1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */ 2 /* $FreeBSD$ */ 3 4 /*- 5 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-2-Clause-NetBSD 6 * 7 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 /*- 33 * Copyright (c) 1999 The NetBSD Foundation, Inc. 34 * All rights reserved. 35 * 36 * This code is derived from software contributed to The NetBSD Foundation 37 * by Lennart Augustsson (lennart@augustsson.net) at 38 * Carlstedt Research & Technology. 39 * 40 * Redistribution and use in source and binary forms, with or without 41 * modification, are permitted provided that the following conditions 42 * are met: 43 * 1. Redistributions of source code must retain the above copyright 44 * notice, this list of conditions and the following disclaimer. 45 * 2. Redistributions in binary form must reproduce the above copyright 46 * notice, this list of conditions and the following disclaimer in the 47 * documentation and/or other materials provided with the distribution. 48 * 49 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 50 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 51 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 52 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 53 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 54 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 55 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 56 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 57 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 58 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 59 * POSSIBILITY OF SUCH DAMAGE. 60 */ 61 62 #ifndef _USB_SERIAL_H_ 63 #define _USB_SERIAL_H_ 64 65 #include <sys/tty.h> 66 #include <sys/serial.h> 67 #include <sys/fcntl.h> 68 #include <sys/sysctl.h> 69 #include <sys/timepps.h> 70 71 /* Module interface related macros */ 72 #define UCOM_MODVER 1 73 74 #define UCOM_MINVER 1 75 #define UCOM_PREFVER UCOM_MODVER 76 #define UCOM_MAXVER 1 77 #define UCOM_JITTERBUF_SIZE 128 /* bytes */ 78 79 struct usb_device; 80 struct ucom_softc; 81 struct usb_device_request; 82 struct thread; 83 84 /* 85 * NOTE: There is no guarantee that "ucom_cfg_close()" will 86 * be called after "ucom_cfg_open()" if the device is detached 87 * while it is open! 88 */ 89 struct ucom_callback { 90 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr); 91 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t); 92 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t); 93 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t); 94 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t); 95 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *); 96 void (*ucom_cfg_open) (struct ucom_softc *); 97 void (*ucom_cfg_close) (struct ucom_softc *); 98 int (*ucom_pre_open) (struct ucom_softc *); 99 int (*ucom_pre_param) (struct ucom_softc *, struct termios *); 100 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *); 101 void (*ucom_start_read) (struct ucom_softc *); 102 void (*ucom_stop_read) (struct ucom_softc *); 103 void (*ucom_start_write) (struct ucom_softc *); 104 void (*ucom_stop_write) (struct ucom_softc *); 105 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit); 106 void (*ucom_poll) (struct ucom_softc *); 107 void (*ucom_free) (struct ucom_softc *); 108 }; 109 110 /* Line status register */ 111 #define ULSR_RCV_FIFO 0x80 112 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */ 113 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */ 114 #define ULSR_BI 0x10 /* Break detected */ 115 #define ULSR_FE 0x08 /* Framing error: bad stop bit */ 116 #define ULSR_PE 0x04 /* Parity error */ 117 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */ 118 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */ 119 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */ 120 121 struct ucom_cfg_task { 122 struct usb_proc_msg hdr; 123 struct ucom_softc *sc; 124 }; 125 126 struct ucom_param_task { 127 struct usb_proc_msg hdr; 128 struct ucom_softc *sc; 129 struct termios termios_copy; 130 }; 131 132 struct ucom_super_softc { 133 struct usb_process sc_tq; 134 int sc_unit; 135 int sc_subunits; 136 int sc_refs; 137 int sc_flag; /* see UCOM_FLAG_XXX */ 138 struct sysctl_oid *sc_sysctl_ttyname; 139 struct sysctl_oid *sc_sysctl_ttyports; 140 char sc_ttyname[16]; 141 }; 142 143 struct ucom_softc { 144 /* 145 * NOTE: To avoid losing level change information we use two 146 * tasks instead of one for all commands. 147 * 148 * Level changes are transitions like: 149 * 150 * ON->OFF 151 * OFF->ON 152 * OPEN->CLOSE 153 * CLOSE->OPEN 154 */ 155 struct ucom_cfg_task sc_start_task[2]; 156 struct ucom_cfg_task sc_open_task[2]; 157 struct ucom_cfg_task sc_close_task[2]; 158 struct ucom_cfg_task sc_line_state_task[2]; 159 struct ucom_cfg_task sc_status_task[2]; 160 struct ucom_param_task sc_param_task[2]; 161 /* pulse capturing support, PPS */ 162 struct pps_state sc_pps; 163 /* Used to set "UCOM_FLAG_GP_DATA" flag: */ 164 struct usb_proc_msg *sc_last_start_xfer; 165 const struct ucom_callback *sc_callback; 166 struct ucom_super_softc *sc_super; 167 struct tty *sc_tty; 168 struct mtx *sc_mtx; 169 void *sc_parent; 170 int sc_subunit; 171 uint16_t sc_jitterbuf_in; 172 uint16_t sc_jitterbuf_out; 173 uint16_t sc_portno; 174 uint16_t sc_flag; 175 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */ 176 #define UCOM_FLAG_GONE 0x02 /* the device is gone */ 177 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */ 178 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */ 179 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */ 180 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */ 181 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */ 182 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */ 183 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */ 184 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */ 185 #define UCOM_FLAG_LSRTXIDLE 0x0800 /* set if sc_lsr bits ULSR_TSRE+TXRDY work */ 186 uint8_t sc_lsr; 187 uint8_t sc_msr; 188 uint8_t sc_mcr; 189 /* programmed line state bits */ 190 uint8_t sc_pls_set; /* set bits */ 191 uint8_t sc_pls_clr; /* cleared bits */ 192 uint8_t sc_pls_curr; /* last state */ 193 #define UCOM_LS_DTR 0x01 194 #define UCOM_LS_RTS 0x02 195 #define UCOM_LS_BREAK 0x04 196 #define UCOM_LS_RING 0x08 197 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE]; 198 }; 199 200 #define UCOM_MTX_ASSERT(sc, what) USB_MTX_ASSERT((sc)->sc_mtx, what) 201 #define UCOM_MTX_LOCK(sc) USB_MTX_LOCK((sc)->sc_mtx) 202 #define UCOM_MTX_UNLOCK(sc) USB_MTX_UNLOCK((sc)->sc_mtx) 203 #define UCOM_UNLOAD_DRAIN(x) \ 204 SYSUNINIT(var, SI_SUB_KLD - 2, SI_ORDER_ANY, ucom_drain_all, 0) 205 206 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \ 207 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo) 208 209 int ucom_attach(struct ucom_super_softc *, 210 struct ucom_softc *, int, void *, 211 const struct ucom_callback *callback, struct mtx *); 212 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *); 213 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t); 214 void ucom_status_change(struct ucom_softc *); 215 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *, 216 uint32_t, uint32_t, uint32_t *); 217 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *, 218 uint32_t, uint32_t); 219 uint8_t ucom_cfg_is_gone(struct ucom_softc *); 220 void ucom_drain(struct ucom_super_softc *); 221 void ucom_drain_all(void *); 222 void ucom_ref(struct ucom_super_softc *); 223 int ucom_unref(struct ucom_super_softc *); 224 225 static inline void 226 ucom_use_lsr_txbits(struct ucom_softc *sc) 227 { 228 229 sc->sc_flag |= UCOM_FLAG_LSRTXIDLE; 230 } 231 232 #endif /* _USB_SERIAL_H_ */ 233