1 /* $FreeBSD$ */ 2 /* $OpenBSD: umoscom.c,v 1.2 2006/10/26 06:02:43 jsg Exp $ */ 3 4 /* 5 * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/stdint.h> 21 #include <sys/stddef.h> 22 #include <sys/param.h> 23 #include <sys/queue.h> 24 #include <sys/types.h> 25 #include <sys/systm.h> 26 #include <sys/kernel.h> 27 #include <sys/bus.h> 28 #include <sys/linker_set.h> 29 #include <sys/module.h> 30 #include <sys/lock.h> 31 #include <sys/mutex.h> 32 #include <sys/condvar.h> 33 #include <sys/sysctl.h> 34 #include <sys/sx.h> 35 #include <sys/unistd.h> 36 #include <sys/callout.h> 37 #include <sys/malloc.h> 38 #include <sys/priv.h> 39 40 #include <dev/usb/usb.h> 41 #include <dev/usb/usbdi.h> 42 #include <dev/usb/usbdi_util.h> 43 #include "usbdevs.h" 44 45 #define USB_DEBUG_VAR umoscom_debug 46 #include <dev/usb/usb_debug.h> 47 #include <dev/usb/usb_process.h> 48 49 #include <dev/usb/serial/usb_serial.h> 50 51 #ifdef USB_DEBUG 52 static int umoscom_debug = 0; 53 54 SYSCTL_NODE(_hw_usb, OID_AUTO, umoscom, CTLFLAG_RW, 0, "USB umoscom"); 55 SYSCTL_INT(_hw_usb_umoscom, OID_AUTO, debug, CTLFLAG_RW, 56 &umoscom_debug, 0, "Debug level"); 57 #endif 58 59 #define UMOSCOM_BUFSIZE 1024 /* bytes */ 60 61 #define UMOSCOM_CONFIG_INDEX 0 62 #define UMOSCOM_IFACE_INDEX 0 63 64 /* interrupt packet */ 65 #define UMOSCOM_IIR_RLS 0x06 66 #define UMOSCOM_IIR_RDA 0x04 67 #define UMOSCOM_IIR_CTI 0x0c 68 #define UMOSCOM_IIR_THR 0x02 69 #define UMOSCOM_IIR_MS 0x00 70 71 /* registers */ 72 #define UMOSCOM_READ 0x0d 73 #define UMOSCOM_WRITE 0x0e 74 #define UMOSCOM_UART_REG 0x0300 75 #define UMOSCOM_VEND_REG 0x0000 76 77 #define UMOSCOM_TXBUF 0x00 /* Write */ 78 #define UMOSCOM_RXBUF 0x00 /* Read */ 79 #define UMOSCOM_INT 0x01 80 #define UMOSCOM_FIFO 0x02 /* Write */ 81 #define UMOSCOM_ISR 0x02 /* Read */ 82 #define UMOSCOM_LCR 0x03 83 #define UMOSCOM_MCR 0x04 84 #define UMOSCOM_LSR 0x05 85 #define UMOSCOM_MSR 0x06 86 #define UMOSCOM_SCRATCH 0x07 87 #define UMOSCOM_DIV_LO 0x08 88 #define UMOSCOM_DIV_HI 0x09 89 #define UMOSCOM_EFR 0x0a 90 #define UMOSCOM_XON1 0x0b 91 #define UMOSCOM_XON2 0x0c 92 #define UMOSCOM_XOFF1 0x0d 93 #define UMOSCOM_XOFF2 0x0e 94 95 #define UMOSCOM_BAUDLO 0x00 96 #define UMOSCOM_BAUDHI 0x01 97 98 #define UMOSCOM_INT_RXEN 0x01 99 #define UMOSCOM_INT_TXEN 0x02 100 #define UMOSCOM_INT_RSEN 0x04 101 #define UMOSCOM_INT_MDMEM 0x08 102 #define UMOSCOM_INT_SLEEP 0x10 103 #define UMOSCOM_INT_XOFF 0x20 104 #define UMOSCOM_INT_RTS 0x40 105 106 #define UMOSCOM_FIFO_EN 0x01 107 #define UMOSCOM_FIFO_RXCLR 0x02 108 #define UMOSCOM_FIFO_TXCLR 0x04 109 #define UMOSCOM_FIFO_DMA_BLK 0x08 110 #define UMOSCOM_FIFO_TXLVL_MASK 0x30 111 #define UMOSCOM_FIFO_TXLVL_8 0x00 112 #define UMOSCOM_FIFO_TXLVL_16 0x10 113 #define UMOSCOM_FIFO_TXLVL_32 0x20 114 #define UMOSCOM_FIFO_TXLVL_56 0x30 115 #define UMOSCOM_FIFO_RXLVL_MASK 0xc0 116 #define UMOSCOM_FIFO_RXLVL_8 0x00 117 #define UMOSCOM_FIFO_RXLVL_16 0x40 118 #define UMOSCOM_FIFO_RXLVL_56 0x80 119 #define UMOSCOM_FIFO_RXLVL_80 0xc0 120 121 #define UMOSCOM_ISR_MDM 0x00 122 #define UMOSCOM_ISR_NONE 0x01 123 #define UMOSCOM_ISR_TX 0x02 124 #define UMOSCOM_ISR_RX 0x04 125 #define