xref: /freebsd/sys/dev/usb/net/if_axereg.h (revision 675aae732d3dd2ec0f12f39df3a1fbfe693a4ebd)
1 /*-
2  * SPDX-License-Identifier: BSD-4-Clause
3  *
4  * Copyright (c) 1997, 1998, 1999, 2000-2003
5  *	Bill Paul <wpaul@windriver.com>.  All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. All advertising materials mentioning features or use of this software
16  *    must display the following acknowledgement:
17  *	This product includes software developed by Bill Paul.
18  * 4. Neither the name of the author nor the names of any co-contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
26  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
27  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
28  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
29  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
30  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
31  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
32  * THE POSSIBILITY OF SUCH DAMAGE.
33  *
34  * $FreeBSD$
35  */
36 
37 /*
38  * Definitions for the ASIX Electronics AX88172, AX88178
39  * and AX88772 to ethernet controllers.
40  */
41 
42 /*
43  * Vendor specific commands.  ASIX conveniently doesn't document the 'set
44  * NODEID' command in their datasheet (thanks a lot guys).
45  * To make handling these commands easier, I added some extra data which is
46  * decided by the axe_cmd() routine. Commands are encoded in 16 bits, with
47  * the format: LDCC. L and D are both nibbles in the high byte.  L represents
48  * the data length (0 to 15) and D represents the direction (0 for vendor read,
49  * 1 for vendor write).  CC is the command byte, as specified in the manual.
50  */
51 
52 #define	AXE_CMD_IS_WRITE(x)	(((x) & 0x0F00) >> 8)
53 #define	AXE_CMD_LEN(x)		(((x) & 0xF000) >> 12)
54 #define	AXE_CMD_CMD(x)		((x) & 0x00FF)
55 
56 #define	AXE_172_CMD_READ_RXTX_SRAM		0x2002
57 #define	AXE_182_CMD_READ_RXTX_SRAM		0x8002
58 #define	AXE_172_CMD_WRITE_RX_SRAM		0x0103
59 #define	AXE_182_CMD_WRITE_RXTX_SRAM		0x8103
60 #define	AXE_172_CMD_WRITE_TX_SRAM		0x0104
61 #define	AXE_CMD_MII_OPMODE_SW			0x0106
62 #define	AXE_CMD_MII_READ_REG			0x2007
63 #define	AXE_CMD_MII_WRITE_REG			0x2108
64 #define	AXE_CMD_MII_READ_OPMODE			0x1009
65 #define	AXE_CMD_MII_OPMODE_HW			0x010A
66 #define	AXE_CMD_SROM_READ			0x200B
67 #define	AXE_CMD_SROM_WRITE			0x010C
68 #define	AXE_CMD_SROM_WR_ENABLE			0x010D
69 #define	AXE_CMD_SROM_WR_DISABLE			0x010E
70 #define	AXE_CMD_RXCTL_READ			0x200F
71 #define	AXE_CMD_RXCTL_WRITE			0x0110
72 #define	AXE_CMD_READ_IPG012			0x3011
73 #define	AXE_172_CMD_WRITE_IPG0			0x0112
