xref: /freebsd/sys/dev/usb/net/if_rue.c (revision f39bffc62c1395bde25d152c7f68fdf7cbaab414)
1 /*-
2  * Copyright (c) 2001-2003, Shunsuke Akiyama <akiyama@FreeBSD.org>.
3  * Copyright (c) 1997, 1998, 1999, 2000 Bill Paul <wpaul@ee.columbia.edu>.
4  * All rights reserved.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions
8  * are met:
9  * 1. Redistributions of source code must retain the above copyright
10  *    notice, this list of conditions and the following disclaimer.
11  * 2. Redistributions in binary form must reproduce the above copyright
12  *    notice, this list of conditions and the following disclaimer in the
13  *    documentation and/or other materials provided with the distribution.
14  *
15  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
16  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
17  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
18  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
19  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
20  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
21  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
23  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
24  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
25  * SUCH DAMAGE.
26  */
27 /*-
28  * SPDX-License-Identifier: BSD-4-Clause AND BSD-2-Clause-FreeBSD
29  *
30  * Copyright (c) 1997, 1998, 1999, 2000
31  *	Bill Paul <wpaul@ee.columbia.edu>.  All rights reserved.
32  *
33  * Redistribution and use in source and binary forms, with or without
34  * modification, are permitted provided that the following conditions
35  * are met:
36  * 1. Redistributions of source code must retain the above copyright
37  *    notice, this list of conditions and the following disclaimer.
38  * 2. Redistributions in binary form must reproduce the above copyright
39  *    notice, this list of conditions and the following disclaimer in the
40  *    documentation and/or other materials provided with the distribution.
41  * 3. All advertising materials mentioning features or use of this software
42  *    must display the following acknowledgement:
43  *	This product includes software developed by Bill Paul.
44  * 4. Neither the name of the author nor the names of any co-contributors
45  *    may be used to endorse or promote products derived from this software
46  *    without specific prior written permission.
47  *
48  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
49  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
50  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
51  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
52  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
53  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
54  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
55  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
56  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
57  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
58  * THE POSSIBILITY OF SUCH DAMAGE.
59  */
60 
61 #include <sys/cdefs.h>
62 __FBSDID("$FreeBSD$");
63 
64 /*
65  * RealTek RTL8150 USB to fast ethernet controller driver.
66  * Datasheet is available from
67  * ftp://ftp.realtek.com.tw/lancard/data_sheet/8150/.
68  */
69 
70 #include <sys/stdint.h>
71 #include <sys/stddef.h>
72 #include <sys/param.h>
73 #include <sys/queue.h>
74 #include <sys/types.h>
75 #include <sys/systm.h>
76 #include <sys/socket.h>
77 #include <sys/kernel.h>
78 #include <sys/bus.h>
79 #include <sys/module.h>
80 #include <sys/lock.h>
81 #include <sys/mutex.h>
82 #include <sys/condvar.h>
83 #include <sys/sysctl.h>
84 #include <sys/sx.h>
85 #include <sys/unistd.h>
86 #include <sys/callout.h>
87 #include <sys/malloc.h>
88 #include <sys/priv.h>
89 
90 #include <net/if.h>
91 #include <net/if_var.h>
92 
93 #include <dev/usb/usb.h>
94 #include <dev/usb/usbdi.h>
95 #include <dev/usb/usbdi_util.h>
96 #include "usbdevs.h"
97 
98 #define	USB_DEBUG_VAR rue_debug
99 #include <dev/usb/usb_debug.h>
100 #include <dev/usb/usb_process.h>
101 
102 #include <dev/usb/net/usb_ethernet.h>
103 #include <dev/usb/net/if_ruereg.h>
104 
105 #ifdef USB_DEBUG
106 static int rue_debug = 0;
107 
108 static SYSCTL_NODE(_hw_usb, OID_AUTO, rue, CTLFLAG_RW, 0, "USB rue");
109 SYSCTL_INT(_hw_usb_rue, OID_AUTO, debug, CTLFLAG_RWTUN,
110     &rue_debug, 0, "Debug level");
111 #endif
112 
113 /*
114  * Various supported device vendors/products.
