1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2010-2022 Hans Petter Selasky 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 16 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 17 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 18 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 19 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 20 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 21 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 23 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 24 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 25 * SUCH DAMAGE. 26 */ 27 28 /* 29 * USB eXtensible Host Controller Interface, a.k.a. USB 3.0 controller. 30 * 31 * The XHCI 1.0 spec can be found at 32 * http://www.intel.com/technology/usb/download/xHCI_Specification_for_USB.pdf 33 * and the USB 3.0 spec at 34 * http://www.usb.org/developers/docs/usb_30_spec_060910.zip 35 */ 36 37 /* 38 * A few words about the design implementation: This driver emulates 39 * the concept about TDs which is found in EHCI specification. This 40 * way we achieve that the USB controller drivers look similar to 41 * eachother which makes it easier to understand the code. 42 */ 43 44 #ifdef USB_GLOBAL_INCLUDE_FILE 45 #include USB_GLOBAL_INCLUDE_FILE 46 #else 47 #include <sys/stdint.h> 48 #include <sys/stddef.h> 49 #include <sys/param.h> 50 #include <sys/queue.h> 51 #include <sys/types.h> 52 #include <sys/systm.h> 53 #include <sys/kernel.h> 54 #include <sys/bus.h> 55 #include <sys/module.h> 56 #include <sys/lock.h> 57 #include <sys/mutex.h> 58 #include <sys/condvar.h> 59 #include <sys/sysctl.h> 60 #include <sys/sx.h> 61 #include <sys/unistd.h> 62 #include <sys/callout.h> 63 #include <sys/malloc.h> 64 #include <sys/priv.h> 65 66 #include <dev/usb/usb.h> 67 #include <dev/usb/usbdi.h> 68 69 #define USB_DEBUG_VAR xhcidebug 70 71 #include <dev/usb/usb_core.h> 72 #include <dev/usb/usb_debug.h> 73 #include <dev/usb/usb_busdma.h> 74 #include <dev/usb/usb_process.h> 75 #include <dev/usb/usb_transfer.h> 76 #include <dev/usb/usb_device.h> 77 #include <dev/usb/usb_hub.h> 78 #include <dev/usb/usb_util.h> 79 80 #include <dev/usb/usb_controller.h> 81 #include <dev/usb/usb_bus.h> 82 #endif /* USB_GLOBAL_INCLUDE_FILE */ 83 84 #include <dev/usb/controller/xhci.h> 85 #include <dev/usb/controller/xhcireg.h> 86 87 #define XHCI_BUS2SC(bus) \ 88 __containerof(bus, struct xhci_softc, sc_bus) 89 90 #define XHCI_GET_CTX(sc, which, field, ptr) \ 91 ((sc)->sc_ctx_is_64_byte ? \ 92 &((struct which##64 *)(ptr))->field.ctx : \ 93 &((struct which *)(ptr))->field) 94 95 static SYSCTL_NODE(_hw_usb, OID_AUTO, xhci, CTLFLAG_RW | CTLFLAG_MPSAFE, 0, 96 "USB XHCI"); 97 98 static int xhcistreams; 99 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, streams, CTLFLAG_RWTUN, 100 &xhcistreams, 0, "Set to enable streams mode support"); 101 102 static int xhcictlquirk = 1; 103 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, ctlquirk, CTLFLAG_RWTUN, 104 &xhcictlquirk, 0, "Set to enable control endpoint quirk"); 105 106 static int xhcidcepquirk; 107 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, dcepquirk, CTLFLAG_RWTUN, 108 &xhcidcepquirk, 0, "Set to disable endpoint deconfigure command"); 109 110 #ifdef USB_DEBUG 111 static int xhcidebug; 112 static int xhciroute; 113 static int xhcipolling; 114 static int xhcidma32; 115 static int xhcictlstep; 116 117 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, debug, CTLFLAG_RWTUN, 118 &xhcidebug, 0, "Debug level"); 119 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, xhci_port_route, CTLFLAG_RWTUN, 120 &xhciroute, 0, "Routing bitmap for switching EHCI ports to the XHCI controller"); 121 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, use_polling, CTLFLAG_RWTUN, 122 &xhcipolling, 0, "Set to enable software interrupt polling for the XHCI controller"); 123 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, dma32, CTLFLAG_RWTUN, 124 &xhcidma32, 0, "Set to only use 32-bit DMA for the XHCI controller"); 125 SYSCTL_INT(_hw_usb_xhci, OID_AUTO, ctlstep, CTLFLAG_RWTUN, 126 &xhcictlstep, 0, "Set to enable control endpoint status stage stepping"); 127 #else 128 #define xhciroute 0 129 #define xhcidma32 0 130 #define xhcictlstep 0 131 #endif 132 133 #define XHCI_INTR_ENDPT 1 134 135 struct xhci_std_temp { 136 struct xhci_softc *sc; 137 struct usb_page_cache *pc; 138 struct xhci_td *td; 139 struct xhci_td *td_next; 140 uint32_t len; 141 uint32_t offset; 142 uint32_t max_packet_size; 143 uint32_t average; 144 uint32_t isoc_frame; 145 uint16_t isoc_delta; 146 uint8_t shortpkt; 147 uint8_t multishort; 148 uint8_t last_frame; 149 uint8_t trb_type; 150 uint8_t direction; 151 uint8_t tbc; 152 uint8_t tlbpc; 153 uint8_t step_td; 154 uint8_t do_isoc_sync; 155 }; 156 157 static void xhci_do_poll(struct usb_bus *); 158 static void xhci_device_done(struct usb_xfer *, usb_error_t); 159 static void xhci_root_intr(struct xhci_softc *); 160 static void xhci_free_device_ext(struct usb_device *); 161 static struct xhci_endpoint_ext *xhci_get_endpoint_ext(struct usb_device *, 162 struct usb_endpoint_descriptor *); 163 static usb_proc_callback_t xhci_configure_msg; 164 static usb_error_t xhci_configure_device(struct usb_device *); 165 static usb_error_t xhci_configure_endpoint(struct usb_device *, 166 struct usb_endpoint_descriptor *, struct xhci_endpoint_ext *, 167 uint16_t, uint8_t, uint8_t, uint8_t, uint16_t, uint16_t, 168 uint8_t); 169 static usb_error_t xhci_configure_mask(struct usb_device *, 170 uint32_t, uint8_t); 171 static usb_error_t xhci_cmd_evaluate_ctx(struct xhci_softc *, 172 uint64_t, uint8_t); 173 static void xhci_endpoint_doorbell(struct usb_xfer *); 174 175 static const struct usb_bus_methods xhci_bus_methods; 176 177 #ifdef USB_DEBUG 178 static void 179 xhci_dump_trb(struct xhci_trb *trb) 180 { 181 DPRINTFN(5, "trb = %p\n", trb); 182 DPRINTFN(5, "qwTrb0 = 0x%016llx\n", (long long)le64toh(trb->qwTrb0)); 183 DPRINTFN(5, "dwTrb2 = 0x%08x\n", le32toh(trb->dwTrb2)); 184 DPRINTFN(5, "dwTrb3 = 0x%08x\n", le32toh(trb->dwTrb3)); 185 } 186 187 static void 188 xhci_dump_endpoint(struct xhci_endp_ctx *pep) 189 { 190 DPRINTFN(5, "pep = %p\n", pep); 191 DPRINTFN(5, "dwEpCtx0=0x%08x\n", le32toh(pep->dwEpCtx0)); 192 DPRINTFN(5, "dwEpCtx1=0x%08x\n", le32toh(pep->dwEpCtx1)); 193 DPRINTFN(5, "qwEpCtx2=0x%016llx\n", (long long)le64toh(pep->qwEpCtx2)); 194 DPRINTFN(5, "dwEpCtx4=0x%08x\n", le32toh(pep->dwEpCtx4)); 195 DPRINTFN(5, "dwEpCtx5=0x%08x\n", le32toh(pep->dwEpCtx5)); 196 DPRINTFN(5, "dwEpCtx6=0x%08x\n", le32toh(pep->dwEpCtx6)); 197 DPRINTFN(5, "dwEpCtx7=0x%08x\n", le32toh(pep->dwEpCtx7)); 198 } 199 200 static void 201 xhci_dump_device(struct xhci_slot_ctx *psl) 202 { 203 DPRINTFN(5, "psl = %p\n", psl); 204 DPRINTFN(5, "dwSctx0=0x%08x\n", le32toh(psl->dwSctx0)); 205 DPRINTFN(5, "dwSctx1=0x%08x\n", le32toh(psl->dwSctx1)); 206 DPRINTFN(5, "dwSctx2=0x%08x\n", le32toh(psl->dwSctx2)); 207 DPRINTFN(5, "dwSctx3=0x%08x\n", le32toh(psl->dwSctx3)); 208 } 209 #endif 210 211 uint8_t 212 xhci_use_polling(void) 213 { 214 #ifdef USB_DEBUG 215 return (xhcipolling != 0); 216 #else 217 return (0); 218 #endif 219 } 220 221 static void 222 xhci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb) 223 { 224 struct xhci_softc *sc = XHCI_BUS2SC(bus); 225 uint16_t i; 226 227 cb(bus, &sc->sc_hw.root_pc, &sc->sc_hw.root_pg, 228 sizeof(struct xhci_hw_root), XHCI_PAGE_SIZE); 229 230 cb(bus, &sc->sc_hw.ctx_pc, &sc->sc_hw.ctx_pg, 231 sizeof(struct xhci_dev_ctx_addr), XHCI_PAGE_SIZE); 232 233 for (i = 0; i != sc->sc_noscratch; i++) { 234 cb(bus, &sc->sc_hw.scratch_pc[i], &sc->sc_hw.scratch_pg[i], 235 XHCI_PAGE_SIZE, XHCI_PAGE_SIZE); 236 } 237 } 238 239 static int 240 xhci_reset_command_queue_locked(struct xhci_softc *sc) 241 { 242 struct usb_page_search buf_res; 243 struct xhci_hw_root *phwr; 244 uint64_t addr; 245 uint32_t temp; 246 247 DPRINTF("\n"); 248 249 temp = XREAD4(sc, oper, XHCI_CRCR_LO); 250 if (temp & XHCI_CRCR_LO_CRR) { 251 DPRINTF("Command ring running\n"); 252 temp &= ~(XHCI_CRCR_LO_CS | XHCI_CRCR_LO_CA); 253 254 /* 255 * Try to abort the last command as per section 256 * 4.6.1.2 "Aborting a Command" of the XHCI 257 * specification: 258 */ 259 260 /* stop and cancel */ 261 XWRITE4(sc, oper, XHCI_CRCR_LO, temp | XHCI_CRCR_LO_CS); 262 XWRITE4(sc, oper, XHCI_CRCR_HI, 0); 263 264 XWRITE4(sc, oper, XHCI_CRCR_LO, temp | XHCI_CRCR_LO_CA); 265 XWRITE4(sc, oper, XHCI_CRCR_HI, 0); 266 267 /* wait 250ms */ 268 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 4); 269 270 /* check if command ring is still running */ 271 temp = XREAD4(sc, oper, XHCI_CRCR_LO); 272 if (temp & XHCI_CRCR_LO_CRR) { 273 DPRINTF("Comand ring still running\n"); 274 return (USB_ERR_IOERROR); 275 } 276 } 277 278 /* reset command ring */ 279 sc->sc_command_ccs = 1; 280 sc->sc_command_idx = 0; 281 282 usbd_get_page(&sc->sc_hw.root_pc, 0, &buf_res); 283 284 /* set up command ring control base address */ 285 addr = buf_res.physaddr; 286 phwr = buf_res.buffer; 287 addr += __offsetof(struct xhci_hw_root, hwr_commands[0]); 288 289 DPRINTF("CRCR=0x%016llx\n", (unsigned long long)addr); 290 291 memset(phwr->hwr_commands, 0, sizeof(phwr->hwr_commands)); 292 phwr->hwr_commands[XHCI_MAX_COMMANDS - 1].qwTrb0 = htole64(addr); 293 294 usb_pc_cpu_flush(&sc->sc_hw.root_pc); 295 296 XWRITE4(sc, oper, XHCI_CRCR_LO, ((uint32_t)addr) | XHCI_CRCR_LO_RCS); 297 XWRITE4(sc, oper, XHCI_CRCR_HI, (uint32_t)(addr >> 32)); 298 299 return (0); 300 } 301 302 usb_error_t 303 xhci_start_controller(struct xhci_softc *sc) 304 { 305 struct usb_page_search buf_res; 306 struct xhci_hw_root *phwr; 307 struct xhci_dev_ctx_addr *pdctxa; 308 usb_error_t err; 309 uint64_t addr; 310 uint32_t temp; 311 uint16_t i; 312 313 DPRINTF("\n"); 314 315 sc->sc_event_ccs = 1; 316 sc->sc_event_idx = 0; 317 sc->sc_command_ccs = 1; 318 sc->sc_command_idx = 0; 319 320 err = xhci_reset_controller(sc); 321 if (err) 322 return (err); 323 324 /* set up number of device slots */ 325 DPRINTF("CONFIG=0x%08x -> 0x%08x\n", 326 XREAD4(sc, oper, XHCI_CONFIG), sc->sc_noslot); 327 328 XWRITE4(sc, oper, XHCI_CONFIG, sc->sc_noslot); 329 330 temp = XREAD4(sc, oper, XHCI_USBSTS); 331 332 /* clear interrupts */ 333 XWRITE4(sc, oper, XHCI_USBSTS, temp); 334 /* disable all device notifications */ 335 XWRITE4(sc, oper, XHCI_DNCTRL, 0); 336 337 /* set up device context base address */ 338 usbd_get_page(&sc->sc_hw.ctx_pc, 0, &buf_res); 339 pdctxa = buf_res.buffer; 340 memset(pdctxa, 0, sizeof(*pdctxa)); 341 342 addr = buf_res.physaddr; 343 addr += __offsetof(struct xhci_dev_ctx_addr, qwSpBufPtr[0]); 344 345 /* slot 0 points to the table of scratchpad pointers */ 346 pdctxa->qwBaaDevCtxAddr[0] = htole64(addr); 347 348 for (i = 0; i != sc->sc_noscratch; i++) { 349 struct usb_page_search buf_scp; 350 usbd_get_page(&sc->sc_hw.scratch_pc[i], 0, &buf_scp); 351 pdctxa->qwSpBufPtr[i] = htole64((uint64_t)buf_scp.physaddr); 352 } 353 354 addr = buf_res.physaddr; 355 356 XWRITE4(sc, oper, XHCI_DCBAAP_LO, (uint32_t)addr); 357 XWRITE4(sc, oper, XHCI_DCBAAP_HI, (uint32_t)(addr >> 32)); 358 XWRITE4(sc, oper, XHCI_DCBAAP_LO, (uint32_t)addr); 359 XWRITE4(sc, oper, XHCI_DCBAAP_HI, (uint32_t)(addr >> 32)); 360 361 /* set up event table size */ 362 DPRINTF("ERSTSZ=0x%08x -> 0x%08x\n", 363 XREAD4(sc, runt, XHCI_ERSTSZ(0)), sc->sc_erst_max); 364 365 XWRITE4(sc, runt, XHCI_ERSTSZ(0), XHCI_ERSTS_SET(sc->sc_erst_max)); 366 367 /* set up interrupt rate */ 368 XWRITE4(sc, runt, XHCI_IMOD(0), sc->sc_imod_default); 369 370 usbd_get_page(&sc->sc_hw.root_pc, 0, &buf_res); 371 372 phwr = buf_res.buffer; 373 addr = buf_res.physaddr; 374 addr += __offsetof(struct xhci_hw_root, hwr_events[0]); 375 376 /* reset hardware root structure */ 377 memset(phwr, 0, sizeof(*phwr)); 378 379 phwr->hwr_ring_seg[0].qwEvrsTablePtr = htole64(addr); 380 phwr->hwr_ring_seg[0].dwEvrsTableSize = htole32(XHCI_MAX_EVENTS); 381 382 /* 383 * PR 237666: 384 * 385 * According to the XHCI specification, the XWRITE4's to 386 * XHCI_ERSTBA_LO and _HI lead to the XHCI to copy the 387 * qwEvrsTablePtr and dwEvrsTableSize values above at that 388 * time, as the XHCI initializes its event ring support. This 389 * is before the event ring starts to pay attention to the 390 * RUN/STOP bit. Thus, make sure the values are observable to 391 * the XHCI before that point. 392 */ 393 usb_bus_mem_flush_all(&sc->sc_bus, &xhci_iterate_hw_softc); 394 395 DPRINTF("ERDP(0)=0x%016llx\n", (unsigned long long)addr); 396 397 XWRITE4(sc, runt, XHCI_ERDP_LO(0), (uint32_t)addr); 398 XWRITE4(sc, runt, XHCI_ERDP_HI(0), (uint32_t)(addr >> 32)); 399 400 addr = buf_res.physaddr; 401 402 DPRINTF("ERSTBA(0)=0x%016llx\n", (unsigned long long)addr); 403 404 XWRITE4(sc, runt, XHCI_ERSTBA_LO(0), (uint32_t)addr); 405 XWRITE4(sc, runt, XHCI_ERSTBA_HI(0), (uint32_t)(addr >> 32)); 406 407 /* set up interrupter registers */ 408 temp = XREAD4(sc, runt, XHCI_IMAN(0)); 409 temp |= XHCI_IMAN_INTR_ENA; 410 XWRITE4(sc, runt, XHCI_IMAN(0), temp); 411 412 /* set up command ring control base address */ 413 addr = buf_res.physaddr; 414 addr += __offsetof(struct xhci_hw_root, hwr_commands[0]); 415 416 DPRINTF("CRCR=0x%016llx\n", (unsigned long long)addr); 417 418 XWRITE4(sc, oper, XHCI_CRCR_LO, ((uint32_t)addr) | XHCI_CRCR_LO_RCS); 419 XWRITE4(sc, oper, XHCI_CRCR_HI, (uint32_t)(addr >> 32)); 420 421 phwr->hwr_commands[XHCI_MAX_COMMANDS - 1].qwTrb0 = htole64(addr); 422 423 usb_bus_mem_flush_all(&sc->sc_bus, &xhci_iterate_hw_softc); 424 425 /* Go! */ 426 XWRITE4(sc, oper, XHCI_USBCMD, XHCI_CMD_RS | 427 XHCI_CMD_INTE | XHCI_CMD_HSEE); 428 429 for (i = 0; i != 100; i++) { 430 usb_pause_mtx(NULL, hz / 100); 431 temp = XREAD4(sc, oper, XHCI_USBSTS) & XHCI_STS_HCH; 432 if (!temp) 433 break; 434 } 435 if (temp) { 436 XWRITE4(sc, oper, XHCI_USBCMD, 0); 437 device_printf(sc->sc_bus.parent, "Run timeout.\n"); 438 return (USB_ERR_IOERROR); 439 } 440 441 /* catch any lost interrupts */ 442 xhci_do_poll(&sc->sc_bus); 443 444 if (sc->sc_port_route != NULL) { 445 /* Route all ports to the XHCI by default */ 446 sc->sc_port_route(sc->sc_bus.parent, 447 ~xhciroute, xhciroute); 448 } 449 return (0); 450 } 451 452 usb_error_t 453 xhci_halt_controller(struct xhci_softc *sc) 454 { 455 uint32_t temp; 456 uint16_t i; 457 458 DPRINTF("\n"); 459 460 sc->sc_capa_off = 0; 461 sc->sc_oper_off = XREAD1(sc, capa, XHCI_CAPLENGTH); 462 sc->sc_runt_off = XREAD4(sc, capa, XHCI_RTSOFF) & ~0xF; 463 sc->sc_door_off = XREAD4(sc, capa, XHCI_DBOFF) & ~0x3; 464 465 /* Halt controller */ 466 XWRITE4(sc, oper, XHCI_USBCMD, 0); 467 468 for (i = 0; i != 100; i++) { 469 usb_pause_mtx(NULL, hz / 100); 470 temp = XREAD4(sc, oper, XHCI_USBSTS) & XHCI_STS_HCH; 471 if (temp) 472 break; 473 } 474 475 if (!temp) { 476 device_printf(sc->sc_bus.parent, "Controller halt timeout.