xref: /freebsd/sys/dev/usb/input/wsp.c (revision 0b3105a37d7adcadcb720112fed4dc4e8040be99)
1 /*-
2  * Copyright (c) 2012 Huang Wen Hui
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/cdefs.h>
28 __FBSDID("$FreeBSD$");
29 
30 #include <sys/param.h>
31 #include <sys/systm.h>
32 #include <sys/kernel.h>
33 #include <sys/malloc.h>
34 #include <sys/module.h>
35 #include <sys/lock.h>
36 #include <sys/mutex.h>
37 #include <sys/bus.h>
38 #include <sys/conf.h>
39 #include <sys/fcntl.h>
40 #include <sys/file.h>
41 #include <sys/selinfo.h>
42 #include <sys/poll.h>
43 #include <sys/sysctl.h>
44 
45 #include <dev/usb/usb.h>
46 #include <dev/usb/usbdi.h>
47 #include <dev/usb/usbdi_util.h>
48 #include <dev/usb/usbhid.h>
49 
50 #include "usbdevs.h"
51 
52 #define	USB_DEBUG_VAR wsp_debug
53 #include <dev/usb/usb_debug.h>
54 
55 #include <sys/mouse.h>
56 
57 #define	WSP_DRIVER_NAME "wsp"
58 #define	WSP_BUFFER_MAX	1024
59 
60 #define	WSP_CLAMP(x,low,high) do {		\
61 	if ((x) < (low))			\
62 		(x) = (low);			\
63 	else if ((x) > (high))			\
64 		(x) = (high);			\
65 } while (0)
66 
67 /* Tunables */
68 static	SYSCTL_NODE(_hw_usb, OID_AUTO, wsp, CTLFLAG_RW, 0, "USB wsp");
69 
70 #ifdef USB_DEBUG
71 enum wsp_log_level {
72 	WSP_LLEVEL_DISABLED = 0,
73 	WSP_LLEVEL_ERROR,
74 	WSP_LLEVEL_DEBUG,		/* for troubleshooting */
75 	WSP_LLEVEL_INFO,		/* for diagnostics */
76 };
77 static int wsp_debug = WSP_LLEVEL_ERROR;/* the default is to only log errors */
78 
79 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, debug, CTLFLAG_RWTUN,
80     &wsp_debug, WSP_LLEVEL_ERROR, "WSP debug level");
81 #endif					/* USB_DEBUG */
82 
83 static struct wsp_tuning {
84 	int	scale_factor;
85 	int	z_factor;
86 	int	pressure_touch_threshold;
87 	int	pressure_untouch_threshold;
88 	int	pressure_tap_threshold;
89 	int	scr_hor_threshold;
90 }
91 	wsp_tuning =
92 {
93 	.scale_factor = 12,
94 	.z_factor = 5,
95 	.pressure_touch_threshold = 50,
96 	.pressure_untouch_threshold = 10,
97 	.pressure_tap_threshold = 120,
98 	.scr_hor_threshold = 20,
99 };
100 
101 static void
102 wsp_runing_rangecheck(struct wsp_tuning *ptun)
103 {
104 	WSP_CLAMP(ptun->scale_factor, 1, 63);
105 	WSP_CLAMP(ptun->z_factor, 1, 63);
106 	WSP_CLAMP(ptun->pressure_touch_threshold, 1, 255);
107 	WSP_CLAMP(ptun->pressure_untouch_threshold, 1, 255);
108 	WSP_CLAMP(ptun->pressure_tap_threshold, 1, 255);
109 	WSP_CLAMP(ptun->scr_hor_threshold, 1, 255);
110 }
111 
112 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scale_factor, CTLFLAG_RWTUN,
113     &wsp_tuning.scale_factor, 0, "movement scale factor");
114 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, z_factor, CTLFLAG_RWTUN,
115     &wsp_tuning.z_factor, 0, "Z-axis scale factor");
116 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_touch_threshold, CTLFLAG_RWTUN,
117     &wsp_tuning.pressure_touch_threshold, 0, "touch pressure threshold");
118 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_untouch_threshold, CTLFLAG_RWTUN,
119     &wsp_tuning.pressure_untouch_threshold, 0, "untouch pressure threshold");
120 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, pressure_tap_threshold, CTLFLAG_RWTUN,
121     &wsp_tuning.pressure_tap_threshold, 0, "tap pressure threshold");
122 SYSCTL_INT(_hw_usb_wsp, OID_AUTO, scr_hor_threshold, CTLFLAG_RWTUN,
123     &wsp_tuning.scr_hor_threshold, 0, "horizontal scrolling threshold");
124 
125 /*
126  * Some tables, structures, definitions and constant values for the
127  * touchpad protocol has been copied from Linux's
128  * "drivers/input/mouse/bcm5974.c" which has the following copyright
129  * holders under GPLv2. All device specific code in this driver has
130  * been written from scratch. The decoding algorithm is based on
131  * output from FreeBSD's usbdump.
132  *
133  * Copyright (C) 2008      Henrik Rydberg (rydberg@euromail.se)
134  * Copyright (C) 2008      Scott Shawcroft (scott.shawcroft@gmail.com)
135  * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
136  * Copyright (C) 2005      Johannes Berg (johannes@sipsolutions.net)
137  * Copyright (C) 2005      Stelian Pop (stelian@popies.net)
138  * Copyright (C) 2005      Frank Arnold (frank@scirocco-5v-turbo.de)
139  * Copyright (C) 2005      Peter Osterlund (petero2@telia.com)
140  * Copyright (C) 2005      Michael Hanselmann (linux-kernel@hansmi.ch)
141  * Copyright (C) 2006      Nicolas Boichat (nicolas@boichat.ch)
142  */
143 
144 /* button data structure */
145 struct bt_data {
146 	uint8_t	unknown1;		/* constant */
147 	uint8_t	button;			/* left button */
148 	uint8_t	rel_x;			/* relative x coordinate */
149 	uint8_t	rel_y;			/* relative y coordinate */
150 } __packed;
151 
152 /* trackpad header types */
153 enum tp_type {
154 	TYPE1,			/* plain trackpad */
155 	TYPE2,			/* button integrated in trackpad */
156 	TYPE3,			/* additional header fields since June 2013 */
157 	TYPE4                   /* additional header field for pressure data */
158 };
159 
160 /* trackpad finger data offsets, le16-aligned */
161 #define	FINGER_TYPE1		(13 * 2)
162 #define	FINGER_TYPE2		(15 * 2)
163 #define	FINGER_TYPE3		(19 * 2)
164 #define	FINGER_TYPE4		(23 * 2)
165 
166 /* trackpad button data offsets */
167 #define	BUTTON_TYPE2		15
168 #define	BUTTON_TYPE3		23
169 #define	BUTTON_TYPE4		31
