1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */ 2 3 /*- 4 * SPDX-License-Identifier: BSD-2-Clause 5 * 6 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 28 * SUCH DAMAGE. 29 */ 30 31 /*- 32 * Copyright (c) 1999 The NetBSD Foundation, Inc. 33 * All rights reserved. 34 * 35 * This code is derived from software contributed to The NetBSD Foundation 36 * by Lennart Augustsson (lennart@augustsson.net) at 37 * Carlstedt Research & Technology. 38 * 39 * Redistribution and use in source and binary forms, with or without 40 * modification, are permitted provided that the following conditions 41 * are met: 42 * 1. Redistributions of source code must retain the above copyright 43 * notice, this list of conditions and the following disclaimer. 44 * 2. Redistributions in binary form must reproduce the above copyright 45 * notice, this list of conditions and the following disclaimer in the 46 * documentation and/or other materials provided with the distribution. 47 * 48 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 49 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 50 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 51 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 52 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 53 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 54 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 55 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 56 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 57 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 58 * POSSIBILITY OF SUCH DAMAGE. 59 */ 60 61 #ifndef _USB_SERIAL_H_ 62 #define _USB_SERIAL_H_ 63 64 #include <sys/tty.h> 65 #include <sys/serial.h> 66 #include <sys/fcntl.h> 67 #include <sys/sysctl.h> 68 #include <sys/timepps.h> 69 70 /* Module interface related macros */ 71 #define UCOM_MODVER 1 72 73 #define UCOM_MINVER 1 74 #define UCOM_PREFVER UCOM_MODVER 75 #define UCOM_MAXVER 1 76 #define UCOM_JITTERBUF_SIZE 128 /* bytes */ 77 78 struct usb_device; 79 struct ucom_softc; 80 struct usb_device_request; 81 struct thread; 82 83 /* 84 * NOTE: There is no guarantee that "ucom_cfg_close()" will 85 * be called after "ucom_cfg_open()" if the device is detached 86 * while it is open! 87 */ 88 struct ucom_callback { 89 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr); 90 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t); 91 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t); 92 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t); 93 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t); 94 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *); 95 void (*ucom_cfg_open) (struct ucom_softc *); 96 void (*ucom_cfg_close) (struct ucom_softc *); 97 int (*ucom_pre_open) (struct ucom_softc *); 98 int (*ucom_pre_param) (struct ucom_softc *, struct termios *); 99 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *); 100 void (*ucom_start_read) (struct ucom_softc *); 101 void (*ucom_stop_read) (struct ucom_softc *); 102 void (*ucom_start_write) (struct ucom_softc *); 103 void (*ucom_stop_write) (struct ucom_softc *); 104 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit); 105 void (*ucom_poll) (struct ucom_softc *); 106 void (*ucom_free) (struct ucom_softc *); 107 }; 108 109 /* Line status register */ 110 #define ULSR_RCV_FIFO 0x80 111 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */ 112 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */ 113 #define ULSR_BI 0x10 /* Break detected */ 114 #define ULSR_FE 0x08 /* Framing error: bad stop bit */ 115 #define ULSR_PE 0x04 /* Parity error */ 116 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */ 117 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */ 118 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */ 119 120 struct ucom_cfg_task { 121 struct usb_proc_msg hdr; 122 struct ucom_softc *sc; 123 }; 124 125 struct ucom_param_task { 126 struct usb_proc_msg hdr; 127 struct ucom_softc *sc; 128 struct termios termios_copy; 129 }; 130 131 struct ucom_super_softc { 132 struct usb_process sc_tq; 133 int sc_unit; 134 int sc_subunits; 135 int sc_refs; 136 int sc_flag; /* see UCOM_FLAG_XXX */ 137 struct sysctl_oid *sc_sysctl_ttyname; 138 struct sysctl_oid *sc_sysctl_ttyports; 139 char sc_ttyname[16]; 140 }; 141 142 struct ucom_softc { 143 /* 144 * NOTE: To avoid losing level change information we use two 145 * tasks instead of one for all commands. 