\n"); 477 return (USB_ERR_IOERROR); 478 } 479 return (0); 480 } 481 482 usb_error_t 483 xhci_reset_controller(struct xhci_softc *sc) 484 { 485 uint32_t temp = 0; 486 uint16_t i; 487 488 DPRINTF("\n"); 489 490 /* Reset controller */ 491 XWRITE4(sc, oper, XHCI_USBCMD, XHCI_CMD_HCRST); 492 493 for (i = 0; i != 100; i++) { 494 usb_pause_mtx(NULL, hz / 100); 495 temp = (XREAD4(sc, oper, XHCI_USBCMD) & XHCI_CMD_HCRST) | 496 (XREAD4(sc, oper, XHCI_USBSTS) & XHCI_STS_CNR); 497 if (!temp) 498 break; 499 } 500 501 if (temp) { 502 device_printf(sc->sc_bus.parent, "Controller " 503 "reset timeout.\n"); 504 return (USB_ERR_IOERROR); 505 } 506 return (0); 507 } 508 509 usb_error_t 510 xhci_init(struct xhci_softc *sc, device_t self, uint8_t dma32) 511 { 512 uint32_t temp; 513 514 DPRINTF("\n"); 515 516 /* initialize some bus fields */ 517 sc->sc_bus.parent = self; 518 519 /* set the bus revision */ 520 sc->sc_bus.usbrev = USB_REV_3_0; 521 522 /* set up the bus struct */ 523 sc->sc_bus.methods = &xhci_bus_methods; 524 525 /* set up devices array */ 526 sc->sc_bus.devices = sc->sc_devices; 527 sc->sc_bus.devices_max = XHCI_MAX_DEVICES; 528 529 /* set default cycle state in case of early interrupts */ 530 sc->sc_event_ccs = 1; 531 sc->sc_command_ccs = 1; 532 533 /* set up bus space offsets */ 534 sc->sc_capa_off = 0; 535 sc->sc_oper_off = XREAD1(sc, capa, XHCI_CAPLENGTH); 536 sc->sc_runt_off = XREAD4(sc, capa, XHCI_RTSOFF) & ~0x1F; 537 sc->sc_door_off = XREAD4(sc, capa, XHCI_DBOFF) & ~0x3; 538 539 DPRINTF("CAPLENGTH=0x%x\n", sc->sc_oper_off); 540 DPRINTF("RUNTIMEOFFSET=0x%x\n", sc->sc_runt_off); 541 DPRINTF("DOOROFFSET=0x%x\n", sc->sc_door_off); 542 543 DPRINTF("xHCI version = 0x%04x\n", XREAD2(sc, capa, XHCI_HCIVERSION)); 544 545 if (!(XREAD4(sc, oper, XHCI_PAGESIZE) & XHCI_PAGESIZE_4K)) { 546 device_printf(sc->sc_bus.parent, "Controller does " 547 "not support 4K page size.\n"); 548 return (ENXIO); 549 } 550 551 temp = XREAD4(sc, capa, XHCI_HCSPARAMS0); 552 553 DPRINTF("HCS0 = 0x%08x\n", temp); 554 555 /* set up context size */ 556 if (XHCI_HCS0_CSZ(temp)) { 557 sc->sc_ctx_is_64_byte = 1; 558 } else { 559 sc->sc_ctx_is_64_byte = 0; 560 } 561 562 /* get DMA bits */ 563 sc->sc_bus.dma_bits = (XHCI_HCS0_AC64(temp) && 564 xhcidma32 == 0 && dma32 == 0) ? 64 : 32; 565 566 device_printf(self, "%d bytes context size, %d-bit DMA\n", 567 sc->sc_ctx_is_64_byte ? 64 : 32, (int)sc->sc_bus.dma_bits); 568 569 /* enable 64Kbyte control endpoint quirk */ 570 sc->sc_bus.control_ep_quirk = (xhcictlquirk ? 1 : 0); 571 572 temp = XREAD4(sc, capa, XHCI_HCSPARAMS1); 573 574 /* get number of device slots */ 575 sc->sc_noport = XHCI_HCS1_N_PORTS(temp); 576 577 if (sc->sc_noport == 0) { 578 device_printf(sc->sc_bus.parent, "Invalid number " 579 "of ports: %u\n", sc->sc_noport); 580 return (ENXIO); 581 } 582 583 sc->sc_noslot = XHCI_HCS1_DEVSLOT_MAX(temp); 584 585 DPRINTF("Max slots: %u\n", sc->sc_noslot); 586 587 if (sc->sc_noslot > XHCI_MAX_DEVICES) 588 sc->sc_noslot = XHCI_MAX_DEVICES; 589 590 temp = XREAD4(sc, capa, XHCI_HCSPARAMS2); 591 592 DPRINTF("HCS2=0x%08x\n", temp); 593 594 /* get isochronous scheduling threshold */ 595 sc->sc_ist = XHCI_HCS2_IST(temp); 596 597 /* get number of scratchpads */ 598 sc->sc_noscratch = XHCI_HCS2_SPB_MAX(temp); 599 600 if (sc->sc_noscratch > XHCI_MAX_SCRATCHPADS) { 601 device_printf(sc->sc_bus.parent, "XHCI request " 602 "too many scratchpads\n"); 603 return (ENOMEM); 604 } 605 606 DPRINTF("Max scratch: %u\n", sc->sc_noscratch); 607 608 /* get event table size */ 609 sc->sc_erst_max = 1U << XHCI_HCS2_ERST_MAX(temp); 610 if (sc->sc_erst_max > XHCI_MAX_RSEG) 611 sc->sc_erst_max = XHCI_MAX_RSEG; 612 613 temp = XREAD4(sc, capa, XHCI_HCSPARAMS3); 614 615 /* get maximum exit latency */ 616 sc->sc_exit_lat_max = XHCI_HCS3_U1_DEL(temp) + 617 XHCI_HCS3_U2_DEL(temp) + 250 /* us */; 618 619 /* Check if we should use the default IMOD value. */ 620 if (sc->sc_imod_default == 0) 621 sc->sc_imod_default = XHCI_IMOD_DEFAULT; 622 623 /* get all DMA memory */ 624 if (usb_bus_mem_alloc_all(&sc->sc_bus, 625 USB_GET_DMA_TAG(self), &xhci_iterate_hw_softc)) { 626 return (ENOMEM); 627 } 628 629 /* set up command queue mutex and condition varible */ 630 cv_init(&sc->sc_cmd_cv, "CMDQ"); 631 sx_init(&sc->sc_cmd_sx, "CMDQ lock"); 632 633 sc->sc_config_msg[0].hdr.pm_callback = &xhci_configure_msg; 634 sc->sc_config_msg[0].bus = &sc->sc_bus; 635 sc->sc_config_msg[1].hdr.pm_callback = &xhci_configure_msg; 636 sc->sc_config_msg[1].bus = &sc->sc_bus; 637 638 return (0); 639 } 640 641 void 642 xhci_uninit(struct xhci_softc *sc) 643 { 644 /* 645 * NOTE: At this point the control transfer process is gone 646 * and "xhci_configure_msg" is no longer called. Consequently 647 * waiting for the configuration messages to complete is not 648 * needed. 649 */ 650 usb_bus_mem_free_all(&sc->sc_bus, &xhci_iterate_hw_softc); 651 652 cv_destroy(&sc->sc_cmd_cv); 653 sx_destroy(&sc->sc_cmd_sx); 654 } 655 656 static void 657 xhci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) 658 { 659 struct xhci_softc *sc = XHCI_BUS2SC(bus); 660 661 switch (state) { 662 case USB_HW_POWER_SUSPEND: 663 DPRINTF("Stopping the XHCI\n"); 664 xhci_halt_controller(sc); 665 xhci_reset_controller(sc); 666 break; 667 case USB_HW_POWER_SHUTDOWN: 668 DPRINTF("Stopping the XHCI\n"); 669 xhci_halt_controller(sc); 670 xhci_reset_controller(sc); 671 break; 672 case USB_HW_POWER_RESUME: 673 DPRINTF("Starting the XHCI\n"); 674 xhci_start_controller(sc); 675 break; 676 default: 677 break; 678 } 679 } 680 681 static usb_error_t 682 xhci_generic_done_sub(struct usb_xfer *xfer) 683 { 684 struct xhci_td *td; 685 struct xhci_td *td_alt_next; 686 uint32_t len; 687 uint8_t status; 688 689 td = xfer->td_transfer_cache; 690 td_alt_next = td->alt_next; 691 692 if (xfer->aframes != xfer->nframes) 693 usbd_xfer_set_frame_len(xfer, xfer->aframes, 0); 694 695 while (1) { 696 usb_pc_cpu_invalidate(td->page_cache); 697 698 status = td->status; 699 len = td->remainder; 700 701 DPRINTFN(4, "xfer=%p[%u/%u] rem=%u/%u status=%u\n", 702 xfer, (unsigned)xfer->aframes, 703 (unsigned)xfer->nframes, 704 (unsigned)len, (unsigned)td->len, 705 (unsigned)status); 706 707 /* 708 * Verify the status length and 709 * add the length to "frlengths[]": 710 */ 711 if (len > td->len) { 712 /* should not happen */ 713 DPRINTF("Invalid status length, " 714 "0x%04x/0x%04x bytes\n", len, td->len); 715 status = XHCI_TRB_ERROR_LENGTH; 716 } else if (xfer->aframes != xfer->nframes) { 717 xfer->frlengths[xfer->aframes] += td->len - len; 718 } 719 /* Check for last transfer */ 720 if (((void *)td) == xfer->td_transfer_last) { 721 td = NULL; 722 break; 723 } 724 /* Check for transfer error */ 725 if (status != XHCI_TRB_ERROR_SHORT_PKT && 726 status != XHCI_TRB_ERROR_SUCCESS) { 727 /* the transfer is finished */ 728 td = NULL; 729 break; 730 } 731 /* Check for short transfer */ 732 if (len > 0) { 733 if (xfer->flags_int.short_frames_ok || 734 xfer->flags_int.isochronous_xfr || 735 xfer->flags_int.control_xfr) { 736 /* follow alt next */ 737 td = td->alt_next; 738 } else { 739 /* the transfer is finished */ 740 td = NULL; 741 } 742 break; 743 } 744 td = td->obj_next; 745 746 if (td->alt_next != td_alt_next) { 747 /* this USB frame is complete */ 748 break; 749 } 750 } 751 752 /* update transfer cache */ 753 754 xfer->td_transfer_cache = td; 755 756 return ((status == XHCI_TRB_ERROR_STALL) ? USB_ERR_STALLED : 757 (status != XHCI_TRB_ERROR_SHORT_PKT && 758 status != XHCI_TRB_ERROR_SUCCESS) ? USB_ERR_IOERROR : 759 USB_ERR_NORMAL_COMPLETION); 760 } 761 762 static void 763 xhci_generic_done(struct usb_xfer *xfer) 764 { 765 usb_error_t err = 0; 766 767 DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", 768 xfer, xfer->endpoint); 769 770 /* reset scanner */ 771 772 xfer->td_transfer_cache = xfer->td_transfer_first; 773 774 if (xfer->flags_int.control_xfr) { 775 if (xfer->flags_int.control_hdr) 776 err = xhci_generic_done_sub(xfer); 777 778 xfer->aframes = 1; 779 780 if (xfer->td_transfer_cache == NULL) 781 goto done; 782 } 783 784 while (xfer->aframes != xfer->nframes) { 785 err = xhci_generic_done_sub(xfer); 786 xfer->aframes++; 787 788 if (xfer->td_transfer_cache == NULL) 789 goto done; 790 } 791 792 if (xfer->flags_int.control_xfr && 793 !xfer->flags_int.control_act) 794 err = xhci_generic_done_sub(xfer); 795 done: 796 /* transfer is complete */ 797 xhci_device_done(xfer, err); 798 } 799 800 static void 801 xhci_activate_transfer(struct usb_xfer *xfer) 802 { 803 struct xhci_td *td; 804 805 td = xfer->td_transfer_cache; 806 807 usb_pc_cpu_invalidate(td->page_cache); 808 809 if (!(td->td_trb[0].dwTrb3 & htole32(XHCI_TRB_3_CYCLE_BIT))) { 810 /* activate the transfer */ 811 812 td->td_trb[0].dwTrb3 |= htole32(XHCI_TRB_3_CYCLE_BIT); 813 usb_pc_cpu_flush(td->page_cache); 814 815 xhci_endpoint_doorbell(xfer); 816 } 817 } 818 819 static void 820 xhci_skip_transfer(struct usb_xfer *xfer) 821 { 822 struct xhci_td *td; 823 struct xhci_td *td_last; 824 825 td = xfer->td_transfer_cache; 826 td_last = xfer->td_transfer_last; 827 828 td = td->alt_next; 829 830 usb_pc_cpu_invalidate(td->page_cache); 831 832 if (!(td->td_trb[0].dwTrb3 & htole32(XHCI_TRB_3_CYCLE_BIT))) { 833 usb_pc_cpu_invalidate(td_last->page_cache); 834 835 /* copy LINK TRB to current waiting location */ 836 837 td->td_trb[0].qwTrb0 = td_last->td_trb[td_last->ntrb].qwTrb0; 838 td->td_trb[0].dwTrb2 = td_last->td_trb[td_last->ntrb].dwTrb2; 839 usb_pc_cpu_flush(td->page_cache); 840 841 td->td_trb[0].dwTrb3 = td_last->td_trb[td_last->ntrb].dwTrb3; 842 usb_pc_cpu_flush(td->page_cache); 843 844 xhci_endpoint_doorbell(xfer); 845 } 846 } 847 848 /*------------------------------------------------------------------------* 849 * xhci_check_transfer 850 *------------------------------------------------------------------------*/ 851 static void 852 xhci_check_transfer(struct xhci_softc *sc, struct xhci_trb *trb) 853 { 854 struct xhci_endpoint_ext *pepext; 855 int64_t offset; 856 uint64_t td_event; 857 uint32_t temp; 858 uint32_t remainder; 859 uint16_t stream_id = 0; 860 uint16_t i; 861 uint8_t status; 862 uint8_t halted; 863 uint8_t epno; 864 uint8_t index; 865 866 /* decode TRB */ 867 td_event = le64toh(trb->qwTrb0); 868 temp = le32toh(trb->dwTrb2); 869 870 remainder = XHCI_TRB_2_REM_GET(temp); 871 status = XHCI_TRB_2_ERROR_GET(temp); 872 873 temp = le32toh(trb->dwTrb3); 874 epno = XHCI_TRB_3_EP_GET(temp); 875 index = XHCI_TRB_3_SLOT_GET(temp); 876 877 /* check if error means halted */ 878 halted = (status != XHCI_TRB_ERROR_SHORT_PKT && 879 status != XHCI_TRB_ERROR_SUCCESS); 880 881 DPRINTF("slot=%u epno=%u remainder=%u status=%u\n", 882 index, epno, remainder, status); 883 884 if (index > sc->sc_noslot) { 885 DPRINTF("Invalid slot.\n"); 886 return; 887 } 888 889 if ((epno == 0) || (epno >= XHCI_MAX_ENDPOINTS)) { 890 DPRINTF("Invalid endpoint.\n"); 891 return; 892 } 893 894 pepext = &sc->sc_hw.devs[index].endp[epno]; 895 896 /* try to find the USB transfer that generated the event */ 897 for (i = 0;; i++) { 898 struct usb_xfer *xfer; 899 struct xhci_td *td; 900 901 if (i == (XHCI_MAX_TRANSFERS - 1)) { 902 if (pepext->trb_ep_mode != USB_EP_MODE_STREAMS || 903 stream_id == (XHCI_MAX_STREAMS - 1)) 904 break; 905 stream_id++; 906 i = 0; 907 DPRINTFN(5, "stream_id=%u\n", stream_id); 908 } 909 910 xfer = pepext->xfer[i + (XHCI_MAX_TRANSFERS * stream_id)]; 911 if (xfer == NULL) 912 continue; 913 914 td = xfer->td_transfer_cache; 915 916 DPRINTFN(5, "Checking if 0x%016llx == (0x%016llx .. 0x%016llx)\n", 917 (long long)td_event, 918 (long long)td->td_self, 919 (long long)td->td_self + sizeof(td->td_trb)); 920 921 /* 922 * NOTE: Some XHCI implementations might not trigger 923 * an event on the last LINK TRB so we need to 924 * consider both the last and second last event 925 * address as conditions for a successful transfer. 926 * 927 * NOTE: We assume that the XHCI will only trigger one 928 * event per chain of TRBs. 929 */ 930 931 offset = td_event - td->td_self; 932 933 if (offset >= 0 && 934 offset < (int64_t)sizeof(td->td_trb)) { 935 usb_pc_cpu_invalidate(td->page_cache); 936 937 /* compute rest of remainder, if any */ 938 for (i = (offset / 16) + 1; i < td->ntrb; i++) { 939 temp = le32toh(td->td_trb[i].dwTrb2); 940 remainder += XHCI_TRB_2_BYTES_GET(temp); 941 } 942 943 DPRINTFN(5, "New remainder: %u\n", remainder); 944 945 /* clear isochronous transfer errors */ 946 if (xfer->flags_int.isochronous_xfr) { 947 if (halted) { 948 halted = 0; 949 status = XHCI_TRB_ERROR_SUCCESS; 950 remainder = td->len; 951 } 952 } 953 954 /* "td->remainder" is verified later */ 955 td->remainder = remainder; 956 td->status = status; 957 958 usb_pc_cpu_flush(td->page_cache); 959 960 /* 961 * 1) Last transfer descriptor makes the 962 * transfer done 963 */ 964 if (((void *)td) == xfer->td_transfer_last) { 965 DPRINTF("TD is last\n"); 966 xhci_generic_done(xfer); 967 break; 968 } 969 970 /* 971 * 2) Any kind of error makes the transfer 972 * done 973 */ 974 if (halted) { 975 DPRINTF("TD has I/O error\n"); 976 xhci_generic_done(xfer); 977 break; 978 } 979 980 /* 981 * 3) If there is no alternate next transfer, 982 * a short packet also makes the transfer done 983 */ 984 if (td->remainder > 0) { 985 if (td->alt_next == NULL) { 986 DPRINTF( 987 "short TD has no alternate next\n"); 988 xhci_generic_done(xfer); 989 break; 990 } 991 DPRINTF("TD has short pkt\n"); 992 if (xfer->flags_int.short_frames_ok || 993 xfer->flags_int.isochronous_xfr || 994 xfer->flags_int.control_xfr) { 995 /* follow the alt next */ 996 xfer->td_transfer_cache = td->alt_next; 997 xhci_activate_transfer(xfer); 998 break; 999 } 1000 xhci_skip_transfer(xfer); 1001 xhci_generic_done(xfer); 1002 break; 1003 } 1004 1005 /* 1006 * 4) Transfer complete - go to next TD 1007 */ 1008 DPRINTF("Following next TD\n"); 1009 xfer->td_transfer_cache = td->obj_next; 1010 xhci_activate_transfer(xfer); 1011 break; /* there should only be one match */ 1012 } 1013 } 1014 } 1015 1016 static int 1017 xhci_check_command(struct xhci_softc *sc, struct xhci_trb *trb) 1018 { 1019 if (sc->sc_cmd_addr == trb->qwTrb0) { 1020 DPRINTF("Received command event\n"); 1021 sc->sc_cmd_result[0] = trb->dwTrb2; 1022 sc->sc_cmd_result[1] = trb->dwTrb3; 1023 cv_signal(&sc->sc_cmd_cv); 1024 return (1); /* command match */ 1025 } 1026 return (0); 1027 } 1028 1029 static int 1030 xhci_interrupt_poll(struct xhci_softc *sc) 1031 { 1032 struct usb_page_search buf_res; 1033 struct xhci_hw_root *phwr; 1034 uint64_t addr; 1035 uint32_t temp; 1036 int retval = 0; 1037 uint16_t i; 1038 uint8_t event; 1039 uint8_t j; 1040 uint8_t k; 1041 uint8_t t; 1042 1043 usbd_get_page(&sc->sc_hw.root_pc, 0, &buf_res); 1044 1045 phwr = buf_res.buffer; 1046 1047 /* Receive any events */ 1048 1049 usb_pc_cpu_invalidate(&sc->sc_hw.root_pc); 1050 1051 i = sc->sc_event_idx; 1052 j = sc->sc_event_ccs; 1053 t = 2; 1054 1055 while (1) { 1056 temp = le32toh(phwr->hwr_events[i].dwTrb3); 1057 1058 k = (temp & XHCI_TRB_3_CYCLE_BIT) ? 