1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */ 2 /* $FreeBSD$ */ 3 4 /*- 5 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 /*- 31 * Copyright (c) 1999 The NetBSD Foundation, Inc. 32 * All rights reserved. 33 * 34 * This code is derived from software contributed to The NetBSD Foundation 35 * by Lennart Augustsson (lennart@augustsson.net) at 36 * Carlstedt Research & Technology. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * 2. Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in the 45 * documentation and/or other materials provided with the distribution. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 48 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 49 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 50 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 51 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 52 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 53 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 54 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 55 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 56 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 57 * POSSIBILITY OF SUCH DAMAGE. 58 */ 59 60 #ifndef _USB_SERIAL_H_ 61 #define _USB_SERIAL_H_ 62 63 #include <sys/tty.h> 64 #include <sys/serial.h> 65 #include <sys/fcntl.h> 66 #include <sys/sysctl.h> 67 #include <sys/timepps.h> 68 69 /* Module interface related macros */ 70 #define UCOM_MODVER 1 71 72 #define UCOM_MINVER 1 73 #define UCOM_PREFVER UCOM_MODVER 74 #define UCOM_MAXVER 1 75 #define UCOM_JITTERBUF_SIZE 128 /* bytes */ 76 77 struct usb_device; 78 struct ucom_softc; 79 struct usb_device_request; 80 struct thread; 81 82 /* 83 * NOTE: There is no guarantee that "ucom_cfg_close()" will 84 * be called after "ucom_cfg_open()" if the device is detached 85 * while it is open! 86 */ 87 struct ucom_callback { 88 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr); 89 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t); 90 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t); 91 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t); 92 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t); 93 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *); 94 void (*ucom_cfg_open) (struct ucom_softc *); 95 void (*ucom_cfg_close) (struct ucom_softc *); 96 int (*ucom_pre_open) (struct ucom_softc *); 97 int (*ucom_pre_param) (struct ucom_softc *, struct termios *); 98 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *); 99 void (*ucom_start_read) (struct ucom_softc *); 100 void (*ucom_stop_read) (struct ucom_softc *); 101 void (*ucom_start_write) (struct ucom_softc *); 102 void (*ucom_stop_write) (struct ucom_softc *); 103 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit); 104 void (*ucom_poll) (struct ucom_softc *); 105 void (*ucom_free) (struct ucom_softc *); 106 }; 107 108 /* Line status register */ 109 #define ULSR_RCV_FIFO 0x80 110 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */ 111 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */ 112 #define ULSR_BI 0x10 /* Break detected */ 113 #define ULSR_FE 0x08 /* Framing error: bad stop bit */ 114 #define ULSR_PE 0x04 /* Parity error */ 115 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */ 116 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */ 117 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */ 118 119 struct ucom_cfg_task { 120 struct usb_proc_msg hdr; 121 struct ucom_softc *sc; 122 }; 123 124 struct ucom_param_task { 125 struct usb_proc_msg hdr; 126 struct ucom_softc *sc; 127 struct termios termios_copy; 128 }; 129 130 struct ucom_super_softc { 131 struct usb_process sc_tq; 132 int sc_unit; 133 int sc_subunits; 134 int sc_refs; 135 int sc_flag; /* see UCOM_FLAG_XXX */ 136 struct sysctl_oid *sc_sysctl_ttyname; 137 struct sysctl_oid *sc_sysctl_ttyports; 138 char sc_ttyname[16]; 139 }; 140 141 struct ucom_softc { 142 /* 143 * NOTE: To avoid losing level change information we use two 144 * tasks instead of one for all commands. 145 * 146 * Level changes are transitions like: 147 * 148 * ON->OFF 149 * OFF->ON 150 * OPEN->CLOSE 151 * CLOSE->OPEN 152 */ 153 struct ucom_cfg_task sc_start_task[2]; 154 struct ucom_cfg_task sc_open_task[2]; 155 struct ucom_cfg_task sc_close_task[2]; 156 struct ucom_cfg_task sc_line_state_task[2]; 157 struct ucom_cfg_task sc_status_task[2]; 158 struct ucom_param_task sc_param_task[2]; 159 /* pulse capturing support, PPS */ 160 struct pps_state sc_pps; 161 /* Used to set "UCOM_FLAG_GP_DATA" flag: */ 162 struct usb_proc_msg *sc_last_start_xfer; 163 const struct ucom_callback *sc_callback; 164 struct ucom_super_softc *sc_super; 165 struct tty *sc_tty; 166 struct mtx *sc_mtx; 167 void *sc_parent; 168 int sc_subunit; 169 uint16_t sc_jitterbuf_in; 170 uint16_t sc_jitterbuf_out; 171 uint16_t sc_portno; 172 uint16_t sc_flag; 173 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */ 174 #define UCOM_FLAG_GONE 0x02 /* the device is gone */ 175 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */ 176 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */ 177 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */ 178 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */ 179 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */ 180 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */ 181 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */ 182 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */ 183 #define UCOM_FLAG_LSRTXIDLE 0x0800 /* set if sc_lsr bits ULSR_TSRE+TXRDY work */ 184 uint8_t sc_lsr; 185 uint8_t sc_msr; 186 uint8_t sc_mcr; 187 /* programmed line state bits */ 188 uint8_t sc_pls_set; /* set bits */ 189 uint8_t sc_pls_clr; /* cleared bits */ 190 uint8_t sc_pls_curr; /* last state */ 191 #define UCOM_LS_DTR 0x01 192 #define UCOM_LS_RTS 0x02 193 #define UCOM_LS_BREAK 0x04 194 #define UCOM_LS_RING 0x08 195 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE]; 196 }; 197 198 #define UCOM_MTX_ASSERT(sc, what) USB_MTX_ASSERT((sc)->sc_mtx, what) 199 #define UCOM_MTX_LOCK(sc) USB_MTX_LOCK((sc)->sc_mtx) 200 #define UCOM_MTX_UNLOCK(sc) USB_MTX_UNLOCK((sc)->sc_mtx) 201 #define UCOM_UNLOAD_DRAIN(x) \ 202 SYSUNINIT(var, SI_SUB_KLD - 2, SI_ORDER_ANY, ucom_drain_all, 0) 203 204 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \ 205 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo) 206 207 int ucom_attach(struct ucom_super_softc *, 208 struct ucom_softc *, int, void *, 209 const struct ucom_callback *callback, struct mtx *); 210 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *); 211 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t); 212 void ucom_status_change(struct ucom_softc *); 213 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *, 214 uint32_t, uint32_t, uint32_t *); 215 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *, 216 uint32_t, uint32_t); 217 uint8_t ucom_cfg_is_gone(struct ucom_softc *); 218 void ucom_drain(struct ucom_super_softc *); 219 void ucom_drain_all(void *); 220 void ucom_ref(struct ucom_super_softc *); 221 int ucom_unref(struct ucom_super_softc *); 222 223 static inline void 224 ucom_use_lsr_txbits(struct ucom_softc *sc) 225 { 226 227 sc->sc_flag |= UCOM_FLAG_LSRTXIDLE; 228 } 229 230 #endif /* _USB_SERIAL_H_ */ 231