1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 1999 MAEKAWA Masahide <bishop@rr.iij4u.or.jp>, 5 * Nick Hibma <n_hibma@FreeBSD.org> 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 * $NetBSD: umass.c,v 1.28 2000/04/02 23:46:53 augustss Exp $ 29 */ 30 31 /* Also already merged from NetBSD: 32 * $NetBSD: umass.c,v 1.67 2001/11/25 19:05:22 augustss Exp $ 33 * $NetBSD: umass.c,v 1.90 2002/11/04 19:17:33 pooka Exp $ 34 * $NetBSD: umass.c,v 1.108 2003/11/07 17:03:25 wiz Exp $ 35 * $NetBSD: umass.c,v 1.109 2003/12/04 13:57:31 keihan Exp $ 36 */ 37 38 /* 39 * Universal Serial Bus Mass Storage Class specs: 40 * http://www.usb.org/developers/devclass_docs/usb_msc_overview_1.2.pdf 41 * http://www.usb.org/developers/devclass_docs/usbmassbulk_10.pdf 42 * http://www.usb.org/developers/devclass_docs/usb_msc_cbi_1.1.pdf 43 * http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf 44 */ 45 46 /* 47 * Ported to NetBSD by Lennart Augustsson <augustss@NetBSD.org>. 48 * Parts of the code written by Jason R. Thorpe <thorpej@shagadelic.org>. 49 */ 50 51 /* 52 * The driver handles 3 Wire Protocols 53 * - Command/Bulk/Interrupt (CBI) 54 * - Command/Bulk/Interrupt with Command Completion Interrupt (CBI with CCI) 55 * - Mass Storage Bulk-Only (BBB) 56 * (BBB refers Bulk/Bulk/Bulk for Command/Data/Status phases) 57 * 58 * Over these wire protocols it handles the following command protocols 59 * - SCSI 60 * - UFI (floppy command set) 61 * - 8070i (ATAPI) 62 * 63 * UFI and 8070i (ATAPI) are transformed versions of the SCSI command set. The 64 * sc->sc_transform method is used to convert the commands into the appropriate 65 * format (if at all necessary). For example, UFI requires all commands to be 66 * 12 bytes in length amongst other things. 67 * 68 * The source code below is marked and can be split into a number of pieces 69 * (in this order): 70 * 71 * - probe/attach/detach 72 * - generic transfer routines 73 * - BBB 74 * - CBI 75 * - CBI_I (in addition to functions from CBI) 76 * - CAM (Common Access Method) 77 * - SCSI 78 * - UFI 79 * - 8070i (ATAPI) 80 * 81 * The protocols are implemented using a state machine, for the transfers as 82 * well as for the resets. The state machine is contained in umass_t_*_callback. 83 * The state machine is started through either umass_command_start() or 84 * umass_reset(). 85 * 86 * The reason for doing this is a) CAM performs a lot better this way and b) it 87 * avoids using tsleep from interrupt context (for example after a failed 88 * transfer). 89 */ 90 91 /* 92 * The SCSI related part of this driver has been derived from the 93 * dev/ppbus/vpo.c driver, by Nicolas Souchu (nsouch@FreeBSD.org). 94 * 95 * The CAM layer uses so called actions which are messages sent to the host 96 * adapter for completion. The actions come in through umass_cam_action. The 97 * appropriate block of routines is called depending on the transport protocol 98 * in use. When the transfer has finished, these routines call 99 * umass_cam_cb again to complete the CAM command. 100 */ 101 102 #include <sys/stdint.h> 103 #include <sys/stddef.h> 104 #include <sys/param.h> 105 #include <sys/queue.h> 106 #include <sys/types.h> 107 #include <sys/systm.h> 108 #include <sys/kernel.h> 109 #include <sys/bus.h> 110 #include <sys/module.h> 111 #include <sys/lock.h> 112 #include <sys/mutex.h> 113 #include <sys/condvar.h> 114 #include <sys/sysctl.h> 115 #include <sys/sx.h> 116 #include <sys/unistd.h> 117 #include <sys/callout.h> 118 #include <sys/malloc.h> 119 #include <sys/priv.h> 120 121 #include <dev/usb/usb.h> 122 #include <dev/usb/usbdi.h> 123 #include <dev/usb/usbdi_util.h> 124 #include "usbdevs.h" 125 126 #include <dev/usb/quirk/usb_quirk.h> 127 128 #include <cam/cam.h> 129 #include <cam/cam_ccb.h> 130 #include <cam/cam_sim.h> 131 #include <cam/cam_xpt_sim.h> 132 #include <cam/scsi/scsi_all.h> 133 #include <cam/scsi/scsi_da.h> 134 135 #include <cam/cam_periph.h> 136 137 #ifdef USB_DEBUG 138 #define DIF(m, x) \ 139 do { \ 140 if (umass_debug & (m)) { x ; } \ 141 } while (0) 142 143 #define DPRINTF(sc, m, fmt, ...) \ 144 do { \ 145 if (umass_debug & (m)) { \ 146 printf("%s:%s: " fmt, \ 147 (sc) ? (const char *)(sc)->sc_name : \ 148 (const char *)"umassX", \ 149 __FUNCTION__ ,## __VA_ARGS__); \ 150 } \ 151 } while (0) 152 153 #define UDMASS_GEN 0x00010000 /* general */ 154 #define UDMASS_SCSI 0x00020000 /* scsi */ 155 #define UDMASS_UFI 0x00040000 /* ufi command set */ 156 #define UDMASS_ATAPI 0x00080000 /* 8070i command set */ 157 #define UDMASS_CMD (UDMASS_SCSI|UDMASS_UFI|UDMASS_ATAPI) 158 #define UDMASS_USB 0x00100000 /* USB general */ 159 #define UDMASS_BBB 0x00200000 /* Bulk-Only transfers */ 160 #define UDMASS_CBI 0x00400000 /* CBI transfers */ 161 #define UDMASS_WIRE (UDMASS_BBB|UDMASS_CBI) 162 #define UDMASS_ALL 0xffff0000 /* all of the above */ 163 static int umass_debug; 164 static int umass_throttle; 165 166 static SYSCTL_NODE(_hw_usb, OID_AUTO, umass, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 167 "USB umass"); 168 SYSCTL_INT(_hw_usb_umass, OID_AUTO, debug, CTLFLAG_RWTUN, 169 &umass_debug, 0, "umass debug level"); 170 SYSCTL_INT(_hw_usb_umass, OID_AUTO, throttle, CTLFLAG_RWTUN, 171 &umass_throttle, 0, "Forced delay between commands in milliseconds"); 172 #else 173 #define DIF(...) do { } while (0) 174 #define DPRINTF(...) do { } while (0) 175 #endif 176 177 #define UMASS_BULK_SIZE (1 << 17) 178 #define UMASS_CBI_DIAGNOSTIC_CMDLEN 12 /* bytes */ 179 #define UMASS_MAX_CMDLEN MAX(12, CAM_MAX_CDBLEN) /* bytes */ 180 181 /* USB transfer definitions */ 182 183 #define UMASS_T_BBB_RESET1 0 /* Bulk-Only */ 184 #define UMASS_T_BBB_RESET2 1 185 #define UMASS_T_BBB_RESET3 2 186 #define UMASS_T_BBB_COMMAND 3 187 #define UMASS_T_BBB_DATA_READ 4 188 #define UMASS_T_BBB_DATA_RD_CS 5 189 #define UMASS_T_BBB_DATA_WRITE 6 190 #define UMASS_T_BBB_DATA_WR_CS 7 191 #define UMASS_T_BBB_STATUS 8 192 #define UMASS_T_BBB_MAX 9 193 194 #define UMASS_T_CBI_RESET1 0 /* CBI */ 195 #define UMASS_T_CBI_RESET2 1 196 #define UMASS_T_CBI_RESET3 2 197 #define UMASS_T_CBI_COMMAND 3 198 #define UMASS_T_CBI_DATA_READ 4 199 #define UMASS_T_CBI_DATA_RD_CS 5 200 #define UMASS_T_CBI_DATA_WRITE 6 201 #define UMASS_T_CBI_DATA_WR_CS 7 202 #define UMASS_T_CBI_STATUS 8 203 #define UMASS_T_CBI_RESET4 9 204 #define UMASS_T_CBI_MAX 10 205 206 #define UMASS_T_MAX MAX(UMASS_T_CBI_MAX, UMASS_T_BBB_MAX) 207 208 /* Generic definitions */ 209 210 /* Direction for transfer */ 211 #define DIR_NONE 0 212 #define DIR_IN 1 213 #define DIR_OUT 2 214 215 /* device name */ 216 #define DEVNAME "umass" 217 #define DEVNAME_SIM "umass-sim" 218 219 /* Approximate maximum transfer speeds (assumes 33% overhead). */ 220 #define UMASS_FULL_TRANSFER_SPEED 1000 221 #define UMASS_HIGH_TRANSFER_SPEED 40000 222 #define UMASS_SUPER_TRANSFER_SPEED 400000 223 #define UMASS_FLOPPY_TRANSFER_SPEED 20 224 225 #define UMASS_TIMEOUT 5000 /* ms */ 226 227 /* CAM specific definitions */ 228 229 #define UMASS_SCSIID_MAX 1 /* maximum number of drives expected */ 230 #define UMASS_SCSIID_HOST UMASS_SCSIID_MAX 231 232 /* Bulk-Only features */ 233 234 #define UR_BBB_RESET 0xff /* Bulk-Only reset */ 235 #define UR_BBB_GET_MAX_LUN 0xfe /* Get maximum lun */ 236 237 /* Command Block Wrapper */ 238 typedef struct { 239 uDWord dCBWSignature; 240 #define CBWSIGNATURE 0x43425355 241 uDWord dCBWTag; 242 uDWord dCBWDataTransferLength; 243 uByte bCBWFlags; 244 #define CBWFLAGS_OUT 0x00 245 #define CBWFLAGS_IN 0x80 246 uByte bCBWLUN; 247 uByte bCDBLength; 248 #define CBWCDBLENGTH 16 249 uByte CBWCDB[CBWCDBLENGTH]; 250 } __packed umass_bbb_cbw_t; 251 252 #define UMASS_BBB_CBW_SIZE 31 253 254 /* Command Status Wrapper */ 255 typedef struct { 256 uDWord dCSWSignature; 257 #define CSWSIGNATURE 0x53425355 258 #define CSWSIGNATURE_IMAGINATION_DBX1 0x43425355 259 #define CSWSIGNATURE_OLYMPUS_C1 0x55425355 260 uDWord dCSWTag; 261 uDWord dCSWDataResidue; 262 uByte bCSWStatus; 263 #define CSWSTATUS_GOOD 0x0 264 #define CSWSTATUS_FAILED 0x1 265 #define CSWSTATUS_PHASE 0x2 266 } __packed umass_bbb_csw_t; 267 268 #define UMASS_BBB_CSW_SIZE 13 269 270 /* CBI features */ 271 272 #define UR_CBI_ADSC 0x00 273 274 typedef union { 275 struct { 276 uint8_t type; 277 #define IDB_TYPE_CCI 0x00 278 uint8_t value; 279 #define IDB_VALUE_PASS 0x00 280 #define IDB_VALUE_FAIL 0x01 281 #define IDB_VALUE_PHASE 0x02 282 #define IDB_VALUE_PERSISTENT 0x03 283 #define IDB_VALUE_STATUS_MASK 0x03 284 } __packed common; 285 286 struct { 287 uint8_t asc; 288 uint8_t ascq; 289 } __packed ufi; 290 } __packed umass_cbi_sbl_t; 291 292 struct umass_softc; /* see below */ 293 294 typedef void (umass_callback_t)(struct umass_softc *sc, union ccb *ccb, 295 uint32_t residue, uint8_t status); 296 297 #define STATUS_CMD_OK 0 /* everything ok */ 298 #define STATUS_CMD_UNKNOWN 1 /* will have to fetch sense */ 299 #define STATUS_CMD_FAILED 2 /* transfer was ok, command failed */ 300 #define STATUS_WIRE_FAILED 3 /* couldn't even get command across */ 301 302 typedef uint8_t (umass_transform_t)(struct umass_softc *sc, uint8_t *cmd_ptr, 303 uint8_t cmd_len); 304 305 /* Wire and command protocol */ 306 #define UMASS_PROTO_BBB 0x0001 /* USB wire protocol */ 307 #define UMASS_PROTO_CBI 0x0002 308 #define UMASS_PROTO_CBI_I 0x0004 309 #define UMASS_PROTO_WIRE 0x00ff /* USB wire protocol mask */ 310 #define UMASS_PROTO_SCSI 0x0100 /* command protocol */ 311 #define UMASS_PROTO_ATAPI 0x0200 312 #define UMASS_PROTO_UFI 0x0400 313 #define UMASS_PROTO_RBC 0x0800 314 #define UMASS_PROTO_COMMAND 0xff00 /* command protocol mask */ 315 316 /* Device specific quirks */ 317 #define NO_QUIRKS 0x0000 318 /* 319 * The drive does not support Test Unit Ready. Convert to Start Unit 320 */ 321 #define NO_TEST_UNIT_READY 0x0001 322 /* 323 * The drive does not reset the Unit Attention state after REQUEST 324 * SENSE has been sent. The INQUIRY command does not reset the UA 325 * either, and so CAM runs in circles trying to retrieve the initial 326 * INQUIRY data. 327 */ 328 #define RS_NO_CLEAR_UA 0x0002 329 /* The drive does not support START STOP. */ 330 #define NO_START_STOP 0x0004 331 /* Don't ask for full inquiry data (255b). */ 332 #define FORCE_SHORT_INQUIRY 0x0008 333 /* Needs to be initialised the Shuttle way */ 334 #define SHUTTLE_INIT 0x0010 335 /* Drive needs to be switched to alternate iface 1 */ 336 #define ALT_IFACE_1 0x0020 337 /* Drive does not do 1Mb/s, but just floppy speeds (20kb/s) */ 338 #define FLOPPY_SPEED 0x0040 339 /* The device can't count and gets the residue of transfers wrong */ 340 #define IGNORE_RESIDUE 0x0080 341 /* No GetMaxLun call */ 342 #define NO_GETMAXLUN 0x0100 343 /* The device uses a weird CSWSIGNATURE. */ 344 #define WRONG_CSWSIG 0x0200 345 /* Device cannot handle INQUIRY so fake a generic response */ 346 #define NO_INQUIRY 0x0400 347 /* Device cannot handle INQUIRY EVPD, return CHECK CONDITION */ 348 #define NO_INQUIRY_EVPD 0x0800 349 /* Pad all RBC requests to 12 bytes. */ 350 #define RBC_PAD_TO_12 0x1000 351 /* 352 * Device reports number of sectors from READ_CAPACITY, not max 353 * sector number. 