1 /* $FreeBSD$ */ 2 /* $OpenBSD: umoscom.c,v 1.2 2006/10/26 06:02:43 jsg Exp $ */ 3 4 /* 5 * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/stdint.h> 21 #include <sys/stddef.h> 22 #include <sys/param.h> 23 #include <sys/queue.h> 24 #include <sys/types.h> 25 #include <sys/systm.h> 26 #include <sys/kernel.h> 27 #include <sys/bus.h> 28 #include <sys/module.h> 29 #include <sys/lock.h> 30 #include <sys/mutex.h> 31 #include <sys/condvar.h> 32 #include <sys/sysctl.h> 33 #include <sys/sx.h> 34 #include <sys/unistd.h> 35 #include <sys/callout.h> 36 #include <sys/malloc.h> 37 #include <sys/priv.h> 38 39 #include <dev/usb/usb.h> 40 #include <dev/usb/usbdi.h> 41 #include <dev/usb/usbdi_util.h> 42 #include "usbdevs.h" 43 44 #define USB_DEBUG_VAR umoscom_debug 45 #include <dev/usb/usb_debug.h> 46 #include <dev/usb/usb_process.h> 47 48 #include <dev/usb/serial/usb_serial.h> 49 50 #ifdef USB_DEBUG 51 static int umoscom_debug = 0; 52 53 static SYSCTL_NODE(_hw_usb, OID_AUTO, umoscom, CTLFLAG_RW, 0, "USB umoscom"); 54 SYSCTL_INT(_hw_usb_umoscom, OID_AUTO, debug, CTLFLAG_RW, 55 &umoscom_debug, 0, "Debug level"); 56 #endif 57 58 #define UMOSCOM_BUFSIZE 1024 /* bytes */ 59 60 #define UMOSCOM_CONFIG_INDEX 0 61 #define UMOSCOM_IFACE_INDEX 0 62 63 /* interrupt packet */ 64 #define UMOSCOM_IIR_RLS 0x06 65 #define UMOSCOM_IIR_RDA 0x04 66 #define UMOSCOM_IIR_CTI 0x0c 67 #define UMOSCOM_IIR_THR 0x02 68 #define UMOSCOM_IIR_MS 0x00 69 70 /* registers */ 71 #define UMOSCOM_READ 0x0d 72 #define UMOSCOM_WRITE 0x0e 73 #define UMOSCOM_UART_REG 0x0300 74 #define UMOSCOM_VEND_REG 0x0000 75 76 #define UMOSCOM_TXBUF 0x00 /* Write */ 77 #define UMOSCOM_RXBUF 0x00 /* Read */ 78 #define UMOSCOM_INT 0x01 79 #define UMOSCOM_FIFO 0x02 /* Write */ 80 #define UMOSCOM_ISR 0x02 /* Read */ 81 #define UMOSCOM_LCR 0x03 82 #define UMOSCOM_MCR 0x04 83 #define UMOSCOM_LSR 0x05 84 #define UMOSCOM_MSR 0x06 85 #define UMOSCOM_SCRATCH 0x07 86 #define UMOSCOM_DIV_LO 0x08 87 #define UMOSCOM_DIV_HI 0x09 88 #define UMOSCOM_EFR 0x0a 89 #define UMOSCOM_XON1 0x0b 90 #define UMOSCOM_XON2 0x0c 91 #define UMOSCOM_XOFF1 0x0d 92 #define UMOSCOM_XOFF2 0x0e 93 94 #define UMOSCOM_BAUDLO 0x00 95 #define UMOSCOM_BAUDHI 0x01 96 97 #define UMOSCOM_INT_RXEN 0x01 98 #define UMOSCOM_INT_TXEN 0x02 99 #define UMOSCOM_INT_RSEN 0x04 100 #define UMOSCOM_INT_MDMEM 0x08 101 #define UMOSCOM_INT_SLEEP 0x10 102 #define UMOSCOM_INT_XOFF 0x20 103 #define UMOSCOM_INT_RTS 0x40 104 105 #define UMOSCOM_FIFO_EN 0x01 106 #define UMOSCOM_FIFO_RXCLR 0x02 107 #define UMOSCOM_FIFO_TXCLR 0x04 108 #define UMOSCOM_FIFO_DMA_BLK 0x08 109 #define UMOSCOM_FIFO_TXLVL_MASK 0x30 110 #define UMOSCOM_FIFO_TXLVL_8 0x00 111 #define UMOSCOM_FIFO_TXLVL_16 0x10 112 #define UMOSCOM_FIFO_TXLVL_32 0x20 113 #define UMOSCOM_FIFO_TXLVL_56 0x30 114 #define UMOSCOM_FIFO_RXLVL_MASK 0xc0 115 #define UMOSCOM_FIFO_RXLVL_8 0x00 116 #define UMOSCOM_FIFO_RXLVL_16 0x40 117 #define UMOSCOM_FIFO_RXLVL_56 0x80 118 #define UMOSCOM_FIFO_RXLVL_80 0xc0 119 120 #define UMOSCOM_ISR_MDM 0x00 121 #define UMOSCOM_ISR_NONE 0x01 122 #define UMOSCOM_ISR_TX 0x02 123 #define UMOSCOM_ISR_RX 0x04 124 #define UMOSCOM_ISR_LINE 0x06 125 #define