74 #define	AXE_178_CMD_WRITE_IPG012		0x0112
75 #define	AXE_172_CMD_WRITE_IPG1			0x0113
76 #define	AXE_178_CMD_READ_NODEID			0x6013
77 #define	AXE_172_CMD_WRITE_IPG2			0x0114
78 #define	AXE_178_CMD_WRITE_NODEID		0x6114
79 #define	AXE_CMD_READ_MCAST			0x8015
80 #define	AXE_CMD_WRITE_MCAST			0x8116
81 #define	AXE_172_CMD_READ_NODEID			0x6017
82 #define	AXE_172_CMD_WRITE_NODEID		0x6118
83 
84 #define	AXE_CMD_READ_PHYID			0x2019
85 #define	AXE_172_CMD_READ_MEDIA			0x101A
86 #define	AXE_178_CMD_READ_MEDIA			0x201A
87 #define	AXE_CMD_WRITE_MEDIA			0x011B
88 #define	AXE_CMD_READ_MONITOR_MODE		0x101C
89 #define	AXE_CMD_WRITE_MONITOR_MODE		0x011D
90 #define	AXE_CMD_READ_GPIO			0x101E
91 #define	AXE_CMD_WRITE_GPIO			0x011F
92 
93 #define	AXE_CMD_SW_RESET_REG			0x0120
94 #define	AXE_CMD_SW_PHY_STATUS			0x0021
95 #define	AXE_CMD_SW_PHY_SELECT			0x0122
96 
97 /* AX88772A and AX88772B only. */
98 #define	AXE_CMD_READ_VLAN_CTRL			0x4027
99 #define	AXE_CMD_WRITE_VLAN_CTRL			0x4028
100 
101 #define	AXE_772B_CMD_RXCTL_WRITE_CFG		0x012A
102 #define	AXE_772B_CMD_READ_RXCSUM		0x002B
103 #define	AXE_772B_CMD_WRITE_RXCSUM		0x012C
104 #define	AXE_772B_CMD_READ_TXCSUM		0x002D
105 #define	AXE_772B_CMD_WRITE_TXCSUM		0x012E
106 
107 #define	AXE_SW_RESET_CLEAR			0x00
108 #define	AXE_SW_RESET_RR				0x01
109 #define	AXE_SW_RESET_RT				0x02
110 #define	AXE_SW_RESET_PRTE			0x04
111 #define	AXE_SW_RESET_PRL			0x08
112 #define	AXE_SW_RESET_BZ				0x10
113 #define	AXE_SW_RESET_IPRL			0x20
114 #define	AXE_SW_RESET_IPPD			0x40
115 
116 /* AX88178 documentation says to always write this bit... */
117 #define	AXE_178_RESET_MAGIC			0x40
118 
119 #define	AXE_178_MEDIA_GMII			0x0001
120 #define	AXE_MEDIA_FULL_DUPLEX			0x0002
121 #define	AXE_172_MEDIA_TX_ABORT_ALLOW		0x0004
122 
123 /* AX88178/88772 documentation says to always write 1 to bit 2 */
124 #define	AXE_178_MEDIA_MAGIC			0x0004
125 /* AX88772 documentation says to always write 0 to bit 3 */
126 #define	AXE_178_MEDIA_ENCK			0x0008
127 #define	AXE_172_MEDIA_FLOW_CONTROL_EN		0x0010
128 #define	AXE_178_MEDIA_RXFLOW_CONTROL_EN		0x0010
129 #define	AXE_178_MEDIA_TXFLOW_CONTROL_EN		0x0020
130 #define	AXE_178_MEDIA_JUMBO_EN			0x0040
131 #define	AXE_178_MEDIA_LTPF_ONLY			0x0080
132 #define	AXE_178_MEDIA_RX_EN			0x0100
133 #define	AXE_178_MEDIA_100TX			0x0200
134 #define	AXE_178_MEDIA_SBP			0x0800
135 #define	AXE_178_MEDIA_SUPERMAC			0x1000
136 
137 #define	AXE_RXCMD_PROMISC			0x0001
138 #define	AXE_RXCMD_ALLMULTI			0x0002
139 #define	AXE_172_RXCMD_UNICAST			0x0004
140 #define	AXE_178_RXCMD_KEEP_INVALID_CRC		0x0004
141 #define	AXE_RXCMD_BROADCAST			0x0008
