1 /* $OpenBSD: ugold.c,v 1.7 2014/12/11 18:39:27 mpi Exp $ */ 2 3 /* 4 * Copyright (c) 2013 Takayoshi SASANO <sasano@openbsd.org> 5 * Copyright (c) 2013 Martin Pieuchot <mpi@openbsd.org> 6 * 7 * Permission to use, copy, modify, and distribute this software for any 8 * purpose with or without fee is hereby granted, provided that the above 9 * copyright notice and this permission notice appear in all copies. 10 * 11 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCAIMS ALL WARRANTIES 12 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 13 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 14 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 15 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 16 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 17 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 18 */ 19 20 /* Driver for Microdia's HID based TEMPer Temperature sensor */ 21 22 #include <sys/cdefs.h> 23 __FBSDID("$FreeBSD$"); 24 25 #include <sys/stdint.h> 26 #include <sys/stddef.h> 27 #include <sys/param.h> 28 #include <sys/queue.h> 29 #include <sys/types.h> 30 #include <sys/systm.h> 31 #include <sys/kernel.h> 32 #include <sys/bus.h> 33 #include <sys/module.h> 34 #include <sys/lock.h> 35 #include <sys/mutex.h> 36 #include <sys/condvar.h> 37 #include <sys/sysctl.h> 38 #include <sys/sx.h> 39 #include <sys/unistd.h> 40 #include <sys/callout.h> 41 #include <sys/malloc.h> 42 #include <sys/priv.h> 43 #include <sys/conf.h> 44 45 #include <dev/usb/usb.h> 46 #include <dev/usb/usbdi.h> 47 #include <dev/usb/usbhid.h> 48 #include <dev/usb/usb_process.h> 49 #include <dev/usb/usbdi_util.h> 50 #include "usbdevs.h" 51 52 #define USB_DEBUG_VAR usb_debug 53 #include <dev/usb/usb_debug.h> 54 55 #define UGOLD_INNER 0 56 #define UGOLD_OUTER 1 57 #define UGOLD_MAX_SENSORS 2 58 59 #define UGOLD_CMD_DATA 0x80 60 #define UGOLD_CMD_INIT 0x82 61 62 enum { 63 UGOLD_INTR_DT, 64 UGOLD_N_TRANSFER, 65 }; 66 67 /* 68 * This driver only uses two of the three known commands for the 69 * TEMPerV1.2 device. 70 * 71 * The first byte of the answer corresponds to the command and the 72 * second one seems to be the size (in bytes) of the answer. 73 * 74 * The device always sends 8 bytes and if the length of the answer 75 * is less than that, it just leaves the last bytes untouched. That 76 * is why most of the time the last n bytes of the answers are the 77 * same. 78 * 79 * The third command below seems to generate two answers with a 80 * string corresponding to the device, for example: 81 * 'TEMPer1F' and '1.1Per1F' (here Per1F is repeated). 