1 : 0; 1059 1060 if (j != k) 1061 break; 1062 1063 event = XHCI_TRB_3_TYPE_GET(temp); 1064 1065 DPRINTFN(10, "event[%u] = %u (0x%016llx 0x%08lx 0x%08lx)\n", 1066 i, event, (long long)le64toh(phwr->hwr_events[i].qwTrb0), 1067 (long)le32toh(phwr->hwr_events[i].dwTrb2), 1068 (long)le32toh(phwr->hwr_events[i].dwTrb3)); 1069 1070 switch (event) { 1071 case XHCI_TRB_EVENT_TRANSFER: 1072 xhci_check_transfer(sc, &phwr->hwr_events[i]); 1073 break; 1074 case XHCI_TRB_EVENT_CMD_COMPLETE: 1075 retval |= xhci_check_command(sc, &phwr->hwr_events[i]); 1076 break; 1077 default: 1078 DPRINTF("Unhandled event = %u\n", event); 1079 break; 1080 } 1081 1082 i++; 1083 1084 if (i == XHCI_MAX_EVENTS) { 1085 i = 0; 1086 j ^= 1; 1087 1088 /* check for timeout */ 1089 if (!--t) 1090 break; 1091 } 1092 } 1093 1094 sc->sc_event_idx = i; 1095 sc->sc_event_ccs = j; 1096 1097 /* 1098 * NOTE: The Event Ring Dequeue Pointer Register is 64-bit 1099 * latched. That means to activate the register we need to 1100 * write both the low and high double word of the 64-bit 1101 * register. 1102 */ 1103 1104 addr = buf_res.physaddr; 1105 addr += __offsetof(struct xhci_hw_root, hwr_events[i]); 1106 1107 /* try to clear busy bit */ 1108 addr |= XHCI_ERDP_LO_BUSY; 1109 1110 XWRITE4(sc, runt, XHCI_ERDP_LO(0), (uint32_t)addr); 1111 XWRITE4(sc, runt, XHCI_ERDP_HI(0), (uint32_t)(addr >> 32)); 1112 1113 return (retval); 1114 } 1115 1116 static usb_error_t 1117 xhci_do_command(struct xhci_softc *sc, struct xhci_trb *trb, 1118 uint16_t timeout_ms) 1119 { 1120 struct usb_page_search buf_res; 1121 struct xhci_hw_root *phwr; 1122 uint64_t addr; 1123 uint32_t temp; 1124 uint8_t i; 1125 uint8_t j; 1126 uint8_t timeout = 0; 1127 int err; 1128 1129 XHCI_CMD_ASSERT_LOCKED(sc); 1130 1131 /* get hardware root structure */ 1132 1133 usbd_get_page(&sc->sc_hw.root_pc, 0, &buf_res); 1134 1135 phwr = buf_res.buffer; 1136 1137 /* Queue command */ 1138 1139 USB_BUS_LOCK(&sc->sc_bus); 1140 retry: 1141 i = sc->sc_command_idx; 1142 j = sc->sc_command_ccs; 1143 1144 DPRINTFN(10, "command[%u] = %u (0x%016llx, 0x%08lx, 0x%08lx)\n", 1145 i, XHCI_TRB_3_TYPE_GET(le32toh(trb->dwTrb3)), 1146 (long long)le64toh(trb->qwTrb0), 1147 (long)le32toh(trb->dwTrb2), 1148 (long)le32toh(trb->dwTrb3)); 1149 1150 phwr->hwr_commands[i].qwTrb0 = trb->qwTrb0; 1151 phwr->hwr_commands[i].dwTrb2 = trb->dwTrb2; 1152 1153 usb_pc_cpu_flush(&sc->sc_hw.root_pc); 1154 1155 temp = trb->dwTrb3; 1156 1157 if (j) 1158 temp |= htole32(XHCI_TRB_3_CYCLE_BIT); 1159 else 1160 temp &= ~htole32(XHCI_TRB_3_CYCLE_BIT); 1161 1162 temp &= ~htole32(XHCI_TRB_3_TC_BIT); 1163 1164 phwr->hwr_commands[i].dwTrb3 = temp; 1165 1166 usb_pc_cpu_flush(&sc->sc_hw.root_pc); 1167 1168 addr = buf_res.physaddr; 1169 addr += __offsetof(struct xhci_hw_root, hwr_commands[i]); 1170 1171 sc->sc_cmd_addr = htole64(addr); 1172 1173 i++; 1174 1175 if (i == (XHCI_MAX_COMMANDS - 1)) { 1176 if (j) { 1177 temp = htole32(XHCI_TRB_3_TC_BIT | 1178 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK) | 1179 XHCI_TRB_3_CYCLE_BIT); 1180 } else { 1181 temp = htole32(XHCI_TRB_3_TC_BIT | 1182 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK)); 1183 } 1184 1185 phwr->hwr_commands[i].dwTrb3 = temp; 1186 1187 usb_pc_cpu_flush(&sc->sc_hw.root_pc); 1188 1189 i = 0; 1190 j ^= 1; 1191 } 1192 1193 sc->sc_command_idx = i; 1194 sc->sc_command_ccs = j; 1195 1196 XWRITE4(sc, door, XHCI_DOORBELL(0), 0); 1197 1198 err = cv_timedwait(&sc->sc_cmd_cv, &sc->sc_bus.bus_mtx, 1199 USB_MS_TO_TICKS(timeout_ms)); 1200 1201 /* 1202 * In some error cases event interrupts are not generated. 1203 * Poll one time to see if the command has completed. 1204 */ 1205 if (err != 0 && xhci_interrupt_poll(sc) != 0) { 1206 DPRINTF("Command was completed when polling\n"); 1207 err = 0; 1208 } 1209 if (err != 0) { 1210 DPRINTF("Command timeout!\n"); 1211 /* 1212 * After some weeks of continuous operation, it has 1213 * been observed that the ASMedia Technology, ASM1042 1214 * SuperSpeed USB Host Controller can suddenly stop 1215 * accepting commands via the command queue. Try to 1216 * first reset the command queue. If that fails do a 1217 * host controller reset. 1218 */ 1219 if (timeout == 0 && 1220 xhci_reset_command_queue_locked(sc) == 0) { 1221 temp = le32toh(trb->dwTrb3); 1222 1223 /* 1224 * Avoid infinite XHCI reset loops if the set 1225 * address command fails to respond due to a 1226 * non-enumerating device: 1227 */ 1228 if (XHCI_TRB_3_TYPE_GET(temp) == XHCI_TRB_TYPE_ADDRESS_DEVICE && 1229 (temp & XHCI_TRB_3_BSR_BIT) == 0) { 1230 DPRINTF("Set address timeout\n"); 1231 } else { 1232 timeout = 1; 1233 goto retry; 1234 } 1235 } else { 1236 DPRINTF("Controller reset!\n"); 1237 usb_bus_reset_async_locked(&sc->sc_bus); 1238 } 1239 err = USB_ERR_TIMEOUT; 1240 trb->dwTrb2 = 0; 1241 trb->dwTrb3 = 0; 1242 } else { 1243 temp = le32toh(sc->sc_cmd_result[0]); 1244 if (XHCI_TRB_2_ERROR_GET(temp) != XHCI_TRB_ERROR_SUCCESS) 1245 err = USB_ERR_IOERROR; 1246 1247 trb->dwTrb2 = sc->sc_cmd_result[0]; 1248 trb->dwTrb3 = sc->sc_cmd_result[1]; 1249 } 1250 1251 USB_BUS_UNLOCK(&sc->sc_bus); 1252 1253 return (err); 1254 } 1255 1256 #if 0 1257 static usb_error_t 1258 xhci_cmd_nop(struct xhci_softc *sc) 1259 { 1260 struct xhci_trb trb; 1261 uint32_t temp; 1262 1263 DPRINTF("\n"); 1264 1265 trb.qwTrb0 = 0; 1266 trb.dwTrb2 = 0; 1267 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NOOP); 1268 1269 trb.dwTrb3 = htole32(temp); 1270 1271 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1272 } 1273 #endif 1274 1275 static usb_error_t 1276 xhci_cmd_enable_slot(struct xhci_softc *sc, uint8_t *pslot) 1277 { 1278 struct xhci_trb trb; 1279 uint32_t temp; 1280 usb_error_t err; 1281 1282 DPRINTF("\n"); 1283 1284 trb.qwTrb0 = 0; 1285 trb.dwTrb2 = 0; 1286 trb.dwTrb3 = htole32(XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ENABLE_SLOT)); 1287 1288 err = xhci_do_command(sc, &trb, 100 /* ms */); 1289 if (err) 1290 goto done; 1291 1292 temp = le32toh(trb.dwTrb3); 1293 1294 *pslot = XHCI_TRB_3_SLOT_GET(temp); 1295 1296 done: 1297 return (err); 1298 } 1299 1300 static usb_error_t 1301 xhci_cmd_disable_slot(struct xhci_softc *sc, uint8_t slot_id) 1302 { 1303 struct xhci_trb trb; 1304 uint32_t temp; 1305 1306 DPRINTF("\n"); 1307 1308 trb.qwTrb0 = 0; 1309 trb.dwTrb2 = 0; 1310 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DISABLE_SLOT) | 1311 XHCI_TRB_3_SLOT_SET(slot_id); 1312 1313 trb.dwTrb3 = htole32(temp); 1314 1315 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1316 } 1317 1318 static usb_error_t 1319 xhci_cmd_set_address(struct xhci_softc *sc, uint64_t input_ctx, 1320 uint8_t bsr, uint8_t slot_id) 1321 { 1322 struct xhci_trb trb; 1323 uint32_t temp; 1324 1325 DPRINTF("\n"); 1326 1327 trb.qwTrb0 = htole64(input_ctx); 1328 trb.dwTrb2 = 0; 1329 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ADDRESS_DEVICE) | 1330 XHCI_TRB_3_SLOT_SET(slot_id); 1331 1332 if (bsr) 1333 temp |= XHCI_TRB_3_BSR_BIT; 1334 1335 trb.dwTrb3 = htole32(temp); 1336 1337 return (xhci_do_command(sc, &trb, 500 /* ms */)); 1338 } 1339 1340 static usb_error_t 1341 xhci_set_address(struct usb_device *udev, struct mtx *mtx, uint16_t address) 1342 { 1343 struct usb_page_search buf_inp; 1344 struct usb_page_search buf_dev; 1345 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 1346 struct xhci_hw_dev *hdev; 1347 struct xhci_slot_ctx *slot; 1348 struct xhci_endpoint_ext *pepext; 1349 uint32_t temp; 1350 uint16_t mps; 1351 usb_error_t err; 1352 uint8_t index; 1353 1354 /* the root HUB case is not handled here */ 1355 if (udev->parent_hub == NULL) 1356 return (USB_ERR_INVAL); 1357 1358 index = udev->controller_slot_id; 1359 1360 hdev = &sc->sc_hw.devs[index]; 1361 1362 if (mtx != NULL) 1363 mtx_unlock(mtx); 1364 1365 XHCI_CMD_LOCK(sc); 1366 1367 switch (hdev->state) { 1368 case XHCI_ST_DEFAULT: 1369 case XHCI_ST_ENABLED: 1370 1371 hdev->state = XHCI_ST_ENABLED; 1372 1373 /* set configure mask to slot and EP0 */ 1374 xhci_configure_mask(udev, 3, 0); 1375 1376 /* configure input slot context structure */ 1377 err = xhci_configure_device(udev); 1378 1379 if (err != 0) { 1380 DPRINTF("Could not configure device\n"); 1381 break; 1382 } 1383 1384 /* configure input endpoint context structure */ 1385 switch (udev->speed) { 1386 case USB_SPEED_LOW: 1387 case USB_SPEED_FULL: 1388 mps = 8; 1389 break; 1390 case USB_SPEED_HIGH: 1391 mps = 64; 1392 break; 1393 default: 1394 mps = 512; 1395 break; 1396 } 1397 1398 pepext = xhci_get_endpoint_ext(udev, 1399 &udev->ctrl_ep_desc); 1400 1401 /* ensure the control endpoint is setup again */ 1402 USB_BUS_LOCK(udev->bus); 1403 pepext->trb_halted = 1; 1404 pepext->trb_running = 0; 1405 USB_BUS_UNLOCK(udev->bus); 1406 1407 err = xhci_configure_endpoint(udev, 1408 &udev->ctrl_ep_desc, pepext, 1409 0, 1, 1, 0, mps, mps, USB_EP_MODE_DEFAULT); 1410 1411 if (err != 0) { 1412 DPRINTF("Could not configure default endpoint\n"); 1413 break; 1414 } 1415 1416 /* execute set address command */ 1417 usbd_get_page(&hdev->input_pc, 0, &buf_inp); 1418 1419 err = xhci_cmd_set_address(sc, buf_inp.physaddr, 1420 (address == 0), index); 1421 1422 if (err != 0) { 1423 temp = le32toh(sc->sc_cmd_result[0]); 1424 if (address == 0 && sc->sc_port_route != NULL && 1425 XHCI_TRB_2_ERROR_GET(temp) == 1426 XHCI_TRB_ERROR_PARAMETER) { 1427 /* LynxPoint XHCI - ports are not switchable */ 1428 /* Un-route all ports from the XHCI */ 1429 sc->sc_port_route(sc->sc_bus.parent, 0, ~0); 1430 } 1431 DPRINTF("Could not set address " 1432 "for slot %u.\n", index); 1433 if (address != 0) 1434 break; 1435 } 1436 1437 /* update device address to new value */ 1438 1439 usbd_get_page(&hdev->device_pc, 0, &buf_dev); 1440 slot = XHCI_GET_CTX(sc, xhci_dev_ctx, ctx_slot, 1441 buf_dev.buffer); 1442 usb_pc_cpu_invalidate(&hdev->device_pc); 1443 1444 temp = le32toh(slot->dwSctx3); 1445 udev->address = XHCI_SCTX_3_DEV_ADDR_GET(temp); 1446 1447 /* update device state to new value */ 1448 1449 if (address != 0) 1450 hdev->state = XHCI_ST_ADDRESSED; 1451 else 1452 hdev->state = XHCI_ST_DEFAULT; 1453 break; 1454 1455 default: 1456 DPRINTF("Wrong state for set address.\n"); 1457 err = USB_ERR_IOERROR; 1458 break; 1459 } 1460 XHCI_CMD_UNLOCK(sc); 1461 1462 if (mtx != NULL) 1463 mtx_lock(mtx); 1464 1465 return (err); 1466 } 1467 1468 static usb_error_t 1469 xhci_cmd_configure_ep(struct xhci_softc *sc, uint64_t input_ctx, 1470 uint8_t deconfigure, uint8_t slot_id) 1471 { 1472 struct xhci_trb trb; 1473 uint32_t temp; 1474 1475 DPRINTF("\n"); 1476 1477 trb.qwTrb0 = htole64(input_ctx); 1478 trb.dwTrb2 = 0; 1479 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_CONFIGURE_EP) | 1480 XHCI_TRB_3_SLOT_SET(slot_id); 1481 1482 if (deconfigure) { 1483 if (sc->sc_no_deconfigure != 0 || xhcidcepquirk != 0) 1484 return (0); /* Success */ 1485 temp |= XHCI_TRB_3_DCEP_BIT; 1486 } 1487 1488 trb.dwTrb3 = htole32(temp); 1489 1490 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1491 } 1492 1493 static usb_error_t 1494 xhci_cmd_evaluate_ctx(struct xhci_softc *sc, uint64_t input_ctx, 1495 uint8_t slot_id) 1496 { 1497 struct xhci_trb trb; 1498 uint32_t temp; 1499 1500 DPRINTF("\n"); 1501 1502 trb.qwTrb0 = htole64(input_ctx); 1503 trb.dwTrb2 = 0; 1504 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_EVALUATE_CTX) | 1505 XHCI_TRB_3_SLOT_SET(slot_id); 1506 trb.dwTrb3 = htole32(temp); 1507 1508 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1509 } 1510 1511 static usb_error_t 1512 xhci_cmd_reset_ep(struct xhci_softc *sc, uint8_t preserve, 1513 uint8_t ep_id, uint8_t slot_id) 1514 { 1515 struct xhci_trb trb; 1516 uint32_t temp; 1517 1518 DPRINTF("\n"); 1519 1520 trb.qwTrb0 = 0; 1521 trb.dwTrb2 = 0; 1522 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_RESET_EP) | 1523 XHCI_TRB_3_SLOT_SET(slot_id) | 1524 XHCI_TRB_3_EP_SET(ep_id); 1525 1526 if (preserve) 1527 temp |= XHCI_TRB_3_PRSV_BIT; 1528 1529 trb.dwTrb3 = htole32(temp); 1530 1531 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1532 } 1533 1534 static usb_error_t 1535 xhci_cmd_set_tr_dequeue_ptr(struct xhci_softc *sc, uint64_t dequeue_ptr, 1536 uint16_t stream_id, uint8_t ep_id, uint8_t slot_id) 1537 { 1538 struct xhci_trb trb; 1539 uint32_t temp; 1540 1541 DPRINTF("\n"); 1542 1543 trb.qwTrb0 = htole64(dequeue_ptr); 1544 1545 temp = XHCI_TRB_2_STREAM_SET(stream_id); 1546 trb.dwTrb2 = htole32(temp); 1547 1548 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SET_TR_DEQUEUE) | 1549 XHCI_TRB_3_SLOT_SET(slot_id) | 1550 XHCI_TRB_3_EP_SET(ep_id); 1551 trb.dwTrb3 = htole32(temp); 1552 1553 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1554 } 1555 1556 static usb_error_t 1557 xhci_cmd_stop_ep(struct xhci_softc *sc, uint8_t suspend, 1558 uint8_t ep_id, uint8_t slot_id) 1559 { 1560 struct xhci_trb trb; 1561 uint32_t temp; 1562 1563 DPRINTF("\n"); 1564 1565 trb.qwTrb0 = 0; 1566 trb.dwTrb2 = 0; 1567 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STOP_EP) | 1568 XHCI_TRB_3_SLOT_SET(slot_id) | 1569 XHCI_TRB_3_EP_SET(ep_id); 1570 1571 if (suspend) 1572 temp |= XHCI_TRB_3_SUSP_EP_BIT; 1573 1574 trb.dwTrb3 = htole32(temp); 1575 1576 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1577 } 1578 1579 static usb_error_t 1580 xhci_cmd_reset_dev(struct xhci_softc *sc, uint8_t slot_id) 1581 { 1582 struct xhci_trb trb; 1583 uint32_t temp; 1584 1585 DPRINTF("\n"); 1586 1587 trb.qwTrb0 = 0; 1588 trb.dwTrb2 = 0; 1589 temp = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_RESET_DEVICE) | 1590 XHCI_TRB_3_SLOT_SET(slot_id); 1591 1592 trb.dwTrb3 = htole32(temp); 1593 1594 return (xhci_do_command(sc, &trb, 100 /* ms */)); 1595 } 1596 1597 /*------------------------------------------------------------------------* 1598 * xhci_interrupt - XHCI interrupt handler 1599 *------------------------------------------------------------------------*/ 1600 void 1601 xhci_interrupt(struct xhci_softc *sc) 1602 { 1603 uint32_t status; 1604 uint32_t temp; 1605 1606 USB_BUS_LOCK(&sc->sc_bus); 1607 1608 status = XREAD4(sc, oper, XHCI_USBSTS); 1609 1610 /* acknowledge interrupts, if any */ 1611 if (status != 0) { 1612 XWRITE4(sc, oper, XHCI_USBSTS, status); 1613 DPRINTFN(16, "real interrupt (status=0x%08x)\n", status); 1614 } 1615 1616 temp = XREAD4(sc, runt, XHCI_IMAN(0)); 1617 1618 /* force clearing of pending interrupts */ 1619 if (temp & XHCI_IMAN_INTR_PEND) 1620 XWRITE4(sc, runt, XHCI_IMAN(0), temp); 1621 1622 /* check for event(s) */ 1623 xhci_interrupt_poll(sc); 1624 1625 if (status & (XHCI_STS_PCD | XHCI_STS_HCH | 1626 XHCI_STS_HSE | XHCI_STS_HCE)) { 1627 if (status & XHCI_STS_PCD) { 1628 xhci_root_intr(sc); 1629 } 1630 1631 if (status & XHCI_STS_HCH) { 1632 printf("%s: host controller halted\n", 1633 __FUNCTION__); 1634 } 1635 1636 if (status & XHCI_STS_HSE) { 1637 printf("%s: host system error\n", 1638 __FUNCTION__); 1639 } 1640 1641 if (status & XHCI_STS_HCE) { 1642 printf("%s: host controller error\n", 1643 __FUNCTION__); 1644 } 1645 } 1646 USB_BUS_UNLOCK(&sc->sc_bus); 1647 } 1648 1649 /*------------------------------------------------------------------------* 1650 * xhci_timeout - XHCI timeout handler 1651 *------------------------------------------------------------------------*/ 1652 static void 1653 xhci_timeout(void *arg) 1654 { 1655 struct usb_xfer *xfer = arg; 1656 1657 DPRINTF("xfer=%p\n", xfer); 1658 1659 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 1660 1661 /* transfer is transferred */ 1662 xhci_device_done(xfer, USB_ERR_TIMEOUT); 1663 } 1664 1665 static void 1666 xhci_do_poll(struct usb_bus *bus) 1667 { 1668 struct xhci_softc *sc = XHCI_BUS2SC(bus); 1669 1670 USB_BUS_LOCK(&sc->sc_bus); 1671 xhci_interrupt_poll(sc); 1672 USB_BUS_UNLOCK(&sc->sc_bus); 1673 } 1674 1675 static void 1676 xhci_setup_generic_chain_sub(struct xhci_std_temp *temp) 1677 { 1678 struct usb_page_search buf_res; 1679 struct xhci_td *td; 1680 struct xhci_td *td_next; 1681 struct xhci_td *td_alt_next; 1682 struct xhci_td *td_first; 1683 uint32_t buf_offset; 1684 uint32_t average; 1685 uint32_t len_old; 1686 uint32_t npkt_off; 1687 uint32_t dword; 1688 uint8_t shortpkt_old; 1689 uint8_t precompute; 1690 uint8_t x; 1691 1692 td_alt_next = NULL; 1693 buf_offset = 0; 1694 shortpkt_old = temp->shortpkt; 1695 len_old = temp->len; 1696 npkt_off = 0; 1697 precompute = 1; 1698 1699 restart: 1700 1701 td = temp->td; 1702 td_next = td_first = temp->td_next; 1703 1704 while (1) { 1705 if (temp->len == 0) { 1706 if (temp->shortpkt) 1707 break; 1708 1709 /* send a Zero Length Packet, ZLP, last */ 1710 1711 temp->shortpkt = 1; 1712 average = 0; 1713 1714 } else { 1715 average = temp->average; 1716 1717 if (temp->len < average) { 1718 if (temp->len % temp->max_packet_size) { 1719 temp->shortpkt = 1; 1720 } 1721 average = temp->len; 1722 } 1723 } 1724 1725 if (td_next == NULL) 1726 panic("%s: out of XHCI transfer descriptors!", __FUNCTION__); 1727 1728 /* get next TD */ 1729 1730 td = td_next; 1731 td_next = td->obj_next; 1732 1733 /* check if we are pre-computing */ 1734 1735 if (precompute) { 1736 /* update remaining length */ 1737 1738 temp->len -= average; 1739 1740 continue; 1741 } 1742 /* fill out current TD */ 1743 1744 td->len = average; 1745 td->remainder = 0; 1746 td->status = 0; 1747 1748 /* update remaining length */ 1749 1750 temp->len -= average; 1751 1752 /* reset TRB index */ 1753 1754 x = 0; 1755 1756 if (temp->trb_type == XHCI_TRB_TYPE_SETUP_STAGE) { 1757 /* immediate data */ 1758 1759 if (average > 8) 1760 average = 8; 1761 1762 td->td_trb[0].qwTrb0 = 0; 1763 1764 usbd_copy_out(temp->pc, temp->offset + buf_offset, 1765 (uint8_t *)(uintptr_t)&td->td_trb[0].qwTrb0, 1766 average); 1767 1768 dword = XHCI_TRB_2_BYTES_SET(8) | 1769 XHCI_TRB_2_TDSZ_SET(0) | 1770 XHCI_TRB_2_IRQ_SET(0); 1771 1772 td->td_trb[0].dwTrb2 = htole32(dword); 1773 1774 dword = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_SETUP_STAGE) | 1775 XHCI_TRB_3_IDT_BIT | XHCI_TRB_3_CYCLE_BIT; 1776 1777 /* check wLength */ 1778 if (td->td_trb[0].qwTrb0 & 1779 htole64(XHCI_TRB_0_WLENGTH_MASK)) { 1780 if (td->td_trb[0].qwTrb0 & 1781 htole64(XHCI_TRB_0_DIR_IN_MASK)) 1782 dword |= XHCI_TRB_3_TRT_IN; 1783 else 1784 dword |= XHCI_TRB_3_TRT_OUT; 1785 } 1786 1787 td->td_trb[0].dwTrb3 = htole32(dword); 1788 #ifdef USB_DEBUG 1789 xhci_dump_trb(&td->td_trb[x]); 1790 #endif 1791 x++; 1792 1793 } else do { 1794 uint32_t npkt; 1795 1796 /* fill out buffer pointers */ 1797 1798 if (average == 0) { 1799 memset(&buf_res, 0, sizeof(buf_res)); 1800 } else { 1801 usbd_get_page(temp->pc, temp->offset + 1802 buf_offset, &buf_res); 1803 1804 /* get length to end of page */ 1805 if (buf_res.length > average) 1806 buf_res.length = average; 1807 1808 /* check for maximum length */ 1809 if (buf_res.length > XHCI_TD_PAGE_SIZE) 1810 buf_res.length = XHCI_TD_PAGE_SIZE; 1811 1812 npkt_off += buf_res.length; 1813 } 1814 1815 /* set up npkt */ 1816 npkt = howmany(len_old - npkt_off, 1817 temp->max_packet_size); 1818 1819 if (npkt == 0) 1820 npkt = 1; 1821 else if (npkt > 31) 1822 npkt = 31; 1823 1824 /* fill out TRB's */ 1825 td->td_trb[x].qwTrb0 = 1826 htole64((uint64_t)buf_res.physaddr); 1827 1828 dword = 1829 XHCI_TRB_2_BYTES_SET(buf_res.length) | 1830 XHCI_TRB_2_TDSZ_SET(npkt) | 1831 XHCI_TRB_2_IRQ_SET(0); 1832 1833 td->td_trb[x].dwTrb2 = htole32(dword); 1834 1835 switch (temp->trb_type) { 1836 case XHCI_TRB_TYPE_ISOCH: 1837 dword = XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_CYCLE_BIT | 1838 XHCI_TRB_3_TBC_SET(temp->tbc) | 1839 XHCI_TRB_3_TLBPC_SET(temp->tlbpc); 1840 if (td != td_first) { 1841 dword |= XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL); 1842 } else if (temp->do_isoc_sync != 0) { 1843 temp->do_isoc_sync = 0; 1844 /* wait until "isoc_frame" */ 1845 dword |= XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ISOCH) | 1846 XHCI_TRB_3_FRID_SET(temp->isoc_frame / 8); 1847 } else { 1848 /* start data transfer at next interval */ 1849 dword |= XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_ISOCH) | 1850 XHCI_TRB_3_ISO_SIA_BIT; 1851 } 1852 if (temp->direction == UE_DIR_IN) 1853 dword |= XHCI_TRB_3_ISP_BIT; 1854 break; 1855 case XHCI_TRB_TYPE_DATA_STAGE: 1856 dword = XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_CYCLE_BIT | 1857 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_DATA_STAGE); 1858 if (temp->direction == UE_DIR_IN) 1859 dword |= XHCI_TRB_3_DIR_IN | XHCI_TRB_3_ISP_BIT; 1860 /* 1861 * Section 3.2.9 in the XHCI 1862 * specification about control 1863 * transfers says that we should use a 1864 * normal-TRB if there are more TRBs 1865 * extending the data-stage 1866 * TRB. Update the "trb_type". 1867 */ 1868 temp->trb_type = XHCI_TRB_TYPE_NORMAL; 1869 break; 1870 case XHCI_TRB_TYPE_STATUS_STAGE: 1871 dword = XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_CYCLE_BIT | 1872 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_STATUS_STAGE); 1873 if (temp->direction == UE_DIR_IN) 1874 dword |= XHCI_TRB_3_DIR_IN; 1875 break; 1876 default: /* XHCI_TRB_TYPE_NORMAL */ 1877 dword = XHCI_TRB_3_CHAIN_BIT | XHCI_TRB_3_CYCLE_BIT | 1878 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_NORMAL); 1879 if (temp->direction == UE_DIR_IN) 1880 dword |= XHCI_TRB_3_ISP_BIT; 1881 break; 1882 } 1883 td->td_trb[x].dwTrb3 = htole32(dword); 1884 1885 average -= buf_res.length; 1886 buf_offset += buf_res.length; 1887 #ifdef USB_DEBUG 1888 xhci_dump_trb(&td->td_trb[x]); 1889 #endif 1890 x++; 1891 1892 } while (average != 0); 1893 1894 td->td_trb[x-1].dwTrb3 |= htole32(XHCI_TRB_3_IOC_BIT); 1895 1896 /* store number of data TRB's */ 1897 1898 td->ntrb = x; 1899 1900 DPRINTF("NTRB=%u\n", x); 1901 1902 /* fill out link TRB */ 1903 1904 if (td_next != NULL) { 1905 /* link the current TD with the next one */ 1906 td->td_trb[x].qwTrb0 = htole64((uint64_t)td_next->td_self); 1907 DPRINTF("LINK=0x%08llx\n", (long long)td_next->td_self); 1908 } else { 1909 /* this field will get updated later */ 1910 DPRINTF("NOLINK\n"); 1911 } 1912 1913 dword = XHCI_TRB_2_IRQ_SET(0); 1914 1915 td->td_trb[x].dwTrb2 = htole32(dword); 1916 1917 dword = XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK) | 1918 XHCI_TRB_3_CYCLE_BIT | XHCI_TRB_3_IOC_BIT | 1919 /* 1920 * CHAIN-BIT: Ensure that a multi-TRB IN-endpoint 1921 * frame only receives a single short packet event 1922 * by setting the CHAIN bit in the LINK field. In 1923 * addition some XHCI controllers have problems 1924 * sending a ZLP unless the CHAIN-BIT is set in 1925 * the LINK TRB. 1926 */ 1927 XHCI_TRB_3_CHAIN_BIT; 1928 1929 td->td_trb[x].dwTrb3 = htole32(dword); 1930 1931 td->alt_next = td_alt_next; 1932 #ifdef USB_DEBUG 1933 xhci_dump_trb(&td->td_trb[x]); 1934 #endif 1935 usb_pc_cpu_flush(td->page_cache); 1936 } 1937 1938 if (precompute) { 1939 precompute = 0; 1940 1941 /* set up alt next pointer, if any */ 1942 if (temp->last_frame) { 1943 td_alt_next = NULL; 1944 } else { 1945 /* we use this field internally */ 1946 td_alt_next = td_next; 1947 } 1948 1949 /* restore */ 1950 temp->shortpkt = shortpkt_old; 1951 temp->len = len_old; 1952 goto restart; 1953 } 1954 1955 /* 1956 * Remove cycle bit from the first TRB if we are 1957 * stepping them: 1958 */ 1959 if (temp->step_td != 0) { 1960 td_first->td_trb[0].dwTrb3 &= ~htole32(XHCI_TRB_3_CYCLE_BIT); 1961 usb_pc_cpu_flush(td_first->page_cache); 1962 } 1963 1964 /* clear TD SIZE to zero, hence this is the last TRB */ 1965 /* remove chain bit because this is the last data TRB in the chain */ 1966 td->td_trb[td->ntrb - 1].dwTrb2 &= ~htole32(XHCI_TRB_2_TDSZ_SET(31)); 1967 td->td_trb[td->ntrb - 1].dwTrb3 &= ~htole32(XHCI_TRB_3_CHAIN_BIT); 1968 /* remove CHAIN-BIT from last LINK TRB */ 1969 td->td_trb[td->ntrb].dwTrb3 &= ~htole32(XHCI_TRB_3_CHAIN_BIT); 1970 1971 usb_pc_cpu_flush(td->page_cache); 1972 1973 temp->td = td; 1974 temp->td_next = td_next; 1975 } 1976 1977 static void 1978 xhci_setup_generic_chain(struct usb_xfer *xfer) 1979 { 1980 struct xhci_std_temp temp; 1981 struct xhci_td *td; 1982 uint32_t x; 1983 uint32_t y; 1984 uint8_t mult; 1985 1986 temp.do_isoc_sync = 0; 1987 temp.step_td = 0; 1988 temp.tbc = 0; 1989 temp.tlbpc = 0; 1990 temp.average = xfer->max_hc_frame_size; 1991 temp.max_packet_size = xfer->max_packet_size; 1992 temp.sc = XHCI_BUS2SC(xfer->xroot->bus); 1993 temp.pc = NULL; 1994 temp.last_frame = 0; 1995 temp.offset = 0; 1996 temp.multishort = xfer->flags_int.isochronous_xfr || 1997 xfer->flags_int.control_xfr || 1998 xfer->flags_int.short_frames_ok; 1999 2000 /* toggle the DMA set we are using */ 2001 xfer->flags_int.curr_dma_set ^= 1; 2002 2003 /* get next DMA set */ 2004 td = xfer->td_start[xfer->flags_int.curr_dma_set]; 2005 2006 temp.td = NULL; 2007 temp.td_next = td; 2008 2009 xfer->td_transfer_first = td; 2010 xfer->td_transfer_cache = td; 2011 2012 if (xfer->flags_int.isochronous_xfr) { 2013 uint8_t shift; 2014 2015 /* compute multiplier for ISOCHRONOUS transfers */ 2016 mult = xfer->endpoint->ecomp ? 2017 UE_GET_SS_ISO_MULT(xfer->endpoint->ecomp->bmAttributes) 2018 : 0; 2019 /* check for USB 2.0 multiplier */ 2020 if (mult == 0) { 2021 mult = (xfer->endpoint->edesc-> 2022 wMaxPacketSize[1] >> 3) & 3; 2023 } 2024 /* range check */ 2025 if (mult > 2) 2026 mult = 3; 2027 else 2028 mult++; 2029 2030 x = XREAD4(temp.sc, runt, XHCI_MFINDEX); 2031 2032 DPRINTF("MFINDEX=0x%08x IST=0x%x\n", x, temp.sc->sc_ist); 2033 2034 switch (usbd_get_speed(xfer->xroot->udev)) { 2035 case USB_SPEED_FULL: 2036 shift = 3; 2037 temp.isoc_delta = 8; /* 1ms */ 2038 break; 2039 default: 2040 shift = usbd_xfer_get_fps_shift(xfer); 2041 temp.isoc_delta = 1U << shift; 2042 break; 2043 } 2044 2045 /* Compute isochronous scheduling threshold. */ 2046 if (temp.sc->sc_ist & 8) 2047 y = (temp.sc->sc_ist & 7) << 3; 2048 else 2049 y = (temp.sc->sc_ist & 7); 2050 2051 /* Range check the IST. */ 2052 if (y < 8) { 2053 y = 0; 2054 } else if (y > 15) { 2055 DPRINTFN(3, "IST(%d) is too big!\n", temp.sc->sc_ist); 2056 /* 2057 * The USB stack minimum isochronous transfer 2058 * size is typically 2x2 ms of payload. If the 2059 * IST makes is above 15 microframes, we have 2060 * an effective scheduling delay of more than 2061 * or equal to 2 milliseconds, which is too 2062 * much. 2063 */ 2064 y = 7; 2065 } else { 2066 /* 2067 * Subtract one millisecond, because the 2068 * generic code adds that to the latency. 2069 */ 2070 y -= 8; 2071 } 2072 2073 if (usbd_xfer_get_isochronous_start_frame( 2074 xfer, x, y, 8, XHCI_MFINDEX_GET(-1), &temp.isoc_frame)) { 2075 /* Start isochronous transfer at specified time. */ 2076 temp.do_isoc_sync = 1; 2077 2078 DPRINTFN(3, "start next=%d\n", temp.isoc_frame); 2079 } 2080 2081 x = 0; 2082 temp.trb_type = XHCI_TRB_TYPE_ISOCH; 2083 2084 } else if (xfer->flags_int.control_xfr) { 2085 /* check if we should prepend a setup message */ 2086 2087 if (xfer->flags_int.control_hdr) { 2088 temp.len = xfer->frlengths[0]; 2089 temp.pc = xfer->frbuffers + 0; 2090 temp.shortpkt = temp.len ? 1 : 0; 2091 temp.trb_type = XHCI_TRB_TYPE_SETUP_STAGE; 2092 temp.direction = 0; 2093 2094 /* check for last frame */ 2095 if (xfer->nframes == 1) { 2096 /* no STATUS stage yet, SETUP is last */ 2097 if (xfer->flags_int.control_act) 2098 temp.last_frame = 1; 2099 } 2100 2101 xhci_setup_generic_chain_sub(&temp); 2102 } 2103 x = 1; 2104 mult = 1; 2105 temp.isoc_delta = 0; 2106 temp.isoc_frame = 0; 2107 temp.trb_type = xfer->flags_int.control_did_data ? 2108 XHCI_TRB_TYPE_NORMAL : XHCI_TRB_TYPE_DATA_STAGE; 2109 } else { 2110 x = 0; 2111 mult = 1; 2112 temp.isoc_delta = 0; 2113 temp.isoc_frame = 0; 2114 temp.trb_type = XHCI_TRB_TYPE_NORMAL; 2115 } 2116 2117 if (x != xfer->nframes) { 2118 /* set up page_cache pointer */ 2119 temp.pc = xfer->frbuffers + x; 2120 /* set endpoint direction */ 2121 temp.direction = UE_GET_DIR(xfer->endpointno); 2122 } 2123 2124 while (x != xfer->nframes) { 2125 /* DATA0 / DATA1 message */ 2126 2127 temp.len = xfer->frlengths[x]; 2128 temp.step_td = ((xfer->endpointno & UE_DIR_IN) && 2129 x != 0 && temp.multishort == 0); 2130 2131 x++; 2132 2133 if (x == xfer->nframes) { 2134 if (xfer->flags_int.control_xfr) { 2135 /* no STATUS stage yet, DATA is last */ 2136 if (xfer->flags_int.control_act) 2137 temp.last_frame = 1; 2138 } else { 2139 temp.last_frame = 1; 2140 } 2141 } 2142 if (temp.len == 0) { 2143 /* make sure that we send an USB packet */ 2144 2145 temp.shortpkt = 0; 2146 2147 temp.tbc = 0; 2148 temp.tlbpc = mult - 1; 2149 2150 } else if (xfer->flags_int.isochronous_xfr) { 2151 uint8_t tdpc; 2152 2153 /* 2154 * Isochronous transfers don't have short 2155 * packet termination: 2156 */ 2157 2158 temp.shortpkt = 1; 2159 2160 /* isochronous transfers have a transfer limit */ 2161 2162 if (temp.len > xfer->max_frame_size) 2163 temp.len = xfer->max_frame_size; 2164 2165 /* compute TD packet count */ 2166 tdpc = howmany(temp.len, xfer->max_packet_size); 2167 2168 temp.tbc = howmany(tdpc, mult) - 1; 2169 temp.tlbpc = (tdpc % mult); 2170 2171 if (temp.tlbpc == 0) 2172 temp.tlbpc = mult - 1; 2173 else 2174 temp.tlbpc--; 2175 } else { 2176 /* regular data transfer */ 2177 2178 temp.shortpkt = xfer->flags.force_short_xfer ? 0 : 1; 2179 } 2180 2181 xhci_setup_generic_chain_sub(&temp); 2182 2183 if (xfer->flags_int.isochronous_xfr) { 2184 temp.offset += xfer->frlengths[x - 1]; 2185 temp.isoc_frame += temp.isoc_delta; 2186 } else { 2187 /* get next Page Cache pointer */ 2188 temp.pc = xfer->frbuffers + x; 2189 } 2190 } 2191 2192 /* check if we should append a status stage */ 2193 2194 if (xfer->flags_int.control_xfr && 2195 !xfer->flags_int.control_act) { 2196 /* 2197 * Send a DATA1 message and invert the current 2198 * endpoint direction. 