xref: /freebsd/sys/dev/usb/serial/uchcom.c (revision d746ab215cc85d8f7ab05c5f866c338782c390ec)
1 /*	$NetBSD: uchcom.c,v 1.1 2007/09/03 17:57:37 tshiozak Exp $	*/
2 
3 /*-
4  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-2-Clause-NetBSD
5  *
6  * Copyright (c) 2007, Takanori Watanabe
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  *
18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
22  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28  * SUCH DAMAGE.
29  */
30 
31 /*
32  * Copyright (c) 2007 The NetBSD Foundation, Inc.
33  * All rights reserved.
34  *
35  * This code is derived from software contributed to The NetBSD Foundation
36  * by Takuya SHIOZAKI (tshiozak@netbsd.org).
37  *
38  * Redistribution and use in source and binary forms, with or without
39  * modification, are permitted provided that the following conditions
40  * are met:
41  * 1. Redistributions of source code must retain the above copyright
42  *    notice, this list of conditions and the following disclaimer.
43  * 2. Redistributions in binary form must reproduce the above copyright
44  *    notice, this list of conditions and the following disclaimer in the
45  *    documentation and/or other materials provided with the distribution.
46  *
47  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
48  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
49  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
50  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
51  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
52  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
53  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
54  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
55  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
56  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
57  * POSSIBILITY OF SUCH DAMAGE.
58  */
59 
60 #include <sys/cdefs.h>
61 __FBSDID("$FreeBSD$");
62 
63 /*
64  * Driver for WinChipHead CH341/340, the worst USB-serial chip in the
65  * world.
66  */
67 
68 #include <sys/stdint.h>
69 #include <sys/stddef.h>
70 #include <sys/param.h>
71 #include <sys/queue.h>
72 #include <sys/types.h>
73 #include <sys/systm.h>
74 #include <sys/kernel.h>
75 #include <sys/bus.h>
76 #include <sys/module.h>
77 #include <sys/lock.h>
78 #include <sys/mutex.h>
79 #include <sys/condvar.h>
80 #include <sys/sysctl.h>
81 #include <sys/sx.h>
82 #include <sys/unistd.h>
83 #include <sys/callout.h>
84 #include <sys/malloc.h>
85 #include <sys/priv.h>
86 
87 #include <dev/usb/usb.h>
88 #include <dev/usb/usbdi.h>
89 #include <dev/usb/usbdi_util.h>
90 #include "usbdevs.h"
91 
92 #define	USB_DEBUG_VAR uchcom_debug
93 #include <dev/usb/usb_debug.h>
94 #include <dev/usb/usb_process.h>
95 
96 #include <dev/usb/serial/usb_serial.h>
97 
98 #ifdef USB_DEBUG
99 static int uchcom_debug = 0;
100 
101 static SYSCTL_NODE(_hw_usb, OID_AUTO, uchcom, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
102     "USB uchcom");
103 SYSCTL_INT(_hw_usb_uchcom, OID_AUTO, debug, CTLFLAG_RWTUN,
104     &uchcom_debug, 0, "uchcom debug level");
105 #endif
106 
107 #define	UCHCOM_IFACE_INDEX	0
