1 #include <sys/cdefs.h> 2 __FBSDID("$FreeBSD$"); 3 4 /*- 5 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 6 * 7 * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>, 8 * Nick Hibma <n_hibma@FreeBSD.org> 9 * All rights reserved. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 24 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 25 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 26 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 27 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 28 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 29 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 30 * SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $ 34 */ 35 36 /* Also already merged from NetBSD: 37 * $NetBSD: umass.c,v 1.67 2001/11/25 19:05:22 augustss Exp $ 38 * $NetBSD: umass.c,v 1.90 2002/11/04 19:17:33 pooka Exp $ 39 * $NetBSD: umass.c,v 1.108 2003/11/07 17:03:25 wiz Exp $ 40 * $NetBSD: umass.c,v 1.109 2003/12/04 13:57:31 keihan Exp $ 41 */ 42 43 /* 44 * Universal Serial Bus Mass Storage Class specs: 45 * http://www.usb.org/developers/devclass_docs/usb_msc_overview_1.2.pdf 46 * http://www.usb.org/developers/devclass_docs/usbmassbulk_10.pdf 47 * http://www.usb.org/developers/devclass_docs/usb_msc_cbi_1.1.pdf 48 * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf 49 */ 50 51 /* 52 * Ported to NetBSD by Lennart Augustsson <augustss@NetBSD.org>. 53 * Parts of the code written by Jason R. Thorpe <thorpej@shagadelic.org>. 54 */ 55 56 /* 57 * The driver handles 3 Wire Protocols 58 * - Command/Bulk/Interrupt (CBI) 59 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 60 * - Mass Storage Bulk-Only (BBB) 61 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 62 * 63 * Over these wire protocols it handles the following command protocols 64 * - SCSI 65 * - UFI (floppy command set) 66 * - 8070i (ATAPI) 67 * 68 * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The 69 * sc->sc_transform method is used to convert the commands into the appropriate 70 * format (if at all necessary). For example, UFI requires all commands to be 71 * 12 bytes in length amongst other things. 72 * 73 * The source code below is marked and can be split into a number of pieces 74 * (in this order): 75 * 76 * - probe/attach/detach 77 * - generic transfer routines 78 * - BBB 79 * - CBI 80 * - CBI_I (in addition to functions from CBI) 81 * - CAM (Common Access Method) 82 * - SCSI 83 * - UFI 84 * - 8070i (ATAPI) 85 * 86 * The protocols are implemented using a state machine, for the transfers as 87 * well as for the resets. The state machine is contained in umass_t_*_callback. 88 * The state machine is started through either umass_command_start() or 89 * umass_reset(). 90 * 91 * The reason for doing this is a) CAM performs a lot better this way and b) it 92 * avoids using tsleep from interrupt context (for example after a failed 93 * transfer). 94 */ 95 96 /* 97 * The SCSI related part of this driver has been derived from the 98 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@FreeBSD.org). 99 * 100 * The CAM layer uses so called actions which are messages sent to the host 101 * adapter for completion. The actions come in through umass_cam_action. The 102 * appropriate block of routines is called depending on the transport protocol 103 * in use. When the transfer has finished, these routines call 104 * umass_cam_cb again to complete the CAM command. 105 */ 106 107 #include <sys/stdint.h> 108 #include <sys/stddef.h> 109 #include <sys/param.h> 110 #include <sys/queue.h> 111 #include <sys/types.h> 112 #include <sys/systm.h> 113 #include <sys/kernel.h> 114 #include <sys/bus.h> 115 #include <sys/module.h> 116 #include <sys/lock.h> 117 #include <sys/mutex.h> 118 #include <sys/condvar.h> 119 #include <sys/sysctl.h> 120 #include <sys/sx.h> 121 #include <sys/unistd.h> 122 #include <sys/callout.h> 123 #include <sys/malloc.h> 124 #include <sys/priv.h> 125 126 #include <dev/usb/usb.h> 127 #include <dev/usb/usbdi.h> 128 #include <dev/usb/usbdi_util.h> 129 #include "usbdevs.h" 130 131 #include <dev/usb/quirk/usb_quirk.h> 132 133 #include <cam/cam.h> 134 #include <cam/cam_ccb.h> 135 #include <cam/cam_sim.h> 136 #include <cam/cam_xpt_sim.h> 137 #include <cam/scsi/scsi_all.h> 138 #include <cam/scsi/scsi_da.h> 139 140 #include <cam/cam_periph.h> 141 142 #ifdef USB_DEBUG 143 #define DIF(m, x) \ 144 do { \ 145 if (umass_debug & (m)) { x ; } \ 146 } while (0) 147 148 #define DPRINTF(sc, m, fmt, ...) \ 149 do { \ 150 if (umass_debug & (m)) { \ 151 printf("%s:%s: " fmt, \ 152 (sc) ? (const char *)(sc)->sc_name : \ 153 (const char *)"umassX", \ 154 __FUNCTION__ ,## __VA_ARGS__); \ 155 } \ 156 } while (0) 157 158 #define UDMASS_GEN 0x00010000 /* general */ 159 #define UDMASS_SCSI 0x00020000 /* scsi */ 160 #define UDMASS_UFI 0x00040000 /* ufi command set */ 161 #define UDMASS_ATAPI 0x00080000 /* 8070i command set */ 162 #define UDMASS_CMD (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI) 163 #define UDMASS_USB 0x00100000 /* USB general */ 164 #define UDMASS_BBB 0x00200000 /* Bulk-Only transfers */ 165 #define UDMASS_CBI 0x00400000 /* CBI transfers */ 166 #define UDMASS_WIRE (UDMASS_BBB|UDMASS_CBI) 167 #define UDMASS_ALL 0xffff0000 /* all of the above */ 168 static int umass_debug; 169 static int umass_throttle; 170 171 static SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 172 "USB umass"); 173 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RWTUN, 174 &umass_debug, 0, "umass debug level"); 175 SYSCTL_INT(_hw_usb_umass, OID_AUTO, throttle, CTLFLAG_RWTUN, 176 &umass_throttle, 0, "Forced delay between commands in milliseconds"); 177 #else 178 #define DIF(...) do { } while (0) 179 #define DPRINTF(...) do { } while (0) 180 #endif 181 182 #define UMASS_BULK_SIZE (1 << 17) 183 #define UMASS_CBI_DIAGNOSTIC_CMDLEN 12 /* bytes */ 184 #define UMASS_MAX_CMDLEN MAX(12, CAM_MAX_CDBLEN) /* bytes */ 185 186 /* USB transfer definitions */ 187 188 #define UMASS_T_BBB_RESET1 0 /* Bulk-Only */ 189 #define UMASS_T_BBB_RESET2 1 190 #define UMASS_T_BBB_RESET3 2 191 #define UMASS_T_BBB_COMMAND 3 192 #define UMASS_T_BBB_DATA_READ 4 193 #define UMASS_T_BBB_DATA_RD_CS 5 194 #define UMASS_T_BBB_DATA_WRITE 6 195 #define UMASS_T_BBB_DATA_WR_CS 7 196 #define UMASS_T_BBB_STATUS 8 197 #define UMASS_T_BBB_MAX 9 198 199 #define UMASS_T_CBI_RESET1 0 /* CBI */ 200 #define UMASS_T_CBI_RESET2 1 201 #define UMASS_T_CBI_RESET3 2 202 #define UMASS_T_CBI_COMMAND 3 203 #define UMASS_T_CBI_DATA_READ 4 204 #define UMASS_T_CBI_DATA_RD_CS 5 205 #define UMASS_T_CBI_DATA_WRITE 6 206 #define UMASS_T_CBI_DATA_WR_CS 7 207 #define UMASS_T_CBI_STATUS 8 208 #define UMASS_T_CBI_RESET4 9 209 #define UMASS_T_CBI_MAX 10 210 211 #define UMASS_T_MAX MAX(UMASS_T_CBI_MAX, UMASS_T_BBB_MAX) 212 213 /* Generic definitions */ 214 215 /* Direction for transfer */ 216 #define DIR_NONE 0 217 #define DIR_IN 1 218 #define DIR_OUT 2 219 220 /* device name */ 221 #define DEVNAME "umass" 222 #define DEVNAME_SIM "umass-sim" 223 224 /* Approximate maximum transfer speeds (assumes 33% overhead). */ 225 #define UMASS_FULL_TRANSFER_SPEED 1000 226 #define UMASS_HIGH_TRANSFER_SPEED 40000 227 #define UMASS_SUPER_TRANSFER_SPEED 400000 228 #define UMASS_FLOPPY_TRANSFER_SPEED 20 229 230 #define UMASS_TIMEOUT 5000 /* ms */ 231 232 /* CAM specific definitions */ 233 234 #define UMASS_SCSIID_MAX 1 /* maximum number of drives expected */ 235 #define UMASS_SCSIID_HOST UMASS_SCSIID_MAX 236 237 /* Bulk-Only features */ 238 239 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 240 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 241 242 /* Command Block Wrapper */ 243 typedef struct { 244 uDWord dCBWSignature; 245 #define CBWSIGNATURE 0x43425355 246 uDWord dCBWTag; 247 uDWord dCBWDataTransferLength; 248 uByte bCBWFlags; 249 #define CBWFLAGS_OUT 0x00 250 #define CBWFLAGS_IN 0x80 251 uByte bCBWLUN; 252 uByte bCDBLength; 253 #define CBWCDBLENGTH 16 254 uByte CBWCDB[CBWCDBLENGTH]; 255 } __packed umass_bbb_cbw_t; 256 257 #define UMASS_BBB_CBW_SIZE 31 258 259 /* Command Status Wrapper */ 260 typedef struct { 261 uDWord dCSWSignature; 262 #define CSWSIGNATURE 0x53425355 263 #define CSWSIGNATURE_IMAGINATION_DBX1 0x43425355 264 #define CSWSIGNATURE_OLYMPUS_C1 0x55425355 265 uDWord dCSWTag; 266 uDWord dCSWDataResidue; 267 uByte bCSWStatus; 268 #define CSWSTATUS_GOOD 0x0 269 #define CSWSTATUS_FAILED 0x1 270 #define CSWSTATUS_PHASE 0x2 271 } __packed umass_bbb_csw_t; 272 273 #define UMASS_BBB_CSW_SIZE 13 274 275 /* CBI features */ 276 277 #define UR_CBI_ADSC 0x00 278 279 typedef union { 280 struct { 281 uint8_t type; 282 #define IDB_TYPE_CCI 0x00 283 uint8_t value; 284 #define IDB_VALUE_PASS 0x00 285 #define IDB_VALUE_FAIL 0x01 286 #define IDB_VALUE_PHASE 0x02 287 #define IDB_VALUE_PERSISTENT 0x03 288 #define IDB_VALUE_STATUS_MASK 0x03 289 } __packed common; 290 291 struct { 292 uint8_t asc; 293 uint8_t ascq; 294 } __packed ufi; 295 } __packed umass_cbi_sbl_t; 296 297 struct umass_softc; /* see below */ 298 299 typedef void (umass_callback_t)(struct umass_softc *sc, union ccb *ccb, 300 uint32_t residue, uint8_t status); 301 302 #define STATUS_CMD_OK 0 /* everything ok */ 303 #define STATUS_CMD_UNKNOWN 1 /* will have to fetch sense */ 304 #define STATUS_CMD_FAILED 2 /* transfer was ok, command failed */ 305 #define STATUS_WIRE_FAILED 3 /* couldn't even get command across */ 306 307 typedef uint8_t (umass_transform_t)(struct umass_softc *sc, uint8_t *cmd_ptr, 308 uint8_t cmd_len); 309 310 /* Wire and command protocol */ 311 #define UMASS_PROTO_BBB 0x0001 /* USB wire protocol */ 312 #define UMASS_PROTO_CBI 0x0002 313 #define UMASS_PROTO_CBI_I 0x0004 314 #define UMASS_PROTO_WIRE 0x00ff /* USB wire protocol mask */ 315 #define UMASS_PROTO_SCSI 0x0100 /* command protocol */ 316 #define UMASS_PROTO_ATAPI 0x0200 317 #define UMASS_PROTO_UFI 0x0400 318 #define UMASS_PROTO_RBC 0x0800 319 #define UMASS_PROTO_COMMAND 0xff00 /* command protocol mask */ 320 321 /* Device specific quirks */ 322 #define NO_QUIRKS 0x0000 323 /* 324 * The drive does not support Test Unit Ready. Convert to Start Unit 325 */ 326 #define NO_TEST_UNIT_READY 0x0001 327 /* 328 * The drive does not reset the Unit Attention state after REQUEST 329 * SENSE has been sent. The INQUIRY command does not reset the UA 330 * either, and so CAM runs in circles trying to retrieve the initial 331 * INQUIRY data. 332 */ 333 #define RS_NO_CLEAR_UA 0x0002 334 /* The drive does not support START STOP. */ 335 #define NO_START_STOP 0x0004 336 /* Don't ask for full inquiry data (255b). */ 337 #define FORCE_SHORT_INQUIRY 0x0008 338 /* Needs to be initialised the Shuttle way */ 339 #define SHUTTLE_INIT 0x0010 340 /* Drive needs to be switched to alternate iface 1 */ 341 #define ALT_IFACE_1 0x0020 342 /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */ 343 #define FLOPPY_SPEED 0x0040 344 /* The device can't count and gets the residue of transfers wrong */ 345 #define IGNORE_RESIDUE 0x0080 346 /* No GetMaxLun call */ 347 #define NO_GETMAXLUN 0x0100 348 /* The device uses a weird CSWSIGNATURE. */ 349 #define WRONG_CSWSIG 0x0200 350 /* Device cannot handle INQUIRY so fake a generic response */ 351 #define NO_INQUIRY 0x0400 352 /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */ 353 #define NO_INQUIRY_EVPD 0x0800 354 /* Pad all RBC requests to 12 bytes. */ 355 #define RBC_PAD_TO_12 0x1000 356 /* 357 * Device reports number of sectors from READ_CAPACITY, not max 358 * sector number. 