xref: /freebsd/sys/dev/usb/serial/ugensa.c (revision ad30f8e79bd1007cc2476e491bd21b4f5e389e0a)
1 /* $FreeBSD$ */
2 /*	$NetBSD: ugensa.c,v 1.9.2.1 2007/03/24 14:55:50 yamt Exp $	*/
3 
4 /*
5  * Copyright (c) 2004, 2005 The NetBSD Foundation, Inc.
6  * All rights reserved.
7  *
8  * This code is derived from software contributed to The NetBSD Foundation
9  * by Roland C. Dowdeswell <elric@netbsd.org>.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30  * POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 /*
34  * NOTE: all function names beginning like "ugensa_cfg_" can only
35  * be called from within the config thread function !
36  */
37 
38 #include <sys/stdint.h>
39 #include <sys/stddef.h>
40 #include <sys/param.h>
41 #include <sys/queue.h>
42 #include <sys/types.h>
43 #include <sys/systm.h>
44 #include <sys/kernel.h>
45 #include <sys/bus.h>
46 #include <sys/module.h>
47 #include <sys/lock.h>
48 #include <sys/mutex.h>
49 #include <sys/condvar.h>
50 #include <sys/sysctl.h>
51 #include <sys/sx.h>
52 #include <sys/unistd.h>
53 #include <sys/callout.h>
54 #include <sys/malloc.h>
55 #include <sys/priv.h>
56 
57 #include <dev/usb/usb.h>
58 #include <dev/usb/usbdi.h>
59 #include "usbdevs.h"
60 
61 #define	USB_DEBUG_VAR usb_debug
62 #include <dev/usb/usb_debug.h>
63 #include <dev/usb/usb_process.h>
64 
65 #include <dev/usb/serial/usb_serial.h>
66 
67 #define	UGENSA_BUF_SIZE		2048	/* bytes */
68 #define	UGENSA_CONFIG_INDEX	0
69 #define	UGENSA_IFACE_INDEX	0
70 #define	UGENSA_IFACE_MAX	8	/* exclusivly */
71 
72 enum {
73 	UGENSA_BULK_DT_WR,
74 	UGENSA_BULK_DT_RD,
75 	UGENSA_N_TRANSFER,
76 };
77 
78 struct ugensa_sub_softc {
79 	struct ucom_softc *sc_ucom_ptr;
80 	struct usb_xfer *sc_xfer[UGENSA_N_TRANSFER];
81 };
82 
83 struct ugensa_softc {
84 	struct ucom_super_softc sc_super_ucom;
85 	struct ucom_softc sc_ucom[UGENSA_IFACE_MAX];
86 	struct ugensa_sub_softc sc_sub[UGENSA_IFACE_MAX];
87 
88 	struct mtx sc_mtx;
89 	uint8_t	sc_niface;
90 };
91 
92 /* prototypes */
93 
94 static device_probe_t ugensa_probe;
95 static device_attach_t ugensa_attach;
96 static device_detach_t ugensa_detach;
97 
98 static usb_callback_t ugensa_bulk_write_callback;
99 static usb_callback_t ugensa_bulk_read_callback;
100 
101 static void	ugensa_start_read(struct ucom_softc *);
102 static void	ugensa_stop_read(struct ucom_softc *);
103 static void	ugensa_start_write(struct ucom_softc *);
104 static void	ugensa_stop_write(struct ucom_softc *);
105 static void	ugensa_poll(struct ucom_softc *ucom);
106 
107 static const struct usb_config ugensa_xfer_config[UGENSA_N_TRANSFER] = {
108 
109 	[UGENSA_BULK_DT_WR] = {
110 		.type = UE_BULK,
111 		.endpoint = UE_ADDR_ANY,
112 		.direction = UE_DIR_OUT,
113 		.bufsize = UGENSA_BUF_SIZE,
114 		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
115 		.callback = &ugensa_bulk_write_callback,
116 	},
117 
118 	[UGENSA_BULK_DT_RD] = {
119 		.type = UE_BULK,
120 		.endpoint = UE_ADDR_ANY,
121 		.direction = UE_DIR_IN,
122 		.bufsize = UGENSA_BUF_SIZE,
123 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
124 		.callback = &ugensa_bulk_read_callback,
125 	},
126 };
127 
128 static const struct ucom_callback ugensa_callback = {
129 	.ucom_start_read = &ugensa_start_read,
130 	.ucom_stop_read = &ugensa_stop_read,
131 	.ucom_start_write = &ugensa_start_write,
132 	.ucom_stop_write = &ugensa_stop_write,
133 	.ucom_poll = &ugensa_poll,
134 };
135 
136 static device_method_t ugensa_methods[] = {
137 	/* Device methods */
