1 #include <sys/cdefs.h> 2 __FBSDID("$FreeBSD$"); 3 4 /*- 5 * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>, 6 * Nick Hibma <n_hibma@FreeBSD.org> 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 * 30 * $FreeBSD$ 31 * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $ 32 */ 33 34 /* Also already merged from NetBSD: 35 * $NetBSD: umass.c,v 1.67 2001/11/25 19:05:22 augustss Exp $ 36 * $NetBSD: umass.c,v 1.90 2002/11/04 19:17:33 pooka Exp $ 37 * $NetBSD: umass.c,v 1.108 2003/11/07 17:03:25 wiz Exp $ 38 * $NetBSD: umass.c,v 1.109 2003/12/04 13:57:31 keihan Exp $ 39 */ 40 41 /* 42 * Universal Serial Bus Mass Storage Class specs: 43 * http://www.usb.org/developers/devclass_docs/usb_msc_overview_1.2.pdf 44 * http://www.usb.org/developers/devclass_docs/usbmassbulk_10.pdf 45 * http://www.usb.org/developers/devclass_docs/usb_msc_cbi_1.1.pdf 46 * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf 47 */ 48 49 /* 50 * Ported to NetBSD by Lennart Augustsson <augustss@NetBSD.org>. 51 * Parts of the code written by Jason R. Thorpe <thorpej@shagadelic.org>. 52 */ 53 54 /* 55 * The driver handles 3 Wire Protocols 56 * - Command/Bulk/Interrupt (CBI) 57 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 58 * - Mass Storage Bulk-Only (BBB) 59 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 60 * 61 * Over these wire protocols it handles the following command protocols 62 * - SCSI 63 * - UFI (floppy command set) 64 * - 8070i (ATAPI) 65 * 66 * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The 67 * sc->sc_transform method is used to convert the commands into the appropriate 68 * format (if at all necessary). For example, UFI requires all commands to be 69 * 12 bytes in length amongst other things. 70 * 71 * The source code below is marked and can be split into a number of pieces 72 * (in this order): 73 * 74 * - probe/attach/detach 75 * - generic transfer routines 76 * - BBB 77 * - CBI 78 * - CBI_I (in addition to functions from CBI) 79 * - CAM (Common Access Method) 80 * - SCSI 81 * - UFI 82 * - 8070i (ATAPI) 83 * 84 * The protocols are implemented using a state machine, for the transfers as 85 * well as for the resets. The state machine is contained in umass_t_*_callback. 86 * The state machine is started through either umass_command_start() or 87 * umass_reset(). 88 * 89 * The reason for doing this is a) CAM performs a lot better this way and b) it 90 * avoids using tsleep from interrupt context (for example after a failed 91 * transfer). 92 */ 93 94 /* 95 * The SCSI related part of this driver has been derived from the 96 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@FreeBSD.org). 97 * 98 * The CAM layer uses so called actions which are messages sent to the host 99 * adapter for completion. The actions come in through umass_cam_action. The 100 * appropriate block of routines is called depending on the transport protocol 101 * in use. When the transfer has finished, these routines call 102 * umass_cam_cb again to complete the CAM command. 103 */ 104 105 #include <sys/stdint.h> 106 #include <sys/stddef.h> 107 #include <sys/param.h> 108 #include <sys/queue.h> 109 #include <sys/types.h> 110 #include <sys/systm.h> 111 #include <sys/kernel.h> 112 #include <sys/bus.h> 113 #include <sys/module.h> 114 #include <sys/lock.h> 115 #include <sys/mutex.h> 116 #include <sys/condvar.h> 117 #include <sys/sysctl.h> 118 #include <sys/sx.h> 119 #include <sys/unistd.h> 120 #include <sys/callout.h> 121 #include <sys/malloc.h> 122 #include <sys/priv.h> 123 124 #include <dev/usb/usb.h> 125 #include <dev/usb/usbdi.h> 126 #include <dev/usb/usbdi_util.h> 127 #include "usbdevs.h" 128 129 #include <dev/usb/quirk/usb_quirk.h> 130 131 #include <cam/cam.h> 132 #include <cam/cam_ccb.h> 133 #include <cam/cam_sim.h> 134 #include <cam/cam_xpt_sim.h> 135 #include <cam/scsi/scsi_all.h> 136 #include <cam/scsi/scsi_da.h> 137 138 #include <cam/cam_periph.h> 139 140 #ifdef USB_DEBUG 141 #define DIF(m, x) \ 142 do { \ 143 if (umass_debug & (m)) { x ; } \ 144 } while (0) 145 146 #define DPRINTF(sc, m, fmt, ...) \ 147 do { \ 148 if (umass_debug & (m)) { \ 149 printf("%s:%s: " fmt, \ 150 (sc) ? (const char *)(sc)->sc_name : \ 151 (const char *)"umassX", \ 152 __FUNCTION__ ,## __VA_ARGS__); \ 153 } \ 154 } while (0) 155 156 #define UDMASS_GEN 0x00010000 /* general */ 157 #define UDMASS_SCSI 0x00020000 /* scsi */ 158 #define UDMASS_UFI 0x00040000 /* ufi command set */ 159 #define UDMASS_ATAPI 0x00080000 /* 8070i command set */ 160 #define UDMASS_CMD (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI) 161 #define UDMASS_USB 0x00100000 /* USB general */ 162 #define UDMASS_BBB 0x00200000 /* Bulk-Only transfers */ 163 #define UDMASS_CBI 0x00400000 /* CBI transfers */ 164 #define UDMASS_WIRE (UDMASS_BBB|UDMASS_CBI) 165 #define UDMASS_ALL 0xffff0000 /* all of the above */ 166 static int umass_debug; 167 static int umass_throttle; 168 169 static SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW, 0, "USB umass"); 170 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RWTUN, 171 &umass_debug, 0, "umass debug level"); 172 SYSCTL_INT(_hw_usb_umass, OID_AUTO, throttle, CTLFLAG_RWTUN, 173 &umass_throttle, 0, "Forced delay between commands in milliseconds"); 174 #else 175 #define DIF(...) do { } while (0) 176 #define DPRINTF(...) do { } while (0) 177 #endif 178 179 #define UMASS_BULK_SIZE (1 << 17) 180 #define UMASS_CBI_DIAGNOSTIC_CMDLEN 12 /* bytes */ 181 #define UMASS_MAX_CMDLEN MAX(12, CAM_MAX_CDBLEN) /* bytes */ 182 183 /* USB transfer definitions */ 184 185 #define UMASS_T_BBB_RESET1 0 /* Bulk-Only */ 186 #define UMASS_T_BBB_RESET2 1 187 #define UMASS_T_BBB_RESET3 2 188 #define UMASS_T_BBB_COMMAND 3 189 #define UMASS_T_BBB_DATA_READ 4 190 #define UMASS_T_BBB_DATA_RD_CS 5 191 #define UMASS_T_BBB_DATA_WRITE 6 192 #define UMASS_T_BBB_DATA_WR_CS 7 193 #define UMASS_T_BBB_STATUS 8 194 #define UMASS_T_BBB_MAX 9 195 196 #define UMASS_T_CBI_RESET1 0 /* CBI */ 197 #define UMASS_T_CBI_RESET2 1 198 #define UMASS_T_CBI_RESET3 2 199 #define UMASS_T_CBI_COMMAND 3 200 #define UMASS_T_CBI_DATA_READ 4 201 #define UMASS_T_CBI_DATA_RD_CS 5 202 #define UMASS_T_CBI_DATA_WRITE 6 203 #define UMASS_T_CBI_DATA_WR_CS 7 204 #define UMASS_T_CBI_STATUS 8 205 #define UMASS_T_CBI_RESET4 9 206 #define UMASS_T_CBI_MAX 10 207 208 #define UMASS_T_MAX MAX(UMASS_T_CBI_MAX, UMASS_T_BBB_MAX) 209 210 /* Generic definitions */ 211 212 /* Direction for transfer */ 213 #define DIR_NONE 0 214 #define DIR_IN 1 215 #define DIR_OUT 2 216 217 /* device name */ 218 #define DEVNAME "umass" 219 #define DEVNAME_SIM "umass-sim" 220 221 /* Approximate maximum transfer speeds (assumes 33% overhead). */ 222 #define UMASS_FULL_TRANSFER_SPEED 1000 223 #define UMASS_HIGH_TRANSFER_SPEED 40000 224 #define UMASS_SUPER_TRANSFER_SPEED 400000 225 #define UMASS_FLOPPY_TRANSFER_SPEED 20 226 227 #define UMASS_TIMEOUT 5000 /* ms */ 228 229 /* CAM specific definitions */ 230 231 #define UMASS_SCSIID_MAX 1 /* maximum number of drives expected */ 232 #define UMASS_SCSIID_HOST UMASS_SCSIID_MAX 233 234 /* Bulk-Only features */ 235 236 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 237 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 238 239 /* Command Block Wrapper */ 240 typedef struct { 241 uDWord dCBWSignature; 242 #define CBWSIGNATURE 0x43425355 243 uDWord dCBWTag; 244 uDWord dCBWDataTransferLength; 245 uByte bCBWFlags; 246 #define CBWFLAGS_OUT 0x00 247 #define CBWFLAGS_IN 0x80 248 uByte bCBWLUN; 249 uByte bCDBLength; 250 #define CBWCDBLENGTH 16 251 uByte CBWCDB[CBWCDBLENGTH]; 252 } __packed umass_bbb_cbw_t; 253 254 #define UMASS_BBB_CBW_SIZE 31 255 256 /* Command Status Wrapper */ 257 typedef struct { 258 uDWord dCSWSignature; 259 #define CSWSIGNATURE 0x53425355 260 #define CSWSIGNATURE_IMAGINATION_DBX1 0x43425355 261 #define CSWSIGNATURE_OLYMPUS_C1 0x55425355 262 uDWord dCSWTag; 263 uDWord dCSWDataResidue; 264 uByte bCSWStatus; 265 #define CSWSTATUS_GOOD 0x0 266 #define CSWSTATUS_FAILED 0x1 267 #define CSWSTATUS_PHASE 0x2 268 } __packed umass_bbb_csw_t; 269 270 #define UMASS_BBB_CSW_SIZE 13 271 272 /* CBI features */ 273 274 #define UR_CBI_ADSC 0x00 275 276 typedef union { 277 struct { 278 uint8_t type; 279 #define IDB_TYPE_CCI 0x00 280 uint8_t value; 281 #define IDB_VALUE_PASS 0x00 282 #define IDB_VALUE_FAIL 0x01 283 #define IDB_VALUE_PHASE 0x02 284 #define IDB_VALUE_PERSISTENT 0x03 285 #define IDB_VALUE_STATUS_MASK 0x03 286 } __packed common; 287 288 struct { 289 uint8_t asc; 290 uint8_t ascq; 291 } __packed ufi; 292 } __packed umass_cbi_sbl_t; 293 294 struct umass_softc; /* see below */ 295 296 typedef void (umass_callback_t)(struct umass_softc *sc, union ccb *ccb, 297 uint32_t residue, uint8_t status); 298 299 #define STATUS_CMD_OK 0 /* everything ok */ 300 #define STATUS_CMD_UNKNOWN 1 /* will have to fetch sense */ 301 #define STATUS_CMD_FAILED 2 /* transfer was ok, command failed */ 302 #define STATUS_WIRE_FAILED 3 /* couldn't even get command across */ 303 304 typedef uint8_t (umass_transform_t)(struct umass_softc *sc, uint8_t *cmd_ptr, 305 uint8_t cmd_len); 306 307 /* Wire and command protocol */ 308 #define UMASS_PROTO_BBB 0x0001 /* USB wire protocol */ 309 #define UMASS_PROTO_CBI 0x0002 310 #define UMASS_PROTO_CBI_I 0x0004 311 #define UMASS_PROTO_WIRE 0x00ff /* USB wire protocol mask */ 312 #define UMASS_PROTO_SCSI 0x0100 /* command protocol */ 313 #define UMASS_PROTO_ATAPI 0x0200 314 #define UMASS_PROTO_UFI 0x0400 315 #define UMASS_PROTO_RBC 0x0800 316 #define UMASS_PROTO_COMMAND 0xff00 /* command protocol mask */ 317 318 /* Device specific quirks */ 319 #define NO_QUIRKS 0x0000 320 /* 321 * The drive does not support Test Unit Ready. Convert to Start Unit 322 */ 323 #define NO_TEST_UNIT_READY 0x0001 324 /* 325 * The drive does not reset the Unit Attention state after REQUEST 326 * SENSE has been sent. The INQUIRY command does not reset the UA 327 * either, and so CAM runs in circles trying to retrieve the initial 328 * INQUIRY data. 329 */ 330 #define RS_NO_CLEAR_UA 0x0002 331 /* The drive does not support START STOP. */ 332 #define NO_START_STOP 0x0004 333 /* Don't ask for full inquiry data (255b). */ 334 #define FORCE_SHORT_INQUIRY 0x0008 335 /* Needs to be initialised the Shuttle way */ 336 #define SHUTTLE_INIT 0x0010 337 /* Drive needs to be switched to alternate iface 1 */ 338 #define ALT_IFACE_1 0x0020 339 /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */ 340 #define FLOPPY_SPEED 0x0040 341 /* The device can't count and gets the residue of transfers wrong */ 342 #define IGNORE_RESIDUE 0x0080 343 /* No GetMaxLun call */ 344 #define NO_GETMAXLUN 0x0100 345 /* The device uses a weird CSWSIGNATURE. */ 346 #define WRONG_CSWSIG 0x0200 347 /* Device cannot handle INQUIRY so fake a generic response */ 348 #define NO_INQUIRY 0x0400 349 /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */ 350 #define NO_INQUIRY_EVPD 0x0800 351 /* Pad all RBC requests to 12 bytes. */ 352 #define RBC_PAD_TO_12 0x1000 353 /* 354 * Device reports number of sectors from READ_CAPACITY, not max 355 * sector number. 