1 /* $FreeBSD$ */ 2 /*- 3 * SPDX-License-Identifier: BSD-2-Clause 4 * 5 * Copyright (c) 2001 The NetBSD Foundation, Inc. 6 * All rights reserved. 7 * 8 * This code is derived from software contributed to The NetBSD Foundation 9 * by Lennart Augustsson (lennart@augustsson.net). 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 21 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 22 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 23 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 * POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #ifndef _EHCIREG_H_ 34 #define _EHCIREG_H_ 35 36 /* PCI config registers */ 37 #define PCI_CBMEM 0x10 /* configuration base MEM */ 38 #define PCI_INTERFACE_EHCI 0x20 39 #define PCI_USBREV 0x60 /* RO USB protocol revision */ 40 #define PCI_USB_REV_MASK 0xff 41 #define PCI_USB_REV_PRE_1_0 0x00 42 #define PCI_USB_REV_1_0 0x10 43 #define PCI_USB_REV_1_1 0x11 44 #define PCI_USB_REV_2_0 0x20 45 #define PCI_EHCI_FLADJ 0x61 /* RW Frame len adj, SOF=59488+6*fladj */ 46 #define PCI_EHCI_PORTWAKECAP 0x62 /* RW Port wake caps (opt) */ 47 48 /* EHCI Extended Capabilities */ 49 #define EHCI_EC_LEGSUP 0x01 50 #define EHCI_EECP_NEXT(x) (((x) >> 8) & 0xff) 51 #define EHCI_EECP_ID(x) ((x) & 0xff) 52 53 /* Legacy support extended capability */ 54 #define EHCI_LEGSUP_BIOS_SEM 0x02 55 #define EHCI_LEGSUP_OS_SEM 0x03 56 #define EHCI_LEGSUP_USBLEGCTLSTS 0x04 57 58 /* EHCI capability registers */ 59 #define EHCI_CAPLEN_HCIVERSION 0x00 /* RO Capability register length 60 * (least-significant byte) and 61 * interface version number (two 62 * most significant) 63 */ 64 #define EHCI_CAPLENGTH(x) ((x) & 0xff) 65 #define EHCI_HCIVERSION(x) (((x) >> 16) & 0xffff) 66 #define EHCI_HCSPARAMS 0x04 /* RO Structural parameters */ 67 #define EHCI_HCS_DEBUGPORT(x) (((x) >> 20) & 0xf) 68 #define EHCI_HCS_P_INDICATOR(x) ((x) & 0x10000) 69 #define EHCI_HCS_N_CC(x) (((x) >> 12) & 0xf) /* # of companion ctlrs */ 70 #define EHCI_HCS_N_PCC(x) (((x) >> 8) & 0xf) /* # of ports per comp. */ 71 #define EHCI_HCS_PPC(x) ((x) & 0x10) /* port power control */ 72 #define EHCI_HCS_N_PORTS(x) ((x) & 0xf) /* # of ports */ 73 #define EHCI_HCCPARAMS 0x08 /* RO Capability parameters */ 74 #define EHCI_HCC_EECP(x) (((x) >> 8) & 0xff) /* extended ports caps */ 75 #define EHCI_HCC_IST(x) (((x) >> 4) & 0xf) /* isoc sched threshold */ 76 #define EHCI_HCC_ASPC(x) ((x) & 0x4) /* async sched park cap */ 77 #define EHCI_HCC_PFLF(x) ((x) & 0x2) /* prog frame list flag */ 78 #define EHCI_HCC_64BIT(x) ((x) & 0x1) /* 64 bit address cap */ 79 #define EHCI_HCSP_PORTROUTE 0x0c /* RO Companion port route description */ 80 81 /* EHCI operational registers. Offset given by EHCI_CAPLENGTH register */ 82 #define