1 /* $NetBSD: ucom.c,v 1.40 2001/11/13 06:24:54 lukem Exp $ */ 2 3 /*- 4 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-2-Clause-NetBSD 5 * 6 * Copyright (c) 2001-2003, 2005, 2008 7 * Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 8 * All rights reserved. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29 * SUCH DAMAGE. 30 */ 31 32 #include <sys/cdefs.h> 33 __FBSDID("$FreeBSD$"); 34 35 /*- 36 * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. 37 * All rights reserved. 38 * 39 * This code is derived from software contributed to The NetBSD Foundation 40 * by Lennart Augustsson (lennart@augustsson.net) at 41 * Carlstedt Research & Technology. 42 * 43 * Redistribution and use in source and binary forms, with or without 44 * modification, are permitted provided that the following conditions 45 * are met: 46 * 1. Redistributions of source code must retain the above copyright 47 * notice, this list of conditions and the following disclaimer. 48 * 2. Redistributions in binary form must reproduce the above copyright 49 * notice, this list of conditions and the following disclaimer in the 50 * documentation and/or other materials provided with the distribution. 51 * 52 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 53 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 54 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 55 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 56 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 57 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 58 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 59 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 60 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 61 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 62 * POSSIBILITY OF SUCH DAMAGE. 63 */ 64 65 #include <sys/stdint.h> 66 #include <sys/stddef.h> 67 #include <sys/param.h> 68 #include <sys/queue.h> 69 #include <sys/types.h> 70 #include <sys/systm.h> 71 #include <sys/kernel.h> 72 #include <sys/bus.h> 73 #include <sys/module.h> 74 #include <sys/lock.h> 75 #include <sys/mutex.h> 76 #include <sys/condvar.h> 77 #include <sys/sysctl.h> 78 #include <sys/sx.h> 79 #include <sys/unistd.h> 80 #include <sys/callout.h> 81 #include <sys/malloc.h> 82 #include <sys/priv.h> 83 #include <sys/cons.h> 84 85 #include <dev/uart/uart_ppstypes.h> 86 87 #include <dev/usb/usb.h> 88 #include <dev/usb/usbdi.h> 89 #include <dev/usb/usbdi_util.h> 90 91 #define USB_DEBUG_VAR ucom_debug 92 #include <dev/usb/usb_debug.h> 93 #include <dev/usb/usb_busdma.h> 94 #include <dev/usb/usb_process.h> 95 96 #include <dev/usb/serial/usb_serial.h> 97 98 #include "opt_gdb.h" 99 100 static SYSCTL_NODE(_hw_usb, OID_AUTO, ucom, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 101 "USB ucom"); 102 103 static int ucom_pps_mode; 104 105 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, pps_mode, CTLFLAG_RWTUN, 106 &ucom_pps_mode, 0, 107 "pulse capture mode: 0/1/2=disabled/CTS/DCD; add 0x10 to invert"); 108 109 static int ucom_device_mode_console = 1; 110 111 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, device_mode_console, CTLFLAG_RW, 112 &ucom_device_mode_console, 0, 113 "set to 1 to mark terminals as consoles when in device mode"); 114 115 #ifdef USB_DEBUG 116 static int ucom_debug = 0; 117 118 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, debug, CTLFLAG_RWTUN, 119 &ucom_debug, 0, "ucom debug level"); 120 #endif 121 122 #define UCOM_CONS_BUFSIZE 1024 123 124 static uint8_t ucom_cons_rx_buf[UCOM_CONS_BUFSIZE]; 125 static uint8_t ucom_cons_tx_buf[UCOM_CONS_BUFSIZE]; 126 127 static unsigned int ucom_cons_rx_low = 0; 128 static unsigned int ucom_cons_rx_high = 0; 129 130 static unsigned int ucom_cons_tx_low = 0; 131 static unsigned int ucom_cons_tx_high = 0; 132 133 static int ucom_cons_unit = -1; 134 static int ucom_cons_subunit = 0; 135 static int ucom_cons_baud = 9600; 136 static struct ucom_softc *ucom_cons_softc = NULL; 137 138 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_unit, CTLFLAG_RWTUN, 139 &ucom_cons_unit, 0, "console unit number"); 140 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_subunit, CTLFLAG_RWTUN, 141 &ucom_cons_subunit, 0, "console subunit number"); 142 SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_baud, CTLFLAG_RWTUN, 143 &ucom_cons_baud, 0, "console baud rate"); 144 145 static usb_proc_callback_t ucom_cfg_start_transfers; 146 static usb_proc_callback_t ucom_cfg_open; 147 static usb_proc_callback_t ucom_cfg_close; 148 static usb_proc_callback_t ucom_cfg_line_state; 149 static usb_proc_callback_t ucom_cfg_status_change; 150 static usb_proc_callback_t ucom_cfg_param; 151 152 static int ucom_unit_alloc(void); 153 static void ucom_unit_free(int); 154 static int ucom_attach_tty(struct ucom_super_softc *, struct ucom_softc *); 155 static void ucom_detach_tty(struct ucom_super_softc *, struct ucom_softc *); 156 static void ucom_queue_command(struct ucom_softc *, 157 usb_proc_callback_t *, struct termios *pt, 158 struct usb_proc_msg *t0, struct usb_proc_msg *t1); 159 static void ucom_shutdown(struct ucom_softc *); 160 static void ucom_ring(struct ucom_softc *, uint8_t); 161 static void ucom_break(struct ucom_softc *, uint8_t); 162 static void ucom_dtr(struct ucom_softc *, uint8_t); 163 static void ucom_rts(struct ucom_softc *, uint8_t); 164 165 static tsw_open_t ucom_open; 166 static tsw_close_t ucom_close; 167 static tsw_ioctl_t ucom_ioctl; 168 static tsw_modem_t ucom_modem; 169 static tsw_param_t ucom_param; 170 static tsw_outwakeup_t ucom_outwakeup; 171 static tsw_inwakeup_t ucom_inwakeup; 172 static tsw_free_t ucom_free; 173 static