359 */ 360 #define READ_CAPACITY_OFFBY1 0x2000 361 /* 362 * Device cannot handle a SCSI synchronize cache command. Normally 363 * this quirk would be handled in the cam layer, but for IDE bridges 364 * we need to associate the quirk with the bridge and not the 365 * underlying disk device. This is handled by faking a success 366 * result. 367 */ 368 #define NO_SYNCHRONIZE_CACHE 0x4000 369 /* Device does not support 'PREVENT/ALLOW MEDIUM REMOVAL'. */ 370 #define NO_PREVENT_ALLOW 0x8000 371 372 struct umass_softc { 373 struct scsi_sense cam_scsi_sense; 374 struct scsi_test_unit_ready cam_scsi_test_unit_ready; 375 struct mtx sc_mtx; 376 struct { 377 uint8_t *data_ptr; 378 union ccb *ccb; 379 umass_callback_t *callback; 380 381 uint32_t data_len; /* bytes */ 382 uint32_t data_rem; /* bytes */ 383 uint32_t data_timeout; /* ms */ 384 uint32_t actlen; /* bytes */ 385 386 uint8_t cmd_data[UMASS_MAX_CMDLEN]; 387 uint8_t cmd_len; /* bytes */ 388 uint8_t dir; 389 uint8_t lun; 390 } sc_transfer; 391 392 /* Bulk specific variables for transfers in progress */ 393 umass_bbb_cbw_t cbw; /* command block wrapper */ 394 umass_bbb_csw_t csw; /* command status wrapper */ 395 396 /* CBI specific variables for transfers in progress */ 397 umass_cbi_sbl_t sbl; /* status block */ 398 399 device_t sc_dev; 400 struct usb_device *sc_udev; 401 struct cam_sim *sc_sim; /* SCSI Interface Module */ 402 struct usb_xfer *sc_xfer[UMASS_T_MAX]; 403 404 /* 405 * The command transform function is used to convert the SCSI 406 * commands into their derivatives, like UFI, ATAPI, and friends. 407 */ 408 umass_transform_t *sc_transform; 409 410 uint32_t sc_unit; 411 uint32_t sc_quirks; /* they got it almost right */ 412 uint32_t sc_proto; /* wire and cmd protocol */ 413 414 uint8_t sc_name[16]; 415 uint8_t sc_iface_no; /* interface number */ 416 uint8_t sc_maxlun; /* maximum LUN number, inclusive */ 417 uint8_t sc_last_xfer_index; 418 uint8_t sc_status_try; 419 }; 420 421 struct umass_probe_proto { 422 uint32_t quirks; 423 uint32_t proto; 424 425 int error; 426 }; 427 428 /* prototypes */ 429 430 static device_probe_t umass_probe; 431 static device_attach_t umass_attach; 432 static device_detach_t umass_detach; 433 434 static usb_callback_t umass_tr_error; 435 static usb_callback_t umass_t_bbb_reset1_callback; 436 static usb_callback_t umass_t_bbb_reset2_callback; 437 static usb_callback_t umass_t_bbb_reset3_callback; 438 static usb_callback_t umass_t_bbb_command_callback; 439 static usb_callback_t umass_t_bbb_data_read_callback; 440 static usb_callback_t umass_t_bbb_data_rd_cs_callback; 441 static usb_callback_t umass_t_bbb_data_write_callback; 442 static usb_callback_t umass_t_bbb_data_wr_cs_callback; 443 static usb_callback_t umass_t_bbb_status_callback; 444 static usb_callback_t umass_t_cbi_reset1_callback; 445 static usb_callback_t umass_t_cbi_reset2_callback; 446 static usb_callback_t umass_t_cbi_reset3_callback; 447 static usb_callback_t umass_t_cbi_reset4_callback; 448 static usb_callback_t umass_t_cbi_command_callback; 449 static usb_callback_t umass_t_cbi_data_read_callback; 450 static usb_callback_t umass_t_cbi_data_rd_cs_callback; 451 static usb_callback_t umass_t_cbi_data_write_callback; 452 static usb_callback_t umass_t_cbi_data_wr_cs_callback; 453 static usb_callback_t umass_t_cbi_status_callback; 454 455 static void umass_cancel_ccb(struct umass_softc *); 456 static void umass_init_shuttle(struct umass_softc *); 457 static void umass_reset(struct umass_softc *); 458 static void umass_t_bbb_data_clear_stall_callback(struct usb_xfer *, 459 uint8_t, uint8_t, usb_error_t); 460 static void umass_command_start(struct umass_softc *, uint8_t, void *, 461 uint32_t, uint32_t, umass_callback_t *, union ccb *); 462 static uint8_t umass_bbb_get_max_lun(struct umass_softc *); 463 static void umass_cbi_start_status(struct umass_softc *); 464 static void umass_t_cbi_data_clear_stall_callback(struct usb_xfer *, 465 uint8_t, uint8_t, usb_error_t); 466 static int umass_cam_attach_sim(struct umass_softc *); 467 static void umass_cam_attach(struct umass_softc *); 468 static void umass_cam_detach_sim(struct umass_softc *); 469 static void umass_cam_action(struct cam_sim *, union ccb *); 470 static void umass_cam_poll(struct cam_sim *); 471 static void umass_cam_cb(struct umass_softc *, union ccb *, uint32_t, 472 uint8_t); 473 static void umass_cam_sense_cb(struct umass_softc *, union ccb *, uint32_t, 474 uint8_t); 475 static void umass_cam_quirk_cb(struct umass_softc *, union ccb *, uint32_t, 476 uint8_t); 477 static uint8_t umass_scsi_transform(struct umass_softc *, uint8_t *, uint8_t); 478 static uint8_t umass_rbc_transform(struct umass_softc *, uint8_t *, uint8_t); 479 static uint8_t umass_ufi_transform(struct umass_softc *, uint8_t *, uint8_t); 480 static uint8_t umass_atapi_transform(struct umass_softc *, uint8_t *, 481 uint8_t); 482 static uint8_t umass_no_transform(struct umass_softc *, uint8_t *, uint8_t); 483 static uint8_t umass_std_transform(struct umass_softc *, union ccb *, uint8_t 484 *, uint8_t); 485 486 #ifdef USB_DEBUG 487 static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 488 static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 489 static void umass_cbi_dump_cmd(struct umass_softc *, void *, uint8_t); 490 static void umass_dump_buffer(struct umass_softc *, uint8_t *, uint32_t, 491 uint32_t); 492 #endif 493 494 static struct usb_config umass_bbb_config[UMASS_T_BBB_MAX] = { 495 [UMASS_T_BBB_RESET1] = { 496 .type = UE_CONTROL, 497 .endpoint = 0x00, /* Control pipe */ 498 .direction = UE_DIR_ANY, 499 .bufsize = sizeof(struct usb_device_request), 500 .callback = &umass_t_bbb_reset1_callback, 501 .timeout = 5000, /* 5 seconds */ 502 .interval = 500, /* 500 milliseconds */ 503 }, 504 505 [UMASS_T_BBB_RESET2] = { 506 .type = UE_CONTROL, 507 .endpoint = 0x00, /* Control pipe */ 508 .direction = UE_DIR_ANY, 509 .bufsize = sizeof(struct usb_device_request), 510 .callback = &umass_t_bbb_reset2_callback, 511 .timeout = 5000, /* 5 seconds */ 512 .interval = 50, /* 50 milliseconds */ 513 }, 514 515 [UMASS_T_BBB_RESET3] = { 516 .type = UE_CONTROL, 517 .endpoint = 0x00, /* Control pipe */ 518 .direction = UE_DIR_ANY, 519 .bufsize = sizeof(struct usb_device_request), 520 .callback = &umass_t_bbb_reset3_callback, 521 .timeout = 5000, /* 5 seconds */ 522 .interval = 50, /* 50 milliseconds */ 523 }, 524 525 [UMASS_T_BBB_COMMAND] = { 526 .type = UE_BULK, 527 .endpoint = UE_ADDR_ANY, 528 .direction = UE_DIR_OUT, 529 .bufsize = sizeof(umass_bbb_cbw_t), 530 .callback = &umass_t_bbb_command_callback, 531 .timeout = 5000, /* 5 seconds */ 532 }, 533 534 [UMASS_T_BBB_DATA_READ] = { 535 .type = UE_BULK, 536 .endpoint = UE_ADDR_ANY, 537 .direction = UE_DIR_IN, 538 .bufsize = UMASS_BULK_SIZE, 539 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 540 .callback = &umass_t_bbb_data_read_callback, 541 .timeout = 0, /* overwritten later */ 542 }, 543 544 [UMASS_T_BBB_DATA_RD_CS] = { 545 .type = UE_CONTROL, 546 .endpoint = 0x00, /* Control pipe */ 547 .direction = UE_DIR_ANY, 548 .bufsize = sizeof(struct usb_device_request), 549 .callback = &umass_t_bbb_data_rd_cs_callback, 550 .timeout = 5000, /* 5 seconds */ 551 }, 552 553 [UMASS_T_BBB_DATA_WRITE] = { 554 .type = UE_BULK, 555 .endpoint = UE_ADDR_ANY, 556 .direction = UE_DIR_OUT, 557 .bufsize = UMASS_BULK_SIZE, 558 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 559 .callback = &umass_t_bbb_data_write_callback, 560 .timeout = 0, /* overwritten later */ 561 }, 562 563 [UMASS_T_BBB_DATA_WR_CS] = { 564 .type = UE_CONTROL, 565 .endpoint = 0x00, /* Control pipe */ 566 .direction = UE_DIR_ANY, 567 .bufsize = sizeof(struct usb_device_request), 568 .callback = &umass_t_bbb_data_wr_cs_callback, 569 .timeout = 5000, /* 5 seconds */ 570 }, 571 572 [UMASS_T_BBB_STATUS] = { 573 .type = UE_BULK, 574 .endpoint = UE_ADDR_ANY, 575 .direction = UE_DIR_IN, 576 .bufsize = sizeof(umass_bbb_csw_t), 577 .flags = {.short_xfer_ok = 1,}, 578 .callback = &umass_t_bbb_status_callback, 579 .timeout = 5000, /* ms */ 580 }, 581 }; 582 583 static struct usb_config umass_cbi_config[UMASS_T_CBI_MAX] = { 584 [UMASS_T_CBI_RESET1] = { 585 .type = UE_CONTROL, 586 .endpoint = 0x00, /* Control pipe */ 587 .direction = UE_DIR_ANY, 588 .bufsize = (sizeof(struct usb_device_request) + 589 UMASS_CBI_DIAGNOSTIC_CMDLEN), 590 .callback = &umass_t_cbi_reset1_callback, 591 .timeout = 5000, /* 5 seconds */ 592 .interval = 500, /* 500 milliseconds */ 593 }, 594 595 [UMASS_T_CBI_RESET2] = { 596 .type = UE_CONTROL, 597 .endpoint = 0x00, /* Control pipe */ 598 .direction = UE_DIR_ANY, 599 .bufsize = sizeof(struct usb_device_request), 600 .callback = &umass_t_cbi_reset2_callback, 601 .timeout = 5000, /* 5 seconds */ 602 .interval = 50, /* 50 milliseconds */ 603 }, 604 605 [UMASS_T_CBI_RESET3] = { 606 .type = UE_CONTROL, 607 .endpoint = 0x00, /* Control pipe */ 608 .direction = UE_DIR_ANY, 609 .bufsize = sizeof(struct usb_device_request), 610 .callback = &umass_t_cbi_reset3_callback, 611 .timeout = 5000, /* 5 seconds */ 612 .interval = 50, /* 50 milliseconds */ 613 }, 614 615 [UMASS_T_CBI_COMMAND] = { 616 .type = UE_CONTROL, 617 .endpoint = 0x00, /* Control pipe */ 618 .direction = UE_DIR_ANY, 619 .bufsize = (sizeof(struct usb_device_request) + 620 UMASS_MAX_CMDLEN), 621 .callback = &umass_t_cbi_command_callback, 622 .timeout = 5000, /* 5 seconds */ 623 }, 624 625 [UMASS_T_CBI_DATA_READ] = { 626 .type = UE_BULK, 627 .endpoint = UE_ADDR_ANY, 628 .direction = UE_DIR_IN, 629 .bufsize = UMASS_BULK_SIZE, 630 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 631 .callback = &umass_t_cbi_data_read_callback, 632 .timeout = 0, /* overwritten later */ 633 }, 634 635 [UMASS_T_CBI_DATA_RD_CS] = { 636 .type = UE_CONTROL, 637 .endpoint = 0x00, /* Control pipe */ 638 .direction = UE_DIR_ANY, 639 .bufsize = sizeof(struct usb_device_request), 640 .callback = &umass_t_cbi_data_rd_cs_callback, 641 .timeout = 5000, /* 5 seconds */ 642 }, 643 644 [UMASS_T_CBI_DATA_WRITE] = { 645 .type = UE_BULK, 646 .endpoint = UE_ADDR_ANY, 647 .direction = UE_DIR_OUT, 648 .bufsize = UMASS_BULK_SIZE, 649 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 650 .callback = &umass_t_cbi_data_write_callback, 651 .timeout = 0, /* overwritten later */ 652 }, 653 654 [UMASS_T_CBI_DATA_WR_CS] = { 655 .type = UE_CONTROL, 656 .endpoint = 0x00, /* Control pipe */ 657 .direction = UE_DIR_ANY, 658 .bufsize = sizeof(struct usb_device_request), 659 .callback = &umass_t_cbi_data_wr_cs_callback, 660 .timeout = 5000, /* 5 seconds */ 661 }, 662 663 [UMASS_T_CBI_STATUS] = { 664 .type = UE_INTERRUPT, 665 .endpoint = UE_ADDR_ANY, 666 .direction = UE_DIR_IN, 667 .flags = {.short_xfer_ok = 1,.no_pipe_ok = 1,}, 668 .bufsize = sizeof(umass_cbi_sbl_t), 669 .callback = &umass_t_cbi_status_callback, 670 .timeout = 5000, /* ms */ 671 }, 672 673 [UMASS_T_CBI_RESET4] = { 674 .type = UE_CONTROL, 675 .endpoint = 0x00, /* Control pipe */ 676 .direction = UE_DIR_ANY, 677 .bufsize = sizeof(struct usb_device_request), 678 .callback = &umass_t_cbi_reset4_callback, 679 .timeout = 5000, /* ms */ 680 }, 681 }; 682 683 /* If device cannot return valid inquiry data, fake it */ 684 static const uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = { 685 0, /* removable */ 0x80, SCSI_REV_2, SCSI_REV_2, 686 /* additional_length */ 31, 0, 0, 0 687 }; 688 689 #define UFI_COMMAND_LENGTH 12 /* UFI commands are always 12 bytes */ 690 #define ATAPI_COMMAND_LENGTH 12 /* ATAPI commands are always 12 bytes */ 691 692 static devclass_t umass_devclass; 693 694 static device_method_t umass_methods[] = { 695 /* Device interface */ 696 DEVMETHOD(device_probe, umass_probe), 697 DEVMETHOD(device_attach, umass_attach), 698 DEVMETHOD(device_detach, umass_detach), 699 700 DEVMETHOD_END 701 }; 702 703 static driver_t umass_driver = { 704 .name = "umass", 705 .methods = umass_methods, 706 .size = sizeof(struct umass_softc), 707 }; 708 709 static const STRUCT_USB_HOST_ID __used umass_devs[] = { 710 /* generic mass storage class */ 711 {USB_IFACE_CLASS(UICLASS_MASS),}, 712 }; 713 714 DRIVER_MODULE(umass, uhub, umass_driver, umass_devclass, NULL, 0); 715 MODULE_DEPEND(umass, usb, 1, 1, 1); 716 MODULE_DEPEND(umass, cam, 1, 1, 1); 717 MODULE_VERSION(umass, 1); 718 USB_PNP_HOST_INFO(umass_devs); 719 720 /* 721 * USB device probe/attach/detach 722 */ 723 724 static uint16_t 725 umass_get_proto(struct usb_interface *iface) 726 { 727 struct usb_interface_descriptor *id; 728 uint16_t retval; 729 730 retval = 0; 731 732 /* Check for a standards compliant device */ 733 id = usbd_get_interface_descriptor(iface); 734 if ((id == NULL) || 735 (id->bInterfaceClass != UICLASS_MASS)) { 736 goto done; 737 } 738 switch (id->bInterfaceSubClass) { 739 case UISUBCLASS_SCSI: 740 retval |= UMASS_PROTO_SCSI; 741 break; 742 case UISUBCLASS_UFI: 743 retval |= UMASS_PROTO_UFI; 744 break; 745 case UISUBCLASS_RBC: 746 retval |= UMASS_PROTO_RBC; 747 break; 748 case UISUBCLASS_SFF8020I: 749 case UISUBCLASS_SFF8070I: 750 retval |= UMASS_PROTO_ATAPI; 751 break; 752 default: 753 goto done; 754 } 755 756 switch (id->bInterfaceProtocol) { 757 case UIPROTO_MASS_CBI: 758 retval |= UMASS_PROTO_CBI; 759 break; 760 case UIPROTO_MASS_CBI_I: 761 retval |= UMASS_PROTO_CBI_I; 762 break; 763 case UIPROTO_MASS_BBB_OLD: 764 case UIPROTO_MASS_BBB: 765 retval |= UMASS_PROTO_BBB; 766 break; 767 default: 768 goto done; 769 } 770 done: 771 return (retval); 772 } 773 774 /* 775 * Match the device we are seeing with the devices supported. 776 */ 777 static struct umass_probe_proto 778 umass_probe_proto(device_t dev, struct usb_attach_arg *uaa) 779 { 780 struct umass_probe_proto ret; 781 uint32_t quirks = NO_QUIRKS; 782 uint32_t proto = umass_get_proto(uaa->iface); 783 784 memset(&ret, 0, sizeof(ret)); 785 ret.error = BUS_PROBE_GENERIC; 786 787 /* Check if we should deny probing. */ 788 if (usb_test_quirk(uaa, UQ_MSC_IGNORE)) { 789 ret.error = ENXIO; 790 goto done; 791 } 792 793 /* Search for protocol enforcement */ 794 795 if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_BBB)) { 796 proto &= ~UMASS_PROTO_WIRE; 797 proto |= UMASS_PROTO_BBB; 798 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI)) { 799 proto &= ~UMASS_PROTO_WIRE; 800 proto |= UMASS_PROTO_CBI; 801 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI_I)) { 802 proto &= ~UMASS_PROTO_WIRE; 803 proto |= UMASS_PROTO_CBI_I; 804 } 805 806 if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_SCSI)) { 807 proto &= ~UMASS_PROTO_COMMAND; 808 proto |= UMASS_PROTO_SCSI; 809 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_ATAPI)) { 810 proto &= ~UMASS_PROTO_COMMAND; 811 proto |= UMASS_PROTO_ATAPI; 812 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_UFI)) { 813 proto &= ~UMASS_PROTO_COMMAND; 814 proto |= UMASS_PROTO_UFI; 815 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_RBC)) { 816 proto &= ~UMASS_PROTO_COMMAND; 817 proto |= UMASS_PROTO_RBC; 818 } 819 820 /* Check if the protocol is invalid */ 821 822 if ((proto & UMASS_PROTO_COMMAND) == 0) { 823 ret.error = ENXIO; 824 goto done; 825 } 826 827 if ((proto & UMASS_PROTO_WIRE) == 0) { 828 ret.error = ENXIO; 829 goto done; 830 } 831 832 /* Search for quirks */ 833 834 if (usb_test_quirk(uaa, UQ_MSC_NO_TEST_UNIT_READY)) 835 quirks |= NO_TEST_UNIT_READY; 836 if (usb_test_quirk(uaa, UQ_MSC_NO_RS_CLEAR_UA)) 837 quirks |= RS_NO_CLEAR_UA; 838 if (usb_test_quirk(uaa, UQ_MSC_NO_START_STOP)) 839 quirks |= NO_START_STOP; 840 if (usb_test_quirk(uaa, UQ_MSC_NO_GETMAXLUN)) 841 quirks |= NO_GETMAXLUN; 842 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY)) 843 quirks |= NO_INQUIRY; 844 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY_EVPD)) 845 quirks |= NO_INQUIRY_EVPD; 846 if (usb_test_quirk(uaa, UQ_MSC_NO_PREVENT_ALLOW)) 847 quirks |= NO_PREVENT_ALLOW; 848 if (usb_test_quirk(uaa, UQ_MSC_NO_SYNC_CACHE)) 849 quirks |= NO_SYNCHRONIZE_CACHE; 850 if (usb_test_quirk(uaa, UQ_MSC_SHUTTLE_INIT)) 851 quirks |= SHUTTLE_INIT; 852 if (usb_test_quirk(uaa, UQ_MSC_ALT_IFACE_1)) 853 quirks |= ALT_IFACE_1; 854 if (usb_test_quirk(uaa, UQ_MSC_FLOPPY_SPEED)) 855 quirks |= FLOPPY_SPEED; 856 if (usb_test_quirk(uaa, UQ_MSC_IGNORE_RESIDUE)) 857 quirks |= IGNORE_RESIDUE; 858 if (usb_test_quirk(uaa, UQ_MSC_WRONG_CSWSIG)) 859 quirks |= WRONG_CSWSIG; 860 if (usb_test_quirk(uaa, UQ_MSC_RBC_PAD_TO_12)) 861 quirks |= RBC_PAD_TO_12; 862 if (usb_test_quirk(uaa, UQ_MSC_READ_CAP_OFFBY1)) 863 quirks |= READ_CAPACITY_OFFBY1; 864 if (usb_test_quirk(uaa, UQ_MSC_FORCE_SHORT_INQ)) 865 quirks |= FORCE_SHORT_INQUIRY; 866 867 done: 868 ret.quirks = quirks; 869 ret.proto = proto; 870 return (ret); 871 } 872 873 static int 874 umass_probe(device_t dev) 875 { 876 struct usb_attach_arg *uaa = device_get_ivars(dev); 877 struct umass_probe_proto temp; 878 879 if (uaa->usb_mode != USB_MODE_HOST) { 880 return (ENXIO); 881 } 882 temp = umass_probe_proto(dev, uaa); 883 884 return (temp.error); 885 } 886 887 static int 888 umass_attach(device_t dev) 889 { 890 struct umass_softc *sc = device_get_softc(dev); 891 struct usb_attach_arg *uaa = device_get_ivars(dev); 892 struct umass_probe_proto temp = umass_probe_proto(dev, uaa); 893 struct usb_interface_descriptor *id; 894 int err; 895 896 /* 897 * NOTE: the softc struct is cleared in device_set_driver. 898 * We can safely call umass_detach without specifically 899 * initializing the struct. 900 */ 901 902 sc->sc_dev = dev; 903 sc->sc_udev = uaa->device; 904 sc->sc_proto = temp.proto; 905 sc->sc_quirks = temp.quirks; 906 sc->sc_unit = device_get_unit(dev); 907 908 snprintf(sc->sc_name, sizeof(sc->sc_name), 909 "%s", device_get_nameunit(dev)); 910 911 device_set_usb_desc(dev); 912 913 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), 914 NULL, MTX_DEF | MTX_RECURSE); 915 916 /* get interface index */ 917 918 id = usbd_get_interface_descriptor(uaa->iface); 919 if (id == NULL) { 920 device_printf(dev, "failed to get " 921 "interface number\n"); 922 goto detach; 923 } 924 sc->sc_iface_no = id->bInterfaceNumber; 925 926 #ifdef USB_DEBUG 927 device_printf(dev, " "); 928 929 switch (sc->sc_proto & UMASS_PROTO_COMMAND) { 930 case UMASS_PROTO_SCSI: 931 printf("SCSI"); 932 break; 933 case UMASS_PROTO_ATAPI: 934 printf("8070i (ATAPI)"); 935 break; 936 case UMASS_PROTO_UFI: 937 printf("UFI"); 938 break; 939 case UMASS_PROTO_RBC: 940 printf("RBC"); 941 break; 942 default: 943 printf("(unknown 0x%02x)", 944 sc->sc_proto & UMASS_PROTO_COMMAND); 945 break; 946 } 947 948 printf(" over "); 949 950 switch (sc->sc_proto & UMASS_PROTO_WIRE) { 951 case UMASS_PROTO_BBB: 952 printf("Bulk-Only"); 953 break; 954 case UMASS_PROTO_CBI: /* uses Comand/Bulk pipes */ 955 printf("CBI"); 956 break; 957 case UMASS_PROTO_CBI_I: /* uses Comand/Bulk/Interrupt pipes */ 958 printf("CBI with CCI"); 959 break; 960 default: 961 printf("(unknown 0x%02x)", 962 sc->sc_proto & UMASS_PROTO_WIRE); 963 } 964 965 printf("; quirks = 0x%04x\n", sc->sc_quirks); 966 #endif 967 968 if (sc->sc_quirks & ALT_IFACE_1) { 969 err = usbd_set_alt_interface_index 970 (uaa->device, uaa->info.bIfaceIndex, 1); 971 972 if (err) { 973 DPRINTF(sc, UDMASS_USB, "could not switch to " 974 "Alt Interface 1\n"); 975 goto detach; 976 } 977 } 978 /* allocate all required USB transfers */ 979 980 if (sc->sc_proto & UMASS_PROTO_BBB) { 981 err = usbd_transfer_setup(uaa->device, 982 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_bbb_config, 983 UMASS_T_BBB_MAX, sc, &sc->sc_mtx); 984 985 /* skip reset first time */ 986 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 987 988 } else if (sc->sc_proto & (UMASS_PROTO_CBI | UMASS_PROTO_CBI_I)) { 989 err = usbd_transfer_setup(uaa->device, 990 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_cbi_config, 991 UMASS_T_CBI_MAX, sc, &sc->sc_mtx); 992 993 /* skip reset first time */ 994 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 995 996 } else { 997 err = USB_ERR_INVAL; 998 } 999 1000 if (err) { 1001 device_printf(dev, "could not setup required " 1002 "transfers, %s\n", usbd_errstr(err)); 1003 goto detach; 1004 } 1005 #ifdef USB_DEBUG 1006 if (umass_throttle > 0) { 1007 uint8_t x; 1008 int iv; 1009 1010 iv = umass_throttle; 1011 1012 if (iv < 1) 1013 iv = 1; 1014 else if (iv > 8000) 1015 iv = 8000; 1016 1017 for (x = 0; x != UMASS_T_MAX; x++) { 1018 if (sc->sc_xfer[x] != NULL) 1019 usbd_xfer_set_interval(sc->sc_xfer[x], iv); 1020 } 1021 } 1022 #endif 1023 sc->sc_transform = 1024 (sc->sc_proto & UMASS_PROTO_SCSI) ? &umass_scsi_transform : 1025 (sc->sc_proto & UMASS_PROTO_UFI) ? &umass_ufi_transform : 1026 (sc->sc_proto & UMASS_PROTO_ATAPI) ? &umass_atapi_transform : 1027 (sc->sc_proto & UMASS_PROTO_RBC) ? &umass_rbc_transform : 1028 &umass_no_transform; 1029 1030 /* from here onwards the device can be used. */ 1031 1032 if (sc->sc_quirks & SHUTTLE_INIT) { 1033 umass_init_shuttle(sc); 1034 } 1035 /* get the maximum LUN supported by the device */ 1036 1037 if (((sc->sc_proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB) && 1038 !