108 #define	UCHCOM_CONFIG_INDEX	0
109 
110 #define	UCHCOM_REV_CH340	0x0250
111 #define	UCHCOM_INPUT_BUF_SIZE	8
112 
113 #define	UCHCOM_REQ_GET_VERSION	0x5F
114 #define	UCHCOM_REQ_READ_REG	0x95
115 #define	UCHCOM_REQ_WRITE_REG	0x9A
116 #define	UCHCOM_REQ_RESET	0xA1
117 #define	UCHCOM_REQ_SET_DTRRTS	0xA4
118 
119 #define	UCHCOM_REG_STAT1	0x06
120 #define	UCHCOM_REG_STAT2	0x07
121 #define	UCHCOM_REG_BPS_PRE	0x12
122 #define	UCHCOM_REG_BPS_DIV	0x13
123 #define	UCHCOM_REG_BPS_MOD	0x14
124 #define	UCHCOM_REG_BPS_PAD	0x0F
125 #define	UCHCOM_REG_BREAK1	0x05
126 #define	UCHCOM_REG_LCR1		0x18
127 #define	UCHCOM_REG_LCR2		0x25
128 
129 #define	UCHCOM_VER_20		0x20
130 #define	UCHCOM_VER_30		0x30
131 
132 #define	UCHCOM_BASE_UNKNOWN	0
133 #define	UCHCOM_BPS_MOD_BASE	20000000
134 #define	UCHCOM_BPS_MOD_BASE_OFS	1100
135 
136 #define	UCHCOM_DTR_MASK		0x20
137 #define	UCHCOM_RTS_MASK		0x40
138 
139 #define	UCHCOM_BRK_MASK		0x01
140 
141 #define	UCHCOM_LCR1_MASK	0xAF
142 #define	UCHCOM_LCR2_MASK	0x07
143 #define	UCHCOM_LCR1_RX		0x80
144 #define	UCHCOM_LCR1_TX		0x40
145 #define	UCHCOM_LCR1_PARENB	0x08
146 #define	UCHCOM_LCR1_CS8		0x03
147 #define	UCHCOM_LCR2_PAREVEN	0x07
148 #define	UCHCOM_LCR2_PARODD	0x06
149 #define	UCHCOM_LCR2_PARMARK	0x05
150 #define	UCHCOM_LCR2_PARSPACE	0x04
151 
152 #define	UCHCOM_INTR_STAT1	0x02
153 #define	UCHCOM_INTR_STAT2	0x03
154 #define	UCHCOM_INTR_LEAST	4
155 
156 #define	UCHCOM_BULK_BUF_SIZE 1024	/* bytes */
157 
158 enum {
159 	UCHCOM_BULK_DT_WR,
160 	UCHCOM_BULK_DT_RD,
161 	UCHCOM_INTR_DT_RD,
162 	UCHCOM_N_TRANSFER,
163 };
164 
165 struct uchcom_softc {
166 	struct ucom_super_softc sc_super_ucom;
167 	struct ucom_softc sc_ucom;
168 
169 	struct usb_xfer *sc_xfer[UCHCOM_N_TRANSFER];
170 	struct usb_device *sc_udev;
171 	struct mtx sc_mtx;
172 
173 	uint8_t	sc_dtr;			/* local copy */
174 	uint8_t	sc_rts;			/* local copy */
175 	uint8_t	sc_version;
176 	uint8_t	sc_msr;
177 	uint8_t	sc_lsr;			/* local status register */
178 };
179 
180 struct uchcom_divider {
181 	uint8_t	dv_prescaler;
182 	uint8_t	dv_div;
183 	uint8_t	dv_mod;
184 };
185 
186 struct uchcom_divider_record {
187 	uint32_t dvr_high;
188 	uint32_t dvr_low;
189 	uint32_t dvr_base_clock;
190 	struct uchcom_divider dvr_divider;
191 };
192 
193 static const struct uchcom_divider_record dividers[] =
194 {
195 	{307200, 307200, UCHCOM_BASE_UNKNOWN, {7, 0xD9, 0}},
196 	{921600, 921600, UCHCOM_BASE_UNKNOWN, {7, 0xF3, 0}},
197 	{2999999, 23530, 6000000, {3, 0, 0}},
198 	{23529, 2942, 750000, {2, 0, 0}},
199 	{2941, 368, 93750, {1, 0, 0}},
200 	{367, 1, 11719, {0, 0, 0}},
201 };
202 
203 #define	NUM_DIVIDERS	nitems(dividers)
204 
205 static const STRUCT_USB_HOST_ID uchcom_devs[] = {
206 	{USB_VPI(USB_VENDOR_WCH, USB_PRODUCT_WCH_CH341SER, 0)},
207 	{USB_VPI(USB_VENDOR_WCH2, USB_PRODUCT_WCH2_CH341SER, 0)},
208 	{USB_VPI(USB_VENDOR_WCH2, USB_PRODUCT_WCH2_CH341SER_2, 0)},
209 };
210 
211 /* protypes */
212 
213 static void	uchcom_free(struct ucom_softc *);
214 static int	uchcom_pre_param(struct ucom_softc *, struct termios *);
215 static void	uchcom_cfg_get_status(struct ucom_softc *, uint8_t *,
216 		    uint8_t *);
