1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 5 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * USB Open Host Controller driver. 31 * 32 * OHCI spec: http://www.compaq.com/productinfo/development/openhci.html 33 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 34 */ 35 36 #ifdef USB_GLOBAL_INCLUDE_FILE 37 #include USB_GLOBAL_INCLUDE_FILE 38 #else 39 #include <sys/stdint.h> 40 #include <sys/stddef.h> 41 #include <sys/param.h> 42 #include <sys/queue.h> 43 #include <sys/types.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/bus.h> 47 #include <sys/module.h> 48 #include <sys/lock.h> 49 #include <sys/mutex.h> 50 #include <sys/condvar.h> 51 #include <sys/sysctl.h> 52 #include <sys/sx.h> 53 #include <sys/unistd.h> 54 #include <sys/callout.h> 55 #include <sys/malloc.h> 56 #include <sys/priv.h> 57 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbdi.h> 60 61 #define USB_DEBUG_VAR ohcidebug 62 63 #include <dev/usb/usb_core.h> 64 #include <dev/usb/usb_debug.h> 65 #include <dev/usb/usb_busdma.h> 66 #include <dev/usb/usb_process.h> 67 #include <dev/usb/usb_transfer.h> 68 #include <dev/usb/usb_device.h> 69 #include <dev/usb/usb_hub.h> 70 #include <dev/usb/usb_util.h> 71 72 #include <dev/usb/usb_controller.h> 73 #include <dev/usb/usb_bus.h> 74 #endif /* USB_GLOBAL_INCLUDE_FILE */ 75 76 #include <dev/usb/controller/ohci.h> 77 #include <dev/usb/controller/ohcireg.h> 78 79 #define OHCI_BUS2SC(bus) \ 80 ((ohci_softc_t *)(((uint8_t *)(bus)) - \ 81 ((uint8_t *)&(((ohci_softc_t *)0)->sc_bus)))) 82 83 #ifdef USB_DEBUG 84 static int ohcidebug = 0; 85 86 static SYSCTL_NODE(_hw_usb, OID_AUTO, ohci, CTLFLAG_RW, 0, "USB ohci"); 87 SYSCTL_INT(_hw_usb_ohci, OID_AUTO, debug, CTLFLAG_RWTUN, 88 &ohcidebug, 0, "ohci debug level"); 89 90 static void ohci_dumpregs(ohci_softc_t *); 91 static void ohci_dump_tds(ohci_td_t *); 92 static uint8_t ohci_dump_td(ohci_td_t *); 93 static void ohci_dump_ed(ohci_ed_t *); 94 static uint8_t ohci_dump_itd(ohci_itd_t *); 95 static void ohci_dump_itds(ohci_itd_t *); 96 97 #endif 98 99 #define OBARR(sc) bus_space_barrier((sc)->sc_io_tag, (sc)->sc_io_hdl, 0, (sc)->sc_io_size, \ 100 BUS_SPACE_BARRIER_READ|BUS_SPACE_BARRIER_WRITE) 101 #define OWRITE1(sc, r, x) \ 102 do { OBARR(sc); bus_space_write_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) 103 #define OWRITE2(sc, r, x) \ 104 do { OBARR(sc); bus_space_write_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) 105 #define OWRITE4(sc, r, x) \ 106 do { OBARR(sc); bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r), (x)); } while (0) 107 #define OREAD1(sc, r) (OBARR(sc), bus_space_read_1((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 108 #define OREAD2(sc, r) (OBARR(sc), bus_space_read_2((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 109 #define OREAD4(sc, r) (OBARR(sc), bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, (r))) 110 111 #define OHCI_INTR_ENDPT 1 112 113 static const struct usb_bus_methods ohci_bus_methods; 114 static const struct usb_pipe_methods ohci_device_bulk_methods; 115 static const struct usb_pipe_methods ohci_device_ctrl_methods; 116 static const struct usb_pipe_methods ohci_device_intr_methods; 117 static const struct usb_pipe_methods ohci_device_isoc_methods; 118 119 static void ohci_do_poll(struct usb_bus *bus); 120 static void ohci_device_done(struct usb_xfer *xfer, usb_error_t error); 121 static void ohci_timeout(void *arg); 122 static uint8_t ohci_check_transfer(struct usb_xfer *xfer); 123 static void ohci_root_intr(ohci_softc_t *sc); 124 125 struct ohci_std_temp { 126 struct usb_page_cache *pc; 127 ohci_td_t *td; 128 ohci_td_t *td_next; 129 uint32_t average; 130 uint32_t td_flags; 131 uint32_t len; 132 uint16_t max_frame_size; 133 uint8_t shortpkt; 134 uint8_t setup_alt_next; 135 uint8_t last_frame; 136 }; 137 138 static struct ohci_hcca * 139 ohci_get_hcca(ohci_softc_t *sc) 140 { 141 usb_pc_cpu_invalidate(&sc->sc_hw.hcca_pc); 142 return (sc->sc_hcca_p); 143 } 144 145 void 146 ohci_iterate_hw_softc(struct usb_bus *bus, usb_bus_mem_sub_cb_t *cb) 147 { 148 struct ohci_softc *sc = OHCI_BUS2SC(bus); 149 uint32_t i; 150 151 cb(bus, &sc->sc_hw.hcca_pc, &sc->sc_hw.hcca_pg, 152 sizeof(ohci_hcca_t), OHCI_HCCA_ALIGN); 153 154 cb(bus, &sc->sc_hw.ctrl_start_pc, &sc->sc_hw.ctrl_start_pg, 155 sizeof(ohci_ed_t), OHCI_ED_ALIGN); 156 157 cb(bus, &sc->sc_hw.bulk_start_pc, &sc->sc_hw.bulk_start_pg, 158 sizeof(ohci_ed_t), OHCI_ED_ALIGN); 159 160 cb(bus, &sc->sc_hw.isoc_start_pc, &sc->sc_hw.isoc_start_pg, 161 sizeof(ohci_ed_t), OHCI_ED_ALIGN); 162 163 for (i = 0; i != OHCI_NO_EDS; i++) { 164 cb(bus, sc->sc_hw.intr_start_pc + i, sc->sc_hw.intr_start_pg + i, 165 sizeof(ohci_ed_t), OHCI_ED_ALIGN); 166 } 167 } 168 169 static usb_error_t 170 ohci_controller_init(ohci_softc_t *sc, int do_suspend) 171 { 172 struct usb_page_search buf_res; 173 uint32_t i; 174 uint32_t ctl; 175 uint32_t ival; 176 uint32_t hcr; 177 uint32_t fm; 178 uint32_t per; 179 uint32_t desca; 180 181 /* Determine in what context we are running. */ 182 ctl = OREAD4(sc, OHCI_CONTROL); 183 if (ctl & OHCI_IR) { 184 /* SMM active, request change */ 185 DPRINTF("SMM active, request owner change\n"); 186 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_OCR); 187 for (i = 0; (i < 100) && (ctl & OHCI_IR); i++) { 188 usb_pause_mtx(NULL, hz / 1000); 189 ctl = OREAD4(sc, OHCI_CONTROL); 190 } 191 if (ctl & OHCI_IR) { 192 device_printf(sc->sc_bus.bdev, 193 "SMM does not respond, resetting\n"); 194 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 195 goto reset; 196 } 197 } else { 198 DPRINTF("cold started\n"); 199 reset: 200 /* controller was cold started */ 201 usb_pause_mtx(NULL, 202 USB_MS_TO_TICKS(USB_BUS_RESET_DELAY)); 203 } 204 205 /* 206 * This reset should not be necessary according to the OHCI spec, but 207 * without it some controllers do not start. 208 */ 209 DPRINTF("%s: resetting\n", device_get_nameunit(sc->sc_bus.bdev)); 210 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 211 212 usb_pause_mtx(NULL, 213 USB_MS_TO_TICKS(USB_BUS_RESET_DELAY)); 214 215 /* we now own the host controller and the bus has been reset */ 216 ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL)); 217 218 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */ 219 /* nominal time for a reset is 10 us */ 220 for (i = 0; i < 10; i++) { 221 DELAY(10); 222 hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR; 223 if (!hcr) { 224 break; 225 } 226 } 227 if (hcr) { 228 device_printf(sc->sc_bus.bdev, "reset timeout\n"); 229 return (USB_ERR_IOERROR); 230 } 231 #ifdef USB_DEBUG 232 if (ohcidebug > 15) { 233 ohci_dumpregs(sc); 234 } 235 #endif 236 237 if (do_suspend) { 238 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_SUSPEND); 239 return (USB_ERR_NORMAL_COMPLETION); 240 } 241 242 /* The controller is now in SUSPEND state, we have 2ms to finish. */ 243 244 /* set up HC registers */ 245 usbd_get_page(&sc->sc_hw.hcca_pc, 0, &buf_res); 246 OWRITE4(sc, OHCI_HCCA, buf_res.physaddr); 247 248 usbd_get_page(&sc->sc_hw.ctrl_start_pc, 0, &buf_res); 249 OWRITE4(sc, OHCI_CONTROL_HEAD_ED, buf_res.physaddr); 250 251 usbd_get_page(&sc->sc_hw.bulk_start_pc, 0, &buf_res); 252 OWRITE4(sc, OHCI_BULK_HEAD_ED, buf_res.physaddr); 253 254 /* disable all interrupts and then switch on all desired interrupts */ 255 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); 256 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE); 257 /* switch on desired functional features */ 258 ctl = OREAD4(sc, OHCI_CONTROL); 259 ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR); 260 ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE | 261 OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL; 262 /* And finally start it! */ 263 OWRITE4(sc, OHCI_CONTROL, ctl); 264 265 /* 266 * The controller is now OPERATIONAL. Set a some final 267 * registers that should be set earlier, but that the 268 * controller ignores when in the SUSPEND state. 269 */ 270 fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT; 271 fm |= OHCI_FSMPS(ival) | ival; 272 OWRITE4(sc, OHCI_FM_INTERVAL, fm); 273 per = OHCI_PERIODIC(ival); /* 90% periodic */ 274 OWRITE4(sc, OHCI_PERIODIC_START, per); 275 276 /* Fiddle the No OverCurrent Protection bit to avoid chip bug. */ 277 desca = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 278 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca | OHCI_NOCP); 279 OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */ 280 usb_pause_mtx(NULL, 281 USB_MS_TO_TICKS(OHCI_ENABLE_POWER_DELAY)); 282 OWRITE4(sc, OHCI_RH_DESCRIPTOR_A, desca); 283 284 /* 285 * The AMD756 requires a delay before re-reading the register, 286 * otherwise it will occasionally report 0 ports. 