(sc->sc_quirks & NO_GETMAXLUN)) 1039 sc->sc_maxlun = umass_bbb_get_max_lun(sc); 1040 else 1041 sc->sc_maxlun = 0; 1042 1043 /* Prepare the SCSI command block */ 1044 sc->cam_scsi_sense.opcode = REQUEST_SENSE; 1045 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY; 1046 1047 /* register the SIM */ 1048 err = umass_cam_attach_sim(sc); 1049 if (err) { 1050 goto detach; 1051 } 1052 /* scan the SIM */ 1053 umass_cam_attach(sc); 1054 1055 DPRINTF(sc, UDMASS_GEN, "Attach finished\n"); 1056 1057 return (0); /* success */ 1058 1059 detach: 1060 umass_detach(dev); 1061 return (ENXIO); /* failure */ 1062 } 1063 1064 static int 1065 umass_detach(device_t dev) 1066 { 1067 struct umass_softc *sc = device_get_softc(dev); 1068 1069 DPRINTF(sc, UDMASS_USB, "\n"); 1070 1071 /* teardown our statemachine */ 1072 1073 usbd_transfer_unsetup(sc->sc_xfer, UMASS_T_MAX); 1074 1075 mtx_lock(&sc->sc_mtx); 1076 1077 /* cancel any leftover CCB's */ 1078 1079 umass_cancel_ccb(sc); 1080 1081 umass_cam_detach_sim(sc); 1082 1083 mtx_unlock(&sc->sc_mtx); 1084 1085 mtx_destroy(&sc->sc_mtx); 1086 1087 return (0); /* success */ 1088 } 1089 1090 static void 1091 umass_init_shuttle(struct umass_softc *sc) 1092 { 1093 struct usb_device_request req; 1094 uint8_t status[2] = {0, 0}; 1095 1096 /* 1097 * The Linux driver does this, but no one can tell us what the 1098 * command does. 1099 */ 1100 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1101 req.bRequest = 1; /* XXX unknown command */ 1102 USETW(req.wValue, 0); 1103 req.wIndex[0] = sc->sc_iface_no; 1104 req.wIndex[1] = 0; 1105 USETW(req.wLength, sizeof(status)); 1106 usbd_do_request(sc->sc_udev, NULL, &req, &status); 1107 1108 DPRINTF(sc, UDMASS_GEN, "Shuttle init returned 0x%02x%02x\n", 1109 status[0], status[1]); 1110 } 1111 1112 /* 1113 * Generic functions to handle transfers 1114 */ 1115 1116 static void 1117 umass_transfer_start(struct umass_softc *sc, uint8_t xfer_index) 1118 { 1119 DPRINTF(sc, UDMASS_GEN, "transfer index = " 1120 "%d\n", xfer_index); 1121 1122 if (sc->sc_xfer[xfer_index]) { 1123 sc->sc_last_xfer_index = xfer_index; 1124 usbd_transfer_start(sc->sc_xfer[xfer_index]); 1125 } else { 1126 umass_cancel_ccb(sc); 1127 } 1128 } 1129 1130 static void 1131 umass_reset(struct umass_softc *sc) 1132 { 1133 DPRINTF(sc, UDMASS_GEN, "resetting device\n"); 1134 1135 /* 1136 * stop the last transfer, if not already stopped: 1137 */ 1138 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 1139 umass_transfer_start(sc, 0); 1140 } 1141 1142 static void 1143 umass_cancel_ccb(struct umass_softc *sc) 1144 { 1145 union ccb *ccb; 1146 1147 USB_MTX_ASSERT(&sc->sc_mtx, MA_OWNED); 1148 1149 ccb = sc->sc_transfer.ccb; 1150 sc->sc_transfer.ccb = NULL; 1151 sc->sc_last_xfer_index = 0; 1152 1153 if (ccb) { 1154 (sc->sc_transfer.callback) 1155 (sc, ccb, (sc->sc_transfer.data_len - 1156 sc->sc_transfer.actlen), STATUS_WIRE_FAILED); 1157 } 1158 } 1159 1160 static void 1161 umass_tr_error(struct usb_xfer *xfer, usb_error_t error) 1162 { 1163 struct umass_softc *sc = usbd_xfer_softc(xfer); 1164 1165 if (error != USB_ERR_CANCELLED) { 1166 DPRINTF(sc, UDMASS_GEN, "transfer error, %s -> " 1167 "reset\n", usbd_errstr(error)); 1168 } 1169 umass_cancel_ccb(sc); 1170 } 1171 1172 /* 1173 * BBB protocol specific functions 1174 */ 1175 1176 static void 1177 umass_t_bbb_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1178 { 1179 struct umass_softc *sc = usbd_xfer_softc(xfer); 1180 struct usb_device_request req; 1181 struct usb_page_cache *pc; 1182 1183 switch (USB_GET_STATE(xfer)) { 1184 case USB_ST_TRANSFERRED: 1185 umass_transfer_start(sc, UMASS_T_BBB_RESET2); 1186 return; 1187 1188 case USB_ST_SETUP: 1189 /* 1190 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1191 * 1192 * For Reset Recovery the host shall issue in the following order: 1193 * a) a Bulk-Only Mass Storage Reset 1194 * b) a Clear Feature HALT to the Bulk-In endpoint 1195 * c) a Clear Feature HALT to the Bulk-Out endpoint 1196 * 1197 * This is done in 3 steps, using 3 transfers: 1198 * UMASS_T_BBB_RESET1 1199 * UMASS_T_BBB_RESET2 1200 * UMASS_T_BBB_RESET3 1201 */ 1202 1203 DPRINTF(sc, UDMASS_BBB, "BBB reset!\n"); 1204 1205 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1206 req.bRequest = UR_BBB_RESET; /* bulk only reset */ 1207 USETW(req.wValue, 0); 1208 req.wIndex[0] = sc->sc_iface_no; 1209 req.wIndex[1] = 0; 1210 USETW(req.wLength, 0); 1211 1212 pc = usbd_xfer_get_frame(xfer, 0); 1213 usbd_copy_in(pc, 0, &req, sizeof(req)); 1214 1215 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1216 usbd_xfer_set_frames(xfer, 1); 1217 usbd_transfer_submit(xfer); 1218 return; 1219 1220 default: /* Error */ 1221 umass_tr_error(xfer, error); 1222 return; 1223 } 1224 } 1225 1226 static void 1227 umass_t_bbb_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1228 { 1229 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_RESET3, 1230 UMASS_T_BBB_DATA_READ, error); 1231 } 1232 1233 static void 1234 umass_t_bbb_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1235 { 1236 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_COMMAND, 1237 UMASS_T_BBB_DATA_WRITE, error); 1238 } 1239 1240 static void 1241 umass_t_bbb_data_clear_stall_callback(struct usb_xfer *xfer, 1242 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1243 { 1244 struct umass_softc *sc = usbd_xfer_softc(xfer); 1245 1246 switch (USB_GET_STATE(xfer)) { 1247 case USB_ST_TRANSFERRED: 1248 tr_transferred: 1249 umass_transfer_start(sc, next_xfer); 1250 return; 1251 1252 case USB_ST_SETUP: 1253 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1254 goto tr_transferred; 1255 } 1256 return; 1257 1258 default: /* Error */ 1259 umass_tr_error(xfer, error); 1260 return; 1261 } 1262 } 1263 1264 static void 1265 umass_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 1266 { 1267 struct umass_softc *sc = usbd_xfer_softc(xfer); 1268 union ccb *ccb = sc->sc_transfer.ccb; 1269 struct usb_page_cache *pc; 1270 uint32_t tag; 1271 1272 switch (USB_GET_STATE(xfer)) { 1273 case USB_ST_TRANSFERRED: 1274 umass_transfer_start 1275 (sc, ((sc->sc_transfer.dir == DIR_IN) ? UMASS_T_BBB_DATA_READ : 1276 (sc->sc_transfer.dir == DIR_OUT) ? UMASS_T_BBB_DATA_WRITE : 1277 UMASS_T_BBB_STATUS)); 1278 return; 1279 1280 case USB_ST_SETUP: 1281 1282 sc->sc_status_try = 0; 1283 1284 if (ccb) { 1285 /* 1286 * the initial value is not important, 1287 * as long as the values are unique: 1288 */ 1289 tag = UGETDW(sc->cbw.dCBWTag) + 1; 1290 1291 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1292 USETDW(sc->cbw.dCBWTag, tag); 1293 1294 /* 1295 * dCBWDataTransferLength: 1296 * This field indicates the number of bytes of data that the host 1297 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1298 * the Direction bit) during the execution of this command. If this 1299 * field is set to 0, the device will expect that no data will be 1300 * transferred IN or OUT during this command, regardless of the value 1301 * of the Direction bit defined in dCBWFlags. 1302 */ 1303 USETDW(sc->cbw.dCBWDataTransferLength, sc->sc_transfer.data_len); 1304 1305 /* 1306 * dCBWFlags: 1307 * The bits of the Flags field are defined as follows: 1308 * Bits 0-6 reserved 1309 * Bit 7 Direction - this bit shall be ignored if the 1310 * dCBWDataTransferLength field is zero. 1311 * 0 = data Out from host to device 1312 * 1 = data In from device to host 1313 */ 1314 sc->cbw.bCBWFlags = ((sc->sc_transfer.dir == DIR_IN) ? 1315 CBWFLAGS_IN : CBWFLAGS_OUT); 1316 sc->cbw.bCBWLUN = sc->sc_transfer.lun; 1317 1318 if (sc->sc_transfer.cmd_len > sizeof(sc->cbw.CBWCDB)) { 1319 sc->sc_transfer.cmd_len = sizeof(sc->cbw.CBWCDB); 1320 DPRINTF(sc, UDMASS_BBB, "Truncating long command!\n"); 1321 } 1322 sc->cbw.bCDBLength = sc->sc_transfer.cmd_len; 1323 1324 /* copy SCSI command data */ 1325 memcpy(sc->cbw.CBWCDB, sc->sc_transfer.cmd_data, 1326 sc->sc_transfer.cmd_len); 1327 1328 /* clear remaining command area */ 1329 memset(sc->cbw.CBWCDB + 1330 sc->sc_transfer.cmd_len, 0, 1331 sizeof(sc->cbw.CBWCDB) - 1332 sc->sc_transfer.cmd_len); 1333 1334 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1335 1336 pc = usbd_xfer_get_frame(xfer, 0); 1337 usbd_copy_in(pc, 0, &sc->cbw, sizeof(sc->cbw)); 1338 usbd_xfer_set_frame_len(xfer, 0, sizeof(sc->cbw)); 1339 1340 usbd_transfer_submit(xfer); 1341 } 1342 return; 1343 1344 default: /* Error */ 1345 umass_tr_error(xfer, error); 1346 return; 1347 } 1348 } 1349 1350 static void 1351 umass_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1352 { 1353 struct umass_softc *sc = usbd_xfer_softc(xfer); 1354 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1355 int actlen, sumlen; 1356 1357 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1358 1359 switch (USB_GET_STATE(xfer)) { 1360 case USB_ST_TRANSFERRED: 1361 sc->sc_transfer.data_rem -= actlen; 1362 sc->sc_transfer.data_ptr += actlen; 1363 sc->sc_transfer.actlen += actlen; 1364 1365 if (actlen < sumlen) { 1366 /* short transfer */ 1367 sc->sc_transfer.data_rem = 0; 1368 } 1369 case USB_ST_SETUP: 1370 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1371 max_bulk, sc->sc_transfer.data_rem); 1372 1373 if (sc->sc_transfer.data_rem == 0) { 1374 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1375 return; 1376 } 1377 if (max_bulk > sc->sc_transfer.data_rem) { 1378 max_bulk = sc->sc_transfer.data_rem; 1379 } 1380 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1381 1382 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1383 max_bulk); 1384 1385 usbd_transfer_submit(xfer); 1386 return; 1387 1388 default: /* Error */ 1389 if (error == USB_ERR_CANCELLED) { 1390 umass_tr_error(xfer, error); 1391 } else { 1392 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1393 } 1394 return; 1395 } 1396 } 1397 1398 static void 1399 umass_t_bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1400 { 1401 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1402 UMASS_T_BBB_DATA_READ, error); 1403 } 1404 1405 static void 1406 umass_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1407 { 1408 struct umass_softc *sc = usbd_xfer_softc(xfer); 1409 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1410 int actlen, sumlen; 1411 1412 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1413 1414 switch (USB_GET_STATE(xfer)) { 1415 case USB_ST_TRANSFERRED: 1416 sc->sc_transfer.data_rem -= actlen; 1417 sc->sc_transfer.data_ptr += actlen; 1418 sc->sc_transfer.actlen += actlen; 1419 1420 if (actlen < sumlen) { 1421 /* short transfer */ 1422 sc->sc_transfer.data_rem = 0; 1423 } 1424 case USB_ST_SETUP: 1425 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1426 max_bulk, sc->sc_transfer.data_rem); 1427 1428 if (sc->sc_transfer.data_rem == 0) { 1429 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1430 return; 1431 } 1432 if (max_bulk > sc->sc_transfer.data_rem) { 1433 max_bulk = sc->sc_transfer.data_rem; 1434 } 1435 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1436 1437 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1438 max_bulk); 1439 1440 usbd_transfer_submit(xfer); 1441 return; 1442 1443 default: /* Error */ 1444 if (error == USB_ERR_CANCELLED) { 1445 umass_tr_error(xfer, error); 1446 } else { 1447 umass_transfer_start(sc, UMASS_T_BBB_DATA_WR_CS); 1448 } 1449 return; 1450 } 1451 } 1452 1453 static void 1454 umass_t_bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1455 { 1456 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1457 UMASS_T_BBB_DATA_WRITE, error); 1458 } 1459 1460 static void 1461 umass_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 1462 { 1463 struct umass_softc *sc = usbd_xfer_softc(xfer); 1464 union ccb *ccb = sc->sc_transfer.ccb; 1465 struct usb_page_cache *pc; 1466 uint32_t residue; 1467 int actlen; 1468 1469 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1470 1471 switch (USB_GET_STATE(xfer)) { 1472 case USB_ST_TRANSFERRED: 1473 1474 /* 1475 * Do a full reset if there is something wrong with the CSW: 1476 */ 1477 sc->sc_status_try = 1; 1478 1479 /* Zero missing parts of the CSW: */ 1480 1481 if (actlen < (int)sizeof(sc->csw)) 1482 memset(&sc->csw, 0, sizeof(sc->csw)); 1483 1484 pc = usbd_xfer_get_frame(xfer, 0); 1485 usbd_copy_out(pc, 0, &sc->csw, actlen); 1486 1487 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1488 1489 residue = UGETDW(sc->csw.dCSWDataResidue); 1490 1491 if ((!residue) || (sc->sc_quirks & IGNORE_RESIDUE)) { 1492 residue = (sc->sc_transfer.data_len - 1493 sc->sc_transfer.actlen); 1494 } 1495 if (residue > sc->sc_transfer.data_len) { 1496 DPRINTF(sc, UDMASS_BBB, "truncating residue from %d " 1497 "to %d bytes\n", residue, sc->sc_transfer.data_len); 1498 residue = sc->sc_transfer.data_len; 1499 } 1500 /* translate weird command-status signatures: */ 1501 if (sc->sc_quirks & WRONG_CSWSIG) { 1502 uint32_t temp = UGETDW(sc->csw.dCSWSignature); 1503 1504 if ((temp == CSWSIGNATURE_OLYMPUS_C1) || 1505 (temp == CSWSIGNATURE_IMAGINATION_DBX1)) { 1506 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1507 } 1508 } 1509 /* check CSW and handle eventual error */ 1510 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1511 DPRINTF(sc, UDMASS_BBB, "bad CSW signature 0x%08x != 0x%08x\n", 1512 UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); 1513 /* 1514 * Invalid CSW: Wrong signature or wrong tag might 1515 * indicate that we lost synchronization. Reset the 1516 * device. 