xref: /freebsd/sys/dev/usb/controller/xhcireg.h (revision 0fca6ea1d4eea4c934cfff25ac9ee8ad6fe95583)
1 
2 /*-
3  * SPDX-License-Identifier: BSD-2-Clause
4  *
5  * Copyright (c) 2010 Hans Petter Selasky. All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  *
16  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
26  * SUCH DAMAGE.
27  */
28 
29 #ifndef _XHCIREG_H_
30 #define	_XHCIREG_H_
31 
32 /* XHCI PCI config registers */
33 #define	PCI_XHCI_CBMEM		0x10	/* configuration base MEM */
34 #define	PCI_XHCI_USBREV		0x60	/* RO USB protocol revision */
35 #define	PCI_USB_REV_3_0		0x30	/* USB 3.0 */
36 #define	PCI_XHCI_FLADJ		0x61	/* RW frame length adjust */
37 
38 #define	PCI_XHCI_INTEL_XUSB2PR	0xD0	/* Intel USB2 Port Routing */
39 #define	PCI_XHCI_INTEL_USB2PRM	0xD4	/* Intel USB2 Port Routing Mask */
40 #define	PCI_XHCI_INTEL_USB3_PSSEN 0xD8	/* Intel USB3 Port SuperSpeed Enable */
41 #define	PCI_XHCI_INTEL_USB3PRM	0xDC	/* Intel USB3 Port Routing Mask */
42 
43 /* XHCI capability registers */
44 #define	XHCI_CAPLENGTH		0x00	/* RO capability */
45 #define	XHCI_RESERVED		0x01	/* Reserved */
46 #define	XHCI_HCIVERSION		0x02	/* RO Interface version number */
47 #define	XHCI_HCIVERSION_0_9	0x0090	/* xHCI version 0.9 */
48 #define	XHCI_HCIVERSION_1_0	0x0100	/* xHCI version 1.0 */
49 #define	XHCI_HCSPARAMS1		0x04	/* RO structural parameters 1 */
50 #define	XHCI_HCS1_DEVSLOT_MAX(x)((x) & 0xFF)
51 #define	XHCI_HCS1_IRQ_MAX(x)	(((x) >> 8) & 0x3FF)
52 #define	XHCI_HCS1_N_PORTS(x)	(((x) >> 24) & 0xFF)
53 #define	XHCI_HCSPARAMS2		0x08	/* RO structural parameters 2 */
54 #define	XHCI_HCS2_IST(x)	((x) & 0xF)
55 #define	XHCI_HCS2_ERST_MAX(x)	(((x) >> 4) & 0xF)
56 #define	XHCI_HCS2_SPR(x)	(((x) >> 26) & 0x1)
57 #define	XHCI_HCS2_SPB_MAX(x)	((((x) >> 16) & 0x3E0) | (((x) >> 27) & 0x1F))
58 #define	XHCI_HCSPARAMS3		0x0C	/* RO structural parameters 3 */
59 #define	XHCI_HCS3_U1_DEL(x)	((x) & 0xFF)
60 #define	XHCI_HCS3_U2_DEL(x)	(((x) >> 16) & 0xFFFF)
61 #define	XHCI_HCSPARAMS0		0x10	/* RO capability parameters */
62 #define	XHCI_HCS0_AC64(x)	((x) & 0x1)		/* 64-bit capable */
63 #define	XHCI_HCS0_BNC(x)	(((x) >> 1) & 0x1)	/* BW negotiation */
64 #define	XHCI_HCS0_CSZ(x)	(((x) >> 2) & 0x1)	/* context size */
65 #define	XHCI_HCS0_PPC(x)	(((x) >> 3) & 0x1)	/* port power control */
66 #define	XHCI_HCS0_PIND(x)	(((x) >> 4) & 0x1)	/* port indicators */
67 #define	XHCI_HCS0_LHRC(x)	(((x) >> 5) & 0x1)	/* light HC reset */
68 #define	XHCI_HCS0_LTC(x)	(((x) >> 6) & 0x1)	/* latency tolerance msg */
69 #define	XHCI_HCS0_NSS(x)	(((x) >> 7) & 0x1)	/* no secondary sid */
70 #define	XHCI_HCS0_PSA_SZ_MAX(x)	(((x) >> 12) & 0xF)	/* max pri. stream array size */
71 #define	XHCI_HCS0_XECP(x)	(((x) >> 16) & 0xFFFF)	/* extended capabilities pointer */
72 #define	XHCI_DBOFF		0x14	/* RO doorbell offset */
73 #define	XHCI_RTSOFF		0x18	/* RO runtime register space offset */
74 
75 /* XHCI operational registers.  Offset given by XHCI_CAPLENGTH register */
76 #define	XHCI_USBCMD		0x00	/* XHCI command */
77 #define	XHCI_CMD_RS		0x00000001	/* RW Run/Stop */
