1 /*- 2 * Copyright (c) 2003 Marcel Moolenaar 3 * All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 */ 26 27 #include <sys/cdefs.h> 28 __FBSDID("$FreeBSD$"); 29 30 #include <sys/param.h> 31 #include <sys/systm.h> 32 #include <sys/bus.h> 33 #include <sys/conf.h> 34 #include <machine/bus.h> 35 36 #include <dev/uart/uart.h> 37 #include <dev/uart/uart_cpu.h> 38 #include <dev/uart/uart_bus.h> 39 40 #include <dev/ic/z8530.h> 41 42 #include "uart_if.h" 43 44 #define DEFAULT_RCLK 307200 45 46 /* Hack! */ 47 #ifdef __powerpc__ 48 #define UART_PCLK 0 49 #else 50 #define UART_PCLK MCB2_PCLK 51 #endif 52 53 /* Multiplexed I/O. */ 54 static __inline void 55 uart_setmreg(struct uart_bas *bas, int reg, int val) 56 { 57 58 uart_setreg(bas, REG_CTRL, reg); 59 uart_barrier(bas); 60 uart_setreg(bas, REG_CTRL, val); 61 } 62 63 static __inline uint8_t 64 uart_getmreg(struct uart_bas *bas, int reg) 65 { 66 67 uart_setreg(bas, REG_CTRL, reg); 68 uart_barrier(bas); 69 return (uart_getreg(bas, REG_CTRL)); 70 } 71 72 static int 73 z8530_divisor(int rclk, int baudrate) 74 { 75 int act_baud, divisor, error; 76 77 if (baudrate == 0) 78 return (-1); 79 80 divisor = (rclk + baudrate) / (baudrate << 1) - 2; 81 if (divisor < 0 || divisor >= 65536) 82 return (-1); 83 act_baud = rclk / 2 / (divisor + 2); 84 85 /* 10 times error in percent: */ 86 error = ((act_baud - baudrate) * 2000 / baudrate + 1) >> 1; 87 88 /* 3.0% maximum error tolerance: */ 89 if (error < -30 || error > 30) 90 return (-1); 91 92 return (divisor); 93 } 94 95 static int 96 z8530_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, 97 int parity, uint8_t *tpcp) 98 { 99 int divisor; 100 uint8_t mpm, rpc, tpc; 101 102 rpc = RPC_RXE; 103 mpm = MPM_CM16; 104 tpc = TPC_TXE | (*tpcp & (TPC_DTR | TPC_RTS)); 105 106 if (databits >= 8) { 107 rpc |= RPC_RB8; 108 tpc |= TPC_TB8; 109 } else if (databits == 7) { 110 rpc |= RPC_RB7; 111 tpc |= TPC_TB7; 112 } else if (databits == 6) { 113 rpc |= RPC_RB6; 114 tpc |= TPC_TB6; 115 } else { 116 rpc |= RPC_RB5; 117 tpc |= TPC_TB5; 118 } 119 mpm |= (stopbits > 1) ? MPM_SB2 : MPM_SB1; 120 switch (parity) { 121 case UART_PARITY_EVEN: mpm |= MPM_PE | MPM_EVEN; break; 122 case UART_PARITY_NONE: break; 123 case UART_PARITY_ODD: mpm |= MPM_PE; break; 124 default: return (EINVAL); 125 } 126 127 if (baudrate > 0) { 128 divisor = z8530_divisor(bas->rclk, baudrate); 129 if (divisor == -1) 130 return (EINVAL); 131 } else 132 divisor = -1; 133 134 uart_setmreg(bas, WR_MCB2, UART_PCLK); 135 uart_barrier(bas); 136 137 if (divisor >= 0) { 138 uart_setmreg(bas, WR_TCL, divisor & 0xff); 139 uart_barrier(bas); 140 uart_setmreg(bas, WR_TCH, (divisor >> 8) & 0xff); 141 uart_barrier(bas); 142 } 143 144 uart_setmreg(bas, WR_RPC, rpc); 145 uart_barrier(bas); 146 uart_setmreg(bas, WR_MPM, mpm); 147 uart_barrier(bas); 148 uart_setmreg(bas, WR_TPC, tpc); 149 uart_barrier(bas); 150 uart_setmreg(bas, WR_MCB2, UART_PCLK | MCB2_BRGE); 151 uart_barrier(bas); 152 *tpcp = tpc; 153 return (0); 154 } 155 156 static int 157 z8530_setup(struct uart_bas *bas, int baudrate, int databits, int stopbits, 158 int parity) 159 { 160 uint8_t tpc; 161 162 if (bas->rclk == 0) 163 bas->rclk = DEFAULT_RCLK; 164 165 /* Assume we don't need to perform a full hardware reset. */ 166 switch (bas->chan) { 167 case 1: 168 uart_setmreg(bas, WR_MIC, MIC_NV | MIC_CRA); 169 break; 170 case 2: 171 uart_setmreg(bas, WR_MIC, MIC_NV | MIC_CRB); 172 break; 173 } 174 uart_barrier(bas); 175 /* Set clock sources. */ 176 uart_setmreg(bas, WR_CMC, CMC_RC_BRG | CMC_TC_BRG); 177 uart_setmreg(bas, WR_MCB2, UART_PCLK); 178 uart_barrier(bas); 179 /* Set data encoding. */ 180 uart_setmreg(bas, WR_MCB1, MCB1_NRZ); 181 uart_barrier(bas); 182 183 tpc = TPC_DTR | TPC_RTS; 184 z8530_param(bas, baudrate, databits, stopbits, parity, &tpc); 185 return (int)tpc; 186 } 187 188 /* 189 * Low-level UART interface. 190 */ 191 static int z8530_probe(struct uart_bas *bas); 192 static void z8530_init(struct uart_bas *bas, int, int, int, int); 193 static void z8530_term(struct uart_bas *bas); 194 static void z8530_putc(struct uart_bas *bas, int); 195 static int z8530_rxready(struct uart_bas *bas); 196 static int z8530_getc(struct uart_bas *bas, struct mtx *); 197 198 static struct uart_ops uart_z8530_ops = { 199 .probe = z8530_probe, 200 .init = z8530_init, 201 .term = z8530_term, 202 .putc = z8530_putc, 203 .rxready = z8530_rxready, 204 .getc = z8530_getc, 205 }; 206 207 static int 208 z8530_probe(struct uart_bas *bas) 209 { 210 211 return (0); 212 } 213 214 static void 215 z8530_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, 216 int parity) 217 { 218 219 z8530_setup(bas, baudrate, databits, stopbits, parity); 220 } 221 222 static void 223 z8530_term(struct uart_bas *bas) 224 { 225 } 226 227 static void 228 z8530_putc(struct uart_bas *bas, int c) 229 { 230 231 while (!(uart_getreg(bas, REG_CTRL) & BES_TXE)) 232 ; 233 uart_setreg(bas, REG_DATA, c); 234 uart_barrier(bas); 235 } 236 237 static int 238 z8530_rxready(struct uart_bas *bas) 239 { 240 241 return ((uart_getreg(bas, REG_CTRL) & BES_RXA) != 0 ? 1 : 0); 242 } 243 244 static int 245 z8530_getc(struct uart_bas *bas, struct mtx *hwmtx) 246 { 247 int c; 248 249 uart_lock(hwmtx); 250 251 while (!(uart_getreg(bas, REG_CTRL) & BES_RXA)) { 252 uart_unlock(hwmtx); 253 DELAY(10); 254 uart_lock(hwmtx); 255 } 256 257 c = uart_getreg(bas, REG_DATA); 258 259 uart_unlock(hwmtx); 260 261 return (c); 262 } 263 264 /* 265 * High-level UART interface. 