1 #include <sys/cdefs.h> 2 __FBSDID("$FreeBSD$"); 3 4 /*- 5 * Copyright (c) 2009 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * This file contains the driver for the AVR32 series USB Device 31 * Controller 32 */ 33 34 /* 35 * NOTE: When the chip detects BUS-reset it will also reset the 36 * endpoints, Function-address and more. 37 */ 38 39 #include <sys/stdint.h> 40 #include <sys/stddef.h> 41 #include <sys/param.h> 42 #include <sys/queue.h> 43 #include <sys/types.h> 44 #include <sys/systm.h> 45 #include <sys/kernel.h> 46 #include <sys/bus.h> 47 #include <sys/module.h> 48 #include <sys/lock.h> 49 #include <sys/mutex.h> 50 #include <sys/condvar.h> 51 #include <sys/sysctl.h> 52 #include <sys/sx.h> 53 #include <sys/unistd.h> 54 #include <sys/callout.h> 55 #include <sys/malloc.h> 56 #include <sys/priv.h> 57 58 #include <dev/usb/usb.h> 59 #include <dev/usb/usbdi.h> 60 61 #define USB_DEBUG_VAR avr32dci_debug 62 63 #include <dev/usb/usb_core.h> 64 #include <dev/usb/usb_debug.h> 65 #include <dev/usb/usb_busdma.h> 66 #include <dev/usb/usb_process.h> 67 #include <dev/usb/usb_transfer.h> 68 #include <dev/usb/usb_device.h> 69 #include <dev/usb/usb_hub.h> 70 #include <dev/usb/usb_util.h> 71 72 #include <dev/usb/usb_controller.h> 73 #include <dev/usb/usb_bus.h> 74 #include <dev/usb/controller/avr32dci.h> 75 76 #define AVR32_BUS2SC(bus) \ 77 ((struct avr32dci_softc *)(((uint8_t *)(bus)) - \ 78 ((uint8_t *)&(((struct avr32dci_softc *)0)->sc_bus)))) 79 80 #define AVR32_PC2SC(pc) \ 81 AVR32_BUS2SC(USB_DMATAG_TO_XROOT((pc)->tag_parent)->bus) 82 83 #ifdef USB_DEBUG 84 static int avr32dci_debug = 0; 85 86 static SYSCTL_NODE(_hw_usb, OID_AUTO, avr32dci, CTLFLAG_RW, 0, "USB AVR32 DCI"); 87 SYSCTL_INT(_hw_usb_avr32dci, OID_AUTO, debug, CTLFLAG_RW, 88 &avr32dci_debug, 0, "AVR32 DCI debug level"); 89 #endif 90 91 #define AVR32_INTR_ENDPT 1 92 93 /* prototypes */ 94 95 struct usb_bus_methods avr32dci_bus_methods; 96 struct usb_pipe_methods avr32dci_device_non_isoc_methods; 97 struct usb_pipe_methods avr32dci_device_isoc_fs_methods; 98 99 static avr32dci_cmd_t avr32dci_setup_rx; 100 static avr32dci_cmd_t avr32dci_data_rx; 101 static avr32dci_cmd_t avr32dci_data_tx; 102 static avr32dci_cmd_t avr32dci_data_tx_sync; 103 static void avr32dci_device_done(struct usb_xfer *, usb_error_t); 104 static void avr32dci_do_poll(struct usb_bus *); 105 static void avr32dci_standard_done(struct usb_xfer *); 106 static void avr32dci_root_intr(struct avr32dci_softc *sc); 107 108 /* 109 * Here is a list of what the chip supports: 110 */ 111 static const struct usb_hw_ep_profile 112 avr32dci_ep_profile[4] = { 113 114 [0] = { 115 .max_in_frame_size = 64, 116 .max_out_frame_size = 64, 117 .is_simplex = 1, 118 .support_control = 1, 119 }, 120 121 [1] = { 122 .max_in_frame_size = 512, 123 .max_out_frame_size = 512, 124 .is_simplex = 1, 125 .support_bulk = 1, 126 .support_interrupt = 1, 127 .support_isochronous = 1, 128 .support_in = 1, 129 .support_out = 1, 130 }, 131 132 [2] = { 133 .max_in_frame_size = 64, 134 .max_out_frame_size = 64, 135 .is_simplex = 1, 136 .support_bulk = 1, 137 .support_interrupt = 1, 138 .support_in = 1, 139 .support_out = 1, 140 }, 141 142 [3] = { 143 .max_in_frame_size = 1024, 144 .max_out_frame_size = 1024, 145 .is_simplex = 1, 146 .support_bulk = 1, 147 .support_interrupt = 1, 148 .support_isochronous = 1, 149 .support_in = 1, 150 .support_out = 1, 151 }, 152 }; 153 154 static void 155 avr32dci_get_hw_ep_profile(struct usb_device *udev, 156 const struct usb_hw_ep_profile **ppf, uint8_t ep_addr) 157 { 158 if (ep_addr == 0) 159 *ppf = avr32dci_ep_profile; 160 else if (ep_addr < 3) 161 *ppf = avr32dci_ep_profile + 1; 162 else if (ep_addr < 5) 163 *ppf = avr32dci_ep_profile + 2; 164 else if (ep_addr < 7) 165 *ppf = avr32dci_ep_profile + 3; 166 else 167 *ppf = NULL; 168 } 169 170 static void 171 avr32dci_mod_ctrl(struct avr32dci_softc *sc, uint32_t set, uint32_t clear) 172 { 173 uint32_t temp; 174 175 temp = AVR32_READ_4(sc, AVR32_CTRL); 176 temp |= set; 177 temp &= ~clear; 178 AVR32_WRITE_4(sc, AVR32_CTRL, temp); 179 } 180 181 static void 182 avr32dci_mod_ien(struct avr32dci_softc *sc, uint32_t set, uint32_t clear) 183 { 184 uint32_t temp; 185 186 temp = AVR32_READ_4(sc, AVR32_IEN); 187 temp |= set; 188 temp &= ~clear; 189 AVR32_WRITE_4(sc, AVR32_IEN, temp); 190 } 191 192 static void 193 avr32dci_clocks_on(struct avr32dci_softc *sc) 194 { 195 if (sc->sc_flags.clocks_off && 196 sc->sc_flags.port_powered) { 197 198 DPRINTFN(5, "\n"); 199 200 /* turn on clocks */ 201 (sc->sc_clocks_on) (&sc->sc_bus); 202 203 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_EN_USBA, 0); 204 205 sc->sc_flags.clocks_off = 0; 206 } 207 } 208 209 static void 210 avr32dci_clocks_off(struct avr32dci_softc *sc) 211 { 212 if (!sc->sc_flags.clocks_off) { 213 214 DPRINTFN(5, "\n"); 215 216 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_EN_USBA); 217 218 /* turn clocks off */ 219 (sc->sc_clocks_off) (&sc->sc_bus); 220 221 sc->sc_flags.clocks_off = 1; 222 } 223 } 224 225 static void 226 avr32dci_pull_up(struct avr32dci_softc *sc) 227 { 228 /* pullup D+, if possible */ 229 230 if (!sc->sc_flags.d_pulled_up && 231 sc->sc_flags.port_powered) { 232 sc->sc_flags.d_pulled_up = 1; 233 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_DETACH); 234 } 235 } 236 237 static void 238 avr32dci_pull_down(struct avr32dci_softc *sc) 239 { 240 /* pulldown D+, if possible */ 241 242 if (sc->sc_flags.d_pulled_up) { 243 sc->sc_flags.d_pulled_up = 0; 244 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_DETACH, 0); 245 } 246 } 247 248 static void 249 avr32dci_wakeup_peer(struct avr32dci_softc *sc) 250 { 251 if (!sc->sc_flags.status_suspend) { 252 return; 253 } 254 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_REWAKEUP, 0); 255 256 /* wait 8 milliseconds */ 257 /* Wait for reset to complete. */ 258 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 125); 259 260 /* hardware should have cleared RMWKUP bit */ 261 } 262 263 static void 264 avr32dci_set_address(struct avr32dci_softc *sc, uint8_t addr) 265 { 266 DPRINTFN(5, "addr=%d\n", addr); 267 268 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_FADDR_EN | addr, 0); 269 } 270 271 static uint8_t 272 avr32dci_setup_rx(struct avr32dci_td *td) 273 { 274 struct avr32dci_softc *sc; 275 struct usb_device_request req; 276 uint16_t count; 277 uint32_t temp; 278 279 /* get pointer to softc */ 280 sc = AVR32_PC2SC(td->pc); 281 282 /* check endpoint status */ 283 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no)); 284 285 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp); 286 287 if (!