78 #define	XHCI_CMD_HCRST		0x00000002	/* RW Host Controller Reset */
79 #define	XHCI_CMD_INTE		0x00000004	/* RW Interrupter Enable */
80 #define	XHCI_CMD_HSEE		0x00000008	/* RW Host System Error Enable */
81 #define	XHCI_CMD_LHCRST		0x00000080	/* RO/RW Light Host Controller Reset */
82 #define	XHCI_CMD_CSS		0x00000100	/* RW Controller Save State */
83 #define	XHCI_CMD_CRS		0x00000200	/* RW Controller Restore State */
84 #define	XHCI_CMD_EWE		0x00000400	/* RW Enable Wrap Event */
85 #define	XHCI_CMD_EU3S		0x00000800	/* RW Enable U3 MFINDEX Stop */
86 #define	XHCI_USBSTS		0x04	/* XHCI status */
87 #define	XHCI_STS_HCH		0x00000001	/* RO - Host Controller Halted */
88 #define	XHCI_STS_HSE		0x00000004	/* RW - Host System Error */
89 #define	XHCI_STS_EINT		0x00000008	/* RW - Event Interrupt */
90 #define	XHCI_STS_PCD		0x00000010	/* RW - Port Change Detect */
91 #define	XHCI_STS_SSS		0x00000100	/* RO - Save State Status */
92 #define	XHCI_STS_RSS		0x00000200	/* RO - Restore State Status */
93 #define	XHCI_STS_SRE		0x00000400	/* RW - Save/Restore Error */
94 #define	XHCI_STS_CNR		0x00000800	/* RO - Controller Not Ready */
95 #define	XHCI_STS_HCE		0x00001000	/* RO - Host Controller Error */
96 #define	XHCI_PAGESIZE		0x08	/* XHCI page size mask */
97 #define	XHCI_PAGESIZE_4K	0x00000001	/* 4K Page Size */
98 #define	XHCI_PAGESIZE_8K	0x00000002	/* 8K Page Size */
99 #define	XHCI_PAGESIZE_16K	0x00000004	/* 16K Page Size */
100 #define	XHCI_PAGESIZE_32K	0x00000008	/* 32K Page Size */
101 #define	XHCI_PAGESIZE_64K	0x00000010	/* 64K Page Size */
102 #define	XHCI_DNCTRL		0x14	/* XHCI device notification control */
103 #define	XHCI_DNCTRL_MASK(n)	(1U << (n))
104 #define	XHCI_CRCR_LO		0x18	/* XHCI command ring control */
105 #define	XHCI_CRCR_LO_RCS	0x00000001	/* RW - consumer cycle state */
106 #define	XHCI_CRCR_LO_CS		0x00000002	/* RW - command stop */
107 #define	XHCI_CRCR_LO_CA		0x00000004	/* RW - command abort */
108 #define	XHCI_CRCR_LO_CRR	0x00000008	/* RW - command ring running */
109 #define	XHCI_CRCR_LO_MASK	0x0000000F
110 #define	XHCI_CRCR_HI		0x1C	/* XHCI command ring control */
111 #define	XHCI_DCBAAP_LO		0x30	/* XHCI dev context BA pointer */
112 #define	XHCI_DCBAAP_HI		0x34	/* XHCI dev context BA pointer */
113 #define	XHCI_CONFIG		0x38
114 #define	XHCI_CONFIG_SLOTS_MASK	0x000000FF	/* RW - number of device slots enabled */
115 
116 /* XHCI port status registers */
117 #define	XHCI_PORTSC(n)		(0x3F0 + (0x10 * (n)))	/* XHCI port status */
118 #define	XHCI_PS_CCS		0x00000001	/* RO - current connect status */
119 #define	XHCI_PS_PED		0x00000002	/* RW - port enabled / disabled */
120 #define	XHCI_PS_OCA		0x00000008	/* RO - over current active */
121 #define	XHCI_PS_PR		0x00000010	/* RW - port reset */
122 #define	XHCI_PS_PLS_GET(x)	(((x) >> 5) & 0xF)	/* RW - port link state */
123 #define	XHCI_PS_PLS_SET(x)	(((x) & 0xF) << 5)	/* RW - port link state */
124 #define	XHCI_PS_PP		0x00000200	/* RW - port power */
125 #define	XHCI_PS_SPEED_GET(x)	(((x) >> 10) & 0xF)	/* RO - port speed */