138 	DEVMETHOD(device_probe, ugensa_probe),
139 	DEVMETHOD(device_attach, ugensa_attach),
140 	DEVMETHOD(device_detach, ugensa_detach),
141 	{0, 0}
142 };
143 
144 static devclass_t ugensa_devclass;
145 
146 static driver_t ugensa_driver = {
147 	.name = "ugensa",
148 	.methods = ugensa_methods,
149 	.size = sizeof(struct ugensa_softc),
150 };
151 
152 DRIVER_MODULE(ugensa, uhub, ugensa_driver, ugensa_devclass, NULL, 0);
153 MODULE_DEPEND(ugensa, ucom, 1, 1, 1);
154 MODULE_DEPEND(ugensa, usb, 1, 1, 1);
155 MODULE_VERSION(ugensa, 1);
156 
157 static const struct usb_device_id ugensa_devs[] = {
158 	{USB_VPI(USB_VENDOR_AIRPRIME, USB_PRODUCT_AIRPRIME_PC5220, 0)},
159 	{USB_VPI(USB_VENDOR_CMOTECH, USB_PRODUCT_CMOTECH_CDMA_MODEM1, 0)},
160 	{USB_VPI(USB_VENDOR_KYOCERA2, USB_PRODUCT_KYOCERA2_CDMA_MSM_K, 0)},
161 	{USB_VPI(USB_VENDOR_HP, USB_PRODUCT_HP_49GPLUS, 0)},
162 	{USB_VPI(USB_VENDOR_NOVATEL2, USB_PRODUCT_NOVATEL2_FLEXPACKGPS, 0)},
163 };
164 
165 static int
166 ugensa_probe(device_t dev)
167 {
168 	struct usb_attach_arg *uaa = device_get_ivars(dev);
169 
170 	if (uaa->usb_mode != USB_MODE_HOST) {
171 		return (ENXIO);
172 	}
173 	if (uaa->info.bConfigIndex != UGENSA_CONFIG_INDEX) {
174 		return (ENXIO);
175 	}
176 	if (uaa->info.bIfaceIndex != 0) {
177 		return (ENXIO);
178 	}
179 	return (usbd_lookup_id_by_uaa(ugensa_devs, sizeof(ugensa_devs), uaa));
180 }
181 
182 static int
183 ugensa_attach(device_t dev)
184 {
185 	struct usb_attach_arg *uaa = device_get_ivars(dev);
186 	struct ugensa_softc *sc = device_get_softc(dev);
187 	struct ugensa_sub_softc *ssc;
188 	struct usb_interface *iface;
189 	int32_t error;
190 	uint8_t iface_index;
191 	int x, cnt;
192 
193 	device_set_usb_desc(dev);
194 	mtx_init(&sc->sc_mtx, "ugensa", NULL, MTX_DEF);
195 
196 	/* Figure out how many interfaces this device has got */
197 	for (cnt = 0; cnt < UGENSA_IFACE_MAX; cnt++) {
198 		if ((usbd_get_endpoint(uaa->device, cnt, ugensa_xfer_config + 0) == NULL) ||
199 		    (usbd_get_endpoint(uaa->device, cnt, ugensa_xfer_config + 1) == NULL)) {
200 			/* we have reached the end */
201 			break;
202 		}
203 	}
204 
205 	if (cnt == 0) {
206 		device_printf(dev, "No interfaces\n");
207 		goto detach;
208 	}
209 	for (x = 0; x < cnt; x++) {
210 		iface = usbd_get_iface(uaa->device, x);
211 		if (iface->idesc->bInterfaceClass != UICLASS_VENDOR)
212 			/* Not a serial port, most likely a SD reader */
213 			continue;
214 
215 		ssc = sc->sc_sub + sc->sc_niface;
216 		ssc->sc_ucom_ptr = sc->sc_ucom + sc->sc_niface;
217 
218 		iface_index = (UGENSA_IFACE_INDEX + x);
219 		error = usbd_transfer_setup(uaa->device,
220 		    &iface_index, ssc->sc_xfer, ugensa_xfer_config,
221 		    UGENSA_N_TRANSFER, ssc, &sc->sc_mtx);
222 
223 		if (error) {
224 			device_printf(dev, "allocating USB "
225 			    "transfers failed\n");
226 			goto detach;
227 		}
228 		/* clear stall at first run */
229 		mtx_lock(&sc->sc_mtx);
230 		usbd_xfer_set_stall(ssc->sc_xfer[UGENSA_BULK_DT_WR]);
231 		usbd_xfer_set_stall(ssc->sc_xfer[UGENSA_BULK_DT_RD]);
232 		mtx_unlock(&sc->sc_mtx);
233 
234 		/* initialize port number */
235 		ssc->sc_ucom_ptr->sc_portno = sc->sc_niface;
236 		sc->sc_niface++;
237 		if (x != uaa->info.bIfaceIndex)
238 			usbd_set_parent_iface(uaa->device, x,
239 			    uaa->info.bIfaceIndex);
240 	}
241 	device_printf(dev, "Found %d interfaces.\n", sc->sc_niface);
242 
243 	error = ucom_attach(&sc->sc_super_ucom, sc->sc_ucom, sc->sc_niface, sc,
