xref: /freebsd/sys/dev/usb/net/if_mos.c (revision 643ac419fafba89f5adda0e0ea75b538727453fb)
1 /*-
2  * SPDX-License-Identifier: (BSD-1-Clause AND BSD-4-Clause)
3  *
4  * Copyright (c) 2011 Rick van der Zwet <info@rickvanderzwet.nl>
5  *
6  * Permission to use, copy, modify, and distribute this software for any
7  * purpose with or without fee is hereby granted, provided that the above
8  * copyright notice and this permission notice appear in all copies.
9  *
10  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
11  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
12  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
13  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
14  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
15  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
16  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
17  */
18 
19 /*-
20  * Copyright (c) 2008 Johann Christian Rode <jcrode@gmx.net>
21  *
22  * Permission to use, copy, modify, and distribute this software for any
23  * purpose with or without fee is hereby granted, provided that the above
24  * copyright notice and this permission notice appear in all copies.
25  *
26  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
27  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
28  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
29  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
30  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
31  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
32  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
33  */
34 
35 /*-
36  * Copyright (c) 2005, 2006, 2007 Jonathan Gray <jsg@openbsd.org>
37  *
38  * Permission to use, copy, modify, and distribute this software for any
39  * purpose with or without fee is hereby granted, provided that the above
40  * copyright notice and this permission notice appear in all copies.
41  *
42  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
43  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
44  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
45  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
46  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
47  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
48  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
49  */
50 
51 /*-
52  * Copyright (c) 1997, 1998, 1999, 2000-2003
53  *	Bill Paul <wpaul@windriver.com>.  All rights reserved.
54  *
55  * Redistribution and use in source and binary forms, with or without
56  * modification, are permitted provided that the following conditions
57  * are met:
58  * 1. Redistributions of source code must retain the above copyright
59  *    notice, this list of conditions and the following disclaimer.
60  * 2. Redistributions in binary form must reproduce the above copyright
61  *    notice, this list of conditions and the following disclaimer in the
62  *    documentation and/or other materials provided with the distribution.
63  * 3. All advertising materials mentioning features or use of this software
64  *    must display the following acknowledgement:
65  *	This product includes software developed by Bill Paul.
66  * 4. Neither the name of the author nor the names of any co-contributors
67  *    may be used to endorse or promote products derived from this software
68  *    without specific prior written permission.
69  *
70  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
71  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
72  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
73  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
74  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
75  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
76  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
77  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
78  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
79  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
80  * THE POSSIBILITY OF SUCH DAMAGE.
81  */
82 
83 #include <sys/cdefs.h>
84 __FBSDID("$FreeBSD$");
85 
86 /*
87  * Moschip MCS7730/MCS7830/MCS7832 USB to Ethernet controller
88  * The datasheet is available at the following URL:
