xref: /freebsd/sys/dev/usb/controller/uhci.h (revision c66ec88fed842fbaad62c30d510644ceb7bd2d71)
1 /* $FreeBSD$ */
2 /*-
3  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
4  *
5  * Copyright (c) 1998 The NetBSD Foundation, Inc.
6  * All rights reserved.
7  *
8  * This code is derived from software contributed to The NetBSD Foundation
9  * by Lennart Augustsson (lennart@augustsson.net) at
10  * Carlstedt Research & Technology.
11  *
12  * Redistribution and use in source and binary forms, with or without
13  * modification, are permitted provided that the following conditions
14  * are met:
15  * 1. Redistributions of source code must retain the above copyright
16  *    notice, this list of conditions and the following disclaimer.
17  * 2. Redistributions in binary form must reproduce the above copyright
18  *    notice, this list of conditions and the following disclaimer in the
19  *    documentation and/or other materials provided with the distribution.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
22  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
23  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
24  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
25  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
26  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
27  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
28  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
29  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
30  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
31  * POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 #ifndef _UHCI_H_
35 #define	_UHCI_H_
36 
37 #define	UHCI_MAX_DEVICES MIN(USB_MAX_DEVICES, 128)
38 
39 #define	UHCI_FRAMELIST_COUNT	1024	/* units */
40 #define	UHCI_FRAMELIST_ALIGN	4096	/* bytes */
41 
42 /* Structures alignment (bytes) */
43 #define	UHCI_TD_ALIGN		16
44 #define	UHCI_QH_ALIGN		16
45 
46 #if	((USB_PAGE_SIZE < UHCI_TD_ALIGN) || (UHCI_TD_ALIGN == 0) ||	\
47 	(USB_PAGE_SIZE < UHCI_QH_ALIGN) || (UHCI_QH_ALIGN == 0))
48 #error	"Invalid USB page size!"
49 #endif
50 
51 typedef uint32_t uhci_physaddr_t;
52 
53 #define	UHCI_PTR_T		0x00000001
54 #define	UHCI_PTR_TD		0x00000000
55 #define	UHCI_PTR_QH		0x00000002
56 #define	UHCI_PTR_VF		0x00000004
57 
58 /*
59  * The Queue Heads (QH) and Transfer Descriptors (TD) are accessed by
60  * both the CPU and the USB-controller which run concurrently. Great
61  * care must be taken. When the data-structures are linked into the
62  * USB controller's frame list, the USB-controller "owns" the
63  * td_status and qh_elink fields, which will not be written by the
64  * CPU.
65  *
66  */
67 
68 struct uhci_td {
69 /*
70  * Data used by the UHCI controller.
71  * volatile is used in order to mantain struct members ordering.
72  */
73 	volatile uint32_t td_next;
74 	volatile uint32_t td_status;
75 #define	UHCI_TD_GET_ACTLEN(s)	(((s) + 1) & 0x3ff)
76 #define	UHCI_TD_ZERO_ACTLEN(t)	((t) | 0x3ff)
77 #define	UHCI_TD_BITSTUFF	0x00020000
78 #define	UHCI_TD_CRCTO		0x00040000
79 #define	UHCI_TD_NAK		0x00080000
80 #define	UHCI_TD_BABBLE		0x00100000
81 #define	UHCI_TD_DBUFFER		0x00200000