UMOSCOM_ISR_LINE 0x06 126 #define UMOSCOM_ISR_RXTIMEOUT 0x0c 127 #define UMOSCOM_ISR_RX_XOFF 0x10 128 #define UMOSCOM_ISR_RTSCTS 0x20 129 #define UMOSCOM_ISR_FIFOEN 0xc0 130 131 #define UMOSCOM_LCR_DBITS(x) ((x) - 5) 132 #define UMOSCOM_LCR_STOP_BITS_1 0x00 133 #define UMOSCOM_LCR_STOP_BITS_2 0x04 /* 2 if 6-8 bits/char or 1.5 if 5 */ 134 #define UMOSCOM_LCR_PARITY_NONE 0x00 135 #define UMOSCOM_LCR_PARITY_ODD 0x08 136 #define UMOSCOM_LCR_PARITY_EVEN 0x18 137 #define UMOSCOM_LCR_BREAK 0x40 138 #define UMOSCOM_LCR_DIVLATCH_EN 0x80 139 140 #define UMOSCOM_MCR_DTR 0x01 141 #define UMOSCOM_MCR_RTS 0x02 142 #define UMOSCOM_MCR_LOOP 0x04 143 #define UMOSCOM_MCR_INTEN 0x08 144 #define UMOSCOM_MCR_LOOPBACK 0x10 145 #define UMOSCOM_MCR_XONANY 0x20 146 #define UMOSCOM_MCR_IRDA_EN 0x40 147 #define UMOSCOM_MCR_BAUD_DIV4 0x80 148 149 #define UMOSCOM_LSR_RXDATA 0x01 150 #define UMOSCOM_LSR_RXOVER 0x02 151 #define UMOSCOM_LSR_RXPAR_ERR 0x04 152 #define UMOSCOM_LSR_RXFRM_ERR 0x08 153 #define UMOSCOM_LSR_RXBREAK 0x10 154 #define UMOSCOM_LSR_TXEMPTY 0x20 155 #define UMOSCOM_LSR_TXALLEMPTY 0x40 156 #define UMOSCOM_LSR_TXFIFO_ERR 0x80 157 158 #define UMOSCOM_MSR_CTS_CHG 0x01 159 #define UMOSCOM_MSR_DSR_CHG 0x02 160 #define UMOSCOM_MSR_RI_CHG 0x04 161 #define UMOSCOM_MSR_CD_CHG 0x08 162 #define UMOSCOM_MSR_CTS 0x10 163 #define UMOSCOM_MSR_RTS 0x20 164 #define UMOSCOM_MSR_RI 0x40 165 #define UMOSCOM_MSR_CD 0x80 166 167 #define UMOSCOM_BAUD_REF 115200 168 169 enum { 170 UMOSCOM_BULK_DT_WR, 171 UMOSCOM_BULK_DT_RD, 172 UMOSCOM_INTR_DT_RD, 173 UMOSCOM_N_TRANSFER, 174 }; 175 176 struct umoscom_softc { 177 struct ucom_super_softc sc_super_ucom; 178 struct ucom_softc sc_ucom; 179 180 struct usb_xfer *sc_xfer[UMOSCOM_N_TRANSFER]; 181 struct usb_device *sc_udev; 182 struct mtx sc_mtx; 183 184 uint8_t sc_mcr; 185 uint8_t sc_lcr; 186 }; 187 188 /* prototypes */ 189 190 static device_probe_t umoscom_probe; 191 static device_attach_t umoscom_attach; 192 static device_detach_t umoscom_detach; 193 194 static usb_callback_t umoscom_write_callback; 195 static usb_callback_t umoscom_read_callback; 196 static usb_callback_t umoscom_intr_callback; 197 198 static void umoscom_cfg_open(struct ucom_softc *); 199 static void umoscom_cfg_close(struct ucom_softc *); 200 static void umoscom_cfg_set_break(struct ucom_softc *, uint8_t); 201 static void umoscom_cfg_set_dtr(struct ucom_softc *, uint8_t); 202 static void umoscom_cfg_set_rts(struct ucom_softc *, uint8_t); 203 static int umoscom_pre_param(struct ucom_softc *, struct termios *); 204 static void umoscom_cfg_param(struct ucom_softc *, struct termios *); 205 static void umoscom_cfg_get_status(struct ucom_softc *, uint8_t *, 206 uint8_t *); 207 static void umoscom_cfg_write(struct umoscom_softc *, uint16_t, uint16_t); 208 static uint8_t umoscom_cfg_read(struct umoscom_softc *, uint16_t); 209 static void umoscom_start_read(struct ucom_softc *); 210 static void umoscom_stop_read(struct ucom_softc *); 211 static void umoscom_start_write(struct ucom_softc *); 212 static void umoscom_stop_write(struct ucom_softc *); 213 static void umoscom_poll(struct ucom_softc *ucom); 214 215 static