UMOSCOM_ISR_RXTIMEOUT 0x0c 126 #define UMOSCOM_ISR_RX_XOFF 0x10 127 #define UMOSCOM_ISR_RTSCTS 0x20 128 #define UMOSCOM_ISR_FIFOEN 0xc0 129 130 #define UMOSCOM_LCR_DBITS(x) ((x) - 5) 131 #define UMOSCOM_LCR_STOP_BITS_1 0x00 132 #define UMOSCOM_LCR_STOP_BITS_2 0x04 /* 2 if 6-8 bits/char or 1.5 if 5 */ 133 #define UMOSCOM_LCR_PARITY_NONE 0x00 134 #define UMOSCOM_LCR_PARITY_ODD 0x08 135 #define UMOSCOM_LCR_PARITY_EVEN 0x18 136 #define UMOSCOM_LCR_BREAK 0x40 137 #define UMOSCOM_LCR_DIVLATCH_EN 0x80 138 139 #define UMOSCOM_MCR_DTR 0x01 140 #define UMOSCOM_MCR_RTS 0x02 141 #define UMOSCOM_MCR_LOOP 0x04 142 #define UMOSCOM_MCR_INTEN 0x08 143 #define UMOSCOM_MCR_LOOPBACK 0x10 144 #define UMOSCOM_MCR_XONANY 0x20 145 #define UMOSCOM_MCR_IRDA_EN 0x40 146 #define UMOSCOM_MCR_BAUD_DIV4 0x80 147 148 #define UMOSCOM_LSR_RXDATA 0x01 149 #define UMOSCOM_LSR_RXOVER 0x02 150 #define UMOSCOM_LSR_RXPAR_ERR 0x04 151 #define UMOSCOM_LSR_RXFRM_ERR 0x08 152 #define UMOSCOM_LSR_RXBREAK 0x10 153 #define UMOSCOM_LSR_TXEMPTY 0x20 154 #define UMOSCOM_LSR_TXALLEMPTY 0x40 155 #define UMOSCOM_LSR_TXFIFO_ERR 0x80 156 157 #define UMOSCOM_MSR_CTS_CHG 0x01 158 #define UMOSCOM_MSR_DSR_CHG 0x02 159 #define UMOSCOM_MSR_RI_CHG 0x04 160 #define UMOSCOM_MSR_CD_CHG 0x08 161 #define UMOSCOM_MSR_CTS 0x10 162 #define UMOSCOM_MSR_RTS 0x20 163 #define UMOSCOM_MSR_RI 0x40 164 #define UMOSCOM_MSR_CD 0x80 165 166 #define UMOSCOM_BAUD_REF 115200 167 168 enum { 169 UMOSCOM_BULK_DT_WR, 170 UMOSCOM_BULK_DT_RD, 171 UMOSCOM_INTR_DT_RD, 172 UMOSCOM_N_TRANSFER, 173 }; 174 175 struct umoscom_softc { 176 struct ucom_super_softc sc_super_ucom; 177 struct ucom_softc sc_ucom; 178 179 struct usb_xfer *sc_xfer[UMOSCOM_N_TRANSFER]; 180 struct usb_device *sc_udev; 181 struct mtx sc_mtx; 182 183 uint8_t sc_mcr; 184 uint8_t sc_lcr; 185 }; 186 187 /* prototypes */ 188 189 static device_probe_t umoscom_probe; 190 static device_attach_t umoscom_attach; 191 static device_detach_t umoscom_detach; 192 193 static usb_callback_t umoscom_write_callback; 194 static usb_callback_t umoscom_read_callback; 195 static usb_callback_t umoscom_intr_callback; 196 197 static void umoscom_cfg_open(struct ucom_softc *); 198 static void umoscom_cfg_close(struct ucom_softc *); 199 static void umoscom_cfg_set_break(struct ucom_softc *, uint8_t); 200 static void umoscom_cfg_set_dtr(struct ucom_softc *, uint8_t); 201 static void umoscom_cfg_set_rts(struct ucom_softc *, uint8_t); 202 static int umoscom_pre_param(struct ucom_softc *, struct termios *); 203 static void umoscom_cfg_param(struct ucom_softc *, struct termios *); 204 static void umoscom_cfg_get_status(struct ucom_softc *, uint8_t *, 205 uint8_t *); 206 static void umoscom_cfg_write(struct umoscom_softc *, uint16_t, uint16_t); 207 static uint8_t umoscom_cfg_read(struct umoscom_softc *, uint16_t); 208 static void umoscom_start_read(struct ucom_softc *); 209 static void umoscom_stop_read(struct ucom_softc *); 210 static void umoscom_start_write(struct ucom_softc *); 211 static void umoscom_stop_write(struct ucom_softc *); 212 static void umoscom_poll(struct ucom_softc *ucom); 213 214 static const struct usb_config umoscom_config_data[UMOSCOM_N_TRANSFER] = { 