146 * 147 * Level changes are transitions like: 148 * 149 * ON->OFF 150 * OFF->ON 151 * OPEN->CLOSE 152 * CLOSE->OPEN 153 */ 154 struct ucom_cfg_task sc_start_task[2]; 155 struct ucom_cfg_task sc_open_task[2]; 156 struct ucom_cfg_task sc_close_task[2]; 157 struct ucom_cfg_task sc_line_state_task[2]; 158 struct ucom_cfg_task sc_status_task[2]; 159 struct ucom_param_task sc_param_task[2]; 160 /* pulse capturing support, PPS */ 161 struct pps_state sc_pps; 162 /* Used to set "UCOM_FLAG_GP_DATA" flag: */ 163 struct usb_proc_msg *sc_last_start_xfer; 164 const struct ucom_callback *sc_callback; 165 struct ucom_super_softc *sc_super; 166 struct tty *sc_tty; 167 struct consdev *sc_consdev; 168 struct mtx *sc_mtx; 169 void *sc_parent; 170 int sc_subunit; 171 uint16_t sc_jitterbuf_in; 172 uint16_t sc_jitterbuf_out; 173 uint16_t sc_portno; 174 uint16_t sc_flag; 175 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */ 176 #define UCOM_FLAG_GONE 0x02 /* the device is gone */ 177 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */ 178 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */ 179 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */ 180 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */ 181 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */ 182 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */ 183 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */ 184 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */ 185 #define UCOM_FLAG_LSRTXIDLE 0x0800 /* set if sc_lsr bits ULSR_TSRE+TXRDY work */ 186 #define UCOM_FLAG_DEVICE_MODE 0x1000 /* set if we're an USB device, not a host */ 187 uint8_t sc_lsr; 188 uint8_t sc_msr; 189 uint8_t sc_mcr; 190 /* programmed line state bits */ 191 uint8_t sc_pls_set; /* set bits */ 192 uint8_t sc_pls_clr; /* cleared bits */ 193 uint8_t sc_pls_curr; /* last state */ 194 #define UCOM_LS_DTR 0x01 195 #define UCOM_LS_RTS 0x02 196 #define UCOM_LS_BREAK 0x04 197 #define UCOM_LS_RING 0x08 198 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE]; 199 }; 200 201 #define UCOM_MTX_ASSERT(sc, what) USB_MTX_ASSERT((sc)->sc_mtx, what) 202 #define UCOM_MTX_LOCK(sc) USB_MTX_LOCK((sc)->sc_mtx) 203 #define UCOM_MTX_UNLOCK(sc) USB_MTX_UNLOCK((sc)->sc_mtx) 204 #define UCOM_UNLOAD_DRAIN(x) \ 205 SYSUNINIT(var, SI_SUB_KLD - 2, SI_ORDER_ANY, ucom_drain_all, 0) 206 207 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \ 208 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo) 209 210 int ucom_attach(struct ucom_super_softc *, 211 struct ucom_softc *, int, void *, 212 const struct ucom_callback *callback, struct mtx *); 213 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *); 214 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t); 215 void ucom_set_usb_mode(struct ucom_super_softc *, enum usb_hc_mode); 216 void ucom_status_change(struct ucom_softc *); 217 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *, 218 uint32_t, uint32_t, uint32_t *); 219 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *, 220 uint32_t, uint32_t); 221 uint8_t ucom_cfg_is_gone(struct ucom_softc *); 222 void ucom_drain(struct ucom_super_softc *); 223 void ucom_drain_all(void *); 224 void ucom_ref(struct ucom_super_softc *); 225 int ucom_unref(struct ucom_super_softc *); 226 227 static inline void 228 ucom_use_lsr_txbits(struct ucom_softc *sc) 229 { 230 231 sc->sc_flag |= UCOM_FLAG_LSRTXIDLE; 232 } 233 234 #endif /* _USB_SERIAL_H_ */ 235