115  */
116 
117 static const STRUCT_USB_HOST_ID rue_devs[] = {
118 	{USB_VPI(USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAKTX, 0)},
119 	{USB_VPI(USB_VENDOR_REALTEK, USB_PRODUCT_REALTEK_USBKR100, 0)},
120 	{USB_VPI(USB_VENDOR_OQO, USB_PRODUCT_OQO_ETHER01, 0)},
121 };
122 
123 /* prototypes */
124 
125 static device_probe_t rue_probe;
126 static device_attach_t rue_attach;
127 static device_detach_t rue_detach;
128 
129 static miibus_readreg_t rue_miibus_readreg;
130 static miibus_writereg_t rue_miibus_writereg;
131 static miibus_statchg_t rue_miibus_statchg;
132 
133 static usb_callback_t rue_intr_callback;
134 static usb_callback_t rue_bulk_read_callback;
135 static usb_callback_t rue_bulk_write_callback;
136 
137 static uether_fn_t rue_attach_post;
138 static uether_fn_t rue_init;
139 static uether_fn_t rue_stop;
140 static uether_fn_t rue_start;
141 static uether_fn_t rue_tick;
142 static uether_fn_t rue_setmulti;
143 static uether_fn_t rue_setpromisc;
144 
145 static int	rue_read_mem(struct rue_softc *, uint16_t, void *, int);
146 static int	rue_write_mem(struct rue_softc *, uint16_t, void *, int);
147 static uint8_t	rue_csr_read_1(struct rue_softc *, uint16_t);
148 static uint16_t	rue_csr_read_2(struct rue_softc *, uint16_t);
149 static int	rue_csr_write_1(struct rue_softc *, uint16_t, uint8_t);
150 static int	rue_csr_write_2(struct rue_softc *, uint16_t, uint16_t);
151 static int	rue_csr_write_4(struct rue_softc *, int, uint32_t);
152 
153 static void	rue_reset(struct rue_softc *);
154 static int	rue_ifmedia_upd(struct ifnet *);
155 static void	rue_ifmedia_sts(struct ifnet *, struct ifmediareq *);
156 
157 static const struct usb_config rue_config[RUE_N_TRANSFER] = {
158 
159 	[RUE_BULK_DT_WR] = {
160 		.type = UE_BULK,
161 		.endpoint = UE_ADDR_ANY,
162 		.direction = UE_DIR_OUT,
163 		.bufsize = MCLBYTES,
164 		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
165 		.callback = rue_bulk_write_callback,
166 		.timeout = 10000,	/* 10 seconds */
167 	},
168 
169 	[RUE_BULK_DT_RD] = {
170 		.type = UE_BULK,
171 		.endpoint = UE_ADDR_ANY,
172 		.direction = UE_DIR_IN,
173 		.bufsize = (MCLBYTES + 4),
174 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
175 		.callback = rue_bulk_read_callback,
176 		.timeout = 0,	/* no timeout */
177 	},
178 
179 	[RUE_INTR_DT_RD] = {
180 		.type = UE_INTERRUPT,
181 		.endpoint = UE_ADDR_ANY,
182 		.direction = UE_DIR_IN,
183 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
184 		.bufsize = 0,	/* use wMaxPacketSize */
185 		.callback = rue_intr_callback,
186 	},
187 };
188 
189 static device_method_t rue_methods[] = {
190 	/* Device interface */
191 	DEVMETHOD(device_probe, rue_probe),
192 	DEVMETHOD(device_attach, rue_attach),
193 	DEVMETHOD(device_detach, rue_detach),
194 
195 	/* MII interface */
196 	DEVMETHOD(miibus_readreg, rue_miibus_readreg),
197 	DEVMETHOD(miibus_writereg, rue_miibus_writereg),
198 	DEVMETHOD(miibus_statchg, rue_miibus_statchg),
199 
200 	DEVMETHOD_END
201 };
202 
203 static driver_t rue_driver = {
204 	.name = "rue",
205 	.methods = rue_methods,
206 	.size = sizeof(struct rue_softc),
207 };
208 
209 static devclass_t rue_devclass;
210 
211 DRIVER_MODULE_ORDERED(rue, uhub, rue_driver, rue_devclass, NULL, NULL,