217 static void	uchcom_cfg_open(struct ucom_softc *ucom);
218 static void	uchcom_cfg_param(struct ucom_softc *, struct termios *);
219 static void	uchcom_cfg_set_break(struct ucom_softc *, uint8_t);
220 static void	uchcom_cfg_set_dtr(struct ucom_softc *, uint8_t);
221 static void	uchcom_cfg_set_rts(struct ucom_softc *, uint8_t);
222 static void	uchcom_start_read(struct ucom_softc *);
223 static void	uchcom_start_write(struct ucom_softc *);
224 static void	uchcom_stop_read(struct ucom_softc *);
225 static void	uchcom_stop_write(struct ucom_softc *);
226 static void	uchcom_update_version(struct uchcom_softc *);
227 static void	uchcom_convert_status(struct uchcom_softc *, uint8_t);
228 static void	uchcom_update_status(struct uchcom_softc *);
229 static void	uchcom_set_dtr_rts(struct uchcom_softc *);
230 static int	uchcom_calc_divider_settings(struct uchcom_divider *, uint32_t);
231 static void	uchcom_set_baudrate(struct uchcom_softc *, uint32_t);
232 static void	uchcom_poll(struct ucom_softc *ucom);
233 
234 static device_probe_t uchcom_probe;
235 static device_attach_t uchcom_attach;
236 static device_detach_t uchcom_detach;
237 static void uchcom_free_softc(struct uchcom_softc *);
238 
239 static usb_callback_t uchcom_intr_callback;
240 static usb_callback_t uchcom_write_callback;
241 static usb_callback_t uchcom_read_callback;
242 
243 static const struct usb_config uchcom_config_data[UCHCOM_N_TRANSFER] = {
244 	[UCHCOM_BULK_DT_WR] = {
245 		.type = UE_BULK,
246 		.endpoint = UE_ADDR_ANY,
247 		.direction = UE_DIR_OUT,
248 		.bufsize = UCHCOM_BULK_BUF_SIZE,
249 		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
250 		.callback = &uchcom_write_callback,
251 	},
252 
253 	[UCHCOM_BULK_DT_RD] = {
254 		.type = UE_BULK,
255 		.endpoint = UE_ADDR_ANY,
256 		.direction = UE_DIR_IN,
257 		.bufsize = UCHCOM_BULK_BUF_SIZE,
258 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
259 		.callback = &uchcom_read_callback,
260 	},
261 
262 	[UCHCOM_INTR_DT_RD] = {
263 		.type = UE_INTERRUPT,
264 		.endpoint = UE_ADDR_ANY,
265 		.direction = UE_DIR_IN,
266 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
267 		.bufsize = 0,	/* use wMaxPacketSize */
268 		.callback = &uchcom_intr_callback,
269 	},
270 };
271 
272 static struct ucom_callback uchcom_callback = {
273 	.ucom_cfg_get_status = &uchcom_cfg_get_status,
274 	.ucom_cfg_set_dtr = &uchcom_cfg_set_dtr,
275 	.ucom_cfg_set_rts = &uchcom_cfg_set_rts,
276 	.ucom_cfg_set_break = &uchcom_cfg_set_break,
277 	.ucom_cfg_open = &uchcom_cfg_open,
278 	.ucom_cfg_param = &uchcom_cfg_param,
279 	.ucom_pre_param = &uchcom_pre_param,
280 	.ucom_start_read = &uchcom_start_read,
281 	.ucom_stop_read = &uchcom_stop_read,
282 	.ucom_start_write = &uchcom_start_write,
283 	.ucom_stop_write = &uchcom_stop_write,
284 	.ucom_poll = &uchcom_poll,
285 	.ucom_free = &uchcom_free,
286 };
287 
288 /* ----------------------------------------------------------------------
289  * driver entry points
290  */
291 
292 static int
293 uchcom_probe(device_t dev)
294 {
295 	struct usb_attach_arg *uaa = device_get_ivars(dev);
296 
297 	DPRINTFN(11, "\n");
298 
299 	if (uaa->usb_mode != USB_MODE_HOST) {