82 #define	UHCI_TD_STALLED		0x00400000
83 #define	UHCI_TD_ACTIVE		0x00800000
84 #define	UHCI_TD_IOC		0x01000000
85 #define	UHCI_TD_IOS		0x02000000
86 #define	UHCI_TD_LS		0x04000000
87 #define	UHCI_TD_GET_ERRCNT(s)	(((s) >> 27) & 3)
88 #define	UHCI_TD_SET_ERRCNT(n)	((n) << 27)
89 #define	UHCI_TD_SPD		0x20000000
90 	volatile uint32_t td_token;
91 #define	UHCI_TD_PID		0x000000ff
92 #define	UHCI_TD_PID_IN		0x00000069
93 #define	UHCI_TD_PID_OUT		0x000000e1
94 #define	UHCI_TD_PID_SETUP	0x0000002d
95 #define	UHCI_TD_GET_PID(s)	((s) & 0xff)
96 #define	UHCI_TD_SET_DEVADDR(a)	((a) << 8)
97 #define	UHCI_TD_GET_DEVADDR(s)	(((s) >> 8) & 0x7f)
98 #define	UHCI_TD_SET_ENDPT(e)	(((e) & 0xf) << 15)
99 #define	UHCI_TD_GET_ENDPT(s)	(((s) >> 15) & 0xf)
100 #define	UHCI_TD_SET_DT(t)	((t) << 19)
101 #define	UHCI_TD_GET_DT(s)	(((s) >> 19) & 1)
102 #define	UHCI_TD_SET_MAXLEN(l)	(((l)-1U) << 21)
103 #define	UHCI_TD_GET_MAXLEN(s)	((((s) >> 21) + 1) & 0x7ff)
104 #define	UHCI_TD_MAXLEN_MASK	0xffe00000
105 	volatile uint32_t td_buffer;
106 /*
107  * Extra information needed:
108  */
109 	struct uhci_td *next;
110 	struct uhci_td *prev;
111 	struct uhci_td *obj_next;
112 	struct usb_page_cache *page_cache;
113 	struct usb_page_cache *fix_pc;
114 	uint32_t td_self;
115 	uint16_t len;
116 } __aligned(UHCI_TD_ALIGN);
117 
118 typedef struct uhci_td uhci_td_t;
119 
120 #define	UHCI_TD_ERROR	(UHCI_TD_BITSTUFF | UHCI_TD_CRCTO | 		\
121 			UHCI_TD_BABBLE | UHCI_TD_DBUFFER | UHCI_TD_STALLED)
122 
123 #define	UHCI_TD_SETUP(len, endp, dev)	(UHCI_TD_SET_MAXLEN(len) |	\
124 					UHCI_TD_SET_ENDPT(endp) |	\
125 					UHCI_TD_SET_DEVADDR(dev) |	\
126 					UHCI_TD_PID_SETUP)
127 
128 #define	UHCI_TD_OUT(len, endp, dev, dt)	(UHCI_TD_SET_MAXLEN(len) |	\
129 					UHCI_TD_SET_ENDPT(endp) |	\
130 					UHCI_TD_SET_DEVADDR(dev) |	\
131 					UHCI_TD_PID_OUT | UHCI_TD_SET_DT(dt))
132 
133 #define	UHCI_TD_IN(len, endp, dev, dt)	(UHCI_TD_SET_MAXLEN(len) |	\
134 					UHCI_TD_SET_ENDPT(endp) |	\
135 					UHCI_TD_SET_DEVADDR(dev) |	\
136 					UHCI_TD_PID_IN | UHCI_TD_SET_DT(dt))
137 
138 struct uhci_qh {
139 /*
140  * Data used by the UHCI controller.
141  */
142 	volatile uint32_t qh_h_next;
143 	volatile uint32_t qh_e_next;
144 /*
145  * Extra information needed:
146  */
147 	struct uhci_qh *h_next;
148 	struct uhci_qh *h_prev;
149 	struct uhci_qh *obj_next;
150 	struct uhci_td *e_next;
151 	struct usb_page_cache *page_cache;
152 	uint32_t qh_self;
153 	uint16_t intr_pos;
154 } __aligned(UHCI_QH_ALIGN);
155 
156 typedef struct uhci_qh uhci_qh_t;
157 
158 /* Maximum number of isochronous TD's and QH's interrupt */
159 #define	UHCI_VFRAMELIST_COUNT	128
160 #define	UHCI_IFRAMELIST_COUNT	(2 * UHCI_VFRAMELIST_COUNT)
161 
162 #if	(((UHCI_VFRAMELIST_COUNT & (UHCI_VFRAMELIST_COUNT-1)) != 0) ||	\
163 	(UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT))
164 #error	"UHCI_VFRAMELIST_COUNT is not power of two"
165 #error	"or UHCI_VFRAMELIST_COUNT > UHCI_FRAMELIST_COUNT"
166 #endif
167 
168 #if (UHCI_VFRAMELIST_COUNT < USB_MAX_FS_ISOC_FRAMES_PER_XFER)
169 #error "maximum number of full-speed isochronous frames is higher than supported!"