126 #define	XHCI_PS_SPEED_FULL	0x1			/* Full Speed USB */
127 #define	XHCI_PS_SPEED_LOW	0x2			/* Low Speed USB */
128 #define	XHCI_PS_SPEED_HIGH	0x3			/* High Speed USB */
129 #define	XHCI_PS_SPEED_SS	0x4			/* Super Speed USB */
130 #define	XHCI_PS_PIC_GET(x)	(((x) >> 14) & 0x3)	/* RW - port indicator */
131 #define	XHCI_PS_PIC_SET(x)	(((x) & 0x3) << 14)	/* RW - port indicator */
132 #define	XHCI_PS_LWS		0x00010000	/* RW - port link state write strobe */
133 #define	XHCI_PS_CSC		0x00020000	/* RW - connect status change */
134 #define	XHCI_PS_PEC		0x00040000	/* RW - port enable/disable change */
135 #define	XHCI_PS_WRC		0x00080000	/* RW - warm port reset change */
136 #define	XHCI_PS_OCC		0x00100000	/* RW - over-current change */
137 #define	XHCI_PS_PRC		0x00200000	/* RW - port reset change */
138 #define	XHCI_PS_PLC		0x00400000	/* RW - port link state change */
139 #define	XHCI_PS_CEC		0x00800000	/* RW - config error change */
140 #define	XHCI_PS_CAS		0x01000000	/* RO - cold attach status */
141 #define	XHCI_PS_WCE		0x02000000	/* RW - wake on connect enable */
142 #define	XHCI_PS_WDE		0x04000000	/* RW - wake on disconnect enable */
143 #define	XHCI_PS_WOE		0x08000000	/* RW - wake on over-current enable */
144 #define	XHCI_PS_DR		0x40000000	/* RO - device removable */
145 #define	XHCI_PS_WPR		0x80000000U	/* RW - warm port reset */
146 #define	XHCI_PS_CLEAR		0x80FF01FFU	/* command bits */
147 
148 #define	XHCI_PORTPMSC(n)	(0x3F4 + (0x10 * (n)))	/* XHCI status and control */
149 #define	XHCI_PM3_U1TO_GET(x)	(((x) >> 0) & 0xFF)	/* RW - U1 timeout */
150 #define	XHCI_PM3_U1TO_SET(x)	(((x) & 0xFF) << 0)	/* RW - U1 timeout */
151 #define	XHCI_PM3_U2TO_GET(x)	(((x) >> 8) & 0xFF)	/* RW - U2 timeout */
152 #define	XHCI_PM3_U2TO_SET(x)	(((x) & 0xFF) << 8)	/* RW - U2 timeout */
153 #define	XHCI_PM3_FLA		0x00010000	/* RW - Force Link PM Accept */
154 #define	XHCI_PM2_L1S_GET(x)	(((x) >> 0) & 0x7)	/* RO - L1 status */
155 #define	XHCI_PM2_RWE		0x00000008		/* RW - remote wakup enable */
156 #define	XHCI_PM2_HIRD_GET(x)	(((x) >> 4) & 0xF)	/* RW - host initiated resume duration */
157 #define	XHCI_PM2_HIRD_SET(x)	(((x) & 0xF) << 4)	/* RW - host initiated resume duration */
158 #define	XHCI_PM2_L1SLOT_GET(x)	(((x) >> 8) & 0xFF)	/* RW - L1 device slot */
159 #define	XHCI_PM2_L1SLOT_SET(x)	(((x) & 0xFF) << 8)	/* RW - L1 device slot */
160 #define	XHCI_PM2_HLE		0x00010000		/* RW - hardware LPM enable */
161 #define	XHCI_PORTLI(n)		(0x3F8 + (0x10 * (n)))	/* XHCI port link info */
162 #define	XHCI_PLI3_ERR_GET(x)	(((x) >> 0) & 0xFFFF)	/* RO - port link errors */
163 #define	XHCI_PORTRSV(n)		(0x3FC + (0x10 * (n)))	/* XHCI port reserved */
164 
165 /* XHCI runtime registers.  Offset given by XHCI_CAPLENGTH + XHCI_RTSOFF registers */
166 #define	XHCI_MFINDEX		0x0000		/* RO - microframe index */
167 #define	XHCI_MFINDEX_GET(x)	((x) & 0x3FFF)
168 #define	XHCI_IMAN(n)		(0x0020 + (0x20 * (n)))	/* XHCI interrupt management */
169 #define	XHCI_IMAN_INTR_PEND	0x00000001	/* RW - interrupt pending */
170 #define	XHCI_IMAN_INTR_ENA	0x00000002	/* RW - interrupt enable */