89  * http://www.moschip.com/data/products/MCS7830/Data%20Sheet_7830.pdf
90  */
91 
92 /*
93  * The FreeBSD if_mos.c driver is based on various different sources:
94  * The vendor provided driver at the following URL:
95  * http://www.moschip.com/data/products/MCS7830/Driver_FreeBSD_7830.tar.gz
96  *
97  * Mixed together with the OpenBSD if_mos.c driver for validation and checking
98  * and the FreeBSD if_reu.c as reference for the USB Ethernet framework.
99  */
100 
101 #include <sys/stdint.h>
102 #include <sys/stddef.h>
103 #include <sys/param.h>
104 #include <sys/queue.h>
105 #include <sys/types.h>
106 #include <sys/systm.h>
107 #include <sys/socket.h>
108 #include <sys/kernel.h>
109 #include <sys/bus.h>
110 #include <sys/module.h>
111 #include <sys/lock.h>
112 #include <sys/mutex.h>
113 #include <sys/condvar.h>
114 #include <sys/sysctl.h>
115 #include <sys/sx.h>
116 #include <sys/unistd.h>
117 #include <sys/callout.h>
118 #include <sys/malloc.h>
119 #include <sys/priv.h>
120 
121 #include <net/if.h>
122 #include <net/if_var.h>
123 #include <net/if_media.h>
124 
125 #include <dev/mii/mii.h>
126 #include <dev/mii/miivar.h>
127 
128 #include <dev/usb/usb.h>
129 #include <dev/usb/usbdi.h>
130 #include <dev/usb/usbdi_util.h>
131 #include "usbdevs.h"
132 
133 #define	USB_DEBUG_VAR mos_debug
134 #include <dev/usb/usb_debug.h>
135 #include <dev/usb/usb_process.h>
136 
137 #include <dev/usb/net/usb_ethernet.h>
138 
139 #include "miibus_if.h"
140 
141 //#include <dev/usb/net/if_mosreg.h>
142 #include "if_mosreg.h"
143 
144 #ifdef USB_DEBUG
145 static int mos_debug = 0;
146 
147 static SYSCTL_NODE(_hw_usb, OID_AUTO, mos, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
148     "USB mos");
149 SYSCTL_INT(_hw_usb_mos, OID_AUTO, debug, CTLFLAG_RWTUN, &mos_debug, 0,
150     "Debug level");
151 #endif
152 
153 #define MOS_DPRINTFN(fmt,...) \
154   DPRINTF("mos: %s: " fmt "\n",__FUNCTION__,## __VA_ARGS__)
155 
156 #define	USB_PRODUCT_MOSCHIP_MCS7730	0x7730
157 #define	USB_PRODUCT_SITECOMEU_LN030	0x0021
158 
159 /* Various supported device vendors/products. */
160 static const STRUCT_USB_HOST_ID mos_devs[] = {
161 	{USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7730, MCS7730)},
162 	{USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7830, MCS7830)},
163 	{USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7832, MCS7832)},
164 	{USB_VPI(USB_VENDOR_SITECOMEU, USB_PRODUCT_SITECOMEU_LN030, MCS7830)},
165 };
166 
167 static int mos_probe(device_t dev);
168 static int mos_attach(device_t dev);
169 static void mos_attach_post(struct usb_ether *ue);
170 static int mos_detach(device_t dev);
171 
172 static void mos_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error);
173 static void mos_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error);
174 static void mos_intr_callback(struct usb_xfer *xfer, usb_error_t error);
175 static void mos_tick(struct usb_ether *);
176 static void mos_start(struct usb_ether *);
177 static void mos_init(struct usb_ether *);
178 static void mos_chip_init(struct mos_softc *);
179 static void mos_stop(struct usb_ether *);
180 static int mos_miibus_readreg(device_t, int, int);
181 static int mos_miibus_writereg(device_t, int, int, int);
182 static void mos_miibus_statchg(device_t);
183 static int mos_ifmedia_upd(struct ifnet *);
184 static void mos_ifmedia_sts(struct ifnet *, struct ifmediareq *);
185 static void mos_reset(struct mos_softc *sc);
186 
187 static int mos_reg_read_1(struct mos_softc *, int);
188 static int mos_reg_read_2(struct mos_softc *, int);
189 static int mos_reg_write_1(struct mos_softc *, int, int);
190 static int mos_reg_write_2(struct mos_softc *, int, int);
191 static int mos_readmac(struct mos_softc *, uint8_t *);
192 static int mos_writemac(struct mos_softc *, uint8_t *);
193 static int mos_write_mcast(struct mos_softc *, u_char *);
194 
195 static void mos_setmulti(struct usb_ether *);
196 static void mos_setpromisc(struct usb_ether *);
197 
198 static const struct usb_config mos_config[MOS_ENDPT_MAX] = {
199 	[MOS_ENDPT_TX] = {
200 		.type = UE_BULK,
201 		.endpoint = UE_ADDR_ANY,
202 		.direction = UE_DIR_OUT,
