1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2012 Huang Wen Hui 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 #include <sys/cdefs.h> 30 #include "opt_evdev.h" 31 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/kernel.h> 35 #include <sys/malloc.h> 36 #include <sys/module.h> 37 #include <sys/lock.h> 38 #include <sys/mutex.h> 39 #include <sys/bus.h> 40 #include <sys/conf.h> 41 #include <sys/fcntl.h> 42 #include <sys/file.h> 43 #include <sys/selinfo.h> 44 #include <sys/poll.h> 45 #include <sys/sysctl.h> 46 47 #include <dev/hid/hid.h> 48 49 #include <dev/usb/usb.h> 50 #include <dev/usb/usbdi.h> 51 #include <dev/usb/usbdi_util.h> 52 #include <dev/usb/usbhid.h> 53 54 #include "usbdevs.h" 55 56 #define USB_DEBUG_VAR wsp_debug 57 #include <dev/usb/usb_debug.h> 58 59 #ifdef EVDEV_SUPPORT 60 #include <dev/evdev/input.h> 61 #include <dev/evdev/evdev.h> 62 #endif 63 64 #include <sys/mouse.h> 65 66 #define WSP_DRIVER_NAME "wsp" 67 #define WSP_BUFFER_MAX 1024 68 69 #define WSP_CLAMP(x,low,high) do { \ 70 if ((x) < (low)) \ 71 (x) = (low); \ 72 else if ((x) > (high)) \ 73 (x) = (high); \ 74 } while (0) 75 76 /* Tunables */ 77 static SYSCTL_NODE(_hw_usb, OID_AUTO, wsp, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 78 "USB wsp"); 79 80 #ifdef USB_DEBUG 81 enum wsp_log_level { 82 WSP_LLEVEL_DISABLED = 0, 83 WSP_LLEVEL_ERROR, 84 WSP_LLEVEL_DEBUG, /* for troubleshooting */ 85 WSP_LLEVEL_INFO, /* for diagnostics */ 86 }; 87 static int wsp_debug = WSP_LLEVEL_ERROR;/* the default is to only log errors */ 88 89 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, debug, CTLFLAG_RWTUN, 90 &wsp_debug, WSP_LLEVEL_ERROR, "WSP debug level"); 91 #endif /* USB_DEBUG */ 92 93 static struct wsp_tuning { 94 int scale_factor; 95 int z_factor; 96 int z_invert; 97 int pressure_touch_threshold; 98 int pressure_untouch_threshold; 99 int pressure_tap_threshold; 100 int scr_hor_threshold; 101 int enable_single_tap_clicks; 102 } 103 wsp_tuning = 104 { 105 .scale_factor = 12, 106 .z_factor = 5, 107 .z_invert = 0, 108 .pressure_touch_threshold = 50, 109 .pressure_untouch_threshold = 10, 110 .pressure_tap_threshold = 120, 111 .scr_hor_threshold = 20, 112 .enable_single_tap_clicks = 1, 113 }; 114 115 static void 116 wsp_runing_rangecheck(struct wsp_tuning *ptun) 117 { 118 WSP_CLAMP(ptun->scale_factor, 1, 63); 119 WSP_CLAMP(ptun->z_factor, 1, 63); 120 WSP_CLAMP(ptun->z_invert, 0, 1); 121 WSP_CLAMP(ptun->pressure_touch_threshold, 1, 255); 122 WSP_CLAMP(ptun->pressure_untouch_threshold, 1, 255); 123 WSP_CLAMP(ptun->pressure_tap_threshold, 1, 255); 124 WSP_CLAMP(ptun->scr_hor_threshold, 1, 255); 125 WSP_CLAMP(ptun->enable_single_tap_clicks, 0, 1); 126 } 127 128 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scale_factor, CTLFLAG_RWTUN, 129 &wsp_tuning.scale_factor, 0, "movement scale factor"); 130 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, z_factor, CTLFLAG_RWTUN, 131 &wsp_tuning.z_factor, 0, "Z-axis scale factor"); 132 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, z_invert, CTLFLAG_RWTUN, 133 &wsp_tuning.z_invert, 0, "enable Z-axis inversion"); 134 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_touch_threshold, CTLFLAG_RWTUN, 135 &wsp_tuning.pressure_touch_threshold, 0, "touch pressure threshold"); 136 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_untouch_threshold, CTLFLAG_RWTUN, 137 &wsp_tuning.pressure_untouch_threshold, 0, "untouch pressure threshold"); 138 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_tap_threshold, CTLFLAG_RWTUN, 139 &wsp_tuning.pressure_tap_threshold, 0, "tap pressure threshold"); 140 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scr_hor_threshold, CTLFLAG_RWTUN, 141 &wsp_tuning.scr_hor_threshold, 0, "horizontal scrolling threshold"); 142 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, enable_single_tap_clicks, CTLFLAG_RWTUN, 143 &wsp_tuning.enable_single_tap_clicks, 0, "enable single tap clicks"); 144 145 /* 146 * Some tables, structures, definitions and constant values for the 147 * touchpad protocol has been copied from Linux's 148 * "drivers/input/mouse/bcm5974.c" which has the following copyright 149 * holders under GPLv2. All device specific code in this driver has 150 * been written from scratch. The decoding algorithm is based on 151 * output from FreeBSD's usbdump. 152 * 153 * Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se) 154 * Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) 155 * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) 156 * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) 157 * Copyright (C) 2005 Stelian Pop (stelian@popies.net) 158 * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) 159 * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) 160 * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) 161 * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) 162 */ 163 164 /* button data structure */ 165 struct bt_data { 166 uint8_t unknown1; /* constant */ 167 uint8_t button; /* left button */ 168 uint8_t rel_x; /* relative x coordinate */ 169 uint8_t rel_y; /* relative y coordinate */ 170 } __packed; 171 172 /* trackpad header types */ 173 enum tp_type { 174 TYPE1, /* plain trackpad */ 175 TYPE2, /* button integrated in trackpad */ 176 TYPE3, /* additional header fields since June 2013 */ 177 TYPE4, /* additional header field for pressure data */ 178 TYPE_CNT 179 }; 180 181 /* trackpad finger data offsets, le16-aligned */ 182 #define FINGER_TYPE1 (13 * 2) 183 #define FINGER_TYPE2 (15 * 2) 184 #define FINGER_TYPE3 (19 * 2) 185 #define FINGER_TYPE4 (23 * 2) 186 187 /* trackpad button data offsets */ 188 #define BUTTON_TYPE2 15 189 #define BUTTON_TYPE3 23 190 #define BUTTON_TYPE4 31 191 192 /* list of device capability bits */ 193 #define HAS_INTEGRATED_BUTTON 1 194 195 /* trackpad finger data block size */ 196 #define FSIZE_TYPE1 (14 * 2) 197 #define FSIZE_TYPE2 (14 * 2) 198 #define FSIZE_TYPE3 (14 * 2) 199 #define FSIZE_TYPE4 (15 * 2) 200 201 struct wsp_tp { 202 uint8_t caps; /* device capability bitmask */ 203 uint8_t button; /* offset to button data */ 204 uint8_t offset; /* offset to trackpad finger data */ 205 uint8_t fsize; /* bytes