300 		return (ENXIO);
301 	}
302 	if (uaa->info.bConfigIndex != UCHCOM_CONFIG_INDEX) {
303 		return (ENXIO);
304 	}
305 	if (uaa->info.bIfaceIndex != UCHCOM_IFACE_INDEX) {
306 		return (ENXIO);
307 	}
308 	return (usbd_lookup_id_by_uaa(uchcom_devs, sizeof(uchcom_devs), uaa));
309 }
310 
311 static int
312 uchcom_attach(device_t dev)
313 {
314 	struct uchcom_softc *sc = device_get_softc(dev);
315 	struct usb_attach_arg *uaa = device_get_ivars(dev);
316 	int error;
317 	uint8_t iface_index;
318 
319 	DPRINTFN(11, "\n");
320 
321 	device_set_usb_desc(dev);
322 	mtx_init(&sc->sc_mtx, "uchcom", NULL, MTX_DEF);
323 	ucom_ref(&sc->sc_super_ucom);
324 
325 	sc->sc_udev = uaa->device;
326 
327 	switch (uaa->info.idProduct) {
328 	case USB_PRODUCT_WCH2_CH341SER:
329 		device_printf(dev, "CH340 detected\n");
330 		break;
331 	case USB_PRODUCT_WCH2_CH341SER_2:
332 	case USB_PRODUCT_WCH2_CH341SER_3:
333 		device_printf(dev, "CH341 detected\n");
334 		break;
335 	default:
336 		device_printf(dev, "New CH340/CH341 product 0x%04x detected\n",
337 		    uaa->info.idProduct);
338 		break;
339 	}
340 
341 	iface_index = UCHCOM_IFACE_INDEX;
342 	error = usbd_transfer_setup(uaa->device,
343 	    &iface_index, sc->sc_xfer, uchcom_config_data,
344 	    UCHCOM_N_TRANSFER, sc, &sc->sc_mtx);
345 
346 	if (error) {
347 		DPRINTF("one or more missing USB endpoints, "
348 		    "error=%s\n", usbd_errstr(error));
349 		goto detach;
350 	}
351 
352 	/* clear stall at first run */
353 	mtx_lock(&sc->sc_mtx);
354 	usbd_xfer_set_stall(sc->sc_xfer[UCHCOM_BULK_DT_WR]);
355 	usbd_xfer_set_stall(sc->sc_xfer[UCHCOM_BULK_DT_RD]);
356 	mtx_unlock(&sc->sc_mtx);
357 
358 	error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
359 	    &uchcom_callback, &sc->sc_mtx);
360 	if (error) {
361 		goto detach;
362 	}
363 	ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
364 
365 	return (0);
366 
367 detach:
368 	uchcom_detach(dev);
369 	return (ENXIO);
370 }
371 
372 static int
373 uchcom_detach(device_t dev)
374 {
375 	struct uchcom_softc *sc = device_get_softc(dev);
376 
377 	DPRINTFN(11, "\n");
378 
379 	ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
380 	usbd_transfer_unsetup(sc->sc_xfer, UCHCOM_N_TRANSFER);
381 
382 	device_claim_softc(dev);
383 
384 	uchcom_free_softc(sc);
385 
386 	return (0);
387 }
388 
389 UCOM_UNLOAD_DRAIN(uchcom);
390 
391 static void
392 uchcom_free_softc(struct uchcom_softc *sc)
393 {
394 	if (ucom_unref(&sc->sc_super_ucom)) {
395 		mtx_destroy(&sc->sc_mtx);
396 		device_free_softc(sc);
397 	}
398 }
399 
400 static void
401 uchcom_free(struct ucom_softc *ucom)
402 {
403 	uchcom_free_softc(ucom->sc_parent);
404 }
405 
406 /* ----------------------------------------------------------------------
407  * low level i/o
408  */
409 
410 static void
411 uchcom_ctrl_write(struct uchcom_softc *sc, uint8_t reqno,
412     uint16_t value, uint16_t index)
413 {
414 	struct usb_device_request req;
415 
416 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
417 	req.bRequest = reqno;
418 	USETW(req.wValue, value);
419 	USETW(req.wIndex, index);
420 	USETW(req.wLength, 0);
421 
422 	DPRINTF("WR REQ 0x%02X VAL 0x%04X IDX 0x%04X\n",