170 
171 /* list of device capability bits */
172 #define	HAS_INTEGRATED_BUTTON	1
173 
174 /* trackpad finger data block size */
175 #define FSIZE_TYPE1             (14 * 2)
176 #define FSIZE_TYPE2             (14 * 2)
177 #define FSIZE_TYPE3             (14 * 2)
178 #define FSIZE_TYPE4             (15 * 2)
179 
180 /* trackpad finger header - little endian */
181 struct tp_header {
182 	uint8_t	flag;
183 	uint8_t	sn0;
184 	uint16_t wFixed0;
185 	uint32_t dwSn1;
186 	uint32_t dwFixed1;
187 	uint16_t wLength;
188 	uint8_t	nfinger;
189 	uint8_t	ibt;
190 	int16_t	wUnknown[6];
191 	uint8_t	q1;
192 	uint8_t	q2;
193 } __packed;
194 
195 /* trackpad finger structure - little endian */
196 struct tp_finger {
197 	int16_t	origin;			/* zero when switching track finger */
198 	int16_t	abs_x;			/* absolute x coodinate */
199 	int16_t	abs_y;			/* absolute y coodinate */
200 	int16_t	rel_x;			/* relative x coodinate */
201 	int16_t	rel_y;			/* relative y coodinate */
202 	int16_t	tool_major;		/* tool area, major axis */
203 	int16_t	tool_minor;		/* tool area, minor axis */
204 	int16_t	orientation;		/* 16384 when point, else 15 bit angle */
205 	int16_t	touch_major;		/* touch area, major axis */
206 	int16_t	touch_minor;		/* touch area, minor axis */
207 	int16_t	unused[2];		/* zeros */
208 	int16_t pressure;		/* pressure on forcetouch touchpad */
209 	int16_t	multi;			/* one finger: varies, more fingers:
210 				 	 * constant */
211 } __packed;
212 
213 /* trackpad finger data size, empirically at least ten fingers */
214 #define	MAX_FINGERS		16
215 #define	SIZEOF_FINGER		sizeof(struct tp_finger)
216 #define	SIZEOF_ALL_FINGERS	(MAX_FINGERS * SIZEOF_FINGER)
217 
218 #if (WSP_BUFFER_MAX < ((MAX_FINGERS * FSIZE_TYPE4) + FINGER_TYPE4))
219 #error "WSP_BUFFER_MAX is too small"
220 #endif
221 
222 enum {
223 	WSP_FLAG_WELLSPRING1,
224 	WSP_FLAG_WELLSPRING2,
225 	WSP_FLAG_WELLSPRING3,
226 	WSP_FLAG_WELLSPRING4,
227 	WSP_FLAG_WELLSPRING4A,
228 	WSP_FLAG_WELLSPRING5,
229 	WSP_FLAG_WELLSPRING6A,
230 	WSP_FLAG_WELLSPRING6,
231 	WSP_FLAG_WELLSPRING5A,
232 	WSP_FLAG_WELLSPRING7,
233 	WSP_FLAG_WELLSPRING7A,
234 	WSP_FLAG_WELLSPRING8,
235 	WSP_FLAG_WELLSPRING9,
236 	WSP_FLAG_MAX,
237 };
238 
239 /* device-specific configuration */
240 struct wsp_dev_params {
241 	uint8_t	caps;			/* device capability bitmask */
242 	uint8_t	tp_type;		/* type of trackpad interface */
243 	uint8_t	tp_button;		/* offset to button data */
244 	uint8_t	tp_offset;		/* offset to trackpad finger data */
245 	uint8_t tp_fsize;		/* bytes in single finger block */
246 	uint8_t tp_delta;		/* offset from header to finger struct */
247 	uint8_t iface_index;
248 	uint8_t um_size;		/* usb control message length */
249 	uint8_t um_req_val;		/* usb control message value */
250 	uint8_t um_req_idx;		/* usb control message index */
251 	uint8_t um_switch_idx;		/* usb control message mode switch index */
252 	uint8_t um_switch_on;		/* usb control message mode switch on */
253 	uint8_t um_switch_off;		/* usb control message mode switch off */
254 };
255 
256 static const struct wsp_dev_params wsp_dev_params[WSP_FLAG_MAX] = {
257 	[WSP_FLAG_WELLSPRING1] = {
258 		.caps = 0,
259 		.tp_type = TYPE1,
260 		.tp_button = 0,
261 		.tp_offset = FINGER_TYPE1,
262 		.tp_fsize = FSIZE_TYPE1,
263 		.tp_delta = 0,
264 		.iface_index = 0,
265 		.um_size = 8,
266 		.um_req_val = 0x03,
267 		.um_req_idx = 0x00,
268 		.um_switch_idx = 0,
269 		.um_switch_on = 0x01,
270 		.um_switch_off = 0x08,
271 	},
272 	[WSP_FLAG_WELLSPRING2] = {
273 		.caps = 0,
274 		.tp_type = TYPE1,
275 		.tp_button = 0,
276 		.tp_offset = FINGER_TYPE1,
277 		.tp_fsize = FSIZE_TYPE1,
278 		.tp_delta = 0,
279 		.iface_index = 0,
280 		.um_size = 8,
281 		.um_req_val = 0x03,
282 		.um_req_idx = 0x00,
283 		.um_switch_idx = 0,
284 		.um_switch_on = 0x01,
285 		.um_switch_off = 0x08,
286 	},
287 	[WSP_FLAG_WELLSPRING3] = {
288 		.caps = HAS_INTEGRATED_BUTTON,
289 		.tp_type = TYPE2,
290 		.tp_button = BUTTON_TYPE2,
291 		.tp_offset = FINGER_TYPE2,
292 		.tp_fsize = FSIZE_TYPE2,
293 		.tp_delta = 0,
294 		.iface_index = 0,
295 		.um_size = 8,
296 		.um_req_val = 0x03,
297 		.um_req_idx = 0x00,
298 		.um_switch_idx = 0,
299 		.um_switch_on = 0x01,
300 		.um_switch_off = 0x08,
301 	},
302 	[WSP_FLAG_WELLSPRING4] = {
303 		.caps = HAS_INTEGRATED_BUTTON,
304 		.tp_type = TYPE2,
305 		.tp_button = BUTTON_TYPE2,
306 		.tp_offset = FINGER_TYPE2,
307 		.tp_fsize = FSIZE_TYPE2,
308 		.tp_delta = 0,
309 		.iface_index = 0,
310 		.um_size = 8,
311 		.um_req_val = 0x03,
312 		.um_req_idx = 0x00,
313 		.um_switch_idx = 0,
314 		.um_switch_on = 0x01,
315 		.um_switch_off = 0x08,
316 	},
317 	[WSP_FLAG_WELLSPRING4A] = {
318 		.caps = HAS_INTEGRATED_BUTTON,
319 		.tp_type = TYPE2,
320 		.tp_button = BUTTON_TYPE2,
321 		.tp_offset = FINGER_TYPE2,
322 		.tp_fsize = FSIZE_TYPE2,
323 		.tp_delta = 0,
324 		.iface_index = 0,
325 		.um_size = 8,
326 		.um_req_val = 0x03,
327 		.um_req_idx = 0x00,
328 		.um_switch_idx = 0,
329 		.um_switch_on = 0x01,
330 		.um_switch_off = 0x08,
331 	},
332 	[WSP_FLAG_WELLSPRING5] = {
333 		.caps = HAS_INTEGRATED_BUTTON,
334 		.tp_type = TYPE2,
335 		.tp_button = BUTTON_TYPE2,
336 		.tp_offset = FINGER_TYPE2,
337 		.tp_fsize = FSIZE_TYPE2,
338 		.tp_delta = 0,
