1 /*- 2 * SPDX-License-Identifier: BSD-2-Clause 3 * 4 * Copyright (c) 2006 Juniper Networks 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27 */ 28 29 #include <sys/param.h> 30 #include <sys/systm.h> 31 #include <sys/bus.h> 32 #include <sys/conf.h> 33 #include <sys/endian.h> 34 #include <machine/bus.h> 35 36 #include <dev/ic/quicc.h> 37 38 #include <dev/uart/uart.h> 39 #include <dev/uart/uart_cpu.h> 40 #include <dev/uart/uart_bus.h> 41 42 #include "uart_if.h" 43 44 #define DEFAULT_RCLK ((266000000 * 2) / 16) 45 46 #define quicc_read2(bas, reg) \ 47 bus_space_read_2((bas)->bst, (bas)->bsh, reg) 48 #define quicc_read4(bas, reg) \ 49 bus_space_read_4((bas)->bst, (bas)->bsh, reg) 50 51 #define quicc_write2(bas, reg, val) \ 52 bus_space_write_2((bas)->bst, (bas)->bsh, reg, val) 53 #define quicc_write4(bas, reg, val) \ 54 bus_space_write_4((bas)->bst, (bas)->bsh, reg, val) 55 56 static int 57 quicc_divisor(int rclk, int baudrate) 58 { 59 int act_baud, divisor, error; 60 61 if (baudrate == 0) 62 return (-1); 63 64 divisor = rclk / baudrate / 16; 65 if (divisor > 4096) 66 divisor = ((divisor >> 3) - 2) | 1; 67 else if (divisor >= 0) 68 divisor = (divisor - 1) << 1; 69 if (divisor < 0 || divisor >= 8192) 70 return (-1); 71 act_baud = rclk / (((divisor >> 1) + 1) << ((divisor & 1) ? 8 : 4)); 72 73 /* 10 times error in percent: */ 74 error = ((act_baud - baudrate) * 2000 / baudrate + 1) >> 1; 75 76 /* 3.0% maximum error tolerance: */ 77 if (error < -30 || error > 30) 78 return (-1); 79 80 return (divisor); 81 } 82 83 static int 84 quicc_param(struct uart_bas *bas, int baudrate, int databits, int stopbits, 85 int parity) 86 { 87 int divisor; 88 uint16_t psmr; 89 90 if (baudrate > 0) { 91 divisor = quicc_divisor(bas->rclk, baudrate); 92 if (divisor == -1) 93 return (EINVAL); 94 quicc_write4(bas, QUICC_REG_BRG(bas->chan - 1), 95 divisor | 0x10000); 96 } 97 98 psmr = 0; 99 switch (databits) { 100 case 5: psmr |= 0x0000; break; 101 case 6: psmr |= 0x1000; break; 102 case 7: psmr |= 0x2000; break; 103 case 8: psmr |= 0x3000; break; 104 default: return (EINVAL); 105 } 106 switch (stopbits) { 107 case 1: psmr |= 0x0000; break; 108 case 2: psmr |= 0x4000; break; 109 default: return (EINVAL); 110 } 111 switch (parity) { 112 case UART_PARITY_EVEN: psmr |= 0x1a; break; 113 case UART_PARITY_MARK: psmr |= 0x1f; break; 114 case UART_PARITY_NONE: psmr |= 0x00; break; 115 case UART_PARITY_ODD: psmr |= 0x10; break; 116 case UART_PARITY_SPACE: psmr |= 0x15; break; 117 default: return (EINVAL); 118 } 119 quicc_write2(bas, QUICC_REG_SCC_PSMR(bas->chan - 1), psmr); 120 return (0); 121 } 122 123 static void 124 quicc_setup(struct uart_bas *bas, int baudrate, int databits, int stopbits, 125 int parity) 126 { 127 128 if (bas->rclk == 0) 129 bas->rclk = DEFAULT_RCLK; 130 131 /* 132 * GSMR_L = 0x00028034 133 * GSMR_H = 0x00000020 134 */ 135 quicc_param(bas, baudrate, databits, stopbits, parity); 136 137 quicc_write2(bas, QUICC_REG_SCC_SCCE(bas->chan - 1), ~0); 138 quicc_write2(bas, QUICC_REG_SCC_SCCM(bas->chan - 1), 0x0027); 139 } 140 141 /* 142 * Low-level UART interface. 