in single finger block */ 206 uint8_t delta; /* offset from header to finger struct */ 207 uint8_t iface_index; 208 uint8_t um_size; /* usb control message length */ 209 uint8_t um_req_idx; /* usb control message index */ 210 uint8_t um_switch_idx; /* usb control message mode switch index */ 211 uint8_t um_switch_on; /* usb control message mode switch on */ 212 uint8_t um_switch_off; /* usb control message mode switch off */ 213 } const static wsp_tp[TYPE_CNT] = { 214 [TYPE1] = { 215 .caps = 0, 216 .button = 0, 217 .offset = FINGER_TYPE1, 218 .fsize = FSIZE_TYPE1, 219 .delta = 0, 220 .iface_index = 0, 221 .um_size = 8, 222 .um_req_idx = 0x00, 223 .um_switch_idx = 0, 224 .um_switch_on = 0x01, 225 .um_switch_off = 0x08, 226 }, 227 [TYPE2] = { 228 .caps = HAS_INTEGRATED_BUTTON, 229 .button = BUTTON_TYPE2, 230 .offset = FINGER_TYPE2, 231 .fsize = FSIZE_TYPE2, 232 .delta = 0, 233 .iface_index = 0, 234 .um_size = 8, 235 .um_req_idx = 0x00, 236 .um_switch_idx = 0, 237 .um_switch_on = 0x01, 238 .um_switch_off = 0x08, 239 }, 240 [TYPE3] = { 241 .caps = HAS_INTEGRATED_BUTTON, 242 .button = BUTTON_TYPE3, 243 .offset = FINGER_TYPE3, 244 .fsize = FSIZE_TYPE3, 245 .delta = 0, 246 }, 247 [TYPE4] = { 248 .caps = HAS_INTEGRATED_BUTTON, 249 .button = BUTTON_TYPE4, 250 .offset = FINGER_TYPE4, 251 .fsize = FSIZE_TYPE4, 252 .delta = 2, 253 .iface_index = 2, 254 .um_size = 2, 255 .um_req_idx = 0x02, 256 .um_switch_idx = 1, 257 .um_switch_on = 0x01, 258 .um_switch_off = 0x00, 259 }, 260 }; 261 262 /* trackpad finger header - little endian */ 263 struct tp_header { 264 uint8_t flag; 265 uint8_t sn0; 266 uint16_t wFixed0; 267 uint32_t dwSn1; 268 uint32_t dwFixed1; 269 uint16_t wLength; 270 uint8_t nfinger; 271 uint8_t ibt; 272 int16_t wUnknown[6]; 273 uint8_t q1; 274 uint8_t q2; 275 } __packed; 276 277 /* trackpad finger structure - little endian */ 278 struct tp_finger { 279 int16_t origin; /* zero when switching track finger */ 280 int16_t abs_x; /* absolute x coodinate */ 281 int16_t abs_y; /* absolute y coodinate */ 282 int16_t rel_x; /* relative x coodinate */ 283 int16_t rel_y; /* relative y coodinate */ 284 int16_t tool_major; /* tool area, major axis */ 285 int16_t tool_minor; /* tool area, minor axis */ 286 int16_t orientation; /* 16384 when point, else 15 bit angle */ 287 int16_t touch_major; /* touch area, major axis */ 288 int16_t touch_minor; /* touch area, minor axis */ 289 int16_t unused[2]; /* zeros */ 290 int16_t pressure; /* pressure on forcetouch touchpad */ 291 int16_t multi; /* one finger: varies, more fingers: 292 * constant */ 293 } __packed; 294 295 /* trackpad finger data size, empirically at least ten fingers */ 296 #ifdef EVDEV_SUPPORT 297 #define MAX_FINGERS MAX_MT_SLOTS 298 #else 299 #define MAX_FINGERS 16 300 #endif 301 #define SIZEOF_FINGER sizeof(struct tp_finger) 302 #define SIZEOF_ALL_FINGERS (MAX_FINGERS * SIZEOF_FINGER) 303 #define MAX_FINGER_ORIENTATION 16384 304 305 #if (WSP_BUFFER_MAX < ((MAX_FINGERS * FSIZE_TYPE4) + FINGER_TYPE4)) 306 #error "WSP_BUFFER_MAX is too small" 307 #endif 308 309 enum { 310 WSP_FLAG_WELLSPRING1, 311 WSP_FLAG_WELLSPRING2, 312 WSP_FLAG_WELLSPRING3, 313 WSP_FLAG_WELLSPRING4, 314 WSP_FLAG_WELLSPRING4A, 315 WSP_FLAG_WELLSPRING5, 316 WSP_FLAG_WELLSPRING6A, 317 WSP_FLAG_WELLSPRING6, 318 WSP_FLAG_WELLSPRING5A, 319 WSP_FLAG_WELLSPRING7, 320 WSP_FLAG_WELLSPRING7A, 321 WSP_FLAG_WELLSPRING8, 322 WSP_FLAG_WELLSPRING9, 323 WSP_FLAG_MAX, 324 }; 325 326 /* device-specific parameters */ 327 struct wsp_param { 328 int snratio; /* signal-to-noise ratio */ 329 int min; /* device minimum reading */ 330 int max; /* device maximum reading */ 331 int size; /* physical size, mm */ 332 }; 333 334 /* device-specific configuration */ 335 struct wsp_dev_params { 336 const struct wsp_tp* tp; 337 struct wsp_param p; /* finger pressure limits */ 338 struct wsp_param w; /* finger width limits */ 339 struct wsp_param x; /* horizontal limits */ 340 struct wsp_param y; /* vertical limits */ 341 struct wsp_param o; /* orientation limits */ 342 }; 343 344 /* logical signal quality */ 345 #define SN_PRESSURE 45 /* pressure signal-to-noise ratio */ 346 #define SN_WIDTH 25 /* width signal-to-noise ratio */ 347 #define SN_COORD 250 /* coordinate signal-to-noise ratio */ 348 #define SN_ORIENT 10 /* orientation signal-to-noise ratio */ 349 350 static const struct wsp_dev_params wsp_dev_params[WSP_FLAG_MAX] = { 351 [WSP_FLAG_WELLSPRING1] = { 352 .tp = wsp_tp + TYPE1, 353 .p = { SN_PRESSURE, 0, 256, 0 }, 354 .w = { SN_WIDTH, 0, 2048, 0 }, 355 .x = { SN_COORD, -4824, 5342, 105 }, 356 .y = { SN_COORD, -172, 5820, 75 }, 357 .o = { SN_ORIENT, 358 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 359 }, 360 [WSP_FLAG_WELLSPRING2] = { 361 .tp = wsp_tp + TYPE1, 362 .p = { SN_PRESSURE, 0, 256, 0 }, 363 .w = { SN_WIDTH, 0, 2048, 0 }, 364 .x = { SN_COORD, -4824, 4824, 105 }, 365 .y = { SN_COORD, -172, 4290, 75 }, 366 .o = { SN_ORIENT, 367 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 368 }, 369 [WSP_FLAG_WELLSPRING3] = { 370 .tp = wsp_tp + TYPE2, 371 .p = { SN_PRESSURE, 0, 300, 0 }, 372 .w = { SN_WIDTH, 0, 2048, 0 }, 373 .x = { SN_COORD, -4460, 5166, 105 }, 374 .y = { SN_COORD, -75, 6700, 75 }, 375 .o = { SN_ORIENT, 376 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 377 }, 378 [WSP_FLAG_WELLSPRING4] = { 379 .tp = wsp_tp + TYPE2, 380 .p = { SN_PRESSURE, 0, 300, 0 }, 381 .w = { SN_WIDTH, 0, 2048, 0 }, 382 .x = { SN_COORD, -4620, 5140, 105 }, 383 .y = { SN_COORD, -150, 6600, 75 }, 384 .o = { SN_ORIENT, 385 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 386 }, 387 [WSP_FLAG_WELLSPRING4A] = { 388 .tp = wsp_tp + TYPE2, 389 .p = { SN_PRESSURE, 0, 300, 0 }, 390 .w = { SN_WIDTH, 0, 2048, 0 }, 391 .x = { SN_COORD, -4616, 5112, 105 }, 392 .y = { SN_COORD, -142, 5234, 75 }, 393 .o = { SN_ORIENT, 394 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 395 }, 396 [WSP_FLAG_WELLSPRING5] = { 397 .tp = wsp_tp + TYPE2, 398 .p = { SN_PRESSURE, 0, 300, 0 }, 399 .w = { SN_WIDTH, 0, 2048, 0 }, 400 .x = { SN_COORD, -4415, 5050, 105 }, 401 .y = { SN_COORD, -55, 6680, 75 }, 402 .o = { SN_ORIENT, 403 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 404 }, 