1 /*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 /* 35 * USB Open Host Controller driver. 36 * 37 * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf 38 */ 39 40 /* The low level controller code for OHCI has been split into 41 * PCI probes and OHCI specific code. This was done to facilitate the 42 * sharing of code between *BSD's 43 */ 44 45 #include <sys/stdint.h> 46 #include <sys/stddef.h> 47 #include <sys/param.h> 48 #include <sys/queue.h> 49 #include <sys/types.h> 50 #include <sys/systm.h> 51 #include <sys/kernel.h> 52 #include <sys/bus.h> 53 #include <sys/module.h> 54 #include <sys/lock.h> 55 #include <sys/mutex.h> 56 #include <sys/condvar.h> 57 #include <sys/sysctl.h> 58 #include <sys/sx.h> 59 #include <sys/unistd.h> 60 #include <sys/callout.h> 61 #include <sys/malloc.h> 62 #include <sys/priv.h> 63 64 #include <dev/usb/usb.h> 65 #include <dev/usb/usbdi.h> 66 67 #include <dev/usb/usb_core.h> 68 #include <dev/usb/usb_busdma.h> 69 #include <dev/usb/usb_process.h> 70 #include <dev/usb/usb_util.h> 71 72 #include <dev/usb/usb_controller.h> 73 #include <dev/usb/usb_bus.h> 74 #include <dev/usb/usb_pci.h> 75 #include <dev/usb/controller/ohci.h> 76 #include <dev/usb/controller/ohcireg.h> 77 78 #define PCI_OHCI_VENDORID_ACERLABS 0x10b9 79 #define PCI_OHCI_VENDORID_AMD 0x1022 80 #define PCI_OHCI_VENDORID_APPLE 0x106b 81 #define PCI_OHCI_VENDORID_ATI 0x1002 82 #define PCI_OHCI_VENDORID_CMDTECH 0x1095 83 #define PCI_OHCI_VENDORID_NEC 0x1033 84 #define PCI_OHCI_VENDORID_NVIDIA 0x12D2 85 #define PCI_OHCI_VENDORID_NVIDIA2 0x10DE 86 #define PCI_OHCI_VENDORID_OPTI 0x1045 87 #define PCI_OHCI_VENDORID_SIS 0x1039 88 #define PCI_OHCI_VENDORID_SUN 0x108e 89 90 #define PCI_OHCI_BASE_REG 0x10 91 92 static device_probe_t ohci_pci_probe; 93 static device_attach_t ohci_pci_attach; 94 static device_detach_t ohci_pci_detach; 95 static device_suspend_t ohci_pci_suspend; 96 static device_resume_t ohci_pci_resume; 97 98 static int 99 ohci_pci_suspend(device_t self) 100 { 101 ohci_softc_t *sc = device_get_softc(self); 102 int err; 103 104 err = bus_generic_suspend(self); 105 if (err) { 106 return (err); 107 } 108 ohci_suspend(sc); 109 return (0); 110 } 111 112 static int 113 ohci_pci_resume(device_t self) 114 { 115 ohci_softc_t *sc = device_get_softc(self); 116 uint32_t reg, int_line; 117 118 if (pci_get_powerstate(self) != PCI_POWERSTATE_D0) { 119 device_printf(self, "chip is in D%d mode " 120 "-- setting to D0\n", pci_get_powerstate(self)); 121 reg = pci_read_config(self, PCI_CBMEM, 4); 122 int_line = pci_read_config(self, PCIR_INTLINE, 4); 123 pci_set_powerstate(self, PCI_POWERSTATE_D0); 124 pci_write_config(self, PCI_CBMEM, reg, 4); 125 pci_write_config(self, PCIR_INTLINE, int_line, 4); 126 } 127 ohci_resume(sc); 128 129 bus_generic_resume(self); 130 return (0); 131 } 132 133 static const char * 134 ohci_pci_match(device_t self) 135 { 136 uint32_t device_id = pci_get_devid(self); 137 138 switch (device_id) { 139 case 0x523710b9: 140 return ("AcerLabs M5237 (Aladdin-V) USB controller"); 141 142 case 0x740c1022: 143 return ("AMD-756 USB Controller"); 144 145 case 0x74141022: 146 return ("AMD-766 USB Controller"); 147 148 case 0x43741002: 149 return "ATI SB400 USB Controller"; 150 case 0x43751002: 151 return "ATI SB400 USB Controller"; 152 153 case 0x06701095: 154 return ("CMD Tech 670 (USB0670) USB