(temp & AVR32_EPTSTA_RX_SETUP)) { 288 goto not_complete; 289 } 290 /* clear did stall */ 291 td->did_stall = 0; 292 /* get the packet byte count */ 293 count = AVR32_EPTSTA_BYTE_COUNT(temp); 294 295 /* verify data length */ 296 if (count != td->remainder) { 297 DPRINTFN(0, "Invalid SETUP packet " 298 "length, %d bytes\n", count); 299 goto not_complete; 300 } 301 if (count != sizeof(req)) { 302 DPRINTFN(0, "Unsupported SETUP packet " 303 "length, %d bytes\n", count); 304 goto not_complete; 305 } 306 /* receive data */ 307 memcpy(&req, sc->physdata, sizeof(req)); 308 309 /* copy data into real buffer */ 310 usbd_copy_in(td->pc, 0, &req, sizeof(req)); 311 312 td->offset = sizeof(req); 313 td->remainder = 0; 314 315 /* sneak peek the set address */ 316 if ((req.bmRequestType == UT_WRITE_DEVICE) && 317 (req.bRequest == UR_SET_ADDRESS)) { 318 sc->sc_dv_addr = req.wValue[0] & 0x7F; 319 /* must write address before ZLP */ 320 avr32dci_mod_ctrl(sc, 0, AVR32_CTRL_DEV_FADDR_EN | 321 AVR32_CTRL_DEV_ADDR); 322 avr32dci_mod_ctrl(sc, sc->sc_dv_addr, 0); 323 } else { 324 sc->sc_dv_addr = 0xFF; 325 } 326 327 /* clear SETUP packet interrupt */ 328 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_SETUP); 329 return (0); /* complete */ 330 331 not_complete: 332 if (temp & AVR32_EPTSTA_RX_SETUP) { 333 /* clear SETUP packet interrupt */ 334 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_SETUP); 335 } 336 /* abort any ongoing transfer */ 337 if (!td->did_stall) { 338 DPRINTFN(5, "stalling\n"); 339 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(td->ep_no), 340 AVR32_EPTSTA_FRCESTALL); 341 td->did_stall = 1; 342 } 343 return (1); /* not complete */ 344 } 345 346 static uint8_t 347 avr32dci_data_rx(struct avr32dci_td *td) 348 { 349 struct avr32dci_softc *sc; 350 struct usb_page_search buf_res; 351 uint16_t count; 352 uint32_t temp; 353 uint8_t to; 354 uint8_t got_short; 355 356 to = 4; /* don't loop forever! */ 357 got_short = 0; 358 359 /* get pointer to softc */ 360 sc = AVR32_PC2SC(td->pc); 361 362 repeat: 363 /* check if any of the FIFO banks have data */ 364 /* check endpoint status */ 365 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no)); 366 367 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp); 368 369 if (temp & AVR32_EPTSTA_RX_SETUP) { 370 if (td->remainder == 0) { 371 /* 372 * We are actually complete and have 373 * received the next SETUP 374 */ 375 DPRINTFN(5, "faking complete\n"); 376 return (0); /* complete */ 377 } 378 /* 379 * USB Host Aborted the transfer. 380 */ 381 td->error = 1; 382 return (0); /* complete */ 383 } 384 /* check status */ 385 if (!(temp & AVR32_EPTSTA_RX_BK_RDY)) { 386 /* no data */ 387 goto not_complete; 388 } 389 /* get the packet byte count */ 390 count = AVR32_EPTSTA_BYTE_COUNT(temp); 391 392 /* verify the packet byte count */ 393 if (count != td->max_packet_size) { 394 if (count < td->max_packet_size) { 395 /* we have a short packet */ 396 td->short_pkt = 1; 397 got_short = 1; 398 } else { 399 /* invalid USB packet */ 400 td->error = 1; 401 return (0); /* we are complete */ 402 } 403 } 404 /* verify the packet byte count */ 405 if (count > td->remainder) { 406 /* invalid USB packet */ 407 td->error = 1; 408 return (0); /* we are complete */ 409 } 410 while (count > 0) { 411 usbd_get_page(td->pc, td->offset, &buf_res); 412 413 /* get correct length */ 414 if (buf_res.length > count) { 415 buf_res.length = count; 416 } 417 /* receive data */ 418 memcpy(buf_res.buffer, sc->physdata + 419 (AVR32_EPTSTA_CURRENT_BANK(temp) << td->bank_shift) + 420 (td->ep_no << 16) + (td->offset % td->max_packet_size), buf_res.length); 421 /* update counters */ 422 count -= buf_res.length; 423 td->offset += buf_res.length; 424 td->remainder -= buf_res.length; 425 } 426 427 /* clear OUT packet interrupt */ 428 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(td->ep_no), AVR32_EPTSTA_RX_BK_RDY); 429 430 /* check if we are complete */ 431 if ((td->remainder == 0) || got_short) { 432 if (td->short_pkt) { 433 /* we are complete */ 434 return (0); 435 } 436 /* else need to receive a zero length packet */ 437 } 438 if (--to) { 439 goto repeat; 440 } 441 not_complete: 442 return (1); /* not complete */ 443 } 444 445 static uint8_t 446 avr32dci_data_tx(struct avr32dci_td *td) 447 { 448 struct avr32dci_softc *sc; 449 struct usb_page_search buf_res; 450 uint16_t count; 451 uint8_t to; 452 uint32_t temp; 453 454 to = 4; /* don't loop forever! */ 455 456 /* get pointer to softc */ 457 sc = AVR32_PC2SC(td->pc); 458 459 repeat: 460 461 /* check endpoint status */ 462 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no)); 463 464 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp); 465 466 if (temp & AVR32_EPTSTA_RX_SETUP) { 467 /* 468 * The current transfer was aborted 469 * by the USB Host 470 */ 471 td->error = 1; 472 return (0); /* complete */ 473 } 474 if (temp & AVR32_EPTSTA_TX_PK_RDY) { 475 /* cannot write any data - all banks are busy */ 476 goto not_complete; 477 } 478 count = td->max_packet_size; 479 if (td->remainder < count) { 480 /* we have a short packet */ 481 td->short_pkt = 1; 482 count = td->remainder; 483 } 484 while (count > 0) { 485 486 usbd_get_page(td->pc, td->offset, &buf_res); 487 488 /* get correct length */ 489 if (buf_res.length > count) { 490 buf_res.length = count; 491 } 492 /* transmit data */ 493 memcpy(sc->physdata + 494 (AVR32_EPTSTA_CURRENT_BANK(temp) << td->bank_shift) + 495 (td->ep_no << 16) + (td->offset % td->max_packet_size), 496 buf_res.buffer, buf_res.length); 497 /* update counters */ 498 count -= buf_res.length; 499 td->offset += buf_res.length; 500 td->remainder -= buf_res.length; 501 } 502 503 /* allocate FIFO bank */ 504 AVR32_WRITE_4(sc, AVR32_EPTCTL(td->ep_no), AVR32_EPTCTL_TX_PK_RDY); 505 506 /* check remainder */ 507 if (td->remainder == 0) { 508 if (td->short_pkt) { 509 return (0); /* complete */ 510 } 511 /* else we need to transmit a short packet */ 512 } 513 if (--to) { 514 goto repeat; 515 } 516 not_complete: 517 return (1); /* not complete */ 518 } 519 520 static uint8_t 521 avr32dci_data_tx_sync(struct avr32dci_td *td) 522 { 523 struct avr32dci_softc *sc; 524 uint32_t temp; 525 526 /* get pointer to softc */ 527 sc = AVR32_PC2SC(td->pc); 528 529 /* check endpoint status */ 530 temp = AVR32_READ_4(sc, AVR32_EPTSTA(td->ep_no)); 531 532 DPRINTFN(5, "EPTSTA(%u)=0x%08x\n", td->ep_no, temp); 533 534 if (temp & AVR32_EPTSTA_RX_SETUP) { 535 DPRINTFN(5, "faking complete\n"); 536 /* Race condition */ 537 return (0); /* complete */ 538 } 539 /* 540 * The control endpoint has only got one bank, so if that bank 541 * is free the packet has been transferred! 