_lun(struct umass_softc *); 463 static void umass_cbi_start_status(struct umass_softc *); 464 static void umass_t_cbi_data_clear_stall_callback(struct usb_xfer *, 465 uint8_t, uint8_t, usb_error_t); 466 static int umass_cam_attach_sim(struct umass_softc *); 467 static void umass_cam_attach(struct umass_softc *); 468 static void umass_cam_detach_sim(struct umass_softc *); 469 static void umass_cam_action(struct cam_sim *, union ccb *); 470 static void umass_cam_poll(struct cam_sim *); 471 static void umass_cam_cb(struct umass_softc *, union ccb *, uint32_t, 472 uint8_t); 473 static void umass_cam_sense_cb(struct umass_softc *, union ccb *, uint32_t, 474 uint8_t); 475 static void umass_cam_quirk_cb(struct umass_softc *, union ccb *, uint32_t, 476 uint8_t); 477 static uint8_t umass_scsi_transform(struct umass_softc *, uint8_t *, uint8_t); 478 static uint8_t umass_rbc_transform(struct umass_softc *, uint8_t *, uint8_t); 479 static uint8_t umass_ufi_transform(struct umass_softc *, uint8_t *, uint8_t); 480 static uint8_t umass_atapi_transform(struct umass_softc *, uint8_t *, 481 uint8_t); 482 static uint8_t umass_no_transform(struct umass_softc *, uint8_t *, uint8_t); 483 static uint8_t umass_std_transform(struct umass_softc *, union ccb *, uint8_t 484 *, uint8_t); 485 486 #ifdef USB_DEBUG 487 static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 488 static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 489 static void umass_cbi_dump_cmd(struct umass_softc *, void *, uint8_t); 490 static void umass_dump_buffer(struct umass_softc *, uint8_t *, uint32_t, 491 uint32_t); 492 #endif 493 494 static struct usb_config umass_bbb_config[UMASS_T_BBB_MAX] = { 495 496 [UMASS_T_BBB_RESET1] = { 497 .type = UE_CONTROL, 498 .endpoint = 0x00, /* Control pipe */ 499 .direction = UE_DIR_ANY, 500 .bufsize = sizeof(struct usb_device_request), 501 .callback = &umass_t_bbb_reset1_callback, 502 .timeout = 5000, /* 5 seconds */ 503 .interval = 500, /* 500 milliseconds */ 504 }, 505 506 [UMASS_T_BBB_RESET2] = { 507 .type = UE_CONTROL, 508 .endpoint = 0x00, /* Control pipe */ 509 .direction = UE_DIR_ANY, 510 .bufsize = sizeof(struct usb_device_request), 511 .callback = &umass_t_bbb_reset2_callback, 512 .timeout = 5000, /* 5 seconds */ 513 .interval = 50, /* 50 milliseconds */ 514 }, 515 516 [UMASS_T_BBB_RESET3] = { 517 .type = UE_CONTROL, 518 .endpoint = 0x00, /* Control pipe */ 519 .direction = UE_DIR_ANY, 520 .bufsize = sizeof(struct usb_device_request), 521 .callback = &umass_t_bbb_reset3_callback, 522 .timeout = 5000, /* 5 seconds */ 523 .interval = 50, /* 50 milliseconds */ 524 }, 525 526 [UMASS_T_BBB_COMMAND] = { 527 .type = UE_BULK, 528 .endpoint = UE_ADDR_ANY, 529 .direction = UE_DIR_OUT, 530 .bufsize = sizeof(umass_bbb_cbw_t), 531 .callback = &umass_t_bbb_command_callback, 532 .timeout = 5000, /* 5 seconds */ 533 }, 534 535 [UMASS_T_BBB_DATA_READ] = { 536 .type = UE_BULK, 537 .endpoint = UE_ADDR_ANY, 538 .direction = UE_DIR_IN, 539 .bufsize = UMASS_BULK_SIZE, 540 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 541 .callback = &umass_t_bbb_data_read_callback, 542 .timeout = 0, /* overwritten later */ 543 }, 544 545 [UMASS_T_BBB_DATA_RD_CS] = { 546 .type = UE_CONTROL, 547 .endpoint = 0x00, /* Control pipe */ 548 .direction = UE_DIR_ANY, 549 .bufsize = sizeof(struct usb_device_request), 550 .callback = &umass_t_bbb_data_rd_cs_callback, 551 .timeout = 5000, /* 5 seconds */ 552 }, 553 554 [UMASS_T_BBB_DATA_WRITE] = { 555 .type = UE_BULK, 556 .endpoint = UE_ADDR_ANY, 557 .direction = UE_DIR_OUT, 558 .bufsize = UMASS_BULK_SIZE, 559 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 560 .callback = &umass_t_bbb_data_write_callback, 561 .timeout = 0, /* overwritten later */ 562 }, 563 564 [UMASS_T_BBB_DATA_WR_CS] = { 565 .type = UE_CONTROL, 566 .endpoint = 0x00, /* Control pipe */ 567 .direction = UE_DIR_ANY, 568 .bufsize = sizeof(struct usb_device_request), 569 .callback = &umass_t_bbb_data_wr_cs_callback, 570 .timeout = 5000, /* 5 seconds */ 571 }, 572 573 [UMASS_T_BBB_STATUS] = { 574 .type = UE_BULK, 575 .endpoint = UE_ADDR_ANY, 576 .direction = UE_DIR_IN, 577 .bufsize = sizeof(umass_bbb_csw_t), 578 .flags = {.short_xfer_ok = 1,}, 579 .callback = &umass_t_bbb_status_callback, 580 .timeout = 5000, /* ms */ 581 }, 582 }; 583 584 static struct usb_config umass_cbi_config[UMASS_T_CBI_MAX] = { 585 586 [UMASS_T_CBI_RESET1] = { 587 .type = UE_CONTROL, 588 .endpoint = 0x00, /* Control pipe */ 589 .direction = UE_DIR_ANY, 590 .bufsize = (sizeof(struct usb_device_request) + 591 UMASS_CBI_DIAGNOSTIC_CMDLEN), 592 .callback = &umass_t_cbi_reset1_callback, 593 .timeout = 5000, /* 5 seconds */ 594 .interval = 500, /* 500 milliseconds */ 595 }, 596 597 [UMASS_T_CBI_RESET2] = { 598 .type = UE_CONTROL, 599 .endpoint = 0x00, /* Control pipe */ 600 .direction = UE_DIR_ANY, 601 .bufsize = sizeof(struct usb_device_request), 602 .callback = &umass_t_cbi_reset2_callback, 603 .timeout = 5000, /* 5 seconds */ 604 .interval = 50, /* 50 milliseconds */ 605 }, 606 607 [UMASS_T_CBI_RESET3] = { 608 .type = UE_CONTROL, 609 .endpoint = 0x00, /* Control pipe */ 610 .direction = UE_DIR_ANY, 611 .bufsize = sizeof(struct usb_device_request), 612 .callback = &umass_t_cbi_reset3_callback, 613 .timeout = 5000, /* 5 seconds */ 614 .interval = 50, /* 50 milliseconds */ 615 }, 616 617 [UMASS_T_CBI_COMMAND] = { 618 .type = UE_CONTROL, 619 .endpoint = 0x00, /* Control pipe */ 620 .direction = UE_DIR_ANY, 621 .bufsize = (sizeof(struct usb_device_request) + 622 UMASS_MAX_CMDLEN), 623 .callback = &umass_t_cbi_command_callback, 624 .timeout = 5000, /* 5 seconds */ 625 }, 626 627 [UMASS_T_CBI_DATA_READ] = { 628 .type = UE_BULK, 629 .endpoint = UE_ADDR_ANY, 630 .direction = UE_DIR_IN, 631 .bufsize = UMASS_BULK_SIZE, 632 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 633 .callback = &umass_t_cbi_data_read_callback, 634 .timeout = 0, /* overwritten later */ 635 }, 636 637 [UMASS_T_CBI_DATA_RD_CS] = { 638 .type = UE_CONTROL, 639 .endpoint = 0x00, /* Control pipe */ 640 .direction = UE_DIR_ANY, 641 .bufsize = sizeof(struct usb_device_request), 642 .callback = &umass_t_cbi_data_rd_cs_callback, 643 .timeout = 5000, /* 5 seconds */ 644 }, 645 646 [UMASS_T_CBI_DATA_WRITE] = { 647 .type = UE_BULK, 648 .endpoint = UE_ADDR_ANY, 649 .direction = UE_DIR_OUT, 650 .bufsize = UMASS_BULK_SIZE, 651 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 652 .callback = &umass_t_cbi_data_write_callback, 653 .timeout = 0, /* overwritten later */ 654 }, 655 656 [UMASS_T_CBI_DATA_WR_CS] = { 657 .type = UE_CONTROL, 658 .endpoint = 0x00, /* Control pipe */ 659 .direction = UE_DIR_ANY, 660 .bufsize = sizeof(struct usb_device_request), 661 .callback = &umass_t_cbi_data_wr_cs_callback, 662 .timeout = 5000, /* 5 seconds */ 663 }, 664 665 [UMASS_T_CBI_STATUS] = { 666 .type = UE_INTERRUPT, 667 .endpoint = UE_ADDR_ANY, 668 .direction = UE_DIR_IN, 669 .flags = {.short_xfer_ok = 1,.no_pipe_ok = 1,}, 670 .bufsize = sizeof(umass_cbi_sbl_t), 671 .callback = &umass_t_cbi_status_callback, 672 .timeout = 5000, /* ms */ 673 }, 674 675 [UMASS_T_CBI_RESET4] = { 676 .type = UE_CONTROL, 677 .endpoint = 0x00, /* Control pipe */ 678 .direction = UE_DIR_ANY, 679 .bufsize = sizeof(struct usb_device_request), 680 .callback = &umass_t_cbi_reset4_callback, 681 .timeout = 5000, /* ms */ 682 }, 683 }; 684 685 /* If device cannot return valid inquiry data, fake it */ 686 static const uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = { 687 0, /* removable */ 0x80, SCSI_REV_2, SCSI_REV_2, 688 /* additional_length */ 31, 0, 0, 0 689 }; 690 691 #define UFI_COMMAND_LENGTH 12 /* UFI commands are always 12 bytes */ 692 #define ATAPI_COMMAND_LENGTH 12 /* ATAPI commands are always 12 bytes */ 693 694 static devclass_t umass_devclass; 695 696 static device_method_t umass_methods[] = { 697 /* Device interface */ 698 DEVMETHOD(device_probe, umass_probe), 699 DEVMETHOD(device_attach, umass_attach), 700 DEVMETHOD(device_detach, umass_detach), 701 702 DEVMETHOD_END 703 }; 704 705 static driver_t umass_driver = { 706 .name = "umass", 707 .methods = umass_methods, 708 .size = sizeof(struct umass_softc), 709 }; 710 711 static const STRUCT_USB_HOST_ID __used umass_devs[] = { 712 /* generic mass storage class */ 713 {USB_IFACE_CLASS(UICLASS_MASS),}, 714 }; 715 716 DRIVER_MODULE(umass, uhub, umass_driver, umass_devclass, NULL, 0); 717 MODULE_DEPEND(umass, usb, 1, 1, 1); 718 MODULE_DEPEND(umass, cam, 1, 1, 1); 719 MODULE_VERSION(umass, 1); 720 USB_PNP_HOST_INFO(umass_devs); 721 722 /* 723 * USB device probe/attach/detach 724 */ 725 726 static uint16_t 727 umass_get_proto(struct usb_interface *iface) 728 { 729 struct usb_interface_descriptor *id; 730 uint16_t retval; 731 732 retval = 0; 733 734 /* Check for a standards compliant device */ 735 id = usbd_get_interface_descriptor(iface); 736 if ((id == NULL) || 737 (id->bInterfaceClass != UICLASS_MASS)) { 738 goto done; 739 } 740 switch (id->bInterfaceSubClass) { 741 case UISUBCLASS_SCSI: 742 retval |= UMASS_PROTO_SCSI; 743 break; 744 case UISUBCLASS_UFI: 745 retval |= UMASS_PROTO_UFI; 746 break; 747 case UISUBCLASS_RBC: 748 retval |= UMASS_PROTO_RBC; 749 break; 750 case UISUBCLASS_SFF8020I: 751 case UISUBCLASS_SFF8070I: 752 retval |= UMASS_PROTO_ATAPI; 753 break; 754 default: 755 goto done; 756 } 757 758 switch (id->bInterfaceProtocol) { 759 case UIPROTO_MASS_CBI: 760 retval |= UMASS_PROTO_CBI; 761 break; 762 case UIPROTO_MASS_CBI_I: 763 retval |= UMASS_PROTO_CBI_I; 764 break; 765 case UIPROTO_MASS_BBB_OLD: 766 case UIPROTO_MASS_BBB: 767 retval |= UMASS_PROTO_BBB; 768 break; 769 default: 770 goto done; 771 } 772 done: 773 return (retval); 774 } 775 776 /* 777 * Match the device we are seeing with the devices supported. 