1 /* $FreeBSD$ */ 2 /* $OpenBSD: umoscom.c,v 1.2 2006/10/26 06:02:43 jsg Exp $ */ 3 4 /* 5 * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 #include <sys/stdint.h> 21 #include <sys/stddef.h> 22 #include <sys/param.h> 23 #include <sys/queue.h> 24 #include <sys/types.h> 25 #include <sys/systm.h> 26 #include <sys/kernel.h> 27 #include <sys/bus.h> 28 #include <sys/module.h> 29 #include <sys/lock.h> 30 #include <sys/mutex.h> 31 #include <sys/condvar.h> 32 #include <sys/sysctl.h> 33 #include <sys/sx.h> 34 #include <sys/unistd.h> 35 #include <sys/callout.h> 36 #include <sys/malloc.h> 37 #include <sys/priv.h> 38 39 #include <dev/usb/usb.h> 40 #include <dev/usb/usbdi.h> 41 #include <dev/usb/usbdi_util.h> 42 #include "usbdevs.h" 43 44 #define USB_DEBUG_VAR umoscom_debug 45 #include <dev/usb/usb_debug.h> 46 #include <dev/usb/usb_process.h> 47 48 #include <dev/usb/serial/usb_serial.h> 49 50 #ifdef USB_DEBUG 51 static int umoscom_debug = 0; 52 53 static SYSCTL_NODE(_hw_usb, OID_AUTO, umoscom, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 54 "USB umoscom"); 55 SYSCTL_INT(_hw_usb_umoscom, OID_AUTO, debug, CTLFLAG_RWTUN, 56 &umoscom_debug, 0, "Debug level"); 57 #endif 58 59 #define UMOSCOM_BUFSIZE 1024 /* bytes */ 60 61 #define UMOSCOM_CONFIG_INDEX 0 62 #define UMOSCOM_IFACE_INDEX 0 63 64 /* interrupt packet */ 65 #define UMOSCOM_IIR_RLS 0x06 66 #define UMOSCOM_IIR_RDA 0x04 67 #define UMOSCOM_IIR_CTI 0x0c 68 #define UMOSCOM_IIR_THR 0x02 69 #define UMOSCOM_IIR_MS 0x00 70 71 /* registers */ 72 #define UMOSCOM_READ 0x0d 73 #define UMOSCOM_WRITE 0x0e 74 #define UMOSCOM_UART_REG 0x0300 75 #define UMOSCOM_VEND_REG 0x0000 76 77 #define UMOSCOM_TXBUF 0x00 /* Write */ 78 #define UMOSCOM_RXBUF 0x00 /* Read */ 79 #define UMOSCOM_INT 0x01 80 #define UMOSCOM_FIFO 0x02 /* Write */ 81 #define UMOSCOM_ISR 0x02 /* Read */ 82 #define UMOSCOM_LCR 0x03 83 #define UMOSCOM_MCR 0x04 84 #define UMOSCOM_LSR 0x05 85 #define UMOSCOM_MSR 0x06 86 #define UMOSCOM_SCRATCH 0x07 87 #define UMOSCOM_DIV_LO 0x08 88 #define UMOSCOM_DIV_HI 0x09 89 #define UMOSCOM_EFR 0x0a 90 #define UMOSCOM_XON1 0x0b 91 #define UMOSCOM_XON2 0x0c 92 #define UMOSCOM_XOFF1 0x0d 93 #define UMOSCOM_XOFF2 0x0e 94 95 #define UMOSCOM_BAUDLO 0x00 96 #define UMOSCOM_BAUDHI 0x01 97 98 #define UMOSCOM_INT_RXEN 0x01 99 #define UMOSCOM_INT_TXEN 0x02 100 #define UMOSCOM_INT_RSEN 0x04 101 #define UMOSCOM_INT_MDMEM 0x08 102 #define UMOSCOM_INT_SLEEP 0x10 103 #define UMOSCOM_INT_XOFF 0x20 104 #define UMOSCOM_INT_RTS 0x40 105 106 #define UMOSCOM_FIFO_EN 0x01 107 #define UMOSCOM_FIFO_RXCLR 0x02 108 #define UMOSCOM_FIFO_TXCLR 0x04 109 #define UMOSCOM_FIFO_DMA_BLK 0x08 110 #define UMOSCOM_FIFO_TXLVL_MASK 0x30 111 #define UMOSCOM_FIFO_TXLVL_8 0x00 112 #define UMOSCOM_FIFO_TXLVL_16 0x10 113 #define UMOSCOM_FIFO_TXLVL_32 0x20 114 #define