1 /*- 2 * Copyright (c) 2004 Bernd Walter <ticso@FreeBSD.org> 3 * 4 * $URL: https://devel.bwct.de/svn/projects/ubser/ubser.c $ 5 * $Date: 2004-02-29 01:53:10 +0100 (Sun, 29 Feb 2004) $ 6 * $Author: ticso $ 7 * $Rev: 1127 $ 8 */ 9 10 /*- 11 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD AND BSD-2-Clause-NetBSD 12 * 13 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 14 * All rights reserved. 15 * 16 * Redistribution and use in source and binary forms, with or without 17 * modification, are permitted provided that the following conditions 18 * are met: 19 * 1. Redistributions of source code must retain the above copyright 20 * notice, this list of conditions and the following disclaimer. 21 * 2. Redistributions in binary form must reproduce the above copyright 22 * notice, this list of conditions and the following disclaimer in the 23 * documentation and/or other materials provided with the distribution. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 28 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 29 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 30 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 31 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 32 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 33 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 34 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 35 * SUCH DAMAGE. 36 */ 37 38 /*- 39 * Copyright (c) 2000 The NetBSD Foundation, Inc. 40 * All rights reserved. 41 * 42 * This code is derived from software contributed to The NetBSD Foundation 43 * by Lennart Augustsson (lennart@augustsson.net). 44 * 45 * Redistribution and use in source and binary forms, with or without 46 * modification, are permitted provided that the following conditions 47 * are met: 48 * 1. Redistributions of source code must retain the above copyright 49 * notice, this list of conditions and the following disclaimer. 50 * 2. Redistributions in binary form must reproduce the above copyright 51 * notice, this list of conditions and the following disclaimer in the 52 * documentation and/or other materials provided with the distribution. 53 * 54 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 55 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 56 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 57 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 58 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 59 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 60 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 61 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 62 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 63 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 64 * POSSIBILITY OF SUCH DAMAGE. 65 */ 66 67 #include <sys/cdefs.h> 68 __FBSDID("$FreeBSD$"); 69 70 /* 71 * BWCT serial adapter driver 72 */ 73 74 #include <sys/stdint.h> 75 #include <sys/stddef.h> 76 #include <sys/param.h> 77 #include <sys/queue.h> 78 #include <sys/types.h> 79 #include <sys/systm.h> 80 #include <sys/kernel.h> 81 #include <sys/bus.h> 82 #include <sys/module.h> 83 #include <sys/lock.h> 84 #include <sys/mutex.h> 85 #include <sys/condvar.h> 86 #include <sys/sysctl.h> 87 #include <sys/sx.h> 88 #include <sys/unistd.h> 89 #include <sys/callout.h> 90 #include <sys/malloc.h> 91 #include <sys/priv.h> 92 93 #include <dev/usb/usb.h> 94 #include <dev/usb/usbdi.h> 95 #include <dev/usb/usbdi_util.h> 96 #include "usbdevs.h" 97 98 #define USB_DEBUG_VAR ubser_debug 99 #include <dev/usb/usb_debug.h> 100 #include <dev/usb/usb_process.h> 101 102 #include <dev/usb/serial/usb_serial.h> 103 104 #define UBSER_UNIT_MAX 32 105 106 /* Vendor Interface Requests */ 107 #define VENDOR_GET_NUMSER 0x01 108 #define VENDOR_SET_BREAK 0x02 109 #define VENDOR_CLEAR_BREAK 0x03 110 111 #ifdef