215 216 [UMOSCOM_BULK_DT_WR] = { 217 .type = UE_BULK, 218 .endpoint = UE_ADDR_ANY, 219 .direction = UE_DIR_OUT, 220 .bufsize = UMOSCOM_BUFSIZE, 221 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 222 .callback = &umoscom_write_callback, 223 }, 224 225 [UMOSCOM_BULK_DT_RD] = { 226 .type = UE_BULK, 227 .endpoint = UE_ADDR_ANY, 228 .direction = UE_DIR_IN, 229 .bufsize = UMOSCOM_BUFSIZE, 230 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 231 .callback = &umoscom_read_callback, 232 }, 233 234 [UMOSCOM_INTR_DT_RD] = { 235 .type = UE_INTERRUPT, 236 .endpoint = UE_ADDR_ANY, 237 .direction = UE_DIR_IN, 238 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 239 .bufsize = 0, /* use wMaxPacketSize */ 240 .callback = &umoscom_intr_callback, 241 }, 242 }; 243 244 static const struct ucom_callback umoscom_callback = { 245 /* configuration callbacks */ 246 .ucom_cfg_get_status = &umoscom_cfg_get_status, 247 .ucom_cfg_set_dtr = &umoscom_cfg_set_dtr, 248 .ucom_cfg_set_rts = &umoscom_cfg_set_rts, 249 .ucom_cfg_set_break = &umoscom_cfg_set_break, 250 .ucom_cfg_param = &umoscom_cfg_param, 251 .ucom_cfg_open = &umoscom_cfg_open, 252 .ucom_cfg_close = &umoscom_cfg_close, 253 254 /* other callbacks */ 255 .ucom_pre_param = &umoscom_pre_param, 256 .ucom_start_read = &umoscom_start_read, 257 .ucom_stop_read = &umoscom_stop_read, 258 .ucom_start_write = &umoscom_start_write, 259 .ucom_stop_write = &umoscom_stop_write, 260 .ucom_poll = &umoscom_poll, 261 }; 262 263 static device_method_t umoscom_methods[] = { 264 DEVMETHOD(device_probe, umoscom_probe), 265 DEVMETHOD(device_attach, umoscom_attach), 266 DEVMETHOD(device_detach, umoscom_detach), 267 {0, 0} 268 }; 269 270 static devclass_t umoscom_devclass; 271 272 static driver_t umoscom_driver = { 273 .name = "umoscom", 274 .methods = umoscom_methods, 275 .size = sizeof(struct umoscom_softc), 276 }; 277 278 DRIVER_MODULE(umoscom, uhub, umoscom_driver, umoscom_devclass, NULL, 0); 279 MODULE_DEPEND(umoscom, ucom, 1, 1, 1); 280 MODULE_DEPEND(umoscom, usb, 1, 1, 1); 281 MODULE_VERSION(umoscom, 1); 282 283 static const STRUCT_USB_HOST_ID umoscom_devs[] = { 284 {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7703, 0)} 285 }; 286 287 static int 288 umoscom_probe(device_t dev) 289 { 290 struct usb_attach_arg *uaa = device_get_ivars(dev); 291 292 if (uaa->usb_mode != USB_MODE_HOST) { 293 return (ENXIO); 294 } 295 if (uaa->info.bConfigIndex != UMOSCOM_CONFIG_INDEX) { 296 return (ENXIO); 297 } 298 if (uaa->info.bIfaceIndex != UMOSCOM_IFACE_INDEX) { 299 return (ENXIO); 300 } 301 return (usbd_lookup_id_by_uaa(umoscom_devs, sizeof(umoscom_devs), uaa)); 302 } 303 304 static int 305 umoscom_attach(device_t dev) 306 { 307 struct usb_attach_arg *uaa = device_get_ivars(dev); 308 struct umoscom_softc *sc = device_get_softc(dev); 309 int error; 310 uint8_t iface_index; 311 312 sc->sc_udev = uaa->device; 313 sc->sc_mcr = 0x08; /* enable interrupts */ 314 315 /* XXX the device doesn't provide any ID string, so set a static one */ 316 device_set_desc(dev, "MOSCHIP USB Serial Port Adapter"); 317 device_printf(dev, "<MOSCHIP USB Serial Port Adapter>\n"); 318 319 