356 */ 357 #define READ_CAPACITY_OFFBY1 0x2000 358 /* 359 * Device cannot handle a SCSI synchronize cache command. Normally 360 * this quirk would be handled in the cam layer, but for IDE bridges 361 * we need to associate the quirk with the bridge and not the 362 * underlying disk device. This is handled by faking a success 363 * result. 364 */ 365 #define NO_SYNCHRONIZE_CACHE 0x4000 366 /* Device does not support 'PREVENT/ALLOW MEDIUM REMOVAL'. */ 367 #define NO_PREVENT_ALLOW 0x8000 368 369 struct umass_softc { 370 371 struct scsi_sense cam_scsi_sense; 372 struct scsi_test_unit_ready cam_scsi_test_unit_ready; 373 struct mtx sc_mtx; 374 struct { 375 uint8_t *data_ptr; 376 union ccb *ccb; 377 umass_callback_t *callback; 378 379 uint32_t data_len; /* bytes */ 380 uint32_t data_rem; /* bytes */ 381 uint32_t data_timeout; /* ms */ 382 uint32_t actlen; /* bytes */ 383 384 uint8_t cmd_data[UMASS_MAX_CMDLEN]; 385 uint8_t cmd_len; /* bytes */ 386 uint8_t dir; 387 uint8_t lun; 388 } sc_transfer; 389 390 /* Bulk specific variables for transfers in progress */ 391 umass_bbb_cbw_t cbw; /* command block wrapper */ 392 umass_bbb_csw_t csw; /* command status wrapper */ 393 394 /* CBI specific variables for transfers in progress */ 395 umass_cbi_sbl_t sbl; /* status block */ 396 397 device_t sc_dev; 398 struct usb_device *sc_udev; 399 struct cam_sim *sc_sim; /* SCSI Interface Module */ 400 struct usb_xfer *sc_xfer[UMASS_T_MAX]; 401 402 /* 403 * The command transform function is used to convert the SCSI 404 * commands into their derivatives, like UFI, ATAPI, and friends. 405 */ 406 umass_transform_t *sc_transform; 407 408 uint32_t sc_unit; 409 uint32_t sc_quirks; /* they got it almost right */ 410 uint32_t sc_proto; /* wire and cmd protocol */ 411 412 uint8_t sc_name[16]; 413 uint8_t sc_iface_no; /* interface number */ 414 uint8_t sc_maxlun; /* maximum LUN number, inclusive */ 415 uint8_t sc_last_xfer_index; 416 uint8_t sc_status_try; 417 }; 418 419 struct umass_probe_proto { 420 uint32_t quirks; 421 uint32_t proto; 422 423 int error; 424 }; 425 426 /* prototypes */ 427 428 static device_probe_t umass_probe; 429 static device_attach_t umass_attach; 430 static device_detach_t umass_detach; 431 432 static usb_callback_t umass_tr_error; 433 static usb_callback_t umass_t_bbb_reset1_callback; 434 static usb_callback_t umass_t_bbb_reset2_callback; 435 static usb_callback_t umass_t_bbb_reset3_callback; 436 static usb_callback_t umass_t_bbb_command_callback; 437 static usb_callback_t umass_t_bbb_data_read_callback; 438 static usb_callback_t umass_t_bbb_data_rd_cs_callback; 439 static usb_callback_t umass_t_bbb_data_write_callback; 440 static usb_callback_t umass_t_bbb_data_wr_cs_callback; 441 static usb_callback_t umass_t_bbb_status_callback; 442 static usb_callback_t umass_t_cbi_reset1_callback; 443 static usb_callback_t umass_t_cbi_reset2_callback; 444 static usb_callback_t umass_t_cbi_reset3_callback; 445 static usb_callback_t umass_t_cbi_reset4_callback; 446 static usb_callback_t umass_t_cbi_command_callback; 447 static usb_callback_t umass_t_cbi_data_read_callback; 448 static usb_callback_t umass_t_cbi_data_rd_cs_callback; 449 static usb_callback_t umass_t_cbi_data_write_callback; 450 static usb_callback_t umass_t_cbi_data_wr_cs_callback; 451 static usb_callback_t umass_t_cbi_status_callback; 452 453 static void umass_cancel_ccb(struct umass_softc *); 454 static void umass_init_shuttle(struct umass_softc *); 455 static void umass_reset(struct umass_softc *); 456 static void umass_t_bbb_data_clear_stall_callback(struct usb_xfer *, 457 uint8_t, uint8_t, usb_error_t); 458 static void umass_command_start(struct umass_softc *, uint8_t, void *, 459 uint32_t, uint32_t, umass_callback_t *, union ccb *); 460 static uint8_t umass_bbb_get_max_lun(struct umass_softc *); 461 static void umass_cbi_start_status(struct umass_softc *); 462 static void umass_t_cbi_data_clear_stall_callback(struct usb_xfer *, 463 uint8_t, uint8_t, usb_error_t); 464 static int umass_cam_attach_sim(struct umass_softc *); 465 static void umass_cam_attach(struct umass_softc *); 466 static void umass_cam_detach_sim(struct umass_softc *); 467 static void umass_cam_action(struct cam_sim *, union ccb *); 468 static void umass_cam_poll(struct cam_sim *); 469 static void umass_cam_cb(struct umass_softc *, union ccb *, uint32_t, 470 uint8_t); 471 static void umass_cam_sense_cb(struct umass_softc *, union ccb *, uint32_t, 472 uint8_t); 473 static void umass_cam_quirk_cb(struct umass_softc *, union ccb *, uint32_t, 474 uint8_t); 475 static uint8_t umass_scsi_transform(struct umass_softc *, uint8_t *, uint8_t); 476 static uint8_t umass_rbc_transform(struct umass_softc *, uint8_t *, uint8_t); 477 static uint8_t umass_ufi_transform(struct umass_softc *, uint8_t *, uint8_t); 478 static uint8_t umass_atapi_transform(struct umass_softc *, uint8_t *, 479 uint8_t); 480 static uint8_t umass_no_transform(struct umass_softc *, uint8_t *, uint8_t); 481 static uint8_t umass_std_transform(struct umass_softc *, union ccb *, uint8_t 482 *, uint8_t); 483 484 #ifdef USB_DEBUG 485 static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 486 static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 487 static void umass_cbi_dump_cmd(struct umass_softc *, void *, uint8_t); 488 static void umass_dump_buffer(struct umass_softc *, uint8_t *, uint32_t, 489 uint32_t); 490 #endif 491 492 static struct usb_config umass_bbb_config[UMASS_T_BBB_MAX] = { 493 494 [UMASS_T_BBB_RESET1] = { 495 .type = UE_CONTROL, 496 .endpoint = 0x00, /* Control pipe */ 497 .direction = UE_DIR_ANY, 498 .bufsize = sizeof(struct usb_device_request), 499 .callback = &umass_t_bbb_reset1_callback, 500 .timeout = 5000, /* 5 seconds */ 501 .interval = 500, /* 500 milliseconds */ 502 }, 503 504 [UMASS_T_BBB_RESET2] = { 505 .type = UE_CONTROL, 506 .endpoint = 0x00, /* Control pipe */ 507 .direction = UE_DIR_ANY, 508 .bufsize = sizeof(struct usb_device_request), 509 .callback = &umass_t_bbb_reset2_callback, 510 .timeout = 5000, /* 5 seconds */ 511 .interval = 50, /* 50 milliseconds */ 512 }, 513 514 [UMASS_T_BBB_RESET3] = { 515 .type = UE_CONTROL, 516 .endpoint = 0x00, /* Control pipe */ 517 .direction = UE_DIR_ANY, 518 .bufsize = sizeof(struct usb_device_request), 519 .callback = &umass_t_bbb_reset3_callback, 520 .timeout = 5000, /* 5 seconds */ 521 .interval = 50, /* 50 milliseconds */ 522 }, 523 524 [UMASS_T_BBB_COMMAND] = { 525 .type = UE_BULK, 526 .endpoint = UE_ADDR_ANY, 527 .direction = UE_DIR_OUT, 528 .bufsize = sizeof(umass_bbb_cbw_t), 529 .callback = &umass_t_bbb_command_callback, 530 .timeout = 5000, /* 5 seconds */ 531 }, 532 533 [UMASS_T_BBB_DATA_READ] = { 534 .type = UE_BULK, 535 .endpoint = UE_ADDR_ANY, 536 .direction = UE_DIR_IN, 537 .bufsize = UMASS_BULK_SIZE, 538 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 539 .callback = &umass_t_bbb_data_read_callback, 540 .timeout = 0, /* overwritten later */ 541 }, 542 543 [UMASS_T_BBB_DATA_RD_CS] = { 544 .type = UE_CONTROL, 545 .endpoint = 0x00, /* Control pipe */ 546 .direction = UE_DIR_ANY, 547 .bufsize = sizeof(struct usb_device_request), 548 .callback = &umass_t_bbb_data_rd_cs_callback, 549 .timeout = 5000, /* 5 seconds */ 550 }, 551 552 [UMASS_T_BBB_DATA_WRITE] = { 553 .type = UE_BULK, 554 .endpoint = UE_ADDR_ANY, 555 .direction = UE_DIR_OUT, 556 .bufsize = UMASS_BULK_SIZE, 557 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 558 .callback = &umass_t_bbb_data_write_callback, 559 .timeout = 0, /* overwritten later */ 560 }, 561 562 [UMASS_T_BBB_DATA_WR_CS] = { 563 .type = UE_CONTROL, 564 .endpoint = 0x00, /* Control pipe */ 565 .direction = UE_DIR_ANY, 566 .bufsize = sizeof(struct usb_device_request), 567 .callback = &umass_t_bbb_data_wr_cs_callback, 568 .timeout = 5000, /* 5 seconds */ 569 }, 570 571 [UMASS_T_BBB_STATUS] = { 572 .type = UE_BULK, 573 .endpoint = UE_ADDR_ANY, 574 .direction = UE_DIR_IN, 575 .bufsize = sizeof(umass_bbb_csw_t), 576 .flags = {.short_xfer_ok = 1,}, 577 .callback = &umass_t_bbb_status_callback, 578 .timeout = 5000, /* ms */ 579 }, 580 }; 581 582 static struct usb_config umass_cbi_config[UMASS_T_CBI_MAX] = { 583 584 [UMASS_T_CBI_RESET1] = { 585 .type = UE_CONTROL, 586 .endpoint = 0x00, /* Control pipe */ 587 .direction = UE_DIR_ANY, 588 .bufsize = (sizeof(struct usb_device_request) + 589 UMASS_CBI_DIAGNOSTIC_CMDLEN), 590 .callback = &umass_t_cbi_reset1_callback, 591 .timeout = 5000, /* 5 seconds */ 592 .interval = 500, /* 500 milliseconds */ 593 }, 594 595 [UMASS_T_CBI_RESET2] = { 596 .type = UE_CONTROL, 597 .endpoint = 0x00, /* Control pipe */ 598 .direction = UE_DIR_ANY, 599 .bufsize = sizeof(struct usb_device_request), 600 .callback = &umass_t_cbi_reset2_callback, 601 .timeout = 5000, /* 5 seconds */ 602 .interval = 50, /* 50 milliseconds */ 603 }, 604 605 [UMASS_T_CBI_RESET3] = { 606 .type = UE_CONTROL, 607 .endpoint = 0x00, /* Control pipe */ 608 .direction = UE_DIR_ANY, 609 .bufsize = sizeof(struct usb_device_request), 610 .callback = &umass_t_cbi_reset3_callback, 611 .timeout = 5000, /* 5 seconds */ 612 .interval = 50, /* 50 milliseconds */ 613 }, 614 615 [UMASS_T_CBI_COMMAND] = { 616 .type = UE_CONTROL, 617 .endpoint = 0x00, /* Control pipe */ 618 .direction = UE_DIR_ANY, 619 .bufsize = (sizeof(struct usb_device_request) + 620 UMASS_MAX_CMDLEN), 621 .callback = &umass_t_cbi_command_callback, 622 .timeout = 5000, /* 5 seconds */ 623 }, 624 625 [UMASS_T_CBI_DATA_READ] = { 626 .type = UE_BULK, 627 .endpoint = UE_ADDR_ANY, 628 .direction = UE_DIR_IN, 629 .bufsize = UMASS_BULK_SIZE, 630 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 631 .callback = &umass_t_cbi_data_read_callback, 632 .timeout = 0, /* overwritten later */ 633 }, 634 635 [UMASS_T_CBI_DATA_RD_CS] = { 636 .type = UE_CONTROL, 637 .endpoint = 0x00, /* Control pipe */ 638 .direction = UE_DIR_ANY, 639 .bufsize = sizeof(struct usb_device_request), 640 .callback = &umass_t_cbi_data_rd_cs_callback, 641 .timeout = 5000, /* 5 seconds */ 642 }, 643 644 [UMASS_T_CBI_DATA_WRITE] = { 645 .type = UE_BULK, 646 .endpoint = UE_ADDR_ANY, 647 .direction = UE_DIR_OUT, 648 .bufsize = UMASS_BULK_SIZE, 649 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 650 .callback = &umass_t_cbi_data_write_callback, 651 .timeout = 0, /* overwritten later */ 652 }, 653 654 [UMASS_T_CBI_DATA_WR_CS] = { 655 .type = UE_CONTROL, 656 .endpoint = 0x00, /* Control pipe */ 657 .direction = UE_DIR_ANY, 658 .bufsize = sizeof(struct usb_device_request), 659 .callback = &umass_t_cbi_data_wr_cs_callback, 660 .timeout = 5000, /* 5 seconds */ 661 }, 662 663 [UMASS_T_CBI_STATUS] = { 664 .type = UE_INTERRUPT, 665 .endpoint = UE_ADDR_ANY, 666 .direction = UE_DIR_IN, 667 .flags = {.short_xfer_ok = 1,.no_pipe_ok = 1,}, 668 .bufsize = sizeof(umass_cbi_sbl_t), 669 .callback = &umass_t_cbi_status_callback, 670 .timeout = 5000, /* ms */ 671 }, 672 673 [UMASS_T_CBI_RESET4] = { 674 .type = UE_CONTROL, 675 .endpoint = 0x00, /* Control pipe */ 676 .direction = UE_DIR_ANY, 677 .bufsize = sizeof(struct usb_device_request), 678 .callback = &umass_t_cbi_reset4_callback, 679 .timeout = 5000, /* ms */ 680 }, 681 }; 682 683 /* If device cannot return valid inquiry data, fake it */ 684 static const uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = { 685 0, /* removable */ 0x80, SCSI_REV_2, SCSI_REV_2, 686 /* additional_length */ 31, 0, 0, 0 687 }; 688 689 #define UFI_COMMAND_LENGTH 12 /* UFI commands are always 12 bytes */ 690 #define ATAPI_COMMAND_LENGTH 12 /* ATAPI commands are always 12 bytes */ 691 692 static devclass_t umass_devclass; 693 694 static device_method_t umass_methods[] = { 695 /* Device interface */ 696 DEVMETHOD(device_probe, umass_probe), 697 DEVMETHOD(device_attach, umass_attach), 698 DEVMETHOD(device_detach, umass_detach), 699 700 DEVMETHOD_END 701 }; 702 703 static driver_t umass_driver = { 704 .name = "umass", 705 .methods = umass_methods, 706 .size = sizeof(struct umass_softc), 707 }; 708 709 static const STRUCT_USB_HOST_ID __used umass_devs[] = { 710 /* generic mass storage class */ 711 {USB_IFACE_CLASS(UICLASS_MASS),}, 712 }; 713 714 DRIVER_MODULE(umass, uhub, umass_driver, umass_devclass, NULL, 0); 715 MODULE_DEPEND(umass, usb, 1, 1, 1); 716 MODULE_DEPEND(umass, cam, 1, 1, 1); 717 MODULE_VERSION(umass, 1); 718 USB_PNP_HOST_INFO(umass_devs); 719 720 /* 721 * USB device probe/attach/detach 722 */ 723 724 static uint16_t 725 umass_get_proto(struct usb_interface *iface) 726 { 727 struct usb_interface_descriptor *id; 728 uint16_t retval; 729 730 retval = 0; 731 732 /* Check for a standards compliant device */ 733 id = usbd_get_interface_descriptor(iface); 734 if ((id == NULL) || 735 (id->bInterfaceClass != UICLASS_MASS)) { 736 goto done; 737 } 738 switch (id->bInterfaceSubClass) { 739 case UISUBCLASS_SCSI: 740 retval |= UMASS_PROTO_SCSI; 741 break; 742 case UISUBCLASS_UFI: 743 retval |= UMASS_PROTO_UFI; 744 break; 745 case UISUBCLASS_RBC: 746 retval |= UMASS_PROTO_RBC; 747 break; 748 case UISUBCLASS_SFF8020I: 749 case UISUBCLASS_SFF8070I: 750 retval |= UMASS_PROTO_ATAPI; 751 break; 752 default: 753 goto done; 754 } 755 756 switch (id->bInterfaceProtocol) { 757 case UIPROTO_MASS_CBI: 758 retval |= UMASS_PROTO_CBI; 759 break; 760 case UIPROTO_MASS_CBI_I: 761 retval |= UMASS_PROTO_CBI_I; 762 break; 763 case UIPROTO_MASS_BBB_OLD: 764 case UIPROTO_MASS_BBB: 765 retval |= UMASS_PROTO_BBB; 766 break; 767 default: 768 goto done; 769 } 770 done: 771 return (retval); 772 } 773 774 /* 775 * Match the device we are seeing with the devices supported. 776 */ 777 static struct umass_probe_proto 778 umass_probe_proto(device_t dev, struct usb_attach_arg *uaa) 779 { 780 struct umass_probe_proto ret; 781 uint32_t quirks = NO_QUIRKS; 782 uint32_t proto = umass_get_proto(uaa->iface); 783 784 memset(&ret, 0, sizeof(ret)); 785 ret.error = BUS_PROBE_GENERIC; 786 787 /* Search for protocol enforcement */ 788 789 if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_BBB)) { 790 proto &= ~UMASS_PROTO_WIRE; 791 proto |= UMASS_PROTO_BBB; 792 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI)) { 793 proto &= ~UMASS_PROTO_WIRE; 794 proto |= UMASS_PROTO_CBI; 795 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI_I)) { 796 proto &= ~UMASS_PROTO_WIRE; 797 proto |= UMASS_PROTO_CBI_I; 798 } 799 800 if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_SCSI)) { 801 proto &= ~UMASS_PROTO_COMMAND; 802 proto |= UMASS_PROTO_SCSI; 803 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_ATAPI)) { 804 proto &= ~UMASS_PROTO_COMMAND; 805 proto |= UMASS_PROTO_ATAPI; 806 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_UFI)) { 807 proto &= ~UMASS_PROTO_COMMAND; 808 proto |= UMASS_PROTO_UFI; 809 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_RBC)) { 810 proto &= ~UMASS_PROTO_COMMAND; 811 proto |= UMASS_PROTO_RBC; 812 } 813 814 /* Check if the protocol is invalid */ 815 816 if ((proto & UMASS_PROTO_COMMAND) == 0) { 817 ret.error = ENXIO; 818 goto done; 819 } 820 821 if ((proto & UMASS_PROTO_WIRE) == 0) { 822 ret.error = ENXIO; 823 goto done; 824 } 825 826 /* Search for quirks */ 827 828 if (usb_test_quirk(uaa, UQ_MSC_NO_TEST_UNIT_READY)) 829 quirks |= NO_TEST_UNIT_READY; 830 if (usb_test_quirk(uaa, UQ_MSC_NO_RS_CLEAR_UA)) 831 quirks |= RS_NO_CLEAR_UA; 832 if (usb_test_quirk(uaa, UQ_MSC_NO_START_STOP)) 833 quirks |= NO_START_STOP; 834 if (usb_test_quirk(uaa, UQ_MSC_NO_GETMAXLUN)) 835 quirks |= NO_GETMAXLUN; 836 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY)) 837 quirks |= NO_INQUIRY; 838 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY_EVPD)) 839 quirks |= NO_INQUIRY_EVPD; 840 if (usb_test_quirk(uaa, UQ_MSC_NO_PREVENT_ALLOW)) 841 quirks |= NO_PREVENT_ALLOW; 842 if (usb_test_quirk(uaa, UQ_MSC_NO_SYNC_CACHE)) 843 quirks |= NO_SYNCHRONIZE_CACHE; 844 if (usb_test_quirk(uaa, UQ_MSC_SHUTTLE_INIT)) 845 quirks |= SHUTTLE_INIT; 846 if (usb_test_quirk(uaa, UQ_MSC_ALT_IFACE_1)) 847 quirks |= ALT_IFACE_1; 848 if (usb_test_quirk(uaa, UQ_MSC_FLOPPY_SPEED)) 849 quirks |= FLOPPY_SPEED; 850 if (usb_test_quirk(uaa, UQ_MSC_IGNORE_RESIDUE)) 851 quirks |= IGNORE_RESIDUE; 852 if (usb_test_quirk(uaa, UQ_MSC_WRONG_CSWSIG)) 853 quirks |= WRONG_CSWSIG; 854 if (usb_test_quirk(uaa, UQ_MSC_RBC_PAD_TO_12)) 855 quirks |= RBC_PAD_TO_12; 856 if (usb_test_quirk(uaa, UQ_MSC_READ_CAP_OFFBY1)) 857 quirks |= READ_CAPACITY_OFFBY1; 858 if (usb_test_quirk(uaa, UQ_MSC_FORCE_SHORT_INQ)) 859 quirks |= FORCE_SHORT_INQUIRY; 860 861 done: 862 ret.quirks = quirks; 863 ret.proto = proto; 864 return (ret); 865 } 866 867 static int 868 umass_probe(device_t dev) 869 { 870 struct usb_attach_arg *uaa = device_get_ivars(dev); 871 struct umass_probe_proto temp; 872 873 if (uaa->usb_mode != USB_MODE_HOST) { 874 return (ENXIO); 875 } 876 temp = umass_probe_proto(dev, uaa); 877 878 return (temp.error); 879 } 880 881 static int 882 umass_attach(device_t dev) 883 { 884 struct umass_softc *sc = device_get_softc(dev); 885 struct usb_attach_arg *uaa = device_get_ivars(dev); 886 struct umass_probe_proto temp = umass_probe_proto(dev, uaa); 887 struct usb_interface_descriptor *id; 888 int err; 889 890 /* 891 * NOTE: the softc struct is cleared in device_set_driver. 892 * We can safely call umass_detach without specifically 893 * initializing the struct. 894 */ 895 896 sc->sc_dev = dev; 897 sc->sc_udev = uaa->device; 898 sc->sc_proto = temp.proto; 899 sc->sc_quirks = temp.quirks; 900 sc->sc_unit = device_get_unit(dev); 901 902 snprintf(sc->sc_name, sizeof(sc->sc_name), 903 "%s", device_get_nameunit(dev)); 904 905 device_set_usb_desc(dev); 906 907 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), 908 NULL, MTX_DEF | MTX_RECURSE); 909 910 /* get interface index */ 911 912 id = usbd_get_interface_descriptor(uaa->iface); 913 if (id == NULL) { 914 device_printf(dev, "failed to get " 915 "interface number\n"); 916 goto detach; 917 } 918 sc->sc_iface_no = id->bInterfaceNumber; 919 920 #ifdef USB_DEBUG 921 device_printf(dev, " "); 922 923 switch (sc->sc_proto & UMASS_PROTO_COMMAND) { 924 case UMASS_PROTO_SCSI: 925 printf("SCSI"); 926 break; 927 case UMASS_PROTO_ATAPI: 928 printf("8070i (ATAPI)"); 929 break; 930 case UMASS_PROTO_UFI: 931 printf("UFI"); 932 break; 933 case UMASS_PROTO_RBC: 934 printf("RBC"); 935 break; 936 default: 937 printf("(unknown 0x%02x)", 938 sc->sc_proto & UMASS_PROTO_COMMAND); 939 break; 940 } 941 942 printf(" over "); 943 944 switch (sc->sc_proto & UMASS_PROTO_WIRE) { 945 case UMASS_PROTO_BBB: 946 printf("Bulk-Only"); 947 break; 948 case UMASS_PROTO_CBI: /* uses Comand/Bulk pipes */ 949 printf("CBI"); 950 break; 951 case UMASS_PROTO_CBI_I: /* uses Comand/Bulk/Interrupt pipes */ 952 printf("CBI with CCI"); 953 break; 954 default: 955 printf("(unknown 0x%02x)", 956 sc->sc_proto & UMASS_PROTO_WIRE); 957 } 958 959 printf("; quirks = 0x%04x\n", sc->sc_quirks); 960 #endif 961 962 if (sc->sc_quirks & ALT_IFACE_1) { 963 err = usbd_set_alt_interface_index 964 (uaa->device, uaa->info.bIfaceIndex, 1); 965 966 if (err) { 967 DPRINTF(sc, UDMASS_USB, "could not switch to " 968 "Alt Interface 1\n"); 969 goto detach; 970 } 971 } 972 /* allocate all required USB transfers */ 973 974 if (sc->sc_proto & UMASS_PROTO_BBB) { 975 976 err = usbd_transfer_setup(uaa->device, 977 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_bbb_config, 978 UMASS_T_BBB_MAX, sc, &sc->sc_mtx); 979 980 /* skip reset first time */ 981 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 982 983 } else if (sc->sc_proto & (UMASS_PROTO_CBI | UMASS_PROTO_CBI_I)) { 984 985 err = usbd_transfer_setup(uaa->device, 986 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_cbi_config, 987 UMASS_T_CBI_MAX, sc, &sc->sc_mtx); 988 989 /* skip reset first time */ 990 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 991 992 } else { 993 err = USB_ERR_INVAL; 994 } 995 996 if (err) { 997 device_printf(dev, "could not setup required " 998 "transfers, %s\n", usbd_errstr(err)); 999 goto detach; 1000 } 1001 #ifdef USB_DEBUG 1002 if (umass_throttle > 0) { 1003 uint8_t x; 1004 int iv; 1005 1006 iv = umass_throttle; 1007 1008 if (iv < 1) 1009 iv = 1; 1010 else if (iv > 8000) 1011 iv = 8000; 1012 1013 for (x = 0; x != UMASS_T_MAX; x++) { 1014 if (sc->sc_xfer[x] != NULL) 1015 usbd_xfer_set_interval(sc->sc_xfer[x], iv); 1016 } 1017 } 1018 #endif 1019 sc->sc_transform = 1020 (sc->sc_proto & UMASS_PROTO_SCSI) ? &umass_scsi_transform : 1021 (sc->sc_proto & UMASS_PROTO_UFI) ? &umass_ufi_transform : 1022 (sc->sc_proto & UMASS_PROTO_ATAPI) ? &umass_atapi_transform : 1023 (sc->sc_proto & UMASS_PROTO_RBC) ? &umass_rbc_transform : 1024 &umass_no_transform; 1025 1026 /* from here onwards the device can be used. */ 1027 1028 if (sc->sc_quirks & SHUTTLE_INIT) { 1029 umass_init_shuttle(sc); 1030 } 1031 /* get the maximum LUN supported by the device */ 1032 1033 if (((sc->sc_proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB) && 1034 !