778 */ 779 static struct umass_probe_proto 780 umass_probe_proto(device_t dev, struct usb_attach_arg *uaa) 781 { 782 struct umass_probe_proto ret; 783 uint32_t quirks = NO_QUIRKS; 784 uint32_t proto = umass_get_proto(uaa->iface); 785 786 memset(&ret, 0, sizeof(ret)); 787 ret.error = BUS_PROBE_GENERIC; 788 789 /* Search for protocol enforcement */ 790 791 if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_BBB)) { 792 proto &= ~UMASS_PROTO_WIRE; 793 proto |= UMASS_PROTO_BBB; 794 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI)) { 795 proto &= ~UMASS_PROTO_WIRE; 796 proto |= UMASS_PROTO_CBI; 797 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI_I)) { 798 proto &= ~UMASS_PROTO_WIRE; 799 proto |= UMASS_PROTO_CBI_I; 800 } 801 802 if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_SCSI)) { 803 proto &= ~UMASS_PROTO_COMMAND; 804 proto |= UMASS_PROTO_SCSI; 805 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_ATAPI)) { 806 proto &= ~UMASS_PROTO_COMMAND; 807 proto |= UMASS_PROTO_ATAPI; 808 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_UFI)) { 809 proto &= ~UMASS_PROTO_COMMAND; 810 proto |= UMASS_PROTO_UFI; 811 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_RBC)) { 812 proto &= ~UMASS_PROTO_COMMAND; 813 proto |= UMASS_PROTO_RBC; 814 } 815 816 /* Check if the protocol is invalid */ 817 818 if ((proto & UMASS_PROTO_COMMAND) == 0) { 819 ret.error = ENXIO; 820 goto done; 821 } 822 823 if ((proto & UMASS_PROTO_WIRE) == 0) { 824 ret.error = ENXIO; 825 goto done; 826 } 827 828 /* Search for quirks */ 829 830 if (usb_test_quirk(uaa, UQ_MSC_NO_TEST_UNIT_READY)) 831 quirks |= NO_TEST_UNIT_READY; 832 if (usb_test_quirk(uaa, UQ_MSC_NO_RS_CLEAR_UA)) 833 quirks |= RS_NO_CLEAR_UA; 834 if (usb_test_quirk(uaa, UQ_MSC_NO_START_STOP)) 835 quirks |= NO_START_STOP; 836 if (usb_test_quirk(uaa, UQ_MSC_NO_GETMAXLUN)) 837 quirks |= NO_GETMAXLUN; 838 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY)) 839 quirks |= NO_INQUIRY; 840 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY_EVPD)) 841 quirks |= NO_INQUIRY_EVPD; 842 if (usb_test_quirk(uaa, UQ_MSC_NO_PREVENT_ALLOW)) 843 quirks |= NO_PREVENT_ALLOW; 844 if (usb_test_quirk(uaa, UQ_MSC_NO_SYNC_CACHE)) 845 quirks |= NO_SYNCHRONIZE_CACHE; 846 if (usb_test_quirk(uaa, UQ_MSC_SHUTTLE_INIT)) 847 quirks |= SHUTTLE_INIT; 848 if (usb_test_quirk(uaa, UQ_MSC_ALT_IFACE_1)) 849 quirks |= ALT_IFACE_1; 850 if (usb_test_quirk(uaa, UQ_MSC_FLOPPY_SPEED)) 851 quirks |= FLOPPY_SPEED; 852 if (usb_test_quirk(uaa, UQ_MSC_IGNORE_RESIDUE)) 853 quirks |= IGNORE_RESIDUE; 854 if (usb_test_quirk(uaa, UQ_MSC_WRONG_CSWSIG)) 855 quirks |= WRONG_CSWSIG; 856 if (usb_test_quirk(uaa, UQ_MSC_RBC_PAD_TO_12)) 857 quirks |= RBC_PAD_TO_12; 858 if (usb_test_quirk(uaa, UQ_MSC_READ_CAP_OFFBY1)) 859 quirks |= READ_CAPACITY_OFFBY1; 860 if (usb_test_quirk(uaa, UQ_MSC_FORCE_SHORT_INQ)) 861 quirks |= FORCE_SHORT_INQUIRY; 862 863 done: 864 ret.quirks = quirks; 865 ret.proto = proto; 866 return (ret); 867 } 868 869 static int 870 umass_probe(device_t dev) 871 { 872 struct usb_attach_arg *uaa = device_get_ivars(dev); 873 struct umass_probe_proto temp; 874 875 if (uaa->usb_mode != USB_MODE_HOST) { 876 return (ENXIO); 877 } 878 temp = umass_probe_proto(dev, uaa); 879 880 return (temp.error); 881 } 882 883 static int 884 umass_attach(device_t dev) 885 { 886 struct umass_softc *sc = device_get_softc(dev); 887 struct usb_attach_arg *uaa = device_get_ivars(dev); 888 struct umass_probe_proto temp = umass_probe_proto(dev, uaa); 889 struct usb_interface_descriptor *id; 890 int err; 891 892 /* 893 * NOTE: the softc struct is cleared in device_set_driver. 894 * We can safely call umass_detach without specifically 895 * initializing the struct. 896 */ 897 898 sc->sc_dev = dev; 899 sc->sc_udev = uaa->device; 900 sc->sc_proto = temp.proto; 901 sc->sc_quirks = temp.quirks; 902 sc->sc_unit = device_get_unit(dev); 903 904 snprintf(sc->sc_name, sizeof(sc->sc_name), 905 "%s", device_get_nameunit(dev)); 906 907 device_set_usb_desc(dev); 908 909 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), 910 NULL, MTX_DEF | MTX_RECURSE); 911 912 /* get interface index */ 913 914 id = usbd_get_interface_descriptor(uaa->iface); 915 if (id == NULL) { 916 device_printf(dev, "failed to get " 917 "interface number\n"); 918 goto detach; 919 } 920 sc->sc_iface_no = id->bInterfaceNumber; 921 922 #ifdef USB_DEBUG 923 device_printf(dev, " "); 924 925 switch (sc->sc_proto & UMASS_PROTO_COMMAND) { 926 case UMASS_PROTO_SCSI: 927 printf("SCSI"); 928 break; 929 case UMASS_PROTO_ATAPI: 930 printf("8070i (ATAPI)"); 931 break; 932 case UMASS_PROTO_UFI: 933 printf("UFI"); 934 break; 935 case UMASS_PROTO_RBC: 936 printf("RBC"); 937 break; 938 default: 939 printf("(unknown 0x%02x)", 940 sc->sc_proto & UMASS_PROTO_COMMAND); 941 break; 942 } 943 944 printf(" over "); 945 946 switch (sc->sc_proto & UMASS_PROTO_WIRE) { 947 case UMASS_PROTO_BBB: 948 printf("Bulk-Only"); 949 break; 950 case UMASS_PROTO_CBI: /* uses Comand/Bulk pipes */ 951 printf("CBI"); 952 break; 953 case UMASS_PROTO_CBI_I: /* uses Comand/Bulk/Interrupt pipes */ 954 printf("CBI with CCI"); 955 break; 956 default: 957 printf("(unknown 0x%02x)", 958 sc->sc_proto & UMASS_PROTO_WIRE); 959 } 960 961 printf("; quirks = 0x%04x\n", sc->sc_quirks); 962 #endif 963 964 if (sc->sc_quirks & ALT_IFACE_1) { 965 err = usbd_set_alt_interface_index 966 (uaa->device, uaa->info.bIfaceIndex, 1); 967 968 if (err) { 969 DPRINTF(sc, UDMASS_USB, "could not switch to " 970 "Alt Interface 1\n"); 971 goto detach; 972 } 973 } 974 /* allocate all required USB transfers */ 975 976 if (sc->sc_proto & UMASS_PROTO_BBB) { 977 978 err = usbd_transfer_setup(uaa->device, 979 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_bbb_config, 980 UMASS_T_BBB_MAX, sc, &sc->sc_mtx); 981 982 /* skip reset first time */ 983 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 984 985 } else if (sc->sc_proto & (UMASS_PROTO_CBI | UMASS_PROTO_CBI_I)) { 986 987 err = usbd_transfer_setup(uaa->device, 988 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_cbi_config, 989 UMASS_T_CBI_MAX, sc, &sc->sc_mtx); 990 991 /* skip reset first time */ 992 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 993 994 } else { 995 err = USB_ERR_INVAL; 996 } 997 998 if (err) { 999 device_printf(dev, "could not setup required " 1000 "transfers, %s\n", usbd_errstr(err)); 1001 goto detach; 1002 } 1003 #ifdef USB_DEBUG 1004 if (umass_throttle > 0) { 1005 uint8_t x; 1006 int iv; 1007 1008 iv = umass_throttle; 1009 1010 if (iv < 1) 1011 iv = 1; 1012 else if (iv > 8000) 1013 iv = 8000; 1014 1015 for (x = 0; x != UMASS_T_MAX; x++) { 1016 if (sc->sc_xfer[x] != NULL) 1017 usbd_xfer_set_interval(sc->sc_xfer[x], iv); 1018 } 1019 } 1020 #endif 1021 sc->sc_transform = 1022 (sc->sc_proto & UMASS_PROTO_SCSI) ? &umass_scsi_transform : 1023 (sc->sc_proto & UMASS_PROTO_UFI) ? &umass_ufi_transform : 1024 (sc->sc_proto & UMASS_PROTO_ATAPI) ? &umass_atapi_transform : 1025 (sc->sc_proto & UMASS_PROTO_RBC) ? &umass_rbc_transform : 1026 &umass_no_transform; 1027 1028 /* from here onwards the device can be used. */ 1029 1030 if (sc->sc_quirks & SHUTTLE_INIT) { 1031 umass_init_shuttle(sc); 1032 } 1033 /* get the maximum LUN supported by the device */ 1034 1035 if (((sc->sc_proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB) && 1036 !