82 */ 83 static uint8_t cmd_data[8] = {0x01, 0x80, 0x33, 0x01, 0x00, 0x00, 0x00, 0x00}; 84 static uint8_t cmd_init[8] = {0x01, 0x82, 0x77, 0x01, 0x00, 0x00, 0x00, 0x00}; 85 86 #if 0 87 static uint8_t cmd_type[8] = {0x01, 0x86, 0xff, 0x01, 0x00, 0x00, 0x00, 0x00}; 88 89 #endif 90 91 struct ugold_softc; 92 struct ugold_readout_msg { 93 struct usb_proc_msg hdr; 94 struct ugold_softc *sc; 95 }; 96 97 struct ugold_softc { 98 struct usb_device *sc_udev; 99 struct usb_xfer *sc_xfer[UGOLD_N_TRANSFER]; 100 101 struct callout sc_callout; 102 struct mtx sc_mtx; 103 struct ugold_readout_msg sc_readout_msg[2]; 104 105 int sc_num_sensors; 106 int sc_sensor[UGOLD_MAX_SENSORS]; 107 int sc_calib[UGOLD_MAX_SENSORS]; 108 int sc_valid[UGOLD_MAX_SENSORS]; 109 uint8_t sc_report_id; 110 uint8_t sc_iface_index[2]; 111 }; 112 113 /* prototypes */ 114 115 static device_probe_t ugold_probe; 116 static device_attach_t ugold_attach; 117 static device_detach_t ugold_detach; 118 119 static usb_proc_callback_t ugold_readout_msg; 120 121 static usb_callback_t ugold_intr_callback; 122 123 static devclass_t ugold_devclass; 124 125 static device_method_t ugold_methods[] = { 126 DEVMETHOD(device_probe, ugold_probe), 127 DEVMETHOD(device_attach, ugold_attach), 128 DEVMETHOD(device_detach, ugold_detach), 129 130 DEVMETHOD_END 131 }; 132 133 static driver_t ugold_driver = { 134 .name = "ugold", 135 .methods = ugold_methods, 136 .size = sizeof(struct ugold_softc), 137 }; 138 139 static const STRUCT_USB_HOST_ID ugold_devs[] = { 140 {USB_VPI(USB_VENDOR_CHICONY2, USB_PRODUCT_CHICONY2_TEMPER, 0)}, 141 }; 142 143 DRIVER_MODULE(ugold, uhub, ugold_driver, ugold_devclass, NULL, NULL); 144 MODULE_DEPEND(ugold, usb, 1, 1, 1); 145 MODULE_VERSION(ugold, 1); 146 USB_PNP_HOST_INFO(ugold_devs); 147 148 static const struct usb_config ugold_config[UGOLD_N_TRANSFER] = { 149 150 [UGOLD_INTR_DT] = { 151 .type = UE_INTERRUPT, 152 .endpoint = UE_ADDR_ANY, 153 .direction = UE_DIR_IN, 154 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 155 .bufsize = 0, /* use wMaxPacketSize */ 156 .callback = &ugold_intr_callback, 157 .if_index = 1, 158 }, 159 }; 160 161 static void 162 ugold_timeout(void *arg) 163 { 164 struct ugold_softc *sc = arg; 165 166 usb_proc_explore_lock(sc->sc_udev); 167 (void)usb_proc_explore_msignal(sc->sc_udev, 168 &sc->sc_readout_msg[0], &sc->sc_readout_msg[1]); 169 usb_proc_explore_unlock(sc->sc_udev); 170 171 callout_reset(&sc->sc_callout, 6 * hz, &ugold_timeout, sc); 172 } 173 174 static int 175 ugold_probe(device_t dev) 176 { 177 struct usb_attach_arg *uaa; 178 179 uaa = device_get_ivars(dev); 180 if (uaa->usb_mode != USB_MODE_HOST) 181 return (ENXIO); 182 if (uaa->info.bInterfaceClass != UICLASS_HID) 183 return (ENXIO); 184 if (uaa->info.bIfaceIndex != 0) 185 return (ENXIO); 186 187 return (usbd_lookup_id_by_uaa(ugold_devs, sizeof(ugold_devs), uaa)); 188 } 189 190 static int 191 ugold_attach(device_t dev) 192 { 193 struct ugold_softc *sc = device_get_softc(dev); 194 struct usb_attach_arg *uaa = device_get_ivars(dev); 195 struct sysctl_oid *sensor_tree; 196 uint16_t d_len; 197 void *d_ptr; 198 int error; 199 int i; 200 201 sc->sc_udev = uaa->device; 202 sc->sc_readout_msg[0].hdr.pm_callback = &ugold_readout_msg; 203 sc->sc_readout_msg[0].sc = sc; 204 sc->sc_readout_msg[1].hdr.pm_callback = &ugold_readout_msg; 