const struct usb_config umoscom_config_data[UMOSCOM_N_TRANSFER] = { 216 217 [UMOSCOM_BULK_DT_WR] = { 218 .type = UE_BULK, 219 .endpoint = UE_ADDR_ANY, 220 .direction = UE_DIR_OUT, 221 .bufsize = UMOSCOM_BUFSIZE, 222 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 223 .callback = &umoscom_write_callback, 224 }, 225 226 [UMOSCOM_BULK_DT_RD] = { 227 .type = UE_BULK, 228 .endpoint = UE_ADDR_ANY, 229 .direction = UE_DIR_IN, 230 .bufsize = UMOSCOM_BUFSIZE, 231 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 232 .callback = &umoscom_read_callback, 233 }, 234 235 [UMOSCOM_INTR_DT_RD] = { 236 .type = UE_INTERRUPT, 237 .endpoint = UE_ADDR_ANY, 238 .direction = UE_DIR_IN, 239 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 240 .bufsize = 0, /* use wMaxPacketSize */ 241 .callback = &umoscom_intr_callback, 242 }, 243 }; 244 245 static const struct ucom_callback umoscom_callback = { 246 /* configuration callbacks */ 247 .ucom_cfg_get_status = &umoscom_cfg_get_status, 248 .ucom_cfg_set_dtr = &umoscom_cfg_set_dtr, 249 .ucom_cfg_set_rts = &umoscom_cfg_set_rts, 250 .ucom_cfg_set_break = &umoscom_cfg_set_break, 251 .ucom_cfg_param = &umoscom_cfg_param, 252 .ucom_cfg_open = &umoscom_cfg_open, 253 .ucom_cfg_close = &umoscom_cfg_close, 254 255 /* other callbacks */ 256 .ucom_pre_param = &umoscom_pre_param, 257 .ucom_start_read = &umoscom_start_read, 258 .ucom_stop_read = &umoscom_stop_read, 259 .ucom_start_write = &umoscom_start_write, 260 .ucom_stop_write = &umoscom_stop_write, 261 .ucom_poll = &umoscom_poll, 262 }; 263 264 static device_method_t umoscom_methods[] = { 265 DEVMETHOD(device_probe, umoscom_probe), 266 DEVMETHOD(device_attach, umoscom_attach), 267 DEVMETHOD(device_detach, umoscom_detach), 268 {0, 0} 269 }; 270 271 static devclass_t umoscom_devclass; 272 273 static driver_t umoscom_driver = { 274 .name = "umoscom", 275 .methods = umoscom_methods, 276 .size = sizeof(struct umoscom_softc), 277 }; 278 279 DRIVER_MODULE(umoscom, uhub, umoscom_driver, umoscom_devclass, NULL, 0); 280 MODULE_DEPEND(umoscom, ucom, 1, 1, 1); 281 MODULE_DEPEND(umoscom, usb, 1, 1, 1); 282 283 static const struct usb_device_id umoscom_devs[] = { 284 {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7703, 0)} 285 }; 286 287 static int 288 umoscom_probe(device_t dev) 289 { 290 struct usb_attach_arg *uaa = device_get_ivars(dev); 291 292 if (uaa->usb_mode != USB_MODE_HOST) { 293 return (ENXIO); 294 } 295 if (uaa->info.bConfigIndex != UMOSCOM_CONFIG_INDEX) { 296 return (ENXIO); 297 } 298 if (uaa->info.bIfaceIndex != UMOSCOM_IFACE_INDEX) { 299 return (ENXIO); 300 } 301 return (usbd_lookup_id_by_uaa(umoscom_devs, sizeof(umoscom_devs), uaa)); 302 } 303 304 static int 305 umoscom_attach(device_t dev) 306 { 307 struct usb_attach_arg *uaa = device_get_ivars(dev); 308 struct umoscom_softc *sc = device_get_softc(dev); 309 int error; 310 uint8_t iface_index; 311 312 sc->sc_udev = uaa->device; 313 sc->sc_mcr = 0x08; /* enable interrupts */ 314 315 /* XXX the device doesn't provide any ID string, so set a static one */ 316 device_set_desc(dev, "MOSCHIP USB Serial Port Adapter"); 317 device_printf(dev, "<MOSCHIP USB Serial