2199 */ 2200 if (xhcictlstep || temp.sc->sc_ctlstep) { 2201 /* 2202 * Some XHCI controllers will not delay the 2203 * status stage until the next SOF. Force this 2204 * behaviour to avoid failed control 2205 * transfers. 2206 */ 2207 temp.step_td = (xfer->nframes != 0); 2208 } else { 2209 temp.step_td = 0; 2210 } 2211 temp.direction = UE_GET_DIR(xfer->endpointno) ^ UE_DIR_IN; 2212 temp.len = 0; 2213 temp.pc = NULL; 2214 temp.shortpkt = 0; 2215 temp.last_frame = 1; 2216 temp.trb_type = XHCI_TRB_TYPE_STATUS_STAGE; 2217 2218 xhci_setup_generic_chain_sub(&temp); 2219 } 2220 2221 td = temp.td; 2222 2223 /* must have at least one frame! */ 2224 2225 xfer->td_transfer_last = td; 2226 2227 DPRINTF("first=%p last=%p\n", xfer->td_transfer_first, td); 2228 } 2229 2230 static void 2231 xhci_set_slot_pointer(struct xhci_softc *sc, uint8_t index, uint64_t dev_addr) 2232 { 2233 struct usb_page_search buf_res; 2234 struct xhci_dev_ctx_addr *pdctxa; 2235 2236 usbd_get_page(&sc->sc_hw.ctx_pc, 0, &buf_res); 2237 2238 pdctxa = buf_res.buffer; 2239 2240 DPRINTF("addr[%u]=0x%016llx\n", index, (long long)dev_addr); 2241 2242 pdctxa->qwBaaDevCtxAddr[index] = htole64(dev_addr); 2243 2244 usb_pc_cpu_flush(&sc->sc_hw.ctx_pc); 2245 } 2246 2247 static usb_error_t 2248 xhci_configure_mask(struct usb_device *udev, uint32_t mask, uint8_t drop) 2249 { 2250 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2251 struct usb_page_search buf_inp; 2252 struct xhci_input_ctx *input; 2253 struct xhci_slot_ctx *slot; 2254 uint32_t temp; 2255 uint8_t index; 2256 uint8_t x; 2257 2258 index = udev->controller_slot_id; 2259 2260 usbd_get_page(&sc->sc_hw.devs[index].input_pc, 0, &buf_inp); 2261 2262 input = XHCI_GET_CTX(sc, xhci_input_dev_ctx, ctx_input, 2263 buf_inp.buffer); 2264 slot = XHCI_GET_CTX(sc, xhci_input_dev_ctx, ctx_slot, buf_inp.buffer); 2265 2266 if (drop) { 2267 mask &= XHCI_INCTX_NON_CTRL_MASK; 2268 input->dwInCtx0 = htole32(mask); 2269 input->dwInCtx1 = htole32(0); 2270 } else { 2271 /* 2272 * Some hardware requires that we drop the endpoint 2273 * context before adding it again: 2274 */ 2275 input->dwInCtx0 = htole32(mask & XHCI_INCTX_NON_CTRL_MASK); 2276 2277 /* Add new endpoint context */ 2278 input->dwInCtx1 = htole32(mask); 2279 2280 /* find most significant set bit */ 2281 for (x = 31; x != 1; x--) { 2282 if (mask & (1 << x)) 2283 break; 2284 } 2285 2286 /* adjust */ 2287 x--; 2288 2289 /* figure out the maximum number of contexts */ 2290 if (x > sc->sc_hw.devs[index].context_num) 2291 sc->sc_hw.devs[index].context_num = x; 2292 else 2293 x = sc->sc_hw.devs[index].context_num; 2294 2295 /* update number of contexts */ 2296 temp = le32toh(slot->dwSctx0); 2297 temp &= ~XHCI_SCTX_0_CTX_NUM_SET(31); 2298 temp |= XHCI_SCTX_0_CTX_NUM_SET(x + 1); 2299 slot->dwSctx0 = htole32(temp); 2300 } 2301 usb_pc_cpu_flush(&sc->sc_hw.devs[index].input_pc); 2302 return (0); 2303 } 2304 2305 static usb_error_t 2306 xhci_configure_endpoint(struct usb_device *udev, 2307 struct usb_endpoint_descriptor *edesc, struct xhci_endpoint_ext *pepext, 2308 uint16_t interval, uint8_t max_packet_count, 2309 uint8_t mult, uint8_t fps_shift, uint16_t max_packet_size, 2310 uint16_t max_frame_size, uint8_t ep_mode) 2311 { 2312 struct usb_page_search buf_inp; 2313 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2314 struct xhci_endp_ctx *endp; 2315 uint64_t ring_addr = pepext->physaddr; 2316 uint32_t temp; 2317 uint8_t index; 2318 uint8_t epno; 2319 uint8_t type; 2320 2321 index = udev->controller_slot_id; 2322 2323 usbd_get_page(&sc->sc_hw.devs[index].input_pc, 0, &buf_inp); 2324 2325 epno = edesc->bEndpointAddress; 2326 type = edesc->bmAttributes & UE_XFERTYPE; 2327 2328 if (type == UE_CONTROL) 2329 epno |= UE_DIR_IN; 2330 2331 epno = XHCI_EPNO2EPID(epno); 2332 2333 if (epno == 0) 2334 return (USB_ERR_NO_PIPE); /* invalid */ 2335 2336 if (max_packet_count == 0) 2337 return (USB_ERR_BAD_BUFSIZE); 2338 2339 max_packet_count--; 2340 2341 if (mult == 0) 2342 return (USB_ERR_BAD_BUFSIZE); 2343 2344 endp = XHCI_GET_CTX(sc, xhci_input_dev_ctx, ctx_ep[epno - 1], 2345 buf_inp.buffer); 2346 2347 /* store endpoint mode */ 2348 pepext->trb_ep_mode = ep_mode; 2349 /* store bMaxPacketSize for control endpoints */ 2350 pepext->trb_ep_maxp = edesc->wMaxPacketSize[0]; 2351 usb_pc_cpu_flush(pepext->page_cache); 2352 2353 if (ep_mode == USB_EP_MODE_STREAMS) { 2354 temp = XHCI_EPCTX_0_EPSTATE_SET(0) | 2355 XHCI_EPCTX_0_MAXP_STREAMS_SET(XHCI_MAX_STREAMS_LOG - 1) | 2356 XHCI_EPCTX_0_LSA_SET(1); 2357 2358 ring_addr += sizeof(struct xhci_trb) * 2359 XHCI_MAX_TRANSFERS * XHCI_MAX_STREAMS; 2360 } else { 2361 temp = XHCI_EPCTX_0_EPSTATE_SET(0) | 2362 XHCI_EPCTX_0_MAXP_STREAMS_SET(0) | 2363 XHCI_EPCTX_0_LSA_SET(0); 2364 2365 ring_addr |= XHCI_EPCTX_2_DCS_SET(1); 2366 } 2367 2368 switch (udev->speed) { 2369 case USB_SPEED_FULL: 2370 case USB_SPEED_LOW: 2371 /* 1ms -> 125us */ 2372 fps_shift += 3; 2373 break; 2374 default: 2375 break; 2376 } 2377 2378 switch (type) { 2379 case UE_INTERRUPT: 2380 if (fps_shift > 3) 2381 fps_shift--; 2382 temp |= XHCI_EPCTX_0_IVAL_SET(fps_shift); 2383 break; 2384 case UE_ISOCHRONOUS: 2385 temp |= XHCI_EPCTX_0_IVAL_SET(fps_shift); 2386 2387 switch (udev->speed) { 2388 case USB_SPEED_SUPER: 2389 if (mult > 3) 2390 mult = 3; 2391 temp |= XHCI_EPCTX_0_MULT_SET(mult - 1); 2392 max_packet_count /= mult; 2393 break; 2394 default: 2395 break; 2396 } 2397 break; 2398 default: 2399 break; 2400 } 2401 2402 endp->dwEpCtx0 = htole32(temp); 2403 2404 temp = 2405 XHCI_EPCTX_1_HID_SET(0) | 2406 XHCI_EPCTX_1_MAXB_SET(max_packet_count) | 2407 XHCI_EPCTX_1_MAXP_SIZE_SET(max_packet_size); 2408 2409 /* 2410 * Always enable the "three strikes and you are gone" feature 2411 * except for ISOCHRONOUS endpoints. This is suggested by 2412 * section 4.3.3 in the XHCI specification about device slot 2413 * initialisation. 2414 */ 2415 if (type != UE_ISOCHRONOUS) 2416 temp |= XHCI_EPCTX_1_CERR_SET(3); 2417 2418 switch (type) { 2419 case UE_CONTROL: 2420 temp |= XHCI_EPCTX_1_EPTYPE_SET(4); 2421 break; 2422 case UE_ISOCHRONOUS: 2423 temp |= XHCI_EPCTX_1_EPTYPE_SET(1); 2424 break; 2425 case UE_BULK: 2426 temp |= XHCI_EPCTX_1_EPTYPE_SET(2); 2427 break; 2428 default: 2429 temp |= XHCI_EPCTX_1_EPTYPE_SET(3); 2430 break; 2431 } 2432 2433 /* check for IN direction */ 2434 if (epno & 1) 2435 temp |= XHCI_EPCTX_1_EPTYPE_SET(4); 2436 2437 endp->dwEpCtx1 = htole32(temp); 2438 endp->qwEpCtx2 = htole64(ring_addr); 2439 2440 switch (edesc->bmAttributes & UE_XFERTYPE) { 2441 case UE_INTERRUPT: 2442 case UE_ISOCHRONOUS: 2443 temp = XHCI_EPCTX_4_MAX_ESIT_PAYLOAD_SET(max_frame_size) | 2444 XHCI_EPCTX_4_AVG_TRB_LEN_SET(MIN(XHCI_PAGE_SIZE, 2445 max_frame_size)); 2446 break; 2447 case UE_CONTROL: 2448 temp = XHCI_EPCTX_4_AVG_TRB_LEN_SET(8); 2449 break; 2450 default: 2451 temp = XHCI_EPCTX_4_AVG_TRB_LEN_SET(XHCI_PAGE_SIZE); 2452 break; 2453 } 2454 2455 endp->dwEpCtx4 = htole32(temp); 2456 2457 #ifdef USB_DEBUG 2458 xhci_dump_endpoint(endp); 2459 #endif 2460 usb_pc_cpu_flush(&sc->sc_hw.devs[index].input_pc); 2461 2462 return (0); /* success */ 2463 } 2464 2465 static usb_error_t 2466 xhci_configure_endpoint_by_xfer(struct usb_xfer *xfer) 2467 { 2468 struct xhci_endpoint_ext *pepext; 2469 struct usb_endpoint_ss_comp_descriptor *ecomp; 2470 usb_stream_t x; 2471 2472 pepext = xhci_get_endpoint_ext(xfer->xroot->udev, 2473 xfer->endpoint->edesc); 2474 2475 ecomp = xfer->endpoint->ecomp; 2476 2477 for (x = 0; x != XHCI_MAX_STREAMS; x++) { 2478 uint64_t temp; 2479 2480 /* halt any transfers */ 2481 pepext->trb[x * XHCI_MAX_TRANSFERS].dwTrb3 = 0; 2482 2483 /* compute start of TRB ring for stream "x" */ 2484 temp = pepext->physaddr + 2485 (x * XHCI_MAX_TRANSFERS * sizeof(struct xhci_trb)) + 2486 XHCI_SCTX_0_SCT_SEC_TR_RING; 2487 2488 /* make tree structure */ 2489 pepext->trb[(XHCI_MAX_TRANSFERS * 2490 XHCI_MAX_STREAMS) + x].qwTrb0 = htole64(temp); 2491 2492 /* reserved fields */ 2493 pepext->trb[(XHCI_MAX_TRANSFERS * 2494 XHCI_MAX_STREAMS) + x].dwTrb2 = 0; 2495 pepext->trb[(XHCI_MAX_TRANSFERS * 2496 XHCI_MAX_STREAMS) + x].dwTrb3 = 0; 2497 } 2498 usb_pc_cpu_flush(pepext->page_cache); 2499 2500 return (xhci_configure_endpoint(xfer->xroot->udev, 2501 xfer->endpoint->edesc, pepext, 2502 xfer->interval, xfer->max_packet_count, 2503 (ecomp != NULL) ? UE_GET_SS_ISO_MULT(ecomp->bmAttributes) + 1 : 1, 2504 usbd_xfer_get_fps_shift(xfer), xfer->max_packet_size, 2505 xfer->max_frame_size, xfer->endpoint->ep_mode)); 2506 } 2507 2508 static usb_error_t 2509 xhci_configure_device(struct usb_device *udev) 2510 { 2511 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2512 struct usb_page_search buf_inp; 2513 struct usb_page_cache *pcinp; 2514 struct xhci_slot_ctx *slot; 2515 struct usb_device *hubdev; 2516 uint32_t temp; 2517 uint32_t route; 2518 uint32_t rh_port; 2519 uint8_t is_hub; 2520 uint8_t index; 2521 uint8_t depth; 2522 2523 index = udev->controller_slot_id; 2524 2525 DPRINTF("index=%u\n", index); 2526 2527 pcinp = &sc->sc_hw.devs[index].input_pc; 2528 2529 usbd_get_page(pcinp, 0, &buf_inp); 2530 2531 slot = XHCI_GET_CTX(sc, xhci_input_dev_ctx, ctx_slot, buf_inp.buffer); 2532 2533 rh_port = 0; 2534 route = 0; 2535 2536 /* figure out route string and root HUB port number */ 2537 2538 for (hubdev = udev; hubdev != NULL; hubdev = hubdev->parent_hub) { 2539 if (hubdev->parent_hub == NULL) 2540 break; 2541 2542 depth = hubdev->parent_hub->depth; 2543 2544 /* 2545 * NOTE: HS/FS/LS devices and the SS root HUB can have 2546 * more than 15 ports 2547 */ 2548 2549 rh_port = hubdev->port_no; 2550 2551 if (depth == 0) 2552 break; 2553 2554 if (rh_port > 15) 2555 rh_port = 15; 2556 2557 if (depth < 6) 2558 route |= rh_port << (4 * (depth - 1)); 2559 } 2560 2561 DPRINTF("Route=0x%08x\n", route); 2562 2563 temp = XHCI_SCTX_0_ROUTE_SET(route) | 2564 XHCI_SCTX_0_CTX_NUM_SET( 2565 sc->sc_hw.devs[index].context_num + 1); 2566 2567 switch (udev->speed) { 2568 case USB_SPEED_LOW: 2569 temp |= XHCI_SCTX_0_SPEED_SET(2); 2570 if (udev->parent_hs_hub != NULL && 2571 udev->parent_hs_hub->ddesc.bDeviceProtocol == 2572 UDPROTO_HSHUBMTT) { 2573 DPRINTF("Device inherits MTT\n"); 2574 temp |= XHCI_SCTX_0_MTT_SET(1); 2575 } 2576 break; 2577 case USB_SPEED_HIGH: 2578 temp |= XHCI_SCTX_0_SPEED_SET(3); 2579 if (sc->sc_hw.devs[index].nports != 0 && 2580 udev->ddesc.bDeviceProtocol == UDPROTO_HSHUBMTT) { 2581 DPRINTF("HUB supports MTT\n"); 2582 temp |= XHCI_SCTX_0_MTT_SET(1); 2583 } 2584 break; 2585 case USB_SPEED_FULL: 2586 temp |= XHCI_SCTX_0_SPEED_SET(1); 2587 if (udev->parent_hs_hub != NULL && 2588 udev->parent_hs_hub->ddesc.bDeviceProtocol == 2589 UDPROTO_HSHUBMTT) { 2590 DPRINTF("Device inherits MTT\n"); 2591 temp |= XHCI_SCTX_0_MTT_SET(1); 2592 } 2593 break; 2594 default: 2595 temp |= XHCI_SCTX_0_SPEED_SET(4); 2596 break; 2597 } 2598 2599 is_hub = sc->sc_hw.devs[index].nports != 0 && 2600 (udev->speed == USB_SPEED_SUPER || 2601 udev->speed == USB_SPEED_HIGH); 2602 2603 if (is_hub) 2604 temp |= XHCI_SCTX_0_HUB_SET(1); 2605 2606 slot->dwSctx0 = htole32(temp); 2607 2608 temp = XHCI_SCTX_1_RH_PORT_SET(rh_port); 2609 2610 if (is_hub) { 2611 temp |= XHCI_SCTX_1_NUM_PORTS_SET( 2612 sc->sc_hw.devs[index].nports); 2613 } 2614 2615 slot->dwSctx1 = htole32(temp); 2616 2617 temp = XHCI_SCTX_2_IRQ_TARGET_SET(0); 2618 2619 if (is_hub) { 2620 temp |= XHCI_SCTX_2_TT_THINK_TIME_SET( 2621 sc->sc_hw.devs[index].tt); 2622 } 2623 2624 hubdev = udev->parent_hs_hub; 2625 2626 /* check if we should activate the transaction translator */ 2627 switch (udev->speed) { 2628 case USB_SPEED_FULL: 2629 case USB_SPEED_LOW: 2630 if (hubdev != NULL) { 2631 temp |= XHCI_SCTX_2_TT_HUB_SID_SET( 2632 hubdev->controller_slot_id); 2633 temp |= XHCI_SCTX_2_TT_PORT_NUM_SET( 2634 udev->hs_port_no); 2635 } 2636 break; 2637 default: 2638 break; 2639 } 2640 2641 slot->dwSctx2 = htole32(temp); 2642 2643 /* 2644 * These fields should be initialized to zero, according to 2645 * XHCI section 6.2.2 - slot context: 2646 */ 2647 temp = XHCI_SCTX_3_DEV_ADDR_SET(0) | 2648 XHCI_SCTX_3_SLOT_STATE_SET(0); 2649 2650 slot->dwSctx3 = htole32(temp); 2651 2652 #ifdef USB_DEBUG 2653 xhci_dump_device(slot); 2654 #endif 2655 usb_pc_cpu_flush(pcinp); 2656 2657 return (0); /* success */ 2658 } 2659 2660 static usb_error_t 2661 xhci_alloc_device_ext(struct usb_device *udev) 2662 { 2663 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2664 struct usb_page_search buf_dev; 2665 struct usb_page_search buf_ep; 2666 struct xhci_trb *trb; 2667 struct usb_page_cache *pc; 2668 struct usb_page *pg; 2669 uint64_t addr; 2670 uint8_t index; 2671 uint8_t i; 2672 2673 index = udev->controller_slot_id; 2674 2675 pc = &sc->sc_hw.devs[index].device_pc; 2676 pg = &sc->sc_hw.devs[index].device_pg; 2677 2678 /* need to initialize the page cache */ 2679 pc->tag_parent = sc->sc_bus.dma_parent_tag; 2680 2681 if (usb_pc_alloc_mem(pc, pg, sc->sc_ctx_is_64_byte ? 2682 sizeof(struct xhci_dev_ctx64) : 2683 sizeof(struct xhci_dev_ctx), XHCI_PAGE_SIZE)) 2684 goto error; 2685 2686 usbd_get_page(pc, 0, &buf_dev); 2687 2688 pc = &sc->sc_hw.devs[index].input_pc; 2689 pg = &sc->sc_hw.devs[index].input_pg; 2690 2691 /* need to initialize the page cache */ 2692 pc->tag_parent = sc->sc_bus.dma_parent_tag; 2693 2694 if (usb_pc_alloc_mem(pc, pg, sc->sc_ctx_is_64_byte ? 