205 sc->sc_readout_msg[1].sc = sc; 206 sc->sc_iface_index[0] = uaa->info.bIfaceIndex; 207 sc->sc_iface_index[1] = uaa->info.bIfaceIndex + 1; 208 209 device_set_usb_desc(dev); 210 mtx_init(&sc->sc_mtx, "ugold lock", NULL, MTX_DEF | MTX_RECURSE); 211 callout_init_mtx(&sc->sc_callout, &sc->sc_mtx, 0); 212 213 /* grab all interfaces from other drivers */ 214 for (i = 0;; i++) { 215 if (i == uaa->info.bIfaceIndex) 216 continue; 217 if (usbd_get_iface(uaa->device, i) == NULL) 218 break; 219 220 usbd_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex); 221 } 222 223 /* figure out report ID */ 224 error = usbd_req_get_hid_desc(uaa->device, NULL, 225 &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); 226 227 if (error) 228 goto detach; 229 230 (void)hid_report_size(d_ptr, d_len, hid_input, &sc->sc_report_id); 231 232 free(d_ptr, M_TEMP); 233 234 error = usbd_transfer_setup(uaa->device, 235 sc->sc_iface_index, sc->sc_xfer, ugold_config, 236 UGOLD_N_TRANSFER, sc, &sc->sc_mtx); 237 if (error) 238 goto detach; 239 240 sensor_tree = SYSCTL_ADD_NODE(device_get_sysctl_ctx(dev), 241 SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, "sensors", 242 CTLFLAG_RD, NULL, ""); 243 244 if (sensor_tree == NULL) { 245 error = ENOMEM; 246 goto detach; 247 } 248 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 249 SYSCTL_CHILDREN(sensor_tree), 250 OID_AUTO, "inner", CTLFLAG_RD, &sc->sc_sensor[UGOLD_INNER], 0, 251 "Inner temperature in microCelcius"); 252 253 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 254 SYSCTL_CHILDREN(sensor_tree), 255 OID_AUTO, "inner_valid", CTLFLAG_RD, &sc->sc_valid[UGOLD_INNER], 0, 256 "Inner temperature is valid"); 257 258 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 259 SYSCTL_CHILDREN(sensor_tree), 260 OID_AUTO, "inner_calib", CTLFLAG_RWTUN, &sc->sc_calib[UGOLD_INNER], 0, 261 "Inner calibration temperature in microCelcius"); 262 263 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 264 SYSCTL_CHILDREN(sensor_tree), 265 OID_AUTO, "outer", CTLFLAG_RD, &sc->sc_sensor[UGOLD_OUTER], 0, 266 "Outer temperature in microCelcius"); 267 268 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 269 SYSCTL_CHILDREN(sensor_tree), 270 OID_AUTO, "outer_calib", CTLFLAG_RWTUN, &sc->sc_calib[UGOLD_OUTER], 0, 271 "Outer calibration temperature in microCelcius"); 272 273 SYSCTL_ADD_INT(device_get_sysctl_ctx(dev), 274 SYSCTL_CHILDREN(sensor_tree), 275 OID_AUTO, "outer_valid", CTLFLAG_RD, &sc->sc_valid[UGOLD_OUTER], 0, 276 "Outer temperature is valid"); 277 278 mtx_lock(&sc->sc_mtx); 279 usbd_transfer_start(sc->sc_xfer[UGOLD_INTR_DT]); 280 ugold_timeout(sc); 281 mtx_unlock(&sc->sc_mtx); 282 283 return (0); 284 285 detach: 286 DPRINTF("error=%s\n", usbd_errstr(error)); 287 ugold_detach(dev); 288 return (error); 289 } 290 291 static int 292 ugold_detach(device_t dev) 293 { 294 struct ugold_softc *sc = device_get_softc(dev); 295 296 callout_drain(&sc->sc_callout); 297 298 