EHCI_USBCMD 0x00 /* RO, RW, WO Command register */ 83 #define EHCI_CMD_ITC_M 0x00ff0000 /* RW interrupt threshold ctrl */ 84 #define EHCI_CMD_ITC_1 0x00010000 85 #define EHCI_CMD_ITC_2 0x00020000 86 #define EHCI_CMD_ITC_4 0x00040000 87 #define EHCI_CMD_ITC_8 0x00080000 88 #define EHCI_CMD_ITC_16 0x00100000 89 #define EHCI_CMD_ITC_32 0x00200000 90 #define EHCI_CMD_ITC_64 0x00400000 91 #define EHCI_CMD_ASPME 0x00000800 /* RW/RO async park enable */ 92 #define EHCI_CMD_ASPMC 0x00000300 /* RW/RO async park count */ 93 #define EHCI_CMD_LHCR 0x00000080 /* RW light host ctrl reset */ 94 #define EHCI_CMD_IAAD 0x00000040 /* RW intr on async adv door 95 * bell */ 96 #define EHCI_CMD_ASE 0x00000020 /* RW async sched enable */ 97 #define EHCI_CMD_PSE 0x00000010 /* RW periodic sched enable */ 98 #define EHCI_CMD_FLS_M 0x0000000c /* RW/RO frame list size */ 99 #define EHCI_CMD_FLS(x) (((x) >> 2) & 3) /* RW/RO frame list size */ 100 #define EHCI_CMD_HCRESET 0x00000002 /* RW reset */ 101 #define EHCI_CMD_RS 0x00000001 /* RW run/stop */ 102 #define EHCI_USBSTS 0x04 /* RO, RW, RWC Status register */ 103 #define EHCI_STS_ASS 0x00008000 /* RO async sched status */ 104 #define EHCI_STS_PSS 0x00004000 /* RO periodic sched status */ 105 #define EHCI_STS_REC 0x00002000 /* RO reclamation */ 106 #define EHCI_STS_HCH 0x00001000 /* RO host controller halted */ 107 #define EHCI_STS_IAA 0x00000020 /* RWC interrupt on async adv */ 108 #define EHCI_STS_HSE 0x00000010 /* RWC host system error */ 109 #define EHCI_STS_FLR 0x00000008 /* RWC frame list rollover */ 110 #define EHCI_STS_PCD 0x00000004 /* RWC port change detect */ 111 #define EHCI_STS_ERRINT 0x00000002 /* RWC error interrupt */ 112 #define EHCI_STS_INT 0x00000001 /* RWC interrupt */ 113 #define EHCI_STS_INTRS(x) ((x) & 0x3f) 114 115 /* 116 * NOTE: the doorbell interrupt is enabled, but the doorbell is never 117 * used! SiS chipsets require this. 118 */ 119 #define EHCI_NORMAL_INTRS (EHCI_STS_IAA | EHCI_STS_HSE | \ 120 EHCI_STS_PCD | EHCI_STS_ERRINT | EHCI_STS_INT) 121 122 #define EHCI_USBINTR 0x08 /* RW Interrupt register */ 123 #define EHCI_INTR_IAAE 0x00000020 /* interrupt on async advance 124 * ena */ 125 #define EHCI_INTR_HSEE 0x00000010 /* host system error ena */ 126 #define EHCI_INTR_FLRE 0x00000008 /* frame list rollover ena */ 127 #define EHCI_INTR_PCIE 0x00000004 /* port change ena */ 128 #define EHCI_INTR_UEIE 0x00000002 /* USB error intr ena */ 129 #define EHCI_INTR_UIE 0x00000001 /* USB intr ena */ 130 131 #define EHCI_FRINDEX 0x0c /* RW Frame Index register */ 132 133 #define EHCI_CTRLDSSEGMENT 0x10 /* RW Control Data Structure Segment */ 134 135 #define EHCI_PERIODICLISTBASE 0x14 /* RW Periodic List Base */ 136 #define EHCI_ASYNCLISTADDR 