1 #include <sys/cdefs.h> 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause 4 * 5 * Copyright (c) 1998 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart@augustsson.net) at 10 * Carlstedt Research & Technology. 11 * 12 * Redistribution and use in source and binary forms, with or without 13 * modification, are permitted provided that the following conditions 14 * are met: 15 * 1. Redistributions of source code must retain the above copyright 16 * notice, this list of conditions and the following disclaimer. 17 * 2. Redistributions in binary form must reproduce the above copyright 18 * notice, this list of conditions and the following disclaimer in the 19 * documentation and/or other materials provided with the distribution. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 23 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 24 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 25 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 26 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 27 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 28 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 29 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 30 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 31 * POSSIBILITY OF SUCH DAMAGE. 32 * 33 */ 34 35 /* 36 * HID spec: http://www.usb.org/developers/devclass_docs/HID1_11.pdf 37 */ 38 39 #include "opt_kbd.h" 40 #include "opt_ukbd.h" 41 #include "opt_evdev.h" 42 43 #include <sys/stdint.h> 44 #include <sys/stddef.h> 45 #include <sys/param.h> 46 #include <sys/queue.h> 47 #include <sys/types.h> 48 #include <sys/systm.h> 49 #include <sys/kernel.h> 50 #include <sys/bus.h> 51 #include <sys/module.h> 52 #include <sys/lock.h> 53 #include <sys/mutex.h> 54 #include <sys/condvar.h> 55 #include <sys/sysctl.h> 56 #include <sys/sx.h> 57 #include <sys/unistd.h> 58 #include <sys/callout.h> 59 #include <sys/malloc.h> 60 #include <sys/priv.h> 61 #include <sys/proc.h> 62 63 #include <dev/hid/hid.h> 64 65 #include <dev/usb/usb.h> 66 #include <dev/usb/usbdi.h> 67 #include <dev/usb/usbdi_util.h> 68 #include <dev/usb/usbhid.h> 69 70 #define USB_DEBUG_VAR ukbd_debug 71 #include <dev/usb/usb_debug.h> 72 73 #include <dev/usb/quirk/usb_quirk.h> 74 75 #ifdef EVDEV_SUPPORT 76 #include <dev/evdev/input.h> 77 #include <dev/evdev/evdev.h> 78 #endif 79 80 #include <sys/ioccom.h> 81 #include <sys/filio.h> 82 #include <sys/kbio.h> 83 84 #include <dev/kbd/kbdreg.h> 85 86 /* the initial key map, accent map and fkey strings */ 87 #if defined(UKBD_DFLT_KEYMAP) && !defined(KLD_MODULE) 88 #define KBD_DFLT_KEYMAP 89 #include "ukbdmap.h" 90 #endif 91 92 /* the following file must be included after "ukbdmap.h" */ 93 #include <dev/kbd/kbdtables.h> 94 95 #ifdef USB_DEBUG 96 static int ukbd_debug = 0; 97 static int ukbd_no_leds = 0; 98 static int ukbd_pollrate = 0; 99 100 static SYSCTL_NODE(_hw_usb, OID_AUTO, ukbd, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 101 "USB keyboard"); 102 SYSCTL_INT(_hw_usb_ukbd, OID_AUTO, debug, CTLFLAG_RWTUN, 103 &ukbd_debug, 0, "Debug level"); 104 SYSCTL_INT(_hw_usb_ukbd, OID_AUTO, no_leds, CTLFLAG_RWTUN, 105 &ukbd_no_leds, 0, "Disables setting of keyboard leds"); 106 SYSCTL_INT(_hw_usb_ukbd, OID_AUTO, pollrate, CTLFLAG_RWTUN, 107 &ukbd_pollrate, 0, "Force this polling rate, 1-1000Hz"); 108 #endif 109 110 #define UKBD_EMULATE_ATSCANCODE 1 111 #define UKBD_DRIVER_NAME "ukbd" 112 #define UKBD_NKEYCODE 256 /* units */ 113 #define UKBD_IN_BUF_SIZE (4 * UKBD_NKEYCODE) /* scancodes */ 114 #define UKBD_IN_BUF_FULL ((UKBD_IN_BUF_SIZE / 2) - 1) /* scancodes */ 115 #define UKBD_NFKEY (sizeof(fkey_tab)/sizeof(fkey_tab[0])) /* units */ 116 #define UKBD_BUFFER_SIZE 64 /* bytes */ 117 #define UKBD_KEY_PRESSED(map, key) ({ \ 118 CTASSERT((key) >= 0 && (key) < UKBD_NKEYCODE); \ 119 ((map)[(key) / 64] & (1ULL << ((key) % 64))); \ 120 }) 121 122 #define MOD_EJECT 0x01 123 #define MOD_FN 0x02 124 125 struct ukbd_data { 126 uint64_t bitmap[howmany(UKBD_NKEYCODE, 64)]; 127 }; 128 129 enum { 130 UKBD_INTR_DT_0, 131 UKBD_INTR_DT_1, 132 UKBD_CTRL_LED, 133 UKBD_N_TRANSFER, 134 }; 135 136 struct ukbd_softc { 137 keyboard_t sc_kbd; 138 keymap_t sc_keymap; 139 accentmap_t sc_accmap; 140 fkeytab_t sc_fkeymap[UKBD_NFKEY]; 141 uint64_t sc_loc_key_valid[howmany(UKBD_NKEYCODE, 64)]; 142 struct hid_location sc_loc_apple_eject; 143 struct hid_location sc_loc_apple_fn; 144 struct hid_location sc_loc_key[UKBD_NKEYCODE]; 145 struct hid_location sc_loc_numlock; 146 struct hid_location sc_loc_capslock; 147 struct hid_location sc_loc_scrolllock; 148 struct usb_callout sc_callout; 149 struct ukbd_data sc_ndata; 150 struct ukbd_data sc_odata; 151 152 struct thread *sc_poll_thread; 153 struct usb_device *sc_udev; 154 struct usb_interface *sc_iface; 155 struct usb_xfer *sc_xfer[UKBD_N_TRANSFER]; 156 #ifdef EVDEV_SUPPORT 157 struct evdev_dev *sc_evdev; 158 #endif 159 160 sbintime_t sc_co_basetime; 161 int sc_delay; 162 uint32_t sc_repeat_time; 163 uint32_t sc_input[UKBD_IN_BUF_SIZE]; /* input buffer */ 164 uint32_t sc_time_ms; 165 uint32_t sc_composed_char; /* composed char code, if non-zero */ 166 #ifdef UKBD_EMULATE_ATSCANCODE 167 uint32_t sc_buffered_char[2]; 168 #endif 169 uint32_t sc_flags; /* flags */ 170 #define UKBD_FLAG_COMPOSE 0x00000001 171 #define UKBD_FLAG_POLLING 0x00000002 172 #define UKBD_FLAG_SET_LEDS 0x00000004 173 #define UKBD_FLAG_ATTACHED 0x00000010 174 #define UKBD_FLAG_GONE 0x00000020 175 176 #define UKBD_FLAG_HID_MASK 0x003fffc0 177 #define UKBD_FLAG_APPLE_EJECT 0x00000040 178 #define UKBD_FLAG_APPLE_FN 0x00000080 179 #define UKBD_FLAG_APPLE_SWAP 0x00000100 180 #define UKBD_FLAG_NUMLOCK 0x00080000 181 #define UKBD_FLAG_CAPSLOCK 0x00100000 182 #define UKBD_FLAG_SCROLLLOCK 0x00200000 183 184 int sc_mode; /* input mode (K_XLATE,K_RAW,K_CODE) */ 185 int sc_state; /* shift/lock key state */ 186 int sc_accents; /* accent key index (> 0) */ 187 int sc_polling; /* polling recursion count */ 188 int sc_led_size; 189 int sc_kbd_size; 190 191 uint16_t sc_inputs; 192 uint16_t sc_inputhead; 193 uint16_t sc_inputtail; 194 195 uint8_t sc_leds; /* store for async led requests */ 196 uint8_t sc_iface_index; 197 uint8_t sc_iface_no; 198 uint8_t sc_id_apple_eject; 199 uint8_t sc_id_apple_fn; 200 uint8_t sc_id_loc_key[UKBD_NKEYCODE]; 201 uint8_t sc_id_numlock; 202 uint8_t sc_id_capslock; 203 uint8_t sc_id_scrolllock; 204 uint8_t sc_kbd_id; 205 uint8_t sc_repeat_key; 206 207 uint8_t sc_buffer[UKBD_BUFFER_SIZE]; 208 }; 209 210 #define KEY_NONE 0x00 211 #define KEY_ERROR 0x01 212 213 #define KEY_PRESS 0 214 #define KEY_RELEASE 0x400 215 #define KEY_INDEX(c) ((c) & 0xFF) 216 217 #define SCAN_PRESS 0 218 #define SCAN_RELEASE 0x80 219 #define SCAN_PREFIX_E0 0x100 220 #define SCAN_PREFIX_E1 0x200 221 #define SCAN_PREFIX_CTL 0x400 222 #define SCAN_PREFIX_SHIFT 0x800 223 #define SCAN_PREFIX (SCAN_PREFIX_E0 | SCAN_PREFIX_E1 | \ 224 SCAN_PREFIX_CTL | SCAN_PREFIX_SHIFT) 225 #define SCAN_CHAR(c) ((c) & 0x7f) 226 227 #define UKBD_LOCK() USB_MTX_LOCK(&Giant) 228 #define UKBD_UNLOCK() USB_MTX_UNLOCK(&Giant) 229 #define UKBD_LOCK_ASSERT() USB_MTX_ASSERT(&Giant, MA_OWNED) 230 231 #define NN 0 /* no translation */ 232 /* 233 * Translate USB keycodes to AT keyboard scancodes. 