354 */ 355 #define READ_CAPACITY_OFFBY1 0x2000 356 /* 357 * Device cannot handle a SCSI synchronize cache command. Normally 358 * this quirk would be handled in the cam layer, but for IDE bridges 359 * we need to associate the quirk with the bridge and not the 360 * underlying disk device. This is handled by faking a success 361 * result. 362 */ 363 #define NO_SYNCHRONIZE_CACHE 0x4000 364 /* Device does not support 'PREVENT/ALLOW MEDIUM REMOVAL'. */ 365 #define NO_PREVENT_ALLOW 0x8000 366 367 #define UMASS_QUIRKS_STRING \ 368 "\020" \ 369 "\001NO_TEST_UNIT_READY" \ 370 "\002RS_NO_CLEAR_UA" \ 371 "\003NO_START_STOP" \ 372 "\004FORCE_SHORT_INQUIRY" \ 373 "\005SHUTTLE_INIT" \ 374 "\006ALT_IFACE_1" \ 375 "\007FLOPPY_SPEED" \ 376 "\010IGNORE_RESIDUE" \ 377 "\011NO_GETMAXLUN" \ 378 "\012WRONG_CSWSIG" \ 379 "\013NO_INQUIRY" \ 380 "\014NO_INQUIRY_EVPD" \ 381 "\015RBC_PAD_TO_12" \ 382 "\016READ_CAPACITY_OFFBY1" \ 383 "\017NO_SYNCHRONIZE_CACHE" \ 384 "\020NO_PREVENT_ALLOW" \ 385 386 387 struct umass_softc { 388 struct scsi_sense cam_scsi_sense; 389 struct scsi_test_unit_ready cam_scsi_test_unit_ready; 390 struct mtx sc_mtx; 391 struct { 392 uint8_t *data_ptr; 393 union ccb *ccb; 394 umass_callback_t *callback; 395 396 uint32_t data_len; /* bytes */ 397 uint32_t data_rem; /* bytes */ 398 uint32_t data_timeout; /* ms */ 399 uint32_t actlen; /* bytes */ 400 401 uint8_t cmd_data[UMASS_MAX_CMDLEN]; 402 uint8_t cmd_len; /* bytes */ 403 uint8_t dir; 404 uint8_t lun; 405 } sc_transfer; 406 407 /* Bulk specific variables for transfers in progress */ 408 umass_bbb_cbw_t cbw; /* command block wrapper */ 409 umass_bbb_csw_t csw; /* command status wrapper */ 410 411 /* CBI specific variables for transfers in progress */ 412 umass_cbi_sbl_t sbl; /* status block */ 413 414 device_t sc_dev; 415 struct usb_device *sc_udev; 416 struct cam_sim *sc_sim; /* SCSI Interface Module */ 417 struct usb_xfer *sc_xfer[UMASS_T_MAX]; 418 419 /* 420 * The command transform function is used to convert the SCSI 421 * commands into their derivatives, like UFI, ATAPI, and friends. 422 */ 423 umass_transform_t *sc_transform; 424 425 uint32_t sc_unit; 426 uint32_t sc_quirks; /* they got it almost right */ 427 uint32_t sc_proto; /* wire and cmd protocol */ 428 429 uint8_t sc_name[16]; 430 uint8_t sc_iface_no; /* interface number */ 431 uint8_t sc_maxlun; /* maximum LUN number, inclusive */ 432 uint8_t sc_last_xfer_index; 433 uint8_t sc_status_try; 434 }; 435 436 struct umass_probe_proto { 437 uint32_t quirks; 438 uint32_t proto; 439 440 int error; 441 }; 442 443 /* prototypes */ 444 445 static device_probe_t umass_probe; 446 static device_attach_t umass_attach; 447 static device_detach_t umass_detach; 448 449 static usb_callback_t umass_tr_error; 450 static usb_callback_t umass_t_bbb_reset1_callback; 451 static usb_callback_t umass_t_bbb_reset2_callback; 452 static usb_callback_t umass_t_bbb_reset3_callback; 453 static usb_callback_t umass_t_bbb_command_callback; 454 static usb_callback_t umass_t_bbb_data_read_callback; 455 static usb_callback_t umass_t_bbb_data_rd_cs_callback; 456 static usb_callback_t umass_t_bbb_data_write_callback; 457 static usb_callback_t umass_t_bbb_data_wr_cs_callback; 458 static usb_callback_t umass_t_bbb_status_callback; 459 static usb_callback_t umass_t_cbi_reset1_callback; 460 static usb_callback_t umass_t_cbi_reset2_callback; 461 static usb_callback_t umass_t_cbi_reset3_callback; 462 static usb_callback_t umass_t_cbi_reset4_callback; 463 static usb_callback_t umass_t_cbi_command_callback; 464 static usb_callback_t umass_t_cbi_data_read_callback; 465 static usb_callback_t umass_t_cbi_data_rd_cs_callback; 466 static usb_callback_t umass_t_cbi_data_write_callback; 467 static usb_callback_t umass_t_cbi_data_wr_cs_callback; 468 static usb_callback_t umass_t_cbi_status_callback; 469 470 static void umass_cancel_ccb(struct umass_softc *); 471 static void umass_init_shuttle(struct umass_softc *); 472 static void umass_reset(struct umass_softc *); 473 static void umass_t_bbb_data_clear_stall_callback(struct usb_xfer *, 474 uint8_t, uint8_t, usb_error_t); 475 static void umass_command_start(struct umass_softc *, uint8_t, void *, 476 uint32_t, uint32_t, umass_callback_t *, union ccb *); 477 static uint8_t umass_bbb_get_max_lun(struct umass_softc *); 478 static void umass_cbi_start_status(struct umass_softc *); 479 static void umass_t_cbi_data_clear_stall_callback(struct usb_xfer *, 480 uint8_t, uint8_t, usb_error_t); 481 static int umass_cam_attach_sim(struct umass_softc *); 482 static void umass_cam_attach(struct umass_softc *); 483 static void umass_cam_detach_sim(struct umass_softc *); 484 static void umass_cam_action(struct cam_sim *, union ccb *); 485 static void umass_cam_poll(struct cam_sim *); 486 static void umass_cam_cb(struct umass_softc *, union ccb *, uint32_t, 487 uint8_t); 488 static void umass_cam_sense_cb(struct umass_softc *, union ccb *, uint32_t, 489 uint8_t); 490 static void umass_cam_quirk_cb(struct umass_softc *, union ccb *, uint32_t, 491 uint8_t); 492 static uint8_t umass_scsi_transform(struct umass_softc *, uint8_t *, uint8_t); 493 static uint8_t umass_rbc_transform(struct umass_softc *, uint8_t *, uint8_t); 494 static uint8_t umass_ufi_transform(struct umass_softc *, uint8_t *, uint8_t); 495 static uint8_t umass_atapi_transform(struct umass_softc *, uint8_t *, 496 uint8_t); 497 static uint8_t umass_no_transform(struct umass_softc *, uint8_t *, uint8_t); 498 static uint8_t umass_std_transform(struct umass_softc *, union ccb *, uint8_t 499 *, uint8_t); 500 501 #ifdef USB_DEBUG 502 static void umass_bbb_dump_cbw(struct umass_softc *, umass_bbb_cbw_t *); 503 static void umass_bbb_dump_csw(struct umass_softc *, umass_bbb_csw_t *); 504 static void umass_cbi_dump_cmd(struct umass_softc *, void *, uint8_t); 505 static void umass_dump_buffer(struct umass_softc *, uint8_t *, uint32_t, 506 uint32_t); 507 #endif 508 509 static struct usb_config umass_bbb_config[UMASS_T_BBB_MAX] = { 510 [UMASS_T_BBB_RESET1] = { 511 .type = UE_CONTROL, 512 .endpoint = 0x00, /* Control pipe */ 513 .direction = UE_DIR_ANY, 514 .bufsize = sizeof(struct usb_device_request), 515 .callback = &umass_t_bbb_reset1_callback, 516 .timeout = 5000, /* 5 seconds */ 517 .interval = 500, /* 500 milliseconds */ 518 }, 519 520 [UMASS_T_BBB_RESET2] = { 521 .type = UE_CONTROL, 522 .endpoint = 0x00, /* Control pipe */ 523 .direction = UE_DIR_ANY, 524 .bufsize = sizeof(struct usb_device_request), 525 .callback = &umass_t_bbb_reset2_callback, 526 .timeout = 5000, /* 5 seconds */ 527 .interval = 50, /* 50 milliseconds */ 528 }, 529 530 [UMASS_T_BBB_RESET3] = { 531 .type = UE_CONTROL, 532 .endpoint = 0x00, /* Control pipe */ 533 .direction = UE_DIR_ANY, 534 .bufsize = sizeof(struct usb_device_request), 535 .callback = &umass_t_bbb_reset3_callback, 536 .timeout = 5000, /* 5 seconds */ 537 .interval = 50, /* 50 milliseconds */ 538 }, 539 540 [UMASS_T_BBB_COMMAND] = { 541 .type = UE_BULK, 542 .endpoint = UE_ADDR_ANY, 543 .direction = UE_DIR_OUT, 544 .bufsize = sizeof(umass_bbb_cbw_t), 545 .callback = &umass_t_bbb_command_callback, 546 .timeout = 5000, /* 5 seconds */ 547 }, 548 549 [UMASS_T_BBB_DATA_READ] = { 550 .type = UE_BULK, 551 .endpoint = UE_ADDR_ANY, 552 .direction = UE_DIR_IN, 553 .bufsize = UMASS_BULK_SIZE, 554 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 555 .callback = &umass_t_bbb_data_read_callback, 556 .timeout = 0, /* overwritten later */ 557 }, 558 559 [UMASS_T_BBB_DATA_RD_CS] = { 560 .type = UE_CONTROL, 561 .endpoint = 0x00, /* Control pipe */ 562 .direction = UE_DIR_ANY, 563 .bufsize = sizeof(struct usb_device_request), 564 .callback = &umass_t_bbb_data_rd_cs_callback, 565 .timeout = 5000, /* 5 seconds */ 566 }, 567 568 [UMASS_T_BBB_DATA_WRITE] = { 569 .type = UE_BULK, 570 .endpoint = UE_ADDR_ANY, 571 .direction = UE_DIR_OUT, 572 .bufsize = UMASS_BULK_SIZE, 573 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 574 .callback = &umass_t_bbb_data_write_callback, 575 .timeout = 0, /* overwritten later */ 576 }, 577 578 [UMASS_T_BBB_DATA_WR_CS] = { 579 .type = UE_CONTROL, 580 .endpoint = 0x00, /* Control pipe */ 581 .direction = UE_DIR_ANY, 582 .bufsize = sizeof(struct usb_device_request), 583 .callback = &umass_t_bbb_data_wr_cs_callback, 584 .timeout = 5000, /* 5 seconds */ 585 }, 586 587 [UMASS_T_BBB_STATUS] = { 588 .type = UE_BULK, 589 .endpoint = UE_ADDR_ANY, 590 .direction = UE_DIR_IN, 591 .bufsize = sizeof(umass_bbb_csw_t), 592 .flags = {.short_xfer_ok = 1,}, 593 .callback = &umass_t_bbb_status_callback, 594 .timeout = 5000, /* ms */ 595 }, 596 }; 597 598 static struct usb_config umass_cbi_config[UMASS_T_CBI_MAX] = { 599 [UMASS_T_CBI_RESET1] = { 600 .type = UE_CONTROL, 601 .endpoint = 0x00, /* Control pipe */ 602 .direction = UE_DIR_ANY, 603 .bufsize = (sizeof(struct usb_device_request) + 604 UMASS_CBI_DIAGNOSTIC_CMDLEN), 605 .callback = &umass_t_cbi_reset1_callback, 606 .timeout = 5000, /* 5 seconds */ 607 .interval = 500, /* 500 milliseconds */ 608 }, 609 610 [UMASS_T_CBI_RESET2] = { 611 .type = UE_CONTROL, 612 .endpoint = 0x00, /* Control pipe */ 613 .direction = UE_DIR_ANY, 614 .bufsize = sizeof(struct usb_device_request), 615 .callback = &umass_t_cbi_reset2_callback, 616 .timeout = 5000, /* 5 seconds */ 617 .interval = 50, /* 50 milliseconds */ 618 }, 619 620 [UMASS_T_CBI_RESET3] = { 621 .type = UE_CONTROL, 622 .endpoint = 0x00, /* Control pipe */ 623 .direction = UE_DIR_ANY, 624 .bufsize = sizeof(struct usb_device_request), 625 .callback = &umass_t_cbi_reset3_callback, 626 .timeout = 5000, /* 5 seconds */ 627 .interval = 50, /* 50 milliseconds */ 628 }, 629 630 [UMASS_T_CBI_COMMAND] = { 631 .type = UE_CONTROL, 632 .endpoint = 0x00, /* Control pipe */ 633 .direction = UE_DIR_ANY, 634 .bufsize = (sizeof(struct usb_device_request) + 635 UMASS_MAX_CMDLEN), 636 .callback = &umass_t_cbi_command_callback, 637 .timeout = 5000, /* 5 seconds */ 638 }, 639 640 [UMASS_T_CBI_DATA_READ] = { 641 .type = UE_BULK, 642 .endpoint = UE_ADDR_ANY, 643 .direction = UE_DIR_IN, 644 .bufsize = UMASS_BULK_SIZE, 645 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 646 .callback = &umass_t_cbi_data_read_callback, 647 .timeout = 0, /* overwritten later */ 648 }, 649 650 [UMASS_T_CBI_DATA_RD_CS] = { 651 .type = UE_CONTROL, 652 .endpoint = 0x00, /* Control pipe */ 653 .direction = UE_DIR_ANY, 654 .bufsize = sizeof(struct usb_device_request), 655 .callback = &umass_t_cbi_data_rd_cs_callback, 656 .timeout = 5000, /* 5 seconds */ 657 }, 658 659 [UMASS_T_CBI_DATA_WRITE] = { 660 .type = UE_BULK, 661 .endpoint = UE_ADDR_ANY, 662 .direction = UE_DIR_OUT, 663 .bufsize = UMASS_BULK_SIZE, 664 .flags = {.proxy_buffer = 1,.short_xfer_ok = 1,.ext_buffer=1,}, 665 .callback = &umass_t_cbi_data_write_callback, 666 .timeout = 0, /* overwritten later */ 667 }, 668 669 [UMASS_T_CBI_DATA_WR_CS] = { 670 .type = UE_CONTROL, 671 .endpoint = 0x00, /* Control pipe */ 672 .direction = UE_DIR_ANY, 673 .bufsize = sizeof(struct usb_device_request), 674 .callback = &umass_t_cbi_data_wr_cs_callback, 675 .timeout = 5000, /* 5 seconds */ 676 }, 677 678 [UMASS_T_CBI_STATUS] = { 679 .type = UE_INTERRUPT, 680 .endpoint = UE_ADDR_ANY, 681 .direction = UE_DIR_IN, 682 .flags = {.short_xfer_ok = 1,.no_pipe_ok = 1,}, 683 .bufsize = sizeof(umass_cbi_sbl_t), 684 .callback = &umass_t_cbi_status_callback, 685 .timeout = 5000, /* ms */ 686 }, 687 688 [UMASS_T_CBI_RESET4] = { 689 .type = UE_CONTROL, 690 .endpoint = 0x00, /* Control pipe */ 691 .direction = UE_DIR_ANY, 692 .bufsize = sizeof(struct usb_device_request), 693 .callback = &umass_t_cbi_reset4_callback, 694 .timeout = 5000, /* ms */ 695 }, 696 }; 697 698 /* If device cannot return valid inquiry data, fake it */ 699 static const uint8_t fake_inq_data[SHORT_INQUIRY_LENGTH] = { 700 0, /* removable */ 0x80, SCSI_REV_2, SCSI_REV_2, 701 /* additional_length */ 31, 0, 0, 0 702 }; 703 704 #define UFI_COMMAND_LENGTH 12 /* UFI commands are always 12 bytes */ 705 #define ATAPI_COMMAND_LENGTH 12 /* ATAPI commands are always 12 bytes */ 706 707 static device_method_t umass_methods[] = { 708 /* Device interface */ 709 DEVMETHOD(device_probe, umass_probe), 710 DEVMETHOD(device_attach, umass_attach), 711 DEVMETHOD(device_detach, umass_detach), 712 713 DEVMETHOD_END 714 }; 715 716 static driver_t umass_driver = { 717 .name = "umass", 718 .methods = umass_methods, 719 .size = sizeof(struct umass_softc), 720 }; 721 722 static const STRUCT_USB_HOST_ID __used umass_devs[] = { 723 /* generic mass storage class */ 724 {USB_IFACE_CLASS(UICLASS_MASS),}, 725 }; 726 727 DRIVER_MODULE(umass, uhub, umass_driver, NULL, NULL); 728 MODULE_DEPEND(umass, usb, 1, 1, 1); 729 MODULE_DEPEND(umass, cam, 1, 1, 1); 730 MODULE_VERSION(umass, 1); 731 USB_PNP_HOST_INFO(umass_devs); 732 733 /* 734 * USB device probe/attach/detach 735 */ 736 737 static uint16_t 738 umass_get_proto(struct usb_interface *iface) 739 { 740 struct usb_interface_descriptor *id; 741 uint16_t retval; 742 743 retval = 0; 744 745 /* Check for a standards compliant device */ 746 id = usbd_get_interface_descriptor(iface); 747 if ((id == NULL) || 748 (id->bInterfaceClass != UICLASS_MASS)) { 749 goto done; 750 } 751 switch (id->bInterfaceSubClass) { 752 case UISUBCLASS_SCSI: 753 retval |= UMASS_PROTO_SCSI; 754 break; 755 case UISUBCLASS_UFI: 756 retval |= UMASS_PROTO_UFI; 757 break; 758 case UISUBCLASS_RBC: 759 retval |= UMASS_PROTO_RBC; 760 break; 761 case UISUBCLASS_SFF8020I: 762 case UISUBCLASS_SFF8070I: 763 retval |= UMASS_PROTO_ATAPI; 764 break; 765 default: 766 goto done; 767 } 768 769 switch (id->bInterfaceProtocol) { 770 case UIPROTO_MASS_CBI: 771 retval |= UMASS_PROTO_CBI; 772 break; 773 case UIPROTO_MASS_CBI_I: 774 retval |= UMASS_PROTO_CBI_I; 775 break; 776 case UIPROTO_MASS_BBB_OLD: 777 case UIPROTO_MASS_BBB: 778 retval |= UMASS_PROTO_BBB; 779 break; 780 default: 781 goto done; 782 } 783 done: 784 return (retval); 785 } 786 787 /* 788 * Match the device we are seeing with the devices supported. 789 */ 790 static struct umass_probe_proto 791 umass_probe_proto(device_t dev, struct usb_attach_arg *uaa) 792 { 793 struct umass_probe_proto ret; 794 uint32_t quirks = NO_QUIRKS; 795 uint32_t proto = umass_get_proto(uaa->iface); 796 797 memset(&ret, 0, sizeof(ret)); 798 ret.error = BUS_PROBE_GENERIC; 799 800 /* Check if we should deny probing. */ 801 if (usb_test_quirk(uaa, UQ_MSC_IGNORE)) { 802 ret.error = ENXIO; 803 goto done; 804 } 805 806 /* Search for protocol enforcement */ 807 808 if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_BBB)) { 809 proto &= ~UMASS_PROTO_WIRE; 810 proto |= UMASS_PROTO_BBB; 811 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI)) { 812 proto &= ~UMASS_PROTO_WIRE; 813 proto |= UMASS_PROTO_CBI; 814 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_WIRE_CBI_I)) { 815 proto &= ~UMASS_PROTO_WIRE; 816 proto |= UMASS_PROTO_CBI_I; 817 } 818 819 if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_SCSI)) { 820 proto &= ~UMASS_PROTO_COMMAND; 821 proto |= UMASS_PROTO_SCSI; 822 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_ATAPI)) { 823 proto &= ~UMASS_PROTO_COMMAND; 824 proto |= UMASS_PROTO_ATAPI; 825 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_UFI)) { 826 proto &= ~UMASS_PROTO_COMMAND; 827 proto |= UMASS_PROTO_UFI; 828 } else if (usb_test_quirk(uaa, UQ_MSC_FORCE_PROTO_RBC)) { 829 proto &= ~UMASS_PROTO_COMMAND; 830 proto |= UMASS_PROTO_RBC; 831 } 832 833 /* Check if the protocol is invalid */ 834 835 if ((proto & UMASS_PROTO_COMMAND) == 0) { 836 ret.error = ENXIO; 837 goto done; 838 } 839 840 if ((proto & UMASS_PROTO_WIRE) == 0) { 841 ret.error = ENXIO; 842 goto done; 843 } 844 845 /* Search for quirks */ 846 847 if (usb_test_quirk(uaa, UQ_MSC_NO_TEST_UNIT_READY)) 848 quirks |= NO_TEST_UNIT_READY; 849 if (usb_test_quirk(uaa, UQ_MSC_NO_RS_CLEAR_UA)) 850 quirks |= RS_NO_CLEAR_UA; 851 if (usb_test_quirk(uaa, UQ_MSC_NO_START_STOP)) 852 quirks |= NO_START_STOP; 853 if (usb_test_quirk(uaa, UQ_MSC_NO_GETMAXLUN)) 854 quirks |= NO_GETMAXLUN; 855 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY)) 856 quirks |= NO_INQUIRY; 857 if (usb_test_quirk(uaa, UQ_MSC_NO_INQUIRY_EVPD)) 858 quirks |= NO_INQUIRY_EVPD; 859 if (usb_test_quirk(uaa, UQ_MSC_NO_PREVENT_ALLOW)) 860 quirks |= NO_PREVENT_ALLOW; 861 if (usb_test_quirk(uaa, UQ_MSC_NO_SYNC_CACHE)) 862 quirks |= NO_SYNCHRONIZE_CACHE; 863 if (usb_test_quirk(uaa, UQ_MSC_SHUTTLE_INIT)) 864 quirks |= SHUTTLE_INIT; 865 if (usb_test_quirk(uaa, UQ_MSC_ALT_IFACE_1)) 866 quirks |= ALT_IFACE_1; 867 if (usb_test_quirk(uaa, UQ_MSC_FLOPPY_SPEED)) 868 quirks |= FLOPPY_SPEED; 869 if (usb_test_quirk(uaa, UQ_MSC_IGNORE_RESIDUE)) 870 quirks |= IGNORE_RESIDUE; 871 if (usb_test_quirk(uaa, UQ_MSC_WRONG_CSWSIG)) 872 quirks |= WRONG_CSWSIG; 873 if (usb_test_quirk(uaa, UQ_MSC_RBC_PAD_TO_12)) 874 quirks |= RBC_PAD_TO_12; 875 if (usb_test_quirk(uaa, UQ_MSC_READ_CAP_OFFBY1)) 876 quirks |= READ_CAPACITY_OFFBY1; 877 if (usb_test_quirk(uaa, UQ_MSC_FORCE_SHORT_INQ)) 878 quirks |= FORCE_SHORT_INQUIRY; 879 880 done: 881 ret.quirks = quirks; 882 ret.proto = proto; 883 return (ret); 884 } 885 886 static int 887 umass_probe(device_t dev) 888 { 889 struct usb_attach_arg *uaa = device_get_ivars(dev); 890 struct umass_probe_proto temp; 891 892 if (uaa->usb_mode != USB_MODE_HOST) { 893 return (ENXIO); 894 } 895 temp = umass_probe_proto(dev, uaa); 896 897 return (temp.error); 898 } 899 900 static int 901 umass_attach(device_t dev) 902 { 903 struct umass_softc *sc = device_get_softc(dev); 904 struct usb_attach_arg *uaa = device_get_ivars(dev); 905 struct umass_probe_proto temp = umass_probe_proto(dev, uaa); 906 struct usb_interface_descriptor *id; 907 int err; 908 909 /* 910 * NOTE: the softc struct is cleared in device_set_driver. 911 * We can safely call umass_detach without specifically 912 * initializing the struct. 913 */ 914 915 sc->sc_dev = dev; 916 sc->sc_udev = uaa->device; 917 sc->sc_proto = temp.proto; 918 sc->sc_quirks = temp.quirks; 919 sc->sc_unit = device_get_unit(dev); 920 921 snprintf(sc->sc_name, sizeof(sc->sc_name), 922 "%s", device_get_nameunit(dev)); 923 924 device_set_usb_desc(dev); 925 926 mtx_init(&sc->sc_mtx, device_get_nameunit(dev), 927 NULL, MTX_DEF | MTX_RECURSE); 928 929 /* get interface index */ 930 931 id = usbd_get_interface_descriptor(uaa->iface); 932 if (id == NULL) { 933 device_printf(dev, "failed to get " 934 "interface number\n"); 935 goto detach; 936 } 937 sc->sc_iface_no = id->bInterfaceNumber; 938 939 #ifdef USB_DEBUG 940 device_printf(dev, " "); 941 942 switch (sc->sc_proto & UMASS_PROTO_COMMAND) { 943 case UMASS_PROTO_SCSI: 944 printf("SCSI"); 945 break; 946 case UMASS_PROTO_ATAPI: 947 printf("8070i (ATAPI)"); 948 break; 949 case UMASS_PROTO_UFI: 950 printf("UFI"); 951 break; 952 case UMASS_PROTO_RBC: 953 printf("RBC"); 954 break; 955 default: 956 printf("(unknown 0x%02x)", 957 sc->sc_proto & UMASS_PROTO_COMMAND); 958 break; 959 } 960 961 printf(" over "); 962 963 switch (sc->sc_proto & UMASS_PROTO_WIRE) { 964 case UMASS_PROTO_BBB: 965 printf("Bulk-Only"); 966 break; 967 case UMASS_PROTO_CBI: /* uses Comand/Bulk pipes */ 968 printf("CBI"); 969 break; 970 case UMASS_PROTO_CBI_I: /* uses Comand/Bulk/Interrupt pipes */ 971 printf("CBI with CCI"); 972 break; 973 default: 974 printf("(unknown 0x%02x)", 975 sc->sc_proto & UMASS_PROTO_WIRE); 976 } 977 978 printf("; quirks = 0x%b\n", sc->sc_quirks, UMASS_QUIRKS_STRING); 979 #endif 980 981 if (sc->sc_quirks & ALT_IFACE_1) { 982 err = usbd_set_alt_interface_index 983 (uaa->device, uaa->info.bIfaceIndex, 1); 984 985 if (err) { 986 DPRINTF(sc, UDMASS_USB, "could not switch to " 987 "Alt Interface 1\n"); 988 goto detach; 989 } 990 } 991 /* allocate all required USB transfers */ 992 993 if (sc->sc_proto & UMASS_PROTO_BBB) { 994 err = usbd_transfer_setup(uaa->device, 995 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_bbb_config, 996 UMASS_T_BBB_MAX, sc, &sc->sc_mtx); 997 998 /* skip reset first time */ 999 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1000 1001 } else if (sc->sc_proto & (UMASS_PROTO_CBI | UMASS_PROTO_CBI_I)) { 1002 err = usbd_transfer_setup(uaa->device, 1003 &uaa->info.bIfaceIndex, sc->sc_xfer, umass_cbi_config, 1004 UMASS_T_CBI_MAX, sc, &sc->sc_mtx); 1005 1006 /* skip reset first time */ 1007 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1008 1009 } else { 1010 err = USB_ERR_INVAL; 1011 } 1012 1013 if (err) { 1014 device_printf(dev, "could not setup required " 1015 "transfers, %s\n", usbd_errstr(err)); 1016 goto detach; 1017 } 1018 #ifdef USB_DEBUG 1019 if (umass_throttle > 0) { 1020 uint8_t x; 1021 int iv; 1022 1023 iv = umass_throttle; 1024 1025 if (iv < 1) 1026 iv = 1; 1027 else if (iv > 8000) 1028 iv = 8000; 1029 1030 for (x = 0; x != UMASS_T_MAX; x++) { 1031 if (sc->sc_xfer[x] != NULL) 1032 usbd_xfer_set_interval(sc->sc_xfer[x], iv); 1033 } 1034 } 1035 #endif 1036 sc->sc_transform = 1037 (sc->sc_proto & UMASS_PROTO_SCSI) ? &umass_scsi_transform : 1038 (sc->sc_proto & UMASS_PROTO_UFI) ? &umass_ufi_transform : 1039 (sc->sc_proto & UMASS_PROTO_ATAPI) ? &umass_atapi_transform : 1040 (sc->sc_proto & UMASS_PROTO_RBC) ? &umass_rbc_transform : 1041 &umass_no_transform; 1042 1043 /* from here onwards the device can be used. */ 1044 1045 if (sc->sc_quirks & SHUTTLE_INIT) { 1046 umass_init_shuttle(sc); 1047 } 1048 /* get the maximum LUN supported by the device */ 1049 1050 if (((sc->sc_proto & UMASS_PROTO_WIRE) == UMASS_PROTO_BBB) && 1051 !