542 */ 543 if (AVR32_EPTSTA_BUSY_BANK_STA(temp) != 0) { 544 /* cannot write any data - a bank is busy */ 545 goto not_complete; 546 } 547 if (sc->sc_dv_addr != 0xFF) { 548 /* set new address */ 549 avr32dci_set_address(sc, sc->sc_dv_addr); 550 } 551 return (0); /* complete */ 552 553 not_complete: 554 return (1); /* not complete */ 555 } 556 557 static uint8_t 558 avr32dci_xfer_do_fifo(struct usb_xfer *xfer) 559 { 560 struct avr32dci_td *td; 561 562 DPRINTFN(9, "\n"); 563 564 td = xfer->td_transfer_cache; 565 while (1) { 566 if ((td->func) (td)) { 567 /* operation in progress */ 568 break; 569 } 570 if (((void *)td) == xfer->td_transfer_last) { 571 goto done; 572 } 573 if (td->error) { 574 goto done; 575 } else if (td->remainder > 0) { 576 /* 577 * We had a short transfer. If there is no alternate 578 * next, stop processing ! 579 */ 580 if (!td->alt_next) { 581 goto done; 582 } 583 } 584 /* 585 * Fetch the next transfer descriptor and transfer 586 * some flags to the next transfer descriptor 587 */ 588 td = td->obj_next; 589 xfer->td_transfer_cache = td; 590 } 591 return (1); /* not complete */ 592 593 done: 594 /* compute all actual lengths */ 595 596 avr32dci_standard_done(xfer); 597 return (0); /* complete */ 598 } 599 600 static void 601 avr32dci_interrupt_poll(struct avr32dci_softc *sc) 602 { 603 struct usb_xfer *xfer; 604 605 repeat: 606 TAILQ_FOREACH(xfer, &sc->sc_bus.intr_q.head, wait_entry) { 607 if (!avr32dci_xfer_do_fifo(xfer)) { 608 /* queue has been modified */ 609 goto repeat; 610 } 611 } 612 } 613 614 void 615 avr32dci_vbus_interrupt(struct avr32dci_softc *sc, uint8_t is_on) 616 { 617 DPRINTFN(5, "vbus = %u\n", is_on); 618 619 if (is_on) { 620 if (!sc->sc_flags.status_vbus) { 621 sc->sc_flags.status_vbus = 1; 622 623 /* complete root HUB interrupt endpoint */ 624 625 avr32dci_root_intr(sc); 626 } 627 } else { 628 if (sc->sc_flags.status_vbus) { 629 sc->sc_flags.status_vbus = 0; 630 sc->sc_flags.status_bus_reset = 0; 631 sc->sc_flags.status_suspend = 0; 632 sc->sc_flags.change_suspend = 0; 633 sc->sc_flags.change_connect = 1; 634 635 /* complete root HUB interrupt endpoint */ 636 637 avr32dci_root_intr(sc); 638 } 639 } 640 } 641 642 void 643 avr32dci_interrupt(struct avr32dci_softc *sc) 644 { 645 uint32_t status; 646 647 USB_BUS_LOCK(&sc->sc_bus); 648 649 /* read interrupt status */ 650 status = AVR32_READ_4(sc, AVR32_INTSTA); 651 652 /* clear all set interrupts */ 653 AVR32_WRITE_4(sc, AVR32_CLRINT, status); 654 655 DPRINTFN(14, "INTSTA=0x%08x\n", status); 656 657 /* check for any bus state change interrupts */ 658 if (status & AVR32_INT_ENDRESET) { 659 660 DPRINTFN(5, "end of reset\n"); 661 662 /* set correct state */ 663 sc->sc_flags.status_bus_reset = 1; 664 sc->sc_flags.status_suspend = 0; 665 sc->sc_flags.change_suspend = 0; 666 sc->sc_flags.change_connect = 1; 667 668 /* disable resume interrupt */ 669 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD | 670 AVR32_INT_ENDRESET, AVR32_INT_WAKE_UP); 671 672 /* complete root HUB interrupt endpoint */ 673 avr32dci_root_intr(sc); 674 } 675 /* 676 * If resume and suspend is set at the same time we interpret 677 * that like RESUME. Resume is set when there is at least 3 678 * milliseconds of inactivity on the USB BUS. 679 */ 680 if (status & AVR32_INT_WAKE_UP) { 681 682 DPRINTFN(5, "resume interrupt\n"); 683 684 if (sc->sc_flags.status_suspend) { 685 /* update status bits */ 686 sc->sc_flags.status_suspend = 0; 687 sc->sc_flags.change_suspend = 1; 688 689 /* disable resume interrupt */ 690 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD | 691 AVR32_INT_ENDRESET, AVR32_INT_WAKE_UP); 692 693 /* complete root HUB interrupt endpoint */ 694 avr32dci_root_intr(sc); 695 } 696 } else if (status & AVR32_INT_DET_SUSPD) { 697 698 DPRINTFN(5, "suspend interrupt\n"); 699 700 if (!sc->sc_flags.status_suspend) { 701 /* update status bits */ 702 sc->sc_flags.status_suspend = 1; 703 sc->sc_flags.change_suspend = 1; 704 705 /* disable suspend interrupt */ 706 avr32dci_mod_ien(sc, AVR32_INT_WAKE_UP | 707 AVR32_INT_ENDRESET, AVR32_INT_DET_SUSPD); 708 709 /* complete root HUB interrupt endpoint */ 710 avr32dci_root_intr(sc); 711 } 712 } 713 /* check for any endpoint interrupts */ 714 if (status & -AVR32_INT_EPT_INT(0)) { 715 716 DPRINTFN(5, "real endpoint interrupt\n"); 717 718 avr32dci_interrupt_poll(sc); 719 } 720 USB_BUS_UNLOCK(&sc->sc_bus); 721 } 722 723 static void 724 avr32dci_setup_standard_chain_sub(struct avr32dci_std_temp *temp) 725 { 726 struct avr32dci_td *td; 727 728 /* get current Transfer Descriptor */ 729 td = temp->td_next; 730 temp->td = td; 731 732 /* prepare for next TD */ 733 temp->td_next = td->obj_next; 734 735 /* fill out the Transfer Descriptor */ 736 td->func = temp->func; 737 td->pc = temp->pc; 738 td->offset = temp->offset; 739 td->remainder = temp->len; 740 td->error = 0; 741 td->did_stall = temp->did_stall; 742 td->short_pkt = temp->short_pkt; 743 td->alt_next = temp->setup_alt_next; 744 } 745 746 static void 747 avr32dci_setup_standard_chain(struct usb_xfer *xfer) 748 { 749 struct avr32dci_std_temp temp; 750 struct avr32dci_softc *sc; 751 struct avr32dci_td *td; 752 uint32_t x; 753 uint8_t ep_no; 754 uint8_t need_sync; 755 756 DPRINTFN(9, "addr=%d endpt=%d sumlen=%d speed=%d\n", 757 xfer->address, UE_GET_ADDR(xfer->endpointno), 758 xfer->sumlen, usbd_get_speed(xfer->xroot->udev)); 759 760 temp.max_frame_size = xfer->max_frame_size; 761 762 td = xfer->td_start[0]; 763 xfer->td_transfer_first = td; 764 xfer->td_transfer_cache = td; 765 766 /* setup temp */ 767 768 temp.pc = NULL; 769 temp.td = NULL; 770 temp.td_next = xfer->td_start[0]; 771 temp.offset = 0; 772 temp.setup_alt_next = xfer->flags_int.short_frames_ok; 773 temp.did_stall = !xfer->flags_int.control_stall; 774 775 sc = AVR32_BUS2SC(xfer->xroot->bus); 776 ep_no = (xfer->endpointno & UE_ADDR); 777 778 /* check if we should prepend a setup message */ 779 780 if (xfer->flags_int.control_xfr) { 781 if (xfer->flags_int.control_hdr) { 782 783 temp.func = &avr32dci_setup_rx; 784 temp.len = xfer->frlengths[0]; 785 temp.pc = xfer->frbuffers + 0; 786 temp.short_pkt = temp.len ? 