controller"); 155 156 case 0x06731095: 157 return ("CMD Tech 673 (USB0673) USB controller"); 158 159 case 0xc8611045: 160 return ("OPTi 82C861 (FireLink) USB controller"); 161 162 case 0x00351033: 163 return ("NEC uPD 9210 USB controller"); 164 165 case 0x00d710de: 166 return ("nVidia nForce3 USB Controller"); 167 168 case 0x036c10de: 169 return ("nVidia nForce MCP55 USB Controller"); 170 case 0x03f110de: 171 return ("nVidia nForce MCP61 USB Controller"); 172 case 0x0aa510de: 173 return ("nVidia nForce MCP79 USB Controller"); 174 case 0x0aa710de: 175 return ("nVidia nForce MCP79 USB Controller"); 176 case 0x0aa810de: 177 return ("nVidia nForce MCP79 USB Controller"); 178 179 case 0x70011039: 180 return ("SiS 5571 USB controller"); 181 182 case 0x1103108e: 183 return "Sun PCIO-2 USB controller"; 184 185 case 0x0019106b: 186 return ("Apple KeyLargo USB controller"); 187 188 default: 189 break; 190 } 191 if ((pci_get_class(self) == PCIC_SERIALBUS) && 192 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 193 (pci_get_progif(self) == PCI_INTERFACE_OHCI)) { 194 return ("OHCI (generic) USB controller"); 195 } 196 return (NULL); 197 } 198 199 static int 200 ohci_pci_probe(device_t self) 201 { 202 const char *desc = ohci_pci_match(self); 203 204 if (desc) { 205 device_set_desc(self, desc); 206 return (0); 207 } else { 208 return (ENXIO); 209 } 210 } 211 212 static int 213 ohci_pci_attach(device_t self) 214 { 215 ohci_softc_t *sc = device_get_softc(self); 216 int rid; 217 int err; 218 219 /* initialise some bus fields */ 220 sc->sc_bus.parent = self; 221 sc->sc_bus.devices = sc->sc_devices; 222 sc->sc_bus.devices_max = OHCI_MAX_DEVICES; 223 224 /* get all DMA memory */ 225 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 226 &ohci_iterate_hw_softc)) { 227 return (ENOMEM); 228 } 229 sc->sc_dev = self; 230 231 pci_enable_busmaster(self); 232 233 /* 234 * Some Sun PCIO-2 USB controllers have their intpin register 235 * bogusly set to 0, although it should be 4. Correct that. 236 */ 237 if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0) 238 pci_set_intpin(self, 4); 239 240 rid = PCI_CBMEM; 241 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 242 RF_ACTIVE); 243 if (!sc->sc_io_res) { 244 device_printf(self, "Could not map memory\n"); 245 goto error; 246 } 247 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 248 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 249 sc->sc_io_size = rman_get_size(sc->sc_io_res); 250 251 rid = 0; 252 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 253 RF_SHAREABLE | RF_ACTIVE); 254 if (sc->sc_irq_res == NULL) { 255 device_printf(self, "Could not allocate irq\n"); 256 goto error; 257 } 258 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 259 if (!sc->sc_bus.bdev) { 260 device_printf(self, "Could not add USB device\n"); 261 goto error; 262 } 263 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 264 265 /* 266 * ohci_pci_match will never return NULL if ohci_pci_probe 267 * succeeded 268 */ 269 device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self)); 270 switch (pci_get_vendor(self)) { 271 case PCI_OHCI_VENDORID_ACERLABS: 272 sprintf(sc->sc_vendor, "AcerLabs"); 273 break; 274 case PCI_OHCI_VENDORID_AMD: 275 sprintf(sc->sc_vendor, "AMD"); 276 break; 277 case PCI_OHCI_VENDORID_APPLE: 278 sprintf(sc->sc_vendor, "Apple"); 