212     SI_ORDER_ANY);
213 DRIVER_MODULE(miibus, rue, miibus_driver, miibus_devclass, NULL, NULL);
214 MODULE_DEPEND(rue, uether, 1, 1, 1);
215 MODULE_DEPEND(rue, usb, 1, 1, 1);
216 MODULE_DEPEND(rue, ether, 1, 1, 1);
217 MODULE_DEPEND(rue, miibus, 1, 1, 1);
218 MODULE_VERSION(rue, 1);
219 USB_PNP_HOST_INFO(rue_devs);
220 
221 static const struct usb_ether_methods rue_ue_methods = {
222 	.ue_attach_post = rue_attach_post,
223 	.ue_start = rue_start,
224 	.ue_init = rue_init,
225 	.ue_stop = rue_stop,
226 	.ue_tick = rue_tick,
227 	.ue_setmulti = rue_setmulti,
228 	.ue_setpromisc = rue_setpromisc,
229 	.ue_mii_upd = rue_ifmedia_upd,
230 	.ue_mii_sts = rue_ifmedia_sts,
231 };
232 
233 #define	RUE_SETBIT(sc, reg, x) \
234 	rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) | (x))
235 
236 #define	RUE_CLRBIT(sc, reg, x) \
237 	rue_csr_write_1(sc, reg, rue_csr_read_1(sc, reg) & ~(x))
238 
239 static int
240 rue_read_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
241 {
242 	struct usb_device_request req;
243 
244 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
245 	req.bRequest = UR_SET_ADDRESS;
246 	USETW(req.wValue, addr);
247 	USETW(req.wIndex, 0);
248 	USETW(req.wLength, len);
249 
250 	return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
251 }
252 
253 static int
254 rue_write_mem(struct rue_softc *sc, uint16_t addr, void *buf, int len)
255 {
256 	struct usb_device_request req;
257 
258 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
259 	req.bRequest = UR_SET_ADDRESS;
260 	USETW(req.wValue, addr);
261 	USETW(req.wIndex, 0);
262 	USETW(req.wLength, len);
263 
264 	return (uether_do_request(&sc->sc_ue, &req, buf, 1000));
265 }
266 
267 static uint8_t
268 rue_csr_read_1(struct rue_softc *sc, uint16_t reg)
269 {
270 	uint8_t val;
271 
272 	rue_read_mem(sc, reg, &val, 1);
273 	return (val);
274 }
275 
276 static uint16_t
277 rue_csr_read_2(struct rue_softc *sc, uint16_t reg)
278 {
279 	uint8_t val[2];
280 
281 	rue_read_mem(sc, reg, &val, 2);
282 	return (UGETW(val));
283 }
284 
285 static int
286 rue_csr_write_1(struct rue_softc *sc, uint16_t reg, uint8_t val)
287 {
288 	return (rue_write_mem(sc, reg, &val, 1));
289 }
290 
291 static int
292 rue_csr_write_2(struct rue_softc *sc, uint16_t reg, uint16_t val)
293 {
294 	uint8_t temp[2];
295 
296 	USETW(temp, val);
297 	return (rue_write_mem(sc, reg, &temp, 2));
298 }
299 
300 static int
301 rue_csr_write_4(struct rue_softc *sc, int reg, uint32_t val)
302 {
303 	uint8_t temp[4];
304 
305 	USETDW(temp, val);
306 	return (rue_write_mem(sc, reg, &temp, 4));
307 }
308 
309 static int
310 rue_miibus_readreg(device_t dev, int phy, int reg)
311 {
312 	struct rue_softc *sc = device_get_softc(dev);
313 	uint16_t rval;
314 	uint16_t ruereg;
315 	int locked;
316 
317 	if (phy != 0)		/* RTL8150 supports PHY == 0, only */
318 		return (0);
319 
320 	locked = mtx_owned(&sc->sc_mtx);
321 	if (!locked)
322 		RUE_LOCK(sc);
323 
324 	switch (reg) {
325 	case MII_BMCR:
326 		ruereg = RUE_BMCR;
327 		break;
328 	case MII_BMSR:
329 		ruereg = RUE_BMSR;
330 		break;
331 	case MII_ANAR:
332 		ruereg = RUE_ANAR;
333 		break;
334 	case MII_ANER:
335 		ruereg = RUE_AER;
336 		break;