405 [WSP_FLAG_WELLSPRING6] = { 406 .tp = wsp_tp + TYPE2, 407 .p = { SN_PRESSURE, 0, 300, 0 }, 408 .w = { SN_WIDTH, 0, 2048, 0 }, 409 .x = { SN_COORD, -4620, 5140, 105 }, 410 .y = { SN_COORD, -150, 6600, 75 }, 411 .o = { SN_ORIENT, 412 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 413 }, 414 [WSP_FLAG_WELLSPRING5A] = { 415 .tp = wsp_tp + TYPE2, 416 .p = { SN_PRESSURE, 0, 300, 0 }, 417 .w = { SN_WIDTH, 0, 2048, 0 }, 418 .x = { SN_COORD, -4750, 5280, 105 }, 419 .y = { SN_COORD, -150, 6730, 75 }, 420 .o = { SN_ORIENT, 421 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 422 }, 423 [WSP_FLAG_WELLSPRING6A] = { 424 .tp = wsp_tp + TYPE2, 425 .p = { SN_PRESSURE, 0, 300, 0 }, 426 .w = { SN_WIDTH, 0, 2048, 0 }, 427 .x = { SN_COORD, -4620, 5140, 105 }, 428 .y = { SN_COORD, -150, 6600, 75 }, 429 .o = { SN_ORIENT, 430 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 431 }, 432 [WSP_FLAG_WELLSPRING7] = { 433 .tp = wsp_tp + TYPE2, 434 .p = { SN_PRESSURE, 0, 300, 0 }, 435 .w = { SN_WIDTH, 0, 2048, 0 }, 436 .x = { SN_COORD, -4750, 5280, 105 }, 437 .y = { SN_COORD, -150, 6730, 75 }, 438 .o = { SN_ORIENT, 439 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 440 }, 441 [WSP_FLAG_WELLSPRING7A] = { 442 .tp = wsp_tp + TYPE2, 443 .p = { SN_PRESSURE, 0, 300, 0 }, 444 .w = { SN_WIDTH, 0, 2048, 0 }, 445 .x = { SN_COORD, -4750, 5280, 105 }, 446 .y = { SN_COORD, -150, 6730, 75 }, 447 .o = { SN_ORIENT, 448 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 449 }, 450 [WSP_FLAG_WELLSPRING8] = { 451 .tp = wsp_tp + TYPE3, 452 .p = { SN_PRESSURE, 0, 300, 0 }, 453 .w = { SN_WIDTH, 0, 2048, 0 }, 454 .x = { SN_COORD, -4620, 5140, 105 }, 455 .y = { SN_COORD, -150, 6600, 75 }, 456 .o = { SN_ORIENT, 457 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 458 }, 459 [WSP_FLAG_WELLSPRING9] = { 460 .tp = wsp_tp + TYPE4, 461 .p = { SN_PRESSURE, 0, 300, 0 }, 462 .w = { SN_WIDTH, 0, 2048, 0 }, 463 .x = { SN_COORD, -4828, 5345, 105 }, 464 .y = { SN_COORD, -203, 6803, 75 }, 465 .o = { SN_ORIENT, 466 -MAX_FINGER_ORIENTATION, MAX_FINGER_ORIENTATION, 0 }, 467 }, 468 }; 469 #define WSP_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) } 470 471 static const STRUCT_USB_HOST_ID wsp_devs[] = { 472 /* MacbookAir1.1 */ 473 WSP_DEV(APPLE, WELLSPRING_ANSI, WSP_FLAG_WELLSPRING1), 474 WSP_DEV(APPLE, WELLSPRING_ISO, WSP_FLAG_WELLSPRING1), 475 WSP_DEV(APPLE, WELLSPRING_JIS, WSP_FLAG_WELLSPRING1), 476 477 /* MacbookProPenryn, aka wellspring2 */ 478 WSP_DEV(APPLE, WELLSPRING2_ANSI, WSP_FLAG_WELLSPRING2), 479 WSP_DEV(APPLE, WELLSPRING2_ISO, WSP_FLAG_WELLSPRING2), 480 WSP_DEV(APPLE, WELLSPRING2_JIS, WSP_FLAG_WELLSPRING2), 481 482 /* Macbook5,1 (unibody), aka wellspring3 */ 483 WSP_DEV(APPLE, WELLSPRING3_ANSI, WSP_FLAG_WELLSPRING3), 484 WSP_DEV(APPLE, WELLSPRING3_ISO, WSP_FLAG_WELLSPRING3), 485 WSP_DEV(APPLE, WELLSPRING3_JIS, WSP_FLAG_WELLSPRING3), 486 487 /* MacbookAir3,2 (unibody), aka wellspring4 */ 488 WSP_DEV(APPLE, WELLSPRING4_ANSI, WSP_FLAG_WELLSPRING4), 489 WSP_DEV(APPLE, WELLSPRING4_ISO, WSP_FLAG_WELLSPRING4), 490 WSP_DEV(APPLE, WELLSPRING4_JIS, WSP_FLAG_WELLSPRING4), 491 492 /* MacbookAir3,1 (unibody), aka wellspring4 */ 493 WSP_DEV(APPLE, WELLSPRING4A_ANSI, WSP_FLAG_WELLSPRING4A), 494 WSP_DEV(APPLE, WELLSPRING4A_ISO, WSP_FLAG_WELLSPRING4A), 495 WSP_DEV(APPLE, WELLSPRING4A_JIS, WSP_FLAG_WELLSPRING4A), 496 497 /* Macbook8 (unibody, March 2011) */ 498 WSP_DEV(APPLE, WELLSPRING5_ANSI, WSP_FLAG_WELLSPRING5), 499 WSP_DEV(APPLE, WELLSPRING5_ISO, WSP_FLAG_WELLSPRING5), 500 WSP_DEV(APPLE, WELLSPRING5_JIS, WSP_FLAG_WELLSPRING5), 501 502 /* MacbookAir4,1 (unibody, July 2011) */ 503 WSP_DEV(APPLE, WELLSPRING6A_ANSI, WSP_FLAG_WELLSPRING6A), 504 WSP_DEV(APPLE, WELLSPRING6A_ISO, WSP_FLAG_WELLSPRING6A), 505 WSP_DEV(APPLE, WELLSPRING6A_JIS, WSP_FLAG_WELLSPRING6A), 506 507 /* MacbookAir4,2 (unibody, July 2011) */ 508 WSP_DEV(APPLE, WELLSPRING6_ANSI, WSP_FLAG_WELLSPRING6), 509 WSP_DEV(APPLE, WELLSPRING6_ISO, WSP_FLAG_WELLSPRING6), 510 WSP_DEV(APPLE, WELLSPRING6_JIS, WSP_FLAG_WELLSPRING6), 511 512 /* Macbook8,2 (unibody) */ 513 WSP_DEV(APPLE, WELLSPRING5A_ANSI, WSP_FLAG_WELLSPRING5A), 514 WSP_DEV(APPLE, WELLSPRING5A_ISO, WSP_FLAG_WELLSPRING5A), 515 WSP_DEV(APPLE, WELLSPRING5A_JIS, WSP_FLAG_WELLSPRING5A), 516 517 /* MacbookPro10,1 (unibody, June 2012) */ 518 /* MacbookPro11,1-3 (unibody, June 2013) */ 519 WSP_DEV(APPLE, WELLSPRING7_ANSI, WSP_FLAG_WELLSPRING7), 520 WSP_DEV(APPLE, WELLSPRING7_ISO, WSP_FLAG_WELLSPRING7), 521 WSP_DEV(APPLE, WELLSPRING7_JIS, WSP_FLAG_WELLSPRING7), 522 523 /* MacbookPro10,2 (unibody, October 2012) */ 524 WSP_DEV(APPLE, WELLSPRING7A_ANSI, WSP_FLAG_WELLSPRING7A), 525 WSP_DEV(APPLE, WELLSPRING7A_ISO, WSP_FLAG_WELLSPRING7A), 526 WSP_DEV(APPLE, WELLSPRING7A_JIS, WSP_FLAG_WELLSPRING7A), 527 528 /* MacbookAir6,2 (unibody, June 2013) */ 529 WSP_DEV(APPLE, WELLSPRING8_ANSI, WSP_FLAG_WELLSPRING8), 530 WSP_DEV(APPLE, WELLSPRING8_ISO, WSP_FLAG_WELLSPRING8), 531 WSP_DEV(APPLE, WELLSPRING8_JIS, WSP_FLAG_WELLSPRING8), 532 533 /* MacbookPro12,1 MacbookPro11,4 */ 534 WSP_DEV(APPLE, WELLSPRING9_ANSI, WSP_FLAG_WELLSPRING9), 535 WSP_DEV(APPLE, WELLSPRING9_ISO, WSP_FLAG_WELLSPRING9), 536 WSP_DEV(APPLE, WELLSPRING9_JIS, WSP_FLAG_WELLSPRING9), 537 }; 538 539 #define WSP_FIFO_BUF_SIZE 8 /* bytes */ 540 #define WSP_FIFO_QUEUE_MAXLEN 50 /* units */ 541 542 enum { 543 WSP_INTR_DT, 544 WSP_N_TRANSFER, 545 }; 546 547 struct wsp_softc { 548 struct usb_device *sc_usb_device; 549 struct mtx sc_mutex; /* for synchronization */ 550 struct usb_xfer *sc_xfer[WSP_N_TRANSFER]; 551 struct usb_fifo_sc sc_fifo; 552 553 const struct wsp_dev_params *sc_params; /* device configuration */ 554 555 #ifdef EVDEV_SUPPORT 556 struct evdev_dev *sc_evdev; 557 #endif 558 mousehw_t sc_hw; 559 mousemode_t sc_mode; 560 u_int sc_pollrate; 561 mousestatus_t sc_status; 562 int sc_fflags; 563 u_int sc_state; 564 #define WSP_ENABLED 0x01 565 #define WSP_EVDEV_OPENED 0x02 566 567 struct tp_finger *index[MAX_FINGERS]; /* finger index data */ 568 int16_t pos_x[MAX_FINGERS]; /* position array */ 569 int16_t pos_y[MAX_FINGERS]; /* position array */ 570 u_int sc_touch; /* touch status */ 571 #define WSP_UNTOUCH 0x00 572 #define WSP_FIRST_TOUCH 