tsw_busy_t ucom_busy; 174 175 static struct ttydevsw ucom_class = { 176 .tsw_flags = TF_INITLOCK | TF_CALLOUT, 177 .tsw_open = ucom_open, 178 .tsw_close = ucom_close, 179 .tsw_outwakeup = ucom_outwakeup, 180 .tsw_inwakeup = ucom_inwakeup, 181 .tsw_ioctl = ucom_ioctl, 182 .tsw_param = ucom_param, 183 .tsw_modem = ucom_modem, 184 .tsw_free = ucom_free, 185 .tsw_busy = ucom_busy, 186 }; 187 188 MODULE_DEPEND(ucom, usb, 1, 1, 1); 189 MODULE_VERSION(ucom, 1); 190 191 #define UCOM_UNIT_MAX 128 /* maximum number of units */ 192 #define UCOM_TTY_PREFIX "U" 193 194 static struct unrhdr *ucom_unrhdr; 195 static struct mtx ucom_mtx; 196 static int ucom_close_refs; 197 198 static void 199 ucom_init(void *arg) 200 { 201 DPRINTF("\n"); 202 ucom_unrhdr = new_unrhdr(0, UCOM_UNIT_MAX - 1, NULL); 203 mtx_init(&ucom_mtx, "UCOM MTX", NULL, MTX_DEF); 204 } 205 SYSINIT(ucom_init, SI_SUB_KLD - 1, SI_ORDER_ANY, ucom_init, NULL); 206 207 static void 208 ucom_uninit(void *arg) 209 { 210 struct unrhdr *hdr; 211 hdr = ucom_unrhdr; 212 ucom_unrhdr = NULL; 213 214 DPRINTF("\n"); 215 216 if (hdr != NULL) 217 delete_unrhdr(hdr); 218 219 mtx_destroy(&ucom_mtx); 220 } 221 SYSUNINIT(ucom_uninit, SI_SUB_KLD - 3, SI_ORDER_ANY, ucom_uninit, NULL); 222 223 /* 224 * Mark a unit number (the X in cuaUX) as in use. 225 * 226 * Note that devices using a different naming scheme (see ucom_tty_name() 227 * callback) still use this unit allocation. 228 */ 229 static int 230 ucom_unit_alloc(void) 231 { 232 int unit; 233 234 /* sanity checks */ 235 if (ucom_unrhdr == NULL) { 236 DPRINTF("ucom_unrhdr is NULL\n"); 237 return (-1); 238 } 239 unit = alloc_unr(ucom_unrhdr); 240 DPRINTF("unit %d is allocated\n", unit); 241 return (unit); 242 } 243 244 /* 245 * Mark the unit number as not in use. 246 */ 247 static void 248 ucom_unit_free(int unit) 249 { 250 /* sanity checks */ 251 if (unit < 0 || unit >= UCOM_UNIT_MAX || ucom_unrhdr == NULL) { 252 DPRINTF("cannot free unit number\n"); 253 return; 254 } 255 DPRINTF("unit %d is freed\n", unit); 256 free_unr(ucom_unrhdr, unit); 257 } 258 259 /* 260 * Setup a group of one or more serial ports. 261 * 262 * The mutex pointed to by "mtx" is applied before all 263 * callbacks are called back. Also "mtx" must be applied 264 * before calling into the ucom-layer! 265 */ 266 int 267 ucom_attach(struct ucom_super_softc *ssc, struct ucom_softc *sc, 268 int subunits, void *parent, 269 const struct ucom_callback *callback, struct mtx *mtx) 270 { 271 int subunit; 272 int error = 0; 273 274 if ((sc == NULL) || 275 (subunits <= 0) || 276 (callback == NULL) || 277 (mtx == NULL)) { 278 return (EINVAL); 279 } 280 281 /* allocate a uniq unit number */ 282 ssc->sc_unit = ucom_unit_alloc(); 283 if (ssc->sc_unit == -1) 284 return (ENOMEM); 285 286 /* generate TTY name string */ 287 snprintf(ssc->sc_ttyname, sizeof(ssc->sc_ttyname), 288 UCOM_TTY_PREFIX "%d", ssc->sc_unit); 289 290 /* create USB request handling process */ 291 error = usb_proc_create(&ssc->sc_tq, mtx, "ucom", USB_PRI_MED); 292 if (error) { 293 ucom_unit_free(ssc->sc_unit); 294 return (error); 295 } 296 ssc->sc_subunits = subunits; 297 ssc->sc_flag = UCOM_FLAG_ATTACHED | 298 UCOM_FLAG_FREE_UNIT | (ssc->sc_flag & UCOM_FLAG_DEVICE_MODE); 299 300 if (callback->ucom_free == NULL) 301 ssc->sc_flag |= UCOM_FLAG_WAIT_REFS; 302 303 /* increment reference count */ 304 ucom_ref(ssc); 305 306 for (subunit = 0; subunit < ssc->sc_subunits; subunit++) { 307 sc[subunit].sc_subunit = subunit; 308 sc[subunit].sc_super = ssc; 309 sc[subunit].sc_mtx = mtx; 310 sc[subunit].sc_parent = parent; 311 sc[subunit].sc_callback = callback; 312 313 error = ucom_attach_tty(ssc, &sc[subunit]); 314 if (error) { 315 ucom_detach(ssc, &sc[0]); 316 return (error); 317 } 318 /* increment reference count */ 319 ucom_ref(ssc); 320 321 /* set subunit attached */ 322 sc[subunit].sc_flag |= UCOM_FLAG_ATTACHED; 323 } 324 325 DPRINTF("tp = %p, unit = %d, subunits = %d\n", 326 sc->sc_tty, ssc->sc_unit, ssc->sc_subunits); 327 328 return (0); 329 } 330 331 /* 332 * The following function will do nothing if the structure pointed to 333 * by "ssc" and "sc" is zero or has already been detached. 334 */ 335 void 336 ucom_detach(struct ucom_super_softc *ssc, struct ucom_softc *sc) 337 { 338 int subunit; 339 340 if (!(ssc->sc_flag & UCOM_FLAG_ATTACHED)) 341 return; /* not initialized */ 342 343 if (ssc->sc_sysctl_ttyname != NULL) { 344 sysctl_remove_oid(ssc->sc_sysctl_ttyname, 1, 0); 345 ssc->sc_sysctl_ttyname = NULL; 346 } 347 348 if (ssc->sc_sysctl_ttyports != NULL) { 349 sysctl_remove_oid(ssc->sc_sysctl_ttyports, 1, 0); 350 ssc->sc_sysctl_ttyports = NULL; 351 } 352 353 usb_proc_drain(&ssc->sc_tq); 354 355 for (subunit = 0; subunit < ssc->sc_subunits; subunit++) { 356 if (sc[subunit].sc_flag & UCOM_FLAG_ATTACHED) { 357 ucom_detach_tty(ssc, &sc[subunit]); 358 359 /* avoid duplicate detach */ 360 sc[subunit].sc_flag &= ~UCOM_FLAG_ATTACHED; 361 } 362 } 363 usb_proc_free(&ssc->sc_tq); 364 365 ucom_unref(ssc); 366 367 if (ssc->sc_flag & UCOM_FLAG_WAIT_REFS) 368 ucom_drain(ssc); 369 370 /* make sure we don't detach twice */ 371 ssc->sc_flag &= ~UCOM_FLAG_ATTACHED; 372 } 373 374 void 375 ucom_drain(struct ucom_super_softc *ssc) 376 { 377 mtx_lock(&ucom_mtx); 378 while (ssc->sc_refs > 0) { 379 printf("ucom: Waiting for a TTY device to close.\n"); 380 usb_pause_mtx(&ucom_mtx, hz); 381 } 382 mtx_unlock(&ucom_mtx); 383 } 384 385 void 386 ucom_drain_all(void *arg) 387 { 388 mtx_lock(&ucom_mtx); 389 while (ucom_close_refs > 0) { 390 printf("ucom: Waiting for all detached TTY " 391 "devices to have open fds closed.