337 	case MII_ANLPAR:
338 		ruereg = RUE_ANLP;
339 		break;
340 	case MII_PHYIDR1:
341 	case MII_PHYIDR2:
342 		rval = 0;
343 		goto done;
344 	default:
345 		if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
346 			rval = rue_csr_read_1(sc, reg);
347 			goto done;
348 		}
349 		device_printf(sc->sc_ue.ue_dev, "bad phy register\n");
350 		rval = 0;
351 		goto done;
352 	}
353 
354 	rval = rue_csr_read_2(sc, ruereg);
355 done:
356 	if (!locked)
357 		RUE_UNLOCK(sc);
358 	return (rval);
359 }
360 
361 static int
362 rue_miibus_writereg(device_t dev, int phy, int reg, int data)
363 {
364 	struct rue_softc *sc = device_get_softc(dev);
365 	uint16_t ruereg;
366 	int locked;
367 
368 	if (phy != 0)		/* RTL8150 supports PHY == 0, only */
369 		return (0);
370 
371 	locked = mtx_owned(&sc->sc_mtx);
372 	if (!locked)
373 		RUE_LOCK(sc);
374 
375 	switch (reg) {
376 	case MII_BMCR:
377 		ruereg = RUE_BMCR;
378 		break;
379 	case MII_BMSR:
380 		ruereg = RUE_BMSR;
381 		break;
382 	case MII_ANAR:
383 		ruereg = RUE_ANAR;
384 		break;
385 	case MII_ANER:
386 		ruereg = RUE_AER;
387 		break;
388 	case MII_ANLPAR:
389 		ruereg = RUE_ANLP;
390 		break;
391 	case MII_PHYIDR1:
392 	case MII_PHYIDR2:
393 		goto done;
394 	default:
395 		if (RUE_REG_MIN <= reg && reg <= RUE_REG_MAX) {
396 			rue_csr_write_1(sc, reg, data);
397 			goto done;
398 		}
399 		device_printf(sc->sc_ue.ue_dev, " bad phy register\n");
400 		goto done;
401 	}
402 	rue_csr_write_2(sc, ruereg, data);
403 done:
404 	if (!locked)
405 		RUE_UNLOCK(sc);
406 	return (0);
407 }
408 
409 static void
410 rue_miibus_statchg(device_t dev)
411 {
412 	/*
413 	 * When the code below is enabled the card starts doing weird
414 	 * things after link going from UP to DOWN and back UP.
415 	 *
416 	 * Looks like some of register writes below messes up PHY
417 	 * interface.
418 	 *
419 	 * No visible regressions were found after commenting this code
420 	 * out, so that disable it for good.
421 	 */
422 #if 0
423 	struct rue_softc *sc = device_get_softc(dev);
424 	struct mii_data *mii = GET_MII(sc);
425 	uint16_t bmcr;
426 	int locked;
427 
428 	locked = mtx_owned(&sc->sc_mtx);
429 	if (!locked)
430 		RUE_LOCK(sc);
431 
432 	RUE_CLRBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
433 
434 	bmcr = rue_csr_read_2(sc, RUE_BMCR);
435 
436 	if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX)
437 		bmcr |= RUE_BMCR_SPD_SET;
438 	else
439 		bmcr &= ~RUE_BMCR_SPD_SET;
440 
441 	if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
442 		bmcr |= RUE_BMCR_DUPLEX;
443 	else
444 		bmcr &= ~RUE_BMCR_DUPLEX;
445 
446 	rue_csr_write_2(sc, RUE_BMCR, bmcr);
447 
448 	RUE_SETBIT(sc, RUE_CR, (RUE_CR_RE | RUE_CR_TE));
449 
450 	if (!locked)
451 		RUE_UNLOCK(sc);
452 #endif
453 }
454 
455 static void
456 rue_setpromisc(struct usb_ether *ue)
457 {
458 	struct rue_softc *sc = uether_getsc(ue);
459 	struct ifnet *ifp = uether_getifp(ue);
460 
461 	RUE_LOCK_ASSERT(sc, MA_OWNED);
462 
463 	/* If we want promiscuous mode, set the allframes bit. */
464 	if (ifp->if_flags & IFF_PROMISC)
465 		RUE_SETBIT(sc, RUE_RCR, RUE_RCR_AAP);
466 	else
467 		RUE_CLRBIT(sc, RUE_RCR, RUE_RCR_AAP);
468 }
469 
470 /*
471  * Program the 64-bit multicast hash filter.