287 */ 288 sc->sc_noport = 0; 289 for (i = 0; (i < 10) && (sc->sc_noport == 0); i++) { 290 usb_pause_mtx(NULL, 291 USB_MS_TO_TICKS(OHCI_READ_DESC_DELAY)); 292 sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A)); 293 } 294 295 #ifdef USB_DEBUG 296 if (ohcidebug > 5) { 297 ohci_dumpregs(sc); 298 } 299 #endif 300 return (USB_ERR_NORMAL_COMPLETION); 301 } 302 303 static struct ohci_ed * 304 ohci_init_ed(struct usb_page_cache *pc) 305 { 306 struct usb_page_search buf_res; 307 struct ohci_ed *ed; 308 309 usbd_get_page(pc, 0, &buf_res); 310 311 ed = buf_res.buffer; 312 313 ed->ed_self = htole32(buf_res.physaddr); 314 ed->ed_flags = htole32(OHCI_ED_SKIP); 315 ed->page_cache = pc; 316 317 return (ed); 318 } 319 320 usb_error_t 321 ohci_init(ohci_softc_t *sc) 322 { 323 struct usb_page_search buf_res; 324 uint16_t i; 325 uint16_t bit; 326 uint16_t x; 327 uint16_t y; 328 329 DPRINTF("start\n"); 330 331 sc->sc_eintrs = OHCI_NORMAL_INTRS; 332 333 /* 334 * Setup all ED's 335 */ 336 337 sc->sc_ctrl_p_last = 338 ohci_init_ed(&sc->sc_hw.ctrl_start_pc); 339 340 sc->sc_bulk_p_last = 341 ohci_init_ed(&sc->sc_hw.bulk_start_pc); 342 343 sc->sc_isoc_p_last = 344 ohci_init_ed(&sc->sc_hw.isoc_start_pc); 345 346 for (i = 0; i != OHCI_NO_EDS; i++) { 347 sc->sc_intr_p_last[i] = 348 ohci_init_ed(sc->sc_hw.intr_start_pc + i); 349 } 350 351 /* 352 * the QHs are arranged to give poll intervals that are 353 * powers of 2 times 1ms 354 */ 355 bit = OHCI_NO_EDS / 2; 356 while (bit) { 357 x = bit; 358 while (x & bit) { 359 ohci_ed_t *ed_x; 360 ohci_ed_t *ed_y; 361 362 y = (x ^ bit) | (bit / 2); 363 364 /* 365 * the next QH has half the poll interval 366 */ 367 ed_x = sc->sc_intr_p_last[x]; 368 ed_y = sc->sc_intr_p_last[y]; 369 370 ed_x->next = NULL; 371 ed_x->ed_next = ed_y->ed_self; 372 373 x++; 374 } 375 bit >>= 1; 376 } 377 378 if (1) { 379 380 ohci_ed_t *ed_int; 381 ohci_ed_t *ed_isc; 382 383 ed_int = sc->sc_intr_p_last[0]; 384 ed_isc = sc->sc_isoc_p_last; 385 386 /* the last (1ms) QH */ 387 ed_int->next = ed_isc; 388 ed_int->ed_next = ed_isc->ed_self; 389 } 390 usbd_get_page(&sc->sc_hw.hcca_pc, 0, &buf_res); 391 392 sc->sc_hcca_p = buf_res.buffer; 393 394 /* 395 * Fill HCCA interrupt table. The bit reversal is to get 396 * the tree set up properly to spread the interrupts. 397 */ 398 for (i = 0; i != OHCI_NO_INTRS; i++) { 399 sc->sc_hcca_p->hcca_interrupt_table[i] = 400 sc->sc_intr_p_last[i | (OHCI_NO_EDS / 2)]->ed_self; 401 } 402 /* flush all cache into memory */ 403 404 usb_bus_mem_flush_all(&sc->sc_bus, &ohci_iterate_hw_softc); 405 406 /* set up the bus struct */ 407 sc->sc_bus.methods = &ohci_bus_methods; 408 409 usb_callout_init_mtx(&sc->sc_tmo_rhsc, &sc->sc_bus.bus_mtx, 0); 410 411 #ifdef USB_DEBUG 412 if (ohcidebug > 15) { 413 for (i = 0; i != OHCI_NO_EDS; i++) { 414 printf("ed#%d ", i); 415 ohci_dump_ed(sc->sc_intr_p_last[i]); 416 } 417 printf("iso "); 418 ohci_dump_ed(sc->sc_isoc_p_last); 419 } 420 #endif 421 422 sc->sc_bus.usbrev = USB_REV_1_0; 423 424 if (ohci_controller_init(sc, 0) != 0) 425 return (USB_ERR_INVAL); 426 427 /* catch any lost interrupts */ 428 ohci_do_poll(&sc->sc_bus); 429 return (USB_ERR_NORMAL_COMPLETION); 430 } 431 432 /* 433 * shut down the controller when the system is going down 434 */ 435 void 436 ohci_detach(struct ohci_softc *sc) 437 { 438 USB_BUS_LOCK(&sc->sc_bus); 439 440 usb_callout_stop(&sc->sc_tmo_rhsc); 441 442 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS); 443 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 444 445 USB_BUS_UNLOCK(&sc->sc_bus); 446 447 /* XXX let stray task complete */ 448 usb_pause_mtx(NULL, hz / 20); 449 450 usb_callout_drain(&sc->sc_tmo_rhsc); 451 } 452 453 static void 454 ohci_suspend(ohci_softc_t *sc) 455 { 456 DPRINTF("\n"); 457 458 #ifdef USB_DEBUG 459 if (ohcidebug > 2) 460 ohci_dumpregs(sc); 461 #endif 462 463 /* reset HC and leave it suspended */ 464 ohci_controller_init(sc, 1); 465 } 466 467 static void 468 ohci_resume(ohci_softc_t *sc) 469 { 470 DPRINTF("\n"); 471 472 #ifdef USB_DEBUG 473 if (ohcidebug > 2) 474 ohci_dumpregs(sc); 475 #endif 476 477 /* some broken BIOSes never initialize the Controller chip */ 478 ohci_controller_init(sc, 0); 479 480 /* catch any lost interrupts */ 481 ohci_do_poll(&sc->sc_bus); 482 } 483 484 #ifdef USB_DEBUG 485 static void 486 ohci_dumpregs(ohci_softc_t *sc) 487 { 488 struct ohci_hcca *hcca; 489 490 DPRINTF("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n", 491 OREAD4(sc, OHCI_REVISION), 492 OREAD4(sc, OHCI_CONTROL), 493 OREAD4(sc, OHCI_COMMAND_STATUS)); 494 DPRINTF(" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n", 495 OREAD4(sc, OHCI_INTERRUPT_STATUS), 496 OREAD4(sc, OHCI_INTERRUPT_ENABLE), 497 OREAD4(sc, OHCI_INTERRUPT_DISABLE)); 498 DPRINTF(" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n", 499 OREAD4(sc, OHCI_HCCA), 500 OREAD4(sc, OHCI_PERIOD_CURRENT_ED), 501 OREAD4(sc, OHCI_CONTROL_HEAD_ED)); 502 DPRINTF(" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n", 503 OREAD4(sc, OHCI_CONTROL_CURRENT_ED), 504 OREAD4(sc, OHCI_BULK_HEAD_ED), 505 OREAD4(sc, OHCI_BULK_CURRENT_ED)); 506 DPRINTF(" done=0x%08x fmival=0x%08x fmrem=0x%08x\n", 507 OREAD4(sc, OHCI_DONE_HEAD), 508 OREAD4(sc, OHCI_FM_INTERVAL), 509 OREAD4(sc, OHCI_FM_REMAINING)); 510 DPRINTF(" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n", 511 OREAD4(sc, OHCI_FM_NUMBER), 512 OREAD4(sc, OHCI_PERIODIC_START), 513 OREAD4(sc, OHCI_LS_THRESHOLD)); 514 DPRINTF(" desca=0x%08x descb=0x%08x stat=0x%08x\n", 515 OREAD4(sc, OHCI_RH_DESCRIPTOR_A), 516 OREAD4(sc, OHCI_RH_DESCRIPTOR_B), 517 OREAD4(sc, OHCI_RH_STATUS)); 518 DPRINTF(" port1=0x%08x port2=0x%08x\n", 519 OREAD4(sc, OHCI_RH_PORT_STATUS(1)), 520 OREAD4(sc, OHCI_RH_PORT_STATUS(2))); 521 522 hcca = ohci_get_hcca(sc); 523 524 DPRINTF(" HCCA: frame_number=0x%04x done_head=0x%08x\n", 525 le32toh(hcca->hcca_frame_number), 526 le32toh(hcca->hcca_done_head)); 527 } 528 static void 529 ohci_dump_tds(ohci_td_t *std) 530 { 531 for (; std; std = std->obj_next) { 532 if (ohci_dump_td(std)) { 533 break; 534 } 535 } 536 } 537 538 static uint8_t 539 ohci_dump_td(ohci_td_t *std) 540 { 541 uint32_t td_flags; 542 uint8_t temp; 543 544 usb_pc_cpu_invalidate(std->page_cache); 545 546 td_flags = le32toh(std->td_flags); 547 temp = (std->td_next == 0); 548 549 printf("TD(%p) at 0x%08x: %s%s%s%s%s delay=%d ec=%d " 550 "cc=%d\ncbp=0x%08x next=0x%08x be=0x%08x\n", 551 std, le32toh(std->td_self), 552 (td_flags & OHCI_TD_R) ? "-R" : "", 553 (td_flags & OHCI_TD_OUT) ? "-OUT" : "", 554 (td_flags & OHCI_TD_IN) ? "-IN" : "", 555 ((td_flags & OHCI_TD_TOGGLE_MASK) == OHCI_TD_TOGGLE_1) ? "-TOG1" : "", 556 ((td_flags & OHCI_TD_TOGGLE_MASK) == OHCI_TD_TOGGLE_0) ? "-TOG0" : "", 557 OHCI_TD_GET_DI(td_flags), 558 OHCI_TD_GET_EC(td_flags), 559 OHCI_TD_GET_CC(td_flags), 560 le32toh(std->td_cbp), 561 le32toh(std->td_next), 562 le32toh(std->td_be)); 563 564 return (temp); 565 } 566 567 static uint8_t 568 ohci_dump_itd(ohci_itd_t *sitd) 569 { 570 uint32_t itd_flags; 571 uint16_t i; 572 uint8_t temp; 573 574 usb_pc_cpu_invalidate(sitd->page_cache); 575 576 itd_flags = le32toh(sitd->itd_flags); 577 temp = (sitd->itd_next == 0); 578 579 printf("ITD(%p) at 0x%08x: sf=%d di=%d fc=%d cc=%d\n" 580 "bp0=0x%08x next=0x%08x be=0x%08x\n", 581 sitd, le32toh(sitd->itd_self), 582 OHCI_ITD_GET_SF(itd_flags), 583 OHCI_ITD_GET_DI(itd_flags), 584 OHCI_ITD_GET_FC(itd_flags), 585 OHCI_ITD_GET_CC(itd_flags), 586 le32toh(sitd->itd_bp0), 587 le32toh(sitd->itd_next), 588 le32toh(sitd->itd_be)); 589 for (i = 0; i < OHCI_ITD_NOFFSET; i++) { 590 printf("offs[%d]=0x%04x ", i, 591 (uint32_t)le16toh(sitd->itd_offset[i])); 592 } 593 printf("\n"); 594 595 return (temp); 596 } 597 598 static void 599 ohci_dump_itds(ohci_itd_t *sitd) 600 { 601 for (; sitd; sitd = sitd->obj_next) { 602 if (ohci_dump_itd(sitd)) { 603 break; 604 } 605 } 606 } 607 608 static void 609 ohci_dump_ed(ohci_ed_t *sed) 610 { 611 uint32_t ed_flags; 612 uint32_t ed_headp; 613 614 usb_pc_cpu_invalidate(sed->page_cache); 615 616 ed_flags = le32toh(sed->ed_flags); 617 ed_headp = le32toh(sed->ed_headp); 618 619 printf("ED(%p) at 0x%08x: addr=%d endpt=%d maxp=%d flags=%s%s%s%s%s\n" 620 "tailp=0x%08x headflags=%s%s headp=0x%08x nexted=0x%08x\n", 621 sed, le32toh(sed->ed_self), 622 OHCI_ED_GET_FA(ed_flags), 623 OHCI_ED_GET_EN(ed_flags), 624 OHCI_ED_GET_MAXP(ed_flags), 625 (ed_flags & OHCI_ED_DIR_OUT) ? "-OUT" : "", 626 (ed_flags & OHCI_ED_DIR_IN) ? "-IN" : "", 627 (ed_flags & OHCI_ED_SPEED) ? "-LOWSPEED" : "", 628 (ed_flags & OHCI_ED_SKIP) ? "-SKIP" : "", 629 (ed_flags & OHCI_ED_FORMAT_ISO) ? "-ISO" : "", 630 le32toh(sed->ed_tailp), 631 (ed_headp & OHCI_HALTED) ? "-HALTED" : "", 632 (ed_headp & OHCI_TOGGLECARRY) ? "-CARRY" : "", 633 le32toh(sed->ed_headp), 634 le32toh(sed->ed_next)); 635 } 636 637 #endif 638 639 static void 640 ohci_transfer_intr_enqueue(struct usb_xfer *xfer) 641 { 642 /* check for early completion */ 643 if (ohci_check_transfer(xfer)) { 644 return; 645 } 646 /* put transfer on interrupt queue */ 647 usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); 648 649 /* start timeout, if any */ 650 if (xfer->timeout != 0) { 651 usbd_transfer_timeout_ms(xfer, &ohci_timeout, xfer->timeout); 652 } 653 } 654 655 #define OHCI_APPEND_QH(sed,last) (last) = _ohci_append_qh(sed,last) 656 static ohci_ed_t * 657 _ohci_append_qh(ohci_ed_t *sed, ohci_ed_t *last) 658 { 659 DPRINTFN(11, "%p to %p\n", sed, last); 660 661 if (sed->prev != NULL) { 662 /* should not happen */ 663 DPRINTFN(0, "ED already linked!