1 /*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 /* 35 * USB Open Host Controller driver. 36 * 37 * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf 38 */ 39 40 /* The low level controller code for OHCI has been split into 41 * PCI probes and OHCI specific code. This was done to facilitate the 42 * sharing of code between *BSD's 43 */ 44 45 #include <sys/stdint.h> 46 #include <sys/stddef.h> 47 #include <sys/param.h> 48 #include <sys/queue.h> 49 #include <sys/types.h> 50 #include <sys/systm.h> 51 #include <sys/kernel.h> 52 #include <sys/bus.h> 53 #include <sys/module.h> 54 #include <sys/lock.h> 55 #include <sys/mutex.h> 56 #include <sys/condvar.h> 57 #include <sys/sysctl.h> 58 #include <sys/sx.h> 59 #include <sys/unistd.h> 60 #include <sys/callout.h> 61 #include <sys/malloc.h> 62 #include <sys/priv.h> 63 64 #include <dev/usb/usb.h> 65 #include <dev/usb/usbdi.h> 66 67 #include <dev/usb/usb_core.h> 68 #include <dev/usb/usb_busdma.h> 69 #include <dev/usb/usb_process.h> 70 #include <dev/usb/usb_util.h> 71 72 #include <dev/usb/usb_controller.h> 73 #include <dev/usb/usb_bus.h> 74 #include <dev/usb/usb_pci.h> 75 #include <dev/usb/controller/ohci.h> 76 #include <dev/usb/controller/ohcireg.h> 77 #include "usb_if.h" 78 79 #define PCI_OHCI_VENDORID_ACERLABS 0x10b9 80 #define PCI_OHCI_VENDORID_AMD 0x1022 81 #define PCI_OHCI_VENDORID_APPLE 0x106b 82 #define PCI_OHCI_VENDORID_ATI 0x1002 83 #define PCI_OHCI_VENDORID_CMDTECH 0x1095 84 #define PCI_OHCI_VENDORID_NEC 0x1033 85 #define PCI_OHCI_VENDORID_NVIDIA 0x12D2 86 #define PCI_OHCI_VENDORID_NVIDIA2 0x10DE 87 #define PCI_OHCI_VENDORID_OPTI 0x1045 88 #define PCI_OHCI_VENDORID_SIS 0x1039 89 #define PCI_OHCI_VENDORID_SUN 0x108e 90 91 #define PCI_OHCI_BASE_REG 0x10 92 93 static device_probe_t ohci_pci_probe; 94 static device_attach_t ohci_pci_attach; 95 static device_detach_t ohci_pci_detach; 96 static usb_take_controller_t ohci_pci_take_controller; 97 98 static int 99 ohci_pci_take_controller(device_t self) 100 { 101 uint32_t reg; 102 uint32_t int_line; 103 104 if (pci_get_powerstate(self) != PCI_POWERSTATE_D0) { 105 device_printf(self, "chip is in D%d mode " 106 "-- setting to D0\n", pci_get_powerstate(self)); 107 reg = pci_read_config(self, PCI_CBMEM, 4); 108 int_line = pci_read_config(self, PCIR_INTLINE, 4); 109 pci_set_powerstate(self, PCI_POWERSTATE_D0); 110 pci_write_config(self, PCI_CBMEM, reg, 4); 111 pci_write_config(self, PCIR_INTLINE, int_line, 4); 112 } 113 return (0); 114 } 115 116 static const char * 117 ohci_pci_match(device_t self) 118 { 119 uint32_t device_id = pci_get_devid(self); 120 121 switch (device_id) { 122 case 0x523710b9: 123 return ("AcerLabs M5237 (Aladdin-V) USB controller"); 124 125 case 0x740c1022: 126 return ("AMD-756 USB Controller"); 127 case 0x74141022: 128 return ("AMD-766 USB Controller"); 129 case 0x78071022: 130 return ("AMD FCH USB Controller"); 131 132 case 0x43741002: 133 return "ATI SB400 USB Controller"; 134 case 0x43751002: 135 return "ATI SB400 USB Controller"; 136 case 0x43971002: 137 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 138 case 0x43981002: 139 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 140 case 0x43991002: 141 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 142 143 case 0x06701095: 144 return ("CMD Tech 670 (USB0670) USB controller"); 145 146 case 0x06731095: 147 return ("CMD Tech 673 (USB0673) USB controller"); 148 