(sc->sc_quirks & NO_GETMAXLUN)) 1035 sc->sc_maxlun = umass_bbb_get_max_lun(sc); 1036 else 1037 sc->sc_maxlun = 0; 1038 1039 /* Prepare the SCSI command block */ 1040 sc->cam_scsi_sense.opcode = REQUEST_SENSE; 1041 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY; 1042 1043 /* register the SIM */ 1044 err = umass_cam_attach_sim(sc); 1045 if (err) { 1046 goto detach; 1047 } 1048 /* scan the SIM */ 1049 umass_cam_attach(sc); 1050 1051 DPRINTF(sc, UDMASS_GEN, "Attach finished\n"); 1052 1053 return (0); /* success */ 1054 1055 detach: 1056 umass_detach(dev); 1057 return (ENXIO); /* failure */ 1058 } 1059 1060 static int 1061 umass_detach(device_t dev) 1062 { 1063 struct umass_softc *sc = device_get_softc(dev); 1064 1065 DPRINTF(sc, UDMASS_USB, "\n"); 1066 1067 /* teardown our statemachine */ 1068 1069 usbd_transfer_unsetup(sc->sc_xfer, UMASS_T_MAX); 1070 1071 mtx_lock(&sc->sc_mtx); 1072 1073 /* cancel any leftover CCB's */ 1074 1075 umass_cancel_ccb(sc); 1076 1077 umass_cam_detach_sim(sc); 1078 1079 mtx_unlock(&sc->sc_mtx); 1080 1081 mtx_destroy(&sc->sc_mtx); 1082 1083 return (0); /* success */ 1084 } 1085 1086 static void 1087 umass_init_shuttle(struct umass_softc *sc) 1088 { 1089 struct usb_device_request req; 1090 usb_error_t err; 1091 uint8_t status[2] = {0, 0}; 1092 1093 /* 1094 * The Linux driver does this, but no one can tell us what the 1095 * command does. 1096 */ 1097 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1098 req.bRequest = 1; /* XXX unknown command */ 1099 USETW(req.wValue, 0); 1100 req.wIndex[0] = sc->sc_iface_no; 1101 req.wIndex[1] = 0; 1102 USETW(req.wLength, sizeof(status)); 1103 err = usbd_do_request(sc->sc_udev, NULL, &req, &status); 1104 1105 DPRINTF(sc, UDMASS_GEN, "Shuttle init returned 0x%02x%02x\n", 1106 status[0], status[1]); 1107 } 1108 1109 /* 1110 * Generic functions to handle transfers 1111 */ 1112 1113 static void 1114 umass_transfer_start(struct umass_softc *sc, uint8_t xfer_index) 1115 { 1116 DPRINTF(sc, UDMASS_GEN, "transfer index = " 1117 "%d\n", xfer_index); 1118 1119 if (sc->sc_xfer[xfer_index]) { 1120 sc->sc_last_xfer_index = xfer_index; 1121 usbd_transfer_start(sc->sc_xfer[xfer_index]); 1122 } else { 1123 umass_cancel_ccb(sc); 1124 } 1125 } 1126 1127 static void 1128 umass_reset(struct umass_softc *sc) 1129 { 1130 DPRINTF(sc, UDMASS_GEN, "resetting device\n"); 1131 1132 /* 1133 * stop the last transfer, if not already stopped: 1134 */ 1135 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 1136 umass_transfer_start(sc, 0); 1137 } 1138 1139 static void 1140 umass_cancel_ccb(struct umass_softc *sc) 1141 { 1142 union ccb *ccb; 1143 1144 mtx_assert(&sc->sc_mtx, MA_OWNED); 1145 1146 ccb = sc->sc_transfer.ccb; 1147 sc->sc_transfer.ccb = NULL; 1148 sc->sc_last_xfer_index = 0; 1149 1150 if (ccb) { 1151 (sc->sc_transfer.callback) 1152 (sc, ccb, (sc->sc_transfer.data_len - 1153 sc->sc_transfer.actlen), STATUS_WIRE_FAILED); 1154 } 1155 } 1156 1157 static void 1158 umass_tr_error(struct usb_xfer *xfer, usb_error_t error) 1159 { 1160 struct umass_softc *sc = usbd_xfer_softc(xfer); 1161 1162 if (error != USB_ERR_CANCELLED) { 1163 1164 DPRINTF(sc, UDMASS_GEN, "transfer error, %s -> " 1165 "reset\n", usbd_errstr(error)); 1166 } 1167 umass_cancel_ccb(sc); 1168 } 1169 1170 /* 1171 * BBB protocol specific functions 1172 */ 1173 1174 static void 1175 umass_t_bbb_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1176 { 1177 struct umass_softc *sc = usbd_xfer_softc(xfer); 1178 struct usb_device_request req; 1179 struct usb_page_cache *pc; 1180 1181 switch (USB_GET_STATE(xfer)) { 1182 case USB_ST_TRANSFERRED: 1183 umass_transfer_start(sc, UMASS_T_BBB_RESET2); 1184 return; 1185 1186 case USB_ST_SETUP: 1187 /* 1188 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1189 * 1190 * For Reset Recovery the host shall issue in the following order: 1191 * a) a Bulk-Only Mass Storage Reset 1192 * b) a Clear Feature HALT to the Bulk-In endpoint 1193 * c) a Clear Feature HALT to the Bulk-Out endpoint 1194 * 1195 * This is done in 3 steps, using 3 transfers: 1196 * UMASS_T_BBB_RESET1 1197 * UMASS_T_BBB_RESET2 1198 * UMASS_T_BBB_RESET3 1199 */ 1200 1201 DPRINTF(sc, UDMASS_BBB, "BBB reset!\n"); 1202 1203 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1204 req.bRequest = UR_BBB_RESET; /* bulk only reset */ 1205 USETW(req.wValue, 0); 1206 req.wIndex[0] = sc->sc_iface_no; 1207 req.wIndex[1] = 0; 1208 USETW(req.wLength, 0); 1209 1210 pc = usbd_xfer_get_frame(xfer, 0); 1211 usbd_copy_in(pc, 0, &req, sizeof(req)); 1212 1213 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1214 usbd_xfer_set_frames(xfer, 1); 1215 usbd_transfer_submit(xfer); 1216 return; 1217 1218 default: /* Error */ 1219 umass_tr_error(xfer, error); 1220 return; 1221 } 1222 } 1223 1224 static void 1225 umass_t_bbb_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1226 { 1227 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_RESET3, 1228 UMASS_T_BBB_DATA_READ, error); 1229 } 1230 1231 static void 1232 umass_t_bbb_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1233 { 1234 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_COMMAND, 1235 UMASS_T_BBB_DATA_WRITE, error); 1236 } 1237 1238 static void 1239 umass_t_bbb_data_clear_stall_callback(struct usb_xfer *xfer, 1240 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1241 { 1242 struct umass_softc *sc = usbd_xfer_softc(xfer); 1243 1244 switch (USB_GET_STATE(xfer)) { 1245 case USB_ST_TRANSFERRED: 1246 tr_transferred: 1247 umass_transfer_start(sc, next_xfer); 1248 return; 1249 1250 case USB_ST_SETUP: 1251 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1252 goto tr_transferred; 1253 } 1254 return; 1255 1256 default: /* Error */ 1257 umass_tr_error(xfer, error); 1258 return; 1259 } 1260 } 1261 1262 static void 1263 umass_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 1264 { 1265 struct umass_softc *sc = usbd_xfer_softc(xfer); 1266 union ccb *ccb = sc->sc_transfer.ccb; 1267 struct usb_page_cache *pc; 1268 uint32_t tag; 1269 1270 switch (USB_GET_STATE(xfer)) { 1271 case USB_ST_TRANSFERRED: 1272 umass_transfer_start 1273 (sc, ((sc->sc_transfer.dir == DIR_IN) ? UMASS_T_BBB_DATA_READ : 1274 (sc->sc_transfer.dir == DIR_OUT) ? UMASS_T_BBB_DATA_WRITE : 1275 UMASS_T_BBB_STATUS)); 1276 return; 1277 1278 case USB_ST_SETUP: 1279 1280 sc->sc_status_try = 0; 1281 1282 if (ccb) { 1283 1284 /* 1285 * the initial value is not important, 1286 * as long as the values are unique: 1287 */ 1288 tag = UGETDW(sc->cbw.dCBWTag) + 1; 1289 1290 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1291 USETDW(sc->cbw.dCBWTag, tag); 1292 1293 /* 1294 * dCBWDataTransferLength: 1295 * This field indicates the number of bytes of data that the host 1296 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1297 * the Direction bit) during the execution of this command. If this 1298 * field is set to 0, the device will expect that no data will be 1299 * transferred IN or OUT during this command, regardless of the value 1300 * of the Direction bit defined in dCBWFlags. 1301 */ 1302 USETDW(sc->cbw.dCBWDataTransferLength, sc->sc_transfer.data_len); 1303 1304 /* 1305 * dCBWFlags: 1306 * The bits of the Flags field are defined as follows: 1307 * Bits 0-6 reserved 1308 * Bit 7 Direction - this bit shall be ignored if the 1309 * dCBWDataTransferLength field is zero. 1310 * 0 = data Out from host to device 1311 * 1 = data In from device to host 1312 */ 1313 sc->cbw.bCBWFlags = ((sc->sc_transfer.dir == DIR_IN) ? 1314 CBWFLAGS_IN : CBWFLAGS_OUT); 1315 sc->cbw.bCBWLUN = sc->sc_transfer.lun; 1316 1317 if (sc->sc_transfer.cmd_len > sizeof(sc->cbw.CBWCDB)) { 1318 sc->sc_transfer.cmd_len = sizeof(sc->cbw.CBWCDB); 1319 DPRINTF(sc, UDMASS_BBB, "Truncating long command!\n"); 1320 } 1321 sc->cbw.bCDBLength = sc->sc_transfer.cmd_len; 1322 1323 /* copy SCSI command data */ 1324 memcpy(sc->cbw.CBWCDB, sc->sc_transfer.cmd_data, 1325 sc->sc_transfer.cmd_len); 1326 1327 /* clear remaining command area */ 1328 memset(sc->cbw.CBWCDB + 1329 sc->sc_transfer.cmd_len, 0, 1330 sizeof(sc->cbw.CBWCDB) - 1331 sc->sc_transfer.cmd_len); 1332 1333 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1334 1335 pc = usbd_xfer_get_frame(xfer, 0); 1336 usbd_copy_in(pc, 0, &sc->cbw, sizeof(sc->cbw)); 1337 usbd_xfer_set_frame_len(xfer, 0, sizeof(sc->cbw)); 1338 1339 usbd_transfer_submit(xfer); 1340 } 1341 return; 1342 1343 default: /* Error */ 1344 umass_tr_error(xfer, error); 1345 return; 1346 } 1347 } 1348 1349 static void 1350 umass_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1351 { 1352 struct umass_softc *sc = usbd_xfer_softc(xfer); 1353 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1354 int actlen, sumlen; 1355 1356 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1357 1358 switch (USB_GET_STATE(xfer)) { 1359 case USB_ST_TRANSFERRED: 1360 sc->sc_transfer.data_rem -= actlen; 1361 sc->sc_transfer.data_ptr += actlen; 1362 sc->sc_transfer.actlen += actlen; 1363 1364 if (actlen < sumlen) { 1365 /* short transfer */ 1366 sc->sc_transfer.data_rem = 0; 1367 } 1368 case USB_ST_SETUP: 1369 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1370 max_bulk, sc->sc_transfer.data_rem); 1371 1372 if (sc->sc_transfer.data_rem == 0) { 1373 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1374 return; 1375 } 1376 if (max_bulk > sc->sc_transfer.data_rem) { 1377 max_bulk = sc->sc_transfer.data_rem; 1378 } 1379 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1380 1381 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1382 max_bulk); 1383 1384 usbd_transfer_submit(xfer); 1385 return; 1386 1387 default: /* Error */ 1388 if (error == USB_ERR_CANCELLED) { 1389 umass_tr_error(xfer, error); 1390 } else { 1391 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1392 } 1393 return; 1394 } 1395 } 1396 1397 static void 1398 umass_t_bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1399 { 1400 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1401 UMASS_T_BBB_DATA_READ, error); 1402 } 1403 1404 static void 1405 umass_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1406 { 1407 struct umass_softc *sc = usbd_xfer_softc(xfer); 1408 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1409 int actlen, sumlen; 1410 1411 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1412 1413 switch (USB_GET_STATE(xfer)) { 1414 case USB_ST_TRANSFERRED: 1415 sc->sc_transfer.data_rem -= actlen; 1416 sc->sc_transfer.data_ptr += actlen; 1417 sc->sc_transfer.actlen += actlen; 1418 1419 if (actlen < sumlen) { 1420 /* short transfer */ 1421 sc->sc_transfer.data_rem = 0; 1422 } 1423 case USB_ST_SETUP: 1424 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1425 max_bulk, sc->sc_transfer.data_rem); 1426 1427 if (sc->sc_transfer.data_rem == 0) { 1428 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1429 return; 1430 } 1431 if (max_bulk > sc->sc_transfer.data_rem) { 1432 max_bulk = sc->sc_transfer.data_rem; 1433 } 1434 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1435 1436 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1437 max_bulk); 1438 1439 usbd_transfer_submit(xfer); 1440 return; 1441 1442 default: /* Error */ 1443 if (error == USB_ERR_CANCELLED) { 1444 umass_tr_error(xfer, error); 1445 } else { 1446 umass_transfer_start(sc, UMASS_T_BBB_DATA_WR_CS); 1447 } 1448 return; 1449 } 1450 } 1451 1452 static void 1453 umass_t_bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1454 { 1455 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1456 UMASS_T_BBB_DATA_WRITE, error); 1457 } 1458 1459 static void 1460 umass_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 1461 { 1462 struct umass_softc *sc = usbd_xfer_softc(xfer); 1463 union ccb *ccb = sc->sc_transfer.ccb; 1464 struct usb_page_cache *pc; 1465 uint32_t residue; 1466 int actlen; 1467 1468 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1469 1470 switch (USB_GET_STATE(xfer)) { 1471 case USB_ST_TRANSFERRED: 1472 1473 /* 1474 * Do a full reset if there is something wrong with the CSW: 1475 */ 1476 sc->sc_status_try = 1; 1477 1478 /* Zero missing parts of the CSW: */ 1479 1480 if (actlen < (int)sizeof(sc->csw)) 1481 memset(&sc->csw, 0, sizeof(sc->csw)); 1482 1483 pc = usbd_xfer_get_frame(xfer, 0); 1484 usbd_copy_out(pc, 0, &sc->csw, actlen); 1485 1486 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1487 1488 residue = UGETDW(sc->csw.dCSWDataResidue); 1489 1490 if ((!residue) || (sc->sc_quirks & IGNORE_RESIDUE)) { 1491 residue = (sc->sc_transfer.data_len - 1492 sc->sc_transfer.actlen); 1493 } 1494 if (residue > sc->sc_transfer.data_len) { 1495 DPRINTF(sc, UDMASS_BBB, "truncating residue from %d " 1496 "to %d bytes\n", residue, sc->sc_transfer.data_len); 1497 residue = sc->sc_transfer.data_len; 1498 } 1499 /* translate weird command-status signatures: */ 1500 if (sc->sc_quirks & WRONG_CSWSIG) { 1501 1502 uint32_t temp = UGETDW(sc->csw.dCSWSignature); 1503 1504 if ((temp == CSWSIGNATURE_OLYMPUS_C1) || 1505 (temp == CSWSIGNATURE_IMAGINATION_DBX1)) { 1506 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1507 } 1508 } 1509 /* check CSW and handle eventual error */ 1510 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1511 DPRINTF(sc, UDMASS_BBB, "bad CSW signature 0x%08x != 0x%08x\n", 1512 UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); 1513 /* 1514 * Invalid CSW: Wrong signature or wrong tag might 1515 * indicate that we lost synchronization. Reset the 1516 * device. 