472  */
473 static void
474 rue_setmulti(struct usb_ether *ue)
475 {
476 	struct rue_softc *sc = uether_getsc(ue);
477 	struct ifnet *ifp = uether_getifp(ue);
478 	uint16_t rxcfg;
479 	int h = 0;
480 	uint32_t hashes[2] = { 0, 0 };
481 	struct ifmultiaddr *ifma;
482 	int mcnt = 0;
483 
484 	RUE_LOCK_ASSERT(sc, MA_OWNED);
485 
486 	rxcfg = rue_csr_read_2(sc, RUE_RCR);
487 
488 	if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
489 		rxcfg |= (RUE_RCR_AAM | RUE_RCR_AAP);
490 		rxcfg &= ~RUE_RCR_AM;
491 		rue_csr_write_2(sc, RUE_RCR, rxcfg);
492 		rue_csr_write_4(sc, RUE_MAR0, 0xFFFFFFFF);
493 		rue_csr_write_4(sc, RUE_MAR4, 0xFFFFFFFF);
494 		return;
495 	}
496 
497 	/* first, zot all the existing hash bits */
498 	rue_csr_write_4(sc, RUE_MAR0, 0);
499 	rue_csr_write_4(sc, RUE_MAR4, 0);
500 
501 	/* now program new ones */
502 	if_maddr_rlock(ifp);
503 	CK_STAILQ_FOREACH (ifma, &ifp->if_multiaddrs, ifma_link)
504 	{
505 		if (ifma->ifma_addr->sa_family != AF_LINK)
506 			continue;
507 		h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
508 		    ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
509 		if (h < 32)
510 			hashes[0] |= (1 << h);
511 		else
512 			hashes[1] |= (1 << (h - 32));
513 		mcnt++;
514 	}
515 	if_maddr_runlock(ifp);
516 
517 	if (mcnt)
518 		rxcfg |= RUE_RCR_AM;
519 	else
520 		rxcfg &= ~RUE_RCR_AM;
521 
522 	rxcfg &= ~(RUE_RCR_AAM | RUE_RCR_AAP);
523 
524 	rue_csr_write_2(sc, RUE_RCR, rxcfg);
525 	rue_csr_write_4(sc, RUE_MAR0, hashes[0]);
526 	rue_csr_write_4(sc, RUE_MAR4, hashes[1]);
527 }
528 
529 static void
530 rue_reset(struct rue_softc *sc)
531 {
532 	int i;
533 
534 	rue_csr_write_1(sc, RUE_CR, RUE_CR_SOFT_RST);
535 
536 	for (i = 0; i != RUE_TIMEOUT; i++) {
537 		if (uether_pause(&sc->sc_ue, hz / 1000))
538 			break;
539 		if (!(rue_csr_read_1(sc, RUE_CR) & RUE_CR_SOFT_RST))
540 			break;
541 	}
542 	if (i == RUE_TIMEOUT)
543 		device_printf(sc->sc_ue.ue_dev, "reset never completed\n");
544 
545 	uether_pause(&sc->sc_ue, hz / 100);
546 }
547 
548 static void
549 rue_attach_post(struct usb_ether *ue)
550 {
551 	struct rue_softc *sc = uether_getsc(ue);
552 
553 	/* reset the adapter */
554 	rue_reset(sc);
555 
556 	/* get station address from the EEPROM */
557 	rue_read_mem(sc, RUE_EEPROM_IDR0, ue->ue_eaddr, ETHER_ADDR_LEN);
558 }
559 
560 /*
561  * Probe for a RTL8150 chip.
