1 /*- 2 * Copyright (c) 1998 The NetBSD Foundation, Inc. 3 * All rights reserved. 4 * 5 * This code is derived from software contributed to The NetBSD Foundation 6 * by Lennart Augustsson (augustss@carlstedt.se) at 7 * Carlstedt Research & Technology. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 18 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 19 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 20 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 21 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 22 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 23 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 24 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 25 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 26 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 28 * POSSIBILITY OF SUCH DAMAGE. 29 */ 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 /* 35 * USB Open Host Controller driver. 36 * 37 * OHCI spec: http://www.intel.com/design/usb/ohci11d.pdf 38 */ 39 40 /* The low level controller code for OHCI has been split into 41 * PCI probes and OHCI specific code. This was done to facilitate the 42 * sharing of code between *BSD's 43 */ 44 45 #include <sys/stdint.h> 46 #include <sys/stddef.h> 47 #include <sys/param.h> 48 #include <sys/queue.h> 49 #include <sys/types.h> 50 #include <sys/systm.h> 51 #include <sys/kernel.h> 52 #include <sys/bus.h> 53 #include <sys/module.h> 54 #include <sys/lock.h> 55 #include <sys/mutex.h> 56 #include <sys/condvar.h> 57 #include <sys/sysctl.h> 58 #include <sys/sx.h> 59 #include <sys/unistd.h> 60 #include <sys/callout.h> 61 #include <sys/malloc.h> 62 #include <sys/priv.h> 63 64 #include <dev/usb/usb.h> 65 #include <dev/usb/usbdi.h> 66 67 #include <dev/usb/usb_core.h> 68 #include <dev/usb/usb_busdma.h> 69 #include <dev/usb/usb_process.h> 70 #include <dev/usb/usb_util.h> 71 72 #include <dev/usb/usb_controller.h> 73 #include <dev/usb/usb_bus.h> 74 #include <dev/usb/usb_pci.h> 75 #include <dev/usb/controller/ohci.h> 76 #include <dev/usb/controller/ohcireg.h> 77 #include "usb_if.h" 78 79 #define PCI_OHCI_VENDORID_ACERLABS 0x10b9 80 #define PCI_OHCI_VENDORID_AMD 0x1022 81 #define PCI_OHCI_VENDORID_APPLE 0x106b 82 #define PCI_OHCI_VENDORID_ATI 0x1002 83 #define PCI_OHCI_VENDORID_CMDTECH 0x1095 84 #define PCI_OHCI_VENDORID_NEC 0x1033 85 #define PCI_OHCI_VENDORID_NVIDIA 0x12D2 86 #define PCI_OHCI_VENDORID_NVIDIA2 0x10DE 87 #define PCI_OHCI_VENDORID_OPTI 0x1045 88 #define PCI_OHCI_VENDORID_SIS 0x1039 89 #define PCI_OHCI_VENDORID_SUN 0x108e 90 91 #define PCI_OHCI_BASE_REG 0x10 92 93 static device_probe_t ohci_pci_probe; 94 static device_attach_t ohci_pci_attach; 95 static device_detach_t ohci_pci_detach; 96 static usb_take_controller_t ohci_pci_take_controller; 97 98 static int 99 ohci_pci_take_controller(device_t self) 100 { 101 uint32_t reg; 102 uint32_t int_line; 103 104 if (pci_get_powerstate(self) != PCI_POWERSTATE_D0) { 105 device_printf(self, "chip is in D%d mode " 106 "-- setting to D0\n", pci_get_powerstate(self)); 107 reg = pci_read_config(self, PCI_CBMEM, 4); 108 int_line = pci_read_config(self, PCIR_INTLINE, 4); 109 pci_set_powerstate(self, PCI_POWERSTATE_D0); 110 pci_write_config(self, PCI_CBMEM, reg, 4); 111 pci_write_config(self, PCIR_INTLINE, int_line, 4); 112 } 113 return (0); 114 } 115 116 static const char * 117 ohci_pci_match(device_t self) 118 { 119 uint32_t device_id = pci_get_devid(self); 120 121 switch (device_id) { 122 case 0x523710b9: 123 return ("AcerLabs M5237 (Aladdin-V) USB controller"); 124 125 case 0x740c1022: 126 return ("AMD-756 USB Controller"); 127 128 