1 : 0; 787 /* check for last frame */ 788 if (xfer->nframes == 1) { 789 /* no STATUS stage yet, SETUP is last */ 790 if (xfer->flags_int.control_act) 791 temp.setup_alt_next = 0; 792 } 793 avr32dci_setup_standard_chain_sub(&temp); 794 } 795 x = 1; 796 } else { 797 x = 0; 798 } 799 800 if (x != xfer->nframes) { 801 if (xfer->endpointno & UE_DIR_IN) { 802 temp.func = &avr32dci_data_tx; 803 need_sync = 1; 804 } else { 805 temp.func = &avr32dci_data_rx; 806 need_sync = 0; 807 } 808 809 /* setup "pc" pointer */ 810 temp.pc = xfer->frbuffers + x; 811 } else { 812 need_sync = 0; 813 } 814 while (x != xfer->nframes) { 815 816 /* DATA0 / DATA1 message */ 817 818 temp.len = xfer->frlengths[x]; 819 820 x++; 821 822 if (x == xfer->nframes) { 823 if (xfer->flags_int.control_xfr) { 824 if (xfer->flags_int.control_act) { 825 temp.setup_alt_next = 0; 826 } 827 } else { 828 temp.setup_alt_next = 0; 829 } 830 } 831 if (temp.len == 0) { 832 833 /* make sure that we send an USB packet */ 834 835 temp.short_pkt = 0; 836 837 } else { 838 839 /* regular data transfer */ 840 841 temp.short_pkt = (xfer->flags.force_short_xfer) ? 0 : 1; 842 } 843 844 avr32dci_setup_standard_chain_sub(&temp); 845 846 if (xfer->flags_int.isochronous_xfr) { 847 temp.offset += temp.len; 848 } else { 849 /* get next Page Cache pointer */ 850 temp.pc = xfer->frbuffers + x; 851 } 852 } 853 854 if (xfer->flags_int.control_xfr) { 855 856 /* always setup a valid "pc" pointer for status and sync */ 857 temp.pc = xfer->frbuffers + 0; 858 temp.len = 0; 859 temp.short_pkt = 0; 860 temp.setup_alt_next = 0; 861 862 /* check if we need to sync */ 863 if (need_sync) { 864 /* we need a SYNC point after TX */ 865 temp.func = &avr32dci_data_tx_sync; 866 avr32dci_setup_standard_chain_sub(&temp); 867 } 868 /* check if we should append a status stage */ 869 if (!xfer->flags_int.control_act) { 870 871 /* 872 * Send a DATA1 message and invert the current 873 * endpoint direction. 874 */ 875 if (xfer->endpointno & UE_DIR_IN) { 876 temp.func = &avr32dci_data_rx; 877 need_sync = 0; 878 } else { 879 temp.func = &avr32dci_data_tx; 880 need_sync = 1; 881 } 882 883 avr32dci_setup_standard_chain_sub(&temp); 884 if (need_sync) { 885 /* we need a SYNC point after TX */ 886 temp.func = &avr32dci_data_tx_sync; 887 avr32dci_setup_standard_chain_sub(&temp); 888 } 889 } 890 } 891 /* must have at least one frame! */ 892 td = temp.td; 893 xfer->td_transfer_last = td; 894 } 895 896 static void 897 avr32dci_timeout(void *arg) 898 { 899 struct usb_xfer *xfer = arg; 900 901 DPRINTF("xfer=%p\n", xfer); 902 903 USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED); 904 905 /* transfer is transferred */ 906 avr32dci_device_done(xfer, USB_ERR_TIMEOUT); 907 } 908 909 static void 910 avr32dci_start_standard_chain(struct usb_xfer *xfer) 911 { 912 DPRINTFN(9, "\n"); 913 914 /* poll one time - will turn on interrupts */ 915 if (avr32dci_xfer_do_fifo(xfer)) { 916 uint8_t ep_no = xfer->endpointno & UE_ADDR; 917 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus); 918 919 avr32dci_mod_ien(sc, AVR32_INT_EPT_INT(ep_no), 0); 920 921 /* put transfer on interrupt queue */ 922 usbd_transfer_enqueue(&xfer->xroot->bus->intr_q, xfer); 923 924 /* start timeout, if any */ 925 if (xfer->timeout != 0) { 926 usbd_transfer_timeout_ms(xfer, 927 &avr32dci_timeout, xfer->timeout); 928 } 929 } 930 } 931 932 static void 933 avr32dci_root_intr(struct avr32dci_softc *sc) 934 { 935 DPRINTFN(9, "\n"); 936 937 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 938 939 /* set port bit */ 940 sc->sc_hub_idata[0] = 0x02; /* we only have one port */ 941 942 uhub_root_intr(&sc->sc_bus, sc->sc_hub_idata, 943 sizeof(sc->sc_hub_idata)); 944 } 945 946 static usb_error_t 947 avr32dci_standard_done_sub(struct usb_xfer *xfer) 948 { 949 struct avr32dci_td *td; 950 uint32_t len; 951 uint8_t error; 952 953 DPRINTFN(9, "\n"); 954 955 td = xfer->td_transfer_cache; 956 957 do { 958 len = td->remainder; 959 960 if (xfer->aframes != xfer->nframes) { 961 /* 962 * Verify the length and subtract 963 * the remainder from "frlengths[]": 964 */ 965 if (len > xfer->frlengths[xfer->aframes]) { 966 td->error = 1; 967 } else { 968 xfer->frlengths[xfer->aframes] -= len; 969 } 970 } 971 /* Check for transfer error */ 972 if (td->error) { 973 /* the transfer is finished */ 974 error = 1; 975 td = NULL; 976 break; 977 } 978 /* Check for short transfer */ 979 if (len > 0) { 980 if (xfer->flags_int.short_frames_ok) { 981 /* follow alt next */ 982 if (td->alt_next) { 983 td = td->obj_next; 984 } else { 985 td = NULL; 986 } 987 } else { 988 /* the transfer is finished */ 989 td = NULL; 990 } 991 error = 0; 992 break; 993 } 994 td = td->obj_next; 995 996 /* this USB frame is complete */ 997 error = 0; 998 break; 999 1000 } while (0); 1001 1002 /* update transfer cache */ 1003 1004 xfer->td_transfer_cache = td; 1005 1006 return (error ? 1007 USB_ERR_STALLED : USB_ERR_NORMAL_COMPLETION); 1008 } 1009 1010 static void 1011 avr32dci_standard_done(struct usb_xfer *xfer) 1012 { 1013 usb_error_t err = 0; 1014 1015 DPRINTFN(13, "xfer=%p pipe=%p transfer done\n", 1016 xfer, xfer->endpoint); 1017 1018 /* reset scanner */ 1019 1020 xfer->td_transfer_cache = xfer->td_transfer_first; 1021 1022 if (xfer->flags_int.control_xfr) { 1023 1024 if (xfer->flags_int.control_hdr) { 1025 1026 err = avr32dci_standard_done_sub(xfer); 1027 } 1028 xfer->aframes = 1; 1029 1030 if (xfer->td_transfer_cache == NULL) { 1031 goto done; 1032 } 1033 } 1034 while (xfer->aframes != xfer->nframes) { 1035 1036 err = avr32dci_standard_done_sub(xfer); 1037 xfer->aframes++; 1038 1039 if (xfer->td_transfer_cache == NULL) { 1040 goto done; 1041 } 1042 } 1043 1044 if (xfer->flags_int.control_xfr && 1045 !xfer->flags_int.control_act) { 1046 1047 err = avr32dci_standard_done_sub(xfer); 1048 } 1049 done: 1050 avr32dci_device_done(xfer, err); 1051 } 1052 1053 /*------------------------------------------------------------------------* 1054 * avr32dci_device_done 1055 * 1056 * NOTE: this function can be called more than one time on the 1057 * same USB transfer! 1058 *------------------------------------------------------------------------*/ 1059 static void 1060 avr32dci_device_done(struct usb_xfer *xfer, usb_error_t error) 1061 { 1062 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus); 1063 uint8_t ep_no; 1064 1065 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1066 1067 DPRINTFN(9, "xfer=%p, pipe=%p, error=%d\n", 1068 xfer, xfer->endpoint, error); 1069 1070 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) { 1071 ep_no = (xfer->endpointno & UE_ADDR); 1072 1073 /* disable endpoint interrupt */ 1074 avr32dci_mod_ien(sc, 0, AVR32_INT_EPT_INT(ep_no)); 1075 1076 DPRINTFN(15, "disabled interrupts!