203 		.bufsize = (MCLBYTES + 2),
204 		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
205 		.callback = mos_bulk_write_callback,
206 		.timeout = 10000,
207 	},
208 
209 	[MOS_ENDPT_RX] = {
210 		.type = UE_BULK,
211 		.endpoint = UE_ADDR_ANY,
212 		.direction = UE_DIR_IN,
213 		.bufsize = (MCLBYTES + 4 + ETHER_CRC_LEN),
214 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
215 		.callback = mos_bulk_read_callback,
216 	},
217 
218 	[MOS_ENDPT_INTR] = {
219 		.type = UE_INTERRUPT,
220 		.endpoint = UE_ADDR_ANY,
221 		.direction = UE_DIR_IN,
222 		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
223 		.bufsize = 0,
224 		.callback = mos_intr_callback,
225 	},
226 };
227 
228 static device_method_t mos_methods[] = {
229 	/* Device interface */
230 	DEVMETHOD(device_probe, mos_probe),
231 	DEVMETHOD(device_attach, mos_attach),
232 	DEVMETHOD(device_detach, mos_detach),
233 
234 	/* MII interface */
235 	DEVMETHOD(miibus_readreg, mos_miibus_readreg),
236 	DEVMETHOD(miibus_writereg, mos_miibus_writereg),
237 	DEVMETHOD(miibus_statchg, mos_miibus_statchg),
238 
239 	DEVMETHOD_END
240 };
241 
242 static driver_t mos_driver = {
243 	.name = "mos",
244 	.methods = mos_methods,
245 	.size = sizeof(struct mos_softc)
246 };
247 
248 DRIVER_MODULE(mos, uhub, mos_driver, NULL, NULL);
249 DRIVER_MODULE(miibus, mos, miibus_driver, 0, 0);
250 MODULE_DEPEND(mos, uether, 1, 1, 1);
251 MODULE_DEPEND(mos, usb, 1, 1, 1);
252 MODULE_DEPEND(mos, ether, 1, 1, 1);
253 MODULE_DEPEND(mos, miibus, 1, 1, 1);
254 USB_PNP_HOST_INFO(mos_devs);
255 
256 static const struct usb_ether_methods mos_ue_methods = {
257 	.ue_attach_post = mos_attach_post,
258 	.ue_start = mos_start,
259 	.ue_init = mos_init,
260 	.ue_stop = mos_stop,
261 	.ue_tick = mos_tick,
262 	.ue_setmulti = mos_setmulti,
263 	.ue_setpromisc = mos_setpromisc,
264 	.ue_mii_upd = mos_ifmedia_upd,
265 	.ue_mii_sts = mos_ifmedia_sts,
266 };
267 
268 static int
269 mos_reg_read_1(struct mos_softc *sc, int reg)
270 {
271 	struct usb_device_request req;
272 	usb_error_t err;
273 	uByte val = 0;
274 
275 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
276 	req.bRequest = MOS_UR_READREG;
277 	USETW(req.wValue, 0);
278 	USETW(req.wIndex, reg);
279 	USETW(req.wLength, 1);
280 
281 	err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
282 
283 	if (err) {
284 		MOS_DPRINTFN("mos_reg_read_1 error, reg: %d\n", reg);
285 		return (-1);
286 	}
287 	return (val);
288 }
289 
290 static int
291 mos_reg_read_2(struct mos_softc *sc, int reg)
292 {
293 	struct usb_device_request req;
294 	usb_error_t err;
295 	uWord val;
296 
297 	USETW(val, 0);
298 
299 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
300 	req.bRequest = MOS_UR_READREG;
301 	USETW(req.wValue, 0);
302 	USETW(req.wIndex, reg);
303 	USETW(req.wLength, 2);
304 
305 	err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
306 
307 	if (err) {
308 		MOS_DPRINTFN("mos_reg_read_2 error, reg: %d", reg);
309 		return (-1);
310 	}
311 	return (UGETW(val));
312 }
313 
314 static int
315 mos_reg_write_1(struct mos_softc *sc, int reg, int aval)
316 {
317 	struct usb_device_request req;
318 	usb_error_t err;
319 	uByte val;
320 	val = aval;
321 
322 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
323 	req.bRequest = MOS_UR_WRITEREG;
324 	USETW(req.wValue, 0);
325 	USETW(req.wIndex, reg);
326 	USETW(req.wLength, 1);
327 
328 	err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
329 
330 	if (err) {
331 		MOS_DPRINTFN("mos_reg_write_1 error, reg: %d", reg);
332 		return (-1);
333 	}
334 	return (0);
335 }
336 
337 static int
338 mos_reg_write_2(struct mos_softc *sc, int reg, int aval)
339 {
340 	struct usb_device_request req;
341 	usb_error_t err;
342 	uWord val;
343 
344 	USETW(val, aval);
345 
346 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
347 	req.bRequest = MOS_UR_WRITEREG;
348 	USETW(req.wValue, 0);
349 	USETW(req.wIndex, reg);
350 	USETW(req.wLength, 2);
351 
352 	err = uether_do_request(&sc->sc_ue, &req, &val, 1000);
353 
354 	if (err) {
355 		MOS_DPRINTFN("mos_reg_write_2 error, reg: %d", reg);
356 		return (-1);
357 	}
358 	return (0);
359 }
360 
361 static int
362 mos_readmac(struct mos_softc *sc, u_char *mac)