mtx_init(&sc->sc_mtx, "umoscom", NULL, MTX_DEF); 320 321 iface_index = UMOSCOM_IFACE_INDEX; 322 error = usbd_transfer_setup(uaa->device, &iface_index, 323 sc->sc_xfer, umoscom_config_data, 324 UMOSCOM_N_TRANSFER, sc, &sc->sc_mtx); 325 326 if (error) { 327 goto detach; 328 } 329 /* clear stall at first run */ 330 mtx_lock(&sc->sc_mtx); 331 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 332 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 333 mtx_unlock(&sc->sc_mtx); 334 335 error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc, 336 &umoscom_callback, &sc->sc_mtx); 337 if (error) { 338 goto detach; 339 } 340 ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev); 341 342 return (0); 343 344 detach: 345 device_printf(dev, "attach error: %s\n", usbd_errstr(error)); 346 umoscom_detach(dev); 347 return (ENXIO); 348 } 349 350 static int 351 umoscom_detach(device_t dev) 352 { 353 struct umoscom_softc *sc = device_get_softc(dev); 354 355 ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom); 356 usbd_transfer_unsetup(sc->sc_xfer, UMOSCOM_N_TRANSFER); 357 mtx_destroy(&sc->sc_mtx); 358 359 return (0); 360 } 361 362 static void 363 umoscom_cfg_open(struct ucom_softc *ucom) 364 { 365 struct umoscom_softc *sc = ucom->sc_parent; 366 367 DPRINTF("\n"); 368 369 /* Purge FIFOs or odd things happen */ 370 umoscom_cfg_write(sc, UMOSCOM_FIFO, 0x00 | UMOSCOM_UART_REG); 371 372 /* Enable FIFO */ 373 umoscom_cfg_write(sc, UMOSCOM_FIFO, UMOSCOM_FIFO_EN | 374 UMOSCOM_FIFO_RXCLR | UMOSCOM_FIFO_TXCLR | 375 UMOSCOM_FIFO_DMA_BLK | UMOSCOM_FIFO_RXLVL_MASK | 376 UMOSCOM_UART_REG); 377 378 /* Enable Interrupt Registers */ 379 umoscom_cfg_write(sc, UMOSCOM_INT, 0x0C | UMOSCOM_UART_REG); 380 381 /* Magic */ 382 umoscom_cfg_write(sc, 0x01, 0x08); 383 384 /* Magic */ 385 umoscom_cfg_write(sc, 0x00, 0x02); 386 } 387 388 static void 389 umoscom_cfg_close(struct ucom_softc *ucom) 390 { 391 return; 392 } 393 394 static void 395 umoscom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff) 396 { 397 struct umoscom_softc *sc = ucom->sc_parent; 398 uint16_t val; 399 400 val = sc->sc_lcr; 401 if (onoff) 402 val |= UMOSCOM_LCR_BREAK; 403 404 umoscom_cfg_write(sc, UMOSCOM_LCR, val | UMOSCOM_UART_REG); 405 } 406 407 static void 408 umoscom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff) 409 { 410 struct umoscom_softc *sc = ucom->sc_parent; 411 412 if (onoff) 413 sc->sc_mcr |= UMOSCOM_MCR_DTR; 414 else 415 sc->sc_mcr &= ~UMOSCOM_MCR_DTR; 416 417 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 418 } 419 420 static void 421 umoscom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff) 422 { 423 struct umoscom_softc *sc = ucom->sc_parent; 424 425 if (onoff) 426 sc->sc_mcr |= UMOSCOM_MCR_RTS; 427 else 428 sc->sc_mcr &= ~UMOSCOM_MCR_RTS; 429 430 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 431 } 432 433 static int 434 umoscom_pre_param(struct ucom_softc *ucom, struct termios *t) 435 { 436 if ((t->c_ospeed <= 1) || (t->c_ospeed > 115200)) 437 return (EINVAL); 438 439 return (0); 440 } 441 442 static void 443 umoscom_cfg_param(struct ucom_softc *ucom, struct termios *t) 444 { 445 struct umoscom_softc *sc = ucom->sc_parent; 446 uint16_t data; 447 448 DPRINTF("speed=%d\n", t->c_ospeed); 449 450 data = ((uint32_t)UMOSCOM_BAUD_REF) / ((uint32_t)t->c_ospeed); 451 452 if (data == 0) { 453 DPRINTF("invalid baud rate!