234 */ 235 /* 236 * FIXME: Mac USB keyboard generates: 237 * 0x53: keypad NumLock/Clear 238 * 0x66: Power 239 * 0x67: keypad = 240 * 0x68: F13 241 * 0x69: F14 242 * 0x6a: F15 243 * 244 * USB Apple Keyboard JIS generates: 245 * 0x90: Kana 246 * 0x91: Eisu 247 */ 248 static const uint8_t ukbd_trtab[256] = { 249 0, 0, 0, 0, 30, 48, 46, 32, /* 00 - 07 */ 250 18, 33, 34, 35, 23, 36, 37, 38, /* 08 - 0F */ 251 50, 49, 24, 25, 16, 19, 31, 20, /* 10 - 17 */ 252 22, 47, 17, 45, 21, 44, 2, 3, /* 18 - 1F */ 253 4, 5, 6, 7, 8, 9, 10, 11, /* 20 - 27 */ 254 28, 1, 14, 15, 57, 12, 13, 26, /* 28 - 2F */ 255 27, 43, 43, 39, 40, 41, 51, 52, /* 30 - 37 */ 256 53, 58, 59, 60, 61, 62, 63, 64, /* 38 - 3F */ 257 65, 66, 67, 68, 87, 88, 92, 70, /* 40 - 47 */ 258 104, 102, 94, 96, 103, 99, 101, 98, /* 48 - 4F */ 259 97, 100, 95, 69, 91, 55, 74, 78,/* 50 - 57 */ 260 89, 79, 80, 81, 75, 76, 77, 71, /* 58 - 5F */ 261 72, 73, 82, 83, 86, 107, 122, NN, /* 60 - 67 */ 262 NN, NN, NN, NN, NN, NN, NN, NN, /* 68 - 6F */ 263 NN, NN, NN, NN, 115, 108, 111, 113, /* 70 - 77 */ 264 109, 110, 112, 118, 114, 116, 117, 119, /* 78 - 7F */ 265 121, 120, NN, NN, NN, NN, NN, 123, /* 80 - 87 */ 266 124, 125, 126, 127, 128, NN, NN, NN, /* 88 - 8F */ 267 129, 130, NN, NN, NN, NN, NN, NN, /* 90 - 97 */ 268 NN, NN, NN, NN, NN, NN, NN, NN, /* 98 - 9F */ 269 NN, NN, NN, NN, NN, NN, NN, NN, /* A0 - A7 */ 270 NN, NN, NN, NN, NN, NN, NN, NN, /* A8 - AF */ 271 NN, NN, NN, NN, NN, NN, NN, NN, /* B0 - B7 */ 272 NN, NN, NN, NN, NN, NN, NN, NN, /* B8 - BF */ 273 NN, NN, NN, NN, NN, NN, NN, NN, /* C0 - C7 */ 274 NN, NN, NN, NN, NN, NN, NN, NN, /* C8 - CF */ 275 NN, NN, NN, NN, NN, NN, NN, NN, /* D0 - D7 */ 276 NN, NN, NN, NN, NN, NN, NN, NN, /* D8 - DF */ 277 29, 42, 56, 105, 90, 54, 93, 106, /* E0 - E7 */ 278 NN, NN, NN, NN, NN, NN, NN, NN, /* E8 - EF */ 279 NN, NN, NN, NN, NN, NN, NN, NN, /* F0 - F7 */ 280 NN, NN, NN, NN, NN, NN, NN, NN, /* F8 - FF */ 281 }; 282 283 static const uint8_t ukbd_boot_desc[] = { 284 0x05, 0x01, 0x09, 0x06, 0xa1, 285 0x01, 0x05, 0x07, 0x19, 0xe0, 286 0x29, 0xe7, 0x15, 0x00, 0x25, 287 0x01, 0x75, 0x01, 0x95, 0x08, 288 0x81, 0x02, 0x95, 0x01, 0x75, 289 0x08, 0x81, 0x01, 0x95, 0x03, 290 0x75, 0x01, 0x05, 0x08, 0x19, 291 0x01, 0x29, 0x03, 0x91, 0x02, 292 0x95, 0x05, 0x75, 0x01, 0x91, 293 0x01, 0x95, 0x06, 0x75, 0x08, 294 0x15, 0x00, 0x26, 0xff, 0x00, 295 0x05, 0x07, 0x19, 0x00, 0x2a, 296 0xff, 0x00, 0x81, 0x00, 0xc0 297 }; 298 299 /* prototypes */ 300 static void ukbd_timeout(void *); 301 static void ukbd_set_leds(struct ukbd_softc *, uint8_t); 302 static int ukbd_set_typematic(keyboard_t *, int); 303 #ifdef UKBD_EMULATE_ATSCANCODE 304 static uint32_t ukbd_atkeycode(int, const uint64_t *); 305 static int ukbd_key2scan(struct ukbd_softc *, int, const uint64_t *, int); 306 #endif 307 static uint32_t ukbd_read_char(keyboard_t *, int); 308 static void ukbd_clear_state(keyboard_t *); 309 static int ukbd_ioctl(keyboard_t *, u_long, caddr_t); 310 static int ukbd_enable(keyboard_t *); 311 static int ukbd_disable(keyboard_t *); 312 static void ukbd_interrupt(struct ukbd_softc *); 313 static void ukbd_event_keyinput(struct ukbd_softc *); 314 315 static device_probe_t ukbd_probe; 316 static device_attach_t ukbd_attach; 317 static device_detach_t ukbd_detach; 318 static device_resume_t ukbd_resume; 319 320 #ifdef EVDEV_SUPPORT 321 static evdev_event_t ukbd_ev_event; 322 323 static const struct evdev_methods ukbd_evdev_methods = { 324 .ev_event = ukbd_ev_event, 325 }; 326 #endif 327 328 static bool 329 ukbd_any_key_pressed(struct ukbd_softc *sc) 330 { 331 bool ret = false; 332 unsigned i; 333 334 for (i = 0; i != howmany(UKBD_NKEYCODE, 64); i++) 335 ret |= (sc->sc_odata.bitmap[i] != 0); 336 return (ret); 337 } 338 339 static bool 340 ukbd_any_key_valid(struct ukbd_softc *sc) 341 { 342 bool ret = false; 343 unsigned i; 344 345 for (i = 0; i != howmany(UKBD_NKEYCODE, 64); i++) 346 ret |= (sc->sc_loc_key_valid[i] != 0); 347 return (ret); 348 } 349 350 static bool 351 ukbd_is_modifier_key(uint32_t key) 352 { 353 354 return (key >= 0xe0 && key <= 0xe7); 355 } 356 357 static void 358 ukbd_start_timer(struct ukbd_softc *sc) 359 { 360 sbintime_t delay, now, prec; 361 362 now = sbinuptime(); 363 364 /* check if initial delay passed and fallback to key repeat delay */ 365 if (sc->sc_delay == 0) 366 sc->sc_delay = sc->sc_kbd.kb_delay2; 367 368 /* compute timeout */ 369 delay = SBT_1MS * sc->sc_delay; 370 sc->sc_co_basetime += delay; 371 372 /* check if we are running behind */ 373 if (sc->sc_co_basetime < now) 374 sc->sc_co_basetime = now; 375 376 /* This is rarely called, so prefer precision to efficiency. */ 377 prec = qmin(delay >> 7, SBT_1MS * 10); 378 usb_callout_reset_sbt(&sc->sc_callout, sc->sc_co_basetime, prec, 379 ukbd_timeout, sc, C_ABSOLUTE); 380 } 381 382 static void 383 ukbd_put_key(struct ukbd_softc *sc, uint32_t key) 384 { 385 386 UKBD_LOCK_ASSERT(); 387 388 DPRINTF("0x%02x (%d) %s\n", key, key, 389 (key & KEY_RELEASE) ? "released" : "pressed"); 390 391 #ifdef EVDEV_SUPPORT 392 if (evdev_rcpt_mask & EVDEV_RCPT_HW_KBD && sc->sc_evdev != NULL) 393 evdev_push_event(sc->sc_evdev, EV_KEY, 394 evdev_hid2key(KEY_INDEX(key)), !(key & KEY_RELEASE)); 395 if (sc->sc_evdev != NULL && evdev_is_grabbed(sc->sc_evdev)) 396 return; 397 #endif 398 399 if (sc->sc_inputs < UKBD_IN_BUF_SIZE) { 400 sc->sc_input[sc->sc_inputtail] = key; 401 ++(sc->sc_inputs); 402 ++(sc->sc_inputtail); 403 if (sc->sc_inputtail >= UKBD_IN_BUF_SIZE) { 404 sc->sc_inputtail = 0; 405 } 406 } else { 407 DPRINTF("input buffer is full\n"); 408 } 409 } 410 411 static void 412 ukbd_do_poll(struct ukbd_softc *sc, uint8_t wait) 413 { 414 415 UKBD_LOCK_ASSERT(); 416 KASSERT((sc->sc_flags & UKBD_FLAG_POLLING) != 0, 417 ("ukbd_do_poll called when not polling\n")); 418 DPRINTFN(2, "polling\n"); 419 420 if (USB_IN_POLLING_MODE_FUNC() == 0) { 421 /* 422 * In this context the kernel is polling for input, 423 * but the USB subsystem works in normal interrupt-driven 424 * mode, so we just wait on the USB threads to do the job. 425 * Note that we currently hold the Giant, but it's also used 426 * as the transfer mtx, so we must release it while waiting. 427 */ 428 while (sc->sc_inputs == 0) { 429 /* 430 * Give USB threads a chance to run. Note that 431 * kern_yield performs DROP_GIANT + PICKUP_GIANT. 432 */ 433 kern_yield(PRI_UNCHANGED); 434 if (!wait) 435 break; 436 } 437 return; 438 } 439 440 while (sc->sc_inputs == 0) { 441 usbd_transfer_poll(sc->sc_xfer, UKBD_N_TRANSFER); 442 443 /* Delay-optimised support for repetition of keys */ 444 if (ukbd_any_key_pressed(sc)) { 445 /* a key is pressed - need timekeeping */ 446 DELAY(1000); 447 448 /* 1 millisecond has passed */ 449 sc->sc_time_ms += 1; 450 } 451 452 ukbd_interrupt(sc); 453 454 if (!wait) 455 break; 456 } 457 } 458 459 static int32_t 460 ukbd_get_key(struct ukbd_softc *sc, uint8_t wait) 461 { 462 int32_t c; 463 464 UKBD_LOCK_ASSERT(); 465 KASSERT((USB_IN_POLLING_MODE_FUNC() == 0) || 466 (sc->sc_flags & UKBD_FLAG_POLLING) != 0, 467 ("not polling in kdb or panic\n")); 468 469 if (sc->sc_inputs == 0 && 470 (sc->sc_flags & UKBD_FLAG_GONE) == 0) { 471 /* start transfer, if not already started */ 472 usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_0]); 473 usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_1]); 474 } 475 476 if (sc->sc_flags & UKBD_FLAG_POLLING) 477 ukbd_do_poll(sc, wait); 478 479 if (sc->sc_inputs == 0) { 480 c = -1; 481 } else { 482 c = sc->sc_input[sc->sc_inputhead]; 483 --(sc->sc_inputs); 484 ++(sc->sc_inputhead); 485 if (sc->sc_inputhead >= UKBD_IN_BUF_SIZE) { 486 sc->sc_inputhead = 0; 487 } 488 } 489 return (c); 490 } 491 492 static void 493 ukbd_interrupt(struct ukbd_softc *sc) 494 { 495 const uint32_t now = sc->sc_time_ms; 496 unsigned key; 497 498 UKBD_LOCK_ASSERT(); 499 500 /* Check for modifier key