266 */ 267 struct z8530_softc { 268 struct uart_softc base; 269 uint8_t tpc; 270 uint8_t txidle; 271 }; 272 273 static int z8530_bus_attach(struct uart_softc *); 274 static int z8530_bus_detach(struct uart_softc *); 275 static int z8530_bus_flush(struct uart_softc *, int); 276 static int z8530_bus_getsig(struct uart_softc *); 277 static int z8530_bus_ioctl(struct uart_softc *, int, intptr_t); 278 static int z8530_bus_ipend(struct uart_softc *); 279 static int z8530_bus_param(struct uart_softc *, int, int, int, int); 280 static int z8530_bus_probe(struct uart_softc *); 281 static int z8530_bus_receive(struct uart_softc *); 282 static int z8530_bus_setsig(struct uart_softc *, int); 283 static int z8530_bus_transmit(struct uart_softc *); 284 285 static kobj_method_t z8530_methods[] = { 286 KOBJMETHOD(uart_attach, z8530_bus_attach), 287 KOBJMETHOD(uart_detach, z8530_bus_detach), 288 KOBJMETHOD(uart_flush, z8530_bus_flush), 289 KOBJMETHOD(uart_getsig, z8530_bus_getsig), 290 KOBJMETHOD(uart_ioctl, z8530_bus_ioctl), 291 KOBJMETHOD(uart_ipend, z8530_bus_ipend), 292 KOBJMETHOD(uart_param, z8530_bus_param), 293 KOBJMETHOD(uart_probe, z8530_bus_probe), 294 KOBJMETHOD(uart_receive, z8530_bus_receive), 295 KOBJMETHOD(uart_setsig, z8530_bus_setsig), 296 KOBJMETHOD(uart_transmit, z8530_bus_transmit), 297 { 0, 0 } 298 }; 299 300 struct uart_class uart_z8530_class = { 301 "z8530", 302 z8530_methods, 303 sizeof(struct z8530_softc), 304 .uc_ops = &uart_z8530_ops, 305 .uc_range = 2, 306 .uc_rclk = DEFAULT_RCLK 307 }; 308 309 #define SIGCHG(c, i, s, d) \ 310 if (c) { \ 311 i |= (i & s) ? s : s | d; \ 312 } else { \ 313 i = (i & s) ? (i & ~s) | d : i; \ 314 } 315 316 static int 317 z8530_bus_attach(struct uart_softc *sc) 318 { 319 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 320 struct uart_bas *bas; 321 struct uart_devinfo *di; 322 323 bas = &sc->sc_bas; 324 if (sc->sc_sysdev != NULL) { 325 di = sc->sc_sysdev; 326 z8530->tpc = TPC_DTR|TPC_RTS; 327 z8530_param(bas, di->baudrate, di->databits, di->stopbits, 328 di->parity, &z8530->tpc); 329 } else { 330 z8530->tpc = z8530_setup(bas, 9600, 8, 1, UART_PARITY_NONE); 331 z8530->tpc &= ~(TPC_DTR|TPC_RTS); 332 } 333 z8530->txidle = 1; /* Report SER_INT_TXIDLE. */ 334 335 sc->sc_rxfifosz = 3; 336 sc->sc_txfifosz = 1; 337 338 (void)z8530_bus_getsig(sc); 339 340 uart_setmreg(bas, WR_IC, IC_BRK | IC_CTS | IC_DCD); 341 uart_barrier(bas); 342 uart_setmreg(bas, WR_IDT, IDT_XIE | IDT_TIE | IDT_RIA); 343 uart_barrier(bas); 344 uart_setmreg(bas, WR_IV, 0); 345 uart_barrier(bas); 346 uart_setmreg(bas, WR_TPC, z8530->tpc); 347 uart_barrier(bas); 348 uart_setmreg(bas, WR_MIC, MIC_NV | MIC_MIE); 349 uart_barrier(bas); 350 return (0); 351 } 352 353 static int 354 z8530_bus_detach(struct uart_softc *sc) 355 { 356 357 return (0); 358 } 359 360 static int 361 z8530_bus_flush(struct uart_softc *sc, int what) 362 { 363 364 return (0); 365 } 366 367 static int 368 z8530_bus_getsig(struct uart_softc *sc) 369 { 370 uint32_t new, old, sig; 371 uint8_t bes; 372 373 do { 374 old = sc->sc_hwsig; 375 sig = old; 376 uart_lock(sc->sc_hwmtx); 377 bes = uart_getmreg(&sc->sc_bas, RR_BES); 378 uart_unlock(sc->sc_hwmtx); 379 SIGCHG(bes & BES_CTS, sig, SER_CTS, SER_DCTS); 380 SIGCHG(bes & BES_DCD, sig, SER_DCD, SER_DDCD); 381 