Port Adapter>\n"); 318 319 mtx_init(&sc->sc_mtx, "umoscom", NULL, MTX_DEF); 320 321 iface_index = UMOSCOM_IFACE_INDEX; 322 error = usbd_transfer_setup(uaa->device, &iface_index, 323 sc->sc_xfer, umoscom_config_data, 324 UMOSCOM_N_TRANSFER, sc, &sc->sc_mtx); 325 326 if (error) { 327 goto detach; 328 } 329 /* clear stall at first run */ 330 mtx_lock(&sc->sc_mtx); 331 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 332 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 333 mtx_unlock(&sc->sc_mtx); 334 335 error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc, 336 &umoscom_callback, &sc->sc_mtx); 337 if (error) { 338 goto detach; 339 } 340 return (0); 341 342 detach: 343 device_printf(dev, "attach error: %s\n", usbd_errstr(error)); 344 umoscom_detach(dev); 345 return (ENXIO); 346 } 347 348 static int 349 umoscom_detach(device_t dev) 350 { 351 struct umoscom_softc *sc = device_get_softc(dev); 352 353 ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom, 1); 354 usbd_transfer_unsetup(sc->sc_xfer, UMOSCOM_N_TRANSFER); 355 mtx_destroy(&sc->sc_mtx); 356 357 return (0); 358 } 359 360 static void 361 umoscom_cfg_open(struct ucom_softc *ucom) 362 { 363 struct umoscom_softc *sc = ucom->sc_parent; 364 365 DPRINTF("\n"); 366 367 /* Purge FIFOs or odd things happen */ 368 umoscom_cfg_write(sc, UMOSCOM_FIFO, 0x00 | UMOSCOM_UART_REG); 369 370 /* Enable FIFO */ 371 umoscom_cfg_write(sc, UMOSCOM_FIFO, UMOSCOM_FIFO_EN | 372 UMOSCOM_FIFO_RXCLR | UMOSCOM_FIFO_TXCLR | 373 UMOSCOM_FIFO_DMA_BLK | UMOSCOM_FIFO_RXLVL_MASK | 374 UMOSCOM_UART_REG); 375 376 /* Enable Interrupt Registers */ 377 umoscom_cfg_write(sc, UMOSCOM_INT, 0x0C | UMOSCOM_UART_REG); 378 379 /* Magic */ 380 umoscom_cfg_write(sc, 0x01, 0x08); 381 382 /* Magic */ 383 umoscom_cfg_write(sc, 0x00, 0x02); 384 } 385 386 static void 387 umoscom_cfg_close(struct ucom_softc *ucom) 388 { 389 return; 390 } 391 392 static void 393 umoscom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff) 394 { 395 struct umoscom_softc *sc = ucom->sc_parent; 396 uint16_t val; 397 398 val = sc->sc_lcr; 399 if (onoff) 400 val |= UMOSCOM_LCR_BREAK; 401 402 umoscom_cfg_write(sc, UMOSCOM_LCR, val | UMOSCOM_UART_REG); 403 } 404 405 static void 406 umoscom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff) 407 { 408 struct umoscom_softc *sc = ucom->sc_parent; 409 410 if (onoff) 411 sc->sc_mcr |= UMOSCOM_MCR_DTR; 412 else 413 sc->sc_mcr &= ~UMOSCOM_MCR_DTR; 414 415 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 416 } 417 418 static void 419 umoscom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff) 420 { 421 struct umoscom_softc *sc = ucom->sc_parent; 422 423 if (onoff) 424 sc->sc_mcr |= UMOSCOM_MCR_RTS; 425 else 426 sc->sc_mcr &= ~UMOSCOM_MCR_RTS; 427 428 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 429 } 430 431 static int 432 umoscom_pre_param(struct ucom_softc *ucom, struct termios *t) 433 { 434 if ((t->c_ospeed <= 1) || (t->c_ospeed > 115200)) 435 return (EINVAL); 436 437 return (0); 438 } 439 440 static void 441 umoscom_cfg_param(struct ucom_softc *ucom, struct termios *t) 442 { 443 struct umoscom_softc *sc = ucom->sc_parent; 444 uint16_t data; 445 446 DPRINTF("speed=%d\n", t->c_ospeed); 447 448 data = ((uint32_t)UMOSCOM_BAUD_REF) / ((uint32_t)t->c_ospeed); 449 450 if (data == 0) { 451 DPRINTF("invalid baud rate!