423 	    reqno, value, index);
424 	ucom_cfg_do_request(sc->sc_udev,
425 	    &sc->sc_ucom, &req, NULL, 0, 1000);
426 }
427 
428 static void
429 uchcom_ctrl_read(struct uchcom_softc *sc, uint8_t reqno,
430     uint16_t value, uint16_t index, void *buf, uint16_t buflen)
431 {
432 	struct usb_device_request req;
433 
434 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
435 	req.bRequest = reqno;
436 	USETW(req.wValue, value);
437 	USETW(req.wIndex, index);
438 	USETW(req.wLength, buflen);
439 
440 	DPRINTF("RD REQ 0x%02X VAL 0x%04X IDX 0x%04X LEN %d\n",
441 	    reqno, value, index, buflen);
442 	ucom_cfg_do_request(sc->sc_udev,
443 	    &sc->sc_ucom, &req, buf, USB_SHORT_XFER_OK, 1000);
444 }
445 
446 static void
447 uchcom_write_reg(struct uchcom_softc *sc,
448     uint8_t reg1, uint8_t val1, uint8_t reg2, uint8_t val2)
449 {
450 	DPRINTF("0x%02X<-0x%02X, 0x%02X<-0x%02X\n",
451 	    (unsigned)reg1, (unsigned)val1,
452 	    (unsigned)reg2, (unsigned)val2);
453 	uchcom_ctrl_write(
454 	    sc, UCHCOM_REQ_WRITE_REG,
455 	    reg1 | ((uint16_t)reg2 << 8), val1 | ((uint16_t)val2 << 8));
456 }
457 
458 static void
459 uchcom_read_reg(struct uchcom_softc *sc,
460     uint8_t reg1, uint8_t *rval1, uint8_t reg2, uint8_t *rval2)
461 {
462 	uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
463 
464 	uchcom_ctrl_read(
465 	    sc, UCHCOM_REQ_READ_REG,
466 	    reg1 | ((uint16_t)reg2 << 8), 0, buf, sizeof(buf));
467 
468 	DPRINTF("0x%02X->0x%02X, 0x%02X->0x%02X\n",
469 	    (unsigned)reg1, (unsigned)buf[0],
470 	    (unsigned)reg2, (unsigned)buf[1]);
471 
472 	if (rval1)
473 		*rval1 = buf[0];
474 	if (rval2)
475 		*rval2 = buf[1];
476 }
477 
478 static void
479 uchcom_get_version(struct uchcom_softc *sc, uint8_t *rver)
480 {
481 	uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
482 
483 	uchcom_ctrl_read(sc, UCHCOM_REQ_GET_VERSION, 0, 0, buf, sizeof(buf));
484 
485 	if (rver)
486 		*rver = buf[0];
487 }
488 
489 static void
490 uchcom_get_status(struct uchcom_softc *sc, uint8_t *rval)
491 {
492 	uchcom_read_reg(sc, UCHCOM_REG_STAT1, rval, UCHCOM_REG_STAT2, NULL);
493 }
494 
495 static void
496 uchcom_set_dtr_rts_10(struct uchcom_softc *sc, uint8_t val)
497 {
498 	uchcom_write_reg(sc, UCHCOM_REG_STAT1, val, UCHCOM_REG_STAT1, val);
499 }
500 
501 static void
502 uchcom_set_dtr_rts_20(struct uchcom_softc *sc, uint8_t val)
503 {
504 	uchcom_ctrl_write(sc, UCHCOM_REQ_SET_DTRRTS, val, 0);
505 }
506 
507 /* ----------------------------------------------------------------------
508  * middle layer
509  */
510 
511 static void
512 uchcom_update_version(struct uchcom_softc *sc)
513 {
514 	uchcom_get_version(sc, &sc->sc_version);
515 	DPRINTF("Chip version: 0x%02x\n", sc->sc_version);
516 }
517 
518 static void
519 uchcom_convert_status(struct uchcom_softc *sc, uint8_t cur)
520 {
521 	sc->sc_dtr = !(cur & UCHCOM_DTR_MASK);
522 	sc->sc_rts = !(cur & UCHCOM_RTS_MASK);
523 
524 	cur = ~cur & 0x0F;
525 	sc->sc_msr = (cur << 4) | ((sc->sc_msr >> 4) ^ cur);
526 }
527 
528 static void
529 uchcom_update_status(struct uchcom_softc *sc)
530 {
531 	uint8_t cur;
532 
533 	uchcom_get_status(sc, &cur);