244 	    &ugensa_callback, &sc->sc_mtx);
245 	if (error) {
246 		DPRINTF("attach failed\n");
247 		goto detach;
248 	}
249 	ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
250 
251 	return (0);			/* success */
252 
253 detach:
254 	ugensa_detach(dev);
255 	return (ENXIO);			/* failure */
256 }
257 
258 static int
259 ugensa_detach(device_t dev)
260 {
261 	struct ugensa_softc *sc = device_get_softc(dev);
262 	uint8_t x;
263 
264 	ucom_detach(&sc->sc_super_ucom, sc->sc_ucom);
265 
266 	for (x = 0; x < sc->sc_niface; x++) {
267 		usbd_transfer_unsetup(sc->sc_sub[x].sc_xfer, UGENSA_N_TRANSFER);
268 	}
269 	mtx_destroy(&sc->sc_mtx);
270 
271 	return (0);
272 }
273 
274 static void
275 ugensa_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
276 {
277 	struct ugensa_sub_softc *ssc = usbd_xfer_softc(xfer);
278 	struct usb_page_cache *pc;
279 	uint32_t actlen;
280 
281 	switch (USB_GET_STATE(xfer)) {
282 	case USB_ST_SETUP:
283 	case USB_ST_TRANSFERRED:
284 tr_setup:
285 		pc = usbd_xfer_get_frame(xfer, 0);
286 		if (ucom_get_data(ssc->sc_ucom_ptr, pc, 0,
287 		    UGENSA_BUF_SIZE, &actlen)) {
288 			usbd_xfer_set_frame_len(xfer, 0, actlen);
289 			usbd_transfer_submit(xfer);
290 		}
291 		return;
292 
293 	default:			/* Error */
294 		if (error != USB_ERR_CANCELLED) {
295 			/* try to clear stall first */
296 			usbd_xfer_set_stall(xfer);
297 			goto tr_setup;
298 		}
299 		return;
300 	}
301 }
302 
303 static void
304 ugensa_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
305 {
306 	struct ugensa_sub_softc *ssc = usbd_xfer_softc(xfer);
307 	struct usb_page_cache *pc;
308 	int actlen;
309 
310 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
311 
312 	switch (USB_GET_STATE(xfer)) {
313 	case USB_ST_TRANSFERRED:
314 		pc = usbd_xfer_get_frame(xfer, 0);
315 		ucom_put_data(ssc->sc_ucom_ptr, pc, 0, actlen);
316 
317 	case USB_ST_SETUP:
318 tr_setup:
319 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
320 		usbd_transfer_submit(xfer);
321 		return;
322 
323 	default:			/* Error */
324 		if (error != USB_ERR_CANCELLED) {
325 			/* try to clear stall first */
326 			usbd_xfer_set_stall(xfer);
327 			goto tr_setup;
328 		}
329 		return;
330 	}
331 }
332 
333 static void
334 ugensa_start_read(struct ucom_softc *ucom)
335 {
336 	struct ugensa_softc *sc = ucom->sc_parent;
337 	struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno;
338 
339 	usbd_transfer_start(ssc->sc_xfer[UGENSA_BULK_DT_RD]);
340 }
341 
342 static void
343 ugensa_stop_read(struct ucom_softc *ucom)
344 {
345 	struct ugensa_softc *sc = ucom->sc_parent;
346 	struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno;
347 
348 	usbd_transfer_stop(ssc->sc_xfer[UGENSA_BULK_DT_RD]);
349 }
350 
351 static void
352 ugensa_start_write(struct ucom_softc *ucom)
353 {
354 	struct ugensa_softc *sc = ucom->sc_parent;
355 	struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno;
356 
357 	usbd_transfer_start(ssc->sc_xfer[UGENSA_BULK_DT_WR]);
358 }
359 
360 static void
361 ugensa_stop_write(struct ucom_softc *ucom)
362 {
363 	struct ugensa_softc *sc = ucom->sc_parent;
364 	struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno;
365 
366 	usbd_transfer_stop(ssc->sc_xfer[UGENSA_BULK_DT_WR]);
367 }
368 
369 static void
370 ugensa_poll(struct ucom_softc *ucom)
371 {
372 	struct ugensa_softc *sc = ucom->sc_parent;
373 	struct ugensa_sub_softc *ssc = sc->sc_sub + ucom->sc_portno;
374 
375 	usbd_transfer_poll(ssc->sc_xfer, UGENSA_N_TRANSFER);
376 }
377