USB_DEBUG 112 static int ubser_debug = 0; 113 114 static SYSCTL_NODE(_hw_usb, OID_AUTO, ubser, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 115 "USB ubser"); 116 SYSCTL_INT(_hw_usb_ubser, OID_AUTO, debug, CTLFLAG_RWTUN, 117 &ubser_debug, 0, "ubser debug level"); 118 #endif 119 120 enum { 121 UBSER_BULK_DT_WR, 122 UBSER_BULK_DT_RD, 123 UBSER_N_TRANSFER, 124 }; 125 126 struct ubser_softc { 127 struct ucom_super_softc sc_super_ucom; 128 struct ucom_softc sc_ucom[UBSER_UNIT_MAX]; 129 130 struct usb_xfer *sc_xfer[UBSER_N_TRANSFER]; 131 struct usb_device *sc_udev; 132 struct mtx sc_mtx; 133 134 uint16_t sc_tx_size; 135 136 uint8_t sc_numser; 137 uint8_t sc_iface_no; 138 uint8_t sc_iface_index; 139 uint8_t sc_curr_tx_unit; 140 }; 141 142 /* prototypes */ 143 144 static device_probe_t ubser_probe; 145 static device_attach_t ubser_attach; 146 static device_detach_t ubser_detach; 147 static void ubser_free_softc(struct ubser_softc *); 148 149 static usb_callback_t ubser_write_callback; 150 static usb_callback_t ubser_read_callback; 151 152 static void ubser_free(struct ucom_softc *); 153 static int ubser_pre_param(struct ucom_softc *, struct termios *); 154 static void ubser_cfg_set_break(struct ucom_softc *, uint8_t); 155 static void ubser_cfg_get_status(struct ucom_softc *, uint8_t *, 156 uint8_t *); 157 static void ubser_start_read(struct ucom_softc *); 158 static void ubser_stop_read(struct ucom_softc *); 159 static void ubser_start_write(struct ucom_softc *); 160 static void ubser_stop_write(struct ucom_softc *); 161 static void ubser_poll(struct ucom_softc *ucom); 162 163 static const struct usb_config ubser_config[UBSER_N_TRANSFER] = { 164 [UBSER_BULK_DT_WR] = { 165 .type = UE_BULK, 166 .endpoint = UE_ADDR_ANY, 167 .direction = UE_DIR_OUT, 168 .bufsize = 0, /* use wMaxPacketSize */ 169 .flags = {.pipe_bof = 1,.force_short_xfer = 1,}, 170 .callback = &ubser_write_callback, 171 }, 172 173 [UBSER_BULK_DT_RD] = { 174 .type = UE_BULK, 175 .endpoint = UE_ADDR_ANY, 176 .direction = UE_DIR_IN, 177 .bufsize = 0, /* use wMaxPacketSize */ 178 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 179 .callback = &ubser_read_callback, 180 }, 181 }; 182 183 static const struct ucom_callback ubser_callback = { 184 .ucom_cfg_set_break = &ubser_cfg_set_break, 185 .ucom_cfg_get_status = &ubser_cfg_get_status, 186 .ucom_pre_param = &ubser_pre_param, 187 .ucom_start_read = &ubser_start_read, 188 .ucom_stop_read = &ubser_stop_read, 189 .ucom_start_write = &ubser_start_write, 190 .ucom_stop_write = &ubser_stop_write, 191 .ucom_poll = &ubser_poll, 192 .ucom_free = &ubser_free, 193 }; 194 195 static device_method_t ubser_methods[] = { 196 DEVMETHOD(device_probe, ubser_probe), 197 DEVMETHOD(device_attach, ubser_attach), 198 DEVMETHOD(device_detach, ubser_detach), 199 DEVMETHOD_END 200 }; 201 202 static driver_t ubser_driver = { 203 .name = "ubser", 204 .methods = ubser_methods, 205 .size = sizeof(struct ubser_softc), 206 }; 207 208 DRIVER_MODULE(ubser, uhub, ubser_driver, NULL, NULL); 209 MODULE_DEPEND(ubser, ucom, 1, 1, 1); 210 MODULE_DEPEND(ubser, usb, 1, 1, 1); 211 MODULE_VERSION(ubser, 1); 212 213 static int 214 ubser_probe(device_t dev) 215 { 216 struct usb_attach_arg *uaa = device_get_ivars(dev); 217 218 if (uaa->usb_mode != USB_MODE_HOST) { 219 return (ENXIO); 220 } 221 /* check if this is a BWCT vendor specific ubser interface */ 222 if ((strcmp(usb_get_manufacturer(uaa->device), "BWCT") == 0) && 223 (uaa->info.bInterfaceClass == 0xff) && 224 (uaa->info.bInterfaceSubClass == 0x00)) 225 return (0); 226 227 return (ENXIO); 228 } 229 230 static int 231 ubser_attach(device_t dev) 232 { 233 struct usb_attach_arg *uaa = device_get_ivars(dev); 234 struct ubser_softc *sc = device_get_softc(dev); 235 struct usb_device_request req; 236 uint8_t n; 237 int error; 238 