363 {
364 	struct usb_device_request req;
365 	usb_error_t err;
366 
367 	req.bmRequestType = UT_READ_VENDOR_DEVICE;
368 	req.bRequest = MOS_UR_READREG;
369 	USETW(req.wValue, 0);
370 	USETW(req.wIndex, MOS_MAC);
371 	USETW(req.wLength, ETHER_ADDR_LEN);
372 
373 	err = uether_do_request(&sc->sc_ue, &req, mac, 1000);
374 
375 	if (err) {
376 		return (-1);
377 	}
378 	return (0);
379 }
380 
381 static int
382 mos_writemac(struct mos_softc *sc, uint8_t *mac)
383 {
384 	struct usb_device_request req;
385 	usb_error_t err;
386 
387 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
388 	req.bRequest = MOS_UR_WRITEREG;
389 	USETW(req.wValue, 0);
390 	USETW(req.wIndex, MOS_MAC);
391 	USETW(req.wLength, ETHER_ADDR_LEN);
392 
393 	err = uether_do_request(&sc->sc_ue, &req, mac, 1000);
394 
395 	if (err) {
396 		MOS_DPRINTFN("mos_writemac error");
397 		return (-1);
398 	}
399 	return (0);
400 }
401 
402 static int
403 mos_write_mcast(struct mos_softc *sc, u_char *hashtbl)
404 {
405 	struct usb_device_request req;
406 	usb_error_t err;
407 
408 	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
409 	req.bRequest = MOS_UR_WRITEREG;
410 	USETW(req.wValue, 0);
411 	USETW(req.wIndex, MOS_MCAST_TABLE);
412 	USETW(req.wLength, 8);
413 
414 	err = uether_do_request(&sc->sc_ue, &req, hashtbl, 1000);
415 
416 	if (err) {
417 		MOS_DPRINTFN("mos_reg_mcast error");
418 		return (-1);
419 	}
420 	return (0);
421 }
422 
423 static int
424 mos_miibus_readreg(device_t dev, int phy, int reg)
425 {
426 	struct mos_softc *sc = device_get_softc(dev);
427 	uWord val;
428 	int i, res, locked;
429 
430 	USETW(val, 0);
431 
432 	locked = mtx_owned(&sc->sc_mtx);
433 	if (!locked)
434 		MOS_LOCK(sc);
435 
436 	mos_reg_write_2(sc, MOS_PHY_DATA, 0);
437 	mos_reg_write_1(sc, MOS_PHY_CTL, (phy & MOS_PHYCTL_PHYADDR) |
438 	    MOS_PHYCTL_READ);
439 	mos_reg_write_1(sc, MOS_PHY_STS, (reg & MOS_PHYSTS_PHYREG) |
440 	    MOS_PHYSTS_PENDING);
441 
442 	for (i = 0; i < MOS_TIMEOUT; i++) {
443 		if (mos_reg_read_1(sc, MOS_PHY_STS) & MOS_PHYSTS_READY)
444 			break;
445 	}
446 	if (i == MOS_TIMEOUT) {
447 		MOS_DPRINTFN("MII read timeout");
448 	}
449 	res = mos_reg_read_2(sc, MOS_PHY_DATA);
450 
451 	if (!locked)
452 		MOS_UNLOCK(sc);
453 	return (res);
454 }
455 
456 static int
457 mos_miibus_writereg(device_t dev, int phy, int reg, int val)
458 {
459 	struct mos_softc *sc = device_get_softc(dev);
460 	int i, locked;
461 
462 	locked = mtx_owned(&sc->sc_mtx);
463 	if (!locked)
464 		MOS_LOCK(sc);
465 
466 	mos_reg_write_2(sc, MOS_PHY_DATA, val);
467 	mos_reg_write_1(sc, MOS_PHY_CTL, (phy & MOS_PHYCTL_PHYADDR) |
468 	    MOS_PHYCTL_WRITE);
469 	mos_reg_write_1(sc, MOS_PHY_STS, (reg & MOS_PHYSTS_PHYREG) |
470 	    MOS_PHYSTS_PENDING);
471 
472 	for (i = 0; i < MOS_TIMEOUT; i++) {
473 		if (mos_reg_read_1(sc, MOS_PHY_STS) & MOS_PHYSTS_READY)
474 			break;
475 	}
476 	if (i == MOS_TIMEOUT)
477 		MOS_DPRINTFN("MII write timeout");
478 
479 	if (!locked)
480 		MOS_UNLOCK(sc);
481 	return 0;
482 }
483 
484 static void
485 mos_miibus_statchg(device_t dev)
486 {
487 	struct mos_softc *sc = device_get_softc(dev);
488 	struct mii_data *mii = GET_MII(sc);
489 	int val, err, locked;
490 
491 	locked = mtx_owned(&sc->sc_mtx);
492 	if (!locked)
493 		MOS_LOCK(sc);
494 
495 	/* disable RX, TX prior to changing FDX, SPEEDSEL */
496 	val = mos_reg_read_1(sc, MOS_CTL);
497 	val &= ~(MOS_CTL_TX_ENB | MOS_CTL_RX_ENB);
498 	mos_reg_write_1(sc, MOS_CTL, val);
499 
500 	/* reset register which counts dropped frames */
501 	mos_reg_write_1(sc, MOS_FRAME_DROP_CNT, 0);
502 
503 	if ((mii->mii_media_active & IFM_GMASK) == IFM_FDX)
504 		val |= MOS_CTL_FDX_ENB;
505 	else
506 		val &= ~(MOS_CTL_FDX_ENB);
507 
508 	switch (IFM_SUBTYPE(mii->mii_media_active)) {
509 	case IFM_100_TX:
510 		val |= MOS_CTL_SPEEDSEL;
511 		break;
512 	case IFM_10_T:
513 		val &= ~(MOS_CTL_SPEEDSEL);
514 		break;
515 	}
516 
517 	/* re-enable TX, RX */
518 	val |= (MOS_CTL_TX_ENB | MOS_CTL_RX_ENB);
519 	err = mos_reg_write_1(sc, MOS_CTL, val);
520 
521 	if (err)
522 		MOS_DPRINTFN("media change failed");
523 
524 	if (!locked)
525 		MOS_UNLOCK(sc);
526 }
527 
528 /*
529  * Set media options.