\n"); 392 usb_pause_mtx(&ucom_mtx, hz); 393 } 394 mtx_unlock(&ucom_mtx); 395 } 396 397 static cn_probe_t ucom_cnprobe; 398 static cn_init_t ucom_cninit; 399 static cn_term_t ucom_cnterm; 400 static cn_getc_t ucom_cngetc; 401 static cn_putc_t ucom_cnputc; 402 static cn_grab_t ucom_cngrab; 403 static cn_ungrab_t ucom_cnungrab; 404 405 const struct consdev_ops ucom_cnops = { 406 .cn_probe = ucom_cnprobe, 407 .cn_init = ucom_cninit, 408 .cn_term = ucom_cnterm, 409 .cn_getc = ucom_cngetc, 410 .cn_putc = ucom_cnputc, 411 .cn_grab = ucom_cngrab, 412 .cn_ungrab = ucom_cnungrab, 413 }; 414 415 static int 416 ucom_attach_tty(struct ucom_super_softc *ssc, struct ucom_softc *sc) 417 { 418 struct tty *tp; 419 char buf[32]; /* temporary TTY device name buffer */ 420 421 tp = tty_alloc_mutex(&ucom_class, sc, sc->sc_mtx); 422 if (tp == NULL) 423 return (ENOMEM); 424 425 /* Check if the client has a custom TTY name */ 426 buf[0] = '\0'; 427 if (sc->sc_callback->ucom_tty_name) { 428 sc->sc_callback->ucom_tty_name(sc, buf, 429 sizeof(buf), ssc->sc_unit, sc->sc_subunit); 430 } 431 if (buf[0] == 0) { 432 /* Use default TTY name */ 433 if (ssc->sc_subunits > 1) { 434 /* multiple modems in one */ 435 snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u.%u", 436 ssc->sc_unit, sc->sc_subunit); 437 } else { 438 /* single modem */ 439 snprintf(buf, sizeof(buf), UCOM_TTY_PREFIX "%u", 440 ssc->sc_unit); 441 } 442 } 443 tty_makedev(tp, NULL, "%s", buf); 444 445 sc->sc_tty = tp; 446 447 sc->sc_pps.ppscap = PPS_CAPTUREBOTH; 448 sc->sc_pps.driver_abi = PPS_ABI_VERSION; 449 sc->sc_pps.driver_mtx = sc->sc_mtx; 450 pps_init_abi(&sc->sc_pps); 451 452 DPRINTF("ttycreate: %s\n", buf); 453 454 /* Check if this device should be a console */ 455 if ((ucom_cons_softc == NULL) && 456 (ssc->sc_unit == ucom_cons_unit) && 457 (sc->sc_subunit == ucom_cons_subunit)) { 458 DPRINTF("unit %d subunit %d is console", 459 ssc->sc_unit, sc->sc_subunit); 460 461 ucom_cons_softc = sc; 462 463 tty_init_console(tp, ucom_cons_baud); 464 465 UCOM_MTX_LOCK(ucom_cons_softc); 466 ucom_cons_rx_low = 0; 467 ucom_cons_rx_high = 0; 468 ucom_cons_tx_low = 0; 469 ucom_cons_tx_high = 0; 470 sc->sc_flag |= UCOM_FLAG_CONSOLE; 471 ucom_open(ucom_cons_softc->sc_tty); 472 ucom_param(ucom_cons_softc->sc_tty, &tp->t_termios_init_in); 473 UCOM_MTX_UNLOCK(ucom_cons_softc); 474 } 475 476 if ((ssc->sc_flag & UCOM_FLAG_DEVICE_MODE) != 0 && 477 ucom_device_mode_console > 0 && 478 ucom_cons_softc == NULL) { 479 struct consdev *cp; 480 481 cp = malloc(sizeof(struct consdev), M_USBDEV, 482 M_WAITOK|M_ZERO); 483 cp->cn_ops = &ucom_cnops; 484 cp->cn_arg = NULL; 485 cp->cn_pri = CN_NORMAL; 486 strlcpy(cp->cn_name, "tty", sizeof(cp->cn_name)); 487 strlcat(cp->cn_name, buf, sizeof(cp->cn_name)); 488 489 sc->sc_consdev = cp; 490 491 cnadd(cp); 492 } 493 494 return (0); 495 } 496 497 static void 498 ucom_detach_tty(struct ucom_super_softc *ssc, struct ucom_softc *sc) 499 { 500 struct tty *tp = sc->sc_tty; 501 502 DPRINTF("sc = %p, tp = %p\n", sc, sc->sc_tty); 503 504 if (sc->sc_consdev != NULL) { 505 cnremove(sc->sc_consdev); 506 free(sc->sc_consdev, M_USBDEV); 507 sc->sc_consdev = NULL; 508 } 509 510 if (sc->sc_flag & UCOM_FLAG_CONSOLE) { 511 UCOM_MTX_LOCK(ucom_cons_softc); 512 ucom_close(ucom_cons_softc->sc_tty); 513 sc->sc_flag &= ~UCOM_FLAG_CONSOLE; 514 UCOM_MTX_UNLOCK(ucom_cons_softc); 515 ucom_cons_softc = NULL; 516 } 517 518 /* the config thread has been stopped when we get here */ 519 520 UCOM_MTX_LOCK(sc); 521 sc->sc_flag |= UCOM_FLAG_GONE; 522 sc->sc_flag &= ~(UCOM_FLAG_HL_READY | UCOM_FLAG_LL_READY); 523 UCOM_MTX_UNLOCK(sc); 524 525 if (tp) { 526 mtx_lock(&ucom_mtx); 527 ucom_close_refs++; 528 mtx_unlock(&ucom_mtx); 529 530 tty_lock(tp); 531 532 ucom_close(tp); /* close, if any */ 533 534 tty_rel_gone(tp); 535 536 UCOM_MTX_LOCK(sc); 537 /* 538 * make sure that read and write transfers are stopped 539 */ 540 if (sc->sc_callback->ucom_stop_read) 541 (sc->sc_callback->ucom_stop_read) (sc); 542 if (sc->sc_callback->ucom_stop_write) 543 (sc->sc_callback->ucom_stop_write) (sc); 544 UCOM_MTX_UNLOCK(sc); 545 } 546 } 547 548 void 549 ucom_set_pnpinfo_usb(struct ucom_super_softc *ssc, device_t dev) 550 { 551 char buf[64]; 552 uint8_t iface_index; 553 struct usb_attach_arg *uaa; 554 555 snprintf(buf, sizeof(buf), "ttyname=" UCOM_TTY_PREFIX 556 "%d ttyports=%d", ssc->sc_unit, ssc->sc_subunits); 557 558 /* Store the PNP info in the first interface for the device */ 559 uaa = device_get_ivars(dev); 560 iface_index = uaa->info.bIfaceIndex; 561 562 if (usbd_set_pnpinfo(uaa->device, iface_index, buf) != 0) 563 device_printf(dev, "Could not set PNP info\n"); 564 565 /* 566 * The following information is also replicated in the PNP-info 567 * string which is registered above: 568 */ 569 if (ssc->sc_sysctl_ttyname == NULL) { 570 ssc->sc_sysctl_ttyname = SYSCTL_ADD_STRING(NULL, 571 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 572 OID_AUTO, "ttyname", CTLFLAG_RD, ssc->sc_ttyname, 0, 573 "TTY device basename"); 574 } 575 if (ssc->sc_sysctl_ttyports == NULL) { 576 ssc->sc_sysctl_ttyports = SYSCTL_ADD_INT(NULL, 577 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), 578 OID_AUTO, "ttyports", CTLFLAG_RD, 579 NULL, ssc->sc_subunits, "Number of ports"); 580 } 581 } 582 583 void 584 ucom_set_usb_mode(struct ucom_super_softc *ssc, enum usb_hc_mode usb_mode) 585 { 586 587 switch (usb_mode) { 588 case USB_MODE_DEVICE: 589 ssc->sc_flag |= UCOM_FLAG_DEVICE_MODE; 590 break; 591 default: 592 ssc->sc_flag &= ~UCOM_FLAG_DEVICE_MODE; 593 break; 594 } 595 } 596 597 static void 598 ucom_queue_command(struct ucom_softc *sc, 599 usb_proc_callback_t *fn, struct termios *pt, 600 struct usb_proc_msg *t0, struct usb_proc_msg *t1) 601 { 602 struct ucom_super_softc *ssc = sc->sc_super; 603 struct ucom_param_task *task; 604 605 UCOM_MTX_ASSERT(sc, MA_OWNED); 606 607 if (usb_proc_is_gone(&ssc->sc_tq)) { 608 DPRINTF("proc is gone\n"); 609 return; /* nothing to do */ 610 } 611 /* 612 * NOTE: The task cannot get executed before we drop the 613 * "sc_mtx" mutex. It is safe to update fields in the message 614 * structure after that the message got queued. 