239 device_set_usb_desc(dev); 240 mtx_init(&sc->sc_mtx, "ubser", NULL, MTX_DEF); 241 ucom_ref(&sc->sc_super_ucom); 242 243 sc->sc_iface_no = uaa->info.bIfaceNum; 244 sc->sc_iface_index = uaa->info.bIfaceIndex; 245 sc->sc_udev = uaa->device; 246 247 /* get number of serials */ 248 req.bmRequestType = UT_READ_VENDOR_INTERFACE; 249 req.bRequest = VENDOR_GET_NUMSER; 250 USETW(req.wValue, 0); 251 req.wIndex[0] = sc->sc_iface_no; 252 req.wIndex[1] = 0; 253 USETW(req.wLength, 1); 254 error = usbd_do_request_flags(uaa->device, NULL, 255 &req, &sc->sc_numser, 256 0, NULL, USB_DEFAULT_TIMEOUT); 257 258 if (error || (sc->sc_numser == 0)) { 259 device_printf(dev, "failed to get number " 260 "of serial ports: %s\n", 261 usbd_errstr(error)); 262 goto detach; 263 } 264 if (sc->sc_numser > UBSER_UNIT_MAX) 265 sc->sc_numser = UBSER_UNIT_MAX; 266 267 device_printf(dev, "found %i serials\n", sc->sc_numser); 268 269 error = usbd_transfer_setup(uaa->device, &sc->sc_iface_index, 270 sc->sc_xfer, ubser_config, UBSER_N_TRANSFER, sc, &sc->sc_mtx); 271 if (error) { 272 goto detach; 273 } 274 sc->sc_tx_size = usbd_xfer_max_len(sc->sc_xfer[UBSER_BULK_DT_WR]); 275 276 if (sc->sc_tx_size == 0) { 277 DPRINTFN(0, "invalid tx_size\n"); 278 goto detach; 279 } 280 /* initialize port numbers */ 281 282 for (n = 0; n < sc->sc_numser; n++) { 283 sc->sc_ucom[n].sc_portno = n; 284 } 285 286 error = ucom_attach(&sc->sc_super_ucom, sc->sc_ucom, 287 sc->sc_numser, sc, &ubser_callback, &sc->sc_mtx); 288 if (error) { 289 goto detach; 290 } 291 ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev); 292 293 mtx_lock(&sc->sc_mtx); 294 usbd_xfer_set_stall(sc->sc_xfer[UBSER_BULK_DT_WR]); 295 usbd_xfer_set_stall(sc->sc_xfer[UBSER_BULK_DT_RD]); 296 usbd_transfer_start(sc->sc_xfer[UBSER_BULK_DT_RD]); 297 mtx_unlock(&sc->sc_mtx); 298 299 return (0); /* success */ 300 301 detach: 302 ubser_detach(dev); 303 return (ENXIO); /* failure */ 304 } 305 306 static int 307 ubser_detach(device_t dev) 308 { 309 struct ubser_softc *sc = device_get_softc(dev); 310 311 DPRINTF("\n"); 312 313 ucom_detach(&sc->sc_super_ucom, sc->sc_ucom); 314 usbd_transfer_unsetup(sc->sc_xfer, UBSER_N_TRANSFER); 315 316 device_claim_softc(dev); 317 318 ubser_free_softc(sc); 319 320 return (0); 321 } 322 323 UCOM_UNLOAD_DRAIN(ubser); 324 325 static void 326 ubser_free_softc(struct ubser_softc *sc) 327 { 328 if (ucom_unref(&sc->sc_super_ucom)) { 329 mtx_destroy(&sc->sc_mtx); 330 device_free_softc(sc); 331 } 332 } 333 334 static void 335 ubser_free(struct ucom_softc *ucom) 336 { 337 ubser_free_softc(ucom->sc_parent); 338 } 339 340 static int 341 ubser_pre_param(struct ucom_softc *ucom, struct termios *t) 342 { 343 DPRINTF("\n"); 344 345 /* 346 * The firmware on our devices can only do 8n1@9600bps 347 * without handshake. 348 * We refuse to accept other configurations. 349 */ 350 351 /* ensure 9600bps */ 352 switch (t->c_ospeed) { 353 case 9600: 354 break; 355 default: 356 return (EINVAL); 357 } 358 359 /* 2 stop bits not possible */ 360 if (t->c_cflag & CSTOPB) 361 return (EINVAL); 362 363 /* XXX parity handling not possible with current firmware */ 364 if (t->c_cflag & PARENB) 365 return (EINVAL); 366 367 /* we can only do 8 data bits */ 368 switch (t->c_cflag & CSIZE) { 369 case CS8: 370 break; 371 default: 372 return (EINVAL); 373 } 374 375 /* we can't do any kind of hardware handshaking */ 376 if ((t->c_cflag & 377 (CRTS_IFLOW | CDTR_IFLOW | CDSR_OFLOW | CCAR_OFLOW)) != 0) 378 return (EINVAL); 379 380 /* 381 * XXX xon/xoff not supported by the firmware! 382 * This is handled within FreeBSD only and may overflow buffers 383 * because of delayed reaction due to device buffering. 