\n"); 664 return (last); 665 } 666 /* (sc->sc_bus.bus_mtx) must be locked */ 667 668 sed->next = last->next; 669 sed->ed_next = last->ed_next; 670 sed->ed_tailp = 0; 671 672 sed->prev = last; 673 674 usb_pc_cpu_flush(sed->page_cache); 675 676 /* 677 * the last->next->prev is never followed: sed->next->prev = sed; 678 */ 679 680 last->next = sed; 681 last->ed_next = sed->ed_self; 682 683 usb_pc_cpu_flush(last->page_cache); 684 685 return (sed); 686 } 687 688 #define OHCI_REMOVE_QH(sed,last) (last) = _ohci_remove_qh(sed,last) 689 static ohci_ed_t * 690 _ohci_remove_qh(ohci_ed_t *sed, ohci_ed_t *last) 691 { 692 DPRINTFN(11, "%p from %p\n", sed, last); 693 694 /* (sc->sc_bus.bus_mtx) must be locked */ 695 696 /* only remove if not removed from a queue */ 697 if (sed->prev) { 698 699 sed->prev->next = sed->next; 700 sed->prev->ed_next = sed->ed_next; 701 702 usb_pc_cpu_flush(sed->prev->page_cache); 703 704 if (sed->next) { 705 sed->next->prev = sed->prev; 706 usb_pc_cpu_flush(sed->next->page_cache); 707 } 708 last = ((last == sed) ? sed->prev : last); 709 710 sed->prev = 0; 711 712 usb_pc_cpu_flush(sed->page_cache); 713 } 714 return (last); 715 } 716 717 static void 718 ohci_isoc_done(struct usb_xfer *xfer) 719 { 720 uint8_t nframes; 721 uint32_t *plen = xfer->frlengths; 722 volatile uint16_t *olen; 723 uint16_t len = 0; 724 ohci_itd_t *td = xfer->td_transfer_first; 725 726 while (1) { 727 if (td == NULL) { 728 panic("%s:%d: out of TD's\n", 729 __FUNCTION__, __LINE__); 730 } 731 #ifdef USB_DEBUG 732 if (ohcidebug > 5) { 733 DPRINTF("isoc TD\n"); 734 ohci_dump_itd(td); 735 } 736 #endif 737 usb_pc_cpu_invalidate(td->page_cache); 738 739 nframes = td->frames; 740 olen = &td->itd_offset[0]; 741 742 if (nframes > 8) { 743 nframes = 8; 744 } 745 while (nframes--) { 746 len = le16toh(*olen); 747 748 if ((len >> 12) == OHCI_CC_NOT_ACCESSED) { 749 len = 0; 750 } else { 751 len &= ((1 << 12) - 1); 752 } 753 754 if (len > *plen) { 755 len = 0;/* invalid length */ 756 } 757 *plen = len; 758 plen++; 759 olen++; 760 } 761 762 if (((void *)td) == xfer->td_transfer_last) { 763 break; 764 } 765 td = td->obj_next; 766 } 767 768 xfer->aframes = xfer->nframes; 769 ohci_device_done(xfer, USB_ERR_NORMAL_COMPLETION); 770 } 771 772 #ifdef USB_DEBUG 773 static const char *const 774 ohci_cc_strs[] = 775 { 776 "NO_ERROR", 777 "CRC", 778 "BIT_STUFFING", 779 "DATA_TOGGLE_MISMATCH", 780 781 "STALL", 782 "DEVICE_NOT_RESPONDING", 783 "PID_CHECK_FAILURE", 784 "UNEXPECTED_PID", 785 786 "DATA_OVERRUN", 787 "DATA_UNDERRUN", 788 "BUFFER_OVERRUN", 789 "BUFFER_UNDERRUN", 790 791 "reserved", 792 "reserved", 793 "NOT_ACCESSED", 794 "NOT_ACCESSED" 795 }; 796 797 #endif 798 799 static usb_error_t 800 ohci_non_isoc_done_sub(struct usb_xfer *xfer) 801 { 802 ohci_td_t *td; 803 ohci_td_t *td_alt_next; 804 uint32_t temp; 805 uint32_t phy_start; 806 uint32_t phy_end; 807 uint32_t td_flags; 808 uint16_t cc; 809 810 td = xfer->td_transfer_cache; 811 td_alt_next = td->alt_next; 812 td_flags = 0; 813 814 if (xfer->aframes != xfer->nframes) { 815 usbd_xfer_set_frame_len(xfer, xfer->aframes, 0); 816 } 817 while (1) { 818 819 usb_pc_cpu_invalidate(td->page_cache); 820 phy_start = le32toh(td->td_cbp); 821 td_flags = le32toh(td->td_flags); 822 cc = OHCI_TD_GET_CC(td_flags); 823 824 if (phy_start) { 825 /* 826 * short transfer - compute the number of remaining 827 * bytes in the hardware buffer: 828 */ 829 phy_end = le32toh(td->td_be); 830 temp = (OHCI_PAGE(phy_start ^ phy_end) ? 831 (OHCI_PAGE_SIZE + 1) : 0x0001); 832 temp += OHCI_PAGE_OFFSET(phy_end); 833 temp -= OHCI_PAGE_OFFSET(phy_start); 834 835 if (temp > td->len) { 836 /* guard against corruption */ 837 cc = OHCI_CC_STALL; 838 } else if (xfer->aframes != xfer->nframes) { 839 /* 840 * Sum up total transfer length 841 * in "frlengths[]": 842 */ 843 xfer->frlengths[xfer->aframes] += td->len - temp; 844 } 845 } else { 846 if (xfer->aframes != xfer->nframes) { 847 /* transfer was complete */ 848 xfer->frlengths[xfer->aframes] += td->len; 849 } 850 } 851 /* Check for last transfer */ 852 if (((void *)td) == xfer->td_transfer_last) { 853 td = NULL; 854 break; 855 } 856 /* Check transfer status */ 857 if (cc) { 858 /* the transfer is finished */ 859 td = NULL; 860 break; 861 } 862 /* Check for short transfer */ 863 if (phy_start) { 864 if (xfer->flags_int.short_frames_ok) { 865 /* follow alt next */ 866 td = td->alt_next; 867 } else { 868 /* the transfer is finished */ 869 td = NULL; 870 } 871 break; 872 } 873 td = td->obj_next; 874 875 if (td->alt_next != td_alt_next) { 876 /* this USB frame is complete */ 877 break; 878 } 879 } 880 881 /* update transfer cache */ 882 883 xfer->td_transfer_cache = td; 884 885 DPRINTFN(16, "error cc=%d (%s)\n", 886 cc, ohci_cc_strs[cc]); 887 888 return ((cc == 0) ? USB_ERR_NORMAL_COMPLETION : 889 (cc == OHCI_CC_STALL) ? USB_ERR_STALLED : USB_ERR_IOERROR); 890 } 891 892 static void 893 ohci_non_isoc_done(struct usb_xfer *xfer) 894 { 895 usb_error_t err = 0; 896 897 DPRINTFN(13, "xfer=%p endpoint=%p transfer done\n", 898 xfer, xfer->endpoint); 899 900 #ifdef USB_DEBUG 901 if (ohcidebug > 10) { 902 ohci_dump_tds(xfer->td_transfer_first); 903 } 904 #endif 905 906 /* reset scanner */ 907 908 xfer->td_transfer_cache = xfer->td_transfer_first; 909 910 if (xfer->flags_int.control_xfr) { 911 912 if (xfer->flags_int.control_hdr) { 913 914 err = ohci_non_isoc_done_sub(xfer); 915 } 916 xfer->aframes = 1; 917 918 if (xfer->td_transfer_cache == NULL) { 919 goto done; 920 } 921 } 922 while (xfer->aframes != xfer->nframes) { 923 924 err = ohci_non_isoc_done_sub(xfer); 925 xfer->aframes++; 926 927 if (xfer->td_transfer_cache == NULL) { 928 goto done; 929 } 930 } 931 932 if (xfer->flags_int.control_xfr && 933 !xfer->flags_int.control_act) { 934 935 err = ohci_non_isoc_done_sub(xfer); 936 } 937 done: 938 ohci_device_done(xfer, err); 939 } 940 941 /*------------------------------------------------------------------------* 942 * ohci_check_transfer_sub 943 *------------------------------------------------------------------------*/ 944 static void 945 ohci_check_transfer_sub(struct usb_xfer *xfer) 946 { 947 ohci_td_t *td; 948 ohci_ed_t *ed; 949 uint32_t phy_start; 950 uint32_t td_flags; 951 uint32_t td_next; 952 uint16_t cc; 953 954 td = xfer->td_transfer_cache; 955 956 while (1) { 957 958 usb_pc_cpu_invalidate(td->page_cache); 959 phy_start = le32toh(td->td_cbp); 960 td_flags = le32toh(td->td_flags); 961 td_next = le32toh(td->td_next); 962 963 /* Check for last transfer */ 964 if (((void *)td) == xfer->td_transfer_last) { 965 /* the transfer is finished */ 966 td = NULL; 967 break; 968 } 969 /* Check transfer status */ 970 cc = OHCI_TD_GET_CC(td_flags); 971 if (cc) { 972 /* the transfer is finished */ 973 td = NULL; 974 break; 975 } 976 /* 977 * Check if we reached the last packet 978 * or if there is a short packet: 979 */ 980 981 if (((td_next & (~0xF)) == OHCI_TD_NEXT_END) || phy_start) { 982 /* follow alt next */ 983 td = td->alt_next; 984 break; 985 } 986 td = td->obj_next; 987 } 988 989 /* update transfer cache */ 990 991 xfer->td_transfer_cache = td; 992 993 if (td) { 994 995 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 996 997 ed->ed_headp = td->td_self; 998 usb_pc_cpu_flush(ed->page_cache); 999 1000 DPRINTFN(13, "xfer=%p following alt next\n", xfer); 1001 1002 /* 1003 * Make sure that the OHCI re-scans the schedule by 1004 * writing the BLF and CLF bits: 1005 */ 1006 1007 if (xfer->xroot->udev->flags.self_suspended) { 1008 /* nothing to do */ 1009 } else if (xfer->endpoint->methods == &ohci_device_bulk_methods) { 1010 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1011 1012 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); 1013 } else if (xfer->endpoint->methods == &ohci_device_ctrl_methods) { 1014 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1015 1016 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1017 } 1018 } 1019 } 1020 1021 /*------------------------------------------------------------------------* 1022 * ohci_check_transfer 1023 * 1024 * Return values: 1025 * 0: USB transfer is not finished 1026 * Else: USB transfer is finished 1027 *------------------------------------------------------------------------*/ 1028 static uint8_t 1029 ohci_check_transfer(struct usb_xfer *xfer) 1030 { 1031 ohci_ed_t *ed; 1032 uint32_t ed_headp; 1033 uint32_t ed_tailp; 1034 1035 DPRINTFN(13, "xfer=%p checking transfer\n", xfer); 1036 1037 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1038 1039 usb_pc_cpu_invalidate(ed->page_cache); 1040 ed_headp = le32toh(ed->ed_headp); 1041 ed_tailp = le32toh(ed->ed_tailp); 1042 1043 if ((ed_headp & OHCI_HALTED) || 