1 /*- 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ee.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD$ 33 */ 34 35 /* 36 * Register definitions for ADMtek Pegasus AN986 USB to Ethernet 37 * chip. The Pegasus uses a total of four USB endpoints: the control 38 * endpoint (0), a bulk read endpoint for receiving packets (1), 39 * a bulk write endpoint for sending packets (2) and an interrupt 40 * endpoint for passing RX and TX status (3). Endpoint 0 is used 41 * to read and write the ethernet module's registers. All registers 42 * are 8 bits wide. 43 * 44 * Packet transfer is done in 64 byte chunks. The last chunk in a 45 * transfer is denoted by having a length less that 64 bytes. For 46 * the RX case, the data includes an optional RX status word. 47 */ 48 49 #define AUE_UR_READREG 0xF0 50 #define AUE_UR_WRITEREG 0xF1 51 52 #define AUE_CONFIG_INDEX 0 /* config number 1 */ 53 #define AUE_IFACE_IDX 0 54 55 /* 56 * Note that while the ADMtek technically has four endpoints, the control 57 * endpoint (endpoint 0) is regarded as special by the USB code and drivers 58 * don't have direct access to it (we access it using usb2_do_request() 59 * when reading/writing registers. Consequently, our endpoint indexes 60 * don't match those in the ADMtek Pegasus manual: we consider the RX data 61 * endpoint to be index 0 and work up from there. 62 */ 63 enum { 64 AUE_BULK_DT_WR, 65 AUE_BULK_DT_RD, 66 AUE_INTR_DT_RD, 67 AUE_N_TRANSFER, 68 }; 69 70 #define AUE_INTR_PKTLEN 0x8 71 72 #define AUE_CTL0 0x00 73 #define AUE_CTL1 0x01 74 #define AUE_CTL2 0x02 75 #define AUE_MAR0 0x08 76 #define AUE_MAR1 0x09 77 #define AUE_MAR2 0x0A 78 #define AUE_MAR3 0x0B 79 #define AUE_MAR4 0x0C 80 #define AUE_MAR5 0x0D 81 #define AUE_MAR6 0x0E 82 #define AUE_MAR7 0x0F 83 #define AUE_MAR AUE_MAR0 84 #define AUE_PAR0 0x10 85 #define AUE_PAR1 0x11 86 #define AUE_PAR2 0x12 87 #define AUE_PAR3 0x13 88 #define AUE_PAR4 0x14 89 #define AUE_PAR5 0x15 90 #define AUE_PAR AUE_PAR0 91 #define AUE_PAUSE0 0x18 92 #define AUE_PAUSE1 0x19 93 #define AUE_PAUSE AUE_PAUSE0 94 #define AUE_RX_FLOWCTL_CNT 0x1A 95 #define AUE_RX_FLOWCTL_FIFO 0x1B 96 #define AUE_REG_1D 0x1D 97 #define AUE_EE_REG 0x20 98 #define AUE_EE_DATA0 0x21 99 #define AUE_EE_DATA1 0x22 100 #define AUE_EE_DATA AUE_EE_DATA0 101 #define AUE_EE_CTL 0x23 102 #define AUE_PHY_ADDR 0x25 103 #define AUE_PHY_DATA0 0x26 104 #define AUE_PHY_DATA1 0x27 105 #define AUE_PHY_DATA AUE_PHY_DATA0 106 #define AUE_PHY_CTL 0x28 107 #define AUE_USB_STS 0x2A 108 #define AUE_TXSTAT0 0x2B 109 #define AUE_TXSTAT1 0x2C 110 #define AUE_TXSTAT AUE_TXSTAT0 111 #define AUE_RXSTAT 0x2D 112 #define AUE_PKTLOST0 0x2E 113 #define AUE_PKTLOST1 0x2F 114 #define AUE_PKTLOST AUE_PKTLOST0 115 116 #define AUE_REG_7B 0x7B 117 #define AUE_GPIO0 0x7E 118 #define AUE_GPIO1 0x7F 119 #define AUE_REG_81 0x81 120 121 #define AUE_CTL0_INCLUDE_RXCRC 0x01 122 #define AUE_CTL0_ALLMULTI 0x02 123 #define AUE_CTL0_STOP_BACKOFF 0x04 124 #define AUE_CTL0_RXSTAT_APPEND 