(sc->sc_quirks & NO_GETMAXLUN)) 1052 sc->sc_maxlun = umass_bbb_get_max_lun(sc); 1053 else 1054 sc->sc_maxlun = 0; 1055 1056 /* Prepare the SCSI command block */ 1057 sc->cam_scsi_sense.opcode = REQUEST_SENSE; 1058 sc->cam_scsi_test_unit_ready.opcode = TEST_UNIT_READY; 1059 1060 /* register the SIM */ 1061 err = umass_cam_attach_sim(sc); 1062 if (err) { 1063 goto detach; 1064 } 1065 /* scan the SIM */ 1066 umass_cam_attach(sc); 1067 1068 DPRINTF(sc, UDMASS_GEN, "Attach finished\n"); 1069 1070 return (0); /* success */ 1071 1072 detach: 1073 umass_detach(dev); 1074 return (ENXIO); /* failure */ 1075 } 1076 1077 static int 1078 umass_detach(device_t dev) 1079 { 1080 struct umass_softc *sc = device_get_softc(dev); 1081 1082 DPRINTF(sc, UDMASS_USB, "\n"); 1083 1084 /* teardown our statemachine */ 1085 1086 usbd_transfer_unsetup(sc->sc_xfer, UMASS_T_MAX); 1087 1088 mtx_lock(&sc->sc_mtx); 1089 1090 /* cancel any leftover CCB's */ 1091 1092 umass_cancel_ccb(sc); 1093 1094 umass_cam_detach_sim(sc); 1095 1096 mtx_unlock(&sc->sc_mtx); 1097 1098 mtx_destroy(&sc->sc_mtx); 1099 1100 return (0); /* success */ 1101 } 1102 1103 static void 1104 umass_init_shuttle(struct umass_softc *sc) 1105 { 1106 struct usb_device_request req; 1107 uint8_t status[2] = {0, 0}; 1108 1109 /* 1110 * The Linux driver does this, but no one can tell us what the 1111 * command does. 1112 */ 1113 req.bmRequestType = UT_READ_VENDOR_DEVICE; 1114 req.bRequest = 1; /* XXX unknown command */ 1115 USETW(req.wValue, 0); 1116 req.wIndex[0] = sc->sc_iface_no; 1117 req.wIndex[1] = 0; 1118 USETW(req.wLength, sizeof(status)); 1119 usbd_do_request(sc->sc_udev, NULL, &req, &status); 1120 1121 DPRINTF(sc, UDMASS_GEN, "Shuttle init returned 0x%02x%02x\n", 1122 status[0], status[1]); 1123 } 1124 1125 /* 1126 * Generic functions to handle transfers 1127 */ 1128 1129 static void 1130 umass_transfer_start(struct umass_softc *sc, uint8_t xfer_index) 1131 { 1132 DPRINTF(sc, UDMASS_GEN, "transfer index = " 1133 "%d\n", xfer_index); 1134 1135 if (sc->sc_xfer[xfer_index]) { 1136 sc->sc_last_xfer_index = xfer_index; 1137 usbd_transfer_start(sc->sc_xfer[xfer_index]); 1138 } else { 1139 umass_cancel_ccb(sc); 1140 } 1141 } 1142 1143 static void 1144 umass_reset(struct umass_softc *sc) 1145 { 1146 DPRINTF(sc, UDMASS_GEN, "resetting device\n"); 1147 1148 /* 1149 * stop the last transfer, if not already stopped: 1150 */ 1151 usbd_transfer_stop(sc->sc_xfer[sc->sc_last_xfer_index]); 1152 umass_transfer_start(sc, 0); 1153 } 1154 1155 static void 1156 umass_cancel_ccb(struct umass_softc *sc) 1157 { 1158 union ccb *ccb; 1159 1160 USB_MTX_ASSERT(&sc->sc_mtx, MA_OWNED); 1161 1162 ccb = sc->sc_transfer.ccb; 1163 sc->sc_transfer.ccb = NULL; 1164 sc->sc_last_xfer_index = 0; 1165 1166 if (ccb) { 1167 (sc->sc_transfer.callback) 1168 (sc, ccb, (sc->sc_transfer.data_len - 1169 sc->sc_transfer.actlen), STATUS_WIRE_FAILED); 1170 } 1171 } 1172 1173 static void 1174 umass_tr_error(struct usb_xfer *xfer, usb_error_t error) 1175 { 1176 struct umass_softc *sc = usbd_xfer_softc(xfer); 1177 1178 if (error != USB_ERR_CANCELLED) { 1179 DPRINTF(sc, UDMASS_GEN, "transfer error, %s -> " 1180 "reset\n", usbd_errstr(error)); 1181 } 1182 umass_cancel_ccb(sc); 1183 } 1184 1185 /* 1186 * BBB protocol specific functions 1187 */ 1188 1189 static void 1190 umass_t_bbb_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1191 { 1192 struct umass_softc *sc = usbd_xfer_softc(xfer); 1193 struct usb_device_request req; 1194 struct usb_page_cache *pc; 1195 1196 switch (USB_GET_STATE(xfer)) { 1197 case USB_ST_TRANSFERRED: 1198 umass_transfer_start(sc, UMASS_T_BBB_RESET2); 1199 return; 1200 1201 case USB_ST_SETUP: 1202 /* 1203 * Reset recovery (5.3.4 in Universal Serial Bus Mass Storage Class) 1204 * 1205 * For Reset Recovery the host shall issue in the following order: 1206 * a) a Bulk-Only Mass Storage Reset 1207 * b) a Clear Feature HALT to the Bulk-In endpoint 1208 * c) a Clear Feature HALT to the Bulk-Out endpoint 1209 * 1210 * This is done in 3 steps, using 3 transfers: 1211 * UMASS_T_BBB_RESET1 1212 * UMASS_T_BBB_RESET2 1213 * UMASS_T_BBB_RESET3 1214 */ 1215 1216 DPRINTF(sc, UDMASS_BBB, "BBB reset!\n"); 1217 1218 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1219 req.bRequest = UR_BBB_RESET; /* bulk only reset */ 1220 USETW(req.wValue, 0); 1221 req.wIndex[0] = sc->sc_iface_no; 1222 req.wIndex[1] = 0; 1223 USETW(req.wLength, 0); 1224 1225 pc = usbd_xfer_get_frame(xfer, 0); 1226 usbd_copy_in(pc, 0, &req, sizeof(req)); 1227 1228 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1229 usbd_xfer_set_frames(xfer, 1); 1230 usbd_transfer_submit(xfer); 1231 return; 1232 1233 default: /* Error */ 1234 umass_tr_error(xfer, error); 1235 return; 1236 } 1237 } 1238 1239 static void 1240 umass_t_bbb_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1241 { 1242 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_RESET3, 1243 UMASS_T_BBB_DATA_READ, error); 1244 } 1245 1246 static void 1247 umass_t_bbb_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1248 { 1249 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_COMMAND, 1250 UMASS_T_BBB_DATA_WRITE, error); 1251 } 1252 1253 static void 1254 umass_t_bbb_data_clear_stall_callback(struct usb_xfer *xfer, 1255 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1256 { 1257 struct umass_softc *sc = usbd_xfer_softc(xfer); 1258 1259 switch (USB_GET_STATE(xfer)) { 1260 case USB_ST_TRANSFERRED: 1261 tr_transferred: 1262 umass_transfer_start(sc, next_xfer); 1263 return; 1264 1265 case USB_ST_SETUP: 1266 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1267 goto tr_transferred; 1268 } 1269 return; 1270 1271 default: /* Error */ 1272 umass_tr_error(xfer, error); 1273 return; 1274 } 1275 } 1276 1277 static void 1278 umass_t_bbb_command_callback(struct usb_xfer *xfer, usb_error_t error) 1279 { 1280 struct umass_softc *sc = usbd_xfer_softc(xfer); 1281 union ccb *ccb = sc->sc_transfer.ccb; 1282 struct usb_page_cache *pc; 1283 uint32_t tag; 1284 1285 switch (USB_GET_STATE(xfer)) { 1286 case USB_ST_TRANSFERRED: 1287 umass_transfer_start 1288 (sc, ((sc->sc_transfer.dir == DIR_IN) ? UMASS_T_BBB_DATA_READ : 1289 (sc->sc_transfer.dir == DIR_OUT) ? UMASS_T_BBB_DATA_WRITE : 1290 UMASS_T_BBB_STATUS)); 1291 return; 1292 1293 case USB_ST_SETUP: 1294 1295 sc->sc_status_try = 0; 1296 1297 if (ccb) { 1298 /* 1299 * the initial value is not important, 1300 * as long as the values are unique: 1301 */ 1302 tag = UGETDW(sc->cbw.dCBWTag) + 1; 1303 1304 USETDW(sc->cbw.dCBWSignature, CBWSIGNATURE); 1305 USETDW(sc->cbw.dCBWTag, tag); 1306 1307 /* 1308 * dCBWDataTransferLength: 1309 * This field indicates the number of bytes of data that the host 1310 * intends to transfer on the IN or OUT Bulk endpoint(as indicated by 1311 * the Direction bit) during the execution of this command. If this 1312 * field is set to 0, the device will expect that no data will be 1313 * transferred IN or OUT during this command, regardless of the value 1314 * of the Direction bit defined in dCBWFlags. 1315 */ 1316 USETDW(sc->cbw.dCBWDataTransferLength, sc->sc_transfer.data_len); 1317 1318 /* 1319 * dCBWFlags: 1320 * The bits of the Flags field are defined as follows: 1321 * Bits 0-6 reserved 1322 * Bit 7 Direction - this bit shall be ignored if the 1323 * dCBWDataTransferLength field is zero. 1324 * 0 = data Out from host to device 1325 * 1 = data In from device to host 1326 */ 1327 sc->cbw.bCBWFlags = ((sc->sc_transfer.dir == DIR_IN) ? 1328 CBWFLAGS_IN : CBWFLAGS_OUT); 1329 sc->cbw.bCBWLUN = sc->sc_transfer.lun; 1330 1331 if (sc->sc_transfer.cmd_len > sizeof(sc->cbw.CBWCDB)) { 1332 sc->sc_transfer.cmd_len = sizeof(sc->cbw.CBWCDB); 1333 DPRINTF(sc, UDMASS_BBB, "Truncating long command!\n"); 1334 } 1335 sc->cbw.bCDBLength = sc->sc_transfer.cmd_len; 1336 1337 /* copy SCSI command data */ 1338 memcpy(sc->cbw.CBWCDB, sc->sc_transfer.cmd_data, 1339 sc->sc_transfer.cmd_len); 1340 1341 /* clear remaining command area */ 1342 memset(sc->cbw.CBWCDB + 1343 sc->sc_transfer.cmd_len, 0, 1344 sizeof(sc->cbw.CBWCDB) - 1345 sc->sc_transfer.cmd_len); 1346 1347 DIF(UDMASS_BBB, umass_bbb_dump_cbw(sc, &sc->cbw)); 1348 1349 pc = usbd_xfer_get_frame(xfer, 0); 1350 usbd_copy_in(pc, 0, &sc->cbw, sizeof(sc->cbw)); 1351 usbd_xfer_set_frame_len(xfer, 0, sizeof(sc->cbw)); 1352 1353 usbd_transfer_submit(xfer); 1354 } 1355 return; 1356 1357 default: /* Error */ 1358 umass_tr_error(xfer, error); 1359 return; 1360 } 1361 } 1362 1363 static void 1364 umass_t_bbb_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1365 { 1366 struct umass_softc *sc = usbd_xfer_softc(xfer); 1367 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1368 int actlen, sumlen; 1369 1370 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1371 1372 switch (USB_GET_STATE(xfer)) { 1373 case USB_ST_TRANSFERRED: 1374 sc->sc_transfer.data_rem -= actlen; 1375 sc->sc_transfer.data_ptr += actlen; 1376 sc->sc_transfer.actlen += actlen; 1377 1378 if (actlen < sumlen) { 1379 /* short transfer */ 1380 sc->sc_transfer.data_rem = 0; 1381 } 1382 case USB_ST_SETUP: 1383 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1384 max_bulk, sc->sc_transfer.data_rem); 1385 1386 if (sc->sc_transfer.data_rem == 0) { 1387 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1388 return; 1389 } 1390 if (max_bulk > sc->sc_transfer.data_rem) { 1391 max_bulk = sc->sc_transfer.data_rem; 1392 } 1393 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1394 1395 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1396 max_bulk); 1397 1398 usbd_transfer_submit(xfer); 1399 return; 1400 1401 default: /* Error */ 1402 if (error == USB_ERR_CANCELLED) { 1403 umass_tr_error(xfer, error); 1404 } else { 1405 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1406 } 1407 return; 1408 } 1409 } 1410 1411 static void 1412 umass_t_bbb_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1413 { 1414 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1415 UMASS_T_BBB_DATA_READ, error); 1416 } 1417 1418 static void 1419 umass_t_bbb_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1420 { 1421 struct umass_softc *sc = usbd_xfer_softc(xfer); 1422 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1423 int actlen, sumlen; 1424 1425 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1426 1427 switch (USB_GET_STATE(xfer)) { 1428 case USB_ST_TRANSFERRED: 1429 sc->sc_transfer.data_rem -= actlen; 1430 sc->sc_transfer.data_ptr += actlen; 1431 sc->sc_transfer.actlen += actlen; 1432 1433 if (actlen < sumlen) { 1434 /* short transfer */ 1435 sc->sc_transfer.data_rem = 0; 1436 } 1437 case USB_ST_SETUP: 1438 DPRINTF(sc, UDMASS_BBB, "max_bulk=%d, data_rem=%d\n", 1439 max_bulk, sc->sc_transfer.data_rem); 1440 1441 if (sc->sc_transfer.data_rem == 0) { 1442 umass_transfer_start(sc, UMASS_T_BBB_STATUS); 1443 return; 1444 } 1445 if (max_bulk > sc->sc_transfer.data_rem) { 1446 max_bulk = sc->sc_transfer.data_rem; 1447 } 1448 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1449 1450 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1451 max_bulk); 1452 1453 usbd_transfer_submit(xfer); 1454 return; 1455 1456 default: /* Error */ 1457 if (error == USB_ERR_CANCELLED) { 1458 umass_tr_error(xfer, error); 1459 } else { 1460 umass_transfer_start(sc, UMASS_T_BBB_DATA_WR_CS); 1461 } 1462 return; 1463 } 1464 } 1465 1466 static void 1467 umass_t_bbb_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1468 { 1469 umass_t_bbb_data_clear_stall_callback(xfer, UMASS_T_BBB_STATUS, 1470 UMASS_T_BBB_DATA_WRITE, error); 1471 } 1472 1473 static void 1474 umass_t_bbb_status_callback(struct usb_xfer *xfer, usb_error_t error) 1475 { 1476 struct umass_softc *sc = usbd_xfer_softc(xfer); 1477 union ccb *ccb = sc->sc_transfer.ccb; 1478 struct usb_page_cache *pc; 1479 uint32_t residue; 1480 int actlen; 1481 1482 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1483 1484 switch (USB_GET_STATE(xfer)) { 1485 case USB_ST_TRANSFERRED: 1486 1487 /* 1488 * Do a full reset if there is something wrong with the CSW: 1489 */ 1490 sc->sc_status_try = 1; 1491 1492 /* Zero missing parts of the CSW: */ 1493 1494 if (actlen < (int)sizeof(sc->csw)) 1495 memset(&sc->csw, 0, sizeof(sc->csw)); 1496 1497 pc = usbd_xfer_get_frame(xfer, 0); 1498 usbd_copy_out(pc, 0, &sc->csw, actlen); 1499 1500 DIF(UDMASS_BBB, umass_bbb_dump_csw(sc, &sc->csw)); 1501 1502 residue = UGETDW(sc->csw.dCSWDataResidue); 1503 1504 if ((!residue) || (sc->sc_quirks & IGNORE_RESIDUE)) { 1505 residue = (sc->sc_transfer.data_len - 1506 sc->sc_transfer.actlen); 1507 } 1508 if (residue > sc->sc_transfer.data_len) { 1509 DPRINTF(sc, UDMASS_BBB, "truncating residue from %d " 1510 "to %d bytes\n", residue, sc->sc_transfer.data_len); 1511 residue = sc->sc_transfer.data_len; 1512 } 1513 /* translate weird command-status signatures: */ 1514 if (sc->sc_quirks & WRONG_CSWSIG) { 1515 uint32_t temp = UGETDW(sc->csw.dCSWSignature); 1516 1517 if ((temp == CSWSIGNATURE_OLYMPUS_C1) || 1518 (temp == CSWSIGNATURE_IMAGINATION_DBX1)) { 1519 USETDW(sc->csw.dCSWSignature, CSWSIGNATURE); 1520 } 1521 } 1522 /* check CSW and handle eventual error */ 1523 if (UGETDW(sc->csw.dCSWSignature) != CSWSIGNATURE) { 1524 DPRINTF(sc, UDMASS_BBB, "bad CSW signature 0x%08x != 0x%08x\n", 1525 UGETDW(sc->csw.dCSWSignature), CSWSIGNATURE); 1526 /* 1527 * Invalid CSW: Wrong signature or wrong tag might 1528 * indicate that we lost synchronization. Reset the 1529 * device. 