142 #define	AXE_RXCMD_MULTICAST			0x0010
143 #define	AXE_RXCMD_ACCEPT_RUNT			0x0040	/* AX88772B */
144 #define	AXE_RXCMD_ENABLE			0x0080
145 #define	AXE_178_RXCMD_MFB_MASK			0x0300
146 #define	AXE_178_RXCMD_MFB_2048			0x0000
147 #define	AXE_178_RXCMD_MFB_4096			0x0100
148 #define	AXE_178_RXCMD_MFB_8192			0x0200
149 #define	AXE_178_RXCMD_MFB_16384			0x0300
150 #define	AXE_772B_RXCMD_HDR_TYPE_0		0x0000
151 #define	AXE_772B_RXCMD_HDR_TYPE_1		0x0100
152 #define	AXE_772B_RXCMD_IPHDR_ALIGN		0x0200
153 #define	AXE_772B_RXCMD_ADD_CHKSUM		0x0400
154 #define	AXE_RXCMD_LOOPBACK			0x1000	/* AX88772A/AX88772B */
155 
156 #define	AXE_PHY_SEL_PRI		1
157 #define	AXE_PHY_SEL_SEC		0
158 #define	AXE_PHY_TYPE_MASK	0xE0
159 #define	AXE_PHY_TYPE_SHIFT	5
160 #define	AXE_PHY_TYPE(x)		\
161 	(((x) & AXE_PHY_TYPE_MASK) >> AXE_PHY_TYPE_SHIFT)
162 
163 #define	PHY_TYPE_100_HOME	0	/* 10/100 or 1M HOME PHY */
164 #define	PHY_TYPE_GIG		1	/* Gigabit PHY */
165 #define	PHY_TYPE_SPECIAL	4	/* Special case */
166 #define	PHY_TYPE_RSVD		5	/* Reserved */
167 #define	PHY_TYPE_NON_SUP	7	/* Non-supported PHY */
168 
169 #define	AXE_PHY_NO_MASK		0x1F
170 #define	AXE_PHY_NO(x)		((x) & AXE_PHY_NO_MASK)
171 
172 #define	AXE_772_PHY_NO_EPHY	0x10	/* Embedded 10/100 PHY of AX88772 */
173 
174 #define	AXE_GPIO0_EN		0x01
175 #define	AXE_GPIO0		0x02
176 #define	AXE_GPIO1_EN		0x04
177 #define	AXE_GPIO1		0x08
178 #define	AXE_GPIO2_EN		0x10
179 #define	AXE_GPIO2		0x20
180 #define	AXE_GPIO_RELOAD_EEPROM	0x80
181 
182 #define	AXE_PHY_MODE_MARVELL		0x00
183 #define	AXE_PHY_MODE_CICADA		0x01
184 #define	AXE_PHY_MODE_AGERE		0x02
185 #define	AXE_PHY_MODE_CICADA_V2		0x05
186 #define	AXE_PHY_MODE_AGERE_GMII		0x06
187 #define	AXE_PHY_MODE_CICADA_V2_ASIX	0x09
188 #define	AXE_PHY_MODE_REALTEK_8211CL	0x0C
189 #define	AXE_PHY_MODE_REALTEK_8211BN	0x0D
190 #define	AXE_PHY_MODE_REALTEK_8251CL	0x0E
191 #define	AXE_PHY_MODE_ATTANSIC		0x40
192 
193 /* AX88772A/AX88772B only. */
194 #define	AXE_SW_PHY_SELECT_EXT		0x0000
195 #define	AXE_SW_PHY_SELECT_EMBEDDED	0x0001
196 #define	AXE_SW_PHY_SELECT_AUTO		0x0002
197 #define	AXE_SW_PHY_SELECT_SS_MII	0x0004
198 #define	AXE_SW_PHY_SELECT_SS_RVRS_MII	0x0008
199 #define	AXE_SW_PHY_SELECT_SS_RVRS_RMII	0x000C
200 #define	AXE_SW_PHY_SELECT_SS_ENB	0x0010
201 
202 /* AX88772A/AX88772B VLAN control. */
203 #define	AXE_VLAN_CTRL_ENB		0x00001000
204 #define	AXE_VLAN_CTRL_STRIP		0x00002000
205 #define	AXE_VLAN_CTRL_VID1_MASK		0x00000FFF
206 #define	AXE_VLAN_CTRL_VID2_MASK		0x0FFF0000
207 
208 #define	AXE_RXCSUM_IP			0x0001
209 #define	AXE_RXCSUM_IPVE			0x0002
210 #define	AXE_RXCSUM_IPV6E		0x0004