615 */ 616 task = (struct ucom_param_task *) 617 usb_proc_msignal(&ssc->sc_tq, t0, t1); 618 619 /* Setup callback and softc pointers */ 620 task->hdr.pm_callback = fn; 621 task->sc = sc; 622 623 /* 624 * Make a copy of the termios. This field is only present if 625 * the "pt" field is not NULL. 626 */ 627 if (pt != NULL) 628 task->termios_copy = *pt; 629 630 /* 631 * Closing the device should be synchronous. 632 */ 633 if (fn == ucom_cfg_close) 634 usb_proc_mwait(&ssc->sc_tq, t0, t1); 635 636 /* 637 * In case of multiple configure requests, 638 * keep track of the last one! 639 */ 640 if (fn == ucom_cfg_start_transfers) 641 sc->sc_last_start_xfer = &task->hdr; 642 } 643 644 static void 645 ucom_shutdown(struct ucom_softc *sc) 646 { 647 struct tty *tp = sc->sc_tty; 648 649 UCOM_MTX_ASSERT(sc, MA_OWNED); 650 651 DPRINTF("\n"); 652 653 /* 654 * Hang up if necessary: 655 */ 656 if (tp->t_termios.c_cflag & HUPCL) { 657 ucom_modem(tp, 0, SER_DTR); 658 } 659 } 660 661 /* 662 * Return values: 663 * 0: normal 664 * else: taskqueue is draining or gone 665 */ 666 uint8_t 667 ucom_cfg_is_gone(struct ucom_softc *sc) 668 { 669 struct ucom_super_softc *ssc = sc->sc_super; 670 671 return (usb_proc_is_gone(&ssc->sc_tq)); 672 } 673 674 static void 675 ucom_cfg_start_transfers(struct usb_proc_msg *_task) 676 { 677 struct ucom_cfg_task *task = 678 (struct ucom_cfg_task *)_task; 679 struct ucom_softc *sc = task->sc; 680 681 if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) { 682 return; 683 } 684 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 685 /* TTY device closed */ 686 return; 687 } 688 689 if (_task == sc->sc_last_start_xfer) 690 sc->sc_flag |= UCOM_FLAG_GP_DATA; 691 692 if (sc->sc_callback->ucom_start_read) { 693 (sc->sc_callback->ucom_start_read) (sc); 694 } 695 if (sc->sc_callback->ucom_start_write) { 696 (sc->sc_callback->ucom_start_write) (sc); 697 } 698 } 699 700 static void 701 ucom_start_transfers(struct ucom_softc *sc) 702 { 703 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 704 return; 705 } 706 /* 707 * Make sure that data transfers are started in both 708 * directions: 709 */ 710 if (sc->sc_callback->ucom_start_read) { 711 (sc->sc_callback->ucom_start_read) (sc); 712 } 713 if (sc->sc_callback->ucom_start_write) { 714 (sc->sc_callback->ucom_start_write) (sc); 715 } 716 } 717 718 static void 719 ucom_cfg_open(struct usb_proc_msg *_task) 720 { 721 struct ucom_cfg_task *task = 722 (struct ucom_cfg_task *)_task; 723 struct ucom_softc *sc = task->sc; 724 725 DPRINTF("\n"); 726 727 if (sc->sc_flag & UCOM_FLAG_LL_READY) { 728 /* already opened */ 729 730 } else { 731 sc->sc_flag |= UCOM_FLAG_LL_READY; 732 733 if (sc->sc_callback->ucom_cfg_open) { 734 (sc->sc_callback->ucom_cfg_open) (sc); 735 736 /* wait a little */ 737 usb_pause_mtx(sc->sc_mtx, hz / 10); 738 } 739 } 740 } 741 742 static int 743 ucom_open(struct tty *tp) 744 { 745 struct ucom_softc *sc = tty_softc(tp); 746 int error; 747 748 UCOM_MTX_ASSERT(sc, MA_OWNED); 749 750 if (sc->sc_flag & UCOM_FLAG_GONE) { 751 return (ENXIO); 752 } 753 if (sc->sc_flag & UCOM_FLAG_HL_READY) { 754 /* already opened */ 755 return (0); 756 } 757 DPRINTF("tp = %p\n", tp); 758 759 if (sc->sc_callback->ucom_pre_open) { 760 /* 761 * give the lower layer a chance to disallow TTY open, for 762 * example if the device is not present: 763 */ 764 error = (sc->sc_callback->ucom_pre_open) (sc); 765 if (error) { 766 return (error); 767 } 768 } 769 sc->sc_flag |= UCOM_FLAG_HL_READY; 770 771 /* Disable transfers */ 772 sc->sc_flag &= ~UCOM_FLAG_GP_DATA; 773 774 sc->sc_lsr = 0; 775 sc->sc_msr = 0; 776 sc->sc_mcr = 0; 777 778 /* reset programmed line state */ 779 sc->sc_pls_curr = 0; 780 sc->sc_pls_set = 0; 781 sc->sc_pls_clr = 0; 782 783 /* reset jitter buffer */ 784 sc->sc_jitterbuf_in = 0; 785 sc->sc_jitterbuf_out = 0; 786 787 ucom_queue_command(sc, ucom_cfg_open, NULL, 788 &sc->sc_open_task[0].hdr, 789 &sc->sc_open_task[1].hdr); 790 791 /* Queue transfer enable command last */ 792 ucom_queue_command(sc, ucom_cfg_start_transfers, NULL, 793 &sc->sc_start_task[0].hdr, 794 &sc->sc_start_task[1].hdr); 795 796 if (sc->sc_tty == NULL || (sc->sc_tty->t_termios.c_cflag & CNO_RTSDTR) == 0) 797 ucom_modem(tp, SER_DTR | SER_RTS, 0); 798 799 ucom_ring(sc, 0); 800 801 ucom_break(sc, 0); 802 803 ucom_status_change(sc); 804 805 return (0); 806 } 807 808 static void 809 ucom_cfg_close(struct usb_proc_msg *_task) 810 { 811 struct ucom_cfg_task *task = 812 (struct ucom_cfg_task *)_task; 813 struct ucom_softc *sc = task->sc; 814 815 DPRINTF("\n"); 816 817 if (sc->sc_flag & UCOM_FLAG_LL_READY) { 818 sc->sc_flag &= ~UCOM_FLAG_LL_READY; 819 if (sc->sc_callback->ucom_cfg_close) 820 (sc->sc_callback->ucom_cfg_close) (sc); 821 } else { 822 /* already closed */ 823 } 824 } 825 826 static void 827 ucom_close(struct tty *tp) 828 { 829 struct ucom_softc *sc = tty_softc(tp); 830 831 UCOM_MTX_ASSERT(sc, MA_OWNED); 832 833 DPRINTF("tp=%p\n", tp); 834 835 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 836 DPRINTF("tp=%p already closed\n", tp); 837 return; 838 } 839 ucom_shutdown(sc); 840 841 ucom_queue_command(sc, ucom_cfg_close, NULL, 842 &sc->sc_close_task[0].hdr, 843 &sc->sc_close_task[1].hdr); 