530  */
531 static int
532 mos_ifmedia_upd(struct ifnet *ifp)
533 {
534 	struct mos_softc *sc = ifp->if_softc;
535 	struct mii_data *mii = GET_MII(sc);
536 	struct mii_softc *miisc;
537 	int error;
538 
539 	MOS_LOCK_ASSERT(sc, MA_OWNED);
540 
541 	sc->mos_link = 0;
542 	LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
543 		PHY_RESET(miisc);
544 	error = mii_mediachg(mii);
545 	return (error);
546 }
547 
548 /*
549  * Report current media status.
550  */
551 static void
552 mos_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
553 {
554 	struct mos_softc *sc = ifp->if_softc;
555 	struct mii_data *mii = GET_MII(sc);
556 
557 	MOS_LOCK(sc);
558 	mii_pollstat(mii);
559 
560 	ifmr->ifm_active = mii->mii_media_active;
561 	ifmr->ifm_status = mii->mii_media_status;
562 	MOS_UNLOCK(sc);
563 }
564 
565 static void
566 mos_setpromisc(struct usb_ether *ue)
567 {
568 	struct mos_softc *sc = uether_getsc(ue);
569 	struct ifnet *ifp = uether_getifp(ue);
570 
571 	uint8_t rxmode;
572 
573 	MOS_LOCK_ASSERT(sc, MA_OWNED);
574 
575 	rxmode = mos_reg_read_1(sc, MOS_CTL);
576 
577 	/* If we want promiscuous mode, set the allframes bit. */
578 	if (ifp->if_flags & IFF_PROMISC) {
579 		rxmode |= MOS_CTL_RX_PROMISC;
580 	} else {
581 		rxmode &= ~MOS_CTL_RX_PROMISC;
582 	}
583 
584 	mos_reg_write_1(sc, MOS_CTL, rxmode);
585 }
586 
587 static u_int
588 mos_hash_maddr(void *arg, struct sockaddr_dl *sdl, u_int cnt)
589 {
590 	uint8_t *hashtbl = arg;
591 	uint32_t h;
592 
593 	h = ether_crc32_be(LLADDR(sdl), ETHER_ADDR_LEN) >> 26;
594 	hashtbl[h / 8] |= 1 << (h % 8);
595 
596 	return (1);
597 }
598 
599 static void
600 mos_setmulti(struct usb_ether *ue)
601 {
602 	struct mos_softc *sc = uether_getsc(ue);
603 	struct ifnet *ifp = uether_getifp(ue);
604 	uint8_t rxmode;
605 	uint8_t hashtbl[8] = {0, 0, 0, 0, 0, 0, 0, 0};
606 	int allmulti = 0;
607 
608 	MOS_LOCK_ASSERT(sc, MA_OWNED);
609 
610 	rxmode = mos_reg_read_1(sc, MOS_CTL);
611 
612 	if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC)
613 		allmulti = 1;
614 
615 	/* get all new ones */
616 	if_foreach_llmaddr(ifp, mos_hash_maddr, &hashtbl);
617 
618 	/* now program new ones */
619 	if (allmulti == 1) {
620 		rxmode |= MOS_CTL_ALLMULTI;
621 		mos_reg_write_1(sc, MOS_CTL, rxmode);
622 	} else {
623 		rxmode &= ~MOS_CTL_ALLMULTI;
624 		mos_write_mcast(sc, (void *)&hashtbl);
625 		mos_reg_write_1(sc, MOS_CTL, rxmode);
626 	}
627 }
628 
629 static void
630 mos_reset(struct mos_softc *sc)
631 {
632 	uint8_t ctl;
633 
634 	ctl = mos_reg_read_1(sc, MOS_CTL);
635 	ctl &= ~(MOS_CTL_RX_PROMISC | MOS_CTL_ALLMULTI | MOS_CTL_TX_ENB |
636 	    MOS_CTL_RX_ENB);
637 	/* Disable RX, TX, promiscuous and allmulticast mode */
638 	mos_reg_write_1(sc, MOS_CTL, ctl);
639 
640 	/* Reset frame drop counter register to zero */
641 	mos_reg_write_1(sc, MOS_FRAME_DROP_CNT, 0);
642 
643 	/* Wait a little while for the chip to get its brains in order. */
644 	usb_pause_mtx(&sc->sc_mtx, hz / 128);
645 	return;
646 }
647 
648 static void
649 mos_chip_init(struct mos_softc *sc)
650 {
651 	int i;
652 
653 	/*
654 	 * Rev.C devices have a pause threshold register which needs to be set
655 	 * at startup.