0x01 573 #define WSP_SECOND_TOUCH 0x02 574 #define WSP_TOUCHING 0x04 575 int16_t pre_pos_x; /* previous position array */ 576 int16_t pre_pos_y; /* previous position array */ 577 int dx_sum; /* x axis cumulative movement */ 578 int dy_sum; /* y axis cumulative movement */ 579 int dz_sum; /* z axis cumulative movement */ 580 int dz_count; 581 #define WSP_DZ_MAX_COUNT 32 582 int dt_sum; /* T-axis cumulative movement */ 583 int rdx; /* x axis remainder of divide by scale_factor */ 584 int rdy; /* y axis remainder of divide by scale_factor */ 585 int rdz; /* z axis remainder of divide by scale_factor */ 586 int tp_datalen; 587 uint8_t o_ntouch; /* old touch finger status */ 588 uint8_t finger; /* 0 or 1 *, check which finger moving */ 589 uint16_t intr_count; 590 #define WSP_TAP_THRESHOLD 3 591 #define WSP_TAP_MAX_COUNT 20 592 int distance; /* the distance of 2 fingers */ 593 #define MAX_DISTANCE 2500 /* the max allowed distance */ 594 uint8_t ibtn; /* button status in tapping */ 595 uint8_t ntaps; /* finger status in tapping */ 596 uint8_t scr_mode; /* scroll status in movement */ 597 #define WSP_SCR_NONE 0 598 #define WSP_SCR_VER 1 599 #define WSP_SCR_HOR 2 600 uint8_t tp_data[WSP_BUFFER_MAX] __aligned(4); /* trackpad transferred data */ 601 }; 602 603 /* 604 * function prototypes 605 */ 606 static usb_fifo_cmd_t wsp_fifo_start_read; 607 static usb_fifo_cmd_t wsp_fifo_stop_read; 608 static usb_fifo_open_t wsp_open; 609 static usb_fifo_close_t wsp_close; 610 static usb_fifo_ioctl_t wsp_ioctl; 611 612 static struct usb_fifo_methods wsp_fifo_methods = { 613 .f_open = &wsp_open, 614 .f_close = &wsp_close, 615 .f_ioctl = &wsp_ioctl, 616 .f_start_read = &wsp_fifo_start_read, 617 .f_stop_read = &wsp_fifo_stop_read, 618 .basename[0] = WSP_DRIVER_NAME, 619 }; 620 621 #ifdef EVDEV_SUPPORT 622 static evdev_open_t wsp_ev_open; 623 static evdev_close_t wsp_ev_close; 624 static const struct evdev_methods wsp_evdev_methods = { 625 .ev_open = &wsp_ev_open, 626 .ev_close = &wsp_ev_close, 627 }; 628 #endif 629 630 /* device initialization and shutdown */ 631 static int wsp_enable(struct wsp_softc *sc); 632 static void wsp_disable(struct wsp_softc *sc); 633 634 /* updating fifo */ 635 static void wsp_reset_buf(struct wsp_softc *sc); 636 static void wsp_add_to_queue(struct wsp_softc *, int, int, int, uint32_t); 637 638 /* Device methods. */ 639 static device_probe_t wsp_probe; 640 static device_attach_t wsp_attach; 641 static device_detach_t wsp_detach; 642 static usb_callback_t wsp_intr_callback; 643 644 static const struct usb_config wsp_config[WSP_N_TRANSFER] = { 645 [WSP_INTR_DT] = { 646 .type = UE_INTERRUPT, 647 .endpoint = UE_ADDR_ANY, 648 .direction = UE_DIR_IN, 649 .flags = { 650 .pipe_bof = 0, 651 .short_xfer_ok = 1, 652 }, 653 .bufsize = WSP_BUFFER_MAX, 654 .callback = &wsp_intr_callback, 655 }, 656 }; 657 658 static usb_error_t 659 wsp_set_device_mode(struct wsp_softc *sc, uint8_t on) 660 { 661 const struct wsp_dev_params *params = sc->sc_params; 662 uint8_t mode_bytes[8]; 663 usb_error_t err; 664 665 /* Type 3 does not require a mode switch */ 666 if (params->tp == wsp_tp + TYPE3) 667 return 0; 668 669 err = usbd_req_get_report(sc->sc_usb_device, NULL, 670 mode_bytes, params->tp->um_size, params->tp->iface_index, 671 UHID_FEATURE_REPORT, params->tp->um_req_idx); 672 673 if (err != USB_ERR_NORMAL_COMPLETION) { 674 DPRINTF("Failed to read device mode (%d)\n", err); 675 return (err); 676 } 677 678 /* 679 * XXX Need to wait at least 250ms for hardware to get 680 * ready. The device mode handling appears to be handled 681 * asynchronously and we should not issue these commands too 682 * quickly. 683 */ 684 pause("WHW", hz / 4); 685 686 mode_bytes[params->tp->um_switch_idx] = 687 on ? params->tp->um_switch_on : params->tp->um_switch_off; 688 689 return (usbd_req_set_report(sc->sc_usb_device, NULL, 690 mode_bytes, params->tp->um_size, params->tp->iface_index, 691 UHID_FEATURE_REPORT, params->tp->um_req_idx)); 692 } 693 694 static int 695 wsp_enable(struct wsp_softc *sc) 696 { 697 /* reset status */ 698 memset(&sc->sc_status, 0, sizeof(sc->sc_status)); 699 sc->sc_state |= WSP_ENABLED; 700 701 DPRINTFN(WSP_LLEVEL_INFO, "enabled wsp\n"); 702 return (0); 703 } 704 705 static void 706 wsp_disable(struct wsp_softc *sc) 707 { 708 sc->sc_state &= ~WSP_ENABLED; 709 DPRINTFN(WSP_LLEVEL_INFO, "disabled wsp\n"); 710 } 711 712 static int 713 wsp_probe(device_t self) 714 { 715 struct usb_attach_arg *uaa = device_get_ivars(self); 716 struct usb_interface_descriptor *id; 717 struct usb_interface *iface; 718 uint8_t i; 719 720 if (uaa->usb_mode != USB_MODE_HOST) 721 return (ENXIO); 722 723 /* figure out first interface matching */ 724 for (i = 1;; i++) { 725 iface = usbd_get_iface(uaa->device, i); 726 if (iface == NULL || i == 3) 727 return (ENXIO); 728 id = iface->idesc; 729 if ((id == NULL) || 730 (id->bInterfaceClass != UICLASS_HID) || 731 (id->bInterfaceProtocol != 0 && 732 id->bInterfaceProtocol != UIPROTO_MOUSE)) 733 continue; 734 break; 735 } 736 /* check if we are attaching to the first match */ 737 if (uaa->info.bIfaceIndex != i) 738 return (ENXIO); 739 if (usbd_lookup_id_by_uaa(wsp_devs, sizeof(wsp_devs), uaa) != 0) 740 return (ENXIO); 741 742 return (BUS_PROBE_DEFAULT); 743 } 744 745 static int 746 wsp_attach(device_t dev) 747 { 748 struct wsp_softc *sc = device_get_softc(dev); 749 struct usb_attach_arg *uaa = device_get_ivars(dev); 750 usb_error_t err; 751 void *d_ptr = NULL; 752 uint16_t d_len; 753 754 DPRINTFN(WSP_LLEVEL_INFO, "sc=%p\n", sc); 755 756 /* Get HID descriptor */ 757 err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr, 758 &d_len, M_TEMP, uaa->info.bIfaceIndex); 759 760 if (err == USB_ERR_NORMAL_COMPLETION) { 761 /* Get HID report descriptor length */ 762 sc->tp_datalen = hid_report_size_max(d_ptr, d_len, hid_input, 763 NULL); 764 free(d_ptr, M_TEMP); 765 766 if (sc->tp_datalen <= 0 || sc->tp_datalen > WSP_BUFFER_MAX) { 767 DPRINTF("Invalid datalength or too big " 768 "datalength: %d\n", sc->tp_datalen); 769 return (ENXIO); 770 } 771 } else { 772 return (ENXIO); 773 } 774 775 sc->sc_usb_device = uaa->device; 776 777 /* get device specific configuration */ 778 sc->sc_params = wsp_dev_params + USB_GET_DRIVER_INFO(uaa); 779 780 /* 781 * By default the touchpad behaves like a HID device, sending 782 * packets with reportID = 8. Such reports contain only 783 * limited information. They encode movement deltas and button 784 * events, but do not include data from the pressure 785 * sensors. The device input mode can be switched from HID 786 * reports to raw sensor data using vendor-specific USB 787 * control commands: 788 */ 789 790 /* 791 * During re-enumeration of the device we need to force the 792 * device back into HID mode before switching it to RAW 793 * mode. Else the device does not work like expected. 