279 break; 280 case PCI_OHCI_VENDORID_ATI: 281 sprintf(sc->sc_vendor, "ATI"); 282 break; 283 case PCI_OHCI_VENDORID_CMDTECH: 284 sprintf(sc->sc_vendor, "CMDTECH"); 285 break; 286 case PCI_OHCI_VENDORID_NEC: 287 sprintf(sc->sc_vendor, "NEC"); 288 break; 289 case PCI_OHCI_VENDORID_NVIDIA: 290 case PCI_OHCI_VENDORID_NVIDIA2: 291 sprintf(sc->sc_vendor, "nVidia"); 292 break; 293 case PCI_OHCI_VENDORID_OPTI: 294 sprintf(sc->sc_vendor, "OPTi"); 295 break; 296 case PCI_OHCI_VENDORID_SIS: 297 sprintf(sc->sc_vendor, "SiS"); 298 break; 299 case PCI_OHCI_VENDORID_SUN: 300 sprintf(sc->sc_vendor, "SUN"); 301 break; 302 default: 303 if (bootverbose) { 304 device_printf(self, "(New OHCI DeviceId=0x%08x)\n", 305 pci_get_devid(self)); 306 } 307 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 308 } 309 310 /* sc->sc_bus.usbrev; set by ohci_init() */ 311 312 #if (__FreeBSD_version >= 700031) 313 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 314 NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 315 #else 316 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 317 (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 318 #endif 319 if (err) { 320 device_printf(self, "Could not setup irq, %d\n", err); 321 sc->sc_intr_hdl = NULL; 322 goto error; 323 } 324 err = ohci_init(sc); 325 if (!err) { 326 err = device_probe_and_attach(sc->sc_bus.bdev); 327 } 328 if (err) { 329 device_printf(self, "USB init failed\n"); 330 goto error; 331 } 332 return (0); 333 334 error: 335 ohci_pci_detach(self); 336 return (ENXIO); 337 } 338 339 static int 340 ohci_pci_detach(device_t self) 341 { 342 ohci_softc_t *sc = device_get_softc(self); 343 device_t bdev; 344 345 if (sc->sc_bus.bdev) { 346 bdev = sc->sc_bus.bdev; 347 device_detach(bdev); 348 device_delete_child(self, bdev); 349 } 350 /* during module unload there are lots of children leftover */ 351 device_delete_all_children(self); 352 353 pci_disable_busmaster(self); 354 355 if (sc->sc_irq_res && sc->sc_intr_hdl) { 356 /* 357 * only call ohci_detach() after ohci_init() 358 */ 359 ohci_detach(sc); 360 361 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 362 363 if (err) { 364 /* XXX or should we panic? */ 365 device_printf(self, "Could not tear down irq, %d\n", 366 err); 367 } 368 sc->sc_intr_hdl = NULL; 369 } 370 if (sc->sc_irq_res) { 371 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 372 sc->sc_irq_res = NULL; 373 } 374 if (sc->sc_io_res) { 375 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 376 sc->sc_io_res); 377 sc->sc_io_res = NULL; 378 } 379 usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); 380 381 return (0); 382 } 383 384 static driver_t ohci_driver = 385 { 386 .name = "ohci", 387 .methods = (device_method_t[]){ 388 /* device interface */ 389 DEVMETHOD(device_probe, ohci_pci_probe), 390 DEVMETHOD(device_attach, ohci_pci_attach), 391 DEVMETHOD(device_detach, ohci_pci_detach), 392 DEVMETHOD(device_suspend, ohci_pci_suspend), 393 DEVMETHOD(device_resume, ohci_pci_resume), 394 DEVMETHOD(device_shutdown, bus_generic_shutdown), 395 396 /* bus interface */ 397 DEVMETHOD(bus_print_child, bus_generic_print_child), 398 399 {0, 0} 400 }, 401 .size = sizeof(struct ohci_softc), 402 }; 403 404 static devclass_t ohci_devclass; 405 406 DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, 0, 0); 407 MODULE_DEPEND(ohci, usb, 1, 1, 1); 408