656 	 */
657 	if (mos_reg_read_1(sc, MOS_PAUSE_TRHD) != -1) {
658 		for (i = 0; i < MOS_PAUSE_REWRITES; i++)
659 			mos_reg_write_1(sc, MOS_PAUSE_TRHD, 0);
660 	}
661 	sc->mos_phyaddrs[0] = 1;
662 	sc->mos_phyaddrs[1] = 0xFF;
663 }
664 
665 /*
666  * Probe for a MCS7x30 chip.
667  */
668 static int
669 mos_probe(device_t dev)
670 {
671 	struct usb_attach_arg *uaa = device_get_ivars(dev);
672         int retval;
673 
674 	if (uaa->usb_mode != USB_MODE_HOST)
675 		return (ENXIO);
676 	if (uaa->info.bConfigIndex != MOS_CONFIG_IDX)
677 		return (ENXIO);
678 	if (uaa->info.bIfaceIndex != MOS_IFACE_IDX)
679 		return (ENXIO);
680 
681 	retval = usbd_lookup_id_by_uaa(mos_devs, sizeof(mos_devs), uaa);
682 	return (retval);
683 }
684 
685 /*
686  * Attach the interface. Allocate softc structures, do ifmedia
687  * setup and ethernet/BPF attach.
688  */
689 static int
690 mos_attach(device_t dev)
691 {
692 	struct usb_attach_arg *uaa = device_get_ivars(dev);
693 	struct mos_softc *sc = device_get_softc(dev);
694 	struct usb_ether *ue = &sc->sc_ue;
695 	uint8_t iface_index;
696 	int error;
697 
698 	sc->mos_flags = USB_GET_DRIVER_INFO(uaa);
699 
700 	device_set_usb_desc(dev);
701 	mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
702 
703 	iface_index = MOS_IFACE_IDX;
704 	error = usbd_transfer_setup(uaa->device, &iface_index,
705 	    sc->sc_xfer, mos_config, MOS_ENDPT_MAX,
706 	    sc, &sc->sc_mtx);
707 
708 	if (error) {
709 		device_printf(dev, "allocating USB transfers failed\n");
710 		goto detach;
711 	}
712 	ue->ue_sc = sc;
713 	ue->ue_dev = dev;
714 	ue->ue_udev = uaa->device;
715 	ue->ue_mtx = &sc->sc_mtx;
716 	ue->ue_methods = &mos_ue_methods;
717 
718 	if (sc->mos_flags & MCS7730) {
719 		MOS_DPRINTFN("model: MCS7730");
720 	} else if (sc->mos_flags & MCS7830) {
721 		MOS_DPRINTFN("model: MCS7830");
722 	} else if (sc->mos_flags & MCS7832) {
723 		MOS_DPRINTFN("model: MCS7832");
724 	}
725 	error = uether_ifattach(ue);
726 	if (error) {
727 		device_printf(dev, "could not attach interface\n");
728 		goto detach;
729 	}
730 	return (0);
731 
732 detach:
733 	mos_detach(dev);
734 	return (ENXIO);
735 }
736 
737 static void
738 mos_attach_post(struct usb_ether *ue)
739 {
740 	struct mos_softc *sc = uether_getsc(ue);
741         int err;
742 
743 	/* Read MAC address, inform the world. */
744 	err = mos_readmac(sc, ue->ue_eaddr);
745 
746 	if (err)
747 	  MOS_DPRINTFN("couldn't get MAC address");
748 
749 	MOS_DPRINTFN("address: %s", ether_sprintf(ue->ue_eaddr));
750 
751 	mos_chip_init(sc);
752 }
753 
754 static int
755 mos_detach(device_t dev)
756 {
757 	struct mos_softc *sc = device_get_softc(dev);
758 	struct usb_ether *ue = &sc->sc_ue;
759 
760 	usbd_transfer_unsetup(sc->sc_xfer, MOS_ENDPT_MAX);
761 	uether_ifdetach(ue);
762 	mtx_destroy(&sc->sc_mtx);
763 
764 	return (0);
765 }
766 
767 /*
768  * A frame has been uploaded: pass the resulting mbuf chain up to
769  * the higher level protocols.