usb_proc_explore_lock(sc->sc_udev); 299 usb_proc_explore_mwait(sc->sc_udev, 300 &sc->sc_readout_msg[0], &sc->sc_readout_msg[1]); 301 usb_proc_explore_unlock(sc->sc_udev); 302 303 usbd_transfer_unsetup(sc->sc_xfer, UGOLD_N_TRANSFER); 304 305 mtx_destroy(&sc->sc_mtx); 306 307 return (0); 308 } 309 310 static int 311 ugold_ds75_temp(uint8_t msb, uint8_t lsb) 312 { 313 /* DS75: 12bit precision mode : 0.0625 degrees Celsius ticks */ 314 /* NOTE: MSB has a sign bit for negative temperatures */ 315 int32_t temp = (msb << 24) | ((lsb & 0xF0) << 16); 316 return (((int64_t)temp * (int64_t)1000000LL) >> 24); 317 } 318 319 320 static void 321 ugold_intr_callback(struct usb_xfer *xfer, usb_error_t error) 322 { 323 struct ugold_softc *sc = usbd_xfer_softc(xfer); 324 struct usb_page_cache *pc; 325 uint8_t buf[8]; 326 int temp; 327 int len; 328 329 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 330 331 switch (USB_GET_STATE(xfer)) { 332 case USB_ST_TRANSFERRED: 333 memset(buf, 0, sizeof(buf)); 334 335 pc = usbd_xfer_get_frame(xfer, 0); 336 usbd_copy_out(pc, 0, buf, MIN(len, sizeof(buf))); 337 338 switch (buf[0]) { 339 case UGOLD_CMD_INIT: 340 if (sc->sc_num_sensors) 341 break; 342 343 sc->sc_num_sensors = MIN(buf[1], UGOLD_MAX_SENSORS) /* XXX */ ; 344 345 DPRINTF("%d sensor%s type ds75/12bit (temperature)\n", 346 sc->sc_num_sensors, (sc->sc_num_sensors == 1) ? "" : "s"); 347 break; 348 case UGOLD_CMD_DATA: 349 switch (buf[1]) { 350 case 4: 351 temp = ugold_ds75_temp(buf[4], buf[5]); 352 sc->sc_sensor[UGOLD_OUTER] = temp + sc->sc_calib[UGOLD_OUTER]; 353 sc->sc_valid[UGOLD_OUTER] = 1; 354 /* FALLTHROUGH */ 355 case 2: 356 temp = ugold_ds75_temp(buf[2], buf[3]); 357 sc->sc_sensor[UGOLD_INNER] = temp + sc->sc_calib[UGOLD_INNER]; 358 sc->sc_valid[UGOLD_INNER] = 1; 359 break; 360 default: 361 DPRINTF("invalid data length (%d bytes)\n", buf[1]); 362 } 363 break; 364 default: 365 DPRINTF("unknown command 0x%02x\n", buf[0]); 366 break; 367 } 368 /* FALLTHROUGH */ 369 case USB_ST_SETUP: 370 tr_setup: 371 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 372 usbd_transfer_submit(xfer); 373 break; 374 default: /* Error */ 375 if (error != USB_ERR_CANCELLED) { 376 /* try clear stall first */ 377 usbd_xfer_set_stall(xfer); 378 goto tr_setup; 379 } 380 break; 381 } 382 } 383 384 static int 385 ugold_issue_cmd(struct ugold_softc *sc, uint8_t *cmd, int len) 386 { 387 return (usbd_req_set_report(sc->sc_udev, &sc->sc_mtx, cmd, len, 388 sc->sc_iface_index[1], UHID_OUTPUT_REPORT, sc->sc_report_id)); 389 } 390 391 static void 392 ugold_readout_msg(struct usb_proc_msg *pm) 393 { 394 struct ugold_softc *sc = ((struct ugold_readout_msg *)pm)->sc; 395 396 usb_proc_explore_unlock(sc->sc_udev); 397 398 mtx_lock(&sc->sc_mtx); 399 if (sc->sc_num_sensors == 0) 400 ugold_issue_cmd(sc, cmd_init, sizeof(cmd_init)); 401 402 ugold_issue_cmd(sc, cmd_data, sizeof(cmd_data)); 403 mtx_unlock(&sc->sc_mtx); 404 405 usb_proc_explore_lock(sc->sc_udev); 406 } 407