1044 (((ed_headp ^ ed_tailp) & (~0xF)) == 0)) { 1045 if (xfer->endpoint->methods == &ohci_device_isoc_methods) { 1046 /* isochronous transfer */ 1047 ohci_isoc_done(xfer); 1048 } else { 1049 if (xfer->flags_int.short_frames_ok) { 1050 ohci_check_transfer_sub(xfer); 1051 if (xfer->td_transfer_cache) { 1052 /* not finished yet */ 1053 return (0); 1054 } 1055 } 1056 /* store data-toggle */ 1057 if (ed_headp & OHCI_TOGGLECARRY) { 1058 xfer->endpoint->toggle_next = 1; 1059 } else { 1060 xfer->endpoint->toggle_next = 0; 1061 } 1062 1063 /* non-isochronous transfer */ 1064 ohci_non_isoc_done(xfer); 1065 } 1066 return (1); 1067 } 1068 DPRINTFN(13, "xfer=%p is still active\n", xfer); 1069 return (0); 1070 } 1071 1072 static void 1073 ohci_rhsc_enable(ohci_softc_t *sc) 1074 { 1075 DPRINTFN(5, "\n"); 1076 1077 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1078 1079 sc->sc_eintrs |= OHCI_RHSC; 1080 OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC); 1081 1082 /* acknowledge any RHSC interrupt */ 1083 OWRITE4(sc, OHCI_INTERRUPT_STATUS, OHCI_RHSC); 1084 1085 ohci_root_intr(sc); 1086 } 1087 1088 static void 1089 ohci_interrupt_poll(ohci_softc_t *sc) 1090 { 1091 struct usb_xfer *xfer; 1092 1093 repeat: 1094 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 1095 /* 1096 * check if transfer is transferred 1097 */ 1098 if (ohci_check_transfer(xfer)) { 1099 /* queue has been modified */ 1100 goto repeat; 1101 } 1102 } 1103 } 1104 1105 /*------------------------------------------------------------------------* 1106 * ohci_interrupt - OHCI interrupt handler 1107 * 1108 * NOTE: Do not access "sc->sc_bus.bdev" inside the interrupt handler, 1109 * hence the interrupt handler will be setup before "sc->sc_bus.bdev" 1110 * is present ! 1111 *------------------------------------------------------------------------*/ 1112 void 1113 ohci_interrupt(ohci_softc_t *sc) 1114 { 1115 struct ohci_hcca *hcca; 1116 uint32_t status; 1117 uint32_t done; 1118 1119 USB_BUS_LOCK(&sc->sc_bus); 1120 1121 hcca = ohci_get_hcca(sc); 1122 1123 DPRINTFN(16, "real interrupt\n"); 1124 1125 #ifdef USB_DEBUG 1126 if (ohcidebug > 15) { 1127 ohci_dumpregs(sc); 1128 } 1129 #endif 1130 1131 done = le32toh(hcca->hcca_done_head); 1132 1133 /* 1134 * The LSb of done is used to inform the HC Driver that an interrupt 1135 * condition exists for both the Done list and for another event 1136 * recorded in HcInterruptStatus. On an interrupt from the HC, the 1137 * HC Driver checks the HccaDoneHead Value. If this value is 0, then 1138 * the interrupt was caused by other than the HccaDoneHead update 1139 * and the HcInterruptStatus register needs to be accessed to 1140 * determine that exact interrupt cause. If HccaDoneHead is nonzero, 1141 * then a Done list update interrupt is indicated and if the LSb of 1142 * done is nonzero, then an additional interrupt event is indicated 1143 * and HcInterruptStatus should be checked to determine its cause. 1144 */ 1145 if (done != 0) { 1146 status = 0; 1147 1148 if (done & ~OHCI_DONE_INTRS) { 1149 status |= OHCI_WDH; 1150 } 1151 if (done & OHCI_DONE_INTRS) { 1152 status |= OREAD4(sc, OHCI_INTERRUPT_STATUS); 1153 } 1154 hcca->hcca_done_head = 0; 1155 1156 usb_pc_cpu_flush(&sc->sc_hw.hcca_pc); 1157 } else { 1158 status = OREAD4(sc, OHCI_INTERRUPT_STATUS) & ~OHCI_WDH; 1159 } 1160 1161 status &= ~OHCI_MIE; 1162 if (status == 0) { 1163 /* 1164 * nothing to be done (PCI shared 1165 * interrupt) 1166 */ 1167 goto done; 1168 } 1169 OWRITE4(sc, OHCI_INTERRUPT_STATUS, status); /* Acknowledge */ 1170 1171 status &= sc->sc_eintrs; 1172 if (status == 0) { 1173 goto done; 1174 } 1175 if (status & (OHCI_SO | OHCI_RD | OHCI_UE | OHCI_RHSC)) { 1176 #if 0 1177 if (status & OHCI_SO) { 1178 /* XXX do what */ 1179 } 1180 #endif 1181 if (status & OHCI_RD) { 1182 printf("%s: resume detect\n", __FUNCTION__); 1183 /* XXX process resume detect */ 1184 } 1185 if (status & OHCI_UE) { 1186 printf("%s: unrecoverable error, " 1187 "controller halted\n", __FUNCTION__); 1188 OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET); 1189 /* XXX what else */ 1190 } 1191 if (status & OHCI_RHSC) { 1192 /* 1193 * Disable RHSC interrupt for now, because it will be 1194 * on until the port has been reset. 1195 */ 1196 sc->sc_eintrs &= ~OHCI_RHSC; 1197 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC); 1198 1199 ohci_root_intr(sc); 1200 1201 /* do not allow RHSC interrupts > 1 per second */ 1202 usb_callout_reset(&sc->sc_tmo_rhsc, hz, 1203 (void *)&ohci_rhsc_enable, sc); 1204 } 1205 } 1206 status &= ~(OHCI_RHSC | OHCI_WDH | OHCI_SO); 1207 if (status != 0) { 1208 /* Block unprocessed interrupts. XXX */ 1209 OWRITE4(sc, OHCI_INTERRUPT_DISABLE, status); 1210 sc->sc_eintrs &= ~status; 1211 printf("%s: blocking intrs 0x%x\n", 1212 __FUNCTION__, status); 1213 } 1214 /* poll all the USB transfers */ 1215 ohci_interrupt_poll(sc); 1216 1217 done: 1218 USB_BUS_UNLOCK(&sc->sc_bus); 1219 } 1220 1221 /* 1222 * called when a request does not complete 1223 */ 1224 static void 1225 ohci_timeout(void *arg) 1226 { 1227 struct usb_xfer *xfer = arg; 1228 1229 DPRINTF("xfer=%p\n", xfer); 1230 1231 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 1232 1233 /* transfer is transferred */ 1234 ohci_device_done(xfer, USB_ERR_TIMEOUT); 1235 } 1236 1237 static void 1238 ohci_do_poll(struct usb_bus *bus) 1239 { 1240 struct ohci_softc *sc = OHCI_BUS2SC(bus); 1241 1242 USB_BUS_LOCK(&sc->sc_bus); 1243 ohci_interrupt_poll(sc); 1244 USB_BUS_UNLOCK(&sc->sc_bus); 1245 } 1246 1247 static void 1248 ohci_setup_standard_chain_sub(struct ohci_std_temp *temp) 1249 { 1250 struct usb_page_search buf_res; 1251 ohci_td_t *td; 1252 ohci_td_t *td_next; 1253 ohci_td_t *td_alt_next; 1254 uint32_t buf_offset; 1255 uint32_t average; 1256 uint32_t len_old; 1257 uint8_t shortpkt_old; 1258 uint8_t precompute; 1259 1260 td_alt_next = NULL; 1261 buf_offset = 0; 1262 shortpkt_old = temp->shortpkt; 1263 len_old = temp->len; 1264 precompute = 1; 1265 1266 /* software is used to detect short incoming transfers */ 1267 1268 if ((temp->td_flags & htole32(OHCI_TD_DP_MASK)) == htole32(OHCI_TD_IN)) { 1269 temp->td_flags |= htole32(OHCI_TD_R); 1270 } else { 1271 temp->td_flags &= ~htole32(OHCI_TD_R); 1272 } 1273 1274 restart: 1275 1276 td = temp->td; 1277 td_next = temp->td_next; 1278 1279 while (1) { 1280 1281 if (temp->len == 0) { 1282 1283 if (temp->shortpkt) { 1284 break; 1285 } 1286 /* send a Zero Length Packet, ZLP, last */ 1287 1288 temp->shortpkt = 1; 1289 average = 0; 1290 1291 } else { 1292 1293 average = temp->average; 1294 1295 if (temp->len < average) { 1296 if (temp->len % temp->max_frame_size) { 1297 temp->shortpkt = 1; 1298 } 1299 average = temp->len; 1300 } 1301 } 1302 1303 if (td_next == NULL) { 1304 panic("%s: out of OHCI transfer descriptors!", __FUNCTION__); 1305 } 1306 /* get next TD */ 1307 1308 td = td_next; 1309 td_next = td->obj_next; 1310 1311 /* check if we are pre-computing */ 1312 1313 if (precompute) { 1314 1315 /* update remaining length */ 1316 1317 temp->len -= average; 1318 1319 continue; 1320 } 1321 /* fill out current TD */ 1322 td->td_flags = temp->td_flags; 1323 1324 /* the next TD uses TOGGLE_CARRY */ 1325 temp->td_flags &= ~htole32(OHCI_TD_TOGGLE_MASK); 1326 1327 if (average == 0) { 1328 /* 1329 * The buffer start and end phys addresses should be 1330 * 0x0 for a zero length packet. 1331 */ 1332 td->td_cbp = 0; 1333 td->td_be = 0; 1334 td->len = 0; 1335 1336 } else { 1337 1338 usbd_get_page(temp->pc, buf_offset, &buf_res); 1339 td->td_cbp = htole32(buf_res.physaddr); 1340 buf_offset += (average - 1); 1341 1342 usbd_get_page(temp->pc, buf_offset, &buf_res); 1343 td->td_be = htole32(buf_res.physaddr); 1344 buf_offset++; 1345 1346 td->len = average; 1347 1348 /* update remaining length */ 1349 1350 temp->len -= average; 1351 } 1352 1353 if ((td_next == td_alt_next) && temp->setup_alt_next) { 1354 /* we need to receive these frames one by one ! */ 1355 td->td_flags &= htole32(~OHCI_TD_INTR_MASK); 1356 td->td_flags |= htole32(OHCI_TD_SET_DI(1)); 1357 td->td_next = htole32(OHCI_TD_NEXT_END); 1358 } else { 1359 if (td_next) { 1360 /* link the current TD with the next one */ 1361 td->td_next = td_next->td_self; 1362 } 1363 } 1364 1365 td->alt_next = td_alt_next; 1366 1367 usb_pc_cpu_flush(td->page_cache); 1368 } 1369 1370 if (precompute) { 1371 precompute = 0; 1372 1373 /* setup alt next pointer, if any */ 1374 if (temp->last_frame) { 1375 /* no alternate next */ 1376 td_alt_next = NULL; 1377 } else { 1378 /* we use this field internally */ 1379 td_alt_next = td_next; 1380 } 1381 1382 /* restore */ 1383 temp->shortpkt = shortpkt_old; 1384 temp->len = len_old; 1385 goto restart; 1386 } 1387 temp->td = td; 1388 temp->td_next = td_next; 1389 } 1390 1391 static void 1392 ohci_setup_standard_chain(struct usb_xfer *xfer, ohci_ed_t **ed_last) 1393 { 1394 struct ohci_std_temp temp; 1395 const struct usb_pipe_methods *methods; 1396 ohci_ed_t *ed; 1397 ohci_td_t *td; 1398 uint32_t ed_flags; 1399 uint32_t x; 1400 1401 DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n", 1402 xfer->address, UE_GET_ADDR(xfer->endpointno), 1403 xfer->sumlen, usbd_get_speed(xfer->xroot->udev)); 1404 1405 temp.average = xfer->max_hc_frame_size; 1406 temp.max_frame_size = xfer->max_frame_size; 1407 1408 /* toggle the DMA set we are using */ 1409 xfer->flags_int.curr_dma_set ^= 1; 1410 1411 /* get next DMA set */ 1412 td = xfer->td_start[xfer->flags_int.curr_dma_set]; 1413 1414 xfer->td_transfer_first = td; 1415 xfer->td_transfer_cache = td; 1416 1417 temp.td = NULL; 1418 temp.td_next = td; 1419 temp.last_frame = 0; 1420 temp.setup_alt_next = xfer->flags_int.short_frames_ok; 1421 1422 methods = xfer->endpoint->methods; 1423 1424 /* check if we should prepend a setup message */ 1425 1426 if (xfer->flags_int.control_xfr) { 1427 if (xfer->flags_int.control_hdr) { 1428 1429 temp.td_flags = htole32(OHCI_TD_SETUP | OHCI_TD_NOCC | 1430 OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR); 1431 1432 temp.len = xfer->frlengths[0]; 1433 temp.pc = xfer->frbuffers + 0; 1434 temp.shortpkt = temp.len ? 