(sc->sc_quirks & NO_GETMAXLUN)) 1037 sc->sc_maxlun = umass_bbb_get_max_lun(sc); 1038 else 1039 sc->sc_maxlun = 0; 1040 1041 /* Prepare the SCSI command block */ 1042 sc->cam_scsi_sense.opcode = REQUEST_SENSE; 1043 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY; 1044 1045 /* register the SIM */ 1046 err = umass_cam_attach_sim(sc); 1047 if (err) { 1048 goto detach; 1049 } 1050 /* scan the SIM */ 1051 umass_cam_attach(sc); 1052 1053 DPRINTF(sc, UDMASS_GEN, "Attach finished\n"); 1054 1055 return (0); /* success */ 1056 1057 detach: 1058 umass_detach(dev); 1059 return (ENXIO); /* failure */ 1060 } 1061 1062 static int 1063 umass_detach(device_t dev) 1064 { 1065 struct umass_softc *sc = device_get_softc(dev); 1066 1067 DPRINTF(sc, UDMASS_USB, "\n"); 1068 1069 /* teardown our statemachine */ 1070 1071 usbd_transfer_unsetup(sc->sc_xfer, UMASS_T_MAX); 1072 1073 mtx_lock(&sc->sc_mtx); 1074 1075 /* cancel any leftover CCB's */ 1076 1077 umass_cancel_ccb(sc); 1078 1079 umass_cam_detach_sim(sc); 1080 1081 mtx_unlock(&sc->sc_mtx); 1082 1083 mtx_destroy(&sc->sc_mtx); 1084 1085 return (0); /* success */ 1086 } 1087 1088 static void 1089 umass_init_shuttle(struct umass_softc *sc) 1090 { 1091 struct usb_device_request req; 1092 usb_error_t err; 1093 uint8_t status[2] = {0, 0}; 1094 1095 /* 1096 * The Linux driver does this, but no one can tell us what the 1097 * command does. 1098 */ 1099 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1100 req.bRequest = 1; /* XXX unknown command */ 1101 USETW(req.wValue, 0); 1102 req.wIndex[0] = sc->sc_iface_no; 1103 req.wIndex[1] = 0; 1104 USETW(req.wLength, sizeof(status)); 1105 err = usbd_do_request(sc->sc_udev, NULL, &req, &status); 1106 1107 DPRINTF(sc, UDMASS_GEN, "Shuttle init returned 0x%02x%02x\n", 1108 status[0], status[1]); 1109 } 1110 1111 /* 1112 * Generic functions to handle transfers 1113 */ 1114 1115 static void 1116 umass_transfer_start(struct umass_softc *sc, uint8_t xfer_index) 1117 { 1118 DPRINTF(sc, UDMASS_GEN, "transfer index = " 1119 "%d\n", xfer_index); 1120 1121 if (sc->sc_xfer[xfer_index]) { 1122 sc->sc_last_xfer_index = xfer_index; 1123 usbd_transfer_start(sc->sc_xfer[xfer_index]); 1124 } else { 1125 umass_cancel_ccb(sc); 1126 } 1127 } 1128 1129 static void 1130 umass_reset(struct umass_softc *sc) 1131 { 1132 DPRINTF(sc, UDMASS_GEN, "resetting device\n"); 1133 1134 /* 1135 * stop the last transfer, if not already stopped: 1136 */ 1137 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 1138 umass_transfer_start(sc, 0); 1139 } 1140 1141 static void 1142 umass_cancel_ccb(struct umass_softc *sc) 1143 { 1144 union ccb *ccb; 1145 1146 USB_MTX_ASSERT(&sc->sc_mtx, MA_OWNED); 1147 1148 ccb = sc->sc_transfer.ccb; 1149 sc->sc_transfer.ccb = NULL; 1150 sc->sc_last_xfer_index = 0; 1151 1152 if (ccb) { 1153 (sc->sc_transfer.callback) 1154 (sc, ccb, (sc->sc_transfer.data_len - 1155 sc->sc_transfer.actlen), STATUS_WIRE_FAILED); 1156 } 1157 } 1158 1159 static void 1160 umass_tr_error(struct usb_xfer *xfer, usb_error_t error) 1161 { 1162 struct umass_softc *sc = usbd_xfer_softc(xfer); 1163 1164 if (error != USB_ERR_CANCELLED) { 1165 1166 DPRINTF(sc, UDMASS_GEN, "transfer error, %s -> " 1167 "reset\n", usbd_errstr(error)); 1168 } 1169 umass_cancel_ccb(sc); 1170 } 1171 1172 /* 1173 * BBB protocol specific functions 1174 */ 1175 1176 static void 1177 umass_t_bbb_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1178 { 1179 struct umass_softc *sc = usbd_xfer_softc(xfer); 1180 struct usb_device_request req; 1181 struct usb_page_cache *pc; 1182 1183 switch (USB_GET_STATE(xfer)) { 1184 case USB_ST_TRANSFERRED: 1185 umass_transfer_start(sc, UMASS_T_BBB_RESET2); 1186 return; 1187 1188 case USB_ST_SETUP: 1189 /* 1190 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1191 * 1192 * For Reset Recovery the host shall issue in the following order: 1193 * a) a Bulk-Only Mass Storage Reset 1194 * b) a Clear Feature HALT to the Bulk-In endpoint 1195 * c) a Clear Feature HALT to the Bulk-Out endpoint 1196 * 1197 * This is done in 3 steps, using 3 transfers: 1198 * UMASS_T_BBB_RESET1 1199 * UMASS_T_BBB_RESET2 1200 * UMASS_T_BBB_RESET3 1201 */ 1202 1203 DPRINTF(sc, UDMASS_BBB, "BBB reset!\n"); 1204 1205 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1206 req.bRequest = UR_BBB_RESET; /* bulk only reset */ 1207 USETW(req.wValue, 0); 1208 req.wIndex[0] = sc->sc_iface_no; 1209 req.wIndex[1] = 0; 1210 USETW(req.wLength, 0); 1211 1212 pc = usbd_xfer_get_frame(xfer, 0); 1213 usbd_copy_in(pc, 0, &req, sizeof(req)); 1214 1215 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1216 usbd_xfer_set_frames(xfer, 1); 1217 usbd_transfer_submit(xfer); 1218 return; 1219 1220 default: /* Error */ 1221 umass_tr_error(xfer, error); 1222 return; 1223 } 1224 } 1225 1226 static void 1227 umass_t_bbb_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1228 { 1229 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_RESET3, 1230 UMASS_T_BBB_DATA_READ, error); 1231 } 1232 1233 static void 1234 umass_t_bbb_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1235 { 1236 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_COMMAND, 1237 UMASS_T_BBB_DATA_WRITE, error); 1238 } 1239 1240 static void 1241 umass_t_bbb_data_clear_stall_callback(struct usb_xfer *xfer, 1242 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1243 { 1244 struct umass_softc *sc = usbd_xfer_softc(xfer); 1245 1246 switch (USB_GET_STATE(xfer)) { 1247 case USB_ST_TRANSFERRED: 1248 tr_transferred: 1249 umass_transfer_start(sc, next_xfer); 1250 return; 1251 1252 case USB_ST_SETUP: 1253 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1254 goto tr_transferred; 1255 } 1256 return; 1257 1258 default: /* Error */ 1259 umass_tr_error(xfer, error); 1260 return; 1261 } 1262 } 1263 1264 static void 1265 umass_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 1266 { 1267 struct umass_softc *sc = usbd_xfer_softc(xfer); 1268 union ccb *ccb = sc->sc_transfer.ccb; 1269 struct usb_page_cache *pc; 1270 uint32_t tag; 1271 1272 switch (USB_GET_STATE(xfer)) { 1273 case USB_ST_TRANSFERRED: 1274 umass_transfer_start 1275 (sc, ((sc->sc_transfer.dir == DIR_IN) ? UMASS_T_BBB_DATA_READ : 1276 (sc->sc_transfer.dir == DIR_OUT) ? UMASS_T_BBB_DATA_WRITE : 1277 UMASS_T_BBB_STATUS)); 1278 return; 1279 1280 case USB_ST_SETUP: 1281 1282 sc->sc_status_try = 0; 1283 1284 if (ccb) { 1285 1286 /* 1287 * the initial value is not important, 1288 * as long as the values are unique: 1289 */ 1290 tag = UGETDW(sc->cbw.dCBWTag) + 1; 1291 1292 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1293 USETDW(sc->cbw.dCBWTag, tag); 1294 1295 /* 1296 * dCBWDataTransferLength: 1297 * This field indicates the number of bytes of data that the host 1298 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1299 * the Direction bit) during the execution of this command. If this 1300 * field is set to 0, the device will expect that no data will be 1301 * transferred IN or OUT during this command, regardless of the value 1302 * of the Direction bit defined in dCBWFlags. 1303 */ 1304 USETDW(sc->cbw.dCBWDataTransferLength, sc->sc_transfer.data_len); 1305 1306 /* 1307 * dCBWFlags: 1308 * The bits of the Flags field are defined as follows: 1309 * Bits 0-6 reserved 1310 * Bit 7 Direction - this bit shall be ignored if the 1311 * dCBWDataTransferLength field is zero. 1312 * 0 = data Out from host to device 1313 * 1 = data In from device to host 1314 */ 1315 sc->cbw.bCBWFlags = ((sc->sc_transfer.dir == DIR_IN) ? 1316 CBWFLAGS_IN : CBWFLAGS_OUT); 1317 sc->cbw.bCBWLUN = sc->sc_transfer.lun; 1318 1319 if (sc->sc_transfer.cmd_len > sizeof(sc->cbw.CBWCDB)) { 1320 sc->sc_transfer.cmd_len = sizeof(sc->cbw.CBWCDB); 1321 DPRINTF(sc, UDMASS_BBB, "Truncating long command!\n"); 1322 } 1323 sc->cbw.bCDBLength = sc->sc_transfer.cmd_len; 1324 1325 /* copy SCSI command data */ 1326 memcpy(sc->cbw.CBWCDB, sc->sc_transfer.cmd_data, 1327 sc->sc_transfer.cmd_len); 1328 1329 /* clear remaining command area */ 1330 memset(sc->cbw.CBWCDB + 1331 sc->sc_transfer.cmd_len, 0, 1332 sizeof(sc->cbw.CBWCDB) - 1333 sc->sc_transfer.cmd_len); 1334 1335 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1336 1337 pc = usbd_xfer_get_frame(xfer, 0); 1338 usbd_copy_in(pc, 0, &sc->cbw, sizeof(sc->cbw)); 1339 usbd_xfer_set_frame_len(xfer, 0, sizeof(sc->cbw)); 1340 1341 usbd_transfer_submit(xfer); 1342 } 1343 return; 1344 1345 default: /* Error */ 1346 umass_tr_error(xfer, error); 1347 return; 1348 } 1349 } 1350 1351 static void 1352 umass_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1353 { 1354 struct umass_softc *sc = usbd_xfer_softc(xfer); 1355 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1356 int actlen, sumlen; 1357 1358 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1359 1360 switch (USB_GET_STATE(xfer)) { 1361 case USB_ST_TRANSFERRED: 1362 sc->sc_transfer.data_rem -= actlen; 1363 sc->sc_transfer.data_ptr += actlen; 1364 sc->sc_transfer.actlen += actlen; 1365 1366 if (actlen < sumlen) { 1367 /* short transfer */ 1368 sc->sc_transfer.data_rem = 0; 1369 } 1370 case USB_ST_SETUP: 1371 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1372 max_bulk, sc->sc_transfer.data_rem); 1373 1374 if (sc->sc_transfer.data_rem == 0) { 1375 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1376 return; 1377 } 1378 if (max_bulk > sc->sc_transfer.data_rem) { 1379 max_bulk = sc->sc_transfer.data_rem; 1380 } 1381 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1382 1383 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1384 max_bulk); 1385 1386 usbd_transfer_submit(xfer); 1387 return; 1388 1389 default: /* Error */ 1390 if (error == USB_ERR_CANCELLED) { 1391 umass_tr_error(xfer, error); 1392 } else { 1393 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1394 } 1395 return; 1396 } 1397 } 1398 1399 static void 1400 umass_t_bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1401 { 1402 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1403 UMASS_T_BBB_DATA_READ, error); 1404 } 1405 1406 static void 1407 umass_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1408 { 1409 struct umass_softc *sc = usbd_xfer_softc(xfer); 1410 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1411 int actlen, sumlen; 1412 1413 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1414 1415 switch (USB_GET_STATE(xfer)) { 1416 case USB_ST_TRANSFERRED: 1417 sc->sc_transfer.data_rem -= actlen; 1418 sc->sc_transfer.data_ptr += actlen; 1419 sc->sc_transfer.actlen += actlen; 1420 1421 if (actlen < sumlen) { 1422 /* short transfer */ 