UMOSCOM_FIFO_TXLVL_56 0x30 115 #define UMOSCOM_FIFO_RXLVL_MASK 0xc0 116 #define UMOSCOM_FIFO_RXLVL_8 0x00 117 #define UMOSCOM_FIFO_RXLVL_16 0x40 118 #define UMOSCOM_FIFO_RXLVL_56 0x80 119 #define UMOSCOM_FIFO_RXLVL_80 0xc0 120 121 #define UMOSCOM_ISR_MDM 0x00 122 #define UMOSCOM_ISR_NONE 0x01 123 #define UMOSCOM_ISR_TX 0x02 124 #define UMOSCOM_ISR_RX 0x04 125 #define UMOSCOM_ISR_LINE 0x06 126 #define UMOSCOM_ISR_RXTIMEOUT 0x0c 127 #define UMOSCOM_ISR_RX_XOFF 0x10 128 #define UMOSCOM_ISR_RTSCTS 0x20 129 #define UMOSCOM_ISR_FIFOEN 0xc0 130 131 #define UMOSCOM_LCR_DBITS(x) ((x) - 5) 132 #define UMOSCOM_LCR_STOP_BITS_1 0x00 133 #define UMOSCOM_LCR_STOP_BITS_2 0x04 /* 2 if 6-8 bits/char or 1.5 if 5 */ 134 #define UMOSCOM_LCR_PARITY_NONE 0x00 135 #define UMOSCOM_LCR_PARITY_ODD 0x08 136 #define UMOSCOM_LCR_PARITY_EVEN 0x18 137 #define UMOSCOM_LCR_BREAK 0x40 138 #define UMOSCOM_LCR_DIVLATCH_EN 0x80 139 140 #define UMOSCOM_MCR_DTR 0x01 141 #define UMOSCOM_MCR_RTS 0x02 142 #define UMOSCOM_MCR_LOOP 0x04 143 #define UMOSCOM_MCR_INTEN 0x08 144 #define UMOSCOM_MCR_LOOPBACK 0x10 145 #define UMOSCOM_MCR_XONANY 0x20 146 #define UMOSCOM_MCR_IRDA_EN 0x40 147 #define UMOSCOM_MCR_BAUD_DIV4 0x80 148 149 #define UMOSCOM_LSR_RXDATA 0x01 150 #define UMOSCOM_LSR_RXOVER 0x02 151 #define UMOSCOM_LSR_RXPAR_ERR 0x04 152 #define UMOSCOM_LSR_RXFRM_ERR 0x08 153 #define UMOSCOM_LSR_RXBREAK 0x10 154 #define UMOSCOM_LSR_TXEMPTY 0x20 155 #define UMOSCOM_LSR_TXALLEMPTY 0x40 156 #define UMOSCOM_LSR_TXFIFO_ERR 0x80 157 158 #define UMOSCOM_MSR_CTS_CHG 0x01 159 #define UMOSCOM_MSR_DSR_CHG 0x02 160 #define UMOSCOM_MSR_RI_CHG 0x04 161 #define UMOSCOM_MSR_CD_CHG 0x08 162 #define UMOSCOM_MSR_CTS 0x10 163 #define UMOSCOM_MSR_RTS 0x20 164 #define UMOSCOM_MSR_RI 0x40 165 #define UMOSCOM_MSR_CD 0x80 166 167 #define UMOSCOM_BAUD_REF 115200 168 169 enum { 170 UMOSCOM_BULK_DT_WR, 171 UMOSCOM_BULK_DT_RD, 172 UMOSCOM_INTR_DT_RD, 173 UMOSCOM_N_TRANSFER, 174 }; 175 176 struct umoscom_softc { 177 struct ucom_super_softc sc_super_ucom; 178 struct ucom_softc sc_ucom; 179 180 struct usb_xfer *sc_xfer[UMOSCOM_N_TRANSFER]; 181 struct usb_device *sc_udev; 182 struct mtx sc_mtx; 183 184 uint8_t sc_mcr; 185 uint8_t sc_lcr; 186 }; 187 188 /* prototypes */ 189 190 static device_probe_t umoscom_probe; 191 static device_attach_t umoscom_attach; 192 static device_detach_t umoscom_detach; 193 static void umoscom_free_softc(struct umoscom_softc *); 194 195 static usb_callback_t umoscom_write_callback; 196 static usb_callback_t umoscom_read_callback; 197 static usb_callback_t umoscom_intr_callback; 198 199 static void umoscom_free(struct ucom_softc *); 200 static void umoscom_cfg_open(struct ucom_softc *); 201 static void umoscom_cfg_close(struct ucom_softc *); 202 static void umoscom_cfg_set_break(struct ucom_softc *, uint8_t); 203 static void