1 : 0; 1435 /* check for last frame */ 1436 if (xfer->nframes == 1) { 1437 /* no STATUS stage yet, SETUP is last */ 1438 if (xfer->flags_int.control_act) { 1439 temp.last_frame = 1; 1440 temp.setup_alt_next = 0; 1441 } 1442 } 1443 ohci_setup_standard_chain_sub(&temp); 1444 1445 /* 1446 * XXX assume that the setup message is 1447 * contained within one USB packet: 1448 */ 1449 xfer->endpoint->toggle_next = 1; 1450 } 1451 x = 1; 1452 } else { 1453 x = 0; 1454 } 1455 temp.td_flags = htole32(OHCI_TD_NOCC | OHCI_TD_NOINTR); 1456 1457 /* set data toggle */ 1458 1459 if (xfer->endpoint->toggle_next) { 1460 temp.td_flags |= htole32(OHCI_TD_TOGGLE_1); 1461 } else { 1462 temp.td_flags |= htole32(OHCI_TD_TOGGLE_0); 1463 } 1464 1465 /* set endpoint direction */ 1466 1467 if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) { 1468 temp.td_flags |= htole32(OHCI_TD_IN); 1469 } else { 1470 temp.td_flags |= htole32(OHCI_TD_OUT); 1471 } 1472 1473 while (x != xfer->nframes) { 1474 1475 /* DATA0 / DATA1 message */ 1476 1477 temp.len = xfer->frlengths[x]; 1478 temp.pc = xfer->frbuffers + x; 1479 1480 x++; 1481 1482 if (x == xfer->nframes) { 1483 if (xfer->flags_int.control_xfr) { 1484 /* no STATUS stage yet, DATA is last */ 1485 if (xfer->flags_int.control_act) { 1486 temp.last_frame = 1; 1487 temp.setup_alt_next = 0; 1488 } 1489 } else { 1490 temp.last_frame = 1; 1491 temp.setup_alt_next = 0; 1492 } 1493 } 1494 if (temp.len == 0) { 1495 1496 /* make sure that we send an USB packet */ 1497 1498 temp.shortpkt = 0; 1499 1500 } else { 1501 1502 /* regular data transfer */ 1503 1504 temp.shortpkt = (xfer->flags.force_short_xfer) ? 0 : 1; 1505 } 1506 1507 ohci_setup_standard_chain_sub(&temp); 1508 } 1509 1510 /* check if we should append a status stage */ 1511 1512 if (xfer->flags_int.control_xfr && 1513 !xfer->flags_int.control_act) { 1514 1515 /* 1516 * Send a DATA1 message and invert the current endpoint 1517 * direction. 1518 */ 1519 1520 /* set endpoint direction and data toggle */ 1521 1522 if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) { 1523 temp.td_flags = htole32(OHCI_TD_OUT | 1524 OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); 1525 } else { 1526 temp.td_flags = htole32(OHCI_TD_IN | 1527 OHCI_TD_NOCC | OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1)); 1528 } 1529 1530 temp.len = 0; 1531 temp.pc = NULL; 1532 temp.shortpkt = 0; 1533 temp.last_frame = 1; 1534 temp.setup_alt_next = 0; 1535 1536 ohci_setup_standard_chain_sub(&temp); 1537 } 1538 td = temp.td; 1539 1540 /* Ensure that last TD is terminating: */ 1541 td->td_next = htole32(OHCI_TD_NEXT_END); 1542 td->td_flags &= ~htole32(OHCI_TD_INTR_MASK); 1543 td->td_flags |= htole32(OHCI_TD_SET_DI(1)); 1544 1545 usb_pc_cpu_flush(td->page_cache); 1546 1547 /* must have at least one frame! */ 1548 1549 xfer->td_transfer_last = td; 1550 1551 #ifdef USB_DEBUG 1552 if (ohcidebug > 8) { 1553 DPRINTF("nexttog=%d; data before transfer:\n", 1554 xfer->endpoint->toggle_next); 1555 ohci_dump_tds(xfer->td_transfer_first); 1556 } 1557 #endif 1558 1559 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1560 1561 ed_flags = (OHCI_ED_SET_FA(xfer->address) | 1562 OHCI_ED_SET_EN(UE_GET_ADDR(xfer->endpointno)) | 1563 OHCI_ED_SET_MAXP(xfer->max_frame_size)); 1564 1565 ed_flags |= (OHCI_ED_FORMAT_GEN | OHCI_ED_DIR_TD); 1566 1567 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 1568 ed_flags |= OHCI_ED_SPEED; 1569 } 1570 ed->ed_flags = htole32(ed_flags); 1571 1572 td = xfer->td_transfer_first; 1573 1574 ed->ed_headp = td->td_self; 1575 1576 if (xfer->xroot->udev->flags.self_suspended == 0) { 1577 /* the append function will flush the endpoint descriptor */ 1578 OHCI_APPEND_QH(ed, *ed_last); 1579 1580 if (methods == &ohci_device_bulk_methods) { 1581 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1582 1583 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); 1584 } 1585 if (methods == &ohci_device_ctrl_methods) { 1586 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1587 1588 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 1589 } 1590 } else { 1591 usb_pc_cpu_flush(ed->page_cache); 1592 } 1593 } 1594 1595 static void 1596 ohci_root_intr(ohci_softc_t *sc) 1597 { 1598 uint32_t hstatus; 1599 uint16_t i; 1600 uint16_t m; 1601 1602 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1603 1604 /* clear any old interrupt data */ 1605 memset(sc->sc_hub_idata, 0, sizeof(sc->sc_hub_idata)); 1606 1607 hstatus = OREAD4(sc, OHCI_RH_STATUS); 1608 DPRINTF("sc=%p hstatus=0x%08x\n", 1609 sc, hstatus); 1610 1611 /* set bits */ 1612 m = (sc->sc_noport + 1); 1613 if (m > (8 * sizeof(sc->sc_hub_idata))) { 1614 m = (8 * sizeof(sc->sc_hub_idata)); 1615 } 1616 for (i = 1; i < m; i++) { 1617 /* pick out CHANGE bits from the status register */ 1618 if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16) { 1619 sc->sc_hub_idata[i / 8] |= 1 << (i % 8); 1620 DPRINTF("port %d changed\n", i); 1621 } 1622 } 1623 1624 uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, 1625 sizeof(sc->sc_hub_idata)); 1626 } 1627 1628 /* NOTE: "done" can be run two times in a row, 1629 * from close and from interrupt 1630 */ 1631 static void 1632 ohci_device_done(struct usb_xfer *xfer, usb_error_t error) 1633 { 1634 const struct usb_pipe_methods *methods = xfer->endpoint->methods; 1635 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1636 ohci_ed_t *ed; 1637 1638 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1639 1640 1641 DPRINTFN(2, "xfer=%p, endpoint=%p, error=%d\n", 1642 xfer, xfer->endpoint, error); 1643 1644 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1645 if (ed) { 1646 usb_pc_cpu_invalidate(ed->page_cache); 1647 } 1648 if (methods == &ohci_device_bulk_methods) { 1649 OHCI_REMOVE_QH(ed, sc->sc_bulk_p_last); 1650 } 1651 if (methods == &ohci_device_ctrl_methods) { 1652 OHCI_REMOVE_QH(ed, sc->sc_ctrl_p_last); 1653 } 1654 if (methods == &ohci_device_intr_methods) { 1655 OHCI_REMOVE_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); 1656 } 1657 if (methods == &ohci_device_isoc_methods) { 1658 OHCI_REMOVE_QH(ed, sc->sc_isoc_p_last); 1659 } 1660 xfer->td_transfer_first = NULL; 1661 xfer->td_transfer_last = NULL; 1662 1663 /* dequeue transfer and start next transfer */ 1664 usbd_transfer_done(xfer, error); 1665 } 1666 1667 /*------------------------------------------------------------------------* 1668 * ohci bulk support 1669 *------------------------------------------------------------------------*/ 1670 static void 1671 ohci_device_bulk_open(struct usb_xfer *xfer) 1672 { 1673 return; 1674 } 1675 1676 static void 1677 ohci_device_bulk_close(struct usb_xfer *xfer) 1678 { 1679 ohci_device_done(xfer, USB_ERR_CANCELLED); 1680 } 1681 1682 static void 1683 ohci_device_bulk_enter(struct usb_xfer *xfer) 1684 { 1685 return; 1686 } 1687 1688 static void 1689 ohci_device_bulk_start(struct usb_xfer *xfer) 1690 { 1691 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1692 1693 /* setup TD's and QH */ 1694 ohci_setup_standard_chain(xfer, &sc->sc_bulk_p_last); 1695 1696 /* put transfer on interrupt queue */ 1697 ohci_transfer_intr_enqueue(xfer); 1698 } 1699 1700 static const struct usb_pipe_methods ohci_device_bulk_methods = 1701 { 1702 .open = ohci_device_bulk_open, 1703 .close = ohci_device_bulk_close, 1704 .enter = ohci_device_bulk_enter, 1705 .start = ohci_device_bulk_start, 1706 }; 1707 1708 /*------------------------------------------------------------------------* 1709 * ohci control support 1710 *------------------------------------------------------------------------*/ 1711 static void 1712 ohci_device_ctrl_open(struct usb_xfer *xfer) 1713 { 1714 return; 1715 } 1716 1717 static void 1718 ohci_device_ctrl_close(struct usb_xfer *xfer) 1719 { 1720 ohci_device_done(xfer, USB_ERR_CANCELLED); 1721 } 1722 1723 