\n"); 1077 } 1078 /* dequeue transfer and start next transfer */ 1079 usbd_transfer_done(xfer, error); 1080 } 1081 1082 static void 1083 avr32dci_set_stall(struct usb_device *udev, struct usb_xfer *xfer, 1084 struct usb_endpoint *pipe, uint8_t *did_stall) 1085 { 1086 struct avr32dci_softc *sc; 1087 uint8_t ep_no; 1088 1089 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); 1090 1091 DPRINTFN(5, "pipe=%p\n", pipe); 1092 1093 if (xfer) { 1094 /* cancel any ongoing transfers */ 1095 avr32dci_device_done(xfer, USB_ERR_STALLED); 1096 } 1097 sc = AVR32_BUS2SC(udev->bus); 1098 /* get endpoint number */ 1099 ep_no = (pipe->edesc->bEndpointAddress & UE_ADDR); 1100 /* set stall */ 1101 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(ep_no), AVR32_EPTSTA_FRCESTALL); 1102 } 1103 1104 static void 1105 avr32dci_clear_stall_sub(struct avr32dci_softc *sc, uint8_t ep_no, 1106 uint8_t ep_type, uint8_t ep_dir) 1107 { 1108 const struct usb_hw_ep_profile *pf; 1109 uint32_t temp; 1110 uint32_t epsize; 1111 uint8_t n; 1112 1113 if (ep_type == UE_CONTROL) { 1114 /* clearing stall is not needed */ 1115 return; 1116 } 1117 /* set endpoint reset */ 1118 AVR32_WRITE_4(sc, AVR32_EPTRST, AVR32_EPTRST_MASK(ep_no)); 1119 1120 /* set stall */ 1121 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(ep_no), AVR32_EPTSTA_FRCESTALL); 1122 1123 /* reset data toggle */ 1124 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(ep_no), AVR32_EPTSTA_TOGGLESQ); 1125 1126 /* clear stall */ 1127 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(ep_no), AVR32_EPTSTA_FRCESTALL); 1128 1129 if (ep_type == UE_BULK) { 1130 temp = AVR32_EPTCFG_TYPE_BULK; 1131 } else if (ep_type == UE_INTERRUPT) { 1132 temp = AVR32_EPTCFG_TYPE_INTR; 1133 } else { 1134 temp = AVR32_EPTCFG_TYPE_ISOC | 1135 AVR32_EPTCFG_NB_TRANS(1); 1136 } 1137 if (ep_dir & UE_DIR_IN) { 1138 temp |= AVR32_EPTCFG_EPDIR_IN; 1139 } 1140 avr32dci_get_hw_ep_profile(NULL, &pf, ep_no); 1141 1142 /* compute endpoint size (use maximum) */ 1143 epsize = pf->max_in_frame_size | pf->max_out_frame_size; 1144 n = 0; 1145 while ((epsize /= 2)) 1146 n++; 1147 temp |= AVR32_EPTCFG_EPSIZE(n); 1148 1149 /* use the maximum number of banks supported */ 1150 if (ep_no < 1) 1151 temp |= AVR32_EPTCFG_NBANK(1); 1152 else if (ep_no < 3) 1153 temp |= AVR32_EPTCFG_NBANK(2); 1154 else 1155 temp |= AVR32_EPTCFG_NBANK(3); 1156 1157 AVR32_WRITE_4(sc, AVR32_EPTCFG(ep_no), temp); 1158 1159 temp = AVR32_READ_4(sc, AVR32_EPTCFG(ep_no)); 1160 1161 if (!(temp & AVR32_EPTCFG_EPT_MAPD)) { 1162 device_printf(sc->sc_bus.bdev, "Chip rejected configuration\n"); 1163 } else { 1164 AVR32_WRITE_4(sc, AVR32_EPTCTLENB(ep_no), 1165 AVR32_EPTCTL_EPT_ENABL); 1166 } 1167 } 1168 1169 static void 1170 avr32dci_clear_stall(struct usb_device *udev, struct usb_endpoint *pipe) 1171 { 1172 struct avr32dci_softc *sc; 1173 struct usb_endpoint_descriptor *ed; 1174 1175 DPRINTFN(5, "pipe=%p\n", pipe); 1176 1177 USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED); 1178 1179 /* check mode */ 1180 if (udev->flags.usb_mode != USB_MODE_DEVICE) { 1181 /* not supported */ 1182 return; 1183 } 1184 /* get softc */ 1185 sc = AVR32_BUS2SC(udev->bus); 1186 1187 /* get endpoint descriptor */ 1188 ed = pipe->edesc; 1189 1190 /* reset endpoint */ 1191 avr32dci_clear_stall_sub(sc, 1192 (ed->bEndpointAddress & UE_ADDR), 1193 (ed->bmAttributes & UE_XFERTYPE), 1194 (ed->bEndpointAddress & (UE_DIR_IN | UE_DIR_OUT))); 1195 } 1196 1197 usb_error_t 1198 avr32dci_init(struct avr32dci_softc *sc) 1199 { 1200 uint8_t n; 1201 1202 DPRINTF("start\n"); 1203 1204 /* set up the bus structure */ 1205 sc->sc_bus.usbrev = USB_REV_1_1; 1206 sc->sc_bus.methods = &avr32dci_bus_methods; 1207 1208 USB_BUS_LOCK(&sc->sc_bus); 1209 1210 /* make sure USB is enabled */ 1211 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_EN_USBA, 0); 1212 1213 /* turn on clocks */ 1214 (sc->sc_clocks_on) (&sc->sc_bus); 1215 1216 /* make sure device is re-enumerated */ 1217 avr32dci_mod_ctrl(sc, AVR32_CTRL_DEV_DETACH, 0); 1218 1219 /* wait a little for things to stabilise */ 1220 usb_pause_mtx(&sc->sc_bus.bus_mtx, hz / 20); 1221 1222 /* disable interrupts */ 1223 avr32dci_mod_ien(sc, 0, 0xFFFFFFFF); 1224 1225 /* enable interrupts */ 1226 avr32dci_mod_ien(sc, AVR32_INT_DET_SUSPD | 1227 AVR32_INT_ENDRESET, 0); 1228 1229 /* reset all endpoints */ 1230 AVR32_WRITE_4(sc, AVR32_EPTRST, (1 << AVR32_EP_MAX) - 1); 1231 1232 /* disable all endpoints */ 1233 for (n = 0; n != AVR32_EP_MAX; n++) { 1234 /* disable endpoint */ 1235 AVR32_WRITE_4(sc, AVR32_EPTCTLDIS(n), AVR32_EPTCTL_EPT_ENABL); 1236 } 1237 1238 /* turn off clocks */ 1239 1240 avr32dci_clocks_off(sc); 1241 1242 USB_BUS_UNLOCK(&sc->sc_bus); 1243 1244 /* catch any lost interrupts */ 1245 1246 avr32dci_do_poll(&sc->sc_bus); 1247 1248 return (0); /* success */ 1249 } 1250 1251 void 1252 avr32dci_uninit(struct avr32dci_softc *sc) 1253 { 1254 uint8_t n; 1255 1256 USB_BUS_LOCK(&sc->sc_bus); 1257 1258 /* turn on clocks */ 1259 (sc->sc_clocks_on) (&sc->sc_bus); 1260 1261 /* disable interrupts */ 1262 avr32dci_mod_ien(sc, 0, 0xFFFFFFFF); 1263 1264 /* reset all endpoints */ 1265 AVR32_WRITE_4(sc, AVR32_EPTRST, (1 << AVR32_EP_MAX) - 1); 1266 1267 /* disable all endpoints */ 1268 for (n = 0; n != AVR32_EP_MAX; n++) { 1269 /* disable endpoint */ 1270 AVR32_WRITE_4(sc, AVR32_EPTCTLDIS(n), AVR32_EPTCTL_EPT_ENABL); 1271 } 1272 1273 sc->sc_flags.port_powered = 0; 1274 sc->sc_flags.status_vbus = 0; 1275 sc->sc_flags.status_bus_reset = 0; 1276 sc->sc_flags.status_suspend = 0; 1277 sc->sc_flags.change_suspend = 0; 1278 sc->sc_flags.change_connect = 1; 1279 1280 avr32dci_pull_down(sc); 1281 avr32dci_clocks_off(sc); 1282 1283 USB_BUS_UNLOCK(&sc->sc_bus); 1284 } 1285 1286 static void 1287 avr32dci_suspend(struct avr32dci_softc *sc) 1288 { 1289 /* TODO */ 1290 } 1291 1292 static void 1293 avr32dci_resume(struct avr32dci_softc *sc) 1294 { 1295 /* TODO */ 1296 } 1297 1298 static void 1299 avr32dci_do_poll(struct usb_bus *bus) 1300 { 1301 struct avr32dci_softc *sc = AVR32_BUS2SC(bus); 1302 1303 USB_BUS_LOCK(&sc->sc_bus); 1304 avr32dci_interrupt_poll(sc); 1305 USB_BUS_UNLOCK(&sc->sc_bus); 1306 } 1307 1308 /*------------------------------------------------------------------------* 1309 * at91dci bulk support 1310 * at91dci control support 1311 * at91dci interrupt support 1312 *------------------------------------------------------------------------*/ 1313 static void 1314 avr32dci_device_non_isoc_open(struct usb_xfer *xfer) 1315 { 1316 return; 1317 } 1318 1319 static void 1320 avr32dci_device_non_isoc_close(struct usb_xfer *xfer) 1321 { 1322 avr32dci_device_done(xfer, USB_ERR_CANCELLED); 1323 } 1324 1325 static void 1326 avr32dci_device_non_isoc_enter(struct usb_xfer *xfer) 1327 { 1328 return; 1329 } 1330 1331 static void 1332 avr32dci_device_non_isoc_start(struct usb_xfer *xfer) 1333 { 1334 /* setup TDs */ 1335 avr32dci_setup_standard_chain(xfer); 1336 avr32dci_start_standard_chain(xfer); 1337 } 1338 