changes first */ 501 for (key = 0xe0; key != 0xe8; key++) { 502 const uint64_t mask = 1ULL << (key % 64); 503 const uint64_t delta = 504 sc->sc_odata.bitmap[key / 64] ^ 505 sc->sc_ndata.bitmap[key / 64]; 506 507 if (delta & mask) { 508 if (sc->sc_odata.bitmap[key / 64] & mask) 509 ukbd_put_key(sc, key | KEY_RELEASE); 510 else 511 ukbd_put_key(sc, key | KEY_PRESS); 512 } 513 } 514 515 /* Check for key changes */ 516 for (key = 0; key != UKBD_NKEYCODE; key++) { 517 const uint64_t mask = 1ULL << (key % 64); 518 const uint64_t delta = 519 sc->sc_odata.bitmap[key / 64] ^ 520 sc->sc_ndata.bitmap[key / 64]; 521 522 if (mask == 1 && delta == 0) { 523 key += 63; 524 continue; /* skip empty areas */ 525 } else if (ukbd_is_modifier_key(key)) { 526 continue; 527 } else if (delta & mask) { 528 if (sc->sc_odata.bitmap[key / 64] & mask) { 529 ukbd_put_key(sc, key | KEY_RELEASE); 530 531 /* clear repeating key, if any */ 532 if (sc->sc_repeat_key == key) 533 sc->sc_repeat_key = 0; 534 } else { 535 ukbd_put_key(sc, key | KEY_PRESS); 536 537 sc->sc_co_basetime = sbinuptime(); 538 sc->sc_delay = sc->sc_kbd.kb_delay1; 539 ukbd_start_timer(sc); 540 541 /* set repeat time for last key */ 542 sc->sc_repeat_time = now + sc->sc_kbd.kb_delay1; 543 sc->sc_repeat_key = key; 544 } 545 } 546 } 547 548 /* synchronize old data with new data */ 549 sc->sc_odata = sc->sc_ndata; 550 551 /* check if last key is still pressed */ 552 if (sc->sc_repeat_key != 0) { 553 const int32_t dtime = (sc->sc_repeat_time - now); 554 555 /* check if time has elapsed */ 556 if (dtime <= 0) { 557 ukbd_put_key(sc, sc->sc_repeat_key | KEY_PRESS); 558 sc->sc_repeat_time = now + sc->sc_kbd.kb_delay2; 559 } 560 } 561 562 #ifdef EVDEV_SUPPORT 563 if (evdev_rcpt_mask & EVDEV_RCPT_HW_KBD && sc->sc_evdev != NULL) 564 evdev_sync(sc->sc_evdev); 565 if (sc->sc_evdev != NULL && evdev_is_grabbed(sc->sc_evdev)) 566 return; 567 #endif 568 569 /* wakeup keyboard system */ 570 ukbd_event_keyinput(sc); 571 } 572 573 static void 574 ukbd_event_keyinput(struct ukbd_softc *sc) 575 { 576 int c; 577 578 UKBD_LOCK_ASSERT(); 579 580 if ((sc->sc_flags & UKBD_FLAG_POLLING) != 0) 581 return; 582 583 if (sc->sc_inputs == 0) 584 return; 585 586 if (KBD_IS_ACTIVE(&sc->sc_kbd) && 587 KBD_IS_BUSY(&sc->sc_kbd)) { 588 /* let the callback function process the input */ 589 (sc->sc_kbd.kb_callback.kc_func) (&sc->sc_kbd, KBDIO_KEYINPUT, 590 sc->sc_kbd.kb_callback.kc_arg); 591 } else { 592 /* read and discard the input, no one is waiting for it */ 593 do { 594 c = ukbd_read_char(&sc->sc_kbd, 0); 595 } while (c != NOKEY); 596 } 597 } 598 599 static void 600 ukbd_timeout(void *arg) 601 { 602 struct ukbd_softc *sc = arg; 603 604 UKBD_LOCK_ASSERT(); 605 606 sc->sc_time_ms += sc->sc_delay; 607 sc->sc_delay = 0; 608 609 ukbd_interrupt(sc); 610 611 /* Make sure any leftover key events gets read out */ 612 ukbd_event_keyinput(sc); 613 614 if (ukbd_any_key_pressed(sc) || (sc->sc_inputs != 0)) { 615 ukbd_start_timer(sc); 616 } 617 } 618 619 static uint32_t 620 ukbd_apple_fn(uint32_t keycode) 621 { 622 switch (keycode) { 623 case 0x28: return 0x49; /* RETURN -> INSERT */ 624 case 0x2a: return 0x4c; /* BACKSPACE -> DEL */ 625 case 0x50: return 0x4a; /* LEFT ARROW -> HOME */ 626 case 0x4f: return 0x4d; /* RIGHT ARROW -> END */ 627 case 0x52: return 0x4b; /* UP ARROW -> PGUP */ 628 case 0x51: return 0x4e; /* DOWN ARROW -> PGDN */ 629 default: return keycode; 630 } 631 } 632 633 static uint32_t 634 ukbd_apple_swap(uint32_t keycode) 635 { 636 switch (keycode) { 637 case 0x35: return 0x64; 638 case 0x64: return 0x35; 639 default: return keycode; 640 } 641 } 642 643 static void 644 ukbd_intr_callback(struct usb_xfer *xfer, usb_error_t error) 645 { 646 struct ukbd_softc *sc = usbd_xfer_softc(xfer); 647 struct usb_page_cache *pc; 648 uint32_t i; 649 uint8_t id; 650 uint8_t modifiers; 651 int offset; 652 int len; 653 654 UKBD_LOCK_ASSERT(); 655 656 usbd_xfer_status(xfer, &len, NULL, NULL, NULL); 657 pc = usbd_xfer_get_frame(xfer, 0); 658 659 switch (USB_GET_STATE(xfer)) { 660 case USB_ST_TRANSFERRED: 661 DPRINTF("actlen=%d bytes\n", len); 662 663 if (len == 0) { 664 DPRINTF("zero length data\n"); 665 goto tr_setup; 666 } 667 668 if (sc->sc_kbd_id != 0) { 669 /* check and remove HID ID byte */ 670 usbd_copy_out(pc, 0, &id, 1); 671 offset = 1; 672 len--; 673 if (len == 0) { 674 DPRINTF("zero length data\n"); 675 goto tr_setup; 676 } 677 } else { 678 offset = 0; 679 id = 0; 680 } 681 682 if (len > UKBD_BUFFER_SIZE) 683 len = UKBD_BUFFER_SIZE; 684 685 /* get data */ 686 usbd_copy_out(pc, offset, sc->sc_buffer, len); 687 688 /* clear temporary storage */ 689 memset(&sc->sc_ndata, 0, sizeof(sc->sc_ndata)); 690 691 /* clear modifiers */ 692 modifiers = 0; 693 694 /* scan through HID data */ 695 if ((sc->sc_flags & UKBD_FLAG_APPLE_EJECT) && 696 (id == sc->sc_id_apple_eject)) { 697 if (hid_get_data(sc->sc_buffer, len, &sc->sc_loc_apple_eject)) 698 modifiers |= MOD_EJECT; 699 } 700 if ((sc->sc_flags & UKBD_FLAG_APPLE_FN) && 701 (id == sc->sc_id_apple_fn)) { 702 if (hid_get_data(sc->sc_buffer, len, &sc->sc_loc_apple_fn)) 703 modifiers |= MOD_FN; 704 } 705 706 for (i = 0; i != UKBD_NKEYCODE; i++) { 707 const uint64_t valid = sc->sc_loc_key_valid[i / 64]; 708 const uint64_t mask = 1ULL << (i % 64); 709 710 if (mask == 1 && valid == 0) { 711 i += 63; 712 continue; /* skip empty areas */ 713 } else if (~valid & mask) { 714 continue; /* location is not valid */ 715 } else if (id != sc->sc_id_loc_key[i]) { 716 continue; /* invalid HID ID */ 717 } else if (i == 0) { 718 struct hid_location tmp_loc = sc->sc_loc_key[0]; 719 /* range check array size */ 720 if (tmp_loc.count > UKBD_NKEYCODE) 721 tmp_loc.count = UKBD_NKEYCODE; 722 while (tmp_loc.count--) { 723 uint32_t key = 724 hid_get_udata(sc->sc_buffer, len, &tmp_loc); 725 /* advance to next location */ 726 tmp_loc.pos += tmp_loc.size; 727 if (key == KEY_ERROR) { 728 DPRINTF("KEY_ERROR\n"); 729 sc->sc_ndata = sc->sc_odata; 730 goto tr_setup; /* ignore */ 731 } 732 if (modifiers & MOD_FN) 733 key = ukbd_apple_fn(key); 734 if (sc->sc_flags & UKBD_FLAG_APPLE_SWAP) 735 key = ukbd_apple_swap(key); 736 if (key == KEY_NONE || key >= UKBD_NKEYCODE) 737 continue; 738 /* set key in bitmap */ 739 sc->sc_ndata.bitmap[key / 64] |= 1ULL << (key % 64); 740 } 741 } else if (hid_get_data(sc->sc_buffer, len, &sc->sc_loc_key[i])) { 742 uint32_t key = i; 743 744 if (modifiers & MOD_FN) 745 key = ukbd_apple_fn(key); 746 if (sc->sc_flags & UKBD_FLAG_APPLE_SWAP) 747 key = ukbd_apple_swap(key); 748 if (key == KEY_NONE || key == KEY_ERROR || key >= UKBD_NKEYCODE) 749 continue; 750 /* set key in bitmap */ 751 sc->sc_ndata.bitmap[key / 64] |= 1ULL << (key % 64); 752 } 753 } 754 #ifdef USB_DEBUG 755 DPRINTF("modifiers = 0x%04x\n", modifiers); 756 for (i = 0; i != UKBD_NKEYCODE; i++) { 757 const uint64_t valid = sc->sc_ndata.bitmap[i / 64]; 758 const uint64_t mask = 1ULL << (i % 64); 759 760 if (valid & mask) 761 DPRINTF("Key 0x%02x pressed\n", i); 762 } 763 #endif 764 ukbd_interrupt(sc); 765 766 case USB_ST_SETUP: 767 tr_setup: 768 if (sc->sc_inputs < UKBD_IN_BUF_FULL) { 769 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 770 usbd_transfer_submit(xfer); 771 } else { 772 DPRINTF("input queue is full!