1517 */ 1518 goto tr_error; 1519 } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { 1520 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: tag 0x%08x should be " 1521 "0x%08x\n", UGETDW(sc->csw.dCSWTag), 1522 UGETDW(sc->cbw.dCBWTag)); 1523 goto tr_error; 1524 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1525 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: status %d > %d\n", 1526 sc->csw.bCSWStatus, CSWSTATUS_PHASE); 1527 goto tr_error; 1528 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1529 DPRINTF(sc, UDMASS_BBB, "Phase error, residue = " 1530 "%d\n", residue); 1531 goto tr_error; 1532 } else if (sc->sc_transfer.actlen > sc->sc_transfer.data_len) { 1533 DPRINTF(sc, UDMASS_BBB, "Buffer overrun %d > %d\n", 1534 sc->sc_transfer.actlen, sc->sc_transfer.data_len); 1535 goto tr_error; 1536 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1537 DPRINTF(sc, UDMASS_BBB, "Command failed, residue = " 1538 "%d\n", residue); 1539 1540 sc->sc_transfer.ccb = NULL; 1541 1542 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1543 1544 (sc->sc_transfer.callback) 1545 (sc, ccb, residue, STATUS_CMD_FAILED); 1546 } else { 1547 sc->sc_transfer.ccb = NULL; 1548 1549 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1550 1551 (sc->sc_transfer.callback) 1552 (sc, ccb, residue, STATUS_CMD_OK); 1553 } 1554 return; 1555 1556 case USB_ST_SETUP: 1557 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 1558 usbd_transfer_submit(xfer); 1559 return; 1560 1561 default: 1562 tr_error: 1563 DPRINTF(sc, UDMASS_BBB, "Failed to read CSW: %s, try %d\n", 1564 usbd_errstr(error), sc->sc_status_try); 1565 1566 if ((error == USB_ERR_CANCELLED) || 1567 (sc->sc_status_try)) { 1568 umass_tr_error(xfer, error); 1569 } else { 1570 sc->sc_status_try = 1; 1571 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1572 } 1573 return; 1574 } 1575 } 1576 1577 static void 1578 umass_command_start(struct umass_softc *sc, uint8_t dir, 1579 void *data_ptr, uint32_t data_len, 1580 uint32_t data_timeout, umass_callback_t *callback, 1581 union ccb *ccb) 1582 { 1583 sc->sc_transfer.lun = ccb->ccb_h.target_lun; 1584 1585 /* 1586 * NOTE: assumes that "sc->sc_transfer.cmd_data" and 1587 * "sc->sc_transfer.cmd_len" has been properly 1588 * initialized. 1589 */ 1590 1591 sc->sc_transfer.dir = data_len ? dir : DIR_NONE; 1592 sc->sc_transfer.data_ptr = data_ptr; 1593 sc->sc_transfer.data_len = data_len; 1594 sc->sc_transfer.data_rem = data_len; 1595 sc->sc_transfer.data_timeout = (data_timeout + UMASS_TIMEOUT); 1596 1597 sc->sc_transfer.actlen = 0; 1598 sc->sc_transfer.callback = callback; 1599 sc->sc_transfer.ccb = ccb; 1600 1601 if (sc->sc_xfer[sc->sc_last_xfer_index]) { 1602 usbd_transfer_start(sc->sc_xfer[sc->sc_last_xfer_index]); 1603 } else { 1604 umass_cancel_ccb(sc); 1605 } 1606 } 1607 1608 static uint8_t 1609 umass_bbb_get_max_lun(struct umass_softc *sc) 1610 { 1611 struct usb_device_request req; 1612 usb_error_t err; 1613 uint8_t buf = 0; 1614 1615 /* The Get Max Lun command is a class-specific request. */ 1616 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1617 req.bRequest = UR_BBB_GET_MAX_LUN; 1618 USETW(req.wValue, 0); 1619 req.wIndex[0] = sc->sc_iface_no; 1620 req.wIndex[1] = 0; 1621 USETW(req.wLength, 1); 1622 1623 err = usbd_do_request(sc->sc_udev, NULL, &req, &buf); 1624 if (err) { 1625 buf = 0; 1626 1627 /* Device doesn't support Get Max Lun request. */ 1628 printf("%s: Get Max Lun not supported (%s)\n", 1629 sc->sc_name, usbd_errstr(err)); 1630 } 1631 return (buf); 1632 } 1633 1634 /* 1635 * Command/Bulk/Interrupt (CBI) specific functions 1636 */ 1637 1638 static void 1639 umass_cbi_start_status(struct umass_softc *sc) 1640 { 1641 if (sc->sc_xfer[UMASS_T_CBI_STATUS]) { 1642 umass_transfer_start(sc, UMASS_T_CBI_STATUS); 1643 } else { 1644 union ccb *ccb = sc->sc_transfer.ccb; 1645 1646 sc->sc_transfer.ccb = NULL; 1647 1648 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1649 1650 (sc->sc_transfer.callback) 1651 (sc, ccb, (sc->sc_transfer.data_len - 1652 sc->sc_transfer.actlen), STATUS_CMD_UNKNOWN); 1653 } 1654 } 1655 1656 static void 1657 umass_t_cbi_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1658 { 1659 struct umass_softc *sc = usbd_xfer_softc(xfer); 1660 struct usb_device_request req; 1661 struct usb_page_cache *pc; 1662 uint8_t buf[UMASS_CBI_DIAGNOSTIC_CMDLEN]; 1663 1664 uint8_t i; 1665 1666 switch (USB_GET_STATE(xfer)) { 1667 case USB_ST_TRANSFERRED: 1668 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1669 break; 1670 1671 case USB_ST_SETUP: 1672 /* 1673 * Command Block Reset Protocol 1674 * 1675 * First send a reset request to the device. Then clear 1676 * any possibly stalled bulk endpoints. 1677 * 1678 * This is done in 3 steps, using 3 transfers: 1679 * UMASS_T_CBI_RESET1 1680 * UMASS_T_CBI_RESET2 1681 * UMASS_T_CBI_RESET3 1682 * UMASS_T_CBI_RESET4 (only if there is an interrupt endpoint) 1683 */ 1684 1685 DPRINTF(sc, UDMASS_CBI, "CBI reset!\n"); 1686 1687 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1688 req.bRequest = UR_CBI_ADSC; 1689 USETW(req.wValue, 0); 1690 req.wIndex[0] = sc->sc_iface_no; 1691 req.wIndex[1] = 0; 1692 USETW(req.wLength, UMASS_CBI_DIAGNOSTIC_CMDLEN); 1693 1694 /* 1695 * The 0x1d code is the SEND DIAGNOSTIC command. To 1696 * distinguish between the two, the last 10 bytes of the CBL 1697 * is filled with 0xff (section 2.2 of the CBI 1698 * specification) 1699 */ 1700 buf[0] = 0x1d; /* Command Block Reset */ 1701 buf[1] = 0x04; 1702 1703 for (i = 2; i < UMASS_CBI_DIAGNOSTIC_CMDLEN; i++) { 1704 buf[i] = 0xff; 1705 } 1706 1707 pc = usbd_xfer_get_frame(xfer, 0); 1708 usbd_copy_in(pc, 0, &req, sizeof(req)); 1709 pc = usbd_xfer_get_frame(xfer, 1); 1710 usbd_copy_in(pc, 0, buf, sizeof(buf)); 1711 1712 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1713 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); 1714 usbd_xfer_set_frames(xfer, 2); 1715 usbd_transfer_submit(xfer); 1716 break; 1717 1718 default: /* Error */ 1719 if (error == USB_ERR_CANCELLED) 1720 umass_tr_error(xfer, error); 1721 else 1722 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1723 break; 1724 } 1725 } 1726 1727 static void 1728 umass_t_cbi_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1729 { 1730 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_RESET3, 1731 UMASS_T_CBI_DATA_READ, error); 1732 } 1733 1734 static void 1735 umass_t_cbi_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1736 { 1737 struct umass_softc *sc = usbd_xfer_softc(xfer); 1738 1739 umass_t_cbi_data_clear_stall_callback 1740 (xfer, (sc->sc_xfer[UMASS_T_CBI_RESET4] && 1741 sc->sc_xfer[UMASS_T_CBI_STATUS]) ? 1742 UMASS_T_CBI_RESET4 : UMASS_T_CBI_COMMAND, 1743 UMASS_T_CBI_DATA_WRITE, error); 1744 } 1745 1746 static void 1747 umass_t_cbi_reset4_callback(struct usb_xfer *xfer, usb_error_t error) 1748 { 1749 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_COMMAND, 1750 UMASS_T_CBI_STATUS, error); 1751 } 1752 1753 static void 1754 umass_t_cbi_data_clear_stall_callback(struct usb_xfer *xfer, 1755 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1756 { 1757 struct umass_softc *sc = usbd_xfer_softc(xfer); 1758 1759 switch (USB_GET_STATE(xfer)) { 1760 case USB_ST_TRANSFERRED: 1761 tr_transferred: 1762 if (next_xfer == UMASS_T_CBI_STATUS) { 1763 umass_cbi_start_status(sc); 1764 } else { 1765 umass_transfer_start(sc, next_xfer); 1766 } 1767 break; 1768 1769 case USB_ST_SETUP: 1770 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1771 goto tr_transferred; /* should not happen */ 1772 } 1773 break; 1774 1775 default: /* Error */ 1776 umass_tr_error(xfer, error); 1777 break; 1778 } 1779 } 1780 1781 static void 1782 umass_t_cbi_command_callback(struct usb_xfer *xfer, usb_error_t error) 1783 { 1784 struct umass_softc *sc = usbd_xfer_softc(xfer); 1785 union ccb *ccb = sc->sc_transfer.ccb; 1786 struct usb_device_request req; 1787 struct usb_page_cache *pc; 1788 1789 switch (USB_GET_STATE(xfer)) { 1790 case USB_ST_TRANSFERRED: 1791 1792 if (sc->sc_transfer.dir == DIR_NONE) { 1793 umass_cbi_start_status(sc); 1794 } else { 1795 umass_transfer_start 1796 (sc, (sc->sc_transfer.dir == DIR_IN) ? 1797 UMASS_T_CBI_DATA_READ : UMASS_T_CBI_DATA_WRITE); 1798 } 1799 break; 1800 1801 case USB_ST_SETUP: 1802 1803 if (ccb) { 1804 1805 /* 1806 * do a CBI transfer with cmd_len bytes from 1807 * cmd_data, possibly a data phase of data_len 1808 * bytes from/to the device and finally a status 1809 * read phase. 1810 */ 1811 1812 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1813 req.bRequest = UR_CBI_ADSC; 1814 USETW(req.wValue, 0); 1815 req.wIndex[0] = sc->sc_iface_no; 1816 req.wIndex[1] = 0; 1817 req.wLength[0] = sc->sc_transfer.cmd_len; 1818 req.wLength[1] = 0; 1819 1820 pc = usbd_xfer_get_frame(xfer, 0); 1821 usbd_copy_in(pc, 0, &req, sizeof(req)); 1822 pc = usbd_xfer_get_frame(xfer, 1); 1823 usbd_copy_in(pc, 0, sc->sc_transfer.cmd_data, 1824 sc->sc_transfer.cmd_len); 1825 1826 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1827 usbd_xfer_set_frame_len(xfer, 1, sc->sc_transfer.cmd_len); 1828 usbd_xfer_set_frames(xfer, 1829 sc->sc_transfer.cmd_len ? 2 : 1); 1830 1831 DIF(UDMASS_CBI, 1832 umass_cbi_dump_cmd(sc, 1833 sc->sc_transfer.cmd_data, 1834 sc->sc_transfer.cmd_len)); 1835 1836 usbd_transfer_submit(xfer); 1837 } 1838 break; 1839 1840 default: /* Error */ 1841 /* 1842 * STALL on the control pipe can be result of the command error. 