1530 */ 1531 goto tr_error; 1532 } else if (UGETDW(sc->csw.dCSWTag) != UGETDW(sc->cbw.dCBWTag)) { 1533 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: tag 0x%08x should be " 1534 "0x%08x\n", UGETDW(sc->csw.dCSWTag), 1535 UGETDW(sc->cbw.dCBWTag)); 1536 goto tr_error; 1537 } else if (sc->csw.bCSWStatus > CSWSTATUS_PHASE) { 1538 DPRINTF(sc, UDMASS_BBB, "Invalid CSW: status %d > %d\n", 1539 sc->csw.bCSWStatus, CSWSTATUS_PHASE); 1540 goto tr_error; 1541 } else if (sc->csw.bCSWStatus == CSWSTATUS_PHASE) { 1542 DPRINTF(sc, UDMASS_BBB, "Phase error, residue = " 1543 "%d\n", residue); 1544 goto tr_error; 1545 } else if (sc->sc_transfer.actlen > sc->sc_transfer.data_len) { 1546 DPRINTF(sc, UDMASS_BBB, "Buffer overrun %d > %d\n", 1547 sc->sc_transfer.actlen, sc->sc_transfer.data_len); 1548 goto tr_error; 1549 } else if (sc->csw.bCSWStatus == CSWSTATUS_FAILED) { 1550 DPRINTF(sc, UDMASS_BBB, "Command failed, residue = " 1551 "%d\n", residue); 1552 1553 sc->sc_transfer.ccb = NULL; 1554 1555 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1556 1557 (sc->sc_transfer.callback) 1558 (sc, ccb, residue, STATUS_CMD_FAILED); 1559 } else { 1560 sc->sc_transfer.ccb = NULL; 1561 1562 sc->sc_last_xfer_index = UMASS_T_BBB_COMMAND; 1563 1564 (sc->sc_transfer.callback) 1565 (sc, ccb, residue, STATUS_CMD_OK); 1566 } 1567 return; 1568 1569 case USB_ST_SETUP: 1570 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 1571 usbd_transfer_submit(xfer); 1572 return; 1573 1574 default: 1575 tr_error: 1576 DPRINTF(sc, UDMASS_BBB, "Failed to read CSW: %s, try %d\n", 1577 usbd_errstr(error), sc->sc_status_try); 1578 1579 if ((error == USB_ERR_CANCELLED) || 1580 (sc->sc_status_try)) { 1581 umass_tr_error(xfer, error); 1582 } else { 1583 sc->sc_status_try = 1; 1584 umass_transfer_start(sc, UMASS_T_BBB_DATA_RD_CS); 1585 } 1586 return; 1587 } 1588 } 1589 1590 static void 1591 umass_command_start(struct umass_softc *sc, uint8_t dir, 1592 void *data_ptr, uint32_t data_len, 1593 uint32_t data_timeout, umass_callback_t *callback, 1594 union ccb *ccb) 1595 { 1596 sc->sc_transfer.lun = ccb->ccb_h.target_lun; 1597 1598 /* 1599 * NOTE: assumes that "sc->sc_transfer.cmd_data" and 1600 * "sc->sc_transfer.cmd_len" has been properly 1601 * initialized. 1602 */ 1603 1604 sc->sc_transfer.dir = data_len ? dir : DIR_NONE; 1605 sc->sc_transfer.data_ptr = data_ptr; 1606 sc->sc_transfer.data_len = data_len; 1607 sc->sc_transfer.data_rem = data_len; 1608 sc->sc_transfer.data_timeout = (data_timeout + UMASS_TIMEOUT); 1609 1610 sc->sc_transfer.actlen = 0; 1611 sc->sc_transfer.callback = callback; 1612 sc->sc_transfer.ccb = ccb; 1613 1614 if (sc->sc_xfer[sc->sc_last_xfer_index]) { 1615 usbd_transfer_start(sc->sc_xfer[sc->sc_last_xfer_index]); 1616 } else { 1617 umass_cancel_ccb(sc); 1618 } 1619 } 1620 1621 static uint8_t 1622 umass_bbb_get_max_lun(struct umass_softc *sc) 1623 { 1624 struct usb_device_request req; 1625 usb_error_t err; 1626 uint8_t buf = 0; 1627 1628 /* The Get Max Lun command is a class-specific request. */ 1629 req.bmRequestType = UT_READ_CLASS_INTERFACE; 1630 req.bRequest = UR_BBB_GET_MAX_LUN; 1631 USETW(req.wValue, 0); 1632 req.wIndex[0] = sc->sc_iface_no; 1633 req.wIndex[1] = 0; 1634 USETW(req.wLength, 1); 1635 1636 err = usbd_do_request(sc->sc_udev, NULL, &req, &buf); 1637 if (err) { 1638 buf = 0; 1639 1640 /* Device doesn't support Get Max Lun request. */ 1641 printf("%s: Get Max Lun not supported (%s)\n", 1642 sc->sc_name, usbd_errstr(err)); 1643 } 1644 return (buf); 1645 } 1646 1647 /* 1648 * Command/Bulk/Interrupt (CBI) specific functions 1649 */ 1650 1651 static void 1652 umass_cbi_start_status(struct umass_softc *sc) 1653 { 1654 if (sc->sc_xfer[UMASS_T_CBI_STATUS]) { 1655 umass_transfer_start(sc, UMASS_T_CBI_STATUS); 1656 } else { 1657 union ccb *ccb = sc->sc_transfer.ccb; 1658 1659 sc->sc_transfer.ccb = NULL; 1660 1661 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1662 1663 (sc->sc_transfer.callback) 1664 (sc, ccb, (sc->sc_transfer.data_len - 1665 sc->sc_transfer.actlen), STATUS_CMD_UNKNOWN); 1666 } 1667 } 1668 1669 static void 1670 umass_t_cbi_reset1_callback(struct usb_xfer *xfer, usb_error_t error) 1671 { 1672 struct umass_softc *sc = usbd_xfer_softc(xfer); 1673 struct usb_device_request req; 1674 struct usb_page_cache *pc; 1675 uint8_t buf[UMASS_CBI_DIAGNOSTIC_CMDLEN]; 1676 1677 uint8_t i; 1678 1679 switch (USB_GET_STATE(xfer)) { 1680 case USB_ST_TRANSFERRED: 1681 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1682 break; 1683 1684 case USB_ST_SETUP: 1685 /* 1686 * Command Block Reset Protocol 1687 * 1688 * First send a reset request to the device. Then clear 1689 * any possibly stalled bulk endpoints. 1690 * 1691 * This is done in 3 steps, using 3 transfers: 1692 * UMASS_T_CBI_RESET1 1693 * UMASS_T_CBI_RESET2 1694 * UMASS_T_CBI_RESET3 1695 * UMASS_T_CBI_RESET4 (only if there is an interrupt endpoint) 1696 */ 1697 1698 DPRINTF(sc, UDMASS_CBI, "CBI reset!\n"); 1699 1700 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1701 req.bRequest = UR_CBI_ADSC; 1702 USETW(req.wValue, 0); 1703 req.wIndex[0] = sc->sc_iface_no; 1704 req.wIndex[1] = 0; 1705 USETW(req.wLength, UMASS_CBI_DIAGNOSTIC_CMDLEN); 1706 1707 /* 1708 * The 0x1d code is the SEND DIAGNOSTIC command. To 1709 * distinguish between the two, the last 10 bytes of the CBL 1710 * is filled with 0xff (section 2.2 of the CBI 1711 * specification) 1712 */ 1713 buf[0] = 0x1d; /* Command Block Reset */ 1714 buf[1] = 0x04; 1715 1716 for (i = 2; i < UMASS_CBI_DIAGNOSTIC_CMDLEN; i++) { 1717 buf[i] = 0xff; 1718 } 1719 1720 pc = usbd_xfer_get_frame(xfer, 0); 1721 usbd_copy_in(pc, 0, &req, sizeof(req)); 1722 pc = usbd_xfer_get_frame(xfer, 1); 1723 usbd_copy_in(pc, 0, buf, sizeof(buf)); 1724 1725 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1726 usbd_xfer_set_frame_len(xfer, 1, sizeof(buf)); 1727 usbd_xfer_set_frames(xfer, 2); 1728 usbd_transfer_submit(xfer); 1729 break; 1730 1731 default: /* Error */ 1732 if (error == USB_ERR_CANCELLED) 1733 umass_tr_error(xfer, error); 1734 else 1735 umass_transfer_start(sc, UMASS_T_CBI_RESET2); 1736 break; 1737 } 1738 } 1739 1740 static void 1741 umass_t_cbi_reset2_callback(struct usb_xfer *xfer, usb_error_t error) 1742 { 1743 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_RESET3, 1744 UMASS_T_CBI_DATA_READ, error); 1745 } 1746 1747 static void 1748 umass_t_cbi_reset3_callback(struct usb_xfer *xfer, usb_error_t error) 1749 { 1750 struct umass_softc *sc = usbd_xfer_softc(xfer); 1751 1752 umass_t_cbi_data_clear_stall_callback 1753 (xfer, (sc->sc_xfer[UMASS_T_CBI_RESET4] && 1754 sc->sc_xfer[UMASS_T_CBI_STATUS]) ? 1755 UMASS_T_CBI_RESET4 : UMASS_T_CBI_COMMAND, 1756 UMASS_T_CBI_DATA_WRITE, error); 1757 } 1758 1759 static void 1760 umass_t_cbi_reset4_callback(struct usb_xfer *xfer, usb_error_t error) 1761 { 1762 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_COMMAND, 1763 UMASS_T_CBI_STATUS, error); 1764 } 1765 1766 static void 1767 umass_t_cbi_data_clear_stall_callback(struct usb_xfer *xfer, 1768 uint8_t next_xfer, uint8_t stall_xfer, usb_error_t error) 1769 { 1770 struct umass_softc *sc = usbd_xfer_softc(xfer); 1771 1772 switch (USB_GET_STATE(xfer)) { 1773 case USB_ST_TRANSFERRED: 1774 tr_transferred: 1775 if (next_xfer == UMASS_T_CBI_STATUS) { 1776 umass_cbi_start_status(sc); 1777 } else { 1778 umass_transfer_start(sc, next_xfer); 1779 } 1780 break; 1781 1782 case USB_ST_SETUP: 1783 if (usbd_clear_stall_callback(xfer, sc->sc_xfer[stall_xfer])) { 1784 goto tr_transferred; /* should not happen */ 1785 } 1786 break; 1787 1788 default: /* Error */ 1789 umass_tr_error(xfer, error); 1790 break; 1791 } 1792 } 1793 1794 static void 1795 umass_t_cbi_command_callback(struct usb_xfer *xfer, usb_error_t error) 1796 { 1797 struct umass_softc *sc = usbd_xfer_softc(xfer); 1798 union ccb *ccb = sc->sc_transfer.ccb; 1799 struct usb_device_request req; 1800 struct usb_page_cache *pc; 1801 1802 switch (USB_GET_STATE(xfer)) { 1803 case USB_ST_TRANSFERRED: 1804 1805 if (sc->sc_transfer.dir == DIR_NONE) { 1806 umass_cbi_start_status(sc); 1807 } else { 1808 umass_transfer_start 1809 (sc, (sc->sc_transfer.dir == DIR_IN) ? 1810 UMASS_T_CBI_DATA_READ : UMASS_T_CBI_DATA_WRITE); 1811 } 1812 break; 1813 1814 case USB_ST_SETUP: 1815 1816 if (ccb) { 1817 /* 1818 * do a CBI transfer with cmd_len bytes from 1819 * cmd_data, possibly a data phase of data_len 1820 * bytes from/to the device and finally a status 1821 * read phase. 1822 */ 1823 1824 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 1825 req.bRequest = UR_CBI_ADSC; 1826 USETW(req.wValue, 0); 1827 req.wIndex[0] = sc->sc_iface_no; 1828 req.wIndex[1] = 0; 1829 req.wLength[0] = sc->sc_transfer.cmd_len; 1830 req.wLength[1] = 0; 1831 1832 pc = usbd_xfer_get_frame(xfer, 0); 1833 usbd_copy_in(pc, 0, &req, sizeof(req)); 1834 pc = usbd_xfer_get_frame(xfer, 1); 1835 usbd_copy_in(pc, 0, sc->sc_transfer.cmd_data, 1836 sc->sc_transfer.cmd_len); 1837 1838 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 1839 usbd_xfer_set_frame_len(xfer, 1, sc->sc_transfer.cmd_len); 1840 usbd_xfer_set_frames(xfer, 1841 sc->sc_transfer.cmd_len ? 2 : 1); 1842 1843 DIF(UDMASS_CBI, 1844 umass_cbi_dump_cmd(sc, 1845 sc->sc_transfer.cmd_data, 1846 sc->sc_transfer.cmd_len)); 1847 1848 usbd_transfer_submit(xfer); 1849 } 1850 break; 1851 1852 default: /* Error */ 1853 /* 1854 * STALL on the control pipe can be result of the command error. 