339 		.iface_index = 0,
340 		.um_size = 8,
341 		.um_req_val = 0x03,
342 		.um_req_idx = 0x00,
343 		.um_switch_idx = 0,
344 		.um_switch_on = 0x01,
345 		.um_switch_off = 0x08,
346 	},
347 	[WSP_FLAG_WELLSPRING6] = {
348 		.caps = HAS_INTEGRATED_BUTTON,
349 		.tp_type = TYPE2,
350 		.tp_button = BUTTON_TYPE2,
351 		.tp_offset = FINGER_TYPE2,
352 		.tp_fsize = FSIZE_TYPE2,
353 		.tp_delta = 0,
354 		.iface_index = 0,
355 		.um_size = 8,
356 		.um_req_val = 0x03,
357 		.um_req_idx = 0x00,
358 		.um_switch_idx = 0,
359 		.um_switch_on = 0x01,
360 		.um_switch_off = 0x08,
361 	},
362 	[WSP_FLAG_WELLSPRING5A] = {
363 		.caps = HAS_INTEGRATED_BUTTON,
364 		.tp_type = TYPE2,
365 		.tp_button = BUTTON_TYPE2,
366 		.tp_offset = FINGER_TYPE2,
367 		.tp_fsize = FSIZE_TYPE2,
368 		.tp_delta = 0,
369 		.iface_index = 0,
370 		.um_size = 8,
371 		.um_req_val = 0x03,
372 		.um_req_idx = 0x00,
373 		.um_switch_idx = 0,
374 		.um_switch_on = 0x01,
375 		.um_switch_off = 0x08,
376 	},
377 	[WSP_FLAG_WELLSPRING6A] = {
378 		.caps = HAS_INTEGRATED_BUTTON,
379 		.tp_type = TYPE2,
380 		.tp_button = BUTTON_TYPE2,
381 		.tp_offset = FINGER_TYPE2,
382 		.tp_fsize = FSIZE_TYPE2,
383 		.tp_delta = 0,
384 		.um_size = 8,
385 		.um_req_val = 0x03,
386 		.um_req_idx = 0x00,
387 		.um_switch_idx = 0,
388 		.um_switch_on = 0x01,
389 		.um_switch_off = 0x08,
390 	},
391 	[WSP_FLAG_WELLSPRING7] = {
392 		.caps = HAS_INTEGRATED_BUTTON,
393 		.tp_type = TYPE2,
394 		.tp_button = BUTTON_TYPE2,
395 		.tp_offset = FINGER_TYPE2,
396 		.tp_fsize = FSIZE_TYPE2,
397 		.tp_delta = 0,
398 		.iface_index = 0,
399 		.um_size = 8,
400 		.um_req_val = 0x03,
401 		.um_req_idx = 0x00,
402 		.um_switch_idx = 0,
403 		.um_switch_on = 0x01,
404 		.um_switch_off = 0x08,
405 	},
406 	[WSP_FLAG_WELLSPRING7A] = {
407 		.caps = HAS_INTEGRATED_BUTTON,
408 		.tp_type = TYPE2,
409 		.tp_button = BUTTON_TYPE2,
410 		.tp_offset = FINGER_TYPE2,
411 		.tp_fsize = FSIZE_TYPE2,
412 		.tp_delta = 0,
413 		.iface_index = 0,
414 		.um_size = 8,
415 		.um_req_val = 0x03,
416 		.um_req_idx = 0x00,
417 		.um_switch_idx = 0,
418 		.um_switch_on = 0x01,
419 		.um_switch_off = 0x08,
420 	},
421 	[WSP_FLAG_WELLSPRING8] = {
422 		.caps = HAS_INTEGRATED_BUTTON,
423 		.tp_type = TYPE3,
424 		.tp_button = BUTTON_TYPE3,
425 		.tp_offset = FINGER_TYPE3,
426 		.tp_fsize = FSIZE_TYPE3,
427 		.tp_delta = 0,
428 		.iface_index = 0,
429 		.um_size = 8,
430 		.um_req_val = 0x03,
431 		.um_req_idx = 0x00,
432 		.um_switch_idx = 0,
433 		.um_switch_on = 0x01,
434 		.um_switch_off = 0x08,
435 	},
436 	[WSP_FLAG_WELLSPRING9] = {
437 		.caps = HAS_INTEGRATED_BUTTON,
438 		.tp_type = TYPE4,
439 		.tp_button = BUTTON_TYPE4,
440 		.tp_offset = FINGER_TYPE4,
441 		.tp_fsize = FSIZE_TYPE4,
442 		.tp_delta = 2,
443 		.iface_index = 2,
444 		.um_size = 2,
445 		.um_req_val = 0x03,
446 		.um_req_idx = 0x02,
447 		.um_switch_idx = 1,
448 		.um_switch_on = 0x01,
449 		.um_switch_off = 0x00,
450 	},
451 };
452 
453 #define	WSP_DEV(v,p,i) { USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) }
454 
455 static const STRUCT_USB_HOST_ID wsp_devs[] = {
456 	/* MacbookAir1.1 */
457 	WSP_DEV(APPLE, WELLSPRING_ANSI, WSP_FLAG_WELLSPRING1),
458 	WSP_DEV(APPLE, WELLSPRING_ISO, WSP_FLAG_WELLSPRING1),
459 	WSP_DEV(APPLE, WELLSPRING_JIS, WSP_FLAG_WELLSPRING1),
460 
461 	/* MacbookProPenryn, aka wellspring2 */
462 	WSP_DEV(APPLE, WELLSPRING2_ANSI, WSP_FLAG_WELLSPRING2),
463 	WSP_DEV(APPLE, WELLSPRING2_ISO, WSP_FLAG_WELLSPRING2),
464 	WSP_DEV(APPLE, WELLSPRING2_JIS, WSP_FLAG_WELLSPRING2),
465 
466 	/* Macbook5,1 (unibody), aka wellspring3 */
467 	WSP_DEV(APPLE, WELLSPRING3_ANSI, WSP_FLAG_WELLSPRING3),
468 	WSP_DEV(APPLE, WELLSPRING3_ISO, WSP_FLAG_WELLSPRING3),
469 	WSP_DEV(APPLE, WELLSPRING3_JIS, WSP_FLAG_WELLSPRING3),
470 
471 	/* MacbookAir3,2 (unibody), aka wellspring4 */
472 	WSP_DEV(APPLE, WELLSPRING4_ANSI, WSP_FLAG_WELLSPRING4),
473 	WSP_DEV(APPLE, WELLSPRING4_ISO, WSP_FLAG_WELLSPRING4),
474 	WSP_DEV(APPLE, WELLSPRING4_JIS, WSP_FLAG_WELLSPRING4),
475 
476 	/* MacbookAir3,1 (unibody), aka wellspring4 */
477 	WSP_DEV(APPLE, WELLSPRING4A_ANSI, WSP_FLAG_WELLSPRING4A),
478 	WSP_DEV(APPLE, WELLSPRING4A_ISO, WSP_FLAG_WELLSPRING4A),
479 	WSP_DEV(APPLE, WELLSPRING4A_JIS, WSP_FLAG_WELLSPRING4A),
480 
481 	/* Macbook8 (unibody, March 2011) */
482 	WSP_DEV(APPLE, WELLSPRING5_ANSI, WSP_FLAG_WELLSPRING5),
483 	WSP_DEV(APPLE, WELLSPRING5_ISO, WSP_FLAG_WELLSPRING5),
484 	WSP_DEV(APPLE, WELLSPRING5_JIS, WSP_FLAG_WELLSPRING5),
485 
486 	/* MacbookAir4,1 (unibody, July 2011) */
487 	WSP_DEV(APPLE, WELLSPRING6A_ANSI, WSP_FLAG_WELLSPRING6A),
488 	WSP_DEV(APPLE, WELLSPRING6A_ISO, WSP_FLAG_WELLSPRING6A),
489 	WSP_DEV(APPLE, WELLSPRING6A_JIS, WSP_FLAG_WELLSPRING6A),
490 
491 	/* MacbookAir4,2 (unibody, July 2011) */
492 	WSP_DEV(APPLE, WELLSPRING6_ANSI, WSP_FLAG_WELLSPRING6),
493 	WSP_DEV(APPLE, WELLSPRING6_ISO, WSP_FLAG_WELLSPRING6),
494 	WSP_DEV(APPLE, WELLSPRING6_JIS, WSP_FLAG_WELLSPRING6),
495 
496 	/* Macbook8,2 (unibody) */
497 	WSP_DEV(APPLE, WELLSPRING5A_ANSI, WSP_FLAG_WELLSPRING5A),
498 	WSP_DEV(APPLE, WELLSPRING5A_ISO, WSP_FLAG_WELLSPRING5A),
499 	WSP_DEV(APPLE, WELLSPRING5A_JIS, WSP_FLAG_WELLSPRING5A),
500 
501 	/* MacbookPro10,1 (unibody, June 2012) */
502 	/* MacbookPro11,1-3 (unibody, June 2013) */