umoscom_cfg_set_dtr(struct ucom_softc *, uint8_t); 204 static void umoscom_cfg_set_rts(struct ucom_softc *, uint8_t); 205 static int umoscom_pre_param(struct ucom_softc *, struct termios *); 206 static void umoscom_cfg_param(struct ucom_softc *, struct termios *); 207 static void umoscom_cfg_get_status(struct ucom_softc *, uint8_t *, 208 uint8_t *); 209 static void umoscom_cfg_write(struct umoscom_softc *, uint16_t, uint16_t); 210 static uint8_t umoscom_cfg_read(struct umoscom_softc *, uint16_t); 211 static void umoscom_start_read(struct ucom_softc *); 212 static void umoscom_stop_read(struct ucom_softc *); 213 static void umoscom_start_write(struct ucom_softc *); 214 static void umoscom_stop_write(struct ucom_softc *); 215 static void umoscom_poll(struct ucom_softc *ucom); 216 217 static const struct usb_config umoscom_config_data[UMOSCOM_N_TRANSFER] = { 218 219 [UMOSCOM_BULK_DT_WR] = { 220 .type = UE_BULK, 221 .endpoint = UE_ADDR_ANY, 222 .direction = UE_DIR_OUT, 223 .bufsize = UMOSCOM_BUFSIZE, 224 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 225 .callback = &umoscom_write_callback, 226 }, 227 228 [UMOSCOM_BULK_DT_RD] = { 229 .type = UE_BULK, 230 .endpoint = UE_ADDR_ANY, 231 .direction = UE_DIR_IN, 232 .bufsize = UMOSCOM_BUFSIZE, 233 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 234 .callback = &umoscom_read_callback, 235 }, 236 237 [UMOSCOM_INTR_DT_RD] = { 238 .type = UE_INTERRUPT, 239 .endpoint = UE_ADDR_ANY, 240 .direction = UE_DIR_IN, 241 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 242 .bufsize = 0, /* use wMaxPacketSize */ 243 .callback = &umoscom_intr_callback, 244 }, 245 }; 246 247 static const struct ucom_callback umoscom_callback = { 248 /* configuration callbacks */ 249 .ucom_cfg_get_status = &umoscom_cfg_get_status, 250 .ucom_cfg_set_dtr = &umoscom_cfg_set_dtr, 251 .ucom_cfg_set_rts = &umoscom_cfg_set_rts, 252 .ucom_cfg_set_break = &umoscom_cfg_set_break, 253 .ucom_cfg_param = &umoscom_cfg_param, 254 .ucom_cfg_open = &umoscom_cfg_open, 255 .ucom_cfg_close = &umoscom_cfg_close, 256 257 /* other callbacks */ 258 .ucom_pre_param = &umoscom_pre_param, 259 .ucom_start_read = &umoscom_start_read, 260 .ucom_stop_read = &umoscom_stop_read, 261 .ucom_start_write = &umoscom_start_write, 262 .ucom_stop_write = &umoscom_stop_write, 263 .ucom_poll = &umoscom_poll, 264 .ucom_free = &umoscom_free, 265 }; 266 267 static device_method_t umoscom_methods[] = { 268 DEVMETHOD(device_probe, umoscom_probe), 269 DEVMETHOD(device_attach, umoscom_attach), 270 DEVMETHOD(device_detach, umoscom_detach), 271 DEVMETHOD_END 272 }; 273 274 static devclass_t umoscom_devclass; 275 276 static driver_t umoscom_driver = { 277 .name = "umoscom", 278 .methods = umoscom_methods, 279 .size = sizeof(struct umoscom_softc), 280 }; 281 282 static const STRUCT_USB_HOST_ID