1423 sc->sc_transfer.data_rem = 0; 1424 } 1425 case USB_ST_SETUP: 1426 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1427 max_bulk, sc->sc_transfer.data_rem); 1428 1429 if (sc->sc_transfer.data_rem == 0) { 1430 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1431 return; 1432 } 1433 if (max_bulk > sc->sc_transfer.data_rem) { 1434 max_bulk = sc->sc_transfer.data_rem; 1435 } 1436 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1437 1438 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1439 max_bulk); 1440 1441 usbd_transfer_submit(xfer); 1442 return; 1443 1444 default: /* Error */ 1445 if (error == USB_ERR_CANCELLED) { 1446 umass_tr_error(xfer, error); 1447 } else { 1448 umass_transfer_start(sc, UMASS_T_BBB_DATA_WR_CS); 1449 } 1450 return; 1451 } 1452 } 1453 1454 static void 1455 umass_t_bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1456 { 1457 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1458 UMASS_T_BBB_DATA_WRITE, error); 1459 } 1460 1461 static void 1462 umass_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 1463 { 1464 struct umass_softc *sc = usbd_xfer_softc(xfer); 1465 union ccb *ccb = sc->sc_transfer.ccb; 1466 struct usb_page_cache *pc; 1467 uint32_t residue; 1468 int actlen; 1469 1470 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1471 1472 switch (USB_GET_STATE(xfer)) { 1473 case USB_ST_TRANSFERRED: 1474 1475 /* 1476 * Do a full reset if there is something wrong with the CSW: 1477 */ 1478 sc->sc_status_try = 1; 1479 1480 /* Zero missing parts of the CSW: */ 1481 1482 if (actlen < (int)sizeof(sc->csw)) 1483 memset(&sc->csw, 0, sizeof(sc->csw)); 1484 1485 pc = usbd_xfer_get_frame(xfer, 0); 1486 usbd_copy_out(pc, 0, &sc->csw, actlen); 1487 1488 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1489 1490 residue = UGETDW(sc->csw.dCSWDataResidue); 1491 1492 if ((!residue) || (sc->sc_quirks & IGNORE_RESIDUE)) { 1493 residue = (sc->sc_transfer.data_len - 1494 sc->sc_transfer.actlen); 1495 } 1496 if (residue > sc->sc_transfer.data_len) { 1497 DPRINTF(sc, UDMASS_BBB, "truncating residue from %d " 1498 "to %d bytes\n", residue, sc->sc_transfer.data_len); 1499 residue = sc->sc_transfer.data_len; 1500 } 1501 /* translate weird command-status signatures: */ 1502 if (sc->sc_quirks & WRONG_CSWSIG) { 1503 1504 uint32_t temp = UGETDW(sc->csw.dCSWSignature); 1505 1506 if ((temp == CSWSIGNATURE_OLYMPUS_C1) || 1507 (temp == CSWSIGNATURE_IMAGINATION_DBX1)) { 1508 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1509 } 1510 } 1511 /* check CSW and handle eventual error */ 1512 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1513 DPRINTF(sc, UDMASS_BBB, "bad CSW signature 0x%08x != 0x%08x\n", 1514 UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); 1515 /* 1516 * Invalid CSW: Wrong signature or wrong tag might 1517 * indicate that we lost synchronization. Reset the 1518 * device. 1519 */ 1520 goto tr_error; 1521 } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { 1522 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: tag 0x%08x should be " 1523 "0x%08x\n", UGETDW(sc->csw.dCSWTag), 1524 UGETDW(sc->cbw.dCBWTag)); 1525 goto tr_error; 1526 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1527 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: status %d > %d\n", 1528 sc->csw.bCSWStatus, CSWSTATUS_PHASE); 1529 goto tr_error; 1530 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1531 DPRINTF(sc, UDMASS_BBB, "Phase error, residue = " 1532 "%d\n", residue); 1533 goto tr_error; 1534 } else if (sc->sc_transfer.actlen > sc->sc_transfer.data_len) { 1535 DPRINTF(sc, UDMASS_BBB, "Buffer overrun %d > %d\n", 1536 sc->sc_transfer.actlen, sc->sc_transfer.data_len); 1537 goto tr_error; 1538 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1539 DPRINTF(sc, UDMASS_BBB, "Command failed, residue = " 1540 "%d\n", residue); 1541 1542 sc->sc_transfer.ccb = NULL; 1543 1544 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1545 1546 (sc->sc_transfer.callback) 1547 (sc, ccb, residue, STATUS_CMD_FAILED); 1548 } else { 1549 sc->sc_transfer.ccb = NULL; 1550 1551 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1552 1553 (sc->sc_transfer.callback) 1554 (sc, ccb, residue, STATUS_CMD_OK); 1555 } 1556 return; 1557 1558 case USB_ST_SETUP: 1559 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 1560 usbd_transfer_submit(xfer); 1561 return; 1562 1563 default: 1564 tr_error: 1565 DPRINTF(sc, UDMASS_BBB, "Failed to read CSW: %s, try %d\n", 1566 usbd_errstr(error), sc->sc_status_try); 1567 1568 if ((error == USB_ERR_CANCELLED) || 1569 (sc->sc_status_try)) { 1570 umass_tr_error(xfer, error); 1571 } else { 1572 sc->sc_status_try = 1; 1573 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1574 } 1575 return; 1576 } 1577 } 1578 1579 static void 1580 umass_command_start(struct umass_softc *sc, uint8_t dir, 1581 void *data_ptr, uint32_t data_len, 1582 uint32_t data_timeout, umass_callback_t *callback, 1583 union ccb *ccb) 1584 { 1585 sc->sc_transfer.lun = ccb->ccb_h.target_lun; 1586 1587 /* 1588 * NOTE: assumes that "sc->sc_transfer.cmd_data" and 1589 * "sc->sc_transfer.cmd_len" has been properly 1590 * initialized. 1591 */ 1592 1593 sc->sc_transfer.dir = data_len ? dir : DIR_NONE; 1594 sc->sc_transfer.data_ptr = data_ptr; 1595 sc->sc_transfer.data_len = data_len; 1596 sc->sc_transfer.data_rem = data_len; 1597 sc->sc_transfer.data_timeout = (data_timeout + UMASS_TIMEOUT); 1598 1599 sc->sc_transfer.actlen = 0; 1600 sc->sc_transfer.callback = callback; 1601 sc->sc_transfer.ccb = ccb; 1602 1603 if (sc->sc_xfer[sc->sc_last_xfer_index]) { 1604 usbd_transfer_start(sc->sc_xfer[sc->sc_last_xfer_index]); 1605 } else { 1606 umass_cancel_ccb(sc); 1607 } 1608 } 1609 1610 static uint8_t 1611 umass_bbb_get_max_lun(struct umass_softc *sc) 1612 { 1613 struct usb_device_request req; 1614 usb_error_t err; 1615 uint8_t buf = 0; 1616 1617 /* The Get Max Lun command is a class-specific request. */ 1618 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1619 req.bRequest = UR_BBB_GET_MAX_LUN; 1620 USETW(req.wValue, 0); 1621 req.wIndex[0] = sc->sc_iface_no; 1622 req.wIndex[1] = 0; 1623 USETW(req.wLength, 1); 1624 1625 err = usbd_do_request(sc->sc_udev, NULL, &req, &buf); 1626 if (err) { 1627 buf = 0; 1628 1629 /* Device doesn't support Get Max Lun request. */ 1630 printf("%s: Get Max Lun not supported (%s)\n", 1631 sc->sc_name, usbd_errstr(err)); 1632 } 1633 return (buf); 1634 } 1635 1636 /* 1637 * Command/Bulk/Interrupt (CBI) specific functions 1638 */ 1639 1640 static void 1641 umass_cbi_start_status(struct umass_softc *sc) 1642 { 1643 if (sc->sc_xfer[UMASS_T_CBI_STATUS]) { 1644 umass_transfer_start(sc, UMASS_T_CBI_STATUS); 1645 } else { 1646 union ccb *ccb = sc->sc_transfer.ccb; 1647 1648 sc->sc_transfer.ccb = NULL; 1649 1650 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1651 1652 (sc->sc_transfer.callback) 1653 (sc, ccb, (sc->sc_transfer.data_len - 1654 sc->sc_transfer.actlen), STATUS_CMD_UNKNOWN); 1655 } 1656 } 1657 1658 static void 1659 umass_t_cbi_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1660 { 1661 struct umass_softc *sc = usbd_xfer_softc(xfer); 1662 struct usb_device_request req; 1663 struct usb_page_cache *pc; 1664 uint8_t buf[UMASS_CBI_DIAGNOSTIC_CMDLEN]; 1665 1666 uint8_t i; 1667 1668 switch (USB_GET_STATE(xfer)) { 1669 case USB_ST_TRANSFERRED: 1670 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1671 break; 1672 1673 case USB_ST_SETUP: 1674 /* 1675 * Command Block Reset Protocol 1676 * 1677 * First send a reset request to the device. Then clear 1678 * any possibly stalled bulk endpoints. 1679 * 1680 * This is done in 3 steps, using 3 transfers: 1681 * UMASS_T_CBI_RESET1 1682 * UMASS_T_CBI_RESET2 1683 * UMASS_T_CBI_RESET3 1684 * UMASS_T_CBI_RESET4 (only if there is an interrupt endpoint) 1685 */ 1686 1687 DPRINTF(sc, UDMASS_CBI, "CBI reset!\n"); 1688 1689 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1690 req.bRequest = UR_CBI_ADSC; 1691 USETW(req.wValue, 0); 1692 req.wIndex[0] = sc->sc_iface_no; 1693 req.wIndex[1] = 0; 1694 USETW(req.wLength, UMASS_CBI_DIAGNOSTIC_CMDLEN); 1695 1696 /* 1697 * The 0x1d code is the SEND DIAGNOSTIC command. To 1698 * distinguish between the two, the last 10 bytes of the CBL 1699 * is filled with 0xff (section 2.2 of the CBI 1700 * specification) 1701 */ 1702 buf[0] = 0x1d; /* Command Block Reset */ 1703 buf[1] = 0x04; 1704 1705 for (i = 2; i < UMASS_CBI_DIAGNOSTIC_CMDLEN; i++) { 1706 buf[i] = 0xff; 1707 } 1708 1709 pc = usbd_xfer_get_frame(xfer, 0); 1710 usbd_copy_in(pc, 0, &req, sizeof(req)); 1711 pc = usbd_xfer_get_frame(xfer, 1); 1712 usbd_copy_in(pc, 0, buf, sizeof(buf)); 1713 1714 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1715 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); 1716 usbd_xfer_set_frames(xfer, 2); 1717 usbd_transfer_submit(xfer); 1718 break; 1719 1720 default: /* Error */ 1721 if (error == USB_ERR_CANCELLED) 1722 umass_tr_error(xfer, error); 1723 else 1724 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1725 break; 1726 } 1727 } 1728 1729 static void 1730 umass_t_cbi_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1731 { 1732 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_RESET3, 1733 UMASS_T_CBI_DATA_READ, error); 1734 } 1735 1736 static void 1737 umass_t_cbi_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1738 { 1739 struct umass_softc *sc = usbd_xfer_softc(xfer); 1740 1741 umass_t_cbi_data_clear_stall_callback 1742 (xfer, (sc->sc_xfer[UMASS_T_CBI_RESET4] && 1743 sc->sc_xfer[UMASS_T_CBI_STATUS]) ? 