1843 * Attempt to clear this STALL same as for bulk pipe also 1844 * results in command completion interrupt, but ASC/ASCQ there 1845 * look like not always valid, so don't bother about it. 1846 */ 1847 if ((error == USB_ERR_STALLED) || 1848 (sc->sc_transfer.callback == &umass_cam_cb)) { 1849 sc->sc_transfer.ccb = NULL; 1850 (sc->sc_transfer.callback) 1851 (sc, ccb, sc->sc_transfer.data_len, 1852 STATUS_CMD_UNKNOWN); 1853 } else { 1854 umass_tr_error(xfer, error); 1855 /* skip reset */ 1856 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1857 } 1858 break; 1859 } 1860 } 1861 1862 static void 1863 umass_t_cbi_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1864 { 1865 struct umass_softc *sc = usbd_xfer_softc(xfer); 1866 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1867 int actlen, sumlen; 1868 1869 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1870 1871 switch (USB_GET_STATE(xfer)) { 1872 case USB_ST_TRANSFERRED: 1873 sc->sc_transfer.data_rem -= actlen; 1874 sc->sc_transfer.data_ptr += actlen; 1875 sc->sc_transfer.actlen += actlen; 1876 1877 if (actlen < sumlen) { 1878 /* short transfer */ 1879 sc->sc_transfer.data_rem = 0; 1880 } 1881 case USB_ST_SETUP: 1882 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1883 max_bulk, sc->sc_transfer.data_rem); 1884 1885 if (sc->sc_transfer.data_rem == 0) { 1886 umass_cbi_start_status(sc); 1887 break; 1888 } 1889 if (max_bulk > sc->sc_transfer.data_rem) { 1890 max_bulk = sc->sc_transfer.data_rem; 1891 } 1892 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1893 1894 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1895 max_bulk); 1896 1897 usbd_transfer_submit(xfer); 1898 break; 1899 1900 default: /* Error */ 1901 if ((error == USB_ERR_CANCELLED) || 1902 (sc->sc_transfer.callback != &umass_cam_cb)) { 1903 umass_tr_error(xfer, error); 1904 } else { 1905 umass_transfer_start(sc, UMASS_T_CBI_DATA_RD_CS); 1906 } 1907 break; 1908 } 1909 } 1910 1911 static void 1912 umass_t_cbi_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1913 { 1914 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1915 UMASS_T_CBI_DATA_READ, error); 1916 } 1917 1918 static void 1919 umass_t_cbi_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1920 { 1921 struct umass_softc *sc = usbd_xfer_softc(xfer); 1922 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1923 int actlen, sumlen; 1924 1925 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1926 1927 switch (USB_GET_STATE(xfer)) { 1928 case USB_ST_TRANSFERRED: 1929 sc->sc_transfer.data_rem -= actlen; 1930 sc->sc_transfer.data_ptr += actlen; 1931 sc->sc_transfer.actlen += actlen; 1932 1933 if (actlen < sumlen) { 1934 /* short transfer */ 1935 sc->sc_transfer.data_rem = 0; 1936 } 1937 case USB_ST_SETUP: 1938 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1939 max_bulk, sc->sc_transfer.data_rem); 1940 1941 if (sc->sc_transfer.data_rem == 0) { 1942 umass_cbi_start_status(sc); 1943 break; 1944 } 1945 if (max_bulk > sc->sc_transfer.data_rem) { 1946 max_bulk = sc->sc_transfer.data_rem; 1947 } 1948 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1949 1950 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1951 max_bulk); 1952 1953 usbd_transfer_submit(xfer); 1954 break; 1955 1956 default: /* Error */ 1957 if ((error == USB_ERR_CANCELLED) || 1958 (sc->sc_transfer.callback != &umass_cam_cb)) { 1959 umass_tr_error(xfer, error); 1960 } else { 1961 umass_transfer_start(sc, UMASS_T_CBI_DATA_WR_CS); 1962 } 1963 break; 1964 } 1965 } 1966 1967 static void 1968 umass_t_cbi_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1969 { 1970 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1971 UMASS_T_CBI_DATA_WRITE, error); 1972 } 1973 1974 static void 1975 umass_t_cbi_status_callback(struct usb_xfer *xfer, usb_error_t error) 1976 { 1977 struct umass_softc *sc = usbd_xfer_softc(xfer); 1978 union ccb *ccb = sc->sc_transfer.ccb; 1979 struct usb_page_cache *pc; 1980 uint32_t residue; 1981 uint8_t status; 1982 int actlen; 1983 1984 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1985 1986 switch (USB_GET_STATE(xfer)) { 1987 case USB_ST_TRANSFERRED: 1988 1989 if (actlen < (int)sizeof(sc->sbl)) { 1990 goto tr_setup; 1991 } 1992 pc = usbd_xfer_get_frame(xfer, 0); 1993 usbd_copy_out(pc, 0, &sc->sbl, sizeof(sc->sbl)); 1994 1995 residue = (sc->sc_transfer.data_len - 1996 sc->sc_transfer.actlen); 1997 1998 /* dissect the information in the buffer */ 1999 2000 if (sc->sc_proto & UMASS_PROTO_UFI) { 2001 2002 /* 2003 * Section 3.4.3.1.3 specifies that the UFI command 2004 * protocol returns an ASC and ASCQ in the interrupt 2005 * data block. 2006 */ 2007 2008 DPRINTF(sc, UDMASS_CBI, "UFI CCI, ASC = 0x%02x, " 2009 "ASCQ = 0x%02x\n", sc->sbl.ufi.asc, 2010 sc->sbl.ufi.ascq); 2011 2012 status = (((sc->sbl.ufi.asc == 0) && 2013 (sc->sbl.ufi.ascq == 0)) ? 2014 STATUS_CMD_OK : STATUS_CMD_FAILED); 2015 2016 sc->sc_transfer.ccb = NULL; 2017 2018 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2019 2020 (sc->sc_transfer.callback) 2021 (sc, ccb, residue, status); 2022 2023 break; 2024 2025 } else { 2026 2027 /* Command Interrupt Data Block */ 2028 2029 DPRINTF(sc, UDMASS_CBI, "type=0x%02x, value=0x%02x\n", 2030 sc->sbl.common.type, sc->sbl.common.value); 2031 2032 if (sc->sbl.common.type == IDB_TYPE_CCI) { 2033 2034 status = (sc->sbl.common.value & IDB_VALUE_STATUS_MASK); 2035 2036 status = ((status == IDB_VALUE_PASS) ? STATUS_CMD_OK : 2037 (status == IDB_VALUE_FAIL) ? STATUS_CMD_FAILED : 2038 (status == IDB_VALUE_PERSISTENT) ? STATUS_CMD_FAILED : 2039 STATUS_WIRE_FAILED); 2040 2041 sc->sc_transfer.ccb = NULL; 2042 2043 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2044 2045 (sc->sc_transfer.callback) 2046 (sc, ccb, residue, status); 2047 2048 break; 2049 } 2050 } 2051 2052 /* fallthrough */ 2053 2054 case USB_ST_SETUP: 2055 tr_setup: 2056 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 2057 usbd_transfer_submit(xfer); 2058 break; 2059 2060 default: /* Error */ 2061 DPRINTF(sc, UDMASS_CBI, "Failed to read CSW: %s\n", 2062 usbd_errstr(error)); 2063 umass_tr_error(xfer, error); 2064 break; 2065 } 2066 } 2067 2068 /* 2069 * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI)) 2070 */ 2071 2072 static int 2073 umass_cam_attach_sim(struct umass_softc *sc) 2074 { 2075 struct cam_devq *devq; /* Per device Queue */ 2076 2077 /* 2078 * A HBA is attached to the CAM layer. 2079 * 2080 * The CAM layer will then after a while start probing for devices on 2081 * the bus. The number of SIMs is limited to one. 2082 */ 2083 2084 devq = cam_simq_alloc(1 /* maximum openings */ ); 2085 if (devq == NULL) { 2086 return (ENOMEM); 2087 } 2088 sc->sc_sim = cam_sim_alloc 2089 (&umass_cam_action, &umass_cam_poll, 2090 DEVNAME_SIM, 2091 sc /* priv */ , 2092 sc->sc_unit /* unit number */ , 2093 &sc->sc_mtx /* mutex */ , 2094 1 /* maximum device openings */ , 2095 0 /* maximum tagged device openings */ , 2096 devq); 2097 2098 if (sc->sc_sim == NULL) { 2099 cam_simq_free(devq); 2100 return (ENOMEM); 2101 } 2102 2103 mtx_lock(&sc->sc_mtx); 2104 2105 if (xpt_bus_register(sc->sc_sim, sc->sc_dev, 2106 sc->sc_unit) != CAM_SUCCESS) { 2107 mtx_unlock(&sc->sc_mtx); 2108 return (ENOMEM); 2109 } 2110 mtx_unlock(&sc->sc_mtx); 2111 2112 return (0); 2113 } 2114 2115 static void 2116 umass_cam_attach(struct umass_softc *sc) 2117 { 2118 #ifndef USB_DEBUG 2119 if (bootverbose) 2120 #endif 2121 printf("%s:%d:%d: Attached to scbus%d\n", 2122 sc->sc_name, cam_sim_path(sc->sc_sim), 2123 sc->sc_unit, cam_sim_path(sc->sc_sim)); 2124 } 2125 2126 /* umass_cam_detach 2127 * detach from the CAM layer 2128 */ 2129 2130 static void 2131 umass_cam_detach_sim(struct umass_softc *sc) 2132 { 2133 if (sc->sc_sim != NULL) { 2134 if (xpt_bus_deregister(cam_sim_path(sc->sc_sim))) { 2135 /* accessing the softc is not possible after this */ 2136 sc->sc_sim->softc = NULL; 2137 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2138 } else { 2139 panic("%s: CAM layer is busy\n", 2140 sc->sc_name); 2141 } 2142 sc->sc_sim = NULL; 2143 } 2144 } 2145 2146 /* umass_cam_action 2147 * CAM requests for action come through here 2148 */ 2149 2150 static void 2151 umass_cam_action(struct cam_sim *sim, union ccb *ccb) 2152 { 2153 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2154 2155 if (sc == NULL) { 2156 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2157 xpt_done(ccb); 2158 return; 2159 } 2160 2161 /* Perform the requested action */ 2162 switch (ccb->ccb_h.func_code) { 2163 case XPT_SCSI_IO: 2164 { 2165 uint8_t *cmd; 2166 uint8_t dir; 2167 2168 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2169 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2170 } else { 2171 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2172 } 2173 2174 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2175 "cmd: 0x%02x, flags: 0x%02x, " 2176 "%db cmd/%db data/%db sense\n", 2177 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2178 (uintmax_t)ccb->ccb_h.target_lun, cmd[0], 2179 ccb->ccb_h.flags & CAM_DIR_MASK, ccb->csio.cdb_len, 2180 ccb->csio.dxfer_len, ccb->csio.sense_len); 2181 2182 if (sc->sc_transfer.ccb) { 2183 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2184 "I/O in progress, deferring\n", 2185 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2186 (uintmax_t)ccb->ccb_h.target_lun); 2187 ccb->ccb_h.status = CAM_SCSI_BUSY; 2188 xpt_done(ccb); 2189 goto done; 2190 } 2191 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 2192 case CAM_DIR_IN: 2193 dir = DIR_IN; 2194 break; 2195 case CAM_DIR_OUT: 2196 dir = DIR_OUT; 2197 DIF(UDMASS_SCSI, 2198 umass_dump_buffer(sc, ccb->csio.data_ptr, 2199 ccb->csio.dxfer_len, 48)); 2200 break; 2201 default: 2202 dir = DIR_NONE; 2203 } 2204 2205 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED; 2206 2207 /* 2208 * sc->sc_transform will convert the command to the 2209 * command format needed by the specific command set 2210 * and return the converted command in 2211 * "sc->sc_transfer.cmd_data" 2212 */ 2213 if (umass_std_transform(sc, ccb, cmd, ccb->csio.cdb_len)) { 2214 2215 if (sc->sc_transfer.cmd_data[0] == INQUIRY) { 2216 const char *pserial; 2217 2218 pserial = usb_get_serial(sc->sc_udev); 2219 2220 /* 2221 * Umass devices don't generally report their serial numbers 2222 * in the usual SCSI way. Emulate it here. 2223 */ 2224 if ((sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2225 (sc->sc_transfer.cmd_data[2] == SVPD_UNIT_SERIAL_NUMBER) && 2226 (pserial[0] != '\0')) { 2227 struct scsi_vpd_unit_serial_number *vpd_serial; 2228 2229 vpd_serial = (struct scsi_vpd_unit_serial_number *)ccb->csio.data_ptr; 2230 vpd_serial->length = strlen(pserial); 2231 if (vpd_serial->length > sizeof(vpd_serial->serial_num)) 2232 vpd_serial->length = sizeof(vpd_serial->serial_num); 2233 memcpy(vpd_serial->serial_num, pserial, vpd_serial->length); 2234 ccb->csio.scsi_status = SCSI_STATUS_OK; 2235 ccb->ccb_h.status = CAM_REQ_CMP; 2236 xpt_done(ccb); 2237 goto done; 2238 } 2239 2240 /* 2241 * Handle EVPD inquiry for broken devices first 2242 * NO_INQUIRY also implies NO_INQUIRY_EVPD 2243 */ 2244 if ((sc->sc_quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) && 2245 (sc->sc_transfer.cmd_data[1] & SI_EVPD)) { 2246 2247 scsi_set_sense_data(&ccb->csio.sense_data, 2248 /*sense_format*/ SSD_TYPE_NONE, 2249 /*current_error*/ 1, 2250 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST, 2251 /*asc*/ 0x24, 2252 /*ascq*/ 0x00, 2253 /*extra args*/ SSD_ELEM_NONE); 2254 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2255 ccb->ccb_h.status = 2256 CAM_SCSI_STATUS_ERROR | 2257 CAM_AUTOSNS_VALID | 2258 CAM_DEV_QFRZN; 2259 xpt_freeze_devq(ccb->ccb_h.path, 1); 2260 xpt_done(ccb); 2261 goto done; 2262 } 2263 /* 2264 * Return fake inquiry data for 2265 * broken devices 2266 */ 2267 if (sc->sc_quirks & NO_INQUIRY) { 2268 memcpy(ccb->csio.data_ptr, &fake_inq_data, 2269 sizeof(fake_inq_data)); 2270 ccb->csio.scsi_status = SCSI_STATUS_OK; 2271 ccb->ccb_h.status = CAM_REQ_CMP; 2272 xpt_done(ccb); 2273 goto done; 2274 } 2275 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2276 ccb->csio.dxfer_len = SHORT_INQUIRY_LENGTH; 2277 } 2278 } else if (sc->sc_transfer.cmd_data[0] == PREVENT_ALLOW) { 2279 if (sc->sc_quirks & NO_PREVENT_ALLOW) { 2280 ccb->csio.scsi_status = SCSI_STATUS_OK; 2281 ccb->ccb_h.status = CAM_REQ_CMP; 2282 xpt_done(ccb); 2283 goto done; 2284 } 2285 } else if (sc->sc_transfer.cmd_data[0] == SYNCHRONIZE_CACHE) { 2286 if (sc->sc_quirks & NO_SYNCHRONIZE_CACHE) { 2287 ccb->csio.scsi_status = SCSI_STATUS_OK; 2288 ccb->ccb_h.status = CAM_REQ_CMP; 2289 xpt_done(ccb); 2290 goto done; 2291 } 2292 } 2293 umass_command_start(sc, dir, ccb->csio.data_ptr, 2294 ccb->csio.dxfer_len, 2295 ccb->ccb_h.timeout, 2296 &umass_cam_cb, ccb); 2297 } 2298 break; 2299 } 2300 case XPT_PATH_INQ: 2301 { 2302 struct ccb_pathinq *cpi = &ccb->cpi; 2303 2304 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_PATH_INQ:.