1855 * Attempt to clear this STALL same as for bulk pipe also 1856 * results in command completion interrupt, but ASC/ASCQ there 1857 * look like not always valid, so don't bother about it. 1858 */ 1859 if ((error == USB_ERR_STALLED) || 1860 (sc->sc_transfer.callback == &umass_cam_cb)) { 1861 sc->sc_transfer.ccb = NULL; 1862 (sc->sc_transfer.callback) 1863 (sc, ccb, sc->sc_transfer.data_len, 1864 STATUS_CMD_UNKNOWN); 1865 } else { 1866 umass_tr_error(xfer, error); 1867 /* skip reset */ 1868 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 1869 } 1870 break; 1871 } 1872 } 1873 1874 static void 1875 umass_t_cbi_data_read_callback(struct usb_xfer *xfer, usb_error_t error) 1876 { 1877 struct umass_softc *sc = usbd_xfer_softc(xfer); 1878 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1879 int actlen, sumlen; 1880 1881 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1882 1883 switch (USB_GET_STATE(xfer)) { 1884 case USB_ST_TRANSFERRED: 1885 sc->sc_transfer.data_rem -= actlen; 1886 sc->sc_transfer.data_ptr += actlen; 1887 sc->sc_transfer.actlen += actlen; 1888 1889 if (actlen < sumlen) { 1890 /* short transfer */ 1891 sc->sc_transfer.data_rem = 0; 1892 } 1893 case USB_ST_SETUP: 1894 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1895 max_bulk, sc->sc_transfer.data_rem); 1896 1897 if (sc->sc_transfer.data_rem == 0) { 1898 umass_cbi_start_status(sc); 1899 break; 1900 } 1901 if (max_bulk > sc->sc_transfer.data_rem) { 1902 max_bulk = sc->sc_transfer.data_rem; 1903 } 1904 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1905 1906 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1907 max_bulk); 1908 1909 usbd_transfer_submit(xfer); 1910 break; 1911 1912 default: /* Error */ 1913 if ((error == USB_ERR_CANCELLED) || 1914 (sc->sc_transfer.callback != &umass_cam_cb)) { 1915 umass_tr_error(xfer, error); 1916 } else { 1917 umass_transfer_start(sc, UMASS_T_CBI_DATA_RD_CS); 1918 } 1919 break; 1920 } 1921 } 1922 1923 static void 1924 umass_t_cbi_data_rd_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1925 { 1926 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1927 UMASS_T_CBI_DATA_READ, error); 1928 } 1929 1930 static void 1931 umass_t_cbi_data_write_callback(struct usb_xfer *xfer, usb_error_t error) 1932 { 1933 struct umass_softc *sc = usbd_xfer_softc(xfer); 1934 uint32_t max_bulk = usbd_xfer_max_len(xfer); 1935 int actlen, sumlen; 1936 1937 usbd_xfer_status(xfer, &actlen, &sumlen, NULL, NULL); 1938 1939 switch (USB_GET_STATE(xfer)) { 1940 case USB_ST_TRANSFERRED: 1941 sc->sc_transfer.data_rem -= actlen; 1942 sc->sc_transfer.data_ptr += actlen; 1943 sc->sc_transfer.actlen += actlen; 1944 1945 if (actlen < sumlen) { 1946 /* short transfer */ 1947 sc->sc_transfer.data_rem = 0; 1948 } 1949 case USB_ST_SETUP: 1950 DPRINTF(sc, UDMASS_CBI, "max_bulk=%d, data_rem=%d\n", 1951 max_bulk, sc->sc_transfer.data_rem); 1952 1953 if (sc->sc_transfer.data_rem == 0) { 1954 umass_cbi_start_status(sc); 1955 break; 1956 } 1957 if (max_bulk > sc->sc_transfer.data_rem) { 1958 max_bulk = sc->sc_transfer.data_rem; 1959 } 1960 usbd_xfer_set_timeout(xfer, sc->sc_transfer.data_timeout); 1961 1962 usbd_xfer_set_frame_data(xfer, 0, sc->sc_transfer.data_ptr, 1963 max_bulk); 1964 1965 usbd_transfer_submit(xfer); 1966 break; 1967 1968 default: /* Error */ 1969 if ((error == USB_ERR_CANCELLED) || 1970 (sc->sc_transfer.callback != &umass_cam_cb)) { 1971 umass_tr_error(xfer, error); 1972 } else { 1973 umass_transfer_start(sc, UMASS_T_CBI_DATA_WR_CS); 1974 } 1975 break; 1976 } 1977 } 1978 1979 static void 1980 umass_t_cbi_data_wr_cs_callback(struct usb_xfer *xfer, usb_error_t error) 1981 { 1982 umass_t_cbi_data_clear_stall_callback(xfer, UMASS_T_CBI_STATUS, 1983 UMASS_T_CBI_DATA_WRITE, error); 1984 } 1985 1986 static void 1987 umass_t_cbi_status_callback(struct usb_xfer *xfer, usb_error_t error) 1988 { 1989 struct umass_softc *sc = usbd_xfer_softc(xfer); 1990 union ccb *ccb = sc->sc_transfer.ccb; 1991 struct usb_page_cache *pc; 1992 uint32_t residue; 1993 uint8_t status; 1994 int actlen; 1995 1996 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 1997 1998 switch (USB_GET_STATE(xfer)) { 1999 case USB_ST_TRANSFERRED: 2000 2001 if (actlen < (int)sizeof(sc->sbl)) { 2002 goto tr_setup; 2003 } 2004 pc = usbd_xfer_get_frame(xfer, 0); 2005 usbd_copy_out(pc, 0, &sc->sbl, sizeof(sc->sbl)); 2006 2007 residue = (sc->sc_transfer.data_len - 2008 sc->sc_transfer.actlen); 2009 2010 /* dissect the information in the buffer */ 2011 2012 if (sc->sc_proto & UMASS_PROTO_UFI) { 2013 /* 2014 * Section 3.4.3.1.3 specifies that the UFI command 2015 * protocol returns an ASC and ASCQ in the interrupt 2016 * data block. 2017 */ 2018 2019 DPRINTF(sc, UDMASS_CBI, "UFI CCI, ASC = 0x%02x, " 2020 "ASCQ = 0x%02x\n", sc->sbl.ufi.asc, 2021 sc->sbl.ufi.ascq); 2022 2023 status = (((sc->sbl.ufi.asc == 0) && 2024 (sc->sbl.ufi.ascq == 0)) ? 2025 STATUS_CMD_OK : STATUS_CMD_FAILED); 2026 2027 sc->sc_transfer.ccb = NULL; 2028 2029 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2030 2031 (sc->sc_transfer.callback) 2032 (sc, ccb, residue, status); 2033 2034 break; 2035 2036 } else { 2037 /* Command Interrupt Data Block */ 2038 2039 DPRINTF(sc, UDMASS_CBI, "type=0x%02x, value=0x%02x\n", 2040 sc->sbl.common.type, sc->sbl.common.value); 2041 2042 if (sc->sbl.common.type == IDB_TYPE_CCI) { 2043 status = (sc->sbl.common.value & IDB_VALUE_STATUS_MASK); 2044 2045 status = ((status == IDB_VALUE_PASS) ? STATUS_CMD_OK : 2046 (status == IDB_VALUE_FAIL) ? STATUS_CMD_FAILED : 2047 (status == IDB_VALUE_PERSISTENT) ? STATUS_CMD_FAILED : 2048 STATUS_WIRE_FAILED); 2049 2050 sc->sc_transfer.ccb = NULL; 2051 2052 sc->sc_last_xfer_index = UMASS_T_CBI_COMMAND; 2053 2054 (sc->sc_transfer.callback) 2055 (sc, ccb, residue, status); 2056 2057 break; 2058 } 2059 } 2060 2061 /* fallthrough */ 2062 2063 case USB_ST_SETUP: 2064 tr_setup: 2065 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 2066 usbd_transfer_submit(xfer); 2067 break; 2068 2069 default: /* Error */ 2070 DPRINTF(sc, UDMASS_CBI, "Failed to read CSW: %s\n", 2071 usbd_errstr(error)); 2072 umass_tr_error(xfer, error); 2073 break; 2074 } 2075 } 2076 2077 /* 2078 * CAM specific functions (used by SCSI, UFI, 8070i (ATAPI)) 2079 */ 2080 2081 static int 2082 umass_cam_attach_sim(struct umass_softc *sc) 2083 { 2084 struct cam_devq *devq; /* Per device Queue */ 2085 cam_status status; 2086 2087 /* 2088 * A HBA is attached to the CAM layer. 2089 * 2090 * The CAM layer will then after a while start probing for devices on 2091 * the bus. The number of SIMs is limited to one. 2092 */ 2093 2094 devq = cam_simq_alloc(1 /* maximum openings */ ); 2095 if (devq == NULL) { 2096 return (ENOMEM); 2097 } 2098 sc->sc_sim = cam_sim_alloc 2099 (&umass_cam_action, &umass_cam_poll, 2100 DEVNAME_SIM, 2101 sc /* priv */ , 2102 sc->sc_unit /* unit number */ , 2103 &sc->sc_mtx /* mutex */ , 2104 1 /* maximum device openings */ , 2105 0 /* maximum tagged device openings */ , 2106 devq); 2107 2108 if (sc->sc_sim == NULL) { 2109 cam_simq_free(devq); 2110 return (ENOMEM); 2111 } 2112 2113 mtx_lock(&sc->sc_mtx); 2114 status = xpt_bus_register(sc->sc_sim, sc->sc_dev, sc->sc_unit); 2115 if (status != CAM_SUCCESS) { 2116 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2117 mtx_unlock(&sc->sc_mtx); 2118 printf("%s: xpt_bus_register failed with status %#x\n", 2119 __func__, status); 2120 return (ENOMEM); 2121 } 2122 mtx_unlock(&sc->sc_mtx); 2123 2124 return (0); 2125 } 2126 2127 static void 2128 umass_cam_attach(struct umass_softc *sc) 2129 { 2130 #ifndef USB_DEBUG 2131 if (bootverbose) 2132 #endif 2133 printf("%s:%d:%d: Attached to scbus%d\n", 2134 sc->sc_name, cam_sim_path(sc->sc_sim), 2135 sc->sc_unit, cam_sim_path(sc->sc_sim)); 2136 } 2137 2138 /* umass_cam_detach 2139 * detach from the CAM layer 2140 */ 2141 2142 static void 2143 umass_cam_detach_sim(struct umass_softc *sc) 2144 { 2145 int error; 2146 2147 if (sc->sc_sim != NULL) { 2148 error = xpt_bus_deregister(cam_sim_path(sc->sc_sim)); 2149 if (error == 0) { 2150 /* accessing the softc is not possible after this */ 2151 sc->sc_sim->softc = NULL; 2152 DPRINTF(sc, UDMASS_SCSI, "%s: %s:%d:%d caling " 2153 "cam_sim_free sim %p refc %u mtx %p\n", 2154 __func__, sc->sc_name, cam_sim_path(sc->sc_sim), 2155 sc->sc_unit, sc->sc_sim, 2156 sc->sc_sim->refcount, sc->sc_sim->mtx); 2157 cam_sim_free(sc->sc_sim, /* free_devq */ TRUE); 2158 } else { 2159 panic("%s: %s: CAM layer is busy: errno %d\n", 2160 __func__, sc->sc_name, error); 2161 } 2162 sc->sc_sim = NULL; 2163 } 2164 } 2165 2166 /* umass_cam_action 2167 * CAM requests for action come through here 2168 */ 2169 2170 static void 2171 umass_cam_action(struct cam_sim *sim, union ccb *ccb) 2172 { 2173 struct umass_softc *sc = cam_sim_softc(sim); 2174 2175 if (sc == NULL) { 2176 ccb->ccb_h.status = CAM_SEL_TIMEOUT; 2177 xpt_done(ccb); 2178 return; 2179 } 2180 2181 /* Perform the requested action */ 2182 switch (ccb->ccb_h.func_code) { 2183 case XPT_SCSI_IO: 2184 { 2185 uint8_t *cmd; 2186 uint8_t dir; 2187 2188 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2189 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2190 } else { 2191 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2192 } 2193 2194 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2195 "cmd: 0x%02x, flags: 0x%02x, " 2196 "%db cmd/%db data/%db sense\n", 2197 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2198 (uintmax_t)ccb->ccb_h.target_lun, cmd[0], 2199 ccb->ccb_h.flags & CAM_DIR_MASK, ccb->csio.cdb_len, 2200 ccb->csio.dxfer_len, ccb->csio.sense_len); 2201 2202 if (sc->sc_transfer.ccb) { 2203 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SCSI_IO: " 2204 "I/O in progress, deferring\n", 2205 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2206 (uintmax_t)ccb->ccb_h.target_lun); 2207 ccb->ccb_h.status = CAM_SCSI_BUSY; 2208 xpt_done(ccb); 2209 goto done; 2210 } 2211 switch (ccb->ccb_h.flags & CAM_DIR_MASK) { 2212 case CAM_DIR_IN: 2213 dir = DIR_IN; 2214 break; 2215 case CAM_DIR_OUT: 2216 dir = DIR_OUT; 2217 DIF(UDMASS_SCSI, 2218 umass_dump_buffer(sc, ccb->csio.data_ptr, 2219 ccb->csio.dxfer_len, 48)); 2220 break; 2221 default: 2222 dir = DIR_NONE; 2223 } 2224 2225 ccb->ccb_h.status = CAM_REQ_INPROG | CAM_SIM_QUEUED; 2226 2227 /* 2228 * sc->sc_transform will convert the command to the 2229 * command format needed by the specific command set 2230 * and return the converted command in 2231 * "sc->sc_transfer.cmd_data" 2232 */ 2233 if (umass_std_transform(sc, ccb, cmd, ccb->csio.cdb_len)) { 2234 if (sc->sc_transfer.cmd_data[0] == INQUIRY) { 2235 const char *pserial; 2236 2237 pserial = usb_get_serial(sc->sc_udev); 2238 2239 /* 2240 * Umass devices don't generally report their serial numbers 2241 * in the usual SCSI way. Emulate it here. 2242 */ 2243 if ((sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2244 (sc->sc_transfer.cmd_data[2] == SVPD_UNIT_SERIAL_NUMBER) && 2245 (pserial[0] != '\0')) { 2246 struct scsi_vpd_unit_serial_number *vpd_serial; 2247 2248 vpd_serial = (struct scsi_vpd_unit_serial_number *)ccb->csio.data_ptr; 2249 vpd_serial->length = strlen(pserial); 2250 if (vpd_serial->length > sizeof(vpd_serial->serial_num)) 2251 vpd_serial->length = sizeof(vpd_serial->serial_num); 2252 memcpy(vpd_serial->serial_num, pserial, vpd_serial->length); 2253 ccb->csio.scsi_status = SCSI_STATUS_OK; 2254 ccb->ccb_h.status = CAM_REQ_CMP; 2255 xpt_done(ccb); 2256 goto done; 2257 } 2258 2259 /* 2260 * Handle EVPD inquiry for broken devices first 2261 * NO_INQUIRY also implies NO_INQUIRY_EVPD 2262 */ 2263 if ((sc->sc_quirks & (NO_INQUIRY_EVPD | NO_INQUIRY)) && 2264 (sc->sc_transfer.cmd_data[1] & SI_EVPD)) { 2265 scsi_set_sense_data(&ccb->csio.sense_data, 2266 /*sense_format*/ SSD_TYPE_NONE, 2267 /*current_error*/ 1, 2268 /*sense_key*/ SSD_KEY_ILLEGAL_REQUEST, 2269 /*asc*/ 0x24, /* 24h/00h INVALID FIELD IN CDB */ 2270 /*ascq*/ 0x00, 2271 /*extra args*/ SSD_ELEM_NONE); 2272 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2273 ccb->ccb_h.status = 2274 CAM_SCSI_STATUS_ERROR | 2275 CAM_AUTOSNS_VALID | 2276 CAM_DEV_QFRZN; 2277 xpt_freeze_devq(ccb->ccb_h.path, 1); 2278 xpt_done(ccb); 2279 goto done; 2280 } 2281 /* 2282 * Return fake inquiry data for 2283 * broken devices 2284 */ 2285 if (sc->sc_quirks & NO_INQUIRY) { 2286 memcpy(ccb->csio.data_ptr, &fake_inq_data, 2287 sizeof(fake_inq_data)); 2288 ccb->csio.scsi_status = SCSI_STATUS_OK; 2289 ccb->ccb_h.status = CAM_REQ_CMP; 2290 xpt_done(ccb); 2291 goto done; 2292 } 2293 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2294 ccb->csio.dxfer_len = SHORT_INQUIRY_LENGTH; 2295 } 2296 } else if (sc->sc_transfer.cmd_data[0] == PREVENT_ALLOW) { 2297 if (sc->sc_quirks & NO_PREVENT_ALLOW) { 2298 ccb->csio.scsi_status = SCSI_STATUS_OK; 2299 ccb->ccb_h.status = CAM_REQ_CMP; 2300 xpt_done(ccb); 2301 goto done; 2302 } 2303 } else if (sc->sc_transfer.cmd_data[0] == SYNCHRONIZE_CACHE) { 2304 if (sc->sc_quirks & NO_SYNCHRONIZE_CACHE) { 2305 ccb->csio.scsi_status = SCSI_STATUS_OK; 2306 ccb->ccb_h.status = CAM_REQ_CMP; 2307 xpt_done(ccb); 2308 goto done; 2309 } 2310 } else if (sc->sc_transfer.cmd_data[0] == START_STOP_UNIT) { 2311 if (sc->sc_quirks & NO_START_STOP) { 2312 ccb->csio.scsi_status = SCSI_STATUS_OK; 2313 ccb->ccb_h.status = CAM_REQ_CMP; 2314 xpt_done(ccb); 2315 goto done; 2316 } 2317 } 2318 umass_command_start(sc, dir, ccb->csio.data_ptr, 2319 ccb->csio.dxfer_len, 2320 ccb->ccb_h.timeout, 2321 &umass_cam_cb, ccb); 2322 } 2323 break; 2324 } 2325 case XPT_PATH_INQ: 2326 { 2327 struct ccb_pathinq *cpi = &ccb->cpi; 2328 2329 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_PATH_INQ:.\n", 2330 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2331 (uintmax_t)ccb->ccb_h.target_lun); 2332 2333 /* host specific information */ 2334 cpi->version_num = 1; 2335 cpi->hba_inquiry = 0; 2336 cpi->target_sprt = 0; 2337 cpi->hba_misc = PIM_NO_6_BYTE; 2338 cpi->hba_eng_cnt = 0; 2339 cpi->max_target = UMASS_SCSIID_MAX; /* one target */ 2340 cpi->initiator_id = UMASS_SCSIID_HOST; 2341 strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); 2342 strlcpy(cpi->hba_vid, "USB SCSI", HBA_IDLEN); 2343 strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); 2344 cpi->unit_number = cam_sim_unit(sim); 2345 cpi->bus_id = sc->sc_unit; 2346 cpi->protocol = PROTO_SCSI; 2347 cpi->protocol_version = SCSI_REV_2; 2348 cpi->transport = XPORT_USB; 2349 cpi->transport_version = 0; 2350 2351 if (sc == NULL) { 2352 cpi->base_transfer_speed = 0; 2353 cpi->max_lun = 0; 2354 } else { 2355 if (sc->sc_quirks & FLOPPY_SPEED) { 2356 cpi->base_transfer_speed = 2357 UMASS_FLOPPY_TRANSFER_SPEED; 2358 } else { 2359 switch (usbd_get_speed(sc->sc_udev)) { 2360 case USB_SPEED_SUPER: 2361 cpi->base_transfer_speed = 2362 UMASS_SUPER_TRANSFER_SPEED; 2363 cpi->maxio = maxphys; 2364 break; 2365 case USB_SPEED_HIGH: 2366 cpi->base_transfer_speed = 2367 UMASS_HIGH_TRANSFER_SPEED; 2368 break; 2369 default: 2370 cpi->base_transfer_speed = 2371 UMASS_FULL_TRANSFER_SPEED; 2372 break; 2373 } 2374 } 2375 cpi->max_lun = sc->sc_maxlun; 2376 } 2377 2378 cpi->ccb_h.status = CAM_REQ_CMP; 2379 xpt_done(ccb); 2380 break; 2381 } 2382 case XPT_RESET_DEV: 2383 { 2384 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_RESET_DEV:.\n", 2385 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2386 (uintmax_t)ccb->ccb_h.target_lun); 2387 2388 umass_reset(sc); 2389 2390 ccb->ccb_h.status = CAM_REQ_CMP; 2391 xpt_done(ccb); 2392 break; 2393 } 2394 case XPT_GET_TRAN_SETTINGS: 2395 { 2396 struct ccb_trans_settings *cts = &ccb->cts; 2397 2398 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_GET_TRAN_SETTINGS:.\n", 2399 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2400 (uintmax_t)ccb->ccb_h.target_lun); 2401 2402 cts->protocol = PROTO_SCSI; 2403 cts->protocol_version = SCSI_REV_2; 2404 cts->transport = XPORT_USB; 2405 cts->transport_version = 0; 2406 cts->xport_specific.valid = 0; 2407 2408 ccb->ccb_h.status = CAM_REQ_CMP; 2409 xpt_done(ccb); 2410 break; 2411 } 2412 case XPT_SET_TRAN_SETTINGS: 2413 { 2414 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_SET_TRAN_SETTINGS:.\n", 2415 cam_sim_path(sc->sc_sim), ccb->ccb_h.target_id, 2416 (uintmax_t)ccb->ccb_h.target_lun); 2417 2418 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2419 xpt_done(ccb); 2420 break; 2421 } 2422 case XPT_CALC_GEOMETRY: 2423 { 2424 cam_calc_geometry(&ccb->ccg, /* extended */ 1); 2425 xpt_done(ccb); 2426 break; 2427 } 2428 case XPT_NOOP: 2429 { 2430 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:XPT_NOOP:.\n", 2431 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2432 (uintmax_t)ccb->ccb_h.target_lun); 2433 2434 ccb->ccb_h.status = CAM_REQ_CMP; 2435 xpt_done(ccb); 2436 break; 2437 } 2438 default: 2439 DPRINTF(sc, UDMASS_SCSI, "%d:%d:%jx:func_code 0x%04x: " 2440 "Not implemented\n", 2441 sc ? cam_sim_path(sc->sc_sim) : -1, ccb->ccb_h.target_id, 2442 (uintmax_t)ccb->ccb_h.target_lun, ccb->ccb_h.func_code); 2443 2444 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 2445 xpt_done(ccb); 2446 break; 2447 } 2448 2449 done: 2450 return; 2451 } 2452 2453 static void 2454 umass_cam_poll(struct cam_sim *sim) 2455 { 2456 struct umass_softc *sc = cam_sim_softc(sim); 2457 2458 if (sc == NULL) 2459 return; 2460 2461 DPRINTF(sc, UDMASS_SCSI, "CAM poll\n"); 2462 2463 usbd_transfer_poll(sc->sc_xfer, UMASS_T_MAX); 2464 } 2465 2466 /* umass_cam_cb 2467 * finalise a completed CAM command 2468 */ 2469 2470 static void 2471 umass_cam_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2472 uint8_t status) 2473 { 2474 ccb->csio.resid = residue; 2475 2476 switch (status) { 2477 case STATUS_CMD_OK: 2478 ccb->ccb_h.status = CAM_REQ_CMP; 2479 if ((sc->sc_quirks & READ_CAPACITY_OFFBY1) && 2480 (ccb->ccb_h.func_code == XPT_SCSI_IO) && 2481 (ccb->csio.cdb_io.cdb_bytes[0] == READ_CAPACITY)) { 2482 struct scsi_read_capacity_data *rcap; 2483 uint32_t maxsector; 2484 2485 rcap = (void *)(ccb->csio.data_ptr); 2486 maxsector = scsi_4btoul(rcap->addr) - 1; 2487 scsi_ulto4b(maxsector, rcap->addr); 2488 } 2489 /* 2490 * We have to add SVPD_UNIT_SERIAL_NUMBER to the list 2491 * of pages supported by the device - otherwise, CAM 2492 * will never ask us for the serial number if the 2493 * device cannot handle that by itself. 2494 */ 2495 if (ccb->ccb_h.func_code == XPT_SCSI_IO && 2496 sc->sc_transfer.cmd_data[0] == INQUIRY && 2497 (sc->sc_transfer.cmd_data[1] & SI_EVPD) && 2498 sc->sc_transfer.cmd_data[2] == SVPD_SUPPORTED_PAGE_LIST && 2499 (usb_get_serial(sc->sc_udev)[0] != '\0')) { 2500 struct ccb_scsiio *csio; 2501 struct scsi_vpd_supported_page_list *page_list; 2502 2503 csio = &ccb->csio; 2504 page_list = (struct scsi_vpd_supported_page_list *)csio->data_ptr; 2505 if (page_list->length + 1 < SVPD_SUPPORTED_PAGES_SIZE) { 2506 page_list->list[page_list->length] = SVPD_UNIT_SERIAL_NUMBER; 2507 page_list->length++; 2508 } 2509 } 2510 xpt_done(ccb); 2511 break; 2512 2513 case STATUS_CMD_UNKNOWN: 2514 case STATUS_CMD_FAILED: 2515 2516 /* fetch sense data */ 2517 2518 /* the rest of the command was filled in at attach */ 2519 sc->cam_scsi_sense.length = ccb->csio.sense_len; 2520 2521 DPRINTF(sc, UDMASS_SCSI, "Fetching %d bytes of " 2522 "sense data\n", ccb->csio.sense_len); 2523 2524 if (umass_std_transform(sc, ccb, &sc->cam_scsi_sense.opcode, 2525 sizeof(sc->cam_scsi_sense))) { 2526 umass_command_start(sc, DIR_IN, &ccb->csio.sense_data.error_code, 2527 ccb->csio.sense_len, ccb->ccb_h.timeout, 2528 &umass_cam_sense_cb, ccb); 2529 } 2530 break; 2531 2532 default: 2533 /* 2534 * The wire protocol failed and will hopefully have 2535 * recovered. We return an error to CAM and let CAM 2536 * retry the command if necessary. 2537 */ 2538 xpt_freeze_devq(ccb->ccb_h.path, 1); 2539 ccb->ccb_h.status = CAM_REQ_CMP_ERR | CAM_DEV_QFRZN; 2540 xpt_done(ccb); 2541 break; 2542 } 2543 } 2544 2545 /* 2546 * Finalise a completed autosense operation 2547 */ 2548 static void 2549 umass_cam_sense_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2550 uint8_t status) 2551 { 2552 uint8_t *cmd; 2553 2554 switch (status) { 2555 case STATUS_CMD_OK: 2556 case STATUS_CMD_UNKNOWN: 2557 case STATUS_CMD_FAILED: { 2558 int key, sense_len; 2559 2560 ccb->csio.sense_resid = residue; 2561 sense_len = ccb->csio.sense_len - ccb->csio.sense_resid; 2562 key = scsi_get_sense_key(&ccb->csio.sense_data, sense_len, 2563 /*show_errors*/ 1); 2564 2565 if (ccb->csio.ccb_h.flags & CAM_CDB_POINTER) { 2566 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_ptr); 2567 } else { 2568 cmd = (uint8_t *)(ccb->csio.cdb_io.cdb_bytes); 2569 } 2570 2571 /* 2572 * Getting sense data always succeeds (apart from wire 2573 * failures): 2574 */ 2575 if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2576 (cmd[0] == INQUIRY) && 2577 (key == SSD_KEY_UNIT_ATTENTION)) { 2578 /* 2579 * Ignore unit attention errors in the case where 2580 * the Unit Attention state is not cleared on 2581 * REQUEST SENSE. They will appear again at the next 2582 * command. 2583 */ 2584 ccb->ccb_h.status = CAM_REQ_CMP; 2585 } else if (key == SSD_KEY_NO_SENSE) { 2586 /* 2587 * No problem after all (in the case of CBI without 2588 * CCI) 2589 */ 2590 ccb->ccb_h.status = CAM_REQ_CMP; 2591 } else if ((sc->sc_quirks & RS_NO_CLEAR_UA) && 2592 (cmd[0] == READ_CAPACITY) && 2593 (key == SSD_KEY_UNIT_ATTENTION)) { 2594 /* 2595 * Some devices do not clear the unit attention error 2596 * on request sense. We insert a test unit ready 2597 * command to make sure we clear the unit attention 2598 * condition, then allow the retry to proceed as 2599 * usual. 2600 */ 2601 2602 xpt_freeze_devq(ccb->ccb_h.path, 1); 2603 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2604 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2605 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2606 2607 #if 0 2608 DELAY(300000); 2609 #endif 2610 DPRINTF(sc, UDMASS_SCSI, "Doing a sneaky" 2611 "TEST_UNIT_READY\n"); 2612 2613 /* the rest of the command was filled in at attach */ 2614 2615 if ((sc->sc_transform)(sc, 2616 &sc->cam_scsi_test_unit_ready.opcode, 2617 sizeof(sc->cam_scsi_test_unit_ready)) == 1) { 2618 umass_command_start(sc, DIR_NONE, NULL, 0, 2619 ccb->ccb_h.timeout, 2620 &umass_cam_quirk_cb, ccb); 2621 break; 2622 } 2623 } else { 2624 xpt_freeze_devq(ccb->ccb_h.path, 1); 2625 if (key >= 0) { 2626 ccb->ccb_h.status = CAM_SCSI_STATUS_ERROR 2627 | CAM_AUTOSNS_VALID | CAM_DEV_QFRZN; 2628 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 2629 } else 2630 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL 2631 | CAM_DEV_QFRZN; 2632 } 2633 xpt_done(ccb); 2634 break; 2635 } 2636 default: 2637 DPRINTF(sc, UDMASS_SCSI, "Autosense failed, " 2638 "status %d\n", status); 2639 xpt_freeze_devq(ccb->ccb_h.path, 1); 2640 ccb->ccb_h.status = CAM_AUTOSENSE_FAIL | CAM_DEV_QFRZN; 2641 xpt_done(ccb); 2642 } 2643 } 2644 2645 /* 2646 * This completion code just handles the fact that we sent a test-unit-ready 2647 * after having previously failed a READ CAPACITY with CHECK_COND. The CCB 2648 * status for CAM is already set earlier. 