1744 UMASS_T_CBI_RESET4 : UMASS_T_CBI_COMMAND, 1745 UMASS_T_CBI_DATA_WRITE, error); 1746 } 1747 1748 static void 1749 umass_t_cbi_reset4_callback(struct usb_xfer *xfer, usb_error_t error) 1750 { 1751 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_COMMAND, 1752 UMASS_T_CBI_STATUS, error); 1753 } 1754 1755 static void 1756 umass_t_cbi_data_clear_stall_callback(struct usb_xfer *xfer, 1757 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1758 { 1759 struct umass_softc *sc = usbd_xfer_softc(xfer); 1760 1761 switch (USB_GET_STATE(xfer)) { 1762 case USB_ST_TRANSFERRED: 1763 tr_transferred: 1764 if (next_xfer == UMASS_T_CBI_STATUS) { 1765 umass_cbi_start_status(sc); 1766 } else { 1767 umass_transfer_start(sc, next_xfer); 1768 } 1769 break; 1770 1771 case USB_ST_SETUP: 1772 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1773 goto tr_transferred; /* should not happen */ 1774 } 1775 break; 1776 1777 default: /* Error */ 1778 umass_tr_error(xfer, error); 1779 break; 1780 } 1781 } 1782 1783 static void 1784 umass_t_cbi_command_callback(struct usb_xfer *xfer, usb_error_t error) 1785 { 1786 struct umass_softc *sc = usbd_xfer_softc(xfer); 1787 union ccb *ccb = sc->sc_transfer.ccb; 1788 struct usb_device_request req; 1789 struct usb_page_cache *pc; 1790 1791 switch (USB_GET_STATE(xfer)) { 1792 case USB_ST_TRANSFERRED: 1793 1794 if (sc->sc_transfer.dir == DIR_NONE) { 1795 umass_cbi_start_status(sc); 1796 } else { 1797 umass_transfer_start 1798 (sc, (sc->sc_transfer.dir == DIR_IN) ? 1799 UMASS_T_CBI_DATA_READ : UMASS_T_CBI_DATA_WRITE); 1800 } 1801 break; 1802 1803 case USB_ST_SETUP: 1804 1805 if (ccb) { 1806 1807 /* 1808 * do a CBI transfer with cmd_len bytes from 1809 * cmd_data, possibly a data phase of data_len 1810 * bytes from/to the device and finally a status 1811 * read phase. 1812 */ 1813 1814 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1815 req.bRequest = UR_CBI_ADSC; 1816 USETW(req.wValue, 0); 1817 req.wIndex[0] = sc->sc_iface_no; 1818 req.wIndex[1] = 0; 1819 req.wLength[0] = sc->sc_transfer.cmd_len; 1820 req.wLength[1] = 0; 1821 1822 pc = usbd_xfer_get_frame(xfer, 0); 1823 usbd_copy_in(pc, 0, &req, sizeof(req)); 1824 pc = usbd_xfer_get_frame(xfer, 1); 1825 usbd_copy_in(pc, 0, sc->sc_transfer.cmd_data, 1826 sc->sc_transfer.cmd_len); 1827 1828 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1829 usbd_xfer_set_frame_len(xfer, 1, sc->sc_transfer.cmd_len); 1830 usbd_xfer_set_frames(xfer, 1831 sc->sc_transfer.cmd_len ? 2 : 1); 1832 1833 DIF(UDMASS_CBI, 1834 umass_cbi_dump_cmd(sc, 1835 sc->sc_transfer.cmd_data, 1836 sc->sc_transfer.cmd_len)); 1837 1838 usbd_transfer_submit(xfer); 1839 } 1840 break; 1841 1842 default: /* Error */ 1843 /* 1844 * STALL on the control pipe can be result of the command error. 1845 * Attempt to clear this STALL same as for bulk pipe also 1846 * results in command completion interrupt, but ASC/ASCQ there 1847 * look like not always valid, so don't bother about it. 1848 */ 1849 if ((error == USB_ERR_STALLED) || 1850 (sc->sc_transfer.callback == &umass_cam_cb)) { 1851 sc->sc_transfer.ccb = NULL; 1852 (sc->sc_transfer.callback) 1853 (sc, ccb, sc->sc_transfer.data_len, 1854 STATUS_CMD_UNKNOWN); 1855 } else { 1856 umass_tr_error(xfer, error); 1857 /* skip reset */ 1858 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1859 } 1860 break; 1861 } 1862 } 1863 1864 static void 1865 umass_t_cbi_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1866 { 1867 struct umass_softc *sc = usbd_xfer_softc(xfer); 1868 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1869 int actlen, sumlen; 1870 1871 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1872 1873 switch (USB_GET_STATE(xfer)) { 1874 case USB_ST_TRANSFERRED: 1875 sc->sc_transfer.data_rem -= actlen; 1876 sc->sc_transfer.data_ptr += actlen; 1877 sc->sc_transfer.actlen += actlen; 1878 1879 if (actlen < sumlen) { 1880 /* short transfer */ 1881 sc->sc_transfer.data_rem = 0; 1882 } 1883 case USB_ST_SETUP: 1884 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1885 max_bulk, sc->sc_transfer.data_rem); 1886 1887 if (sc->sc_transfer.data_rem == 0) { 1888 umass_cbi_start_status(sc); 1889 break; 1890 } 1891 if (max_bulk > sc->sc_transfer.data_rem) { 1892 max_bulk = sc->sc_transfer.data_rem; 1893 } 1894 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1895 1896 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1897 max_bulk); 1898 1899 usbd_transfer_submit(xfer); 1900 break; 1901 1902 default: /* Error */ 1903 if ((error == USB_ERR_CANCELLED) || 1904 (sc->sc_transfer.callback != &umass_cam_cb)) { 1905 umass_tr_error(xfer, error); 1906 } else { 1907 umass_transfer_start(sc, UMASS_T_CBI_DATA_RD_CS); 1908 } 1909 break; 1910 } 1911 } 1912 1913 static void 1914 umass_t_cbi_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1915 { 1916 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1917 UMASS_T_CBI_DATA_READ, error); 1918 } 1919 1920 static void 1921 umass_t_cbi_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1922 { 1923 struct umass_softc *sc = usbd_xfer_softc(xfer); 1924 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1925 int actlen, sumlen; 1926 1927 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1928 1929 switch (USB_GET_STATE(xfer)) { 1930 case USB_ST_TRANSFERRED: 1931 sc->sc_transfer.data_rem -= actlen; 1932 sc->sc_transfer.data_ptr += actlen; 1933 sc->sc_transfer.actlen += actlen; 1934 1935 if (actlen < sumlen) { 1936 /* short transfer */ 1937 sc->sc_transfer.data_rem = 0; 1938 } 1939 case USB_ST_SETUP: 1940 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1941 max_bulk, sc->sc_transfer.data_rem); 1942 1943 if (sc->sc_transfer.data_rem == 0) { 1944 umass_cbi_start_status(sc); 1945 break; 1946 } 1947 if (max_bulk > sc->sc_transfer.data_rem) { 1948 max_bulk = sc->sc_transfer.data_rem; 1949 } 1950 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1951 1952 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1953 max_bulk); 1954 1955 usbd_transfer_submit(xfer); 1956 break; 1957 1958 default: /* Error */ 1959 if ((error == USB_ERR_CANCELLED) || 1960 (sc->sc_transfer.callback != &umass_cam_cb)) { 1961 umass_tr_error(xfer, error); 1962 } else { 1963 umass_transfer_start(sc, UMASS_T_CBI_DATA_WR_CS); 1964 } 1965 break; 1966 } 1967 } 1968 1969 static void 1970 umass_t_cbi_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1971 { 1972 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1973 UMASS_T_CBI_DATA_WRITE, error); 1974 } 1975 1976 static void 1977 umass_t_cbi_status_callback(struct usb_xfer *xfer, usb_error_t error) 1978 { 1979 struct umass_softc *sc = usbd_xfer_softc(xfer); 1980 union ccb *ccb = sc->sc_transfer.ccb; 1981 struct usb_page_cache *pc; 1982 uint32_t residue; 1983 uint8_t status; 1984 int actlen; 1985 1986 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1987 1988 switch (USB_GET_STATE(xfer)) { 1989 case USB_ST_TRANSFERRED: 1990 1991 if (actlen < (int)sizeof(sc->sbl)) { 1992 goto tr_setup; 1993 } 1994 pc = usbd_xfer_get_frame(xfer, 0); 1995 usbd_copy_out(pc, 0, &sc->sbl, sizeof(sc->sbl)); 1996 1997 residue = (sc->sc_transfer.data_len - 1998 sc->sc_transfer.actlen); 1999 2000 /* dissect the information in the buffer */ 2001 2002 if (sc->sc_proto & UMASS_PROTO_UFI) { 2003 2004 /* 2005 * Section 3.4.3.1.3 specifies that the UFI command 2006 * protocol returns an ASC and ASCQ in the interrupt 2007 * data block. 2008 */ 2009 2010 DPRINTF(sc, UDMASS_CBI, "UFI CCI, ASC = 0x%02x, " 2011 "ASCQ = 0x%02x\n", sc->sbl.ufi.asc, 2012 sc->sbl.ufi.ascq); 2013 2014 status = (((sc->sbl.ufi.asc == 0) && 2015 (sc->sbl.ufi.ascq == 0)) ? 2016 STATUS_CMD_OK : STATUS_CMD_FAILED); 2017 2018 sc->sc_transfer.ccb = NULL; 2019 2020 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2021 2022 (sc->sc_transfer.callback) 2023 (sc, ccb, residue, status); 2024 2025 break; 2026 2027 } else { 2028 2029 /* Command Interrupt Data Block */ 2030 2031 DPRINTF(sc, UDMASS_CBI, "type=0x%02x, value=0x%02x\n", 2032 sc->sbl.common.type, sc->sbl.common.value); 2033 2034 if (sc->sbl.common.type == IDB_TYPE_CCI) { 2035 2036 status = (sc->sbl.common.value & IDB_VALUE_STATUS_MASK); 2037 2038 status = ((status == IDB_VALUE_PASS) ? STATUS_CMD_OK : 2039 (status == IDB_VALUE_FAIL) ? STATUS_CMD_FAILED : 2040 (status == IDB_VALUE_PERSISTENT) ? STATUS_CMD_FAILED : 2041 STATUS_WIRE_FAILED); 2042 2043 sc->sc_transfer.ccb = NULL; 2044 2045 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2046 2047 (sc->sc_transfer.callback) 2048 (sc, ccb, residue, status); 2049 2050 break; 2051 } 2052 } 2053 2054 /* fallthrough */ 2055 2056 case USB_ST_SETUP: 2057 tr_setup: 2058 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 2059 usbd_transfer_submit(xfer); 2060 break; 2061 2062 default: /* Error */ 2063 DPRINTF(sc, UDMASS_CBI, "Failed to read CSW: %s\n", 2064 usbd_errstr(error)); 2065 umass_tr_error(xfer, error); 2066 break; 2067 } 2068 } 2069 2070 /* 2071 * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI)) 2072 */ 2073 2074 static int 2075 umass_cam_attach_sim(struct umass_softc *sc) 2076 { 2077 struct cam_devq *devq; /* Per device Queue */ 2078 2079 /* 2080 * A HBA is attached to the CAM layer. 