umoscom_devs[] = { 283 {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7703, 0)} 284 }; 285 286 DRIVER_MODULE(umoscom, uhub, umoscom_driver, umoscom_devclass, NULL, 0); 287 MODULE_DEPEND(umoscom, ucom, 1, 1, 1); 288 MODULE_DEPEND(umoscom, usb, 1, 1, 1); 289 MODULE_VERSION(umoscom, 1); 290 USB_PNP_HOST_INFO(umoscom_devs); 291 292 static int 293 umoscom_probe(device_t dev) 294 { 295 struct usb_attach_arg *uaa = device_get_ivars(dev); 296 297 if (uaa->usb_mode != USB_MODE_HOST) { 298 return (ENXIO); 299 } 300 if (uaa->info.bConfigIndex != UMOSCOM_CONFIG_INDEX) { 301 return (ENXIO); 302 } 303 if (uaa->info.bIfaceIndex != UMOSCOM_IFACE_INDEX) { 304 return (ENXIO); 305 } 306 return (usbd_lookup_id_by_uaa(umoscom_devs, sizeof(umoscom_devs), uaa)); 307 } 308 309 static int 310 umoscom_attach(device_t dev) 311 { 312 struct usb_attach_arg *uaa = device_get_ivars(dev); 313 struct umoscom_softc *sc = device_get_softc(dev); 314 int error; 315 uint8_t iface_index; 316 317 sc->sc_udev = uaa->device; 318 sc->sc_mcr = 0x08; /* enable interrupts */ 319 320 /* XXX the device doesn't provide any ID string, so set a static one */ 321 device_set_desc(dev, "MOSCHIP USB Serial Port Adapter"); 322 device_printf(dev, "<MOSCHIP USB Serial Port Adapter>\n"); 323 324 mtx_init(&sc->sc_mtx, "umoscom", NULL, MTX_DEF); 325 ucom_ref(&sc->sc_super_ucom); 326 327 iface_index = UMOSCOM_IFACE_INDEX; 328 error = usbd_transfer_setup(uaa->device, &iface_index, 329 sc->sc_xfer, umoscom_config_data, 330 UMOSCOM_N_TRANSFER, sc, &sc->sc_mtx); 331 332 if (error) { 333 goto detach; 334 } 335 /* clear stall at first run */ 336 mtx_lock(&sc->sc_mtx); 337 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 338 usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 339 mtx_unlock(&sc->sc_mtx); 340 341 error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc, 342 &umoscom_callback, &sc->sc_mtx); 343 if (error) { 344 goto detach; 345 } 346 ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev); 347 348 return (0); 349 350 detach: 351 device_printf(dev, "attach error: %s\n", usbd_errstr(error)); 352 umoscom_detach(dev); 353 return (ENXIO); 354 } 355 356 static int 357 umoscom_detach(device_t dev) 358 { 359 struct umoscom_softc *sc = device_get_softc(dev); 360 361 ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom); 362 usbd_transfer_unsetup(sc->sc_xfer, UMOSCOM_N_TRANSFER); 363 364 device_claim_softc(dev); 365 366 umoscom_free_softc(sc); 367 368 return (0); 369 } 370 371 UCOM_UNLOAD_DRAIN(umoscom); 372 373 static void 374 umoscom_free_softc(struct umoscom_softc *sc) 375 { 376 if (ucom_unref(&sc->sc_super_ucom)) { 377 mtx_destroy(&sc->sc_mtx); 378 device_free_softc(sc); 379 } 380 } 381 382 static void 383 umoscom_free(struct ucom_softc *ucom) 384 { 385 umoscom_free_softc(ucom->sc_parent); 386 } 387 