\n", 2305 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2306 (uintmax_t)ccb->ccb_h.target_lun); 2307 2308 /* host specific information */ 2309 cpi->version_num = 1; 2310 cpi->hba_inquiry = 0; 2311 cpi->target_sprt = 0; 2312 cpi->hba_misc = PIM_NO_6_BYTE; 2313 cpi->hba_eng_cnt = 0; 2314 cpi->max_target = UMASS_SCSIID_MAX; /* one target */ 2315 cpi->initiator_id = UMASS_SCSIID_HOST; 2316 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2317 strlcpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN); 2318 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2319 cpi->unit_number = cam_sim_unit(sim); 2320 cpi->bus_id = sc->sc_unit; 2321 cpi->protocol = PROTO_SCSI; 2322 cpi->protocol_version = SCSI_REV_2; 2323 cpi->transport = XPORT_USB; 2324 cpi->transport_version = 0; 2325 2326 if (sc == NULL) { 2327 cpi->base_transfer_speed = 0; 2328 cpi->max_lun = 0; 2329 } else { 2330 if (sc->sc_quirks & FLOPPY_SPEED) { 2331 cpi->base_transfer_speed = 2332 UMASS_FLOPPY_TRANSFER_SPEED; 2333 } else { 2334 switch (usbd_get_speed(sc->sc_udev)) { 2335 case USB_SPEED_SUPER: 2336 cpi->base_transfer_speed = 2337 UMASS_SUPER_TRANSFER_SPEED; 2338 cpi->maxio = MAXPHYS; 2339 break; 2340 case USB_SPEED_HIGH: 2341 cpi->base_transfer_speed = 2342 UMASS_HIGH_TRANSFER_SPEED; 2343 break; 2344 default: 2345 cpi->base_transfer_speed = 2346 UMASS_FULL_TRANSFER_SPEED; 2347 break; 2348 } 2349 } 2350 cpi->max_lun = sc->sc_maxlun; 2351 } 2352 2353 cpi->ccb_h.status = CAM_REQ_CMP; 2354 xpt_done(ccb); 2355 break; 2356 } 2357 case XPT_RESET_DEV: 2358 { 2359 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_RESET_DEV:.\n", 2360 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2361 (uintmax_t)ccb->ccb_h.target_lun); 2362 2363 umass_reset(sc); 2364 2365 ccb->ccb_h.status = CAM_REQ_CMP; 2366 xpt_done(ccb); 2367 break; 2368 } 2369 case XPT_GET_TRAN_SETTINGS: 2370 { 2371 struct ccb_trans_settings *cts = &ccb->cts; 2372 2373 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_GET_TRAN_SETTINGS:.\n", 2374 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2375 (uintmax_t)ccb->ccb_h.target_lun); 2376 2377 cts->protocol = PROTO_SCSI; 2378 cts->protocol_version = SCSI_REV_2; 2379 cts->transport = XPORT_USB; 2380 cts->transport_version = 0; 2381 cts->xport_specific.valid = 0; 2382 2383 ccb->ccb_h.status = CAM_REQ_CMP; 2384 xpt_done(ccb); 2385 break; 2386 } 2387 case XPT_SET_TRAN_SETTINGS: 2388 { 2389 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SET_TRAN_SETTINGS:.\n", 2390 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2391 (uintmax_t)ccb->ccb_h.target_lun); 2392 2393 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2394 xpt_done(ccb); 2395 break; 2396 } 2397 case XPT_CALC_GEOMETRY: 2398 { 2399 cam_calc_geometry(&ccb->ccg, /* extended */ 1); 2400 xpt_done(ccb); 2401 break; 2402 } 2403 case XPT_NOOP: 2404 { 2405 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_NOOP:.\n", 2406 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2407 (uintmax_t)ccb->ccb_h.target_lun); 2408 2409 ccb->ccb_h.status = CAM_REQ_CMP; 2410 xpt_done(ccb); 2411 break; 2412 } 2413 default: 2414 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:func_code 0x%04x: " 2415 "Not implemented\n", 2416 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2417 (uintmax_t)ccb->ccb_h.target_lun, ccb->ccb_h.func_code); 2418 2419 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2420 xpt_done(ccb); 2421 break; 2422 } 2423 2424 done: 2425 return; 2426 } 2427 2428 static void 2429 umass_cam_poll(struct cam_sim *sim) 2430 { 2431 struct umass_softc *sc = (struct umass_softc *)sim->softc; 2432 2433 if (sc == NULL) 2434 return; 2435 2436 DPRINTF(sc, UDMASS_SCSI, "CAM poll\n"); 2437 2438 usbd_transfer_poll(sc->sc_xfer, UMASS_T_MAX); 2439 } 2440 2441 2442 /* umass_cam_cb 2443 * finalise a completed CAM command 2444 */ 2445 2446 static void 2447 umass_cam_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2448 uint8_t status) 2449 { 2450 ccb->csio.resid = residue; 2451 2452 switch (status) { 2453 case STATUS_CMD_OK: 2454 ccb->ccb_h.status = CAM_REQ_CMP; 2455 if ((sc->sc_quirks & READ_CAPACITY_OFFBY1) && 2456 (ccb->ccb_h.func_code == XPT_SCSI_IO) && 2457 (ccb->csio.cdb_io.cdb_bytes[0] == READ_CAPACITY)) { 2458 struct scsi_read_capacity_data *rcap; 2459 uint32_t maxsector; 2460 2461 rcap = (void *)(ccb->csio.data_ptr); 2462 maxsector = scsi_4btoul(rcap->addr) - 1; 2463 scsi_ulto4b(maxsector, rcap->addr); 2464 } 2465 /* 2466 * We have to add SVPD_UNIT_SERIAL_NUMBER to the list 2467 * of pages supported by the device - otherwise, CAM 2468 * will never ask us for the serial number if the 2469 * device cannot handle that by itself. 2470 */ 2471 if (ccb->ccb_h.func_code == XPT_SCSI_IO && 2472 sc->sc_transfer.cmd_data[0] == INQUIRY && 2473 (sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2474 sc->sc_transfer.cmd_data[2] == SVPD_SUPPORTED_PAGE_LIST && 2475 (usb_get_serial(sc->sc_udev)[0] != '\0')) { 2476 struct ccb_scsiio *csio; 2477 struct scsi_vpd_supported_page_list *page_list; 2478 2479 csio = &ccb->csio; 2480 page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; 2481 if (page_list->length + 1 < SVPD_SUPPORTED_PAGES_SIZE) { 2482 page_list->list[page_list->length] = SVPD_UNIT_SERIAL_NUMBER; 2483 page_list->length++; 2484 } 2485 } 2486 xpt_done(ccb); 2487 break; 2488 2489 case STATUS_CMD_UNKNOWN: 2490 case STATUS_CMD_FAILED: 2491 2492 /* fetch sense data */ 2493 2494 /* the rest of the command was filled in at attach */ 2495 sc->cam_scsi_sense.length = ccb->csio.sense_len; 2496 2497 DPRINTF(sc, UDMASS_SCSI, "Fetching %d bytes of " 2498 "sense data\n", ccb->csio.sense_len); 2499 2500 if (umass_std_transform(sc, ccb, &sc->cam_scsi_sense.opcode, 2501 sizeof(sc->cam_scsi_sense))) { 2502 2503 if ((sc->sc_quirks & FORCE_SHORT_INQUIRY) && 2504 (sc->sc_transfer.cmd_data[0] == INQUIRY)) { 2505 ccb->csio.sense_len = SHORT_INQUIRY_LENGTH; 2506 } 2507 umass_command_start(sc, DIR_IN, &ccb->csio.sense_data.error_code, 2508 ccb->csio.sense_len, ccb->ccb_h.timeout, 2509 &umass_cam_sense_cb, ccb); 2510 } 2511 break; 2512 2513 default: 2514 /* 2515 * The wire protocol failed and will hopefully have 2516 * recovered. We return an error to CAM and let CAM 2517 * retry the command if necessary. 2518 */ 2519 xpt_freeze_devq(ccb->ccb_h.path, 1); 2520 ccb->ccb_h.status = CAM_REQ_CMP_ERR | CAM_DEV_QFRZN; 2521 xpt_done(ccb); 2522 break; 2523 } 2524 } 2525 2526 /* 2527 * Finalise a completed autosense operation 2528 */ 2529 static void 2530 umass_cam_sense_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2531 uint8_t status) 2532 { 2533 uint8_t *cmd; 2534 2535 switch (status) { 2536 case STATUS_CMD_OK: 2537 case STATUS_CMD_UNKNOWN: 2538 case STATUS_CMD_FAILED: { 2539 int key, sense_len; 2540 2541 ccb->csio.sense_resid = residue; 2542 sense_len = ccb->csio.sense_len - ccb->csio.sense_resid; 2543 key = scsi_get_sense_key(&ccb->csio.sense_data, sense_len, 2544 /*show_errors*/ 1); 2545 2546 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2547 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2548 } else { 2549 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2550 } 2551 2552 /* 2553 * Getting sense data always succeeds (apart from wire 2554 * failures): 2555 */ 2556 if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2557 (cmd[0] == INQUIRY) && 2558 (key == SSD_KEY_UNIT_ATTENTION)) { 2559 /* 2560 * Ignore unit attention errors in the case where 2561 * the Unit Attention state is not cleared on 2562 * REQUEST SENSE. They will appear again at the next 2563 * command. 2564 */ 2565 ccb->ccb_h.status = CAM_REQ_CMP; 2566 } else if (key == SSD_KEY_NO_SENSE) { 2567 /* 2568 * No problem after all (in the case of CBI without 2569 * CCI) 2570 */ 2571 ccb->ccb_h.status = CAM_REQ_CMP; 2572 } else if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2573 (cmd[0] == READ_CAPACITY) && 2574 (key == SSD_KEY_UNIT_ATTENTION)) { 2575 /* 2576 * Some devices do not clear the unit attention error 2577 * on request sense. We insert a test unit ready 2578 * command to make sure we clear the unit attention 2579 * condition, then allow the retry to proceed as 2580 * usual. 2581 */ 2582 2583 xpt_freeze_devq(ccb->ccb_h.path, 1); 2584 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2585 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2586 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2587 2588 #if 0 2589 DELAY(300000); 2590 #endif 2591 DPRINTF(sc, UDMASS_SCSI, "Doing a sneaky" 2592 "TEST_UNIT_READY\n"); 2593 2594 /* the rest of the command was filled in at attach */ 2595 2596 if ((sc->sc_transform)(sc, 2597 &sc->cam_scsi_test_unit_ready.opcode, 2598 sizeof(sc->cam_scsi_test_unit_ready)) == 1) { 2599 umass_command_start(sc, DIR_NONE, NULL, 0, 2600 ccb->ccb_h.timeout, 2601 &umass_cam_quirk_cb, ccb); 2602 break; 2603 } 2604 } else { 2605 xpt_freeze_devq(ccb->ccb_h.path, 1); 2606 if (key >= 0) { 2607 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2608 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2609 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2610 } else 2611 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL 2612 | CAM_DEV_QFRZN; 2613 } 2614 xpt_done(ccb); 2615 break; 2616 } 2617 default: 2618 DPRINTF(sc, UDMASS_SCSI, "Autosense failed, " 2619 "status %d\n", status); 2620 xpt_freeze_devq(ccb->ccb_h.path, 1); 2621 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL | CAM_DEV_QFRZN; 2622 xpt_done(ccb); 2623 } 2624 } 2625 2626 /* 2627 * This completion code just handles the fact that we sent a test-unit-ready 2628 * after having previously failed a READ CAPACITY with CHECK_COND. The CCB 2629 * status for CAM is already set earlier. 