\n"); 773 } 774 break; 775 776 default: /* Error */ 777 DPRINTF("error=%s\n", usbd_errstr(error)); 778 779 if (error != USB_ERR_CANCELLED) { 780 /* try to clear stall first */ 781 usbd_xfer_set_stall(xfer); 782 goto tr_setup; 783 } 784 break; 785 } 786 } 787 788 static void 789 ukbd_set_leds_callback(struct usb_xfer *xfer, usb_error_t error) 790 { 791 struct ukbd_softc *sc = usbd_xfer_softc(xfer); 792 struct usb_device_request req; 793 struct usb_page_cache *pc; 794 uint8_t id; 795 uint8_t any; 796 int len; 797 798 UKBD_LOCK_ASSERT(); 799 800 #ifdef USB_DEBUG 801 if (ukbd_no_leds) 802 return; 803 #endif 804 805 switch (USB_GET_STATE(xfer)) { 806 case USB_ST_TRANSFERRED: 807 case USB_ST_SETUP: 808 if (!(sc->sc_flags & UKBD_FLAG_SET_LEDS)) 809 break; 810 sc->sc_flags &= ~UKBD_FLAG_SET_LEDS; 811 812 req.bmRequestType = UT_WRITE_CLASS_INTERFACE; 813 req.bRequest = UR_SET_REPORT; 814 USETW2(req.wValue, UHID_OUTPUT_REPORT, 0); 815 req.wIndex[0] = sc->sc_iface_no; 816 req.wIndex[1] = 0; 817 req.wLength[1] = 0; 818 819 memset(sc->sc_buffer, 0, UKBD_BUFFER_SIZE); 820 821 id = 0; 822 any = 0; 823 824 /* Assumption: All led bits must be in the same ID. */ 825 826 if (sc->sc_flags & UKBD_FLAG_NUMLOCK) { 827 if (sc->sc_leds & NLKED) { 828 hid_put_udata(sc->sc_buffer + 1, UKBD_BUFFER_SIZE - 1, 829 &sc->sc_loc_numlock, 1); 830 } 831 id = sc->sc_id_numlock; 832 any = 1; 833 } 834 835 if (sc->sc_flags & UKBD_FLAG_SCROLLLOCK) { 836 if (sc->sc_leds & SLKED) { 837 hid_put_udata(sc->sc_buffer + 1, UKBD_BUFFER_SIZE - 1, 838 &sc->sc_loc_scrolllock, 1); 839 } 840 id = sc->sc_id_scrolllock; 841 any = 1; 842 } 843 844 if (sc->sc_flags & UKBD_FLAG_CAPSLOCK) { 845 if (sc->sc_leds & CLKED) { 846 hid_put_udata(sc->sc_buffer + 1, UKBD_BUFFER_SIZE - 1, 847 &sc->sc_loc_capslock, 1); 848 } 849 id = sc->sc_id_capslock; 850 any = 1; 851 } 852 853 /* if no leds, nothing to do */ 854 if (!any) 855 break; 856 857 /* range check output report length */ 858 len = sc->sc_led_size; 859 if (len > (UKBD_BUFFER_SIZE - 1)) 860 len = (UKBD_BUFFER_SIZE - 1); 861 862 /* check if we need to prefix an ID byte */ 863 sc->sc_buffer[0] = id; 864 865 pc = usbd_xfer_get_frame(xfer, 1); 866 if (id != 0) { 867 len++; 868 usbd_copy_in(pc, 0, sc->sc_buffer, len); 869 } else { 870 usbd_copy_in(pc, 0, sc->sc_buffer + 1, len); 871 } 872 req.wLength[0] = len; 873 usbd_xfer_set_frame_len(xfer, 1, len); 874 875 DPRINTF("len=%d, id=%d\n", len, id); 876 877 /* setup control request last */ 878 pc = usbd_xfer_get_frame(xfer, 0); 879 usbd_copy_in(pc, 0, &req, sizeof(req)); 880 usbd_xfer_set_frame_len(xfer, 0, sizeof(req)); 881 882 /* start data transfer */ 883 usbd_xfer_set_frames(xfer, 2); 884 usbd_transfer_submit(xfer); 885 break; 886 887 default: /* Error */ 888 DPRINTFN(1, "error=%s\n", usbd_errstr(error)); 889 break; 890 } 891 } 892 893 static const struct usb_config ukbd_config[UKBD_N_TRANSFER] = { 894 [UKBD_INTR_DT_0] = { 895 .type = UE_INTERRUPT, 896 .endpoint = UE_ADDR_ANY, 897 .direction = UE_DIR_IN, 898 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 899 .bufsize = 0, /* use wMaxPacketSize */ 900 .callback = &ukbd_intr_callback, 901 }, 902 903 [UKBD_INTR_DT_1] = { 904 .type = UE_INTERRUPT, 905 .endpoint = UE_ADDR_ANY, 906 .direction = UE_DIR_IN, 907 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 908 .bufsize = 0, /* use wMaxPacketSize */ 909 .callback = &ukbd_intr_callback, 910 }, 911 912 [UKBD_CTRL_LED] = { 913 .type = UE_CONTROL, 914 .endpoint = 0x00, /* Control pipe */ 915 .direction = UE_DIR_ANY, 916 .bufsize = sizeof(struct usb_device_request) + UKBD_BUFFER_SIZE, 917 .callback = &ukbd_set_leds_callback, 918 .timeout = 1000, /* 1 second */ 919 }, 920 }; 921 922 /* A match on these entries will load ukbd */ 923 static const STRUCT_USB_HOST_ID __used ukbd_devs[] = { 924 {USB_IFACE_CLASS(UICLASS_HID), 925 USB_IFACE_SUBCLASS(UISUBCLASS_BOOT), 926 USB_IFACE_PROTOCOL(UIPROTO_BOOT_KEYBOARD),}, 927 }; 928 929 static int 930 ukbd_probe(device_t dev) 931 { 932 keyboard_switch_t *sw = kbd_get_switch(UKBD_DRIVER_NAME); 933 struct usb_attach_arg *uaa = device_get_ivars(dev); 934 void *d_ptr; 935 int error; 936 uint16_t d_len; 937 938 UKBD_LOCK_ASSERT(); 939 DPRINTFN(11, "\n"); 940 941 if (sw == NULL) { 942 return (ENXIO); 943 } 944 if (uaa->usb_mode != USB_MODE_HOST) { 945 return (ENXIO); 946 } 947 948 if (uaa->info.bInterfaceClass != UICLASS_HID) 949 return (ENXIO); 950 951 if (usb_test_quirk(uaa, UQ_KBD_IGNORE)) 952 return (ENXIO); 953 954 if ((uaa->info.bInterfaceSubClass == UISUBCLASS_BOOT) && 955 (uaa->info.bInterfaceProtocol == UIPROTO_BOOT_KEYBOARD)) 956 return (BUS_PROBE_DEFAULT); 957 958 error = usbd_req_get_hid_desc(uaa->device, NULL, 959 &d_ptr, &d_len, M_TEMP, uaa->info.bIfaceIndex); 960 961 if (error) 962 return (ENXIO); 963 964 if (hid_is_keyboard(d_ptr, d_len)) { 965 if (hid_is_mouse(d_ptr, d_len)) { 966 /* 967 * NOTE: We currently don't support USB mouse 968 * and USB keyboard on the same USB endpoint. 969 * Let "ums" driver win. 970 */ 971 error = ENXIO; 972 } else { 973 error = BUS_PROBE_DEFAULT; 974 } 975 } else { 976 error = ENXIO; 977 } 978 free(d_ptr, M_TEMP); 979 return (error); 980 } 981 982 static void 983 ukbd_parse_hid(struct ukbd_softc *sc, const uint8_t *ptr, uint32_t len) 984 { 985 uint32_t flags; 986 uint32_t key; 987 988 /* reset detected bits */ 989 sc->sc_flags &= ~UKBD_FLAG_HID_MASK; 990 991 /* reset detected keys */ 992 memset(sc->sc_loc_key_valid, 0, sizeof(sc->sc_loc_key_valid)); 993 994 /* check if there is an ID byte */ 995 sc->sc_kbd_size = hid_report_size_max(ptr, len, 996 hid_input, &sc->sc_kbd_id); 997 998 /* investigate if this is an Apple Keyboard */ 999 if (hid_locate(ptr, len, 1000 HID_USAGE2(HUP_CONSUMER, HUG_APPLE_EJECT), 1001 hid_input, 0, &sc->sc_loc_apple_eject, &flags, 1002 &sc->sc_id_apple_eject)) { 1003 if (flags & HIO_VARIABLE) 1004 sc->sc_flags |= UKBD_FLAG_APPLE_EJECT | 1005 UKBD_FLAG_APPLE_SWAP; 1006 DPRINTFN(1, "Found Apple eject-key\n"); 1007 } 1008 if (hid_locate(ptr, len, 1009 HID_USAGE2(0xFFFF, 0x0003), 1010 hid_input, 0, &sc->sc_loc_apple_fn, &flags, 1011 &sc->sc_id_apple_fn)) { 1012 if (flags & HIO_VARIABLE) 1013 sc->sc_flags |= UKBD_FLAG_APPLE_FN; 1014 DPRINTFN(1, "Found Apple FN-key\n"); 1015 } 1016 1017 /* figure out event buffer */ 1018 if (hid_locate(ptr, len, 1019 HID_USAGE2(HUP_KEYBOARD, 0x00), 1020 hid_input, 0, &sc->sc_loc_key[0], &flags, 1021 &sc->sc_id_loc_key[0])) { 1022 if (flags & HIO_VARIABLE) { 1023 DPRINTFN(1, "Ignoring keyboard event control\n"); 1024 } else { 1025 sc->sc_loc_key_valid[0] |= 1; 1026 DPRINTFN(1, "Found keyboard event array\n"); 1027 } 1028 } 1029 1030 /* figure out the keys */ 1031 for (key = 1; key != UKBD_NKEYCODE; key++) { 1032 if (hid_locate(ptr, len, 1033 HID_USAGE2(HUP_KEYBOARD, key), 1034 hid_input, 0, &sc->sc_loc_key[key], &flags, 1035 &sc->sc_id_loc_key[key])) { 1036 if (flags & HIO_VARIABLE) { 1037 sc->sc_loc_key_valid[key / 64] |= 1038 1ULL << (key % 64); 1039 DPRINTFN(1, "Found key 0x%02x\n", key); 1040 } 1041 } 1042 } 1043 1044 /* figure out leds on keyboard */ 1045 sc->sc_led_size = hid_report_size_max(ptr, len, 1046 hid_output, NULL); 1047 1048 if (hid_locate(ptr, len, 1049 HID_USAGE2(HUP_LEDS, 0x01), 1050 hid_output, 0, &sc->sc_loc_numlock, &flags, 1051 &sc->sc_id_numlock)) { 1052 if (flags & HIO_VARIABLE) 1053 sc->sc_flags |= UKBD_FLAG_NUMLOCK; 1054 DPRINTFN(1, "Found keyboard numlock\n"); 1055 } 1056 if (hid_locate(ptr, len, 1057 HID_USAGE2(HUP_LEDS, 0x02), 1058 hid_output, 0, &sc->sc_loc_capslock, &flags, 1059 &sc->sc_id_capslock)) { 1060 if (flags & HIO_VARIABLE) 1061 sc->sc_flags |= UKBD_FLAG_CAPSLOCK; 1062 DPRINTFN(1, "Found keyboard capslock\n"); 1063 } 1064 if (hid_locate(ptr, len, 1065 HID_USAGE2(HUP_LEDS, 0x03), 1066 hid_output, 0, &sc->sc_loc_scrolllock, &flags, 1067 &sc->sc_id_scrolllock)) { 1068 if (flags & HIO_VARIABLE) 1069 sc->sc_flags |= UKBD_FLAG_SCROLLLOCK; 1070 DPRINTFN(1, "Found keyboard scrolllock\n"); 1071 } 1072 } 1073 1074 static int 1075 ukbd_attach(device_t dev) 1076 { 1077 struct ukbd_softc *sc = device_get_softc(dev); 1078 struct usb_attach_arg *uaa = device_get_ivars(dev); 1079 int unit = device_get_unit(dev); 1080 keyboard_t *kbd = &sc->sc_kbd; 1081 void *hid_ptr = NULL; 1082 usb_error_t err; 1083 uint16_t n; 1084 uint16_t hid_len; 1085 #ifdef EVDEV_SUPPORT 1086 struct evdev_dev *evdev; 1087 int i; 1088 #endif 1089 #ifdef USB_DEBUG 1090 int rate; 1091 #endif 1092 UKBD_LOCK_ASSERT(); 1093 1094 kbd_init_struct(kbd, UKBD_DRIVER_NAME, KB_OTHER, unit, 0, 0, 0); 1095 1096 kbd->kb_data = (void *)sc; 1097 1098 device_set_usb_desc(dev); 1099 1100 sc->sc_udev = uaa->device; 1101 sc->sc_iface = uaa->iface; 1102 sc->sc_iface_index = uaa->info.bIfaceIndex; 1103 sc->sc_iface_no = uaa->info.bIfaceNum; 1104 sc->sc_mode = K_XLATE; 1105 1106 usb_callout_init_mtx(&sc->sc_callout, &Giant, 0); 1107 1108 #ifdef UKBD_NO_POLLING 1109 err = usbd_transfer_setup(uaa->device, 1110 &uaa->info.bIfaceIndex, sc->sc_xfer, ukbd_config, 1111 UKBD_N_TRANSFER, sc, &Giant); 1112 #else 1113 /* 1114 * Setup the UKBD USB transfers one by one, so they are memory 1115 * independent which allows for handling panics triggered by 1116 * the keyboard driver itself, typically via CTRL+ALT+ESC 1117 * sequences. Or if the USB keyboard driver was processing a 1118 * key at the moment of panic. 1119 */ 1120 for (n = 0; n != UKBD_N_TRANSFER; n++) { 1121 err = usbd_transfer_setup(uaa->device, 1122 &uaa->info.bIfaceIndex, sc->sc_xfer + n, ukbd_config + n, 1123 1, sc, &Giant); 1124 if (err) 1125 break; 1126 } 1127 #endif 1128 1129 if (err) { 1130 DPRINTF("error=%s\n", usbd_errstr(err)); 1131 goto detach; 1132 } 1133 /* setup default keyboard maps */ 1134 1135 sc->sc_keymap = key_map; 1136 sc->sc_accmap = accent_map; 1137 for (n = 0; n < UKBD_NFKEY; n++) { 1138 sc->sc_fkeymap[n] = fkey_tab[n]; 1139 } 1140 1141 kbd_set_maps(kbd, &sc->sc_keymap, &sc->sc_accmap, 1142 sc->sc_fkeymap, UKBD_NFKEY); 1143 1144 KBD_FOUND_DEVICE(kbd); 1145 1146 ukbd_clear_state(kbd); 1147 1148 /* 1149 * FIXME: set the initial value for lock keys in "sc_state" 1150 * according to the BIOS data? 1151 */ 1152 KBD_PROBE_DONE(kbd); 1153 1154 /* get HID descriptor */ 1155 err = usbd_req_get_hid_desc(uaa->device, NULL, &hid_ptr, 1156 &hid_len, M_TEMP, uaa->info.bIfaceIndex); 1157 1158 if (err == 0) { 1159 DPRINTF("Parsing HID descriptor of %d bytes\n", 1160 (int)hid_len); 1161 1162 ukbd_parse_hid(sc, hid_ptr, hid_len); 1163 1164 free(hid_ptr, M_TEMP); 1165 } 1166 1167 /* check if we should use the boot protocol */ 1168 if (usb_test_quirk(uaa, UQ_KBD_BOOTPROTO) || 1169 (err != 0) || ukbd_any_key_valid(sc) == false) { 1170 DPRINTF("Forcing boot protocol\n"); 1171 1172 err = usbd_req_set_protocol(sc->sc_udev, NULL, 1173 sc->sc_iface_index, 0); 1174 1175 if (err != 0) { 1176 DPRINTF("Set protocol error=%s (ignored)\n", 1177 usbd_errstr(err)); 1178 } 1179 1180 ukbd_parse_hid(sc, ukbd_boot_desc, sizeof(ukbd_boot_desc)); 1181 } 1182 1183 /* ignore if SETIDLE fails, hence it is not crucial */ 1184 usbd_req_set_idle(sc->sc_udev, NULL, sc->sc_iface_index, 0, 0); 1185 1186 ukbd_ioctl(kbd, KDSETLED, (caddr_t)&sc->sc_state); 1187 1188 KBD_INIT_DONE(kbd); 1189 1190 if (kbd_register(kbd) < 0) { 1191 goto detach; 1192 } 1193 KBD_CONFIG_DONE(kbd); 1194 1195 ukbd_enable(kbd); 1196 1197 #ifdef KBD_INSTALL_CDEV 1198 if (kbd_attach(kbd)) { 1199 goto detach; 1200 } 1201 #endif 1202 1203 #ifdef EVDEV_SUPPORT 1204 evdev = evdev_alloc(); 1205 evdev_set_name(evdev, device_get_desc(dev)); 1206 evdev_set_phys(evdev, device_get_nameunit(dev)); 1207 evdev_set_id(evdev, BUS_USB, uaa->info.idVendor, 1208 uaa->info.idProduct, 0); 1209 evdev_set_serial(evdev, usb_get_serial(uaa->device)); 1210 evdev_set_methods(evdev, kbd, &ukbd_evdev_methods); 1211 evdev_support_event(evdev, EV_SYN); 1212 evdev_support_event(evdev, EV_KEY); 1213 if (sc->sc_flags & (UKBD_FLAG_NUMLOCK | UKBD_FLAG_CAPSLOCK | 1214 UKBD_FLAG_SCROLLLOCK)) 1215 evdev_support_event(evdev, EV_LED); 1216 evdev_support_event(evdev, EV_REP); 1217 1218 for (i = 0x00; i <= 0xFF; i++) 1219 evdev_support_key(evdev, evdev_hid2key(i)); 1220 if (sc->sc_flags & UKBD_FLAG_NUMLOCK) 1221 evdev_support_led(evdev, LED_NUML); 1222 if (sc->sc_flags & UKBD_FLAG_CAPSLOCK) 1223 evdev_support_led(evdev, LED_CAPSL); 1224 if (sc->sc_flags & UKBD_FLAG_SCROLLLOCK) 1225 evdev_support_led(evdev, LED_SCROLLL); 1226 1227 if (evdev_register_mtx(evdev, &Giant)) 1228 evdev_free(evdev); 1229 else 1230 sc->sc_evdev = evdev; 1231 #endif 1232 1233 sc->sc_flags |= UKBD_FLAG_ATTACHED; 1234 1235 if (bootverbose) { 1236 kbdd_diag(kbd, bootverbose); 1237 } 1238 1239 #ifdef USB_DEBUG 1240 /* check for polling rate override */ 1241 rate = ukbd_pollrate; 1242 if (rate > 0) { 1243 if (rate > 1000) 1244 rate = 1; 1245 else 1246 rate = 1000 / rate; 1247 1248 /* set new polling interval in ms */ 1249 usbd_xfer_set_interval(sc->sc_xfer[UKBD_INTR_DT_0], rate); 1250 usbd_xfer_set_interval(sc->sc_xfer[UKBD_INTR_DT_1], rate); 1251 } 1252 #endif 1253 /* start the keyboard */ 1254 usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_0]); 1255 usbd_transfer_start(sc->sc_xfer[UKBD_INTR_DT_1]); 1256 1257 return (0); /* success */ 1258 1259 detach: 1260 ukbd_detach(dev); 1261 return (ENXIO); /* error */ 1262 } 1263 1264 static int 1265 ukbd_detach(device_t dev) 1266 { 1267 struct ukbd_softc *sc = device_get_softc(dev); 1268 int error; 1269 1270 UKBD_LOCK_ASSERT(); 1271 1272 DPRINTF("\n"); 1273 1274 sc->sc_flags |= UKBD_FLAG_GONE; 1275 1276 usb_callout_stop(&sc->sc_callout); 1277 1278 /* kill any stuck keys */ 1279 if (sc->sc_flags & UKBD_FLAG_ATTACHED) { 1280 /* stop receiving events from the USB keyboard */ 1281 usbd_transfer_stop(sc->sc_xfer[UKBD_INTR_DT_0]); 1282 usbd_transfer_stop(sc->sc_xfer[UKBD_INTR_DT_1]); 1283 1284 /* release all leftover keys, if any */ 1285 memset(&sc->sc_ndata, 0, sizeof(sc->sc_ndata)); 1286 1287 /* process releasing of all keys */ 1288 ukbd_interrupt(sc); 1289 } 1290 1291 ukbd_disable(&sc->sc_kbd); 1292 1293 #ifdef KBD_INSTALL_CDEV 1294 if (sc->sc_flags & UKBD_FLAG_ATTACHED) { 1295 error = kbd_detach(&sc->sc_kbd); 1296 if (error) { 1297 /* usb attach cannot return an error */ 1298 device_printf(dev, "WARNING: kbd_detach() " 1299 "returned non-zero! (ignored)\n"); 1300 } 1301 } 1302 #endif 1303 1304 #ifdef EVDEV_SUPPORT 1305 evdev_free(sc->sc_evdev); 1306 #endif 1307 1308 if (KBD_IS_CONFIGURED(&sc->sc_kbd)) { 1309 error = kbd_unregister(&sc->sc_kbd); 1310 if (error) { 1311 /* usb attach cannot return an error */ 1312 device_printf(dev, "WARNING: kbd_unregister() " 1313 "returned non-zero! (ignored)\n"); 1314 } 1315 } 1316 sc->sc_kbd.kb_flags = 0; 1317 1318 usbd_transfer_unsetup(sc->sc_xfer, UKBD_N_TRANSFER); 1319 1320 usb_callout_drain(&sc->sc_callout); 1321 1322 DPRINTF("%s: disconnected\n", 1323 device_get_nameunit(dev)); 1324 1325 return (0); 1326 } 1327 1328 static int 1329 ukbd_resume(device_t dev) 1330 { 1331 struct ukbd_softc *sc = device_get_softc(dev); 1332 1333 UKBD_LOCK_ASSERT(); 1334 1335 ukbd_clear_state(&sc->sc_kbd); 1336 1337 return (0); 1338 } 1339 1340 #ifdef EVDEV_SUPPORT 1341 static void 1342 ukbd_ev_event(struct evdev_dev *evdev, uint16_t type, uint16_t code, 1343 int32_t value) 1344 { 1345 keyboard_t *kbd = evdev_get_softc(evdev); 1346 1347 if (evdev_rcpt_mask & EVDEV_RCPT_HW_KBD && 1348 (type == EV_LED || type == EV_REP)) { 1349 mtx_lock(&Giant); 