534 	uchcom_convert_status(sc, cur);
535 }
536 
537 static void
538 uchcom_set_dtr_rts(struct uchcom_softc *sc)
539 {
540 	uint8_t val = 0;
541 
542 	if (sc->sc_dtr)
543 		val |= UCHCOM_DTR_MASK;
544 	if (sc->sc_rts)
545 		val |= UCHCOM_RTS_MASK;
546 
547 	if (sc->sc_version < UCHCOM_VER_20)
548 		uchcom_set_dtr_rts_10(sc, ~val);
549 	else
550 		uchcom_set_dtr_rts_20(sc, ~val);
551 }
552 
553 static void
554 uchcom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
555 {
556 	struct uchcom_softc *sc = ucom->sc_parent;
557 	uint8_t brk1;
558 	uint8_t brk2;
559 
560 	uchcom_read_reg(sc, UCHCOM_REG_BREAK1, &brk1, UCHCOM_REG_LCR1, &brk2);
561 	if (onoff) {
562 		/* on - clear bits */
563 		brk1 &= ~UCHCOM_BRK_MASK;
564 		brk2 &= ~UCHCOM_LCR1_TX;
565 	} else {
566 		/* off - set bits */
567 		brk1 |= UCHCOM_BRK_MASK;
568 		brk2 |= UCHCOM_LCR1_TX;
569 	}
570 	uchcom_write_reg(sc, UCHCOM_REG_BREAK1, brk1, UCHCOM_REG_LCR1, brk2);
571 }
572 
573 static int
574 uchcom_calc_divider_settings(struct uchcom_divider *dp, uint32_t rate)
575 {
576 	const struct uchcom_divider_record *rp;
577 	uint32_t div;
578 	uint32_t rem;
579 	uint32_t mod;
580 	uint8_t i;
581 
582 	/* find record */
583 	for (i = 0; i != NUM_DIVIDERS; i++) {
584 		if (dividers[i].dvr_high >= rate &&
585 		    dividers[i].dvr_low <= rate) {
586 			rp = &dividers[i];
587 			goto found;
588 		}
589 	}
590 	return (-1);
591 
592 found:
593 	dp->dv_prescaler = rp->dvr_divider.dv_prescaler;
594 	if (rp->dvr_base_clock == UCHCOM_BASE_UNKNOWN)
595 		dp->dv_div = rp->dvr_divider.dv_div;
596 	else {
597 		div = rp->dvr_base_clock / rate;
598 		rem = rp->dvr_base_clock % rate;
599 		if (div == 0 || div >= 0xFF)
600 			return (-1);
601 		if ((rem << 1) >= rate)
602 			div += 1;
603 		dp->dv_div = (uint8_t)-div;
604 	}
605 
606 	mod = (UCHCOM_BPS_MOD_BASE / rate) + UCHCOM_BPS_MOD_BASE_OFS;
607 	mod = mod + (mod / 2);
608 
609 	dp->dv_mod = (mod + 0xFF) / 0x100;
610 
611 	return (0);
612 }
613 
614 static void
615 uchcom_set_baudrate(struct uchcom_softc *sc, uint32_t rate)
616 {
617 	struct uchcom_divider dv;
618 
619 	if (uchcom_calc_divider_settings(&dv, rate))
620 		return;
621 
622 	/*
623 	 * According to linux code we need to set bit 7 of UCHCOM_REG_BPS_PRE,
624 	 * otherwise the chip will buffer data.
625 	 */
626 	uchcom_write_reg(sc,
627 	    UCHCOM_REG_BPS_PRE, dv.dv_prescaler | 0x80,
628 	    UCHCOM_REG_BPS_DIV, dv.dv_div);
629 	uchcom_write_reg(sc,
630 	    UCHCOM_REG_BPS_MOD, dv.dv_mod,
631 	    UCHCOM_REG_BPS_PAD, 0);
632 }
633 
634 /* ----------------------------------------------------------------------
635  * methods for ucom
636  */
637 static void
638 uchcom_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
639 {
640 	struct uchcom_softc *sc = ucom->sc_parent;
641 
642 	DPRINTF("\n");
643 
644 	/* XXX Note: sc_lsr is always zero */
645 	*lsr = sc->sc_lsr;
646 	*msr = sc->sc_msr;
647 }
648 
649 static void
650 uchcom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
651 {
652 	struct uchcom_softc *sc = ucom->sc_parent;
653 
654 	DPRINTF("onoff = %d\n", onoff);
655 
656 	sc->sc_dtr = onoff;
657 	uchcom_set_dtr_rts(sc);