143 */ 144 static int quicc_probe(struct uart_bas *bas); 145 static void quicc_init(struct uart_bas *bas, int, int, int, int); 146 static void quicc_term(struct uart_bas *bas); 147 static void quicc_putc(struct uart_bas *bas, int); 148 static int quicc_rxready(struct uart_bas *bas); 149 static int quicc_getc(struct uart_bas *bas, struct mtx *); 150 151 static struct uart_ops uart_quicc_ops = { 152 .probe = quicc_probe, 153 .init = quicc_init, 154 .term = quicc_term, 155 .putc = quicc_putc, 156 .rxready = quicc_rxready, 157 .getc = quicc_getc, 158 }; 159 160 static int 161 quicc_probe(struct uart_bas *bas) 162 { 163 164 return (0); 165 } 166 167 static void 168 quicc_init(struct uart_bas *bas, int baudrate, int databits, int stopbits, 169 int parity) 170 { 171 172 quicc_setup(bas, baudrate, databits, stopbits, parity); 173 } 174 175 static void 176 quicc_term(struct uart_bas *bas) 177 { 178 } 179 180 static void 181 quicc_putc(struct uart_bas *bas, int c) 182 { 183 int unit; 184 uint16_t toseq; 185 186 unit = bas->chan - 1; 187 while (quicc_read2(bas, QUICC_PRAM_SCC_UART_TOSEQ(unit)) & 0x2000) 188 DELAY(10); 189 190 toseq = 0x2000 | (c & 0xff); 191 quicc_write2(bas, QUICC_PRAM_SCC_UART_TOSEQ(unit), toseq); 192 } 193 194 static int 195 quicc_rxready(struct uart_bas *bas) 196 { 197 uint16_t rb; 198 199 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 200 return ((quicc_read2(bas, rb) & 0x8000) ? 0 : 1); 201 } 202 203 static int 204 quicc_getc(struct uart_bas *bas, struct mtx *hwmtx) 205 { 206 volatile char *buf; 207 int c; 208 uint16_t rb, sc; 209 210 uart_lock(hwmtx); 211 212 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 213 214 while ((sc = quicc_read2(bas, rb)) & 0x8000) { 215 uart_unlock(hwmtx); 216 DELAY(4); 217 uart_lock(hwmtx); 218 } 219 220 buf = (void *)(uintptr_t)quicc_read4(bas, rb + 4); 221 c = *buf; 222 quicc_write2(bas, rb, sc | 0x8000); 223 224 uart_unlock(hwmtx); 225 226 return (c); 227 } 228 229 /* 230 * High-level UART interface. 231 */ 232 struct quicc_softc { 233 struct uart_softc base; 234 }; 235 236 static int quicc_bus_attach(struct uart_softc *); 237 static int quicc_bus_detach(struct uart_softc *); 238 static int quicc_bus_flush(struct uart_softc *, int); 239 static int quicc_bus_getsig(struct uart_softc *); 240 static int quicc_bus_ioctl(struct uart_softc *, int, intptr_t); 241 static int quicc_bus_ipend(struct uart_softc *); 242 static int quicc_bus_param(struct uart_softc *, int, int, int, int); 243 static int quicc_bus_probe(struct uart_softc *); 244 static int quicc_bus_receive(struct uart_softc *); 245 static int quicc_bus_setsig(struct uart_softc *, int); 246 static int quicc_bus_transmit(struct uart_softc *); 247 static void quicc_bus_grab(struct uart_softc *); 248 static void quicc_bus_ungrab(struct uart_softc *); 249 250 static kobj_method_t quicc_methods[] = { 251 KOBJMETHOD(uart_attach, quicc_bus_attach), 252 KOBJMETHOD(uart_detach, quicc_bus_detach), 253 KOBJMETHOD(uart_flush, quicc_bus_flush), 254 KOBJMETHOD(uart_getsig, quicc_bus_getsig), 255 KOBJMETHOD(uart_ioctl, quicc_bus_ioctl), 256 KOBJMETHOD(uart_ipend, quicc_bus_ipend), 