1339 struct usb_pipe_methods avr32dci_device_non_isoc_methods = 1340 { 1341 .open = avr32dci_device_non_isoc_open, 1342 .close = avr32dci_device_non_isoc_close, 1343 .enter = avr32dci_device_non_isoc_enter, 1344 .start = avr32dci_device_non_isoc_start, 1345 }; 1346 1347 /*------------------------------------------------------------------------* 1348 * at91dci full speed isochronous support 1349 *------------------------------------------------------------------------*/ 1350 static void 1351 avr32dci_device_isoc_fs_open(struct usb_xfer *xfer) 1352 { 1353 return; 1354 } 1355 1356 static void 1357 avr32dci_device_isoc_fs_close(struct usb_xfer *xfer) 1358 { 1359 avr32dci_device_done(xfer, USB_ERR_CANCELLED); 1360 } 1361 1362 static void 1363 avr32dci_device_isoc_fs_enter(struct usb_xfer *xfer) 1364 { 1365 struct avr32dci_softc *sc = AVR32_BUS2SC(xfer->xroot->bus); 1366 uint32_t temp; 1367 uint32_t nframes; 1368 uint8_t ep_no; 1369 1370 DPRINTFN(6, "xfer=%p next=%d nframes=%d\n", 1371 xfer, xfer->endpoint->isoc_next, xfer->nframes); 1372 1373 /* get the current frame index */ 1374 ep_no = xfer->endpointno & UE_ADDR; 1375 nframes = (AVR32_READ_4(sc, AVR32_FNUM) / 8); 1376 1377 nframes &= AVR32_FRAME_MASK; 1378 1379 /* 1380 * check if the frame index is within the window where the frames 1381 * will be inserted 1382 */ 1383 temp = (nframes - xfer->endpoint->isoc_next) & AVR32_FRAME_MASK; 1384 1385 if ((xfer->endpoint->is_synced == 0) || 1386 (temp < xfer->nframes)) { 1387 /* 1388 * If there is data underflow or the pipe queue is 1389 * empty we schedule the transfer a few frames ahead 1390 * of the current frame position. Else two isochronous 1391 * transfers might overlap. 1392 */ 1393 xfer->endpoint->isoc_next = (nframes + 3) & AVR32_FRAME_MASK; 1394 xfer->endpoint->is_synced = 1; 1395 DPRINTFN(3, "start next=%d\n", xfer->endpoint->isoc_next); 1396 } 1397 /* 1398 * compute how many milliseconds the insertion is ahead of the 1399 * current frame position: 1400 */ 1401 temp = (xfer->endpoint->isoc_next - nframes) & AVR32_FRAME_MASK; 1402 1403 /* 1404 * pre-compute when the isochronous transfer will be finished: 1405 */ 1406 xfer->isoc_time_complete = 1407 usb_isoc_time_expand(&sc->sc_bus, nframes) + temp + 1408 xfer->nframes; 1409 1410 /* compute frame number for next insertion */ 1411 xfer->endpoint->isoc_next += xfer->nframes; 1412 1413 /* setup TDs */ 1414 avr32dci_setup_standard_chain(xfer); 1415 } 1416 1417 static void 1418 avr32dci_device_isoc_fs_start(struct usb_xfer *xfer) 1419 { 1420 /* start TD chain */ 1421 avr32dci_start_standard_chain(xfer); 1422 } 1423 1424 struct usb_pipe_methods avr32dci_device_isoc_fs_methods = 1425 { 1426 .open = avr32dci_device_isoc_fs_open, 1427 .close = avr32dci_device_isoc_fs_close, 1428 .enter = avr32dci_device_isoc_fs_enter, 1429 .start = avr32dci_device_isoc_fs_start, 1430 }; 1431 1432 /*------------------------------------------------------------------------* 1433 * at91dci root control support 1434 *------------------------------------------------------------------------* 1435 * Simulate a hardware HUB by handling all the necessary requests. 1436 *------------------------------------------------------------------------*/ 1437 1438 static const struct usb_device_descriptor avr32dci_devd = { 1439 .bLength = sizeof(struct usb_device_descriptor), 1440 .bDescriptorType = UDESC_DEVICE, 1441 .bcdUSB = {0x00, 0x02}, 1442 .bDeviceClass = UDCLASS_HUB, 1443 .bDeviceSubClass = UDSUBCLASS_HUB, 1444 .bDeviceProtocol = UDPROTO_HSHUBSTT, 1445 .bMaxPacketSize = 64, 1446 .bcdDevice = {0x00, 0x01}, 1447 .iManufacturer = 1, 1448 .iProduct = 2, 1449 .bNumConfigurations = 1, 1450 }; 1451 1452 static const struct usb_device_qualifier avr32dci_odevd = { 1453 .bLength = sizeof(struct usb_device_qualifier), 1454 .bDescriptorType = UDESC_DEVICE_QUALIFIER, 1455 .bcdUSB = {0x00, 0x02}, 1456 .bDeviceClass = UDCLASS_HUB, 1457 .bDeviceSubClass = UDSUBCLASS_HUB, 1458 .bDeviceProtocol = UDPROTO_FSHUB, 1459 .bMaxPacketSize0 = 0, 1460 .bNumConfigurations = 0, 1461 }; 1462 1463 static const struct avr32dci_config_desc avr32dci_confd = { 1464 .confd = { 1465 .bLength = sizeof(struct usb_config_descriptor), 1466 .bDescriptorType = UDESC_CONFIG, 1467 .wTotalLength[0] = sizeof(avr32dci_confd), 1468 .bNumInterface = 1, 1469 .bConfigurationValue = 1, 1470 .iConfiguration = 0, 1471 .bmAttributes = UC_SELF_POWERED, 1472 .bMaxPower = 0, 1473 }, 1474 .ifcd = { 1475 .bLength = sizeof(struct usb_interface_descriptor), 1476 .bDescriptorType = UDESC_INTERFACE, 1477 .bNumEndpoints = 1, 1478 .bInterfaceClass = UICLASS_HUB, 1479 .bInterfaceSubClass = UISUBCLASS_HUB, 1480 .bInterfaceProtocol = 0, 1481 }, 1482 .endpd = { 1483 .bLength = sizeof(struct usb_endpoint_descriptor), 1484 .bDescriptorType = UDESC_ENDPOINT, 1485 .bEndpointAddress = (UE_DIR_IN | AVR32_INTR_ENDPT), 1486 .bmAttributes = UE_INTERRUPT, 1487 .wMaxPacketSize[0] = 8, 1488 .bInterval = 255, 1489 }, 1490 }; 1491 1492 #define HSETW(ptr, val) ptr = { (uint8_t)(val), (uint8_t)((val) >> 8) } 1493 1494 static const struct usb_hub_descriptor_min avr32dci_hubd = { 1495 .bDescLength = sizeof(avr32dci_hubd), 1496 .bDescriptorType = UDESC_HUB, 1497 .bNbrPorts = 1, 1498 HSETW(.wHubCharacteristics, (UHD_PWR_NO_SWITCH | UHD_OC_INDIVIDUAL)), 1499 .bPwrOn2PwrGood = 50, 1500 .bHubContrCurrent = 0, 1501 .DeviceRemovable = {0}, /* port is removable */ 1502 }; 1503 1504 #define STRING_LANG \ 1505 0x09, 0x04, /* American English */ 1506 1507 #define STRING_VENDOR \ 1508 'A', 0, 'V', 0, 'R', 0, '3', 0, '2', 0 1509 1510 #define STRING_PRODUCT \ 1511 'D', 0, 'C', 0, 'I', 0, ' ', 0, 'R', 0, \ 1512 'o', 0, 'o', 0, 't', 0, ' ', 0, 'H', 0, \ 1513 'U', 0, 'B', 0, 1514 1515 USB_MAKE_STRING_DESC(STRING_LANG, avr32dci_langtab); 1516 USB_MAKE_STRING_DESC(STRING_VENDOR, avr32dci_vendor); 1517 USB_MAKE_STRING_DESC(STRING_PRODUCT, avr32dci_product); 1518 1519 static usb_error_t 1520 avr32dci_roothub_exec(struct usb_device *udev, 1521 struct usb_device_request *req, const void **pptr, uint16_t *plength) 1522 { 1523 struct avr32dci_softc *sc = AVR32_BUS2SC(udev->bus); 1524 const void *ptr; 1525 uint16_t len; 1526 uint16_t value; 1527 uint16_t index; 1528 uint32_t temp; 1529 usb_error_t err; 1530 1531 USB_BUS_LOCK_ASSERT(&sc->sc_bus, MA_OWNED); 1532 1533 /* buffer reset */ 1534 ptr = (const void *)&sc->sc_hub_temp; 1535 len = 0; 1536 err = 0; 1537 1538 value = UGETW(req->wValue); 1539 index = UGETW(req->wIndex); 1540 1541 /* demultiplex the control request */ 1542 1543 switch (req->bmRequestType) { 1544 case UT_READ_DEVICE: 1545 switch (req->bRequest) { 1546 case UR_GET_DESCRIPTOR: 1547 