1350 kbd_ev_event(kbd, type, code, value); 1351 mtx_unlock(&Giant); 1352 } 1353 } 1354 #endif 1355 1356 /* early keyboard probe, not supported */ 1357 static int 1358 ukbd_configure(int flags) 1359 { 1360 return (0); 1361 } 1362 1363 /* detect a keyboard, not used */ 1364 static int 1365 ukbd__probe(int unit, void *arg, int flags) 1366 { 1367 return (ENXIO); 1368 } 1369 1370 /* reset and initialize the device, not used */ 1371 static int 1372 ukbd_init(int unit, keyboard_t **kbdp, void *arg, int flags) 1373 { 1374 return (ENXIO); 1375 } 1376 1377 /* test the interface to the device, not used */ 1378 static int 1379 ukbd_test_if(keyboard_t *kbd) 1380 { 1381 return (0); 1382 } 1383 1384 /* finish using this keyboard, not used */ 1385 static int 1386 ukbd_term(keyboard_t *kbd) 1387 { 1388 return (ENXIO); 1389 } 1390 1391 /* keyboard interrupt routine, not used */ 1392 static int 1393 ukbd_intr(keyboard_t *kbd, void *arg) 1394 { 1395 return (0); 1396 } 1397 1398 /* lock the access to the keyboard, not used */ 1399 static int 1400 ukbd_lock(keyboard_t *kbd, int lock) 1401 { 1402 return (1); 1403 } 1404 1405 /* 1406 * Enable the access to the device; until this function is called, 1407 * the client cannot read from the keyboard. 1408 */ 1409 static int 1410 ukbd_enable(keyboard_t *kbd) 1411 { 1412 1413 UKBD_LOCK(); 1414 KBD_ACTIVATE(kbd); 1415 UKBD_UNLOCK(); 1416 1417 return (0); 1418 } 1419 1420 /* disallow the access to the device */ 1421 static int 1422 ukbd_disable(keyboard_t *kbd) 1423 { 1424 1425 UKBD_LOCK(); 1426 KBD_DEACTIVATE(kbd); 1427 UKBD_UNLOCK(); 1428 1429 return (0); 1430 } 1431 1432 /* check if data is waiting */ 1433 /* Currently unused. */ 1434 static int 1435 ukbd_check(keyboard_t *kbd) 1436 { 1437 struct ukbd_softc *sc = kbd->kb_data; 1438 1439 UKBD_LOCK_ASSERT(); 1440 1441 if (!KBD_IS_ACTIVE(kbd)) 1442 return (0); 1443 1444 if (sc->sc_flags & UKBD_FLAG_POLLING) 1445 ukbd_do_poll(sc, 0); 1446 1447 #ifdef UKBD_EMULATE_ATSCANCODE 1448 if (sc->sc_buffered_char[0]) { 1449 return (1); 1450 } 1451 #endif 1452 if (sc->sc_inputs > 0) { 1453 return (1); 1454 } 1455 return (0); 1456 } 1457 1458 /* check if char is waiting */ 1459 static int 1460 ukbd_check_char_locked(keyboard_t *kbd) 1461 { 1462 struct ukbd_softc *sc = kbd->kb_data; 1463 1464 UKBD_LOCK_ASSERT(); 1465 1466 if (!KBD_IS_ACTIVE(kbd)) 1467 return (0); 1468 1469 if ((sc->sc_composed_char > 0) && 1470 (!(sc->sc_flags & UKBD_FLAG_COMPOSE))) { 1471 return (1); 1472 } 1473 return (ukbd_check(kbd)); 1474 } 1475 1476 static int 1477 ukbd_check_char(keyboard_t *kbd) 1478 { 1479 int result; 1480 1481 UKBD_LOCK(); 1482 result = ukbd_check_char_locked(kbd); 1483 UKBD_UNLOCK(); 1484 1485 return (result); 1486 } 1487 1488 /* read one byte from the keyboard if it's allowed */ 1489 /* Currently unused. */ 1490 static int 1491 ukbd_read(keyboard_t *kbd, int wait) 1492 { 1493 struct ukbd_softc *sc = kbd->kb_data; 1494 int32_t usbcode; 1495 #ifdef UKBD_EMULATE_ATSCANCODE 1496 uint32_t keycode; 1497 uint32_t scancode; 1498 1499 #endif 1500 1501 UKBD_LOCK_ASSERT(); 1502 1503 if (!KBD_IS_ACTIVE(kbd)) 1504 return (-1); 1505 1506 #ifdef UKBD_EMULATE_ATSCANCODE 1507 if (sc->sc_buffered_char[0]) { 1508 scancode = sc->sc_buffered_char[0]; 1509 if (scancode & SCAN_PREFIX) { 1510 sc->sc_buffered_char[0] &= ~SCAN_PREFIX; 1511 return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1); 1512 } 1513 sc->sc_buffered_char[0] = sc->sc_buffered_char[1]; 1514 sc->sc_buffered_char[1] = 0; 1515 return (scancode); 1516 } 1517 #endif /* UKBD_EMULATE_ATSCANCODE */ 1518 1519 /* XXX */ 1520 usbcode = ukbd_get_key(sc, (wait == FALSE) ? 0 : 1); 1521 if (!KBD_IS_ACTIVE(kbd) || (usbcode == -1)) 1522 return (-1); 1523 1524 ++(kbd->kb_count); 1525 1526 #ifdef UKBD_EMULATE_ATSCANCODE 1527 keycode = ukbd_atkeycode(usbcode, sc->sc_ndata.bitmap); 1528 if (keycode == NN) { 1529 return -1; 1530 } 1531 return (ukbd_key2scan(sc, keycode, sc->sc_ndata.bitmap, 1532 (usbcode & KEY_RELEASE))); 1533 #else /* !UKBD_EMULATE_ATSCANCODE */ 1534 return (usbcode); 1535 #endif /* UKBD_EMULATE_ATSCANCODE */ 1536 } 1537 1538 /* read char from the keyboard */ 1539 static uint32_t 1540 ukbd_read_char_locked(keyboard_t *kbd, int wait) 1541 { 1542 struct ukbd_softc *sc = kbd->kb_data; 1543 uint32_t action; 1544 uint32_t keycode; 1545 int32_t usbcode; 1546 #ifdef UKBD_EMULATE_ATSCANCODE 1547 uint32_t scancode; 1548 #endif 1549 1550 UKBD_LOCK_ASSERT(); 1551 1552 if (!KBD_IS_ACTIVE(kbd)) 1553 return (NOKEY); 1554 1555 next_code: 1556 1557 /* do we have a composed char to return ? */ 1558 1559 if ((sc->sc_composed_char > 0) && 1560 (!(sc->sc_flags & UKBD_FLAG_COMPOSE))) { 1561 action = sc->sc_composed_char; 1562 sc->sc_composed_char = 0; 1563 1564 if (action > 0xFF) { 1565 goto errkey; 1566 } 1567 goto done; 1568 } 1569 #ifdef UKBD_EMULATE_ATSCANCODE 1570 1571 /* do we have a pending raw scan code? */ 1572 1573 if (sc->sc_mode == K_RAW) { 1574 scancode = sc->sc_buffered_char[0]; 1575 if (scancode) { 1576 if (scancode & SCAN_PREFIX) { 1577 sc->sc_buffered_char[0] = (scancode & ~SCAN_PREFIX); 1578 return ((scancode & SCAN_PREFIX_E0) ? 0xe0 : 0xe1); 1579 } 1580 sc->sc_buffered_char[0] = sc->sc_buffered_char[1]; 1581 sc->sc_buffered_char[1] = 0; 1582 return (scancode); 1583 } 1584 } 1585 #endif /* UKBD_EMULATE_ATSCANCODE */ 1586 1587 /* see if there is something in the keyboard port */ 1588 /* XXX */ 1589 usbcode = ukbd_get_key(sc, (wait == FALSE) ? 0 : 1); 1590 if (usbcode == -1) { 1591 return (NOKEY); 1592 } 1593 ++kbd->kb_count; 1594 1595 #ifdef UKBD_EMULATE_ATSCANCODE 1596 /* USB key index -> key code -> AT scan code */ 1597 keycode = ukbd_atkeycode(usbcode, sc->sc_ndata.bitmap); 1598 if (keycode == NN) { 1599 return (NOKEY); 1600 } 1601 /* return an AT scan code for the K_RAW mode */ 1602 if (sc->sc_mode == K_RAW) { 1603 return (ukbd_key2scan(sc, keycode, sc->sc_ndata.bitmap, 1604 (usbcode & KEY_RELEASE))); 1605 } 1606 #else /* !UKBD_EMULATE_ATSCANCODE */ 1607 1608 /* return the byte as is for the K_RAW mode */ 1609 if (sc->sc_mode == K_RAW) { 1610 return (usbcode); 1611 } 1612 /* USB key index -> key code */ 1613 keycode = ukbd_trtab[KEY_INDEX(usbcode)]; 1614 if (keycode == NN) { 1615 return (NOKEY); 1616 } 1617 #endif /* UKBD_EMULATE_ATSCANCODE */ 1618 1619 switch (keycode) { 1620 case 0x38: /* left alt (compose key) */ 1621 if (usbcode & KEY_RELEASE) { 1622 if (sc->sc_flags & UKBD_FLAG_COMPOSE) { 1623 sc->sc_flags &= ~UKBD_FLAG_COMPOSE; 1624 1625 if (sc->sc_composed_char > 0xFF) { 1626 sc->sc_composed_char = 0; 1627 } 1628 } 1629 } else { 1630 if (!