844 845 sc->sc_flag &= ~(UCOM_FLAG_HL_READY | UCOM_FLAG_RTS_IFLOW); 846 847 if (sc->sc_callback->ucom_stop_read) { 848 (sc->sc_callback->ucom_stop_read) (sc); 849 } 850 } 851 852 static void 853 ucom_inwakeup(struct tty *tp) 854 { 855 struct ucom_softc *sc = tty_softc(tp); 856 uint16_t pos; 857 858 if (sc == NULL) 859 return; 860 861 UCOM_MTX_ASSERT(sc, MA_OWNED); 862 863 DPRINTF("tp=%p\n", tp); 864 865 if (ttydisc_can_bypass(tp) != 0 || 866 (sc->sc_flag & UCOM_FLAG_HL_READY) == 0 || 867 (sc->sc_flag & UCOM_FLAG_INWAKEUP) != 0) { 868 return; 869 } 870 871 /* prevent recursion */ 872 sc->sc_flag |= UCOM_FLAG_INWAKEUP; 873 874 pos = sc->sc_jitterbuf_out; 875 876 while (sc->sc_jitterbuf_in != pos) { 877 int c; 878 879 c = (char)sc->sc_jitterbuf[pos]; 880 881 if (ttydisc_rint(tp, c, 0) == -1) 882 break; 883 pos++; 884 if (pos >= UCOM_JITTERBUF_SIZE) 885 pos -= UCOM_JITTERBUF_SIZE; 886 } 887 888 sc->sc_jitterbuf_out = pos; 889 890 /* clear RTS in async fashion */ 891 if ((sc->sc_jitterbuf_in == pos) && 892 (sc->sc_flag & UCOM_FLAG_RTS_IFLOW)) 893 ucom_rts(sc, 0); 894 895 sc->sc_flag &= ~UCOM_FLAG_INWAKEUP; 896 } 897 898 static int 899 ucom_ioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td) 900 { 901 struct ucom_softc *sc = tty_softc(tp); 902 int error; 903 904 UCOM_MTX_ASSERT(sc, MA_OWNED); 905 906 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 907 return (EIO); 908 } 909 DPRINTF("cmd = 0x%08lx\n", cmd); 910 911 switch (cmd) { 912 #if 0 913 case TIOCSRING: 914 ucom_ring(sc, 1); 915 error = 0; 916 break; 917 case TIOCCRING: 918 ucom_ring(sc, 0); 919 error = 0; 920 break; 921 #endif 922 case TIOCSBRK: 923 ucom_break(sc, 1); 924 error = 0; 925 break; 926 case TIOCCBRK: 927 ucom_break(sc, 0); 928 error = 0; 929 break; 930 default: 931 if (sc->sc_callback->ucom_ioctl) { 932 error = (sc->sc_callback->ucom_ioctl) 933 (sc, cmd, data, 0, td); 934 } else { 935 error = ENOIOCTL; 936 } 937 if (error == ENOIOCTL) 938 error = pps_ioctl(cmd, data, &sc->sc_pps); 939 break; 940 } 941 return (error); 942 } 943 944 static int 945 ucom_modem(struct tty *tp, int sigon, int sigoff) 946 { 947 struct ucom_softc *sc = tty_softc(tp); 948 uint8_t onoff; 949 950 UCOM_MTX_ASSERT(sc, MA_OWNED); 951 952 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 953 return (0); 954 } 955 if ((sigon == 0) && (sigoff == 0)) { 956 if (sc->sc_mcr & SER_DTR) { 957 sigon |= SER_DTR; 958 } 959 if (sc->sc_mcr & SER_RTS) { 960 sigon |= SER_RTS; 961 } 962 if (sc->sc_msr & SER_CTS) { 963 sigon |= SER_CTS; 964 } 965 if (sc->sc_msr & SER_DCD) { 966 sigon |= SER_DCD; 967 } 968 if (sc->sc_msr & SER_DSR) { 969 sigon |= SER_DSR; 970 } 971 if (sc->sc_msr & SER_RI) { 972 sigon |= SER_RI; 973 } 974 return (sigon); 975 } 976 if (sigon & SER_DTR) { 977 sc->sc_mcr |= SER_DTR; 978 } 979 if (sigoff & SER_DTR) { 980 sc->sc_mcr &= ~SER_DTR; 981 } 982 if (sigon & SER_RTS) { 983 sc->sc_mcr |= SER_RTS; 984 } 985 if (sigoff & SER_RTS) { 986 sc->sc_mcr &= ~SER_RTS; 987 } 988 onoff = (sc->sc_mcr & SER_DTR) ? 1 : 0; 989 ucom_dtr(sc, onoff); 990 991 onoff = (sc->sc_mcr & SER_RTS) ? 1 : 0; 992 ucom_rts(sc, onoff); 993 994 return (0); 995 } 996 997 static void 998 ucom_cfg_line_state(struct usb_proc_msg *_task) 999 { 1000 struct ucom_cfg_task *task = 1001 (struct ucom_cfg_task *)_task; 1002 struct ucom_softc *sc = task->sc; 1003 uint8_t notch_bits; 1004 uint8_t any_bits; 1005 uint8_t prev_value; 1006 uint8_t last_value; 1007 uint8_t mask; 1008 1009 if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) { 1010 return; 1011 } 1012 1013 mask = 0; 1014 /* compute callback mask */ 1015 if (sc->sc_callback->ucom_cfg_set_dtr) 1016 mask |= UCOM_LS_DTR; 1017 if (sc->sc_callback->ucom_cfg_set_rts) 1018 mask |= UCOM_LS_RTS; 1019 if (sc->sc_callback->ucom_cfg_set_break) 1020 mask |= UCOM_LS_BREAK; 1021 if (sc->sc_callback->ucom_cfg_set_ring) 1022 mask |= UCOM_LS_RING; 1023 1024 /* compute the bits we are to program */ 1025 notch_bits = (sc->sc_pls_set & sc->sc_pls_clr) & mask; 1026 any_bits = (sc->sc_pls_set | sc->sc_pls_clr) & mask; 1027 prev_value = sc->sc_pls_curr ^ notch_bits; 1028 last_value = sc->sc_pls_curr; 1029 1030 /* reset programmed line state */ 1031 sc->sc_pls_curr = 0; 1032 sc->sc_pls_set = 0; 1033 sc->sc_pls_clr = 0; 1034 1035 /* ensure that we don't lose any levels */ 1036 if (notch_bits & UCOM_LS_DTR) 1037 sc->sc_callback->ucom_cfg_set_dtr(sc, 1038 (prev_value & UCOM_LS_DTR) ? 1 : 0); 1039 if (notch_bits & UCOM_LS_RTS) 1040 sc->sc_callback->ucom_cfg_set_rts(sc, 1041 (prev_value & UCOM_LS_RTS) ? 1 : 0); 1042 if (notch_bits & UCOM_LS_BREAK) 1043 sc->sc_callback->ucom_cfg_set_break(sc, 1044 (prev_value & UCOM_LS_BREAK) ? 1 : 0); 1045 if (notch_bits & UCOM_LS_RING) 1046 sc->sc_callback->ucom_cfg_set_ring(sc, 1047 (prev_value & UCOM_LS_RING) ? 1 : 0); 1048 1049 /* set last value */ 1050 if (any_bits & UCOM_LS_DTR) 1051 sc->sc_callback->ucom_cfg_set_dtr(sc, 1052 (last_value & UCOM_LS_DTR) ? 1 : 0); 1053 if (any_bits & UCOM_LS_RTS) 1054 sc->sc_callback->ucom_cfg_set_rts(sc, 1055 (last_value & UCOM_LS_RTS) ? 1 : 0); 1056 if (any_bits & UCOM_LS_BREAK) 1057 sc->sc_callback->ucom_cfg_set_break(sc, 1058 (last_value & UCOM_LS_BREAK) ? 1 : 0); 1059 if (any_bits & UCOM_LS_RING) 1060 sc->sc_callback->ucom_cfg_set_ring(sc, 1061 (last_value & UCOM_LS_RING) ? 