2695 sizeof(struct xhci_input_dev_ctx64) : 2696 sizeof(struct xhci_input_dev_ctx), XHCI_PAGE_SIZE)) { 2697 goto error; 2698 } 2699 2700 /* initialize all endpoint LINK TRBs */ 2701 2702 for (i = 0; i != XHCI_MAX_ENDPOINTS; i++) { 2703 pc = &sc->sc_hw.devs[index].endpoint_pc[i]; 2704 pg = &sc->sc_hw.devs[index].endpoint_pg[i]; 2705 2706 /* need to initialize the page cache */ 2707 pc->tag_parent = sc->sc_bus.dma_parent_tag; 2708 2709 if (usb_pc_alloc_mem(pc, pg, 2710 sizeof(struct xhci_dev_endpoint_trbs), XHCI_TRB_ALIGN)) { 2711 goto error; 2712 } 2713 2714 /* lookup endpoint TRB ring */ 2715 usbd_get_page(pc, 0, &buf_ep); 2716 2717 /* get TRB pointer */ 2718 trb = buf_ep.buffer; 2719 trb += XHCI_MAX_TRANSFERS - 1; 2720 2721 /* get TRB start address */ 2722 addr = buf_ep.physaddr; 2723 2724 /* create LINK TRB */ 2725 trb->qwTrb0 = htole64(addr); 2726 trb->dwTrb2 = htole32(XHCI_TRB_2_IRQ_SET(0)); 2727 trb->dwTrb3 = htole32(XHCI_TRB_3_CYCLE_BIT | 2728 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK)); 2729 2730 usb_pc_cpu_flush(pc); 2731 } 2732 2733 xhci_set_slot_pointer(sc, index, buf_dev.physaddr); 2734 2735 return (0); 2736 2737 error: 2738 xhci_free_device_ext(udev); 2739 2740 return (USB_ERR_NOMEM); 2741 } 2742 2743 static void 2744 xhci_free_device_ext(struct usb_device *udev) 2745 { 2746 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2747 uint8_t index; 2748 uint8_t i; 2749 2750 index = udev->controller_slot_id; 2751 xhci_set_slot_pointer(sc, index, 0); 2752 2753 usb_pc_free_mem(&sc->sc_hw.devs[index].device_pc); 2754 usb_pc_free_mem(&sc->sc_hw.devs[index].input_pc); 2755 for (i = 0; i != XHCI_MAX_ENDPOINTS; i++) 2756 usb_pc_free_mem(&sc->sc_hw.devs[index].endpoint_pc[i]); 2757 } 2758 2759 static struct xhci_endpoint_ext * 2760 xhci_get_endpoint_ext(struct usb_device *udev, struct usb_endpoint_descriptor *edesc) 2761 { 2762 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 2763 struct xhci_endpoint_ext *pepext; 2764 struct usb_page_cache *pc; 2765 struct usb_page_search buf_ep; 2766 uint8_t epno; 2767 uint8_t index; 2768 2769 epno = edesc->bEndpointAddress; 2770 if ((edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) 2771 epno |= UE_DIR_IN; 2772 2773 epno = XHCI_EPNO2EPID(epno); 2774 2775 index = udev->controller_slot_id; 2776 2777 pc = &sc->sc_hw.devs[index].endpoint_pc[epno]; 2778 2779 usbd_get_page(pc, 0, &buf_ep); 2780 2781 pepext = &sc->sc_hw.devs[index].endp[epno]; 2782 pepext->page_cache = pc; 2783 pepext->trb = buf_ep.buffer; 2784 pepext->physaddr = buf_ep.physaddr; 2785 2786 return (pepext); 2787 } 2788 2789 static void 2790 xhci_endpoint_doorbell(struct usb_xfer *xfer) 2791 { 2792 struct xhci_softc *sc = XHCI_BUS2SC(xfer->xroot->bus); 2793 uint8_t epno; 2794 uint8_t index; 2795 2796 epno = xfer->endpointno; 2797 if (xfer->flags_int.control_xfr) 2798 epno |= UE_DIR_IN; 2799 2800 epno = XHCI_EPNO2EPID(epno); 2801 index = xfer->xroot->udev->controller_slot_id; 2802 2803 if (xfer->xroot->udev->flags.self_suspended == 0) { 2804 XWRITE4(sc, door, XHCI_DOORBELL(index), 2805 epno | XHCI_DB_SID_SET(xfer->stream_id)); 2806 } 2807 } 2808 2809 static void 2810 xhci_transfer_remove(struct usb_xfer *xfer, usb_error_t error) 2811 { 2812 struct xhci_endpoint_ext *pepext; 2813 2814 if (xfer->flags_int.bandwidth_reclaimed) { 2815 xfer->flags_int.bandwidth_reclaimed = 0; 2816 2817 pepext = xhci_get_endpoint_ext(xfer->xroot->udev, 2818 xfer->endpoint->edesc); 2819 2820 pepext->trb_used[xfer->stream_id]--; 2821 2822 pepext->xfer[xfer->qh_pos] = NULL; 2823 2824 if (error && pepext->trb_running != 0) { 2825 pepext->trb_halted = 1; 2826 pepext->trb_running = 0; 2827 } 2828 } 2829 } 2830 2831 static usb_error_t 2832 xhci_transfer_insert(struct usb_xfer *xfer) 2833 { 2834 struct xhci_td *td_first; 2835 struct xhci_td *td_last; 2836 struct xhci_trb *trb_link; 2837 struct xhci_endpoint_ext *pepext; 2838 uint64_t addr; 2839 usb_stream_t id; 2840 uint8_t i; 2841 uint8_t inext; 2842 uint8_t trb_limit; 2843 2844 DPRINTFN(8, "\n"); 2845 2846 id = xfer->stream_id; 2847 2848 /* check if already inserted */ 2849 if (xfer->flags_int.bandwidth_reclaimed) { 2850 DPRINTFN(8, "Already in schedule\n"); 2851 return (0); 2852 } 2853 2854 pepext = xhci_get_endpoint_ext(xfer->xroot->udev, 2855 xfer->endpoint->edesc); 2856 2857 td_first = xfer->td_transfer_first; 2858 td_last = xfer->td_transfer_last; 2859 addr = pepext->physaddr; 2860 2861 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 2862 case UE_CONTROL: 2863 case UE_INTERRUPT: 2864 /* single buffered */ 2865 trb_limit = 1; 2866 break; 2867 default: 2868 /* multi buffered */ 2869 trb_limit = (XHCI_MAX_TRANSFERS - 2); 2870 break; 2871 } 2872 2873 if (pepext->trb_used[id] >= trb_limit) { 2874 DPRINTFN(8, "Too many TDs queued.\n"); 2875 return (USB_ERR_NOMEM); 2876 } 2877 2878 /* check if bMaxPacketSize changed */ 2879 if (xfer->flags_int.control_xfr != 0 && 2880 pepext->trb_ep_maxp != xfer->endpoint->edesc->wMaxPacketSize[0]) { 2881 DPRINTFN(8, "Reconfigure control endpoint\n"); 2882 2883 /* force driver to reconfigure endpoint */ 2884 pepext->trb_halted = 1; 2885 pepext->trb_running = 0; 2886 } 2887 2888 /* check for stopped condition, after putting transfer on interrupt queue */ 2889 if (pepext->trb_running == 0) { 2890 struct xhci_softc *sc = XHCI_BUS2SC(xfer->xroot->bus); 2891 2892 DPRINTFN(8, "Not running\n"); 2893 2894 /* start configuration */ 2895 (void)usb_proc_msignal(USB_BUS_CONTROL_XFER_PROC(&sc->sc_bus), 2896 &sc->sc_config_msg[0], &sc->sc_config_msg[1]); 2897 return (0); 2898 } 2899 2900 pepext->trb_used[id]++; 2901 2902 /* get current TRB index */ 2903 i = pepext->trb_index[id]; 2904 2905 /* get next TRB index */ 2906 inext = (i + 1); 2907 2908 /* the last entry of the ring is a hardcoded link TRB */ 2909 if (inext >= (XHCI_MAX_TRANSFERS - 1)) 2910 inext = 0; 2911 2912 /* store next TRB index, before stream ID offset is added */ 2913 pepext->trb_index[id] = inext; 2914 2915 /* offset for stream */ 2916 i += id * XHCI_MAX_TRANSFERS; 2917 inext += id * XHCI_MAX_TRANSFERS; 2918 2919 /* compute terminating return address */ 2920 addr += (inext * sizeof(struct xhci_trb)); 2921 2922 /* compute link TRB pointer */ 2923 trb_link = td_last->td_trb + td_last->ntrb; 2924 2925 /* update next pointer of last link TRB */ 2926 trb_link->qwTrb0 = htole64(addr); 2927 trb_link->dwTrb2 = htole32(XHCI_TRB_2_IRQ_SET(0)); 2928 trb_link->dwTrb3 = htole32(XHCI_TRB_3_IOC_BIT | 2929 XHCI_TRB_3_CYCLE_BIT | 2930 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK)); 2931 2932 #ifdef USB_DEBUG 2933 xhci_dump_trb(&td_last->td_trb[td_last->ntrb]); 2934 #endif 2935 usb_pc_cpu_flush(td_last->page_cache); 2936 2937 /* write ahead chain end marker */ 2938 2939 pepext->trb[inext].qwTrb0 = 0; 2940 pepext->trb[inext].dwTrb2 = 0; 2941 pepext->trb[inext].dwTrb3 = 0; 2942 2943 /* update next pointer of link TRB */ 2944 2945 pepext->trb[i].qwTrb0 = htole64((uint64_t)td_first->td_self); 2946 pepext->trb[i].dwTrb2 = htole32(XHCI_TRB_2_IRQ_SET(0)); 2947 2948 #ifdef USB_DEBUG 2949 xhci_dump_trb(&pepext->trb[i]); 2950 #endif 2951 usb_pc_cpu_flush(pepext->page_cache); 2952 2953 /* toggle cycle bit which activates the transfer chain */ 2954 2955 pepext->trb[i].dwTrb3 = htole32(XHCI_TRB_3_CYCLE_BIT | 2956 XHCI_TRB_3_TYPE_SET(XHCI_TRB_TYPE_LINK)); 2957 2958 usb_pc_cpu_flush(pepext->page_cache); 2959 2960 DPRINTF("qh_pos = %u\n", i); 2961 2962 pepext->xfer[i] = xfer; 2963 2964 xfer->qh_pos = i; 2965 2966 xfer->flags_int.bandwidth_reclaimed = 1; 2967 2968 xhci_endpoint_doorbell(xfer); 2969 2970 return (0); 2971 } 2972 2973 static void 2974 xhci_root_intr(struct xhci_softc *sc) 2975 { 2976 uint16_t i; 2977 2978 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 2979 2980 /* clear any old interrupt data */ 2981 memset(sc->sc_hub_idata, 0, sizeof(sc->sc_hub_idata)); 2982 2983 for (i = 1; i <= sc->sc_noport; i++) { 2984 /* pick out CHANGE bits from the status register */ 2985 if (XREAD4(sc, oper, XHCI_PORTSC(i)) & ( 2986 XHCI_PS_CSC | XHCI_PS_PEC | 2987 XHCI_PS_OCC | XHCI_PS_WRC | 2988 XHCI_PS_PRC | XHCI_PS_PLC | 2989 XHCI_PS_CEC)) { 2990 sc->sc_hub_idata[i / 8] |= 1 << (i % 8); 2991 DPRINTF("port %d changed\n", i); 2992 } 2993 } 2994 uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, 2995 sizeof(sc->sc_hub_idata)); 2996 } 2997 2998 /*------------------------------------------------------------------------* 2999 * xhci_device_done - XHCI done handler 3000 * 3001 * NOTE: This function can be called two times in a row on 3002 * the same USB transfer. From close and from interrupt. 3003 *------------------------------------------------------------------------*/ 3004 static void 3005 xhci_device_done(struct usb_xfer *xfer, usb_error_t error) 3006 { 3007 DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n", 3008 xfer, xfer->endpoint, error); 3009 3010 /* remove transfer from HW queue */ 3011 xhci_transfer_remove(xfer, error); 3012 3013 /* dequeue transfer and start next transfer */ 3014 usbd_transfer_done(xfer, error); 3015 } 3016 3017 /*------------------------------------------------------------------------* 3018 * XHCI data transfer support (generic type) 3019 *------------------------------------------------------------------------*/ 3020 static void 3021 xhci_device_generic_open(struct usb_xfer *xfer) 3022 { 3023 DPRINTF("\n"); 3024 } 3025 3026 static void 3027 xhci_device_generic_close(struct usb_xfer *xfer) 3028 { 3029 DPRINTF("\n"); 3030 3031 xhci_device_done(xfer, USB_ERR_CANCELLED); 3032 } 3033 3034 static void 3035 xhci_device_generic_multi_enter(struct usb_endpoint *ep, 3036 usb_stream_t stream_id, struct usb_xfer *enter_xfer) 3037 { 3038 struct usb_xfer *xfer; 3039 3040 /* check if there is a current transfer */ 3041 xfer = ep->endpoint_q[stream_id].curr; 3042 if (xfer == NULL) 3043 return; 3044 3045 /* 3046 * Check if the current transfer is started and then pickup 3047 * the next one, if any. Else wait for next start event due to 3048 * block on failure feature. 3049 */ 3050 if (!xfer->flags_int.bandwidth_reclaimed) 3051 return; 3052 3053 xfer = TAILQ_FIRST(&ep->endpoint_q[stream_id].head); 3054 if (xfer == NULL) { 3055 /* 3056 * In case of enter we have to consider that the 3057 * transfer is queued by the USB core after the enter 3058 * method is called. 3059 */ 3060 xfer = enter_xfer; 3061 3062 if (xfer == NULL) 3063 return; 3064 } 3065 3066 /* try to multi buffer */ 3067 xhci_transfer_insert(xfer); 3068 } 3069 3070 static void 3071 xhci_device_generic_enter(struct usb_xfer *xfer) 3072 { 3073 DPRINTF("\n"); 3074 3075 /* set up TD's and QH */ 3076 xhci_setup_generic_chain(xfer); 3077 3078 xhci_device_generic_multi_enter(xfer->endpoint, 3079 xfer->stream_id, xfer); 3080 } 3081 3082 static void 3083 xhci_device_generic_start(struct usb_xfer *xfer) 3084 { 3085 DPRINTF("\n"); 3086 3087 /* try to insert xfer on HW queue */ 3088 xhci_transfer_insert(xfer); 3089 3090 /* try to multi buffer */ 3091 xhci_device_generic_multi_enter(xfer->endpoint, 3092 xfer->stream_id, NULL); 3093 3094 /* add transfer last on interrupt queue */ 3095 usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); 3096 3097 /* start timeout, if any */ 3098 if (xfer->timeout != 0) 3099 usbd_transfer_timeout_ms(xfer, &xhci_timeout, xfer->timeout); 3100 } 3101 3102 static const struct usb_pipe_methods xhci_device_generic_methods = 3103 { 3104 .open = xhci_device_generic_open, 3105 .close = xhci_device_generic_close, 3106 .enter = xhci_device_generic_enter, 3107 .start = xhci_device_generic_start, 3108 }; 3109 3110 /*------------------------------------------------------------------------* 3111 * xhci root HUB support 3112 *------------------------------------------------------------------------* 3113 * Simulate a hardware HUB by handling all the necessary requests. 3114 *------------------------------------------------------------------------*/ 3115 #define HSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) } 3116 3117 static const 3118 struct usb_device_descriptor xhci_devd = 3119 { 3120 .bLength = sizeof(xhci_devd), 3121 .bDescriptorType = UDESC_DEVICE, /* type */ 3122 HSETW(.bcdUSB, 0x0300), /* USB version */ 3123 .bDeviceClass = UDCLASS_HUB, /* class */ 3124 .bDeviceSubClass = UDSUBCLASS_HUB, /* subclass */ 3125 .bDeviceProtocol = UDPROTO_SSHUB, /* protocol */ 3126 .bMaxPacketSize = 9, /* max packet size */ 3127 HSETW(.idVendor, 0x0000), /* vendor */ 3128 HSETW(.idProduct, 0x0000), /* product */ 3129 HSETW(.bcdDevice, 0x0100), /* device version */ 3130 .iManufacturer = 1, 3131 .iProduct = 2, 3132 .iSerialNumber = 0, 3133 .bNumConfigurations = 1, /* # of configurations */ 3134 }; 3135 3136 static const 3137 struct xhci_bos_desc xhci_bosd = { 3138 .bosd = { 3139 .bLength = sizeof(xhci_bosd.bosd), 3140 .bDescriptorType = UDESC_BOS, 3141 HSETW(.wTotalLength, sizeof(xhci_bosd)), 3142 .bNumDeviceCaps = 3, 3143 }, 3144 .usb2extd = { 3145 .bLength = sizeof(xhci_bosd.usb2extd), 3146 .bDescriptorType = 1, 3147 .bDevCapabilityType = 2, 3148 .bmAttributes[0] = 2, 3149 }, 3150 .usbdcd = { 3151 .bLength = sizeof(xhci_bosd.usbdcd), 3152 .bDescriptorType = UDESC_DEVICE_CAPABILITY, 3153 .bDevCapabilityType = 3, 3154 .bmAttributes = 0, /* XXX */ 3155 HSETW(.wSpeedsSupported, 0x000C), 3156 .bFunctionalitySupport = 8, 3157 .bU1DevExitLat = 255, /* dummy - not used */ 3158 .wU2DevExitLat = { 0x00, 0x08 }, 3159 }, 3160 .cidd = { 3161 .bLength = sizeof(xhci_bosd.cidd), 3162 .bDescriptorType = 1, 3163 .bDevCapabilityType = 4, 3164 .bReserved = 0, 3165 .bContainerID = 0, /* XXX */ 3166 }, 3167 }; 3168 3169 static const 3170 struct xhci_config_desc xhci_confd = { 3171 .confd = { 3172 .bLength = sizeof(xhci_confd.confd), 3173 .bDescriptorType = UDESC_CONFIG, 3174 .wTotalLength[0] = sizeof(xhci_confd), 3175 .bNumInterface = 1, 3176 .bConfigurationValue = 1, 3177 .iConfiguration = 0, 3178 .bmAttributes = UC_SELF_POWERED, 3179 .bMaxPower = 0 /* max power */ 3180 }, 3181 .ifcd = { 3182 .bLength = sizeof(xhci_confd.ifcd), 3183 .bDescriptorType = UDESC_INTERFACE, 3184 .bNumEndpoints = 1, 3185 .bInterfaceClass = UICLASS_HUB, 3186 .bInterfaceSubClass = UISUBCLASS_HUB, 3187 .bInterfaceProtocol = 0, 3188 }, 3189 .endpd = { 3190 .bLength = sizeof(xhci_confd.endpd), 3191 .bDescriptorType = UDESC_ENDPOINT, 3192 .bEndpointAddress = UE_DIR_IN | XHCI_INTR_ENDPT, 3193 .bmAttributes = UE_INTERRUPT, 3194 .wMaxPacketSize[0] = 2, /* max 15 ports */ 3195 .bInterval = 255, 3196 }, 3197 .endpcd = { 3198 .bLength = sizeof(xhci_confd.endpcd), 3199 .bDescriptorType = UDESC_ENDPOINT_SS_COMP, 3200 .bMaxBurst = 0, 3201 .bmAttributes = 0, 3202 }, 3203 }; 3204 3205 static const 3206 struct usb_hub_ss_descriptor xhci_hubd = { 3207 .bLength = sizeof(xhci_hubd), 3208 .bDescriptorType = UDESC_SS_HUB, 3209 }; 3210 3211 static usb_error_t 3212 xhci_roothub_exec(struct usb_device *udev, 3213 struct usb_device_request *req, const void **pptr, uint16_t *plength) 3214 { 3215 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 3216 const char *str_ptr; 3217 const void *ptr; 3218 uint32_t port; 3219 uint32_t v; 3220 uint16_t len; 3221 uint16_t i; 3222 uint16_t value; 3223 uint16_t index; 3224 uint8_t j; 3225 usb_error_t err; 3226 3227 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 3228 3229 /* buffer reset */ 3230 ptr = (const void *)&sc->sc_hub_desc; 3231 len = 0; 3232 err = 0; 3233 3234 value = UGETW(req->wValue); 3235 index = UGETW(req->wIndex); 3236 3237 DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x " 3238 "wValue=0x%04x wIndex=0x%04x\n", 3239 req->bmRequestType, req->bRequest, 3240 UGETW(req->wLength), value, index); 3241 3242 #define C(x,y) ((x) | ((y) << 8)) 3243 switch (C(req->bRequest, req->bmRequestType)) { 3244 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 3245 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 3246 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 3247 /* 3248 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 3249 * for the integrated root hub. 3250 */ 3251 break; 3252 case C(UR_GET_CONFIG, UT_READ_DEVICE): 3253 len = 1; 3254 sc->sc_hub_desc.temp[0] = sc->sc_conf; 3255 break; 3256 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 3257 switch (value >> 8) { 3258 case UDESC_DEVICE: 3259 if ((value & 0xff) != 0) { 3260 err = USB_ERR_IOERROR; 3261 goto done; 3262 } 3263 len = sizeof(xhci_devd); 3264 ptr = (const void *)&xhci_devd; 3265 break; 3266 3267 case UDESC_BOS: 3268 if ((value & 0xff) != 0) { 3269 err = USB_ERR_IOERROR; 3270 goto done; 3271 } 3272 len = sizeof(xhci_bosd); 3273 ptr = (const void *)&xhci_bosd; 3274 break; 3275 3276 case UDESC_CONFIG: 3277 if ((value & 0xff) != 0) { 3278 err = USB_ERR_IOERROR; 3279 goto done; 3280 } 3281 len = sizeof(xhci_confd); 3282 ptr = (const void *)&xhci_confd; 3283 break; 3284 3285 case UDESC_STRING: 3286 switch (value & 0xff) { 3287 case 0: /* Language table */ 3288 str_ptr = "\001"; 3289 break; 3290 3291 case 1: /* Vendor */ 3292 str_ptr = sc->sc_vendor; 3293 break; 3294 3295 case 2: /* Product */ 3296 str_ptr = "XHCI root HUB"; 3297 break; 3298 3299 default: 3300 str_ptr = ""; 3301 break; 3302 } 3303 3304 len = usb_make_str_desc( 3305 sc->sc_hub_desc.temp, 3306 sizeof(sc->sc_hub_desc.temp), 3307 str_ptr); 3308 break; 3309 3310 default: 3311 err = USB_ERR_IOERROR; 3312 goto done; 3313 } 3314 break; 3315 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 3316 len = 1; 3317 sc->sc_hub_desc.temp[0] = 0; 3318 break; 3319 case C(UR_GET_STATUS, UT_READ_DEVICE): 3320 len = 2; 3321 USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED); 3322 break; 3323 case C(UR_GET_STATUS, UT_READ_INTERFACE): 3324 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 3325 len = 2; 3326 USETW(sc->sc_hub_desc.stat.wStatus, 0); 3327 break; 3328 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 3329 if (value >= XHCI_MAX_DEVICES) { 3330 err = USB_ERR_IOERROR; 3331 goto done; 3332 } 3333 break; 3334 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 3335 if (value != 0 && value != 1) { 3336 err = USB_ERR_IOERROR; 3337 goto done; 3338 } 3339 sc->sc_conf = value; 3340 break; 3341 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 3342 break; 3343 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 3344 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 3345 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 3346 err = USB_ERR_IOERROR; 3347 goto done; 3348 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 3349 break; 3350 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 3351 break; 3352 /* Hub requests */ 3353 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 3354 break; 3355 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 3356 DPRINTFN(9, "UR_CLEAR_PORT_FEATURE\n"); 3357 3358 if ((index < 1) || 3359 (index > sc->sc_noport)) { 3360 err = USB_ERR_IOERROR; 3361 goto done; 3362 } 3363 port = XHCI_PORTSC(index); 3364 3365 v = XREAD4(sc, oper, port); 3366 i = XHCI_PS_PLS_GET(v); 3367 v &= ~XHCI_PS_CLEAR; 3368 3369 switch (value) { 3370 case UHF_C_BH_PORT_RESET: 3371 XWRITE4(sc, oper, port, v | XHCI_PS_WRC); 3372 break; 3373 case UHF_C_PORT_CONFIG_ERROR: 3374 XWRITE4(sc, oper, port, v | XHCI_PS_CEC); 3375 break; 3376 case UHF_C_PORT_SUSPEND: 3377 case UHF_C_PORT_LINK_STATE: 3378 XWRITE4(sc, oper, port, v | XHCI_PS_PLC); 3379 break; 3380 case UHF_C_PORT_CONNECTION: 3381 XWRITE4(sc, oper, port, v | XHCI_PS_CSC); 3382 break; 3383 case UHF_C_PORT_ENABLE: 3384 XWRITE4(sc, oper, port, v | XHCI_PS_PEC); 3385 break; 3386 case UHF_C_PORT_OVER_CURRENT: 3387 XWRITE4(sc, oper, port, v | XHCI_PS_OCC); 3388 break; 3389 case UHF_C_PORT_RESET: 3390 XWRITE4(sc, oper, port, v | XHCI_PS_PRC); 3391 break; 3392 case UHF_PORT_ENABLE: 3393 if ((sc->sc_quirks & XHCI_QUIRK_DISABLE_PORT_PED) == 0) 3394 XWRITE4(sc, oper, port, v | XHCI_PS_PED); 3395 break; 3396 case UHF_PORT_POWER: 3397 XWRITE4(sc, oper, port, v & ~XHCI_PS_PP); 3398 break; 3399 case UHF_PORT_INDICATOR: 3400 XWRITE4(sc, oper, port, v & ~XHCI_PS_PIC_SET(3)); 3401 break; 3402 case UHF_PORT_SUSPEND: 3403 3404 /* U3 -> U15 */ 3405 if (i == 3) { 3406 XWRITE4(sc, oper, port, v | 3407 XHCI_PS_PLS_SET(0xF) | XHCI_PS_LWS); 3408 } 3409 3410 /* wait 20ms for resume sequence to complete */ 3411 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 50); 3412 3413 /* U0 */ 3414 XWRITE4(sc, oper, port, v | 3415 XHCI_PS_PLS_SET(0) | XHCI_PS_LWS); 3416 break; 3417 default: 3418 err = USB_ERR_IOERROR; 3419 goto done; 3420 } 3421 break; 3422 3423 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 3424 if ((value & 0xff) != 0) { 3425 err = USB_ERR_IOERROR; 3426 goto done; 3427 } 3428 3429 v = XREAD4(sc, capa, XHCI_HCSPARAMS0); 3430 3431 sc->sc_hub_desc.hubd = xhci_hubd; 3432 3433 sc->sc_hub_desc.hubd.bNbrPorts = sc->sc_noport; 3434 3435 if (XHCI_HCS0_PPC(v)) 3436 i = UHD_PWR_INDIVIDUAL; 3437 else 3438 i = UHD_PWR_GANGED; 3439 3440 if (XHCI_HCS0_PIND(v)) 3441 i |= UHD_PORT_IND; 3442 3443 i |= UHD_OC_INDIVIDUAL; 3444 3445 USETW(sc->sc_hub_desc.hubd.wHubCharacteristics, i); 3446 3447 /* see XHCI section 5.4.9: */ 3448 sc->sc_hub_desc.hubd.bPwrOn2PwrGood = 10; 3449 3450 for (j = 1; j <= sc->sc_noport; j++) { 3451 v = XREAD4(sc, oper, XHCI_PORTSC(j)); 3452 if (v & XHCI_PS_DR) { 3453 sc->sc_hub_desc.hubd. 3454 DeviceRemovable[j / 8] |= 1U << (j % 8); 3455 } 3456 } 3457 len = sc->sc_hub_desc.hubd.bLength; 3458 break; 3459 3460 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 3461 len = 16; 3462 memset(sc->sc_hub_desc.temp, 0, 16); 3463 break; 3464 3465 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 3466 DPRINTFN(9, "UR_GET_STATUS i=%d\n", index); 3467 3468 if ((index < 1) || 3469 (index > sc->sc_noport)) { 3470 err = USB_ERR_IOERROR; 3471 goto done; 3472 } 3473 3474 v = XREAD4(sc, oper, XHCI_PORTSC(index)); 3475 3476 DPRINTFN(9, "port status=0x%08x\n", v); 3477 3478 i = UPS_PORT_LINK_STATE_SET(XHCI_PS_PLS_GET(v)); 3479 3480 switch (XHCI_PS_SPEED_GET(v)) { 3481 case XHCI_PS_SPEED_HIGH: 3482 i |= UPS_HIGH_SPEED; 3483 break; 3484 case XHCI_PS_SPEED_LOW: 3485 i |= UPS_LOW_SPEED; 3486 break; 3487 case XHCI_PS_SPEED_FULL: 3488 /* FULL speed */ 3489 break; 3490 default: 3491 i |= UPS_OTHER_SPEED; 3492 break; 3493 } 3494 3495 if (v & XHCI_PS_CCS) 3496 i |= UPS_CURRENT_CONNECT_STATUS; 3497 if (v & XHCI_PS_PED) 3498 i |= UPS_PORT_ENABLED; 3499 if (v & XHCI_PS_OCA) 3500 i |= UPS_OVERCURRENT_INDICATOR; 3501 if (v & XHCI_PS_PR) 3502 i |= UPS_RESET; 3503 #if 0 3504 if (v & XHCI_PS_PP) 3505 /* XXX undefined */ 3506 #endif 3507 USETW(sc->sc_hub_desc.ps.wPortStatus, i); 3508 3509 i = 0; 3510 if (v & XHCI_PS_CSC) 3511 i |= UPS_C_CONNECT_STATUS; 3512 if (v & XHCI_PS_PEC) 3513 i |= UPS_C_PORT_ENABLED; 3514 if (v & XHCI_PS_OCC) 3515 i |= UPS_C_OVERCURRENT_INDICATOR; 3516 if (v & XHCI_PS_WRC) 3517 i |= UPS_C_BH_PORT_RESET; 3518 if (v & XHCI_PS_PRC) 3519 i |= UPS_C_PORT_RESET; 3520 if (v & XHCI_PS_PLC) 3521 i |= UPS_C_PORT_LINK_STATE; 3522 if (v & XHCI_PS_CEC) 3523 i |= UPS_C_PORT_CONFIG_ERROR; 3524 3525 USETW(sc->sc_hub_desc.ps.wPortChange, i); 3526 len = sizeof(sc->sc_hub_desc.ps); 3527 break; 3528 3529 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 3530 err = USB_ERR_IOERROR; 3531 goto done; 3532 3533 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 3534 break; 3535 3536 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 3537 3538 i = index >> 8; 3539 index &= 0x00FF; 3540 3541 if ((index < 1) || 3542 (index > sc->sc_noport)) { 3543 err = USB_ERR_IOERROR; 3544 goto done; 3545 } 3546 3547 port = XHCI_PORTSC(index); 3548 v = XREAD4(sc, oper, port) & ~XHCI_PS_CLEAR; 3549 3550 switch (value) { 3551 case UHF_PORT_U1_TIMEOUT: 3552 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3553 err = USB_ERR_IOERROR; 3554 goto done; 3555 } 3556 port = XHCI_PORTPMSC(index); 3557 v = XREAD4(sc, oper, port); 3558 v &= ~XHCI_PM3_U1TO_SET(0xFF); 3559 v |= XHCI_PM3_U1TO_SET(i); 3560 XWRITE4(sc, oper, port, v); 3561 break; 3562 case UHF_PORT_U2_TIMEOUT: 3563 if (XHCI_PS_SPEED_GET(v) < XHCI_PS_SPEED_SS) { 3564 err = USB_ERR_IOERROR; 3565 goto done; 3566 } 3567 port = XHCI_PORTPMSC(index); 3568 v = XREAD4(sc, oper, port); 3569 v &= ~XHCI_PM3_U2TO_SET(0xFF); 3570 v |= XHCI_PM3_U2TO_SET(i); 3571 XWRITE4(sc, oper, port, v); 3572 break; 3573 case UHF_BH_PORT_RESET: 3574 XWRITE4(sc, oper, port, v | XHCI_PS_WPR); 3575 break; 3576 case UHF_PORT_LINK_STATE: 3577 XWRITE4(sc, oper, port, v | 3578 XHCI_PS_PLS_SET(i) | XHCI_PS_LWS); 3579 /* 4ms settle time */ 3580 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 250); 3581 break; 3582 case UHF_PORT_ENABLE: 3583 DPRINTFN(3, "set port enable %d\n", index); 3584 break; 3585 case UHF_PORT_SUSPEND: 3586 DPRINTFN(6, "suspend port %u (LPM=%u)\n", index, i); 3587 j = XHCI_PS_SPEED_GET(v); 3588 if (j == 0 || j >= XHCI_PS_SPEED_SS) { 3589 /* non-supported speed */ 3590 err = USB_ERR_IOERROR; 3591 goto done; 3592 } 3593 XWRITE4(sc, oper, port, v | 3594 XHCI_PS_PLS_SET(i ? 2 /* LPM */ : 3) | XHCI_PS_LWS); 3595 break; 3596 case UHF_PORT_RESET: 3597 DPRINTFN(6, "reset port %d\n", index); 3598 XWRITE4(sc, oper, port, v | XHCI_PS_PR); 3599 break; 3600 case UHF_PORT_POWER: 3601 DPRINTFN(3, "set port power %d\n", index); 3602 XWRITE4(sc, oper, port, v | XHCI_PS_PP); 3603 break; 3604 case UHF_PORT_TEST: 3605 DPRINTFN(3, "set port test %d\n", index); 3606 break; 3607 case UHF_PORT_INDICATOR: 3608 DPRINTFN(3, "set port indicator %d\n", index); 3609 3610 v &= ~XHCI_PS_PIC_SET(3); 3611 v |= XHCI_PS_PIC_SET(1); 3612 3613 XWRITE4(sc, oper, port, v); 3614 break; 3615 default: 3616 err = USB_ERR_IOERROR; 3617 goto done; 3618 } 3619 break; 3620 3621 case C(UR_CLEAR_TT_BUFFER, UT_WRITE_CLASS_OTHER): 3622 case C(UR_RESET_TT, UT_WRITE_CLASS_OTHER): 3623 case C(UR_GET_TT_STATE, UT_READ_CLASS_OTHER): 3624 case C(UR_STOP_TT, UT_WRITE_CLASS_OTHER): 3625 break; 3626 default: 3627 err = USB_ERR_IOERROR; 3628 goto done; 3629 } 3630 done: 3631 *plength = len; 3632 *pptr = ptr; 3633 return (err); 3634 } 3635 3636 static void 3637 xhci_xfer_setup(struct usb_setup_params *parm) 3638 { 3639 struct usb_page_search page_info; 3640 struct usb_page_cache *pc; 3641 struct usb_xfer *xfer; 3642 void *last_obj; 3643 uint32_t ntd; 3644 uint32_t n; 3645 3646 xfer = parm->curr_xfer; 3647 3648 /* 3649 * The proof for the "ntd" formula is illustrated like this: 3650 * 3651 * +------------------------------------+ 3652 * | | 3653 * | |remainder -> | 3654 * | +-----+---+ | 3655 * | | xxx | x | frm 0 | 3656 * | +-----+---++ | 3657 * | | xxx | xx | frm 1 | 3658 * | +-----+----+ | 3659 * | ... | 3660 * +------------------------------------+ 3661 * 3662 * "xxx" means a completely full USB transfer descriptor 3663 * 3664 * "x" and "xx" means a short USB packet 3665 * 3666 * For the remainder of an USB transfer modulo 3667 * "max_data_length" we need two USB transfer descriptors. 3668 * One to transfer the remaining data and one to finalise with 3669 * a zero length packet in case the "force_short_xfer" flag is 3670 * set. We only need two USB transfer descriptors in the case 3671 * where the transfer length of the first one is a factor of 3672 * "max_frame_size". The rest of the needed USB transfer 3673 * descriptors is given by the buffer size divided by the 3674 * maximum data payload. 3675 */ 3676 parm->hc_max_packet_size = 0x400; 3677 parm->hc_max_packet_count = 16 * 3; 3678 parm->hc_max_frame_size = XHCI_TD_PAYLOAD_MAX; 3679 3680 xfer->flags_int.bdma_enable = 1; 3681 3682 usbd_transfer_setup_sub(parm); 3683 3684 if (xfer->flags_int.isochronous_xfr) { 3685 ntd = ((1 * xfer->nframes) 3686 + (xfer->max_data_length / xfer->max_hc_frame_size)); 3687 } else if (xfer->flags_int.control_xfr) { 3688 ntd = ((2 * xfer->nframes) + 1 /* STATUS */ 3689 + (xfer->max_data_length / xfer->max_hc_frame_size)); 3690 } else { 3691 ntd = ((2 * xfer->nframes) 3692 + (xfer->max_data_length / xfer->max_hc_frame_size)); 3693 } 3694 3695 alloc_dma_set: 3696 3697 if (parm->err) 3698 return; 3699 3700 /* 3701 * Allocate queue heads and transfer descriptors 3702 */ 3703 last_obj = NULL; 3704 3705 if (usbd_transfer_setup_sub_malloc( 3706 parm, &pc, sizeof(struct xhci_td), 3707 XHCI_TD_ALIGN, ntd)) { 3708 parm->err = USB_ERR_NOMEM; 3709 return; 3710 } 3711 if (parm->buf) { 3712 for (n = 0; n != ntd; n++) { 3713 struct xhci_td *td; 3714 3715 usbd_get_page(pc + n, 0, &page_info); 3716 3717 td = page_info.buffer; 3718 3719 /* init TD */ 3720 td->td_self = page_info.physaddr; 3721 td->obj_next = last_obj; 3722 td->page_cache = pc + n; 3723 3724 last_obj = td; 3725 3726 usb_pc_cpu_flush(pc + n); 3727 } 3728 } 3729 xfer->td_start[xfer->flags_int.curr_dma_set] = last_obj; 3730 3731 if (!xfer->flags_int.curr_dma_set) { 3732 xfer->flags_int.curr_dma_set = 1; 3733 goto alloc_dma_set; 3734 } 3735 } 3736 3737 static uint8_t 3738 xhci_get_endpoint_state(struct usb_device *udev, uint8_t epno) 3739 { 3740 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 3741 struct usb_page_search buf_dev; 3742 struct xhci_hw_dev *hdev; 3743 struct xhci_endp_ctx *endp; 3744 uint32_t temp; 3745 3746 MPASS(epno != 0); 3747 3748 hdev = &sc->sc_hw.devs[udev->controller_slot_id]; 3749 3750 usbd_get_page(&hdev->device_pc, 0, &buf_dev); 3751 endp = XHCI_GET_CTX(sc, xhci_dev_ctx, ctx_ep[epno - 1], 3752 buf_dev.buffer); 3753 usb_pc_cpu_invalidate(&hdev->device_pc); 3754 3755 temp = le32toh(endp->dwEpCtx0); 3756 3757 return (XHCI_EPCTX_0_EPSTATE_GET(temp)); 3758 } 3759 3760 static usb_error_t 3761 xhci_configure_reset_endpoint(struct usb_xfer *xfer) 3762 { 3763 struct xhci_softc *sc = XHCI_BUS2SC(xfer->xroot->bus); 3764 struct usb_page_search buf_inp; 3765 struct usb_device *udev; 3766 struct xhci_endpoint_ext *pepext; 3767 struct usb_endpoint_descriptor *edesc; 3768 struct usb_page_cache *pcinp; 3769 usb_error_t err; 3770 usb_stream_t stream_id; 3771 uint32_t mask; 3772 uint8_t index; 3773 uint8_t epno; 3774 uint8_t drop; 3775 3776 pepext = xhci_get_endpoint_ext(xfer->xroot->udev, 3777 xfer->endpoint->edesc); 3778 3779 udev = xfer->xroot->udev; 3780 index = udev->controller_slot_id; 3781 3782 pcinp = &sc->sc_hw.devs[index].input_pc; 3783 3784 usbd_get_page(pcinp, 0, &buf_inp); 3785 3786 edesc = xfer->endpoint->edesc; 3787 3788 epno = edesc->bEndpointAddress; 3789 stream_id = xfer->stream_id; 3790 3791 if ((edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) 3792 epno |= UE_DIR_IN; 3793 3794 epno = XHCI_EPNO2EPID(epno); 3795 3796 if (epno == 0) 3797 return (USB_ERR_NO_PIPE); /* invalid */ 3798 3799 XHCI_CMD_LOCK(sc); 3800 3801 /* configure endpoint */ 3802 3803 err = xhci_configure_endpoint_by_xfer(xfer); 3804 3805 if (err != 0) { 3806 XHCI_CMD_UNLOCK(sc); 3807 return (err); 3808 } 3809 3810 /* 3811 * Get the endpoint into the stopped state according to the 3812 * endpoint context state diagram in the XHCI specification: 3813 */ 3814 switch (xhci_get_endpoint_state(udev, epno)) { 3815 case XHCI_EPCTX_0_EPSTATE_DISABLED: 3816 drop = 0; 3817 break; 3818 case XHCI_EPCTX_0_EPSTATE_STOPPED: 3819 drop = 1; 3820 break; 3821 case XHCI_EPCTX_0_EPSTATE_HALTED: 3822 err = xhci_cmd_reset_ep(sc, 0, epno, index); 3823 drop = (err != 0); 3824 if (drop) 3825 DPRINTF("Could not reset endpoint %u\n", epno); 3826 break; 3827 default: 3828 drop = 1; 3829 err = xhci_cmd_stop_ep(sc, 0, epno, index); 3830 if (err != 0) 3831 DPRINTF("Could not stop endpoint %u\n", epno); 3832 break; 3833 } 3834 3835 err = xhci_cmd_set_tr_dequeue_ptr(sc, 3836 (pepext->physaddr + (stream_id * sizeof(struct xhci_trb) * 3837 XHCI_MAX_TRANSFERS)) | XHCI_EPCTX_2_DCS_SET(1), 3838 stream_id, epno, index); 3839 3840 if (err != 0) 3841 DPRINTF("Could not set dequeue ptr for endpoint %u\n", epno); 3842 3843 /* 3844 * Get the endpoint into the running state according to the 3845 * endpoint context state diagram in the XHCI specification: 3846 */ 3847 3848 mask = (1U << epno); 3849 3850 /* 3851 * So-called control and isochronous transfer types have 3852 * predefined data toggles (USB 2.0) or sequence numbers (USB 3853 * 3.0) and does not need to be dropped. 