(sc->sc_flags & UKBD_FLAG_COMPOSE)) { 1631 sc->sc_flags |= UKBD_FLAG_COMPOSE; 1632 sc->sc_composed_char = 0; 1633 } 1634 } 1635 break; 1636 } 1637 1638 /* return the key code in the K_CODE mode */ 1639 if (usbcode & KEY_RELEASE) { 1640 keycode |= SCAN_RELEASE; 1641 } 1642 if (sc->sc_mode == K_CODE) { 1643 return (keycode); 1644 } 1645 /* compose a character code */ 1646 if (sc->sc_flags & UKBD_FLAG_COMPOSE) { 1647 switch (keycode) { 1648 /* key pressed, process it */ 1649 case 0x47: 1650 case 0x48: 1651 case 0x49: /* keypad 7,8,9 */ 1652 sc->sc_composed_char *= 10; 1653 sc->sc_composed_char += keycode - 0x40; 1654 goto check_composed; 1655 1656 case 0x4B: 1657 case 0x4C: 1658 case 0x4D: /* keypad 4,5,6 */ 1659 sc->sc_composed_char *= 10; 1660 sc->sc_composed_char += keycode - 0x47; 1661 goto check_composed; 1662 1663 case 0x4F: 1664 case 0x50: 1665 case 0x51: /* keypad 1,2,3 */ 1666 sc->sc_composed_char *= 10; 1667 sc->sc_composed_char += keycode - 0x4E; 1668 goto check_composed; 1669 1670 case 0x52: /* keypad 0 */ 1671 sc->sc_composed_char *= 10; 1672 goto check_composed; 1673 1674 /* key released, no interest here */ 1675 case SCAN_RELEASE | 0x47: 1676 case SCAN_RELEASE | 0x48: 1677 case SCAN_RELEASE | 0x49: /* keypad 7,8,9 */ 1678 case SCAN_RELEASE | 0x4B: 1679 case SCAN_RELEASE | 0x4C: 1680 case SCAN_RELEASE | 0x4D: /* keypad 4,5,6 */ 1681 case SCAN_RELEASE | 0x4F: 1682 case SCAN_RELEASE | 0x50: 1683 case SCAN_RELEASE | 0x51: /* keypad 1,2,3 */ 1684 case SCAN_RELEASE | 0x52: /* keypad 0 */ 1685 goto next_code; 1686 1687 case 0x38: /* left alt key */ 1688 break; 1689 1690 default: 1691 if (sc->sc_composed_char > 0) { 1692 sc->sc_flags &= ~UKBD_FLAG_COMPOSE; 1693 sc->sc_composed_char = 0; 1694 goto errkey; 1695 } 1696 break; 1697 } 1698 } 1699 /* keycode to key action */ 1700 action = genkbd_keyaction(kbd, SCAN_CHAR(keycode), 1701 (keycode & SCAN_RELEASE), 1702 &sc->sc_state, &sc->sc_accents); 1703 if (action == NOKEY) { 1704 goto next_code; 1705 } 1706 done: 1707 return (action); 1708 1709 check_composed: 1710 if (sc->sc_composed_char <= 0xFF) { 1711 goto next_code; 1712 } 1713 errkey: 1714 return (ERRKEY); 1715 } 1716 1717 /* Currently wait is always false. */ 1718 static uint32_t 1719 ukbd_read_char(keyboard_t *kbd, int wait) 1720 { 1721 uint32_t keycode; 1722 1723 UKBD_LOCK(); 1724 keycode = ukbd_read_char_locked(kbd, wait); 1725 UKBD_UNLOCK(); 1726 1727 return (keycode); 1728 } 1729 1730 /* some useful control functions */ 1731 static int 1732 ukbd_ioctl_locked(keyboard_t *kbd, u_long cmd, caddr_t arg) 1733 { 1734 struct ukbd_softc *sc = kbd->kb_data; 1735 int i; 1736 #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 1737 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 1738 int ival; 1739 1740 #endif 1741 1742 UKBD_LOCK_ASSERT(); 1743 1744 switch (cmd) { 1745 case KDGKBMODE: /* get keyboard mode */ 1746 *(int *)arg = sc->sc_mode; 1747 break; 1748 #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 1749 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 1750 case _IO('K', 7): 1751 ival = IOCPARM_IVAL(arg); 1752 arg = (caddr_t)&ival; 1753 /* FALLTHROUGH */ 1754 #endif 1755 case KDSKBMODE: /* set keyboard mode */ 1756 switch (*(int *)arg) { 1757 case K_XLATE: 1758 if (sc->sc_mode != K_XLATE) { 1759 /* make lock key state and LED state match */ 1760 sc->sc_state &= ~LOCK_MASK; 1761 sc->sc_state |= KBD_LED_VAL(kbd); 1762 } 1763 /* FALLTHROUGH */ 1764 case K_RAW: 1765 case K_CODE: 1766 if (sc->sc_mode != *(int *)arg) { 1767 if ((sc->sc_flags & UKBD_FLAG_POLLING) == 0) 1768 ukbd_clear_state(kbd); 1769 sc->sc_mode = *(int *)arg; 1770 } 1771 break; 1772 default: 1773 return (EINVAL); 1774 } 1775 break; 1776 1777 case KDGETLED: /* get keyboard LED */ 1778 *(int *)arg = KBD_LED_VAL(kbd); 1779 break; 1780 #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 1781 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 1782 case _IO('K', 66): 1783 ival = IOCPARM_IVAL(arg); 1784 arg = (caddr_t)&ival; 1785 /* FALLTHROUGH */ 1786 #endif 1787 case KDSETLED: /* set keyboard LED */ 1788 /* NOTE: lock key state in "sc_state" won't be changed */ 1789 if (*(int *)arg & ~LOCK_MASK) 1790 return (EINVAL); 1791 1792 i = *(int *)arg; 1793 1794 /* replace CAPS LED with ALTGR LED for ALTGR keyboards */ 1795 if (sc->sc_mode == K_XLATE && 1796 kbd->kb_keymap->n_keys > ALTGR_OFFSET) { 1797 if (i & ALKED) 1798 i |= CLKED; 1799 else 1800 i &= ~CLKED; 1801 } 1802 if (KBD_HAS_DEVICE(kbd)) 1803 ukbd_set_leds(sc, i); 1804 1805 KBD_LED_VAL(kbd) = *(int *)arg; 1806 break; 1807 case KDGKBSTATE: /* get lock key state */ 1808 *(int *)arg = sc->sc_state & LOCK_MASK; 1809 break; 1810 #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 1811 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 1812 case _IO('K', 20): 1813 ival = IOCPARM_IVAL(arg); 1814 arg = (caddr_t)&ival; 1815 /* FALLTHROUGH */ 1816 #endif 1817 case KDSKBSTATE: /* set lock key state */ 1818 if (*(int *)arg & ~LOCK_MASK) { 1819 return (EINVAL); 1820 } 1821 sc->sc_state &= ~LOCK_MASK; 1822 sc->sc_state |= *(int *)arg; 1823 1824 /* set LEDs and quit */ 1825 return (ukbd_ioctl(kbd, KDSETLED, arg)); 1826 1827 case KDSETREPEAT: /* set keyboard repeat rate (new 1828 * interface) */ 1829 if (!KBD_HAS_DEVICE(kbd)) { 1830 return (0); 1831 } 1832 /* 1833 * Convert negative, zero and tiny args to the same limits 1834 * as atkbd. We could support delays of 1 msec, but 1835 * anything much shorter than the shortest atkbd value 1836 * of 250.34 is almost unusable as well as incompatible. 1837 */ 1838 kbd->kb_delay1 = imax(((int *)arg)[0], 250); 1839 kbd->kb_delay2 = imax(((int *)arg)[1], 34); 1840 #ifdef EVDEV_SUPPORT 1841 if (sc->sc_evdev != NULL) 1842 evdev_push_repeats(sc->sc_evdev, kbd); 1843 #endif 1844 return (0); 1845 1846 #if defined(COMPAT_FREEBSD6) || defined(COMPAT_FREEBSD5) || \ 1847 defined(COMPAT_FREEBSD4) || defined(COMPAT_43) 1848 case _IO('K', 67): 1849 ival = IOCPARM_IVAL(arg); 1850 arg = (caddr_t)&ival; 1851 /* FALLTHROUGH */ 1852 #endif 1853 case KDSETRAD: /* set keyboard repeat rate (old 1854 * interface) */ 1855 return (ukbd_set_typematic(kbd, *(int *)arg)); 1856 1857 case PIO_KEYMAP: /* set keyboard translation table */ 1858 case PIO_KEYMAPENT: /* set keyboard translation table 1859 * entry */ 1860 case PIO_DEADKEYMAP: /* set accent key translation table */ 1861 #ifdef COMPAT_FREEBSD13 1862 case OPIO_KEYMAP: /* set keyboard translation table 1863 * (compat) */ 1864 case OPIO_DEADKEYMAP: /* set accent key translation table 1865 * (compat) */ 1866 #endif /* COMPAT_FREEBSD13 */ 1867 sc->sc_accents = 0; 1868 /* FALLTHROUGH */ 1869 default: 1870 return (genkbd_commonioctl(kbd, cmd, arg)); 1871 } 1872 1873 return (0); 1874 } 1875 1876 static int 1877 ukbd_ioctl(keyboard_t *kbd, u_long cmd, caddr_t arg) 1878 { 1879 int result; 1880 1881 /* 1882 * XXX Check if someone is calling us from a critical section: 1883 */ 1884 if (curthread->td_critnest != 0) 1885 return (EDEADLK); 1886 1887 /* 1888 * XXX KDGKBSTATE, KDSKBSTATE and KDSETLED can be called from any 1889 * context where printf(9) can be called, which among other things 1890 * includes interrupt filters and threads with any kinds of locks 1891 * already held. For this reason it would be dangerous to acquire 1892 * the Giant here unconditionally. On the other hand we have to 1893 * have it to handle the ioctl. 1894 * So we make our best effort to auto-detect whether we can grab 1895 * the Giant or not. Blame syscons(4) for this. 1896 */ 1897 switch (cmd) { 1898 case KDGKBSTATE: 1899 case KDSKBSTATE: 1900 case KDSETLED: 1901 if (!mtx_owned(&Giant) && !USB_IN_POLLING_MODE_FUNC()) 1902 return (EDEADLK); /* best I could come up with */ 1903 /* FALLTHROUGH */ 1904 default: 1905 UKBD_LOCK(); 1906 result = ukbd_ioctl_locked(kbd, cmd, arg); 1907 UKBD_UNLOCK(); 1908 return (result); 1909 } 1910 } 1911 1912 /* clear the internal state of the keyboard */ 1913 static void 1914 ukbd_clear_state(keyboard_t *kbd) 1915 { 1916 struct ukbd_softc *sc = kbd->kb_data; 1917 1918 UKBD_LOCK_ASSERT(); 1919 1920 sc->sc_flags &= ~(UKBD_FLAG_COMPOSE | UKBD_FLAG_POLLING); 1921 sc->sc_state &= LOCK_MASK; /* preserve locking key state */ 1922 sc->sc_accents = 0; 1923 sc->sc_composed_char = 0; 1924 #ifdef UKBD_EMULATE_ATSCANCODE 1925 sc->sc_buffered_char[0] = 0; 1926 sc->sc_buffered_char[1] = 0; 1927 #endif 1928 memset(&sc->sc_ndata, 0, sizeof(sc->sc_ndata)); 1929 memset(&sc->sc_odata, 0, sizeof(sc->sc_odata)); 1930 sc->sc_repeat_time = 0; 1931 sc->sc_repeat_key = 0; 1932 } 1933 1934 /* save the internal state, not used */ 1935 static int 1936 ukbd_get_state(keyboard_t *kbd, void *buf, size_t len) 1937 { 1938 return (len == 0) ? 