0x18 /* RW Async List Base */ 137 138 #define EHCI_CONFIGFLAG 0x40 /* RW Configure Flag register */ 139 #define EHCI_CONF_CF 0x00000001 /* RW configure flag */ 140 141 #define EHCI_PORTSC(n) (0x40+(4*(n))) /* RO, RW, RWC Port Status reg */ 142 #define EHCI_PS_WKOC_E 0x00400000 /* RW wake on over current ena */ 143 #define EHCI_PS_WKDSCNNT_E 0x00200000 /* RW wake on disconnect ena */ 144 #define EHCI_PS_WKCNNT_E 0x00100000 /* RW wake on connect ena */ 145 #define EHCI_PS_PTC 0x000f0000 /* RW port test control */ 146 #define EHCI_PS_PIC 0x0000c000 /* RW port indicator control */ 147 #define EHCI_PS_PO 0x00002000 /* RW port owner */ 148 #define EHCI_PS_PP 0x00001000 /* RW,RO port power */ 149 #define EHCI_PS_LS 0x00000c00 /* RO line status */ 150 #define EHCI_PS_IS_LOWSPEED(x) (((x) & EHCI_PS_LS) == 0x00000400) 151 #define EHCI_PS_PR 0x00000100 /* RW port reset */ 152 #define EHCI_PS_SUSP 0x00000080 /* RW suspend */ 153 #define EHCI_PS_FPR 0x00000040 /* RW force port resume */ 154 #define EHCI_PS_OCC 0x00000020 /* RWC over current change */ 155 #define EHCI_PS_OCA 0x00000010 /* RO over current active */ 156 #define EHCI_PS_PEC 0x00000008 /* RWC port enable change */ 157 #define EHCI_PS_PE 0x00000004 /* RW port enable */ 158 #define EHCI_PS_CSC 0x00000002 /* RWC connect status change */ 159 #define EHCI_PS_CS 0x00000001 /* RO connect status */ 160 #define EHCI_PS_CLEAR (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC) 161 162 #define EHCI_PORT_RESET_COMPLETE 2 /* ms */ 163 164 /* 165 * Registers not covered by EHCI specification 166 * 167 * 168 * EHCI_USBMODE register offset is different for cores with LPM support, 169 * bits are equal 170 */ 171 #define EHCI_USBMODE_NOLPM 0x68 /* RW USB Device mode reg (no LPM) */ 172 #define EHCI_USBMODE_LPM 0xC8 /* RW USB Device mode reg (LPM) */ 173 #define EHCI_UM_CM 0x00000003 /* R/WO Controller Mode */ 174 #define EHCI_UM_CM_IDLE 0x0 /* Idle */ 175 #define EHCI_UM_CM_HOST 0x3 /* Host Controller */ 176 #define EHCI_UM_ES 0x00000004 /* R/WO Endian Select */ 177 #define EHCI_UM_ES_LE 0x0 /* Little-endian byte alignment */ 178 #define EHCI_UM_ES_BE 0x4 /* Big-endian byte alignment */ 179 #define EHCI_UM_SDIS 0x00000010 /* R/WO Stream Disable Mode */ 180 181 /* 182 * Actual port speed bits depends on EHCI_HOSTC(n) registers presence, 183 * speed encoding is equal 184 */ 185 #define EHCI_HOSTC(n) (0x80+(4*(n))) /* RO, RW Host mode control reg */ 186 #define EHCI_HOSTC_PSPD_SHIFT 25 187 #define EHCI_HOSTC_PSPD_MASK 0x3 188 189 #define EHCI_PORTSC_PSPD_SHIFT 26 190 #define EHCI_PORTSC_PSPD_MASK 0x3 191 192 #define EHCI_PORT_SPEED_FULL 0 193 #define EHCI_PORT_SPEED_LOW 1 194 #define EHCI_PORT_SPEED_HIGH 2 195 #endif /* _EHCIREG_H_ */ 196