562  */
563 static int
564 rue_probe(device_t dev)
565 {
566 	struct usb_attach_arg *uaa = device_get_ivars(dev);
567 
568 	if (uaa->usb_mode != USB_MODE_HOST)
569 		return (ENXIO);
570 	if (uaa->info.bConfigIndex != RUE_CONFIG_IDX)
571 		return (ENXIO);
572 	if (uaa->info.bIfaceIndex != RUE_IFACE_IDX)
573 		return (ENXIO);
574 
575 	return (usbd_lookup_id_by_uaa(rue_devs, sizeof(rue_devs), uaa));
576 }
577 
578 /*
579  * Attach the interface. Allocate softc structures, do ifmedia
580  * setup and ethernet/BPF attach.
581  */
582 static int
583 rue_attach(device_t dev)
584 {
585 	struct usb_attach_arg *uaa = device_get_ivars(dev);
586 	struct rue_softc *sc = device_get_softc(dev);
587 	struct usb_ether *ue = &sc->sc_ue;
588 	uint8_t iface_index;
589 	int error;
590 
591 	device_set_usb_desc(dev);
592 	mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
593 
594 	iface_index = RUE_IFACE_IDX;
595 	error = usbd_transfer_setup(uaa->device, &iface_index,
596 	    sc->sc_xfer, rue_config, RUE_N_TRANSFER,
597 	    sc, &sc->sc_mtx);
598 	if (error) {
599 		device_printf(dev, "allocating USB transfers failed\n");
600 		goto detach;
601 	}
602 
603 	ue->ue_sc = sc;
604 	ue->ue_dev = dev;
605 	ue->ue_udev = uaa->device;
606 	ue->ue_mtx = &sc->sc_mtx;
607 	ue->ue_methods = &rue_ue_methods;
608 
609 	error = uether_ifattach(ue);
610 	if (error) {
611 		device_printf(dev, "could not attach interface\n");
612 		goto detach;
613 	}
614 	return (0);			/* success */
615 
616 detach:
617 	rue_detach(dev);
618 	return (ENXIO);			/* failure */
619 }
620 
621 static int
622 rue_detach(device_t dev)
623 {
624 	struct rue_softc *sc = device_get_softc(dev);
625 	struct usb_ether *ue = &sc->sc_ue;
626 
627 	usbd_transfer_unsetup(sc->sc_xfer, RUE_N_TRANSFER);
628 	uether_ifdetach(ue);
629 	mtx_destroy(&sc->sc_mtx);
630 
631 	return (0);
632 }
633 
634 static void
635 rue_intr_callback(struct usb_xfer *xfer, usb_error_t error)
636 {
637 	struct rue_softc *sc = usbd_xfer_softc(xfer);
638 	struct ifnet *ifp = uether_getifp(&sc->sc_ue);
639 	struct rue_intrpkt pkt;
640 	struct usb_page_cache *pc;
641 	int actlen;
642 
643 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
644 
645 	switch (USB_GET_STATE(xfer)) {
646 	case USB_ST_TRANSFERRED:
647 
648 		if (ifp && (ifp->if_drv_flags & IFF_DRV_RUNNING) &&
649 		    actlen >= (int)sizeof(pkt)) {
650 
651 			pc = usbd_xfer_get_frame(xfer, 0);
652 			usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
653 
654 			if_inc_counter(ifp, IFCOUNTER_IERRORS, pkt.rue_rxlost_cnt);
655 			if_inc_counter(ifp, IFCOUNTER_IERRORS, pkt.rue_crcerr_cnt);
656 			if_inc_counter(ifp, IFCOUNTER_COLLISIONS, pkt.rue_col_cnt);
657 		}
658 		/* FALLTHROUGH */
659 	case USB_ST_SETUP:
660 tr_setup:
661 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
662 		usbd_transfer_submit(xfer);
663 		return;
664 
665 	default:			/* Error */
666 		if (error != USB_ERR_CANCELLED) {
667 			/* try to clear stall first */
668 			usbd_xfer_set_stall(xfer);
669 			goto tr_setup;
670 		}
671 		return;
672 	}
673 }
674 
675 static void
676 rue_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
677 {
678 	struct rue_softc *sc = usbd_xfer_softc(xfer);