1517 */ 1518 goto tr_error; 1519 } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { 1520 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: tag 0x%08x should be " 1521 "0x%08x\n", UGETDW(sc->csw.dCSWTag), 1522 UGETDW(sc->cbw.dCBWTag)); 1523 goto tr_error; 1524 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1525 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: status %d > %d\n", 1526 sc->csw.bCSWStatus, CSWSTATUS_PHASE); 1527 goto tr_error; 1528 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1529 DPRINTF(sc, UDMASS_BBB, "Phase error, residue = " 1530 "%d\n", residue); 1531 goto tr_error; 1532 } else if (sc->sc_transfer.actlen > sc->sc_transfer.data_len) { 1533 DPRINTF(sc, UDMASS_BBB, "Buffer overrun %d > %d\n", 1534 sc->sc_transfer.actlen, sc->sc_transfer.data_len); 1535 goto tr_error; 1536 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1537 DPRINTF(sc, UDMASS_BBB, "Command failed, residue = " 1538 "%d\n", residue); 1539 1540 sc->sc_transfer.ccb = NULL; 1541 1542 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1543 1544 (sc->sc_transfer.callback) 1545 (sc, ccb, residue, STATUS_CMD_FAILED); 1546 } else { 1547 sc->sc_transfer.ccb = NULL; 1548 1549 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1550 1551 (sc->sc_transfer.callback) 1552 (sc, ccb, residue, STATUS_CMD_OK); 1553 } 1554 return; 1555 1556 case USB_ST_SETUP: 1557 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 1558 usbd_transfer_submit(xfer); 1559 return; 1560 1561 default: 1562 tr_error: 1563 DPRINTF(sc, UDMASS_BBB, "Failed to read CSW: %s, try %d\n", 1564 usbd_errstr(error), sc->sc_status_try); 1565 1566 if ((error == USB_ERR_CANCELLED) || 1567 (sc->sc_status_try)) { 1568 umass_tr_error(xfer, error); 1569 } else { 1570 sc->sc_status_try = 1; 1571 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1572 } 1573 return; 1574 } 1575 } 1576 1577 static void 1578 umass_command_start(struct umass_softc *sc, uint8_t dir, 1579 void *data_ptr, uint32_t data_len, 1580 uint32_t data_timeout, umass_callback_t *callback, 1581 union ccb *ccb) 1582 { 1583 sc->sc_transfer.lun = ccb->ccb_h.target_lun; 1584 1585 /* 1586 * NOTE: assumes that "sc->sc_transfer.cmd_data" and 1587 * "sc->sc_transfer.cmd_len" has been properly 1588 * initialized. 1589 */ 1590 1591 sc->sc_transfer.dir = data_len ? dir : DIR_NONE; 1592 sc->sc_transfer.data_ptr = data_ptr; 1593 sc->sc_transfer.data_len = data_len; 1594 sc->sc_transfer.data_rem = data_len; 1595 sc->sc_transfer.data_timeout = (data_timeout + UMASS_TIMEOUT); 1596 1597 sc->sc_transfer.actlen = 0; 1598 sc->sc_transfer.callback = callback; 1599 sc->sc_transfer.ccb = ccb; 1600 1601 if (sc->sc_xfer[sc->sc_last_xfer_index]) { 1602 usbd_transfer_start(sc->sc_xfer[sc->sc_last_xfer_index]); 1603 } else { 1604 umass_cancel_ccb(sc); 1605 } 1606 } 1607 1608 static uint8_t 1609 umass_bbb_get_max_lun(struct umass_softc *sc) 1610 { 1611 struct usb_device_request req; 1612 usb_error_t err; 1613 uint8_t buf = 0; 1614 1615 /* The Get Max Lun command is a class-specific request. */ 1616 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1617 req.bRequest = UR_BBB_GET_MAX_LUN; 1618 USETW(req.wValue, 0); 1619 req.wIndex[0] = sc->sc_iface_no; 1620 req.wIndex[1] = 0; 1621 USETW(req.wLength, 1); 1622 1623 err = usbd_do_request(sc->sc_udev, NULL, &req, &buf); 1624 if (err) { 1625 buf = 0; 1626 1627 /* Device doesn't support Get Max Lun request. */ 1628 printf("%s: Get Max Lun not supported (%s)\n", 1629 sc->sc_name, usbd_errstr(err)); 1630 } 1631 return (buf); 1632 } 1633 1634 /* 1635 * Command/Bulk/Interrupt (CBI) specific functions 1636 */ 1637 1638 static void 1639 umass_cbi_start_status(struct umass_softc *sc) 1640 { 1641 if (sc->sc_xfer[UMASS_T_CBI_STATUS]) { 1642 umass_transfer_start(sc, UMASS_T_CBI_STATUS); 1643 } else { 1644 union ccb *ccb = sc->sc_transfer.ccb; 1645 1646 sc->sc_transfer.ccb = NULL; 1647 1648 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1649 1650 (sc->sc_transfer.callback) 1651 (sc, ccb, (sc->sc_transfer.data_len - 1652 sc->sc_transfer.actlen), STATUS_CMD_UNKNOWN); 1653 } 1654 } 1655 1656 static void 1657 umass_t_cbi_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1658 { 1659 struct umass_softc *sc = usbd_xfer_softc(xfer); 1660 struct usb_device_request req; 1661 struct usb_page_cache *pc; 1662 uint8_t buf[UMASS_CBI_DIAGNOSTIC_CMDLEN]; 1663 1664 uint8_t i; 1665 1666 switch (USB_GET_STATE(xfer)) { 1667 case USB_ST_TRANSFERRED: 1668 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1669 break; 1670 1671 case USB_ST_SETUP: 1672 /* 1673 * Command Block Reset Protocol 1674 * 1675 * First send a reset request to the device. Then clear 1676 * any possibly stalled bulk endpoints. 1677 * 1678 * This is done in 3 steps, using 3 transfers: 1679 * UMASS_T_CBI_RESET1 1680 * UMASS_T_CBI_RESET2 1681 * UMASS_T_CBI_RESET3 1682 * UMASS_T_CBI_RESET4 (only if there is an interrupt endpoint) 1683 */ 1684 1685 DPRINTF(sc, UDMASS_CBI, "CBI reset!\n"); 1686 1687 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1688 req.bRequest = UR_CBI_ADSC; 1689 USETW(req.wValue, 0); 1690 req.wIndex[0] = sc->sc_iface_no; 1691 req.wIndex[1] = 0; 1692 USETW(req.wLength, UMASS_CBI_DIAGNOSTIC_CMDLEN); 1693 1694 /* 1695 * The 0x1d code is the SEND DIAGNOSTIC command. To 1696 * distinguish between the two, the last 10 bytes of the CBL 1697 * is filled with 0xff (section 2.2 of the CBI 1698 * specification) 1699 */ 1700 buf[0] = 0x1d; /* Command Block Reset */ 1701 buf[1] = 0x04; 1702 1703 for (i = 2; i < UMASS_CBI_DIAGNOSTIC_CMDLEN; i++) { 1704 buf[i] = 0xff; 1705 } 1706 1707 pc = usbd_xfer_get_frame(xfer, 0); 1708 usbd_copy_in(pc, 0, &req, sizeof(req)); 1709 pc = usbd_xfer_get_frame(xfer, 1); 1710 usbd_copy_in(pc, 0, buf, sizeof(buf)); 1711 1712 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1713 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); 1714 usbd_xfer_set_frames(xfer, 2); 1715 usbd_transfer_submit(xfer); 1716 break; 1717 1718 default: /* Error */ 1719 if (error == USB_ERR_CANCELLED) 1720 umass_tr_error(xfer, error); 1721 else 1722 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1723 break; 1724 } 1725 } 1726 1727 static void 1728 umass_t_cbi_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1729 { 1730 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_RESET3, 1731 UMASS_T_CBI_DATA_READ, error); 1732 } 1733 1734 static void 1735 umass_t_cbi_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1736 { 1737 struct umass_softc *sc = usbd_xfer_softc(xfer); 1738 1739 umass_t_cbi_data_clear_stall_callback 1740 (xfer, (sc->sc_xfer[UMASS_T_CBI_RESET4] && 1741 sc->sc_xfer[UMASS_T_CBI_STATUS]) ? 1742 UMASS_T_CBI_RESET4 : UMASS_T_CBI_COMMAND, 1743 UMASS_T_CBI_DATA_WRITE, error); 1744 } 1745 1746 static void 1747 umass_t_cbi_reset4_callback(struct usb_xfer *xfer, usb_error_t error) 1748 { 1749 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_COMMAND, 1750 UMASS_T_CBI_STATUS, error); 1751 } 1752 1753 static void 1754 umass_t_cbi_data_clear_stall_callback(struct usb_xfer *xfer, 1755 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1756 { 1757 struct umass_softc *sc = usbd_xfer_softc(xfer); 1758 1759 switch (USB_GET_STATE(xfer)) { 1760 case USB_ST_TRANSFERRED: 1761 tr_transferred: 1762 if (next_xfer == UMASS_T_CBI_STATUS) { 1763 umass_cbi_start_status(sc); 1764 } else { 1765 umass_transfer_start(sc, next_xfer); 1766 } 1767 break; 1768 1769 case USB_ST_SETUP: 1770 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1771 goto tr_transferred; /* should not happen */ 1772 } 1773 break; 1774 1775 default: /* Error */ 1776 umass_tr_error(xfer, error); 1777 break; 1778 } 1779 } 1780 1781 static void 1782 umass_t_cbi_command_callback(struct usb_xfer *xfer, usb_error_t error) 1783 { 1784 struct umass_softc *sc = usbd_xfer_softc(xfer); 1785 union ccb *ccb = sc->sc_transfer.ccb; 1786 struct usb_device_request req; 1787 struct usb_page_cache *pc; 1788 1789 switch (USB_GET_STATE(xfer)) { 1790 case USB_ST_TRANSFERRED: 1791 1792 if (sc->sc_transfer.dir == DIR_NONE) { 1793 umass_cbi_start_status(sc); 1794 } else { 1795 umass_transfer_start 1796 (sc, (sc->sc_transfer.dir == DIR_IN) ? 1797 UMASS_T_CBI_DATA_READ : UMASS_T_CBI_DATA_WRITE); 1798 } 1799 break; 1800 1801 case USB_ST_SETUP: 1802 1803 if (ccb) { 1804 /* 1805 * do a CBI transfer with cmd_len bytes from 1806 * cmd_data, possibly a data phase of data_len 1807 * bytes from/to the device and finally a status 1808 * read phase. 1809 */ 1810 1811 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1812 req.bRequest = UR_CBI_ADSC; 1813 USETW(req.wValue, 0); 1814 req.wIndex[0] = sc->sc_iface_no; 1815 req.wIndex[1] = 0; 1816 req.wLength[0] = sc->sc_transfer.cmd_len; 1817 req.wLength[1] = 0; 1818 1819 pc = usbd_xfer_get_frame(xfer, 0); 1820 usbd_copy_in(pc, 0, &req, sizeof(req)); 1821 pc = usbd_xfer_get_frame(xfer, 1); 1822 usbd_copy_in(pc, 0, sc->sc_transfer.cmd_data, 1823 sc->sc_transfer.cmd_len); 1824 1825 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1826 usbd_xfer_set_frame_len(xfer, 1, sc->sc_transfer.cmd_len); 1827 usbd_xfer_set_frames(xfer, 1828 sc->sc_transfer.cmd_len ? 2 : 1); 1829 1830 DIF(UDMASS_CBI, 1831 umass_cbi_dump_cmd(sc, 1832 sc->sc_transfer.cmd_data, 1833 sc->sc_transfer.cmd_len)); 1834 1835 usbd_transfer_submit(xfer); 1836 } 1837 break; 1838 1839 default: /* Error */ 1840 /* 1841 * STALL on the control pipe can be result of the command error. 