2081 * 2082 * The CAM layer will then after a while start probing for devices on 2083 * the bus. The number of SIMs is limited to one. 2084 */ 2085 2086 devq = cam_simq_alloc(1 /* maximum openings */ ); 2087 if (devq == NULL) { 2088 return (ENOMEM); 2089 } 2090 sc->sc_sim = cam_sim_alloc 2091 (&umass_cam_action, &umass_cam_poll, 2092 DEVNAME_SIM, 2093 sc /* priv */ , 2094 sc->sc_unit /* unit number */ , 2095 &sc->sc_mtx /* mutex */ , 2096 1 /* maximum device openings */ , 2097 0 /* maximum tagged device openings */ , 2098 devq); 2099 2100 if (sc->sc_sim == NULL) { 2101 cam_simq_free(devq); 2102 return (ENOMEM); 2103 } 2104 2105 mtx_lock(&sc->sc_mtx); 2106 2107 if (xpt_bus_register(sc->sc_sim, sc->sc_dev, 2108 sc->sc_unit) != CAM_SUCCESS) { 2109 mtx_unlock(&sc->sc_mtx); 2110 return (ENOMEM); 2111 } 2112 mtx_unlock(&sc->sc_mtx); 2113 2114 return (0); 2115 } 2116 2117 static void 2118 umass_cam_attach(struct umass_softc *sc) 2119 { 2120 #ifndef USB_DEBUG 2121 if (bootverbose) 2122 #endif 2123 printf("%s:%d:%d: Attached to scbus%d\n", 2124 sc->sc_name, cam_sim_path(sc->sc_sim), 2125 sc->sc_unit, cam_sim_path(sc->sc_sim)); 2126 } 2127 2128 /* umass_cam_detach 2129 * detach from the CAM layer 2130 */ 2131 2132 static void 2133 umass_cam_detach_sim(struct umass_softc *sc) 2134 { 2135 if (sc->sc_sim != NULL) { 2136 if (xpt_bus_deregister(cam_sim_path(sc->sc_sim))) { 2137 /* accessing the softc is not possible after this */ 2138 sc->sc_sim->softc = NULL; 2139 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2140 } else { 2141 panic("%s: CAM layer is busy\n", 2142 sc->sc_name); 2143 } 2144 sc->sc_sim = NULL; 2145 } 2146 } 2147 2148 /* umass_cam_action 2149 * CAM requests for action come through here 2150 */ 2151 2152 static void 2153 umass_cam_action(struct cam_sim *sim, union ccb *ccb) 2154 { 2155 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2156 2157 if (sc == NULL) { 2158 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2159 xpt_done(ccb); 2160 return; 2161 } 2162 2163 /* Perform the requested action */ 2164 switch (ccb->ccb_h.func_code) { 2165 case XPT_SCSI_IO: 2166 { 2167 uint8_t *cmd; 2168 uint8_t dir; 2169 2170 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2171 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2172 } else { 2173 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2174 } 2175 2176 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2177 "cmd: 0x%02x, flags: 0x%02x, " 2178 "%db cmd/%db data/%db sense\n", 2179 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2180 (uintmax_t)ccb->ccb_h.target_lun, cmd[0], 2181 ccb->ccb_h.flags & CAM_DIR_MASK, ccb->csio.cdb_len, 2182 ccb->csio.dxfer_len, ccb->csio.sense_len); 2183 2184 if (sc->sc_transfer.ccb) { 2185 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2186 "I/O in progress, deferring\n", 2187 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2188 (uintmax_t)ccb->ccb_h.target_lun); 2189 ccb->ccb_h.status = CAM_SCSI_BUSY; 2190 xpt_done(ccb); 2191 goto done; 2192 } 2193 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 2194 case CAM_DIR_IN: 2195 dir = DIR_IN; 2196 break; 2197 case CAM_DIR_OUT: 2198 dir = DIR_OUT; 2199 DIF(UDMASS_SCSI, 2200 umass_dump_buffer(sc, ccb->csio.data_ptr, 2201 ccb->csio.dxfer_len, 48)); 2202 break; 2203 default: 2204 dir = DIR_NONE; 2205 } 2206 2207 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED; 2208 2209 /* 2210 * sc->sc_transform will convert the command to the 2211 * command format needed by the specific command set 2212 * and return the converted command in 2213 * "sc->sc_transfer.cmd_data" 2214 */ 2215 if (umass_std_transform(sc, ccb, cmd, ccb->csio.cdb_len)) { 2216 2217 if (sc->sc_transfer.cmd_data[0] == INQUIRY) { 2218 const char *pserial; 2219 2220 pserial = usb_get_serial(sc->sc_udev); 2221 2222 /* 2223 * Umass devices don't generally report their serial numbers 2224 * in the usual SCSI way. Emulate it here. 2225 */ 2226 if ((sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2227 (sc->sc_transfer.cmd_data[2] == SVPD_UNIT_SERIAL_NUMBER) && 2228 (pserial[0] != '\0')) { 2229 struct scsi_vpd_unit_serial_number *vpd_serial; 2230 2231 vpd_serial = (struct scsi_vpd_unit_serial_number *)ccb->csio.data_ptr; 2232 vpd_serial->length = strlen(pserial); 2233 if (vpd_serial->length > sizeof(vpd_serial->serial_num)) 2234 vpd_serial->length = sizeof(vpd_serial->serial_num); 2235 memcpy(vpd_serial->serial_num, pserial, vpd_serial->length); 2236 ccb->csio.scsi_status = SCSI_STATUS_OK; 2237 ccb->ccb_h.status = CAM_REQ_CMP; 2238 xpt_done(ccb); 2239 goto done; 2240 } 2241 2242 /* 2243 * Handle EVPD inquiry for broken devices first 2244 * NO_INQUIRY also implies NO_INQUIRY_EVPD 2245 */ 2246 if ((sc->sc_quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) && 2247 (sc->sc_transfer.cmd_data[1] & SI_EVPD)) { 2248 2249 scsi_set_sense_data(&ccb->csio.sense_data, 2250 /*sense_format*/ SSD_TYPE_NONE, 2251 /*current_error*/ 1, 2252 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST, 2253 /*asc*/ 0x24, 2254 /*ascq*/ 0x00, 2255 /*extra args*/ SSD_ELEM_NONE); 2256 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2257 ccb->ccb_h.status = 2258 CAM_SCSI_STATUS_ERROR | 2259 CAM_AUTOSNS_VALID | 2260 CAM_DEV_QFRZN; 2261 xpt_freeze_devq(ccb->ccb_h.path, 1); 2262 xpt_done(ccb); 2263 goto done; 2264 } 2265 /* 2266 * Return fake inquiry data for 2267 * broken devices 2268 */ 2269 if (sc->sc_quirks & NO_INQUIRY) { 2270 memcpy(ccb->csio.data_ptr, &fake_inq_data, 2271 sizeof(fake_inq_data)); 2272 ccb->csio.scsi_status = SCSI_STATUS_OK; 2273 ccb->ccb_h.status = CAM_REQ_CMP; 2274 xpt_done(ccb); 2275 goto done; 2276 } 2277 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2278 ccb->csio.dxfer_len = SHORT_INQUIRY_LENGTH; 2279 } 2280 } else if (sc->sc_transfer.cmd_data[0] == PREVENT_ALLOW) { 2281 if (sc->sc_quirks & NO_PREVENT_ALLOW) { 2282 ccb->csio.scsi_status = SCSI_STATUS_OK; 2283 ccb->ccb_h.status = CAM_REQ_CMP; 2284 xpt_done(ccb); 2285 goto done; 2286 } 2287 } else if (sc->sc_transfer.cmd_data[0] == SYNCHRONIZE_CACHE) { 2288 if (sc->sc_quirks & NO_SYNCHRONIZE_CACHE) { 2289 ccb->csio.scsi_status = SCSI_STATUS_OK; 2290 ccb->ccb_h.status = CAM_REQ_CMP; 2291 xpt_done(ccb); 2292 goto done; 2293 } 2294 } 2295 umass_command_start(sc, dir, ccb->csio.data_ptr, 2296 ccb->csio.dxfer_len, 2297 ccb->ccb_h.timeout, 2298 &umass_cam_cb, ccb); 2299 } 2300 break; 2301 } 2302 case XPT_PATH_INQ: 2303 { 2304 struct ccb_pathinq *cpi = &ccb->cpi; 2305 2306 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_PATH_INQ:.\n", 2307 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2308 (uintmax_t)ccb->ccb_h.target_lun); 2309 2310 /* host specific information */ 2311 cpi->version_num = 1; 2312 cpi->hba_inquiry = 0; 2313 cpi->target_sprt = 0; 2314 cpi->hba_misc = PIM_NO_6_BYTE; 2315 cpi->hba_eng_cnt = 0; 2316 cpi->max_target = UMASS_SCSIID_MAX; /* one target */ 2317 cpi->initiator_id = UMASS_SCSIID_HOST; 2318 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2319 strlcpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN); 2320 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2321 cpi->unit_number = cam_sim_unit(sim); 2322 cpi->bus_id = sc->sc_unit; 2323 cpi->protocol = PROTO_SCSI; 2324 cpi->protocol_version = SCSI_REV_2; 2325 cpi->transport = XPORT_USB; 2326 cpi->transport_version = 0; 2327 2328 if (sc == NULL) { 2329 cpi->base_transfer_speed = 0; 2330 cpi->max_lun = 0; 2331 } else { 2332 if (sc->sc_quirks & FLOPPY_SPEED) { 2333 cpi->base_transfer_speed = 2334 UMASS_FLOPPY_TRANSFER_SPEED; 2335 } else { 2336 switch (usbd_get_speed(sc->sc_udev)) { 2337 case USB_SPEED_SUPER: 2338 cpi->base_transfer_speed = 2339 UMASS_SUPER_TRANSFER_SPEED; 2340 cpi->maxio = MAXPHYS; 2341 break; 2342 case USB_SPEED_HIGH: 2343 cpi->base_transfer_speed = 2344 UMASS_HIGH_TRANSFER_SPEED; 2345 break; 2346 default: 2347 cpi->base_transfer_speed = 2348 UMASS_FULL_TRANSFER_SPEED; 2349 break; 2350 } 2351 } 2352 cpi->max_lun = sc->sc_maxlun; 2353 } 2354 2355 cpi->ccb_h.status = CAM_REQ_CMP; 2356 xpt_done(ccb); 2357 break; 2358 } 2359 case XPT_RESET_DEV: 2360 { 2361 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_RESET_DEV:.\n", 2362 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2363 (uintmax_t)ccb->ccb_h.target_lun); 2364 2365 umass_reset(sc); 2366 2367 ccb->ccb_h.status = CAM_REQ_CMP; 2368 xpt_done(ccb); 2369 break; 2370 } 2371 case XPT_GET_TRAN_SETTINGS: 2372 { 2373 struct ccb_trans_settings *cts = &ccb->cts; 2374 2375 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_GET_TRAN_SETTINGS:.\n", 2376 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2377 (uintmax_t)ccb->ccb_h.target_lun); 2378 2379 cts->protocol = PROTO_SCSI; 2380 cts->protocol_version = SCSI_REV_2; 2381 cts->transport = XPORT_USB; 2382 cts->transport_version = 0; 2383 cts->xport_specific.valid = 0; 2384 2385 ccb->ccb_h.status = CAM_REQ_CMP; 2386 xpt_done(ccb); 2387 break; 2388 } 2389 case XPT_SET_TRAN_SETTINGS: 2390 { 2391 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SET_TRAN_SETTINGS:.