770  */
771 static void
772 mos_bulk_read_callback(struct usb_xfer *xfer, usb_error_t error)
773 {
774 	struct mos_softc *sc = usbd_xfer_softc(xfer);
775 	struct usb_ether *ue = &sc->sc_ue;
776 	struct ifnet *ifp = uether_getifp(ue);
777 
778 	uint8_t rxstat = 0;
779 	uint32_t actlen;
780 	uint16_t pktlen = 0;
781 	struct usb_page_cache *pc;
782 
783 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
784 	pc = usbd_xfer_get_frame(xfer, 0);
785 
786 	switch (USB_GET_STATE(xfer)) {
787 	case USB_ST_TRANSFERRED:
788 		MOS_DPRINTFN("actlen : %d", actlen);
789 		if (actlen <= 1) {
790 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
791 			goto tr_setup;
792 		}
793 		/* evaluate status byte at the end */
794 		usbd_copy_out(pc, actlen - sizeof(rxstat), &rxstat,
795 		    sizeof(rxstat));
796 
797 		if (rxstat != MOS_RXSTS_VALID) {
798 			MOS_DPRINTFN("erroneous frame received");
799 			if (rxstat & MOS_RXSTS_SHORT_FRAME)
800 				MOS_DPRINTFN("frame size less than 64 bytes");
801 			if (rxstat & MOS_RXSTS_LARGE_FRAME) {
802 				MOS_DPRINTFN("frame size larger than "
803 				    "1532 bytes");
804 			}
805 			if (rxstat & MOS_RXSTS_CRC_ERROR)
806 				MOS_DPRINTFN("CRC error");
807 			if (rxstat & MOS_RXSTS_ALIGN_ERROR)
808 				MOS_DPRINTFN("alignment error");
809 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
810 			goto tr_setup;
811 		}
812 		/* Remember the last byte was used for the status fields */
813 		pktlen = actlen - 1;
814 		if (pktlen < sizeof(struct ether_header)) {
815 			MOS_DPRINTFN("error: pktlen %d is smaller "
816 			    "than ether_header %zd", pktlen,
817 			    sizeof(struct ether_header));
818 			if_inc_counter(ifp, IFCOUNTER_IERRORS, 1);
819 			goto tr_setup;
820 		}
821 		uether_rxbuf(ue, pc, 0, actlen);
822 		/* FALLTHROUGH */
823 	case USB_ST_SETUP:
824 tr_setup:
825 		usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
826 		usbd_transfer_submit(xfer);
827 		uether_rxflush(ue);
828 		return;
829 	default:
830 		MOS_DPRINTFN("bulk read error, %s", usbd_errstr(error));
831 		if (error != USB_ERR_CANCELLED) {
832 			usbd_xfer_set_stall(xfer);
833 			goto tr_setup;
834 		}
835 		MOS_DPRINTFN("start rx %i", usbd_xfer_max_len(xfer));
836 		return;
837 	}
838 }
839 
840 /*
841  * A frame was downloaded to the chip. It's safe for us to clean up
842  * the list buffers.
843  */
844 static void
845 mos_bulk_write_callback(struct usb_xfer *xfer, usb_error_t error)
846 {
847 	struct mos_softc *sc = usbd_xfer_softc(xfer);
848 	struct ifnet *ifp = uether_getifp(&sc->sc_ue);
849 	struct usb_page_cache *pc;
850 	struct mbuf *m;
851 
852 	switch (USB_GET_STATE(xfer)) {
853 	case USB_ST_TRANSFERRED:
854 		MOS_DPRINTFN("transfer of complete");
855 		if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
856 		/* FALLTHROUGH */
857 	case USB_ST_SETUP:
858 tr_setup:
859 		/*
860 		 * XXX: don't send anything if there is no link?