static void 1724 ohci_device_ctrl_enter(struct usb_xfer *xfer) 1725 { 1726 return; 1727 } 1728 1729 static void 1730 ohci_device_ctrl_start(struct usb_xfer *xfer) 1731 { 1732 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1733 1734 /* setup TD's and QH */ 1735 ohci_setup_standard_chain(xfer, &sc->sc_ctrl_p_last); 1736 1737 /* put transfer on interrupt queue */ 1738 ohci_transfer_intr_enqueue(xfer); 1739 } 1740 1741 static const struct usb_pipe_methods ohci_device_ctrl_methods = 1742 { 1743 .open = ohci_device_ctrl_open, 1744 .close = ohci_device_ctrl_close, 1745 .enter = ohci_device_ctrl_enter, 1746 .start = ohci_device_ctrl_start, 1747 }; 1748 1749 /*------------------------------------------------------------------------* 1750 * ohci interrupt support 1751 *------------------------------------------------------------------------*/ 1752 static void 1753 ohci_device_intr_open(struct usb_xfer *xfer) 1754 { 1755 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1756 uint16_t best; 1757 uint16_t bit; 1758 uint16_t x; 1759 1760 best = 0; 1761 bit = OHCI_NO_EDS / 2; 1762 while (bit) { 1763 if (xfer->interval >= bit) { 1764 x = bit; 1765 best = bit; 1766 while (x & bit) { 1767 if (sc->sc_intr_stat[x] < 1768 sc->sc_intr_stat[best]) { 1769 best = x; 1770 } 1771 x++; 1772 } 1773 break; 1774 } 1775 bit >>= 1; 1776 } 1777 1778 sc->sc_intr_stat[best]++; 1779 xfer->qh_pos = best; 1780 1781 DPRINTFN(3, "best=%d interval=%d\n", 1782 best, xfer->interval); 1783 } 1784 1785 static void 1786 ohci_device_intr_close(struct usb_xfer *xfer) 1787 { 1788 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1789 1790 sc->sc_intr_stat[xfer->qh_pos]--; 1791 1792 ohci_device_done(xfer, USB_ERR_CANCELLED); 1793 } 1794 1795 static void 1796 ohci_device_intr_enter(struct usb_xfer *xfer) 1797 { 1798 return; 1799 } 1800 1801 static void 1802 ohci_device_intr_start(struct usb_xfer *xfer) 1803 { 1804 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1805 1806 /* setup TD's and QH */ 1807 ohci_setup_standard_chain(xfer, &sc->sc_intr_p_last[xfer->qh_pos]); 1808 1809 /* put transfer on interrupt queue */ 1810 ohci_transfer_intr_enqueue(xfer); 1811 } 1812 1813 static const struct usb_pipe_methods ohci_device_intr_methods = 1814 { 1815 .open = ohci_device_intr_open, 1816 .close = ohci_device_intr_close, 1817 .enter = ohci_device_intr_enter, 1818 .start = ohci_device_intr_start, 1819 }; 1820 1821 /*------------------------------------------------------------------------* 1822 * ohci isochronous support 1823 *------------------------------------------------------------------------*/ 1824 static void 1825 ohci_device_isoc_open(struct usb_xfer *xfer) 1826 { 1827 return; 1828 } 1829 1830 static void 1831 ohci_device_isoc_close(struct usb_xfer *xfer) 1832 { 1833 /**/ 1834 ohci_device_done(xfer, USB_ERR_CANCELLED); 1835 } 1836 1837 static void 1838 ohci_device_isoc_enter(struct usb_xfer *xfer) 1839 { 1840 struct usb_page_search buf_res; 1841 ohci_softc_t *sc = OHCI_BUS2SC(xfer->xroot->bus); 1842 struct ohci_hcca *hcca; 1843 uint32_t buf_offset; 1844 uint32_t nframes; 1845 uint32_t ed_flags; 1846 uint32_t *plen; 1847 uint16_t itd_offset[OHCI_ITD_NOFFSET]; 1848 uint16_t length; 1849 uint8_t ncur; 1850 ohci_itd_t *td; 1851 ohci_itd_t *td_last = NULL; 1852 ohci_ed_t *ed; 1853 1854 hcca = ohci_get_hcca(sc); 1855 1856 nframes = le32toh(hcca->hcca_frame_number); 1857 1858 DPRINTFN(6, "xfer=%p isoc_next=%u nframes=%u hcca_fn=%u\n", 1859 xfer, xfer->endpoint->isoc_next, xfer->nframes, nframes); 1860 1861 if ((xfer->endpoint->is_synced == 0) || 1862 (((nframes - xfer->endpoint->isoc_next) & 0xFFFF) < xfer->nframes) || 1863 (((xfer->endpoint->isoc_next - nframes) & 0xFFFF) >= 128)) { 1864 /* 1865 * If there is data underflow or the pipe queue is empty we 1866 * schedule the transfer a few frames ahead of the current 1867 * frame position. Else two isochronous transfers might 1868 * overlap. 1869 */ 1870 xfer->endpoint->isoc_next = (nframes + 3) & 0xFFFF; 1871 xfer->endpoint->is_synced = 1; 1872 DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); 1873 } 1874 /* 1875 * compute how many milliseconds the insertion is ahead of the 1876 * current frame position: 1877 */ 1878 buf_offset = ((xfer->endpoint->isoc_next - nframes) & 0xFFFF); 1879 1880 /* 1881 * pre-compute when the isochronous transfer will be finished: 1882 */ 1883 xfer->isoc_time_complete = 1884 (usb_isoc_time_expand(&sc->sc_bus, nframes) + buf_offset + 1885 xfer->nframes); 1886 1887 /* get the real number of frames */ 1888 1889 nframes = xfer->nframes; 1890 1891 buf_offset = 0; 1892 1893 plen = xfer->frlengths; 1894 1895 /* toggle the DMA set we are using */ 1896 xfer->flags_int.curr_dma_set ^= 1; 1897 1898 /* get next DMA set */ 1899 td = xfer->td_start[xfer->flags_int.curr_dma_set]; 1900 1901 xfer->td_transfer_first = td; 1902 1903 ncur = 0; 1904 length = 0; 1905 1906 while (nframes--) { 1907 if (td == NULL) { 1908 panic("%s:%d: out of TD's\n", 1909 __FUNCTION__, __LINE__); 1910 } 1911 itd_offset[ncur] = length; 1912 buf_offset += *plen; 1913 length += *plen; 1914 plen++; 1915 ncur++; 1916 1917 if ( /* check if the ITD is full */ 1918 (ncur == OHCI_ITD_NOFFSET) || 1919 /* check if we have put more than 4K into the ITD */ 1920 (length & 0xF000) || 1921 /* check if it is the last frame */ 1922 (nframes == 0)) { 1923 1924 /* fill current ITD */ 1925 td->itd_flags = htole32( 1926 OHCI_ITD_NOCC | 1927 OHCI_ITD_SET_SF(xfer->endpoint->isoc_next) | 1928 OHCI_ITD_NOINTR | 1929 OHCI_ITD_SET_FC(ncur)); 1930 1931 td->frames = ncur; 1932 xfer->endpoint->isoc_next += ncur; 1933 1934 if (length == 0) { 1935 /* all zero */ 1936 td->itd_bp0 = 0; 1937 td->itd_be = ~0; 1938 1939 while (ncur--) { 1940 td->itd_offset[ncur] = 1941 htole16(OHCI_ITD_MK_OFFS(0)); 1942 } 1943 } else { 1944 usbd_get_page(xfer->frbuffers, buf_offset - length, &buf_res); 1945 length = OHCI_PAGE_MASK(buf_res.physaddr); 1946 buf_res.physaddr = 1947 OHCI_PAGE(buf_res.physaddr); 1948 td->itd_bp0 = htole32(buf_res.physaddr); 1949 usbd_get_page(xfer->frbuffers, buf_offset - 1, &buf_res); 1950 td->itd_be = htole32(buf_res.physaddr); 1951 1952 while (ncur--) { 1953 itd_offset[ncur] += length; 1954 itd_offset[ncur] = 1955 OHCI_ITD_MK_OFFS(itd_offset[ncur]); 1956 td->itd_offset[ncur] = 1957 htole16(itd_offset[ncur]); 1958 } 1959 } 1960 ncur = 0; 1961 length = 0; 1962 td_last = td; 1963 td = td->obj_next; 1964 1965 if (td) { 1966 /* link the last TD with the next one */ 1967 td_last->itd_next = td->itd_self; 1968 } 1969 usb_pc_cpu_flush(td_last->page_cache); 1970 } 1971 } 1972 1973 /* update the last TD */ 1974 td_last->itd_flags &= ~htole32(OHCI_ITD_NOINTR); 1975 td_last->itd_flags |= htole32(OHCI_ITD_SET_DI(0)); 1976 td_last->itd_next = 0; 1977 1978 usb_pc_cpu_flush(td_last->page_cache); 1979 1980 xfer->td_transfer_last = td_last; 1981 1982 #ifdef USB_DEBUG 1983 if (ohcidebug > 8) { 1984 DPRINTF("data before transfer:\n"); 1985 ohci_dump_itds(xfer->td_transfer_first); 1986 } 1987 #endif 1988 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 1989 1990 if (UE_GET_DIR(xfer->endpointno) == UE_DIR_IN) 1991 ed_flags = (OHCI_ED_DIR_IN | OHCI_ED_FORMAT_ISO); 1992 else 1993 ed_flags = (OHCI_ED_DIR_OUT | OHCI_ED_FORMAT_ISO); 1994 1995 ed_flags |= (OHCI_ED_SET_FA(xfer->address) | 1996 OHCI_ED_SET_EN(UE_GET_ADDR(xfer->endpointno)) | 1997 OHCI_ED_SET_MAXP(xfer->max_frame_size)); 1998 1999 if (xfer->xroot->udev->speed == USB_SPEED_LOW) { 2000 ed_flags |= OHCI_ED_SPEED; 2001 } 2002 ed->ed_flags = htole32(ed_flags); 2003 2004 td = xfer->td_transfer_first; 2005 2006 ed->ed_headp = td->itd_self; 2007 2008 /* isochronous transfers are not affected by suspend / resume */ 2009 /* the append function will flush the endpoint descriptor */ 2010 2011 OHCI_APPEND_QH(ed, sc->sc_isoc_p_last); 2012 } 2013 2014 static void 2015 ohci_device_isoc_start(struct usb_xfer *xfer) 2016 { 2017 /* put transfer on interrupt queue */ 2018 ohci_transfer_intr_enqueue(xfer); 2019 } 2020 2021 static const struct usb_pipe_methods ohci_device_isoc_methods = 2022 { 2023 .open = ohci_device_isoc_open, 2024 .close = ohci_device_isoc_close, 2025 .enter = ohci_device_isoc_enter, 2026 .start = ohci_device_isoc_start, 2027 }; 2028 2029 /*------------------------------------------------------------------------* 2030 * ohci root control support 2031 *------------------------------------------------------------------------* 2032 * Simulate a hardware hub by handling all the necessary requests. 