case 0x74141022: 129 return ("AMD-766 USB Controller"); 130 131 case 0x43741002: 132 return "ATI SB400 USB Controller"; 133 case 0x43751002: 134 return "ATI SB400 USB Controller"; 135 case 0x43971002: 136 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 137 case 0x43981002: 138 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 139 case 0x43991002: 140 return ("AMD SB7x0/SB8x0/SB9x0 USB controller"); 141 142 case 0x06701095: 143 return ("CMD Tech 670 (USB0670) USB controller"); 144 145 case 0x06731095: 146 return ("CMD Tech 673 (USB0673) USB controller"); 147 148 case 0xc8611045: 149 return ("OPTi 82C861 (FireLink) USB controller"); 150 151 case 0x00351033: 152 return ("NEC uPD 9210 USB controller"); 153 154 case 0x00d710de: 155 return ("nVidia nForce3 USB Controller"); 156 157 case 0x036c10de: 158 return ("nVidia nForce MCP55 USB Controller"); 159 case 0x03f110de: 160 return ("nVidia nForce MCP61 USB Controller"); 161 case 0x0aa510de: 162 return ("nVidia nForce MCP79 USB Controller"); 163 case 0x0aa710de: 164 return ("nVidia nForce MCP79 USB Controller"); 165 case 0x0aa810de: 166 return ("nVidia nForce MCP79 USB Controller"); 167 168 case 0x70011039: 169 return ("SiS 5571 USB controller"); 170 171 case 0x1103108e: 172 return "Sun PCIO-2 USB controller"; 173 174 case 0x0019106b: 175 return ("Apple KeyLargo USB controller"); 176 177 default: 178 break; 179 } 180 if ((pci_get_class(self) == PCIC_SERIALBUS) && 181 (pci_get_subclass(self) == PCIS_SERIALBUS_USB) && 182 (pci_get_progif(self) == PCI_INTERFACE_OHCI)) { 183 return ("OHCI (generic) USB controller"); 184 } 185 return (NULL); 186 } 187 188 static int 189 ohci_pci_probe(device_t self) 190 { 191 const char *desc = ohci_pci_match(self); 192 193 if (desc) { 194 device_set_desc(self, desc); 195 return (0); 196 } else { 197 return (ENXIO); 198 } 199 } 200 201 static int 202 ohci_pci_attach(device_t self) 203 { 204 ohci_softc_t *sc = device_get_softc(self); 205 int rid; 206 int err; 207 208 /* initialise some bus fields */ 209 sc->sc_bus.parent = self; 210 sc->sc_bus.devices = sc->sc_devices; 211 sc->sc_bus.devices_max = OHCI_MAX_DEVICES; 212 213 /* get all DMA memory */ 214 if (usb_bus_mem_alloc_all(&sc->sc_bus, USB_GET_DMA_TAG(self), 215 &ohci_iterate_hw_softc)) { 216 return (ENOMEM); 217 } 218 sc->sc_dev = self; 219 220 pci_enable_busmaster(self); 221 222 /* 223 * Some Sun PCIO-2 USB controllers have their intpin register 224 * bogusly set to 0, although it should be 4. Correct that. 225 */ 226 if (pci_get_devid(self) == 0x1103108e && pci_get_intpin(self) == 0) 227 pci_set_intpin(self, 4); 228 229 rid = PCI_CBMEM; 230 sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, 231 RF_ACTIVE); 232 if (!sc->sc_io_res) { 233 device_printf(self, "Could not map memory\n"); 234 goto error; 235 } 236 sc->sc_io_tag = rman_get_bustag(sc->sc_io_res); 237 sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res); 238 sc->sc_io_size = rman_get_size(sc->sc_io_res); 239 240 rid = 0; 241 sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid, 242 RF_SHAREABLE | RF_ACTIVE); 243 if (sc->sc_irq_res == NULL) { 244 device_printf(self, "Could not allocate irq\n"); 245 goto error; 246 } 247 sc->sc_bus.bdev = device_add_child(self, "usbus", -1); 248 if (!sc->sc_bus.bdev) { 249 device_printf(self, "Could not add USB device\n"); 250 goto error; 251 } 252 device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus); 253 254 /* 255 * ohci_pci_match will never return NULL if ohci_pci_probe 256 * succeeded 257 */ 258 device_set_desc(sc->sc_bus.bdev, ohci_pci_match(self)); 259 switch (pci_get_vendor(self)) { 260 case