794 */ 795 err = wsp_set_device_mode(sc, 0); 796 if (err != USB_ERR_NORMAL_COMPLETION) { 797 DPRINTF("Failed to set mode to HID MODE (%d)\n", err); 798 return (ENXIO); 799 } 800 801 err = wsp_set_device_mode(sc, 1); 802 if (err != USB_ERR_NORMAL_COMPLETION) { 803 DPRINTF("failed to set mode to RAW MODE (%d)\n", err); 804 return (ENXIO); 805 } 806 807 mtx_init(&sc->sc_mutex, "wspmtx", NULL, MTX_DEF | MTX_RECURSE); 808 809 err = usbd_transfer_setup(uaa->device, 810 &uaa->info.bIfaceIndex, sc->sc_xfer, wsp_config, 811 WSP_N_TRANSFER, sc, &sc->sc_mutex); 812 if (err) { 813 DPRINTF("error=%s\n", usbd_errstr(err)); 814 goto detach; 815 } 816 if (usb_fifo_attach(sc->sc_usb_device, sc, &sc->sc_mutex, 817 &wsp_fifo_methods, &sc->sc_fifo, 818 device_get_unit(dev), -1, uaa->info.bIfaceIndex, 819 UID_ROOT, GID_OPERATOR, 0644)) { 820 goto detach; 821 } 822 device_set_usb_desc(dev); 823 824 sc->sc_hw.buttons = 3; 825 sc->sc_hw.iftype = MOUSE_IF_USB; 826 sc->sc_hw.type = MOUSE_PAD; 827 sc->sc_hw.model = MOUSE_MODEL_GENERIC; 828 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 829 sc->sc_mode.rate = -1; 830 sc->sc_mode.resolution = MOUSE_RES_UNKNOWN; 831 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 832 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 833 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 834 835 sc->sc_touch = WSP_UNTOUCH; 836 sc->scr_mode = WSP_SCR_NONE; 837 838 #ifdef EVDEV_SUPPORT 839 sc->sc_evdev = evdev_alloc(); 840 evdev_set_name(sc->sc_evdev, device_get_desc(dev)); 841 evdev_set_phys(sc->sc_evdev, device_get_nameunit(dev)); 842 evdev_set_id(sc->sc_evdev, BUS_USB, uaa->info.idVendor, 843 uaa->info.idProduct, 0); 844 evdev_set_serial(sc->sc_evdev, usb_get_serial(uaa->device)); 845 evdev_set_methods(sc->sc_evdev, sc, &wsp_evdev_methods); 846 evdev_support_prop(sc->sc_evdev, INPUT_PROP_POINTER); 847 evdev_support_event(sc->sc_evdev, EV_SYN); 848 evdev_support_event(sc->sc_evdev, EV_ABS); 849 evdev_support_event(sc->sc_evdev, EV_KEY); 850 851 #define WSP_SUPPORT_ABS(evdev, code, param) \ 852 evdev_support_abs((evdev), (code), (param).min, (param).max, \ 853 ((param).max - (param).min) / (param).snratio, 0, \ 854 (param).size != 0 ? ((param).max - (param).min) / (param).size : 0); 855 856 /* finger position */ 857 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_POSITION_X, sc->sc_params->x); 858 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_POSITION_Y, sc->sc_params->y); 859 /* finger pressure */ 860 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_PRESSURE, sc->sc_params->p); 861 /* finger touch area */ 862 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_TOUCH_MAJOR, sc->sc_params->w); 863 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_TOUCH_MINOR, sc->sc_params->w); 864 /* finger approach area */ 865 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_WIDTH_MAJOR, sc->sc_params->w); 866 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_WIDTH_MINOR, sc->sc_params->w); 867 /* finger orientation */ 868 WSP_SUPPORT_ABS(sc->sc_evdev, ABS_MT_ORIENTATION, sc->sc_params->o); 869 /* button properties */ 870 evdev_support_key(sc->sc_evdev, BTN_LEFT); 871 if ((sc->sc_params->tp->caps & HAS_INTEGRATED_BUTTON) != 0) 872 evdev_support_prop(sc->sc_evdev, INPUT_PROP_BUTTONPAD); 873 /* Enable automatic touch assignment for type B MT protocol */ 874 evdev_support_abs(sc->sc_evdev, ABS_MT_SLOT, 875 0, MAX_FINGERS - 1, 0, 0, 0); 876 evdev_support_abs(sc->sc_evdev, ABS_MT_TRACKING_ID, 877 -1, MAX_FINGERS - 1, 0, 0, 0); 878 evdev_set_flag(sc->sc_evdev, EVDEV_FLAG_MT_TRACK); 879 evdev_set_flag(sc->sc_evdev, EVDEV_FLAG_MT_AUTOREL); 880 /* Synaptics compatibility events */ 881 evdev_set_flag(sc->sc_evdev, EVDEV_FLAG_MT_STCOMPAT); 882 883 err = evdev_register(sc->sc_evdev); 884 if (err) 885 goto detach; 886 #endif 887 888 return (0); 889 890 detach: 891 wsp_detach(dev); 892 return (ENOMEM); 893 } 894 895 static int 896 wsp_detach(device_t dev) 897 { 898 struct wsp_softc *sc = device_get_softc(dev); 899 900 (void) wsp_set_device_mode(sc, 0); 901 902 mtx_lock(&sc->sc_mutex); 903 if (sc->sc_state & WSP_ENABLED) 904 wsp_disable(sc); 905 mtx_unlock(&sc->sc_mutex); 906 907 usb_fifo_detach(&sc->sc_fifo); 908 909 #ifdef EVDEV_SUPPORT 910 evdev_free(sc->sc_evdev); 911 #endif 912 913 usbd_transfer_unsetup(sc->sc_xfer, WSP_N_TRANSFER); 914 915 mtx_destroy(&sc->sc_mutex); 916 917 return (0); 918 } 919 920 static void 921 wsp_intr_callback(struct usb_xfer *xfer, usb_error_t error) 922 { 923 struct wsp_softc *sc = usbd_xfer_softc(xfer); 924 const struct wsp_dev_params *params = sc->sc_params; 925 struct usb_page_cache *pc; 926 struct tp_finger *f; 927 struct wsp_tuning tun = wsp_tuning; 928 int ntouch = 0; /* the finger number in touch */ 929 int ibt = 0; /* button status */ 930 int dx = 0; 931 int dy = 0; 932 int dz = 0; 933 int rdx = 0; 934 int rdy = 0; 935 int rdz = 0; 936 int len; 937 int i; 938 #ifdef EVDEV_SUPPORT 939 int slot = 0; 940 #endif 941 942 wsp_runing_rangecheck(&tun); 943 944 if (sc->dz_count == 0) 945 sc->dz_count = WSP_DZ_MAX_COUNT; 946 947 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 948 949 switch (USB_GET_STATE(xfer)) { 950 case USB_ST_TRANSFERRED: 951 952 /* copy out received data */ 953 pc = usbd_xfer_get_frame(xfer, 0); 954 usbd_copy_out(pc, 0, sc->tp_data, len); 955 956 if ((len < params->tp->offset + params->tp->fsize) || 957 ((len - params->tp->offset) % params->tp->fsize) != 0) { 958 DPRINTFN(WSP_LLEVEL_INFO, "Invalid length: %d, %x, %x\n", 