1842 * Attempt to clear this STALL same as for bulk pipe also 1843 * results in command completion interrupt, but ASC/ASCQ there 1844 * look like not always valid, so don't bother about it. 1845 */ 1846 if ((error == USB_ERR_STALLED) || 1847 (sc->sc_transfer.callback == &umass_cam_cb)) { 1848 sc->sc_transfer.ccb = NULL; 1849 (sc->sc_transfer.callback) 1850 (sc, ccb, sc->sc_transfer.data_len, 1851 STATUS_CMD_UNKNOWN); 1852 } else { 1853 umass_tr_error(xfer, error); 1854 /* skip reset */ 1855 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1856 } 1857 break; 1858 } 1859 } 1860 1861 static void 1862 umass_t_cbi_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1863 { 1864 struct umass_softc *sc = usbd_xfer_softc(xfer); 1865 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1866 int actlen, sumlen; 1867 1868 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1869 1870 switch (USB_GET_STATE(xfer)) { 1871 case USB_ST_TRANSFERRED: 1872 sc->sc_transfer.data_rem -= actlen; 1873 sc->sc_transfer.data_ptr += actlen; 1874 sc->sc_transfer.actlen += actlen; 1875 1876 if (actlen < sumlen) { 1877 /* short transfer */ 1878 sc->sc_transfer.data_rem = 0; 1879 } 1880 case USB_ST_SETUP: 1881 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1882 max_bulk, sc->sc_transfer.data_rem); 1883 1884 if (sc->sc_transfer.data_rem == 0) { 1885 umass_cbi_start_status(sc); 1886 break; 1887 } 1888 if (max_bulk > sc->sc_transfer.data_rem) { 1889 max_bulk = sc->sc_transfer.data_rem; 1890 } 1891 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1892 1893 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1894 max_bulk); 1895 1896 usbd_transfer_submit(xfer); 1897 break; 1898 1899 default: /* Error */ 1900 if ((error == USB_ERR_CANCELLED) || 1901 (sc->sc_transfer.callback != &umass_cam_cb)) { 1902 umass_tr_error(xfer, error); 1903 } else { 1904 umass_transfer_start(sc, UMASS_T_CBI_DATA_RD_CS); 1905 } 1906 break; 1907 } 1908 } 1909 1910 static void 1911 umass_t_cbi_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1912 { 1913 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1914 UMASS_T_CBI_DATA_READ, error); 1915 } 1916 1917 static void 1918 umass_t_cbi_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1919 { 1920 struct umass_softc *sc = usbd_xfer_softc(xfer); 1921 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1922 int actlen, sumlen; 1923 1924 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1925 1926 switch (USB_GET_STATE(xfer)) { 1927 case USB_ST_TRANSFERRED: 1928 sc->sc_transfer.data_rem -= actlen; 1929 sc->sc_transfer.data_ptr += actlen; 1930 sc->sc_transfer.actlen += actlen; 1931 1932 if (actlen < sumlen) { 1933 /* short transfer */ 1934 sc->sc_transfer.data_rem = 0; 1935 } 1936 case USB_ST_SETUP: 1937 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1938 max_bulk, sc->sc_transfer.data_rem); 1939 1940 if (sc->sc_transfer.data_rem == 0) { 1941 umass_cbi_start_status(sc); 1942 break; 1943 } 1944 if (max_bulk > sc->sc_transfer.data_rem) { 1945 max_bulk = sc->sc_transfer.data_rem; 1946 } 1947 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1948 1949 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1950 max_bulk); 1951 1952 usbd_transfer_submit(xfer); 1953 break; 1954 1955 default: /* Error */ 1956 if ((error == USB_ERR_CANCELLED) || 1957 (sc->sc_transfer.callback != &umass_cam_cb)) { 1958 umass_tr_error(xfer, error); 1959 } else { 1960 umass_transfer_start(sc, UMASS_T_CBI_DATA_WR_CS); 1961 } 1962 break; 1963 } 1964 } 1965 1966 static void 1967 umass_t_cbi_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1968 { 1969 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1970 UMASS_T_CBI_DATA_WRITE, error); 1971 } 1972 1973 static void 1974 umass_t_cbi_status_callback(struct usb_xfer *xfer, usb_error_t error) 1975 { 1976 struct umass_softc *sc = usbd_xfer_softc(xfer); 1977 union ccb *ccb = sc->sc_transfer.ccb; 1978 struct usb_page_cache *pc; 1979 uint32_t residue; 1980 uint8_t status; 1981 int actlen; 1982 1983 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1984 1985 switch (USB_GET_STATE(xfer)) { 1986 case USB_ST_TRANSFERRED: 1987 1988 if (actlen < (int)sizeof(sc->sbl)) { 1989 goto tr_setup; 1990 } 1991 pc = usbd_xfer_get_frame(xfer, 0); 1992 usbd_copy_out(pc, 0, &sc->sbl, sizeof(sc->sbl)); 1993 1994 residue = (sc->sc_transfer.data_len - 1995 sc->sc_transfer.actlen); 1996 1997 /* dissect the information in the buffer */ 1998 1999 if (sc->sc_proto & UMASS_PROTO_UFI) { 2000 /* 2001 * Section 3.4.3.1.3 specifies that the UFI command 2002 * protocol returns an ASC and ASCQ in the interrupt 2003 * data block. 2004 */ 2005 2006 DPRINTF(sc, UDMASS_CBI, "UFI CCI, ASC = 0x%02x, " 2007 "ASCQ = 0x%02x\n", sc->sbl.ufi.asc, 2008 sc->sbl.ufi.ascq); 2009 2010 status = (((sc->sbl.ufi.asc == 0) && 2011 (sc->sbl.ufi.ascq == 0)) ? 2012 STATUS_CMD_OK : STATUS_CMD_FAILED); 2013 2014 sc->sc_transfer.ccb = NULL; 2015 2016 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2017 2018 (sc->sc_transfer.callback) 2019 (sc, ccb, residue, status); 2020 2021 break; 2022 2023 } else { 2024 /* Command Interrupt Data Block */ 2025 2026 DPRINTF(sc, UDMASS_CBI, "type=0x%02x, value=0x%02x\n", 2027 sc->sbl.common.type, sc->sbl.common.value); 2028 2029 if (sc->sbl.common.type == IDB_TYPE_CCI) { 2030 status = (sc->sbl.common.value & IDB_VALUE_STATUS_MASK); 2031 2032 status = ((status == IDB_VALUE_PASS) ? STATUS_CMD_OK : 2033 (status == IDB_VALUE_FAIL) ? STATUS_CMD_FAILED : 2034 (status == IDB_VALUE_PERSISTENT) ? STATUS_CMD_FAILED : 2035 STATUS_WIRE_FAILED); 2036 2037 sc->sc_transfer.ccb = NULL; 2038 2039 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2040 2041 (sc->sc_transfer.callback) 2042 (sc, ccb, residue, status); 2043 2044 break; 2045 } 2046 } 2047 2048 /* fallthrough */ 2049 2050 case USB_ST_SETUP: 2051 tr_setup: 2052 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 2053 usbd_transfer_submit(xfer); 2054 break; 2055 2056 default: /* Error */ 2057 DPRINTF(sc, UDMASS_CBI, "Failed to read CSW: %s\n", 2058 usbd_errstr(error)); 2059 umass_tr_error(xfer, error); 2060 break; 2061 } 2062 } 2063 2064 /* 2065 * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI)) 2066 */ 2067 2068 static int 2069 umass_cam_attach_sim(struct umass_softc *sc) 2070 { 2071 struct cam_devq *devq; /* Per device Queue */ 2072 cam_status status; 2073 2074 /* 2075 * A HBA is attached to the CAM layer. 2076 * 2077 * The CAM layer will then after a while start probing for devices on 2078 * the bus. The number of SIMs is limited to one. 2079 */ 2080 2081 devq = cam_simq_alloc(1 /* maximum openings */ ); 2082 if (devq == NULL) { 2083 return (ENOMEM); 2084 } 2085 sc->sc_sim = cam_sim_alloc 2086 (&umass_cam_action, &umass_cam_poll, 2087 DEVNAME_SIM, 2088 sc /* priv */ , 2089 sc->sc_unit /* unit number */ , 2090 &sc->sc_mtx /* mutex */ , 2091 1 /* maximum device openings */ , 2092 0 /* maximum tagged device openings */ , 2093 devq); 2094 2095 if (sc->sc_sim == NULL) { 2096 cam_simq_free(devq); 2097 return (ENOMEM); 2098 } 2099 2100 mtx_lock(&sc->sc_mtx); 2101 status = xpt_bus_register(sc->sc_sim, sc->sc_dev, sc->sc_unit); 2102 if (status != CAM_SUCCESS) { 2103 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2104 mtx_unlock(&sc->sc_mtx); 2105 printf("%s: xpt_bus_register failed with status %#x\n", 2106 __func__, status); 2107 return (ENOMEM); 2108 } 2109 mtx_unlock(&sc->sc_mtx); 2110 2111 return (0); 2112 } 2113 2114 static void 2115 umass_cam_attach(struct umass_softc *sc) 2116 { 2117 #ifndef USB_DEBUG 2118 if (bootverbose) 2119 #endif 2120 printf("%s:%d:%d: Attached to scbus%d\n", 2121 sc->sc_name, cam_sim_path(sc->sc_sim), 2122 sc->sc_unit, cam_sim_path(sc->sc_sim)); 2123 } 2124 2125 /* umass_cam_detach 2126 * detach from the CAM layer 2127 */ 2128 2129 static void 2130 umass_cam_detach_sim(struct umass_softc *sc) 2131 { 2132 cam_status status; 2133 2134 if (sc->sc_sim != NULL) { 2135 status = xpt_bus_deregister(cam_sim_path(sc->sc_sim)); 2136 if (status == CAM_REQ_CMP) { 2137 /* accessing the softc is not possible after this */ 2138 sc->sc_sim->softc = NULL; 2139 DPRINTF(sc, UDMASS_SCSI, "%s: %s:%d:%d caling " 2140 "cam_sim_free sim %p refc %u mtx %p\n", 2141 __func__, sc->sc_name, cam_sim_path(sc->sc_sim), 2142 sc->sc_unit, sc->sc_sim, 2143 sc->sc_sim->refcount, sc->sc_sim->mtx); 2144 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2145 } else { 2146 panic("%s: %s: CAM layer is busy: %#x\n", 2147 __func__, sc->sc_name, status); 2148 } 2149 sc->sc_sim = NULL; 2150 } 2151 } 2152 2153 /* umass_cam_action 2154 * CAM requests for action come through here 2155 */ 2156 2157 static void 2158 umass_cam_action(struct cam_sim *sim, union ccb *ccb) 2159 { 2160 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2161 2162 if (sc == NULL) { 2163 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2164 xpt_done(ccb); 2165 return; 2166 } 2167 2168 /* Perform the requested action */ 2169 switch (ccb->ccb_h.func_code) { 2170 case XPT_SCSI_IO: 2171 { 2172 uint8_t *cmd; 2173 uint8_t dir; 2174 2175 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2176 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2177 } else { 2178 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2179 } 2180 2181 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2182 "cmd: 0x%02x, flags: 0x%02x, " 2183 "%db cmd/%db data/%db sense\n", 2184 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2185 (uintmax_t)ccb->ccb_h.target_lun, cmd[0], 2186 ccb->ccb_h.flags & CAM_DIR_MASK, ccb->csio.cdb_len, 2187 ccb->csio.dxfer_len, ccb->csio.sense_len); 2188 2189 if (sc->sc_transfer.ccb) { 2190 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2191 "I/O in progress, deferring\n", 2192 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2193 (uintmax_t)ccb->ccb_h.target_lun); 2194 ccb->ccb_h.status = CAM_SCSI_BUSY; 2195 xpt_done(ccb); 2196 goto done; 2197 } 2198 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 2199 case CAM_DIR_IN: 2200 dir = DIR_IN; 2201 break; 2202 case CAM_DIR_OUT: 2203 dir = DIR_OUT; 2204 DIF(UDMASS_SCSI, 2205 umass_dump_buffer(sc, ccb->csio.data_ptr, 2206 ccb->csio.dxfer_len, 48)); 2207 break; 2208 default: 2209 dir = DIR_NONE; 2210 } 2211 2212 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED; 2213 2214 /* 2215 * sc->sc_transform will convert the command to the 2216 * command format needed by the specific command set 2217 * and return the converted command in 2218 * "sc->sc_transfer.cmd_data" 2219 */ 2220 if (umass_std_transform(sc, ccb, cmd, ccb->csio.cdb_len)) { 2221 if (sc->sc_transfer.cmd_data[0] == INQUIRY) { 2222 const char *pserial; 2223 2224 pserial = usb_get_serial(sc->sc_udev); 2225 2226 /* 2227 * Umass devices don't generally report their serial numbers 2228 * in the usual SCSI way. Emulate it here. 2229 */ 2230 if ((sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2231 (sc->sc_transfer.cmd_data[2] == SVPD_UNIT_SERIAL_NUMBER) && 2232 (pserial[0] != '\0')) { 2233 struct scsi_vpd_unit_serial_number *vpd_serial; 2234 2235 vpd_serial = (struct scsi_vpd_unit_serial_number *)ccb->csio.data_ptr; 2236 vpd_serial->length = strlen(pserial); 2237 if (vpd_serial->length > sizeof(vpd_serial->serial_num)) 2238 vpd_serial->length = sizeof(vpd_serial->serial_num); 2239 memcpy(vpd_serial->serial_num, pserial, vpd_serial->length); 2240 ccb->csio.scsi_status = SCSI_STATUS_OK; 2241 ccb->ccb_h.status = CAM_REQ_CMP; 2242 xpt_done(ccb); 2243 goto done; 2244 } 2245 2246 /* 2247 * Handle EVPD inquiry for broken devices first 2248 * NO_INQUIRY also implies NO_INQUIRY_EVPD 2249 */ 2250 if ((sc->sc_quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) && 2251 (sc->sc_transfer.cmd_data[1] & SI_EVPD)) { 2252 scsi_set_sense_data(&ccb->csio.sense_data, 2253 /*sense_format*/ SSD_TYPE_NONE, 2254 /*current_error*/ 1, 2255 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST, 2256 /*asc*/ 0x24, 2257 /*ascq*/ 0x00, 2258 /*extra args*/ SSD_ELEM_NONE); 2259 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2260 ccb->ccb_h.status = 2261 CAM_SCSI_STATUS_ERROR | 2262 CAM_AUTOSNS_VALID | 2263 CAM_DEV_QFRZN; 2264 xpt_freeze_devq(ccb->ccb_h.path, 1); 2265 xpt_done(ccb); 2266 goto done; 2267 } 2268 /* 2269 * Return fake inquiry data for 2270 * broken devices 2271 */ 2272 if (sc->sc_quirks & NO_INQUIRY) { 2273 memcpy(ccb->csio.data_ptr, &fake_inq_data, 2274 sizeof(fake_inq_data)); 2275 ccb->csio.scsi_status = SCSI_STATUS_OK; 2276 ccb->ccb_h.status = CAM_REQ_CMP; 2277 xpt_done(ccb); 2278 goto done; 2279 } 2280 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2281 ccb->csio.dxfer_len = SHORT_INQUIRY_LENGTH; 2282 } 2283 } else if (sc->sc_transfer.cmd_data[0] == PREVENT_ALLOW) { 2284 if (sc->sc_quirks & NO_PREVENT_ALLOW) { 2285 ccb->csio.scsi_status = SCSI_STATUS_OK; 2286 ccb->ccb_h.status = CAM_REQ_CMP; 2287 xpt_done(ccb); 2288 goto done; 2289 } 2290 } else if (sc->sc_transfer.cmd_data[0] == SYNCHRONIZE_CACHE) { 2291 if (sc->sc_quirks & NO_SYNCHRONIZE_CACHE) { 2292 ccb->csio.scsi_status = SCSI_STATUS_OK; 2293 ccb->ccb_h.status = CAM_REQ_CMP; 2294 xpt_done(ccb); 2295 goto done; 2296 } 2297 } 2298 umass_command_start(sc, dir, ccb->csio.data_ptr, 2299 ccb->csio.dxfer_len, 2300 ccb->ccb_h.timeout, 2301 &umass_cam_cb, ccb); 2302 } 2303 break; 2304 } 2305 case XPT_PATH_INQ: 2306 { 2307 struct ccb_pathinq *cpi = &ccb->cpi; 2308 2309 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_PATH_INQ:.