503 	WSP_DEV(APPLE, WELLSPRING7_ANSI, WSP_FLAG_WELLSPRING7),
504 	WSP_DEV(APPLE, WELLSPRING7_ISO, WSP_FLAG_WELLSPRING7),
505 	WSP_DEV(APPLE, WELLSPRING7_JIS, WSP_FLAG_WELLSPRING7),
506 
507 	/* MacbookPro10,2 (unibody, October 2012) */
508 	WSP_DEV(APPLE, WELLSPRING7A_ANSI, WSP_FLAG_WELLSPRING7A),
509 	WSP_DEV(APPLE, WELLSPRING7A_ISO, WSP_FLAG_WELLSPRING7A),
510 	WSP_DEV(APPLE, WELLSPRING7A_JIS, WSP_FLAG_WELLSPRING7A),
511 
512 	/* MacbookAir6,2 (unibody, June 2013) */
513 	WSP_DEV(APPLE, WELLSPRING8_ANSI, WSP_FLAG_WELLSPRING8),
514 	WSP_DEV(APPLE, WELLSPRING8_ISO, WSP_FLAG_WELLSPRING8),
515 	WSP_DEV(APPLE, WELLSPRING8_JIS, WSP_FLAG_WELLSPRING8),
516 
517 	/* MacbookPro12,1 MacbookPro11,4 */
518 	WSP_DEV(APPLE, WELLSPRING9_ANSI, WSP_FLAG_WELLSPRING9),
519 	WSP_DEV(APPLE, WELLSPRING9_ISO, WSP_FLAG_WELLSPRING9),
520 	WSP_DEV(APPLE, WELLSPRING9_JIS, WSP_FLAG_WELLSPRING9),
521 };
522 
523 #define	WSP_FIFO_BUF_SIZE	 8	/* bytes */
524 #define	WSP_FIFO_QUEUE_MAXLEN	50	/* units */
525 
526 enum {
527 	WSP_INTR_DT,
528 	WSP_N_TRANSFER,
529 };
530 
531 struct wsp_softc {
532 	struct usb_device *sc_usb_device;
533 	struct mtx sc_mutex;		/* for synchronization */
534 	struct usb_xfer *sc_xfer[WSP_N_TRANSFER];
535 	struct usb_fifo_sc sc_fifo;
536 
537 	const struct wsp_dev_params *sc_params;	/* device configuration */
538 
539 	mousehw_t sc_hw;
540 	mousemode_t sc_mode;
541 	u_int	sc_pollrate;
542 	mousestatus_t sc_status;
543 	u_int	sc_state;
544 #define	WSP_ENABLED	       0x01
545 
546 	struct tp_finger *index[MAX_FINGERS];	/* finger index data */
547 	int16_t	pos_x[MAX_FINGERS];	/* position array */
548 	int16_t	pos_y[MAX_FINGERS];	/* position array */
549 	u_int	sc_touch;		/* touch status */
550 #define	WSP_UNTOUCH		0x00
551 #define	WSP_FIRST_TOUCH		0x01
552 #define	WSP_SECOND_TOUCH	0x02
553 #define	WSP_TOUCHING		0x04
554 	int16_t	pre_pos_x;		/* previous position array */
555 	int16_t	pre_pos_y;		/* previous position array */
556 	int	dx_sum;			/* x axis cumulative movement */
557 	int	dy_sum;			/* y axis cumulative movement */
558 	int	dz_sum;			/* z axis cumulative movement */
559 	int	dz_count;
560 #define	WSP_DZ_MAX_COUNT	32
561 	int	dt_sum;			/* T-axis cumulative movement */
562 	int	rdx;			/* x axis remainder of divide by scale_factor */
563 	int	rdy;			/* y axis remainder of divide by scale_factor */
564 	int	rdz;			/* z axis remainder of divide by scale_factor */
565 	int	tp_datalen;
566 	uint8_t o_ntouch;		/* old touch finger status */
567 	uint8_t	finger;			/* 0 or 1 *, check which finger moving */
568 	uint16_t intr_count;
569 #define	WSP_TAP_THRESHOLD	3
570 #define	WSP_TAP_MAX_COUNT	20
571 	int	distance;		/* the distance of 2 fingers */
572 #define	MAX_DISTANCE		2500	/* the max allowed distance */
573 	uint8_t	ibtn;			/* button status in tapping */
574 	uint8_t	ntaps;			/* finger status in tapping */
575 	uint8_t	scr_mode;		/* scroll status in movement */
576 #define	WSP_SCR_NONE		0
577 #define	WSP_SCR_VER		1
578 #define	WSP_SCR_HOR		2
579 	uint8_t tp_data[WSP_BUFFER_MAX] __aligned(4);		/* trackpad transferred data */
580 };
581 
582 /*
583  * function prototypes
584  */
585 static usb_fifo_cmd_t wsp_start_read;
586 static usb_fifo_cmd_t wsp_stop_read;
587 static usb_fifo_open_t wsp_open;
588 static usb_fifo_close_t wsp_close;
589 static usb_fifo_ioctl_t wsp_ioctl;
590 
591 static struct usb_fifo_methods wsp_fifo_methods = {
592 	.f_open = &wsp_open,
593 	.f_close = &wsp_close,
594 	.f_ioctl = &wsp_ioctl,
595 	.f_start_read = &wsp_start_read,
596 	.f_stop_read = &wsp_stop_read,
597 	.basename[0] = WSP_DRIVER_NAME,
598 };
599 
600 /* device initialization and shutdown */
601 static int wsp_enable(struct wsp_softc *sc);
602 static void wsp_disable(struct wsp_softc *sc);
603 
604 /* updating fifo */
605 static void wsp_reset_buf(struct wsp_softc *sc);
606 static void wsp_add_to_queue(struct wsp_softc *, int, int, int, uint32_t);
607 
608 /* Device methods. */
609 static device_probe_t wsp_probe;
610 static device_attach_t wsp_attach;
611 static device_detach_t wsp_detach;
612 static usb_callback_t wsp_intr_callback;
613 
614 static const struct usb_config wsp_config[WSP_N_TRANSFER] = {
615 	[WSP_INTR_DT] = {
616 		.type = UE_INTERRUPT,
617 		.endpoint = UE_ADDR_ANY,
618 		.direction = UE_DIR_IN,
619 		.flags = {
620 			.pipe_bof = 0,
621 			.short_xfer_ok = 1,
622 		},
623 		.bufsize = WSP_BUFFER_MAX,
624 		.callback = &wsp_intr_callback,
625 	},
626 };
627 
628 static usb_error_t
629 wsp_set_device_mode(struct wsp_softc *sc, uint8_t on)
630 {
631 	const struct wsp_dev_params *params = sc->sc_params;
632 	uint8_t	mode_bytes[8];
633 	usb_error_t err;
634 
635 	/* Type 3 does not require a mode switch */
636 	if (params->tp_type == TYPE3)
637 		return 0;
638 
639 	err = usbd_req_get_report(sc->sc_usb_device, NULL,
640 	    mode_bytes, params->um_size, params->iface_index,
641 	    params->um_req_val, params->um_req_idx);
642 
643 	if (err != USB_ERR_NORMAL_COMPLETION) {
644 		DPRINTF("Failed to read device mode (%d)\n", err);
645 		return (err);
646 	}
647 
648 	/*
649 	 * XXX Need to wait at least 250ms for hardware to get
650 	 * ready. The device mode handling appears to be handled
651 	 * asynchronously and we should not issue these commands too
652 	 * quickly.