\n", 2392 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2393 (uintmax_t)ccb->ccb_h.target_lun); 2394 2395 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2396 xpt_done(ccb); 2397 break; 2398 } 2399 case XPT_CALC_GEOMETRY: 2400 { 2401 cam_calc_geometry(&ccb->ccg, /* extended */ 1); 2402 xpt_done(ccb); 2403 break; 2404 } 2405 case XPT_NOOP: 2406 { 2407 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_NOOP:.\n", 2408 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2409 (uintmax_t)ccb->ccb_h.target_lun); 2410 2411 ccb->ccb_h.status = CAM_REQ_CMP; 2412 xpt_done(ccb); 2413 break; 2414 } 2415 default: 2416 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:func_code 0x%04x: " 2417 "Not implemented\n", 2418 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2419 (uintmax_t)ccb->ccb_h.target_lun, ccb->ccb_h.func_code); 2420 2421 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2422 xpt_done(ccb); 2423 break; 2424 } 2425 2426 done: 2427 return; 2428 } 2429 2430 static void 2431 umass_cam_poll(struct cam_sim *sim) 2432 { 2433 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2434 2435 if (sc == NULL) 2436 return; 2437 2438 DPRINTF(sc, UDMASS_SCSI, "CAM poll\n"); 2439 2440 usbd_transfer_poll(sc->sc_xfer, UMASS_T_MAX); 2441 } 2442 2443 2444 /* umass_cam_cb 2445 * finalise a completed CAM command 2446 */ 2447 2448 static void 2449 umass_cam_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2450 uint8_t status) 2451 { 2452 ccb->csio.resid = residue; 2453 2454 switch (status) { 2455 case STATUS_CMD_OK: 2456 ccb->ccb_h.status = CAM_REQ_CMP; 2457 if ((sc->sc_quirks & READ_CAPACITY_OFFBY1) && 2458 (ccb->ccb_h.func_code == XPT_SCSI_IO) && 2459 (ccb->csio.cdb_io.cdb_bytes[0] == READ_CAPACITY)) { 2460 struct scsi_read_capacity_data *rcap; 2461 uint32_t maxsector; 2462 2463 rcap = (void *)(ccb->csio.data_ptr); 2464 maxsector = scsi_4btoul(rcap->addr) - 1; 2465 scsi_ulto4b(maxsector, rcap->addr); 2466 } 2467 /* 2468 * We have to add SVPD_UNIT_SERIAL_NUMBER to the list 2469 * of pages supported by the device - otherwise, CAM 2470 * will never ask us for the serial number if the 2471 * device cannot handle that by itself. 2472 */ 2473 if (ccb->ccb_h.func_code == XPT_SCSI_IO && 2474 sc->sc_transfer.cmd_data[0] == INQUIRY && 2475 (sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2476 sc->sc_transfer.cmd_data[2] == SVPD_SUPPORTED_PAGE_LIST && 2477 (usb_get_serial(sc->sc_udev)[0] != '\0')) { 2478 struct ccb_scsiio *csio; 2479 struct scsi_vpd_supported_page_list *page_list; 2480 2481 csio = &ccb->csio; 2482 page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; 2483 if (page_list->length + 1 < SVPD_SUPPORTED_PAGES_SIZE) { 2484 page_list->list[page_list->length] = SVPD_UNIT_SERIAL_NUMBER; 2485 page_list->length++; 2486 } 2487 } 2488 xpt_done(ccb); 2489 break; 2490 2491 case STATUS_CMD_UNKNOWN: 2492 case STATUS_CMD_FAILED: 2493 2494 /* fetch sense data */ 2495 2496 /* the rest of the command was filled in at attach */ 2497 sc->cam_scsi_sense.length = ccb->csio.sense_len; 2498 2499 DPRINTF(sc, UDMASS_SCSI, "Fetching %d bytes of " 2500 "sense data\n", ccb->csio.sense_len); 2501 2502 if (umass_std_transform(sc, ccb, &sc->cam_scsi_sense.opcode, 2503 sizeof(sc->cam_scsi_sense))) { 2504 2505 if ((sc->sc_quirks & FORCE_SHORT_INQUIRY) && 2506 (sc->sc_transfer.cmd_data[0] == INQUIRY)) { 2507 ccb->csio.sense_len = SHORT_INQUIRY_LENGTH; 2508 } 2509 umass_command_start(sc, DIR_IN, &ccb->csio.sense_data.error_code, 2510 ccb->csio.sense_len, ccb->ccb_h.timeout, 2511 &umass_cam_sense_cb, ccb); 2512 } 2513 break; 2514 2515 default: 2516 /* 2517 * The wire protocol failed and will hopefully have 2518 * recovered. We return an error to CAM and let CAM 2519 * retry the command if necessary. 2520 */ 2521 xpt_freeze_devq(ccb->ccb_h.path, 1); 2522 ccb->ccb_h.status = CAM_REQ_CMP_ERR | CAM_DEV_QFRZN; 2523 xpt_done(ccb); 2524 break; 2525 } 2526 } 2527 2528 /* 2529 * Finalise a completed autosense operation 2530 */ 2531 static void 2532 umass_cam_sense_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2533 uint8_t status) 2534 { 2535 uint8_t *cmd; 2536 2537 switch (status) { 2538 case STATUS_CMD_OK: 2539 case STATUS_CMD_UNKNOWN: 2540 case STATUS_CMD_FAILED: { 2541 int key, sense_len; 2542 2543 ccb->csio.sense_resid = residue; 2544 sense_len = ccb->csio.sense_len - ccb->csio.sense_resid; 2545 key = scsi_get_sense_key(&ccb->csio.sense_data, sense_len, 2546 /*show_errors*/ 1); 2547 2548 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2549 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2550 } else { 2551 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2552 } 2553 2554 /* 2555 * Getting sense data always succeeds (apart from wire 2556 * failures): 2557 */ 2558 if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2559 (cmd[0] == INQUIRY) && 2560 (key == SSD_KEY_UNIT_ATTENTION)) { 2561 /* 2562 * Ignore unit attention errors in the case where 2563 * the Unit Attention state is not cleared on 2564 * REQUEST SENSE. They will appear again at the next 2565 * command. 2566 */ 2567 ccb->ccb_h.status = CAM_REQ_CMP; 2568 } else if (key == SSD_KEY_NO_SENSE) { 2569 /* 2570 * No problem after all (in the case of CBI without 2571 * CCI) 2572 */ 2573 ccb->ccb_h.status = CAM_REQ_CMP; 2574 } else if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2575 (cmd[0] == READ_CAPACITY) && 2576 (key == SSD_KEY_UNIT_ATTENTION)) { 2577 /* 2578 * Some devices do not clear the unit attention error 2579 * on request sense. We insert a test unit ready 2580 * command to make sure we clear the unit attention 2581 * condition, then allow the retry to proceed as 2582 * usual. 2583 */ 2584 2585 xpt_freeze_devq(ccb->ccb_h.path, 1); 2586 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2587 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2588 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2589 2590 #if 0 2591 DELAY(300000); 2592 #endif 2593 DPRINTF(sc, UDMASS_SCSI, "Doing a sneaky" 2594 "TEST_UNIT_READY\n"); 2595 2596 /* the rest of the command was filled in at attach */ 2597 2598 if ((sc->sc_transform)(sc, 2599 &sc->cam_scsi_test_unit_ready.opcode, 2600 sizeof(sc->cam_scsi_test_unit_ready)) == 1) { 2601 umass_command_start(sc, DIR_NONE, NULL, 0, 2602 ccb->ccb_h.timeout, 2603 &umass_cam_quirk_cb, ccb); 2604 break; 2605 } 2606 } else { 2607 xpt_freeze_devq(ccb->ccb_h.path, 1); 2608 if (key >= 0) { 2609 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2610 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2611 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2612 } else 2613 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL 2614 | CAM_DEV_QFRZN; 2615 } 2616 xpt_done(ccb); 2617 break; 2618 } 2619 default: 2620 DPRINTF(sc, UDMASS_SCSI, "Autosense failed, " 2621 "status %d\n", status); 2622 xpt_freeze_devq(ccb->ccb_h.path, 1); 2623 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL | CAM_DEV_QFRZN; 2624 xpt_done(ccb); 2625 } 2626 } 2627 2628 /* 2629 * This completion code just handles the fact that we sent a test-unit-ready 2630 * after having previously failed a READ CAPACITY with CHECK_COND. The CCB 2631 * status for CAM is already set earlier. 2632 */ 2633 static void 2634 umass_cam_quirk_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2635 uint8_t status) 2636 { 2637 DPRINTF(sc, UDMASS_SCSI, "Test unit ready " 2638 "returned status %d\n", status); 2639 2640 xpt_done(ccb); 2641 } 2642 2643 /* 2644 * SCSI specific functions 2645 */ 2646 2647 static uint8_t 2648 umass_scsi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2649 uint8_t cmd_len) 2650 { 2651 if ((cmd_len == 0) || 2652 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2653 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2654 "length: %d bytes\n", cmd_len); 2655 return (0); /* failure */ 2656 } 2657 sc->sc_transfer.cmd_len = cmd_len; 2658 2659 switch (cmd_ptr[0]) { 2660 case TEST_UNIT_READY: 2661 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2662 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2663 "to START_UNIT\n"); 2664 memset(sc->sc_transfer.cmd_data, 0, cmd_len); 2665 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2666 sc->sc_transfer.cmd_data[4] = SSS_START; 2667 return (1); 2668 } 2669 break; 2670 2671 case INQUIRY: 2672 /* 2673 * some drives wedge when asked for full inquiry 2674 * information. 