1 : -1; 1939 } 1940 1941 /* set the internal state, not used */ 1942 static int 1943 ukbd_set_state(keyboard_t *kbd, void *buf, size_t len) 1944 { 1945 return (EINVAL); 1946 } 1947 1948 static int 1949 ukbd_poll(keyboard_t *kbd, int on) 1950 { 1951 struct ukbd_softc *sc = kbd->kb_data; 1952 1953 UKBD_LOCK(); 1954 /* 1955 * Keep a reference count on polling to allow recursive 1956 * cngrab() during a panic for example. 1957 */ 1958 if (on) 1959 sc->sc_polling++; 1960 else if (sc->sc_polling > 0) 1961 sc->sc_polling--; 1962 1963 if (sc->sc_polling != 0) { 1964 sc->sc_flags |= UKBD_FLAG_POLLING; 1965 sc->sc_poll_thread = curthread; 1966 } else { 1967 sc->sc_flags &= ~UKBD_FLAG_POLLING; 1968 sc->sc_delay = 0; 1969 } 1970 UKBD_UNLOCK(); 1971 1972 return (0); 1973 } 1974 1975 /* local functions */ 1976 1977 static void 1978 ukbd_set_leds(struct ukbd_softc *sc, uint8_t leds) 1979 { 1980 1981 UKBD_LOCK_ASSERT(); 1982 DPRINTF("leds=0x%02x\n", leds); 1983 1984 #ifdef EVDEV_SUPPORT 1985 if (sc->sc_evdev != NULL) 1986 evdev_push_leds(sc->sc_evdev, leds); 1987 #endif 1988 1989 sc->sc_leds = leds; 1990 sc->sc_flags |= UKBD_FLAG_SET_LEDS; 1991 1992 /* start transfer, if not already started */ 1993 1994 usbd_transfer_start(sc->sc_xfer[UKBD_CTRL_LED]); 1995 } 1996 1997 static int 1998 ukbd_set_typematic(keyboard_t *kbd, int code) 1999 { 2000 #ifdef EVDEV_SUPPORT 2001 struct ukbd_softc *sc = kbd->kb_data; 2002 #endif 2003 if (code & ~0x7f) { 2004 return (EINVAL); 2005 } 2006 kbd->kb_delay1 = kbdelays[(code >> 5) & 3]; 2007 kbd->kb_delay2 = kbrates[code & 0x1f]; 2008 #ifdef EVDEV_SUPPORT 2009 if (sc->sc_evdev != NULL) 2010 evdev_push_repeats(sc->sc_evdev, kbd); 2011 #endif 2012 return (0); 2013 } 2014 2015 #ifdef UKBD_EMULATE_ATSCANCODE 2016 static uint32_t 2017 ukbd_atkeycode(int usbcode, const uint64_t *bitmap) 2018 { 2019 uint32_t keycode; 2020 2021 keycode = ukbd_trtab[KEY_INDEX(usbcode)]; 2022 2023 /* 2024 * Translate Alt-PrintScreen to SysRq. 2025 * 2026 * Some or all AT keyboards connected through USB have already 2027 * mapped Alted PrintScreens to an unusual usbcode (0x8a). 2028 * ukbd_trtab translates this to 0x7e, and key2scan() would 2029 * translate that to 0x79 (Intl' 4). Assume that if we have 2030 * an Alted 0x7e here then it actually is an Alted PrintScreen. 2031 * 2032 * The usual usbcode for all PrintScreens is 0x46. ukbd_trtab 2033 * translates this to 0x5c, so the Alt check to classify 0x5c 2034 * is routine. 2035 */ 2036 if ((keycode == 0x5c || keycode == 0x7e) && 2037 (UKBD_KEY_PRESSED(bitmap, 0xe2 /* ALT-L */) || 2038 UKBD_KEY_PRESSED(bitmap, 0xe6 /* ALT-R */))) 2039 return (0x54); 2040 return (keycode); 2041 } 2042 2043 static int 2044 ukbd_key2scan(struct ukbd_softc *sc, int code, const uint64_t *bitmap, int up) 2045 { 2046 static const int scan[] = { 2047 /* 89 */ 2048 0x11c, /* Enter */ 2049 /* 90-99 */ 2050 0x11d, /* Ctrl-R */ 2051 0x135, /* Divide */ 2052 0x137, /* PrintScreen */ 2053 0x138, /* Alt-R */ 2054 0x147, /* Home */ 2055 0x148, /* Up */ 2056 0x149, /* PageUp */ 2057 0x14b, /* Left */ 2058 0x14d, /* Right */ 2059 0x14f, /* End */ 2060 /* 100-109 */ 2061 0x150, /* Down */ 2062 0x151, /* PageDown */ 2063 0x152, /* Insert */ 2064 0x153, /* Delete */ 2065 0x146, /* Pause/Break */ 2066 0x15b, /* Win_L(Super_L) */ 2067 0x15c, /* Win_R(Super_R) */ 2068 0x15d, /* Application(Menu) */ 2069 2070 /* SUN TYPE 6 USB KEYBOARD */ 2071 0x168, /* Sun Type 6 Help */ 2072 0x15e, /* Sun Type 6 Stop */ 2073 /* 110 - 119 */ 2074 0x15f, /* Sun Type 6 Again */ 2075 0x160, /* Sun Type 6 Props */ 2076 0x161, /* Sun Type 6 Undo */ 2077 0x162, /* Sun Type 6 Front */ 2078 0x163, /* Sun Type 6 Copy */ 2079 0x164, /* Sun Type 6 Open */ 2080 0x165, /* Sun Type 6 Paste */ 2081 0x166, /* Sun Type 6 Find */ 2082 0x167, /* Sun Type 6 Cut */ 2083 0x125, /* Sun Type 6 Mute */ 2084 /* 120 - 130 */ 2085 0x11f, /* Sun Type 6 VolumeDown */ 2086 0x11e, /* Sun Type 6 VolumeUp */ 2087 0x120, /* Sun Type 6 PowerDown */ 2088 2089 /* Japanese 106/109 keyboard */ 2090 0x73, /* Keyboard Intl' 1 (backslash / underscore) */ 2091 0x70, /* Keyboard Intl' 2 (Katakana / Hiragana) */ 2092 0x7d, /* Keyboard Intl' 3 (Yen sign) (Not using in jp106/109) */ 2093 0x79, /* Keyboard Intl' 4 (Henkan) */ 2094 0x7b, /* Keyboard Intl' 5 (Muhenkan) */ 2095 0x5c, /* Keyboard Intl' 6 (Keypad ,) (For PC-9821 layout) */ 2096 0x71, /* Apple Keyboard JIS (Kana) */ 2097 0x72, /* Apple Keyboard JIS (Eisu) */ 2098 }; 2099 2100 if ((code >= 89) && (code < (int)(89 + nitems(scan)))) { 2101 code = scan[code - 89]; 2102 } 2103 /* PrintScreen */ 2104 if (code == 0x137 && (!( 2105 UKBD_KEY_PRESSED(bitmap, 0xe0 /* CTRL-L */) || 2106 UKBD_KEY_PRESSED(bitmap, 0xe4 /* CTRL-R */) || 2107 UKBD_KEY_PRESSED(bitmap, 0xe1 /* SHIFT-L */) || 2108 UKBD_KEY_PRESSED(bitmap, 0xe5 /* SHIFT-R */)))) { 2109 code |= SCAN_PREFIX_SHIFT; 2110 } 2111 /* Pause/Break */ 2112 if ((code == 0x146) && (!( 2113 UKBD_KEY_PRESSED(bitmap, 0xe0 /* CTRL-L */) || 2114 UKBD_KEY_PRESSED(bitmap, 0xe4 /* CTRL-R */)))) { 2115 code = (0x45 | SCAN_PREFIX_E1 | SCAN_PREFIX_CTL); 2116 } 2117 code |= (up ? SCAN_RELEASE : SCAN_PRESS); 2118 2119 if (code & SCAN_PREFIX) { 2120 if (code & SCAN_PREFIX_CTL) { 2121 /* Ctrl */ 2122 sc->sc_buffered_char[0] = (0x1d | (code & SCAN_RELEASE)); 2123 sc->sc_buffered_char[1] = (code & ~SCAN_PREFIX); 2124 } else if (code & SCAN_PREFIX_SHIFT) { 2125 /* Shift */ 2126 sc->sc_buffered_char[0] = (0x2a | (code & SCAN_RELEASE)); 2127 sc->sc_buffered_char[1] = (code & ~SCAN_PREFIX_SHIFT); 2128 } else { 2129 sc->sc_buffered_char[0] = (code & ~SCAN_PREFIX); 2130 sc->sc_buffered_char[1] = 0; 2131 } 2132 return ((code & SCAN_PREFIX_E0) ? 0xe0 : 0xe1); 2133 } 2134 return (code); 2135 2136 } 2137 2138 #endif /* UKBD_EMULATE_ATSCANCODE */ 2139 2140 static keyboard_switch_t ukbdsw = { 2141 .probe = &ukbd__probe, 2142 .init = &ukbd_init, 2143 .term = &ukbd_term, 2144 .intr = &ukbd_intr, 2145 .test_if = &ukbd_test_if, 2146 .enable = &ukbd_enable, 2147 .disable = &ukbd_disable, 2148 .read = &ukbd_read, 2149 .check = &ukbd_check, 2150 .read_char = &ukbd_read_char, 2151 .check_char = &ukbd_check_char, 2152 .ioctl = &ukbd_ioctl, 2153 .lock = &ukbd_lock, 2154 .clear_state = &ukbd_clear_state, 2155 .get_state = &ukbd_get_state, 2156 .set_state = &ukbd_set_state, 2157 .poll = &ukbd_poll, 2158 }; 2159 2160 KEYBOARD_DRIVER(ukbd, ukbdsw, ukbd_configure); 2161 2162 static int 2163 ukbd_driver_load(module_t mod, int what, void *arg) 2164 { 2165 switch (what) { 2166 case MOD_LOAD: 2167 kbd_add_driver(&ukbd_kbd_driver); 2168 break; 2169 case MOD_UNLOAD: 2170 kbd_delete_driver(&ukbd_kbd_driver); 2171 break; 2172 } 2173 return (0); 2174 } 2175 2176 static device_method_t ukbd_methods[] = { 2177 DEVMETHOD(device_probe, ukbd_probe), 2178 DEVMETHOD(device_attach, ukbd_attach), 2179 DEVMETHOD(device_detach, ukbd_detach), 2180 DEVMETHOD(device_resume, ukbd_resume), 2181 2182 DEVMETHOD_END 2183 }; 2184 2185 static driver_t ukbd_driver = { 2186 .name = "ukbd", 2187 .methods = ukbd_methods, 2188 .size = sizeof(struct ukbd_softc), 2189 }; 2190 2191 DRIVER_MODULE(ukbd, uhub, ukbd_driver, ukbd_driver_load, NULL); 2192 MODULE_DEPEND(ukbd, usb, 1, 1, 1); 2193 MODULE_DEPEND(ukbd, hid, 1, 1, 1); 2194 #ifdef EVDEV_SUPPORT 2195 MODULE_DEPEND(ukbd, evdev, 1, 1, 1); 2196 #endif 2197 MODULE_VERSION(ukbd, 1); 2198 USB_PNP_HOST_INFO(ukbd_devs); 2199