2649 */ 2650 static void 2651 umass_cam_quirk_cb(struct umass_softc *sc, union ccb *ccb, uint32_t residue, 2652 uint8_t status) 2653 { 2654 DPRINTF(sc, UDMASS_SCSI, "Test unit ready " 2655 "returned status %d\n", status); 2656 2657 xpt_done(ccb); 2658 } 2659 2660 /* 2661 * SCSI specific functions 2662 */ 2663 2664 static uint8_t 2665 umass_scsi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2666 uint8_t cmd_len) 2667 { 2668 if ((cmd_len == 0) || 2669 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2670 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2671 "length: %d bytes\n", cmd_len); 2672 return (0); /* failure */ 2673 } 2674 sc->sc_transfer.cmd_len = cmd_len; 2675 2676 switch (cmd_ptr[0]) { 2677 case TEST_UNIT_READY: 2678 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2679 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2680 "to START_UNIT\n"); 2681 memset(sc->sc_transfer.cmd_data, 0, cmd_len); 2682 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2683 sc->sc_transfer.cmd_data[4] = SSS_START; 2684 return (1); 2685 } 2686 break; 2687 2688 case INQUIRY: 2689 /* 2690 * some drives wedge when asked for full inquiry 2691 * information. 2692 */ 2693 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2694 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2695 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2696 return (1); 2697 } 2698 break; 2699 } 2700 2701 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2702 return (1); 2703 } 2704 2705 static uint8_t 2706 umass_rbc_transform(struct umass_softc *sc, uint8_t *cmd_ptr, uint8_t cmd_len) 2707 { 2708 if ((cmd_len == 0) || 2709 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2710 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2711 "length: %d bytes\n", cmd_len); 2712 return (0); /* failure */ 2713 } 2714 switch (cmd_ptr[0]) { 2715 /* these commands are defined in RBC: */ 2716 case READ_10: 2717 case READ_CAPACITY: 2718 case START_STOP_UNIT: 2719 case SYNCHRONIZE_CACHE: 2720 case WRITE_10: 2721 case VERIFY_10: 2722 case INQUIRY: 2723 case MODE_SELECT_10: 2724 case MODE_SENSE_10: 2725 case TEST_UNIT_READY: 2726 case WRITE_BUFFER: 2727 /* 2728 * The following commands are not listed in my copy of the 2729 * RBC specs. CAM however seems to want those, and at least 2730 * the Sony DSC device appears to support those as well 2731 */ 2732 case REQUEST_SENSE: 2733 case PREVENT_ALLOW: 2734 2735 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2736 2737 if ((sc->sc_quirks & RBC_PAD_TO_12) && (cmd_len < 12)) { 2738 memset(sc->sc_transfer.cmd_data + cmd_len, 2739 0, 12 - cmd_len); 2740 cmd_len = 12; 2741 } 2742 sc->sc_transfer.cmd_len = cmd_len; 2743 return (1); /* success */ 2744 2745 /* All other commands are not legal in RBC */ 2746 default: 2747 DPRINTF(sc, UDMASS_SCSI, "Unsupported RBC " 2748 "command 0x%02x\n", cmd_ptr[0]); 2749 return (0); /* failure */ 2750 } 2751 } 2752 2753 static uint8_t 2754 umass_ufi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2755 uint8_t cmd_len) 2756 { 2757 if ((cmd_len == 0) || 2758 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2759 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2760 "length: %d bytes\n", cmd_len); 2761 return (0); /* failure */ 2762 } 2763 /* An UFI command is always 12 bytes in length */ 2764 sc->sc_transfer.cmd_len = UFI_COMMAND_LENGTH; 2765 2766 /* Zero the command data */ 2767 memset(sc->sc_transfer.cmd_data, 0, UFI_COMMAND_LENGTH); 2768 2769 switch (cmd_ptr[0]) { 2770 /* 2771 * Commands of which the format has been verified. They 2772 * should work. Copy the command into the (zeroed out) 2773 * destination buffer. 2774 */ 2775 case TEST_UNIT_READY: 2776 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2777 /* 2778 * Some devices do not support this command. Start 2779 * Stop Unit should give the same results 2780 */ 2781 DPRINTF(sc, UDMASS_UFI, "Converted TEST_UNIT_READY " 2782 "to START_UNIT\n"); 2783 2784 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2785 sc->sc_transfer.cmd_data[4] = SSS_START; 2786 return (1); 2787 } 2788 break; 2789 2790 case REZERO_UNIT: 2791 case REQUEST_SENSE: 2792 case FORMAT_UNIT: 2793 case INQUIRY: 2794 case START_STOP_UNIT: 2795 case SEND_DIAGNOSTIC: 2796 case PREVENT_ALLOW: 2797 case READ_CAPACITY: 2798 case READ_10: 2799 case WRITE_10: 2800 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2801 case WRITE_AND_VERIFY: 2802 case VERIFY: 2803 case MODE_SELECT_10: 2804 case MODE_SENSE_10: 2805 case READ_12: 2806 case WRITE_12: 2807 case READ_FORMAT_CAPACITIES: 2808 break; 2809 2810 /* 2811 * SYNCHRONIZE_CACHE isn't supported by UFI, nor should it be 2812 * required for UFI devices, so it is appropriate to fake 2813 * success. 2814 */ 2815 case SYNCHRONIZE_CACHE: 2816 return (2); 2817 2818 default: 2819 DPRINTF(sc, UDMASS_SCSI, "Unsupported UFI " 2820 "command 0x%02x\n", cmd_ptr[0]); 2821 return (0); /* failure */ 2822 } 2823 2824 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2825 return (1); /* success */ 2826 } 2827 2828 /* 2829 * 8070i (ATAPI) specific functions 2830 */ 2831 static uint8_t 2832 umass_atapi_transform(struct umass_softc *sc, uint8_t *cmd_ptr, 2833 uint8_t cmd_len) 2834 { 2835 if ((cmd_len == 0) || 2836 (cmd_len > sizeof(sc->sc_transfer.cmd_data))) { 2837 DPRINTF(sc, UDMASS_SCSI, "Invalid command " 2838 "length: %d bytes\n", cmd_len); 2839 return (0); /* failure */ 2840 } 2841 /* An ATAPI command is always 12 bytes in length. */ 2842 sc->sc_transfer.cmd_len = ATAPI_COMMAND_LENGTH; 2843 2844 /* Zero the command data */ 2845 memset(sc->sc_transfer.cmd_data, 0, ATAPI_COMMAND_LENGTH); 2846 2847 switch (cmd_ptr[0]) { 2848 /* 2849 * Commands of which the format has been verified. They 2850 * should work. Copy the command into the destination 2851 * buffer. 2852 */ 2853 case INQUIRY: 2854 /* 2855 * some drives wedge when asked for full inquiry 2856 * information. 2857 */ 2858 if (sc->sc_quirks & FORCE_SHORT_INQUIRY) { 2859 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2860 2861 sc->sc_transfer.cmd_data[4] = SHORT_INQUIRY_LENGTH; 2862 return (1); 2863 } 2864 break; 2865 2866 case TEST_UNIT_READY: 2867 if (sc->sc_quirks & NO_TEST_UNIT_READY) { 2868 DPRINTF(sc, UDMASS_SCSI, "Converted TEST_UNIT_READY " 2869 "to START_UNIT\n"); 2870 sc->sc_transfer.cmd_data[0] = START_STOP_UNIT; 2871 sc->sc_transfer.cmd_data[4] = SSS_START; 2872 return (1); 2873 } 2874 break; 2875 2876 case REZERO_UNIT: 2877 case REQUEST_SENSE: 2878 case START_STOP_UNIT: 2879 case SEND_DIAGNOSTIC: 2880 case PREVENT_ALLOW: 2881 case READ_CAPACITY: 2882 case READ_10: 2883 case WRITE_10: 2884 case POSITION_TO_ELEMENT: /* SEEK_10 */ 2885 case SYNCHRONIZE_CACHE: 2886 case MODE_SELECT_10: 2887 case MODE_SENSE_10: 2888 case READ_BUFFER: 2889 case 0x42: /* READ_SUBCHANNEL */ 2890 case 0x43: /* READ_TOC */ 2891 case 0x44: /* READ_HEADER */ 2892 case 0x47: /* PLAY_MSF (Play Minute/Second/Frame) */ 2893 case 0x48: /* PLAY_TRACK */ 2894 case 0x49: /* PLAY_TRACK_REL */ 2895 case 0x4b: /* PAUSE */ 2896 case 0x51: /* READ_DISK_INFO */ 2897 case 0x52: /* READ_TRACK_INFO */ 2898 case 0x54: /* SEND_OPC */ 2899 case 0x59: /* READ_MASTER_CUE */ 2900 case 0x5b: /* CLOSE_TR_SESSION */ 2901 case 0x5c: /* READ_BUFFER_CAP */ 2902 case 0x5d: /* SEND_CUE_SHEET */ 2903 case 0xa1: /* BLANK */ 2904 case 0xa5: /* PLAY_12 */ 2905 case 0xa6: /* EXCHANGE_MEDIUM */ 2906 case 0xad: /* READ_DVD_STRUCTURE */ 2907 case 0xbb: /* SET_CD_SPEED */ 2908 case 0xe5: /* READ_TRACK_INFO_PHILIPS */ 2909 break; 2910 2911 case READ_12: 2912 case WRITE_12: 2913 default: 2914 DPRINTF(sc, UDMASS_SCSI, "Unsupported ATAPI " 2915 "command 0x%02x - trying anyway\n", 2916 cmd_ptr[0]); 2917 break; 2918 } 2919 2920 memcpy(sc->sc_transfer.cmd_data, cmd_ptr, cmd_len); 2921 return (1); /* success */ 2922 } 2923 2924 static uint8_t 2925 umass_no_transform(struct umass_softc *sc, uint8_t *cmd, 2926 uint8_t cmdlen) 2927 { 2928 return (0); /* failure */ 2929 } 2930 2931 static uint8_t 2932 umass_std_transform(struct umass_softc *sc, union ccb *ccb, 2933 uint8_t *cmd, uint8_t cmdlen) 2934 { 2935 uint8_t retval; 2936 2937 retval = (sc->sc_transform) (sc, cmd, cmdlen); 2938 2939 if (retval == 2) { 2940 ccb->ccb_h.status = CAM_REQ_CMP; 2941 xpt_done(ccb); 2942 return (0); 2943 } else if (retval == 0) { 2944 xpt_freeze_devq(ccb->ccb_h.path, 1); 2945 ccb->ccb_h.status = CAM_REQ_INVALID | CAM_DEV_QFRZN; 2946 xpt_done(ccb); 2947 return (0); 2948 } 2949 /* Command should be executed */ 2950 return (1); 2951 } 2952 2953 #ifdef USB_DEBUG 2954 static void 2955 umass_bbb_dump_cbw(struct umass_softc *sc, umass_bbb_cbw_t *cbw) 2956 { 2957 uint8_t *c = cbw->CBWCDB; 2958 2959 uint32_t dlen = UGETDW(cbw->dCBWDataTransferLength); 2960 uint32_t tag = UGETDW(cbw->dCBWTag); 2961 2962 uint8_t clen = cbw->bCDBLength; 2963 uint8_t flags = cbw->bCBWFlags; 2964 uint8_t lun = cbw->bCBWLUN; 2965 2966 DPRINTF(sc, UDMASS_BBB, "CBW %d: cmd = %db " 2967 "(0x%02x%02x%02x%02x%02x%02x%s), " 2968 "data = %db, lun = %d, dir = %s\n", 2969 tag, clen, 2970 c[0], c[1], c[2], c[3], c[4], c[5], (clen > 6 ? "..." : ""), 2971 dlen, lun, (flags == CBWFLAGS_IN ? "in" : 2972 (flags == CBWFLAGS_OUT ? "out" : "<invalid>"))); 2973 } 2974 2975 static void 2976 umass_bbb_dump_csw(struct umass_softc *sc, umass_bbb_csw_t *csw) 2977 { 2978 uint32_t sig = UGETDW(csw->dCSWSignature); 2979 uint32_t tag = UGETDW(csw->dCSWTag); 2980 uint32_t res = UGETDW(csw->dCSWDataResidue); 2981 uint8_t status = csw->bCSWStatus; 2982 2983 DPRINTF(sc, UDMASS_BBB, "CSW %d: sig = 0x%08x (%s), tag = 0x%08x, " 2984 "res = %d, status = 0x%02x (%s)\n", 2985 tag, sig, (sig == CSWSIGNATURE ? "valid" : "invalid"), 2986 tag, res, 2987 status, (status == CSWSTATUS_GOOD ? "good" : 2988 (status == CSWSTATUS_FAILED ? "failed" : 2989 (status == CSWSTATUS_PHASE ? "phase" : "<invalid>")))); 2990 } 2991 2992 static void 2993 umass_cbi_dump_cmd(struct umass_softc *sc, void *cmd, uint8_t cmdlen) 2994 { 2995 uint8_t *c = cmd; 2996 uint8_t dir = sc->sc_transfer.dir; 2997 2998 DPRINTF(sc, UDMASS_BBB, "cmd = %db " 2999 "(0x%02x%02x%02x%02x%02x%02x%s), " 3000 "data = %db, dir = %s\n", 3001 cmdlen, 3002 c[0], c[1], c[2], c[3], c[4], c[5], (cmdlen > 6 ? "..." : ""), 3003 sc->sc_transfer.data_len, 3004 (dir == DIR_IN ? "in" : 3005 (dir == DIR_OUT ? "out" : 3006 (dir == DIR_NONE ? "no data phase" : "<invalid>")))); 3007 } 3008 3009 static void 3010 umass_dump_buffer(struct umass_softc *sc, uint8_t *buffer, uint32_t buflen, 3011 uint32_t printlen) 3012 { 3013 uint32_t i, j; 3014 char s1[40]; 3015 char s2[40]; 3016 char s3[5]; 3017 3018 s1[0] = '\0'; 3019 s3[0] = '\0'; 3020 3021 sprintf(s2, " buffer=%p, buflen=%d", buffer, buflen); 3022 for (i = 0; (i < buflen) && (i < printlen); i++) { 3023 j = i % 16; 3024 if (j == 0 && i != 0) { 3025 DPRINTF(sc, UDMASS_GEN, "0x %s%s\n", 3026 s1, s2); 3027 s2[0] = '\0'; 3028 } 3029 sprintf(&s1[j * 2], "%02x", buffer[i] & 0xff); 3030 } 3031 if (buflen > printlen) 3032 sprintf(s3, " ..."); 3033 DPRINTF(sc, UDMASS_GEN, "0x %s%s%s\n", 3034 s1, s2, s3); 3035 } 3036 3037 #endif 3038