SIGCHG(bes & BES_SYNC, sig, SER_DSR, SER_DDSR); 382 new = sig & ~SER_MASK_DELTA; 383 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 384 return (sig); 385 } 386 387 static int 388 z8530_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) 389 { 390 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 391 struct uart_bas *bas; 392 int baudrate, divisor, error; 393 394 bas = &sc->sc_bas; 395 error = 0; 396 uart_lock(sc->sc_hwmtx); 397 switch (request) { 398 case UART_IOCTL_BREAK: 399 if (data) 400 z8530->tpc |= TPC_BRK; 401 else 402 z8530->tpc &= ~TPC_BRK; 403 uart_setmreg(bas, WR_TPC, z8530->tpc); 404 uart_barrier(bas); 405 break; 406 case UART_IOCTL_BAUD: 407 divisor = uart_getmreg(bas, RR_TCH); 408 divisor = (divisor << 8) | uart_getmreg(bas, RR_TCL); 409 baudrate = bas->rclk / 2 / (divisor + 2); 410 *(int*)data = baudrate; 411 break; 412 default: 413 error = EINVAL; 414 break; 415 } 416 uart_unlock(sc->sc_hwmtx); 417 return (error); 418 } 419 420 static int 421 z8530_bus_ipend(struct uart_softc *sc) 422 { 423 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 424 struct uart_bas *bas; 425 int ipend; 426 uint32_t sig; 427 uint8_t bes, ip, iv, src; 428 429 bas = &sc->sc_bas; 430 ipend = 0; 431 432 uart_lock(sc->sc_hwmtx); 433 switch (bas->chan) { 434 case 1: 435 ip = uart_getmreg(bas, RR_IP); 436 break; 437 case 2: /* XXX hack!!! */ 438 iv = uart_getmreg(bas, RR_IV) & 0x0E; 439 switch (iv) { 440 case IV_TEB: ip = IP_TIA; break; 441 case IV_XSB: ip = IP_SIA; break; 442 case IV_RAB: ip = IP_RIA; break; 443 default: ip = 0; break; 444 } 445 break; 446 default: 447 ip = 0; 448 break; 449 } 450 451 if (ip & IP_RIA) 452 ipend |= SER_INT_RXREADY; 453 454 if (ip & IP_TIA) { 455 uart_setreg(bas, REG_CTRL, CR_RSTTXI); 456 uart_barrier(bas); 457 if (z8530->txidle) { 458 ipend |= SER_INT_TXIDLE; 459 z8530->txidle = 0; /* Mask SER_INT_TXIDLE. */ 460 } 461 } 462 463 if (ip & IP_SIA) { 464 uart_setreg(bas, REG_CTRL, CR_RSTXSI); 465 uart_barrier(bas); 466 bes = uart_getmreg(bas, RR_BES); 467 if (bes & BES_BRK) 468 ipend |= SER_INT_BREAK; 469 sig = sc->sc_hwsig; 470 SIGCHG(bes & BES_CTS, sig, SER_CTS, SER_DCTS); 471 SIGCHG(bes & BES_DCD, sig, SER_DCD, SER_DDCD); 472 SIGCHG(bes & BES_SYNC, sig, SER_DSR, SER_DDSR); 473 if (sig & SER_MASK_DELTA) 474 ipend |= SER_INT_SIGCHG; 475 src = uart_getmreg(bas, RR_SRC); 476 if (src & SRC_OVR) { 477 uart_setreg(bas, REG_CTRL, CR_RSTERR); 478 uart_barrier(bas); 479 ipend |= SER_INT_OVERRUN; 480 } 481 } 482 483 if (ipend) { 484 uart_setreg(bas, REG_CTRL, CR_RSTIUS); 485 uart_barrier(bas); 486 } 487 488 uart_unlock(sc->sc_hwmtx); 489 490 return (ipend); 491 } 492 493 static int 494 z8530_bus_param(struct uart_softc *sc, int baudrate, int databits, 495 int stopbits, int parity) 496 { 497 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 498 int error; 499 500 uart_lock(sc->sc_hwmtx); 501 error = z8530_param(&sc->sc_bas, baudrate, databits, stopbits, parity, 