2033 *------------------------------------------------------------------------*/ 2034 2035 static const 2036 struct usb_device_descriptor ohci_devd = 2037 { 2038 sizeof(struct usb_device_descriptor), 2039 UDESC_DEVICE, /* type */ 2040 {0x00, 0x01}, /* USB version */ 2041 UDCLASS_HUB, /* class */ 2042 UDSUBCLASS_HUB, /* subclass */ 2043 UDPROTO_FSHUB, /* protocol */ 2044 64, /* max packet */ 2045 {0}, {0}, {0x00, 0x01}, /* device id */ 2046 1, 2, 0, /* string indicies */ 2047 1 /* # of configurations */ 2048 }; 2049 2050 static const 2051 struct ohci_config_desc ohci_confd = 2052 { 2053 .confd = { 2054 .bLength = sizeof(struct usb_config_descriptor), 2055 .bDescriptorType = UDESC_CONFIG, 2056 .wTotalLength[0] = sizeof(ohci_confd), 2057 .bNumInterface = 1, 2058 .bConfigurationValue = 1, 2059 .iConfiguration = 0, 2060 .bmAttributes = UC_SELF_POWERED, 2061 .bMaxPower = 0, /* max power */ 2062 }, 2063 .ifcd = { 2064 .bLength = sizeof(struct usb_interface_descriptor), 2065 .bDescriptorType = UDESC_INTERFACE, 2066 .bNumEndpoints = 1, 2067 .bInterfaceClass = UICLASS_HUB, 2068 .bInterfaceSubClass = UISUBCLASS_HUB, 2069 .bInterfaceProtocol = 0, 2070 }, 2071 .endpd = { 2072 .bLength = sizeof(struct usb_endpoint_descriptor), 2073 .bDescriptorType = UDESC_ENDPOINT, 2074 .bEndpointAddress = UE_DIR_IN | OHCI_INTR_ENDPT, 2075 .bmAttributes = UE_INTERRUPT, 2076 .wMaxPacketSize[0] = 32,/* max packet (255 ports) */ 2077 .bInterval = 255, 2078 }, 2079 }; 2080 2081 static const 2082 struct usb_hub_descriptor ohci_hubd = 2083 { 2084 .bDescLength = 0, /* dynamic length */ 2085 .bDescriptorType = UDESC_HUB, 2086 }; 2087 2088 static usb_error_t 2089 ohci_roothub_exec(struct usb_device *udev, 2090 struct usb_device_request *req, const void **pptr, uint16_t *plength) 2091 { 2092 ohci_softc_t *sc = OHCI_BUS2SC(udev->bus); 2093 const void *ptr; 2094 const char *str_ptr; 2095 uint32_t port; 2096 uint32_t v; 2097 uint16_t len; 2098 uint16_t value; 2099 uint16_t index; 2100 uint8_t l; 2101 usb_error_t err; 2102 2103 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 2104 2105 /* buffer reset */ 2106 ptr = (const void *)&sc->sc_hub_desc.temp; 2107 len = 0; 2108 err = 0; 2109 2110 value = UGETW(req->wValue); 2111 index = UGETW(req->wIndex); 2112 2113 DPRINTFN(3, "type=0x%02x request=0x%02x wLen=0x%04x " 2114 "wValue=0x%04x wIndex=0x%04x\n", 2115 req->bmRequestType, req->bRequest, 2116 UGETW(req->wLength), value, index); 2117 2118 #define C(x,y) ((x) | ((y) << 8)) 2119 switch (C(req->bRequest, req->bmRequestType)) { 2120 case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE): 2121 case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE): 2122 case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT): 2123 /* 2124 * DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops 2125 * for the integrated root hub. 2126 */ 2127 break; 2128 case C(UR_GET_CONFIG, UT_READ_DEVICE): 2129 len = 1; 2130 sc->sc_hub_desc.temp[0] = sc->sc_conf; 2131 break; 2132 case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE): 2133 switch (value >> 8) { 2134 case UDESC_DEVICE: 2135 if ((value & 0xff) != 0) { 2136 err = USB_ERR_IOERROR; 2137 goto done; 2138 } 2139 len = sizeof(ohci_devd); 2140 ptr = (const void *)&ohci_devd; 2141 break; 2142 2143 case UDESC_CONFIG: 2144 if ((value & 0xff) != 0) { 2145 err = USB_ERR_IOERROR; 2146 goto done; 2147 } 2148 len = sizeof(ohci_confd); 2149 ptr = (const void *)&ohci_confd; 2150 break; 2151 2152 case UDESC_STRING: 2153 switch (value & 0xff) { 2154 case 0: /* Language table */ 2155 str_ptr = "\001"; 2156 break; 2157 2158 case 1: /* Vendor */ 2159 str_ptr = sc->sc_vendor; 2160 break; 2161 2162 case 2: /* Product */ 2163 str_ptr = "OHCI root HUB"; 2164 break; 2165 2166 default: 2167 str_ptr = ""; 2168 break; 2169 } 2170 2171 len = usb_make_str_desc( 2172 sc->sc_hub_desc.temp, 2173 sizeof(sc->sc_hub_desc.temp), 2174 str_ptr); 2175 break; 2176 2177 default: 2178 err = USB_ERR_IOERROR; 2179 goto done; 2180 } 2181 break; 2182 case C(UR_GET_INTERFACE, UT_READ_INTERFACE): 2183 len = 1; 2184 sc->sc_hub_desc.temp[0] = 0; 2185 break; 2186 case C(UR_GET_STATUS, UT_READ_DEVICE): 2187 len = 2; 2188 USETW(sc->sc_hub_desc.stat.wStatus, UDS_SELF_POWERED); 2189 break; 2190 case C(UR_GET_STATUS, UT_READ_INTERFACE): 2191 case C(UR_GET_STATUS, UT_READ_ENDPOINT): 2192 len = 2; 2193 USETW(sc->sc_hub_desc.stat.wStatus, 0); 2194 break; 2195 case C(UR_SET_ADDRESS, UT_WRITE_DEVICE): 2196 if (value >= OHCI_MAX_DEVICES) { 2197 err = USB_ERR_IOERROR; 2198 goto done; 2199 } 2200 sc->sc_addr = value; 2201 break; 2202 case C(UR_SET_CONFIG, UT_WRITE_DEVICE): 2203 if ((value != 0) && (value != 1)) { 2204 err = USB_ERR_IOERROR; 2205 goto done; 2206 } 2207 sc->sc_conf = value; 2208 break; 2209 case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE): 2210 break; 2211 case C(UR_SET_FEATURE, UT_WRITE_DEVICE): 2212 case C(UR_SET_FEATURE, UT_WRITE_INTERFACE): 2213 case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT): 2214 err = USB_ERR_IOERROR; 2215 goto done; 2216 case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE): 2217 break; 2218 case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT): 2219 break; 2220 /* Hub requests */ 2221 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE): 2222 break; 2223 case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER): 2224 DPRINTFN(9, "UR_CLEAR_PORT_FEATURE " 2225 "port=%d feature=%d\n", 2226 index, value); 2227 if ((index < 1) || 2228 (index > sc->sc_noport)) { 2229 err = USB_ERR_IOERROR; 2230 goto done; 2231 } 2232 port = OHCI_RH_PORT_STATUS(index); 2233 switch (value) { 2234 case UHF_PORT_ENABLE: 2235 OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS); 2236 break; 2237 case UHF_PORT_SUSPEND: 2238 OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR); 2239 break; 2240 case UHF_PORT_POWER: 2241 /* Yes, writing to the LOW_SPEED bit clears power. */ 2242 OWRITE4(sc, port, UPS_LOW_SPEED); 2243 break; 2244 case UHF_C_PORT_CONNECTION: 2245 OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16); 2246 break; 2247 case UHF_C_PORT_ENABLE: 2248 OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16); 2249 break; 2250 case UHF_C_PORT_SUSPEND: 2251 OWRITE4(sc, port, UPS_C_SUSPEND << 16); 2252 break; 2253 case UHF_C_PORT_OVER_CURRENT: 2254 OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16); 2255 break; 2256 case UHF_C_PORT_RESET: 2257 OWRITE4(sc, port, UPS_C_PORT_RESET << 16); 2258 break; 2259 default: 2260 err = USB_ERR_IOERROR; 2261 goto done; 2262 } 2263 switch (value) { 2264 case UHF_C_PORT_CONNECTION: 2265 case UHF_C_PORT_ENABLE: 2266 case UHF_C_PORT_SUSPEND: 2267 case UHF_C_PORT_OVER_CURRENT: 2268 case UHF_C_PORT_RESET: 2269 /* enable RHSC interrupt if condition is cleared. */ 2270 if ((OREAD4(sc, port) >> 16) == 0) 2271 ohci_rhsc_enable(sc); 2272 break; 2273 default: 2274 break; 2275 } 2276 break; 2277 case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE): 2278 if ((value & 0xff) != 0) { 2279 err = USB_ERR_IOERROR; 2280 goto done; 2281 } 2282 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A); 2283 2284 sc->sc_hub_desc.hubd = ohci_hubd; 2285 sc->sc_hub_desc.hubd.bNbrPorts = sc->sc_noport; 2286 USETW(sc->sc_hub_desc.hubd.wHubCharacteristics, 2287 (v & OHCI_NPS ? UHD_PWR_NO_SWITCH : 2288 v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL) 2289 /* XXX overcurrent */ 2290 ); 2291 sc->sc_hub_desc.hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v); 2292 v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B); 2293 2294 for (l = 0; l < sc->sc_noport; l++) { 2295 if (v & 1) { 2296 sc->sc_hub_desc.hubd.DeviceRemovable[l / 8] |= (1 << (l % 8)); 2297 } 2298 v >>= 1; 2299 } 2300 sc->sc_hub_desc.hubd.bDescLength = 2301 8 + ((sc->sc_noport + 7) / 8); 2302 len = sc->sc_hub_desc.hubd.bDescLength; 2303 break; 2304 2305 case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE): 2306 len = 16; 2307 memset(sc->sc_hub_desc.temp, 0, 16); 2308 break; 2309 case C(UR_GET_STATUS, UT_READ_CLASS_OTHER): 2310 DPRINTFN(9, "get port status i=%d\n", 2311 index); 2312 if ((index < 1) || 2313 (index > sc->sc_noport)) { 2314 err = USB_ERR_IOERROR; 2315 goto done; 2316 } 2317 v = OREAD4(sc, OHCI_RH_PORT_STATUS(index)); 2318 DPRINTFN(9, "port status=0x%04x\n", v); 2319 v &= ~UPS_PORT_MODE_DEVICE; /* force host mode */ 2320 USETW(sc->sc_hub_desc.ps.wPortStatus, v); 2321 USETW(sc->sc_hub_desc.ps.wPortChange, v >> 16); 2322 len = sizeof(sc->sc_hub_desc.ps); 2323 break; 2324 case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE): 2325 err = USB_ERR_IOERROR; 2326 goto done; 2327 case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE): 2328 break; 2329 case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER): 2330 if ((index < 1) || 2331 (index > sc->sc_noport)) { 2332 err = USB_ERR_IOERROR; 2333 goto done; 2334 } 2335 port = OHCI_RH_PORT_STATUS(index); 2336 switch (value) { 2337 case UHF_PORT_ENABLE: 2338 OWRITE4(sc, port, UPS_PORT_ENABLED); 2339 break; 2340 case UHF_PORT_SUSPEND: 2341 OWRITE4(sc, port, UPS_SUSPEND); 2342 break; 2343 case UHF_PORT_RESET: 2344 DPRINTFN(6, "reset port %d\n", index); 2345 OWRITE4(sc, port, UPS_RESET); 2346 for (v = 0;; v++) { 2347 if (v < 12) { 2348 usb_pause_mtx(&sc->sc_bus.bus_mtx, 2349 USB_MS_TO_TICKS(usb_port_root_reset_delay)); 2350 2351 if ((OREAD4(sc, port) & UPS_RESET) == 0) { 2352 break; 2353 } 2354 } else { 2355 err = USB_ERR_TIMEOUT; 2356 goto done; 2357 } 2358 } 