149 case 0xc8611045: 150 return ("OPTi 82C861 (FireLink) USB controller"); 151 152 case 0x00351033: 153 return ("NEC uPD 9210 USB controller"); 154 155 case 0x00d710de: 156 return ("nVidia nForce3 USB Controller"); 157 158 case 0x005a10de: 159 return ("nVidia nForce CK804 USB Controller"); 160 case 0x036c10de: 161 return ("nVidia nForce MCP55 USB Controller"); 162 case 0x03f110de: 163 return ("nVidia nForce MCP61 USB Controller"); 164 case 0x0aa510de: 165 return ("nVidia nForce MCP79 USB Controller"); 166 case 0x0aa710de: 167 return ("nVidia nForce MCP79 USB Controller"); 168 case 0x0aa810de: 169 return ("nVidia nForce MCP79 USB Controller"); 170 171 case 0x70011039: 172 return ("SiS 5571 USB controller"); 173 174 case 0x1103108e: 175 return "Sun PCIO-2 USB controller"; 176 177 case 0x0019106b: 178 return ("Apple KeyLargo USB controller"); 179 case 0x003f106b: 180 return ("Apple KeyLargo/Intrepid USB controller"); 181 182 default: 183 break; 184 } 185 if ((pci_get_class(self) == PCIC_SERIALBUS) && 186 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 187 (pci_get_progif(self) == PCI_INTERFACE_OHCI)) { 188 return ("OHCI (generic) USB controller"); 189 } 190 return (NULL); 191 } 192 193 static int 194 ohci_pci_probe(device_t self) 195 { 196 const char *desc = ohci_pci_match(self); 197 198 if (desc) { 199 device_set_desc(self, desc); 200 return (0); 201 } else { 202 return (ENXIO); 203 } 204 } 205 206 static int 207 ohci_pci_attach(device_t self) 208 { 209 ohci_softc_t *sc = device_get_softc(self); 210 int rid; 211 int err; 212 213 /* initialise some bus fields */ 214 sc->sc_bus.parent = self; 215 sc->sc_bus.devices = sc->sc_devices; 216 sc->sc_bus.devices_max = OHCI_MAX_DEVICES; 217 sc->sc_bus.dma_bits = 32; 218 219 /* get all DMA memory */ 220 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 221 &ohci_iterate_hw_softc)) { 222 return (ENOMEM); 223 } 224 sc->sc_dev = self; 225 226 pci_enable_busmaster(self); 227 228 /* 229 * Some Sun PCIO-2 USB controllers have their intpin register 230 * bogusly set to 0, although it should be 4. Correct that. 231 */ 232 if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0) 233 pci_set_intpin(self, 4); 234 235 rid = PCI_CBMEM; 236 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 237 RF_ACTIVE); 238 if (!sc->sc_io_res) { 239 device_printf(self, "Could not map memory\n"); 240 goto error; 241 } 242 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 243 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 244 sc->sc_io_size = rman_get_size(sc->sc_io_res); 245 246 rid = 0; 247 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 248 RF_SHAREABLE | RF_ACTIVE); 249 if (sc->sc_irq_res == NULL) { 250 device_printf(self, "Could not allocate irq\n"); 251 goto error; 252 } 253 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 254 if (!sc->sc_bus.bdev) { 255 device_printf(self, "Could not add USB device\n"); 256 goto error; 257 } 258 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 259 260 /* 261 * ohci_pci_match will never return NULL if ohci_pci_probe 262 * succeeded 263 */ 264 device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self)); 265 switch (pci_get_vendor(self)) { 266 case PCI_OHCI_VENDORID_ACERLABS: 267 sprintf(sc->sc_vendor, "AcerLabs"); 268 break; 269 case PCI_OHCI_VENDORID_AMD: 270 sprintf(sc->sc_vendor, "AMD"); 271 break; 272 case PCI_OHCI_VENDORID_APPLE: 273 