171 #define	XHCI_IMOD(n)		(0x0024 + (0x20 * (n)))	/* XHCI interrupt moderation */
172 #define	XHCI_IMOD_IVAL_GET(x)	(((x) >> 0) & 0xFFFF)	/* 250ns unit */
173 #define	XHCI_IMOD_IVAL_SET(x)	(((x) & 0xFFFF) << 0)	/* 250ns unit */
174 #define	XHCI_IMOD_ICNT_GET(x)	(((x) >> 16) & 0xFFFF)	/* 250ns unit */
175 #define	XHCI_IMOD_ICNT_SET(x)	(((x) & 0xFFFF) << 16)	/* 250ns unit */
176 #define	XHCI_IMOD_DEFAULT	0x000001F4U	/* 8000 IRQs/second */
177 #define	XHCI_IMOD_DEFAULT_LP 	0x000003F8U	/* 4000 IRQs/second - LynxPoint */
178 #define	XHCI_ERSTSZ(n)		(0x0028 + (0x20 * (n)))	/* XHCI event ring segment table size */
179 #define	XHCI_ERSTS_GET(x)	((x) & 0xFFFF)
180 #define	XHCI_ERSTS_SET(x)	((x) & 0xFFFF)
181 #define	XHCI_ERSTBA_LO(n)	(0x0030 + (0x20 * (n)))	/* XHCI event ring segment table BA */
182 #define	XHCI_ERSTBA_HI(n)	(0x0034 + (0x20 * (n)))	/* XHCI event ring segment table BA */
183 #define	XHCI_ERDP_LO(n)	(0x0038 + (0x20 * (n)))	/* XHCI event ring dequeue pointer */
184 #define	XHCI_ERDP_LO_SINDEX(x)	((x) & 0x7)	/* RO - dequeue segment index */
185 #define	XHCI_ERDP_LO_BUSY	0x00000008	/* RW - event handler busy */
186 #define	XHCI_ERDP_HI(n)	(0x003C + (0x20 * (n)))	/* XHCI event ring dequeue pointer */
187 
188 /* XHCI doorbell registers. Offset given by XHCI_CAPLENGTH + XHCI_DBOFF registers */
189 #define	XHCI_DOORBELL(n)	(0x0000 + (4 * (n)))
190 #define	XHCI_DB_TARGET_GET(x)	((x) & 0xFF)		/* RW - doorbell target */
191 #define	XHCI_DB_TARGET_SET(x)	((x) & 0xFF)		/* RW - doorbell target */
192 #define	XHCI_DB_SID_GET(x)	(((x) >> 16) & 0xFFFF)	/* RW - doorbell stream ID */
193 #define	XHCI_DB_SID_SET(x)	(((x) & 0xFFFF) << 16)	/* RW - doorbell stream ID */
194 
195 /* XHCI legacy support */
196 #define	XHCI_XECP_ID(x)		((x) & 0xFF)
197 #define	XHCI_XECP_NEXT(x)	(((x) >> 8) & 0xFF)
198 #define	XHCI_XECP_BIOS_SEM	0x0002
199 #define	XHCI_XECP_OS_SEM	0x0003
200 
201 /* XHCI capability ID's */
202 #define	XHCI_ID_USB_LEGACY	0x0001
203 #define	XHCI_ID_PROTOCOLS	0x0002
204 #define	XHCI_ID_POWER_MGMT	0x0003
205 #define	XHCI_ID_VIRTUALIZATION	0x0004
206 #define	XHCI_ID_MSG_IRQ		0x0005
207 #define	XHCI_ID_USB_LOCAL_MEM	0x0006
208 
209 /* XHCI register R/W wrappers */
210 #define	XREAD1(sc, what, a) \
211 	bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
212 		(a) + (sc)->sc_##what##_off)
213 #define	XREAD2(sc, what, a) \
214 	bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
215 		(a) + (sc)->sc_##what##_off)
216 #define	XREAD4(sc, what, a) \
217 	bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
218 		(a) + (sc)->sc_##what##_off)
219 #define	XWRITE1(sc, what, a, x) \
220 	bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, \
221 		(a) + (sc)->sc_##what##_off, (x))
222 #define	XWRITE2(sc, what, a, x) \
223 	bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, \
224 		(a) + (sc)->sc_##what##_off, (x))
225 #define	XWRITE4(sc, what, a, x) \
226 	bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, \
227 		(a) + (sc)->sc_##what##_off, (x))
228 
229 #endif	/* _XHCIREG_H_ */
230