1 : 0); 1062 } 1063 1064 static void 1065 ucom_line_state(struct ucom_softc *sc, 1066 uint8_t set_bits, uint8_t clear_bits) 1067 { 1068 UCOM_MTX_ASSERT(sc, MA_OWNED); 1069 1070 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 1071 return; 1072 } 1073 1074 DPRINTF("on=0x%02x, off=0x%02x\n", set_bits, clear_bits); 1075 1076 /* update current programmed line state */ 1077 sc->sc_pls_curr |= set_bits; 1078 sc->sc_pls_curr &= ~clear_bits; 1079 sc->sc_pls_set |= set_bits; 1080 sc->sc_pls_clr |= clear_bits; 1081 1082 /* defer driver programming */ 1083 ucom_queue_command(sc, ucom_cfg_line_state, NULL, 1084 &sc->sc_line_state_task[0].hdr, 1085 &sc->sc_line_state_task[1].hdr); 1086 } 1087 1088 static void 1089 ucom_ring(struct ucom_softc *sc, uint8_t onoff) 1090 { 1091 DPRINTF("onoff = %d\n", onoff); 1092 1093 if (onoff) 1094 ucom_line_state(sc, UCOM_LS_RING, 0); 1095 else 1096 ucom_line_state(sc, 0, UCOM_LS_RING); 1097 } 1098 1099 static void 1100 ucom_break(struct ucom_softc *sc, uint8_t onoff) 1101 { 1102 DPRINTF("onoff = %d\n", onoff); 1103 1104 if (onoff) 1105 ucom_line_state(sc, UCOM_LS_BREAK, 0); 1106 else 1107 ucom_line_state(sc, 0, UCOM_LS_BREAK); 1108 } 1109 1110 static void 1111 ucom_dtr(struct ucom_softc *sc, uint8_t onoff) 1112 { 1113 DPRINTF("onoff = %d\n", onoff); 1114 1115 if (onoff) 1116 ucom_line_state(sc, UCOM_LS_DTR, 0); 1117 else 1118 ucom_line_state(sc, 0, UCOM_LS_DTR); 1119 } 1120 1121 static void 1122 ucom_rts(struct ucom_softc *sc, uint8_t onoff) 1123 { 1124 DPRINTF("onoff = %d\n", onoff); 1125 1126 if (onoff) 1127 ucom_line_state(sc, UCOM_LS_RTS, 0); 1128 else 1129 ucom_line_state(sc, 0, UCOM_LS_RTS); 1130 } 1131 1132 static void 1133 ucom_cfg_status_change(struct usb_proc_msg *_task) 1134 { 1135 struct ucom_cfg_task *task = 1136 (struct ucom_cfg_task *)_task; 1137 struct ucom_softc *sc = task->sc; 1138 struct tty *tp; 1139 int onoff; 1140 uint8_t new_msr; 1141 uint8_t new_lsr; 1142 uint8_t msr_delta; 1143 uint8_t lsr_delta; 1144 uint8_t pps_signal; 1145 1146 tp = sc->sc_tty; 1147 1148 UCOM_MTX_ASSERT(sc, MA_OWNED); 1149 1150 if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) { 1151 return; 1152 } 1153 if (sc->sc_callback->ucom_cfg_get_status == NULL) { 1154 return; 1155 } 1156 /* get status */ 1157 1158 new_msr = 0; 1159 new_lsr = 0; 1160 1161 (sc->sc_callback->ucom_cfg_get_status) (sc, &new_lsr, &new_msr); 1162 1163 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 1164 /* TTY device closed */ 1165 return; 1166 } 1167 msr_delta = (sc->sc_msr ^ new_msr); 1168 lsr_delta = (sc->sc_lsr ^ new_lsr); 1169 1170 sc->sc_msr = new_msr; 1171 sc->sc_lsr = new_lsr; 1172 1173 /* 1174 * Time pulse counting support. 1175 */ 1176 switch(ucom_pps_mode & UART_PPS_SIGNAL_MASK) { 1177 case UART_PPS_CTS: 1178 pps_signal = SER_CTS; 1179 break; 1180 case UART_PPS_DCD: 1181 pps_signal = SER_DCD; 1182 break; 1183 default: 1184 pps_signal = 0; 1185 break; 1186 } 1187 1188 if ((sc->sc_pps.ppsparam.mode & PPS_CAPTUREBOTH) && 1189 (msr_delta & pps_signal)) { 1190 pps_capture(&sc->sc_pps); 1191 onoff = (sc->sc_msr & pps_signal) ? 1 : 0; 1192 if (ucom_pps_mode & UART_PPS_INVERT_PULSE) 1193 onoff = !onoff; 1194 pps_event(&sc->sc_pps, onoff ? PPS_CAPTUREASSERT : 1195 PPS_CAPTURECLEAR); 1196 } 1197 1198 if (msr_delta & SER_DCD) { 1199 onoff = (sc->sc_msr & SER_DCD) ? 1 : 0; 1200 1201 DPRINTF("DCD changed to %d\n", onoff); 1202 1203 ttydisc_modem(tp, onoff); 1204 } 1205 1206 if ((lsr_delta & ULSR_BI) && (sc->sc_lsr & ULSR_BI)) { 1207 DPRINTF("BREAK detected\n"); 1208 1209 ttydisc_rint(tp, 0, TRE_BREAK); 1210 ttydisc_rint_done(tp); 1211 } 1212 1213 if ((lsr_delta & ULSR_FE) && (sc->sc_lsr & ULSR_FE)) { 1214 DPRINTF("Frame error detected\n"); 1215 1216 ttydisc_rint(tp, 0, TRE_FRAMING); 1217 ttydisc_rint_done(tp); 1218 } 1219 1220 if ((lsr_delta & ULSR_PE) && (sc->sc_lsr & ULSR_PE)) { 1221 DPRINTF("Parity error detected\n"); 1222 1223 ttydisc_rint(tp, 0, TRE_PARITY); 1224 ttydisc_rint_done(tp); 1225 } 1226 } 1227 1228 void 1229 ucom_status_change(struct ucom_softc *sc) 1230 { 1231 UCOM_MTX_ASSERT(sc, MA_OWNED); 1232 1233 if (sc->sc_flag & UCOM_FLAG_CONSOLE) 1234 return; /* not supported */ 1235 1236 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 1237 return; 1238 } 1239 DPRINTF("\n"); 1240 1241 ucom_queue_command(sc, ucom_cfg_status_change, NULL, 1242 &sc->sc_status_task[0].hdr, 1243 &sc->sc_status_task[1].hdr); 1244 } 1245 1246 static void 1247 ucom_cfg_param(struct usb_proc_msg *_task) 1248 { 1249 struct ucom_param_task *task = 1250 (struct ucom_param_task *)_task; 1251 struct ucom_softc *sc = task->sc; 1252 1253 if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) { 1254 return; 1255 } 1256 if (sc->sc_callback->ucom_cfg_param == NULL) { 1257 return; 1258 } 1259 1260 (sc->sc_callback->ucom_cfg_param) (sc, &task->termios_copy); 1261 1262 /* wait a little */ 1263 usb_pause_mtx(sc->sc_mtx, hz / 10); 1264 } 1265 1266 static int 1267 ucom_param(struct tty *tp, struct termios *t) 1268 { 1269 struct ucom_softc *sc = tty_softc(tp); 1270 uint8_t opened; 1271 int error; 1272 1273 UCOM_MTX_ASSERT(sc, MA_OWNED); 1274 1275 opened = 0; 1276 error = 0; 1277 1278 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 1279 /* XXX the TTY layer should call "open()" first! */ 1280 /* 1281 * Not quite: Its ordering is partly backwards, but 1282 * some parameters must be set early in ttydev_open(), 1283 * possibly before calling ttydevsw_open(). 