653 	 */
654 	pause("WHW", hz / 4);
655 
656 	mode_bytes[params->um_switch_idx] =
657 	    on ? params->um_switch_on : params->um_switch_off;
658 
659 	return (usbd_req_set_report(sc->sc_usb_device, NULL,
660 	    mode_bytes, params->um_size, params->iface_index,
661 	    params->um_req_val, params->um_req_idx));
662 }
663 
664 static int
665 wsp_enable(struct wsp_softc *sc)
666 {
667 	/* reset status */
668 	memset(&sc->sc_status, 0, sizeof(sc->sc_status));
669 	sc->sc_state |= WSP_ENABLED;
670 
671 	DPRINTFN(WSP_LLEVEL_INFO, "enabled wsp\n");
672 	return (0);
673 }
674 
675 static void
676 wsp_disable(struct wsp_softc *sc)
677 {
678 	sc->sc_state &= ~WSP_ENABLED;
679 	DPRINTFN(WSP_LLEVEL_INFO, "disabled wsp\n");
680 }
681 
682 static int
683 wsp_probe(device_t self)
684 {
685 	struct usb_attach_arg *uaa = device_get_ivars(self);
686 	struct usb_interface_descriptor *id;
687 	struct usb_interface *iface;
688 	uint8_t i;
689 
690 	if (uaa->usb_mode != USB_MODE_HOST)
691 		return (ENXIO);
692 
693 	/* figure out first interface matching */
694 	for (i = 1;; i++) {
695 		iface = usbd_get_iface(uaa->device, i);
696 		if (iface == NULL || i == 3)
697 			return (ENXIO);
698 		id = iface->idesc;
699 		if ((id == NULL) ||
700 		    (id->bInterfaceClass != UICLASS_HID) ||
701 		    (id->bInterfaceProtocol != 0 &&
702 		    id->bInterfaceProtocol != UIPROTO_MOUSE))
703 			continue;
704 		break;
705 	}
706 	/* check if we are attaching to the first match */
707 	if (uaa->info.bIfaceIndex != i)
708 		return (ENXIO);
709 	return (usbd_lookup_id_by_uaa(wsp_devs, sizeof(wsp_devs), uaa));
710 }
711 
712 static int
713 wsp_attach(device_t dev)
714 {
715 	struct wsp_softc *sc = device_get_softc(dev);
716 	struct usb_attach_arg *uaa = device_get_ivars(dev);
717 	usb_error_t err;
718 	void *d_ptr = NULL;
719 	uint16_t d_len;
720 
721 	DPRINTFN(WSP_LLEVEL_INFO, "sc=%p\n", sc);
722 
723 	/* Get HID descriptor */
724 	err = usbd_req_get_hid_desc(uaa->device, NULL, &d_ptr,
725 	    &d_len, M_TEMP, uaa->info.bIfaceIndex);
726 
727 	if (err == USB_ERR_NORMAL_COMPLETION) {
728 		/* Get HID report descriptor length */
729 		sc->tp_datalen = hid_report_size(d_ptr, d_len, hid_input, NULL);
730 		free(d_ptr, M_TEMP);
731 
732 		if (sc->tp_datalen <= 0 || sc->tp_datalen > WSP_BUFFER_MAX) {
733 			DPRINTF("Invalid datalength or too big "
734 			    "datalength: %d\n", sc->tp_datalen);
735 			return (ENXIO);
736 		}
737 	} else {
738 		return (ENXIO);
739 	}
740 
741 	sc->sc_usb_device = uaa->device;
742 
743 	/* get device specific configuration */
744 	sc->sc_params = wsp_dev_params + USB_GET_DRIVER_INFO(uaa);
745 
746 	/*
747 	 * By default the touchpad behaves like a HID device, sending
748 	 * packets with reportID = 8. Such reports contain only
749 	 * limited information. They encode movement deltas and button
750 	 * events, but do not include data from the pressure
751 	 * sensors. The device input mode can be switched from HID
752 	 * reports to raw sensor data using vendor-specific USB
753 	 * control commands:
754 	 */
755 
756 	/*
757 	 * During re-enumeration of the device we need to force the
758 	 * device back into HID mode before switching it to RAW
759 	 * mode. Else the device does not work like expected.
760 	 */
761 	err = wsp_set_device_mode(sc, 0);
762 	if (err != USB_ERR_NORMAL_COMPLETION) {
763 		DPRINTF("Failed to set mode to HID MODE (%d)\n", err);
764 		return (ENXIO);
765 	}
766 
767 	err = wsp_set_device_mode(sc, 1);
768 	if (err != USB_ERR_NORMAL_COMPLETION) {
769 		DPRINTF("failed to set mode to RAW MODE (%d)\n", err);
770 		return (ENXIO);
771 	}
772 
773 	mtx_init(&sc->sc_mutex, "wspmtx", NULL, MTX_DEF | MTX_RECURSE);
774 
775 	err = usbd_transfer_setup(uaa->device,
776 	    &uaa->info.bIfaceIndex, sc->sc_xfer, wsp_config,
777 	    WSP_N_TRANSFER, sc, &sc->sc_mutex);
778 	if (err) {
779 		DPRINTF("error=%s\n", usbd_errstr(err));
780 		goto detach;
781 	}
782 	if (usb_fifo_attach(sc->sc_usb_device, sc, &sc->sc_mutex,
783 	    &wsp_fifo_methods, &sc->sc_fifo,
784 	    device_get_unit(dev), -1, uaa->info.bIfaceIndex,
785 	    UID_ROOT, GID_OPERATOR, 0644)) {
786 		goto detach;
787 	}
788 	device_set_usb_desc(dev);
789 
790 	sc->sc_hw.buttons = 3;
791 	sc->sc_hw.iftype = MOUSE_IF_USB;
792 	sc->sc_hw.type = MOUSE_PAD;
793 	sc->sc_hw.model = MOUSE_MODEL_GENERIC;
794 	sc->sc_mode.protocol = MOUSE_PROTO_MSC;
795 	sc->sc_mode.rate = -1;
796 	sc->sc_mode.resolution = MOUSE_RES_UNKNOWN;
797 	sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE;
798 	sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK;
799 	sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC;
800 
801 	sc->sc_touch = WSP_UNTOUCH;
802 	sc->scr_mode = WSP_SCR_NONE;
803 
804 	return (0);
805 
806 detach:
807 	wsp_detach(dev);
808 	return (ENOMEM);
809 }
810 
811 static int
812 wsp_detach(device_t dev)
813 {
814 	struct wsp_softc *sc = device_get_softc(dev);
815 
816 	(void) wsp_set_device_mode(sc, 0);
817 
818 	mtx_lock(&sc->sc_mutex);
819 	if (sc->sc_state & WSP_ENABLED)
820 		wsp_disable(sc);
821 	mtx_unlock(&sc->sc_mutex);
822 
823 	usb_fifo_detach(&sc->sc_fifo);
824 
825 	usbd_transfer_unsetup(sc->sc_xfer, WSP_N_TRANSFER);
826 
827 	mtx_destroy(&sc->sc_mutex);
828 
829 	return (0);
830 }
831 
832 static void
833 wsp_intr_callback(struct usb_xfer *xfer, usb_error_t error)
834 {
835 	struct wsp_softc *sc = usbd_xfer_softc(xfer);
836 	const struct wsp_dev_params *params = sc->sc_params;
837 	struct usb_page_cache *pc;
838 	struct tp_finger *f;
839 	struct tp_header *h;
840 	struct wsp_tuning tun = wsp_tuning;
841 	int ntouch = 0;			/* the finger number in touch */
842 	int ibt = 0;			/* button status */
843 	int dx = 0;
844 	int dy = 0;
845 	int dz = 0;
846 	int rdx = 0;
847 	int rdy = 0;
848 	int rdz = 0;
849 	int len;
850 	int i;
851 
852 	wsp_runing_rangecheck(&tun);
853 
854 	if (sc->dz_count == 0)
855 		sc->dz_count = WSP_DZ_MAX_COUNT;
856 