2630 */ 2631 static void 2632 umass_cam_quirk_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2633 uint8_t status) 2634 { 2635 DPRINTF(sc, UDMASS_SCSI, "Test unit ready " 2636 "returned status %d\n", status); 2637 2638 xpt_done(ccb); 2639 } 2640 2641 /* 2642 * SCSI specific functions 2643 */ 2644 2645 static uint8_t 2646 umass_scsi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2647 uint8_t cmd_len) 2648 { 2649 if ((cmd_len == 0) || 2650 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2651 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2652 "length: %d bytes\n", cmd_len); 2653 return (0); /* failure */ 2654 } 2655 sc->sc_transfer.cmd_len = cmd_len; 2656 2657 switch (cmd_ptr[0]) { 2658 case TEST_UNIT_READY: 2659 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2660 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2661 "to START_UNIT\n"); 2662 memset(sc->sc_transfer.cmd_data, 0, cmd_len); 2663 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2664 sc->sc_transfer.cmd_data[4] = SSS_START; 2665 return (1); 2666 } 2667 break; 2668 2669 case INQUIRY: 2670 /* 2671 * some drives wedge when asked for full inquiry 2672 * information. 2673 */ 2674 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2675 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2676 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2677 return (1); 2678 } 2679 break; 2680 } 2681 2682 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2683 return (1); 2684 } 2685 2686 static uint8_t 2687 umass_rbc_transform(struct umass_softc *sc, uint8_t *cmd_ptr, uint8_t cmd_len) 2688 { 2689 if ((cmd_len == 0) || 2690 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2691 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2692 "length: %d bytes\n", cmd_len); 2693 return (0); /* failure */ 2694 } 2695 switch (cmd_ptr[0]) { 2696 /* these commands are defined in RBC: */ 2697 case READ_10: 2698 case READ_CAPACITY: 2699 case START_STOP_UNIT: 2700 case SYNCHRONIZE_CACHE: 2701 case WRITE_10: 2702 case VERIFY_10: 2703 case INQUIRY: 2704 case MODE_SELECT_10: 2705 case MODE_SENSE_10: 2706 case TEST_UNIT_READY: 2707 case WRITE_BUFFER: 2708 /* 2709 * The following commands are not listed in my copy of the 2710 * RBC specs. CAM however seems to want those, and at least 2711 * the Sony DSC device appears to support those as well 2712 */ 2713 case REQUEST_SENSE: 2714 case PREVENT_ALLOW: 2715 2716 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2717 2718 if ((sc->sc_quirks & RBC_PAD_TO_12) && (cmd_len < 12)) { 2719 memset(sc->sc_transfer.cmd_data + cmd_len, 2720 0, 12 - cmd_len); 2721 cmd_len = 12; 2722 } 2723 sc->sc_transfer.cmd_len = cmd_len; 2724 return (1); /* sucess */ 2725 2726 /* All other commands are not legal in RBC */ 2727 default: 2728 DPRINTF(sc, UDMASS_SCSI, "Unsupported RBC " 2729 "command 0x%02x\n", cmd_ptr[0]); 2730 return (0); /* failure */ 2731 } 2732 } 2733 2734 static uint8_t 2735 umass_ufi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2736 uint8_t cmd_len) 2737 { 2738 if ((cmd_len == 0) || 2739 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2740 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2741 "length: %d bytes\n", cmd_len); 2742 return (0); /* failure */ 2743 } 2744 /* An UFI command is always 12 bytes in length */ 2745 sc->sc_transfer.cmd_len = UFI_COMMAND_LENGTH; 2746 2747 /* Zero the command data */ 2748 memset(sc->sc_transfer.cmd_data, 0, UFI_COMMAND_LENGTH); 2749 2750 switch (cmd_ptr[0]) { 2751 /* 2752 * Commands of which the format has been verified. They 2753 * should work. Copy the command into the (zeroed out) 2754 * destination buffer. 2755 */ 2756 case TEST_UNIT_READY: 2757 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2758 /* 2759 * Some devices do not support this command. Start 2760 * Stop Unit should give the same results 2761 */ 2762 DPRINTF(sc, UDMASS_UFI, "Converted TEST_UNIT_READY " 2763 "to START_UNIT\n"); 2764 2765 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2766 sc->sc_transfer.cmd_data[4] = SSS_START; 2767 return (1); 2768 } 2769 break; 2770 2771 case REZERO_UNIT: 2772 case REQUEST_SENSE: 2773 case FORMAT_UNIT: 2774 case INQUIRY: 2775 case START_STOP_UNIT: 2776 case SEND_DIAGNOSTIC: 2777 case PREVENT_ALLOW: 2778 case READ_CAPACITY: 2779 case READ_10: 2780 case WRITE_10: 2781 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2782 case WRITE_AND_VERIFY: 2783 case VERIFY: 2784 case MODE_SELECT_10: 2785 case MODE_SENSE_10: 2786 case READ_12: 2787 case WRITE_12: 2788 case READ_FORMAT_CAPACITIES: 2789 break; 2790 2791 /* 2792 * SYNCHRONIZE_CACHE isn't supported by UFI, nor should it be 2793 * required for UFI devices, so it is appropriate to fake 2794 * success. 2795 */ 2796 case SYNCHRONIZE_CACHE: 2797 return (2); 2798 2799 default: 2800 DPRINTF(sc, UDMASS_SCSI, "Unsupported UFI " 2801 "command 0x%02x\n", cmd_ptr[0]); 2802 return (0); /* failure */ 2803 } 2804 2805 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2806 return (1); /* success */ 2807 } 2808 2809 /* 2810 * 8070i (ATAPI) specific functions 2811 */ 2812 static uint8_t 2813 umass_atapi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2814 uint8_t cmd_len) 2815 { 2816 if ((cmd_len == 0) || 2817 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2818 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2819 "length: %d bytes\n", cmd_len); 2820 return (0); /* failure */ 2821 } 2822 /* An ATAPI command is always 12 bytes in length. */ 2823 sc->sc_transfer.cmd_len = ATAPI_COMMAND_LENGTH; 2824 2825 /* Zero the command data */ 2826 memset(sc->sc_transfer.cmd_data, 0, ATAPI_COMMAND_LENGTH); 2827 2828 switch (cmd_ptr[0]) { 2829 /* 2830 * Commands of which the format has been verified. They 2831 * should work. Copy the command into the destination 2832 * buffer. 2833 */ 2834 case INQUIRY: 2835 /* 2836 * some drives wedge when asked for full inquiry 2837 * information. 2838 */ 2839 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2840 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2841 2842 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2843 return (1); 2844 } 2845 break; 2846 2847 case TEST_UNIT_READY: 2848 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2849 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2850 "to START_UNIT\n"); 2851 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2852 sc->sc_transfer.cmd_data[4] = SSS_START; 2853 return (1); 2854 } 2855 break; 2856 2857 case REZERO_UNIT: 2858 case REQUEST_SENSE: 2859 case START_STOP_UNIT: 2860 case SEND_DIAGNOSTIC: 2861 case PREVENT_ALLOW: 2862 case READ_CAPACITY: 2863 case READ_10: 2864 case WRITE_10: 2865 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2866 case SYNCHRONIZE_CACHE: 2867 case MODE_SELECT_10: 2868 case MODE_SENSE_10: 2869 case READ_BUFFER: 2870 case 0x42: /* READ_SUBCHANNEL */ 2871 case 0x43: /* READ_TOC */ 2872 case 0x44: /* READ_HEADER */ 2873 case 0x47: /* PLAY_MSF (Play Minute/Second/Frame) */ 2874 case 0x48: /* PLAY_TRACK */ 2875 case 0x49: /* PLAY_TRACK_REL */ 2876 case 0x4b: /* PAUSE */ 2877 case 0x51: /* READ_DISK_INFO */ 2878 case 0x52: /* READ_TRACK_INFO */ 2879 case 0x54: /* SEND_OPC */ 2880 case 0x59: /* READ_MASTER_CUE */ 2881 case 0x5b: /* CLOSE_TR_SESSION */ 2882 case 0x5c: /* READ_BUFFER_CAP */ 2883 case 0x5d: /* SEND_CUE_SHEET */ 2884 case 0xa1: /* BLANK */ 2885 case 0xa5: /* PLAY_12 */ 2886 case 0xa6: /* EXCHANGE_MEDIUM */ 2887 case 0xad: /* READ_DVD_STRUCTURE */ 2888 case 0xbb: /* SET_CD_SPEED */ 2889 case 0xe5: /* READ_TRACK_INFO_PHILIPS */ 2890 break; 2891 2892 case READ_12: 2893 case WRITE_12: 2894 default: 2895 DPRINTF(sc, UDMASS_SCSI, "Unsupported ATAPI " 2896 "command 0x%02x - trying anyway\n", 2897 cmd_ptr[0]); 2898 break; 2899 } 2900 2901 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2902 return (1); /* success */ 2903 } 2904 2905 static uint8_t 2906 umass_no_transform(struct umass_softc *sc, uint8_t *cmd, 2907 uint8_t cmdlen) 2908 { 2909 return (0); /* failure */ 2910 } 2911 2912 static uint8_t 2913 umass_std_transform(struct umass_softc *sc, union ccb *ccb, 2914 uint8_t *cmd, uint8_t cmdlen) 2915 { 2916 uint8_t retval; 2917 2918 retval = (sc->sc_transform) (sc, cmd, cmdlen); 2919 2920 if (retval == 2) { 2921 ccb->ccb_h.status = CAM_REQ_CMP; 2922 xpt_done(ccb); 2923 return (0); 2924 } else if (retval == 0) { 2925 xpt_freeze_devq(ccb->ccb_h.path, 1); 2926 ccb->ccb_h.status = CAM_REQ_INVALID | CAM_DEV_QFRZN; 2927 xpt_done(ccb); 2928 return (0); 2929 } 2930 /* Command should be executed */ 2931 return (1); 2932 } 2933 2934 #ifdef USB_DEBUG 2935 static void 2936 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2937 { 2938 uint8_t *c = cbw->CBWCDB; 2939 2940 uint32_t dlen = UGETDW(cbw->dCBWDataTransferLength); 2941 uint32_t tag = UGETDW(cbw->dCBWTag); 2942 2943 uint8_t clen = cbw->bCDBLength; 2944 uint8_t flags = cbw->bCBWFlags; 2945 uint8_t lun = cbw->bCBWLUN; 2946 2947 DPRINTF(sc, UDMASS_BBB, "CBW %d: cmd = %db " 2948 "(0x%02x%02x%02x%02x%02x%02x%s), " 2949 "data = %db, lun = %d, dir = %s\n", 2950 tag, clen, 2951 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6 ? "..." : ""), 2952 dlen, lun, (flags == CBWFLAGS_IN ? "in" : 2953 (flags == CBWFLAGS_OUT ? "out" : "<invalid>"))); 2954 } 2955 2956 static void 2957 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2958 { 2959 uint32_t sig = UGETDW(csw->dCSWSignature); 2960 uint32_t tag = UGETDW(csw->dCSWTag); 2961 uint32_t res = UGETDW(csw->dCSWDataResidue); 2962 uint8_t status = csw->bCSWStatus; 2963 2964 DPRINTF(sc, UDMASS_BBB, "CSW %d: sig = 0x%08x (%s), tag = 0x%08x, " 2965 "res = %d, status = 0x%02x (%s)\n", 2966 tag, sig, (sig == CSWSIGNATURE ? "valid" : "invalid"), 2967 tag, res, 2968 status, (status == CSWSTATUS_GOOD ? "good" : 2969 (status == CSWSTATUS_FAILED ? "failed" : 2970 (status == CSWSTATUS_PHASE ? "phase" : "<invalid>")))); 2971 } 2972 2973 static void 2974 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, uint8_t cmdlen) 2975 { 2976 uint8_t *c = cmd; 2977 uint8_t dir = sc->sc_transfer.dir; 2978 2979 DPRINTF(sc, UDMASS_BBB, "cmd = %db " 2980 "(0x%02x%02x%02x%02x%02x%02x%s), " 2981 "data = %db, dir = %s\n", 2982 cmdlen, 2983 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6 ? "..." : ""), 2984 sc->sc_transfer.data_len, 2985 (dir == DIR_IN ? "in" : 2986 (dir == DIR_OUT ? "out" : 2987 (dir == DIR_NONE ? "no data phase" : "<invalid>")))); 2988 } 2989 2990 static void 2991 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, uint32_t buflen, 2992 uint32_t printlen) 2993 { 2994 uint32_t i, j; 2995 char s1[40]; 2996 char s2[40]; 2997 char s3[5]; 2998 2999 s1[0] = '\0'; 3000 s3[0] = '\0'; 3001 3002 sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen); 3003 for (i = 0; (i < buflen) && (i < printlen); i++) { 3004 j = i % 16; 3005 if (j == 0 && i != 0) { 3006 DPRINTF(sc, UDMASS_GEN, "0x %s%s\n", 3007 s1, s2); 3008 s2[0] = '\0'; 3009 } 3010 sprintf(&s1[j * 2], "%02x", buffer[i] & 0xff); 3011 } 3012 if (buflen > printlen) 3013 sprintf(s3, " ..."); 3014 DPRINTF(sc, UDMASS_GEN, "0x %s%s%s\n", 3015 s1, s2, s3); 3016 } 3017 3018 #endif 3019