\n"); 454 return; 455 } 456 umoscom_cfg_write(sc, UMOSCOM_LCR, 457 UMOSCOM_LCR_DIVLATCH_EN | UMOSCOM_UART_REG); 458 459 umoscom_cfg_write(sc, UMOSCOM_BAUDLO, 460 (data & 0xFF) | UMOSCOM_UART_REG); 461 462 umoscom_cfg_write(sc, UMOSCOM_BAUDHI, 463 ((data >> 8) & 0xFF) | UMOSCOM_UART_REG); 464 465 if (t->c_cflag & CSTOPB) 466 data = UMOSCOM_LCR_STOP_BITS_2; 467 else 468 data = UMOSCOM_LCR_STOP_BITS_1; 469 470 if (t->c_cflag & PARENB) { 471 if (t->c_cflag & PARODD) 472 data |= UMOSCOM_LCR_PARITY_ODD; 473 else 474 data |= UMOSCOM_LCR_PARITY_EVEN; 475 } else 476 data |= UMOSCOM_LCR_PARITY_NONE; 477 478 switch (t->c_cflag & CSIZE) { 479 case CS5: 480 data |= UMOSCOM_LCR_DBITS(5); 481 break; 482 case CS6: 483 data |= UMOSCOM_LCR_DBITS(6); 484 break; 485 case CS7: 486 data |= UMOSCOM_LCR_DBITS(7); 487 break; 488 case CS8: 489 data |= UMOSCOM_LCR_DBITS(8); 490 break; 491 } 492 493 sc->sc_lcr = data; 494 umoscom_cfg_write(sc, UMOSCOM_LCR, data | UMOSCOM_UART_REG); 495 } 496 497 static void 498 umoscom_cfg_get_status(struct ucom_softc *ucom, uint8_t *p_lsr, uint8_t *p_msr) 499 { 500 struct umoscom_softc *sc = ucom->sc_parent; 501 uint8_t lsr; 502 uint8_t msr; 503 504 DPRINTFN(5, "\n"); 505 506 /* read status registers */ 507 508 lsr = umoscom_cfg_read(sc, UMOSCOM_LSR); 509 msr = umoscom_cfg_read(sc, UMOSCOM_MSR); 510 511 /* translate bits */ 512 513 if (msr & UMOSCOM_MSR_CTS) 514 *p_msr |= SER_CTS; 515 516 if (msr & UMOSCOM_MSR_CD) 517 *p_msr |= SER_DCD; 518 519 if (msr & UMOSCOM_MSR_RI) 520 *p_msr |= SER_RI; 521 522 if (msr & UMOSCOM_MSR_RTS) 523 *p_msr |= SER_DSR; 524 } 525 526 static void 527 umoscom_cfg_write(struct umoscom_softc *sc, uint16_t reg, uint16_t val) 528 { 529 struct usb_device_request req; 530 531 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 532 req.bRequest = UMOSCOM_WRITE; 533 USETW(req.wValue, val); 534 USETW(req.wIndex, reg); 535 USETW(req.wLength, 0); 536 537 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 538 &req, NULL, 0, 1000); 539 } 540 541 static uint8_t 542 umoscom_cfg_read(struct umoscom_softc *sc, uint16_t reg) 543 { 544 struct usb_device_request req; 545 uint8_t val; 546 547 req.bmRequestType = UT_READ_VENDOR_DEVICE; 548 req.bRequest = UMOSCOM_READ; 549 USETW(req.wValue, 0); 550 USETW(req.wIndex, reg); 551 USETW(req.wLength, 1); 552 553 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 554 &req, &val, 0, 1000); 555 556 DPRINTF("reg=0x%04x, val=0x%02x\n", reg, val); 557 558 return (val); 559 } 560 561 static void 562 umoscom_start_read(struct ucom_softc *ucom) 563 { 564 struct umoscom_softc *sc = ucom->sc_parent; 565 566 #if 0 567 /* start interrupt endpoint */ 568 usbd_transfer_start(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 569 #endif 570 /* start read endpoint */ 571 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 572 } 573 574 static void 575 umoscom_stop_read(struct ucom_softc *ucom) 576 { 577 struct umoscom_softc *sc = ucom->sc_parent; 