861 		 */
862 		IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
863 		if (m == NULL)
864 			return;
865 
866 		pc = usbd_xfer_get_frame(xfer, 0);
867 		usbd_m_copy_in(pc, 0, m, 0, m->m_pkthdr.len);
868 
869 		usbd_xfer_set_frame_len(xfer, 0, m->m_pkthdr.len);
870 
871 		/*
872 		 * if there's a BPF listener, bounce a copy
873 		 * of this frame to him:
874 		 */
875 		BPF_MTAP(ifp, m);
876 
877 		m_freem(m);
878 
879 		usbd_transfer_submit(xfer);
880 
881 		if_inc_counter(ifp, IFCOUNTER_OPACKETS, 1);
882 		return;
883 	default:
884 		MOS_DPRINTFN("usb error on tx: %s\n", usbd_errstr(error));
885 		if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
886 		if (error != USB_ERR_CANCELLED) {
887 			usbd_xfer_set_stall(xfer);
888 			goto tr_setup;
889 		}
890 		return;
891 	}
892 }
893 
894 static void
895 mos_tick(struct usb_ether *ue)
896 {
897 	struct mos_softc *sc = uether_getsc(ue);
898 	struct mii_data *mii = GET_MII(sc);
899 
900 	MOS_LOCK_ASSERT(sc, MA_OWNED);
901 
902 	mii_tick(mii);
903 	if (!sc->mos_link && mii->mii_media_status & IFM_ACTIVE &&
904 	    IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) {
905 		MOS_DPRINTFN("got link");
906 		sc->mos_link++;
907 		mos_start(ue);
908 	}
909 }
910 
911 static void
912 mos_start(struct usb_ether *ue)
913 {
914 	struct mos_softc *sc = uether_getsc(ue);
915 
916 	/*
917 	 * start the USB transfers, if not already started:
918 	 */
919 	usbd_transfer_start(sc->sc_xfer[MOS_ENDPT_TX]);
920 	usbd_transfer_start(sc->sc_xfer[MOS_ENDPT_RX]);
921 	usbd_transfer_start(sc->sc_xfer[MOS_ENDPT_INTR]);
922 }
923 
924 static void
925 mos_init(struct usb_ether *ue)
926 {
927 	struct mos_softc *sc = uether_getsc(ue);
928 	struct ifnet *ifp = uether_getifp(ue);
929 	uint8_t rxmode;
930 
931 	MOS_LOCK_ASSERT(sc, MA_OWNED);
932 
933 	/* Cancel pending I/O and free all RX/TX buffers. */
934 	mos_reset(sc);
935 
936 	/* Write MAC address */
937 	mos_writemac(sc, IF_LLADDR(ifp));
938 
939 	/* Read and set transmitter IPG values */
940 	sc->mos_ipgs[0] = mos_reg_read_1(sc, MOS_IPG0);
941 	sc->mos_ipgs[1] = mos_reg_read_1(sc, MOS_IPG1);
942 	mos_reg_write_1(sc, MOS_IPG0, sc->mos_ipgs[0]);
943 	mos_reg_write_1(sc, MOS_IPG1, sc->mos_ipgs[1]);
944 
945 	/*
946 	 * Enable receiver and transmitter, bridge controls speed/duplex
947 	 * mode
948 	 */
949 	rxmode = mos_reg_read_1(sc, MOS_CTL);
950 	rxmode |= MOS_CTL_RX_ENB | MOS_CTL_TX_ENB | MOS_CTL_BS_ENB;
951 	rxmode &= ~(MOS_CTL_SLEEP);
952 
953 	mos_setpromisc(ue);
954 
955 	/* XXX: broadcast mode? */
956 	mos_reg_write_1(sc, MOS_CTL, rxmode);
957 
958 	/* Load the multicast filter. */
959 	mos_setmulti(ue);
960 
961 	ifp->if_drv_flags |= IFF_DRV_RUNNING;
962 	mos_start(ue);
963 }
964 
965 static void
966 mos_intr_callback(struct usb_xfer *xfer, usb_error_t error)
967 {
968 	struct mos_softc *sc = usbd_xfer_softc(xfer);
969 	struct ifnet *ifp = uether_getifp(&sc->sc_ue);
970 	struct usb_page_cache *pc;
971 	uint32_t pkt;
972 	int actlen;
973 
974 	if_inc_counter(ifp, IFCOUNTER_OERRORS, 1);
975 
976 	usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
977 	MOS_DPRINTFN("actlen %i", actlen);
978 
979 	switch (USB_GET_STATE(xfer)) {
980 	case USB_ST_TRANSFERRED:
981 
982 		pc = usbd_xfer_get_frame(xfer, 0);
983 		usbd_copy_out(pc, 0, &pkt, sizeof(pkt));
984 		/* FALLTHROUGH */
985 	case USB_ST_SETUP:
986 tr_setup:
987 		return;
988 	default:
989 		if (error != USB_ERR_CANCELLED) {
990 			usbd_xfer_set_stall(xfer);
991 			goto tr_setup;
992 		}
993 		return;
994 	}
995 }
996 
997 /*
998  * Stop the adapter and free any mbufs allocated to the
999  * RX and TX lists.
1000  */
1001 static void
1002 mos_stop(struct usb_ether *ue)
1003 {
1004 	struct mos_softc *sc = uether_getsc(ue);
1005 	struct ifnet *ifp = uether_getifp(ue);
1006 
1007 	mos_reset(sc);
1008 
1009 	MOS_LOCK_ASSERT(sc, MA_OWNED);
1010 	ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
1011 
1012 	/* stop all the transfers, if not already stopped */
1013 	usbd_transfer_stop(sc->sc_xfer[MOS_ENDPT_TX]);
1014 	usbd_transfer_stop(sc->sc_xfer[MOS_ENDPT_RX]);
1015 	usbd_transfer_stop(sc->sc_xfer[MOS_ENDPT_INTR]);
1016 
1017 	sc->mos_link = 0;
1018 }
1019