2675 */ 2676 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2677 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2678 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2679 return (1); 2680 } 2681 break; 2682 } 2683 2684 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2685 return (1); 2686 } 2687 2688 static uint8_t 2689 umass_rbc_transform(struct umass_softc *sc, uint8_t *cmd_ptr, uint8_t cmd_len) 2690 { 2691 if ((cmd_len == 0) || 2692 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2693 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2694 "length: %d bytes\n", cmd_len); 2695 return (0); /* failure */ 2696 } 2697 switch (cmd_ptr[0]) { 2698 /* these commands are defined in RBC: */ 2699 case READ_10: 2700 case READ_CAPACITY: 2701 case START_STOP_UNIT: 2702 case SYNCHRONIZE_CACHE: 2703 case WRITE_10: 2704 case VERIFY_10: 2705 case INQUIRY: 2706 case MODE_SELECT_10: 2707 case MODE_SENSE_10: 2708 case TEST_UNIT_READY: 2709 case WRITE_BUFFER: 2710 /* 2711 * The following commands are not listed in my copy of the 2712 * RBC specs. CAM however seems to want those, and at least 2713 * the Sony DSC device appears to support those as well 2714 */ 2715 case REQUEST_SENSE: 2716 case PREVENT_ALLOW: 2717 2718 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2719 2720 if ((sc->sc_quirks & RBC_PAD_TO_12) && (cmd_len < 12)) { 2721 memset(sc->sc_transfer.cmd_data + cmd_len, 2722 0, 12 - cmd_len); 2723 cmd_len = 12; 2724 } 2725 sc->sc_transfer.cmd_len = cmd_len; 2726 return (1); /* success */ 2727 2728 /* All other commands are not legal in RBC */ 2729 default: 2730 DPRINTF(sc, UDMASS_SCSI, "Unsupported RBC " 2731 "command 0x%02x\n", cmd_ptr[0]); 2732 return (0); /* failure */ 2733 } 2734 } 2735 2736 static uint8_t 2737 umass_ufi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2738 uint8_t cmd_len) 2739 { 2740 if ((cmd_len == 0) || 2741 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2742 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2743 "length: %d bytes\n", cmd_len); 2744 return (0); /* failure */ 2745 } 2746 /* An UFI command is always 12 bytes in length */ 2747 sc->sc_transfer.cmd_len = UFI_COMMAND_LENGTH; 2748 2749 /* Zero the command data */ 2750 memset(sc->sc_transfer.cmd_data, 0, UFI_COMMAND_LENGTH); 2751 2752 switch (cmd_ptr[0]) { 2753 /* 2754 * Commands of which the format has been verified. They 2755 * should work. Copy the command into the (zeroed out) 2756 * destination buffer. 2757 */ 2758 case TEST_UNIT_READY: 2759 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2760 /* 2761 * Some devices do not support this command. Start 2762 * Stop Unit should give the same results 2763 */ 2764 DPRINTF(sc, UDMASS_UFI, "Converted TEST_UNIT_READY " 2765 "to START_UNIT\n"); 2766 2767 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2768 sc->sc_transfer.cmd_data[4] = SSS_START; 2769 return (1); 2770 } 2771 break; 2772 2773 case REZERO_UNIT: 2774 case REQUEST_SENSE: 2775 case FORMAT_UNIT: 2776 case INQUIRY: 2777 case START_STOP_UNIT: 2778 case SEND_DIAGNOSTIC: 2779 case PREVENT_ALLOW: 2780 case READ_CAPACITY: 2781 case READ_10: 2782 case WRITE_10: 2783 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2784 case WRITE_AND_VERIFY: 2785 case VERIFY: 2786 case MODE_SELECT_10: 2787 case MODE_SENSE_10: 2788 case READ_12: 2789 case WRITE_12: 2790 case READ_FORMAT_CAPACITIES: 2791 break; 2792 2793 /* 2794 * SYNCHRONIZE_CACHE isn't supported by UFI, nor should it be 2795 * required for UFI devices, so it is appropriate to fake 2796 * success. 2797 */ 2798 case SYNCHRONIZE_CACHE: 2799 return (2); 2800 2801 default: 2802 DPRINTF(sc, UDMASS_SCSI, "Unsupported UFI " 2803 "command 0x%02x\n", cmd_ptr[0]); 2804 return (0); /* failure */ 2805 } 2806 2807 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2808 return (1); /* success */ 2809 } 2810 2811 /* 2812 * 8070i (ATAPI) specific functions 2813 */ 2814 static uint8_t 2815 umass_atapi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2816 uint8_t cmd_len) 2817 { 2818 if ((cmd_len == 0) || 2819 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2820 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2821 "length: %d bytes\n", cmd_len); 2822 return (0); /* failure */ 2823 } 2824 /* An ATAPI command is always 12 bytes in length. */ 2825 sc->sc_transfer.cmd_len = ATAPI_COMMAND_LENGTH; 2826 2827 /* Zero the command data */ 2828 memset(sc->sc_transfer.cmd_data, 0, ATAPI_COMMAND_LENGTH); 2829 2830 switch (cmd_ptr[0]) { 2831 /* 2832 * Commands of which the format has been verified. They 2833 * should work. Copy the command into the destination 2834 * buffer. 2835 */ 2836 case INQUIRY: 2837 /* 2838 * some drives wedge when asked for full inquiry 2839 * information. 2840 */ 2841 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2842 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2843 2844 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2845 return (1); 2846 } 2847 break; 2848 2849 case TEST_UNIT_READY: 2850 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2851 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2852 "to START_UNIT\n"); 2853 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2854 sc->sc_transfer.cmd_data[4] = SSS_START; 2855 return (1); 2856 } 2857 break; 2858 2859 case REZERO_UNIT: 2860 case REQUEST_SENSE: 2861 case START_STOP_UNIT: 2862 case SEND_DIAGNOSTIC: 2863 case PREVENT_ALLOW: 2864 case READ_CAPACITY: 2865 case READ_10: 2866 case WRITE_10: 2867 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2868 case SYNCHRONIZE_CACHE: 2869 case MODE_SELECT_10: 2870 case MODE_SENSE_10: 2871 case READ_BUFFER: 2872 case 0x42: /* READ_SUBCHANNEL */ 2873 case 0x43: /* READ_TOC */ 2874 case 0x44: /* READ_HEADER */ 2875 case 0x47: /* PLAY_MSF (Play Minute/Second/Frame) */ 2876 case 0x48: /* PLAY_TRACK */ 2877 case 0x49: /* PLAY_TRACK_REL */ 2878 case 0x4b: /* PAUSE */ 2879 case 0x51: /* READ_DISK_INFO */ 2880 case 0x52: /* READ_TRACK_INFO */ 2881 case 0x54: /* SEND_OPC */ 2882 case 0x59: /* READ_MASTER_CUE */ 2883 case 0x5b: /* CLOSE_TR_SESSION */ 2884 case 0x5c: /* READ_BUFFER_CAP */ 2885 case 0x5d: /* SEND_CUE_SHEET */ 2886 case 0xa1: /* BLANK */ 2887 case 0xa5: /* PLAY_12 */ 2888 case 0xa6: /* EXCHANGE_MEDIUM */ 2889 case 0xad: /* READ_DVD_STRUCTURE */ 2890 case 0xbb: /* SET_CD_SPEED */ 2891 case 0xe5: /* READ_TRACK_INFO_PHILIPS */ 2892 break; 2893 2894 case READ_12: 2895 case WRITE_12: 2896 default: 2897 DPRINTF(sc, UDMASS_SCSI, "Unsupported ATAPI " 2898 "command 0x%02x - trying anyway\n", 2899 cmd_ptr[0]); 2900 break; 2901 } 2902 2903 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2904 return (1); /* success */ 2905 } 2906 2907 static uint8_t 2908 umass_no_transform(struct umass_softc *sc, uint8_t *cmd, 2909 uint8_t cmdlen) 2910 { 2911 return (0); /* failure */ 2912 } 2913 2914 static uint8_t 2915 umass_std_transform(struct umass_softc *sc, union ccb *ccb, 2916 uint8_t *cmd, uint8_t cmdlen) 2917 { 2918 uint8_t retval; 2919 2920 retval = (sc->sc_transform) (sc, cmd, cmdlen); 2921 2922 if (retval == 2) { 2923 ccb->ccb_h.status = CAM_REQ_CMP; 2924 xpt_done(ccb); 2925 return (0); 2926 } else if (retval == 0) { 2927 xpt_freeze_devq(ccb->ccb_h.path, 1); 2928 ccb->ccb_h.status = CAM_REQ_INVALID | CAM_DEV_QFRZN; 2929 xpt_done(ccb); 2930 return (0); 2931 } 2932 /* Command should be executed */ 2933 return (1); 2934 } 2935 2936 #ifdef USB_DEBUG 2937 static void 2938 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2939 { 2940 uint8_t *c = cbw->CBWCDB; 2941 2942 uint32_t dlen = UGETDW(cbw->dCBWDataTransferLength); 2943 uint32_t tag = UGETDW(cbw->dCBWTag); 2944 2945 uint8_t clen = cbw->bCDBLength; 2946 uint8_t flags = cbw->bCBWFlags; 2947 uint8_t lun = cbw->bCBWLUN; 2948 2949 DPRINTF(sc, UDMASS_BBB, "CBW %d: cmd = %db " 2950 "(0x%02x%02x%02x%02x%02x%02x%s), " 2951 "data = %db, lun = %d, dir = %s\n", 2952 tag, clen, 2953 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6 ? "..." : ""), 2954 dlen, lun, (flags == CBWFLAGS_IN ? "in" : 2955 (flags == CBWFLAGS_OUT ? "out" : "<invalid>"))); 2956 } 2957 2958 static void 2959 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2960 { 2961 uint32_t sig = UGETDW(csw->dCSWSignature); 2962 uint32_t tag = UGETDW(csw->dCSWTag); 2963 uint32_t res = UGETDW(csw->dCSWDataResidue); 2964 uint8_t status = csw->bCSWStatus; 2965 2966 DPRINTF(sc, UDMASS_BBB, "CSW %d: sig = 0x%08x (%s), tag = 0x%08x, " 2967 "res = %d, status = 0x%02x (%s)\n", 2968 tag, sig, (sig == CSWSIGNATURE ? "valid" : "invalid"), 2969 tag, res, 2970 status, (status == CSWSTATUS_GOOD ? "good" : 2971 (status == CSWSTATUS_FAILED ? "failed" : 2972 (status == CSWSTATUS_PHASE ? "phase" : "<invalid>")))); 2973 } 2974 2975 static void 2976 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, uint8_t cmdlen) 2977 { 2978 uint8_t *c = cmd; 2979 uint8_t dir = sc->sc_transfer.dir; 2980 2981 DPRINTF(sc, UDMASS_BBB, "cmd = %db " 2982 "(0x%02x%02x%02x%02x%02x%02x%s), " 2983 "data = %db, dir = %s\n", 2984 cmdlen, 2985 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6 ? "..." : ""), 2986 sc->sc_transfer.data_len, 2987 (dir == DIR_IN ? "in" : 2988 (dir == DIR_OUT ? "out" : 2989 (dir == DIR_NONE ? "no data phase" : "<invalid>")))); 2990 } 2991 2992 static void 2993 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, uint32_t buflen, 2994 uint32_t printlen) 2995 { 2996 uint32_t i, j; 2997 char s1[40]; 2998 char s2[40]; 2999 char s3[5]; 3000 3001 s1[0] = '\0'; 3002 s3[0] = '\0'; 3003 3004 sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen); 3005 for (i = 0; (i < buflen) && (i < printlen); i++) { 3006 j = i % 16; 3007 if (j == 0 && i != 0) { 3008 DPRINTF(sc, UDMASS_GEN, "0x %s%s\n", 3009 s1, s2); 3010 s2[0] = '\0'; 3011 } 3012 sprintf(&s1[j * 2], "%02x", buffer[i] & 0xff); 3013 } 3014 if (buflen > printlen) 3015 sprintf(s3, " ..."); 3016 DPRINTF(sc, UDMASS_GEN, "0x %s%s%s\n", 3017 s1, s2, s3); 3018 } 3019 3020 #endif 3021