857 	usbd_xfer_status(xfer, &len, NULL, NULL, NULL);
858 
859 	switch (USB_GET_STATE(xfer)) {
860 	case USB_ST_TRANSFERRED:
861 
862 		/* copy out received data */
863 		pc = usbd_xfer_get_frame(xfer, 0);
864 		usbd_copy_out(pc, 0, sc->tp_data, len);
865 
866 		if ((len < params->tp_offset + params->tp_fsize) ||
867 		    ((len - params->tp_offset) % params->tp_fsize) != 0) {
868 			DPRINTFN(WSP_LLEVEL_INFO, "Invalid length: %d, %x, %x\n",
869 			    len, sc->tp_data[0], sc->tp_data[1]);
870 			goto tr_setup;
871 		}
872 
873 		if (len < sc->tp_datalen) {
874 			/* make sure we don't process old data */
875 			memset(sc->tp_data + len, 0, sc->tp_datalen - len);
876 		}
877 
878 		h = (struct tp_header *)(sc->tp_data);
879 
880 		if (params->tp_type >= TYPE2) {
881 			ibt = sc->tp_data[params->tp_button];
882 			ntouch = sc->tp_data[params->tp_button - 1];
883 		}
884 		/* range check */
885 		if (ntouch < 0)
886 			ntouch = 0;
887 		else if (ntouch > MAX_FINGERS)
888 			ntouch = MAX_FINGERS;
889 
890 		for (i = 0; i != ntouch; i++) {
891 			f = (struct tp_finger *)(sc->tp_data + params->tp_offset + params->tp_delta + i * params->tp_fsize);
892 			/* swap endianness, if any */
893 			if (le16toh(0x1234) != 0x1234) {
894 				f->origin = le16toh((uint16_t)f->origin);
895 				f->abs_x = le16toh((uint16_t)f->abs_x);
896 				f->abs_y = le16toh((uint16_t)f->abs_y);
897 				f->rel_x = le16toh((uint16_t)f->rel_x);
898 				f->rel_y = le16toh((uint16_t)f->rel_y);
899 				f->tool_major = le16toh((uint16_t)f->tool_major);
900 				f->tool_minor = le16toh((uint16_t)f->tool_minor);
901 				f->orientation = le16toh((uint16_t)f->orientation);
902 				f->touch_major = le16toh((uint16_t)f->touch_major);
903 				f->touch_minor = le16toh((uint16_t)f->touch_minor);
904 				f->pressure = le16toh((uint16_t)f->pressure);
905 				f->multi = le16toh((uint16_t)f->multi);
906 			}
907 			DPRINTFN(WSP_LLEVEL_INFO,
908 			    "[%d]ibt=%d, taps=%d, o=%4d, ax=%5d, ay=%5d, "
909 			    "rx=%5d, ry=%5d, tlmaj=%4d, tlmin=%4d, ot=%4x, "
910 			    "tchmaj=%4d, tchmin=%4d, presure=%4d, m=%4x\n",
911 			    i, ibt, ntouch, f->origin, f->abs_x, f->abs_y,
912 			    f->rel_x, f->rel_y, f->tool_major, f->tool_minor, f->orientation,
913 			    f->touch_major, f->touch_minor, f->pressure, f->multi);
914 			sc->pos_x[i] = f->abs_x;
915 			sc->pos_y[i] = -f->abs_y;
916 			sc->index[i] = f;
917 		}
918 
919 		sc->sc_status.flags &= ~MOUSE_POSCHANGED;
920 		sc->sc_status.flags &= ~MOUSE_STDBUTTONSCHANGED;
921 		sc->sc_status.obutton = sc->sc_status.button;
922 		sc->sc_status.button = 0;
923 
924 		if (ibt != 0) {
925 			sc->sc_status.button |= MOUSE_BUTTON1DOWN;
926 			sc->ibtn = 1;
927 		}
928 		sc->intr_count++;
929 
930 		if (sc->ntaps < ntouch) {
931 			switch (ntouch) {
932 			case 1:
933 				if (sc->index[0]->touch_major > tun.pressure_tap_threshold &&
934 				    sc->index[0]->tool_major <= 1200)
935 					sc->ntaps = 1;
936 				break;
937 			case 2:
938 				if (sc->index[0]->touch_major > tun.pressure_tap_threshold-30 &&
939 				    sc->index[1]->touch_major > tun.pressure_tap_threshold-30)
940 					sc->ntaps = 2;
941 				break;
942 			case 3:
943 				if (sc->index[0]->touch_major > tun.pressure_tap_threshold-40 &&
944 				    sc->index[1]->touch_major > tun.pressure_tap_threshold-40 &&
945 				    sc->index[2]->touch_major > tun.pressure_tap_threshold-40)
946 					sc->ntaps = 3;
947 				break;
948 			default:
949 				break;
950 			}
951 		}
952 		if (ntouch == 2) {
953 			sc->distance = max(sc->distance, max(
954 			    abs(sc->pos_x[0] - sc->pos_x[1]),
955 			    abs(sc->pos_y[0] - sc->pos_y[1])));
956 		}
957 		if (sc->index[0]->touch_major < tun.pressure_untouch_threshold &&
958 		    sc->sc_status.button == 0) {
959 			sc->sc_touch = WSP_UNTOUCH;
960 			if (sc->intr_count < WSP_TAP_MAX_COUNT &&
961 			    sc->intr_count > WSP_TAP_THRESHOLD &&
962 			    sc->ntaps && sc->ibtn == 0) {
963 				/*
964 				 * Add a pair of events (button-down and
965 				 * button-up).
966 				 */
967 				switch (sc->ntaps) {
968 				case 1:
969 					if (!(params->caps & HAS_INTEGRATED_BUTTON)) {
970 						wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON1DOWN);
971 						DPRINTFN(WSP_LLEVEL_INFO, "LEFT CLICK!\n");
972 					}
973 					break;
974 				case 2:
975 					DPRINTFN(WSP_LLEVEL_INFO, "sum_x=%5d, sum_y=%5d\n",
976 					    sc->dx_sum, sc->dy_sum);
977 					if (sc->distance < MAX_DISTANCE && abs(sc->dx_sum) < 5 &&
978 					    abs(sc->dy_sum) < 5) {
979 						wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON3DOWN);
980 						DPRINTFN(WSP_LLEVEL_INFO, "RIGHT CLICK!\n");
981 					}
982 					break;
983 				case 3:
984 					wsp_add_to_queue(sc, 0, 0, 0, MOUSE_BUTTON2DOWN);
985 					break;
986 				default:
987 					/* we don't handle taps of more than three fingers */
988 					break;
989 				}
990 				wsp_add_to_queue(sc, 0, 0, 0, 0);	/* button release */
991 			}
992 			if ((sc->dt_sum / tun.scr_hor_threshold) != 0 &&
993 			    sc->ntaps == 2 && sc->scr_mode == WSP_SCR_HOR) {
994 
995 				/*
996 				 * translate T-axis into button presses
997 				 * until further
998 				 */
999 				if (sc->dt_sum > 0)
1000 					wsp_add_to_queue(sc, 0, 0, 0, 1UL << 3);
1001 				else if (sc->dt_sum < 0)
1002 					wsp_add_to_queue(sc, 0, 0, 0, 1UL << 4);
1003 			}
1004 			sc->dz_count = WSP_DZ_MAX_COUNT;
1005 			sc->dz_sum = 0;
1006 			sc->intr_count = 0;
1007 			sc->ibtn = 0;
1008 			sc->ntaps = 0;
1009 			sc->finger = 0;
1010 			sc->distance = 0;
1011 			sc->dt_sum = 0;
1012 			sc->dx_sum = 0;
1013 			sc->dy_sum = 0;
1014 			sc->rdx = 0;
1015 			sc->rdy = 0;
1016 			sc->rdz = 0;
1017 			sc->scr_mode = WSP_SCR_NONE;
1018 		} else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold &&
1019 		    sc->sc_touch == WSP_UNTOUCH) {	/* ignore first touch */
1020 			sc->sc_touch = WSP_FIRST_TOUCH;
1021 		} else if (sc->index[0]->touch_major >= tun.pressure_touch_threshold &&