257 KOBJMETHOD(uart_param, quicc_bus_param), 258 KOBJMETHOD(uart_probe, quicc_bus_probe), 259 KOBJMETHOD(uart_receive, quicc_bus_receive), 260 KOBJMETHOD(uart_setsig, quicc_bus_setsig), 261 KOBJMETHOD(uart_transmit, quicc_bus_transmit), 262 KOBJMETHOD(uart_grab, quicc_bus_grab), 263 KOBJMETHOD(uart_ungrab, quicc_bus_ungrab), 264 { 0, 0 } 265 }; 266 267 struct uart_class uart_quicc_class = { 268 "quicc", 269 quicc_methods, 270 sizeof(struct quicc_softc), 271 .uc_ops = &uart_quicc_ops, 272 .uc_range = 2, 273 .uc_rclk = DEFAULT_RCLK, 274 .uc_rshift = 0 275 }; 276 UART_CLASS(uart_quicc_class); 277 278 #define SIGCHG(c, i, s, d) \ 279 if (c) { \ 280 i |= (i & s) ? s : s | d; \ 281 } else { \ 282 i = (i & s) ? (i & ~s) | d : i; \ 283 } 284 285 static int 286 quicc_bus_attach(struct uart_softc *sc) 287 { 288 struct uart_bas *bas; 289 struct uart_devinfo *di; 290 uint16_t st, rb; 291 292 bas = &sc->sc_bas; 293 if (sc->sc_sysdev != NULL) { 294 di = sc->sc_sysdev; 295 quicc_param(bas, di->baudrate, di->databits, di->stopbits, 296 di->parity); 297 } else { 298 quicc_setup(bas, 9600, 8, 1, UART_PARITY_NONE); 299 } 300 301 /* Enable interrupts on the receive buffer. */ 302 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 303 st = quicc_read2(bas, rb); 304 quicc_write2(bas, rb, st | 0x9000); 305 306 (void)quicc_bus_getsig(sc); 307 308 return (0); 309 } 310 311 static int 312 quicc_bus_detach(struct uart_softc *sc) 313 { 314 315 return (0); 316 } 317 318 static int 319 quicc_bus_flush(struct uart_softc *sc, int what) 320 { 321 322 return (0); 323 } 324 325 static int 326 quicc_bus_getsig(struct uart_softc *sc) 327 { 328 uint32_t new, old, sig; 329 uint32_t dummy; 330 331 do { 332 old = sc->sc_hwsig; 333 sig = old; 334 uart_lock(sc->sc_hwmtx); 335 /* XXX SIGNALS */ 336 dummy = 0; 337 uart_unlock(sc->sc_hwmtx); 338 SIGCHG(dummy, sig, SER_CTS, SER_DCTS); 339 SIGCHG(dummy, sig, SER_DCD, SER_DDCD); 340 SIGCHG(dummy, sig, SER_DSR, SER_DDSR); 341 new = sig & ~SER_MASK_DELTA; 342 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 343 return (sig); 344 } 345 346 static int 347 quicc_bus_ioctl(struct uart_softc *sc, int request, intptr_t data) 348 { 349 struct uart_bas *bas; 350 uint32_t brg; 351 int baudrate, error; 352 353 bas = &sc->sc_bas; 354 error = 0; 355 uart_lock(sc->sc_hwmtx); 356 switch (request) { 357 case UART_IOCTL_BREAK: 358 break; 359 case UART_IOCTL_BAUD: 360 brg = quicc_read4(bas, QUICC_REG_BRG(bas->chan - 1)) & 0x1fff; 361 brg = (brg & 1) ? (brg + 1) << 3 : (brg + 2) >> 1; 362 baudrate = bas->rclk / (brg * 16); 363 *(int*)data = baudrate; 364 break; 365 default: 366 error = EINVAL; 367 break; 368 } 369 uart_unlock(sc->sc_hwmtx); 370 return (error); 371 } 372 373 static int 374 quicc_bus_ipend(struct uart_softc *sc) 375 { 376 struct uart_bas *bas; 377 int ipend; 378 uint16_t scce; 379 380 bas = &sc->sc_bas; 381 ipend = 0; 382 383 uart_lock(sc->sc_hwmtx); 384 scce = quicc_read2(bas, QUICC_REG_SCC_SCCE(bas->chan - 1)); 385 quicc_write2(bas, QUICC_REG_SCC_SCCE(bas->chan - 1), ~0); 386 uart_unlock(sc->sc_hwmtx); 387 if (scce & 0x0001) 388 ipend |= SER_INT_RXREADY; 389 if (scce & 0x0002) 390 ipend |= SER_INT_TXIDLE; 391 if (scce & 0x0004) 392 ipend |= SER_INT_OVERRUN; 393 if (scce & 0x0020) 394 ipend |= SER_INT_BREAK; 395 /* XXX SIGNALS */ 396 return (ipend); 397 } 398 399 static int 400 quicc_bus_param(struct uart_softc *sc, int baudrate, int databits, 401 int stopbits, int parity) 402 { 403 int error; 404 405 uart_lock(sc->sc_hwmtx); 406 error = quicc_param(&sc->sc_bas, baudrate, databits, stopbits, 407 parity); 408 uart_unlock(sc->sc_hwmtx); 409 return (error); 410 } 411 412 static int 413 quicc_bus_probe(struct uart_softc *sc) 414 { 415 int error; 416 417 error = quicc_probe(&sc->sc_bas); 418 if (error) 419 return (error); 420 421 sc->sc_rxfifosz = 1; 422 sc->sc_txfifosz = 1; 423 424 device_set_descf(sc->sc_dev, "quicc, channel %d", sc->sc_bas.chan); 425 return (0); 426 } 427 428 static int 429 quicc_bus_receive(struct uart_softc *sc) 430 { 431 struct uart_bas *bas; 432 volatile char *buf; 433 uint16_t st, rb; 434 435 bas = &sc->sc_bas; 436 uart_lock(sc->sc_hwmtx); 437 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 438 st = quicc_read2(bas, rb); 439 buf = (void *)(uintptr_t)quicc_read4(bas, rb + 4); 440 uart_rx_put(sc, *buf); 441 quicc_write2(bas, rb, st | 0x9000); 442 uart_unlock(sc->sc_hwmtx); 443 return (0); 444 } 445 446 static int 447 quicc_bus_setsig(struct uart_softc *sc, int sig) 448 { 449 uint32_t new, old; 450 451 do { 452 old = sc->sc_hwsig; 453 new = old; 454 if (sig & SER_DDTR) { 455 SIGCHG(sig & SER_DTR, new, SER_DTR, 456 SER_DDTR); 457 } 458 if (sig & SER_DRTS) { 459 SIGCHG(sig & SER_RTS, new, SER_RTS, 460 SER_DRTS); 461 } 462 } while (!atomic_cmpset_32(&sc->sc_hwsig, old, new)); 463 464 uart_lock(sc->sc_hwmtx); 465 /* XXX SIGNALS */ 466 uart_unlock(sc->sc_hwmtx); 467 return (0); 468 } 469 470 static int 471 quicc_bus_transmit(struct uart_softc *sc) 472 { 473 volatile char *buf; 474 struct uart_bas *bas; 475 uint16_t st, tb; 476 477 bas = &sc->sc_bas; 478 uart_lock(sc->sc_hwmtx); 479 tb = quicc_read2(bas, QUICC_PRAM_SCC_TBASE(bas->chan - 1)); 480 st = quicc_read2(bas, tb); 481 buf = (void *)(uintptr_t)quicc_read4(bas, tb + 4); 482 *buf = sc->sc_txbuf[0]; 483 quicc_write2(bas, tb + 2, 1); 484 quicc_write2(bas, tb, st | 0x9000); 485 sc->sc_txbusy = 1; 486 uart_unlock(sc->sc_hwmtx); 487 return (0); 488 } 489 490 static void 491 quicc_bus_grab(struct uart_softc *sc) 492 { 493 struct uart_bas *bas; 494 uint16_t st, rb; 495 496 /* Disable interrupts on the receive buffer. */ 497 bas = &sc->sc_bas; 498 uart_lock(sc->sc_hwmtx); 499 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 500 st = quicc_read2(bas, rb); 501 quicc_write2(bas, rb, st & ~0x9000); 502 uart_unlock(sc->sc_hwmtx); 503 } 504 505 static void 506 quicc_bus_ungrab(struct uart_softc *sc) 507 { 508 struct uart_bas *bas; 509 uint16_t st, rb; 510 511 /* Enable interrupts on the receive buffer. */ 512 bas = &sc->sc_bas; 513 uart_lock(sc->sc_hwmtx); 514 rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1)); 515 st = quicc_read2(bas, rb); 516 quicc_write2(bas, rb, st | 0x9000); 517 uart_unlock(sc->sc_hwmtx); 518 } 519