578 579 /* stop interrupt transfer */ 580 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 581 582 /* stop read endpoint */ 583 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 584 } 585 586 static void 587 umoscom_start_write(struct ucom_softc *ucom) 588 { 589 struct umoscom_softc *sc = ucom->sc_parent; 590 591 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 592 } 593 594 static void 595 umoscom_stop_write(struct ucom_softc *ucom) 596 { 597 struct umoscom_softc *sc = ucom->sc_parent; 598 599 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 600 } 601 602 static void 603 umoscom_write_callback(struct usb_xfer *xfer, usb_error_t error) 604 { 605 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 606 struct usb_page_cache *pc; 607 uint32_t actlen; 608 609 switch (USB_GET_STATE(xfer)) { 610 case USB_ST_SETUP: 611 case USB_ST_TRANSFERRED: 612 tr_setup: 613 DPRINTF("\n"); 614 615 pc = usbd_xfer_get_frame(xfer, 0); 616 if (ucom_get_data(&sc->sc_ucom, pc, 0, 617 UMOSCOM_BUFSIZE, &actlen)) { 618 619 usbd_xfer_set_frame_len(xfer, 0, actlen); 620 usbd_transfer_submit(xfer); 621 } 622 return; 623 624 default: /* Error */ 625 if (error != USB_ERR_CANCELLED) { 626 DPRINTFN(0, "transfer failed\n"); 627 /* try to clear stall first */ 628 usbd_xfer_set_stall(xfer); 629 goto tr_setup; 630 } 631 return; 632 } 633 } 634 635 static void 636 umoscom_read_callback(struct usb_xfer *xfer, usb_error_t error) 637 { 638 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 639 struct usb_page_cache *pc; 640 int actlen; 641 642 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 643 644 switch (USB_GET_STATE(xfer)) { 645 case USB_ST_TRANSFERRED: 646 DPRINTF("got %d bytes\n", actlen); 647 pc = usbd_xfer_get_frame(xfer, 0); 648 ucom_put_data(&sc->sc_ucom, pc, 0, actlen); 649 650 case USB_ST_SETUP: 651 tr_setup: 652 DPRINTF("\n"); 653 654 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 655 usbd_transfer_submit(xfer); 656 return; 657 658 default: /* Error */ 659 if (error != USB_ERR_CANCELLED) { 660 DPRINTFN(0, "transfer failed\n"); 661 /* try to clear stall first */ 662 usbd_xfer_set_stall(xfer); 663 goto tr_setup; 664 } 665 return; 666 } 667 } 668 669 static void 670 umoscom_intr_callback(struct usb_xfer *xfer, usb_error_t error) 671 { 672 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 673 int actlen; 674 675 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 676 677 switch (USB_GET_STATE(xfer)) { 678 case USB_ST_TRANSFERRED: 679 if (actlen < 2) { 680 DPRINTF("too short message\n"); 681 goto tr_setup; 682 } 683 ucom_status_change(&sc->sc_ucom); 684 685 case USB_ST_SETUP: 686 tr_setup: 687 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 688 usbd_transfer_submit(xfer); 689 return; 690 691 default: /* Error */ 692 if (error != USB_ERR_CANCELLED) { 693 DPRINTFN(0, "transfer failed\n"); 694 /* try to clear stall first */ 695 usbd_xfer_set_stall(xfer); 696 goto tr_setup; 697 } 698 return; 699 } 700 } 701 702 static void 703 umoscom_poll(struct ucom_softc *ucom) 704 { 705 struct umoscom_softc *sc = ucom->sc_parent; 706 usbd_transfer_poll(sc->sc_xfer, UMOSCOM_N_TRANSFER); 707 } 708