sprintf(sc->sc_vendor, "Apple"); 274 break; 275 case PCI_OHCI_VENDORID_ATI: 276 sprintf(sc->sc_vendor, "ATI"); 277 break; 278 case PCI_OHCI_VENDORID_CMDTECH: 279 sprintf(sc->sc_vendor, "CMDTECH"); 280 break; 281 case PCI_OHCI_VENDORID_NEC: 282 sprintf(sc->sc_vendor, "NEC"); 283 break; 284 case PCI_OHCI_VENDORID_NVIDIA: 285 case PCI_OHCI_VENDORID_NVIDIA2: 286 sprintf(sc->sc_vendor, "nVidia"); 287 break; 288 case PCI_OHCI_VENDORID_OPTI: 289 sprintf(sc->sc_vendor, "OPTi"); 290 break; 291 case PCI_OHCI_VENDORID_SIS: 292 sprintf(sc->sc_vendor, "SiS"); 293 break; 294 case PCI_OHCI_VENDORID_SUN: 295 sprintf(sc->sc_vendor, "SUN"); 296 break; 297 default: 298 if (bootverbose) { 299 device_printf(self, "(New OHCI DeviceId=0x%08x)\n", 300 pci_get_devid(self)); 301 } 302 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 303 } 304 305 /* sc->sc_bus.usbrev; set by ohci_init() */ 306 307 #if (__FreeBSD_version >= 700031) 308 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 309 NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 310 #else 311 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 312 (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 313 #endif 314 if (err) { 315 device_printf(self, "Could not setup irq, %d\n", err); 316 sc->sc_intr_hdl = NULL; 317 goto error; 318 } 319 err = ohci_init(sc); 320 if (!err) { 321 err = device_probe_and_attach(sc->sc_bus.bdev); 322 } 323 if (err) { 324 device_printf(self, "USB init failed\n"); 325 goto error; 326 } 327 return (0); 328 329 error: 330 ohci_pci_detach(self); 331 return (ENXIO); 332 } 333 334 static int 335 ohci_pci_detach(device_t self) 336 { 337 ohci_softc_t *sc = device_get_softc(self); 338 device_t bdev; 339 340 if (sc->sc_bus.bdev) { 341 bdev = sc->sc_bus.bdev; 342 device_detach(bdev); 343 device_delete_child(self, bdev); 344 } 345 /* during module unload there are lots of children leftover */ 346 device_delete_children(self); 347 348 pci_disable_busmaster(self); 349 350 if (sc->sc_irq_res && sc->sc_intr_hdl) { 351 /* 352 * only call ohci_detach() after ohci_init() 353 */ 354 ohci_detach(sc); 355 356 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 357 358 if (err) { 359 /* XXX or should we panic? */ 360 device_printf(self, "Could not tear down irq, %d\n", 361 err); 362 } 363 sc->sc_intr_hdl = NULL; 364 } 365 if (sc->sc_irq_res) { 366 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 367 sc->sc_irq_res = NULL; 368 } 369 if (sc->sc_io_res) { 370 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 371 sc->sc_io_res); 372 sc->sc_io_res = NULL; 373 } 374 usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); 375 376 return (0); 377 } 378 379 static device_method_t ohci_pci_methods[] = { 380 /* Device interface */ 381 DEVMETHOD(device_probe, ohci_pci_probe), 382 DEVMETHOD(device_attach, ohci_pci_attach), 383 DEVMETHOD(device_detach, ohci_pci_detach), 384 DEVMETHOD(device_suspend, bus_generic_suspend), 385 DEVMETHOD(device_resume, bus_generic_resume), 386 DEVMETHOD(device_shutdown, bus_generic_shutdown), 387 DEVMETHOD(usb_take_controller, ohci_pci_take_controller), 388 389 DEVMETHOD_END 390 }; 391 392 static driver_t ohci_driver = { 393 .name = "ohci", 394 .methods = ohci_pci_methods, 395 .size = sizeof(struct ohci_softc), 396 }; 397 398 static devclass_t ohci_devclass; 399 400 DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, 0, 0); 401 MODULE_DEPEND(ohci, usb, 1, 1, 1); 402