658 }
659 
660 static void
661 uchcom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
662 {
663 	struct uchcom_softc *sc = ucom->sc_parent;
664 
665 	DPRINTF("onoff = %d\n", onoff);
666 
667 	sc->sc_rts = onoff;
668 	uchcom_set_dtr_rts(sc);
669 }
670 
671 static void
672 uchcom_cfg_open(struct ucom_softc *ucom)
673 {
674 	struct uchcom_softc *sc = ucom->sc_parent;
675 
676 	DPRINTF("\n");
677 
678 	uchcom_update_version(sc);
679 	uchcom_update_status(sc);
680 }
681 
682 static int
683 uchcom_pre_param(struct ucom_softc *ucom, struct termios *t)
684 {
685 	struct uchcom_divider dv;
686 
687 	switch (t->c_cflag & CSIZE) {
688 	case CS8:
689 		break;
690 	default:
691 		return (EIO);
692 	}
693 	if ((t->c_cflag & CSTOPB) != 0)
694 		return (EIO);
695 	if ((t->c_cflag & PARENB) != 0)
696 		return (EIO);
697 
698 	if (uchcom_calc_divider_settings(&dv, t->c_ospeed)) {
699 		return (EIO);
700 	}
701 	return (0);			/* success */
702 }
703 
704 static void
705 uchcom_cfg_param(struct ucom_softc *ucom, struct termios *t)
706 {
707 	struct uchcom_softc *sc = ucom->sc_parent;
708 
709 	uchcom_get_version(sc, NULL);
710 	uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0, 0);
711 	uchcom_set_baudrate(sc, t->c_ospeed);
712 	if (sc->sc_version < UCHCOM_VER_30) {
713 		uchcom_read_reg(sc, UCHCOM_REG_LCR1, NULL,
714 		    UCHCOM_REG_LCR2, NULL);
715 		uchcom_write_reg(sc, UCHCOM_REG_LCR1, 0x50,
716 		    UCHCOM_REG_LCR2, 0x00);
717 	} else {
718 		/*
719 		 * Set up line control:
720 		 * - enable transmit and receive
721 		 * - set 8n1 mode
722 		 * To do: support other sizes, parity, stop bits.
723 		 */
724 		uchcom_write_reg(sc,
725 		    UCHCOM_REG_LCR1,
726 		    UCHCOM_LCR1_RX | UCHCOM_LCR1_TX | UCHCOM_LCR1_CS8,
727 		    UCHCOM_REG_LCR2, 0x00);
728 	}
729 	uchcom_update_status(sc);
730 	uchcom_ctrl_write(sc, UCHCOM_REQ_RESET, 0x501f, 0xd90a);
731 	uchcom_set_baudrate(sc, t->c_ospeed);
732 	uchcom_set_dtr_rts(sc);
733 	uchcom_update_status(sc);
734 }
735 
736 static void
737 uchcom_start_read(struct ucom_softc *ucom)
738 {
739 	struct uchcom_softc *sc = ucom->sc_parent;
740 
741 	/* start interrupt endpoint */
742 	usbd_transfer_start(sc->sc_xfer[UCHCOM_INTR_DT_RD]);
743 
744 	/* start read endpoint */
745 	usbd_transfer_start(sc->sc_xfer[UCHCOM_BULK_DT_RD]);
746 }
747 
748 static void
749 uchcom_stop_read(struct ucom_softc *ucom)
750 {
751 	struct uchcom_softc *sc = ucom->sc_parent;
752 
753 	/* stop interrupt endpoint */
754 	usbd_transfer_stop(sc->sc_xfer[UCHCOM_INTR_DT_RD]);
755 
756 	/* stop read endpoint */
757 	usbd_transfer_stop(sc->sc_xfer[UCHCOM_BULK_DT_RD]);
758 }
759 
760 static void
761 uchcom_start_write(struct ucom_softc *ucom)
762 {
763 	struct uchcom_softc *sc = ucom->sc_parent;
764 
765 	usbd_transfer_start(sc->sc_xfer[UCHCOM_BULK_DT_WR]);
766 }
767 
768 static void
769 uchcom_stop_write(struct ucom_softc *ucom)
770 {
771 	struct uchcom_softc *sc = ucom->sc_parent;
772 
773 	usbd_transfer_stop(sc->sc_xfer[UCHCOM_BULK_DT_WR]);
774 }
775 
776 /* ----------------------------------------------------------------------
777  * callback when the modem status is changed.