384 */ 385 386 return (0); 387 } 388 389 static __inline void 390 ubser_inc_tx_unit(struct ubser_softc *sc) 391 { 392 sc->sc_curr_tx_unit++; 393 if (sc->sc_curr_tx_unit >= sc->sc_numser) { 394 sc->sc_curr_tx_unit = 0; 395 } 396 } 397 398 static void 399 ubser_write_callback(struct usb_xfer *xfer, usb_error_t error) 400 { 401 struct ubser_softc *sc = usbd_xfer_softc(xfer); 402 struct usb_page_cache *pc; 403 uint8_t buf[1]; 404 uint8_t first_unit = sc->sc_curr_tx_unit; 405 uint32_t actlen; 406 407 switch (USB_GET_STATE(xfer)) { 408 case USB_ST_SETUP: 409 case USB_ST_TRANSFERRED: 410 tr_setup: 411 pc = usbd_xfer_get_frame(xfer, 0); 412 do { 413 if (ucom_get_data(sc->sc_ucom + sc->sc_curr_tx_unit, 414 pc, 1, sc->sc_tx_size - 1, 415 &actlen)) { 416 buf[0] = sc->sc_curr_tx_unit; 417 418 usbd_copy_in(pc, 0, buf, 1); 419 420 usbd_xfer_set_frame_len(xfer, 0, actlen + 1); 421 usbd_transfer_submit(xfer); 422 423 ubser_inc_tx_unit(sc); /* round robin */ 424 425 break; 426 } 427 ubser_inc_tx_unit(sc); 428 429 } while (sc->sc_curr_tx_unit != first_unit); 430 431 return; 432 433 default: /* Error */ 434 if (error != USB_ERR_CANCELLED) { 435 /* try to clear stall first */ 436 usbd_xfer_set_stall(xfer); 437 goto tr_setup; 438 } 439 return; 440 } 441 } 442 443 static void 444 ubser_read_callback(struct usb_xfer *xfer, usb_error_t error) 445 { 446 struct ubser_softc *sc = usbd_xfer_softc(xfer); 447 struct usb_page_cache *pc; 448 uint8_t buf[1]; 449 int actlen; 450 451 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL); 452 453 switch (USB_GET_STATE(xfer)) { 454 case USB_ST_TRANSFERRED: 455 if (actlen < 1) { 456 DPRINTF("invalid actlen=0!\n"); 457 goto tr_setup; 458 } 459 pc = usbd_xfer_get_frame(xfer, 0); 460 usbd_copy_out(pc, 0, buf, 1); 461 462 if (buf[0] >= sc->sc_numser) { 463 DPRINTF("invalid serial number!\n"); 464 goto tr_setup; 465 } 466 ucom_put_data(sc->sc_ucom + buf[0], pc, 1, actlen - 1); 467 468 case USB_ST_SETUP: 469 tr_setup: 470 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 471 usbd_transfer_submit(xfer); 472 return; 473 474 default: /* Error */ 475 if (error != USB_ERR_CANCELLED) { 476 /* try to clear stall first */ 477 usbd_xfer_set_stall(xfer); 478 goto tr_setup; 479 } 480 return; 481 } 482 } 483 484 static void 485 ubser_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff) 486 { 487 struct ubser_softc *sc = ucom->sc_parent; 488 uint8_t x = ucom->sc_portno; 489 struct usb_device_request req; 490 usb_error_t err; 491 492 if (onoff) { 493 req.bmRequestType = UT_READ_VENDOR_INTERFACE; 494 req.bRequest = VENDOR_SET_BREAK; 495 req.wValue[0] = x; 496 req.wValue[1] = 0; 497 req.wIndex[0] = sc->sc_iface_no; 498 req.wIndex[1] = 0; 499 USETW(req.wLength, 0); 500 501 err = ucom_cfg_do_request(sc->sc_udev, ucom, 502 &req, NULL, 0, 1000); 503 if (err) { 504 DPRINTFN(0, "send break failed, error=%s\n", 505 usbd_errstr(err)); 506 } 507 } 508 } 509 510 static void 511 ubser_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr) 512 { 513 /* fake status bits */ 514 *lsr = 0; 515 *msr = SER_DCD; 516 } 517 518 static void 519 ubser_start_read(struct ucom_softc *ucom) 520 { 521 struct ubser_softc *sc = ucom->sc_parent; 522 523 usbd_transfer_start(sc->sc_xfer[UBSER_BULK_DT_RD]); 524 } 525 526 static void 527 ubser_stop_read(struct ucom_softc *ucom) 528 { 529 struct ubser_softc *sc = ucom->sc_parent; 530 531 usbd_transfer_stop(sc->sc_xfer[UBSER_BULK_DT_RD]); 532 } 533 534 static void 535 ubser_start_write(struct ucom_softc *ucom) 536 { 537 struct ubser_softc *sc = ucom->sc_parent; 538 539 usbd_transfer_start(sc->sc_xfer[UBSER_BULK_DT_WR]); 540 } 541 542 static void 543 ubser_stop_write(struct ucom_softc *ucom) 544 { 545 struct ubser_softc *sc = ucom->sc_parent; 546 547 usbd_transfer_stop(sc->sc_xfer[UBSER_BULK_DT_WR]); 548 } 549 550 static void 551 ubser_poll(struct ucom_softc *ucom) 552 { 553 struct ubser_softc *sc = ucom->sc_parent; 554 usbd_transfer_poll(sc->sc_xfer, UBSER_N_TRANSFER); 555 } 556