679 	struct usb_ether *ue = &sc->sc_ue;
680 	struct ifnet *ifp = uether_getifp(ue);
681 	struct usb_page_cache *pc;
682 	uint16_t status;
683 	int actlen;
684 
685 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
686 
687 	switch (USB_GET_STATE(xfer)) {
688 	case USB_ST_TRANSFERRED:
689 
690 		if (actlen < 4) {
691 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
692 			goto tr_setup;
693 		}
694 		pc = usbd_xfer_get_frame(xfer, 0);
695 		usbd_copy_out(pc, actlen - 4, &status, sizeof(status));
696 		actlen -= 4;
697 
698 		/* check receive packet was valid or not */
699 		status = le16toh(status);
700 		if ((status & RUE_RXSTAT_VALID) == 0) {
701 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
702 			goto tr_setup;
703 		}
704 		uether_rxbuf(ue, pc, 0, actlen);
705 		/* FALLTHROUGH */
706 	case USB_ST_SETUP:
707 tr_setup:
708 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
709 		usbd_transfer_submit(xfer);
710 		uether_rxflush(ue);
711 		return;
712 
713 	default:			/* Error */
714 		DPRINTF("bulk read error, %s\n",
715 		    usbd_errstr(error));
716 
717 		if (error != USB_ERR_CANCELLED) {
718 			/* try to clear stall first */
719 			usbd_xfer_set_stall(xfer);
720 			goto tr_setup;
721 		}
722 		return;
723 	}
724 }
725 
726 static void
727 rue_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
728 {
729 	struct rue_softc *sc = usbd_xfer_softc(xfer);
730 	struct ifnet *ifp = uether_getifp(&sc->sc_ue);
731 	struct usb_page_cache *pc;
732 	struct mbuf *m;
733 	int temp_len;
734 
735 	switch (USB_GET_STATE(xfer)) {
736 	case USB_ST_TRANSFERRED:
737 		DPRINTFN(11, "transfer complete\n");
738 		if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
739 
740 		/* FALLTHROUGH */
741 	case USB_ST_SETUP:
742 tr_setup:
743 		if ((sc->sc_flags & RUE_FLAG_LINK) == 0) {
744 			/*
745 			 * don't send anything if there is no link !
746 			 */
747 			return;
748 		}
749 		IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
750 
751 		if (m == NULL)
752 			return;
753 		if (m->m_pkthdr.len > MCLBYTES)
754 			m->m_pkthdr.len = MCLBYTES;
755 		temp_len = m->m_pkthdr.len;
756 
757 		pc = usbd_xfer_get_frame(xfer, 0);
758 		usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
759 
760 		/*
761 		 * This is an undocumented behavior.
762 		 * RTL8150 chip doesn't send frame length smaller than
763 		 * RUE_MIN_FRAMELEN (60) byte packet.
764 		 */
765 		if (temp_len < RUE_MIN_FRAMELEN) {
766 			usbd_frame_zero(pc, temp_len,
767 			    RUE_MIN_FRAMELEN - temp_len);
768 			temp_len = RUE_MIN_FRAMELEN;
769 		}
770 		usbd_xfer_set_frame_len(xfer, 0, temp_len);
771 
772 		/*
773 		 * if there's a BPF listener, bounce a copy
774 		 * of this frame to him:
775 		 */
776 		BPF_MTAP(ifp, m);
777 
778 		m_freem(m);
779 
780 		usbd_transfer_submit(xfer);
781 
782 		return;
783 
784 	default:			/* Error */
785 		DPRINTFN(11, "transfer error, %s\n",
786 		    usbd_errstr(error));
787 
788 		if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
789 
790 		if (error != USB_ERR_CANCELLED) {
791 			/* try to clear stall first */
792 			usbd_xfer_set_stall(xfer);
793 			goto tr_setup;
794 		}
795 		return;
796 	}
797 }
798 
799 static void
800 rue_tick(struct usb_ether *ue)