\n", 2310 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2311 (uintmax_t)ccb->ccb_h.target_lun); 2312 2313 /* host specific information */ 2314 cpi->version_num = 1; 2315 cpi->hba_inquiry = 0; 2316 cpi->target_sprt = 0; 2317 cpi->hba_misc = PIM_NO_6_BYTE; 2318 cpi->hba_eng_cnt = 0; 2319 cpi->max_target = UMASS_SCSIID_MAX; /* one target */ 2320 cpi->initiator_id = UMASS_SCSIID_HOST; 2321 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2322 strlcpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN); 2323 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2324 cpi->unit_number = cam_sim_unit(sim); 2325 cpi->bus_id = sc->sc_unit; 2326 cpi->protocol = PROTO_SCSI; 2327 cpi->protocol_version = SCSI_REV_2; 2328 cpi->transport = XPORT_USB; 2329 cpi->transport_version = 0; 2330 2331 if (sc == NULL) { 2332 cpi->base_transfer_speed = 0; 2333 cpi->max_lun = 0; 2334 } else { 2335 if (sc->sc_quirks & FLOPPY_SPEED) { 2336 cpi->base_transfer_speed = 2337 UMASS_FLOPPY_TRANSFER_SPEED; 2338 } else { 2339 switch (usbd_get_speed(sc->sc_udev)) { 2340 case USB_SPEED_SUPER: 2341 cpi->base_transfer_speed = 2342 UMASS_SUPER_TRANSFER_SPEED; 2343 cpi->maxio = maxphys; 2344 break; 2345 case USB_SPEED_HIGH: 2346 cpi->base_transfer_speed = 2347 UMASS_HIGH_TRANSFER_SPEED; 2348 break; 2349 default: 2350 cpi->base_transfer_speed = 2351 UMASS_FULL_TRANSFER_SPEED; 2352 break; 2353 } 2354 } 2355 cpi->max_lun = sc->sc_maxlun; 2356 } 2357 2358 cpi->ccb_h.status = CAM_REQ_CMP; 2359 xpt_done(ccb); 2360 break; 2361 } 2362 case XPT_RESET_DEV: 2363 { 2364 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_RESET_DEV:.\n", 2365 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2366 (uintmax_t)ccb->ccb_h.target_lun); 2367 2368 umass_reset(sc); 2369 2370 ccb->ccb_h.status = CAM_REQ_CMP; 2371 xpt_done(ccb); 2372 break; 2373 } 2374 case XPT_GET_TRAN_SETTINGS: 2375 { 2376 struct ccb_trans_settings *cts = &ccb->cts; 2377 2378 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_GET_TRAN_SETTINGS:.\n", 2379 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2380 (uintmax_t)ccb->ccb_h.target_lun); 2381 2382 cts->protocol = PROTO_SCSI; 2383 cts->protocol_version = SCSI_REV_2; 2384 cts->transport = XPORT_USB; 2385 cts->transport_version = 0; 2386 cts->xport_specific.valid = 0; 2387 2388 ccb->ccb_h.status = CAM_REQ_CMP; 2389 xpt_done(ccb); 2390 break; 2391 } 2392 case XPT_SET_TRAN_SETTINGS: 2393 { 2394 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SET_TRAN_SETTINGS:.\n", 2395 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2396 (uintmax_t)ccb->ccb_h.target_lun); 2397 2398 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2399 xpt_done(ccb); 2400 break; 2401 } 2402 case XPT_CALC_GEOMETRY: 2403 { 2404 cam_calc_geometry(&ccb->ccg, /* extended */ 1); 2405 xpt_done(ccb); 2406 break; 2407 } 2408 case XPT_NOOP: 2409 { 2410 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_NOOP:.\n", 2411 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2412 (uintmax_t)ccb->ccb_h.target_lun); 2413 2414 ccb->ccb_h.status = CAM_REQ_CMP; 2415 xpt_done(ccb); 2416 break; 2417 } 2418 default: 2419 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:func_code 0x%04x: " 2420 "Not implemented\n", 2421 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2422 (uintmax_t)ccb->ccb_h.target_lun, ccb->ccb_h.func_code); 2423 2424 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2425 xpt_done(ccb); 2426 break; 2427 } 2428 2429 done: 2430 return; 2431 } 2432 2433 static void 2434 umass_cam_poll(struct cam_sim *sim) 2435 { 2436 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2437 2438 if (sc == NULL) 2439 return; 2440 2441 DPRINTF(sc, UDMASS_SCSI, "CAM poll\n"); 2442 2443 usbd_transfer_poll(sc->sc_xfer, UMASS_T_MAX); 2444 } 2445 2446 /* umass_cam_cb 2447 * finalise a completed CAM command 2448 */ 2449 2450 static void 2451 umass_cam_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2452 uint8_t status) 2453 { 2454 ccb->csio.resid = residue; 2455 2456 switch (status) { 2457 case STATUS_CMD_OK: 2458 ccb->ccb_h.status = CAM_REQ_CMP; 2459 if ((sc->sc_quirks & READ_CAPACITY_OFFBY1) && 2460 (ccb->ccb_h.func_code == XPT_SCSI_IO) && 2461 (ccb->csio.cdb_io.cdb_bytes[0] == READ_CAPACITY)) { 2462 struct scsi_read_capacity_data *rcap; 2463 uint32_t maxsector; 2464 2465 rcap = (void *)(ccb->csio.data_ptr); 2466 maxsector = scsi_4btoul(rcap->addr) - 1; 2467 scsi_ulto4b(maxsector, rcap->addr); 2468 } 2469 /* 2470 * We have to add SVPD_UNIT_SERIAL_NUMBER to the list 2471 * of pages supported by the device - otherwise, CAM 2472 * will never ask us for the serial number if the 2473 * device cannot handle that by itself. 2474 */ 2475 if (ccb->ccb_h.func_code == XPT_SCSI_IO && 2476 sc->sc_transfer.cmd_data[0] == INQUIRY && 2477 (sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2478 sc->sc_transfer.cmd_data[2] == SVPD_SUPPORTED_PAGE_LIST && 2479 (usb_get_serial(sc->sc_udev)[0] != '\0')) { 2480 struct ccb_scsiio *csio; 2481 struct scsi_vpd_supported_page_list *page_list; 2482 2483 csio = &ccb->csio; 2484 page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; 2485 if (page_list->length + 1 < SVPD_SUPPORTED_PAGES_SIZE) { 2486 page_list->list[page_list->length] = SVPD_UNIT_SERIAL_NUMBER; 2487 page_list->length++; 2488 } 2489 } 2490 xpt_done(ccb); 2491 break; 2492 2493 case STATUS_CMD_UNKNOWN: 2494 case STATUS_CMD_FAILED: 2495 2496 /* fetch sense data */ 2497 2498 /* the rest of the command was filled in at attach */ 2499 sc->cam_scsi_sense.length = ccb->csio.sense_len; 2500 2501 DPRINTF(sc, UDMASS_SCSI, "Fetching %d bytes of " 2502 "sense data\n", ccb->csio.sense_len); 2503 2504 if (umass_std_transform(sc, ccb, &sc->cam_scsi_sense.opcode, 2505 sizeof(sc->cam_scsi_sense))) { 2506 if ((sc->sc_quirks & FORCE_SHORT_INQUIRY) && 2507 (sc->sc_transfer.cmd_data[0] == INQUIRY)) { 2508 ccb->csio.sense_len = SHORT_INQUIRY_LENGTH; 2509 } 2510 umass_command_start(sc, DIR_IN, &ccb->csio.sense_data.error_code, 2511 ccb->csio.sense_len, ccb->ccb_h.timeout, 2512 &umass_cam_sense_cb, ccb); 2513 } 2514 break; 2515 2516 default: 2517 /* 2518 * The wire protocol failed and will hopefully have 2519 * recovered. We return an error to CAM and let CAM 2520 * retry the command if necessary. 2521 */ 2522 xpt_freeze_devq(ccb->ccb_h.path, 1); 2523 ccb->ccb_h.status = CAM_REQ_CMP_ERR | CAM_DEV_QFRZN; 2524 xpt_done(ccb); 2525 break; 2526 } 2527 } 2528 2529 /* 2530 * Finalise a completed autosense operation 2531 */ 2532 static void 2533 umass_cam_sense_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2534 uint8_t status) 2535 { 2536 uint8_t *cmd; 2537 2538 switch (status) { 2539 case STATUS_CMD_OK: 2540 case STATUS_CMD_UNKNOWN: 2541 case STATUS_CMD_FAILED: { 2542 int key, sense_len; 2543 2544 ccb->csio.sense_resid = residue; 2545 sense_len = ccb->csio.sense_len - ccb->csio.sense_resid; 2546 key = scsi_get_sense_key(&ccb->csio.sense_data, sense_len, 2547 /*show_errors*/ 1); 2548 2549 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2550 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2551 } else { 2552 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2553 } 2554 2555 /* 2556 * Getting sense data always succeeds (apart from wire 2557 * failures): 2558 */ 2559 if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2560 (cmd[0] == INQUIRY) && 2561 (key == SSD_KEY_UNIT_ATTENTION)) { 2562 /* 2563 * Ignore unit attention errors in the case where 2564 * the Unit Attention state is not cleared on 2565 * REQUEST SENSE. They will appear again at the next 2566 * command. 2567 */ 2568 ccb->ccb_h.status = CAM_REQ_CMP; 2569 } else if (key == SSD_KEY_NO_SENSE) { 2570 /* 2571 * No problem after all (in the case of CBI without 2572 * CCI) 2573 */ 2574 ccb->ccb_h.status = CAM_REQ_CMP; 2575 } else if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2576 (cmd[0] == READ_CAPACITY) && 2577 (key == SSD_KEY_UNIT_ATTENTION)) { 2578 /* 2579 * Some devices do not clear the unit attention error 2580 * on request sense. We insert a test unit ready 2581 * command to make sure we clear the unit attention 2582 * condition, then allow the retry to proceed as 2583 * usual. 2584 */ 2585 2586 xpt_freeze_devq(ccb->ccb_h.path, 1); 2587 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2588 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2589 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2590 2591 #if 0 2592 DELAY(300000); 2593 #endif 2594 DPRINTF(sc, UDMASS_SCSI, "Doing a sneaky" 2595 "TEST_UNIT_READY\n"); 2596 2597 /* the rest of the command was filled in at attach */ 2598 2599 if ((sc->sc_transform)(sc, 2600 &sc->cam_scsi_test_unit_ready.opcode, 2601 sizeof(sc->cam_scsi_test_unit_ready)) == 1) { 2602 umass_command_start(sc, DIR_NONE, NULL, 0, 2603 ccb->ccb_h.timeout, 2604 &umass_cam_quirk_cb, ccb); 2605 break; 2606 } 2607 } else { 2608 xpt_freeze_devq(ccb->ccb_h.path, 1); 2609 if (key >= 0) { 2610 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2611 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2612 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2613 } else 2614 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL 2615 | CAM_DEV_QFRZN; 2616 } 2617 xpt_done(ccb); 2618 break; 2619 } 2620 default: 2621 DPRINTF(sc, UDMASS_SCSI, "Autosense failed, " 2622 "status %d\n", status); 2623 xpt_freeze_devq(ccb->ccb_h.path, 1); 2624 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL | CAM_DEV_QFRZN; 2625 xpt_done(ccb); 2626 } 2627 } 2628 2629 /* 2630 * This completion code just handles the fact that we sent a test-unit-ready 2631 * after having previously failed a READ CAPACITY with CHECK_COND. The CCB 2632 * status for CAM is already set earlier. 