959 len, sc->tp_data[0], sc->tp_data[1]); 960 goto tr_setup; 961 } 962 963 if (len < sc->tp_datalen) { 964 /* make sure we don't process old data */ 965 memset(sc->tp_data + len, 0, sc->tp_datalen - len); 966 } 967 968 if (params->tp != wsp_tp + TYPE1) { 969 ibt = sc->tp_data[params->tp->button]; 970 ntouch = sc->tp_data[params->tp->button - 1]; 971 } else 972 ntouch = (len - params->tp->offset) / params->tp->fsize; 973 974 /* range check */ 975 if (ntouch < 0) 976 ntouch = 0; 977 else if (ntouch > MAX_FINGERS) 978 ntouch = MAX_FINGERS; 979 980 for (i = 0; i != ntouch; i++) { 981 f = (struct tp_finger *)(sc->tp_data + params->tp->offset + params->tp->delta + i * params->tp->fsize); 982 /* swap endianness, if any */ 983 if (le16toh(0x1234) != 0x1234) { 984 f->origin = le16toh((uint16_t)f->origin); 985 f->abs_x = le16toh((uint16_t)f->abs_x); 986 f->abs_y = le16toh((uint16_t)f->abs_y); 987 f->rel_x = le16toh((uint16_t)f->rel_x); 988 f->rel_y = le16toh((uint16_t)f->rel_y); 989 f->tool_major = le16toh((uint16_t)f->tool_major); 990 f->tool_minor = le16toh((uint16_t)f->tool_minor); 991 f->orientation = le16toh((uint16_t)f->orientation); 992 f->touch_major = le16toh((uint16_t)f->touch_major); 993 f->touch_minor = le16toh((uint16_t)f->touch_minor); 994 f->pressure = le16toh((uint16_t)f->pressure); 995 f->multi = le16toh((uint16_t)f->multi); 996 } 997 DPRINTFN(WSP_LLEVEL_INFO, 998 "[%d]ibt=%d, taps=%d, o=%4d, ax=%5d, ay=%5d, " 999 "rx=%5d, ry=%5d, tlmaj=%4d, tlmin=%4d, ot=%4x, " 1000 "tchmaj=%4d, tchmin=%4d, presure=%4d, m=%4x\n", 1001 i, ibt, ntouch, f->origin, f->abs_x, f->abs_y, 1002 f->rel_x, f->rel_y, f->tool_major, f->tool_minor, f->orientation, 1003 f->touch_major, f->touch_minor, f->pressure, f->multi); 1004 sc->pos_x[i] = f->abs_x; 1005 sc->pos_y[i] = -f->abs_y; 1006 sc->index[i] = f; 1007 #ifdef EVDEV_SUPPORT 1008 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE && f->touch_major != 0) { 1009 union evdev_mt_slot slot_data = { 1010 .id = slot, 1011 .x = f->abs_x, 1012 .y = params->y.min + params->y.max - f->abs_y, 1013 .p = f->pressure, 1014 .maj = f->touch_major << 1, 1015 .min = f->touch_minor << 1, 1016 .w_maj = f->tool_major << 1, 1017 .w_min = f->tool_minor << 1, 1018 .ori = params->o.max - f->orientation, 1019 }; 1020 evdev_mt_push_slot(sc->sc_evdev, slot, &slot_data); 1021 slot++; 1022 } 1023 #endif 1024 } 1025 1026 #ifdef EVDEV_SUPPORT 1027 if (evdev_rcpt_mask & EVDEV_RCPT_HW_MOUSE) { 1028 evdev_push_key(sc->sc_evdev, BTN_LEFT, ibt); 1029 evdev_sync(sc->sc_evdev); 1030 } 1031 #endif 1032 sc->sc_status.flags &= ~MOUSE_POSCHANGED; 1033 sc->sc_status.flags &= ~MOUSE_STDBUTTONSCHANGED; 1034 sc->sc_status.obutton = sc->sc_status.button; 1035 sc->sc_status.button = 0; 1036 1037 if (ibt != 0) { 1038 if ((params->tp->caps & HAS_INTEGRATED_BUTTON) && ntouch == 2) 1039 sc->sc_status.button |= MOUSE_BUTTON3DOWN; 1040 else if ((params->tp->caps & HAS_INTEGRATED_BUTTON) && ntouch == 3) 1041 sc->sc_status.button |= MOUSE_BUTTON2DOWN; 1042 else 1043 sc->sc_status.button |= MOUSE_BUTTON1DOWN; 1044 sc->ibtn = 1; 1045 } 1046 sc->intr_count++; 1047 1048 if (sc->ntaps < ntouch) { 1049 switch (ntouch) { 1050 case 1: 1051 if (sc->index[0]->touch_major > tun.pressure_tap_threshold && 1052 sc->index[0]->tool_major <= 1200) 1053 sc->ntaps = 1; 1054 break; 1055 case 2: 1056 if (sc->index[0]->touch_major > tun.pressure_tap_threshold-30 && 1057 sc->index[1]->touch_major > tun.pressure_tap_threshold-30) 1058 sc->ntaps = 2; 1059 break; 1060 case 3: 1061 if (sc->index[0]->touch_major > tun.pressure_tap_threshold-40 && 1062 sc->index[1]->touch_major > tun.pressure_tap_threshold-40 && 1063 sc->index[2]->touch_major > tun.pressure_tap_threshold-40) 1064 sc->ntaps = 3; 1065 break; 1066 default: 1067 break; 1068 } 1069 } 1070 if (ntouch == 2) { 1071 sc->distance = max(sc->distance, max( 1072 abs(sc->pos_x[0] - sc->pos_x[1]), 1073 abs(sc->pos_y[0] - sc->pos_y[1]))); 1074 } 1075 if (sc->index[0]->touch_major < tun.pressure_untouch_threshold && 1076 sc->sc_status.button == 0) { 1077 sc->sc_touch = WSP_UNTOUCH; 1078 if (sc->intr_count < WSP_TAP_MAX_COUNT && 1079 sc->intr_count > WSP_TAP_THRESHOLD && 1080 sc->ntaps && sc->ibtn == 0) { 1081 /* 1082 * Add a pair of events (button-down and 1083 * button-up). 1084 */ 1085 switch (sc->ntaps) { 1086 case 1: 1087 if (!(params->tp->caps & HAS_INTEGRATED_BUTTON) || tun.enable_single_tap_clicks) { 1088 wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON1DOWN); 1089 DPRINTFN(WSP_LLEVEL_INFO, "LEFT CLICK!\n"); 1090 } 1091 break; 1092 case 2: 1093 DPRINTFN(WSP_LLEVEL_INFO, "sum_x=%5d, sum_y=%5d\n", 1094 sc->dx_sum, sc->dy_sum); 1095 if (sc->distance < MAX_DISTANCE && abs(sc->dx_sum) < 5 && 1096 abs(sc->dy_sum) < 5) { 1097 wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON3DOWN); 1098 DPRINTFN(WSP_LLEVEL_INFO, "RIGHT CLICK!\n"); 1099 } 1100 break; 1101 case 3: 1102 wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON2DOWN); 1103 break; 1104 default: 1105 /* we don't handle taps of more than three fingers */ 1106 break; 1107 } 1108 wsp_add_to_queue(sc, 0, 0, 0, 0); /* button release */ 1109 } 1110 if ((sc->dt_sum / tun.scr_hor_threshold) != 0 && 1111 sc->ntaps == 2 && sc->scr_mode == WSP_SCR_HOR) { 1112 /* 1113 * translate T-axis into button presses 1114 * until further 1115 */ 1116 if (sc->dt_sum > 0) 1117 wsp_add_to_queue(sc, 0, 0, 0, 1UL << 3); 1118 else if (sc->dt_sum < 0) 1119 wsp_add_to_queue(sc, 0, 0, 0, 1UL << 4); 1120 } 1121 sc->dz_count = WSP_DZ_MAX_COUNT; 1122 sc->dz_sum = 0; 1123 sc->intr_count = 0; 1124 sc->ibtn = 0; 1125 sc->ntaps = 0; 1126 sc->finger = 0; 1127 sc->distance = 0; 1128 sc->dt_sum = 0; 1129 sc->dx_sum = 0; 1130 sc->dy_sum = 0; 1131 sc->rdx = 0; 1132 sc->rdy = 0; 1133 sc->rdz = 0; 1134 sc->scr_mode = WSP_SCR_NONE; 1135 } else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold && 1136 sc->sc_touch == WSP_UNTOUCH) { /* ignore first touch */ 1137 sc->sc_touch = WSP_FIRST_TOUCH; 1138 } else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold && 1139 sc->sc_touch == WSP_FIRST_TOUCH) { /* ignore second touch */ 1140 sc->sc_touch = WSP_SECOND_TOUCH; 1141 DPRINTFN(WSP_LLEVEL_INFO, "Fist pre_x=%5d, pre_y=%5d\n", 