778  */
779 static void
780 uchcom_intr_callback(struct usb_xfer *xfer, usb_error_t error)
781 {
782 	struct uchcom_softc *sc = usbd_xfer_softc(xfer);
783 	struct usb_page_cache *pc;
784 	uint8_t buf[UCHCOM_INTR_LEAST];
785 	int actlen;
786 
787 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
788 
789 	switch (USB_GET_STATE(xfer)) {
790 	case USB_ST_TRANSFERRED:
791 
792 		DPRINTF("actlen = %u\n", actlen);
793 
794 		if (actlen >= UCHCOM_INTR_LEAST) {
795 			pc = usbd_xfer_get_frame(xfer, 0);
796 			usbd_copy_out(pc, 0, buf, UCHCOM_INTR_LEAST);
797 
798 			DPRINTF("data = 0x%02X 0x%02X 0x%02X 0x%02X\n",
799 			    (unsigned)buf[0], (unsigned)buf[1],
800 			    (unsigned)buf[2], (unsigned)buf[3]);
801 
802 			uchcom_convert_status(sc, buf[UCHCOM_INTR_STAT1]);
803 			ucom_status_change(&sc->sc_ucom);
804 		}
805 	case USB_ST_SETUP:
806 tr_setup:
807 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
808 		usbd_transfer_submit(xfer);
809 		break;
810 
811 	default:			/* Error */
812 		if (error != USB_ERR_CANCELLED) {
813 			/* try to clear stall first */
814 			usbd_xfer_set_stall(xfer);
815 			goto tr_setup;
816 		}
817 		break;
818 	}
819 }
820 
821 static void
822 uchcom_write_callback(struct usb_xfer *xfer, usb_error_t error)
823 {
824 	struct uchcom_softc *sc = usbd_xfer_softc(xfer);
825 	struct usb_page_cache *pc;
826 	uint32_t actlen;
827 
828 	switch (USB_GET_STATE(xfer)) {
829 	case USB_ST_SETUP:
830 	case USB_ST_TRANSFERRED:
831 tr_setup:
832 		pc = usbd_xfer_get_frame(xfer, 0);
833 		if (ucom_get_data(&sc->sc_ucom, pc, 0,
834 		    usbd_xfer_max_len(xfer), &actlen)) {
835 			DPRINTF("actlen = %d\n", actlen);
836 
837 			usbd_xfer_set_frame_len(xfer, 0, actlen);
838 			usbd_transfer_submit(xfer);
839 		}
840 		break;
841 
842 	default:			/* Error */
843 		if (error != USB_ERR_CANCELLED) {
844 			/* try to clear stall first */
845 			usbd_xfer_set_stall(xfer);
846 			goto tr_setup;
847 		}
848 		break;
849 	}
850 }
851 
852 static void
853 uchcom_read_callback(struct usb_xfer *xfer, usb_error_t error)
854 {
855 	struct uchcom_softc *sc = usbd_xfer_softc(xfer);
856 	struct usb_page_cache *pc;
857 	int actlen;
858 
859 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
860 
861 	switch (USB_GET_STATE(xfer)) {
862 	case USB_ST_TRANSFERRED:
863 
864 		if (actlen > 0) {
865 			pc = usbd_xfer_get_frame(xfer, 0);
866 			ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
867 		}
868 
869 	case USB_ST_SETUP:
870 tr_setup:
871 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
872 		usbd_transfer_submit(xfer);
873 		break;
874 
875 	default:			/* Error */
876 		if (error != USB_ERR_CANCELLED) {
877 			/* try to clear stall first */
878 			usbd_xfer_set_stall(xfer);
879 			goto tr_setup;
880 		}
881 		break;
882 	}
883 }
884 
885 static void
886 uchcom_poll(struct ucom_softc *ucom)
887 {
888 	struct uchcom_softc *sc = ucom->sc_parent;
889 	usbd_transfer_poll(sc->sc_xfer, UCHCOM_N_TRANSFER);
890 }
891 
892 static device_method_t uchcom_methods[] = {
893 	/* Device interface */
894 	DEVMETHOD(device_probe, uchcom_probe),
895 	DEVMETHOD(device_attach, uchcom_attach),
896 	DEVMETHOD(device_detach, uchcom_detach),
897 	DEVMETHOD_END
898 };
899 
900 static driver_t uchcom_driver = {
901 	.name = "uchcom",
902 	.methods = uchcom_methods,
903 	.size = sizeof(struct uchcom_softc)
904 };
905 
906 static devclass_t uchcom_devclass;
907 
908 DRIVER_MODULE(uchcom, uhub, uchcom_driver, uchcom_devclass, NULL, 0);
909 MODULE_DEPEND(uchcom, ucom, 1, 1, 1);
910 MODULE_DEPEND(uchcom, usb, 1, 1, 1);
911 MODULE_VERSION(uchcom, 1);
912 USB_PNP_HOST_INFO(uchcom_devs);
913