1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause-FreeBSD 3 * 4 * Copyright (c) 2013 Ian Lepore 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include "opt_platform.h" 30 31 #include <sys/cdefs.h> 32 __FBSDID("$FreeBSD$"); 33 34 #include <sys/param.h> 35 #include <sys/systm.h> 36 #include <sys/bus.h> 37 #include <sys/conf.h> 38 #include <sys/kernel.h> 39 #include <sys/sysctl.h> 40 #include <machine/bus.h> 41 42 #include <arm/ti/ti_prcm.h> 43 #include <arm/ti/ti_hwmods.h> 44 45 #include <dev/fdt/fdt_common.h> 46 #include <dev/ofw/ofw_bus.h> 47 #include <dev/ofw/ofw_bus_subr.h> 48 49 #include <dev/uart/uart.h> 50 #include <dev/uart/uart_cpu.h> 51 #include <dev/uart/uart_cpu_fdt.h> 52 #include <dev/uart/uart_bus.h> 53 #include <dev/uart/uart_dev_ns8250.h> 54 55 #include "uart_if.h" 56 57 /* 58 * High-level UART interface. 59 */ 60 struct ti8250_softc { 61 struct ns8250_softc ns8250_base; 62 /*uint32_t mystuff;*/ 63 }; 64 65 #define MDR1_REG 8 66 #define MDR1_MODE_UART 0 67 #define MDR1_MODE_DISABLE 7 68 #define SYSCC_REG 15 69 #define SYSCC_SOFTRESET (1 << 1) 70 #define SYSS_REG 16 71 #define SYSS_STATUS_RESETDONE (1 << 0) 72 73 static int 74 ti8250_bus_probe(struct uart_softc *sc) 75 { 76 int status; 77 clk_ident_t clkid; 78 79 /* Enable clocks for this device. We can't continue if that fails. */ 80 clkid = ti_hwmods_get_clock(sc->sc_dev); 81 if (clkid == INVALID_CLK_IDENT) { 82 device_printf(sc->sc_dev, 83 "failed to get clock based on hwmods\n"); 84 clkid = UART1_CLK + device_get_unit(sc->sc_dev); 85 } 86 if ((status = ti_prcm_clk_enable(clkid)) != 0) 87 return (status); 88 89 /* 90 * Set the hardware to disabled mode, do a full device reset, then set 91 * it to uart mode. Most devices will be reset-and-disabled already, 92 * but you never know what a bootloader might have done. 93 */ 94 uart_setreg(&sc->sc_bas, MDR1_REG, MDR1_MODE_DISABLE); 95 uart_setreg(&sc->sc_bas, SYSCC_REG, SYSCC_SOFTRESET); 96 while (uart_getreg(&sc->sc_bas, SYSS_REG) & SYSS_STATUS_RESETDONE) 97 continue; 98 uart_setreg(&sc->sc_bas, MDR1_REG, MDR1_MODE_UART); 99 100 status = ns8250_bus_probe(sc); 101 if (status == 0) 102 device_set_desc(sc->sc_dev, "TI UART (16550 compatible)"); 103 104 return (status); 105 } 106 107 static kobj_method_t ti8250_methods[] = { 108 KOBJMETHOD(uart_probe, ti8250_bus_probe), 109 110 KOBJMETHOD(uart_attach, ns8250_bus_attach), 111 KOBJMETHOD(uart_detach, ns8250_bus_detach), 112 KOBJMETHOD(uart_flush, ns8250_bus_flush), 113 KOBJMETHOD(uart_getsig, ns8250_bus_getsig), 114 KOBJMETHOD(uart_ioctl, ns8250_bus_ioctl), 115 KOBJMETHOD(uart_ipend, ns8250_bus_ipend), 116 KOBJMETHOD(uart_param, ns8250_bus_param), 117 KOBJMETHOD(uart_receive, ns8250_bus_receive), 118 KOBJMETHOD(uart_setsig, ns8250_bus_setsig), 119 KOBJMETHOD(uart_transmit, ns8250_bus_transmit), 120 KOBJMETHOD_END 121 }; 122 123 static struct uart_class uart_ti8250_class = { 124 "ti8250", 125 ti8250_methods, 126 sizeof(struct ti8250_softc), 127 .uc_ops = &uart_ns8250_ops, 128 .uc_range = 0x88, 129 .uc_rclk = 48000000, 130 .uc_rshift = 2 131 }; 132 static struct ofw_compat_data compat_data[] = { 133 {"ti,ns16550", (uintptr_t)&uart_ti8250_class}, 134 {"ti,omap3-uart", (uintptr_t)&uart_ti8250_class}, 135 {"ti,omap4-uart", (uintptr_t)&uart_ti8250_class}, 136 {NULL, (uintptr_t)NULL}, 137 }; 138 UART_FDT_CLASS_AND_DEVICE(compat_data); 139