801 {
802 	struct rue_softc *sc = uether_getsc(ue);
803 	struct mii_data *mii = GET_MII(sc);
804 
805 	RUE_LOCK_ASSERT(sc, MA_OWNED);
806 
807 	mii_tick(mii);
808 	if ((sc->sc_flags & RUE_FLAG_LINK) == 0
809 	    && mii->mii_media_status & IFM_ACTIVE &&
810 	    IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
811 		sc->sc_flags |= RUE_FLAG_LINK;
812 		rue_start(ue);
813 	}
814 }
815 
816 static void
817 rue_start(struct usb_ether *ue)
818 {
819 	struct rue_softc *sc = uether_getsc(ue);
820 
821 	/*
822 	 * start the USB transfers, if not already started:
823 	 */
824 	usbd_transfer_start(sc->sc_xfer[RUE_INTR_DT_RD]);
825 	usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_RD]);
826 	usbd_transfer_start(sc->sc_xfer[RUE_BULK_DT_WR]);
827 }
828 
829 static void
830 rue_init(struct usb_ether *ue)
831 {
832 	struct rue_softc *sc = uether_getsc(ue);
833 	struct ifnet *ifp = uether_getifp(ue);
834 
835 	RUE_LOCK_ASSERT(sc, MA_OWNED);
836 
837 	/*
838 	 * Cancel pending I/O
839 	 */
840 	rue_reset(sc);
841 
842 	/* Set MAC address */
843 	rue_write_mem(sc, RUE_IDR0, IF_LLADDR(ifp), ETHER_ADDR_LEN);
844 
845 	rue_stop(ue);
846 
847 	/*
848 	 * Set the initial TX and RX configuration.
849 	 */
850 	rue_csr_write_1(sc, RUE_TCR, RUE_TCR_CONFIG);
851 	rue_csr_write_2(sc, RUE_RCR, RUE_RCR_CONFIG|RUE_RCR_AB);
852 
853 	/* Load the multicast filter */
854 	rue_setpromisc(ue);
855 	/* Load the multicast filter. */
856 	rue_setmulti(ue);
857 
858 	/* Enable RX and TX */
859 	rue_csr_write_1(sc, RUE_CR, (RUE_CR_TE | RUE_CR_RE | RUE_CR_EP3CLREN));
860 
861 	usbd_xfer_set_stall(sc->sc_xfer[RUE_BULK_DT_WR]);
862 
863 	ifp->if_drv_flags |= IFF_DRV_RUNNING;
864 	rue_start(ue);
865 }
866 
867 /*
868  * Set media options.
869  */
870 static int
871 rue_ifmedia_upd(struct ifnet *ifp)
872 {
873 	struct rue_softc *sc = ifp->if_softc;
874 	struct mii_data *mii = GET_MII(sc);
875 	struct mii_softc *miisc;
876 	int error;
877 
878 	RUE_LOCK_ASSERT(sc, MA_OWNED);
879 
880         sc->sc_flags &= ~RUE_FLAG_LINK;
881 	LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
882 		PHY_RESET(miisc);
883 	error = mii_mediachg(mii);
884 	return (error);
885 }
886 
887 /*
888  * Report current media status.
889  */
890 static void
891 rue_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
892 {
893 	struct rue_softc *sc = ifp->if_softc;
894 	struct mii_data *mii = GET_MII(sc);
895 
896 	RUE_LOCK(sc);
897 	mii_pollstat(mii);
898 	ifmr->ifm_active = mii->mii_media_active;
899 	ifmr->ifm_status = mii->mii_media_status;
900 	RUE_UNLOCK(sc);
901 }
902 
903 static void
904 rue_stop(struct usb_ether *ue)
905 {
906 	struct rue_softc *sc = uether_getsc(ue);
907 	struct ifnet *ifp = uether_getifp(ue);
908 
909 	RUE_LOCK_ASSERT(sc, MA_OWNED);
910 
911 	ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
912 	sc->sc_flags &= ~RUE_FLAG_LINK;
913 
914 	/*
915 	 * stop all the transfers, if not already stopped:
916 	 */
917 	usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_WR]);
918 	usbd_transfer_stop(sc->sc_xfer[RUE_BULK_DT_RD]);
919 	usbd_transfer_stop(sc->sc_xfer[RUE_INTR_DT_RD]);
920 
921 	rue_csr_write_1(sc, RUE_CR, 0x00);
922 
923 	rue_reset(sc);
924 }
925