0x08 125 #define AUE_CTL0_WAKEON_ENB 0x10 126 #define AUE_CTL0_RXPAUSE_ENB 0x20 127 #define AUE_CTL0_RX_ENB 0x40 128 #define AUE_CTL0_TX_ENB 0x80 129 130 #define AUE_CTL1_HOMELAN 0x04 131 #define AUE_CTL1_RESETMAC 0x08 132 #define AUE_CTL1_SPEEDSEL 0x10 /* 0 = 10mbps, 1 = 100mbps */ 133 #define AUE_CTL1_DUPLEX 0x20 /* 0 = half, 1 = full */ 134 #define AUE_CTL1_DELAYHOME 0x40 135 136 #define AUE_CTL2_EP3_CLR 0x01 /* reading EP3 clrs status regs */ 137 #define AUE_CTL2_RX_BADFRAMES 0x02 138 #define AUE_CTL2_RX_PROMISC 0x04 139 #define AUE_CTL2_LOOPBACK 0x08 140 #define AUE_CTL2_EEPROMWR_ENB 0x10 141 #define AUE_CTL2_EEPROM_LOAD 0x20 142 143 #define AUE_EECTL_WRITE 0x01 144 #define AUE_EECTL_READ 0x02 145 #define AUE_EECTL_DONE 0x04 146 147 #define AUE_PHYCTL_PHYREG 0x1F 148 #define AUE_PHYCTL_WRITE 0x20 149 #define AUE_PHYCTL_READ 0x40 150 #define AUE_PHYCTL_DONE 0x80 151 152 #define AUE_USBSTS_SUSPEND 0x01 153 #define AUE_USBSTS_RESUME 0x02 154 155 #define AUE_TXSTAT0_JABTIMO 0x04 156 #define AUE_TXSTAT0_CARLOSS 0x08 157 #define AUE_TXSTAT0_NOCARRIER 0x10 158 #define AUE_TXSTAT0_LATECOLL 0x20 159 #define AUE_TXSTAT0_EXCESSCOLL 0x40 160 #define AUE_TXSTAT0_UNDERRUN 0x80 161 162 #define AUE_TXSTAT1_PKTCNT 0x0F 163 #define AUE_TXSTAT1_FIFO_EMPTY 0x40 164 #define AUE_TXSTAT1_FIFO_FULL 0x80 165 166 #define AUE_RXSTAT_OVERRUN 0x01 167 #define AUE_RXSTAT_PAUSE 0x02 168 169 #define AUE_GPIO_IN0 0x01 170 #define AUE_GPIO_OUT0 0x02 171 #define AUE_GPIO_SEL0 0x04 172 #define AUE_GPIO_IN1 0x08 173 #define AUE_GPIO_OUT1 0x10 174 #define AUE_GPIO_SEL1 0x20 175 176 #define AUE_TIMEOUT 100 /* 10*ms */ 177 #define AUE_MIN_FRAMELEN 60 178 179 #define AUE_RXSTAT_MCAST 0x01 180 #define AUE_RXSTAT_GIANT 0x02 181 #define AUE_RXSTAT_RUNT 0x04 182 #define AUE_RXSTAT_CRCERR 0x08 183 #define AUE_RXSTAT_DRIBBLE 0x10 184 #define AUE_RXSTAT_MASK 0x1E 185 186 #define GET_MII(sc) usb2_ether_getmii(&(sc)->sc_ue) 187 188 struct aue_intrpkt { 189 uint8_t aue_txstat0; 190 uint8_t aue_txstat1; 191 uint8_t aue_rxstat; 192 uint8_t aue_rxlostpkt0; 193 uint8_t aue_rxlostpkt1; 194 uint8_t aue_wakeupstat; 195 uint8_t aue_rsvd; 196 } __packed; 197 198 struct aue_rxpkt { 199 uint16_t aue_pktlen; 200 uint8_t aue_rxstat; 201 uint8_t pad; 202 } __packed; 203 204 struct aue_softc { 205 struct usb2_ether sc_ue; 206 struct mtx sc_mtx; 207 struct usb2_xfer *sc_xfer[AUE_N_TRANSFER]; 208 209 int sc_flags; 210 #define AUE_FLAG_LSYS 0x0001 /* use Linksys reset */ 211 #define AUE_FLAG_PNA 0x0002 /* has Home PNA */ 212 #define AUE_FLAG_PII 0x0004 /* Pegasus II chip */ 213 #define AUE_FLAG_LINK 0x0008 /* wait for link to come up */ 214 #define AUE_FLAG_VER_2 0x0200 /* chip is version 2 */ 215 #define AUE_FLAG_DUAL_PHY 0x0400 /* chip has two transcivers */ 216 }; 217 218 #define AUE_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx) 219 #define AUE_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx) 220 #define AUE_LOCK_ASSERT(_sc, t) mtx_assert(&(_sc)->sc_mtx, t) 221