1142 sc->pre_pos_x, sc->pre_pos_y); 1143 } else { 1144 if (sc->sc_touch == WSP_SECOND_TOUCH) 1145 sc->sc_touch = WSP_TOUCHING; 1146 1147 if (ntouch != 0 && 1148 sc->index[0]->touch_major >= tun.pressure_touch_threshold) { 1149 dx = sc->pos_x[0] - sc->pre_pos_x; 1150 dy = sc->pos_y[0] - sc->pre_pos_y; 1151 1152 /* Ignore movement during button is releasing */ 1153 if (sc->ibtn != 0 && sc->sc_status.button == 0) 1154 dx = dy = 0; 1155 1156 /* Ignore movement if ntouch changed */ 1157 if (sc->o_ntouch != ntouch) 1158 dx = dy = 0; 1159 1160 /* Ignore unexpeted movement when typing */ 1161 if (ntouch == 1 && sc->index[0]->tool_major > 1200) 1162 dx = dy = 0; 1163 1164 if (sc->ibtn != 0 && ntouch == 1 && 1165 sc->intr_count < WSP_TAP_MAX_COUNT && 1166 abs(sc->dx_sum) < 1 && abs(sc->dy_sum) < 1 ) 1167 dx = dy = 0; 1168 1169 if (ntouch == 2 && sc->sc_status.button != 0) { 1170 dx = sc->pos_x[sc->finger] - sc->pre_pos_x; 1171 dy = sc->pos_y[sc->finger] - sc->pre_pos_y; 1172 1173 /* 1174 * Ignore movement of switch finger or 1175 * movement from ibt=0 to ibt=1 1176 */ 1177 if (sc->index[0]->origin == 0 || sc->index[1]->origin == 0 || 1178 sc->sc_status.obutton != sc->sc_status.button) { 1179 dx = dy = 0; 1180 sc->finger = 0; 1181 } 1182 if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) < 1183 (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) && 1184 sc->finger == 0) { 1185 sc->sc_touch = WSP_SECOND_TOUCH; 1186 dx = dy = 0; 1187 sc->finger = 1; 1188 } 1189 if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) >= 1190 (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) && 1191 sc->finger == 1) { 1192 sc->sc_touch = WSP_SECOND_TOUCH; 1193 dx = dy = 0; 1194 sc->finger = 0; 1195 } 1196 DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, mov=%5d\n", 1197 dx, dy, sc->finger); 1198 } 1199 if (sc->dz_count--) { 1200 rdz = (dy + sc->rdz) % tun.scale_factor; 1201 sc->dz_sum -= (dy + sc->rdz) / tun.scale_factor; 1202 sc->rdz = rdz; 1203 } 1204 if ((sc->dz_sum / tun.z_factor) != 0) 1205 sc->dz_count = 0; 1206 } 1207 rdx = (dx + sc->rdx) % tun.scale_factor; 1208 dx = (dx + sc->rdx) / tun.scale_factor; 1209 sc->rdx = rdx; 1210 1211 rdy = (dy + sc->rdy) % tun.scale_factor; 1212 dy = (dy + sc->rdy) / tun.scale_factor; 1213 sc->rdy = rdy; 1214 1215 sc->dx_sum += dx; 1216 sc->dy_sum += dy; 1217 1218 if (ntouch == 2 && sc->sc_status.button == 0) { 1219 if (sc->scr_mode == WSP_SCR_NONE && 1220 abs(sc->dx_sum) + abs(sc->dy_sum) > tun.scr_hor_threshold) 1221 sc->scr_mode = abs(sc->dx_sum) > 1222 abs(sc->dy_sum) * 2 ? WSP_SCR_HOR : WSP_SCR_VER; 1223 DPRINTFN(WSP_LLEVEL_INFO, "scr_mode=%5d, count=%d, dx_sum=%d, dy_sum=%d\n", 1224 sc->scr_mode, sc->intr_count, sc->dx_sum, sc->dy_sum); 1225 if (sc->scr_mode == WSP_SCR_HOR) 1226 sc->dt_sum += dx; 1227 else 1228 sc->dt_sum = 0; 1229 1230 dx = dy = 0; 1231 if (sc->dz_count == 0) 1232 dz = (sc->dz_sum / tun.z_factor) * (tun.z_invert ? -1 : 1); 1233 if (sc->scr_mode == WSP_SCR_HOR || 1234 abs(sc->pos_x[0] - sc->pos_x[1]) > MAX_DISTANCE || 1235 abs(sc->pos_y[0] - sc->pos_y[1]) > MAX_DISTANCE) 1236 dz = 0; 1237 } 1238 if (ntouch == 3) 1239 dx = dy = dz = 0; 1240 if (sc->intr_count < WSP_TAP_MAX_COUNT && 1241 abs(dx) < 3 && abs(dy) < 3 && abs(dz) < 3) 1242 dx = dy = dz = 0; 1243 else 1244 sc->intr_count = WSP_TAP_MAX_COUNT; 1245 if (dx || dy || dz) 1246 sc->sc_status.flags |= MOUSE_POSCHANGED; 1247 DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, dz=%5d, sc_touch=%x, btn=%x\n", 1248 dx, dy, dz, sc->sc_touch, sc->sc_status.button); 1249 sc->sc_status.dx += dx; 1250 sc->sc_status.dy += dy; 1251 sc->sc_status.dz += dz; 1252 1253 wsp_add_to_queue(sc, dx, -dy, dz, sc->sc_status.button); 1254 if (sc->dz_count == 0) { 1255 sc->dz_sum = 0; 1256 sc->rdz = 0; 1257 } 1258 } 1259 sc->pre_pos_x = sc->pos_x[0]; 1260 sc->pre_pos_y = sc->pos_y[0]; 1261 1262 if (ntouch == 2 && sc->sc_status.button != 0) { 1263 sc->pre_pos_x = sc->pos_x[sc->finger]; 1264 sc->pre_pos_y = sc->pos_y[sc->finger]; 1265 } 1266 sc->o_ntouch = ntouch; 1267 1268 case USB_ST_SETUP: 1269 tr_setup: 1270 /* check if we can put more data into the FIFO */ 1271 if (usb_fifo_put_bytes_max( 1272 sc->sc_fifo.fp[USB_FIFO_RX]) != 0) { 1273 usbd_xfer_set_frame_len(xfer, 0, 1274 sc->tp_datalen); 1275 usbd_transfer_submit(xfer); 1276 } 1277 break; 1278 1279 default: /* Error */ 1280 if (error != USB_ERR_CANCELLED) { 1281 /* try clear stall first */ 1282 usbd_xfer_set_stall(xfer); 1283 goto tr_setup; 1284 } 1285 break; 1286 } 1287 } 1288 1289 static void 1290 wsp_add_to_queue(struct wsp_softc *sc, int dx, int dy, int dz, 1291 uint32_t buttons_in) 1292 { 1293 uint32_t buttons_out; 1294 uint8_t buf[8]; 1295 1296 dx = imin(dx, 254); 1297 dx = imax(dx, -256); 1298 dy = imin(dy, 254); 1299 dy = imax(dy, -256); 1300 dz = imin(dz, 126); 1301 dz = imax(dz, -128); 1302 1303 buttons_out = MOUSE_MSC_BUTTONS; 1304 if (buttons_in & MOUSE_BUTTON1DOWN) 1305 buttons_out &= ~MOUSE_MSC_BUTTON1UP; 1306 else if (buttons_in & MOUSE_BUTTON2DOWN) 1307 buttons_out &= ~MOUSE_MSC_BUTTON2UP; 1308 else if (buttons_in & MOUSE_BUTTON3DOWN) 1309 buttons_out &= ~MOUSE_MSC_BUTTON3UP; 1310 1311 /* Encode the mouse data in standard format; refer to mouse(4) */ 1312 buf[0] = sc->sc_mode.syncmask[1]; 1313 buf[0] |= buttons_out; 1314 buf[1] = dx >> 1; 1315 buf[2] = dy >> 1; 1316 buf[3] = dx - (dx >> 1); 1317 buf[4] = dy - (dy >> 1); 1318 /* Encode extra bytes for level 1 */ 1319 if (sc->sc_mode.level == 1) { 1320 buf[5] = dz >> 1; /* dz / 2 */ 1321 buf[6] = dz - (dz >> 1);/* dz - (dz / 2) */ 1322 buf[7] = (((~buttons_in) >> 3) & MOUSE_SYS_EXTBUTTONS); 1323 } 1324 usb_fifo_put_data_linear(sc->sc_fifo.fp[USB_FIFO_RX], buf, 1325 sc->sc_mode.packetsize, 1); 1326 } 1327 1328 static void 1329 wsp_reset_buf(struct wsp_softc *sc) 1330 { 1331 /* reset read queue */ 1332 usb_fifo_reset(sc->sc_fifo.fp[USB_FIFO_RX]); 1333 } 1334 1335 static void 1336 wsp_start_read(struct wsp_softc *sc) 1337 { 1338 int rate; 1339 1340 /* Check if we should override the default polling interval */ 1341 rate = sc->sc_pollrate; 1342 /* Range check rate */ 1343 if (rate > 1000) 1344 rate = 1000; 1345 /* Check for set rate */ 1346 if ((rate > 0) && (sc->sc_xfer[WSP_INTR_DT] != NULL)) { 1347 /* Stop current transfer, if any */ 1348 usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]); 1349 /* Set new interval */ 1350 usbd_xfer_set_interval(sc->sc_xfer[WSP_INTR_DT], 1000 / rate); 1351 /* Only set pollrate once */ 1352 sc->sc_pollrate = 0; 1353 } 1354 usbd_transfer_start(sc->sc_xfer[WSP_INTR_DT]); 1355 } 1356 1357 static void 1358 wsp_stop_read(struct wsp_softc *sc) 1359 { 1360 usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]); 1361 } 1362 1363 static int 1364 wsp_open(struct usb_fifo *fifo, int fflags) 1365 { 1366 struct wsp_softc *sc = usb_fifo_softc(fifo); 1367 int rc = 0; 1368 1369 DPRINTFN(WSP_LLEVEL_INFO, "\n"); 1370 1371 if (sc->sc_fflags & fflags) 1372 return (EBUSY); 1373 1374 if (fflags & FREAD) { 1375 if (usb_fifo_alloc_buffer(fifo, 1376 WSP_FIFO_BUF_SIZE, WSP_FIFO_QUEUE_MAXLEN)) { 1377 return (ENOMEM); 1378 } 1379 #ifdef EVDEV_SUPPORT 1380 if ((sc->sc_state & WSP_EVDEV_OPENED) == 0) 1381 #endif 1382 rc = wsp_enable(sc); 1383 if (rc != 0) { 1384 usb_fifo_free_buffer(fifo); 1385 return (rc); 1386 } 1387 } 1388 sc->sc_fflags |= fflags & (FREAD | FWRITE); 1389 return (0); 1390 } 1391 1392 static void 1393 wsp_close(struct usb_fifo *fifo, int fflags) 1394 { 1395 struct wsp_softc *sc = usb_fifo_softc(fifo); 1396 1397 if (fflags & FREAD) { 1398 #ifdef EVDEV_SUPPORT 1399 if ((sc->sc_state & WSP_EVDEV_OPENED) == 0) 1400 #endif 1401 wsp_disable(sc); 1402 usb_fifo_free_buffer(fifo); 1403 } 1404 1405 sc->sc_fflags &= ~(fflags & (FREAD | FWRITE)); 1406 } 1407 1408 static void 1409 wsp_fifo_start_read(struct usb_fifo *fifo) 1410 { 1411 struct wsp_softc *sc = usb_fifo_softc(fifo); 1412 1413 wsp_start_read(sc); 1414 } 1415 1416 static void 1417 wsp_fifo_stop_read(struct usb_fifo *fifo) 1418 { 1419 struct wsp_softc *sc = usb_fifo_softc(fifo); 1420 1421 #ifdef EVDEV_SUPPORT 1422 if ((sc->sc_state & WSP_EVDEV_OPENED) == 0) 1423 #endif 1424 wsp_stop_read(sc); 1425 } 1426 1427 #ifdef EVDEV_SUPPORT 1428 static int 1429 wsp_ev_open(struct evdev_dev *evdev) 1430 { 1431 struct wsp_softc *sc = evdev_get_softc(evdev); 1432 int rc = 0; 1433 1434 mtx_lock(&sc->sc_mutex); 1435 if (sc->sc_fflags == 0) 1436 rc = wsp_enable(sc); 1437 if (rc == 0) { 1438 wsp_start_read(sc); 1439 sc->sc_state |= WSP_EVDEV_OPENED; 1440 } 1441 mtx_unlock(&sc->sc_mutex); 1442 1443 return (rc); 1444 } 1445 1446 static int 1447 wsp_ev_close(struct evdev_dev *evdev) 1448 { 1449 struct wsp_softc *sc = evdev_get_softc(evdev); 1450 1451 mtx_lock(&sc->sc_mutex); 1452 sc->sc_state &= ~WSP_EVDEV_OPENED; 1453 if (sc->sc_fflags == 0) 1454 wsp_stop_read(sc); 1455 mtx_unlock(&sc->sc_mutex); 1456 1457 return (0); 1458 } 1459 #endif 1460 1461 int 1462 wsp_ioctl(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags) 1463 { 1464 struct wsp_softc *sc = usb_fifo_softc(fifo); 1465 mousemode_t mode; 1466 int error = 0; 1467 1468 mtx_lock(&sc->sc_mutex); 1469 1470 switch (cmd) { 1471 case MOUSE_GETHWINFO: 1472 *(mousehw_t *)addr = sc->sc_hw; 1473 break; 1474 case MOUSE_GETMODE: 1475 *(mousemode_t *)addr = sc->sc_mode; 1476 break; 1477 case MOUSE_SETMODE: 1478 mode = *(mousemode_t *)addr; 1479 1480 if (mode.level == -1) 1481 /* Don't change the current setting */ 1482 ; 1483 else if ((mode.level < 0) || (mode.level > 1)) { 1484 error = EINVAL; 1485 goto done; 1486 } 1487 sc->sc_mode.level = mode.level; 1488 sc->sc_pollrate = mode.rate; 1489 sc->sc_hw.buttons = 3; 1490 1491 if (sc->sc_mode.level == 0) { 1492 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 1493 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 1494 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 1495 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 1496 } else if (sc->sc_mode.level == 1) { 1497 sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; 1498 sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; 1499 sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; 1500 sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; 1501 } 1502 wsp_reset_buf(sc); 1503 break; 1504 case MOUSE_GETLEVEL: 1505 *(int *)addr = sc->sc_mode.level; 1506 break; 1507 case MOUSE_SETLEVEL: 1508 if (*(int *)addr < 0 || *(int *)addr > 1) { 1509 error = EINVAL; 1510 goto done; 1511 } 1512 sc->sc_mode.level = *(int *)addr; 1513 sc->sc_hw.buttons = 3; 1514 1515 if (sc->sc_mode.level == 0) { 1516 sc->sc_mode.protocol = MOUSE_PROTO_MSC; 1517 sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE; 1518 sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK; 1519 sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC; 1520 } else if (sc->sc_mode.level == 1) { 1521 sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE; 1522 sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE; 1523 sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK; 1524 sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC; 1525 } 1526 wsp_reset_buf(sc); 1527 break; 1528 case MOUSE_GETSTATUS:{ 1529 mousestatus_t *status = (mousestatus_t *)addr; 1530 1531 *status = sc->sc_status; 1532 sc->sc_status.obutton = sc->sc_status.button; 1533 sc->sc_status.button = 0; 1534 sc->sc_status.dx = 0; 1535 sc->sc_status.dy = 0; 1536 sc->sc_status.dz = 0; 1537 1538 if (status->dx || status->dy || status->dz) 1539 status->flags |= MOUSE_POSCHANGED; 1540 if (status->button != status->obutton) 1541 status->flags |= MOUSE_BUTTONSCHANGED; 1542 break; 1543 } 1544 default: 1545 error = ENOTTY; 1546 } 1547 1548 done: 1549 mtx_unlock(&sc->sc_mutex); 1550 return (error); 1551 } 1552 1553 static device_method_t wsp_methods[] = { 1554 /* Device interface */ 1555 DEVMETHOD(device_probe, wsp_probe), 1556 DEVMETHOD(device_attach, wsp_attach), 1557 DEVMETHOD(device_detach, wsp_detach), 1558 DEVMETHOD_END 1559 }; 1560 1561 static driver_t wsp_driver = { 1562 .name = WSP_DRIVER_NAME, 1563 .methods = wsp_methods, 1564 .size = sizeof(struct wsp_softc) 1565 }; 1566 1567 DRIVER_MODULE(wsp, uhub, wsp_driver, NULL, NULL); 1568 MODULE_DEPEND(wsp, usb, 1, 1, 1); 1569 MODULE_DEPEND(wsp, hid, 1, 1, 1); 1570 #ifdef EVDEV_SUPPORT 1571 MODULE_DEPEND(wsp, evdev, 1, 1, 1); 1572 #endif 1573 MODULE_VERSION(wsp, 1); 1574 USB_PNP_HOST_INFO(wsp_devs); 1575