211 #define	AXE_RXCSUM_TCP			0x0008
212 #define	AXE_RXCSUM_UDP			0x0010
213 #define	AXE_RXCSUM_ICMP			0x0020
214 #define	AXE_RXCSUM_IGMP			0x0040
215 #define	AXE_RXCSUM_ICMP6		0x0080
216 #define	AXE_RXCSUM_TCPV6		0x0100
217 #define	AXE_RXCSUM_UDPV6		0x0200
218 #define	AXE_RXCSUM_ICMPV6		0x0400
219 #define	AXE_RXCSUM_IGMPV6		0x0800
220 #define	AXE_RXCSUM_ICMP6V6		0x1000
221 #define	AXE_RXCSUM_FOPC			0x8000
222 
223 #define	AXE_RXCSUM_64TE			0x0100
224 #define	AXE_RXCSUM_PPPOE		0x0200
225 #define	AXE_RXCSUM_RPCE			0x8000
226 
227 #define	AXE_TXCSUM_IP			0x0001
228 #define	AXE_TXCSUM_TCP			0x0002
229 #define	AXE_TXCSUM_UDP			0x0004
230 #define	AXE_TXCSUM_ICMP			0x0008
231 #define	AXE_TXCSUM_IGMP			0x0010
232 #define	AXE_TXCSUM_ICMP6		0x0020
233 #define	AXE_TXCSUM_TCPV6		0x0100
234 #define	AXE_TXCSUM_UDPV6		0x0200
235 #define	AXE_TXCSUM_ICMPV6		0x0400
236 #define	AXE_TXCSUM_IGMPV6		0x0800
237 #define	AXE_TXCSUM_ICMP6V6		0x1000
238 
239 #define	AXE_TXCSUM_64TE			0x0001
240 #define	AXE_TXCSUM_PPPOE		0x0002
241 
242 #define	AXE_BULK_BUF_SIZE	16384	/* bytes */
243 
244 #define	AXE_CTL_READ		0x01
245 #define	AXE_CTL_WRITE		0x02
246 
247 #define	AXE_CONFIG_IDX		0	/* config number 1 */
248 #define	AXE_IFACE_IDX		0
249 
250 /* EEPROM Map. */
251 #define	AXE_EEPROM_772B_NODE_ID		0x04
252 #define	AXE_EEPROM_772B_PHY_PWRCFG	0x18
253 
254 struct ax88772b_mfb {
255 	int	byte_cnt;
256 	int	threshold;
257 	int	size;
258 };
259 #define	AX88772B_MFB_2K		0
260 #define	AX88772B_MFB_4K		1
261 #define	AX88772B_MFB_6K		2
262 #define	AX88772B_MFB_8K		3
263 #define	AX88772B_MFB_16K	4
264 #define	AX88772B_MFB_20K	5
265 #define	AX88772B_MFB_24K	6
266 #define	AX88772B_MFB_32K	7
267 
268 struct axe_sframe_hdr {
269 	uint16_t len;
270 #define	AXE_HDR_LEN_MASK	0xFFFF
271 	uint16_t ilen;
272 } __packed;
273 
274 #define	AXE_TX_CSUM_PSEUDO_HDR	0x4000
275 #define	AXE_TX_CSUM_DIS		0x8000
276 
277 /*
278  * When RX checksum offloading is enabled, AX88772B uses new RX header
279  * format and it's not compatible with previous RX header format.  In
280  * addition, IP header align option should be enabled to get correct
281  * frame size including RX header.  Total transferred size including
282  * the RX header is multiple of 4 and controller will pad necessary
283  * bytes if the length is not multiple of 4.
284  * This driver does not enable partial checksum feature which will
285  * compute 16bit checksum from 14th byte to the end of the frame.  If
286  * this feature is enabled, computed checksum value is embedded into
287  * RX header which in turn means it uses different RX header format.