goto tr_handle_get_descriptor; 1548 case UR_GET_CONFIG: 1549 goto tr_handle_get_config; 1550 case UR_GET_STATUS: 1551 goto tr_handle_get_status; 1552 default: 1553 goto tr_stalled; 1554 } 1555 break; 1556 1557 case UT_WRITE_DEVICE: 1558 switch (req->bRequest) { 1559 case UR_SET_ADDRESS: 1560 goto tr_handle_set_address; 1561 case UR_SET_CONFIG: 1562 goto tr_handle_set_config; 1563 case UR_CLEAR_FEATURE: 1564 goto tr_valid; /* nop */ 1565 case UR_SET_DESCRIPTOR: 1566 goto tr_valid; /* nop */ 1567 case UR_SET_FEATURE: 1568 default: 1569 goto tr_stalled; 1570 } 1571 break; 1572 1573 case UT_WRITE_ENDPOINT: 1574 switch (req->bRequest) { 1575 case UR_CLEAR_FEATURE: 1576 switch (UGETW(req->wValue)) { 1577 case UF_ENDPOINT_HALT: 1578 goto tr_handle_clear_halt; 1579 case UF_DEVICE_REMOTE_WAKEUP: 1580 goto tr_handle_clear_wakeup; 1581 default: 1582 goto tr_stalled; 1583 } 1584 break; 1585 case UR_SET_FEATURE: 1586 switch (UGETW(req->wValue)) { 1587 case UF_ENDPOINT_HALT: 1588 goto tr_handle_set_halt; 1589 case UF_DEVICE_REMOTE_WAKEUP: 1590 goto tr_handle_set_wakeup; 1591 default: 1592 goto tr_stalled; 1593 } 1594 break; 1595 case UR_SYNCH_FRAME: 1596 goto tr_valid; /* nop */ 1597 default: 1598 goto tr_stalled; 1599 } 1600 break; 1601 1602 case UT_READ_ENDPOINT: 1603 switch (req->bRequest) { 1604 case UR_GET_STATUS: 1605 goto tr_handle_get_ep_status; 1606 default: 1607 goto tr_stalled; 1608 } 1609 break; 1610 1611 case UT_WRITE_INTERFACE: 1612 switch (req->bRequest) { 1613 case UR_SET_INTERFACE: 1614 goto tr_handle_set_interface; 1615 case UR_CLEAR_FEATURE: 1616 goto tr_valid; /* nop */ 1617 case UR_SET_FEATURE: 1618 default: 1619 goto tr_stalled; 1620 } 1621 break; 1622 1623 case UT_READ_INTERFACE: 1624 switch (req->bRequest) { 1625 case UR_GET_INTERFACE: 1626 goto tr_handle_get_interface; 1627 case UR_GET_STATUS: 1628 goto tr_handle_get_iface_status; 1629 default: 1630 goto tr_stalled; 1631 } 1632 break; 1633 1634 case UT_WRITE_CLASS_INTERFACE: 1635 case UT_WRITE_VENDOR_INTERFACE: 1636 /* XXX forward */ 1637 break; 1638 1639 case UT_READ_CLASS_INTERFACE: 1640 case UT_READ_VENDOR_INTERFACE: 1641 /* XXX forward */ 1642 break; 1643 1644 case UT_WRITE_CLASS_DEVICE: 1645 switch (req->bRequest) { 1646 case UR_CLEAR_FEATURE: 1647 goto tr_valid; 1648 case UR_SET_DESCRIPTOR: 1649 case UR_SET_FEATURE: 1650 break; 1651 default: 1652 goto tr_stalled; 1653 } 1654 break; 1655 1656 case UT_WRITE_CLASS_OTHER: 1657 switch (req->bRequest) { 1658 case UR_CLEAR_FEATURE: 1659 goto tr_handle_clear_port_feature; 1660 case UR_SET_FEATURE: 1661 goto tr_handle_set_port_feature; 1662 case UR_CLEAR_TT_BUFFER: 1663 case UR_RESET_TT: 1664 case UR_STOP_TT: 1665 goto tr_valid; 1666 1667 default: 1668 goto tr_stalled; 1669 } 1670 break; 1671 1672 case UT_READ_CLASS_OTHER: 1673 switch (req->bRequest) { 1674 case UR_GET_TT_STATE: 1675 goto tr_handle_get_tt_state; 1676 case UR_GET_STATUS: 1677 goto tr_handle_get_port_status; 1678 default: 1679 goto tr_stalled; 1680 } 1681 break; 1682 1683 case UT_READ_CLASS_DEVICE: 1684 switch (req->bRequest) { 1685 case UR_GET_DESCRIPTOR: 1686 goto tr_handle_get_class_descriptor; 1687 case UR_GET_STATUS: 1688 goto tr_handle_get_class_status; 1689 1690 default: 1691 goto tr_stalled; 1692 } 1693 break; 1694 default: 1695 goto tr_stalled; 1696 } 1697 goto tr_valid; 1698 1699 tr_handle_get_descriptor: 1700 switch (value >> 8) { 1701 case UDESC_DEVICE: 1702 if (value & 0xff) { 1703 goto tr_stalled; 1704 } 1705 len = sizeof(avr32dci_devd); 1706 ptr = (const void *)&avr32dci_devd; 1707 goto tr_valid; 1708 case UDESC_CONFIG: 1709 if (value & 0xff) { 1710 goto tr_stalled; 1711 } 1712 len = sizeof(avr32dci_confd); 1713 ptr = (const void *)&avr32dci_confd; 1714 goto tr_valid; 1715 case UDESC_STRING: 1716 switch (value & 0xff) { 1717 case 0: /* Language table */ 1718 len = sizeof(avr32dci_langtab); 1719 ptr = (const void *)&avr32dci_langtab; 1720 goto tr_valid; 1721 1722 case 1: /* Vendor */ 1723 len = sizeof(avr32dci_vendor); 1724 ptr = (const void *)&avr32dci_vendor; 1725 goto tr_valid; 1726 1727 case 2: /* Product */ 1728 len = sizeof(avr32dci_product); 1729 ptr = (const void *)&avr32dci_product; 1730 goto tr_valid; 1731 default: 1732 break; 1733 } 1734 break; 1735 default: 1736 goto tr_stalled; 1737 } 1738 goto tr_stalled; 1739 1740 tr_handle_get_config: 1741 len = 1; 1742 sc->sc_hub_temp.wValue[0] = sc->sc_conf; 1743 goto tr_valid; 1744 1745 tr_handle_get_status: 1746 len = 2; 1747 USETW(sc->sc_hub_temp.wValue, UDS_SELF_POWERED); 1748 goto tr_valid; 1749 1750 tr_handle_set_address: 1751 if (value & 0xFF00) { 1752 goto tr_stalled; 1753 } 1754 sc->sc_rt_addr = value; 1755 goto tr_valid; 1756 1757 tr_handle_set_config: 1758 if (value >= 2) { 1759 goto tr_stalled; 1760 } 1761 sc->sc_conf = value; 1762 goto tr_valid; 1763 1764 tr_handle_get_interface: 1765 len = 1; 1766 sc->sc_hub_temp.wValue[0] = 0; 1767 goto tr_valid; 1768 1769 tr_handle_get_tt_state: 1770 tr_handle_get_class_status: 1771 tr_handle_get_iface_status: 1772 tr_handle_get_ep_status: 1773 len = 2; 1774 USETW(sc->sc_hub_temp.wValue, 0); 1775 goto tr_valid; 1776 1777 tr_handle_set_halt: 1778 tr_handle_set_interface: 1779 tr_handle_set_wakeup: 1780 tr_handle_clear_wakeup: 1781 tr_handle_clear_halt: 1782 goto tr_valid; 1783 1784 tr_handle_clear_port_feature: 1785 if (index != 1) { 1786 goto tr_stalled; 1787 } 1788 DPRINTFN(9, "UR_CLEAR_PORT_FEATURE on port %d\n", index); 1789 1790 switch (value) { 1791 case UHF_PORT_SUSPEND: 1792 avr32dci_wakeup_peer(sc); 1793 break; 1794 1795 case UHF_PORT_ENABLE: 1796 sc->sc_flags.port_enabled = 0; 1797 break; 1798 1799 case UHF_PORT_TEST: 1800 case UHF_PORT_INDICATOR: 1801 case UHF_C_PORT_ENABLE: 1802 case UHF_C_PORT_OVER_CURRENT: 1803 case UHF_C_PORT_RESET: 1804 /* nops */ 1805 break; 1806 case UHF_PORT_POWER: 1807 sc->sc_flags.port_powered = 0; 1808 avr32dci_pull_down(sc); 1809 avr32dci_clocks_off(sc); 1810 break; 1811 case UHF_C_PORT_CONNECTION: 1812 /* clear connect change flag */ 1813 sc->sc_flags.change_connect = 0; 1814 1815 if (!sc->sc_flags.status_bus_reset) { 1816 /* we are not connected */ 1817 break; 1818 } 1819 /* configure the control endpoint */ 1820 /* set endpoint reset */ 1821 AVR32_WRITE_4(sc, AVR32_EPTRST, AVR32_EPTRST_MASK(0)); 1822 1823 /* set stall */ 1824 AVR32_WRITE_4(sc, AVR32_EPTSETSTA(0), AVR32_EPTSTA_FRCESTALL); 1825 1826 /* reset data toggle */ 1827 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(0), AVR32_EPTSTA_TOGGLESQ); 1828 1829 /* clear stall */ 1830 AVR32_WRITE_4(sc, AVR32_EPTCLRSTA(0), AVR32_EPTSTA_FRCESTALL); 1831 1832 /* configure */ 1833 AVR32_WRITE_4(sc, AVR32_EPTCFG(0), AVR32_EPTCFG_TYPE_CTRL | 1834 AVR32_EPTCFG_NBANK(1) | AVR32_EPTCFG_EPSIZE(6)); 1835 1836 temp = AVR32_READ_4(sc, AVR32_EPTCFG(0)); 1837 1838 if (!