PCI_OHCI_VENDORID_ACERLABS: 261 sprintf(sc->sc_vendor, "AcerLabs"); 262 break; 263 case PCI_OHCI_VENDORID_AMD: 264 sprintf(sc->sc_vendor, "AMD"); 265 break; 266 case PCI_OHCI_VENDORID_APPLE: 267 sprintf(sc->sc_vendor, "Apple"); 268 break; 269 case PCI_OHCI_VENDORID_ATI: 270 sprintf(sc->sc_vendor, "ATI"); 271 break; 272 case PCI_OHCI_VENDORID_CMDTECH: 273 sprintf(sc->sc_vendor, "CMDTECH"); 274 break; 275 case PCI_OHCI_VENDORID_NEC: 276 sprintf(sc->sc_vendor, "NEC"); 277 break; 278 case PCI_OHCI_VENDORID_NVIDIA: 279 case PCI_OHCI_VENDORID_NVIDIA2: 280 sprintf(sc->sc_vendor, "nVidia"); 281 break; 282 case PCI_OHCI_VENDORID_OPTI: 283 sprintf(sc->sc_vendor, "OPTi"); 284 break; 285 case PCI_OHCI_VENDORID_SIS: 286 sprintf(sc->sc_vendor, "SiS"); 287 break; 288 case PCI_OHCI_VENDORID_SUN: 289 sprintf(sc->sc_vendor, "SUN"); 290 break; 291 default: 292 if (bootverbose) { 293 device_printf(self, "(New OHCI DeviceId=0x%08x)\n", 294 pci_get_devid(self)); 295 } 296 sprintf(sc->sc_vendor, "(0x%04x)", pci_get_vendor(self)); 297 } 298 299 /* sc->sc_bus.usbrev; set by ohci_init() */ 300 301 #if (__FreeBSD_version >= 700031) 302 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 303 NULL, (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 304 #else 305 err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE, 306 (driver_intr_t *)ohci_interrupt, sc, &sc->sc_intr_hdl); 307 #endif 308 if (err) { 309 device_printf(self, "Could not setup irq, %d\n", err); 310 sc->sc_intr_hdl = NULL; 311 goto error; 312 } 313 err = ohci_init(sc); 314 if (!err) { 315 err = device_probe_and_attach(sc->sc_bus.bdev); 316 } 317 if (err) { 318 device_printf(self, "USB init failed\n"); 319 goto error; 320 } 321 return (0); 322 323 error: 324 ohci_pci_detach(self); 325 return (ENXIO); 326 } 327 328 static int 329 ohci_pci_detach(device_t self) 330 { 331 ohci_softc_t *sc = device_get_softc(self); 332 device_t bdev; 333 334 if (sc->sc_bus.bdev) { 335 bdev = sc->sc_bus.bdev; 336 device_detach(bdev); 337 device_delete_child(self, bdev); 338 } 339 /* during module unload there are lots of children leftover */ 340 device_delete_children(self); 341 342 pci_disable_busmaster(self); 343 344 if (sc->sc_irq_res && sc->sc_intr_hdl) { 345 /* 346 * only call ohci_detach() after ohci_init() 347 */ 348 ohci_detach(sc); 349 350 int err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl); 351 352 if (err) { 353 /* XXX or should we panic? */ 354 device_printf(self, "Could not tear down irq, %d\n", 355 err); 356 } 357 sc->sc_intr_hdl = NULL; 358 } 359 if (sc->sc_irq_res) { 360 bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res); 361 sc->sc_irq_res = NULL; 362 } 363 if (sc->sc_io_res) { 364 bus_release_resource(self, SYS_RES_MEMORY, PCI_CBMEM, 365 sc->sc_io_res); 366 sc->sc_io_res = NULL; 367 } 368 usb_bus_mem_free_all(&sc->sc_bus, &ohci_iterate_hw_softc); 369 370 return (0); 371 } 372 373 static device_method_t ohci_pci_methods[] = { 374 /* Device interface */ 375 DEVMETHOD(device_probe, ohci_pci_probe), 376 DEVMETHOD(device_attach, ohci_pci_attach), 377 DEVMETHOD(device_detach, ohci_pci_detach), 378 DEVMETHOD(device_suspend, bus_generic_suspend), 379 DEVMETHOD(device_resume, bus_generic_resume), 380 DEVMETHOD(device_shutdown, bus_generic_shutdown), 381 DEVMETHOD(usb_take_controller, ohci_pci_take_controller), 382 383 DEVMETHOD_END 384 }; 385 386 static driver_t ohci_driver = { 387 .name = "ohci", 388 .methods = ohci_pci_methods, 389 .size = sizeof(struct ohci_softc), 390 }; 391 392 static devclass_t ohci_devclass; 393 394 DRIVER_MODULE(ohci, pci, ohci_driver, ohci_devclass, 0, 0); 395 MODULE_DEPEND(ohci, usb, 1, 1, 1); 396