1284 */ 1285 error = ucom_open(tp); 1286 if (error) 1287 goto done; 1288 1289 opened = 1; 1290 } 1291 DPRINTF("sc = %p\n", sc); 1292 1293 /* Check requested parameters. */ 1294 if (t->c_ispeed && (t->c_ispeed != t->c_ospeed)) { 1295 /* XXX c_ospeed == 0 is perfectly valid. */ 1296 DPRINTF("mismatch ispeed and ospeed\n"); 1297 error = EINVAL; 1298 goto done; 1299 } 1300 t->c_ispeed = t->c_ospeed; 1301 1302 if (sc->sc_callback->ucom_pre_param) { 1303 /* Let the lower layer verify the parameters */ 1304 error = (sc->sc_callback->ucom_pre_param) (sc, t); 1305 if (error) { 1306 DPRINTF("callback error = %d\n", error); 1307 goto done; 1308 } 1309 } 1310 1311 /* Disable transfers */ 1312 sc->sc_flag &= ~UCOM_FLAG_GP_DATA; 1313 1314 /* Queue baud rate programming command first */ 1315 ucom_queue_command(sc, ucom_cfg_param, t, 1316 &sc->sc_param_task[0].hdr, 1317 &sc->sc_param_task[1].hdr); 1318 1319 /* Queue transfer enable command last */ 1320 ucom_queue_command(sc, ucom_cfg_start_transfers, NULL, 1321 &sc->sc_start_task[0].hdr, 1322 &sc->sc_start_task[1].hdr); 1323 1324 if (t->c_cflag & CRTS_IFLOW) { 1325 sc->sc_flag |= UCOM_FLAG_RTS_IFLOW; 1326 } else if (sc->sc_flag & UCOM_FLAG_RTS_IFLOW) { 1327 sc->sc_flag &= ~UCOM_FLAG_RTS_IFLOW; 1328 ucom_modem(tp, SER_RTS, 0); 1329 } 1330 done: 1331 if (error) { 1332 if (opened) { 1333 ucom_close(tp); 1334 } 1335 } 1336 return (error); 1337 } 1338 1339 static void 1340 ucom_outwakeup(struct tty *tp) 1341 { 1342 struct ucom_softc *sc = tty_softc(tp); 1343 1344 UCOM_MTX_ASSERT(sc, MA_OWNED); 1345 1346 DPRINTF("sc = %p\n", sc); 1347 1348 if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) { 1349 /* The higher layer is not ready */ 1350 return; 1351 } 1352 ucom_start_transfers(sc); 1353 } 1354 1355 static bool 1356 ucom_busy(struct tty *tp) 1357 { 1358 struct ucom_softc *sc = tty_softc(tp); 1359 const uint8_t txidle = ULSR_TXRDY | ULSR_TSRE; 1360 1361 UCOM_MTX_ASSERT(sc, MA_OWNED); 1362 1363 DPRINTFN(3, "sc = %p lsr 0x%02x\n", sc, sc->sc_lsr); 1364 1365 /* 1366 * If the driver maintains the txidle bits in LSR, we can use them to 1367 * determine whether the transmitter is busy or idle. Otherwise we have 1368 * to assume it is idle to avoid hanging forever on tcdrain(3). 1369 */ 1370 if (sc->sc_flag & UCOM_FLAG_LSRTXIDLE) 1371 return ((sc->sc_lsr & txidle) != txidle); 1372 else 1373 return (false); 1374 } 1375 1376 /*------------------------------------------------------------------------* 1377 * ucom_get_data 1378 * 1379 * Return values: 1380 * 0: No data is available. 1381 * Else: Data is available. 1382 *------------------------------------------------------------------------*/ 1383 uint8_t 1384 ucom_get_data(struct ucom_softc *sc, struct usb_page_cache *pc, 1385 uint32_t offset, uint32_t len, uint32_t *actlen) 1386 { 1387 struct usb_page_search res; 1388 struct tty *tp = sc->sc_tty; 1389 uint32_t cnt; 1390 uint32_t offset_orig; 1391 1392 UCOM_MTX_ASSERT(sc, MA_OWNED); 1393 1394 if (sc->sc_flag & UCOM_FLAG_CONSOLE) { 1395 unsigned int temp; 1396 1397 /* get total TX length */ 1398 1399 temp = ucom_cons_tx_high - ucom_cons_tx_low; 1400 temp %= UCOM_CONS_BUFSIZE; 1401 1402 /* limit TX length */ 1403 1404 if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_tx_low)) 1405 temp = (UCOM_CONS_BUFSIZE - ucom_cons_tx_low); 1406 1407 if (temp > len) 1408 temp = len; 1409 1410 /* copy in data */ 1411 1412 usbd_copy_in(pc, offset, ucom_cons_tx_buf + ucom_cons_tx_low, temp); 1413 1414 /* update counters */ 1415 1416 ucom_cons_tx_low += temp; 1417 ucom_cons_tx_low %= UCOM_CONS_BUFSIZE; 1418 1419 /* store actual length */ 1420 1421 *actlen = temp; 1422 1423 return (temp ? 1 : 0); 1424 } 1425 1426 if (tty_gone(tp) || 1427 !(sc->sc_flag & UCOM_FLAG_GP_DATA)) { 1428 actlen[0] = 0; 1429 return (0); /* multiport device polling */ 1430 } 1431 offset_orig = offset; 1432 1433 while (len != 0) { 1434 usbd_get_page(pc, offset, &res); 1435 1436 if (res.length > len) { 1437 res.length = len; 1438 } 1439 /* copy data directly into USB buffer */ 1440 cnt = ttydisc_getc(tp, res.buffer, res.length); 1441 1442 offset += cnt; 1443 len -= cnt; 1444 1445 if (cnt < res.length) { 1446 /* end of buffer */ 1447 break; 1448 } 1449 } 1450 1451 actlen[0] = offset - offset_orig; 1452 1453 DPRINTF("cnt=%d\n", actlen[0]); 1454 1455 if (actlen[0] == 0) { 1456 return (0); 1457 } 1458 return (1); 1459 } 1460 1461 void 1462 ucom_put_data(struct ucom_softc *sc, struct usb_page_cache *pc, 1463 uint32_t offset, uint32_t len) 1464 { 1465 struct usb_page_search res; 1466 struct tty *tp = sc->sc_tty; 1467 char *buf; 1468 uint32_t cnt; 1469 1470 UCOM_MTX_ASSERT(sc, MA_OWNED); 1471 1472 if (sc->sc_flag & UCOM_FLAG_CONSOLE) { 1473 unsigned int temp; 1474 1475 /* get maximum RX length */ 1476 1477 temp = (UCOM_CONS_BUFSIZE - 1) - ucom_cons_rx_high + ucom_cons_rx_low; 1478 temp %= UCOM_CONS_BUFSIZE; 1479 1480 /* limit RX length */ 1481 1482 if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_rx_high)) 1483 temp = (UCOM_CONS_BUFSIZE - ucom_cons_rx_high); 1484 1485 if (temp > len) 1486 temp = len; 1487 1488 /* copy out data */ 1489 1490 usbd_copy_out(pc, offset, ucom_cons_rx_buf + ucom_cons_rx_high, temp); 1491 1492 /* update counters */ 1493 1494 ucom_cons_rx_high += temp; 1495 ucom_cons_rx_high %= UCOM_CONS_BUFSIZE; 1496 1497 return; 1498 } 1499 1500 if (tty_gone(tp)) 1501 return; /* multiport device polling */ 1502 1503 if (len == 0) 1504 return; /* no data */ 1505 1506 /* set a flag to prevent recursation ? */ 1507 1508 while (len > 0) { 1509 usbd_get_page(pc, offset, &res); 1510 1511 if (res.length > len) { 1512 res.length = len; 1513 } 1514 len -= res.length; 1515 offset += res.length; 1516 1517 /* pass characters to tty layer */ 1518 1519 buf = res.buffer; 1520 cnt = res.length; 1521 1522 /* first check if we can pass the buffer directly */ 1523 1524 if (ttydisc_can_bypass(tp)) { 1525 /* clear any jitter buffer */ 1526 sc->sc_jitterbuf_in = 0; 1527 sc->sc_jitterbuf_out = 0; 1528 1529 if (ttydisc_rint_bypass(tp, buf, cnt) != cnt) { 1530 DPRINTF("tp=%p, data lost\n", tp); 1531 } 1532 continue; 1533 } 1534 /* need to loop */ 1535 1536 for (cnt = 0; cnt != res.length; cnt++) { 1537 if (sc->sc_jitterbuf_in != sc->sc_jitterbuf_out || 1538 ttydisc_rint(tp, buf[cnt], 0) == -1) { 1539 uint16_t end; 1540 uint16_t pos; 1541 1542 pos = sc->sc_jitterbuf_in; 1543 end = sc->sc_jitterbuf_out + 1544 UCOM_JITTERBUF_SIZE - 1; 1545 if (end >= UCOM_JITTERBUF_SIZE) 1546 end -= UCOM_JITTERBUF_SIZE; 1547 1548 for (; cnt != res.length; cnt++) { 1549 if (pos == end) 1550 break; 1551 sc->sc_jitterbuf[pos] = buf[cnt]; 1552 pos++; 1553 if (pos >= UCOM_JITTERBUF_SIZE) 1554 pos -= UCOM_JITTERBUF_SIZE; 1555 } 1556 1557 sc->sc_jitterbuf_in = pos; 1558 1559 /* set RTS in async fashion */ 1560 if (sc->sc_flag & UCOM_FLAG_RTS_IFLOW) 1561 ucom_rts(sc, 1); 1562 1563 DPRINTF("tp=%p, lost %d " 1564 "chars\n", tp, res.length - cnt); 1565 break; 1566 } 1567 } 1568 } 1569 ttydisc_rint_done(tp); 1570 } 1571 1572 static void 1573 ucom_free(void *xsc) 1574 { 1575 struct ucom_softc *sc = xsc; 1576 1577 if (sc->sc_callback->ucom_free != NULL) 1578 sc->sc_callback->ucom_free(sc); 1579 else 1580 ucom_unref(sc->sc_super); 1581 1582 mtx_lock(&ucom_mtx); 1583 ucom_close_refs--; 1584 mtx_unlock(&ucom_mtx); 1585 } 1586 1587 CONSOLE_DRIVER(ucom); 1588 1589 static void 1590 ucom_cnprobe(struct consdev *cp) 1591 { 1592 if (ucom_cons_unit != -1) 1593 cp->cn_pri = CN_NORMAL; 1594 else 1595 cp->cn_pri = CN_DEAD; 1596 1597 strlcpy(cp->cn_name, "ucom", sizeof(cp->cn_name)); 1598 } 1599 1600 static void 1601 ucom_cninit(struct consdev *cp) 1602 { 1603 } 1604 1605 static void 1606 ucom_cnterm(struct consdev *cp) 1607 { 1608 } 1609 1610 static void 1611 ucom_cngrab(struct consdev *cp) 1612 { 1613 } 1614 1615 static void 1616 ucom_cnungrab(struct consdev *cp) 1617 { 1618 } 1619 1620 static int 1621 ucom_cngetc(struct consdev *cd) 1622 { 1623 struct ucom_softc *sc = ucom_cons_softc; 1624 int c; 1625 1626 if (sc == NULL) 1627 return (-1); 1628 1629 UCOM_MTX_LOCK(sc); 1630 1631 if (ucom_cons_rx_low != ucom_cons_rx_high) { 1632 c = ucom_cons_rx_buf[ucom_cons_rx_low]; 1633 ucom_cons_rx_low ++; 1634 ucom_cons_rx_low %= UCOM_CONS_BUFSIZE; 1635 } else { 1636 c = -1; 1637 } 1638 1639 /* start USB transfers */ 1640 ucom_outwakeup(sc->sc_tty); 1641 1642 UCOM_MTX_UNLOCK(sc); 1643 1644 /* poll if necessary */ 1645 if (USB_IN_POLLING_MODE_FUNC() && sc->sc_callback->ucom_poll) 1646 (sc->sc_callback->ucom_poll) (sc); 1647 1648 return (c); 1649 } 1650 1651 static void 1652 ucom_cnputc(struct consdev *cd, int c) 1653 { 1654 struct ucom_softc *sc = ucom_cons_softc; 1655 unsigned int temp; 1656 1657 if (sc == NULL) 1658 return; 1659 1660 repeat: 1661 1662 UCOM_MTX_LOCK(sc); 1663 1664 /* compute maximum TX length */ 1665 1666 temp = (UCOM_CONS_BUFSIZE - 1) - ucom_cons_tx_high + ucom_cons_tx_low; 1667 temp %= UCOM_CONS_BUFSIZE; 1668 1669 if (temp) { 1670 ucom_cons_tx_buf[ucom_cons_tx_high] = c; 1671 ucom_cons_tx_high ++; 1672 ucom_cons_tx_high %= UCOM_CONS_BUFSIZE; 1673 } 1674 1675 /* start USB transfers */ 1676 ucom_outwakeup(sc->sc_tty); 1677 1678 UCOM_MTX_UNLOCK(sc); 1679 1680 /* poll if necessary */ 1681 if (USB_IN_POLLING_MODE_FUNC() && sc->sc_callback->ucom_poll) { 1682 (sc->sc_callback->ucom_poll) (sc); 1683 /* simple flow control */ 1684 if (temp == 0) 1685 goto repeat; 1686 } 1687 } 1688 1689 /*------------------------------------------------------------------------* 1690 * ucom_ref 1691 * 1692 * This function will increment the super UCOM reference count. 1693 *------------------------------------------------------------------------*/ 1694 void 1695 ucom_ref(struct ucom_super_softc *ssc) 1696 { 1697 mtx_lock(&ucom_mtx); 1698 ssc->sc_refs++; 1699 mtx_unlock(&ucom_mtx); 1700 } 1701 1702 /*------------------------------------------------------------------------* 1703 * ucom_free_unit 1704 * 1705 * This function will free the super UCOM's allocated unit 1706 * number. This function can be called on a zero-initialized 1707 * structure. This function can be called multiple times. 1708 *------------------------------------------------------------------------*/ 1709 static void 1710 ucom_free_unit(struct ucom_super_softc *ssc) 1711 { 1712 if (!(ssc->sc_flag & UCOM_FLAG_FREE_UNIT)) 1713 return; 1714 1715 ucom_unit_free(ssc->sc_unit); 1716 1717 ssc->sc_flag &= ~UCOM_FLAG_FREE_UNIT; 1718 } 1719 1720 /*------------------------------------------------------------------------* 1721 * ucom_unref 1722 * 1723 * This function will decrement the super UCOM reference count. 1724 * 1725 * Return values: 1726 * 0: UCOM structures are still referenced. 1727 * Else: UCOM structures are no longer referenced. 1728 *------------------------------------------------------------------------*/ 1729 int 1730 ucom_unref(struct ucom_super_softc *ssc) 1731 { 1732 int retval; 1733 1734 mtx_lock(&ucom_mtx); 1735 retval = (ssc->sc_refs < 2); 1736 ssc->sc_refs--; 1737 mtx_unlock(&ucom_mtx); 1738 1739 if (retval) 1740 ucom_free_unit(ssc); 1741 1742 return (retval); 1743 } 1744 1745 #if defined(GDB) 1746 1747 #include <gdb/gdb.h> 1748 1749 static gdb_probe_f ucom_gdbprobe; 1750 static gdb_init_f ucom_gdbinit; 1751 static gdb_term_f ucom_gdbterm; 1752 static gdb_getc_f ucom_gdbgetc; 1753 static gdb_putc_f ucom_gdbputc; 1754 1755 GDB_DBGPORT(sio, ucom_gdbprobe, ucom_gdbinit, ucom_gdbterm, ucom_gdbgetc, ucom_gdbputc); 1756 1757 static int 1758 ucom_gdbprobe(void) 1759 { 1760 return ((ucom_cons_softc != NULL) ? 0 : -1); 1761 } 1762 1763 static void 1764 ucom_gdbinit(void) 1765 { 1766 } 1767 1768 static void 1769 ucom_gdbterm(void) 1770 { 1771 } 1772 1773 static void 1774 ucom_gdbputc(int c) 1775 { 1776 ucom_cnputc(NULL, c); 1777 } 1778 1779 static int 1780 ucom_gdbgetc(void) 1781 { 1782 return (ucom_cngetc(NULL)); 1783 } 1784 1785 #endif 1786