502 &z8530->tpc); 503 uart_unlock(sc->sc_hwmtx); 504 return (error); 505 } 506 507 static int 508 z8530_bus_probe(struct uart_softc *sc) 509 { 510 char buf[80]; 511 int error; 512 char ch; 513 514 error = z8530_probe(&sc->sc_bas); 515 if (error) 516 return (error); 517 518 ch = sc->sc_bas.chan - 1 + 'A'; 519 520 snprintf(buf, sizeof(buf), "z8530, channel %c", ch); 521 device_set_desc_copy(sc->sc_dev, buf); 522 return (0); 523 } 524 525 static int 526 z8530_bus_receive(struct uart_softc *sc) 527 { 528 struct uart_bas *bas; 529 int xc; 530 uint8_t bes, src; 531 532 bas = &sc->sc_bas; 533 uart_lock(sc->sc_hwmtx); 534 bes = uart_getmreg(bas, RR_BES); 535 while (bes & BES_RXA) { 536 if (uart_rx_full(sc)) { 537 sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN; 538 break; 539 } 540 xc = uart_getreg(bas, REG_DATA); 541 uart_barrier(bas); 542 src = uart_getmreg(bas, RR_SRC); 543 if (src & SRC_FE) 544 xc |= UART_STAT_FRAMERR; 545 if (src & SRC_PE) 546 xc |= UART_STAT_PARERR; 547 if (src & SRC_OVR) 548 xc |= UART_STAT_OVERRUN; 549 uart_rx_put(sc, xc); 550 if (src & (SRC_FE | SRC_PE | SRC_OVR)) { 551 uart_setreg(bas, REG_CTRL, CR_RSTERR); 552 uart_barrier(bas); 553 } 554 bes = uart_getmreg(bas, RR_BES); 555 } 556 /* Discard everything left in the Rx FIFO. */ 557 while (bes & BES_RXA) { 558 (void)uart_getreg(bas, REG_DATA); 559 uart_barrier(bas); 560 src = uart_getmreg(bas, RR_SRC); 561 if (src & (SRC_FE | SRC_PE | SRC_OVR)) { 562 uart_setreg(bas, REG_CTRL, CR_RSTERR); 563 uart_barrier(bas); 564 } 565 bes = uart_getmreg(bas, RR_BES); 566 } 567 uart_unlock(sc->sc_hwmtx); 568 return (0); 569 } 570 571 static int 572 z8530_bus_setsig(struct uart_softc *sc, int sig) 573 { 574 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 575 struct uart_bas *bas; 576 uint32_t new, old; 577 578 bas = &sc->sc_bas; 579 do { 580 old = sc->sc_hwsig; 581 new = old; 582 if (sig & SER_DDTR) { 583 SIGCHG(sig & SER_DTR, new, SER_DTR, 584 SER_DDTR); 585 } 586 if (sig & SER_DRTS) { 587 SIGCHG(sig & SER_RTS, new, SER_RTS, 588 SER_DRTS); 589 } 590 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 591 592 uart_lock(sc->sc_hwmtx); 593 if (new & SER_DTR) 594 z8530->tpc |= TPC_DTR; 595 else 596 z8530->tpc &= ~TPC_DTR; 597 if (new & SER_RTS) 598 z8530->tpc |= TPC_RTS; 599 else 600 z8530->tpc &= ~TPC_RTS; 601 uart_setmreg(bas, WR_TPC, z8530->tpc); 602 uart_barrier(bas); 603 uart_unlock(sc->sc_hwmtx); 604 return (0); 605 } 606 607 static int 608 z8530_bus_transmit(struct uart_softc *sc) 609 { 610 struct z8530_softc *z8530 = (struct z8530_softc*)sc; 611 struct uart_bas *bas; 612 613 bas = &sc->sc_bas; 614 uart_lock(sc->sc_hwmtx); 615 while (!(uart_getmreg(bas, RR_BES) & BES_TXE)) 616 ; 617 uart_setreg(bas, REG_DATA, sc->sc_txbuf[0]); 618 uart_barrier(bas); 619 sc->sc_txbusy = 1; 620 z8530->txidle = 1; /* Report SER_INT_TXIDLE again. */ 621 uart_unlock(sc->sc_hwmtx); 622 return (0); 623 } 624