1022 		    sc->sc_touch == WSP_FIRST_TOUCH) {	/* ignore second touch */
1023 			sc->sc_touch = WSP_SECOND_TOUCH;
1024 			DPRINTFN(WSP_LLEVEL_INFO, "Fist pre_x=%5d, pre_y=%5d\n",
1025 			    sc->pre_pos_x, sc->pre_pos_y);
1026 		} else {
1027 			if (sc->sc_touch == WSP_SECOND_TOUCH)
1028 				sc->sc_touch = WSP_TOUCHING;
1029 
1030 			if (ntouch != 0 &&
1031 			    sc->index[0]->touch_major >= tun.pressure_touch_threshold) {
1032 				dx = sc->pos_x[0] - sc->pre_pos_x;
1033 				dy = sc->pos_y[0] - sc->pre_pos_y;
1034 
1035 				/* Ignore movement during button is releasing */
1036 				if (sc->ibtn != 0 && sc->sc_status.button == 0)
1037 					dx = dy = 0;
1038 
1039 				/* Ignore movement if ntouch changed */
1040 				if (sc->o_ntouch != ntouch)
1041 					dx = dy = 0;
1042 
1043 				/* Ignore unexpeted movment when typing */
1044 				if (ntouch == 1 && sc->index[0]->tool_major > 1200)
1045 					dx = dy = 0;
1046 
1047 				if (sc->ibtn != 0 && ntouch == 1 &&
1048 				    sc->intr_count < WSP_TAP_MAX_COUNT &&
1049 				    abs(sc->dx_sum) < 1 && abs(sc->dy_sum) < 1 )
1050 					dx = dy = 0;
1051 
1052 				if (ntouch == 2 && sc->sc_status.button != 0) {
1053 					dx = sc->pos_x[sc->finger] - sc->pre_pos_x;
1054 					dy = sc->pos_y[sc->finger] - sc->pre_pos_y;
1055 
1056 					/*
1057 					 * Ignore movement of switch finger or
1058 					 * movement from ibt=0 to ibt=1
1059 					 */
1060 					if (sc->index[0]->origin == 0 || sc->index[1]->origin == 0 ||
1061 					    sc->sc_status.obutton != sc->sc_status.button) {
1062 						dx = dy = 0;
1063 						sc->finger = 0;
1064 					}
1065 					if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) <
1066 					    (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) &&
1067 					    sc->finger == 0) {
1068 						sc->sc_touch = WSP_SECOND_TOUCH;
1069 						dx = dy = 0;
1070 						sc->finger = 1;
1071 					}
1072 					if ((abs(sc->index[0]->rel_x) + abs(sc->index[0]->rel_y)) >=
1073 					    (abs(sc->index[1]->rel_x) + abs(sc->index[1]->rel_y)) &&
1074 					    sc->finger == 1) {
1075 						sc->sc_touch = WSP_SECOND_TOUCH;
1076 						dx = dy = 0;
1077 						sc->finger = 0;
1078 					}
1079 					DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, mov=%5d\n",
1080 					    dx, dy, sc->finger);
1081 				}
1082 				if (sc->dz_count--) {
1083 					rdz = (dy + sc->rdz) % tun.scale_factor;
1084 					sc->dz_sum -= (dy + sc->rdz) / tun.scale_factor;
1085 					sc->rdz = rdz;
1086 				}
1087 				if ((sc->dz_sum / tun.z_factor) != 0)
1088 					sc->dz_count = 0;
1089 			}
1090 			rdx = (dx + sc->rdx) % tun.scale_factor;
1091 			dx = (dx + sc->rdx) / tun.scale_factor;
1092 			sc->rdx = rdx;
1093 
1094 			rdy = (dy + sc->rdy) % tun.scale_factor;
1095 			dy = (dy + sc->rdy) / tun.scale_factor;
1096 			sc->rdy = rdy;
1097 
1098 			sc->dx_sum += dx;
1099 			sc->dy_sum += dy;
1100 
1101 			if (ntouch == 2 && sc->sc_status.button == 0) {
1102 				if (sc->scr_mode == WSP_SCR_NONE &&
1103 				    abs(sc->dx_sum) + abs(sc->dy_sum) > tun.scr_hor_threshold)
1104 					sc->scr_mode = abs(sc->dx_sum) >
1105 					    abs(sc->dy_sum) * 2 ? WSP_SCR_HOR : WSP_SCR_VER;
1106 				DPRINTFN(WSP_LLEVEL_INFO, "scr_mode=%5d, count=%d, dx_sum=%d, dy_sum=%d\n",
1107 				    sc->scr_mode, sc->intr_count, sc->dx_sum, sc->dy_sum);
1108 				if (sc->scr_mode == WSP_SCR_HOR)
1109 					sc->dt_sum += dx;
1110 				else
1111 					sc->dt_sum = 0;
1112 
1113 				dx = dy = 0;
1114 				if (sc->dz_count == 0)
1115 					dz = sc->dz_sum / tun.z_factor;
1116 				if (sc->scr_mode == WSP_SCR_HOR ||
1117 				    abs(sc->pos_x[0] - sc->pos_x[1]) > MAX_DISTANCE ||
1118 				    abs(sc->pos_y[0] - sc->pos_y[1]) > MAX_DISTANCE)
1119 					dz = 0;
1120 			}
1121 			if (ntouch == 3)
1122 				dx = dy = dz = 0;
1123 			if (sc->intr_count < WSP_TAP_MAX_COUNT &&
1124 			    abs(dx) < 3 && abs(dy) < 3 && abs(dz) < 3)
1125 				dx = dy = dz = 0;
1126 			else
1127 				sc->intr_count = WSP_TAP_MAX_COUNT;
1128 			if (dx || dy || dz)
1129 				sc->sc_status.flags |= MOUSE_POSCHANGED;
1130 			DPRINTFN(WSP_LLEVEL_INFO, "dx=%5d, dy=%5d, dz=%5d, sc_touch=%x, btn=%x\n",
1131 			    dx, dy, dz, sc->sc_touch, sc->sc_status.button);
1132 			sc->sc_status.dx += dx;
1133 			sc->sc_status.dy += dy;
1134 			sc->sc_status.dz += dz;
1135 
1136 			wsp_add_to_queue(sc, dx, -dy, dz, sc->sc_status.button);
1137 			if (sc->dz_count == 0) {
1138 				sc->dz_sum = 0;
1139 				sc->rdz = 0;
1140 			}
1141 
1142 		}
1143 		sc->pre_pos_x = sc->pos_x[0];
1144 		sc->pre_pos_y = sc->pos_y[0];
1145 
1146 		if (ntouch == 2 && sc->sc_status.button != 0) {
1147 			sc->pre_pos_x = sc->pos_x[sc->finger];
1148 			sc->pre_pos_y = sc->pos_y[sc->finger];
1149 		}
1150 		sc->o_ntouch = ntouch;
1151 
1152 	case USB_ST_SETUP:
1153 tr_setup:
1154 		/* check if we can put more data into the FIFO */
1155 		if (usb_fifo_put_bytes_max(
1156 		    sc->sc_fifo.fp[USB_FIFO_RX]) != 0) {
1157 			usbd_xfer_set_frame_len(xfer, 0,
1158 			    sc->tp_datalen);
1159 			usbd_transfer_submit(xfer);
1160 		}
1161 		break;
1162 
1163 	default:			/* Error */
1164 		if (error != USB_ERR_CANCELLED) {
1165 			/* try clear stall first */
1166 			usbd_xfer_set_stall(xfer);
1167 			goto tr_setup;
1168 		}
1169 		break;
1170 	}
1171 }
1172 
1173 static void
1174 wsp_add_to_queue(struct wsp_softc *sc, int dx, int dy, int dz,
1175     uint32_t buttons_in)
1176 {
1177 	uint32_t buttons_out;
1178 	uint8_t buf[8];
1179 
1180 	dx = imin(dx, 254);
1181 	dx = imax(dx, -256);
1182 	dy = imin(dy, 254);
1183 	dy = imax(dy, -256);
1184 	dz = imin(dz, 126);
1185 	dz = imax(dz, -128);
1186 
1187 	buttons_out = MOUSE_MSC_BUTTONS;
1188 	if (buttons_in & MOUSE_BUTTON1DOWN)
1189 		buttons_out &= ~MOUSE_MSC_BUTTON1UP;
1190 	else if (buttons_in & MOUSE_BUTTON2DOWN)
1191 		buttons_out &= ~MOUSE_MSC_BUTTON2UP;
1192 	else if (buttons_in & MOUSE_BUTTON3DOWN)
1193 		buttons_out &= ~MOUSE_MSC_BUTTON3UP;
1194 
1195 	/* Encode the mouse data in standard format; refer to mouse(4) */
1196 	buf[0] = sc->sc_mode.syncmask[1];