288  */
289 struct axe_csum_hdr {
290 	uint16_t len;
291 #define	AXE_CSUM_HDR_LEN_MASK		0x07FF
292 #define	AXE_CSUM_HDR_CRC_ERR		0x1000
293 #define	AXE_CSUM_HDR_MII_ERR		0x2000
294 #define	AXE_CSUM_HDR_RUNT		0x4000
295 #define	AXE_CSUM_HDR_BMCAST		0x8000
296 	uint16_t ilen;
297 	uint16_t cstatus;
298 #define	AXE_CSUM_HDR_VLAN_MASK		0x0007
299 #define	AXE_CSUM_HDR_VLAN_STRIP		0x0008
300 #define	AXE_CSUM_HDR_VLAN_PRI_MASK	0x0070
301 #define	AXE_CSUM_HDR_L4_CSUM_ERR	0x0100
302 #define	AXE_CSUM_HDR_L3_CSUM_ERR	0x0200
303 #define	AXE_CSUM_HDR_L4_TYPE_UDP	0x0400
304 #define	AXE_CSUM_HDR_L4_TYPE_ICMP	0x0800
305 #define	AXE_CSUM_HDR_L4_TYPE_IGMP	0x0C00
306 #define	AXE_CSUM_HDR_L4_TYPE_TCP	0x1000
307 #define	AXE_CSUM_HDR_L4_TYPE_TCPV6	0x1400
308 #define	AXE_CSUM_HDR_L4_TYPE_MASK	0x1C00
309 #define	AXE_CSUM_HDR_L3_TYPE_IPV4	0x2000
310 #define	AXE_CSUM_HDR_L3_TYPE_IPV6	0x4000
311 
312 #ifdef AXE_APPEND_PARTIAL_CSUM
313 	/*
314 	 * These members present only when partial checksum
315 	 * offloading is enabled.  The checksum value is simple
316 	 * 16bit sum of received frame starting at offset 14 of
317 	 * the frame to the end of the frame excluding FCS bytes.
318 	 */
319 	uint16_t csum_value;
320 	uint16_t dummy;
321 #endif
322 } __packed;
323 
324 #define	AXE_CSUM_RXBYTES(x)	((x) & AXE_CSUM_HDR_LEN_MASK)
325 
326 #define	GET_MII(sc)		uether_getmii(&(sc)->sc_ue)
327 
328 /* The interrupt endpoint is currently unused by the ASIX part. */
329 enum {
330 	AXE_BULK_DT_WR,
331 	AXE_BULK_DT_RD,
332 	AXE_N_TRANSFER,
333 };
334 
335 struct axe_softc {
336 	struct usb_ether	sc_ue;
337 	struct mtx		sc_mtx;
338 	struct usb_xfer	*sc_xfer[AXE_N_TRANSFER];
339 	int			sc_phyno;
340 
341 	int			sc_flags;
342 #define	AXE_FLAG_LINK		0x0001
343 #define	AXE_FLAG_STD_FRAME	0x0010
344 #define	AXE_FLAG_CSUM_FRAME	0x0020
345 #define	AXE_FLAG_772		0x1000	/* AX88772 */
346 #define	AXE_FLAG_772A		0x2000	/* AX88772A */
347 #define	AXE_FLAG_772B		0x4000	/* AX88772B */
348 #define	AXE_FLAG_178		0x8000	/* AX88178 */
349 
350 	uint8_t			sc_ipgs[3];
351 	uint8_t			sc_phyaddrs[2];
352 	uint16_t		sc_pwrcfg;
353 	uint16_t		sc_lenmask;
354 };
355 
356 #define	AXE_IS_178_FAMILY(sc)						  \
357 	((sc)->sc_flags & (AXE_FLAG_772 | AXE_FLAG_772A | AXE_FLAG_772B | \
358 	AXE_FLAG_178))
359 
360 #define	AXE_IS_772(sc)							  \
361 	((sc)->sc_flags & (AXE_FLAG_772 | AXE_FLAG_772A | AXE_FLAG_772B))
362 
363 #define	AXE_LOCK(_sc)		mtx_lock(&(_sc)->sc_mtx)
364 #define	AXE_UNLOCK(_sc)		mtx_unlock(&(_sc)->sc_mtx)
365 #define	AXE_LOCK_ASSERT(_sc, t)	mtx_assert(&(_sc)->sc_mtx, t)
366