2633 */ 2634 static void 2635 umass_cam_quirk_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2636 uint8_t status) 2637 { 2638 DPRINTF(sc, UDMASS_SCSI, "Test unit ready " 2639 "returned status %d\n", status); 2640 2641 xpt_done(ccb); 2642 } 2643 2644 /* 2645 * SCSI specific functions 2646 */ 2647 2648 static uint8_t 2649 umass_scsi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2650 uint8_t cmd_len) 2651 { 2652 if ((cmd_len == 0) || 2653 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2654 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2655 "length: %d bytes\n", cmd_len); 2656 return (0); /* failure */ 2657 } 2658 sc->sc_transfer.cmd_len = cmd_len; 2659 2660 switch (cmd_ptr[0]) { 2661 case TEST_UNIT_READY: 2662 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2663 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2664 "to START_UNIT\n"); 2665 memset(sc->sc_transfer.cmd_data, 0, cmd_len); 2666 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2667 sc->sc_transfer.cmd_data[4] = SSS_START; 2668 return (1); 2669 } 2670 break; 2671 2672 case INQUIRY: 2673 /* 2674 * some drives wedge when asked for full inquiry 2675 * information. 2676 */ 2677 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2678 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2679 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2680 return (1); 2681 } 2682 break; 2683 } 2684 2685 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2686 return (1); 2687 } 2688 2689 static uint8_t 2690 umass_rbc_transform(struct umass_softc *sc, uint8_t *cmd_ptr, uint8_t cmd_len) 2691 { 2692 if ((cmd_len == 0) || 2693 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2694 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2695 "length: %d bytes\n", cmd_len); 2696 return (0); /* failure */ 2697 } 2698 switch (cmd_ptr[0]) { 2699 /* these commands are defined in RBC: */ 2700 case READ_10: 2701 case READ_CAPACITY: 2702 case START_STOP_UNIT: 2703 case SYNCHRONIZE_CACHE: 2704 case WRITE_10: 2705 case VERIFY_10: 2706 case INQUIRY: 2707 case MODE_SELECT_10: 2708 case MODE_SENSE_10: 2709 case TEST_UNIT_READY: 2710 case WRITE_BUFFER: 2711 /* 2712 * The following commands are not listed in my copy of the 2713 * RBC specs. CAM however seems to want those, and at least 2714 * the Sony DSC device appears to support those as well 2715 */ 2716 case REQUEST_SENSE: 2717 case PREVENT_ALLOW: 2718 2719 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2720 2721 if ((sc->sc_quirks & RBC_PAD_TO_12) && (cmd_len < 12)) { 2722 memset(sc->sc_transfer.cmd_data + cmd_len, 2723 0, 12 - cmd_len); 2724 cmd_len = 12; 2725 } 2726 sc->sc_transfer.cmd_len = cmd_len; 2727 return (1); /* success */ 2728 2729 /* All other commands are not legal in RBC */ 2730 default: 2731 DPRINTF(sc, UDMASS_SCSI, "Unsupported RBC " 2732 "command 0x%02x\n", cmd_ptr[0]); 2733 return (0); /* failure */ 2734 } 2735 } 2736 2737 static uint8_t 2738 umass_ufi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2739 uint8_t cmd_len) 2740 { 2741 if ((cmd_len == 0) || 2742 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2743 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2744 "length: %d bytes\n", cmd_len); 2745 return (0); /* failure */ 2746 } 2747 /* An UFI command is always 12 bytes in length */ 2748 sc->sc_transfer.cmd_len = UFI_COMMAND_LENGTH; 2749 2750 /* Zero the command data */ 2751 memset(sc->sc_transfer.cmd_data, 0, UFI_COMMAND_LENGTH); 2752 2753 switch (cmd_ptr[0]) { 2754 /* 2755 * Commands of which the format has been verified. They 2756 * should work. Copy the command into the (zeroed out) 2757 * destination buffer. 2758 */ 2759 case TEST_UNIT_READY: 2760 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2761 /* 2762 * Some devices do not support this command. Start 2763 * Stop Unit should give the same results 2764 */ 2765 DPRINTF(sc, UDMASS_UFI, "Converted TEST_UNIT_READY " 2766 "to START_UNIT\n"); 2767 2768 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2769 sc->sc_transfer.cmd_data[4] = SSS_START; 2770 return (1); 2771 } 2772 break; 2773 2774 case REZERO_UNIT: 2775 case REQUEST_SENSE: 2776 case FORMAT_UNIT: 2777 case INQUIRY: 2778 case START_STOP_UNIT: 2779 case SEND_DIAGNOSTIC: 2780 case PREVENT_ALLOW: 2781 case READ_CAPACITY: 2782 case READ_10: 2783 case WRITE_10: 2784 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2785 case WRITE_AND_VERIFY: 2786 case VERIFY: 2787 case MODE_SELECT_10: 2788 case MODE_SENSE_10: 2789 case READ_12: 2790 case WRITE_12: 2791 case READ_FORMAT_CAPACITIES: 2792 break; 2793 2794 /* 2795 * SYNCHRONIZE_CACHE isn't supported by UFI, nor should it be 2796 * required for UFI devices, so it is appropriate to fake 2797 * success. 2798 */ 2799 case SYNCHRONIZE_CACHE: 2800 return (2); 2801 2802 default: 2803 DPRINTF(sc, UDMASS_SCSI, "Unsupported UFI " 2804 "command 0x%02x\n", cmd_ptr[0]); 2805 return (0); /* failure */ 2806 } 2807 2808 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2809 return (1); /* success */ 2810 } 2811 2812 /* 2813 * 8070i (ATAPI) specific functions 2814 */ 2815 static uint8_t 2816 umass_atapi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2817 uint8_t cmd_len) 2818 { 2819 if ((cmd_len == 0) || 2820 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2821 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2822 "length: %d bytes\n", cmd_len); 2823 return (0); /* failure */ 2824 } 2825 /* An ATAPI command is always 12 bytes in length. */ 2826 sc->sc_transfer.cmd_len = ATAPI_COMMAND_LENGTH; 2827 2828 /* Zero the command data */ 2829 memset(sc->sc_transfer.cmd_data, 0, ATAPI_COMMAND_LENGTH); 2830 2831 switch (cmd_ptr[0]) { 2832 /* 2833 * Commands of which the format has been verified. They 2834 * should work. Copy the command into the destination 2835 * buffer. 2836 */ 2837 case INQUIRY: 2838 /* 2839 * some drives wedge when asked for full inquiry 2840 * information. 2841 */ 2842 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2843 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2844 2845 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2846 return (1); 2847 } 2848 break; 2849 2850 case TEST_UNIT_READY: 2851 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2852 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2853 "to START_UNIT\n"); 2854 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2855 sc->sc_transfer.cmd_data[4] = SSS_START; 2856 return (1); 2857 } 2858 break; 2859 2860 case REZERO_UNIT: 2861 case REQUEST_SENSE: 2862 case START_STOP_UNIT: 2863 case SEND_DIAGNOSTIC: 2864 case PREVENT_ALLOW: 2865 case READ_CAPACITY: 2866 case READ_10: 2867 case WRITE_10: 2868 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2869 case SYNCHRONIZE_CACHE: 2870 case MODE_SELECT_10: 2871 case MODE_SENSE_10: 2872 case READ_BUFFER: 2873 case 0x42: /* READ_SUBCHANNEL */ 2874 case 0x43: /* READ_TOC */ 2875 case 0x44: /* READ_HEADER */ 2876 case 0x47: /* PLAY_MSF (Play Minute/Second/Frame) */ 2877 case 0x48: /* PLAY_TRACK */ 2878 case 0x49: /* PLAY_TRACK_REL */ 2879 case 0x4b: /* PAUSE */ 2880 case 0x51: /* READ_DISK_INFO */ 2881 case 0x52: /* READ_TRACK_INFO */ 2882 case 0x54: /* SEND_OPC */ 2883 case 0x59: /* READ_MASTER_CUE */ 2884 case 0x5b: /* CLOSE_TR_SESSION */ 2885 case 0x5c: /* READ_BUFFER_CAP */ 2886 case 0x5d: /* SEND_CUE_SHEET */ 2887 case 0xa1: /* BLANK */ 2888 case 0xa5: /* PLAY_12 */ 2889 case 0xa6: /* EXCHANGE_MEDIUM */ 2890 case 0xad: /* READ_DVD_STRUCTURE */ 2891 case 0xbb: /* SET_CD_SPEED */ 2892 case 0xe5: /* READ_TRACK_INFO_PHILIPS */ 2893 break; 2894 2895 case READ_12: 2896 case WRITE_12: 2897 default: 2898 DPRINTF(sc, UDMASS_SCSI, "Unsupported ATAPI " 2899 "command 0x%02x - trying anyway\n", 2900 cmd_ptr[0]); 2901 break; 2902 } 2903 2904 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2905 return (1); /* success */ 2906 } 2907 2908 static uint8_t 2909 umass_no_transform(struct umass_softc *sc, uint8_t *cmd, 2910 uint8_t cmdlen) 2911 { 2912 return (0); /* failure */ 2913 } 2914 2915 static uint8_t 2916 umass_std_transform(struct umass_softc *sc, union ccb *ccb, 2917 uint8_t *cmd, uint8_t cmdlen) 2918 { 2919 uint8_t retval; 2920 2921 retval = (sc->sc_transform) (sc, cmd, cmdlen); 2922 2923 if (retval == 2) { 2924 ccb->ccb_h.status = CAM_REQ_CMP; 2925 xpt_done(ccb); 2926 return (0); 2927 } else if (retval == 0) { 2928 xpt_freeze_devq(ccb->ccb_h.path, 1); 2929 ccb->ccb_h.status = CAM_REQ_INVALID | CAM_DEV_QFRZN; 2930 xpt_done(ccb); 2931 return (0); 2932 } 2933 /* Command should be executed */ 2934 return (1); 2935 } 2936 2937 #ifdef USB_DEBUG 2938 static void 2939 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2940 { 2941 uint8_t *c = cbw->CBWCDB; 2942 2943 uint32_t dlen = UGETDW(cbw->dCBWDataTransferLength); 2944 uint32_t tag = UGETDW(cbw->dCBWTag); 2945 2946 uint8_t clen = cbw->bCDBLength; 2947 uint8_t flags = cbw->bCBWFlags; 2948 uint8_t lun = cbw->bCBWLUN; 2949 2950 DPRINTF(sc, UDMASS_BBB, "CBW %d: cmd = %db " 2951 "(0x%02x%02x%02x%02x%02x%02x%s), " 2952 "data = %db, lun = %d, dir = %s\n", 2953 tag, clen, 2954 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6 ? "..." : ""), 2955 dlen, lun, (flags == CBWFLAGS_IN ? "in" : 2956 (flags == CBWFLAGS_OUT ? "out" : "<invalid>"))); 2957 } 2958 2959 static void 2960 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2961 { 2962 uint32_t sig = UGETDW(csw->dCSWSignature); 2963 uint32_t tag = UGETDW(csw->dCSWTag); 2964 uint32_t res = UGETDW(csw->dCSWDataResidue); 2965 uint8_t status = csw->bCSWStatus; 2966 2967 DPRINTF(sc, UDMASS_BBB, "CSW %d: sig = 0x%08x (%s), tag = 0x%08x, " 2968 "res = %d, status = 0x%02x (%s)\n", 2969 tag, sig, (sig == CSWSIGNATURE ? "valid" : "invalid"), 2970 tag, res, 2971 status, (status == CSWSTATUS_GOOD ? "good" : 2972 (status == CSWSTATUS_FAILED ? "failed" : 2973 (status == CSWSTATUS_PHASE ? "phase" : "<invalid>")))); 2974 } 2975 2976 static void 2977 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, uint8_t cmdlen) 2978 { 2979 uint8_t *c = cmd; 2980 uint8_t dir = sc->sc_transfer.dir; 2981 2982 DPRINTF(sc, UDMASS_BBB, "cmd = %db " 2983 "(0x%02x%02x%02x%02x%02x%02x%s), " 2984 "data = %db, dir = %s\n", 2985 cmdlen, 2986 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6 ? "..." : ""), 2987 sc->sc_transfer.data_len, 2988 (dir == DIR_IN ? "in" : 2989 (dir == DIR_OUT ? "out" : 2990 (dir == DIR_NONE ? "no data phase" : "<invalid>")))); 2991 } 2992 2993 static void 2994 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, uint32_t buflen, 2995 uint32_t printlen) 2996 { 2997 uint32_t i, j; 2998 char s1[40]; 2999 char s2[40]; 3000 char s3[5]; 3001 3002 s1[0] = '\0'; 3003 s3[0] = '\0'; 3004 3005 sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen); 3006 for (i = 0; (i < buflen) && (i < printlen); i++) { 3007 j = i % 16; 3008 if (j == 0 && i != 0) { 3009 DPRINTF(sc, UDMASS_GEN, "0x %s%s\n", 3010 s1, s2); 3011 s2[0] = '\0'; 3012 } 3013 sprintf(&s1[j * 2], "%02x", buffer[i] & 0xff); 3014 } 3015 if (buflen > printlen) 3016 sprintf(s3, " ..."); 3017 DPRINTF(sc, UDMASS_GEN, "0x %s%s%s\n", 3018 s1, s2, s3); 3019 } 3020 3021 #endif 3022