3854 */ 3855 if (drop != 0 && 3856 (edesc->bmAttributes & UE_XFERTYPE) != UE_CONTROL && 3857 (edesc->bmAttributes & UE_XFERTYPE) != UE_ISOCHRONOUS) { 3858 /* drop endpoint context to reset data toggle value, if any. */ 3859 xhci_configure_mask(udev, mask, 1); 3860 err = xhci_cmd_configure_ep(sc, buf_inp.physaddr, 0, index); 3861 if (err != 0) { 3862 DPRINTF("Could not drop " 3863 "endpoint %u at slot %u.\n", epno, index); 3864 } else { 3865 sc->sc_hw.devs[index].ep_configured &= ~mask; 3866 } 3867 } 3868 3869 /* 3870 * Always need to evaluate the slot context, because the maximum 3871 * number of endpoint contexts is stored there. 3872 */ 3873 xhci_configure_mask(udev, mask | 1U, 0); 3874 3875 if (!(sc->sc_hw.devs[index].ep_configured & mask)) { 3876 err = xhci_cmd_configure_ep(sc, buf_inp.physaddr, 0, index); 3877 if (err == 0) 3878 sc->sc_hw.devs[index].ep_configured |= mask; 3879 } else { 3880 err = xhci_cmd_evaluate_ctx(sc, buf_inp.physaddr, index); 3881 } 3882 3883 if (err != 0) { 3884 DPRINTF("Could not configure " 3885 "endpoint %u at slot %u.\n", epno, index); 3886 } 3887 XHCI_CMD_UNLOCK(sc); 3888 3889 return (0); 3890 } 3891 3892 static void 3893 xhci_xfer_unsetup(struct usb_xfer *xfer) 3894 { 3895 return; 3896 } 3897 3898 static void 3899 xhci_start_dma_delay(struct usb_xfer *xfer) 3900 { 3901 struct xhci_softc *sc = XHCI_BUS2SC(xfer->xroot->bus); 3902 3903 /* put transfer on interrupt queue (again) */ 3904 usbd_transfer_enqueue(&sc->sc_bus.intr_q, xfer); 3905 3906 (void)usb_proc_msignal(USB_BUS_CONTROL_XFER_PROC(&sc->sc_bus), 3907 &sc->sc_config_msg[0], &sc->sc_config_msg[1]); 3908 } 3909 3910 static void 3911 xhci_configure_msg(struct usb_proc_msg *pm) 3912 { 3913 struct xhci_softc *sc; 3914 struct xhci_endpoint_ext *pepext; 3915 struct usb_xfer *xfer; 3916 3917 sc = XHCI_BUS2SC(((struct usb_bus_msg *)pm)->bus); 3918 3919 restart: 3920 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 3921 pepext = xhci_get_endpoint_ext(xfer->xroot->udev, 3922 xfer->endpoint->edesc); 3923 3924 if ((pepext->trb_halted != 0) || 3925 (pepext->trb_running == 0)) { 3926 uint16_t i; 3927 3928 /* clear halted and running */ 3929 pepext->trb_halted = 0; 3930 pepext->trb_running = 0; 3931 3932 /* nuke remaining buffered transfers */ 3933 3934 for (i = 0; i != (XHCI_MAX_TRANSFERS * 3935 XHCI_MAX_STREAMS); i++) { 3936 /* 3937 * NOTE: We need to use the timeout 3938 * error code here else existing 3939 * isochronous clients can get 3940 * confused: 3941 */ 3942 if (pepext->xfer[i] != NULL) { 3943 xhci_device_done(pepext->xfer[i], 3944 USB_ERR_TIMEOUT); 3945 } 3946 } 3947 3948 /* 3949 * NOTE: The USB transfer cannot vanish in 3950 * this state! 3951 */ 3952 3953 USB_BUS_UNLOCK(&sc->sc_bus); 3954 3955 xhci_configure_reset_endpoint(xfer); 3956 3957 USB_BUS_LOCK(&sc->sc_bus); 3958 3959 /* check if halted is still cleared */ 3960 if (pepext->trb_halted == 0) { 3961 pepext->trb_running = 1; 3962 memset(pepext->trb_index, 0, 3963 sizeof(pepext->trb_index)); 3964 } 3965 goto restart; 3966 } 3967 3968 if (xfer->flags_int.did_dma_delay) { 3969 /* remove transfer from interrupt queue (again) */ 3970 usbd_transfer_dequeue(xfer); 3971 3972 /* we are finally done */ 3973 usb_dma_delay_done_cb(xfer); 3974 3975 /* queue changed - restart */ 3976 goto restart; 3977 } 3978 } 3979 3980 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 3981 /* try to insert xfer on HW queue */ 3982 xhci_transfer_insert(xfer); 3983 3984 /* try to multi buffer */ 3985 xhci_device_generic_multi_enter(xfer->endpoint, 3986 xfer->stream_id, NULL); 3987 } 3988 } 3989 3990 static void 3991 xhci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, 3992 struct usb_endpoint *ep) 3993 { 3994 struct xhci_endpoint_ext *pepext; 3995 struct xhci_softc *sc; 3996 uint8_t index; 3997 uint8_t epno; 3998 3999 DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d\n", 4000 ep, udev->address, edesc->bEndpointAddress, udev->flags.usb_mode); 4001 4002 if (udev->parent_hub == NULL) { 4003 /* root HUB has special endpoint handling */ 4004 return; 4005 } 4006 4007 ep->methods = &xhci_device_generic_methods; 4008 4009 pepext = xhci_get_endpoint_ext(udev, edesc); 4010 4011 USB_BUS_LOCK(udev->bus); 4012 pepext->trb_halted = 1; 4013 pepext->trb_running = 0; 4014 4015 /* 4016 * When doing an alternate setting, except for control 4017 * endpoints, we need to re-configure the XHCI endpoint 4018 * context: 4019 */ 4020 if ((edesc->bEndpointAddress & UE_ADDR) != 0) { 4021 sc = XHCI_BUS2SC(udev->bus); 4022 index = udev->controller_slot_id; 4023 epno = XHCI_EPNO2EPID(edesc->bEndpointAddress); 4024 sc->sc_hw.devs[index].ep_configured &= ~(1U << epno); 4025 } 4026 USB_BUS_UNLOCK(udev->bus); 4027 } 4028 4029 static void 4030 xhci_ep_uninit(struct usb_device *udev, struct usb_endpoint *ep) 4031 { 4032 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4033 const struct usb_endpoint_descriptor *edesc = ep->edesc; 4034 struct usb_page_search buf_inp; 4035 struct usb_page_cache *pcinp; 4036 uint32_t mask; 4037 uint8_t index; 4038 uint8_t epno; 4039 usb_error_t err; 4040 4041 if (udev->parent_hub == NULL) { 4042 /* root HUB has special endpoint handling */ 4043 return; 4044 } 4045 4046 if ((edesc->bEndpointAddress & UE_ADDR) == 0) { 4047 /* control endpoint is never unconfigured */ 4048 return; 4049 } 4050 4051 XHCI_CMD_LOCK(sc); 4052 index = udev->controller_slot_id; 4053 epno = XHCI_EPNO2EPID(edesc->bEndpointAddress); 4054 mask = 1U << epno; 4055 4056 if (sc->sc_hw.devs[index].ep_configured & mask) { 4057 USB_BUS_LOCK(udev->bus); 4058 xhci_configure_mask(udev, mask, 1); 4059 USB_BUS_UNLOCK(udev->bus); 4060 4061 pcinp = &sc->sc_hw.devs[index].input_pc; 4062 usbd_get_page(pcinp, 0, &buf_inp); 4063 err = xhci_cmd_configure_ep(sc, buf_inp.physaddr, 0, index); 4064 if (err) { 4065 DPRINTF("Unconfiguring endpoint failed: %d\n", err); 4066 } else { 4067 USB_BUS_LOCK(udev->bus); 4068 sc->sc_hw.devs[index].ep_configured &= ~mask; 4069 USB_BUS_UNLOCK(udev->bus); 4070 } 4071 } 4072 XHCI_CMD_UNLOCK(sc); 4073 } 4074 4075 static void 4076 xhci_ep_clear_stall(struct usb_device *udev, struct usb_endpoint *ep) 4077 { 4078 struct xhci_endpoint_ext *pepext; 4079 4080 DPRINTF("\n"); 4081 4082 if (udev->flags.usb_mode != USB_MODE_HOST) { 4083 /* not supported */ 4084 return; 4085 } 4086 if (udev->parent_hub == NULL) { 4087 /* root HUB has special endpoint handling */ 4088 return; 4089 } 4090 4091 pepext = xhci_get_endpoint_ext(udev, ep->edesc); 4092 4093 USB_BUS_LOCK(udev->bus); 4094 pepext->trb_halted = 1; 4095 pepext->trb_running = 0; 4096 USB_BUS_UNLOCK(udev->bus); 4097 } 4098 4099 static usb_error_t 4100 xhci_device_init(struct usb_device *udev) 4101 { 4102 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4103 usb_error_t err; 4104 uint8_t temp; 4105 4106 /* no init for root HUB */ 4107 if (udev->parent_hub == NULL) 4108 return (0); 4109 4110 XHCI_CMD_LOCK(sc); 4111 4112 /* set invalid default */ 4113 4114 udev->controller_slot_id = sc->sc_noslot + 1; 4115 4116 /* try to get a new slot ID from the XHCI */ 4117 4118 err = xhci_cmd_enable_slot(sc, &temp); 4119 4120 if (err) { 4121 XHCI_CMD_UNLOCK(sc); 4122 return (err); 4123 } 4124 4125 if (temp > sc->sc_noslot) { 4126 XHCI_CMD_UNLOCK(sc); 4127 return (USB_ERR_BAD_ADDRESS); 4128 } 4129 4130 if (sc->sc_hw.devs[temp].state != XHCI_ST_DISABLED) { 4131 DPRINTF("slot %u already allocated.\n", temp); 4132 XHCI_CMD_UNLOCK(sc); 4133 return (USB_ERR_BAD_ADDRESS); 4134 } 4135 4136 /* store slot ID for later reference */ 4137 4138 udev->controller_slot_id = temp; 4139 4140 /* reset data structure */ 4141 4142 memset(&sc->sc_hw.devs[temp], 0, sizeof(sc->sc_hw.devs[0])); 4143 4144 /* set mark slot allocated */ 4145 4146 sc->sc_hw.devs[temp].state = XHCI_ST_ENABLED; 4147 4148 err = xhci_alloc_device_ext(udev); 4149 4150 XHCI_CMD_UNLOCK(sc); 4151 4152 /* get device into default state */ 4153 4154 if (err == 0) 4155 err = xhci_set_address(udev, NULL, 0); 4156 4157 return (err); 4158 } 4159 4160 static void 4161 xhci_device_uninit(struct usb_device *udev) 4162 { 4163 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4164 uint8_t index; 4165 4166 /* no init for root HUB */ 4167 if (udev->parent_hub == NULL) 4168 return; 4169 4170 XHCI_CMD_LOCK(sc); 4171 4172 index = udev->controller_slot_id; 4173 4174 if (index <= sc->sc_noslot) { 4175 xhci_cmd_disable_slot(sc, index); 4176 sc->sc_hw.devs[index].state = XHCI_ST_DISABLED; 4177 4178 /* free device extension */ 4179 xhci_free_device_ext(udev); 4180 } 4181 4182 XHCI_CMD_UNLOCK(sc); 4183 } 4184 4185 static void 4186 xhci_get_dma_delay(struct usb_device *udev, uint32_t *pus) 4187 { 4188 /* 4189 * Wait until the hardware has finished any possible use of 4190 * the transfer descriptor(s) 4191 */ 4192 *pus = 2048; /* microseconds */ 4193 } 4194 4195 static void 4196 xhci_device_resume(struct usb_device *udev) 4197 { 4198 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4199 uint8_t index; 4200 uint8_t n; 4201 uint8_t p; 4202 4203 DPRINTF("\n"); 4204 4205 /* check for root HUB */ 4206 if (udev->parent_hub == NULL) 4207 return; 4208 4209 index = udev->controller_slot_id; 4210 4211 XHCI_CMD_LOCK(sc); 4212 4213 /* blindly resume all endpoints */ 4214 4215 USB_BUS_LOCK(udev->bus); 4216 4217 for (n = 1; n != XHCI_MAX_ENDPOINTS; n++) { 4218 for (p = 0; p != XHCI_MAX_STREAMS; p++) { 4219 XWRITE4(sc, door, XHCI_DOORBELL(index), 4220 n | XHCI_DB_SID_SET(p)); 4221 } 4222 } 4223 4224 USB_BUS_UNLOCK(udev->bus); 4225 4226 XHCI_CMD_UNLOCK(sc); 4227 } 4228 4229 static void 4230 xhci_device_suspend(struct usb_device *udev) 4231 { 4232 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4233 uint8_t index; 4234 uint8_t n; 4235 usb_error_t err; 4236 4237 DPRINTF("\n"); 4238 4239 /* check for root HUB */ 4240 if (udev->parent_hub == NULL) 4241 return; 4242 4243 index = udev->controller_slot_id; 4244 4245 XHCI_CMD_LOCK(sc); 4246 4247 /* blindly suspend all endpoints */ 4248 4249 for (n = 1; n != XHCI_MAX_ENDPOINTS; n++) { 4250 err = xhci_cmd_stop_ep(sc, 1, n, index); 4251 if (err != 0) { 4252 DPRINTF("Failed to suspend endpoint " 4253 "%u on slot %u (ignored).\n", n, index); 4254 } 4255 } 4256 4257 XHCI_CMD_UNLOCK(sc); 4258 } 4259 4260 static void 4261 xhci_set_hw_power(struct usb_bus *bus) 4262 { 4263 DPRINTF("\n"); 4264 } 4265 4266 static void 4267 xhci_device_state_change(struct usb_device *udev) 4268 { 4269 struct xhci_softc *sc = XHCI_BUS2SC(udev->bus); 4270 struct usb_page_search buf_inp; 4271 usb_error_t err; 4272 uint8_t index; 4273 4274 /* check for root HUB */ 4275 if (udev->parent_hub == NULL) 4276 return; 4277 4278 index = udev->controller_slot_id; 4279 4280 DPRINTF("\n"); 4281 4282 if (usb_get_device_state(udev) == USB_STATE_CONFIGURED) { 4283 err = uhub_query_info(udev, &sc->sc_hw.devs[index].nports, 4284 &sc->sc_hw.devs[index].tt); 4285 if (err != 0) 4286 sc->sc_hw.devs[index].nports = 0; 4287 } 4288 4289 XHCI_CMD_LOCK(sc); 4290 4291 switch (usb_get_device_state(udev)) { 4292 case USB_STATE_POWERED: 4293 if (sc->sc_hw.devs[index].state == XHCI_ST_DEFAULT) 4294 break; 4295 4296 /* set default state */ 4297 sc->sc_hw.devs[index].state = XHCI_ST_DEFAULT; 4298 sc->sc_hw.devs[index].ep_configured = 3U; 4299 4300 /* reset number of contexts */ 4301 sc->sc_hw.devs[index].context_num = 0; 4302 4303 err = xhci_cmd_reset_dev(sc, index); 4304 4305 if (err != 0) { 4306 DPRINTF("Device reset failed " 4307 "for slot %u.\n", index); 4308 } 4309 break; 4310 4311 case USB_STATE_ADDRESSED: 4312 if (sc->sc_hw.devs[index].state == XHCI_ST_ADDRESSED) 4313 break; 4314 4315 sc->sc_hw.devs[index].state = XHCI_ST_ADDRESSED; 4316 sc->sc_hw.devs[index].ep_configured = 3U; 4317 4318 /* set configure mask to slot only */ 4319 xhci_configure_mask(udev, 1, 0); 4320 4321 /* deconfigure all endpoints, except EP0 */ 4322 err = xhci_cmd_configure_ep(sc, 0, 1, index); 4323 4324 if (err) { 4325 DPRINTF("Failed to deconfigure " 4326 "slot %u.\n", index); 4327 } 4328 break; 4329 4330 case USB_STATE_CONFIGURED: 4331 if (sc->sc_hw.devs[index].state == XHCI_ST_CONFIGURED) { 4332 /* deconfigure all endpoints, except EP0 */ 4333 err = xhci_cmd_configure_ep(sc, 0, 1, index); 4334 4335 if (err) { 4336 DPRINTF("Failed to deconfigure " 4337 "slot %u.\n", index); 4338 } 4339 } 4340 4341 /* set configured state */ 4342 sc->sc_hw.devs[index].state = XHCI_ST_CONFIGURED; 4343 sc->sc_hw.devs[index].ep_configured = 3U; 4344 4345 /* reset number of contexts */ 4346 sc->sc_hw.devs[index].context_num = 0; 4347 4348 usbd_get_page(&sc->sc_hw.devs[index].input_pc, 0, &buf_inp); 4349 4350 xhci_configure_mask(udev, 3, 0); 4351 4352 err = xhci_configure_device(udev); 4353 if (err != 0) { 4354 DPRINTF("Could not configure device " 4355 "at slot %u.\n", index); 4356 } 4357 4358 err = xhci_cmd_evaluate_ctx(sc, buf_inp.physaddr, index); 4359 if (err != 0) { 4360 DPRINTF("Could not evaluate device " 4361 "context at slot %u.\n", index); 4362 } 4363 break; 4364 4365 default: 4366 break; 4367 } 4368 XHCI_CMD_UNLOCK(sc); 4369 } 4370 4371 static usb_error_t 4372 xhci_set_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep, 4373 uint8_t ep_mode) 4374 { 4375 switch (ep_mode) { 4376 case USB_EP_MODE_DEFAULT: 4377 return (0); 4378 case USB_EP_MODE_STREAMS: 4379 if (xhcistreams == 0 || 4380 (ep->edesc->bmAttributes & UE_XFERTYPE) != UE_BULK || 4381 udev->speed != USB_SPEED_SUPER) 4382 return (USB_ERR_INVAL); 4383 return (0); 4384 default: 4385 return (USB_ERR_INVAL); 4386 } 4387 } 4388 4389 static const struct usb_bus_methods xhci_bus_methods = { 4390 .endpoint_init = xhci_ep_init, 4391 .endpoint_uninit = xhci_ep_uninit, 4392 .xfer_setup = xhci_xfer_setup, 4393 .xfer_unsetup = xhci_xfer_unsetup, 4394 .get_dma_delay = xhci_get_dma_delay, 4395 .device_init = xhci_device_init, 4396 .device_uninit = xhci_device_uninit, 4397 .device_resume = xhci_device_resume, 4398 .device_suspend = xhci_device_suspend, 4399 .set_hw_power = xhci_set_hw_power, 4400 .roothub_exec = xhci_roothub_exec, 4401 .xfer_poll = xhci_do_poll, 4402 .start_dma_delay = xhci_start_dma_delay, 4403 .set_address = xhci_set_address, 4404 .clear_stall = xhci_ep_clear_stall, 4405 .device_state_change = xhci_device_state_change, 4406 .set_hw_power_sleep = xhci_set_hw_power_sleep, 4407 .set_endpoint_mode = xhci_set_endpoint_mode, 4408 }; 4409