170 #endif
171 
172 struct uhci_config_desc {
173 	struct usb_config_descriptor confd;
174 	struct usb_interface_descriptor ifcd;
175 	struct usb_endpoint_descriptor endpd;
176 } __packed;
177 
178 union uhci_hub_desc {
179 	struct usb_status stat;
180 	struct usb_port_status ps;
181 	uint8_t	temp[128];
182 };
183 
184 struct uhci_hw_softc {
185 	struct usb_page_cache pframes_pc;
186 	struct usb_page_cache isoc_start_pc[UHCI_VFRAMELIST_COUNT];
187 	struct usb_page_cache intr_start_pc[UHCI_IFRAMELIST_COUNT];
188 	struct usb_page_cache ls_ctl_start_pc;
189 	struct usb_page_cache fs_ctl_start_pc;
190 	struct usb_page_cache bulk_start_pc;
191 	struct usb_page_cache last_qh_pc;
192 	struct usb_page_cache last_td_pc;
193 
194 	struct usb_page pframes_pg;
195 	struct usb_page isoc_start_pg[UHCI_VFRAMELIST_COUNT];
196 	struct usb_page intr_start_pg[UHCI_IFRAMELIST_COUNT];
197 	struct usb_page ls_ctl_start_pg;
198 	struct usb_page fs_ctl_start_pg;
199 	struct usb_page bulk_start_pg;
200 	struct usb_page last_qh_pg;
201 	struct usb_page last_td_pg;
202 };
203 
204 typedef struct uhci_softc {
205 	struct uhci_hw_softc sc_hw;
206 	struct usb_bus sc_bus;		/* base device */
207 	union uhci_hub_desc sc_hub_desc;
208 	struct usb_callout sc_root_intr;
209 
210 	struct usb_device *sc_devices[UHCI_MAX_DEVICES];
211 	/* pointer to last TD for isochronous */
212 	struct uhci_td *sc_isoc_p_last[UHCI_VFRAMELIST_COUNT];
213 	/* pointer to last QH for interrupt */
214 	struct uhci_qh *sc_intr_p_last[UHCI_IFRAMELIST_COUNT];
215 	/* pointer to last QH for low speed control */
216 	struct uhci_qh *sc_ls_ctl_p_last;
217 	/* pointer to last QH for full speed control */
218 	struct uhci_qh *sc_fs_ctl_p_last;
219 	/* pointer to last QH for bulk */
220 	struct uhci_qh *sc_bulk_p_last;
221 	struct uhci_qh *sc_reclaim_qh_p;
222 	struct uhci_qh *sc_last_qh_p;
223 	struct uhci_td *sc_last_td_p;
224 	struct resource *sc_io_res;
225 	struct resource *sc_irq_res;
226 	void   *sc_intr_hdl;
227 	device_t sc_dev;
228 	bus_size_t sc_io_size;
229 	bus_space_tag_t sc_io_tag;
230 	bus_space_handle_t sc_io_hdl;
231 
232 	uint32_t sc_loops;		/* number of QHs that wants looping */
233 
234 	uint16_t sc_intr_stat[UHCI_IFRAMELIST_COUNT];
235 
236 	uint8_t	sc_addr;		/* device address */
237 	uint8_t	sc_conf;		/* device configuration */
238 	uint8_t	sc_isreset;		/* bits set if a root hub is reset */
239 	uint8_t	sc_isresumed;		/* bits set if a port was resumed */
240 	uint8_t	sc_hub_idata[1];
241 
242 	char	sc_vendor[16];		/* vendor string for root hub */
243 } uhci_softc_t;
244 
245 usb_bus_mem_cb_t uhci_iterate_hw_softc;
246 
247 usb_error_t uhci_init(uhci_softc_t *sc);
248 void	uhci_reset(uhci_softc_t *sc);
249 void	uhci_interrupt(uhci_softc_t *sc);
250 
251 #endif					/* _UHCI_H_ */
252