1197 	buf[0] |= buttons_out;
1198 	buf[1] = dx >> 1;
1199 	buf[2] = dy >> 1;
1200 	buf[3] = dx - (dx >> 1);
1201 	buf[4] = dy - (dy >> 1);
1202 	/* Encode extra bytes for level 1 */
1203 	if (sc->sc_mode.level == 1) {
1204 		buf[5] = dz >> 1;	/* dz / 2 */
1205 		buf[6] = dz - (dz >> 1);/* dz - (dz / 2) */
1206 		buf[7] = (((~buttons_in) >> 3) & MOUSE_SYS_EXTBUTTONS);
1207 	}
1208 	usb_fifo_put_data_linear(sc->sc_fifo.fp[USB_FIFO_RX], buf,
1209 	    sc->sc_mode.packetsize, 1);
1210 }
1211 
1212 static void
1213 wsp_reset_buf(struct wsp_softc *sc)
1214 {
1215 	/* reset read queue */
1216 	usb_fifo_reset(sc->sc_fifo.fp[USB_FIFO_RX]);
1217 }
1218 
1219 static void
1220 wsp_start_read(struct usb_fifo *fifo)
1221 {
1222 	struct wsp_softc *sc = usb_fifo_softc(fifo);
1223 	int rate;
1224 
1225 	/* Check if we should override the default polling interval */
1226 	rate = sc->sc_pollrate;
1227 	/* Range check rate */
1228 	if (rate > 1000)
1229 		rate = 1000;
1230 	/* Check for set rate */
1231 	if ((rate > 0) && (sc->sc_xfer[WSP_INTR_DT] != NULL)) {
1232 		/* Stop current transfer, if any */
1233 		usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]);
1234 		/* Set new interval */
1235 		usbd_xfer_set_interval(sc->sc_xfer[WSP_INTR_DT], 1000 / rate);
1236 		/* Only set pollrate once */
1237 		sc->sc_pollrate = 0;
1238 	}
1239 	usbd_transfer_start(sc->sc_xfer[WSP_INTR_DT]);
1240 }
1241 
1242 static void
1243 wsp_stop_read(struct usb_fifo *fifo)
1244 {
1245 	struct wsp_softc *sc = usb_fifo_softc(fifo);
1246 
1247 	usbd_transfer_stop(sc->sc_xfer[WSP_INTR_DT]);
1248 }
1249 
1250 
1251 static int
1252 wsp_open(struct usb_fifo *fifo, int fflags)
1253 {
1254 	DPRINTFN(WSP_LLEVEL_INFO, "\n");
1255 
1256 	if (fflags & FREAD) {
1257 		struct wsp_softc *sc = usb_fifo_softc(fifo);
1258 		int rc;
1259 
1260 		if (sc->sc_state & WSP_ENABLED)
1261 			return (EBUSY);
1262 
1263 		if (usb_fifo_alloc_buffer(fifo,
1264 		    WSP_FIFO_BUF_SIZE, WSP_FIFO_QUEUE_MAXLEN)) {
1265 			return (ENOMEM);
1266 		}
1267 		rc = wsp_enable(sc);
1268 		if (rc != 0) {
1269 			usb_fifo_free_buffer(fifo);
1270 			return (rc);
1271 		}
1272 	}
1273 	return (0);
1274 }
1275 
1276 static void
1277 wsp_close(struct usb_fifo *fifo, int fflags)
1278 {
1279 	if (fflags & FREAD) {
1280 		struct wsp_softc *sc = usb_fifo_softc(fifo);
1281 
1282 		wsp_disable(sc);
1283 		usb_fifo_free_buffer(fifo);
1284 	}
1285 }
1286 
1287 int
1288 wsp_ioctl(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags)
1289 {
1290 	struct wsp_softc *sc = usb_fifo_softc(fifo);
1291 	mousemode_t mode;
1292 	int error = 0;
1293 
1294 	mtx_lock(&sc->sc_mutex);
1295 
1296 	switch (cmd) {
1297 	case MOUSE_GETHWINFO:
1298 		*(mousehw_t *)addr = sc->sc_hw;
1299 		break;
1300 	case MOUSE_GETMODE:
1301 		*(mousemode_t *)addr = sc->sc_mode;
1302 		break;
1303 	case MOUSE_SETMODE:
1304 		mode = *(mousemode_t *)addr;
1305 
1306 		if (mode.level == -1)
1307 			/* Don't change the current setting */
1308 			;
1309 		else if ((mode.level < 0) || (mode.level > 1)) {
1310 			error = EINVAL;
1311 			goto done;
1312 		}
1313 		sc->sc_mode.level = mode.level;
1314 		sc->sc_pollrate = mode.rate;
1315 		sc->sc_hw.buttons = 3;
1316 
1317 		if (sc->sc_mode.level == 0) {
1318 			sc->sc_mode.protocol = MOUSE_PROTO_MSC;
1319 			sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE;
1320 			sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK;
1321 			sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC;
1322 		} else if (sc->sc_mode.level == 1) {
1323 			sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE;
1324 			sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE;
1325 			sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK;
1326 			sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC;
1327 		}
1328 		wsp_reset_buf(sc);
1329 		break;
1330 	case MOUSE_GETLEVEL:
1331 		*(int *)addr = sc->sc_mode.level;
1332 		break;
1333 	case MOUSE_SETLEVEL:
1334 		if (*(int *)addr < 0 || *(int *)addr > 1) {
1335 			error = EINVAL;
1336 			goto done;
1337 		}
1338 		sc->sc_mode.level = *(int *)addr;
1339 		sc->sc_hw.buttons = 3;
1340 
1341 		if (sc->sc_mode.level == 0) {
1342 			sc->sc_mode.protocol = MOUSE_PROTO_MSC;
1343 			sc->sc_mode.packetsize = MOUSE_MSC_PACKETSIZE;
1344 			sc->sc_mode.syncmask[0] = MOUSE_MSC_SYNCMASK;
1345 			sc->sc_mode.syncmask[1] = MOUSE_MSC_SYNC;
1346 		} else if (sc->sc_mode.level == 1) {
1347 			sc->sc_mode.protocol = MOUSE_PROTO_SYSMOUSE;
1348 			sc->sc_mode.packetsize = MOUSE_SYS_PACKETSIZE;
1349 			sc->sc_mode.syncmask[0] = MOUSE_SYS_SYNCMASK;
1350 			sc->sc_mode.syncmask[1] = MOUSE_SYS_SYNC;
1351 		}
1352 		wsp_reset_buf(sc);
1353 		break;
1354 	case MOUSE_GETSTATUS:{
1355 			mousestatus_t *status = (mousestatus_t *)addr;
1356 
1357 			*status = sc->sc_status;
1358 			sc->sc_status.obutton = sc->sc_status.button;
1359 			sc->sc_status.button = 0;
1360 			sc->sc_status.dx = 0;
1361 			sc->sc_status.dy = 0;
1362 			sc->sc_status.dz = 0;
1363 
1364 			if (status->dx || status->dy || status->dz)
1365 				status->flags |= MOUSE_POSCHANGED;
1366 			if (status->button != status->obutton)
1367 				status->flags |= MOUSE_BUTTONSCHANGED;
1368 			break;
1369 		}
1370 	default:
1371 		error = ENOTTY;
1372 	}
1373 
1374 done:
1375 	mtx_unlock(&sc->sc_mutex);
1376 	return (error);
1377 }
1378 
1379 static device_method_t wsp_methods[] = {
1380 	/* Device interface */
1381 	DEVMETHOD(device_probe, wsp_probe),
1382 	DEVMETHOD(device_attach, wsp_attach),
1383 	DEVMETHOD(device_detach, wsp_detach),
1384 	DEVMETHOD_END
1385 };
1386 
1387 static driver_t wsp_driver = {
1388 	.name = WSP_DRIVER_NAME,
1389 	.methods = wsp_methods,
1390 	.size = sizeof(struct wsp_softc)
1391 };
1392 
1393 static devclass_t wsp_devclass;
1394 
1395 DRIVER_MODULE(wsp, uhub, wsp_driver, wsp_devclass, NULL, 0);
1396 MODULE_DEPEND(wsp, usb, 1, 1, 1);
1397 MODULE_VERSION(wsp, 1);
1398 USB_PNP_HOST_INFO(wsp_devs);
1399