388 static void 389 umoscom_cfg_open(struct ucom_softc *ucom) 390 { 391 struct umoscom_softc *sc = ucom->sc_parent; 392 393 DPRINTF("\n"); 394 395 /* Purge FIFOs or odd things happen */ 396 umoscom_cfg_write(sc, UMOSCOM_FIFO, 0x00 | UMOSCOM_UART_REG); 397 398 /* Enable FIFO */ 399 umoscom_cfg_write(sc, UMOSCOM_FIFO, UMOSCOM_FIFO_EN | 400 UMOSCOM_FIFO_RXCLR | UMOSCOM_FIFO_TXCLR | 401 UMOSCOM_FIFO_DMA_BLK | UMOSCOM_FIFO_RXLVL_MASK | 402 UMOSCOM_UART_REG); 403 404 /* Enable Interrupt Registers */ 405 umoscom_cfg_write(sc, UMOSCOM_INT, 0x0C | UMOSCOM_UART_REG); 406 407 /* Magic */ 408 umoscom_cfg_write(sc, 0x01, 0x08); 409 410 /* Magic */ 411 umoscom_cfg_write(sc, 0x00, 0x02); 412 } 413 414 static void 415 umoscom_cfg_close(struct ucom_softc *ucom) 416 { 417 return; 418 } 419 420 static void 421 umoscom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff) 422 { 423 struct umoscom_softc *sc = ucom->sc_parent; 424 uint16_t val; 425 426 val = sc->sc_lcr; 427 if (onoff) 428 val |= UMOSCOM_LCR_BREAK; 429 430 umoscom_cfg_write(sc, UMOSCOM_LCR, val | UMOSCOM_UART_REG); 431 } 432 433 static void 434 umoscom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff) 435 { 436 struct umoscom_softc *sc = ucom->sc_parent; 437 438 if (onoff) 439 sc->sc_mcr |= UMOSCOM_MCR_DTR; 440 else 441 sc->sc_mcr &= ~UMOSCOM_MCR_DTR; 442 443 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 444 } 445 446 static void 447 umoscom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff) 448 { 449 struct umoscom_softc *sc = ucom->sc_parent; 450 451 if (onoff) 452 sc->sc_mcr |= UMOSCOM_MCR_RTS; 453 else 454 sc->sc_mcr &= ~UMOSCOM_MCR_RTS; 455 456 umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG); 457 } 458 459 static int 460 umoscom_pre_param(struct ucom_softc *ucom, struct termios *t) 461 { 462 if ((t->c_ospeed <= 1) || (t->c_ospeed > 115200)) 463 return (EINVAL); 464 465 return (0); 466 } 467 468 static void 469 umoscom_cfg_param(struct ucom_softc *ucom, struct termios *t) 470 { 471 struct umoscom_softc *sc = ucom->sc_parent; 472 uint16_t data; 473 474 DPRINTF("speed=%d\n", t->c_ospeed); 475 476 data = ((uint32_t)UMOSCOM_BAUD_REF) / ((uint32_t)t->c_ospeed); 477 478 if (data == 0) { 479 DPRINTF("invalid baud rate!\n"); 480 return; 481 } 482 umoscom_cfg_write(sc, UMOSCOM_LCR, 483 UMOSCOM_LCR_DIVLATCH_EN | UMOSCOM_UART_REG); 484 485 umoscom_cfg_write(sc, UMOSCOM_BAUDLO, 486 (data & 0xFF) | UMOSCOM_UART_REG); 487 488 umoscom_cfg_write(sc, UMOSCOM_BAUDHI, 489 ((data >> 8) & 0xFF) | UMOSCOM_UART_REG); 490 491 if (t->c_cflag & CSTOPB) 492 data = UMOSCOM_LCR_STOP_BITS_2; 493 else 494 data = UMOSCOM_LCR_STOP_BITS_1; 495 496 if (t->c_cflag & PARENB) { 497 if (t->c_cflag & PARODD) 498 data |= UMOSCOM_LCR_PARITY_ODD; 499 else 500 data |= UMOSCOM_LCR_PARITY_EVEN; 501 } else 502 data |= UMOSCOM_LCR_PARITY_NONE; 