\n"); 452 return; 453 } 454 umoscom_cfg_write(sc, UMOSCOM_LCR, 455 UMOSCOM_LCR_DIVLATCH_EN | UMOSCOM_UART_REG); 456 457 umoscom_cfg_write(sc, UMOSCOM_BAUDLO, 458 (data & 0xFF) | UMOSCOM_UART_REG); 459 460 umoscom_cfg_write(sc, UMOSCOM_BAUDHI, 461 ((data >> 8) & 0xFF) | UMOSCOM_UART_REG); 462 463 if (t->c_cflag & CSTOPB) 464 data = UMOSCOM_LCR_STOP_BITS_2; 465 else 466 data = UMOSCOM_LCR_STOP_BITS_1; 467 468 if (t->c_cflag & PARENB) { 469 if (t->c_cflag & PARODD) 470 data |= UMOSCOM_LCR_PARITY_ODD; 471 else 472 data |= UMOSCOM_LCR_PARITY_EVEN; 473 } else 474 data |= UMOSCOM_LCR_PARITY_NONE; 475 476 switch (t->c_cflag & CSIZE) { 477 case CS5: 478 data |= UMOSCOM_LCR_DBITS(5); 479 break; 480 case CS6: 481 data |= UMOSCOM_LCR_DBITS(6); 482 break; 483 case CS7: 484 data |= UMOSCOM_LCR_DBITS(7); 485 break; 486 case CS8: 487 data |= UMOSCOM_LCR_DBITS(8); 488 break; 489 } 490 491 sc->sc_lcr = data; 492 umoscom_cfg_write(sc, UMOSCOM_LCR, data | UMOSCOM_UART_REG); 493 } 494 495 static void 496 umoscom_cfg_get_status(struct ucom_softc *ucom, uint8_t *p_lsr, uint8_t *p_msr) 497 { 498 struct umoscom_softc *sc = ucom->sc_parent; 499 uint8_t lsr; 500 uint8_t msr; 501 502 DPRINTFN(5, "\n"); 503 504 /* read status registers */ 505 506 lsr = umoscom_cfg_read(sc, UMOSCOM_LSR); 507 msr = umoscom_cfg_read(sc, UMOSCOM_MSR); 508 509 /* translate bits */ 510 511 if (msr & UMOSCOM_MSR_CTS) 512 *p_msr |= SER_CTS; 513 514 if (msr & UMOSCOM_MSR_CD) 515 *p_msr |= SER_DCD; 516 517 if (msr & UMOSCOM_MSR_RI) 518 *p_msr |= SER_RI; 519 520 if (msr & UMOSCOM_MSR_RTS) 521 *p_msr |= SER_DSR; 522 } 523 524 static void 525 umoscom_cfg_write(struct umoscom_softc *sc, uint16_t reg, uint16_t val) 526 { 527 struct usb_device_request req; 528 529 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 530 req.bRequest = UMOSCOM_WRITE; 531 USETW(req.wValue, val); 532 USETW(req.wIndex, reg); 533 USETW(req.wLength, 0); 534 535 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 536 &req, NULL, 0, 1000); 537 } 538 539 static uint8_t 540 umoscom_cfg_read(struct umoscom_softc *sc, uint16_t reg) 541 { 542 struct usb_device_request req; 543 uint8_t val; 544 545 req.bmRequestType = UT_READ_VENDOR_DEVICE; 546 req.bRequest = UMOSCOM_READ; 547 USETW(req.wValue, 0); 548 USETW(req.wIndex, reg); 549 USETW(req.wLength, 1); 550 551 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 552 &req, &val, 0, 1000); 553 554 DPRINTF("reg=0x%04x, val=0x%02x\n", reg, val); 555 556 return (val); 557 } 558 559 static void 560 umoscom_start_read(struct ucom_softc *ucom) 561 { 562 struct umoscom_softc *sc = ucom->sc_parent; 563 564 #if 0 565 /* start interrupt endpoint */ 566 usbd_transfer_start(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 567 #endif 568 /* start read endpoint */ 569 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 570 } 571 572 static void 573 umoscom_stop_read(struct ucom_softc *ucom) 574 { 575 struct umoscom_softc *sc = ucom->sc_parent; 576 