2359 DPRINTFN(9, "ohci port %d reset, status = 0x%04x\n", 2360 index, OREAD4(sc, port)); 2361 break; 2362 case UHF_PORT_POWER: 2363 DPRINTFN(3, "set port power %d\n", index); 2364 OWRITE4(sc, port, UPS_PORT_POWER); 2365 break; 2366 default: 2367 err = USB_ERR_IOERROR; 2368 goto done; 2369 } 2370 break; 2371 default: 2372 err = USB_ERR_IOERROR; 2373 goto done; 2374 } 2375 done: 2376 *plength = len; 2377 *pptr = ptr; 2378 return (err); 2379 } 2380 2381 static void 2382 ohci_xfer_setup(struct usb_setup_params *parm) 2383 { 2384 struct usb_page_search page_info; 2385 struct usb_page_cache *pc; 2386 ohci_softc_t *sc; 2387 struct usb_xfer *xfer; 2388 void *last_obj; 2389 uint32_t ntd; 2390 uint32_t nitd; 2391 uint32_t nqh; 2392 uint32_t n; 2393 2394 sc = OHCI_BUS2SC(parm->udev->bus); 2395 xfer = parm->curr_xfer; 2396 2397 parm->hc_max_packet_size = 0x500; 2398 parm->hc_max_packet_count = 1; 2399 parm->hc_max_frame_size = OHCI_PAGE_SIZE; 2400 2401 /* 2402 * calculate ntd and nqh 2403 */ 2404 if (parm->methods == &ohci_device_ctrl_methods) { 2405 xfer->flags_int.bdma_enable = 1; 2406 2407 usbd_transfer_setup_sub(parm); 2408 2409 nitd = 0; 2410 ntd = ((2 * xfer->nframes) + 1 /* STATUS */ 2411 + (xfer->max_data_length / xfer->max_hc_frame_size)); 2412 nqh = 1; 2413 2414 } else if (parm->methods == &ohci_device_bulk_methods) { 2415 xfer->flags_int.bdma_enable = 1; 2416 2417 usbd_transfer_setup_sub(parm); 2418 2419 nitd = 0; 2420 ntd = ((2 * xfer->nframes) 2421 + (xfer->max_data_length / xfer->max_hc_frame_size)); 2422 nqh = 1; 2423 2424 } else if (parm->methods == &ohci_device_intr_methods) { 2425 xfer->flags_int.bdma_enable = 1; 2426 2427 usbd_transfer_setup_sub(parm); 2428 2429 nitd = 0; 2430 ntd = ((2 * xfer->nframes) 2431 + (xfer->max_data_length / xfer->max_hc_frame_size)); 2432 nqh = 1; 2433 2434 } else if (parm->methods == &ohci_device_isoc_methods) { 2435 xfer->flags_int.bdma_enable = 1; 2436 2437 usbd_transfer_setup_sub(parm); 2438 2439 nitd = ((xfer->max_data_length / OHCI_PAGE_SIZE) + 2440 howmany(xfer->nframes, OHCI_ITD_NOFFSET) + 2441 1 /* EXTRA */ ); 2442 ntd = 0; 2443 nqh = 1; 2444 2445 } else { 2446 2447 usbd_transfer_setup_sub(parm); 2448 2449 nitd = 0; 2450 ntd = 0; 2451 nqh = 0; 2452 } 2453 2454 alloc_dma_set: 2455 2456 if (parm->err) { 2457 return; 2458 } 2459 last_obj = NULL; 2460 2461 if (usbd_transfer_setup_sub_malloc( 2462 parm, &pc, sizeof(ohci_td_t), 2463 OHCI_TD_ALIGN, ntd)) { 2464 parm->err = USB_ERR_NOMEM; 2465 return; 2466 } 2467 if (parm->buf) { 2468 for (n = 0; n != ntd; n++) { 2469 ohci_td_t *td; 2470 2471 usbd_get_page(pc + n, 0, &page_info); 2472 2473 td = page_info.buffer; 2474 2475 /* init TD */ 2476 td->td_self = htole32(page_info.physaddr); 2477 td->obj_next = last_obj; 2478 td->page_cache = pc + n; 2479 2480 last_obj = td; 2481 2482 usb_pc_cpu_flush(pc + n); 2483 } 2484 } 2485 if (usbd_transfer_setup_sub_malloc( 2486 parm, &pc, sizeof(ohci_itd_t), 2487 OHCI_ITD_ALIGN, nitd)) { 2488 parm->err = USB_ERR_NOMEM; 2489 return; 2490 } 2491 if (parm->buf) { 2492 for (n = 0; n != nitd; n++) { 2493 ohci_itd_t *itd; 2494 2495 usbd_get_page(pc + n, 0, &page_info); 2496 2497 itd = page_info.buffer; 2498 2499 /* init TD */ 2500 itd->itd_self = htole32(page_info.physaddr); 2501 itd->obj_next = last_obj; 2502 itd->page_cache = pc + n; 2503 2504 last_obj = itd; 2505 2506 usb_pc_cpu_flush(pc + n); 2507 } 2508 } 2509 xfer->td_start[xfer->flags_int.curr_dma_set] = last_obj; 2510 2511 last_obj = NULL; 2512 2513 if (usbd_transfer_setup_sub_malloc( 2514 parm, &pc, sizeof(ohci_ed_t), 2515 OHCI_ED_ALIGN, nqh)) { 2516 parm->err = USB_ERR_NOMEM; 2517 return; 2518 } 2519 if (parm->buf) { 2520 for (n = 0; n != nqh; n++) { 2521 ohci_ed_t *ed; 2522 2523 usbd_get_page(pc + n, 0, &page_info); 2524 2525 ed = page_info.buffer; 2526 2527 /* init QH */ 2528 ed->ed_self = htole32(page_info.physaddr); 2529 ed->obj_next = last_obj; 2530 ed->page_cache = pc + n; 2531 2532 last_obj = ed; 2533 2534 usb_pc_cpu_flush(pc + n); 2535 } 2536 } 2537 xfer->qh_start[xfer->flags_int.curr_dma_set] = last_obj; 2538 2539 if (!xfer->flags_int.curr_dma_set) { 2540 xfer->flags_int.curr_dma_set = 1; 2541 goto alloc_dma_set; 2542 } 2543 } 2544 2545 static void 2546 ohci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, 2547 struct usb_endpoint *ep) 2548 { 2549 ohci_softc_t *sc = OHCI_BUS2SC(udev->bus); 2550 2551 DPRINTFN(2, "endpoint=%p, addr=%d, endpt=%d, mode=%d (%d)\n", 2552 ep, udev->address, 2553 edesc->bEndpointAddress, udev->flags.usb_mode, 2554 sc->sc_addr); 2555 2556 if (udev->device_index != sc->sc_addr) { 2557 switch (edesc->bmAttributes & UE_XFERTYPE) { 2558 case UE_CONTROL: 2559 ep->methods = &ohci_device_ctrl_methods; 2560 break; 2561 case UE_INTERRUPT: 2562 ep->methods = &ohci_device_intr_methods; 2563 break; 2564 case UE_ISOCHRONOUS: 2565 if (udev->speed == USB_SPEED_FULL) { 2566 ep->methods = &ohci_device_isoc_methods; 2567 } 2568 break; 2569 case UE_BULK: 2570 ep->methods = &ohci_device_bulk_methods; 2571 break; 2572 default: 2573 /* do nothing */ 2574 break; 2575 } 2576 } 2577 } 2578 2579 static void 2580 ohci_xfer_unsetup(struct usb_xfer *xfer) 2581 { 2582 return; 2583 } 2584 2585 static void 2586 ohci_get_dma_delay(struct usb_device *udev, uint32_t *pus) 2587 { 2588 /* 2589 * Wait until hardware has finished any possible use of the 2590 * transfer descriptor(s) and QH 2591 */ 2592 *pus = (1125); /* microseconds */ 2593 } 2594 2595 static void 2596 ohci_device_resume(struct usb_device *udev) 2597 { 2598 struct ohci_softc *sc = OHCI_BUS2SC(udev->bus); 2599 struct usb_xfer *xfer; 2600 const struct usb_pipe_methods *methods; 2601 ohci_ed_t *ed; 2602 2603 DPRINTF("\n"); 2604 2605 USB_BUS_LOCK(udev->bus); 2606 2607 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 2608 2609 if (xfer->xroot->udev == udev) { 2610 2611 methods = xfer->endpoint->methods; 2612 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 2613 2614 if (methods == &ohci_device_bulk_methods) { 2615 OHCI_APPEND_QH(ed, sc->sc_bulk_p_last); 2616 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF); 2617 } 2618 if (methods == &ohci_device_ctrl_methods) { 2619 OHCI_APPEND_QH(ed, sc->sc_ctrl_p_last); 2620 OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF); 2621 } 2622 if (methods == &ohci_device_intr_methods) { 2623 OHCI_APPEND_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); 2624 } 2625 } 2626 } 2627 2628 USB_BUS_UNLOCK(udev->bus); 2629 2630 return; 2631 } 2632 2633 static void 2634 ohci_device_suspend(struct usb_device *udev) 2635 { 2636 struct ohci_softc *sc = OHCI_BUS2SC(udev->bus); 2637 struct usb_xfer *xfer; 2638 const struct usb_pipe_methods *methods; 2639 ohci_ed_t *ed; 2640 2641 DPRINTF("\n"); 2642 2643 USB_BUS_LOCK(udev->bus); 2644 2645 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 2646 2647 if (xfer->xroot->udev == udev) { 2648 2649 methods = xfer->endpoint->methods; 2650 ed = xfer->qh_start[xfer->flags_int.curr_dma_set]; 2651 2652 if (methods == &ohci_device_bulk_methods) { 2653 OHCI_REMOVE_QH(ed, sc->sc_bulk_p_last); 2654 } 2655 if (methods == &ohci_device_ctrl_methods) { 2656 OHCI_REMOVE_QH(ed, sc->sc_ctrl_p_last); 2657 } 2658 if (methods == &ohci_device_intr_methods) { 2659 OHCI_REMOVE_QH(ed, sc->sc_intr_p_last[xfer->qh_pos]); 2660 } 2661 } 2662 } 2663 2664 USB_BUS_UNLOCK(udev->bus); 2665 2666 return; 2667 } 2668 2669 static void 2670 ohci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) 2671 { 2672 struct ohci_softc *sc = OHCI_BUS2SC(bus); 2673 2674 switch (state) { 2675 case USB_HW_POWER_SUSPEND: 2676 case USB_HW_POWER_SHUTDOWN: 2677 ohci_suspend(sc); 2678 break; 2679 case USB_HW_POWER_RESUME: 2680 ohci_resume(sc); 2681 break; 2682 default: 2683 break; 2684 } 2685 } 2686 2687 static void 2688 ohci_set_hw_power(struct usb_bus *bus) 2689 { 2690 struct ohci_softc *sc = OHCI_BUS2SC(bus); 2691 uint32_t temp; 2692 uint32_t flags; 2693 2694 DPRINTF("\n"); 2695 2696 USB_BUS_LOCK(bus); 2697 2698 flags = bus->hw_power_state; 2699 2700 temp = OREAD4(sc, OHCI_CONTROL); 2701 temp &= ~(OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE); 2702 2703 if (flags & USB_HW_POWER_CONTROL) 2704 temp |= OHCI_CLE; 2705 2706 if (flags & USB_HW_POWER_BULK) 2707 temp |= OHCI_BLE; 2708 2709 if (flags & USB_HW_POWER_INTERRUPT) 2710 temp |= OHCI_PLE; 2711 2712 if (flags & USB_HW_POWER_ISOC) 2713 temp |= OHCI_IE | OHCI_PLE; 2714 2715 OWRITE4(sc, OHCI_CONTROL, temp); 2716 2717 USB_BUS_UNLOCK(bus); 2718 2719 return; 2720 } 2721 2722 static const struct usb_bus_methods ohci_bus_methods = 2723 { 2724 .endpoint_init = ohci_ep_init, 2725 .xfer_setup = ohci_xfer_setup, 2726 .xfer_unsetup = ohci_xfer_unsetup, 2727 .get_dma_delay = ohci_get_dma_delay, 2728 .device_resume = ohci_device_resume, 2729 .device_suspend = ohci_device_suspend, 2730 .set_hw_power = ohci_set_hw_power, 2731 .set_hw_power_sleep = ohci_set_hw_power_sleep, 2732 .roothub_exec = ohci_roothub_exec, 2733 .xfer_poll = ohci_do_poll, 2734 }; 2735