503 504 switch (t->c_cflag & CSIZE) { 505 case CS5: 506 data |= UMOSCOM_LCR_DBITS(5); 507 break; 508 case CS6: 509 data |= UMOSCOM_LCR_DBITS(6); 510 break; 511 case CS7: 512 data |= UMOSCOM_LCR_DBITS(7); 513 break; 514 case CS8: 515 data |= UMOSCOM_LCR_DBITS(8); 516 break; 517 } 518 519 sc->sc_lcr = data; 520 umoscom_cfg_write(sc, UMOSCOM_LCR, data | UMOSCOM_UART_REG); 521 } 522 523 static void 524 umoscom_cfg_get_status(struct ucom_softc *ucom, uint8_t *p_lsr, uint8_t *p_msr) 525 { 526 struct umoscom_softc *sc = ucom->sc_parent; 527 uint8_t msr; 528 529 DPRINTFN(5, "\n"); 530 531 /* 532 * Read status registers. MSR bits need translation from ns16550 to 533 * SER_* values. LSR bits are ns16550 in hardware and ucom. 534 */ 535 536 *p_lsr = umoscom_cfg_read(sc, UMOSCOM_LSR); 537 msr = umoscom_cfg_read(sc, UMOSCOM_MSR); 538 539 /* translate bits */ 540 541 if (msr & UMOSCOM_MSR_CTS) 542 *p_msr |= SER_CTS; 543 544 if (msr & UMOSCOM_MSR_CD) 545 *p_msr |= SER_DCD; 546 547 if (msr & UMOSCOM_MSR_RI) 548 *p_msr |= SER_RI; 549 550 if (msr & UMOSCOM_MSR_RTS) 551 *p_msr |= SER_DSR; 552 } 553 554 static void 555 umoscom_cfg_write(struct umoscom_softc *sc, uint16_t reg, uint16_t val) 556 { 557 struct usb_device_request req; 558 559 req.bmRequestType = UT_WRITE_VENDOR_DEVICE; 560 req.bRequest = UMOSCOM_WRITE; 561 USETW(req.wValue, val); 562 USETW(req.wIndex, reg); 563 USETW(req.wLength, 0); 564 565 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 566 &req, NULL, 0, 1000); 567 } 568 569 static uint8_t 570 umoscom_cfg_read(struct umoscom_softc *sc, uint16_t reg) 571 { 572 struct usb_device_request req; 573 uint8_t val; 574 575 req.bmRequestType = UT_READ_VENDOR_DEVICE; 576 req.bRequest = UMOSCOM_READ; 577 USETW(req.wValue, 0); 578 USETW(req.wIndex, reg); 579 USETW(req.wLength, 1); 580 581 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 582 &req, &val, 0, 1000); 583 584 DPRINTF("reg=0x%04x, val=0x%02x\n", reg, val); 585 586 return (val); 587 } 588 589 static void 590 umoscom_start_read(struct ucom_softc *ucom) 591 { 592 struct umoscom_softc *sc = ucom->sc_parent; 593 594 #if 0 595 /* start interrupt endpoint */ 596 usbd_transfer_start(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 597 #endif 598 /* start read endpoint */ 599 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 600 } 601 602 static void 603 umoscom_stop_read(struct ucom_softc *ucom) 604 { 605 struct umoscom_softc *sc = ucom->sc_parent; 606 607 /* stop interrupt transfer */ 608 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_INTR_DT_RD]); 609 610 /* stop read endpoint */ 611 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_RD]); 612 } 613 614 static void 615 umoscom_start_write(struct ucom_softc *ucom) 616 { 617 struct umoscom_softc *sc = ucom->sc_parent; 618 619 usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 620 } 621 622 static void 623 umoscom_stop_write(struct ucom_softc *ucom) 624 { 625 struct umoscom_softc *sc = ucom->sc_parent; 626 627 usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_WR]); 628 } 629 630 static void 631 umoscom_write_callback(struct usb_xfer *xfer, usb_error_t error) 632 { 633 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 634 struct usb_page_cache *pc; 635 uint32_t actlen; 636 637 switch (USB_GET_STATE(xfer)) { 638 case USB_ST_SETUP: 639 case USB_ST_TRANSFERRED: 640 tr_setup: 641 DPRINTF("\n"); 642 643 pc = usbd_xfer_get_frame(xfer, 0); 644 if (ucom_get_data(&sc->sc_ucom, pc, 0, 645 UMOSCOM_BUFSIZE, &actlen)) { 646 647 usbd_xfer_set_frame_len(xfer, 0, actlen); 648 usbd_transfer_submit(xfer); 649 } 650 return; 651 652 default: /* Error */ 653 if (error != USB_ERR_CANCELLED) { 654 DPRINTFN(0, "transfer failed\n"); 655 /* try to clear stall first */ 656 usbd_xfer_set_stall(xfer); 657 goto tr_setup; 658 } 659 return; 660 } 661 } 662 663 static void 664 umoscom_read_callback(struct usb_xfer *xfer, usb_error_t error) 665 { 666 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 667 struct usb_page_cache *pc; 668 int actlen; 669 670 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 671 672 switch (USB_GET_STATE(xfer)) { 673 case USB_ST_TRANSFERRED: 674 DPRINTF("got %d bytes\n", actlen); 675 pc = usbd_xfer_get_frame(xfer, 0); 676 ucom_put_data(&sc->sc_ucom, pc, 0, actlen); 677 678 case USB_ST_SETUP: 679 tr_setup: 680 DPRINTF("\n"); 681 682 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 683 usbd_transfer_submit(xfer); 684 return; 685 686 default: /* Error */ 687 if (error != USB_ERR_CANCELLED) { 688 DPRINTFN(0, "transfer failed\n"); 689 /* try to clear stall first */ 690 usbd_xfer_set_stall(xfer); 691 goto tr_setup; 692 } 693 return; 694 } 695 } 696 697 static void 698 umoscom_intr_callback(struct usb_xfer *xfer, usb_error_t error) 699 { 700 struct umoscom_softc *sc = usbd_xfer_softc(xfer); 701 int actlen; 702 703 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 704 705 switch (USB_GET_STATE(xfer)) { 706 case USB_ST_TRANSFERRED: 707 if (actlen < 2) { 708 DPRINTF("too short message\n"); 709 goto tr_setup; 710 } 711 ucom_status_change(&sc->sc_ucom); 712 713 case USB_ST_SETUP: 714 tr_setup: 715 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 716 usbd_transfer_submit(xfer); 717 return; 718 719 default: /* Error */ 720 if (error != USB_ERR_CANCELLED) { 721 DPRINTFN(0, "transfer failed\n"); 722 /* try to clear stall first */ 723 usbd_xfer_set_stall(xfer); 724 goto tr_setup; 725 } 726 return; 727 } 728 } 729 730 static void 731 umoscom_poll(struct ucom_softc *ucom) 732 { 733 struct umoscom_softc *sc = ucom->sc_parent; 734 usbd_transfer_poll(sc->sc_xfer, UMOSCOM_N_TRANSFER); 735 } 736