577 /* stop interrupt transfer */ 578 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 579 580 /* stop read endpoint */ 581 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 582 } 583 584 static void 585 umoscom_start_write(struct ucom_softc *ucom) 586 { 587 struct umoscom_softc *sc = ucom->sc_parent; 588 589 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 590 } 591 592 static void 593 umoscom_stop_write(struct ucom_softc *ucom) 594 { 595 struct umoscom_softc *sc = ucom->sc_parent; 596 597 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 598 } 599 600 static void 601 umoscom_write_callback(struct usb_xfer *xfer, usb_error_t error) 602 { 603 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 604 struct usb_page_cache *pc; 605 uint32_t actlen; 606 607 switch (USB_GET_STATE(xfer)) { 608 case USB_ST_SETUP: 609 case USB_ST_TRANSFERRED: 610 tr_setup: 611 DPRINTF("\n"); 612 613 pc = usbd_xfer_get_frame(xfer, 0); 614 if (ucom_get_data(&sc->sc_ucom, pc, 0, 615 UMOSCOM_BUFSIZE, &actlen)) { 616 617 usbd_xfer_set_frame_len(xfer, 0, actlen); 618 usbd_transfer_submit(xfer); 619 } 620 return; 621 622 default: /* Error */ 623 if (error != USB_ERR_CANCELLED) { 624 DPRINTFN(0, "transfer failed\n"); 625 /* try to clear stall first */ 626 usbd_xfer_set_stall(xfer); 627 goto tr_setup; 628 } 629 return; 630 } 631 } 632 633 static void 634 umoscom_read_callback(struct usb_xfer *xfer, usb_error_t error) 635 { 636 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 637 struct usb_page_cache *pc; 638 int actlen; 639 640 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 641 642 switch (USB_GET_STATE(xfer)) { 643 case USB_ST_TRANSFERRED: 644 DPRINTF("got %d bytes\n", actlen); 645 pc = usbd_xfer_get_frame(xfer, 0); 646 ucom_put_data(&sc->sc_ucom, pc, 0, actlen); 647 648 case USB_ST_SETUP: 649 tr_setup: 650 DPRINTF("\n"); 651 652 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 653 usbd_transfer_submit(xfer); 654 return; 655 656 default: /* Error */ 657 if (error != USB_ERR_CANCELLED) { 658 DPRINTFN(0, "transfer failed\n"); 659 /* try to clear stall first */ 660 usbd_xfer_set_stall(xfer); 661 goto tr_setup; 662 } 663 return; 664 } 665 } 666 667 static void 668 umoscom_intr_callback(struct usb_xfer *xfer, usb_error_t error) 669 { 670 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 671 int actlen; 672 673 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 674 675 switch (USB_GET_STATE(xfer)) { 676 case USB_ST_TRANSFERRED: 677 if (actlen < 2) { 678 DPRINTF("too short message\n"); 679 goto tr_setup; 680 } 681 ucom_status_change(&sc->sc_ucom); 682 683 case USB_ST_SETUP: 684 tr_setup: 685 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 686 usbd_transfer_submit(xfer); 687 return; 688 689 default: /* Error */ 690 if (error != USB_ERR_CANCELLED) { 691 DPRINTFN(0, "transfer failed\n"); 692 /* try to clear stall first */ 693 usbd_xfer_set_stall(xfer); 694 goto tr_setup; 695 } 696 return; 697 } 698 } 699 700 static void 701 umoscom_poll(struct ucom_softc *ucom) 702 { 703 struct umoscom_softc *sc = ucom->sc_parent; 704 usbd_transfer_poll(sc->sc_xfer, UMOSCOM_N_TRANSFER); 705 } 706