(temp & AVR32_EPTCFG_EPT_MAPD)) { 1839 device_printf(sc->sc_bus.bdev, 1840 "Chip rejected configuration\n"); 1841 } else { 1842 AVR32_WRITE_4(sc, AVR32_EPTCTLENB(0), 1843 AVR32_EPTCTL_EPT_ENABL); 1844 } 1845 break; 1846 case UHF_C_PORT_SUSPEND: 1847 sc->sc_flags.change_suspend = 0; 1848 break; 1849 default: 1850 err = USB_ERR_IOERROR; 1851 goto done; 1852 } 1853 goto tr_valid; 1854 1855 tr_handle_set_port_feature: 1856 if (index != 1) { 1857 goto tr_stalled; 1858 } 1859 DPRINTFN(9, "UR_SET_PORT_FEATURE\n"); 1860 1861 switch (value) { 1862 case UHF_PORT_ENABLE: 1863 sc->sc_flags.port_enabled = 1; 1864 break; 1865 case UHF_PORT_SUSPEND: 1866 case UHF_PORT_RESET: 1867 case UHF_PORT_TEST: 1868 case UHF_PORT_INDICATOR: 1869 /* nops */ 1870 break; 1871 case UHF_PORT_POWER: 1872 sc->sc_flags.port_powered = 1; 1873 break; 1874 default: 1875 err = USB_ERR_IOERROR; 1876 goto done; 1877 } 1878 goto tr_valid; 1879 1880 tr_handle_get_port_status: 1881 1882 DPRINTFN(9, "UR_GET_PORT_STATUS\n"); 1883 1884 if (index != 1) { 1885 goto tr_stalled; 1886 } 1887 if (sc->sc_flags.status_vbus) { 1888 avr32dci_clocks_on(sc); 1889 avr32dci_pull_up(sc); 1890 } else { 1891 avr32dci_pull_down(sc); 1892 avr32dci_clocks_off(sc); 1893 } 1894 1895 /* Select Device Side Mode */ 1896 1897 value = UPS_PORT_MODE_DEVICE; 1898 1899 /* Check for High Speed */ 1900 if (AVR32_READ_4(sc, AVR32_INTSTA) & AVR32_INT_SPEED) 1901 value |= UPS_HIGH_SPEED; 1902 1903 if (sc->sc_flags.port_powered) { 1904 value |= UPS_PORT_POWER; 1905 } 1906 if (sc->sc_flags.port_enabled) { 1907 value |= UPS_PORT_ENABLED; 1908 } 1909 if (sc->sc_flags.status_vbus && 1910 sc->sc_flags.status_bus_reset) { 1911 value |= UPS_CURRENT_CONNECT_STATUS; 1912 } 1913 if (sc->sc_flags.status_suspend) { 1914 value |= UPS_SUSPEND; 1915 } 1916 USETW(sc->sc_hub_temp.ps.wPortStatus, value); 1917 1918 value = 0; 1919 1920 if (sc->sc_flags.change_connect) { 1921 value |= UPS_C_CONNECT_STATUS; 1922 } 1923 if (sc->sc_flags.change_suspend) { 1924 value |= UPS_C_SUSPEND; 1925 } 1926 USETW(sc->sc_hub_temp.ps.wPortChange, value); 1927 len = sizeof(sc->sc_hub_temp.ps); 1928 goto tr_valid; 1929 1930 tr_handle_get_class_descriptor: 1931 if (value & 0xFF) { 1932 goto tr_stalled; 1933 } 1934 ptr = (const void *)&avr32dci_hubd; 1935 len = sizeof(avr32dci_hubd); 1936 goto tr_valid; 1937 1938 tr_stalled: 1939 err = USB_ERR_STALLED; 1940 tr_valid: 1941 done: 1942 *plength = len; 1943 *pptr = ptr; 1944 return (err); 1945 } 1946 1947 static void 1948 avr32dci_xfer_setup(struct usb_setup_params *parm) 1949 { 1950 const struct usb_hw_ep_profile *pf; 1951 struct avr32dci_softc *sc; 1952 struct usb_xfer *xfer; 1953 void *last_obj; 1954 uint32_t ntd; 1955 uint32_t n; 1956 uint8_t ep_no; 1957 1958 sc = AVR32_BUS2SC(parm->udev->bus); 1959 xfer = parm->curr_xfer; 1960 1961 /* 1962 * NOTE: This driver does not use any of the parameters that 1963 * are computed from the following values. Just set some 1964 * reasonable dummies: 1965 */ 1966 parm->hc_max_packet_size = 0x400; 1967 parm->hc_max_packet_count = 1; 1968 parm->hc_max_frame_size = 0x400; 1969 1970 usbd_transfer_setup_sub(parm); 1971 1972 /* 1973 * compute maximum number of TDs 1974 */ 1975 if ((xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) == UE_CONTROL) { 1976 1977 ntd = xfer->nframes + 1 /* STATUS */ + 1 /* SYNC 1 */ 1978 + 1 /* SYNC 2 */ ; 1979 } else { 1980 1981 ntd = xfer->nframes + 1 /* SYNC */ ; 1982 } 1983 1984 /* 1985 * check if "usbd_transfer_setup_sub" set an error 1986 */ 1987 if (parm->err) 1988 return; 1989 1990 /* 1991 * allocate transfer descriptors 1992 */ 1993 last_obj = NULL; 1994 1995 /* 1996 * get profile stuff 1997 */ 1998 ep_no = xfer->endpointno & UE_ADDR; 1999 avr32dci_get_hw_ep_profile(parm->udev, &pf, ep_no); 2000 2001 if (pf == NULL) { 2002 /* should not happen */ 2003 parm->err = USB_ERR_INVAL; 2004 return; 2005 } 2006 /* align data */ 2007 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1)); 2008 2009 for (n = 0; n != ntd; n++) { 2010 2011 struct avr32dci_td *td; 2012 2013 if (parm->buf) { 2014 uint32_t temp; 2015 2016 td = USB_ADD_BYTES(parm->buf, parm->size[0]); 2017 2018 /* init TD */ 2019 td->max_packet_size = xfer->max_packet_size; 2020 td->ep_no = ep_no; 2021 temp = pf->max_in_frame_size | pf->max_out_frame_size; 2022 td->bank_shift = 0; 2023 while ((temp /= 2)) 2024 td->bank_shift++; 2025 if (pf->support_multi_buffer) { 2026 td->support_multi_buffer = 1; 2027 } 2028 td->obj_next = last_obj; 2029 2030 last_obj = td; 2031 } 2032 parm->size[0] += sizeof(*td); 2033 } 2034 2035 xfer->td_start[0] = last_obj; 2036 } 2037 2038 static void 2039 avr32dci_xfer_unsetup(struct usb_xfer *xfer) 2040 { 2041 return; 2042 } 2043 2044 static void 2045 avr32dci_ep_init(struct usb_device *udev, struct usb_endpoint_descriptor *edesc, 2046 struct usb_endpoint *pipe) 2047 { 2048 struct avr32dci_softc *sc = AVR32_BUS2SC(udev->bus); 2049 2050 DPRINTFN(2, "pipe=%p, addr=%d, endpt=%d, mode=%d (%d,%d)\n", 2051 pipe, udev->address, 2052 edesc->bEndpointAddress, udev->flags.usb_mode, 2053 sc->sc_rt_addr, udev->device_index); 2054 2055 if (udev->device_index != sc->sc_rt_addr) { 2056 2057 if (udev->flags.usb_mode != USB_MODE_DEVICE) { 2058 /* not supported */ 2059 return; 2060 } 2061 if ((udev->speed != USB_SPEED_FULL) && 2062 (udev->speed != USB_SPEED_HIGH)) { 2063 /* not supported */ 2064 return; 2065 } 2066 if ((edesc->bmAttributes & UE_XFERTYPE) == UE_ISOCHRONOUS) 2067 pipe->methods = &avr32dci_device_isoc_fs_methods; 2068 else 2069 pipe->methods = &avr32dci_device_non_isoc_methods; 2070 } 2071 } 2072 2073 static void 2074 avr32dci_set_hw_power_sleep(struct usb_bus *bus, uint32_t state) 2075 { 2076 struct avr32dci_softc *sc = AVR32_BUS2SC(bus); 2077 2078 switch (state) { 2079 case USB_HW_POWER_SUSPEND: 2080 avr32dci_suspend(sc); 2081 break; 2082 case USB_HW_POWER_SHUTDOWN: 2083 avr32dci_uninit(sc); 2084 break; 2085 case USB_HW_POWER_RESUME: 2086 avr32dci_resume(sc); 2087 break; 2088 default: 2089 break; 2090 } 2091 } 2092 2093 struct usb_bus_methods avr32dci_bus_methods = 2094 { 2095 .endpoint_init = &avr32dci_ep_init, 2096 .xfer_setup = &avr32dci_xfer_setup, 2097 .xfer_unsetup = &avr32dci_xfer_unsetup, 2098 .get_hw_ep_profile = &avr32dci_get_hw_ep_profile, 2099 .set_stall = &avr32dci_set_stall, 2100 .clear_stall = &avr32dci_clear_stall, 2101 .roothub_exec = &avr32dci_roothub_exec, 2102 .xfer_poll = &avr32dci_do_poll, 2103 .set_hw_power_sleep = &avr32dci_set_hw_power_sleep, 2104 }; 2105